diff --git a/rtdata/languages/Catala b/rtdata/languages/Catala
index f4c0ab91a..ce7e9e378 100644
--- a/rtdata/languages/Catala
+++ b/rtdata/languages/Catala
@@ -1611,7 +1611,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: -
!SAVEDLG_SUBSAMP_TOOLTIP;Best compression:\nJ:a:b 4:2:0\nh/v 2/2\nChroma halved horizontally and vertically.\n\nBalanced:\nJ:a:b 4:2:2\nh/v 2/1\nChroma halved horizontally.\n\nBest quality:\nJ:a:b 4:4:4\nh/v 1/1\nNo chroma subsampling.
!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_BWMIX_ALGO;Algorithm OYCPM
!TP_BWMIX_ALGO_LI;Linear
!TP_BWMIX_ALGO_SP;Special effects
@@ -1874,7 +1874,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: -
!TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image.
!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
!TP_EPD_GAMMA;Gamma
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
diff --git a/rtdata/languages/Chinese (Simplified) b/rtdata/languages/Chinese (Simplified)
index e4d52b774..f0d50ec3e 100644
--- a/rtdata/languages/Chinese (Simplified)
+++ b/rtdata/languages/Chinese (Simplified)
@@ -1599,7 +1599,7 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: -
!THRESHOLDSELECTOR_T;Top
!THRESHOLDSELECTOR_TL;Top-left
!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_BWMIX_ALGO;Algorithm OYCPM
!TP_BWMIX_ALGO_TOOLTIP;Linear: will produce a normal linear response.\nSpecial effects: will produce special effects by mixing channels non-linearly.
!TP_BWMIX_CC_ENABLED;Adjust complementary color
@@ -1819,7 +1819,6 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: -
!TP_EPD_EDGESTOPPING;Edge stopping
!TP_EPD_GAMMA;Gamma
!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
diff --git a/rtdata/languages/Chinese (Traditional) b/rtdata/languages/Chinese (Traditional)
index f6605f63e..b6e4dedbc 100644
--- a/rtdata/languages/Chinese (Traditional)
+++ b/rtdata/languages/Chinese (Traditional)
@@ -1413,7 +1413,7 @@ TP_WBALANCE_TEMPERATURE;色溫
!THRESHOLDSELECTOR_T;Top
!THRESHOLDSELECTOR_TL;Top-left
!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_BWMIX_ALGO;Algorithm OYCPM
!TP_BWMIX_ALGO_LI;Linear
!TP_BWMIX_ALGO_SP;Special effects
@@ -1702,7 +1702,6 @@ TP_WBALANCE_TEMPERATURE;色溫
!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
!TP_EPD_SCALE;Scale
!TP_EPD_STRENGTH;Strength
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
diff --git a/rtdata/languages/Czech b/rtdata/languages/Czech
index e8b11906d..56900e28b 100644
--- a/rtdata/languages/Czech
+++ b/rtdata/languages/Czech
@@ -1666,7 +1666,6 @@ TP_EPD_LABEL;Mapování tónů
TP_EPD_REWEIGHTINGITERATES;Počet průchodů převážení
TP_EPD_SCALE;Měřítko
TP_EPD_STRENGTH;Síla
-TP_EPD_TOOLTIP;Mapování tónů je dostupné v L*a*b* (standard) a CIECAM02 módu.\n\nV L*a*b* módu může být mapování tónů použito i pro zůstatkový obraz nástroje Vlnka\n\nPro zapnutí mapování tónů v CIECAM02 módu zapněte prosím následující volby:\n1. CIECAM02\n2. Algoritmus="Jas a pestrobarevnost (QM)"\n3. "Mapování tónů pomocí jasu CIECAM02 (Q)"
TP_EXPOSURE_AUTOLEVELS;Automatické úrovně
TP_EXPOSURE_AUTOLEVELS_TIP;Přepne provedení Automatické úrovně na automatickou sadu hodnot parametrů založených na analýze obrázku\nPokud to je nezbytné, povolí rekonstrukci světel.
TP_EXPOSURE_BLACKLEVEL;Černá
diff --git a/rtdata/languages/Dansk b/rtdata/languages/Dansk
index f1b952b00..72b795c29 100644
--- a/rtdata/languages/Dansk
+++ b/rtdata/languages/Dansk
@@ -1410,7 +1410,7 @@ TP_WBALANCE_TEMPERATURE;Temperatur
!THRESHOLDSELECTOR_T;Top
!THRESHOLDSELECTOR_TL;Top-left
!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_BWMIX_ALGO;Algorithm OYCPM
!TP_BWMIX_ALGO_LI;Linear
!TP_BWMIX_ALGO_SP;Special effects
@@ -1699,7 +1699,6 @@ TP_WBALANCE_TEMPERATURE;Temperatur
!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
!TP_EPD_SCALE;Scale
!TP_EPD_STRENGTH;Strength
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
diff --git a/rtdata/languages/Deutsch b/rtdata/languages/Deutsch
index 0a3cddbcd..4bf12cbed 100644
--- a/rtdata/languages/Deutsch
+++ b/rtdata/languages/Deutsch
@@ -1707,7 +1707,6 @@ TP_EPD_LABEL;Tonwertkorrektur
TP_EPD_REWEIGHTINGITERATES;Iterationen
TP_EPD_SCALE;Faktor
TP_EPD_STRENGTH;Intensität
-TP_EPD_TOOLTIP;Tonwertkorrektur ist mit dem L*a*b*- und CIECAM02-Modus möglich.\n\nFür den CIECAM02-Modus müssen folgende Optionen aktiviert sein:\n1. CIECAM02\n2. Algorithmus = Helligkeit + Farbigkeit (QM)\n3. Tonwertkorrektur mittels CIECAM02-Helligkeit (Q)
TP_EXPOSURE_AUTOLEVELS;Auto
TP_EXPOSURE_AUTOLEVELS_TIP;Automatische Belichtungseinstellung\nbasierend auf Bildanalyse.
TP_EXPOSURE_BLACKLEVEL;Schwarzwert
diff --git a/rtdata/languages/English (UK) b/rtdata/languages/English (UK)
index de8f44a27..edde8946e 100644
--- a/rtdata/languages/English (UK)
+++ b/rtdata/languages/English (UK)
@@ -53,7 +53,7 @@ PREFERENCES_PRTPROFILE;Colour profile
PREFERENCES_TAB_COLORMGR;Colour Management
SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colours with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Colour Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-TOOLBAR_TOOLTIP_COLORPICKER;Lockable Colour Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+TOOLBAR_TOOLTIP_COLORPICKER;Lockable Colour Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
TOOLBAR_TOOLTIP_STRAIGHTEN;Straighten / fine rotation.\nShortcut: s\n\nIndicate the vertical or horizontal by drawing a guide line over the image preview. Angle of rotation will be shown next to the guide line. Centre of rotation is the geometrical centre of the image.
TP_BWMIX_CC_ENABLED;Adjust complementary colour
TP_BWMIX_CC_TOOLTIP;Enable to allow automatic adjustment of complementary colours in ROYGCBPM mode.
@@ -87,7 +87,6 @@ TP_DIRPYRDENOISE_MAIN_COLORSPACE;Colour space
TP_DIRPYREQUALIZER_ALGO;Skin Colour Range
TP_DIRPYREQUALIZER_ALGO_TOOLTIP;Fine: closer to the colours of the skin, minimizing the action on other colours\nLarge: avoid more artifacts.
TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colours (hue, chroma, luma) and the rest of the image.
-TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colourfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Clip control avoids clipped highlights caused by applying the flat field. If there are already clipped highlights before applying the flat field, clip control can lead to colour cast.
TP_GRADIENT_CENTER;Centre
diff --git a/rtdata/languages/English (US) b/rtdata/languages/English (US)
index 6b1526dcc..078989905 100644
--- a/rtdata/languages/English (US)
+++ b/rtdata/languages/English (US)
@@ -1310,7 +1310,7 @@
!THRESHOLDSELECTOR_T;Top
!THRESHOLDSELECTOR_TL;Top-left
!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TOOLBAR_TOOLTIP_CROP;Crop selection.\nShortcut: c\nMove the crop using Shift+mouse drag.
!TOOLBAR_TOOLTIP_HAND;Hand tool.\nShortcut: h
!TOOLBAR_TOOLTIP_STRAIGHTEN;Straighten / fine rotation.\nShortcut: s\n\nIndicate the vertical or horizontal by drawing a guide line over the image preview. Angle of rotation will be shown next to the guide line. Center of rotation is the geometrical center of the image.
@@ -1626,7 +1626,6 @@
!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
!TP_EPD_SCALE;Scale
!TP_EPD_STRENGTH;Strength
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
!TP_EXPOSURE_AUTOLEVELS;Auto Levels
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
!TP_EXPOSURE_BLACKLEVEL;Black
diff --git a/rtdata/languages/Espanol b/rtdata/languages/Espanol
index a202e2e47..3260d167c 100644
--- a/rtdata/languages/Espanol
+++ b/rtdata/languages/Espanol
@@ -1749,7 +1749,6 @@ TP_EPD_LABEL;Mapeo tonal
TP_EPD_REWEIGHTINGITERATES;Iteraciones de reponderación
TP_EPD_SCALE;Escala
TP_EPD_STRENGTH;Intensidad
-TP_EPD_TOOLTIP;El mapeo tonal puede hacerse en modo Lab (estándar) y en modo CIECAM02.\n\nPara activar mapeo tonal modo CIECAM02 haga los siguientes ajustes:\n1. CIECAM02\n2. Algoritmo="Brillo + Colorido (QM)"\n3. "Mapeo tonal usando Brillo CIECAM02 (Q)"
TP_EXPOSURE_AUTOLEVELS;Niveles automáticos
TP_EXPOSURE_AUTOLEVELS_TIP;Ejecuta Niveles Automáticos. Establece automáticamente los valores de los parámetros basándose en el análisis de la imagen.\nHabilita la reconstrucción de luces altas si es necesario
TP_EXPOSURE_BLACKLEVEL;Nivel de Negro
diff --git a/rtdata/languages/Euskara b/rtdata/languages/Euskara
index 12deea740..6d947cdd9 100644
--- a/rtdata/languages/Euskara
+++ b/rtdata/languages/Euskara
@@ -1411,7 +1411,7 @@ TP_WBALANCE_TEMPERATURE;Tenperatura
!THRESHOLDSELECTOR_T;Top
!THRESHOLDSELECTOR_TL;Top-left
!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_BWMIX_ALGO;Algorithm OYCPM
!TP_BWMIX_ALGO_LI;Linear
!TP_BWMIX_ALGO_SP;Special effects
@@ -1700,7 +1700,6 @@ TP_WBALANCE_TEMPERATURE;Tenperatura
!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
!TP_EPD_SCALE;Scale
!TP_EPD_STRENGTH;Strength
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
diff --git a/rtdata/languages/Francais b/rtdata/languages/Francais
index 9819b20a5..987774546 100644
--- a/rtdata/languages/Francais
+++ b/rtdata/languages/Francais
@@ -1632,7 +1632,6 @@ TP_EPD_LABEL;Compression tonale
TP_EPD_REWEIGHTINGITERATES;Itérations de la pondération
TP_EPD_SCALE;Échelle
TP_EPD_STRENGTH;Force
-TP_EPD_TOOLTIP;Vous pouvez choisir entre le mode Lab (standard) ou le mode CIECAM02.\n En activant "Compression tonale avec brillance Q CIECAM" dans le menu "Brillance + Niveau de couleur CIECAM"
TP_EXPOSURE_AUTOLEVELS;Niveaux Auto
TP_EXPOSURE_AUTOLEVELS_TIP;Bascule l'usage de Niveaux automatiques afin de régler automatiquement les valeurs basé sur l'analyse de l'image\nActive la Reconstruction des Hautes Lumières si nécessaire.
TP_EXPOSURE_BLACKLEVEL;Noir
diff --git a/rtdata/languages/Greek b/rtdata/languages/Greek
index d5cfc781c..eba373871 100644
--- a/rtdata/languages/Greek
+++ b/rtdata/languages/Greek
@@ -1410,7 +1410,7 @@ TP_WBALANCE_TEMPERATURE;Θερμοκρασία
!THRESHOLDSELECTOR_T;Top
!THRESHOLDSELECTOR_TL;Top-left
!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_BWMIX_ALGO;Algorithm OYCPM
!TP_BWMIX_ALGO_LI;Linear
!TP_BWMIX_ALGO_SP;Special effects
@@ -1699,7 +1699,6 @@ TP_WBALANCE_TEMPERATURE;Θερμοκρασία
!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
!TP_EPD_SCALE;Scale
!TP_EPD_STRENGTH;Strength
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
diff --git a/rtdata/languages/Hebrew b/rtdata/languages/Hebrew
index 75b3a3dd7..faa279860 100644
--- a/rtdata/languages/Hebrew
+++ b/rtdata/languages/Hebrew
@@ -1411,7 +1411,7 @@ TP_WBALANCE_TEMPERATURE;מידת חום
!THRESHOLDSELECTOR_T;Top
!THRESHOLDSELECTOR_TL;Top-left
!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_BWMIX_ALGO;Algorithm OYCPM
!TP_BWMIX_ALGO_LI;Linear
!TP_BWMIX_ALGO_SP;Special effects
@@ -1700,7 +1700,6 @@ TP_WBALANCE_TEMPERATURE;מידת חום
!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
!TP_EPD_SCALE;Scale
!TP_EPD_STRENGTH;Strength
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
diff --git a/rtdata/languages/Italiano b/rtdata/languages/Italiano
index 7e81ff386..0c0f66576 100644
--- a/rtdata/languages/Italiano
+++ b/rtdata/languages/Italiano
@@ -987,7 +987,6 @@ TP_EPD_LABEL;Tone Mapping
TP_EPD_REWEIGHTINGITERATES;Iterazioni di Ribilanciamento
TP_EPD_SCALE;Scala
TP_EPD_STRENGTH;Forza
-TP_EPD_TOOLTIP;Il Tone Mapping è possibile in modalità Lab (standard) o CIECAM02.\n\nPer utilizare il Tone Mapping CIECAM02 abilita quste impostazioni: \n 1. CIECAM02\n 2. Algoritmo="Brillanza + Pienezza (QM)"\n 3. "Tone mapping con CIECAM02"
TP_EXPOSURE_AUTOLEVELS;Livelli automatici
TP_EXPOSURE_AUTOLEVELS_TIP;Abilita l'esecuzione dei livelli automatici per impostare automaticamente il cursore Esposizione in base all'analisi dell'immagine.\nSe necessario, abilita Ricostruzione Alteluci.
TP_EXPOSURE_BLACKLEVEL;Livello del nero
@@ -1801,7 +1800,7 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: -
!SAVEDLG_SUBSAMP_TOOLTIP;Best compression:\nJ:a:b 4:2:0\nh/v 2/2\nChroma halved horizontally and vertically.\n\nBalanced:\nJ:a:b 4:2:2\nh/v 2/1\nChroma halved horizontally.\n\nBest quality:\nJ:a:b 4:4:4\nh/v 1/1\nNo chroma subsampling.
!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_BWMIX_MIXC;Channel Mixer
!TP_BWMIX_NEUTRAL;Reset
!TP_CBDL_AFT;After Black-and-White
diff --git a/rtdata/languages/Japanese b/rtdata/languages/Japanese
index a8ed3bc2b..ad8996907 100644
--- a/rtdata/languages/Japanese
+++ b/rtdata/languages/Japanese
@@ -1658,7 +1658,6 @@ TP_EPD_LABEL;トーンマッピング
TP_EPD_REWEIGHTINGITERATES;再加重反復
TP_EPD_SCALE;スケール
TP_EPD_STRENGTH;強さ
-TP_EPD_TOOLTIP;トーンマッピングは、L*a*b*モード(標準)またはCIECAM02モードを介して可能です\n\nL*a*b*モードの場合、トーンマッピングはウェーブレット機能の残差画像にも使えます\n\n CIECAM02トーンマッピングモードは以下の設定を有効にします:\n 1. CIECAM02\n 2. アルゴリズム="明るさ + 鮮やかさ (QM)"\n 3. "CIECAM02 明るさ(Q)でトーンマッピング"
TP_EXPOSURE_AUTOLEVELS;自動露光補正
TP_EXPOSURE_AUTOLEVELS_TIP;画像を解析し露光補正を自動で設定します
TP_EXPOSURE_BLACKLEVEL;黒レベル
diff --git a/rtdata/languages/Latvian b/rtdata/languages/Latvian
index b97aca446..83fd32895 100644
--- a/rtdata/languages/Latvian
+++ b/rtdata/languages/Latvian
@@ -1411,7 +1411,7 @@ TP_WBALANCE_TEMPERATURE;Temperatūra
!THRESHOLDSELECTOR_T;Top
!THRESHOLDSELECTOR_TL;Top-left
!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_BWMIX_ALGO;Algorithm OYCPM
!TP_BWMIX_ALGO_LI;Linear
!TP_BWMIX_ALGO_SP;Special effects
@@ -1700,7 +1700,6 @@ TP_WBALANCE_TEMPERATURE;Temperatūra
!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
!TP_EPD_SCALE;Scale
!TP_EPD_STRENGTH;Strength
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
diff --git a/rtdata/languages/Magyar b/rtdata/languages/Magyar
index 02d67437b..d13d6d5a4 100644
--- a/rtdata/languages/Magyar
+++ b/rtdata/languages/Magyar
@@ -1564,7 +1564,7 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés -
!THRESHOLDSELECTOR_T;Top
!THRESHOLDSELECTOR_TL;Top-left
!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_BWMIX_ALGO;Algorithm OYCPM
!TP_BWMIX_ALGO_LI;Linear
!TP_BWMIX_ALGO_SP;Special effects
@@ -1829,7 +1829,6 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés -
!TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image.
!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
!TP_EPD_GAMMA;Gamma
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
!TP_EXPOSURE_CURVEEDITOR2;Tone curve 2
diff --git a/rtdata/languages/Nederlands b/rtdata/languages/Nederlands
index 0f1fdff6e..225b3ecf4 100644
--- a/rtdata/languages/Nederlands
+++ b/rtdata/languages/Nederlands
@@ -1408,7 +1408,6 @@ TP_EPD_LABEL;Tonemapping (Lab/CIECAM02)
TP_EPD_REWEIGHTINGITERATES;Herhaling
TP_EPD_SCALE;Schaal
TP_EPD_STRENGTH;Sterkte
-TP_EPD_TOOLTIP;Tonemapping is mogelijk via Lab mode (standaard) of CIECAM02 mode.\n\nOm CIECAM02 Tonemapping mode te gebruiken moeten de volgende instellingen worden gekozen: \n1. CIECAM\n2. Algoritme="Helderheid + Kleurrijkheid (QM)"\n3. "Tonemapping gebruik makend van CIECAM02 helderheid (Q)"
TP_EXPOSURE_AUTOLEVELS;Autom. niveaus
TP_EXPOSURE_AUTOLEVELS_TIP;Activeer automatische niveaus\nActiveer Herstel Hoge lichten indien nodig.
TP_EXPOSURE_BLACKLEVEL;Schaduwen
diff --git a/rtdata/languages/Norsk BM b/rtdata/languages/Norsk BM
index ec695aac6..1fd3e18c1 100644
--- a/rtdata/languages/Norsk BM
+++ b/rtdata/languages/Norsk BM
@@ -1410,7 +1410,7 @@ TP_WBALANCE_TEMPERATURE;Temperatur
!THRESHOLDSELECTOR_T;Top
!THRESHOLDSELECTOR_TL;Top-left
!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_BWMIX_ALGO;Algorithm OYCPM
!TP_BWMIX_ALGO_LI;Linear
!TP_BWMIX_ALGO_SP;Special effects
@@ -1699,7 +1699,6 @@ TP_WBALANCE_TEMPERATURE;Temperatur
!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
!TP_EPD_SCALE;Scale
!TP_EPD_STRENGTH;Strength
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
diff --git a/rtdata/languages/Polish b/rtdata/languages/Polish
index 2a21b3836..916ea2b90 100644
--- a/rtdata/languages/Polish
+++ b/rtdata/languages/Polish
@@ -1085,7 +1085,6 @@ TP_EPD_LABEL;Tone Mapping
TP_EPD_REWEIGHTINGITERATES;Powtarzanie rozważania
TP_EPD_SCALE;Skala
TP_EPD_STRENGTH;Siła
-TP_EPD_TOOLTIP;Tone mapping może się odbyć w przestrzeni kolorów L*a*b* (domyślnie) oraz CIECAM02.\n\nAby wykonać tone mapping w przestrzeni CIECAM02 należy włączyć następujące ustawienia:\n1. CIECAM02\n2. Algorytm="Jasność + Barwistość (QM)"\n3. "Tone mapping za pomocą jasności CIECAM02 (Q)"
TP_EXPOSURE_AUTOLEVELS;Wyrównaj poziomy
TP_EXPOSURE_AUTOLEVELS_TIP;Dokonaj automatycznego ustawienia parametrów ekspozycji na podstawie analizy obrazu
TP_EXPOSURE_BLACKLEVEL;Czerń
@@ -1877,7 +1876,7 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: -
!SAVEDLG_SUBSAMP_TOOLTIP;Best compression:\nJ:a:b 4:2:0\nh/v 2/2\nChroma halved horizontally and vertically.\n\nBalanced:\nJ:a:b 4:2:2\nh/v 2/1\nChroma halved horizontally.\n\nBest quality:\nJ:a:b 4:4:4\nh/v 1/1\nNo chroma subsampling.
!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_BWMIX_MIXC;Channel Mixer
!TP_BWMIX_NEUTRAL;Reset
!TP_CBDL_AFT;After Black-and-White
diff --git a/rtdata/languages/Polish (Latin Characters) b/rtdata/languages/Polish (Latin Characters)
index 7889a83cf..6b18c604e 100644
--- a/rtdata/languages/Polish (Latin Characters)
+++ b/rtdata/languages/Polish (Latin Characters)
@@ -1085,7 +1085,6 @@ TP_EPD_LABEL;Tone Mapping
TP_EPD_REWEIGHTINGITERATES;Powtarzanie rozwazania
TP_EPD_SCALE;Skala
TP_EPD_STRENGTH;Sila
-TP_EPD_TOOLTIP;Tone mapping moze sie odbyc w przestrzeni kolorow L*a*b* (domyslnie) oraz CIECAM02.\n\nAby wykonac tone mapping w przestrzeni CIECAM02 nalezy wlaczyc nastepujace ustawienia:\n1. CIECAM02\n2. Algorytm="Jasnosc + Barwistosc (QM)"\n3. "Tone mapping za pomoca jasnosci CIECAM02 (Q)"
TP_EXPOSURE_AUTOLEVELS;Wyrownaj poziomy
TP_EXPOSURE_AUTOLEVELS_TIP;Dokonaj automatycznego ustawienia parametrow ekspozycji na podstawie analizy obrazu
TP_EXPOSURE_BLACKLEVEL;Czern
@@ -1877,7 +1876,7 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrot: -
!SAVEDLG_SUBSAMP_TOOLTIP;Best compression:\nJ:a:b 4:2:0\nh/v 2/2\nChroma halved horizontally and vertically.\n\nBalanced:\nJ:a:b 4:2:2\nh/v 2/1\nChroma halved horizontally.\n\nBest quality:\nJ:a:b 4:4:4\nh/v 1/1\nNo chroma subsampling.
!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_BWMIX_MIXC;Channel Mixer
!TP_BWMIX_NEUTRAL;Reset
!TP_CBDL_AFT;After Black-and-White
diff --git a/rtdata/languages/Portugues (Brasil) b/rtdata/languages/Portugues (Brasil)
index f5a72cb4c..1b25b43dc 100644
--- a/rtdata/languages/Portugues (Brasil)
+++ b/rtdata/languages/Portugues (Brasil)
@@ -1550,7 +1550,6 @@ TP_EPD_LABEL;Mapeamento de Tom
TP_EPD_REWEIGHTINGITERATES;Reponderando iterações
TP_EPD_SCALE;Escala
TP_EPD_STRENGTH;Intensidade
-TP_EPD_TOOLTIP;O mapeamento de tom é possível no modo L*a*b* (padão) e no modo CIECAM02.\n\nQuando no modo L*a*b*, o mapeamento de tom também pode ser usado na imagem residual da ferramenta de Níveis de Wavelet.\n\nPara ativar o modo de mapeamento de tom CIECAM02, habilite as seguintes configurações:\n1. CIECAM02\n2. Algorítimo = "Brilho + Colorido (QM)"\n3. "Mapeamento de tom usando o brilho do CIECAM02 (Q)"
TP_EXPOSURE_AUTOLEVELS;Níveis Automáticos
TP_EXPOSURE_AUTOLEVELS_TIP;Alterna a execução dos Níveis Automáticos para definir automaticamente os valores do controle deslizante de Exposição baseado numa análise de imagem.\nHabilita a Reconstrução de Realce se necessário.
TP_EXPOSURE_BLACKLEVEL;Preto
diff --git a/rtdata/languages/Russian b/rtdata/languages/Russian
index 584f10d45..b440470a3 100644
--- a/rtdata/languages/Russian
+++ b/rtdata/languages/Russian
@@ -1133,7 +1133,6 @@ TP_EPD_LABEL;Тональная компрессия
TP_EPD_REWEIGHTINGITERATES;Перевзвешивание проходов
TP_EPD_SCALE;Масштаб
TP_EPD_STRENGTH;Интенсивность
-TP_EPD_TOOLTIP;Тональная компрессия возможна в режиме L*a*b* (по умолчанию) и CIECAM02.\nВ режиме L*a*b* тональная компрессия также может быть использована для остаточного изображения Вейвлетов.\n\n.Для использования модели тональной компрессии CIECAM02 включите следующие настройки:\n1. CIECAM02\n2. Алгоритм Яркость+Красочность (QM)\n3. Тональная компрессия, использующая яркость CIECAM02 (Q).
TP_EXPOSURE_AUTOLEVELS;Автоуровни
TP_EXPOSURE_AUTOLEVELS_TIP;Переключение выполнения автоуровней для автоматической установки параметров экспозиции на основе анализа изображения
TP_EXPOSURE_BLACKLEVEL;Уровень чёрного
@@ -1881,7 +1880,7 @@ ZOOMPANEL_ZOOMOUT;Отдалить\nГорячая клавиша: -
!SAVEDLG_SUBSAMP_TOOLTIP;Best compression:\nJ:a:b 4:2:0\nh/v 2/2\nChroma halved horizontally and vertically.\n\nBalanced:\nJ:a:b 4:2:2\nh/v 2/1\nChroma halved horizontally.\n\nBest quality:\nJ:a:b 4:4:4\nh/v 1/1\nNo chroma subsampling.
!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_CBDL_AFT;After Black-and-White
!TP_CBDL_BEF;Before Black-and-White
!TP_CBDL_METHOD;Process located
diff --git a/rtdata/languages/Serbian (Cyrilic Characters) b/rtdata/languages/Serbian (Cyrilic Characters)
index cd8d6e640..d6e357068 100644
--- a/rtdata/languages/Serbian (Cyrilic Characters)
+++ b/rtdata/languages/Serbian (Cyrilic Characters)
@@ -944,7 +944,6 @@ TP_EPD_LABEL;Мапирање тонова
TP_EPD_REWEIGHTINGITERATES;Број поновних мерења
TP_EPD_SCALE;Размера
TP_EPD_STRENGTH;Јачина
-TP_EPD_TOOLTIP;Мапирање тонова је могуће у Лаб (стандардном) или CIECAM02 режиму.\n\nЗа рад у CIECAM02 режиму укључите:\n1. CIECAM02\n2. Алгоритам="Осветљење + живописност (QM)"\n3. "Мапирање тонова у CIECAM02 осветљењу (Q)"
TP_EXPOSURE_AUTOLEVELS;Ауто-нивои
TP_EXPOSURE_AUTOLEVELS_TIP;Омогућава аутоматско одређивање нивоа, који подешава клизаче експозиције на основу податка о самој слици.\nУкључује чупање светлих делова уколико је неопходно.
TP_EXPOSURE_BLACKLEVEL;Црна
@@ -1789,7 +1788,7 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике -
!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
!THRESHOLDSELECTOR_BL;Bottom-left
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_BWMIX_FILTER_TOOLTIP;The color filter simulates shots taken with a colored filter placed in front of the lens. Colored filters reduce the transmission of specific color ranges and therefore affect their lightness. E.g. a red filter darkens blue skies.
!TP_BWMIX_FILTER_YELLOW;Yellow
!TP_BWMIX_GAMMA;Gamma Correction
diff --git a/rtdata/languages/Serbian (Latin Characters) b/rtdata/languages/Serbian (Latin Characters)
index 664894021..4d833d202 100644
--- a/rtdata/languages/Serbian (Latin Characters)
+++ b/rtdata/languages/Serbian (Latin Characters)
@@ -944,7 +944,6 @@ TP_EPD_LABEL;Mapiranje tonova
TP_EPD_REWEIGHTINGITERATES;Broj ponovnih merenja
TP_EPD_SCALE;Razmera
TP_EPD_STRENGTH;Jačina
-TP_EPD_TOOLTIP;Mapiranje tonova je moguće u Lab (standardnom) ili CIECAM02 režimu.\n\nZa rad u CIECAM02 režimu uključite:\n1. CIECAM02\n2. Algoritam="Osvetljenje + živopisnost (QM)"\n3. "Mapiranje tonova u CIECAM02 osvetljenju (Q)"
TP_EXPOSURE_AUTOLEVELS;Auto-nivoi
TP_EXPOSURE_AUTOLEVELS_TIP;Omogućava automatsko određivanje nivoa, koji podešava klizače ekspozicije na osnovu podatka o samoj slici.\nUključuje čupanje svetlih delova ukoliko je neophodno.
TP_EXPOSURE_BLACKLEVEL;Crna
@@ -1789,7 +1788,7 @@ ZOOMPANEL_ZOOMOUT;Umanjuje prikaz slike -
!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
!THRESHOLDSELECTOR_BL;Bottom-left
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_BWMIX_FILTER_TOOLTIP;The color filter simulates shots taken with a colored filter placed in front of the lens. Colored filters reduce the transmission of specific color ranges and therefore affect their lightness. E.g. a red filter darkens blue skies.
!TP_BWMIX_FILTER_YELLOW;Yellow
!TP_BWMIX_GAMMA;Gamma Correction
diff --git a/rtdata/languages/Slovak b/rtdata/languages/Slovak
index 1319912db..0ceeab884 100644
--- a/rtdata/languages/Slovak
+++ b/rtdata/languages/Slovak
@@ -1450,7 +1450,7 @@ ZOOMPANEL_ZOOMOUT;Oddialiť -
!THRESHOLDSELECTOR_T;Top
!THRESHOLDSELECTOR_TL;Top-left
!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_BWMIX_ALGO;Algorithm OYCPM
!TP_BWMIX_ALGO_LI;Linear
!TP_BWMIX_ALGO_SP;Special effects
@@ -1729,7 +1729,6 @@ ZOOMPANEL_ZOOMOUT;Oddialiť -
!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
!TP_EPD_SCALE;Scale
!TP_EPD_STRENGTH;Strength
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
diff --git a/rtdata/languages/Suomi b/rtdata/languages/Suomi
index 6ca4406d8..3c3cdc6c5 100644
--- a/rtdata/languages/Suomi
+++ b/rtdata/languages/Suomi
@@ -1411,7 +1411,7 @@ TP_WBALANCE_TEMPERATURE;Lämpötila [K]
!THRESHOLDSELECTOR_T;Top
!THRESHOLDSELECTOR_TL;Top-left
!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_BWMIX_ALGO;Algorithm OYCPM
!TP_BWMIX_ALGO_LI;Linear
!TP_BWMIX_ALGO_SP;Special effects
@@ -1700,7 +1700,6 @@ TP_WBALANCE_TEMPERATURE;Lämpötila [K]
!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
!TP_EPD_SCALE;Scale
!TP_EPD_STRENGTH;Strength
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
diff --git a/rtdata/languages/Swedish b/rtdata/languages/Swedish
index 868e609bb..5032496a3 100644
--- a/rtdata/languages/Swedish
+++ b/rtdata/languages/Swedish
@@ -1281,7 +1281,6 @@ TP_EPD_LABEL;Tonmappning
TP_EPD_REWEIGHTINGITERATES;Återviktade iterationer
TP_EPD_SCALE;Skala
TP_EPD_STRENGTH;Styrka
-TP_EPD_TOOLTIP;Tonmappning är möjligt via Lab-läge (standard) och CIECAM02-läge.\n\nFör att aktivera CIECAM02- tonmappningsläget, aktivera följande:\n1. CIECAM02\n2. Algoritm="Intensitet + Färgmättnad (QM)"\n3. "Tonmappning mha CIECAM02 intensitet (Q)"
TP_EXPOSURE_AUTOLEVELS;Autonivåer
TP_EXPOSURE_AUTOLEVELS_TIP;Slå av/på autonivåer för att automatiskt beräkna och använda värden baserat på bildanalys\nAktiverar högdageråterställning om nödvändigt
TP_EXPOSURE_BLACKLEVEL;Svärta
diff --git a/rtdata/languages/Turkish b/rtdata/languages/Turkish
index a9d3e9d5e..39302869d 100644
--- a/rtdata/languages/Turkish
+++ b/rtdata/languages/Turkish
@@ -1410,7 +1410,7 @@ TP_WBALANCE_TEMPERATURE;Isı
!THRESHOLDSELECTOR_T;Top
!THRESHOLDSELECTOR_TL;Top-left
!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: shift+right-click.\n- Revert to hand tool: right-click.
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
!TP_BWMIX_ALGO;Algorithm OYCPM
!TP_BWMIX_ALGO_LI;Linear
!TP_BWMIX_ALGO_SP;Special effects
@@ -1699,7 +1699,6 @@ TP_WBALANCE_TEMPERATURE;Isı
!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
!TP_EPD_SCALE;Scale
!TP_EPD_STRENGTH;Strength
-!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
diff --git a/rtdata/languages/default b/rtdata/languages/default
index dc5f85156..50a9aee2b 100644
--- a/rtdata/languages/default
+++ b/rtdata/languages/default
@@ -1309,7 +1309,7 @@ THRESHOLDSELECTOR_HINT;Hold the Shift key to move individual control poin
THRESHOLDSELECTOR_T;Top
THRESHOLDSELECTOR_TL;Top-left
THRESHOLDSELECTOR_TR;Top-right
-TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: control+shift+right-click.\n- Revert to hand tool: right-click outside any picker.
+TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
TOOLBAR_TOOLTIP_CROP;Crop selection.\nShortcut: c\nMove the crop using Shift+mouse drag.
TOOLBAR_TOOLTIP_HAND;Hand tool.\nShortcut: h
TOOLBAR_TOOLTIP_STRAIGHTEN;Straighten / fine rotation.\nShortcut: s\n\nIndicate the vertical or horizontal by drawing a guide line over the image preview. Angle of rotation will be shown next to the guide line. Center of rotation is the geometrical center of the image.
@@ -1625,7 +1625,6 @@ TP_EPD_LABEL;Tone Mapping
TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
TP_EPD_SCALE;Scale
TP_EPD_STRENGTH;Strength
-TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
TP_EXPOSURE_AUTOLEVELS;Auto Levels
TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
TP_EXPOSURE_BLACKLEVEL;Black
diff --git a/rtgui/epd.cc b/rtgui/epd.cc
index 681248994..675a5b9b9 100644
--- a/rtgui/epd.cc
+++ b/rtgui/epd.cc
@@ -26,8 +26,6 @@ using namespace rtengine::procparams;
EdgePreservingDecompositionUI::EdgePreservingDecompositionUI () : FoldableToolPanel(this, "epd", M("TP_EPD_LABEL"), true, true)
{
- setEnabledTooltipMarkup(M("TP_EPD_TOOLTIP"));
-
strength = Gtk::manage(new Adjuster (M("TP_EPD_STRENGTH"), -1.0, 2.0, 0.01, 0.5));
gamma = Gtk::manage(new Adjuster (M("TP_EPD_GAMMA"), 0.8, 1.5, 0.01, 1.));
edgeStopping = Gtk::manage(new Adjuster (M("TP_EPD_EDGESTOPPING"), 0.1, 4.0, 0.01, 0.5));