01434265f6
* Disable USART in sleep * Restore UART state on suspend/resume * FuriHal: Enable stop mode and add insomnia to I2C and SPI * Remove IDLE interrupt * FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep * FuriHal: tie stop mode debug with debug rtc flag * FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag * FuriHal: move resource init to early stage * Add EXTI pending check, enable debug traps with compile-time flag * Wrap sleep debug functions in conditional compilation * Remove erroneous changed * Do not use CSS, remove it from everywhere * Enable/disable USB on VBUS connect (prototype) * FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores * FuriHal: honor c1 LMPS * USB mode switch fix * Applications: add flags and insomnia bypass system * Correct spelling * FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api * FuriHal: extra check on reinit request * FuriHal: rename gpio_display_rst pin to gpio_display_rst_n * FuriHal: add debug HAL * FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit * FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag * FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works * FuriHal: take insomnia while shutdown * Remove USB switch on/off on VBUS change * Better tick skew handling * Improve tick consistency under load * Add USB_HP dummy IRQ handler * Move interrupt check closer to sleep * Clean up includes * Re-enable Insomnia globally * FuriHal: enable CSS * FuriHal: remove questionable core2 clock shenanigans * FuriHal: use core1 RCC registers in idle timer config * FuriHal: return back CSS handlers, add lptim isr dispatching Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com> Co-authored-by: nminaylov <nm29719@gmail.com>
553 lines
12 KiB
C
553 lines
12 KiB
C
#include "applications.h"
|
|
#include <assets_icons.h>
|
|
|
|
// Services
|
|
extern int32_t rpc_srv(void* p);
|
|
extern int32_t bt_srv(void* p);
|
|
extern int32_t cli_srv(void* p);
|
|
extern int32_t dialogs_srv(void* p);
|
|
extern int32_t dolphin_srv(void* p);
|
|
extern int32_t gui_srv(void* p);
|
|
extern int32_t input_srv(void* p);
|
|
extern int32_t loader_srv(void* p);
|
|
extern int32_t notification_srv(void* p);
|
|
extern int32_t power_srv(void* p);
|
|
extern int32_t storage_srv(void* p);
|
|
extern int32_t desktop_srv(void* p);
|
|
extern int32_t updater_srv(void* p);
|
|
|
|
// Apps
|
|
extern int32_t accessor_app(void* p);
|
|
extern int32_t archive_app(void* p);
|
|
extern int32_t bad_usb_app(void* p);
|
|
extern int32_t u2f_app(void* p);
|
|
extern int32_t uart_echo_app(void* p);
|
|
extern int32_t blink_test_app(void* p);
|
|
extern int32_t bt_debug_app(void* p);
|
|
extern int32_t delay_test_app(void* p);
|
|
extern int32_t display_test_app(void* p);
|
|
extern int32_t gpio_app(void* p);
|
|
extern int32_t ibutton_app(void* p);
|
|
extern int32_t infrared_app(void* p);
|
|
extern int32_t infrared_monitor_app(void* p);
|
|
extern int32_t keypad_test_app(void* p);
|
|
extern int32_t lfrfid_app(void* p);
|
|
extern int32_t lfrfid_debug_app(void* p);
|
|
extern int32_t nfc_app(void* p);
|
|
extern int32_t passport_app(void* p);
|
|
extern int32_t scened_app(void* p);
|
|
extern int32_t storage_test_app(void* p);
|
|
extern int32_t subghz_app(void* p);
|
|
extern int32_t usb_mouse_app(void* p);
|
|
extern int32_t usb_test_app(void* p);
|
|
extern int32_t vibro_test_app(void* p);
|
|
extern int32_t bt_hid_app(void* p);
|
|
extern int32_t battery_test_app(void* p);
|
|
extern int32_t text_box_test_app(void* p);
|
|
|
|
// Plugins
|
|
extern int32_t music_player_app(void* p);
|
|
extern int32_t snake_game_app(void* p);
|
|
|
|
// On system start hooks declaration
|
|
extern void bt_on_system_start();
|
|
extern void crypto_on_system_start();
|
|
extern void ibutton_on_system_start();
|
|
extern void infrared_on_system_start();
|
|
extern void lfrfid_on_system_start();
|
|
extern void nfc_on_system_start();
|
|
extern void storage_on_system_start();
|
|
extern void subghz_on_system_start();
|
|
extern void power_on_system_start();
|
|
extern void unit_tests_on_system_start();
|
|
extern void updater_on_system_start();
|
|
|
|
// Settings
|
|
extern int32_t notification_settings_app(void* p);
|
|
extern int32_t storage_settings_app(void* p);
|
|
extern int32_t bt_settings_app(void* p);
|
|
extern int32_t desktop_settings_app(void* p);
|
|
extern int32_t about_settings_app(void* p);
|
|
extern int32_t power_settings_app(void* p);
|
|
extern int32_t system_settings_app(void* p);
|
|
|
|
const FlipperApplication FLIPPER_SERVICES[] = {
|
|
/* Services */
|
|
#ifdef SRV_RPC
|
|
{.app = rpc_srv,
|
|
.name = "RpcSrv",
|
|
.stack_size = 1024 * 4,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef SRV_BT
|
|
{.app = bt_srv,
|
|
.name = "BtSrv",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef SRV_CLI
|
|
{.app = cli_srv,
|
|
.name = "CliSrv",
|
|
.stack_size = 4096,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef SRV_DIALOGS
|
|
{.app = dialogs_srv,
|
|
.name = "DialogsSrv",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef SRV_DOLPHIN
|
|
{.app = dolphin_srv,
|
|
.name = "DolphinSrv",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef SRV_DESKTOP
|
|
#ifdef SRV_UPDATER
|
|
#error SRV_UPDATER and SRV_DESKTOP are mutually exclusive!
|
|
#endif
|
|
{.app = desktop_srv,
|
|
.name = "DesktopSrv",
|
|
.stack_size = 2048,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef SRV_GUI
|
|
{.app = gui_srv,
|
|
.name = "GuiSrv",
|
|
.stack_size = 2048,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef SRV_INPUT
|
|
{.app = input_srv,
|
|
.name = "InputSrv",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef SRV_LOADER
|
|
{.app = loader_srv,
|
|
.name = "LoaderSrv",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef SRV_NOTIFICATION
|
|
{.app = notification_srv,
|
|
.name = "NotificationSrv",
|
|
.stack_size = 1536,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef SRV_POWER
|
|
{.app = power_srv,
|
|
.name = "PowerSrv",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef SRV_STORAGE
|
|
{.app = storage_srv,
|
|
.name = "StorageSrv",
|
|
.stack_size = 3072,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef SRV_UPDATER
|
|
#ifdef SRV_DESKTOP
|
|
#error SRV_UPDATER and SRV_DESKTOP are mutually exclusive!
|
|
#endif
|
|
{.app = updater_srv,
|
|
.name = "UpdaterSrv",
|
|
.stack_size = 2048,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
};
|
|
|
|
const size_t FLIPPER_SERVICES_COUNT = COUNT_OF(FLIPPER_SERVICES);
|
|
|
|
const FlipperApplication FLIPPER_SYSTEM_APPS[] = {
|
|
#ifdef APP_UPDATER
|
|
#ifdef SRV_UPDATER
|
|
#error APP_UPDATER and SRV_UPDATER are mutually exclusive!
|
|
#endif
|
|
{.app = updater_srv,
|
|
.name = "UpdaterApp",
|
|
.stack_size = 2048,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
};
|
|
|
|
const size_t FLIPPER_SYSTEM_APPS_COUNT = COUNT_OF(FLIPPER_SYSTEM_APPS);
|
|
|
|
// Main menu APP
|
|
const FlipperApplication FLIPPER_APPS[] = {
|
|
|
|
#ifdef APP_SUBGHZ
|
|
{.app = subghz_app,
|
|
.name = "Sub-GHz",
|
|
.stack_size = 2048,
|
|
.icon = &A_Sub1ghz_14,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_LF_RFID
|
|
{.app = lfrfid_app,
|
|
.name = "125 kHz RFID",
|
|
.stack_size = 2048,
|
|
.icon = &A_125khz_14,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_NFC
|
|
{.app = nfc_app,
|
|
.name = "NFC",
|
|
.stack_size = 4096,
|
|
.icon = &A_NFC_14,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_INFRARED
|
|
{.app = infrared_app,
|
|
.name = "Infrared",
|
|
.stack_size = 1024 * 3,
|
|
.icon = &A_Infrared_14,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_GPIO
|
|
{.app = gpio_app,
|
|
.name = "GPIO",
|
|
.stack_size = 1024,
|
|
.icon = &A_GPIO_14,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_IBUTTON
|
|
{.app = ibutton_app,
|
|
.name = "iButton",
|
|
.stack_size = 2048,
|
|
.icon = &A_iButton_14,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_BAD_USB
|
|
{.app = bad_usb_app,
|
|
.name = "Bad USB",
|
|
.stack_size = 2048,
|
|
.icon = &A_BadUsb_14,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_U2F
|
|
{.app = u2f_app,
|
|
.name = "U2F",
|
|
.stack_size = 2048,
|
|
.icon = &A_U2F_14,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
};
|
|
|
|
const size_t FLIPPER_APPS_COUNT = COUNT_OF(FLIPPER_APPS);
|
|
|
|
// On system start hooks
|
|
const FlipperOnStartHook FLIPPER_ON_SYSTEM_START[] = {
|
|
crypto_on_system_start,
|
|
|
|
#ifdef APP_INFRARED
|
|
infrared_on_system_start,
|
|
#endif
|
|
|
|
#ifdef APP_NFC
|
|
nfc_on_system_start,
|
|
#endif
|
|
|
|
#ifdef APP_SUBGHZ
|
|
subghz_on_system_start,
|
|
#endif
|
|
|
|
#ifdef APP_LF_RFID
|
|
lfrfid_on_system_start,
|
|
#endif
|
|
|
|
#ifdef APP_IBUTTON
|
|
ibutton_on_system_start,
|
|
#endif
|
|
|
|
#ifdef SRV_BT
|
|
bt_on_system_start,
|
|
#endif
|
|
|
|
#ifdef SRV_POWER
|
|
power_on_system_start,
|
|
#endif
|
|
|
|
#ifdef SRV_STORAGE
|
|
storage_on_system_start,
|
|
#endif
|
|
|
|
#ifdef APP_UNIT_TESTS
|
|
unit_tests_on_system_start,
|
|
#endif
|
|
|
|
#ifdef APP_UPDATER
|
|
updater_on_system_start,
|
|
#endif
|
|
};
|
|
|
|
const size_t FLIPPER_ON_SYSTEM_START_COUNT = COUNT_OF(FLIPPER_ON_SYSTEM_START);
|
|
|
|
// Plugin menu
|
|
const FlipperApplication FLIPPER_PLUGINS[] = {
|
|
#ifdef APP_BLE_HID
|
|
{.app = bt_hid_app,
|
|
.name = "Bluetooth Remote",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_MUSIC_PLAYER
|
|
{.app = music_player_app,
|
|
.name = "Music Player",
|
|
.stack_size = 1024,
|
|
.icon = &A_Plugins_14,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_SNAKE_GAME
|
|
{.app = snake_game_app,
|
|
.name = "Snake Game",
|
|
.stack_size = 1024,
|
|
.icon = &A_Plugins_14,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
};
|
|
|
|
const size_t FLIPPER_PLUGINS_COUNT = COUNT_OF(FLIPPER_PLUGINS);
|
|
|
|
// Plugin menu
|
|
const FlipperApplication FLIPPER_DEBUG_APPS[] = {
|
|
#ifdef APP_BLINK
|
|
{.app = blink_test_app,
|
|
.name = "Blink Test",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_VIBRO_TEST
|
|
{.app = vibro_test_app,
|
|
.name = "Vibro Test",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_KEYPAD_TEST
|
|
{.app = keypad_test_app,
|
|
.name = "Keypad Test",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_ACCESSOR
|
|
{.app = accessor_app,
|
|
.name = "Accessor",
|
|
.stack_size = 4096,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_USB_TEST
|
|
{.app = usb_test_app,
|
|
.name = "USB Test",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_USB_MOUSE
|
|
{.app = usb_mouse_app,
|
|
.name = "USB Mouse Demo",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_UART_ECHO
|
|
{.app = uart_echo_app,
|
|
.name = "Uart Echo",
|
|
.stack_size = 2048,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_INFRARED_MONITOR
|
|
{.app = infrared_monitor_app,
|
|
.name = "Infrared Monitor",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_SCENED
|
|
{.app = scened_app,
|
|
.name = "Templated Scene",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_LF_RFID
|
|
{.app = lfrfid_debug_app,
|
|
.name = "LF-RFID Debug",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef SRV_BT
|
|
{.app = bt_debug_app,
|
|
.name = "Bluetooth Debug",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_UNIT_TESTS
|
|
{.app = delay_test_app,
|
|
.name = "Delay Test",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_DISPLAY_TEST
|
|
{.app = display_test_app,
|
|
.name = "Display Test",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_BATTERY_TEST
|
|
{.app = battery_test_app,
|
|
.name = "Battery Test",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_TEXT_BOX_TEST
|
|
{.app = text_box_test_app,
|
|
.name = "Text Box Test",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
};
|
|
|
|
const size_t FLIPPER_DEBUG_APPS_COUNT = COUNT_OF(FLIPPER_DEBUG_APPS);
|
|
|
|
#ifdef APP_ARCHIVE
|
|
const FlipperApplication FLIPPER_ARCHIVE = {
|
|
.app = archive_app,
|
|
.name = "Archive",
|
|
.stack_size = 4096,
|
|
.icon = &A_FileManager_14,
|
|
.flags = FlipperApplicationFlagDefault};
|
|
#endif
|
|
|
|
// Settings menu
|
|
const FlipperApplication FLIPPER_SETTINGS_APPS[] = {
|
|
#ifdef SRV_BT
|
|
{.app = bt_settings_app,
|
|
.name = "Bluetooth",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef SRV_NOTIFICATION
|
|
{.app = notification_settings_app,
|
|
.name = "LCD and Notifications",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef SRV_STORAGE
|
|
{.app = storage_settings_app,
|
|
.name = "Storage",
|
|
.stack_size = 2048,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef SRV_POWER
|
|
{.app = power_settings_app,
|
|
.name = "Power",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagInsomniaSafe},
|
|
#endif
|
|
|
|
#ifdef SRV_DESKTOP
|
|
{.app = desktop_settings_app,
|
|
.name = "Desktop",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_PASSPORT
|
|
{.app = passport_app,
|
|
.name = "Passport",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef SRV_GUI
|
|
{.app = system_settings_app,
|
|
.name = "System",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
|
|
#ifdef APP_ABOUT
|
|
{.app = about_settings_app,
|
|
.name = "About",
|
|
.stack_size = 1024,
|
|
.icon = NULL,
|
|
.flags = FlipperApplicationFlagDefault},
|
|
#endif
|
|
};
|
|
|
|
const size_t FLIPPER_SETTINGS_APPS_COUNT = COUNT_OF(FLIPPER_SETTINGS_APPS);
|