2024-06-13 19:21:56 +00:00
|
|
|
When something goes wrong, its nice to note it here. Also nice to note
|
|
|
|
any fixes (eg. resurfacing the milling platform).
|
|
|
|
|
|
|
|
## 2 May. 2013
|
|
|
|
|
|
|
|
Maximum X-Axis feed rate of 60in/min was moderately error prone,
|
|
|
|
occasionally triggering emergency stop. Reduced to 40in/min, identical
|
|
|
|
to Y-Axis setting. [mirage335 2013-05-02](User:mirage335 "wikilink")
|
|
|
|
|
|
|
|
## 2 Feb. 2013
|
|
|
|
|
|
|
|
Settings on Mach3 were incorrect; communication with the mill controller
|
|
|
|
was impossible. The following settings changes were made (and some
|
|
|
|
fiddling done) and the mill appears to be functioning and calibrated
|
|
|
|
well:
|
|
|
|
|
|
|
|
- Changing the port to address 0x378 allowed the spindle control to
|
|
|
|
function.
|
|
|
|
- Changing X,Y,Z,A drive and step ports to port 1 (0x378) and setting
|
|
|
|
low trigger on axis X.
|
|
|
|
- Recalibrated "steps per" with the calibration wizard under *settings*
|
|
|
|
using dial indicator (now set for ~16250).
|
|
|
|
|
|
|
|
Note: Often restarting Mach3 seems to be required to actually update
|
|
|
|
some of the port settings (although it pretends otherwise). Mill
|
|
|
|
calibration was accurate to only ~0.003" (which maybe a limit imposed by
|
|
|
|
the limited rigidity of the mill+stand).
|
|
|
|
|
|
|
|
[Shawn Nock (OpenPGP: 0x65118FA5)](User:Nock "wikilink") 12:47, 3
|
|
|
|
February 2013 (PST)
|
|
|
|
|
|
|
|
## 22 Jan. 2013
|
|
|
|
|
|
|
|
- Major upgrades in progress thanks to TJ.
|
|
|
|
|
|
|
|
## 10 July 2012
|
|
|
|
|
|
|
|
- Platform still needs replacing, but Barlow resurfaced the remaining
|
|
|
|
usable area. At least now it is level again.
|
|
|
|
|
|
|
|
## 28 Apr. 2012
|
|
|
|
|
|
|
|
- Someone accidentally resurfaced the milling platform (milled too
|
|
|
|
deep). Now the platform needs replacing.
|
|
|
|
|
|
|
|
## 11 Apr. 2012
|
|
|
|
|
|
|
|
- Milling platform is no longer level, thanks to the screws holding it
|
|
|
|
down being loosened up. Needs resurfacing.
|
|
|
|
|
2024-06-13 01:48:44 +00:00
|
|
|
[Category:CNC_Mill](Category:CNC_Mill "wikilink")
|