Use temp dir

setup.sh

@@ -19,8 +19,21 @@ cd $ROOT_DIR
 # Pull Klipper
 git submodule update --init --recursive
 
+
+# Name Printer
+# Todo: avoid duplications
+NAME_NOT_VALID=true
+while $NAME_NOT_VALID ; do
+    PRINTER_NAME=$(dialog --backtitle 'drwho@hackers.town' --inputbox 'Name This Printer' 8 40 "${PRINTER_NAME}" 3>&1 1>&2 2>&3)
+    if [[ $PRINTER_NAME =~ ^[a-zA-Z0-9_-]+$ ]]; then
+        NAME_NOT_VALID=false
+    fi
+done
+
+cp -r $ROOT_DIR/dirs $ROOT_DIR/$PRINTER_NAME
+
 # Select Klipper Config
-cd $ROOT_DIR/dirs/klipper
+cd $ROOT_DIR/$PRINTER_NAME/klipper
 make menuconfig
 CONFIG_FILES=(`ls config`)
 CONFIG_FILES+=("Enter_Manually")
@@ -62,57 +75,51 @@ if [[ $DEVICE == "Enter_Manually" ]]; then
     DEVICE=$MANUAL_FILE
 fi
 
-# Name Printer
-# Todo: avoid duplications
-NAME_NOT_VALID=true
-while $NAME_NOT_VALID ; do
-    PRINTER_NAME=$(dialog --backtitle 'drwho@hackers.town' --inputbox 'Name This Printer' 8 40 "${PRINTER_NAME}" 3>&1 1>&2 2>&3)
-    if [[ $PRINTER_NAME =~ ^[a-zA-Z0-9_-]+$ ]]; then
-        NAME_NOT_VALID=false
-    fi
-done
-
 # Build Klipper
-cp $CONFIG_FILE $ROOT_DIR/dirs/klipper/printer.cfg
+cp $CONFIG_FILE $ROOT_DIR/$PRINTER_NAME/klipper/printer.cfg
-sed -i -e "s/^serial: .\+$/serial: \/dev\/serial\/by-id\/${DEVICE}/g" "${ROOT_DIR}/dirs/klipper/printer.cfg"
+sed -i -e "s/^serial: .\+$/serial: \/dev\/serial\/by-id\/${DEVICE}/g" "${ROOT_DIR}/$PRINTER_NAME/klipper/printer.cfg"
 make -j$(nproc)
 
 # Flash Firmware
 make flash FLASH_DEVICE=/dev/serial/by-id/$DEVICE
 
 # Copy over printer config file
-cd $ROOT_DIR/dirs
+cd $ROOT_DIR/$PRINTER_NAME
 cat $ROOT_DIR/config/macros.gcode >> printer.cfg.tmp
 cat klipper/printer.cfg >> printer.cfg.tmp
 mv printer.cfg.tmp printer_data/config/printer.cfg
 
 # Apply Edits to Configs
-cd $ROOT_DIR/dirs/printer_data/config
+cd $ROOT_DIR/$PRINTER_NAME/printer_data/config
 sed -i -e "s/PRINTERNAME/$PRINTER_NAME/g" "moonraker.conf"
+sed -i -e "s/pi/$USER/g" "moonraker.conf"
 
-cd $ROOT_DIR/dirs/mainsail-config
+cd $ROOT_DIR/$PRINTER_NAME/mainsail-config
-sed -i -e "s/~\/printer_data/~\/$PRINTER_NAME\/printer_data/g" "client.cfg"
+sed -i -e "s/$HOME\/printer_data/$HOME\/$PRINTER_NAME\/printer_data/g" "client.cfg"
+sed -i -e "s/pi/$USER/g" "client.cfg"
 
 cd $ROOT_DIR/config/services
 # TODO: Add Crowsnest Support
 FILES=(moonraker klipper)
 for f in ${FILES[@]}; do
     sed -i -e "s/PRINTERNAME/$PRINTER_NAME/g" "${f}.service"
+    sed -i -e "s/pi/$USER/g" "${f}.service"
 done
 
 # Download Mainsail
 cd $ROOT_DIR
 wget -q -O mainsail.zip https://github.com/mainsail-crew/mainsail/releases/latest/download/mainsail.zip
-unzip -o mainsail.zip -d dirs/mainsail
+unzip -o mainsail.zip -d $PRINTER_NAME/mainsail
+rm mainsail.zip
 
 # Copy To Final Location
-mkdir -p ~/$PRINTER_NAME
+mkdir -p $HOME/$PRINTER_NAME
-cp -r dirs/* ~/$PRINTER_NAME
+cp -r $PRINTER_NAME/* $HOME/$PRINTER_NAME
 
-# Create Empty Dirs
+# Create Empty $PRINTER_NAME
-DIRS=(logs gcodes certs backup mainsail-config)
+$PRINTER_NAME=(logs gcodes certs backup mainsail-config)
-for d in ${DIRS[@]}; do
+for d in ${$PRINTER_NAME[@]}; do
-    mkdir -p "~/$PRINTER_NAME/$d"
+    mkdir -p "$HOME/$PRINTER_NAME/$d"
 done
 
 # Configure System Services
@@ -120,12 +127,12 @@ cd $ROOT_DIR/config/services
 SERVICES=()
 for f in *.service; do
     SERVICES+=($f)
-    cp "${f}" "${PRINTER_NAME}-${f}"
+    cp "${f}" "${ROOT_DIR}/${PRINTER_NAME}/${PRINTER_NAME}-${f}"
-    sed -i -e "s/PRINTERNAME/$PRINTER_NAME/g" "${PRINTER_NAME}-${f}"
+    sed -i -e "s/PRINTERNAME/$PRINTER_NAME/g" "${ROOT_DIR}/${PRINTER_NAME}/${PRINTER_NAME}-${f}"
 done
 
 # Install System Services
-sudo cp $ROOT_DIR/config/services/* /etc/systemd/system/
+sudo cp $ROOT_DIR/$PRINTER_NAME/*.service /etc/systemd/system/
 sudo systemctl daemon-reload
 for svc in ${SERVICES[@]}; do
     sudo systemctl enable $PRINTER_NAME-$svc
@@ -133,4 +140,3 @@ for svc in ${SERVICES[@]}; do
 done
 
 # Cleanup
-rm -rf "${ROOT_DIR}/mainsail.zip"