8073992925
* RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
109 lines
3.1 KiB
C
109 lines
3.1 KiB
C
#pragma once
|
|
|
|
#include <stm32wbxx.h>
|
|
#include <stm32wbxx_ll_gpio.h>
|
|
#include <stm32wbxx_ll_spi.h>
|
|
|
|
#define BUTTON_BACK_GPIO_Port GPIOC
|
|
#define BUTTON_BACK_Pin LL_GPIO_PIN_13
|
|
#define BUTTON_DOWN_GPIO_Port GPIOC
|
|
#define BUTTON_DOWN_Pin LL_GPIO_PIN_6
|
|
#define BUTTON_LEFT_GPIO_Port GPIOB
|
|
#define BUTTON_LEFT_Pin LL_GPIO_PIN_11
|
|
#define BUTTON_OK_GPIO_Port GPIOH
|
|
#define BUTTON_OK_Pin LL_GPIO_PIN_3
|
|
#define BUTTON_RIGHT_GPIO_Port GPIOB
|
|
#define BUTTON_RIGHT_Pin LL_GPIO_PIN_12
|
|
#define BUTTON_UP_GPIO_Port GPIOB
|
|
#define BUTTON_UP_Pin LL_GPIO_PIN_10
|
|
|
|
#define CC1101_CS_GPIO_Port GPIOD
|
|
#define CC1101_CS_Pin LL_GPIO_PIN_0
|
|
#define CC1101_G0_GPIO_Port GPIOA
|
|
#define CC1101_G0_Pin LL_GPIO_PIN_1
|
|
|
|
#define DISPLAY_CS_GPIO_Port GPIOC
|
|
#define DISPLAY_CS_Pin LL_GPIO_PIN_11
|
|
#define DISPLAY_DI_GPIO_Port GPIOB
|
|
#define DISPLAY_DI_Pin LL_GPIO_PIN_1
|
|
#define DISPLAY_RST_GPIO_Port GPIOB
|
|
#define DISPLAY_RST_Pin LL_GPIO_PIN_0
|
|
|
|
#define IR_RX_GPIO_Port GPIOA
|
|
#define IR_RX_Pin LL_GPIO_PIN_0
|
|
#define IR_TX_GPIO_Port GPIOB
|
|
#define IR_TX_Pin LL_GPIO_PIN_9
|
|
|
|
#define NFC_CS_GPIO_Port GPIOE
|
|
#define NFC_CS_Pin LL_GPIO_PIN_4
|
|
|
|
#define PA4_GPIO_Port GPIOA
|
|
#define PA4_Pin LL_GPIO_PIN_4
|
|
#define PA6_GPIO_Port GPIOA
|
|
#define PA6_Pin LL_GPIO_PIN_6
|
|
#define PA7_GPIO_Port GPIOA
|
|
#define PA7_Pin LL_GPIO_PIN_7
|
|
#define PB2_GPIO_Port GPIOB
|
|
#define PB2_Pin LL_GPIO_PIN_2
|
|
#define PB3_GPIO_Port GPIOB
|
|
#define PB3_Pin LL_GPIO_PIN_3
|
|
#define PC0_GPIO_Port GPIOC
|
|
#define PC0_Pin LL_GPIO_PIN_0
|
|
#define PC1_GPIO_Port GPIOC
|
|
#define PC1_Pin LL_GPIO_PIN_1
|
|
#define PC3_GPIO_Port GPIOC
|
|
#define PC3_Pin LL_GPIO_PIN_3
|
|
|
|
#define PERIPH_POWER_GPIO_Port GPIOA
|
|
#define PERIPH_POWER_Pin LL_GPIO_PIN_3
|
|
|
|
#define QUARTZ_32MHZ_IN_GPIO_Port GPIOC
|
|
#define QUARTZ_32MHZ_IN_Pin LL_GPIO_PIN_14
|
|
#define QUARTZ_32MHZ_OUT_GPIO_Port GPIOC
|
|
#define QUARTZ_32MHZ_OUT_Pin LL_GPIO_PIN_15
|
|
|
|
#define RFID_OUT_GPIO_Port GPIOB
|
|
#define RFID_OUT_Pin LL_GPIO_PIN_13
|
|
#define RFID_PULL_GPIO_Port GPIOA
|
|
#define RFID_PULL_Pin LL_GPIO_PIN_2
|
|
#define RFID_RF_IN_GPIO_Port GPIOC
|
|
#define RFID_RF_IN_Pin LL_GPIO_PIN_5
|
|
#define RFID_TUNE_GPIO_Port GPIOA
|
|
#define RFID_TUNE_Pin LL_GPIO_PIN_8
|
|
|
|
#define RF_SW_0_GPIO_Port GPIOC
|
|
#define RF_SW_0_Pin LL_GPIO_PIN_4
|
|
|
|
#define SD_CD_GPIO_Port GPIOC
|
|
#define SD_CD_Pin LL_GPIO_PIN_10
|
|
#define SD_CS_GPIO_Port GPIOC
|
|
#define SD_CS_Pin LL_GPIO_PIN_12
|
|
|
|
#define SPEAKER_GPIO_Port GPIOB
|
|
#define SPEAKER_Pin LL_GPIO_PIN_8
|
|
|
|
#define VIBRO_GPIO_Port GPIOA
|
|
#define VIBRO_Pin LL_GPIO_PIN_15
|
|
|
|
#define iBTN_GPIO_Port GPIOB
|
|
#define iBTN_Pin LL_GPIO_PIN_14
|
|
|
|
#define USART1_TX_Pin LL_GPIO_PIN_6
|
|
#define USART1_TX_Port GPIOB
|
|
#define USART1_RX_Pin LL_GPIO_PIN_7
|
|
#define USART1_RX_Port GPIOB
|
|
|
|
#define SPI_D_MISO_GPIO_Port GPIOC
|
|
#define SPI_D_MISO_Pin LL_GPIO_PIN_2
|
|
#define SPI_D_MOSI_GPIO_Port GPIOB
|
|
#define SPI_D_MOSI_Pin LL_GPIO_PIN_15
|
|
#define SPI_D_SCK_GPIO_Port GPIOD
|
|
#define SPI_D_SCK_Pin LL_GPIO_PIN_1
|
|
|
|
#define SPI_R_MISO_GPIO_Port GPIOB
|
|
#define SPI_R_MISO_Pin LL_GPIO_PIN_4
|
|
#define SPI_R_MOSI_GPIO_Port GPIOB
|
|
#define SPI_R_MOSI_Pin LL_GPIO_PIN_5
|
|
#define SPI_R_SCK_GPIO_Port GPIOA
|
|
#define SPI_R_SCK_Pin LL_GPIO_PIN_5
|