* Various change to fit label in left tool panel
* Increase size left panel from 460 to 465
* Various improvment to reduce size left panel
* Others changes to reduce left panel labels
* Increase default size right panel
* Set right panel ajustable to size font
* Others small changes to mask
* Others small modifications
* change a litlle GUI - curveeditorgroup.cc - suppress curves u=in mask and reduce size right panel
* Added : to various curves label
* Others : labels curves
* Some adjustments labels sizefonts
* Change 2 forgotten length labels in denoise
* Others improvments labels
* Others labels change for retinex
* Others change labels - thanks to Wayne Sutton
* French change label length
* Change labels Wavelet levels - LA retinex - LA color and lights - and others
* Other change to mask blur
* Change box - Flowbox - thanks to Beep6581
* Adapt size box basic..advanced with size font
* Restore curveditorgroup : - change some labels and tooltips
* Remove some ':' - change and adapt labels tooltip wavelet levels
* Change flowbox for complexity under label
* Restore right panel and options to default values
* Change a label in wavelet level denoise
* Change in mask curves L(L) by L C(C) by C
* Small change labels denoise to fit in width right panel
* Others changes to GUi and labels to fit in right panel
* First change tooltips and french
* Second change tooltips
* Change tooltip mask denoise
TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Courbe de chrominance
TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Courbe de chrominance:
TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Augmente (multiplie) la valeur de tous les curseurs de chrominance.\nCette courbe vous permet d'ajuster la force de la réduction de bruit chromatique en fonction de la chromaticité, par exemple pour augmenter l'action dans les zones faiblement saturées et pour la diminuer dans celles très saturées.
TP_DIRPYRDENOISE_CHROMINANCE_METHODADVANCED_TOOLTIP;Manuel\nAgit sur l'image entière.\nVous controlez les paramètres de réduction de bruit manuellement.\n\nGlobal automatique\nAgit sur l'image entière.\n9 zones sont utilisées pour calculer un réglage de réduction de bruit de chroma.\n\nAperçu\nAgit sur l'image entière.\nLa partie visible de l'image dans l'aperçu est utilisé pour calculer un réglage de réduction de bruit de chroma.
TP_DIRPYRDENOISE_CHROMINANCE_METHOD_TOOLTIP;Manuel\nAgit sur l'image entière.\nVous controlez les paramètres de réduction de bruit manuellement.\n\nGlobal automatique\nAgit sur l'image entière.\n9 zones sont utilisées pour calculer un réglage de réduction de bruit de chroma.\n\nAutomatique multi-zones\nPas d'aperçu - ne fonctionne que lors de l'enregistrement, mais utiliser la méthode "Aperçu" en faisant correspondre la taille et le centre de la tuile à la taille et au centre de l'aperçu, vous permet d'avoir une idée des résultats attendus.\nL'image est divisé en tuiles (entre 10 et 70 en fonction de la taille de l'image) et chaque tuile reçoit son propre réglage de réduction de bruit de chrominance.\n\nAperçu\nAgit sur l'image entière.\nLa partie de l'image visible dans l'aperçu est utilisé pour calculer un réglage de réduction de bruit de chroma.
@ -1538,7 +1538,7 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Taille des tuiles =%1, Centre: Tx=
TP_LOCALLAB_BLENDMASK_TOOLTIP;Si fusion = 0 seule la détection de forme est améliorée.\nSi fusion > 0 le masque est ajouté à l'image. Si fusion < 0 le masque est soustrait à l'image
TP_LOCALLAB_BLENDMASKMASK_TOOLTIP;Si ce curseur = 0 pas d'action.\nAjoute ou soustrait le masque de l'image originale
TP_LOCALLAB_CBDLCLARI_TOOLTIP;Ajuste les tons moyens et les réhausse.
TP_LOCALLAB_CBDL_ADJ_TOOLTIP;Agit comme un outil ondelettes.\nLe premier niveau (0) agit sur des détails de 2x2.\nLe dernier niveau (5) agit sur des détails de 64x64.
TP_LOCALLAB_CBDL_THRES_TOOLTIP;Empêche d'augmenter le bruit
TP_LOCALLAB_CBDL_TOOLNAME;Contraste par niveaux de détail - 2
TP_LOCALLAB_CENTER_X;Centre X
TP_LOCALLAB_CENTER_Y;Centre Y
TP_LOCALLAB_CH;Courbes CL - LC
TP_LOCALLAB_CH;CL - LC
TP_LOCALLAB_CHROMA;Chrominance
TP_LOCALLAB_CHROMABLU;Niveaux Chroma
TP_LOCALLAB_CHROMABLU_TOOLTIP;Agit comme un amplificateur-reducteur d'action en comparant aux réglages de luma.\nEn dessous de 1 reduit, au dessus de 1 amplifie
@ -1824,7 +1824,7 @@ TP_LOCALLAB_CHRRT;Chroma
TP_LOCALLAB_CIRCRADIUS;Taille Spot
TP_LOCALLAB_CIRCRAD_TOOLTIP;Contient les références du RT-spot, utile pour la détection de forme (couleur, luma, chroma, Sobel).\nLes faibles valeurs peuvent être utiles pour les feuillages.\nLes valeurs élevées peuvent être utile pour la peau
TP_LOCALLAB_CLARICRES;Fusion Chroma
TP_LOCALLAB_CLARIFRA;Clarté & Masque de netteté - Fusion & adoucir images
TP_LOCALLAB_CLARISOFT_TOOLTIP;Actif pour Clarté et Masque de netteté si différent de zéro.\n\nActif pour toutes les pyramides ondelettes.\nInactif si rayon = 0
@ -1832,7 +1832,7 @@ TP_LOCALLAB_CLARITYML;Clarté
TP_LOCALLAB_CLARI_TOOLTIP;En dessous ou égal à 4, 'Masque netteté' est actif.\nAu dessus du niveau ondelettes 5 'Clarté' est actif.\nUtilesu=i vous utilisez 'Compression dynamique des niveaux'
TP_LOCALLAB_COLORDEPREV_TOOLTIP;Bouton Prévisualisation ΔE a besoin qu'un seul outil soit activé (expander).\nPour pouvoir avoir une Prévisualisation ΔE avec plusieurs outils activés utiliser Masque et modifications - Prévisualisation ΔE
TP_LOCALLAB_COLORDE_TOOLTIP;Affiche la prévisualisation ΔE en bleu si négatif et en vert si positif.\n\nMasque et modifications (montre modifications sans masque): montre les modifications réelles si positf, montre les modifications améliorées (luminance seule) en bleu et jaune si négatif.
TP_LOCALLAB_CURVEEDITOR_CC_TOOLTIP;Si la courbe est au sommet, le masque est compétement noir aucune transformation n'est réalisée par le masque sur l'image.\nQuand vous descendez la courbe, progressivement le masque va se colorer et s'éclaicir, l'image change de plus en plus.\n\nIl est recommendé (pas obligatoire) de positionner le sommet des courbes curves sur la ligne de transition grise qui représnte les références (chroma, luma, couleur).
@ -1892,9 +1892,9 @@ TP_LOCALLAB_DENOIEQUALCHRO_TOOLTIP;Equilibre l'action de denoise chrominance ent
TP_LOCALLAB_DENOIBILAT_TOOLTIP;Traite le bruit d'impulsion (poivre et sel)
TP_LOCALLAB_FEATH_TOOLTIP;Largeur du Gradient en porcentage de la diagonale du Spot\nUtilisé par tous les Filtres Gradués dans tous les outils.\nPas d'action si les filtres gradués ne sont pas utilisés.
TP_LOCALLAB_FFTMASK_TOOLTIP;Utilise une transformée de Fourier pour une meilleure qualité (accroit le temps de traitement et le besoin en mémoire)
TP_LOCALLAB_FFTW;ƒ - Utilise Fast Fourier Transform
TP_LOCALLAB_FFTW2;ƒ - Utilise Fast Fourier Transform (TIF, JPG,..)
TP_LOCALLAB_FFTWBLUR;ƒ - Utilise toujours Fast Fourier Transform
TP_LOCALLAB_FULLIMAGE;Calcule les valeurs Noir Ev - Blanc Ev - sur l'image entière
TP_LOCALLAB_FULLIMAGE;Calcule les valeurs NoirEv-blancEv - image entière
TP_LOCALLAB_FULLIMAGELOG_TOOLTIP;Calcule les valeurs Ev sur l'image entière.
TP_LOCALLAB_GAM;Gamma
TP_LOCALLAB_GAMFRA;Courbe Réponse Tonale (TRC)
@ -1999,7 +1999,7 @@ TP_LOCALLAB_GUIDSTRBL_TOOLTIP;Force du filtre guidé
TP_LOCALLAB_GUIDEPSBL_TOOLTIP;Détail - agit sur la répartition du filtre guidé, les valeurs négatives simulent un flou gaussien
TP_LOCALLAB_HHMASK_TOOLTIP;Ajustements fin de la teinte par exemple pour la peau.
TP_LOCALLAB_HIGHMASKCOL;Hautes lumières masque
TP_LOCALLAB_HLH;Courbes H
TP_LOCALLAB_HLH;H
TP_LOCALLAB_IND;Independant (souris)
TP_LOCALLAB_INDSL;Independant (souris + curseurs)
TP_LOCALLAB_INVERS;Inverse
@ -2024,7 +2024,7 @@ TP_LOCALLAB_LC_FFTW_TOOLTIP;FFT améliore la qualité et autorise de grands rayo
TP_LOCALLAB_LC_TOOLNAME;Constraste Local & Ondelettes - 7
TP_LOCALLAB_LEVELBLUR;Maximum Flouter
TP_LOCALLAB_LEVELLOCCONTRAST_TOOLTIP;En abscisse le contraste local (proche du concept de luminance). En ordonnée, amplification ou reduction du contraste local.
TP_LOCALLAB_LEVELWAV;Ψ Ondelettes Niveaux
TP_LOCALLAB_LEVELWAV;Ondelettes Niveaux
TP_LOCALLAB_LEVELWAV_TOOLTIP;Le niveau est automatiquement adapté à la taille du spot et de la prévisualisation.\nDu niveau 9 taille max 512 jusqu'au niveau 1 taille max = 4
TP_LOCALLAB_LEVFRA;Niveaux
TP_LOCALLAB_LIGHTNESS;Luminosité
@ -2036,11 +2036,11 @@ TP_LOCALLAB_LIST_TOOLTIP;Vous pouvez choisir 3 niveaux de complexité pour chaqu
TP_LOCALLAB_LMASK_LEVEL_TOOLTIP;Donne priorité à l'action sur les tons moyens et hautes lumières en choisissant les niveaux concernés d'ondelettes
TP_LOCALLAB_LMASK_LL_TOOLTIP;Vous permet de modifier librement le contraste du masque. Peut amener de artefacts.
TP_LOCALLAB_LOCCONT;Masque Flou
TP_LOCALLAB_LOC_CONTRAST;Contraste Local & Ondelettes
TP_LOCALLAB_LOC_CONTRASTPYR;Ψ Pyramide 1:
TP_LOCALLAB_LOC_CONTRASTPYR2;Ψ Pyramide 2:
TP_LOCALLAB_LOC_CONTRASTPYR2LAB; Contr. par niveaux- TM - Cont.Dir.
@ -2077,9 +2077,9 @@ TP_LOCALLAB_LOGSRCGREY_TOOLTIP;Estime la valeur du point gris de l'image, tôt d
TP_LOCALLAB_LOGTARGGREY_TOOLTIP;Vous pouvez changer cette valeur pour l'adapter à votre goût.
TP_LOCALLAB_LOG_TOOLNAME;Codage log - 0
TP_LOCALLAB_LOGVIEWING_TOOLTIP;Correspond au medium sur lequel l'image finale sera vue (moniteur, TV, projecteur, imprimante,..), ainsi que son environnement.
TP_LOCALLAB_LUM;Courbes LL - CC
TP_LOCALLAB_LUM;LL - CC
TP_LOCALLAB_LUMADARKEST;Plus Sombre
TP_LOCALLAB_LUMASK;Maqsue Luminance arrière plan
TP_LOCALLAB_LUMASK;Masque Luminance arrière plan
TP_LOCALLAB_LUMASK_TOOLTIP;Ajuste le gris de l'arrière plan du masque dans Montrer Masque (Masque et modifications)
TP_LOCALLAB_LUMAWHITESEST;Plus clair
TP_LOCALLAB_LUMONLY;Luminance seulement
@ -2093,12 +2093,12 @@ TP_LOCALLAB_MASK;Masque
TP_LOCALLAB_MASK2;Courbe de Contraste
TP_LOCALLAB_MASKCOL;Masque Courbes
TP_LOCALLAB_MASKCURVE_TOOLTIP;Si la courbe est au sommet, le masque est compétement noir aucune transformation n'est réalisée par le masque sur l'image.\nQuand vous descendez la courbe, progressivement le masque va se colorer et s'éclaicir, l'image change de plus en plus.\n\nIl est recommendé (pas obligatoire) de positionner le sommet des courbes curves sur la ligne de transition grise qui représnte les références (chroma, luma, couleur).
TP_LOCALLAB_MASKLC_TOOLTIP;Vous autorise à cibler le de-bruite en se basant sur les informations du masque dans L(L) ou LC(H) (Masque et Modifications).\n Les masques L(L) ou LC(H) doivent être activés pour utiliser cette fonction.\n si le masque est très sombre - sous le seuil 'sombre' - de-bruite sera accru si renforce > 1.\n si le masque est clair - au-dessus du seuil 'clair' - de-bruite sera progressivement réduit.\n entre les deux, de-bruite sera maintenu aux réglages sans masques.
TP_LOCALLAB_MASKLCTHR;Seuil luminance zones claires
TP_LOCALLAB_MASKLCTHRLOW;Seuil luminance zones sombres
TP_LOCALLAB_MASKLNOISELOW;Renforce de-bruite zones sombres et claires
TP_LOCALLAB_MASKDE_TOOLTIP;Utilisé pour diriger l'action de de-bruite basé sur les informations des courbes masques L(L) ou LC(H) (Masque et modifications).\n Les masques L(L) ou LC(H) doivent être activés pour utiliser cette fonction.\n Si le masque est en dessous du seuil sombre le De-bruite sera appliqué progressivement.\n Si le masque est au-dessus du seuil 'clair', le De-bruite sera appliqué progressivement.\n Entre les deux, les réglages sans De-bruite seront maintenus, sauf si vous agissez sur les curseurs "Zones grise dé-bruite luminance" or "Zones grise de-bruite chrominance".
TP_LOCALLAB_MLABEL;Récupère les données Min=%1 Max=%2 (Clip - décalage)
TP_LOCALLAB_MLABEL;Réc. données Min=%1 Max=%2
TP_LOCALLAB_MLABEL_TOOLTIP;'Doit être' près de min=0 max=32768 (log mode) mais d'autres valeurs sont possibles.\nVous pouvez agir sur les données récupérées (CLIP) et décalage pour normaliser.\n\nRécupère les données image sans mélange.
TP_LOCALLAB_MODE_EXPERT;Avancé
TP_LOCALLAB_MODE_NORMAL;Standard
@ -2204,12 +2204,12 @@ TP_LOCALLAB_NLRAD;Taille maximum du rayon
TP_LOCALLAB_NOISE_TOOLTIP;Ajoute du bruit de luminance
TP_LOCALLAB_NOISECHROCOARSE;Chroma gros (Ond)
TP_LOCALLAB_NOISECHROC_TOOLTIP;Si supérieur à zéro, algorithme haute qualité est activé.\nGros est sélectionné si curseur >=0.2
TP_LOCALLAB_NOISECHRODETAIL;Récupération des détails Chroma (DCT ƒ)
TP_LOCALLAB_SHADOWHIGHLIGHT_TOOLTIP;Peut être utilisé - ou en complement - du module Exposition dans les cas difficiles.\nUtiliser réduction du bruit Denoise peut être nécessaire : éclaicir les ombres.\n\nPeut être utilisé comme un filtre gradué (augmenter Etendue)
TP_LOCALLAB_SHAMASKCOL;Ombres
TP_LOCALLAB_SHADMASK_TOOLTIP;Relève les ombres du masque de la même manière que l'algorithme "ombres/lumières"
@ -2331,7 +2331,7 @@ TP_LOCALLAB_SHOWMODIF;Montrer modifications sans masque
TP_LOCALLAB_SHOWMODIF2;Montrer modifications
TP_LOCALLAB_SHOWMODIFMASK;Montrer modifications avec masque
TP_LOCALLAB_SHOWNORMAL;Normalise luminance (non)
TP_LOCALLAB_SHOWPLUS;Masque et modifications - Adoucir-flouter & De-bruite
TP_LOCALLAB_SHOWPLUS;Masque et modifications
TP_LOCALLAB_SHOWPOISSON;Poisson (pde ƒ)
TP_LOCALLAB_SHOWR;Masque et modifications
TP_LOCALLAB_SHOWREF;Prévisualisation ΔE
@ -2348,7 +2348,7 @@ TP_LOCALLAB_SIM;Simple
TP_LOCALLAB_SLOMASKCOL;Pente (slope)
TP_LOCALLAB_SLOMASK_TOOLTIP;Gamma et Pente (Slope) autorise une transformation du masque en douceur et sans artefacts en modifiant progressivement "L" pour éviter les discontinuité.
TP_LOCALLAB_SLOSH;Pente
TP_LOCALLAB_SOFT;Lumière douce - Original Retinex
TP_LOCALLAB_SOFT;Lumière douce/Orig. Retinex
TP_LOCALLAB_SOFTM;Lumière douce (soft light)
TP_LOCALLAB_SOFTMETHOD_TOOLTIP;Applique un mélange Lumière douce. Effectue une émulation de "dodge and burn" en utilisant l'algorithme original de retinex.
TP_LOCALLAB_TLABEL_TOOLTIP;Transmission map result.\nMin and Max are used by Variance.\nTm=Min TM=Max of Transmission Map.\nYou can act on Threshold to normalize
TP_LOCALLAB_TM;Compression tonale - Texture
TP_LOCALLAB_TM;Compression tonale
TP_LOCALLAB_TM_MASK;Utilise transmission map
TP_LOCALLAB_TONEMAPESTOP_TOOLTIP;Ce paramètre affecte la sensibilité aux bords.\n Plus grand il est, plus la luminosité change peut être considéré comme un bord.\n Si réglé à zéro 'compression tonale' va avoir un effet similaire à masque flou.
TP_LOCALLAB_TONEMAPGAM_TOOLTIP;Gamma déplace l'action de 'compression tonale' des ombres vers les lumières.
TP_LOCALLAB_TRANSITWEAK_TOOLTIP;Ajuste l'affaiblissement de la transition : change le processus d'affaiblissement - 1 linéaire - 2 parabolique - 3 cubique - ^25.\nPeut être utilisé en conjonction avec de très faibles valeurs de transition pour traiter/réduire les défauts (CBDL, Ondelettes, Couleur et lumière)
TP_LOCALLAB_TRANSIT_TOOLTIP;Ajuste la progressions de la transition enttre les zones affectées ou non affectées, comme un pourcentage du "rayon"
TP_LOCALLAB_VIS_TOOLTIP;<b>Click</b> pour montrer/cacher le Spot sélectionné.\n<b>Ctrl</b>+<b>click</b> pour montrer/cacher tous les Spot.
TP_LOCALLAB_WAMASKCOL;Ψ Niveau Ondelettes
TP_LOCALLAB_WAMASKCOL;Niveau Ondelettes
TP_LOCALLAB_WARM;Chaud - Froid & Artefacts de couleur
TP_LOCALLAB_WARM_TOOLTIP;Ce curseur utilise l'algorithme Ciecam et agit comme une Balance des blancs, il prut réchauffer ou refroidir cool la zone concernée.\nIl peut aussi dans certains réduire les artefacts colorés.
TP_LOCALLAB_WASDEN_TOOLTIP;De-bruite luminance pour les 3 premiers niveaux (fin).\nLa limite droite de la courbe correspond à gros : niveau 3 et au delà.
@ -2465,18 +2465,18 @@ TP_LOCALLAB_WAVCOMPRE_TOOLTIP;Réalise un 'Tone-mapping' ou une réduction du co
TP_LOCALLAB_WAVCOMP_TOOLTIP;Réalise un contrast local en fonction de la direction de la décomposition en ondelettes : horizontal, vertical, diagonal
TP_LOCALLAB_WAVCON;Contraste par niveau
TP_LOCALLAB_WAVCONTF_TOOLTIP;Similaire à Contrast By Detail Levels : en abscisse niveaux.
TP_LOCALLAB_WAVDEN;de-bruite luminance par niveau (0 1 2 -3 et plus)
TP_LOCALLAB_WAVE;Ψ Ondelette
TP_LOCALLAB_WAVDEN;de-bruite lum. par niveau
TP_LOCALLAB_WAVE;Ondelette
TP_LOCALLAB_WAVEDG;Contrast Local
TP_LOCALLAB_WAVEEDG_TOOLTIP;Améliore la netteté prenant en compte la notion de "ondelettes bords".\nNécessite au moins que les 4 premiers niveaux sont utilisables
TP_LOCALLAB_WAVGRAD_TOOLTIP;Filtre gradué pour Contraste local "luminance"
TP_LOCALLAB_WAVHIGH;Ψ Ondelette haut
TP_LOCALLAB_WAVLEV;Flouter par niveau
TP_LOCALLAB_WAVLOW;Ψ Ondelette bas
TP_LOCALLAB_WAVMASK;Ψ Niveau contraste local
TP_LOCALLAB_WAVHIGH;Ondelette haut
TP_LOCALLAB_WAVLEV;Flou par niveau
TP_LOCALLAB_WAVLOW;Ondelette bas
TP_LOCALLAB_WAVMASK;Contr. local (par niveau)
TP_LOCALLAB_WAVEMASK_LEVEL_TOOLTIP;Amplitude des niveaux d'ondelettes utilisés par “Local contrast”
TP_LOCALLAB_WAVMASK_TOOLTIP;Autorise un travail fin sur les masques niveaux de contraste (structure)
TP_RETINEX_CURVEEDITOR_CD_TOOLTIP;Luminance en fonction de la luminance L=f(L)\nCorrige les données raw pour réduire halos et artéfacts.
@ -2628,7 +2628,7 @@ TP_RETINEX_EQUAL;Égaliseur
TP_RETINEX_FREEGAMMA;Gamma manuel
TP_RETINEX_GAIN;Gain
TP_RETINEX_GAINOFFS;Gain et Décalage (brillance)
TP_RETINEX_GAINTRANSMISSION;Gain sur Transmission
TP_RETINEX_GAINTRANSMISSION;Gain Transmission:
TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplifie ou réduit le canal transmission pour atteindre la luminance souhaitée.\nAbscisses: transmission ; min = 0, max = valeurs.\nOrdonnées: gain.
TP_RETINEX_TLABEL_TOOLTIP;Résultat du calcul de transmission.\nMin et Max sont utilisés par Variance.\nMoyen et Sigma.\nTm=Min TM=Niveau maximum de transmission.
TP_RETINEX_TRANF;Transmission
TP_RETINEX_TRANSMISSION;Modulation du canal 'transmission'
TP_RETINEX_TRANSMISSION;Modulation 'transmission'
TP_RETINEX_TRANSMISSION_TOOLTIP;Transmission en fonction de la transmission.\nAbscisses: transmission des valeurs négatives (min), moyennes, et positives (max).\nOrdonnées: amplification ou réduction.
TP_WAVELET_NPTYPE_TOOLTIP;Cet algorithme utilise la proximité d'un pixel et huit de ses voisins. Si moins de différence, les bords sont renforcés.
TP_WAVELET_OPACITY;Opacité Bleu-Jaune
TP_WAVELET_OPACITYW;Courbe de contraste d/v-h
TP_WAVELET_OPACITYWL;Contraste local final
TP_WAVELET_OPACITYWL;Contraste local
TP_WAVELET_OPACITYWL_TOOLTIP;Modifie le contraste local final à la fin du traitement par ondelettes.\n\nLe côté gauche représente les plus faibles contrastes locaaux, progressant jusqu'aux plus grands contrastes locaux vers la droite.
TP_LOCALLAB_BLENDMASKMASK_TOOLTIP;If this slider = 0 no action.\nAdd or subtract the mask from the original image
TP_LOCALLAB_BLENDMASK_TOOLTIP;If blend = 0 only shape detection is improved.\nIf blend > 0 the mask is added to the image. If blend < 0 the mask is subtracted from the image
TP_LOCALLAB_BLGUID;Guided Filter
@ -2510,12 +2510,12 @@ TP_LOCALLAB_BLINV;Inverse
TP_LOCALLAB_BLLC;Luminance & Chrominance
TP_LOCALLAB_BLLO;Luminance only
TP_LOCALLAB_BLMED;Median
TP_LOCALLAB_BLMETHOD_TOOLTIP;Normal - direct blur and noise with all settings.\nInverse blur and noise with all settings. Be careful some results may be curious
TP_LOCALLAB_BLMETHOD_TOOLTIP;Normal: direct blur and noise with all settings.\nInverse: blur and noise with all settings. Warning, some settings may give curious results.
TP_LOCALLAB_BLNOI_EXP;Blur & Noise
TP_LOCALLAB_BLNORM;Normal
TP_LOCALLAB_BLSYM;Symmetric
TP_LOCALLAB_BLUFR;Blur/Grain & Denoise
TP_LOCALLAB_BLUMETHOD_TOOLTIP;To blur the background and isolate the foreground:\n-blur the background by completely covering the image with an an RT-spot (high values for scope and transition and ‘Normal’ or ‘Inverse’ in checkbox).\n-Isolate the foreground by using one or more ‘Excluding’ RT-spot(s) and increase the scope.\n\nThis module (including the "median" and "Guided filter") can be used in addition to the main-menu noise reduction.
TP_LOCALLAB_BLUMETHOD_TOOLTIP;To blur the background and isolate the foreground:\n-blur the background by completely covering the image with an an RT-spot (high values for scope and transition and ‘Normal’ or ‘Inverse’ in checkbox).\n-Isolate the foreground by using one or more ‘Excluding’ RT-spot(s) and increase the scope.\n\nThis module (including the ‘median’ and ‘Guided filter’) can be used in addition to the main-menu noise reduction
TP_LOCALLAB_CBDLCLARI_TOOLTIP;Enhances local contrast of the midtones.
TP_LOCALLAB_CBDL_ADJ_TOOLTIP;Same as wavelets.\nThe first level (0) acts on 2x2 pixel details.\nThe last level (5) acts on 64x64 pixel details.
@ -2542,7 +2542,7 @@ TP_LOCALLAB_CBDL_THRES_TOOLTIP;Prevents the sharpening of noise
TP_LOCALLAB_CBDL_TOOLNAME;Contrast by Detail Levels
TP_LOCALLAB_CENTER_X;Center X
TP_LOCALLAB_CENTER_Y;Center Y
TP_LOCALLAB_CH;Curves CL - LC
TP_LOCALLAB_CH;CL - LC
TP_LOCALLAB_CHROMA;Chrominance
TP_LOCALLAB_CHROMABLU;Chroma levels
TP_LOCALLAB_CHROMABLU_TOOLTIP;Increases or reduces the effect depending on the luma settings.\nValues under 1 reduce the effect. Values greater than 1 increase the effect.
TP_LOCALLAB_CIECAMLOG_TOOLTIP;This module is based on the CIECAM color appearance model which was designed to better simulate how human vision perceives colors under different lighting conditions.\nThe first Ciecam process 'Scene conditions' is carried out by Log encoding, it also uses 'Absolute luminance' at the time of shooting.\nThe second Ciecam process 'Image adjustments' is simplified and uses only 3 variables (local contrast, contrast J, saturation s).\nThe third Ciecam process 'Viewing conditions' adapts the output to the intended viewing conditions (monitor, TV, projector, printer, etc.) so that the chromatic and contrast appearance is preserved across the display environment.
TP_LOCALLAB_CIRCRADIUS;Spot size
TP_LOCALLAB_CIRCRAD_TOOLTIP;Contains the references of the RT-spot, useful for shape detection (hue, luma, chroma, Sobel).\nLow values may be useful for treating foliage.\nHigh values may be useful for treating skin
TP_LOCALLAB_CIRCRAD_TOOLTIP;Contains the references of the RT-spot, useful for shape detection (hue, luma, chroma, Sobel).\nLow values may be useful for processing foliage.\nHigh values may be useful for processing skin.
TP_LOCALLAB_CLARISOFT_TOOLTIP;The "Soft radius" slider (guided filter algorithm) reduces halos and irregularities for both Clarity and Sharp Mask and for all pyramid wavelet processes. To deactivate, set slider to zero.
TP_LOCALLAB_CLARISOFT_TOOLTIP;The ‘Soft radius’ slider (guided filter algorithm) reduces halos and irregularities for both Clarity and Sharp Mask and for all pyramid wavelet processes. To deactivate, set slider to zero.
TP_LOCALLAB_CLARITYML;Clarity
TP_LOCALLAB_CLARI_TOOLTIP;Levels 0 to 4 (included): ‘Sharp mask’ is enabled\nLevels 5 and above: 'Clarity' is enabled.\nUseful if you use 'Wavelet level tone mapping'
TP_LOCALLAB_CLIPTM;Clip restored data (gain)
TP_LOCALLAB_COFR;Color & Light
TP_LOCALLAB_COLORDE;ΔE preview color - intensity
TP_LOCALLAB_COLORDEPREV_TOOLTIP;Preview ΔE button will only work if you have activated one (and only one) of the tools in "Add tool to current spot" menu.\nTo be able to preview ΔE with several tools enabled, use Mask and modifications - Preview ΔE.
TP_LOCALLAB_COLORDE_TOOLTIP;Show a blue color-preview for ΔE selection if negative and green if positive.\n\nMask and modifications (show modified areas without mask): show actual modifications if positive, show enhanced modifications (luminance only) with blue and yellow if negative.
TP_LOCALLAB_COLORDEPREV_TOOLTIP;Preview ΔE button will only work if you have activated one (and only one) of the tools in ‘Add tool to current spot’ menu.\nTo be able to preview ΔE with several tools enabled, use Mask and modifications - Preview ΔE.
TP_LOCALLAB_COLORDE_TOOLTIP;Show a blue color preview for ΔE selection if negative and green if positive.\n\nMask and modifications (show modified areas without mask): show actual modifications if positive, show enhanced modifications (luminance only) with blue and yellow if negative.
TP_LOCALLAB_COLORSCOPE;Scope (color tools)
TP_LOCALLAB_COLORSCOPE_TOOLTIP;Common Scope slider for Color and Light, Shadows/Highlights, Vibrance.\nOther tools have their own scope controls.
TP_LOCALLAB_COLOR_TOOLNAME;Color & Light
TP_LOCALLAB_COL_NAME;Name
TP_LOCALLAB_COL_VIS;Status
TP_LOCALLAB_COMPFRA;Directional contrast
TP_LOCALLAB_COMPFRAME_TOOLTIP;Allows special effects. You can reduce artifacts with 'Clarity & Sharp mask - Blend & Soften Images".\nUses a lot of resources
TP_LOCALLAB_COMPFRAME_TOOLTIP;Allows you to create special effects. You can reduce artifacts with 'Clarity and Sharp mask - Blend and Soften Images’.\nUses a lot of resources.
TP_LOCALLAB_COMPLEX_METHOD;Software Complexity
TP_LOCALLAB_COMPLEX_TOOLTIP; Allow user to select Local adjustments rubrics.
TP_LOCALLAB_COMPLEX_TOOLTIP; Allow user to select Local adjustments complexity.
TP_LOCALLAB_COMPREFRA;Wavelet level tone mapping
TP_LOCALLAB_COMPRESS_TOOLTIP;Use if necessary the module 'Clarity & Sharp mask and Blend & Soften Images' by adjusting 'Soft radius' to reduce artifacts.
TP_LOCALLAB_COMPRESS_TOOLTIP;If necessary, use the module 'Clarity and Sharp mask and Blend and Soften Images' by adjusting 'Soft radius' to reduce artifacts.
TP_LOCALLAB_CONTCOL;Contrast threshold
TP_LOCALLAB_CONTFRA;Contrast by level
TP_LOCALLAB_CONTL;Contrast (J)
TP_LOCALLAB_CONTRAST;Contrast
TP_LOCALLAB_CONTRASTCURVMASK1_TOOLTIP;Allows you to freely modify the contrast of the mask (gamma and slope), instead of using a continuous and progressive curve. However it can create artifacts that have to be dealt with using the “Smooth radius” or “Laplacian threshold sliders”.
TP_LOCALLAB_CONTRASTCURVMASK1_TOOLTIP;Allows you to freely modify the contrast of the mask (gamma and slope), instead of using a continuous and progressive curve. However it can create artifacts that have to be dealt with using the ‘Smooth radius’ or ‘Laplacian threshold sliders’.
TP_LOCALLAB_CONTRASTCURVMASK_TOOLTIP;Allows you to freely change the contrast of the mask.\n Has a similar function to the Gamma and Slope sliders.\n It allows you to target certain parts of the image (usually the lightest parts of the mask by using the curve to exclude the darker parts).May create artifacts.
TP_LOCALLAB_CONTRESID;Contrast
TP_LOCALLAB_CONTTHMASK_TOOLTIP;Allows you to determine which parts of the image will be impacted based on the texture.
TP_LOCALLAB_CURVEEDITORM_CC_TOOLTIP;If curves at the top, mask is completely black no transformation is made by the mask on the image.\nAs you go down the curve, the mask gradually more colorful and brilliant, the image is changing more and more.\n\nThe gray transition line which represents the references (chroma, luma, hue).\nYou can choose or not to position the top of the curves on this transition.
TP_LOCALLAB_CURVEEDITORM_CC_TOOLTIP;If the curves are at the top, the mask is completely black and no changes are made to the image.\nAs you lower the curve, the mask gradually becomes more colorful and bright, progressively changing the image.\n\nIt is recommended (but not mandatory) to position the top of the curves on the gray boundary line which represents the reference values of chroma, luma, hue for the RT-spot.
TP_LOCALLAB_CURVEEDITOR_CC_TOOLTIP;If curves are at the top, the mask is completely black and no changes are made to the image.\nAs you lower the curve, the mask gradually becomes more colorful and bright, progressively changing the image.\n\nIt is recommended (but not mandatory) to position the top of the curves on the gray boundary line which represents the reference values of chroma, luma, hue for the RT-spot.
TP_LOCALLAB_CURVEEDITOR_LL_TOOLTIP;To activate the curves, set the ‘Curve type’ combobox to ‘Normal’
TP_LOCALLAB_CURVEEDITOR_TONES_LABEL;Tone curve
@ -2620,16 +2620,16 @@ TP_LOCALLAB_DENOIEQUAL_TOOLTIP;Allows you to carry out more or less noise reduct
TP_LOCALLAB_DENOI1_EXP;Denoise based on luminance mask
TP_LOCALLAB_DENOI2_EXP;Recovery based on luminance mask
TP_LOCALLAB_DENOILUMDETAIL_TOOLTIP;Allows you to recover luminance detail by progressively applying a Fourier transform (DCT).
TP_LOCALLAB_DENOIQUA_TOOLTIP;Conservative mode preserves low frequency detail. Aggressive mode removes low frequency detail.\nConservative and Aggressive use wavelets and DCT, can be used in conjunction with "Non-local Means - Luminance".
TP_LOCALLAB_DENOIS;Ψ Denoise
TP_LOCALLAB_DENOIQUA_TOOLTIP;Conservative mode preserves low frequency detail. Aggressive mode removes low frequency detail.\nConservative and Aggressive modes use wavelets and DCT and can be used in conjunction with ‘Non-local Means – Luminance’.
TP_LOCALLAB_DENOIS;Denoise
TP_LOCALLAB_DENOITHR_TOOLTIP;Adjusts edge detection to help reduce noise in uniform, low-contrast areas.
TP_LOCALLAB_DENOI_EXP;Denoise
TP_LOCALLAB_DENOI_TOOLTIP;This module can be used for noise reduction either on its own (at the end of the processing pipeline) or in addition to the Noise Reduction module in the Detail tab (which works at the beginning of the pipeline).\n Scope allows you to differentiate the action based on color (deltaE).
TP_LOCALLAB_ENABLE_MASKAFT;Use all algorithms Exposure
TP_LOCALLAB_ENARETIMASKTMAP_TOOLTIP;If enabled Mask uses Restored Datas after Transmission Map instead of Original datas
TP_LOCALLAB_ENARETIMASKTMAP_TOOLTIP;If enabled the Mask uses Restored Data after Transmission Map instead of Original data.
TP_LOCALLAB_ENH;Enhanced
TP_LOCALLAB_ENHDEN;Enhanced + chroma denoise
TP_LOCALLAB_EPSBL;Detail
@ -2663,9 +2663,9 @@ TP_LOCALLAB_EXPCHROMA_TOOLTIP;Use in association with ‘Exposure compensation f
TP_LOCALLAB_EXPCOLOR_TOOLTIP;Adjust color, lightness, contrast and correct small defects such as red-eye, sensor dust etc.
TP_LOCALLAB_EXPCOMP;Exposure compensation ƒ
TP_LOCALLAB_EXPCOMPINV;Exposure compensation
TP_LOCALLAB_EXPCOMP_TOOLTIP;For portraits or images with a low color gradient. You can change "Shape detection" in "Settings":\n\nIncrease 'ΔE scope threshold'\nReduce 'ΔE decay'\nIncrease 'ab-L balance (ΔE)’
TP_LOCALLAB_EXPCOMP_TOOLTIP;For portraits or images with a low color gradient. You can change ‘Shape detection’ in "Settings":\n\nIncrease 'ΔE scope threshold'\nReduce 'ΔE decay'\nIncrease 'ab-L balance (ΔE)’
TP_LOCALLAB_EXPCONTRASTPYR_TOOLTIP;See the documentation for Wavelet Levels.\nThere are some differences in the Locallab version: more tools and more possibilities for working on individual detail levels.\ne.g. Wavelet-level tone mapping.
TP_LOCALLAB_EXPCONTRAST_TOOLTIP;Avoid spots that are too small ( < 32x32 pixels).\nUse low ‘Transition value’ and high ‘Transition decay’and ‘Scope’ to simulate small RT-spots and deal wth defects.\nUse 'Clarity & Sharp mask and Blend & Soften Images' if necessary by adjusting 'Soft radius' to reduce artifacts.
TP_LOCALLAB_EXPCONTRAST_TOOLTIP;Avoid spots that are too small ( < 32x32 pixels).\nUse low ‘Transition value’ and high ‘Transition decay’ and ‘Scope’ to simulate small RT-spots and deal with defects.\nUse 'Clarity and Sharp mask and Blend and Soften Images' if necessary by adjusting 'Soft radius' to reduce artifacts.
TP_LOCALLAB_EXPCURV;Curves
TP_LOCALLAB_EXPGRAD;Graduated Filter
TP_LOCALLAB_EXPGRADCOL_TOOLTIP;A graduated filter is available in Color and Light (luminance, chrominance & hue gradients, and "Merge file") Exposure (luminance grad.), Exposure Mask (luminance grad.), Shadows/Highlights (luminance grad.), Vibrance (luminance, chrominance & hue gradients), Local contrast & wavelet pyramid (local contrast grad.).\nFeather is located in Settings.
@ -2673,13 +2673,13 @@ TP_LOCALLAB_EXPLAPBAL_TOOLTIP;Changes the transformed/original image blend
TP_LOCALLAB_EXPLAPGAMM_TOOLTIP;Changes the behaviour for images with too much or too little contrast by adding a gamma curve before and after the Laplace transform
TP_LOCALLAB_EXPLAPLIN_TOOLTIP;Changes the behaviour for underexposed images by adding a linear component prior to applying the Laplace transform
TP_LOCALLAB_EXPLAP_TOOLTIP;Moving the slider to the right progressively reduces the contrast.
TP_LOCALLAB_EXPMERGEFILE_TOOLTIP;Allows you to use GIMP or Photoshop (c) layer blend modes i.e. Difference, Multiply, Soft Light, Overlay etc., with opacity control.\nOriginal Image : merge current RT-spot with Original.\nPrevious spot : merge current Rt-spot with previous - if there is only one spot previous = original.\nBackground : merge current RT-spot with a color and luminance background (fewer possibilties)
TP_LOCALLAB_EXPMERGEFILE_TOOLTIP;Allows you to use GIMP or Photoshop (c) layer blend modes i.e. Difference, Multiply, Soft Light, Overlay etc., with opacity control.\nOriginal Image : merge current RT-Spot with Original.\nPrevious spot : merge current Rt-Spot with previous - if there is only one spot, previous = original.\nBackground : merge current RT-Spot with a color and luminance background (fewer possibilties).
TP_LOCALLAB_EXPMETHOD_TOOLTIP;Standard : use an algorithm similar as main Exposure but in L*a*b* and taking account of deltaE.\n\nContrast attenuator : use another algorithm also with deltaE and with Poisson equation to solve Laplacian in Fourier space.\nContrast attenuator, Dynamic range compression and Standard can be combined.\nFFTW Fourier Transform is optimized in size to reduce processing time.\nReduce artifacts and noise.
TP_LOCALLAB_EXPNOISEMETHOD_TOOLTIP;Applies a median filter before the Laplace transform to prevent artifacts (noise).\nYou can also use the "Denoise" tool.
TP_LOCALLAB_EXPNOISEMETHOD_TOOLTIP;Applies a median filter before the Laplace transform to prevent artifacts (noise).\nYou can also use the ‘Denoise’ tool.
TP_LOCALLAB_EXPOSE;Dynamic Range & Exposure
TP_LOCALLAB_EXPOSURE_TOOLTIP;Modify exposure in L*a*b space using Laplacian PDE algorithms to take into account dE and minimize artifacts.
TP_LOCALLAB_EXPRETITOOLS;Advanced Retinex Tools
TP_LOCALLAB_EXPSHARP_TOOLTIP;RT-Spot minimum 39*39.\nUse low transition values and high ‘Transition decay’ and ‘Scope’ values to simulate smaller RT-spots.
TP_LOCALLAB_EXPSHARP_TOOLTIP;RT-Spot minimum 39*39.\nUse low transition values and high ‘Transition decay’ and ‘Scope’ values to simulate smaller RT-Spots.
TP_LOCALLAB_EXPTOOL;Exposure Tools
TP_LOCALLAB_EXPTRC;Tone Response Curve - TRC
TP_LOCALLAB_EXP_TOOLNAME;Dynamic Range & Exposure
@ -2693,19 +2693,19 @@ TP_LOCALLAB_FATLEVEL;Sigma
TP_LOCALLAB_FATRES;Amount Residual Image
TP_LOCALLAB_FATSHFRA;Dynamic Range Compression Mask ƒ
TP_LOCALLAB_FEATH_TOOLTIP;Gradient width as a percentage of the Spot diagonal\nUsed by all graduated filters in all tools.\nNo action if a graduated filter hasn’t been activated.
TP_LOCALLAB_FFTMASK_TOOLTIP;Use a Fourier transform for better quality (increased processing time and memory requirements)
TP_LOCALLAB_FFTW;ƒ - Use Fast Fourier Transform
TP_LOCALLAB_FFTW2;ƒ - Use Fast Fourier Transform (TIF, JPG,..)
TP_LOCALLAB_FFTWBLUR;ƒ - Always Use Fast Fourier Transform
TP_LOCALLAB_FULLIMAGE;Dark-Ev & white-Ev for the whole image
TP_LOCALLAB_FULLIMAGE;Black-Ev and White-Ev for whole image
TP_LOCALLAB_FULLIMAGELOG_TOOLTIP;Calculates the Ev levels for the whole image.
TP_LOCALLAB_GAM;Gamma
TP_LOCALLAB_GAMFRA;Tone response curve (TRC)
TP_LOCALLAB_GAMM;Gamma
TP_LOCALLAB_GAMMASKCOL;Gamma
TP_LOCALLAB_GAMMASK_TOOLTIP;Gamma and Slope allow a soft and artifact-free transformation of the mask by progressively modifying “L” to avoid any discontinuities.
TP_LOCALLAB_GAMMASK_TOOLTIP;Adjusting Gamma and Slope can provide a soft and artifact-free transformation of the mask by progressively modifying ‘L’ to avoid any discontinuities.
TP_LOCALLAB_GAMSH;Gamma
TP_LOCALLAB_GRADANG;Gradient angle
TP_LOCALLAB_GRADANG_TOOLTIP;Rotation angle in degrees : -180 0 +180
TP_LOCALLAB_GRIDFRAME_TOOLTIP;You can use this tool as a brush. Use small spot and adapt transition and transition decay\nOnly mode NORMAL and eventually Hue, Saturation, Color, Luminosity are concerned by Merge background (ΔE)
TP_LOCALLAB_GRIDFRAME_TOOLTIP;You can use this tool as a brush. Use a small spot and adapt the ‘Transition value’ and ‘Transition decay’\nOnly 'Normal' mode and possibly Hue, Saturation, Color, Luminosity are concerned by Merge background (ΔE)
TP_LOCALLAB_GRIDMETH_TOOLTIP;Color toning: the luminance is taken into account when varying chroma. Equivalent to H=f(H) if the "white dot" on the grid remains at zero and you only vary the "black dot". Equivalent to "Color toning" if you vary the 2 dots.\n\nDirect: acts directly on the chroma
TP_LOCALLAB_GRIDONE;Color Toning
TP_LOCALLAB_GRIDTWO;Direct
@ -2737,13 +2736,13 @@ TP_LOCALLAB_GUIDFILTER_TOOLTIP;Can reduce or increase artifacts.
TP_LOCALLAB_GUIDSTRBL_TOOLTIP;Intensity of the guided filter
TP_LOCALLAB_HHMASK_TOOLTIP;Fine hue adjustments for example for the skin.
TP_LOCALLAB_HIGHMASKCOL;Highlights
TP_LOCALLAB_HLH;Curves H
TP_LOCALLAB_HLH;H
TP_LOCALLAB_IND;Independent (mouse)
TP_LOCALLAB_INDSL;Independent (mouse + sliders)
TP_LOCALLAB_INVBL;Inverse
TP_LOCALLAB_INVBL_TOOLTIP;Alternative to ‘Inverse’ mode: use two spots\nFirst Spot:\n full image - delimiter outside preview\n RT-spot shape: rectangle. Transition 100\n\nSecond spot : Excluding spot
TP_LOCALLAB_INVBL_TOOLTIP;Alternative to ‘Inverse’ mode: use two spots\nFirst Spot:\n Full Image\n\nSecond spot : Excluding spot
TP_LOCALLAB_INVERS;Inverse
TP_LOCALLAB_INVERS_TOOLTIP;Fewer possibilities if selected (Inverse).\n\nAlternative: use two spots\nFirst Spot:\n full image - delimiter outside preview\n RT-spot shape: rectangle. Transition 100\n\nSecond spot: Excluding spot
TP_LOCALLAB_INVERS_TOOLTIP;Fewer possibilities if selected (Inverse).\n\nAlternative: use two spots\nFirst Spot:\n Full Image\n \nSecond spot: Excluding spot
TP_LOCALLAB_LAPRAD1_TOOLTIP;Increases the contrast of the mask by increasing the luminance values of the lighter areas. Can be used in conjunction with the L(L) and LC(H) curves.
TP_LOCALLAB_LAPRAD2_TOOLTIP;Smooth radius uses a guided filter to decrease artifacts and smooth out the transition
TP_LOCALLAB_LAPRAD_TOOLTIP;Smooth radius uses a guided filter to decrease artifacts and smooth out the transition
TP_LOCALLAB_LAP_MASK_TOOLTIP;Solve PDE for all Laplacian masks.\nIf enabled Laplacian threshold mask reduce artifacts and smooth result.\nIf disabled linear response.
TP_LOCALLAB_LAP_MASK_TOOLTIP;Solves PDEs for all Laplacian masks.\nIf enabled the Laplacian threshold mask reduces artifacts and smooths the result.\nIf disabled the response is linear.
TP_LOCALLAB_LC_FFTW_TOOLTIP;FFT improves quality and allows the use of large radii, but increases processing time (depends on the area to be processed). Preferable to use only for large radii. The size of the area can be reduced by a few pixels to optimize the FFTW. This can reduce the processing time by a factor of 1.5 to 10.
TP_LOCALLAB_LC_TOOLNAME;Local Contrast & Wavelets
TP_LOCALLAB_LEVELBLUR;Maximum blur levels
TP_LOCALLAB_LEVELWAV;Ψ Wavelet levels
TP_LOCALLAB_LEVELWAV;Wavelet levels
TP_LOCALLAB_LEVELWAV_TOOLTIP;The Level is automatically adapted to the size of the spot and the preview.\nFrom level 9 size max 512 to level 1 size max = 4
TP_LOCALLAB_LEVFRA;Levels
TP_LOCALLAB_LIGHTNESS;Lightness
@ -2776,20 +2775,20 @@ TP_LOCALLAB_LMASK_LEVEL_TOOLTIP;Allows you to decrease or increase the effect on
TP_LOCALLAB_LMASK_LL_TOOLTIP;Allows you to freely change the contrast of the mask.\n Has a similar function to the Gamma and Slope sliders.\n It allows you to target certain parts of the image (usually the lightest parts of the mask by using the curve to exclude the darker parts). May create artifacts.
TP_LOCALLAB_LOGAUTOGRAY_TOOLTIP;Automatically calculates the 'mean luminance' for the scene conditons when the ‘Automatic’ button in Relative Exposure Levels is pressed.
TP_LOCALLAB_LOGAUTO_TOOLTIP;Pressing this button will calculate the 'dynamic range' and 'mean luminance' for the scene conditions if the "Auto mean luminance (Yb%)” is checked).\nAlso calculates the absolute luminance at the time of shooting.\nPress the button again to adjust the automatically calculated values.
TP_LOCALLAB_LOGAUTOGRAY_TOOLTIP;Automatically calculates the 'Mean luminance' for the scene conditions when the ‘Automatic’ button in Relative Exposure Levels is pressed.
TP_LOCALLAB_LOGAUTO_TOOLTIP;Pressing this button will calculate the dynamic range and 'Mean luminance' for the scene conditions if the "Auto mean luminance (Yb%)” is checked).\nAlso calculates the absolute luminance at the time of shooting.\nPress the button again to adjust the automatically calculated values.
TP_LOCALLAB_LOGBASE_TOOLTIP;Default = 2.\nValues less than 2 reduce the action of the algorithm making the shadows darker and the highlights brighter.\nWith values greater than 2, the shadows are grayer and the highlights become more washed out.
TP_LOCALLAB_LOGBLACKWHEV_TOOLTIP;Estimated values of Dynamic Range i.e. Black Ev and White Ev
TP_LOCALLAB_LOGCATAD_TOOLTIP;The chromatic adaptation allows us to interpret a color according to its spatio-temporal environment.\nUseful when the white balance is far from reference D50.\nAdapts colors to the illuminant of the output device.
TP_LOCALLAB_LOGBLACKWHEV_TOOLTIP;Estimated values of dynamic range i.e. Black Ev and White Ev
TP_LOCALLAB_LOGCATAD_TOOLTIP;The chromatic adaptation allows us to interpret a color according to its spatio-temporal environment.\nUseful when the white balance deviates significantly from the D50 reference.\nAdapts colors to the illuminant of the output device.
TP_LOCALLAB_LOGCOLORFL;Colorfulness (M)
TP_LOCALLAB_LOGCOLORF_TOOLTIP;Perceived amount of hue in relation to gray.\nIndicator that a stimulus appears more or less colored.
TP_LOCALLAB_LOGCONQL;Contrast (Q)
@ -2803,7 +2802,7 @@ TP_LOCALLAB_LOGENCOD_TOOLTIP;Tone Mapping with Logarithmic encoding (ACES).\nUse
TP_LOCALLAB_LOGEXP;All tools
TP_LOCALLAB_LOGFRA;Scene Conditions
TP_LOCALLAB_LOGFRAME_TOOLTIP;Allows you to calculate and adjust the Ev levels and the 'Mean luminance Yb%' (source gray point) for the spot area. The resulting values will be used by all Lab operations and most RGB operations in the pipeline.\nTakes into account exposure compensation in the main-menu Exposure tab.\nAlso calculates the absolute luminance at the time of shooting.
TP_LOCALLAB_LOGIMAGE_TOOLTIP;Takes into account corresponding Ciecam variables (mainly Contrast 'J' and Saturation 's', and also 'advanced' Contrast 'Q' , Brightness 'Q', Lightness (J), Colorfulness (M)).
TP_LOCALLAB_LOGIMAGE_TOOLTIP;Takes into account corresponding Ciecam variables (mainly Contrast 'J' and Saturation 's', and also Contrast (Q) , Brightness (Q), Lightness (J), Colorfulness (M) in Advanced mode).
TP_LOCALLAB_LOGLIGHTL;Lightness (J)
TP_LOCALLAB_LOGLIGHTL_TOOLTIP;Close to lightness (L*a*b*), takes into account the increase in perceived coloration.
TP_LOCALLAB_LOGLIGHTQ;Brightness (Q)
@ -2815,22 +2814,22 @@ TP_LOCALLAB_LOGREPART_TOOLTIP;Allows you to adjust the relative strength of the
TP_LOCALLAB_LOGSATURL_TOOLTIP;Saturation (s) in CIECAM16 corresponds to the color of a stimulus in relation to its own brightness.\nActs mainly on medium and highlights tones
TP_LOCALLAB_LOGSCENE_TOOLTIP;Corresponds to the shooting conditions.
TP_LOCALLAB_LOGSRCGREY_TOOLTIP;Estimated gray point value of the image.
TP_LOCALLAB_LOGSURSOUR_TOOLTIP;Changes tones and colors to take into account the Scene conditions.\n\n<b>Average</b>: Average light environment (standard). The image will not change.\n\n<b>Dim</b>: Dim environment. The image will become slightly bright.
TP_LOCALLAB_LOGSURSOUR_TOOLTIP;Changes tones and colors to take into account the Scene conditions.\n\n<b>Average</b>: Average light environment (standard). The image will not change.\n\n<b>Dim</b>: Dim environment. The image will become slightly brighter.
TP_LOCALLAB_LOGTARGGREY_TOOLTIP;You can adjust this value to suit.
TP_LOCALLAB_LOGVIEWING_TOOLTIP;Corresponds to the medium on which the final image will be viewed (monitor, TV, projector, printer,..), as well as its environment.
TP_LOCALLAB_LOG_TOOLNAME;Log Encoding
TP_LOCALLAB_LUM;Curves LL - CC
TP_LOCALLAB_LUM;LL - CC
TP_LOCALLAB_LUMADARKEST;Darkest
TP_LOCALLAB_LUMASK;Background color for luminance mask
TP_LOCALLAB_LUMASK;Background color/luma mask
TP_LOCALLAB_LUMASK_TOOLTIP;Adjusts the shade of gray or color of the mask background in Show Mask (Mask and modifications)
TP_LOCALLAB_LUMAWHITESEST;Lightest
TP_LOCALLAB_LUMFRA;L*a*b* standard
TP_LOCALLAB_LUMONLY;Luminance only
TP_LOCALLAB_MASFRAME;Mask and Merge
TP_LOCALLAB_MASFRAME_TOOLTIP;For all masks.\nTakes into account the deltaE image to avoid modifying the selection area when the following Mask Tools are used: Gamma, Slope, Chroma, Contrast curve, Local contrast (by wavelet level), Blur Mask and Structure Mask (if enabled ).\nDisabled when Inverse mode is used
TP_LOCALLAB_MASK;Contrast
TP_LOCALLAB_MASFRAME_TOOLTIP;For all masks.\nTakes into account the deltaE image to avoid modifying the selection area when the following Mask Tools are used: Gamma, Slope, Chroma, Contrast curve, Local contrast (by wavelet level), Blur Mask and Structure Mask (if enabled ).\nDisabled when Inverse mode is used.
TP_LOCALLAB_MASK;Curves
TP_LOCALLAB_MASK2;Contrast curve
TP_LOCALLAB_MASKCOL;Mask Curves
TP_LOCALLAB_MASKCOL;
TP_LOCALLAB_MASKCOM;Common Color Mask
TP_LOCALLAB_MASKCOM_TOOLNAME;Common Color Mask
TP_LOCALLAB_MASKCOM_TOOLTIP;A tool in its own right.\nCan be used to adjust the image appearance (chrominance, luminance, contrast) and texture as a function of Scope.
@ -2838,7 +2837,7 @@ TP_LOCALLAB_MASKCURVE_TOOLTIP;The 3 curves are set to 1 (maximum) by default:\nC
TP_LOCALLAB_MASKDDECAY;Decay strength
TP_LOCALLAB_MASKDECAY_TOOLTIP;Manages the rate of decay for the gray levels in the mask.\n Decay = 1 linear, Decay > 1 sharper parabolic transitions, Decay < 1 more gradual transitions
TP_LOCALLAB_MASKH;Hue curve
TP_LOCALLAB_MASKLC_TOOLTIP;This allows you to target the denoise based on the image luminance information contained in the L(L) or LC(H) mask (Mask and Modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n 'Dark area luminance threshold'. If 'Reinforce denoise in dark and light areas' > 1 the denoise is progressively increased from 0% at the threshold settings to 100% at the maximum black value (determined by mask).\n 'Light area luminance threshold'.The denoise is progressively decreased from 100% at the threshold setting to 0% at the maximum white value (determined by mask).\n In the area between the two thresholds, the denoise settings are not affected by the mask.
TP_LOCALLAB_MASKLC_TOOLTIP;This allows you to target the denoise based on the image luminance information contained in the L(L) or LC(H) mask (Mask and Modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n 'Dark area luminance threshold'. If 'Reinforce denoise in dark and light areas' > 1 the denoise is progressively increased from 0% at the threshold setting to 100% at the maximum black value (determined by mask).\n 'Light area luminance threshold'.The denoise is progressively decreased from 100% at the threshold setting to 0% at the maximum white value (determined by mask).\n In the area between the two thresholds, the denoise settings are not affected by the mask.
TP_LOCALLAB_MASKDE_TOOLTIP;Used to target the denoise as a function of the image luminance information contained in the L(L) or LC(H) masks (Mask and modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n If the mask is below the ‘dark’ threshold, then the Denoise will be applied progressively.\n if the mask is above the ‘light’ threshold, then the Denoise will be applied progressively.\n Between the two, the image settings without the Denoise will be maintained, unless you adjust the sliders "Gray area luminance denoise" or "Gray area chrominance denoise".
TP_LOCALLAB_MASKGF_TOOLTIP;Used to target the Guided Filter as a function of the image luminance information contained in the L(L) or LC(H) masks (Mask and modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n If the mask is below the ‘dark’ threshold, then the GF will be applied progressively.\n if the mask is above the ‘light’ threshold, then the GF will be applied progressively.\n Between the two, the image settings without the GF will be maintained.
TP_LOCALLAB_MASKRECOL_TOOLTIP;Used to modulate the effect of the Color and Light settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The ‘dark’ and ‘light’ areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Color and Light settings \n In between these two areas, the full value of the Color and Light settings will be applied
@ -2851,33 +2850,35 @@ TP_LOCALLAB_MASKRESVIB_TOOLTIP;Used to modulate the effect of the Vibrance and W
TP_LOCALLAB_MASKRESWAV_TOOLTIP;Used to modulate the effect of the Local contrast and Wavelet settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The ‘dark’ and ‘light’ areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Local contrast and Wavelet settings \n In between these two areas, the full value of the Local contrast and Wavelet settings will be applied
TP_LOCALLAB_MASKRELOG_TOOLTIP;Used to modulate the effect of the Log encoding settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The ‘dark’ and ‘light’ areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Log encoding settings - can be used to restore highlights reconstructed by Color propagation \n In between these two areas, the full value of the Log encoding settings will be applied
TP_LOCALLAB_MASKDEINV_TOOLTIP;Reverses the way the algorithm interprets the mask.\nIf checked black and very light areas will be decreased.
TP_LOCALLAB_MASKHIGTHRESC_TOOLTIP;Light-tone limit above which Color and Light will be restored progressively to their original values prior to being modified by the Color and Light settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘structure mask’, 'Blur mask', ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’, ‘Local contrast wavelet’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKHIGTHRESS_TOOLTIP;Light-tone limit above which Shadows Highlights will be restored progressively to their original values prior to being modified by the Shadows Highlights settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKHIGTHRESCB_TOOLTIP;Light-tone limit above which CBDL (Luminance only) will be restored progressively to their original values prior to being modified by the CBDL settings .\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKHIGTHRESRETI_TOOLTIP;Light-tone limit above which Retinex (Luminance only) will be restored progressively to their original values prior to being modified by the Retinex settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKHIGTHRESTM_TOOLTIP;Light-tone limit above which Tone Mapping will be restored progressively to their original values prior to being modified by the Tone Mapping settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKHIGTHRESVIB_TOOLTIP;Light-tone limit above which Vibrance and Warm Cool will be restored progressively to their original values prior to being modified by the Vibrance and Warm Cool settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKHIGTHRESWAV_TOOLTIP;Light-tone limit above which Local contrast and Wavelet will be restored progressively to their original values prior to being modified by the Local contrast and Wavelet settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKHIGTHRESE_TOOLTIP;Light-tone limit above which 'Dynamic range and Exposure' will be restored progressively to their original values prior to being modified by the 'Dynamic range and Exposure' settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKHIGTHRESL_TOOLTIP;Light-tone limit above which Log encoding will be restored progressively to their original values prior to being modified by the Log encoding settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKHIGTHRESD_TOOLTIP; The denoise is progressively decreased from 100% at the threshold setting to 0% at the maximum white value (as determined by the mask).\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘structure mask’, ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’, ‘Local contrast wavelet’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKHIGTHRESC_TOOLTIP;Lighter-tone limit above which the parameters will be restored progressively to their original values prior to being modified by the Color and Light settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Structure mask’, 'Blur mask', ‘Smooth radius’, Gamma and Slope, ‘Contrast curve’, ‘Local contrast’ (wavelets).\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKHIGTHRESS_TOOLTIP;Lighter-tone limit above which the parameters will be restored progressively to their original values prior to being modified by the Shadows Highlights settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, Gamma and Slope, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKHIGTHRESCB_TOOLTIP;Lighter-tone limit above which CBDL (Luminance only) parameters will be restored progressively to their original values prior to being modified by the CBDL settings .\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, Gamma and Slope, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKHIGTHRESRETI_TOOLTIP;Lighter-tone limit above which Retinex (Luminance only) parameters will be restored progressively to their original values prior to being modified by the Retinex settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, Gamma and Slope, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKHIGTHRESTM_TOOLTIP;Lighter-tone limit above which the parameters will be restored progressively to their original values prior to being modified by the Tone Mapping settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, Gamma and Slope, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKHIGTHRESVIB_TOOLTIP;Lighter-tone limit above which the parameters will be restored progressively to their original values prior to being modified by the Vibrance and Warm Cool settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, Gamma and Slope, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKHIGTHRESWAV_TOOLTIP;Lighter-tone limit above which the parameters will be restored progressively to their original values prior to being modified by the Local contrast and Wavelet settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, Gamma and Slope, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKHIGTHRESE_TOOLTIP;Lighter-tone limit above which the parameters will be restored progressively to their original values prior to being modified by the 'Dynamic range and Exposure' settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, Gamma and Slope, ‘Contrast curve’.\n Use a ‘lockable colorpicker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKHIGTHRESL_TOOLTIP;Lighter-tone limit above which the parameters will be restored progressively to their original values prior to being modified by the Log encoding settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKHIGTHRESD_TOOLTIP; The denoise is progressively decreased from 100% at the threshold setting to 0% at the maximum white value (as determined by the mask).\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Structure mask’, ‘Smooth radius’, Gamma and Slope, ‘Contrast curve’, ‘Local contrast’ (wavelets).\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask'=0 in Settings.
TP_LOCALLAB_MASKHIGTHRES_TOOLTIP; The Guided Filter is progressively decreased from 100% at the threshold setting to 0% at the maximum white value (as determined by the mask).\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘structure mask’, ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’, ‘Local contrast wavelet’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKLCTHR;Light area luminance threshold
TP_LOCALLAB_MASKLCTHR2;Light area luma threshold
TP_LOCALLAB_MASKLCTHRLOW;Dark area luminance threshold
TP_LOCALLAB_MASKLNOISELOW;Reinforce denoise in dark and light areas
TP_LOCALLAB_MASKLOWTHRES_TOOLTIP;The Guided Filter is progressively increased from 0% at the threshold setting to 100% at the maximum black value (as determined by the mask).\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘structure mask’, ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’, ‘Local contrast wavelet’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKLOWTHRESD_TOOLTIP;The denoise is progressively increased from 0% at the threshold setting to 100% at the maximum black value (as determined by the mask).\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘structure mask’, ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’, ‘Local contrast wavelet’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKLOWTHRESC_TOOLTIP;Dark-tone limit below which Color and Light will be restored progressively to their original values prior to being modified by the Color and Light settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘structure mask’, 'blur mask', ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’, ‘Local contrast wavelet’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKLOWTHRESL_TOOLTIP;Dark-tone limit below which Log encoding will be restored progressively to their original values prior to being modified by the Log encoding settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKLOWTHRESE_TOOLTIP;Dark-tone limit below which 'Dynamic range and Exposure' will be restored progressively to their original values prior to being modified by the 'Dynamic range and Exposure' settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKLOWTHRESS_TOOLTIP;Dark-tone limit below which Shadows Highligts will be restored progressively to their original values prior to being modified by the Shadows Highlights settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKLOWTHRESCB_TOOLTIP;Dark-tone limit below which CBDL (Luminance only) will be restored progressively to their original values prior to being modified by the CBDL settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKLOWTHRESRETI_TOOLTIP;Dark-tone limit below which Retinex (Luminance only) will be restored progressively to their original values prior to being modified by the Retinex settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKLOWTHRESTM_TOOLTIP;Dark-tone limit below which Tone Mapping will be restored progressively to their original values prior to being modified by the Tone Mapping settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKLOWTHRESVIB_TOOLTIP;Dark-tone limit below which Vibrance and Warm Cool will be restored progressively to their original values prior to being modified by the Vibrance and Warm Cool settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKLOWTHRESWAV_TOOLTIP;Dark-tone limit below which Local contrast and Wavelet will be restored progressively to their original values prior to being modified by the Local contrast and Wavelet settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
TP_LOCALLAB_MASKLCTHRMID;Gray area luminance denoise
TP_LOCALLAB_MASKLCTHRMIDCH;Gray area chrominance denoise
TP_LOCALLAB_MASKLCTHRLOW2;Dark area luma threshold
TP_LOCALLAB_MASKLNOISELOW;Reinforce dark/light areas
TP_LOCALLAB_MASKLOWTHRES_TOOLTIP;The Guided Filter is progressively increased from 0% at the threshold setting to 100% at the maximum black value (as determined by the mask).\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Structure mask’, ‘Smooth radius’, Gamma and Slope, ‘Contrast curve’, ‘Local contrast’ (wavelets).\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKLOWTHRESD_TOOLTIP;The denoise is progressively increased from 0% at the threshold setting to 100% at the maximum black value (as determined by the mask).\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Structure mask’, ‘Smooth radius’, Gamma and Slope, ‘Contrast curve’, ‘Local contrast’ (wavelets).\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKLOWTHRESC_TOOLTIP;Dark-tone limit below which the parameters will be restored progressively to their original values prior to being modified by the Color and Light settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Structure mask’, 'blur mask', ‘Smooth radius’, Gamma and Slope, ‘Contrast curve’, ‘Local contrast’ (wavelets).\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKLOWTHRESL_TOOLTIP;Dark-tone limit below which the parameters will be restored progressively to their original values prior to being modified by the Log encoding settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKLOWTHRESE_TOOLTIP;Dark-tone limit below which the parameters will be restored progressively to their original values prior to being modified by the 'Dynamic range and Exposure' settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, Gamma and Slope, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKLOWTHRESS_TOOLTIP;Dark-tone limit below which the parameters will be restored progressively to their original values prior to being modified by the Shadows Highlights settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, Gamma and Slope, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKLOWTHRESCB_TOOLTIP;Dark-tone limit below which the CBDL parameters (Luminance only) will be restored progressively to their original values prior to being modified by the CBDL settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, Gamma and Slope, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKLOWTHRESRETI_TOOLTIP;Dark-tone limit below which the Retinex (Luminance only) parameters will be restored progressively to their original values prior to being modified by the Retinex settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, Gamma and Slope, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKLOWTHRESTM_TOOLTIP;Dark-tone limit below which the parameters will be restored progressively to their original values prior to being modified by the Tone Mapping settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, Gamma and Slope, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKLOWTHRESVIB_TOOLTIP;Dark-tone limit below which the parameters will be restored progressively to their original values prior to being modified by the Vibrance and Warm Cool settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, Gamma and Slope, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKLOWTHRESWAV_TOOLTIP;Dark-tone limit below which the parameters will be restored progressively to their original values prior to being modified by the Local contrast and Wavelet settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, Gamma and Slope, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Make sure you set ‘Background color mask’ = 0 in Settings.
TP_LOCALLAB_MASKLCTHRMID;Gray area luma denoise
TP_LOCALLAB_MASKLCTHRMIDCH;Gray area chroma denoise
TP_LOCALLAB_MERGEMER_TOOLTIP;Takes ΔE into account when merging files (equivalent of scope in this case)
TP_LOCALLAB_MERGENONE;None
TP_LOCALLAB_MERGEONE;Short Curves 'L' Mask
TP_LOCALLAB_MERGEOPA_TOOLTIP;Opacity = % of current spot to be merged with original or previous Spot.\nContrast threshold : adjusts result as a function of contrast in original image.
TP_LOCALLAB_MERGETHR;Original(Mask 7) + Mask LCH
TP_LOCALLAB_MERGETWO;Original(Mask 7)
TP_LOCALLAB_MERGETHR;Original + Mask LCh
TP_LOCALLAB_MERGETWO;Original
TP_LOCALLAB_MERGETYPE;Merge image and mask
TP_LOCALLAB_MERGETYPE_TOOLTIP;None, use all mask in LCH mode.\nShort curves 'L' mask, use a short circuit for mask 2, 3, 4, 6, 7.\nOriginal mask 8, blend current image with original
TP_LOCALLAB_MERGETYPE_TOOLTIP;None, use all mask in LCh mode.\nShort curves 'L' mask, use a short circuit for mask 2, 3, 4, 6, 7.\nOriginal mask 8, blend current image with original
TP_LOCALLAB_MLABEL;Restored data Min=%1 Max=%2 (Clip - Offset)
TP_LOCALLAB_MLABEL;Restored data Min=%1 Max=%2
TP_LOCALLAB_MLABEL_TOOLTIP;The values should be close to Min=0 Max=32768 (log mode) but other values are possible.You can adjust ‘Clip restored data (gain)’ and ‘Offset’ to normalize.\nRecovers image data without blending.
TP_LOCALLAB_SHADHIGH;Shadows/Highlights & Tone Equalizer
TP_LOCALLAB_SHADHMASK_TOOLTIP;Lowers the highlights of the mask in the same way as the shadows/highlights algorithm
TP_LOCALLAB_SHADMASK_TOOLTIP;Lifts the shadows of the mask in the same way as the shadows/highlights algorithm
TP_LOCALLAB_SHADOWHIGHLIGHT_TOOLTIP;Adjust shadows and highlights either with shadows & highlights sliders or with a tone equalizer.\nCan be used instead of, or in conjunction with the Exposure module.\nCan also be used as a graduated filter.
@ -3067,7 +3068,8 @@ TP_LOCALLAB_SHOWMASKSOFT_TOOLTIP;Allows you to visualize the different stages of
TP_LOCALLAB_SHOWMASKTYP1;Blur & Noise
TP_LOCALLAB_SHOWMASKTYP2;Denoise
TP_LOCALLAB_SHOWMASKTYP3;Blur & Noise + Denoise
TP_LOCALLAB_SHOWMASKTYP_TOOLTIP;Mask and modifications can be chosen.\nBlur and noise : in this case it is not used for 'denoise'.\nDenoise : in this case it is not used for 'blur and noise'.\n\nBlur and noise + denoise : mask is shared, be carefull to 'show modifications' and 'scope'
//TP_LOCALLAB_SHOWMASKTYP_TOOLTIP;Mask and modifications can be chosen.\nBlur and noise : in this case it is not used for 'denoise'.\nDenoise : in this case it is not used for 'blur and noise'.\n\nBlur and noise + denoise : mask is shared, be carefull to 'show modifications' and 'scope'
TP_LOCALLAB_SHOWMASKTYP_TOOLTIP;Can be used with ‘Mask and modifications’.\nIf ‘Blur and noise’ is selected, the mask cannot be used for Denoise.\nIf Denoise is selected, the mask cannot be used for ‘Blur and noise’.\nIf ‘Blur and noise + Denoise’ is selected, the mask is shared. Note that in this case, the Scope sliders for both ‘Blur and noise’ and Denoise will be active so it is advisable to use the option ‘Show modifications with mask’ when making any adjustments.
TP_LOCALLAB_SHOWMNONE;Show modified image
TP_LOCALLAB_SHOWMODIF;Show modified areas without mask
@ -3088,7 +3090,7 @@ TP_LOCALLAB_SH_TOOLNAME;Shadows/Highlights & Tone Equalizer
TP_LOCALLAB_SIGMAWAV;Attenuation response
TP_LOCALLAB_SIM;Simple
TP_LOCALLAB_SLOMASKCOL;Slope
TP_LOCALLAB_SLOMASK_TOOLTIP;Gamma and Slope allow a soft and artifact-free transformation of the mask by progressively modifying “L” to avoid any discontinuities.
TP_LOCALLAB_SLOMASK_TOOLTIP;Adjusting Gamma and Slope can provide a soft and artifact-free transformation of the mask by progressively modifying ‘L’ to avoid any discontinuities.
TP_LOCALLAB_SPECIAL_TOOLTIP;The checkbox allows you to remove all other actions i.e. “Scope”, masks, sliders etc., (except for transitions) and use just the effect of the RGB tone-curve.
TP_LOCALLAB_SPECIAL_TOOLTIP;The checkbox allows you to remove all other actions i.e. ‘Scope’, masks, sliders etc., (except for transitions) and use just the effect of the RGB tone-curve.
TP_LOCALLAB_SPOTNAME;New Spot
TP_LOCALLAB_STD;Standard
TP_LOCALLAB_STR;Strength
@ -3117,9 +3119,9 @@ TP_LOCALLAB_STRRETI_TOOLTIP;if Strength Retinex < 0.2 only Dehaze is enabled.\ni
TP_LOCALLAB_STRUC;Structure
TP_LOCALLAB_STRUCCOL;Spot structure
TP_LOCALLAB_STRUCCOL1;Spot structure
TP_LOCALLAB_STRUCT_TOOLTIP;Uses the Sobel algorithm to take into account structure for shape detection.\nActivate "Mask and modifications” > “Show spot structure" (advanced mode) to see a preview of the mask (without modifications).\n\nCan be used in conjunction with the Structure Mask, Blur Mask and “Local contrast (by wavelet level)” to improve edge detection.\n\nEffects of adjustments using Lightness, Contrast, Chrominance, Exposure or other non-mask-related tools visible using either ‘Show modified image” or “Show modified areas with mask ”.
TP_LOCALLAB_STRUCT_TOOLTIP;Uses the Sobel algorithm to take into account structure for shape detection.\nActivate ‘Mask and modifications’ > ‘Show spot structure’ (Advanced mode) to see a preview of the mask (without modifications).\n\nCan be used in conjunction with the Structure Mask, Blur Mask and ‘Local contrast’ (by wavelet level) to improve edge detection.\n\nEffects of adjustments using Lightness, Contrast, Chrominance, Exposure or other non-mask-related tools visible using either ‘Show modified image’ or ‘Show modified areas with mask’.
TP_LOCALLAB_STRUMASKCOL;Structure mask strength
TP_LOCALLAB_STRUMASK_TOOLTIP;Structure mask (slider) with the checkbox "Structure mask as tool" unchecked: In this case a mask showing the structure will be generated even if none of the 3 curves is activated. Structure masks are available for mask 1 (Blur and denoise") and mask 7 (Color & Light).
TP_LOCALLAB_STRUMASK_TOOLTIP;Structure mask (slider) with the checkbox 'Structure mask as tool' unchecked: In this case a mask showing the structure will be generated even if none of the 3 curves is activated. Structure masks are available for mask (Blur and denoise") and mask(Color & Light).
TP_LOCALLAB_STRUSTRMASK_TOOLTIP;Moderate use of this slider is recommended!
TP_LOCALLAB_STYPE;Shape method
TP_LOCALLAB_STYPE_TOOLTIP;You can choose between:\nSymmetrical - left handle linked to right, top handle linked to bottom.\nIndependent - all handles are independent.
TP_LOCALLAB_TLABEL_TOOLTIP;Transmission map result.\nMin and Max are used by Variance.\nTm=Min TM=Max of Transmission Map.\nYou can normalize the results with the threshold slider.
TP_LOCALLAB_TOOLCOLFRMASK_TOOLTIP;Allows you to modify the mask, if one exists
TP_LOCALLAB_TOOLMASK;Mask Tools
TP_LOCALLAB_TOOLMASK_TOOLTIP;Structure mask (slider) with the checkbox "Structure mask as tool" checked: in this case a mask showing the structure will be generated after one or more of the 2 curves L(L) or LC(H) has been modified.\n Here, the "Structure mask" behaves like the other Mask tools : Gamma, Slope, etc.\n It allows you to vary the action on the mask according to the structure of the image.
TP_LOCALLAB_TOOLMASK_2;Wavelets
TP_LOCALLAB_TOOLMASK_TOOLTIP;Structure mask (slider) with the checkbox ‘Structure mask as tool’ checked: in this case a mask showing the structure will be generated after one or more of the 2 curves L(L) or LC(H) has been modified.\n Here, the ‘Structure mask’ behaves like the other Mask tools : Gamma, Slope, etc.\n It allows you to vary the action on the mask according to the structure of the image.
TP_LOCALLAB_VIBRA_TOOLTIP;Adjusts vibrance (essentially the same as the global adjustment).\nCarries out the equivalent of a white-balance adjustment using a CIECAM algorithm.
TP_LOCALLAB_VIB_TOOLNAME;Vibrance & Warm/Cool
TP_LOCALLAB_VIS_TOOLTIP;<b>Click</b> to show/hide selected Control Spot.\n<b>Ctrl</b>+<b>click</b> to show/hide all Control Spot.
TP_LOCALLAB_WAMASKCOL;Ψ Mask Wavelet level
TP_LOCALLAB_WAMASKCOL;Mask Wavelet level
TP_LOCALLAB_WARM;Warm/Cool & Color artifacts
TP_LOCALLAB_WARM_TOOLTIP;This slider uses the CIECAM algorithm and acts as a White Balance control to make the color temperature of the selected area warmer or cooler.\nIt can also reduce color artifacts in some cases.
TP_LOCALLAB_WASDEN_TOOLTIP;Luminance noise reduction: the left-hand side of the curve including the dark-gray/light-gray boundary corresponds to the first 3 levels 0, 1, 2 (fine detail). The right hand side of the curve corresponds to the coarser details (level 3, 4, 5, 6).
@ -3169,24 +3172,24 @@ TP_LOCALLAB_WAT_BALTHRES_TOOLTIP;Balances the action within each level.
TP_LOCALLAB_WAT_BLURLC_TOOLTIP;The default blur setting affects all 3 L*a* b* components (luminance and colour).\nWhen checked, only luminance is blurred.
TP_LOCALLAB_WAT_CLARIC_TOOLTIP;“Merge chroma” is used to select the intensity of the desired effect on chrominance.
TP_LOCALLAB_WAT_CLARIL_TOOLTIP;“Merge luma” is used to select the intensity of the desired effect on luminance.
TP_LOCALLAB_WAT_CONTCHROMALEV_TOOLTIP;“Chroma levels”: adjusts the “a” and “b” components of Lab* as a proportion of the luminance value.
TP_LOCALLAB_WAT_CONTOFFSET_TOOLTIP;Offset modifies the balance between low-contrast and high-contrast details.\nHigh values will amplify contrast changes to the higher-contrast details, whereas low values will amplify contrast changes to low-contrast details.\nBy using a low “Attenuation response” value you can select which contrast values will be enhanced.
TP_LOCALLAB_WAT_CONTCHROMALEV_TOOLTIP;‘Chroma levels’: adjusts the “a” and “b” components of Lab* as a proportion of the luminance value.
TP_LOCALLAB_WAT_CONTOFFSET_TOOLTIP;Offset modifies the balance between low-contrast and high-contrast details.\nHigh values will amplify contrast changes to the higher-contrast details, whereas low values will amplify contrast changes to low-contrast details.\nBy using a low ‘Attenuation response’ value you can select which contrast values will be enhanced.
TP_LOCALLAB_WAT_DELTABAL_TOOLTIP;By moving the slider to the left, the lower levels are accentuated. To the right, the lower levels are reduced and the higher levels accentuated.
TP_LOCALLAB_WAT_EXPRESID_TOOLTIP;The residual image behaves in the same way as the main image when making adjustments to contrast, chroma etc.
TP_LOCALLAB_WAT_GRADW_TOOLTIP;The more you move the slider to the right, the more effective the detection algorithm will be and the less noticeable the effects of local contrast.
TP_LOCALLAB_WAT_LEVELLOCCONTRAST_TOOLTIP;Low to high local contrast from left to right on the x-axis.\nIncrease or decrease local contrast on the y-axis.
TP_LOCALLAB_WAT_LOCCONTRASTEDG_TOOLTIP;You can adjust the distribution of local contrast by wavelet level based on the initial intensity of the contrast. This will modify the effects of perspective and relief in the image, and/or reduce the contrast values for very low initial contrast levels.
TP_LOCALLAB_WAT_ORIGLC_TOOLTIP;“Merge only with original image”, prevents the “Wavelet Pyramid” settings from interfering with “Clarity” and “Sharp mask”.
TP_LOCALLAB_WAT_ORIGLC_TOOLTIP;‘Merge only with original image’, prevents the ‘Wavelet Pyramid’ settings from interfering with ‘Clarity’ and ‘Sharp mask’.
TP_LOCALLAB_WAT_RESIDBLUR_TOOLTIP;Blurs the residual image, independent of the levels.
TP_LOCALLAB_WAT_RESIDCOMP_TOOLTIP;Compresses the residual image to increase or reduce contrast.
TP_LOCALLAB_WAT_SIGMALC_TOOLTIP;The effect of the local contrast adjustment is stronger for medium-contrast details, and weaker for high and low-contrast details.\n This slider controls how quickly the effect dampens towards the extreme contrasts.\nThe higher the value of the slider, the wider the range of contrasts that will receive the full effect of the local contrast adjustment, and the higher the risk of generating artifacts.\nThe lower the value, the more the effect will be pinpointed towards a narrow range of contrast values.
TP_LOCALLAB_WAT_STRENGTHW_TOOLTIP;Intensity of edge-effect detection.
TP_LOCALLAB_WAT_STRWAV_TOOLTIP;Allows the local contrast to be varied according to a chosen gradient and angle. The variation of the luminance signal is taken into account and not the luminance.
TP_LOCALLAB_WAT_THRESHOLDWAV_TOOLTIP;Range of wavelet levels used throughout the "Wavelets" module.
TP_LOCALLAB_WAT_THRESHOLDWAV_TOOLTIP;Range of wavelet levels used throughout the ‘Wavelets’ module.
TP_LOCALLAB_WAT_WAVBLURCURV_TOOLTIP;Allows you to blur each level of decomposition.\nThe finest to coarsest levels of decomposition are from left to right.
TP_LOCALLAB_WAT_WAVCBDL_TOOLTIP;Similar to Contrast By Detail Levels. Fine to coarse detail levels from left to right on the x-axis.
TP_LOCALLAB_WAT_WAVDELTABAL_TOOLTIP;Acts on the balance of the three directions (horizontal, vertical and diagonal) based on the luminance of the image.\nBy default the shadows or highlights are reduced to avoid artifacts.
TP_LOCALLAB_WAT_WAVESHOW_TOOLTIP;Shows all of the "Edge sharpness" tools. It is advisable to read the Wavelet Levels documentation.
TP_LOCALLAB_WAT_WAVESHOW_TOOLTIP;Shows all of the ‘Edge sharpness’ tools. It is advisable to read the Wavelet Levels documentation.
TP_LOCALLAB_WAT_WAVLEVELBLUR_TOOLTIP;Allows you to adjust the maximum effect of blurring on the levels.
TP_LOCALLAB_WAT_WAVSHAPE_TOOLTIP;Low to high local contrast from left to right on the x-axis\nIncrease or decrease local contrast on the y-axis.
TP_LOCALLAB_WAT_WAVTM_TOOLTIP;The lower (negative) part compresses each level of decomposition creating a tone mapping effect.\nThe upper (positive) part attenuates the contrast by level.\nThe finest to coarsest levels of decomposition are from left to right on the x-axis.
@ -3198,19 +3201,20 @@ TP_LOCALLAB_WAVCOMPRE_TOOLTIP;Allows you to apply tone mapping or reduce local c
TP_LOCALLAB_WAVCOMP_TOOLTIP;Allows you to apply local contrast based on the direction of the wavelet decomposition : horizontal, vertical, diagonal
TP_LOCALLAB_WAVCON;Contrast by level
TP_LOCALLAB_WAVCONTF_TOOLTIP;Similar to Contrast By Detail Levels. Fine to coarse detail levels from left to right on the x-axis.
TP_LOCALLAB_WAVDEN;Luminance denoise by level
TP_LOCALLAB_WAVE;Ψ Wavelets
TP_LOCALLAB_WAVDEN;Luminance denoise
TP_LOCALLAB_WAVE;Wavelets
TP_LOCALLAB_WAVEDG;Local contrast
TP_LOCALLAB_WAVEEDG_TOOLTIP;Improves sharpness by targeting the action of local contrast on the edges. It has the same functions as the corresponding module in Wavelet Levels and uses the same settings.
TP_LOCALLAB_WAVEMASK_LEVEL_TOOLTIP;Range of wavelet levels used in “Local contrast (by wavelet level)”
TP_LOCALLAB_WAVEMASK_LEVEL_TOOLTIP;Range of wavelet levels used in ‘Local contrast’ (by wavelet level).
TP_LOCALLAB_WAVGRAD_TOOLTIP;Allows the local contrast to be varied according to a chosen gradient and angle. The variation of the luminance signal is taken into account and not the luminance.
TP_LOCALLAB_WAVHIGH;Ψ Wavelet high
TP_LOCALLAB_WAVHIGH;Wavelet high
TP_LOCALLAB_WAVHUE_TOOLTIP;Allows you to reduce or increase the denoise based on hue.
TP_LOCALLAB_WAVLEV;Blur by level
TP_LOCALLAB_WAVLOW;Ψ Wavelet low
TP_LOCALLAB_WAVMASK;Ψ Local contrast (by wavelet level)
TP_LOCALLAB_WAVLOW;Wavelet low
TP_LOCALLAB_WAVMASK;Local contrast
TP_LOCALLAB_WAVMASK_TOOLTIP;Uses wavelets to modify the local contrast of the mask and reinforce or reduce the structure (skin, buildings...)
TP_LOCALLAB_WAVMED;Ψ Wavelet normal
//TP_LOCALLAB_WAVMED;Ψ Wavelet normal
TP_LOCALLAB_WAVMED;Wavelet normal
TP_LOCALLAB_WEDIANHI;Median Hi
TP_LOCALLAB_WHITE_EV;White Ev
TP_LOCAL_HEIGHT;Bottom
@ -3555,7 +3559,7 @@ TP_WAVELET_BACUR;Curve
TP_WAVELET_BALANCE;Contrast balance d/v-h
TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified.
TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance.
TP_WAVELET_BALLUM;Denoise equalizer White-Black
TP_WAVELET_BANONE;None
@ -3630,9 +3634,9 @@ TP_WAVELET_DENCURV;Curve
TP_WAVELET_DENEQUAL;1 2 3 4 Equal
TP_WAVELET_DENH;Threshold
TP_WAVELET_DENL;Correction structure
TP_WAVELET_DENLH;Guided threshold by detail levels 1-4
TP_WAVELET_DENLH;Guided threshold levels 1-4
TP_WAVELET_DENLOCAL_TOOLTIP;Use a curve in order to guide the denoising according to the local contrast.\nThe areas are denoised, the structures are maintained
TP_WAVELET_DENMIX_TOOLTIP;Balances the action of the guide taking into account the original image and the denoised image
TP_WAVELET_DENMIX_TOOLTIP;The local-contrast reference value used by the guided filter.\nDepending on the image, results can vary depending on whether the noise is measured before or after the noise reduction. These four choices allow you to take into account various combinations of the original and modified (denoised) images to find the best compromise.
TP_WAVELET_DENOISE;Guide curve based on Local contrast
TP_WAVELET_DENOISEGUID;Guided threshold based on hue
TP_WAVELET_DENOISEH;High levels Curve Local contrast
TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine.
TP_WAVELET_MERGEC;Merge chroma
TP_WAVELET_MERGEL;Merge luma
TP_WAVELET_MIXCONTRAST;Reference local contrast
TP_WAVELET_MIXCONTRAST;Reference
TP_WAVELET_MIXDENOISE;Denoise
TP_WAVELET_MIXMIX;Mixed 50% noise - 50% denoise
TP_WAVELET_MIXMIX70;Mixed 30% noise - 70% denoise
@ -3772,7 +3776,7 @@ TP_WAVELET_STREND;Strength
TP_WAVELET_STRENGTH;Strength
TP_WAVELET_SUPE;Extra
TP_WAVELET_THR;Shadows threshold
TP_WAVELET_THRDEN_TOOLTIP;Generates a stepped curve in order to guide the denoising according to the local contrast.\nThe areas are denoised, the structures are maintained
TP_WAVELET_THRDEN_TOOLTIP;Generates a stepped curve used to guide the noise reduction as a function of local contrast. The denoise will be applied to uniform low local-contrast areas. Areas with detail (higher local contrast) will be preserved.
//TP_LOCALLAB_CIECAMLOG_TOOLTIP;This module is based on the CIECAM color appearance model which was designed to better simulate how human vision perceives colors under different lighting conditions.\nOnly the third Ciecam process (Viewing conditions - Target) is taken into account, as well as part of the second (contrast J, saturation s) , as well as some data from the first process (Scene conditions - Source) which is used for the Log encoding.\nIt also adapts the output to the intended viewing conditions (monitor, TV, projector, printer, etc.) so that the chromatic and contrast appearance is preserved across the display environment.
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Desmis
GitHub