flipperzero-firmware/firmware/targets/f6/furi-hal/furi-hal-resources.h
2021-08-08 21:03:25 +03:00

104 lines
2.4 KiB
C

#pragma once
#include "main.h"
#include <furi.h>
#include <stm32wbxx.h>
#include <stm32wbxx_ll_gpio.h>
#ifdef __cplusplus
extern "C" {
#endif
#define POWER_I2C_SCL_Pin LL_GPIO_PIN_9
#define POWER_I2C_SCL_GPIO_Port GPIOA
#define POWER_I2C_SDA_Pin LL_GPIO_PIN_10
#define POWER_I2C_SDA_GPIO_Port GPIOA
#define POWER_I2C I2C1
/** Timing register value is computed with the STM32CubeMX Tool,
* Standard Mode @100kHz with I2CCLK = 64 MHz,
* rise time = 0ns, fall time = 0ns
*/
#define POWER_I2C_TIMINGS_100 0x10707DBC
/** Timing register value is computed with the STM32CubeMX Tool,
* Fast Mode @400kHz with I2CCLK = 64 MHz,
* rise time = 0ns, fall time = 0ns
*/
#define POWER_I2C_TIMINGS_400 0x00602173
/* Input Related Constants */
#define INPUT_DEBOUNCE_TICKS 20
/* Input Keys */
typedef enum {
InputKeyUp,
InputKeyDown,
InputKeyRight,
InputKeyLeft,
InputKeyOk,
InputKeyBack,
} InputKey;
/* Light */
typedef enum {
LightRed,
LightGreen,
LightBlue,
LightBacklight,
} Light;
typedef struct {
const GPIO_TypeDef* port;
const uint16_t pin;
const InputKey key;
const bool inverted;
} InputPin;
extern const InputPin input_pins[];
extern const size_t input_pins_count;
extern const GpioPin vibro_gpio;
extern const GpioPin ibutton_gpio;
extern const GpioPin gpio_cc1101_g0;
extern const GpioPin gpio_rf_sw_0;
extern const GpioPin gpio_subghz_cs;
extern const GpioPin gpio_display_cs;
extern const GpioPin gpio_display_rst;
extern const GpioPin gpio_display_di;
extern const GpioPin gpio_sdcard_cs;
extern const GpioPin gpio_nfc_cs;
extern const GpioPin gpio_spi_d_miso;
extern const GpioPin gpio_spi_d_mosi;
extern const GpioPin gpio_spi_d_sck;
extern const GpioPin gpio_spi_r_miso;
extern const GpioPin gpio_spi_r_mosi;
extern const GpioPin gpio_spi_r_sck;
extern const GpioPin gpio_ext_pc0;
extern const GpioPin gpio_ext_pc1;
extern const GpioPin gpio_ext_pc3;
extern const GpioPin gpio_ext_pb2;
extern const GpioPin gpio_ext_pb3;
extern const GpioPin gpio_ext_pa4;
extern const GpioPin gpio_ext_pa6;
extern const GpioPin gpio_ext_pa7;
extern const GpioPin gpio_rfid_pull;
extern const GpioPin gpio_rfid_carrier_out;
extern const GpioPin gpio_rfid_data_in;
extern const GpioPin gpio_irda_rx;
extern const GpioPin gpio_irda_tx;
extern const GpioPin gpio_usart_tx;
extern const GpioPin gpio_usart_rx;
#ifdef __cplusplus
}
#endif