5c81bb8abc
* add u8g2 and ui libs * add display driver and usage example * not init display in test mode * change todo text * fix removed code * Target f2 (#107) * add ioc for flipperzero f2 * add generated f1 files to f2 * regenerate cubemx * invert initial state of led * blink backligh * shutdown backlight on idle
107 lines
2.9 KiB
C
107 lines
2.9 KiB
C
#include "u8g2_support.h"
|
|
#include "main.h"
|
|
#include "cmsis_os.h"
|
|
#include "gpio.h"
|
|
|
|
#include <stdio.h>
|
|
|
|
extern SPI_HandleTypeDef hspi1;
|
|
|
|
// #define DEBUG 1
|
|
|
|
uint8_t u8g2_gpio_and_delay_stm32(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr) {
|
|
switch(msg){
|
|
//Initialize SPI peripheral
|
|
case U8X8_MSG_GPIO_AND_DELAY_INIT:
|
|
/* HAL initialization contains all what we need so we can skip this part. */
|
|
break;
|
|
|
|
//Function which implements a delay, arg_int contains the amount of ms
|
|
case U8X8_MSG_DELAY_MILLI:
|
|
osDelay(arg_int);
|
|
break;
|
|
|
|
//Function which delays 10us
|
|
case U8X8_MSG_DELAY_10MICRO:
|
|
delay_us(10);
|
|
break;
|
|
|
|
//Function which delays 100ns
|
|
case U8X8_MSG_DELAY_100NANO:
|
|
asm("nop");
|
|
break;
|
|
|
|
//Function to define the logic level of the RESET line
|
|
case U8X8_MSG_GPIO_RESET:
|
|
#ifdef DEBUG
|
|
printf("[u8g2] rst %d\n", arg_int);
|
|
#endif
|
|
|
|
HAL_GPIO_WritePin(DISPLAY_RST_GPIO_Port, DISPLAY_RST_Pin, arg_int ? GPIO_PIN_SET : GPIO_PIN_RESET);
|
|
break;
|
|
|
|
default:
|
|
#ifdef DEBUG
|
|
printf("[u8g2] unknown io %d\n", msg);
|
|
#endif
|
|
|
|
return 0; //A message was received which is not implemented, return 0 to indicate an error
|
|
}
|
|
|
|
return 1; // command processed successfully.
|
|
}
|
|
|
|
uint8_t u8x8_hw_spi_stm32(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr){
|
|
switch (msg) {
|
|
case U8X8_MSG_BYTE_SEND:
|
|
#ifdef DEBUG
|
|
printf("[u8g2] send %d bytes %02X\n", arg_int, ((uint8_t*)arg_ptr)[0]);
|
|
#endif
|
|
|
|
HAL_SPI_Transmit(&hspi1, (uint8_t *)arg_ptr, arg_int, 10000);
|
|
break;
|
|
|
|
case U8X8_MSG_BYTE_SET_DC:
|
|
#ifdef DEBUG
|
|
printf("[u8g2] dc %d\n", arg_int);
|
|
#endif
|
|
|
|
HAL_GPIO_WritePin(DISPLAY_DI_GPIO_Port, DISPLAY_DI_Pin, arg_int ? GPIO_PIN_SET : GPIO_PIN_RESET);
|
|
break;
|
|
|
|
case U8X8_MSG_BYTE_INIT:
|
|
#ifdef DEBUG
|
|
printf("[u8g2] init\n");
|
|
#endif
|
|
HAL_GPIO_WritePin(DISPLAY_CS_GPIO_Port, DISPLAY_CS_Pin, GPIO_PIN_RESET);
|
|
break;
|
|
|
|
case U8X8_MSG_BYTE_START_TRANSFER:
|
|
#ifdef DEBUG
|
|
printf("[u8g2] start\n");
|
|
#endif
|
|
|
|
HAL_GPIO_WritePin(DISPLAY_CS_GPIO_Port, DISPLAY_CS_Pin, GPIO_PIN_RESET);
|
|
asm("nop");
|
|
break;
|
|
|
|
case U8X8_MSG_BYTE_END_TRANSFER:
|
|
#ifdef DEBUG
|
|
printf("[u8g2] end\n");
|
|
#endif
|
|
|
|
asm("nop");
|
|
HAL_GPIO_WritePin(DISPLAY_CS_GPIO_Port, DISPLAY_CS_Pin, GPIO_PIN_SET);
|
|
break;
|
|
|
|
default:
|
|
#ifdef DEBUG
|
|
printf("[u8g2] unknown xfer %d\n", msg);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|