liz/flipperzero-firmware
liz/flipperzero-firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
27ae2a8fa9
flipperzero-firmware/lib/ST25RFAL002/include/rfal_rf.h
Aleksandr Kutuzov 4c9eb4928d NFC: application + rfal + driver.
2020-10-20 14:12:28 +03:00

1573 lines
74 KiB
C
Executable File
Raw Blame History

/******************************************************************************
* \attention
*
* <h2><center>&copy; COPYRIGHT 2020 STMicroelectronics</center></h2>
*
* Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* www.st.com/myliberty
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
* AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/*
* PROJECT: ST25R391x firmware
* Revision:
* LANGUAGE: ISO C99
*/
/*! \file rfal_rf.h
*
* \author Gustavo Patricio
*
* \brief RF Abstraction Layer (RFAL)
*
* RFAL (RF Abstraction Layer) provides several functionalities required to
* perform RF/NFC communications. <br>The RFAL encapsulates the different
* RF ICs (ST25R3911, ST25R391x, etc) into a common and easy to use interface.
*
* It provides interfaces to configure the RF IC, set/get timings, modes, bit rates,
* specific handlings, execute listen mode, etc.
*
* Furthermore it provides a common interface to perform a Transceive operations.
* The Transceive can be executed in a blocking or non blocking way.<br>
* Additionally few specific Transceive methods are available to cope with the
* specifics of these particular operations.
*
* The most common interfaces are:
* <br>&nbsp; rfalInitialize()
* <br>&nbsp; rfalSetFDTPoll()
* <br>&nbsp; rfalSetFDTListen()
* <br>&nbsp; rfalSetGT()
* <br>&nbsp; rfalSetBitRate()
* <br>&nbsp; rfalSetMode()
* <br>&nbsp; rfalFieldOnAndStartGT()
* <br>&nbsp; rfalFieldOff()
* <br>&nbsp; rfalStartTransceive()
* <br>&nbsp; rfalGetTransceiveStatus()
* <br>&nbsp; rfalTransceiveBlockingTxRx()
*
* An usage example is provided here: \ref exampleRfalPoller.c
* \example exampleRfalPoller.c
*
* \addtogroup RFAL
* @{
*
* \addtogroup RFAL-HAL
* \brief RFAL Hardware Abstraction Layer
* @{
*
* \addtogroup RF
* \brief RFAL RF Abstraction Layer
* @{
*
*/
#ifndef RFAL_RF_H
#define RFAL_RF_H
/*
******************************************************************************
* INCLUDES
******************************************************************************
*/
#include "platform.h"
#include "st_errno.h"
#include "rfal_features.h"
/*
******************************************************************************
* GLOBAL DEFINES
******************************************************************************
*/
#define RFAL_VERSION 0x020200U /*!< RFAL Current Version: v2.2.0 */
#define RFAL_FWT_NONE 0xFFFFFFFFU /*!< Disabled FWT: Wait forever for a response */
#define RFAL_GT_NONE RFAL_TIMING_NONE /*!< Disabled GT: No GT will be applied after Field On */
#define RFAL_TIMING_NONE 0x00U /*!< Timing disabled | Don't apply */
#define RFAL_1FC_IN_4096FC (uint32_t)4096U /*!< Number of 1/fc cycles in one 4096/fc */
#define RFAL_1FC_IN_512FC (uint32_t)512U /*!< Number of 1/fc cycles in one 512/fc */
#define RFAL_1FC_IN_64FC (uint32_t)64U /*!< Number of 1/fc cycles in one 64/fc */
#define RFAL_1FC_IN_8FC (uint32_t)8U /*!< Number of 1/fc cycles in one 8/fc */
#define RFAL_US_IN_MS (uint32_t)1000U /*!< Number of us in one ms */
#define RFAL_1MS_IN_1FC (uint32_t)13560U /*!< Number of 1/fc cycles in 1ms */
#define RFAL_BITS_IN_BYTE (uint16_t)8U /*!< Number of bits in one byte */
#define RFAL_CRC_LEN 2U /*!< RF CRC LEN */
/*! Default TxRx flags: Tx CRC automatic, Rx CRC removed, NFCIP1 mode off, AGC On, Tx Parity automatic, Rx Parity removed */
#define RFAL_TXRX_FLAGS_DEFAULT ( (uint32_t)RFAL_TXRX_FLAGS_CRC_TX_AUTO | (uint32_t)RFAL_TXRX_FLAGS_CRC_RX_REMV | (uint32_t)RFAL_TXRX_FLAGS_NFCIP1_OFF | (uint32_t)RFAL_TXRX_FLAGS_AGC_ON | (uint32_t)RFAL_TXRX_FLAGS_PAR_RX_REMV | (uint32_t)RFAL_TXRX_FLAGS_PAR_TX_AUTO | (uint32_t)RFAL_TXRX_FLAGS_NFCV_FLAG_AUTO)
#define RFAL_LM_MASK_NFCA ((uint32_t)1U<<(uint8_t)RFAL_MODE_LISTEN_NFCA) /*!< Bitmask for Listen Mode enabling NFCA */
#define RFAL_LM_MASK_NFCB ((uint32_t)1U<<(uint8_t)RFAL_MODE_LISTEN_NFCB) /*!< Bitmask for Listen Mode enabling NFCB */
#define RFAL_LM_MASK_NFCF ((uint32_t)1U<<(uint8_t)RFAL_MODE_LISTEN_NFCF) /*!< Bitmask for Listen Mode enabling NFCF */
#define RFAL_LM_MASK_ACTIVE_P2P ((uint32_t)1U<<(uint8_t)RFAL_MODE_LISTEN_ACTIVE_P2P) /*!< Bitmask for Listen Mode enabling AP2P */
#define RFAL_LM_SENS_RES_LEN 2U /*!< NFC-A SENS_RES (ATQA) length */
#define RFAL_LM_SENSB_RES_LEN 13U /*!< NFC-B SENSB_RES (ATQB) length */
#define RFAL_LM_SENSF_RES_LEN 19U /*!< NFC-F SENSF_RES length */
#define RFAL_LM_SENSF_SC_LEN 2U /*!< NFC-F System Code length */
#define RFAL_NFCID3_LEN 10U /*!< NFCID3 length */
#define RFAL_NFCID2_LEN 8U /*!< NFCID2 length */
#define RFAL_NFCID1_TRIPLE_LEN 10U /*!< NFCID1 length */
#define RFAL_NFCID1_DOUBLE_LEN 7U /*!< NFCID1 length */
#define RFAL_NFCID1_SINGLE_LEN 4U /*!< NFCID1 length */
/*
******************************************************************************
* GLOBAL MACROS
******************************************************************************
*/
/*! Returns the maximum supported bit rate for RW mode. Caller must check if mode is supported before, as even if mode is not supported will return the min */
#define rfalGetMaxBrRW() ( ((RFAL_SUPPORT_BR_RW_6780) ? RFAL_BR_6780 : ((RFAL_SUPPORT_BR_RW_3390) ? RFAL_BR_3390 : ((RFAL_SUPPORT_BR_RW_1695) ? RFAL_BR_1695 : ((RFAL_SUPPORT_BR_RW_848) ? RFAL_BR_848 : ((RFAL_SUPPORT_BR_RW_424) ? RFAL_BR_424 : ((RFAL_SUPPORT_BR_RW_212) ? RFAL_BR_212 : RFAL_BR_106 ) ) ) ) ) ) )
/*! Returns the maximum supported bit rate for AP2P mode. Caller must check if mode is supported before, as even if mode is not supported will return the min */
#define rfalGetMaxBrAP2P() ( ((RFAL_SUPPORT_BR_AP2P_848) ? RFAL_BR_848 : ((RFAL_SUPPORT_BR_AP2P_424) ? RFAL_BR_424 : ((RFAL_SUPPORT_BR_AP2P_212) ? RFAL_BR_212 : RFAL_BR_106 ) ) ) )
/*! Returns the maximum supported bit rate for CE-A mode. Caller must check if mode is supported before, as even if mode is not supported will return the min */
#define rfalGetMaxBrCEA() ( ((RFAL_SUPPORT_BR_CE_A_848) ? RFAL_BR_848 : ((RFAL_SUPPORT_BR_CE_A_424) ? RFAL_BR_424 : ((RFAL_SUPPORT_BR_CE_A_212) ? RFAL_BR_212 : RFAL_BR_106 ) ) ) )
/*! Returns the maximum supported bit rate for CE-B mode. Caller must check if mode is supported before, as even if mode is not supported will return the min */
#define rfalGetMaxBrCEB() ( ((RFAL_SUPPORT_BR_CE_B_848) ? RFAL_BR_848 : ((RFAL_SUPPORT_BR_CE_B_424) ? RFAL_BR_424 : ((RFAL_SUPPORT_BR_CE_B_212) ? RFAL_BR_212 : RFAL_BR_106 ) ) ) )
/*! Returns the maximum supported bit rate for CE-F mode. Caller must check if mode is supported before, as even if mode is not supported will return the min */
#define rfalGetMaxBrCEF() ( ((RFAL_SUPPORT_BR_CE_F_424) ? RFAL_BR_424 : RFAL_BR_212 ) )
#define rfalIsModeActiveComm( md ) ( ((md) == RFAL_MODE_POLL_ACTIVE_P2P) || ((md) == RFAL_MODE_LISTEN_ACTIVE_P2P) ) /*!< Checks if mode md is Active Communication */
#define rfalIsModePassiveComm( md ) ( !rfalIsModeActiveComm(md) ) /*!< Checks if mode md is Passive Communication */
#define rfalIsModePassiveListen( md ) ( ((md) == RFAL_MODE_LISTEN_NFCA) || ((md) == RFAL_MODE_LISTEN_NFCB) || ((md) == RFAL_MODE_LISTEN_NFCF) ) /*!< Checks if mode md is Passive Listen */
#define rfalIsModePassivePoll( md ) ( rfalIsModePassiveComm(md) && !rfalIsModePassiveListen(md) ) /*!< Checks if mode md is Passive Poll */
#define rfalConv1fcTo8fc( t ) (uint32_t)( (uint32_t)(t) / RFAL_1FC_IN_8FC ) /*!< Converts the given t from 1/fc to 8/fc */
#define rfalConv8fcTo1fc( t ) (uint32_t)( (uint32_t)(t) * RFAL_1FC_IN_8FC ) /*!< Converts the given t from 8/fc to 1/fc */
#define rfalConv1fcTo64fc( t ) (uint32_t)( (uint32_t)(t) / RFAL_1FC_IN_64FC ) /*!< Converts the given t from 1/fc to 64/fc */
#define rfalConv64fcTo1fc( t ) (uint32_t)( (uint32_t)(t) * RFAL_1FC_IN_64FC ) /*!< Converts the given t from 64/fc to 1/fc */
#define rfalConv1fcTo512fc( t ) (uint32_t)( (uint32_t)(t) / RFAL_1FC_IN_512FC ) /*!< Converts the given t from 1/fc to 512/fc */
#define rfalConv512fcTo1fc( t ) (uint32_t)( (uint32_t)(t) * RFAL_1FC_IN_512FC ) /*!< Converts the given t from 512/fc to 1/fc */
#define rfalConv1fcTo4096fc( t ) (uint32_t)( (uint32_t)(t) / RFAL_1FC_IN_4096FC ) /*!< Converts the given t from 1/fc to 4096/fc */
#define rfalConv4096fcTo1fc( t ) (uint32_t)( (uint32_t)(t) * RFAL_1FC_IN_4096FC ) /*!< Converts the given t from 4096/fc to 1/fc */
#define rfalConv1fcToMs( t ) (uint32_t)( (uint32_t)(t) / RFAL_1MS_IN_1FC ) /*!< Converts the given t from 1/fc to ms */
#define rfalConvMsTo1fc( t ) (uint32_t)( (uint32_t)(t) * RFAL_1MS_IN_1FC ) /*!< Converts the given t from ms to 1/fc */
#define rfalConv1fcToUs( t ) (uint32_t)( ((uint32_t)(t) * RFAL_US_IN_MS) / RFAL_1MS_IN_1FC) /*!< Converts the given t from 1/fc to us */
#define rfalConvUsTo1fc( t ) (uint32_t)( ((uint32_t)(t) * RFAL_1MS_IN_1FC) / RFAL_US_IN_MS) /*!< Converts the given t from us to 1/fc */
#define rfalConv64fcToMs( t ) (uint32_t)( (uint32_t)(t) / (RFAL_1MS_IN_1FC / RFAL_1FC_IN_64FC) ) /*!< Converts the given t from 64/fc to ms */
#define rfalConvMsTo64fc( t ) (uint32_t)( (uint32_t)(t) * (RFAL_1MS_IN_1FC / RFAL_1FC_IN_64FC) ) /*!< Converts the given t from ms to 64/fc */
#define rfalConvBitsToBytes( n ) (uint16_t)( ((uint16_t)(n)+(RFAL_BITS_IN_BYTE-1U)) / (RFAL_BITS_IN_BYTE) ) /*!< Converts the given n from bits to bytes */
#define rfalConvBytesToBits( n ) (uint32_t)( (uint32_t)(n) * (RFAL_BITS_IN_BYTE) ) /*!< Converts the given n from bytes to bits */
/*! Computes a Transceive context \a ctx with default flags and the lengths
* in bytes with the given arguments
* \a ctx : Transceive context to be assigned
* \a tB : txBuf the pointer to the buffer to be sent
* \a tBL : txBuf length in bytes
* \a rB : rxBuf the pointer to the buffer to place the received frame
* \a rBL : rxBuf length in bytes
* \a rBL : rxBuf length in bytes
* \a t : FWT to be used on this transceive in 1/fc
*/
#define rfalCreateByteTxRxContext( ctx, tB, tBL, rB, rBL, rdL, t ) \
(ctx).txBuf = (uint8_t*)(tB); \
(ctx).txBufLen = (uint16_t)rfalConvBytesToBits(tBL); \
(ctx).rxBuf = (uint8_t*)(rB); \
(ctx).rxBufLen = (uint16_t)rfalConvBytesToBits(rBL); \
(ctx).rxRcvdLen = (uint16_t*)(rdL); \
(ctx).flags = (uint32_t)RFAL_TXRX_FLAGS_DEFAULT; \
(ctx).fwt = (uint32_t)(t);
/*! Computes a Transceive context \a ctx using lengths in bytes
* with the given flags and arguments
* \a ctx : Transceive context to be assigned
* \a tB : txBuf the pointer to the buffer to be sent
* \a tBL : txBuf length in bytes
* \a rB : rxBuf the pointer to the buffer to place the received frame
* \a rBL : rxBuf length in bytes
* \a rBL : rxBuf length in bytes
* \a t : FWT to be used on this transceive in 1/fc
*/
#define rfalCreateByteFlagsTxRxContext( ctx, tB, tBL, rB, rBL, rdL, fl, t ) \
(ctx).txBuf = (uint8_t*)(tB); \
(ctx).txBufLen = (uint16_t)rfalConvBytesToBits(tBL); \
(ctx).rxBuf = (uint8_t*)(rB); \
(ctx).rxBufLen = (uint16_t)rfalConvBytesToBits(rBL); \
(ctx).rxRcvdLen = (uint16_t*)(rdL); \
(ctx).flags = (uint32_t)(fl); \
(ctx).fwt = (uint32_t)(t);
#define rfalLogE(...) platformLog(__VA_ARGS__) /*!< Macro for the error log method */
#define rfalLogW(...) platformLog(__VA_ARGS__) /*!< Macro for the warning log method */
#define rfalLogI(...) platformLog(__VA_ARGS__) /*!< Macro for the info log method */
#define rfalLogD(...) platformLog(__VA_ARGS__) /*!< Macro for the debug log method */
/*
******************************************************************************
* GLOBAL ENUMS
******************************************************************************
*/
/* RFAL Guard Time (GT) default values */
#define RFAL_GT_NFCA rfalConvMsTo1fc(5U) /*!< GTA Digital 2.0 6.10.4.1 & B.2 */
#define RFAL_GT_NFCB rfalConvMsTo1fc(5U) /*!< GTB Digital 2.0 7.9.4.1 & B.3 */
#define RFAL_GT_NFCF rfalConvMsTo1fc(20U) /*!< GTF Digital 2.0 8.7.4.1 & B.4 */
#define RFAL_GT_NFCV rfalConvMsTo1fc(5U) /*!< GTV Digital 2.0 9.7.5.1 & B.5 */
#define RFAL_GT_PICOPASS rfalConvMsTo1fc(1U) /*!< GT Picopass */
#define RFAL_GT_AP2P rfalConvMsTo1fc(5U) /*!< TIRFG Ecma 340 11.1.1 */
#define RFAL_GT_AP2P_ADJUSTED rfalConvMsTo1fc(5U+25U) /*!< Adjusted GT for greater interoperability (Sony XPERIA P, Nokia N9, Huawei P2) */
/* RFAL Frame Delay Time (FDT) Listen default values */
#define RFAL_FDT_LISTEN_NFCA_POLLER 1172U /*!< FDTA,LISTEN,MIN (n=9) Last bit: Logic "1" - tnn,min/2 Digital 1.1 6.10 ; EMV CCP Spec Book D v2.01 4.8.1.3 */
#define RFAL_FDT_LISTEN_NFCB_POLLER 1008U /*!< TR0B,MIN Digital 1.1 7.1.3 & A.3 ; EMV CCP Spec Book D v2.01 4.8.1.3 & Table A.5 */
#define RFAL_FDT_LISTEN_NFCF_POLLER 2672U /*!< TR0F,LISTEN,MIN Digital 1.1 8.7.1.1 & A.4 */
#define RFAL_FDT_LISTEN_NFCV_POLLER 4310U /*!< FDTV,LISTEN,MIN t1 min Digital 2.1 B.5 ; ISO15693-3 2009 9.1 */
#define RFAL_FDT_LISTEN_PICOPASS_POLLER 3400U /*!< ISO15693 t1 min - observed adjustment */
#define RFAL_FDT_LISTEN_AP2P_POLLER 64U /*!< FDT AP2P No actual FDTListen is required as fields switch and collision avoidance */
#define RFAL_FDT_LISTEN_NFCA_LISTENER 1172U /*!< FDTA,LISTEN,MIN Digital 1.1 6.10 */
#define RFAL_FDT_LISTEN_NFCB_LISTENER 1024U /*!< TR0B,MIN Digital 1.1 7.1.3 & A.3 ; EMV CCP Spec Book D v2.01 4.8.1.3 & Table A.5 */
#define RFAL_FDT_LISTEN_NFCF_LISTENER 2688U /*!< TR0F,LISTEN,MIN Digital 2.1 8.7.1.1 & B.4 */
#define RFAL_FDT_LISTEN_AP2P_LISTENER 64U /*!< FDT AP2P No actual FDTListen exists as fields switch and collision avoidance */
/* RFAL Frame Delay Time (FDT) Poll default values */
#define RFAL_FDT_POLL_NFCA_POLLER 6780U /*!< FDTA,POLL,MIN Digital 1.1 6.10.3.1 & A.2 */
#define RFAL_FDT_POLL_NFCA_T1T_POLLER 384U /*!< RRDDT1T,MIN,B1 Digital 1.1 10.7.1 & A.5 */
#define RFAL_FDT_POLL_NFCB_POLLER 6780U /*!< FDTB,POLL,MIN = TR2B,MIN,DEFAULT Digital 1.1 7.9.3 & A.3 ; EMVCo 3.0 FDTB,PCD,MIN Table A.5 */
#define RFAL_FDT_POLL_NFCF_POLLER 6800U /*!< FDTF,POLL,MIN Digital 2.1 8.7.3 & B.4 */
#define RFAL_FDT_POLL_NFCV_POLLER 4192U /*!< FDTV,POLL Digital 2.1 9.7.3.1 & B.5 */
#define RFAL_FDT_POLL_PICOPASS_POLLER 1790U /*!< FDT Max */
#define RFAL_FDT_POLL_AP2P_POLLER 0U /*!< FDT AP2P No actual FDTPoll exists as fields switch and collision avoidance */
/*
******************************************************************************
* GLOBAL TYPES
******************************************************************************
*/
/*! RFAL modes */
typedef enum {
RFAL_MODE_NONE = 0, /*!< No mode selected/defined */
RFAL_MODE_POLL_NFCA = 1, /*!< Mode to perform as NFCA (ISO14443A) Poller (PCD) */
RFAL_MODE_POLL_NFCA_T1T = 2, /*!< Mode to perform as NFCA T1T (Topaz) Poller (PCD) */
RFAL_MODE_POLL_NFCB = 3, /*!< Mode to perform as NFCB (ISO14443B) Poller (PCD) */
RFAL_MODE_POLL_B_PRIME = 4, /*!< Mode to perform as B' Calypso (Innovatron) (PCD) */
RFAL_MODE_POLL_B_CTS = 5, /*!< Mode to perform as CTS Poller (PCD) */
RFAL_MODE_POLL_NFCF = 6, /*!< Mode to perform as NFCF (FeliCa) Poller (PCD) */
RFAL_MODE_POLL_NFCV = 7, /*!< Mode to perform as NFCV (ISO15963) Poller (PCD) */
RFAL_MODE_POLL_PICOPASS = 8, /*!< Mode to perform as PicoPass / iClass Poller (PCD) */
RFAL_MODE_POLL_ACTIVE_P2P = 9, /*!< Mode to perform as Active P2P (ISO18092) Initiator */
RFAL_MODE_LISTEN_NFCA = 10, /*!< Mode to perform as NFCA (ISO14443A) Listener (PICC) */
RFAL_MODE_LISTEN_NFCB = 11, /*!< Mode to perform as NFCA (ISO14443B) Listener (PICC) */
RFAL_MODE_LISTEN_NFCF = 12, /*!< Mode to perform as NFCA (ISO15963) Listener (PICC) */
RFAL_MODE_LISTEN_ACTIVE_P2P = 13 /*!< Mode to perform as Active P2P (ISO18092) Target */
} rfalMode;
/*! RFAL Bit rates */
typedef enum {
RFAL_BR_106 = 0, /*!< Bit Rate 106 kbit/s (fc/128) */
RFAL_BR_212 = 1, /*!< Bit Rate 212 kbit/s (fc/64) */
RFAL_BR_424 = 2, /*!< Bit Rate 424 kbit/s (fc/32) */
RFAL_BR_848 = 3, /*!< Bit Rate 848 kbit/s (fc/16) */
RFAL_BR_1695 = 4, /*!< Bit Rate 1695 kbit/s (fc/8) */
RFAL_BR_3390 = 5, /*!< Bit Rate 3390 kbit/s (fc/4) */
RFAL_BR_6780 = 6, /*!< Bit Rate 6780 kbit/s (fc/2) */
RFAL_BR_13560 = 7, /*!< Bit Rate 13560 kbit/s (fc) */
RFAL_BR_52p97 = 0xEB, /*!< Bit Rate 52.97 kbit/s (fc/256) Fast Mode VICC->VCD */
RFAL_BR_26p48 = 0xEC, /*!< Bit Rate 26,48 kbit/s (fc/512) NFCV VICC->VCD & VCD->VICC 1of4 */
RFAL_BR_1p66 = 0xED, /*!< Bit Rate 1,66 kbit/s (fc/8192) NFCV VCD->VICC 1of256 */
RFAL_BR_KEEP = 0xFF /*!< Value indicating to keep the same previous bit rate */
} rfalBitRate;
/*! RFAL Compliance modes for upper modules */
typedef enum {
RFAL_COMPLIANCE_MODE_NFC, /*!< Perform with NFC Forum 1.1 compliance */
RFAL_COMPLIANCE_MODE_EMV, /*!< Perform with EMVCo compliance */
RFAL_COMPLIANCE_MODE_ISO /*!< Perform with ISO10373 compliance */
}rfalComplianceMode;
/*! RFAL main states flags */
typedef enum {
RFAL_STATE_IDLE = 0,
RFAL_STATE_INIT = 1,
RFAL_STATE_MODE_SET = 2,
RFAL_STATE_TXRX = 3,
RFAL_STATE_LM = 4,
RFAL_STATE_WUM = 5
} rfalState;
/*! RFAL transceive states */
typedef enum {
RFAL_TXRX_STATE_IDLE = 0,
RFAL_TXRX_STATE_INIT = 1,
RFAL_TXRX_STATE_START = 2,
RFAL_TXRX_STATE_TX_IDLE = 11,
RFAL_TXRX_STATE_TX_WAIT_GT = 12,
RFAL_TXRX_STATE_TX_WAIT_FDT = 13,
RFAL_TXRX_STATE_TX_TRANSMIT = 14,
RFAL_TXRX_STATE_TX_WAIT_WL = 15,
RFAL_TXRX_STATE_TX_RELOAD_FIFO = 16,
RFAL_TXRX_STATE_TX_WAIT_TXE = 17,
RFAL_TXRX_STATE_TX_DONE = 18,
RFAL_TXRX_STATE_TX_FAIL = 19,
RFAL_TXRX_STATE_RX_IDLE = 81,
RFAL_TXRX_STATE_RX_WAIT_EON = 82,
RFAL_TXRX_STATE_RX_WAIT_RXS = 83,
RFAL_TXRX_STATE_RX_WAIT_RXE = 84,
RFAL_TXRX_STATE_RX_READ_FIFO = 85,
RFAL_TXRX_STATE_RX_ERR_CHECK = 86,
RFAL_TXRX_STATE_RX_READ_DATA = 87,
RFAL_TXRX_STATE_RX_WAIT_EOF = 88,
RFAL_TXRX_STATE_RX_DONE = 89,
RFAL_TXRX_STATE_RX_FAIL = 90,
} rfalTransceiveState;
/*! RFAL transceive flags */
enum {
RFAL_TXRX_FLAGS_CRC_TX_AUTO = (0U<<0), /*!< CRC will be generated automatic upon transmission */
RFAL_TXRX_FLAGS_CRC_TX_MANUAL = (1U<<0), /*!< CRC was calculated manually, included in txBuffer */
RFAL_TXRX_FLAGS_CRC_RX_KEEP = (1U<<1), /*!< Upon Reception keep the CRC in rxBuffer (reflected on rcvd length) */
RFAL_TXRX_FLAGS_CRC_RX_REMV = (0U<<1), /*!< Enable CRC check and remove the CRC from rxBuffer */
RFAL_TXRX_FLAGS_NFCIP1_ON = (1U<<2), /*!< Enable NFCIP1 mode: Add SB(F0) and LEN bytes during Tx and skip SB(F0) byte during Rx */
RFAL_TXRX_FLAGS_NFCIP1_OFF = (0U<<2), /*!< Disable NFCIP1 mode: do not append protocol bytes while Tx nor skip while Rx */
RFAL_TXRX_FLAGS_AGC_OFF = (1U<<3), /*!< Disable Automatic Gain Control, improving multiple devices collision detection */
RFAL_TXRX_FLAGS_AGC_ON = (0U<<3), /*!< Enable Automatic Gain Control, improving single device reception */
RFAL_TXRX_FLAGS_PAR_RX_KEEP = (1U<<4), /*!< Disable Parity and CRC check and keep the Parity and CRC bits in the received buffer */
RFAL_TXRX_FLAGS_PAR_RX_REMV = (0U<<0), /*!< Enable Parity check and remove the parity bits from the received buffer */
RFAL_TXRX_FLAGS_PAR_TX_NONE = (1U<<5), /*!< Disable automatic Parity generation (ISO14443A) and use the one provided in the buffer*/
RFAL_TXRX_FLAGS_PAR_TX_AUTO = (0U<<5), /*!< Enable automatic Parity generation (ISO14443A) */
RFAL_TXRX_FLAGS_NFCV_FLAG_MANUAL = (1U<<6), /*!< Disable automatic adaption of flag byte (ISO15693) according to current comm params */
RFAL_TXRX_FLAGS_NFCV_FLAG_AUTO = (0U<<6), /*!< Enable automatic adaption of flag byte (ISO115693) according to current comm params */
};
/*! RFAL error handling */
typedef enum {
RFAL_ERRORHANDLING_NONE = 0, /*!< No special error handling will be performed */
RFAL_ERRORHANDLING_NFC = 1, /*!< Error handling set to perform as NFC compliant device */
RFAL_ERRORHANDLING_EMVCO = 2 /*!< Error handling set to perform as EMVCo compliant device */
} rfalEHandling;
/*! Struct that holds all context to be used on a Transceive */
typedef struct {
uint8_t* txBuf; /*!< (In) Buffer where outgoing message is located */
uint16_t txBufLen; /*!< (In) Length of the outgoing message in bits */
uint8_t* rxBuf; /*!< (Out) Buffer where incoming message will be placed */
uint16_t rxBufLen; /*!< (In) Maximum length of the incoming message in bits */
uint16_t* rxRcvdLen; /*!< (Out) Actual received length in bits */
uint32_t flags; /*!< (In) TransceiveFlags indication special handling */
uint32_t fwt; /*!< (In) Frame Waiting Time in 1/fc */
} rfalTransceiveContext;
/*! System callback to indicate an event that requires a system reRun */
typedef void (* rfalUpperLayerCallback)(void);
/*! Callback to be executed before a Transceive */
typedef void (* rfalPreTxRxCallback)(void);
/*! Callback to be executed after a Transceive */
typedef void (* rfalPostTxRxCallback)(void);
/*******************************************************************************/
/* ISO14443A */
/*******************************************************************************/
/*! RFAL ISO 14443A Short Frame Command */
typedef enum
{
RFAL_14443A_SHORTFRAME_CMD_WUPA = 0x52, /*!< ISO14443A WUPA / NFC-A ALL_REQ */
RFAL_14443A_SHORTFRAME_CMD_REQA = 0x26 /*!< ISO14443A REQA / NFC-A SENS_REQ */
} rfal14443AShortFrameCmd;
/*******************************************************************************/
/*******************************************************************************/
/* FeliCa */
/*******************************************************************************/
#define RFAL_FELICA_LEN_LEN 1U /*!< FeliCa LEN byte length */
#define RFAL_FELICA_POLL_REQ_LEN (RFAL_FELICA_LEN_LEN + 1U + 2U + 1U + 1U) /*!< FeliCa Poll Request length (LEN + CMD + SC + RC + TSN) */
#define RFAL_FELICA_POLL_RES_LEN (RFAL_FELICA_LEN_LEN + 1U + 8U + 8U + 2U) /*!< Maximum FeliCa Poll Response length (LEN + CMD + NFCID2 + PAD + RD) */
#define RFAL_FELICA_POLL_MAX_SLOTS 16U /*!< Maximum number of slots (TSN) on FeliCa Poll */
/*! NFC-F RC (Request Code) codes NFC Forum Digital 1.1 Table 42 */
enum
{
RFAL_FELICA_POLL_RC_NO_REQUEST = 0x00, /*!< RC: No System Code information requested */
RFAL_FELICA_POLL_RC_SYSTEM_CODE = 0x01, /*!< RC: System Code information requested */
RFAL_FELICA_POLL_RC_COM_PERFORMANCE = 0x02 /*!< RC: Advanced protocol features supported */
};
/*! NFC-F TSN (Time Slot Number) codes NFC Forum Digital 1.1 Table 43 */
typedef enum
{
RFAL_FELICA_1_SLOT = 0, /*!< TSN with number of Time Slots: 1 */
RFAL_FELICA_2_SLOTS = 1, /*!< TSN with number of Time Slots: 2 */
RFAL_FELICA_4_SLOTS = 3, /*!< TSN with number of Time Slots: 4 */
RFAL_FELICA_8_SLOTS = 7, /*!< TSN with number of Time Slots: 8 */
RFAL_FELICA_16_SLOTS = 15 /*!< TSN with number of Time Slots: 16 */
} rfalFeliCaPollSlots;
/*! NFCF Poll Response NFC Forum Digital 1.1 Table 44 */
typedef uint8_t rfalFeliCaPollRes[RFAL_FELICA_POLL_RES_LEN];
/*******************************************************************************/
/*******************************************************************************/
/* Listen Mode */
/*******************************************************************************/
/*! RFAL Listen Mode NFCID Length */
typedef enum
{
RFAL_LM_NFCID_LEN_04 = RFAL_NFCID1_SINGLE_LEN, /*!< Listen mode indicates 4 byte NFCID */
RFAL_LM_NFCID_LEN_07 = RFAL_NFCID1_DOUBLE_LEN, /*!< Listen mode indicates 7 byte NFCID */
RFAL_LM_NFCID_LEN_10 = RFAL_NFCID1_TRIPLE_LEN, /*!< Listen mode indicates 10 byte NFCID */
} rfalLmNfcidLen;
/*! RFAL Listen Mode States */
typedef enum
{
RFAL_LM_STATE_NOT_INIT = 0x00, /*!< Not Initialized state */
RFAL_LM_STATE_POWER_OFF = 0x01, /*!< Power Off state */
RFAL_LM_STATE_IDLE = 0x02, /*!< Idle state Activity 1.1 5.2 */
RFAL_LM_STATE_READY_A = 0x03, /*!< Ready A state Activity 1.1 5.3 5.4 & 5.5 */
RFAL_LM_STATE_READY_B = 0x04, /*!< Ready B state Activity 1.1 5.11 5.12 */
RFAL_LM_STATE_READY_F = 0x05, /*!< Ready F state Activity 1.1 5.15 */
RFAL_LM_STATE_ACTIVE_A = 0x06, /*!< Active A state Activity 1.1 5.6 */
RFAL_LM_STATE_CARDEMU_4A = 0x07, /*!< Card Emulation 4A state Activity 1.1 5.10 */
RFAL_LM_STATE_CARDEMU_4B = 0x08, /*!< Card Emulation 4B state Activity 1.1 5.14 */
RFAL_LM_STATE_CARDEMU_3 = 0x09, /*!< Card Emulation 3 state Activity 1.1 5.18 */
RFAL_LM_STATE_TARGET_A = 0x0A, /*!< Target A state Activity 1.1 5.9 */
RFAL_LM_STATE_TARGET_F = 0x0B, /*!< Target F state Activity 1.1 5.17 */
RFAL_LM_STATE_SLEEP_A = 0x0C, /*!< Sleep A state Activity 1.1 5.7 */
RFAL_LM_STATE_SLEEP_B = 0x0D, /*!< Sleep B state Activity 1.1 5.13 */
RFAL_LM_STATE_READY_Ax = 0x0E, /*!< Ready A* state Activity 1.1 5.3 5.4 & 5.5 */
RFAL_LM_STATE_ACTIVE_Ax = 0x0F, /*!< Active A* state Activity 1.1 5.6 */
RFAL_LM_STATE_SLEEP_AF = 0x10, /*!< Sleep AF state Activity 1.1 5.19 */
} rfalLmState;
/*! RFAL Listen Mode Passive A configs */
typedef struct
{
rfalLmNfcidLen nfcidLen; /*!< NFCID Len (4, 7 or 10 bytes) */
uint8_t nfcid[RFAL_NFCID1_TRIPLE_LEN]; /*!< NFCID */
uint8_t SENS_RES[RFAL_LM_SENS_RES_LEN]; /*!< NFC-106k; SENS_REQ Response */
uint8_t SEL_RES; /*!< SEL_RES (SAK) with complete NFCID1 (UID) */
} rfalLmConfPA;
/*! RFAL Listen Mode Passive B configs */
typedef struct
{
uint8_t SENSB_RES[RFAL_LM_SENSB_RES_LEN]; /*!< SENSF_RES */
} rfalLmConfPB;
/*! RFAL Listen Mode Passive F configs */
typedef struct
{
uint8_t SC[RFAL_LM_SENSF_SC_LEN]; /*!< System Code to listen for */
uint8_t SENSF_RES[RFAL_LM_SENSF_RES_LEN]; /*!< SENSF_RES */
} rfalLmConfPF;
/*******************************************************************************/
/*******************************************************************************/
/* Wake-Up Mode */
/*******************************************************************************/
#define RFAL_WUM_REFERENCE_AUTO 0xFFU /*!< Indicates new reference is set by the driver*/
/*! RFAL Wake-Up Mode States */
typedef enum
{
RFAL_WUM_STATE_NOT_INIT = 0x00, /*!< Not Initialized state */
RFAL_WUM_STATE_ENABLED = 0x01, /*!< Wake-Up mode is enabled */
RFAL_WUM_STATE_ENABLED_WOKE = 0x02, /*!< Wake-Up mode enabled and has received IRQ(s)*/
} rfalWumState;
/*! RFAL Wake-Up Period/Timer */
typedef enum
{
RFAL_WUM_PERIOD_10MS = 0x00, /*!< Wake-Up timer 10ms */
RFAL_WUM_PERIOD_20MS = 0x01, /*!< Wake-Up timer 20ms */
RFAL_WUM_PERIOD_30MS = 0x02, /*!< Wake-Up timer 30ms */
RFAL_WUM_PERIOD_40MS = 0x03, /*!< Wake-Up timer 40ms */
RFAL_WUM_PERIOD_50MS = 0x04, /*!< Wake-Up timer 50ms */
RFAL_WUM_PERIOD_60MS = 0x05, /*!< Wake-Up timer 60ms */
RFAL_WUM_PERIOD_70MS = 0x06, /*!< Wake-Up timer 70ms */
RFAL_WUM_PERIOD_80MS = 0x07, /*!< Wake-Up timer 80ms */
RFAL_WUM_PERIOD_100MS = 0x10, /*!< Wake-Up timer 100ms */
RFAL_WUM_PERIOD_200MS = 0x11, /*!< Wake-Up timer 200ms */
RFAL_WUM_PERIOD_300MS = 0x12, /*!< Wake-Up timer 300ms */
RFAL_WUM_PERIOD_400MS = 0x13, /*!< Wake-Up timer 400ms */
RFAL_WUM_PERIOD_500MS = 0x14, /*!< Wake-Up timer 500ms */
RFAL_WUM_PERIOD_600MS = 0x15, /*!< Wake-Up timer 600ms */
RFAL_WUM_PERIOD_700MS = 0x16, /*!< Wake-Up timer 700ms */
RFAL_WUM_PERIOD_800MS = 0x17, /*!< Wake-Up timer 800ms */
} rfalWumPeriod;
/*! RFAL Wake-Up Period/Timer */
typedef enum
{
RFAL_WUM_AA_WEIGHT_4 = 0x00, /*!< Wake-Up Auto Average Weight 4 */
RFAL_WUM_AA_WEIGHT_8 = 0x01, /*!< Wake-Up Auto Average Weight 8 */
RFAL_WUM_AA_WEIGHT_16 = 0x02, /*!< Wake-Up Auto Average Weight 16 */
RFAL_WUM_AA_WEIGHT_32 = 0x03, /*!< Wake-Up Auto Average Weight 32 */
} rfalWumAAWeight;
/*! RFAL Wake-Up Mode configuration */
typedef struct
{
rfalWumPeriod period; /*!< Wake-Up Timer period;how often measurement(s) is performed */
bool irqTout; /*!< IRQ at every timeout will refresh the measurement(s) */
bool swTagDetect;/*!< Use SW Tag Detection instead of HW Wake-Up mode */
struct{
bool enabled; /*!< Inductive Amplitude measurement enabled */
uint8_t delta; /*!< Delta between the reference and measurement to wake-up */
uint16_t reference; /*!< Reference to be used;RFAL_WUM_REFERENCE_AUTO sets it auto */
bool autoAvg; /*!< Use the HW Auto Averaging feature */
bool aaInclMeas; /*!< When AutoAvg is enabled, include IRQ measurement */
rfalWumAAWeight aaWeight; /*!< When AutoAvg is enabled, last measure weight */
}indAmp; /*!< Inductive Amplitude Configuration */
struct{
bool enabled; /*!< Inductive Phase measurement enabled */
uint8_t delta; /*!< Delta between the reference and measurement to wake-up */
uint16_t reference; /*!< Reference to be used;RFAL_WUM_REFERENCE_AUTO sets it auto */
bool autoAvg; /*!< Use the HW Auto Averaging feature */
bool aaInclMeas; /*!< When AutoAvg is enabled, include IRQ measurement */
rfalWumAAWeight aaWeight; /*!< When AutoAvg is enabled, last measure weight */
}indPha; /*!< Inductive Phase Configuration */
struct{
bool enabled; /*!< Capacitive measurement enabled */
uint8_t delta; /*!< Delta between the reference and measurement to wake-up */
uint16_t reference; /*!< Reference to be used;RFAL_WUM_REFERENCE_AUTO sets it auto */
bool autoAvg; /*!< Use the HW Auto Averaging feature */
bool aaInclMeas; /*!< When AutoAvg is enabled, include IRQ measurement */
rfalWumAAWeight aaWeight; /*!< When AutoAvg is enabled, last measure weight */
}cap; /*!< Capacitive Configuration */
} rfalWakeUpConfig;
/*******************************************************************************/
/*
******************************************************************************
* GLOBAL FUNCTION PROTOTYPES
******************************************************************************
*/
/*!
*****************************************************************************
* \brief RFAL Initialize
*
* Initializes RFAL layer and the ST25R391x
* Ensures that ST25R391x is properly connected and returns error if any problem
* is detected
*
* \warning rfalAnalogConfigInitialize() should be called before so that
* the Analog config table has been previously initialized.
*
* \return ERR_HW_MISMATCH : Expected HW do not match or communication error
* \return ERR_NONE : No error
*****************************************************************************
*/
ReturnCode rfalInitialize( void );
/*!
*****************************************************************************
* \brief RFAL Calibrate
*
* Performs necessary calibration of RF chip in case it is indicated by current
* register settings. E.g. antenna calibration and regulator calibration
*
* \return ERR_WRONG_STATE : RFAL not initialized
* \return ERR_NONE : No error
*
*****************************************************************************
*/
ReturnCode rfalCalibrate( void );
/*!
*****************************************************************************
* \brief RFAL Adjust Regulators
*
* Adjusts ST25R391x regulators
*
* \param[out] result : the result of the calibrate antenna in mV
* NULL if result not requested
*
* \return ERR_WRONG_STATE : RFAL not initialized
* \return ERR_NONE : No error
*
*****************************************************************************
*/
ReturnCode rfalAdjustRegulators( uint16_t* result );
/*!
*****************************************************************************
* \brief RFAL Set System Callback
*
* Sets a callback for the driver to call when an event has occurred that
* may require the system to be notified
*
* \param[in] pFunc : method pointer for the upper layer callback
*
*****************************************************************************
*/
void rfalSetUpperLayerCallback( rfalUpperLayerCallback pFunc );
/*!
*****************************************************************************
* \brief RFAL Set Pre Tx Callback
*
* Sets a callback for the driver to call before a Transceive
*
* \param[in] pFunc : method pointer for the Pre Tx callback
*
*****************************************************************************
*/
void rfalSetPreTxRxCallback( rfalPreTxRxCallback pFunc );
/*!
*****************************************************************************
* \brief RFAL Set Post Tx Callback
*
* Sets a callback for the driver to call after a Transceive
*
* \param[in] pFunc : method pointer for the Post Tx callback
*
*****************************************************************************
*/
void rfalSetPostTxRxCallback( rfalPostTxRxCallback pFunc );
/*!
*****************************************************************************
* \brief RFAL Deinitialize
*
* Deinitializes RFAL layer and the ST25R391x
*
* \return ERR_NONE : No error
*
*****************************************************************************
*/
ReturnCode rfalDeinitialize( void );
/*!
*****************************************************************************
* \brief RFAL Set Mode
*
* Sets the mode that RFAL will operate on the following communications.
* Proper initializations will be performed on the ST25R391x
*
* \warning bit rate value RFAL_BR_KEEP is not allowed, only in rfalSetBitRate()
*
* \warning the mode will be applied immediately on the RFchip regardless of
* any ongoing operations like Transceive, ListenMode
*
* \param[in] mode : mode for the RFAL/RFchip to perform
* \param[in] txBR : transmit bit rate
* \param[in] rxBR : receive bit rate
*
* \see rfalIsGTExpired
* \see rfalMode
*
* \return ERR_WRONG_STATE : RFAL not initialized
* \return ERR_PARAM : Invalid parameter
* \return ERR_NONE : No error
*
*****************************************************************************
*/
ReturnCode rfalSetMode( rfalMode mode, rfalBitRate txBR, rfalBitRate rxBR );
/*!
*****************************************************************************
* \brief RFAL Get Mode
*
* Gets the mode that RFAL is set to operate
*
* \see rfalMode
*
* \return rfalMode : The current RFAL mode
*****************************************************************************
*/
rfalMode rfalGetMode( void );
/*!
*****************************************************************************
* \brief RFAL Set Bit Rate
*
* Sets the Tx and Rx bit rates with the given values
* The bit rate change is applied on the RF chip remaining in the same
* mode previous defined with rfalSetMode()
*
* If no mode is defined bit rates will not be applied and an error
* is returned
*
* \param[in] txBR : transmit bit rate
* \param[in] rxBR : receive bit rate
*
* \see rfalSetMode
* \see rfalMode
* \see rfalBitRate
*
* \return ERR_WRONG_STATE : RFAL not initialized
* \return ERR_PARAM : Invalid parameter
* \return ERR_NOT_IMPLEMENTED : Mode not implemented
* \return ERR_NONE : No error
*
*****************************************************************************
*/
ReturnCode rfalSetBitRate( rfalBitRate txBR, rfalBitRate rxBR );
/*!
*****************************************************************************
* \brief RFAL Get Bit Rate
*
* Gets the Tx and Rx current bit rates
*
* If RFAL is not initialized or mode not set the bit rates return will
* be invalid RFAL_BR_KEEP
*
* \param[out] txBR : RFAL's current Tx Bit Rate
* \param[out] rxBR : RFAL's current Rx Bit Rate
*
* \see rfalSetBitRate
* \see rfalBitRate
*
* \return ERR_WRONG_STATE : RFAL not initialized or mode not set
* \return ERR_NONE : No error
*****************************************************************************
*/
ReturnCode rfalGetBitRate( rfalBitRate *txBR, rfalBitRate *rxBR );
/*!
*****************************************************************************
* \brief Set Error Handling Mode
*
* Sets the error handling mode to be used by the RFAL
*
* \param[in] eHandling : the error handling mode
*
*****************************************************************************
*/
void rfalSetErrorHandling( rfalEHandling eHandling );
/*!
*****************************************************************************
* \brief Get Error Handling Mode
*
* Gets the error handling mode currently used by the RFAL
*
* \return rfalEHandling : Current error handling mode
*****************************************************************************
*/
rfalEHandling rfalGetErrorHandling( void );
/*!
*****************************************************************************
* \brief Set Observation Mode
*
* Sets ST25R391x observation modes for RF debug purposes
*
* \param[in] txMode : the observation mode to be used during transmission
* \param[in] rxMode : the observation mode to be used during reception
*
* \warning The Observation Mode is an advanced feature and should be set
* according to the documentation of the part number in use.
* Please refer to the corresponding Datasheet or Application Note(s)
*****************************************************************************
*/
void rfalSetObsvMode( uint8_t txMode, uint8_t rxMode );
/*!
*****************************************************************************
* \brief Get Observation Mode
*
* Gets ST25R391x the current configured observation modes
*
* \param[in] txMode : the current observation mode configured for transmission
* \param[in] rxMode : the current observation mode configured for reception
*
*****************************************************************************
*/
void rfalGetObsvMode( uint8_t* txMode, uint8_t* rxMode );
/*!
*****************************************************************************
* \brief Disable Observation Mode
*
* Disables the ST25R391x observation mode
*****************************************************************************
*/
void rfalDisableObsvMode( void );
/*!
*****************************************************************************
* \brief RFAL Set FDT Poll
*
* Sets the Frame Delay Time (FDT) to be used on the following
* communications.
*
* FDT Poll is the minimum time following a Poll Frame during
* which no subsequent Poll Frame can be sent (without a response from
* the Listener in between)
* FDTx,PP,MIN - Digital 1.1 6.10.2 & 7.9.2 & 8.7.2
*
* \param[in] FDTPoll : Frame Delay Time in 1/fc cycles
*
*****************************************************************************
*/
void rfalSetFDTPoll( uint32_t FDTPoll );
/*!
*****************************************************************************
* \brief RFAL Set FDT Poll
*
* Gets the current Frame Delay Time (FDT)
*
* FDT Poll is the minimum time following a Poll Frame during
* which no subsequent Poll Frame can be sent (without a response from
* the Listener in between)
* FDTx,PP,MIN - Digital 1.1 6.10.2 & 7.9.2 & 8.7.2
*
* \return FDT : current FDT value in 1/fc cycles
*
*****************************************************************************
*/
uint32_t rfalGetFDTPoll( void );
/*!
*****************************************************************************
* \brief RFAL Set FDT Listen
*
* Sets the Frame Delay Time (FDT) Listen minimum to be used on the
* following communications.
*
* FDT Listen is the minimum time between a Poll Frame and a Listen Frame
* FDTx,LISTEN,MIN - Digital 1.1 6.10.1 & 7.9.1 & 8.7.1
*
* \param[in] FDTListen : Frame Delay Time in 1/fc cycles
*
*****************************************************************************
*/
void rfalSetFDTListen( uint32_t FDTListen );
/*!
*****************************************************************************
* \brief RFAL Set FDT Listen
*
* Gets the Frame Delay Time (FDT) Listen minimum
*
* FDT Listen is the minimum time between a Poll Frame and a Listen Frame
* FDTx,LISTEN,MIN - Digital 1.1 6.10.1 & 7.9.1 & 8.7.1
*
* \return FDT : current FDT value in 1/fc cycles
*
*****************************************************************************
*/
uint32_t rfalGetFDTListen( void );
/*!
*****************************************************************************
* \brief RFAL Get GT
*
* Gets the current Guard Time (GT)
*
* GT is the minimum time when a device in Listen Mode is exposed to an
* unmodulated carrier
*
* \return GT : Guard Time in 1/fc cycles
*
*****************************************************************************
*/
uint32_t rfalGetGT( void );
/*!
*****************************************************************************
* \brief RFAL Set GT
*
* Sets the Guard Time (GT) to be used on the following communications.
*
* GT is the minimum time when a device in Listen Mode is exposed to an
* unmodulated carrier
*
* \param[in] GT : Guard Time in 1/fc cycles
* RFAL_GT_NONE if no GT should be applied
*
*****************************************************************************
*/
void rfalSetGT( uint32_t GT );
/*!
*****************************************************************************
* \brief RFAL Is GT expired
*
* Checks whether the GT timer has expired
*
* \return true : GT has expired or not running
* \return false : GT is still running
*
*****************************************************************************
*/
bool rfalIsGTExpired( void );
/*!
*****************************************************************************
* \brief RFAL Turn Field On and Start GT
*
* Turns the Field On, performing Initial Collision Avoidance
*
* After Field On, if GT was set before, it starts the GT timer to be
* used on the following communications.
*
* \return ERR_RF_COLLISION : External field detected
* \return ERR_NONE : Field turned On
*
*****************************************************************************
*/
ReturnCode rfalFieldOnAndStartGT( void );
/*!
*****************************************************************************
* \brief RFAL Turn Field Off
*
* Turns the Field Off
*
* \return ERR_NONE : Field turned Off
*****************************************************************************
*/
ReturnCode rfalFieldOff( void );
/*****************************************************************************
* Transceive *
*****************************************************************************/
/*!
*****************************************************************************
* \brief RFAL Set transceive context
*
* Set the context that will be used for the following Transceive
* Output and input buffers have to be passed and all other details prior to
* the Transceive itself has been started
*
* This method only sets the context, once set rfalWorker has
* to be executed until is done
*
* \param[in] ctx : the context for the following Transceive
*
* \see rfalWorker
* \see rfalGetTransceiveStatus
*
* \return ERR_NONE : Done with no error
* \return ERR_WRONG_STATE : Not initialized properly
* \return ERR_PARAM : Invalid parameter or configuration
*****************************************************************************
*/
ReturnCode rfalStartTransceive( const rfalTransceiveContext *ctx );
/*!
*****************************************************************************
* \brief Get Transceive State
*
* Gets current Transceive internal State
*
* \return rfalTransceiveState : the current Transceive internal State
*****************************************************************************
*/
rfalTransceiveState rfalGetTransceiveState( void );
/*!
*****************************************************************************
* \brief Get Transceive Status
*
* Gets current Transceive status
*
* \return ERR_NONE : Transceive done with no error
* \return ERR_BUSY : Transceive ongoing
* \return ERR_XXXX : Error occurred
* \return ERR_TIMEOUT : No response
* \return ERR_FRAMING : Framing error detected
* \return ERR_PAR : Parity error detected
* \return ERR_CRC : CRC error detected
* \return ERR_LINK_LOSS : Link Loss - External Field is Off
* \return ERR_RF_COLLISION : Collision detected
* \return ERR_IO : Internal error
*****************************************************************************
*/
ReturnCode rfalGetTransceiveStatus( void );
/*!
*****************************************************************************
* \brief Is Transceive in Tx
*
* Checks if Transceive is in Transmission state
*
* \return true Transmission ongoing
* \return false Not in transmission state
*****************************************************************************
*/
bool rfalIsTransceiveInTx( void );
/*!
*****************************************************************************
* \brief Is Transceive in Rx
*
* Checks if Transceive is in Reception state
*
* \return true Transmission done/reception ongoing
* \return false Not in reception state
*****************************************************************************
*/
bool rfalIsTransceiveInRx( void );
/*!
*****************************************************************************
* \brief Get Transceive RSSI
*
* Gets the RSSI value of the last executed Transceive in mV
*
* \param[out] rssi : RSSI value
*
* \return ERR_NOTSUPP : Feature not supported
* \return ERR_PARAM : Invalid parameter
* \return ERR_NONE : No error
*****************************************************************************
*/
ReturnCode rfalGetTransceiveRSSI( uint16_t *rssi );
/*!
*****************************************************************************
* \brief RFAL Worker
*
* This runs RFAL layer, which drives the actual Transceive procedure
* It MUST be executed frequently in order to execute the RFAL internal
* states and perform the requested operations
*
*****************************************************************************
*/
void rfalWorker( void );
/*****************************************************************************
* ISO1443A *
*****************************************************************************/
/*!
*****************************************************************************
* \brief Transceives an ISO14443A ShortFrame
*
* Sends REQA to detect if there is any PICC in the field
*
* \param[in] txCmd: Command to be sent:
* 0x52 WUPA / ALL_REQ
* 0x26 REQA / SENS_REQ
*
* \param[in] txCmd : type of short frame to be sent REQA or WUPA
* \param[out] rxBuf : buffer to place the response
* \param[in] rxBufLen : length of rxBuf
* \param[out] rxRcvdLen: received length
* \param[in] fwt : Frame Waiting Time in 1/fc
*
* \warning If fwt is set to RFAL_FWT_NONE it will make endlessly for
* a response, which on a blocking method may not be the
* desired usage
*
* \return ERR_NONE if there is response
* \return ERR_TIMEOUT if there is no response
* \return ERR_COLLISION collision has occurred
*
*****************************************************************************
*/
ReturnCode rfalISO14443ATransceiveShortFrame( rfal14443AShortFrameCmd txCmd, uint8_t* rxBuf, uint8_t rxBufLen, uint16_t* rxRcvdLen, uint32_t fwt );
/*!
*****************************************************************************
* \brief Sends an ISO14443A Anticollision Frame
*
* This is use to perform ISO14443A anti-collision.
* \note Anticollision is sent without CRC
*
*
* \param[in] buf : reference to ANTICOLLISION command (with known UID if any) to be sent (also out param)
* reception will be place on this buf after bytesToSend
* \param[in] bytesToSend: reference number of full bytes to be sent (including CMD byte and SEL_PAR)
* if a collision occurs will contain the number of clear bytes
* \param[in] bitsToSend : reference to number of bits (0-7) to be sent; and received (also out param)
* if a collision occurs will indicate the number of clear bits (also out param)
* \param[out] rxLength : reference to the return the received length
* \param[in] fwt : Frame Waiting Time in 1/fc
*
* \return ERR_NONE if there is no error
*****************************************************************************
*/
ReturnCode rfalISO14443ATransceiveAnticollisionFrame( uint8_t *buf, uint8_t *bytesToSend, uint8_t *bitsToSend, uint16_t *rxLength, uint32_t fwt );
/*****************************************************************************
* FeliCa *
*****************************************************************************/
/*!
*****************************************************************************
* \brief FeliCa Poll
*
* Sends a Poll Request and collects all Poll Responses according to the
* given slots
*
*
* \param[in] slots : number of slots for the Poll Request
* \param[in] sysCode : system code (SC) for the Poll Request
* \param[in] reqCode : request code (RC) for the Poll Request
* \param[out] pollResList : list of all responses
* \param[in] pollResListSize : number of responses that can be placed in pollResList
* \param[out] devicesDetected : number of cards found
* \param[out] collisionsDetected: number of collisions detected
*
* \return ERR_NONE if there is no error
* \return ERR_TIMEOUT if there is no response
*****************************************************************************
*/
ReturnCode rfalFeliCaPoll( rfalFeliCaPollSlots slots, uint16_t sysCode, uint8_t reqCode, rfalFeliCaPollRes* pollResList, uint8_t pollResListSize, uint8_t *devicesDetected, uint8_t *collisionsDetected );
/*****************************************************************************
* ISO15693 *
*****************************************************************************/
/*!
*****************************************************************************
* \brief Sends an ISO15693 Anticollision Frame
*
* This send the Anticollision|Inventory frame (INVENTORY_REQ)
*
* \warning rxBuf must be able to contain the payload and CRC
*
* \param[in] txBuf : Buffer where outgoing message is located
* \param[in] txBufLen : Length of the outgoing message in bytes
* \param[out] rxBuf : Buffer where incoming message will be placed
* \param[in] rxBufLen : Maximum length of the incoming message in bytes
* \param[out] actLen : Actual received length in bits
*
* \return ERR_NONE : Transceive done with no error
* \return ERR_WRONG_STATE : RFAL not initialized or mode not set
* \return ERR_IO : Internal error
*****************************************************************************
*/
ReturnCode rfalISO15693TransceiveAnticollisionFrame( uint8_t *txBuf, uint8_t txBufLen, uint8_t *rxBuf, uint8_t rxBufLen, uint16_t *actLen );
/*!
*****************************************************************************
* \brief Sends an ISO15693 Anticollision EOF
*
* This sends the Anticollision|Inventory EOF used as a slot marker
*
* \warning rxBuf must be able to contain the payload and CRC
*
* \param[out] rxBuf : Buffer where incoming message will be placed
* \param[in] rxBufLen : Maximum length of the incoming message in bytes
* \param[out] actLen : Actual received length in bits
*
* \return ERR_NONE : Transceive done with no error
* \return ERR_WRONG_STATE : RFAL not initialized or mode not set
* \return ERR_IO : Internal error
*****************************************************************************
*/
ReturnCode rfalISO15693TransceiveEOFAnticollision( uint8_t *rxBuf, uint8_t rxBufLen, uint16_t *actLen );
/*!
*****************************************************************************
* \brief Sends an ISO15693 EOF
*
* This is method sends an ISO15693 (EoF) used for a Write operation
*
* \warning rxBuf must be able to contain the payload and CRC
*
* \param[out] rxBuf : Buffer where incoming message will be placed
* \param[in] rxBufLen : Maximum length of the incoming message in bytes
* \param[out] actLen : Actual received length in bytes
*
* \return ERR_NONE : Transceive done with no error
* \return ERR_IO : Internal error
*****************************************************************************
*/
ReturnCode rfalISO15693TransceiveEOF( uint8_t *rxBuf, uint8_t rxBufLen, uint16_t *actLen );
/*!
*****************************************************************************
* \brief Transceive Blocking Tx
*
* This is method triggers a Transceive and executes it blocking until the
* Tx has been completed
*
* \param[in] txBuf : Buffer where outgoing message is located
* \param[in] txBufLen : Length of the outgoing message in bytes
* \param[out] rxBuf : Buffer where incoming message will be placed
* \param[in] rxBufLen : Maximum length of the incoming message in bytes
* \param[out] actLen : Actual received length in bits
* \param[in] flags : TransceiveFlags indication special handling
* \param[in] fwt : Frame Waiting Time in 1/fc
*
* \return ERR_NONE : Transceive done with no error
* \return ERR_BUSY : Transceive ongoing
* \return ERR_XXXX : Error occurred
* \return ERR_LINK_LOSS : Link Loss - External Field is Off
* \return ERR_RF_COLLISION : Collision detected
* \return ERR_IO : Internal error
*****************************************************************************
*/
ReturnCode rfalTransceiveBlockingTx( uint8_t* txBuf, uint16_t txBufLen, uint8_t* rxBuf, uint16_t rxBufLen, uint16_t* actLen, uint32_t flags, uint32_t fwt );
/*!
*****************************************************************************
* \brief Transceive Blocking Rx
*
* This is method executes the reception of an ongoing Transceive triggered
* before by rfalTransceiveBlockingTx()
*
* \return ERR_NONE : Transceive done with no error
* \return ERR_BUSY : Transceive ongoing
* \return ERR_XXXX : Error occurred
* \return ERR_TIMEOUT : No response
* \return ERR_FRAMING : Framing error detected
* \return ERR_PAR : Parity error detected
* \return ERR_CRC : CRC error detected
* \return ERR_LINK_LOSS : Link Loss - External Field is Off
* \return ERR_RF_COLLISION : Collision detected
* \return ERR_IO : Internal error
*****************************************************************************
*/
ReturnCode rfalTransceiveBlockingRx( void );
/*!
*****************************************************************************
* \brief Transceive Blocking
*
* This is method triggers a Transceive and executes it blocking until it
* has been completed
*
* \param[in] txBuf : Buffer where outgoing message is located
* \param[in] txBufLen : Length of the outgoing message in bytes
* \param[out] rxBuf : Buffer where incoming message will be placed
* \param[in] rxBufLen : Maximum length of the incoming message in bytes
* \param[out] actLen : Actual received length in bytes
* \param[in] flags : TransceiveFlags indication special handling
* \param[in] fwt : Frame Waiting Time in 1/fc
*
* \return ERR_NONE : Transceive done with no error
* \return ERR_BUSY : Transceive ongoing
* \return ERR_XXXX : Error occurred
* \return ERR_TIMEOUT : No response
* \return ERR_FRAMING : Framing error detected
* \return ERR_PAR : Parity error detected
* \return ERR_CRC : CRC error detected
* \return ERR_LINK_LOSS : Link Loss - External Field is Off
* \return ERR_RF_COLLISION : Collision detected
* \return ERR_IO : Internal error
*****************************************************************************
*/
ReturnCode rfalTransceiveBlockingTxRx( uint8_t* txBuf, uint16_t txBufLen, uint8_t* rxBuf, uint16_t rxBufLen, uint16_t* actLen, uint32_t flags, uint32_t fwt );
/*****************************************************************************
* Listen Mode *
*****************************************************************************/
/*!
*****************************************************************************
* \brief Is external Field On
*
* Checks if external field (other peer/device) is on/detected
*
* \return true External field is On
* \return false No external field is detected
*
*****************************************************************************
*/
bool rfalIsExtFieldOn( void );
/*!
*****************************************************************************
* \brief Listen Mode start
*
* Configures RF Chip to go into listen mode enabling the given technologies
*
*
* \param[in] lmMask: mask with the enabled/disabled listen modes
* use: RFAL_LM_MASK_NFCA ; RFAL_LM_MASK_NFCB ;
* RFAL_LM_MASK_NFCF ; RFAL_LM_MASK_ACTIVE_P2P
* \param[in] confA: pointer to Passive A configurations (NULL if disabled)
* \param[in] confB: pointer to Passive B configurations (NULL if disabled)
* \param[in] confF: pointer to Passive F configurations (NULL if disabled)
* \param[in] rxBuf: buffer to place incoming data
* \param[in] rxBufLen: length in bits of rxBuf
* \param[in] rxLen: pointer to write the data length in bits placed into rxBuf
*
*
* \return ERR_PARAM Invalid parameter
* \return ERR_REQUEST Invalid listen mode mask
* \return ERR_NONE Done with no error
*
*****************************************************************************
*/
ReturnCode rfalListenStart( uint32_t lmMask, const rfalLmConfPA *confA, const rfalLmConfPB *confB, const rfalLmConfPF *confF, uint8_t *rxBuf, uint16_t rxBufLen, uint16_t *rxLen );
/*!
*****************************************************************************
* \brief Listen Mode start Sleeping
*
*
*****************************************************************************
*/
ReturnCode rfalListenSleepStart( rfalLmState sleepSt, uint8_t *rxBuf, uint16_t rxBufLen, uint16_t *rxLen );
/*!
*****************************************************************************
* \brief Listen Mode Stop
*
* Disables the listen mode on the RF Chip
*
* \warning the listen mode will be disabled immediately on the RFchip regardless
* of any ongoing operations like Transceive
*
* \return ERR_NONE Done with no error
*
*****************************************************************************
*/
ReturnCode rfalListenStop( void );
/*!
*****************************************************************************
* \brief Listen Mode get state
*
* Sets the new state of the Listen Mode and applies the necessary changes
* on the RF Chip
*
* \param[out] dataFlag: indicates that Listen Mode has rcvd data and caller
* must process it. The received message is located
* at the rxBuf passed on rfalListenStart().
* rfalListenSetState() will clear this flag
* if NULL output parameter will no be written/returned
* \param[out] lastBR: bit rate detected of the last initiator request
* if NULL output parameter will no be written/returned
*
* \return rfalLmState RFAL_LM_STATE_NOT_INIT : LM not initialized properly
* Any Other : LM State
*
*****************************************************************************
*/
rfalLmState rfalListenGetState( bool *dataFlag, rfalBitRate *lastBR );
/*!
*****************************************************************************
* \brief Listen Mode set state
*
* Sets the new state of the Listen Mode and applies the necessary changes
* on the RF Chip
*
* \param[in] newSt : New state to go to
*
* \return ERR_WRONG_STATE : Not initialized properly
* \return ERR_PARAM : Invalid parameter
* \return ERR_NONE : Done with no error
*
*****************************************************************************
*/
ReturnCode rfalListenSetState( rfalLmState newSt );
/*****************************************************************************
* Wake-Up Mode *
*****************************************************************************/
/*!
*****************************************************************************
* \brief Wake-Up Mode Start
*
* Sets the RF Chip in Low Power Wake-Up Mode according to the given
* configuration.
*
* \param[in] config : Generic Wake-Up configuration provided by lower
* layers. If NULL will automatically configure the
* Wake-Up mode
*
* \return ERR_WRONG_STATE : Not initialized properly
* \return ERR_PARAM : Invalid parameter
* \return ERR_NONE : Done with no error
*
*****************************************************************************
*/
ReturnCode rfalWakeUpModeStart( const rfalWakeUpConfig *config );
/*!
*****************************************************************************
* \brief Wake-Up Has Woke
*
* Returns true if the Wake-Up mode is enabled and it has already received
* the indication from the RF Chip that the surrounding environment has changed
* and flagged at least one wake-Up interrupt
*
* \return true : Wake-Up mode enabled and has received a wake-up IRQ
* \return false : no Wake-Up IRQ has been received
*
*****************************************************************************
*/
bool rfalWakeUpModeHasWoke( void );
/*!
*****************************************************************************
* \brief Wake-Up Mode Stop
*
* Stops the Wake-Up Mode
*
* \return ERR_WRONG_STATE : Not initialized properly
* \return ERR_PARAM : Invalid parameter
* \return ERR_NONE : Done with no error
*
*****************************************************************************
*/
ReturnCode rfalWakeUpModeStop( void );
/*!
*****************************************************************************
* \brief Low Power Mode Start
*
* Sets the RF Chip in Low Power Mode.
* In this mode the RF Chip is placed in Low Power Mode, similar to Wake-up
* mode but no operation nor period measurement is performed.
* Mode must be terminated by rfalLowPowerModeStop()
*
* \return ERR_WRONG_STATE : Not initialized properly
* \return ERR_PARAM : Invalid parameter
* \return ERR_NONE : Done with no error
*
*****************************************************************************
*/
ReturnCode rfalLowPowerModeStart( void );
/*!
*****************************************************************************
* \brief Low Power Mode Stop
*
* Stops the Low Power Mode re-enabling the device
*
* \return ERR_WRONG_STATE : Not initialized properly
* \return ERR_PARAM : Invalid parameter
* \return ERR_NONE : Done with no error
*
*****************************************************************************
*/
ReturnCode rfalLowPowerModeStop( void );
#endif /* RFAL_RF_H */
/**
* @}
*
* @}
*
* @}
*/
Reference in New Issue View Git Blame Copy Permalink