flipperzero-firmware/firmware/targets/f6/furi-hal/furi-hal-spi-config.c
あく 37d7870e52
[FL-1666] Bootloader: info screen when we going to DFU. FuriHal: port SPI to LL. Cleanup. (#634)
* FuriHal: port spi to ll. Bootloader: add spi and display.
* Makefile: rollback disabled freertos introspection
* FuriHal: spi lock asserts. F6: minor cleanup port sdcard shenanigans to furi_hal_gpio.
* SdCard: port missing bits to furi-hal-gpio
* FuriHal: fix broken RX in SPI, update SPI API usage. RFAL: more asserts in SPI platform code.
* GUI: clear canvas on start. FuriHal: no pullup on radio spi bus.
* FuriHal: use check instead of assert in spi lock routines
* FuriHal: remove timeouts
* SdHal: add guard time to SDCARD CS PIN control.
* FuriHal: proper name for SPI device reconfigure routine. SdHal: one more enterprise delay and better documentation.
* Bootloader: update DFU text and add image.
* FuriHal: drop unused ST HAL modules.
* SdHal: fixed swapped hal_gpio_init_ex arguments
* SpiHal: fixed swapped hal_gpio_init_ex arguments
* IrdaHal: use hal_gpio_init instead of hal_gpio_init_ex
* RfidHal: fixed swapped hal_gpio_init_ex arguments

Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2021-08-12 11:48:05 +03:00

104 lines
3.2 KiB
C

#include <furi-hal-spi-config.h>
#include <furi-hal-resources.h>
#define SPI_R SPI1
#define SPI_D SPI2
const LL_SPI_InitTypeDef furi_hal_spi_config_nfc = {
.Mode = LL_SPI_MODE_MASTER,
.TransferDirection = LL_SPI_FULL_DUPLEX,
.DataWidth = LL_SPI_DATAWIDTH_8BIT,
.ClockPolarity = LL_SPI_POLARITY_LOW,
.ClockPhase = LL_SPI_PHASE_2EDGE,
.NSS = LL_SPI_NSS_SOFT,
.BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV8,
.BitOrder = LL_SPI_MSB_FIRST,
.CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE,
.CRCPoly = 7,
};
const LL_SPI_InitTypeDef furi_hal_spi_config_subghz = {
.Mode = LL_SPI_MODE_MASTER,
.TransferDirection = LL_SPI_FULL_DUPLEX,
.DataWidth = LL_SPI_DATAWIDTH_8BIT,
.ClockPolarity = LL_SPI_POLARITY_LOW,
.ClockPhase = LL_SPI_PHASE_1EDGE,
.NSS = LL_SPI_NSS_SOFT,
.BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV8,
.BitOrder = LL_SPI_MSB_FIRST,
.CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE,
.CRCPoly = 7,
};
const LL_SPI_InitTypeDef furi_hal_spi_config_display = {
.Mode = LL_SPI_MODE_MASTER,
.TransferDirection = LL_SPI_FULL_DUPLEX,
.DataWidth = LL_SPI_DATAWIDTH_8BIT,
.ClockPolarity = LL_SPI_POLARITY_LOW,
.ClockPhase = LL_SPI_PHASE_1EDGE,
.NSS = LL_SPI_NSS_SOFT,
.BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV16,
.BitOrder = LL_SPI_MSB_FIRST,
.CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE,
.CRCPoly = 7,
};
/**
* SD Card in fast mode (after init)
*/
const LL_SPI_InitTypeDef furi_hal_spi_config_sd_fast = {
.Mode = LL_SPI_MODE_MASTER,
.TransferDirection = LL_SPI_FULL_DUPLEX,
.DataWidth = LL_SPI_DATAWIDTH_8BIT,
.ClockPolarity = LL_SPI_POLARITY_LOW,
.ClockPhase = LL_SPI_PHASE_1EDGE,
.NSS = LL_SPI_NSS_SOFT,
.BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV2,
.BitOrder = LL_SPI_MSB_FIRST,
.CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE,
.CRCPoly = 7,
};
/**
* SD Card in slow mode (before init)
*/
const LL_SPI_InitTypeDef furi_hal_spi_config_sd_slow = {
.Mode = LL_SPI_MODE_MASTER,
.TransferDirection = LL_SPI_FULL_DUPLEX,
.DataWidth = LL_SPI_DATAWIDTH_8BIT,
.ClockPolarity = LL_SPI_POLARITY_LOW,
.ClockPhase = LL_SPI_PHASE_1EDGE,
.NSS = LL_SPI_NSS_SOFT,
.BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV32,
.BitOrder = LL_SPI_MSB_FIRST,
.CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE,
.CRCPoly = 7,
};
osMutexId_t spi_mutex_d = NULL;
osMutexId_t spi_mutex_r = NULL;
const FuriHalSpiBus spi_r = {
.spi=SPI_R,
.mutex=&spi_mutex_r,
.miso=&gpio_spi_r_miso,
.mosi=&gpio_spi_r_mosi,
.clk=&gpio_spi_r_sck,
};
const FuriHalSpiBus spi_d = {
.spi=SPI_D,
.mutex=&spi_mutex_d,
.miso=&gpio_spi_d_miso,
.mosi=&gpio_spi_d_mosi,
.clk=&gpio_spi_d_sck,
};
const FuriHalSpiDevice furi_hal_spi_devices[FuriHalSpiDeviceIdMax] = {
{ .bus=&spi_r, .config=&furi_hal_spi_config_subghz, .chip_select=&gpio_subghz_cs, },
{ .bus=&spi_d, .config=&furi_hal_spi_config_display, .chip_select=&gpio_display_cs, },
{ .bus=&spi_d, .config=&furi_hal_spi_config_sd_fast, .chip_select=&gpio_sdcard_cs, },
{ .bus=&spi_d, .config=&furi_hal_spi_config_sd_slow, .chip_select=&gpio_sdcard_cs, },
{ .bus=&spi_r, .config=&furi_hal_spi_config_nfc, .chip_select=&gpio_nfc_cs },
};