flipperzero-firmware/firmware/targets/f7/furi_hal/furi_hal_spi.c
Georgii Surkov 01434265f6
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168)
* Disable USART in sleep
* Restore UART state on suspend/resume
* FuriHal: Enable stop mode and add insomnia to I2C and SPI
* Remove IDLE interrupt
* FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep
* FuriHal: tie stop mode debug with debug rtc flag
* FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag
* FuriHal: move resource init to early stage
* Add EXTI pending check, enable debug traps with compile-time flag
* Wrap sleep debug functions in conditional compilation
* Remove erroneous changed
* Do not use CSS, remove it from everywhere
* Enable/disable USB on VBUS connect (prototype)
* FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores
* FuriHal: honor c1 LMPS
* USB mode switch fix
* Applications: add flags and insomnia bypass system
* Correct spelling
* FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api
* FuriHal: extra check on reinit request
* FuriHal: rename gpio_display_rst pin to gpio_display_rst_n
* FuriHal: add debug HAL
* FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit
* FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag
* FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works
* FuriHal: take insomnia while shutdown
* Remove USB switch on/off on VBUS change
* Better tick skew handling
* Improve tick consistency under load
* Add USB_HP dummy IRQ handler
* Move interrupt check closer to sleep
* Clean up includes
* Re-enable Insomnia globally
* FuriHal: enable CSS
* FuriHal: remove questionable core2 clock shenanigans
* FuriHal: use core1 RCC registers in idle timer config
* FuriHal: return back CSS handlers, add lptim isr dispatching

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 16:29:51 +03:00

169 lines
4.5 KiB
C

#include "furi_hal_spi.h"
#include "furi_hal_resources.h"
#include <furi_hal_power.h>
#include <stdbool.h>
#include <string.h>
#include <furi.h>
#include <stm32wbxx_ll_spi.h>
#include <stm32wbxx_ll_utils.h>
#include <stm32wbxx_ll_cortex.h>
#define TAG "FuriHalSpi"
void furi_hal_spi_init_early() {
furi_hal_spi_bus_init(&furi_hal_spi_bus_d);
furi_hal_spi_bus_handle_init(&furi_hal_spi_bus_handle_display);
}
void furi_hal_spi_deinit_early() {
furi_hal_spi_bus_handle_deinit(&furi_hal_spi_bus_handle_display);
furi_hal_spi_bus_deinit(&furi_hal_spi_bus_d);
}
void furi_hal_spi_init() {
furi_hal_spi_bus_init(&furi_hal_spi_bus_r);
furi_hal_spi_bus_handle_init(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_bus_handle_init(&furi_hal_spi_bus_handle_nfc);
furi_hal_spi_bus_handle_init(&furi_hal_spi_bus_handle_sd_fast);
furi_hal_spi_bus_handle_init(&furi_hal_spi_bus_handle_sd_slow);
FURI_LOG_I(TAG, "Init OK");
}
void furi_hal_spi_bus_init(FuriHalSpiBus* bus) {
furi_assert(bus);
bus->callback(bus, FuriHalSpiBusEventInit);
}
void furi_hal_spi_bus_deinit(FuriHalSpiBus* bus) {
furi_assert(bus);
bus->callback(bus, FuriHalSpiBusEventDeinit);
}
void furi_hal_spi_bus_handle_init(FuriHalSpiBusHandle* handle) {
furi_assert(handle);
handle->callback(handle, FuriHalSpiBusHandleEventInit);
}
void furi_hal_spi_bus_handle_deinit(FuriHalSpiBusHandle* handle) {
furi_assert(handle);
handle->callback(handle, FuriHalSpiBusHandleEventDeinit);
}
void furi_hal_spi_acquire(FuriHalSpiBusHandle* handle) {
furi_assert(handle);
furi_hal_power_insomnia_enter();
handle->bus->callback(handle->bus, FuriHalSpiBusEventLock);
handle->bus->callback(handle->bus, FuriHalSpiBusEventActivate);
furi_assert(handle->bus->current_handle == NULL);
handle->bus->current_handle = handle;
handle->callback(handle, FuriHalSpiBusHandleEventActivate);
}
void furi_hal_spi_release(FuriHalSpiBusHandle* handle) {
furi_assert(handle);
furi_assert(handle->bus->current_handle == handle);
// Handle event and unset handle
handle->callback(handle, FuriHalSpiBusHandleEventDeactivate);
handle->bus->current_handle = NULL;
// Bus events
handle->bus->callback(handle->bus, FuriHalSpiBusEventDeactivate);
handle->bus->callback(handle->bus, FuriHalSpiBusEventUnlock);
furi_hal_power_insomnia_exit();
}
static void furi_hal_spi_bus_end_txrx(FuriHalSpiBusHandle* handle, uint32_t timeout) {
while(LL_SPI_GetTxFIFOLevel(handle->bus->spi) != LL_SPI_TX_FIFO_EMPTY)
;
while(LL_SPI_IsActiveFlag_BSY(handle->bus->spi))
;
while(LL_SPI_GetRxFIFOLevel(handle->bus->spi) != LL_SPI_RX_FIFO_EMPTY) {
LL_SPI_ReceiveData8(handle->bus->spi);
}
}
bool furi_hal_spi_bus_rx(
FuriHalSpiBusHandle* handle,
uint8_t* buffer,
size_t size,
uint32_t timeout) {
furi_assert(handle);
furi_assert(handle->bus->current_handle == handle);
furi_assert(buffer);
furi_assert(size > 0);
return furi_hal_spi_bus_trx(handle, buffer, buffer, size, timeout);
}
bool furi_hal_spi_bus_tx(
FuriHalSpiBusHandle* handle,
uint8_t* buffer,
size_t size,
uint32_t timeout) {
furi_assert(handle);
furi_assert(handle->bus->current_handle == handle);
furi_assert(buffer);
furi_assert(size > 0);
bool ret = true;
while(size > 0) {
if(LL_SPI_IsActiveFlag_TXE(handle->bus->spi)) {
LL_SPI_TransmitData8(handle->bus->spi, *buffer);
buffer++;
size--;
}
}
furi_hal_spi_bus_end_txrx(handle, timeout);
LL_SPI_ClearFlag_OVR(handle->bus->spi);
return ret;
}
bool furi_hal_spi_bus_trx(
FuriHalSpiBusHandle* handle,
uint8_t* tx_buffer,
uint8_t* rx_buffer,
size_t size,
uint32_t timeout) {
furi_assert(handle);
furi_assert(handle->bus->current_handle == handle);
furi_assert(tx_buffer);
furi_assert(rx_buffer);
furi_assert(size > 0);
bool ret = true;
size_t tx_size = size;
bool tx_allowed = true;
while(size > 0) {
if(tx_size > 0 && LL_SPI_IsActiveFlag_TXE(handle->bus->spi) && tx_allowed) {
LL_SPI_TransmitData8(handle->bus->spi, *tx_buffer);
tx_buffer++;
tx_size--;
tx_allowed = false;
}
if(LL_SPI_IsActiveFlag_RXNE(handle->bus->spi)) {
*rx_buffer = LL_SPI_ReceiveData8(handle->bus->spi);
rx_buffer++;
size--;
tx_allowed = true;
}
}
furi_hal_spi_bus_end_txrx(handle, timeout);
return ret;
}