flipperzero-firmware/scripts
hedger 1ef70c0bb4
[FL-3280] cubewb: downgraded to v1.15.0 (#2605)
* cubewb: downgraded to v1.15.0
* hal: updated f18 symbols to match LL
* hal: flash: use furi_hal_cortex_timer for timeouts
* scripts: fixed cube version validation from config file
* hal: flash: added 3 seconds timeout when waiting for C2 to unlock flash controller. On timeout, triggers furi_check
* nfc: fixed missing interrupt setup on multiple platformSetIrqCallback() invocations
* hal: gpio: don't trigger furi_check on furi_hal_gpio_add_int_callback() with same parameters
* Reverted NFC fixes - will be in a separate PR
* scripts: storage: fixed exception handler for paths
2023-04-24 16:19:36 +09:00
..
fbt [FL-3097] fbt, faploader: minimal app module implementation (#2420) 2023-03-14 23:29:28 +09:00
fbt_tools [FL-3280] cubewb: downgraded to v1.15.0 (#2605) 2023-04-24 16:19:36 +09:00
flipper [FL-3280] cubewb: downgraded to v1.15.0 (#2605) 2023-04-24 16:19:36 +09:00
testing Splitting units and updater benches (#2165) 2022-12-28 23:16:06 +09:00
toolchain [FL-3162] Moved ufbt to fbt codebase (#2520) 2023-04-06 10:44:37 +08:00
ufbt [FL-3243] github: testing SDK with ufbt action (#2581) 2023-04-19 20:08:13 +09:00
assets.py [FL-2859,2838] fbt: improvements for FAPs (#1813) 2022-10-06 22:55:57 +09:00
bin2dfu.py [FL-2052] New build system based on scons (#1269) 2022-06-26 21:00:03 +09:00
distfap.py [FL-3097] fbt, faploader: minimal app module implementation (#2420) 2023-03-14 23:29:28 +09:00
flash.py [FL-2269] Core2 OTA (#1144) 2022-04-27 18:53:48 +03:00
fwsize.py fbt fixes pt4 (#1899) 2022-10-26 07:15:02 +09:00
get_env.py [FL-3232] FuriHal: fix gpio naming and add explicit pulls for vibro, speaker and ir_tx (#2565) 2023-04-06 19:06:19 +10:00
guruguru.py [FL-2832] fbt: more fixes & improvements (#1854) 2022-10-13 01:12:05 +09:00
lint.py fbt: lint fixes (#2008) 2022-11-12 19:03:22 +09:00
merge_report_qa.py Migrating CI/CD to Linode S3 (#2380) 2023-02-09 19:42:41 +09:00
meta.py CI: Remove pycache from artifacts (#858) 2021-12-01 13:21:26 +03:00
ob_custradio.data [FL-2580] FuriHal: add more supported radio stacks (#1301) 2022-06-09 18:07:42 +09:00
ob.data [FL-3271] cubewb: updated to v1.16.0 (#2595) 2023-04-20 21:57:51 +09:00
ob.py OpenOCD scripts (#2101) 2022-12-27 21:59:36 +09:00
otp.py [FL-3180] OTP programmer: return exit code based on error type (#2504) 2023-03-20 21:07:17 +09:00
power.py Splitting units and updater benches (#2165) 2022-12-28 23:16:06 +09:00
program.py Script that can find programmer and flash firmware via it. (#2193) 2023-02-06 23:56:36 +09:00
ReadMe.md Fixing various typos in readme files #2208 2022-12-28 23:30:20 +09:00
runfap.py [FL-3097] fbt, faploader: minimal app module implementation (#2420) 2023-03-14 23:29:28 +09:00
sconsdist.py ufbt: project & debugging updates (#2572) 2023-04-11 00:46:22 +10:00
selfupdate.py [FL-3097] fbt, faploader: minimal app module implementation (#2420) 2023-03-14 23:29:28 +09:00
serial_cli.py [FL-3162] Moved ufbt to fbt codebase (#2520) 2023-04-06 10:44:37 +08:00
slideshow.py slideshow.py: add return code on error (#1636) 2022-08-23 01:24:08 +09:00
storage.py [FL-3097] fbt, faploader: minimal app module implementation (#2420) 2023-03-14 23:29:28 +09:00
update.py Update update.py (#2426) 2023-02-25 22:41:49 +09:00
version.py fbt: explicitly set dist suffix length, not depending on environment settings. See (#2497) 2023-03-16 22:46:18 +09:00

About

This folder contains supplementary scripts that automates routine actions. Flashing scripts are based on cli version of STM32CubeProgrammer. You will need to add STM32_Programmer_CLI to your path to use them.

Flashing empty MCU/Flipper

Always flash your device in the following sequence:

  • OTP (Only on empty MCU)
  • Core1 and Core2 firmware flashing
  • Option Bytes

Otp flashing

!!! Flashing incorrect OTP may permanently brick your device !!!

Normally OTP data generated and flashed at the factory. In case if MCU was replaced you'll need correct OTP data to be able to use companion applications. Use otp.py to generate and flash OTP data. You will need exact main board revision to generate OTP data. It can be found on main PCB. Also display type, region and etc...

!!! Flashing incorrect OTP may permanently brick your device !!!

Core1 and Core2 firmware flashing

Core2 goes first, then Core1. Never flash FUS or you will lose your job, girlfriend and keys in secure enclave.

Option Bytes

!!! Setting incorrect Option Bytes may brick your MCU !!!

Defaults are mostly OK, but there are couple things that we'd like to tune. Also, OB may be damaged, so we've made couple scripts to check and set option bytes.

!!! Setting incorrect Option Bytes may brick your MCU !!!

Checking option bytes:

ob.py check

Setting option bytes:

ob.py set

Assets delivery

Run in the root folder of the repo:

python scripts/storage.py -p <flipper_cli_port> send assets/resources /ext

Slideshow creation

Put fullscreen slideshow frames in .png format into assets/slideshow/my_show folder, named frame_xx.png, where xx is zero-padded frame number, starting with #0.

Then run

python scripts/slideshow.py -i assets/slideshow/my_show/ -o assets/slideshow/my_show/.slideshow

Upload generated .slideshow file to Flipper's internal storage and restart it.