flipperzero-firmware/firmware/targets/f6/api-hal/api-hal-spi-config.c
あく 734820c137
[FL-1196] Targets: add F6 (#427)
* Targets: add F6
* F6: Update linker script for use with internal storage
* F6: synchronize with F5, add all changes arriving in V9 board, update cube project. Github workflow: add multi-target build, add F6 to build targets.
* CI: fix full assembly
* CI: better artifact naming scheme
* CI: fix artifacts wildcard
* F6: Swap C10 - A15, vibro and sdcard detect pins
2021-05-18 12:23:14 +03:00

123 lines
3.7 KiB
C

#include <api-hal-spi-config.h>
#include <api-hal-resources.h>
extern SPI_HandleTypeDef SPI_R;
extern SPI_HandleTypeDef SPI_D;
const SPI_InitTypeDef api_hal_spi_config_nfc = {
.Mode = SPI_MODE_MASTER,
.Direction = SPI_DIRECTION_2LINES,
.DataSize = SPI_DATASIZE_8BIT,
.CLKPolarity = SPI_POLARITY_LOW,
.CLKPhase = SPI_PHASE_2EDGE,
.NSS = SPI_NSS_SOFT,
.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8,
.FirstBit = SPI_FIRSTBIT_MSB,
.TIMode = SPI_TIMODE_DISABLE,
.CRCCalculation = SPI_CRCCALCULATION_DISABLE,
.CRCPolynomial = 7,
.CRCLength = SPI_CRC_LENGTH_DATASIZE,
.NSSPMode = SPI_NSS_PULSE_DISABLE,
};
const SPI_InitTypeDef api_hal_spi_config_subghz = {
.Mode = SPI_MODE_MASTER,
.Direction = SPI_DIRECTION_2LINES,
.DataSize = SPI_DATASIZE_8BIT,
.CLKPolarity = SPI_POLARITY_LOW,
.CLKPhase = SPI_PHASE_1EDGE,
.NSS = SPI_NSS_SOFT,
.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8,
.FirstBit = SPI_FIRSTBIT_MSB,
.TIMode = SPI_TIMODE_DISABLE,
.CRCCalculation = SPI_CRCCALCULATION_DISABLE,
.CRCPolynomial = 7,
.CRCLength = SPI_CRC_LENGTH_DATASIZE,
.NSSPMode = SPI_NSS_PULSE_DISABLE,
};
const SPI_InitTypeDef api_hal_spi_config_display = {
.Mode = SPI_MODE_MASTER,
.Direction = SPI_DIRECTION_2LINES,
.DataSize = SPI_DATASIZE_8BIT,
.CLKPolarity = SPI_POLARITY_LOW,
.CLKPhase = SPI_PHASE_1EDGE,
.NSS = SPI_NSS_SOFT,
.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16,
.FirstBit = SPI_FIRSTBIT_MSB,
.TIMode = SPI_TIMODE_DISABLE,
.CRCCalculation = SPI_CRCCALCULATION_DISABLE,
.CRCPolynomial = 7,
.CRCLength = SPI_CRC_LENGTH_DATASIZE,
.NSSPMode = SPI_NSS_PULSE_ENABLE,
};
osMutexId_t spi_mutex_d = NULL;
osMutexId_t spi_mutex_r = NULL;
const ApiHalSpiBus spi_r = {
.spi=&SPI_R,
.mutex=&spi_mutex_r,
.miso=&gpio_spi_r_miso,
.mosi=&gpio_spi_r_mosi,
.clk=&gpio_spi_r_sck,
};
const ApiHalSpiBus spi_d = {
.spi=&SPI_D,
.mutex=&spi_mutex_d,
.miso=&gpio_spi_d_miso,
.mosi=&gpio_spi_d_mosi,
.clk=&gpio_spi_d_sck,
};
const ApiHalSpiDevice api_hal_spi_devices[ApiHalSpiDeviceIdMax] = {
{ .bus=&spi_r, .config=&api_hal_spi_config_subghz, .chip_select=&gpio_subghz_cs, },
{ .bus=&spi_d, .config=&api_hal_spi_config_display, .chip_select=&gpio_display_cs, },
{ .bus=&spi_d, .config=NULL, .chip_select=&gpio_sdcard_cs, },
{ .bus=&spi_r, .config=&api_hal_spi_config_nfc, .chip_select=&gpio_nfc_cs },
};
/**
* SD Card in fast mode (after init)
*/
const SPIDevice sd_fast_spi = {
.bus= &spi_d,
.config = {
.Mode = SPI_MODE_MASTER,
.Direction = SPI_DIRECTION_2LINES,
.DataSize = SPI_DATASIZE_8BIT,
.CLKPolarity = SPI_POLARITY_LOW,
.CLKPhase = SPI_PHASE_1EDGE,
.NSS = SPI_NSS_SOFT,
.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2,
.FirstBit = SPI_FIRSTBIT_MSB,
.TIMode = SPI_TIMODE_DISABLE,
.CRCCalculation = SPI_CRCCALCULATION_DISABLE,
.CRCPolynomial = 7,
.CRCLength = SPI_CRC_LENGTH_DATASIZE,
.NSSPMode = SPI_NSS_PULSE_ENABLE,
}};
/**
* SD Card in slow mode (before init)
*/
const SPIDevice sd_slow_spi = {
.bus= &spi_d,
.config = {
.Mode = SPI_MODE_MASTER,
.Direction = SPI_DIRECTION_2LINES,
.DataSize = SPI_DATASIZE_8BIT,
.CLKPolarity = SPI_POLARITY_LOW,
.CLKPhase = SPI_PHASE_1EDGE,
.NSS = SPI_NSS_SOFT,
.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_32,
.FirstBit = SPI_FIRSTBIT_MSB,
.TIMode = SPI_TIMODE_DISABLE,
.CRCCalculation = SPI_CRCCALCULATION_DISABLE,
.CRCPolynomial = 7,
.CRCLength = SPI_CRC_LENGTH_DATASIZE,
.NSSPMode = SPI_NSS_PULSE_ENABLE,
}};