59 lines
4.0 KiB
Markdown
59 lines
4.0 KiB
Markdown
|
HacDC computer network - Jan. 2, 2020 Tabletop computer terms - move
|
||
|
over means to use the touch pad to move the arrow on the screen to the
|
||
|
described position click on means to move the arrow to the described
|
||
|
position & then press either click button type means to type what is
|
||
|
described type: means to type the characters that follow the space after
|
||
|
: enter means to type what is described (if anything) & then press the
|
||
|
Enter key (at right) enter: means to type the characters that follow the
|
||
|
space after : & then press Enter It is possible to connect to devices on
|
||
|
the network using the internet or using the local network. To connect
|
||
|
using the internet: 1. Enter ssh systemname@machinename.hacdc.org (i.e.,
|
||
|
ssh renderadmin@jobs.hascdc.org) 2. At Password: enter standard password
|
||
|
To connect using the HacDC network: 1. Enter ssh
|
||
|
systemname@machinename.local (i.e., ssh renderadmin@jobs.local) 2. If
|
||
|
the system asks Are you sure you want to continue connecting (yes/no)?
|
||
|
enter: yes 3. At Password: enter standard password To check if it is
|
||
|
possible to communicate with a device: 1. Open a MATE terminal (if not
|
||
|
already present; see Documentation-Tabletop_computers) 2. Enter ping
|
||
|
machinename.hacdc.org or ping machinename.local (i.e., ping jobs.local)
|
||
|
3. If it responds \## bytes from \###... it is communicating 4. To stop
|
||
|
pinging type Ctrl C To determine the path to the address the computer is
|
||
|
connected to: 1. Enter mtr address (i.e., mtr jobs.hacdc.org) 2. When
|
||
|
finished click on Quit If the network will not connect: 1. Try using the
|
||
|
other connection method (.local if .hacdc.org doesn't work or vice
|
||
|
versa) 2. Check if it is possible to communicate by using ping (see
|
||
|
above) 3. If it is not communicating stop here & get help 4. Enter mtr
|
||
|
address (i.e., mtr jobs.hacdc.org) 5. Look at the column labeled Loss;
|
||
|
if any of the values are close to 100% that could be the problem 6.
|
||
|
Click on Quit 7. If there was a problem with the path restart the
|
||
|
computer & hope it uses a different path this time Components of the
|
||
|
network: Renderadmin computer (large computer at left under table below
|
||
|
clock) - for converting .escad files to .stl files for 3D printing
|
||
|
etc. - machine name=jobs, system name=renderadmin 3D printer computer
|
||
|
(Dell Optiplex 760 to left of Rostock) - controls Rostock, Mini, & Taz
|
||
|
3D printers - machine name=pronterhost, system name=hacdc Classroom TV
|
||
|
computer (large Sharkoon below big screen) - controls screen - machine
|
||
|
name=classroom-tv, system name=hacdc Laser cutter computer (small
|
||
|
computer in cabinet below laser cutter) - controls laser cutter Here is
|
||
|
the current HacDC network wiring: On floor below clock - Netgear ProSAFE
|
||
|
16-Port Gigabit Click Switch 1 - gray - TP-Link Router 2 2 - gray -
|
||
|
Printer (paper) computer 14 - white - open (by laser cutter) 16 -
|
||
|
orange - renderadmin computer others - no connection On bottom shelf
|
||
|
over sink - LinkSys VOIP Voice Phone - phone cable - Uniden EX18560
|
||
|
phone Internet - blue - LinkSys switch 6 C7 TP-Link AC1750 Wireless
|
||
|
Dual-Band Gigabit Router Internet - blue - D-Link switch Ethernet 1 -
|
||
|
gray - open 2 - yellow - TP-Link switch 7 Middle shelf - D-Link Wireless
|
||
|
AC750 Dual-Band Router DIR-817LW LAN 4 - blue - TP-Link switch 8
|
||
|
Internet - gray - LinkSys switch 5 TP-Link TL-SG1008D Gigabit Switch 1 -
|
||
|
yellow - wall socket 2 - gray - Netgear switch 1 3 - blue - 3D printer
|
||
|
computer 4 - no connection 5 - black - Linksys switch 1 6 - no
|
||
|
connection 7 - yellow - TP-Link router Ethernet 2 8 - blue - D-Link
|
||
|
router LAN 4 Linksys Gigabit 8-Port Workgroup Switch (note that the
|
||
|
connections on this switch are numbered from right to left while the
|
||
|
TP-Link switch is left-to-right) 1 - black - TP-Link switch 5 2 - no
|
||
|
connection 3 - gray - open (below HARC) 4 - black - open (below HARC)
|
||
|
5 - gray - D-Link router Internet 6 - blue - Linksys VOIP Voice Internet
|
||
|
7 - blue - open (below HARC) 8 - no connection On table below TV
|
||
|
screen - D-Link igreen DGS-1005D switch 1 - blue - TP-Link router
|
||
|
Internet 2 - gray - open 3-4 - no connection 5 - yellow - TV computer If
|
||
|
I read this right 3 of the 4 switches are unnecessary!
|