flipperzero-firmware/firmware/targets/furi-hal-include/furi-hal-power.h
2021-08-08 21:03:25 +03:00

105 lines
2.4 KiB
C

#pragma once
#include <stdint.h>
#include <stdbool.h>
#include <m-string.h>
#ifdef __cplusplus
extern "C" {
#endif
/** Power IC type */
typedef enum {
FuriHalPowerICCharger,
FuriHalPowerICFuelGauge,
} FuriHalPowerIC;
/** Initialize drivers */
void furi_hal_power_init();
/**
* Get current insomnia level
* @return insomnia level: 0 - no insomnia, >0 - insomnia, bearer count.
*/
uint16_t furi_hal_power_insomnia_level();
/**
* Enter insomnia mode
* Prevents device from going to sleep
* @warning Internally increases insomnia level
* Must be paired with furi_hal_power_insomnia_exit
*/
void furi_hal_power_insomnia_enter();
/**
* Exit insomnia mode
* Allow device to go to sleep
* @warning Internally decreases insomnia level.
* Must be paired with furi_hal_power_insomnia_enter
*/
void furi_hal_power_insomnia_exit();
/** Check if sleep availble */
bool furi_hal_power_sleep_available();
/** Check if deep sleep availble */
bool furi_hal_power_deep_sleep_available();
/** Go to sleep */
void furi_hal_power_sleep();
/** Get predicted remaining battery capacity in percents */
uint8_t furi_hal_power_get_pct();
/** Get battery health state in percents */
uint8_t furi_hal_power_get_bat_health_pct();
/** Get charging status */
bool furi_hal_power_is_charging();
/** Poweroff device */
void furi_hal_power_off();
/** Reset device */
void furi_hal_power_reset();
/** OTG enable */
void furi_hal_power_enable_otg();
/** OTG disable */
void furi_hal_power_disable_otg();
/** Get remaining battery battery capacity in mAh */
uint32_t furi_hal_power_get_battery_remaining_capacity();
/** Get full charge battery capacity in mAh */
uint32_t furi_hal_power_get_battery_full_capacity();
/** Get battery voltage in V */
float furi_hal_power_get_battery_voltage(FuriHalPowerIC ic);
/** Get battery current in A */
float furi_hal_power_get_battery_current(FuriHalPowerIC ic);
/** Get temperature in C */
float furi_hal_power_get_battery_temperature(FuriHalPowerIC ic);
/** Get System voltage in V */
float furi_hal_power_get_system_voltage();
/** Get USB voltage in V */
float furi_hal_power_get_usb_voltage();
/** Get power system component state */
void furi_hal_power_dump_state();
/** Enable 3.3v on external gpio and sd card */
void furi_hal_power_enable_external_3_3v();
/** Disable 3.3v on external gpio and sd card */
void furi_hal_power_disable_external_3_3v();
#ifdef __cplusplus
}
#endif