4d015a1106
* cubewb: updated project to v1.16.0 * hal: updated api_symbols for f18 * FuriHal: add missing enterprise sleep and insomnia * FuriHal: slightly more paranoic sleep mode Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
265 lines
10 KiB
C
265 lines
10 KiB
C
#include "app_common.h"
|
|
#include "app_debug.h"
|
|
#include <interface/patterns/ble_thread/tl/tl.h>
|
|
#include <interface/patterns/ble_thread/tl/mbox_def.h>
|
|
#include <interface/patterns/ble_thread/shci/shci.h>
|
|
#include <utilities/dbg_trace.h>
|
|
#include <utilities/utilities_common.h>
|
|
|
|
#include <furi_hal.h>
|
|
|
|
typedef PACKED_STRUCT {
|
|
GPIO_TypeDef* port;
|
|
uint16_t pin;
|
|
uint8_t enable;
|
|
uint8_t reserved;
|
|
}
|
|
APPD_GpioConfig_t;
|
|
|
|
#define GPIO_NBR_OF_RF_SIGNALS 9
|
|
#define GPIO_CFG_NBR_OF_FEATURES 34
|
|
#define NBR_OF_TRACES_CONFIG_PARAMETERS 4
|
|
#define NBR_OF_GENERAL_CONFIG_PARAMETERS 4
|
|
|
|
/**
|
|
* THIS SHALL BE SET TO A VALUE DIFFERENT FROM 0 ONLY ON REQUEST FROM ST SUPPORT
|
|
*/
|
|
#define BLE_DTB_CFG 0
|
|
// #define BLE_DTB_CFG 7
|
|
#define SYS_DBG_CFG1 (SHCI_C2_DEBUG_OPTIONS_IPCORE_LP | SHCI_C2_DEBUG_OPTIONS_CPU2_STOP_EN)
|
|
|
|
/* Private variables ---------------------------------------------------------*/
|
|
PLACE_IN_SECTION("MB_MEM2")
|
|
ALIGN(4) static SHCI_C2_DEBUG_TracesConfig_t APPD_TracesConfig = {0, 0, 0, 0};
|
|
PLACE_IN_SECTION("MB_MEM2")
|
|
ALIGN(4)
|
|
static SHCI_C2_DEBUG_GeneralConfig_t APPD_GeneralConfig =
|
|
{BLE_DTB_CFG, SYS_DBG_CFG1, {0, 0}, 0, 0, 0, 0, 0};
|
|
|
|
/**
|
|
* THE DEBUG ON GPIO FOR CPU2 IS INTENDED TO BE USED ONLY ON REQUEST FROM ST SUPPORT
|
|
* It provides timing information on the CPU2 activity.
|
|
* All configuration of (port, pin) is supported for each features and can be selected by the user
|
|
* depending on the availability
|
|
*/
|
|
static const APPD_GpioConfig_t aGpioConfigList[GPIO_CFG_NBR_OF_FEATURES] = {
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* BLE_ISR - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_7, 1, 0}, /* BLE_STACK_TICK - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* BLE_CMD_PROCESS - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* BLE_ACL_DATA_PROCESS - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* SYS_CMD_PROCESS - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* RNG_PROCESS - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* NVM_PROCESS - Set on Entry / Reset on Exit */
|
|
{GPIOB, LL_GPIO_PIN_3, 1, 0}, /* IPCC_GENERAL - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_BLE_CMD_RX - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_BLE_EVT_TX - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_BLE_ACL_DATA_RX - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_SYS_CMD_RX - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_SYS_EVT_TX - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_CLI_CMD_RX - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_OT_CMD_RX - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_OT_ACK_TX - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_CLI_ACK_TX - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_MEM_MANAGER_RX - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_TRACES_TX - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_6, 1, 0}, /* HARD_FAULT - Set on Entry / Reset on Exit */
|
|
/* From v1.1.1 */
|
|
{GPIOC, LL_GPIO_PIN_1, 1, 0}, /* IP_CORE_LP_STATUS - Set on Entry / Reset on Exit */
|
|
/* From v1.2.0 */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* END_OF_CONNECTION_EVENT - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* TIMER_SERVER_CALLBACK - Toggle on Entry */
|
|
{GPIOA, LL_GPIO_PIN_4, 1, 0}, /* PES_ACTIVITY - Set on Entry / Reset on Exit */
|
|
{GPIOC, LL_GPIO_PIN_0, 1, 0}, /* MB_BLE_SEND_EVT - Set on Entry / Reset on Exit */
|
|
/* From v1.3.0 */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* BLE_NO_DELAY - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* BLE_STACK_STORE_NVM_CB - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* NVMA_WRITE_ONGOING - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* NVMA_WRITE_COMPLETE - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* NVMA_CLEANUP - Set on Entry / Reset on Exit */
|
|
/* From v1.4.0 */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* NVMA_START - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* FLASH_EOP - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* FLASH_WRITE - Set on Entry / Reset on Exit */
|
|
{GPIOA, LL_GPIO_PIN_0, 0, 0}, /* FLASH_ERASE - Set on Entry / Reset on Exit */
|
|
};
|
|
|
|
/**
|
|
* THE DEBUG ON GPIO FOR CPU2 IS INTENDED TO BE USED ONLY ON REQUEST FROM ST SUPPORT
|
|
* This table is relevant only for BLE
|
|
* It provides timing information on BLE RF activity.
|
|
* New signals may be allocated at any location when requested by ST
|
|
* The GPIO allocated to each signal depend on the BLE_DTB_CFG value and cannot be changed
|
|
*/
|
|
#if(BLE_DTB_CFG == 7)
|
|
static const APPD_GpioConfig_t aRfConfigList[GPIO_NBR_OF_RF_SIGNALS] = {
|
|
{GPIOB, LL_GPIO_PIN_2, 0, 0}, /* DTB10 - Tx/Rx SPI */
|
|
{GPIOB, LL_GPIO_PIN_7, 0, 0}, /* DTB11 - Tx/Tx SPI Clk */
|
|
{GPIOA, LL_GPIO_PIN_8, 0, 0}, /* DTB12 - Tx/Rx Ready & SPI Select */
|
|
{GPIOA, LL_GPIO_PIN_9, 0, 0}, /* DTB13 - Tx/Rx Start */
|
|
{GPIOA, LL_GPIO_PIN_10, 0, 0}, /* DTB14 - FSM0 */
|
|
{GPIOA, LL_GPIO_PIN_11, 0, 0}, /* DTB15 - FSM1 */
|
|
{GPIOB, LL_GPIO_PIN_8, 0, 0}, /* DTB16 - FSM2 */
|
|
{GPIOB, LL_GPIO_PIN_11, 0, 0}, /* DTB17 - FSM3 */
|
|
{GPIOB, LL_GPIO_PIN_10, 0, 0}, /* DTB18 - FSM4 */
|
|
};
|
|
#endif
|
|
|
|
static void APPD_SetCPU2GpioConfig(void);
|
|
static void APPD_BleDtbCfg(void);
|
|
|
|
void APPD_Init() {
|
|
#if(CFG_DEBUG_TRACE != 0)
|
|
DbgTraceInit();
|
|
#endif
|
|
|
|
APPD_SetCPU2GpioConfig();
|
|
APPD_BleDtbCfg();
|
|
}
|
|
|
|
void APPD_EnableCPU2(void) {
|
|
SHCI_C2_DEBUG_Init_Cmd_Packet_t DebugCmdPacket = {
|
|
{{0, 0, 0}}, /**< Does not need to be initialized */
|
|
{(uint8_t*)aGpioConfigList,
|
|
(uint8_t*)&APPD_TracesConfig,
|
|
(uint8_t*)&APPD_GeneralConfig,
|
|
GPIO_CFG_NBR_OF_FEATURES,
|
|
NBR_OF_TRACES_CONFIG_PARAMETERS,
|
|
NBR_OF_GENERAL_CONFIG_PARAMETERS}};
|
|
|
|
/**< Traces channel initialization */
|
|
TL_TRACES_Init();
|
|
|
|
/** GPIO DEBUG Initialization */
|
|
SHCI_C2_DEBUG_Init(&DebugCmdPacket);
|
|
|
|
// We don't need External Power Amplifier
|
|
// LL_GPIO_InitTypeDef gpio_config;
|
|
// gpio_config.Pull = GPIO_NOPULL;
|
|
// gpio_config.Mode = GPIO_MODE_OUTPUT_PP;
|
|
// gpio_config.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
// gpio_config.Pin = LL_GPIO_PIN_3;
|
|
// HAL_GPIO_Init(GPIOC, &gpio_config);
|
|
// SHCI_C2_ExtpaConfig((uint32_t)GPIOC, LL_GPIO_PIN_3, EXT_PA_ENABLED_LOW, EXT_PA_ENABLED);
|
|
|
|
return;
|
|
}
|
|
|
|
static void APPD_SetCPU2GpioConfig(void) {
|
|
LL_GPIO_InitTypeDef gpio_config = {0};
|
|
uint8_t local_loop;
|
|
uint16_t gpioa_pin_list;
|
|
uint16_t gpiob_pin_list;
|
|
uint16_t gpioc_pin_list;
|
|
|
|
gpioa_pin_list = 0;
|
|
gpiob_pin_list = 0;
|
|
gpioc_pin_list = 0;
|
|
|
|
for(local_loop = 0; local_loop < GPIO_CFG_NBR_OF_FEATURES; local_loop++) {
|
|
if(aGpioConfigList[local_loop].enable != 0) {
|
|
switch((uint32_t)aGpioConfigList[local_loop].port) {
|
|
case(uint32_t)GPIOA:
|
|
gpioa_pin_list |= aGpioConfigList[local_loop].pin;
|
|
break;
|
|
|
|
case(uint32_t)GPIOB:
|
|
gpiob_pin_list |= aGpioConfigList[local_loop].pin;
|
|
break;
|
|
|
|
case(uint32_t)GPIOC:
|
|
gpioc_pin_list |= aGpioConfigList[local_loop].pin;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
gpio_config.Mode = LL_GPIO_MODE_OUTPUT;
|
|
gpio_config.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
|
|
gpio_config.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
|
|
gpio_config.Pull = LL_GPIO_PULL_NO;
|
|
|
|
// Never disable SWD, why would you?
|
|
// gpio_config.Pin = LL_GPIO_PIN_15 | LL_GPIO_PIN_14 | LL_GPIO_PIN_13;
|
|
// LL_GPIO_Init(GPIOA, &gpio_config);
|
|
|
|
if(gpioa_pin_list != 0) {
|
|
gpio_config.Pin = gpioa_pin_list;
|
|
LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOA);
|
|
LL_GPIO_Init(GPIOA, &gpio_config);
|
|
LL_GPIO_ResetOutputPin(GPIOA, gpioa_pin_list);
|
|
}
|
|
|
|
if(gpiob_pin_list != 0) {
|
|
gpio_config.Pin = gpiob_pin_list;
|
|
LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOB);
|
|
LL_GPIO_Init(GPIOB, &gpio_config);
|
|
LL_GPIO_ResetOutputPin(GPIOB, gpioa_pin_list);
|
|
}
|
|
|
|
if(gpioc_pin_list != 0) {
|
|
gpio_config.Pin = gpioc_pin_list;
|
|
LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOC);
|
|
LL_GPIO_Init(GPIOC, &gpio_config);
|
|
LL_GPIO_ResetOutputPin(GPIOC, gpioa_pin_list);
|
|
}
|
|
}
|
|
|
|
static void APPD_BleDtbCfg(void) {
|
|
#if(BLE_DTB_CFG != 0)
|
|
LL_GPIO_InitTypeDef gpio_config = {0};
|
|
uint8_t local_loop;
|
|
uint16_t gpioa_pin_list;
|
|
uint16_t gpiob_pin_list;
|
|
|
|
gpioa_pin_list = 0;
|
|
gpiob_pin_list = 0;
|
|
|
|
for(local_loop = 0; local_loop < GPIO_NBR_OF_RF_SIGNALS; local_loop++) {
|
|
if(aRfConfigList[local_loop].enable != 0) {
|
|
switch((uint32_t)aRfConfigList[local_loop].port) {
|
|
case(uint32_t)GPIOA:
|
|
gpioa_pin_list |= aRfConfigList[local_loop].pin;
|
|
break;
|
|
case(uint32_t)GPIOB:
|
|
gpiob_pin_list |= aRfConfigList[local_loop].pin;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
gpio_config.Mode = LL_GPIO_MODE_ALTERNATE;
|
|
gpio_config.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
|
|
gpio_config.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
|
|
gpio_config.Pull = LL_GPIO_PULL_NO;
|
|
gpio_config.Alternate = LL_GPIO_AF_6;
|
|
gpio_config.Pin = LL_GPIO_PIN_15 | LL_GPIO_PIN_14 | LL_GPIO_PIN_13;
|
|
|
|
if(gpioa_pin_list != 0) {
|
|
gpio_config.Pin = gpioa_pin_list;
|
|
LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOA);
|
|
LL_GPIO_Init(GPIOA, &gpio_config);
|
|
}
|
|
|
|
if(gpiob_pin_list != 0) {
|
|
gpio_config.Pin = gpiob_pin_list;
|
|
LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOB);
|
|
LL_GPIO_Init(GPIOB, &gpio_config);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
#if(CFG_DEBUG_TRACE != 0)
|
|
void DbgOutputInit(void) {
|
|
}
|
|
|
|
void DbgOutputTraces(uint8_t* p_data, uint16_t size, void (*cb)(void)) {
|
|
furi_hal_console_tx(p_data, size);
|
|
cb();
|
|
}
|
|
#endif
|