flipperzero-firmware/firmware/targets/f7/ble_glue/hw_if.h
あく 389ff92cc1
Naming and coding style convention, new linter tool. (#945)
* Makefile, Scripts: new linter
* About: remove ID from IC
* Firmware: remove double define for DIVC/DIVR
* Scripts: check folder names too. Docker: replace syntax check with make lint.
* Reformat Sources and Migrate to new file naming convention
* Docker: symlink clang-format-12 to clang-format
* Add coding style guide
2022-01-05 19:10:18 +03:00

103 lines
2.8 KiB
C

/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file hw_if.h
* @author MCD Application Team
* @brief Hardware Interface
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef HW_IF_H
#define HW_IF_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32wbxx.h"
#include "stm32wbxx_ll_exti.h"
#include "stm32wbxx_ll_system.h"
#include "stm32wbxx_ll_rcc.h"
#include "stm32wbxx_ll_ipcc.h"
#include "stm32wbxx_ll_bus.h"
#include "stm32wbxx_ll_pwr.h"
#include "stm32wbxx_ll_cortex.h"
#include "stm32wbxx_ll_utils.h"
#include "stm32wbxx_ll_hsem.h"
#include "stm32wbxx_ll_gpio.h"
#include "stm32wbxx_ll_rtc.h"
#ifdef USE_STM32WBXX_USB_DONGLE
#include "stm32wbxx_usb_dongle.h"
#endif
#ifdef USE_STM32WBXX_NUCLEO
#include "stm32wbxx_nucleo.h"
#endif
#ifdef USE_X_NUCLEO_EPD
#include "x_nucleo_epd.h"
#endif
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/******************************************************************************
* HW UART
******************************************************************************/
typedef enum {
hw_uart1,
hw_uart2,
hw_lpuart1,
} hw_uart_id_t;
typedef enum {
hw_uart_ok,
hw_uart_error,
hw_uart_busy,
hw_uart_to,
} hw_status_t;
void HW_UART_Init(hw_uart_id_t hw_uart_id);
void HW_UART_Receive_IT(
hw_uart_id_t hw_uart_id,
uint8_t* pData,
uint16_t Size,
void (*Callback)(void));
void HW_UART_Transmit_IT(
hw_uart_id_t hw_uart_id,
uint8_t* pData,
uint16_t Size,
void (*Callback)(void));
hw_status_t
HW_UART_Transmit(hw_uart_id_t hw_uart_id, uint8_t* p_data, uint16_t size, uint32_t timeout);
hw_status_t HW_UART_Transmit_DMA(
hw_uart_id_t hw_uart_id,
uint8_t* p_data,
uint16_t size,
void (*Callback)(void));
void HW_UART_Interrupt_Handler(hw_uart_id_t hw_uart_id);
void HW_UART_DMA_Interrupt_Handler(hw_uart_id_t hw_uart_id);
#ifdef __cplusplus
}
#endif
#endif /*HW_IF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/