f4f8ef59fd
* API HAL I2C: initialize bus on start * API HAL I2C: move timing register to resources, explain its value. Update cube project.
79 lines
2.7 KiB
C
79 lines
2.7 KiB
C
#include <api-hal-i2c.h>
|
|
#include <stm32wbxx_ll_i2c.h>
|
|
#include <stm32wbxx_ll_gpio.h>
|
|
#include <furi.h>
|
|
|
|
osMutexId_t api_hal_i2c_mutex = NULL;
|
|
|
|
void api_hal_i2c_init() {
|
|
api_hal_i2c_mutex = osMutexNew(NULL);
|
|
furi_check(api_hal_i2c_mutex);
|
|
|
|
LL_I2C_InitTypeDef I2C_InitStruct = {0};
|
|
LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
|
|
LL_RCC_SetI2CClockSource(LL_RCC_I2C1_CLKSOURCE_PCLK1);
|
|
|
|
LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOA);
|
|
GPIO_InitStruct.Pin = POWER_I2C_SCL_Pin | POWER_I2C_SDA_Pin;
|
|
GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
|
|
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
|
|
GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_OPENDRAIN;
|
|
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
|
|
GPIO_InitStruct.Alternate = LL_GPIO_AF_4;
|
|
LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_I2C1);
|
|
|
|
I2C_InitStruct.PeripheralMode = LL_I2C_MODE_I2C;
|
|
I2C_InitStruct.Timing = POWER_I2C_TIMINGS;
|
|
I2C_InitStruct.AnalogFilter = LL_I2C_ANALOGFILTER_ENABLE;
|
|
I2C_InitStruct.DigitalFilter = 0;
|
|
I2C_InitStruct.OwnAddress1 = 0;
|
|
I2C_InitStruct.TypeAcknowledge = LL_I2C_ACK;
|
|
I2C_InitStruct.OwnAddrSize = LL_I2C_OWNADDRESS1_7BIT;
|
|
LL_I2C_Init(I2C1, &I2C_InitStruct);
|
|
LL_I2C_EnableAutoEndMode(I2C1);
|
|
LL_I2C_SetOwnAddress2(I2C1, 0, LL_I2C_OWNADDRESS2_NOMASK);
|
|
LL_I2C_DisableOwnAddress2(I2C1);
|
|
LL_I2C_DisableGeneralCall(I2C1);
|
|
LL_I2C_EnableClockStretching(I2C1);
|
|
}
|
|
|
|
void api_hal_i2c_tx(I2C_TypeDef* instance, uint8_t address, const uint8_t *data, uint8_t size) {
|
|
LL_I2C_HandleTransfer(instance, address, LL_I2C_ADDRSLAVE_7BIT, size, LL_I2C_MODE_AUTOEND, LL_I2C_GENERATE_START_WRITE);
|
|
|
|
while (!LL_I2C_IsActiveFlag_STOP(instance)) {
|
|
if (LL_I2C_IsActiveFlag_TXIS(instance)) {
|
|
LL_I2C_TransmitData8(instance, (*data++));
|
|
}
|
|
}
|
|
|
|
LL_I2C_ClearFlag_STOP(instance);
|
|
}
|
|
|
|
void api_hal_i2c_rx(I2C_TypeDef* instance, uint8_t address, uint8_t *data, uint8_t size) {
|
|
LL_I2C_HandleTransfer(instance, address, LL_I2C_ADDRSLAVE_7BIT, size, LL_I2C_MODE_AUTOEND, LL_I2C_GENERATE_START_READ);
|
|
|
|
while (!LL_I2C_IsActiveFlag_STOP(instance)) {
|
|
if (LL_I2C_IsActiveFlag_RXNE(instance)) {
|
|
*data++ = LL_I2C_ReceiveData8(instance);
|
|
}
|
|
}
|
|
|
|
LL_I2C_ClearFlag_STOP(instance);
|
|
}
|
|
|
|
void api_hal_i2c_trx(I2C_TypeDef* instance, uint8_t address, const uint8_t *tx_data, uint8_t tx_size, uint8_t *rx_data, uint8_t rx_size) {
|
|
api_hal_i2c_tx(instance, address, tx_data, tx_size);
|
|
api_hal_i2c_rx(instance, address, rx_data, rx_size);
|
|
}
|
|
|
|
void api_hal_i2c_lock() {
|
|
furi_check(osMutexAcquire(api_hal_i2c_mutex, osWaitForever) == osOK);
|
|
}
|
|
|
|
void api_hal_i2c_unlock() {
|
|
furi_check(osMutexRelease(api_hal_i2c_mutex) == osOK);
|
|
}
|