flipperzero-firmware/firmware/targets/furi_hal_include/furi_hal_nfc.h
Yukai Li 0d5d4c8688
RFC: NTAG I2C support (#1227)
* nfc: Add NTAG I2C (Plus) 1K/2K read support
* nfc: Add rudimentary NTAG I2C emulation
* nfc: Closer NTAG I2C emulation plus debug logging
* nfc: Fix NTAG I2C sector select emulation
* nfc: Add security for NTAG I2C
* nfc: Send NAK correctly for MFUL reads
* nfc: Better emulate NTAG I2C SECTOR_SELECT behavior
* nfc: Fix non-I2C Ultralight read
  Per datasheet, max sector for SECTOR_SELECT is 0xfe, so 0xff is OK
  as uninit value
* nfc: Only read sig for NTAG if supported
  Attempting to read signature breaks immediate call to sector select on
  NTAG I2C original for some reason, so don't read signature if the
  command is not supported

Co-authored-by: gornekich <n.gorbadey@gmail.com>
2022-05-26 15:55:29 +03:00

219 lines
5.6 KiB
C
Executable File

/**
* @file furi_hal_nfc.h
* NFC HAL API
*/
#pragma once
#include <rfal_nfc.h>
#include <st_errno.h>
#include <stdbool.h>
#include <stdint.h>
#include <lib/nfc_protocols/nfca.h>
#ifdef __cplusplus
extern "C" {
#endif
#define FURI_HAL_NFC_UID_MAX_LEN 10
#define FURI_HAL_NFC_DATA_BUFF_SIZE (256)
#define FURI_HAL_NFC_PARITY_BUFF_SIZE (FURI_HAL_NFC_DATA_BUFF_SIZE / 8)
#define FURI_HAL_NFC_TXRX_DEFAULT \
((uint32_t)RFAL_TXRX_FLAGS_CRC_TX_AUTO | (uint32_t)RFAL_TXRX_FLAGS_CRC_RX_REMV | \
(uint32_t)RFAL_TXRX_FLAGS_PAR_RX_REMV | (uint32_t)RFAL_TXRX_FLAGS_PAR_TX_AUTO)
#define FURI_HAL_NFC_TX_DEFAULT_RX_NO_CRC \
((uint32_t)RFAL_TXRX_FLAGS_CRC_TX_AUTO | (uint32_t)RFAL_TXRX_FLAGS_CRC_RX_KEEP | \
(uint32_t)RFAL_TXRX_FLAGS_PAR_RX_REMV | (uint32_t)RFAL_TXRX_FLAGS_PAR_TX_AUTO)
#define FURI_HAL_NFC_TXRX_WITH_PAR \
((uint32_t)RFAL_TXRX_FLAGS_CRC_TX_MANUAL | (uint32_t)RFAL_TXRX_FLAGS_CRC_RX_KEEP | \
(uint32_t)RFAL_TXRX_FLAGS_PAR_RX_KEEP | (uint32_t)RFAL_TXRX_FLAGS_PAR_TX_AUTO)
#define FURI_HAL_NFC_TXRX_RAW \
((uint32_t)RFAL_TXRX_FLAGS_CRC_TX_MANUAL | (uint32_t)RFAL_TXRX_FLAGS_CRC_RX_KEEP | \
(uint32_t)RFAL_TXRX_FLAGS_PAR_RX_KEEP | (uint32_t)RFAL_TXRX_FLAGS_PAR_TX_NONE)
#define FURI_HAL_NFC_TX_RAW_RX_DEFAULT \
((uint32_t)RFAL_TXRX_FLAGS_CRC_TX_MANUAL | (uint32_t)RFAL_TXRX_FLAGS_CRC_RX_REMV | \
(uint32_t)RFAL_TXRX_FLAGS_PAR_RX_REMV | (uint32_t)RFAL_TXRX_FLAGS_PAR_TX_NONE)
typedef enum {
FuriHalNfcTxRxTypeDefault,
FuriHalNfcTxRxTypeRxNoCrc,
FuriHalNfcTxRxTypeRxKeepPar,
FuriHalNfcTxRxTypeRaw,
FuriHalNfcTxRxTypeRxRaw,
FuriHalNfcTxRxTransparent,
} FuriHalNfcTxRxType;
typedef bool (*FuriHalNfcEmulateCallback)(
uint8_t* buff_rx,
uint16_t buff_rx_len,
uint8_t* buff_tx,
uint16_t* buff_tx_len,
uint32_t* flags,
void* context);
typedef enum {
FuriHalNfcTypeA,
FuriHalNfcTypeB,
FuriHalNfcTypeF,
FuriHalNfcTypeV,
} FuriHalNfcType;
typedef enum {
FuriHalNfcInterfaceRf,
FuriHalNfcInterfaceIsoDep,
FuriHalNfcInterfaceNfcDep,
} FuriHalNfcInterface;
typedef struct {
FuriHalNfcType type;
FuriHalNfcInterface interface;
uint8_t uid_len;
uint8_t uid[10];
uint32_t cuid;
uint8_t atqa[2];
uint8_t sak;
} FuriHalNfcDevData;
typedef struct {
uint8_t tx_data[FURI_HAL_NFC_DATA_BUFF_SIZE];
uint8_t tx_parity[FURI_HAL_NFC_PARITY_BUFF_SIZE];
uint16_t tx_bits;
uint8_t rx_data[FURI_HAL_NFC_DATA_BUFF_SIZE];
uint8_t rx_parity[FURI_HAL_NFC_PARITY_BUFF_SIZE];
uint16_t rx_bits;
FuriHalNfcTxRxType tx_rx_type;
NfcaSignal* nfca_signal;
} FuriHalNfcTxRxContext;
/** Init nfc
*/
void furi_hal_nfc_init();
/** Check if nfc worker is busy
*
* @return true if busy
*/
bool furi_hal_nfc_is_busy();
/** NFC field on
*/
void furi_hal_nfc_field_on();
/** NFC field off
*/
void furi_hal_nfc_field_off();
/** NFC start sleep
*/
void furi_hal_nfc_start_sleep();
/** NFC stop sleep
*/
void furi_hal_nfc_exit_sleep();
/** NFC poll
*
* @param dev_list pointer to rfalNfcDevice buffer
* @param dev_cnt pointer device count
* @param timeout timeout in ms
* @param deactivate deactivate flag
*
* @return true on success
*/
bool furi_hal_nfc_detect(FuriHalNfcDevData* nfc_data, uint32_t timeout);
/** Activate NFC-A tag
*
* @param timeout timeout in ms
* @param cuid pointer to 32bit uid
*
* @return true on succeess
*/
bool furi_hal_nfc_activate_nfca(uint32_t timeout, uint32_t* cuid);
/** NFC listen
*
* @param uid pointer to uid buffer
* @param uid_len uid length
* @param atqa pointer to atqa
* @param sak sak
* @param activate_after_sak activate after sak flag
* @param timeout timeout in ms
*
* @return true on success
*/
bool furi_hal_nfc_listen(
uint8_t* uid,
uint8_t uid_len,
uint8_t* atqa,
uint8_t sak,
bool activate_after_sak,
uint32_t timeout);
bool furi_hal_nfc_emulate_nfca(
uint8_t* uid,
uint8_t uid_len,
uint8_t* atqa,
uint8_t sak,
FuriHalNfcEmulateCallback callback,
void* context,
uint32_t timeout);
/** NFC data exchange
*
* @param tx_buff transmit buffer
* @param tx_len transmit buffer length
* @param rx_buff receive buffer
* @param rx_len receive buffer length
* @param deactivate deactivate flag
*
* @return ST ReturnCode
*/
ReturnCode furi_hal_nfc_data_exchange(
uint8_t* tx_buff,
uint16_t tx_len,
uint8_t** rx_buff,
uint16_t** rx_len,
bool deactivate);
/** NFC data exchange
*
* @param tx_rx_ctx FuriHalNfcTxRxContext instance
*
* @return true on success
*/
bool furi_hal_nfc_tx_rx(FuriHalNfcTxRxContext* tx_rx, uint16_t timeout_ms);
/** NFC data full exhange
*
* @param tx_buff transmit buffer
* @param tx_len transmit buffer length
* @param rx_buff receive buffer
* @param rx_cap receive buffer capacity
* @param rx_len receive buffer length
*
* @return ST ReturnCode
*/
ReturnCode furi_hal_nfc_exchange_full(
uint8_t* tx_buff,
uint16_t tx_len,
uint8_t* rx_buff,
uint16_t rx_cap,
uint16_t* rx_len);
/** NFC deactivate and start sleep
*/
void furi_hal_nfc_sleep();
void furi_hal_nfc_stop();
#ifdef __cplusplus
}
#endif