flipperzero-firmware/firmware/targets/f6/api-hal/api-hal-nfc.c
gornekich 3a2121bbb8
[FL-1424] NFC emulate CLI command (#514)
* nfc: move cli commands to separate file
* nfc: add nfc_emulate CLI command
* nfc: rework nfc emulate call from gui
* nfc: deactivate nfc state machine when exiting worker

Co-authored-by: あく <alleteam@gmail.com>
2021-06-10 15:01:48 +03:00

181 lines
5.0 KiB
C

#include "api-hal-nfc.h"
#include <st25r3916.h>
static bool dev_is_found = false;
const uint32_t clocks_in_ms = 64 * 1000;
ReturnCode api_hal_nfc_init() {
// Check if Nfc worker was started
if(rfalNfcGetState() > RFAL_NFC_STATE_NOTINIT) {
return ERR_NONE;
}
return rfalNfcInitialize();
}
bool api_hal_nfc_is_busy() {
return rfalNfcGetState() > RFAL_NFC_STATE_IDLE;
}
void api_hal_nfc_field_on() {
api_hal_nfc_exit_sleep();
st25r3916TxRxOn();
}
void api_hal_nfc_field_off() {
st25r3916TxRxOff();
api_hal_nfc_start_sleep();
}
void api_hal_nfc_start_sleep() {
rfalLowPowerModeStart();
}
void api_hal_nfc_exit_sleep() {
rfalLowPowerModeStop();
}
static void api_hal_nfc_change_state_cb(rfalNfcState st) {
FURI_LOG_D("HAL NFC", "NFC worker state: %d", st);
if(st >= RFAL_NFC_STATE_POLL_SELECT) {
dev_is_found = true;
}
}
bool api_hal_nfc_detect(rfalNfcDevice **dev_list, uint8_t* dev_cnt, uint32_t cycles, bool deactivate) {
furi_assert(dev_list);
furi_assert(dev_cnt);
rfalLowPowerModeStop();
if(rfalNfcGetState() == RFAL_NFC_STATE_NOTINIT) {
rfalNfcInitialize();
}
rfalNfcDiscoverParam params;
params.compMode = RFAL_COMPLIANCE_MODE_EMV;
params.techs2Find = RFAL_NFC_POLL_TECH_A | RFAL_NFC_POLL_TECH_B | RFAL_NFC_POLL_TECH_F |
RFAL_NFC_POLL_TECH_V | RFAL_NFC_POLL_TECH_AP2P | RFAL_NFC_POLL_TECH_ST25TB;
params.totalDuration = 1000;
params.devLimit = 3;
params.wakeupEnabled = false;
params.wakeupConfigDefault = true;
params.nfcfBR = RFAL_BR_212;
params.ap2pBR = RFAL_BR_424;
params.maxBR = RFAL_BR_KEEP;
params.GBLen = RFAL_NFCDEP_GB_MAX_LEN;
params.notifyCb = api_hal_nfc_change_state_cb;
dev_is_found = false;
rfalNfcDiscover(&params);
while(--cycles) {
rfalNfcWorker();
FURI_LOG_D("HAL NFC", "Current state %d", rfalNfcGetState());
if(dev_is_found) {
rfalNfcGetDevicesFound(dev_list, dev_cnt);
FURI_LOG_D("HAL NFC", "Found %d devices", dev_cnt);
break;
}
osDelay(10);
}
if(deactivate) {
rfalNfcDeactivate(false);
rfalLowPowerModeStart();
}
if(!cycles) {
FURI_LOG_D("HAL NFC", "Timeout");
return false;
}
return true;
}
bool api_hal_nfc_listen(uint32_t timeout) {
api_hal_nfc_exit_sleep();
rfalNfcState state = rfalNfcGetState();
if(state == RFAL_NFC_STATE_NOTINIT) {
rfalNfcInitialize();
} else if(state >= RFAL_NFC_STATE_ACTIVATED) {
rfalNfcDeactivate(false);
}
rfalNfcDiscoverParam params;
params.compMode = RFAL_COMPLIANCE_MODE_EMV;
params.techs2Find = RFAL_NFC_LISTEN_TECH_A;
params.totalDuration = 1000;
params.devLimit = 1;
params.wakeupEnabled = false;
params.wakeupConfigDefault = true;
params.nfcfBR = RFAL_BR_212;
params.ap2pBR = RFAL_BR_424;
params.maxBR = RFAL_BR_KEEP;
params.GBLen = RFAL_NFCDEP_GB_MAX_LEN;
params.notifyCb = NULL;
params.lmConfigPA.nfcidLen = RFAL_LM_NFCID_LEN_04;
params.lmConfigPA.nfcid[0] = 0XCF;
params.lmConfigPA.nfcid[1] = 0x72;
params.lmConfigPA.nfcid[2] = 0xD4;
params.lmConfigPA.nfcid[3] = 0x40;
params.lmConfigPA.SENS_RES[0] = 0x04;
params.lmConfigPA.SENS_RES[1] = 0x00;
params.lmConfigPA.SEL_RES = 0x20;
uint32_t start = DWT->CYCCNT;
rfalNfcDiscover(&params);
while(state != RFAL_NFC_STATE_ACTIVATED) {
rfalNfcWorker();
state = rfalNfcGetState();
FURI_LOG_D("HAL NFC", "Current state %d", state);
if(DWT->CYCCNT - start > timeout * clocks_in_ms) {
rfalNfcDeactivate(true);
return false;
}
if(state == RFAL_NFC_STATE_LISTEN_ACTIVATION) {
start = DWT->CYCCNT;
continue;
}
taskYIELD();
}
return true;
}
ReturnCode api_hal_nfc_data_exchange(uint8_t* tx_buff, uint16_t tx_len, uint8_t** rx_buff, uint16_t** rx_len, bool deactivate) {
furi_assert(rx_buff);
furi_assert(rx_len);
ReturnCode ret;
rfalNfcState state = RFAL_NFC_STATE_ACTIVATED;
ret = rfalNfcDataExchangeStart(tx_buff, tx_len, rx_buff, rx_len, 0);
if(ret != ERR_NONE) {
return ret;
}
uint32_t start = DWT->CYCCNT;
while(state != RFAL_NFC_STATE_DATAEXCHANGE_DONE) {
rfalNfcWorker();
state = rfalNfcGetState();
ret = rfalNfcDataExchangeGetStatus();
FURI_LOG_D("HAL NFC", "Nfc st: %d Data st: %d", state, ret);
if(ret > ERR_SLEEP_REQ) {
return ret;
}
if(ret == ERR_BUSY) {
if(DWT->CYCCNT - start > 1000 * clocks_in_ms) {
return ERR_TIMEOUT;
}
continue;
} else {
start = DWT->CYCCNT;
}
taskYIELD();
}
if(deactivate) {
rfalNfcDeactivate(false);
rfalLowPowerModeStart();
}
return ERR_NONE;
}
void api_hal_nfc_deactivate() {
rfalNfcDeactivate(false);
rfalLowPowerModeStart();
}