flipperzero-firmware/firmware/targets/f5/api-hal/api-hal-resources.h
あく 5439e232cc
[FL-950] CC1101 Stage1, SPI Refactoring, Drivers layer (#386)
* API HAL SPI: refactoring, split into layers, prepare ST HAL separation. API HAL SubGhz: initialize on start. Drivers: add basic cc1101 driver. Update API usage. Debug: increase max debugger port speed. Remove subghz apps.
* CC1101: chip status handling. ApiHalSpi: increase SubGhz bus speed to 8mhz. F4: backport subghz initialization.
* Api Hal SubGhz: rx path and frequency. CC1101: frequency control.
* SubGhz Application: basic tests
* SubGhz app: tone and packet test. API HAL SUBGHZ: update configs, add missing bits and pieces.
2021-03-31 20:52:26 +03:00

81 lines
1.7 KiB
C

#pragma once
#include "main.h"
#include <furi.h>
#include <stm32wbxx.h>
#include <stm32wbxx_ll_gpio.h>
#ifdef __cplusplus
extern "C" {
#endif
#define POWER_I2C_SCL_Pin LL_GPIO_PIN_9
#define POWER_I2C_SCL_GPIO_Port GPIOA
#define POWER_I2C_SDA_Pin LL_GPIO_PIN_10
#define POWER_I2C_SDA_GPIO_Port GPIOA
#define POWER_I2C I2C1
/** Timing register value is computed with the STM32CubeMX Tool,
* Fast Mode @100kHz with I2CCLK = 64 MHz,
* rise time = 0ns, fall time = 0ns
*/
#define POWER_I2C_TIMINGS 0x10707DBC
/* Input Related Constants */
#define INPUT_DEBOUNCE_TICKS 20
/* Input Keys */
typedef enum {
InputKeyUp,
InputKeyDown,
InputKeyRight,
InputKeyLeft,
InputKeyOk,
InputKeyBack,
} InputKey;
/* Light */
typedef enum {
LightRed,
LightGreen,
LightBlue,
LightBacklight,
} Light;
typedef struct {
const GPIO_TypeDef* port;
const uint16_t pin;
const InputKey key;
const bool inverted;
} InputPin;
extern const InputPin input_pins[];
extern const size_t input_pins_count;
extern const GpioPin vibro_gpio;
extern const GpioPin ibutton_gpio;
extern const GpioPin cc1101_g0_gpio;
extern const GpioPin gpio_subghz_cs;
extern const GpioPin gpio_display_cs;
extern const GpioPin gpio_subghz_cs;
extern const GpioPin gpio_display_cs;
extern const GpioPin gpio_display_rst;
extern const GpioPin gpio_display_di;
extern const GpioPin gpio_sdcard_cs;
extern const GpioPin gpio_nfc_cs;
extern const GpioPin gpio_spi_d_miso;
extern const GpioPin gpio_spi_d_mosi;
extern const GpioPin gpio_spi_d_sck;
extern const GpioPin gpio_spi_r_miso;
extern const GpioPin gpio_spi_r_mosi;
extern const GpioPin gpio_spi_r_sck;
#ifdef __cplusplus
}
#endif