History

Nikolay Minaylov 2f3ea9494e HAL to LL migration: GPIO, HSEM, AES (#1069 ) * gpio, hsem, crypto: switch from HAL to LL/registers * Moved GPIO initialization to furi_hal * More HAL removed * All HAL modules disabled * HAL is finally removed * hal_gpio -> furi_hal_gpio, main.h removed * Bootloader build fix * RTOS config moved to freertos-glue * delay -> furi_hal_delay Co-authored-by: あく <alleteam@gmail.com>		2022-03-30 18:23:40 +03:00
..
src	Implement bootloader #137 (#142 )	2020-10-01 02:05:04 +03:00
targets	HAL to LL migration: GPIO, HSEM, AES (#1069 )	2022-03-30 18:23:40 +03:00
Makefile	[FL-2230] SubGhz: protocol API refactoring (#969 )	2022-03-03 12:48:56 +03:00
ReadMe.md	Fix typos (#857 )	2021-12-01 02:53:53 +03:00

ReadMe.md

Flipper bootloader

What it does?

Hardware initialization
Boot process LED indicators
Firmware update
Errata crutches
Recovery mode

Targets

| Name | Bootloader | Firmware | Reset | DFU | | | Address | Address | Combo | Combo |

| f7 | 0x08000000 | 0x00008000 | L+Back | L+Back, hold L |

Also there is a ST bootloader combo available on empty device: L+Ok+Back, release Back,Left. Target independent code and headers in src and target/include folders.

Building

With dev docker image:

docker-compose exec dev make -C bootloader

With toolchain installed in path:

make -C bootloader

Build Options

DEBUG - 0/1 - enable or disable debug build. Default is 1.
TARGET - string - target to build. Default is f4.

Flashing

Using SWD (STLink):

make -C bootloader flash

Or use DFU (USB):

make -C bootloader upload

Debug

Using SWD (STLink):

make -C bootloader debug