flipperzero-firmware/bootloader
Nikolay Minaylov 2f3ea9494e
HAL to LL migration: GPIO, HSEM, AES (#1069)
* gpio, hsem, crypto: switch from HAL to LL/registers
* Moved GPIO initialization to furi_hal
* More HAL removed
* All HAL modules disabled
* HAL is finally removed
* hal_gpio -> furi_hal_gpio, main.h removed
* Bootloader build fix
* RTOS config moved to freertos-glue
* delay -> furi_hal_delay

Co-authored-by: あく <alleteam@gmail.com>
2022-03-30 18:23:40 +03:00
..
src Implement bootloader #137 (#142) 2020-10-01 02:05:04 +03:00
targets HAL to LL migration: GPIO, HSEM, AES (#1069) 2022-03-30 18:23:40 +03:00
Makefile [FL-2230] SubGhz: protocol API refactoring (#969) 2022-03-03 12:48:56 +03:00
ReadMe.md Fix typos (#857) 2021-12-01 02:53:53 +03:00

Flipper bootloader

What it does?

  • Hardware initialization
  • Boot process LED indicators
  • Firmware update
  • Errata crutches
  • Recovery mode

Targets

| Name | Bootloader | Firmware | Reset | DFU | | | Address | Address | Combo | Combo |

| f7 | 0x08000000 | 0x00008000 | L+Back | L+Back, hold L |

Also there is a ST bootloader combo available on empty device: L+Ok+Back, release Back,Left. Target independent code and headers in src and target/include folders.

Building

With dev docker image:

docker-compose exec dev make -C bootloader

With toolchain installed in path:

make -C bootloader

Build Options

  • DEBUG - 0/1 - enable or disable debug build. Default is 1.
  • TARGET - string - target to build. Default is f4.

Flashing

Using SWD (STLink):

make -C bootloader flash

Or use DFU (USB):

make -C bootloader upload

Debug

Using SWD (STLink):

make -C bootloader debug