flipperzero-firmware/applications/ibutton/ibutton_app.cpp
Georgii Surkov 01434265f6
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168)
* Disable USART in sleep
* Restore UART state on suspend/resume
* FuriHal: Enable stop mode and add insomnia to I2C and SPI
* Remove IDLE interrupt
* FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep
* FuriHal: tie stop mode debug with debug rtc flag
* FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag
* FuriHal: move resource init to early stage
* Add EXTI pending check, enable debug traps with compile-time flag
* Wrap sleep debug functions in conditional compilation
* Remove erroneous changed
* Do not use CSS, remove it from everywhere
* Enable/disable USB on VBUS connect (prototype)
* FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores
* FuriHal: honor c1 LMPS
* USB mode switch fix
* Applications: add flags and insomnia bypass system
* Correct spelling
* FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api
* FuriHal: extra check on reinit request
* FuriHal: rename gpio_display_rst pin to gpio_display_rst_n
* FuriHal: add debug HAL
* FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit
* FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag
* FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works
* FuriHal: take insomnia while shutdown
* Remove USB switch on/off on VBUS change
* Better tick skew handling
* Improve tick consistency under load
* Add USB_HP dummy IRQ handler
* Move interrupt check closer to sleep
* Clean up includes
* Re-enable Insomnia globally
* FuriHal: enable CSS
* FuriHal: remove questionable core2 clock shenanigans
* FuriHal: use core1 RCC registers in idle timer config
* FuriHal: return back CSS handlers, add lptim isr dispatching

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 16:29:51 +03:00

343 lines
8.9 KiB
C++

#include "ibutton_app.h"
#include <stdarg.h>
#include <furi_hal.h>
#include <m-string.h>
#include <toolbox/path.h>
#include <flipper_format/flipper_format.h>
const char* iButtonApp::app_folder = "/any/ibutton";
const char* iButtonApp::app_extension = ".ibtn";
const char* iButtonApp::app_filetype = "Flipper iButton key";
void iButtonApp::run(void* args) {
iButtonEvent event;
bool consumed;
bool exit = false;
make_app_folder();
if(args && load_key((const char*)args)) {
current_scene = Scene::SceneEmulate;
}
scenes[current_scene]->on_enter(this);
while(!exit) {
view.receive_event(&event);
consumed = scenes[current_scene]->on_event(this, &event);
if(!consumed) {
if(event.type == iButtonEvent::Type::EventTypeBack) {
exit = switch_to_previous_scene();
}
}
};
scenes[current_scene]->on_exit(this);
}
iButtonApp::iButtonApp()
: notification{"notification"}
, storage{"storage"}
, dialogs{"dialogs"} {
key = ibutton_key_alloc();
key_worker = ibutton_worker_alloc();
ibutton_worker_start_thread(key_worker);
}
iButtonApp::~iButtonApp() {
for(std::map<Scene, iButtonScene*>::iterator it = scenes.begin(); it != scenes.end(); ++it) {
delete it->second;
}
scenes.clear();
ibutton_worker_stop_thread(key_worker);
ibutton_worker_free(key_worker);
ibutton_key_free(key);
}
iButtonAppViewManager* iButtonApp::get_view_manager() {
return &view;
}
void iButtonApp::switch_to_next_scene(Scene next_scene) {
previous_scenes_list.push_front(current_scene);
if(next_scene != Scene::SceneExit) {
scenes[current_scene]->on_exit(this);
current_scene = next_scene;
scenes[current_scene]->on_enter(this);
}
}
void iButtonApp::search_and_switch_to_previous_scene(std::initializer_list<Scene> scenes_list) {
Scene previous_scene = Scene::SceneStart;
bool scene_found = false;
while(!scene_found) {
previous_scene = get_previous_scene();
for(Scene element : scenes_list) {
if(previous_scene == element || previous_scene == Scene::SceneStart) {
scene_found = true;
break;
}
}
}
scenes[current_scene]->on_exit(this);
current_scene = previous_scene;
scenes[current_scene]->on_enter(this);
}
bool iButtonApp::switch_to_previous_scene(uint8_t count) {
Scene previous_scene = Scene::SceneStart;
for(uint8_t i = 0; i < count; i++) {
previous_scene = get_previous_scene();
if(previous_scene == Scene::SceneExit) break;
}
if(previous_scene == Scene::SceneExit) {
return true;
} else {
scenes[current_scene]->on_exit(this);
current_scene = previous_scene;
scenes[current_scene]->on_enter(this);
return false;
}
}
iButtonApp::Scene iButtonApp::get_previous_scene() {
Scene scene = previous_scenes_list.front();
previous_scenes_list.pop_front();
return scene;
}
iButtonWorker* iButtonApp::get_key_worker() {
return key_worker;
}
iButtonKey* iButtonApp::get_key() {
return key;
}
char* iButtonApp::get_file_name() {
return file_name;
}
uint8_t iButtonApp::get_file_name_size() {
return file_name_size;
}
void iButtonApp::notify_read() {
notification_message(notification, &sequence_blink_cyan_10);
}
void iButtonApp::notify_emulate() {
notification_message(notification, &sequence_blink_magenta_10);
}
void iButtonApp::notify_yellow_blink() {
notification_message(notification, &sequence_blink_yellow_10);
}
void iButtonApp::notify_error() {
notification_message(notification, &sequence_error);
}
void iButtonApp::notify_success() {
notification_message(notification, &sequence_success);
}
void iButtonApp::notify_green_on() {
notification_message_block(notification, &sequence_set_green_255);
}
void iButtonApp::notify_green_off() {
notification_message(notification, &sequence_reset_green);
}
void iButtonApp::notify_red_on() {
notification_message_block(notification, &sequence_set_red_255);
}
void iButtonApp::notify_red_off() {
notification_message(notification, &sequence_reset_red);
}
void iButtonApp::set_text_store(const char* text...) {
va_list args;
va_start(args, text);
vsnprintf(text_store, text_store_size, text, args);
va_end(args);
}
char* iButtonApp::get_text_store() {
return text_store;
}
uint8_t iButtonApp::get_text_store_size() {
return text_store_size;
}
// file managment
bool iButtonApp::save_key(const char* key_name) {
// Create ibutton directory if necessary
make_app_folder();
FlipperFormat* file = flipper_format_file_alloc(storage);
string_t key_file_name;
bool result = false;
string_init(key_file_name);
do {
// First remove key if it was saved (we rename the key)
if(!delete_key()) break;
// Save the key
ibutton_key_set_name(key, key_name);
// Set full file name, for new key
string_printf(
key_file_name, "%s/%s%s", app_folder, ibutton_key_get_name_p(key), app_extension);
// Open file for write
if(!flipper_format_file_open_always(file, string_get_cstr(key_file_name))) break;
// Write header
if(!flipper_format_write_header_cstr(file, iButtonApp::app_filetype, 1)) break;
// Write key type
if(!flipper_format_write_comment_cstr(file, "Key type can be Cyfral, Dallas or Metakom"))
break;
const char* key_type = ibutton_key_get_string_by_type(ibutton_key_get_type(key));
if(!flipper_format_write_string_cstr(file, "Key type", key_type)) break;
// Write data
if(!flipper_format_write_comment_cstr(
file, "Data size for Cyfral is 2, for Metakom is 4, for Dallas is 8"))
break;
if(!flipper_format_write_hex(
file, "Data", ibutton_key_get_data_p(key), ibutton_key_get_data_size(key)))
break;
result = true;
} while(false);
flipper_format_free(file);
string_clear(key_file_name);
if(!result) {
dialog_message_show_storage_error(dialogs, "Cannot save\nkey file");
}
return result;
}
bool iButtonApp::load_key_data(string_t key_path) {
FlipperFormat* file = flipper_format_file_alloc(storage);
bool result = false;
string_t data;
string_init(data);
do {
if(!flipper_format_file_open_existing(file, string_get_cstr(key_path))) break;
// header
uint32_t version;
if(!flipper_format_read_header(file, data, &version)) break;
if(string_cmp_str(data, iButtonApp::app_filetype) != 0) break;
if(version != 1) break;
// key type
iButtonKeyType type;
if(!flipper_format_read_string(file, "Key type", data)) break;
if(!ibutton_key_get_type_by_string(string_get_cstr(data), &type)) break;
// key data
uint8_t key_data[IBUTTON_KEY_DATA_SIZE] = {0};
if(!flipper_format_read_hex(file, "Data", key_data, ibutton_key_get_size_by_type(type)))
break;
ibutton_key_set_type(key, type);
ibutton_key_set_data(key, key_data, IBUTTON_KEY_DATA_SIZE);
result = true;
} while(false);
flipper_format_free(file);
string_clear(data);
if(!result) {
dialog_message_show_storage_error(dialogs, "Cannot load\nkey file");
}
return result;
}
bool iButtonApp::load_key(const char* key_name) {
bool result = false;
string_t key_path;
string_init_set_str(key_path, key_name);
result = load_key_data(key_path);
if(result) {
path_extract_filename_no_ext(key_name, key_path);
ibutton_key_set_name(key, string_get_cstr(key_path));
}
string_clear(key_path);
return result;
}
bool iButtonApp::load_key() {
bool result = false;
// Input events and views are managed by file_select
bool res = dialog_file_select_show(
dialogs,
app_folder,
app_extension,
get_file_name(),
get_file_name_size(),
ibutton_key_get_name_p(key));
if(res) {
string_t key_str;
// Get key file path
string_init_printf(key_str, "%s/%s%s", app_folder, get_file_name(), app_extension);
result = load_key_data(key_str);
if(result) {
ibutton_key_set_name(key, get_file_name());
}
string_clear(key_str);
}
return result;
}
bool iButtonApp::delete_key() {
string_t file_name;
bool result = false;
string_init_printf(
file_name, "%s/%s%s", app_folder, ibutton_key_get_name_p(key), app_extension);
result = storage_simply_remove(storage, string_get_cstr(file_name));
string_clear(file_name);
return result;
}
void iButtonApp::make_app_folder() {
if(!storage_simply_mkdir(storage, app_folder)) {
dialog_message_show_storage_error(dialogs, "Cannot create\napp folder");
}
}