8073992925
* RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com> |
||
|---|---|---|
| .. | ||
| src | ||
| targets | ||
| Makefile | ||
| ReadMe.md | ||
Flipper bootloader
What it does?
- Hardware initialization
- Boot process LED indicators
- Firmware update
- Firmware CRC check
- Interactive UI
- FS check
- Recovery mode
- Errata crutches
Targets
| Name | Bootloader | Firmware | Reset | DFU | | | Address | Address | Combo | Combo |
| f4 | 0x08000000 | 0x00008000 | L+Back | L+Back, hold L |
Also there is a ST bootloader combo available on empty device: L+Ok+Back, release Back,Left.
Target independend code and headers in srcand target/include folders.
Building
With dev docker image:
docker-compose exec dev make -C bootloader
With toolchain installed in path:
make -C bootloader
Build Options
DEBUG- 0/1 - enable or disable debug build. Default is 1.TARGET- string - target to build. Default isf4.
Flashing
Using stlink(st-flash):
make -C bootloader flash
Or use ST bootloader:
make -C bootloader upload
Debug
Using stlink (st-util + gdb):
make -C bootloader debug