flipperzero-firmware/firmware/targets/f6/target.mk
あく 851a44dc59
[FL-1528] SubGhz: dma send (#579)
* Gui: input injection in screen stream
* Cli: expose ASCII table in public header
* SubGhz: dma output draft
* SubGhz: output initialization cleanup
* SubGhz: update dma send routine, add subghz_tx cli command.
* SubGhz: proper register address for DMA
* SubGhz: proper, fully working dma+tim2 configuration
* SubGhz: transmit PT with cli.
* Drivers: fix invalid size in CC1101 PA_TABLE loading routine.
* Interrupts: configurable DMA isrs.
* F5: backport fixes.
* SubGhz: free buffer after use
* SubGhz: use sleep instead of reset at the end
* SubGhz: async tx repeat with circular DMA
* SubGhz: disable dma channel on complete, adjust PT send timings
* SubGhz: backport function singature change to F5
* SubGhz: add tx debug gpio
2021-07-15 16:54:11 +03:00

164 lines
7.7 KiB
Makefile

TOOLCHAIN = arm
BOOT_ADDRESS = 0x08000000
FW_ADDRESS = 0x08008000
OS_OFFSET = 0x00008000
FLASH_ADDRESS = 0x08008000
NO_BOOTLOADER ?= 0
ifeq ($(NO_BOOTLOADER), 1)
BOOT_ADDRESS = 0x08000000
FW_ADDRESS = 0x08000000
OS_OFFSET = 0x00000000
FLASH_ADDRESS = 0x08000000
CFLAGS += -DNO_BOOTLOADER
endif
API_HAL_OS_DEBUG ?= 0
ifeq ($(API_HAL_OS_DEBUG), 1)
CFLAGS += -DAPI_HAL_OS_DEBUG
endif
API_HAL_SUBGHZ_TX_GPIO ?= 0
ifneq ($(API_HAL_SUBGHZ_TX_GPIO), 0)
CFLAGS += -DAPI_HAL_SUBGHZ_TX_GPIO=$(API_HAL_SUBGHZ_TX_GPIO)
endif
ifeq ($(INVERT_RFID_IN), 1)
CFLAGS += -DINVERT_RFID_IN
endif
OPENOCD_OPTS = -f interface/stlink.cfg -c "transport select hla_swd" -f ../debug/stm32wbx.cfg -c "stm32wbx.cpu configure -rtos auto" -c "init"
BOOT_CFLAGS = -DBOOT_ADDRESS=$(BOOT_ADDRESS) -DFW_ADDRESS=$(FW_ADDRESS) -DOS_OFFSET=$(OS_OFFSET)
MCU_FLAGS = -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard
CFLAGS += $(MCU_FLAGS) $(BOOT_CFLAGS) -DSTM32WB55xx -Wall -fdata-sections -ffunction-sections
LDFLAGS += $(MCU_FLAGS) -specs=nosys.specs -specs=nano.specs
CPPFLAGS += -fno-rtti -fno-use-cxa-atexit -fno-exceptions
LDFLAGS += -Wl,--start-group -lstdc++ -lsupc++ -Wl,--end-group
MXPROJECT_DIR = $(TARGET_DIR)
API_HAL_DIR = $(TARGET_DIR)
CUBE_DIR = ../lib/STM32CubeWB
C_SOURCES += \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc_ex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_comp.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cortex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cryp.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_crc.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_crc_ex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_exti.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_hsem.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_ipcc.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pka.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rng.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc_ex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_spi.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_spi_ex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_lptim.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_adc.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_dma.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_gpio.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_i2c.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_rcc.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_tim.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lptim.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usb.c \
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/croutine.c \
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/event_groups.c \
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/list.c \
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/queue.c \
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c \
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/tasks.c \
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/timers.c \
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/cmsis_os2.c \
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F/port.c \
$(CUBE_DIR)/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c \
$(CUBE_DIR)/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c \
$(CUBE_DIR)/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c \
$(CUBE_DIR)/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c \
$(wildcard $(MXPROJECT_DIR)/Src/*.c) \
$(wildcard $(MXPROJECT_DIR)/Src/fatfs/*.c) \
$(wildcard $(API_HAL_DIR)/api-hal/*.c)
ASM_SOURCES += $(MXPROJECT_DIR)/startup_stm32wb55xx_cm4.s
# Common
CFLAGS += \
-DUSE_FULL_LL_DRIVER \
-DUSE_HAL_DRIVER \
-DHAVE_FREERTOS \
-DDEBUG_UART=huart1
ifeq ($(NO_BOOTLOADER), 1)
LDFLAGS += -T$(MXPROJECT_DIR)/stm32wb55xx_flash_cm4_no_boot.ld
else
LDFLAGS += -T$(MXPROJECT_DIR)/stm32wb55xx_flash_cm4_boot.ld
endif
CFLAGS += \
-I$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Inc \
-I$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Inc/Legacy \
-I$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/include \
-I$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2 \
-I$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F \
-I$(CUBE_DIR)/Middlewares/ST/STM32_USB_Device_Library/Core/Inc \
-I$(CUBE_DIR)/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc \
-I$(CUBE_DIR)/Drivers/CMSIS/Device/ST/STM32WBxx/Include \
-I$(CUBE_DIR)/Drivers/CMSIS/Include \
-I$(MXPROJECT_DIR)/Inc \
-I$(MXPROJECT_DIR)/Src/fatfs \
-I$(API_HAL_DIR)/api-hal \
# Ble glue
CFLAGS += -I$(TARGET_DIR)/ble-glue \
-I$(CUBE_DIR)/Utilities/lpm/tiny_lpm \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core/template \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/utilities \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/tl \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/shci
C_SOURCES += \
$(wildcard $(TARGET_DIR)/ble-glue/*.c) \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/utilities/otp.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/utilities/stm_list.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/utilities/dbg_trace.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/svc/Src/svc_ctl.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/svc/Src/dis.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/svc/Src/hrs.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core/template/osal.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core/auto/ble_hci_le.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core/auto/ble_gap_aci.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core/auto/ble_gatt_aci.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core/auto/ble_hal_aci.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/tl/tl_mbox.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/tl/hci_tl.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/tl/hci_tl_if.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/tl/shci_tl.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/tl/shci_tl_if.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/shci/shci.c
SVD_FILE = ../debug/STM32WB55_CM4.svd