281 lines
9.1 KiB
C++
281 lines
9.1 KiB
C++
#include "flipper.h"
|
|
#include "u8g2.h"
|
|
#include <stdio.h>
|
|
|
|
#include "cc1101-workaround/cc1101.h"
|
|
|
|
#define MIN_DBM -120
|
|
#define STEP_DBM 10
|
|
#define RSSI_DELAY 600 //rssi delay in micro second
|
|
|
|
#define RSSI_THRESHOLD -60
|
|
|
|
#define START_SUB_BAND 3
|
|
#define STOP_SUB_BAND 3
|
|
#define NUM_OF_SUB_BANDS 7
|
|
#define CAL_INT 20 // cal every 10 channels(every 1MHz)
|
|
|
|
// variables used to calculate rssi
|
|
uint8_t rssi_dec;
|
|
int16_t rssi_dBm;
|
|
uint8_t rssi_offset[NUM_OF_SUB_BANDS] = {74, 74, 74, 74, 74, 74, 74};
|
|
|
|
#define CHAN_SPA 0.05 // channel spacing
|
|
|
|
float base_freq[NUM_OF_SUB_BANDS] = {387, 399.8, 412.6, 425.4, 438.2, 451, 463.8};
|
|
|
|
// FREQ2,FREQ1,FREQ0
|
|
uint8_t freqSettings[NUM_OF_SUB_BANDS][3] = {
|
|
{0x0E, 0xE2, 0x76}, // band0
|
|
{0x0F, 0x60, 0x76},
|
|
{0x0F, 0xDE, 0x76}, // band1
|
|
{0x10, 0x5C, 0x76},
|
|
{0x10, 0xDA, 0x76},
|
|
{0x11, 0x58, 0x8F},
|
|
{0x11, 0xD6, 0x8F}}; // band2
|
|
|
|
// no change in TEST0 WHERE (>430.5MHz) one should change from TEST0=0x0B to 0x09
|
|
uint16_t limitTest0Reg[NUM_OF_SUB_BANDS] = {256, 256, 256, 103, 0, 0, 0};
|
|
|
|
/* setting to use 50khz channel spacing whole band*****************************************/
|
|
|
|
int16_t rssiTable[256];
|
|
uint16_t channelNumber[256];
|
|
|
|
// counter used to keep track on how many CS has been asserted
|
|
uint8_t carrierSenseCounter = 0;
|
|
|
|
uint8_t firstChannel[NUM_OF_SUB_BANDS] = {0, 0, 0, 160, 0, 0, 0};
|
|
|
|
// stop channel in each subband
|
|
uint8_t lastChannel[NUM_OF_SUB_BANDS] = {255, 255, 255, 180, 255, 255, 4};
|
|
|
|
// initialized to a value lower than the rssi threshold/ higher than channel number
|
|
int16_t highRSSI[NUM_OF_SUB_BANDS] =
|
|
{MIN_DBM, MIN_DBM, MIN_DBM, MIN_DBM, MIN_DBM, MIN_DBM, MIN_DBM};
|
|
|
|
uint16_t selectedChannel[NUM_OF_SUB_BANDS] = {300, 300, 300, 300, 300, 300, 300};
|
|
|
|
int8_t activeBand; // store subband that contains strongest signal
|
|
uint16_t activeChannel;
|
|
|
|
int16_t calRSSI(uint8_t rssi_dec, uint8_t rssiOffset) {
|
|
int16_t rssi;
|
|
|
|
if(rssi_dec >= 128) {
|
|
rssi = (int16_t)((int16_t)(rssi_dec - 256) / 2) - rssiOffset;
|
|
} else {
|
|
rssi = (rssi_dec / 2) - rssiOffset;
|
|
}
|
|
|
|
return rssi;
|
|
}
|
|
|
|
void scanFreq(CC1101* cc1101) {
|
|
uint8_t calCounter; // to determine when to calibrate
|
|
uint8_t subBand;
|
|
uint16_t channel;
|
|
uint16_t i;
|
|
|
|
float freq;
|
|
|
|
cc1101->SpiWriteReg(CC1101_MCSM0, 0x08); // disalbe FS_AUTOCAL
|
|
cc1101->SpiWriteReg(CC1101_AGCCTRL2, 0x43 | 0x0C); // MAX_DVGA_GAIN to 11 for fast rssi
|
|
cc1101->SpiWriteReg(CC1101_AGCCTRL0, 0xB0); // max AGC WAIT_TIME; 0 filter_length
|
|
cc1101->SetMod(GFSK); // set to GFSK for fast rssi measurement | +8 is dcfilter off
|
|
|
|
// 1) loop through all sub bands
|
|
for(subBand = START_SUB_BAND; subBand < STOP_SUB_BAND + 1; subBand++) {
|
|
// 1.1) set subBands freq by FREQ2, FREQ1, FREQ0
|
|
cc1101->SetFreq(
|
|
freqSettings[subBand][0], freqSettings[subBand][1], freqSettings[subBand][2]);
|
|
// 1.2) set TEST0--maybe!
|
|
// 1.3) reset calibration counter
|
|
calCounter = 0;
|
|
// 1.4) loop throuhg all channels
|
|
for(channel = firstChannel[subBand]; channel <= lastChannel[subBand]; channel++) {
|
|
uint8_t pktStatus;
|
|
// 1.4.1) set channel register
|
|
cc1101->SetChannel(channel);
|
|
|
|
// 1.4.2) set TEST0
|
|
if(channel == limitTest0Reg[subBand]) {
|
|
//set test0 to 0x09
|
|
cc1101->SpiWriteReg(CC1101_TEST0, 0x09);
|
|
//set FSCAL2 to 0x2A to force VCO HIGH
|
|
cc1101->SpiWriteReg(CC1101_FSCAL2, 0x2A);
|
|
//clear calCounter to invoke mannual calibration
|
|
calCounter = 0;
|
|
}
|
|
// 1.4.3) calibrate every 1MHz
|
|
if(calCounter++ == 0) {
|
|
// perform a manual calibration by issuing SCAL command
|
|
cc1101->SpiStrobe(CC1101_SCAL);
|
|
}
|
|
// 1.4.4) reset calCounter when 1MHz reached
|
|
if(calCounter == CAL_INT) {
|
|
calCounter = 0;
|
|
}
|
|
// 1.4.5-6 enter rx mode
|
|
cc1101->SetReceive();
|
|
// 1.4.7 wait for RSSI to be valid: less than 1.5ms
|
|
delayMicroseconds(RSSI_DELAY);
|
|
// 1.4.8) read PKTSTATUS register while the radio is in RX state
|
|
pktStatus = cc1101->SpiReadStatus(CC1101_PKTSTATUS);
|
|
// 1.4.9) enter IDLE state by issuing a SIDLE command
|
|
cc1101->SpiStrobe(CC1101_SIDLE);
|
|
// 1.4.10) check if CS is assearted
|
|
// //read rssi value and converto to dBm form
|
|
rssi_dec = (uint8_t)cc1101->SpiReadStatus(CC1101_RSSI);
|
|
rssi_dBm = calRSSI(rssi_dec, rssi_offset[subBand]);
|
|
|
|
// rssiData[subBand][channel]=rssi_dBm;
|
|
if(pktStatus & 0x40) { //CS assearted
|
|
// store rssi value and corresponding channel number
|
|
rssiTable[carrierSenseCounter] = rssi_dBm;
|
|
channelNumber[carrierSenseCounter] = channel;
|
|
carrierSenseCounter++;
|
|
}
|
|
|
|
#ifdef CC1101_DEBUG
|
|
printf("rssi_dBm: %d\n", rssi_dBm);
|
|
#endif
|
|
} // end channel lop
|
|
|
|
// 1.5)before moving to next sub band,
|
|
// scan through rssiTable to find highest rssi value
|
|
for(i = 0; i < carrierSenseCounter; i++) {
|
|
if(rssiTable[i] > highRSSI[subBand]) {
|
|
highRSSI[subBand] = rssiTable[i];
|
|
selectedChannel[subBand] = channelNumber[i];
|
|
}
|
|
}
|
|
|
|
// printf("subBand:------------------>");
|
|
// Serial.println(subBand);
|
|
// Serial.print("selectedChannel:");
|
|
// Serial.println(selectedChannel[subBand]);
|
|
// Serial.print("highRSSI:");
|
|
// Serial.println(highRSSI[subBand]);
|
|
|
|
// 1.6) reset carrierSenseCounter
|
|
carrierSenseCounter = 0;
|
|
} // end band loop
|
|
|
|
// 2) when all sub bands has been scanned , find best subband and channel
|
|
int16_t tempRssi = MIN_DBM;
|
|
for(subBand = 0; subBand < NUM_OF_SUB_BANDS; subBand++) {
|
|
if(highRSSI[subBand] > tempRssi) {
|
|
tempRssi = highRSSI[subBand];
|
|
activeChannel = selectedChannel[subBand];
|
|
activeBand = subBand;
|
|
}
|
|
}
|
|
|
|
// printf("activeBand:**********> %d, activeChannel %d,\n", activeBand, activeChannel);
|
|
|
|
cc1101->SpiWriteReg(CC1101_MCSM0, 0x18); //enable FS_AUTOCAL
|
|
cc1101->SpiWriteReg(CC1101_AGCCTRL2, 0x43); //back to recommended config
|
|
cc1101->SpiWriteReg(CC1101_AGCCTRL0, 0x91); //back to recommended config
|
|
}
|
|
|
|
void jamming(CC1101* cc1101, uint8_t band, uint16_t channel, uint16_t miniSec) {
|
|
cc1101->SetFreq(freqSettings[band][0], freqSettings[band][1], freqSettings[band][2]);
|
|
cc1101->SetChannel(channel);
|
|
// digitalWrite(19,0);
|
|
cc1101->SetTransmit();
|
|
delay(miniSec);
|
|
|
|
cc1101->SpiStrobe(CC1101_SIDLE);
|
|
}
|
|
|
|
extern "C" void cc1101_workaround(void* p) {
|
|
FuriRecordSubscriber* fb_record =
|
|
furi_open_deprecated("u8g2_fb", false, false, NULL, NULL, NULL);
|
|
|
|
if(fb_record == NULL) {
|
|
printf("[cc1101] cannot create fb record\n");
|
|
furiac_exit(NULL);
|
|
}
|
|
|
|
printf("[cc1101] creating device\n");
|
|
|
|
CC1101 cc1101(GpioPin{CC1101_CS_GPIO_Port, CC1101_CS_Pin});
|
|
|
|
printf("[cc1101] init device\n");
|
|
|
|
uint8_t address = cc1101.Init();
|
|
|
|
if(address > 0) {
|
|
printf("CC1101 init done: %d\n", address);
|
|
} else {
|
|
printf("CC1101 init fail\n");
|
|
}
|
|
|
|
// RX filter bandwidth 58.035714(0xFD) 100k(0xCD) 200k(0x8D)
|
|
cc1101.SpiWriteReg(CC1101_MDMCFG4, 0xCD);
|
|
// datarate config 250kBaud for the purpose of fast rssi measurement
|
|
cc1101.SpiWriteReg(CC1101_MDMCFG3, 0x3B);
|
|
// FEC preamble etc. last 2 bits for channel spacing
|
|
cc1101.SpiWriteReg(CC1101_MDMCFG1, 0x20);
|
|
// 50khz channel spacing
|
|
cc1101.SpiWriteReg(CC1101_MDMCFG0, 0xF8);
|
|
|
|
while(1) {
|
|
u8g2_t* fb = (u8g2_t*)furi_take(fb_record);
|
|
if(fb != NULL) {
|
|
u8g2_SetFont(fb, u8g2_font_6x10_mf);
|
|
u8g2_SetDrawColor(fb, 1);
|
|
u8g2_SetFontMode(fb, 1);
|
|
u8g2_DrawStr(fb, 2, 12, "cc1101 workaround");
|
|
}
|
|
furi_commit(fb_record);
|
|
|
|
/*
|
|
for(uint8_t i = 0; i <= NUM_OF_SUB_BANDS; i++) {
|
|
highRSSI[i] = MIN_DBM;
|
|
}
|
|
|
|
activeChannel = 300;
|
|
|
|
jamming(&cc1101, activeBand, activeChannel, 500);
|
|
|
|
scanFreq(&cc1101);
|
|
|
|
if(activeChannel < 256 && highRSSI[activeBand] > RSSI_THRESHOLD) {
|
|
float freq = base_freq[activeBand] + CHAN_SPA * activeChannel;
|
|
|
|
printf(
|
|
"channel: %d, freq: %d, RSSI: %d\n",
|
|
activeChannel,
|
|
(uint32_t)(freq * 1000),
|
|
highRSSI[activeBand]
|
|
);
|
|
|
|
/*
|
|
if(jamm_on) {
|
|
jamming(&cc1101, activeBand, activeChannel, 500);
|
|
} else {
|
|
osDelay(1000);
|
|
}
|
|
*
|
|
} else {
|
|
// printf("0 carrier sensed\n");
|
|
}
|
|
*/
|
|
|
|
uint8_t band = 4; // 438.2 MHz
|
|
|
|
/*
|
|
cc1101.SetFreq(freqSettings[band][0], freqSettings[band][1], freqSettings[band][2]);
|
|
cc1101.SetChannel(0);
|
|
cc1101.SetTransmit();
|
|
|
|
delay(5000);
|
|
|
|
cc1101.SpiStrobe(CC1101_SIDLE);
|
|
*/
|
|
|
|
delay(1000);
|
|
}
|
|
} |