f070815535
* Bootloader: LSE and RTS shenanigans, LED control, morse code for LSE failure error. * Bootloader: add errata fix for flash controller * Bootloader: target spelling
180 lines
6.0 KiB
C
180 lines
6.0 KiB
C
#include <target.h>
|
|
#include <stm32wbxx.h>
|
|
#include <stm32wbxx_ll_system.h>
|
|
#include <stm32wbxx_ll_bus.h>
|
|
#include <stm32wbxx_ll_utils.h>
|
|
#include <stm32wbxx_ll_rcc.h>
|
|
#include <stm32wbxx_ll_rtc.h>
|
|
#include <stm32wbxx_ll_pwr.h>
|
|
#include <stm32wbxx_ll_gpio.h>
|
|
#include <stm32wbxx_hal_flash.h>
|
|
|
|
// Boot request enum
|
|
#define BOOT_REQUEST_NONE 0x00000000
|
|
#define BOOT_REQUEST_DFU 0xDF00B000
|
|
// Boot to DFU pin
|
|
#define BOOT_DFU_PORT GPIOB
|
|
#define BOOT_DFU_PIN LL_GPIO_PIN_11
|
|
// LCD backlight
|
|
#define BOOT_LCD_BL_PORT GPIOA
|
|
#define BOOT_LCD_BL_PIN LL_GPIO_PIN_15
|
|
// LEDs
|
|
#define LED_RED_PORT GPIOA
|
|
#define LED_RED_PIN LL_GPIO_PIN_1
|
|
#define LED_GREEN_PORT GPIOA
|
|
#define LED_GREEN_PIN LL_GPIO_PIN_2
|
|
#define LED_BLUE_PORT GPIOA
|
|
#define LED_BLUE_PIN LL_GPIO_PIN_3
|
|
// USB pins
|
|
#define BOOT_USB_PORT GPIOA
|
|
#define BOOT_USB_DM_PIN LL_GPIO_PIN_11
|
|
#define BOOT_USB_DP_PIN LL_GPIO_PIN_12
|
|
#define BOOT_USB_PIN (BOOT_USB_DM_PIN | BOOT_USB_DP_PIN)
|
|
|
|
void target_led_control(char* c) {
|
|
LL_GPIO_SetOutputPin(LED_RED_PORT, LED_RED_PIN);
|
|
LL_GPIO_SetOutputPin(LED_GREEN_PORT, LED_GREEN_PIN);
|
|
LL_GPIO_SetOutputPin(LED_BLUE_PORT, LED_BLUE_PIN);
|
|
do {
|
|
if(*c == 'R') {
|
|
LL_GPIO_ResetOutputPin(LED_RED_PORT, LED_RED_PIN);
|
|
} else if(*c == 'G') {
|
|
LL_GPIO_ResetOutputPin(LED_GREEN_PORT, LED_GREEN_PIN);
|
|
} else if(*c == 'B') {
|
|
LL_GPIO_ResetOutputPin(LED_BLUE_PORT, LED_BLUE_PIN);
|
|
} else if(*c == '.') {
|
|
LL_mDelay(125);
|
|
LL_GPIO_SetOutputPin(LED_RED_PORT, LED_RED_PIN);
|
|
LL_GPIO_SetOutputPin(LED_GREEN_PORT, LED_GREEN_PIN);
|
|
LL_GPIO_SetOutputPin(LED_BLUE_PORT, LED_BLUE_PIN);
|
|
LL_mDelay(125);
|
|
} else if(*c == '-') {
|
|
LL_mDelay(250);
|
|
LL_GPIO_SetOutputPin(LED_RED_PORT, LED_RED_PIN);
|
|
LL_GPIO_SetOutputPin(LED_GREEN_PORT, LED_GREEN_PIN);
|
|
LL_GPIO_SetOutputPin(LED_BLUE_PORT, LED_BLUE_PIN);
|
|
LL_mDelay(250);
|
|
} else if(*c == '|') {
|
|
LL_GPIO_SetOutputPin(LED_RED_PORT, LED_RED_PIN);
|
|
LL_GPIO_SetOutputPin(LED_GREEN_PORT, LED_GREEN_PIN);
|
|
LL_GPIO_SetOutputPin(LED_BLUE_PORT, LED_BLUE_PIN);
|
|
}
|
|
c++;
|
|
} while(*c != 0);
|
|
}
|
|
|
|
void clock_init() {
|
|
LL_Init1msTick(4000000);
|
|
LL_SetSystemCoreClock(4000000);
|
|
}
|
|
|
|
void gpio_init() {
|
|
LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOA);
|
|
LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOB);
|
|
// USB D+
|
|
LL_GPIO_SetPinMode(BOOT_USB_PORT, BOOT_USB_DP_PIN, LL_GPIO_MODE_OUTPUT);
|
|
LL_GPIO_SetPinSpeed(BOOT_USB_PORT, BOOT_USB_DP_PIN, LL_GPIO_SPEED_FREQ_VERY_HIGH);
|
|
LL_GPIO_SetPinOutputType(BOOT_USB_PORT, BOOT_USB_DP_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
|
|
// USB D-
|
|
LL_GPIO_SetPinMode(BOOT_USB_PORT, BOOT_USB_DM_PIN, LL_GPIO_MODE_OUTPUT);
|
|
LL_GPIO_SetPinSpeed(BOOT_USB_PORT, BOOT_USB_DM_PIN, LL_GPIO_SPEED_FREQ_VERY_HIGH);
|
|
LL_GPIO_SetPinOutputType(BOOT_USB_PORT, BOOT_USB_DM_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
|
|
// Button: back
|
|
LL_GPIO_SetPinMode(BOOT_DFU_PORT, BOOT_DFU_PIN, LL_GPIO_MODE_INPUT);
|
|
LL_GPIO_SetPinPull(BOOT_DFU_PORT, BOOT_DFU_PIN, LL_GPIO_PULL_UP);
|
|
// Display backlight
|
|
LL_GPIO_SetPinMode(BOOT_LCD_BL_PORT, BOOT_LCD_BL_PIN, LL_GPIO_MODE_OUTPUT);
|
|
LL_GPIO_SetPinSpeed(BOOT_LCD_BL_PORT, BOOT_LCD_BL_PIN, LL_GPIO_SPEED_FREQ_LOW);
|
|
LL_GPIO_SetPinOutputType(BOOT_LCD_BL_PORT, BOOT_LCD_BL_PIN, LL_GPIO_OUTPUT_PUSHPULL);
|
|
// LEDs
|
|
LL_GPIO_SetPinMode(LED_RED_PORT, LED_RED_PIN, LL_GPIO_MODE_OUTPUT);
|
|
LL_GPIO_SetPinOutputType(LED_RED_PORT, LED_RED_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
|
|
LL_GPIO_SetPinMode(LED_GREEN_PORT, LED_GREEN_PIN, LL_GPIO_MODE_OUTPUT);
|
|
LL_GPIO_SetPinOutputType(LED_GREEN_PORT, LED_GREEN_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
|
|
LL_GPIO_SetPinMode(LED_BLUE_PORT, LED_BLUE_PIN, LL_GPIO_MODE_OUTPUT);
|
|
LL_GPIO_SetPinOutputType(LED_BLUE_PORT, LED_BLUE_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
|
|
}
|
|
|
|
void rtc_init() {
|
|
// LSE and RTC
|
|
LL_PWR_EnableBkUpAccess();
|
|
if(!LL_RCC_LSE_IsReady()) {
|
|
// Try to start LSE normal way
|
|
LL_RCC_LSE_SetDriveCapability(LL_RCC_LSEDRIVE_MEDIUMLOW);
|
|
LL_RCC_LSE_Enable();
|
|
uint32_t c = 0;
|
|
while(!LL_RCC_LSE_IsReady() && c < 200) {
|
|
LL_mDelay(10);
|
|
c++;
|
|
}
|
|
// Plan B: reset backup domain
|
|
if(!LL_RCC_LSE_IsReady()) {
|
|
target_led_control("-R.R.R.");
|
|
LL_RCC_ForceBackupDomainReset();
|
|
LL_RCC_ReleaseBackupDomainReset();
|
|
NVIC_SystemReset();
|
|
}
|
|
// Set RTC domain clock to LSE
|
|
LL_RCC_SetRTCClockSource(LL_RCC_RTC_CLKSOURCE_LSE);
|
|
}
|
|
// Enable clocking
|
|
LL_RCC_EnableRTC();
|
|
LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_RTCAPB);
|
|
}
|
|
|
|
void lcd_backlight_on() {
|
|
LL_GPIO_SetOutputPin(BOOT_LCD_BL_PORT, BOOT_LCD_BL_PIN);
|
|
}
|
|
|
|
void usb_wire_reset() {
|
|
LL_GPIO_ResetOutputPin(BOOT_USB_PORT, BOOT_USB_PIN);
|
|
LL_mDelay(10);
|
|
LL_GPIO_SetOutputPin(BOOT_USB_PORT, BOOT_USB_PIN);
|
|
}
|
|
|
|
void target_init() {
|
|
clock_init();
|
|
gpio_init();
|
|
rtc_init();
|
|
usb_wire_reset();
|
|
|
|
// Errata 2.2.9, Flash OPTVERR flag is always set after system reset
|
|
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_ALL_ERRORS);
|
|
}
|
|
|
|
int target_is_dfu_requested() {
|
|
if(LL_RTC_BAK_GetRegister(RTC, LL_RTC_BKP_DR0) == BOOT_REQUEST_DFU) {
|
|
LL_RTC_BAK_SetRegister(RTC, LL_RTC_BKP_DR0, BOOT_REQUEST_NONE);
|
|
return 1;
|
|
}
|
|
LL_mDelay(100);
|
|
if(!LL_GPIO_IsInputPinSet(BOOT_DFU_PORT, BOOT_DFU_PIN)) {
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void target_switch(void* offset) {
|
|
asm volatile("ldr r3, [%0] \n"
|
|
"msr msp, r3 \n"
|
|
"ldr r3, [%1] \n"
|
|
"mov pc, r3 \n"
|
|
:
|
|
: "r"(offset), "r"(offset + 0x4)
|
|
: "r3");
|
|
}
|
|
|
|
void target_switch2dfu() {
|
|
target_led_control("B");
|
|
// Remap memory to system bootloader
|
|
LL_SYSCFG_SetRemapMemory(LL_SYSCFG_REMAP_SYSTEMFLASH);
|
|
target_switch(0x0);
|
|
}
|
|
|
|
void target_switch2os() {
|
|
target_led_control("G");
|
|
SCB->VTOR = BOOT_ADDRESS + OS_OFFSET;
|
|
target_switch((void*)(BOOT_ADDRESS + OS_OFFSET));
|
|
}
|