flipperzero-firmware/lib/ST25RFAL002/include/rfal_t4t.h
あく 389ff92cc1
Naming and coding style convention, new linter tool. (#945)
* Makefile, Scripts: new linter
* About: remove ID from IC
* Firmware: remove double define for DIVC/DIVR
* Scripts: check folder names too. Docker: replace syntax check with make lint.
* Reformat Sources and Migrate to new file naming convention
* Docker: symlink clang-format-12 to clang-format
* Add coding style guide
2022-01-05 19:10:18 +03:00

396 lines
14 KiB
C

/******************************************************************************
* \attention
*
* <h2><center>&copy; COPYRIGHT 2020 STMicroelectronics</center></h2>
*
* Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* www.st.com/myliberty
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
* AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/*
* PROJECT: ST25R391x firmware
* Revision:
* LANGUAGE: ISO C99
*/
/*! \file rfal_t4t.h
*
* \author Gustavo Patricio
*
* \brief Provides convenience methods and definitions for T4T (ISO7816-4)
*
* This module provides an interface to exchange T4T APDUs according to
* NFC Forum T4T and ISO7816-4
*
* This implementation was based on the following specs:
* - ISO/IEC 7816-4 3rd Edition 2013-04-15
* - NFC Forum T4T Technical Specification 1.0 2017-08-28
*
* \addtogroup RFAL
* @{
*
* \addtogroup RFAL-AL
* \brief RFAL Abstraction Layer
* @{
*
* \addtogroup T4T
* \brief RFAL T4T Module
* @{
*
*/
#ifndef RFAL_T4T_H
#define RFAL_T4T_H
/*
******************************************************************************
* INCLUDES
******************************************************************************
*/
#include "platform.h"
#include "st_errno.h"
#include "rfal_rf.h"
#include "rfal_isoDep.h"
/*
******************************************************************************
* GLOBAL DEFINES
******************************************************************************
*/
#define RFAL_T4T_MAX_CAPDU_PROLOGUE_LEN \
4U /*!< Command-APDU prologue length (CLA INS P1 P2) */
#define RFAL_T4T_LE_LEN 1U /*!< Le Expected Response Length (short field coding) */
#define RFAL_T4T_LC_LEN 1U /*!< Lc Data field length (short field coding) */
#define RFAL_T4T_MAX_RAPDU_SW1SW2_LEN \
2U /*!< SW1 SW2 length */
#define RFAL_T4T_CLA 0x00U /*!< Class byte (contains 00h because secure message are not used) */
#define RFAL_T4T_ISO7816_P1_SELECT_BY_DF_NAME \
0x04U /*!< P1 value for Select by name */
#define RFAL_T4T_ISO7816_P1_SELECT_BY_FILEID \
0x00U /*!< P1 value for Select by file identifier */
#define RFAL_T4T_ISO7816_P2_SELECT_FIRST_OR_ONLY_OCCURENCE \
0x00U /*!< b2b1 P2 value for First or only occurence */
#define RFAL_T4T_ISO7816_P2_SELECT_RETURN_FCI_TEMPLATE \
0x00U /*!< b4b3 P2 value for Return FCI template */
#define RFAL_T4T_ISO7816_P2_SELECT_NO_RESPONSE_DATA \
0x0CU /*!< b4b3 P2 value for No responce data */
#define RFAL_T4T_ISO7816_STATUS_COMPLETE \
0x9000U /*!< Command completed \ Normal processing - No further qualification*/
/*
******************************************************************************
* GLOBAL VARIABLES
******************************************************************************
*/
/*
******************************************************************************
* GLOBAL TYPES
******************************************************************************
*/
/*! NFC-A T4T Command-APDU structure */
typedef struct {
uint8_t CLA; /*!< Class byte */
uint8_t INS; /*!< Instruction byte */
uint8_t P1; /*!< Parameter byte 1 */
uint8_t P2; /*!< Parameter byte 2 */
uint8_t Lc; /*!< Data field length */
bool LcFlag; /*!< Lc flag (append Lc when true) */
uint8_t Le; /*!< Expected Response Length */
bool LeFlag; /*!< Le flag (append Le when true) */
rfalIsoDepApduBufFormat* cApduBuf; /*!< Command-APDU buffer (Tx) */
uint16_t* cApduLen; /*!< Command-APDU Length */
} rfalT4tCApduParam;
/*! NFC-A T4T Response-APDU structure */
typedef struct {
rfalIsoDepApduBufFormat* rApduBuf; /*!< Response-APDU buffer (Rx) */
uint16_t rcvdLen; /*!< Full response length */
uint16_t rApduBodyLen; /*!< Response body length */
uint16_t statusWord; /*!< R-APDU Status Word SW1|SW2 */
} rfalT4tRApduParam;
/*! NFC-A T4T command set T4T 1.0 & ISO7816-4 2013 Table 4 */
typedef enum {
RFAL_T4T_INS_SELECT = 0xA4U, /*!< T4T Select */
RFAL_T4T_INS_READBINARY = 0xB0U, /*!< T4T ReadBinary */
RFAL_T4T_INS_UPDATEBINARY = 0xD6U, /*!< T4T UpdateBinay */
RFAL_T4T_INS_READBINARY_ODO = 0xB1U, /*!< T4T ReadBinary using ODO */
RFAL_T4T_INS_UPDATEBINARY_ODO =
0xD7U /*!< T4T UpdateBinay using ODO */
} rfalT4tCmds;
/*
******************************************************************************
* GLOBAL FUNCTION PROTOTYPES
******************************************************************************
*/
/*!
*****************************************************************************
* \brief T4T Compose APDU
*
* This method computes a C-APDU according to NFC Forum T4T and ISO7816-4.
*
* If C-APDU contains data to be sent, it must be placed inside the buffer
* rfalT4tTxRxApduParam.txRx.cApduBuf.apdu and signaled by Lc
*
* To transceive the formed APDU the ISO-DEP layer shall be used
*
* \see rfalIsoDepStartApduTransceive()
* \see rfalIsoDepGetApduTransceiveStatus()
* \see rfalT4TPollerParseRAPDU()
*
* \warning The ISO-DEP module is used to perform the tranceive. Usually
* activation has been done via ISO-DEP activatiavtion. If not
* please call rfalIsoDepInitialize() before.
*
* \param[in,out] apduParam : APDU parameters
* apduParam.cApduLen will contain the APDU length
*
* \return ERR_PARAM : Invalid parameter
* \return ERR_PROTO : Protocol error
* \return ERR_NONE : No error
*****************************************************************************
*/
ReturnCode rfalT4TPollerComposeCAPDU(const rfalT4tCApduParam* apduParam);
/*!
*****************************************************************************
* \brief T4T Parse R-APDU
*
* This method parses a R-APDU according to NFC Forum T4T and ISO7816-4.
* It will extract the data length and check if the Satus word is expected.
*
* \param[in,out] apduParam : APDU parameters
* apduParam.rApduBodyLen will contain the data length
* apduParam.statusWord will contain the SW1 and SW2
*
* \return ERR_REQUEST : Status word (SW1 SW2) different from 9000
* \return ERR_PARAM : Invalid parameter
* \return ERR_PROTO : Protocol error
* \return ERR_NONE : No error
*****************************************************************************
*/
ReturnCode rfalT4TPollerParseRAPDU(rfalT4tRApduParam* apduParam);
/*!
*****************************************************************************
* \brief T4T Compose Select Application APDU
*
* This method computes a Select Application APDU according to NFC Forum T4T
*
* To transceive the formed APDU the ISO-DEP layer shall be used
*
* \see rfalIsoDepStartApduTransceive()
* \see rfalIsoDepGetApduTransceiveStatus()
*
* \param[out] cApduBuf : buffer where the C-APDU will be placed
* \param[in] aid : Application ID to be used
* \param[in] aidLen : Application ID length
* \param[out] cApduLen : Composed C-APDU length
*
* \return ERR_PARAM : Invalid parameter
* \return ERR_PROTO : Protocol error
* \return ERR_NONE : No error
*****************************************************************************
*/
ReturnCode rfalT4TPollerComposeSelectAppl(
rfalIsoDepApduBufFormat* cApduBuf,
const uint8_t* aid,
uint8_t aidLen,
uint16_t* cApduLen);
/*!
*****************************************************************************
* \brief T4T Compose Select File APDU
*
* This method computes a Select File APDU according to NFC Forum T4T
*
* To transceive the formed APDU the ISO-DEP layer shall be used
*
* \see rfalIsoDepStartApduTransceive()
* \see rfalIsoDepGetApduTransceiveStatus()
*
* \param[out] cApduBuf : buffer where the C-APDU will be placed
* \param[in] fid : File ID to be used
* \param[in] fidLen : File ID length
* \param[out] cApduLen : Composed C-APDU length
*
* \return ERR_PARAM : Invalid parameter
* \return ERR_PROTO : Protocol error
* \return ERR_NONE : No error
*****************************************************************************
*/
ReturnCode rfalT4TPollerComposeSelectFile(
rfalIsoDepApduBufFormat* cApduBuf,
const uint8_t* fid,
uint8_t fidLen,
uint16_t* cApduLen);
/*!
*****************************************************************************
* \brief T4T Compose Select File APDU for Mapping Version 1
*
* This method computes a Select File APDU according to NFC Forum T4TOP_v1.0
*
* To transceive the formed APDU the ISO-DEP layer shall be used
*
* \see rfalIsoDepStartApduTransceive()
* \see rfalIsoDepGetApduTransceiveStatus()
*
* \param[out] cApduBuf : buffer where the C-APDU will be placed
* \param[in] fid : File ID to be used
* \param[in] fidLen : File ID length
* \param[out] cApduLen : Composed C-APDU length
*
* \return ERR_PARAM : Invalid parameter
* \return ERR_PROTO : Protocol error
* \return ERR_NONE : No error
*****************************************************************************
*/
ReturnCode rfalT4TPollerComposeSelectFileV1Mapping(
rfalIsoDepApduBufFormat* cApduBuf,
const uint8_t* fid,
uint8_t fidLen,
uint16_t* cApduLen);
/*!
*****************************************************************************
* \brief T4T Compose Read Data APDU
*
* This method computes a Read Data APDU according to NFC Forum T4T
*
* To transceive the formed APDU the ISO-DEP layer shall be used
*
* \see rfalIsoDepStartApduTransceive()
* \see rfalIsoDepGetApduTransceiveStatus()
*
* \param[out] cApduBuf : buffer where the C-APDU will be placed
* \param[in] offset : File offset
* \param[in] expLen : Expected length (Le)
* \param[out] cApduLen : Composed C-APDU length
*
* \return ERR_PARAM : Invalid parameter
* \return ERR_PROTO : Protocol error
* \return ERR_NONE : No error
*****************************************************************************
*/
ReturnCode rfalT4TPollerComposeReadData(
rfalIsoDepApduBufFormat* cApduBuf,
uint16_t offset,
uint8_t expLen,
uint16_t* cApduLen);
/*!
*****************************************************************************
* \brief T4T Compose Read Data ODO APDU
*
* This method computes a Read Data ODO APDU according to NFC Forum T4T
*
* To transceive the formed APDU the ISO-DEP layer shall be used
*
* \see rfalIsoDepStartApduTransceive()
* \see rfalIsoDepGetApduTransceiveStatus()
*
* \param[out] cApduBuf : buffer where the C-APDU will be placed
* \param[in] offset : File offset
* \param[in] expLen : Expected length (Le)
* \param[out] cApduLen : Composed C-APDU length
*
* \return ERR_PARAM : Invalid parameter
* \return ERR_PROTO : Protocol error
* \return ERR_NONE : No error
*****************************************************************************
*/
ReturnCode rfalT4TPollerComposeReadDataODO(
rfalIsoDepApduBufFormat* cApduBuf,
uint32_t offset,
uint8_t expLen,
uint16_t* cApduLen);
/*!
*****************************************************************************
* \brief T4T Compose Write Data APDU
*
* This method computes a Write Data APDU according to NFC Forum T4T
*
* To transceive the formed APDU the ISO-DEP layer shall be used
*
* \see rfalIsoDepStartApduTransceive()
* \see rfalIsoDepGetApduTransceiveStatus()
*
* \param[out] cApduBuf : buffer where the C-APDU will be placed
* \param[in] offset : File offset
* \param[in] data : Data to be written
* \param[in] dataLen : Data length to be written (Lc)
* \param[out] cApduLen : Composed C-APDU length
*
* \return ERR_PARAM : Invalid parameter
* \return ERR_PROTO : Protocol error
* \return ERR_NONE : No error
*****************************************************************************
*/
ReturnCode rfalT4TPollerComposeWriteData(
rfalIsoDepApduBufFormat* cApduBuf,
uint16_t offset,
const uint8_t* data,
uint8_t dataLen,
uint16_t* cApduLen);
/*!
*****************************************************************************
* \brief T4T Compose Write Data ODO APDU
*
* This method computes a Write Data ODO sAPDU according to NFC Forum T4T
*
* To transceive the formed APDU the ISO-DEP layer shall be used
*
* \see rfalIsoDepStartApduTransceive()
* \see rfalIsoDepGetApduTransceiveStatus()
*
* \param[out] cApduBuf : buffer where the C-APDU will be placed
* \param[in] offset : File offset
* \param[in] data : Data to be written
* \param[in] dataLen : Data length to be written (Lc)
* \param[out] cApduLen : Composed C-APDU length
*
* \return ERR_PARAM : Invalid parameter
* \return ERR_PROTO : Protocol error
* \return ERR_NONE : No error
*****************************************************************************
*/
ReturnCode rfalT4TPollerComposeWriteDataODO(
rfalIsoDepApduBufFormat* cApduBuf,
uint32_t offset,
const uint8_t* data,
uint8_t dataLen,
uint16_t* cApduLen);
#endif /* RFAL_T4T_H */
/**
* @}
*
* @}
*
* @}
*/