flipperzero-firmware/firmware/targets/f3/api-hal/api-hal-power.c
あく 3a6fbff8c3
FL-339: cli diagnostic interface for power subsystem. (#256)
* Core, API: add externs for c++
* Makefile: improve debug speed, flash with openocd, cleanup f2 config
* Power: add cli diagnostic.
* Local: fix api hal externs
* Local: fix externs in main and flipper_hal
* F2: power state dump stabs
* Bootloader flashing with openocd
* F3: move bq drivers to libs
* temporary do not build drivers on local
* temporary do not build drivers on f2

Co-authored-by: aanper <mail@s3f.ru>
2020-12-02 13:47:13 +03:00

84 lines
3.0 KiB
C

#include <api-hal-power.h>
#include <bq27220.h>
#include <bq25896.h>
void api_hal_power_init() {
bq27220_init();
bq25896_init();
}
uint8_t api_hal_power_get_pct() {
return bq27220_get_state_of_charge();
}
bool api_hal_power_is_charging() {
return bq25896_is_charging();
}
void api_hal_power_off() {
bq25896_poweroff();
}
void api_hal_power_enable_otg() {
bq25896_enable_otg();
}
void api_hal_power_disable_otg() {
bq25896_disable_otg();
}
float api_hal_power_get_battery_voltage() {
return (float)bq27220_get_voltage() / 1000.0f;
}
float api_hal_power_get_battery_current() {
return (float)bq27220_get_current() / 1000.0f;
}
void api_hal_power_dump_state(string_t buffer) {
BatteryStatus battery_status;
OperationStatus operation_status;
if (bq27220_get_battery_status(&battery_status) == BQ27220_ERROR
|| bq27220_get_operation_status(&operation_status) == BQ27220_ERROR) {
string_cat_printf(buffer, "Failed to get bq27220 status. Communication error.\r\n");
} else {
string_cat_printf(buffer,
"bq27220: CALMD: %d, SEC0: %d, SEC1: %d, EDV2: %d, VDQ: %d, INITCOMP: %d, SMTH: %d, BTPINT: %d, CFGUPDATE: %d\r\n",
operation_status.CALMD, operation_status.SEC0, operation_status.SEC1,
operation_status.EDV2, operation_status.VDQ, operation_status.INITCOMP,
operation_status.SMTH, operation_status.BTPINT, operation_status.CFGUPDATE
);
// Battery status register, part 1
string_cat_printf(buffer,
"bq27220: CHGINH: %d, FC: %d, OTD: %d, OTC: %d, SLEEP: %d, OCVFAIL: %d, OCVCOMP: %d, FD: %d\r\n",
battery_status.CHGINH, battery_status.FC, battery_status.OTD,
battery_status.OTC, battery_status.SLEEP, battery_status.OCVFAIL,
battery_status.OCVCOMP, battery_status.FD
);
// Battery status register, part 2
string_cat_printf(buffer,
"bq27220: DSG: %d, SYSDWN: %d, TDA: %d, BATTPRES: %d, AUTH_GD: %d, OCVGD: %d, TCA: %d, RSVD: %d\r\n",
battery_status.DSG, battery_status.SYSDWN, battery_status.TDA,
battery_status.BATTPRES, battery_status.AUTH_GD, battery_status.OCVGD,
battery_status.TCA, battery_status.RSVD
);
// Voltage and current info
string_cat_printf(buffer,
"bq27220: Full capacity: %dmAh, Remaining capacity: %dmAh, State of Charge: %d%%\r\n",
bq27220_get_full_charge_capacity(), bq27220_get_remaining_capacity(),
bq27220_get_state_of_charge()
);
string_cat_printf(buffer,
"bq27220: Voltage: %dmV, Current: %dmA, Temperature: %dC\r\n",
bq27220_get_voltage(), bq27220_get_current(), (bq27220_get_temperature() - 2731)/10
);
}
string_cat_printf(buffer,
"bq25896: VBUS: %d, VSYS: %d, VBAT: %d, Current: %d, NTC: %dm%%\r\n",
bq25896_get_vbus_voltage(), bq25896_get_vsys_voltage(),
bq25896_get_vbat_voltage(), bq25896_get_vbat_current(),
bq25896_get_ntc_mpct()
);
}