flipperzero-firmware/firmware/targets/api-hal-include/api-hal-power.h
あく 4ae5bd3d75
[FL-944] Preliminary BLE fix: leave PC4 unconfigured. Cleanup code. (#381)
* GPIO: disable CC1101 GD0 pin configuration. API HAL OS: enable sleep. Cleanup interrupts and gpio code.

* API HAL: disable deep sleep, add light sleep, use it instead.
2021-03-19 17:23:53 +03:00

99 lines
2.2 KiB
C

#pragma once
#include <stdint.h>
#include <stdbool.h>
#include <m-string.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ApiHalPowerICCharger,
ApiHalPowerICFuelGauge,
} ApiHalPowerIC;
/* Initialize drivers */
void api_hal_power_init();
/* Get current insomnia level
* @return insomnia level: 0 - no insomnia, >0 - insomnia, bearer count.
*/
uint16_t api_hal_power_insomnia_level();
/* Enter insomnia mode
* Prevents device from going to sleep
* @warning Internally increases insomnia level
* Must be paired with api_hal_power_insomnia_exit
*/
void api_hal_power_insomnia_enter();
/* Exit insomnia mode
* Allow device to go to sleep
* @warning Internally decreases insomnia level.
* Must be paired with api_hal_power_insomnia_enter
*/
void api_hal_power_insomnia_exit();
/* Check if deep sleep availble */
bool api_hal_power_deep_available();
/* Go to sleep */
void api_hal_power_sleep();
/* Get predicted remaining battery capacity in percents */
uint8_t api_hal_power_get_pct();
/* Get battery health state in percents */
uint8_t api_hal_power_get_bat_health_pct();
/* Get charging status */
bool api_hal_power_is_charging();
/* Poweroff system */
void api_hal_power_off();
/* OTG enable */
void api_hal_power_enable_otg();
/* OTG disable */
void api_hal_power_disable_otg();
/* Get remaining battery battery capacity in mAh */
uint32_t api_hal_power_get_battery_remaining_capacity();
/* Get full charge battery capacity in mAh */
uint32_t api_hal_power_get_battery_full_capacity();
/* Get battery voltage in V */
float api_hal_power_get_battery_voltage(ApiHalPowerIC ic);
/* Get battery current in A */
float api_hal_power_get_battery_current(ApiHalPowerIC ic);
/* Get temperature in C */
float api_hal_power_get_battery_temperature(ApiHalPowerIC ic);
/* Get System voltage in V */
float api_hal_power_get_system_voltage();
/* Get USB voltage in V */
float api_hal_power_get_usb_voltage();
/* Get power system component state */
void api_hal_power_dump_state(string_t buffer);
/**
* @brief Enable 3.3v on external gpio and sd card
*/
void api_hal_power_enable_external_3_3v();
/**
* @brief Disable 3.3v on external gpio and sd card
*/
void api_hal_power_disable_external_3_3v();
#ifdef __cplusplus
}
#endif