flipperzero-firmware/firmware/targets/f3/Inc
あく f05ffddbde
Power: bq25896 and bq27220 drivers, portable power api. (#224)
* Power: add portability layer, port to F3.
* F3: bq25896 driver stab
* GUI: new primary and secondary fonts
* F3: bq25896 register map, basic functions
* F3: move bq27220 command descritpion to separate file. Code format.
* Power: OTG enable/disable
* Power: choose more correct profile
* F3: pet bq25896 watchdog sometimes
2020-11-11 09:31:35 +03:00
..
adc.h Firmware, Bootloader: add f3 target. (#215) 2020-11-06 13:52:50 +03:00
bq25896_reg.h Power: bq25896 and bq27220 drivers, portable power api. (#224) 2020-11-11 09:31:35 +03:00
bq25896.h Power: bq25896 and bq27220 drivers, portable power api. (#224) 2020-11-11 09:31:35 +03:00
bq27220_reg.h Power: bq25896 and bq27220 drivers, portable power api. (#224) 2020-11-11 09:31:35 +03:00
bq27220.h Power: bq25896 and bq27220 drivers, portable power api. (#224) 2020-11-11 09:31:35 +03:00
comp.h Firmware, Bootloader: add f3 target. (#215) 2020-11-06 13:52:50 +03:00
FreeRTOSConfig.h Firmware, Bootloader: add f3 target. (#215) 2020-11-06 13:52:50 +03:00
gpio.h Firmware, Bootloader: add f3 target. (#215) 2020-11-06 13:52:50 +03:00
i2c.h Power: bq25896 and bq27220 drivers, portable power api. (#224) 2020-11-11 09:31:35 +03:00
main.h Firmware, Bootloader: add f3 target. (#215) 2020-11-06 13:52:50 +03:00
rf.h Firmware, Bootloader: add f3 target. (#215) 2020-11-06 13:52:50 +03:00
rtc.h Firmware, Bootloader: add f3 target. (#215) 2020-11-06 13:52:50 +03:00
spi.h Firmware, Bootloader: add f3 target. (#215) 2020-11-06 13:52:50 +03:00
stm32wbxx_hal_conf.h Firmware, Bootloader: add f3 target. (#215) 2020-11-06 13:52:50 +03:00
stm32wbxx_it.h Firmware, Bootloader: add f3 target. (#215) 2020-11-06 13:52:50 +03:00
tim.h Firmware, Bootloader: add f3 target. (#215) 2020-11-06 13:52:50 +03:00
usart.h Firmware, Bootloader: add f3 target. (#215) 2020-11-06 13:52:50 +03:00
usb_device.h Firmware, Bootloader: add f3 target. (#215) 2020-11-06 13:52:50 +03:00
usbd_cdc_if.h Firmware, Bootloader: add f3 target. (#215) 2020-11-06 13:52:50 +03:00
usbd_conf.h Firmware, Bootloader: add f3 target. (#215) 2020-11-06 13:52:50 +03:00
usbd_desc.h Firmware, Bootloader: add f3 target. (#215) 2020-11-06 13:52:50 +03:00