3108dc7c8c
* test run, moved updated to separate physical runner/flipper/card * simplified units, removed re-flashing, moved format to beginning of run * added reboot requence and mini optimizations * forgot gitadd, added script modifications, workflow changes * fixed linter issues * moved updater to unit bench for speed up * changes to units, flash (not full) on second update, new fbt GDB thread check * changed serial of second device * testing pipelines, added failing unit test * fixed gdb step * fixed gdb step v2 electric boogaloo * fixed gdb step v3, fixed target * reverted while1 in units, tests complete * testing colored output * trying different term setting * debug outputs for terminal * fixed typo in SConstruct and another terminal test * reverted changes, no colored output, for production * fixed log output to readable format * fixed linter Co-authored-by: Konstantin Volkov <k.volkov@flipperdevices.com> Co-authored-by: あく <alleteam@gmail.com>
About
This folder contains supplementary scripts that automates routine actions. Flashing scripts are based on cli version of STM32CubeProgrammer. You will need to add STM32_Programmer_CLI to your path to use them.
Flashing empty MCU/Flipper
Always flash your device in the following sequence:
- OTP (Only on empty MCU)
- Core1 and Core2 firmware flashing
- Option Bytes
Otp flashing
!!! Flashing incorrect OTP may permanently brick your device !!!
Normally OTP data generated and flashed at the factory.
In case if MCU was replaced you'll need correct OTP data to be able to use companion applications.
Use otp.py to generate and flash OTP data.
You will need exact main board revision to generate OTP data. It can be found on main PCB.
Also display type, region and etc...
!!! Flashing incorrect OTP may permanently brick your device !!!
Core1 and Core2 firmware flashing
Core2 goes first, then Core1. Never flash FUS or you will loose your job, girlfriend and keys in secure enclave.
Option Bytes
!!! Setting incorrect Option Bytes may brick your MCU !!!
Defaults are mostly OK, but there are couple things that we'd like to tune. Also OB may be damaged, so we've made couple scripts to check and set option bytes.
!!! Setting incorrect Option Bytes may brick your MCU !!!
Checking option bytes:
ob.py check
Setting option bytes:
ob.py set
Assets delivery
Run in the root folder of the repo:
python scripts/storage.py -p <flipper_cli_port> send assets/resources /ext
Slideshow creation
Put fullscreen slideshow frames in .png format into assets/slideshow/my_show folder, named frame_xx.png, where xx is zero-padded frame number, starting with #0.
Then run
python scripts/slideshow.py -i assets/slideshow/my_show/ -o assets/slideshow/my_show/.slideshow
Upload generated .slideshow file to Flipper's internal storage and restart it.