flipperzero-firmware/firmware/targets/f7/furi_hal/furi_hal_os_timer.h
あく 389ff92cc1
Naming and coding style convention, new linter tool. (#945)
* Makefile, Scripts: new linter
* About: remove ID from IC
* Firmware: remove double define for DIVC/DIVR
* Scripts: check folder names too. Docker: replace syntax check with make lint.
* Reformat Sources and Migrate to new file naming convention
* Docker: symlink clang-format-12 to clang-format
* Add coding style guide
2022-01-05 19:10:18 +03:00

70 lines
2.2 KiB
C

#pragma once
#include <stm32wbxx_ll_lptim.h>
#include <stm32wbxx_ll_bus.h>
#include <stdint.h>
// Timer used for system ticks
#define FURI_HAL_OS_TIMER_MAX 0xFFFF
#define FURI_HAL_OS_TIMER_REG_LOAD_DLY 0x1
#define FURI_HAL_OS_TIMER LPTIM2
#define FURI_HAL_OS_TIMER_IRQ LPTIM2_IRQn
static inline void furi_hal_os_timer_init() {
// Configure clock source
LL_RCC_SetLPTIMClockSource(LL_RCC_LPTIM2_CLKSOURCE_LSE);
LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_LPTIM2);
// Set interrupt priority and enable them
NVIC_SetPriority(
FURI_HAL_OS_TIMER_IRQ, NVIC_EncodePriority(NVIC_GetPriorityGrouping(), 15, 0));
NVIC_EnableIRQ(FURI_HAL_OS_TIMER_IRQ);
}
static inline void furi_hal_os_timer_continuous(uint32_t count) {
count--;
// Enable timer
LL_LPTIM_Enable(FURI_HAL_OS_TIMER);
while(!LL_LPTIM_IsEnabled(FURI_HAL_OS_TIMER))
;
// Enable rutoreload match interrupt
LL_LPTIM_EnableIT_ARRM(FURI_HAL_OS_TIMER);
// Set autoreload and start counter
LL_LPTIM_SetAutoReload(FURI_HAL_OS_TIMER, count);
LL_LPTIM_StartCounter(FURI_HAL_OS_TIMER, LL_LPTIM_OPERATING_MODE_CONTINUOUS);
}
static inline void furi_hal_os_timer_single(uint32_t count) {
count--;
// Enable timer
LL_LPTIM_Enable(FURI_HAL_OS_TIMER);
while(!LL_LPTIM_IsEnabled(FURI_HAL_OS_TIMER))
;
// Enable compare match interrupt
LL_LPTIM_EnableIT_CMPM(FURI_HAL_OS_TIMER);
// Set compare, autoreload and start counter
// Include some marging to workaround ARRM behaviour
LL_LPTIM_SetCompare(FURI_HAL_OS_TIMER, count - 3);
LL_LPTIM_SetAutoReload(FURI_HAL_OS_TIMER, count);
LL_LPTIM_StartCounter(FURI_HAL_OS_TIMER, LL_LPTIM_OPERATING_MODE_ONESHOT);
}
static inline void furi_hal_os_timer_reset() {
// Hard reset timer
// THE ONLY RELIABLEWAY to stop it according to errata
LL_LPTIM_DeInit(FURI_HAL_OS_TIMER);
}
static inline uint32_t furi_hal_os_timer_get_cnt() {
uint32_t counter = LL_LPTIM_GetCounter(FURI_HAL_OS_TIMER);
uint32_t counter_shadow = LL_LPTIM_GetCounter(FURI_HAL_OS_TIMER);
while(counter != counter_shadow) {
counter = counter_shadow;
counter_shadow = LL_LPTIM_GetCounter(FURI_HAL_OS_TIMER);
}
return counter;
}