generateTranslationDiffs

rtdata/languages/Catala

@@ -1424,7 +1424,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !IPTCPANEL_TITLEHINT;Enter a short verbal and human readable name for the image, this may be the file name.
 !IPTCPANEL_TRANSREFERENCE;Job ID
 !IPTCPANEL_TRANSREFERENCEHINT;Enter a number or identifier needed for workflow control or tracking.
-!LENSPROFILE_LENS_WARNING;Warning: the crop factor used for lens profiling is larger than the crop factor of the camera, the results might be wrong.
 !MAIN_BUTTON_ICCPROFCREATOR;ICC Profile Creator
 !MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: <b>Shift-F4</b>\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: <b>F4</b>
 !MAIN_BUTTON_NAVPREV_TOOLTIP;Navigate to the previous image relative to image opened in the Editor.\nShortcut: <b>Shift-F3</b>\n\nTo navigate to the previous image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: <b>F3</b>
@@ -1438,8 +1437,8 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !MAIN_TAB_ADVANCED;Advanced
 !MAIN_TAB_ADVANCED_TOOLTIP;Shortcut: <b>Alt-w</b>
 !MAIN_TAB_INSPECT; Inspect
-!MAIN_TOOLTIP_BACKCOLOR3;Background color of the preview: <b>Middle grey</b>\nShortcut: <b>9</b>
-!MAIN_TOOLTIP_PREVIEWSHARPMASK;Preview the <b>Sharpening Contrast Mask</b>.\nShortcut: <b>None</b>\n\nOnly works when sharpening is enabled and zoom >= 100%.
+!MAIN_TOOLTIP_BACKCOLOR3;Background color of the preview: <b>middle grey</b>\nShortcut: <b>9</b>
+!MAIN_TOOLTIP_PREVIEWSHARPMASK;Preview the <b>sharpening contrast mask</b>.\nShortcut: <b>None</b>\n\nOnly works when sharpening is enabled and zoom >= 100%.
 !MONITOR_PROFILE_SYSTEM;System default
 !NAVIGATOR_B;B:
 !NAVIGATOR_G;G:
@@ -1479,6 +1478,13 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !PARTIALPASTE_RETINEX;Retinex
 !PARTIALPASTE_SOFTLIGHT;Soft light
 !PARTIALPASTE_TM_FATTAL;Dynamic range compression
+!PREFERENCES_APPEARANCE;Appearance
+!PREFERENCES_APPEARANCE_COLORPICKERFONT;Color picker font
+!PREFERENCES_APPEARANCE_CROPMASKCOLOR;Crop mask color
+!PREFERENCES_APPEARANCE_MAINFONT;Main font
+!PREFERENCES_APPEARANCE_NAVGUIDECOLOR;Navigator guide color
+!PREFERENCES_APPEARANCE_THEME;Theme
+!PREFERENCES_AUTOSAVE_TP_OPEN;Save tool collapsed/expanded state on exit
 !PREFERENCES_BEHADDALL;All to 'Add'
 !PREFERENCES_BEHADDALLHINT;Set all parameters to the <b>Add</b> mode.\nAdjustments of parameters in the batch tool panel will be <b>deltas</b> to the stored values.
 !PREFERENCES_BEHSETALL;All to 'Set'
@@ -1514,6 +1520,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !PREFERENCES_D65;6500K
 !PREFERENCES_DIRECTORIES;Directories
 !PREFERENCES_EDITORCMDLINE;Custom command line
+!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
 !PREFERENCES_FLUOF2;Fluorescent F2
 !PREFERENCES_FLUOF7;Fluorescent F7
 !PREFERENCES_FLUOF11;Fluorescent F11
@@ -1543,7 +1550,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !PREFERENCES_MONITOR;Monitor
 !PREFERENCES_MONPROFILE;Default color profile
 !PREFERENCES_MONPROFILE_WARNOSX;Due to MacOS limitations, only sRGB is supported.
-!PREFERENCES_APPEARANCE_NAVGUIDECOLOR;Navigator guide color
 !PREFERENCES_NAVIGATIONFRAME;Navigation
 !PREFERENCES_OVERLAY_FILENAMES_FILMSTRIP;Overlay filenames on thumbnails in the editor pannel
 !PREFERENCES_PARSEDEXTDOWNHINT;Move selected extension down in the list.
@@ -1565,6 +1571,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !PREFERENCES_SAVE_TP_OPEN_NOW;Save tool collapsed/expanded state now
 !PREFERENCES_SERIALIZE_TIFF_READ;TIFF Read Settings
 !PREFERENCES_SERIALIZE_TIFF_READ_LABEL;Serialize reading of TIFF files
+!PREFERENCES_SERIALIZE_TIFF_READ_TOOLTIP;Enabling this option when working with folders containing uncompressed TIFF files can increase performance of thumbnail generation.
 !PREFERENCES_SHOWFILMSTRIPTOOLBAR;Show filmstrip toolbar
 !PREFERENCES_TAB_DYNAMICPROFILE;Dynamic Profile Rules
 !PREFERENCES_TAB_PERFORMANCE;Performance
@@ -1598,7 +1605,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !SAVEDLG_SUBSAMP_TOOLTIP;Best compression:\nJ:a:b 4:2:0\nh/v 2/2\nChroma halved horizontally and vertically.\n\nBalanced:\nJ:a:b 4:2:2\nh/v 2/1\nChroma halved horizontally.\n\nBest quality:\nJ:a:b 4:4:4\nh/v 1/1\nNo chroma subsampling.
 !SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
 !SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen enabled:\nClick in the preview with left mouse button to add a color picker\nDrag it around while pressing the left mouse button\nDelete the color picker with a right mouse button click\nDelete all color pickers with Shift + Right mouse button click\nRight click away from any color picker to go back to the Hand tool
+!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: <b>left-click</b>.\n- Drag a picker: <b>left-click and drag</b>.\n- Delete a picker: <b>right-click</b>.\n- Delete all pickers: <b>shift</b>+<b>right-click</b>.\n- Revert to hand tool: <b>right-click</b>.
 !TP_BWMIX_ALGO;Algorithm OYCPM
 !TP_BWMIX_ALGO_LI;Linear
 !TP_BWMIX_ALGO_SP;Special effects
@@ -1661,7 +1668,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !TP_CBDL_BEF;Before Black-and-White
 !TP_CBDL_METHOD;Process located
 !TP_CBDL_METHOD_TOOLTIP;Choose whether the Contrast by Detail Levels tool is to be positioned after the Black-and-White tool, which makes it work in L*a*b* space, or before it, which makes it work in RGB space.
-!TP_COLORAPP_VIEWING_ABSOLUTELUMINANCE_TOOLTIP;Absolute luminance of the viewing environment\n(usually 16cd/m²).
+!TP_COLORAPP_ABSOLUTELUMINANCE;Absolute luminance
 !TP_COLORAPP_ALGO;Algorithm
 !TP_COLORAPP_ALGO_ALL;All
 !TP_COLORAPP_ALGO_JC;Lightness + Chroma (JC)
@@ -1672,6 +1679,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !TP_COLORAPP_BADPIXSL_TOOLTIP;Suppression of hot/bad (brightly colored) pixels.\n0 = No effect\n1 = Median\n2 = Gaussian.\nAlternatively, adjust the image to avoid very dark shadows.\n\nThese artifacts are due to limitations of CIECAM02.
 !TP_COLORAPP_BRIGHT;Brightness (Q)
 !TP_COLORAPP_BRIGHT_TOOLTIP;Brightness in CIECAM02 takes into account the white's luminosity and differs from L*a*b* and RGB brightness.
+!TP_COLORAPP_CAT02ADAPTATION_TOOLTIP;When setting manually, values above 65 are recommended.
 !TP_COLORAPP_CHROMA;Chroma (C)
 !TP_COLORAPP_CHROMA_M;Colorfulness (M)
 !TP_COLORAPP_CHROMA_M_TOOLTIP;Colorfulness in CIECAM02 differs from L*a*b* and RGB colorfulness.
@@ -1702,6 +1710,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !TP_COLORAPP_LABEL_VIEWING;Viewing Conditions
 !TP_COLORAPP_LIGHT;Lightness (J)
 !TP_COLORAPP_LIGHT_TOOLTIP;Lightness in CIECAM02 differs from L*a*b* and RGB lightness.
+!TP_COLORAPP_MEANLUMINANCE;Mean luminance (Yb%)
 !TP_COLORAPP_MODEL;WP Model
 !TP_COLORAPP_MODEL_TOOLTIP;White-Point Model.\n\n<b>WB [RT] + [output]</b>: RT's white balance is used for the scene, CIECAM02 is set to D50, and the output device's white balance is set in Viewing Conditions.\n\n<b>WB [RT+CAT02] + [output]</b>: RT's white balance settings are used by CAT02 and the output device's white balance is set in Viewing Conditions.\n\n<b>Free temp+green + CAT02 + [output]:</b> temp and green are selected by the user, the output device's white balance is set in Viewing Conditions.
 !TP_COLORAPP_NEUTRAL;Reset
@@ -1727,6 +1736,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD50 temp=5003\nD55 temp=5503\nD65 temp=6504\nD75 temp=7504
 !TP_COLORAPP_TONECIE;Tone mapping using CIECAM02
 !TP_COLORAPP_TONECIE_TOOLTIP;If this option is disabled, tone mapping is done in L*a*b* space.\nIf this option is enabled, tone mapping is done using CIECAM02.\nThe Tone Mapping tool must be enabled for this setting to take effect.
+!TP_COLORAPP_VIEWING_ABSOLUTELUMINANCE_TOOLTIP;Absolute luminance of the viewing environment\n(usually 16 cd/m²).
 !TP_COLORAPP_WBCAM;WB [RT+CAT02] + [output]
 !TP_COLORAPP_WBRT;WB [RT] + [output]
 !TP_COLORTONING_AB;o C/L
@@ -1904,6 +1914,15 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !TP_LABCURVE_CURVEEDITOR_LH;LH
 !TP_LABCURVE_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H)
 !TP_LABCURVE_CURVEEDITOR_LL_TOOLTIP;Luminance according to luminance L=f(L)
+!TP_LENSPROFILE_CORRECTION_AUTOMATCH;Automatically
+!TP_LENSPROFILE_CORRECTION_LCPFILE;LCP file
+!TP_LENSPROFILE_CORRECTION_MANUAL;Manually
+!TP_LENSPROFILE_LENS_WARNING;Warning: the crop factor used for lens profiling is larger than the crop factor of the camera, the results might be wrong.
+!TP_LENSPROFILE_MODE_HEADER;Select the lens profile:
+!TP_LENSPROFILE_USE_CA;Chromatic aberration
+!TP_LENSPROFILE_USE_GEOMETRIC;Geometric
+!TP_LENSPROFILE_USE_HEADER;Select distortions to correct:
+!TP_LENSPROFILE_USE_VIGNETTING;Vignetting
 !TP_LOCALCONTRAST_AMOUNT;Amount
 !TP_LOCALCONTRAST_DARKNESS;Darkness level
 !TP_LOCALCONTRAST_LABEL;Local Contrast
@@ -1937,6 +1956,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !TP_PRSHARPENING_LABEL;Post-Resize Sharpening
 !TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions.
 !TP_RAWCACORR_AUTOIT;Iterations
+!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
 !TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
 !TP_RAWCACORR_CASTR;Strength
 !TP_RAWEXPOS_BLACK_0;Green 1 (lead)
@@ -2013,7 +2033,10 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !TP_RAW_SENSOR_XTRANS_LABEL;Sensor with X-Trans Matrix
 !TP_RAW_VNG4;VNG4
 !TP_RESIZE_ALLOW_UPSCALING;Allow Upscaling
-!TP_RETINEX_CONTEDIT_LH;Hue equalizer
+!TP_RETINEX_CONTEDIT_HSL;HSL histogram
+!TP_RETINEX_CONTEDIT_LAB;L*a*b* histogram
+!TP_RETINEX_CONTEDIT_LH;Hue
+!TP_RETINEX_CONTEDIT_MAP;Equalizer
 !TP_RETINEX_CURVEEDITOR_CD;L=f(L)
 !TP_RETINEX_CURVEEDITOR_CD_TOOLTIP;Luminance according to luminance L=f(L)\nCorrect raw data to reduce halos and artifacts.
 !TP_RETINEX_CURVEEDITOR_LH;Strength=f(H)
@@ -2051,6 +2074,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !TP_RETINEX_LABEL_MASK;Mask
 !TP_RETINEX_LABSPACE;L*a*b*
 !TP_RETINEX_LOW;Low
+!TP_RETINEX_MAP;Method
 !TP_RETINEX_MAP_GAUS;Gaussian mask
 !TP_RETINEX_MAP_MAPP;Sharp mask (wavelet partial)
 !TP_RETINEX_MAP_MAPT;Sharp mask (wavelet total)
@@ -2266,6 +2290,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !TP_WAVELET_TON;Toning
 !TP_WBALANCE_EQBLUERED;Blue/Red equalizer
 !TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behavior of "white balance" by modulating the blue/red balance.\nThis can be useful when shooting conditions:\na) are far from the standard illuminant (e.g. underwater),\nb) are far from conditions where calibrations were performed,\nc) where the matrices or ICC profiles are unsuitable.
+!TP_WBALANCE_PICKER;Pick
 !TP_WBALANCE_TEMPBIAS;AWB temperature bias
 !TP_WBALANCE_TEMPBIAS_TOOLTIP;Allows to alter the computation of the "auto white balance"\nby biasing it towards warmer or cooler temperatures. The bias\nis expressed as a percentage of the computed temperature,\nso that the result is given by "computedTemp + computedTemp * bias".
 !TP_WBALANCE_WATER1;UnderWater 1