flipperzero-firmware/applications/subghz/subghz_i.c
Skorpionm a8981d317a
[FL-1815, FL-1851, FL-1856] SubGhz: preparation for certification, add deleting stored signals and rename file in SubGHz app (#714)
* [FL-1811] FuriHal: move core2 startup to hal init stage, prevent working with flash controller till core2 startup finish. #704
* SubGhz: fix GO0 low on last hop transmission,  decreased DutyCycle in tests
* SubGhz: test_static fix max 5 sec in transmission mode, DutyCycle <23%
* [FL-1815] SubGhz: prohibiting transmission if it is not within the permitted range for the given region
* SubGhz: fix F7 furi-hal-subghz
* SubGhz: fix logic working tests
* SubGhz: fix princeton encoder for test
* SubGhz: add log princeton encoder
* [FL-1856] Subghz: fix output a double error if the file cannot be opened
* [FL-1851] SubGhz: add deleting Stored Signals in SubGHz App
* SubGhz: add rename file SubGhz app
* SubGhz: update stats message in princeton
* SubGhz: correct spelling
* SubGhz: fix FM config,  add hardware signal processing less than 16 μs,  add added filter for processing short signals
* SubGhz: add Scher-Khan MAGICAR Dinamic protocol
* SubGhz: sync fury targets

Co-authored-by: あく <alleteam@gmail.com>
2021-09-28 03:05:40 +03:00

451 lines
14 KiB
C

#include "subghz_i.h"
#include <math.h>
#include <furi.h>
#include <furi-hal.h>
#include <input/input.h>
#include <gui/elements.h>
#include <notification/notification-messages.h>
#include "file-worker.h"
#include "../notification/notification.h"
#include "views/subghz_receiver.h"
void subghz_begin(SubGhz* subghz, FuriHalSubGhzPreset preset) {
furi_assert(subghz);
furi_hal_subghz_reset();
furi_hal_subghz_idle();
furi_hal_subghz_load_preset(preset);
hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
subghz->txrx->txrx_state = SubGhzTxRxStateIdle;
}
uint32_t subghz_rx(SubGhz* subghz, uint32_t frequency) {
furi_assert(subghz);
if(!furi_hal_subghz_is_frequency_valid(frequency)) {
furi_crash(NULL);
}
furi_assert(
subghz->txrx->txrx_state != SubGhzTxRxStateRx &&
subghz->txrx->txrx_state != SubGhzTxRxStateSleep);
furi_hal_subghz_idle();
uint32_t value = furi_hal_subghz_set_frequency_and_path(frequency);
hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_subghz_flush_rx();
furi_hal_subghz_rx();
furi_hal_subghz_start_async_rx(subghz_worker_rx_callback, subghz->txrx->worker);
subghz_worker_start(subghz->txrx->worker);
subghz->txrx->txrx_state = SubGhzTxRxStateRx;
return value;
}
static bool subghz_tx(SubGhz* subghz, uint32_t frequency) {
furi_assert(subghz);
if(!furi_hal_subghz_is_frequency_valid(frequency)) {
furi_crash(NULL);
}
furi_assert(subghz->txrx->txrx_state != SubGhzTxRxStateSleep);
furi_hal_subghz_idle();
furi_hal_subghz_set_frequency_and_path(frequency);
hal_gpio_init(&gpio_cc1101_g0, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
hal_gpio_write(&gpio_cc1101_g0, true);
bool ret = furi_hal_subghz_tx();
subghz->txrx->txrx_state = SubGhzTxRxStateTx;
return ret;
}
void subghz_idle(SubGhz* subghz) {
furi_assert(subghz);
furi_assert(subghz->txrx->txrx_state != SubGhzTxRxStateSleep);
furi_hal_subghz_idle();
subghz->txrx->txrx_state = SubGhzTxRxStateIdle;
}
void subghz_rx_end(SubGhz* subghz) {
furi_assert(subghz);
furi_assert(subghz->txrx->txrx_state == SubGhzTxRxStateRx);
if(subghz_worker_is_running(subghz->txrx->worker)) {
subghz_worker_stop(subghz->txrx->worker);
furi_hal_subghz_stop_async_rx();
}
furi_hal_subghz_idle();
subghz->txrx->txrx_state = SubGhzTxRxStateIdle;
}
void subghz_sleep(SubGhz* subghz) {
furi_assert(subghz);
furi_hal_subghz_sleep();
subghz->txrx->txrx_state = SubGhzTxRxStateSleep;
}
static void subghz_frequency_preset_to_str(SubGhz* subghz, string_t output) {
furi_assert(subghz);
string_cat_printf(
output,
"Frequency: %d\n"
"Preset: %d\n",
(int)subghz->txrx->frequency,
(int)subghz->txrx->preset);
}
bool subghz_tx_start(SubGhz* subghz) {
furi_assert(subghz);
bool ret = false;
subghz->txrx->encoder = subghz_protocol_encoder_common_alloc();
subghz->txrx->encoder->repeat = 200; //max repeat with the button held down
//get upload
if(subghz->txrx->protocol_result->get_upload_protocol) {
if(subghz->txrx->protocol_result->get_upload_protocol(
subghz->txrx->protocol_result, subghz->txrx->encoder)) {
if(subghz->txrx->preset) {
subghz_begin(subghz, subghz->txrx->preset);
} else {
subghz_begin(subghz, FuriHalSubGhzPresetOok270Async);
}
if(subghz->txrx->frequency) {
ret = subghz_tx(subghz, subghz->txrx->frequency);
} else {
ret = subghz_tx(subghz, 433920000);
}
if(ret) {
//Start TX
furi_hal_subghz_start_async_tx(
subghz_protocol_encoder_common_yield, subghz->txrx->encoder);
}
}
}
if(!ret) {
subghz_protocol_encoder_common_free(subghz->txrx->encoder);
subghz_idle(subghz);
}
return ret;
}
void subghz_tx_stop(SubGhz* subghz) {
furi_assert(subghz);
furi_assert(subghz->txrx->txrx_state == SubGhzTxRxStateTx);
//Stop TX
furi_hal_subghz_stop_async_tx();
subghz_protocol_encoder_common_free(subghz->txrx->encoder);
subghz_idle(subghz);
//if protocol dynamic then we save the last upload
if((subghz->txrx->protocol_result->type_protocol == SubGhzProtocolCommonTypeDynamic) &&
(strcmp(subghz->file_name, ""))) {
subghz_save_protocol_to_file(subghz, subghz->file_name);
}
notification_message(subghz->notifications, &sequence_reset_red);
}
bool subghz_key_load(SubGhz* subghz, const char* file_path) {
furi_assert(subghz);
furi_assert(file_path);
FileWorker* file_worker = file_worker_alloc(false);
// Load device data
bool loaded = false;
string_t path;
string_init_set_str(path, file_path);
string_t temp_str;
string_init(temp_str);
int res = 0;
int data = 0;
do {
if(!file_worker_open(file_worker, string_get_cstr(path), FSAM_READ, FSOM_OPEN_EXISTING)) {
break;
}
// Read and parse frequency from 1st line
if(!file_worker_read_until(file_worker, temp_str, '\n')) {
break;
}
res = sscanf(string_get_cstr(temp_str), "Frequency: %d\n", &data);
if(res != 1) {
break;
}
subghz->txrx->frequency = (uint32_t)data;
// Read and parse preset from 2st line
if(!file_worker_read_until(file_worker, temp_str, '\n')) {
break;
}
res = sscanf(string_get_cstr(temp_str), "Preset: %d\n", &data);
if(res != 1) {
break;
}
subghz->txrx->preset = (FuriHalSubGhzPreset)data;
// Read and parse name protocol from 2st line
if(!file_worker_read_until(file_worker, temp_str, '\n')) {
break;
}
// strlen("Protocol: ") = 10
string_right(temp_str, 10);
subghz->txrx->protocol_result =
subghz_parser_get_by_name(subghz->txrx->parser, string_get_cstr(temp_str));
if(subghz->txrx->protocol_result == NULL) {
break;
}
if(!subghz->txrx->protocol_result->to_load_protocol_from_file(
file_worker, subghz->txrx->protocol_result)) {
break;
}
loaded = true;
} while(0);
if(!loaded) {
file_worker_show_error(file_worker, "Cannot parse\nfile");
}
string_clear(temp_str);
string_clear(path);
file_worker_close(file_worker);
file_worker_free(file_worker);
return loaded;
}
bool subghz_save_protocol_to_file(SubGhz* subghz, const char* dev_name) {
furi_assert(subghz);
furi_assert(subghz->txrx->protocol_result);
FileWorker* file_worker = file_worker_alloc(false);
string_t dev_file_name;
string_init(dev_file_name);
string_t temp_str;
string_init(temp_str);
bool saved = false;
do {
// Create subghz folder directory if necessary
if(!file_worker_mkdir(file_worker, SUBGHZ_APP_FOLDER)) {
break;
}
// Create saved directory if necessary
if(!file_worker_mkdir(file_worker, SUBGHZ_APP_PATH_FOLDER)) {
break;
}
// First remove subghz device file if it was saved
string_printf(
dev_file_name, "%s/%s%s", SUBGHZ_APP_PATH_FOLDER, dev_name, SUBGHZ_APP_EXTENSION);
if(!file_worker_remove(file_worker, string_get_cstr(dev_file_name))) {
break;
}
// Open file
if(!file_worker_open(
file_worker, string_get_cstr(dev_file_name), FSAM_WRITE, FSOM_CREATE_ALWAYS)) {
break;
}
//Get string frequency preset protocol
subghz_frequency_preset_to_str(subghz, temp_str);
if(!file_worker_write(file_worker, string_get_cstr(temp_str), string_size(temp_str))) {
break;
}
//Get string save
subghz->txrx->protocol_result->to_save_string(subghz->txrx->protocol_result, temp_str);
// Prepare and write data to file
if(!file_worker_write(file_worker, string_get_cstr(temp_str), string_size(temp_str))) {
break;
}
saved = true;
} while(0);
string_clear(temp_str);
string_clear(dev_file_name);
file_worker_close(file_worker);
file_worker_free(file_worker);
return saved;
}
bool subghz_load_protocol_from_file(SubGhz* subghz) {
furi_assert(subghz);
FileWorker* file_worker = file_worker_alloc(false);
string_t protocol_file_name;
string_init(protocol_file_name);
string_t temp_str;
string_init(temp_str);
int sscanf_res = 0;
int data = 0;
// Input events and views are managed by file_select
bool res = file_worker_file_select(
file_worker,
SUBGHZ_APP_PATH_FOLDER,
SUBGHZ_APP_EXTENSION,
subghz->file_name,
sizeof(subghz->file_name),
NULL);
if(res) {
// Get key file path
string_printf(
protocol_file_name,
"%s/%s%s",
SUBGHZ_APP_PATH_FOLDER,
subghz->file_name,
SUBGHZ_APP_EXTENSION);
} else {
string_clear(temp_str);
string_clear(protocol_file_name);
file_worker_close(file_worker);
file_worker_free(file_worker);
return res;
}
res = false;
do {
if(!file_worker_open(
file_worker, string_get_cstr(protocol_file_name), FSAM_READ, FSOM_OPEN_EXISTING)) {
return res;
}
// Read and parse frequency from 1st line
if(!file_worker_read_until(file_worker, temp_str, '\n')) {
break;
}
sscanf_res = sscanf(string_get_cstr(temp_str), "Frequency: %d\n", &data);
if(sscanf_res != 1) {
break;
}
subghz->txrx->frequency = (uint32_t)data;
// Read and parse preset from 2st line
if(!file_worker_read_until(file_worker, temp_str, '\n')) {
break;
}
sscanf_res = sscanf(string_get_cstr(temp_str), "Preset: %d\n", &data);
if(sscanf_res != 1) {
break;
}
subghz->txrx->preset = (FuriHalSubGhzPreset)data;
// Read and parse name protocol from 3st line
if(!file_worker_read_until(file_worker, temp_str, '\n')) {
break;
}
// strlen("Protocol: ") = 10
string_right(temp_str, 10);
subghz->txrx->protocol_result =
subghz_parser_get_by_name(subghz->txrx->parser, string_get_cstr(temp_str));
if(subghz->txrx->protocol_result == NULL) {
break;
}
if(!subghz->txrx->protocol_result->to_load_protocol_from_file(
file_worker, subghz->txrx->protocol_result)) {
break;
}
res = true;
} while(0);
if(!res) {
file_worker_show_error(file_worker, "Cannot parse\nfile");
}
string_clear(temp_str);
string_clear(protocol_file_name);
file_worker_close(file_worker);
file_worker_free(file_worker);
return res;
}
bool subghz_delete_file(SubGhz* subghz) {
furi_assert(subghz);
bool result = true;
FileWorker* file_worker = file_worker_alloc(false);
string_t file_path;
do {
// Get key file path
string_init_printf(
file_path,
"%s/%s%s",
SUBGHZ_APP_PATH_FOLDER,
subghz->file_name_tmp,
SUBGHZ_APP_EXTENSION);
// Delete original file
if(!file_worker_remove(file_worker, string_get_cstr(file_path))) {
result = false;
break;
}
} while(0);
string_clear(file_path);
file_worker_close(file_worker);
file_worker_free(file_worker);
return result;
}
void subghz_file_name_clear(SubGhz* subghz) {
furi_assert(subghz);
memset(subghz->file_name, 0, sizeof(subghz->file_name));
memset(subghz->file_name_tmp, 0, sizeof(subghz->file_name_tmp));
}
uint32_t subghz_random_serial(void) {
static bool rand_generator_inited = false;
if(!rand_generator_inited) {
srand(DWT->CYCCNT);
rand_generator_inited = true;
}
return (uint32_t)rand();
}
void subghz_hopper_update(SubGhz* subghz) {
furi_assert(subghz);
switch(subghz->txrx->hopper_state) {
case SubGhzHopperStateOFF:
return;
break;
case SubGhzHopperStatePause:
return;
break;
case SubGhzHopperStateRSSITimeOut:
if(subghz->txrx->hopper_timeout != 0) {
subghz->txrx->hopper_timeout--;
return;
}
break;
default:
break;
}
float rssi = -127.0f;
if(subghz->txrx->hopper_state != SubGhzHopperStateRSSITimeOut) {
// See RSSI Calculation timings in CC1101 17.3 RSSI
rssi = furi_hal_subghz_get_rssi();
// Stay if RSSI is high enough
if(rssi > -90.0f) {
subghz->txrx->hopper_timeout = 10;
subghz->txrx->hopper_state = SubGhzHopperStateRSSITimeOut;
return;
}
} else {
subghz->txrx->hopper_state = SubGhzHopperStateRunnig;
}
// Select next frequency
if(subghz->txrx->hopper_idx_frequency < subghz_hopper_frequencies_count - 1) {
subghz->txrx->hopper_idx_frequency++;
} else {
subghz->txrx->hopper_idx_frequency = 0;
}
if(subghz->txrx->txrx_state == SubGhzTxRxStateRx) {
subghz_rx_end(subghz);
};
if(subghz->txrx->txrx_state == SubGhzTxRxStateIdle) {
subghz_parser_reset(subghz->txrx->parser);
subghz->txrx->frequency = subghz_hopper_frequencies[subghz->txrx->hopper_idx_frequency];
subghz_rx(subghz, subghz->txrx->frequency);
}
}