flipperzero-firmware/lib/drivers/bq25896.h

65 lines
1.8 KiB
C

#pragma once
#include "bq25896_reg.h"
#include <stdbool.h>
#include <stdint.h>
#include <furi_hal_i2c.h>
/** Initialize Driver */
void bq25896_init(FuriHalI2cBusHandle* handle);
/** Send device into shipping mode */
void bq25896_poweroff(FuriHalI2cBusHandle* handle);
/** Get charging status */
ChrgStat bq25896_get_charge_status(FuriHalI2cBusHandle* handle);
/** Is currently charging */
bool bq25896_is_charging(FuriHalI2cBusHandle* handle);
/** Is charging completed while connected to charger */
bool bq25896_is_charging_done(FuriHalI2cBusHandle* handle);
/** Enable charging */
void bq25896_enable_charging(FuriHalI2cBusHandle* handle);
/** Disable charging */
void bq25896_disable_charging(FuriHalI2cBusHandle* handle);
/** Enable otg */
void bq25896_enable_otg(FuriHalI2cBusHandle* handle);
/** Disable otg */
void bq25896_disable_otg(FuriHalI2cBusHandle* handle);
/** Is otg enabled */
bool bq25896_is_otg_enabled(FuriHalI2cBusHandle* handle);
/** Get VREG (charging) voltage in mV */
uint16_t bq25896_get_vreg_voltage(FuriHalI2cBusHandle* handle);
/** Set VREG (charging) voltage in mV
*
* Valid range: 3840mV - 4208mV, in steps of 16mV
*/
void bq25896_set_vreg_voltage(FuriHalI2cBusHandle* handle, uint16_t vreg_voltage);
/** Check OTG BOOST Fault status */
bool bq25896_check_otg_fault(FuriHalI2cBusHandle* handle);
/** Get VBUS Voltage in mV */
uint16_t bq25896_get_vbus_voltage(FuriHalI2cBusHandle* handle);
/** Get VSYS Voltage in mV */
uint16_t bq25896_get_vsys_voltage(FuriHalI2cBusHandle* handle);
/** Get VBAT Voltage in mV */
uint16_t bq25896_get_vbat_voltage(FuriHalI2cBusHandle* handle);
/** Get VBAT current in mA */
uint16_t bq25896_get_vbat_current(FuriHalI2cBusHandle* handle);
/** Get NTC voltage in mpct of REGN */
uint32_t bq25896_get_ntc_mpct(FuriHalI2cBusHandle* handle);