flipperzero-firmware/applications/gpio/usb_uart_bridge.c
あく 389ff92cc1
Naming and coding style convention, new linter tool. (#945)
* Makefile, Scripts: new linter
* About: remove ID from IC
* Firmware: remove double define for DIVC/DIVR
* Scripts: check folder names too. Docker: replace syntax check with make lint.
* Reformat Sources and Migrate to new file naming convention
* Docker: symlink clang-format-12 to clang-format
* Add coding style guide
2022-01-05 19:10:18 +03:00

355 lines
13 KiB
C

#include "usb_uart_bridge.h"
#include "furi_hal.h"
#include <stream_buffer.h>
#include <furi_hal_usb_cdc_i.h>
#include "usb_cdc.h"
#define USB_CDC_PKT_LEN CDC_DATA_SZ
#define USB_UART_RX_BUF_SIZE (USB_CDC_PKT_LEN * 5)
#define USB_CDC_BIT_DTR (1 << 0)
#define USB_CDC_BIT_RTS (1 << 1)
static const GpioPin* flow_pins[][2] = {
{&gpio_ext_pa7, &gpio_ext_pa6}, // 2, 3
{&gpio_ext_pb2, &gpio_ext_pc3}, // 6, 7
};
typedef enum {
WorkerEvtReserved = (1 << 0), // Reserved for StreamBuffer internal event
WorkerEvtStop = (1 << 1),
WorkerEvtRxDone = (1 << 2),
WorkerEvtTxStop = (1 << 3),
WorkerEvtCdcRx = (1 << 4),
WorkerEvtCfgChange = (1 << 5),
WorkerEvtLineCfgSet = (1 << 6),
WorkerEvtCtrlLineSet = (1 << 7),
} WorkerEvtFlags;
#define WORKER_ALL_RX_EVENTS \
(WorkerEvtStop | WorkerEvtRxDone | WorkerEvtCfgChange | WorkerEvtLineCfgSet | \
WorkerEvtCtrlLineSet)
#define WORKER_ALL_TX_EVENTS (WorkerEvtTxStop | WorkerEvtCdcRx)
struct UsbUartBridge {
UsbUartConfig cfg;
UsbUartConfig cfg_new;
FuriThread* thread;
FuriThread* tx_thread;
StreamBufferHandle_t rx_stream;
osMutexId_t usb_mutex;
osSemaphoreId_t tx_sem;
UsbUartState st;
uint8_t rx_buf[USB_CDC_PKT_LEN];
};
static void vcp_on_cdc_tx_complete(void* context);
static void vcp_on_cdc_rx(void* context);
static void vcp_state_callback(void* context, uint8_t state);
static void vcp_on_cdc_control_line(void* context, uint8_t state);
static void vcp_on_line_config(void* context, struct usb_cdc_line_coding* config);
static const CdcCallbacks cdc_cb = {
vcp_on_cdc_tx_complete,
vcp_on_cdc_rx,
vcp_state_callback,
vcp_on_cdc_control_line,
vcp_on_line_config,
};
/* USB UART worker */
static int32_t usb_uart_tx_thread(void* context);
static void usb_uart_on_irq_cb(UartIrqEvent ev, uint8_t data, void* context) {
UsbUartBridge* usb_uart = (UsbUartBridge*)context;
BaseType_t xHigherPriorityTaskWoken = pdFALSE;
if(ev == UartIrqEventRXNE) {
xStreamBufferSendFromISR(usb_uart->rx_stream, &data, 1, &xHigherPriorityTaskWoken);
osThreadFlagsSet(furi_thread_get_thread_id(usb_uart->thread), WorkerEvtRxDone);
portYIELD_FROM_ISR(xHigherPriorityTaskWoken);
}
}
static void usb_uart_vcp_init(UsbUartBridge* usb_uart, uint8_t vcp_ch) {
if(vcp_ch == 0) {
furi_hal_usb_set_config(&usb_cdc_single);
furi_hal_vcp_disable();
} else {
furi_hal_usb_set_config(&usb_cdc_dual);
}
furi_hal_cdc_set_callbacks(vcp_ch, (CdcCallbacks*)&cdc_cb, usb_uart);
}
static void usb_uart_vcp_deinit(UsbUartBridge* usb_uart, uint8_t vcp_ch) {
furi_hal_cdc_set_callbacks(vcp_ch, NULL, NULL);
if(vcp_ch == 0) furi_hal_vcp_enable();
}
static void usb_uart_serial_init(UsbUartBridge* usb_uart, uint8_t uart_ch) {
if(uart_ch == FuriHalUartIdUSART1) {
furi_hal_console_disable();
} else if(uart_ch == FuriHalUartIdLPUART1) {
furi_hal_uart_init(uart_ch, 115200);
}
furi_hal_uart_set_irq_cb(uart_ch, usb_uart_on_irq_cb, usb_uart);
}
static void usb_uart_serial_deinit(UsbUartBridge* usb_uart, uint8_t uart_ch) {
furi_hal_uart_set_irq_cb(uart_ch, NULL, NULL);
if(uart_ch == FuriHalUartIdUSART1)
furi_hal_console_enable();
else if(uart_ch == FuriHalUartIdLPUART1)
furi_hal_uart_deinit(uart_ch);
}
static void usb_uart_set_baudrate(UsbUartBridge* usb_uart, uint32_t baudrate) {
if(baudrate != 0) {
furi_hal_uart_set_br(usb_uart->cfg.uart_ch, baudrate);
usb_uart->st.baudrate_cur = baudrate;
} else {
struct usb_cdc_line_coding* line_cfg =
furi_hal_cdc_get_port_settings(usb_uart->cfg.vcp_ch);
if(line_cfg->dwDTERate > 0) {
furi_hal_uart_set_br(usb_uart->cfg.uart_ch, line_cfg->dwDTERate);
usb_uart->st.baudrate_cur = line_cfg->dwDTERate;
}
}
}
static void usb_uart_update_ctrl_lines(UsbUartBridge* usb_uart) {
if(usb_uart->cfg.flow_pins != 0) {
furi_assert((usb_uart->cfg.flow_pins - 1) < (sizeof(flow_pins) / sizeof(flow_pins[0])));
uint8_t state = furi_hal_cdc_get_ctrl_line_state(usb_uart->cfg.vcp_ch);
hal_gpio_write(flow_pins[usb_uart->cfg.flow_pins - 1][0], !(state & USB_CDC_BIT_RTS));
hal_gpio_write(flow_pins[usb_uart->cfg.flow_pins - 1][1], !(state & USB_CDC_BIT_DTR));
}
}
static int32_t usb_uart_worker(void* context) {
UsbUartBridge* usb_uart = (UsbUartBridge*)context;
memcpy(&usb_uart->cfg, &usb_uart->cfg_new, sizeof(UsbUartConfig));
usb_uart->rx_stream = xStreamBufferCreate(USB_UART_RX_BUF_SIZE, 1);
usb_uart->tx_sem = osSemaphoreNew(1, 1, NULL);
usb_uart->usb_mutex = osMutexNew(NULL);
usb_uart->tx_thread = furi_thread_alloc();
furi_thread_set_name(usb_uart->tx_thread, "UsbUartTxWorker");
furi_thread_set_stack_size(usb_uart->tx_thread, 512);
furi_thread_set_context(usb_uart->tx_thread, usb_uart);
furi_thread_set_callback(usb_uart->tx_thread, usb_uart_tx_thread);
UsbInterface* usb_mode_prev = furi_hal_usb_get_config();
usb_uart_vcp_init(usb_uart, usb_uart->cfg.vcp_ch);
usb_uart_serial_init(usb_uart, usb_uart->cfg.uart_ch);
usb_uart_set_baudrate(usb_uart, usb_uart->cfg.baudrate);
if(usb_uart->cfg.flow_pins != 0) {
furi_assert((usb_uart->cfg.flow_pins - 1) < (sizeof(flow_pins) / sizeof(flow_pins[0])));
hal_gpio_init_simple(flow_pins[usb_uart->cfg.flow_pins - 1][0], GpioModeOutputPushPull);
hal_gpio_init_simple(flow_pins[usb_uart->cfg.flow_pins - 1][1], GpioModeOutputPushPull);
usb_uart_update_ctrl_lines(usb_uart);
}
osThreadFlagsSet(furi_thread_get_thread_id(usb_uart->tx_thread), WorkerEvtCdcRx);
furi_thread_start(usb_uart->tx_thread);
while(1) {
uint32_t events = osThreadFlagsWait(WORKER_ALL_RX_EVENTS, osFlagsWaitAny, osWaitForever);
furi_check((events & osFlagsError) == 0);
if(events & WorkerEvtStop) break;
if(events & WorkerEvtRxDone) {
size_t len =
xStreamBufferReceive(usb_uart->rx_stream, usb_uart->rx_buf, USB_CDC_PKT_LEN, 0);
if(len > 0) {
if(osSemaphoreAcquire(usb_uart->tx_sem, 100) == osOK) {
usb_uart->st.rx_cnt += len;
furi_check(osMutexAcquire(usb_uart->usb_mutex, osWaitForever) == osOK);
furi_hal_cdc_send(usb_uart->cfg.vcp_ch, usb_uart->rx_buf, len);
furi_check(osMutexRelease(usb_uart->usb_mutex) == osOK);
} else {
xStreamBufferReset(usb_uart->rx_stream);
}
}
}
if(events & WorkerEvtCfgChange) {
if(usb_uart->cfg.vcp_ch != usb_uart->cfg_new.vcp_ch) {
osThreadFlagsSet(furi_thread_get_thread_id(usb_uart->tx_thread), WorkerEvtTxStop);
furi_thread_join(usb_uart->tx_thread);
usb_uart_vcp_deinit(usb_uart, usb_uart->cfg.vcp_ch);
usb_uart_vcp_init(usb_uart, usb_uart->cfg_new.vcp_ch);
usb_uart->cfg.vcp_ch = usb_uart->cfg_new.vcp_ch;
furi_thread_start(usb_uart->tx_thread);
events |= WorkerEvtCtrlLineSet;
events |= WorkerEvtLineCfgSet;
}
if(usb_uart->cfg.uart_ch != usb_uart->cfg_new.uart_ch) {
osThreadFlagsSet(furi_thread_get_thread_id(usb_uart->tx_thread), WorkerEvtTxStop);
furi_thread_join(usb_uart->tx_thread);
usb_uart_serial_deinit(usb_uart, usb_uart->cfg.uart_ch);
usb_uart_serial_init(usb_uart, usb_uart->cfg_new.uart_ch);
usb_uart->cfg.uart_ch = usb_uart->cfg_new.uart_ch;
usb_uart_set_baudrate(usb_uart, usb_uart->cfg.baudrate);
furi_thread_start(usb_uart->tx_thread);
}
if(usb_uart->cfg.baudrate != usb_uart->cfg_new.baudrate) {
usb_uart_set_baudrate(usb_uart, usb_uart->cfg_new.baudrate);
usb_uart->cfg.baudrate = usb_uart->cfg_new.baudrate;
}
if(usb_uart->cfg.flow_pins != usb_uart->cfg_new.flow_pins) {
if(usb_uart->cfg.flow_pins != 0) {
hal_gpio_init_simple(
flow_pins[usb_uart->cfg.flow_pins - 1][0], GpioModeAnalog);
hal_gpio_init_simple(
flow_pins[usb_uart->cfg.flow_pins - 1][1], GpioModeAnalog);
}
if(usb_uart->cfg_new.flow_pins != 0) {
furi_assert(
(usb_uart->cfg_new.flow_pins - 1) <
(sizeof(flow_pins) / sizeof(flow_pins[0])));
hal_gpio_init_simple(
flow_pins[usb_uart->cfg_new.flow_pins - 1][0], GpioModeOutputPushPull);
hal_gpio_init_simple(
flow_pins[usb_uart->cfg_new.flow_pins - 1][1], GpioModeOutputPushPull);
}
usb_uart->cfg.flow_pins = usb_uart->cfg_new.flow_pins;
events |= WorkerEvtCtrlLineSet;
}
}
if(events & WorkerEvtLineCfgSet) {
if(usb_uart->cfg.baudrate == 0)
usb_uart_set_baudrate(usb_uart, usb_uart->cfg.baudrate);
}
if(events & WorkerEvtCtrlLineSet) {
usb_uart_update_ctrl_lines(usb_uart);
}
}
usb_uart_vcp_deinit(usb_uart, usb_uart->cfg.vcp_ch);
usb_uart_serial_deinit(usb_uart, usb_uart->cfg.uart_ch);
furi_hal_usb_set_config(usb_mode_prev);
if(usb_uart->cfg.flow_pins != 0) {
hal_gpio_init_simple(flow_pins[usb_uart->cfg.flow_pins - 1][0], GpioModeAnalog);
hal_gpio_init_simple(flow_pins[usb_uart->cfg.flow_pins - 1][1], GpioModeAnalog);
}
osThreadFlagsSet(furi_thread_get_thread_id(usb_uart->tx_thread), WorkerEvtTxStop);
furi_thread_join(usb_uart->tx_thread);
furi_thread_free(usb_uart->tx_thread);
vStreamBufferDelete(usb_uart->rx_stream);
osMutexDelete(usb_uart->usb_mutex);
osSemaphoreDelete(usb_uart->tx_sem);
return 0;
}
static int32_t usb_uart_tx_thread(void* context) {
UsbUartBridge* usb_uart = (UsbUartBridge*)context;
uint8_t data[USB_CDC_PKT_LEN];
while(1) {
uint32_t events = osThreadFlagsWait(WORKER_ALL_TX_EVENTS, osFlagsWaitAny, osWaitForever);
furi_check((events & osFlagsError) == 0);
if(events & WorkerEvtTxStop) break;
if(events & WorkerEvtCdcRx) {
furi_check(osMutexAcquire(usb_uart->usb_mutex, osWaitForever) == osOK);
size_t len = furi_hal_cdc_receive(usb_uart->cfg.vcp_ch, data, USB_CDC_PKT_LEN);
furi_check(osMutexRelease(usb_uart->usb_mutex) == osOK);
if(len > 0) {
usb_uart->st.tx_cnt += len;
furi_hal_uart_tx(usb_uart->cfg.uart_ch, data, len);
}
}
}
return 0;
}
/* VCP callbacks */
static void vcp_on_cdc_tx_complete(void* context) {
UsbUartBridge* usb_uart = (UsbUartBridge*)context;
osSemaphoreRelease(usb_uart->tx_sem);
}
static void vcp_on_cdc_rx(void* context) {
UsbUartBridge* usb_uart = (UsbUartBridge*)context;
osThreadFlagsSet(furi_thread_get_thread_id(usb_uart->tx_thread), WorkerEvtCdcRx);
}
static void vcp_state_callback(void* context, uint8_t state) {
}
static void vcp_on_cdc_control_line(void* context, uint8_t state) {
UsbUartBridge* usb_uart = (UsbUartBridge*)context;
osThreadFlagsSet(furi_thread_get_thread_id(usb_uart->thread), WorkerEvtCtrlLineSet);
}
static void vcp_on_line_config(void* context, struct usb_cdc_line_coding* config) {
UsbUartBridge* usb_uart = (UsbUartBridge*)context;
osThreadFlagsSet(furi_thread_get_thread_id(usb_uart->thread), WorkerEvtLineCfgSet);
}
UsbUartBridge* usb_uart_enable(UsbUartConfig* cfg) {
UsbUartBridge* usb_uart = furi_alloc(sizeof(UsbUartBridge));
memcpy(&(usb_uart->cfg_new), cfg, sizeof(UsbUartConfig));
usb_uart->thread = furi_thread_alloc();
furi_thread_set_name(usb_uart->thread, "UsbUartWorker");
furi_thread_set_stack_size(usb_uart->thread, 1024);
furi_thread_set_context(usb_uart->thread, usb_uart);
furi_thread_set_callback(usb_uart->thread, usb_uart_worker);
furi_thread_start(usb_uart->thread);
return usb_uart;
}
void usb_uart_disable(UsbUartBridge* usb_uart) {
furi_assert(usb_uart);
osThreadFlagsSet(furi_thread_get_thread_id(usb_uart->thread), WorkerEvtStop);
furi_thread_join(usb_uart->thread);
furi_thread_free(usb_uart->thread);
free(usb_uart);
}
void usb_uart_set_config(UsbUartBridge* usb_uart, UsbUartConfig* cfg) {
furi_assert(usb_uart);
furi_assert(cfg);
memcpy(&(usb_uart->cfg_new), cfg, sizeof(UsbUartConfig));
osThreadFlagsSet(furi_thread_get_thread_id(usb_uart->thread), WorkerEvtCfgChange);
}
void usb_uart_get_config(UsbUartBridge* usb_uart, UsbUartConfig* cfg) {
furi_assert(usb_uart);
furi_assert(cfg);
memcpy(cfg, &(usb_uart->cfg_new), sizeof(UsbUartConfig));
}
void usb_uart_get_state(UsbUartBridge* usb_uart, UsbUartState* st) {
furi_assert(usb_uart);
furi_assert(st);
memcpy(st, &(usb_uart->st), sizeof(UsbUartState));
}