Update all language files for translation

rtdata/languages/default

@@ -1703,9 +1703,9 @@ TP_WAVELET_CH1;Whole chromaticity range
 TP_WAVELET_CH2;Saturated/pastel
 TP_WAVELET_CH3;Link contrast levels
 TP_WAVELET_CHCU;Curve
-TP_WAVELET_CHR;Chroma-contrast link strength
 TP_WAVELET_CHRO;Saturated/pastel threshold
 TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored.
+TP_WAVELET_CHR;Chroma-contrast link strength
 TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength"
 TP_WAVELET_CHSL;Sliders
 TP_WAVELET_CHTYPE;Chrominance method
@@ -1713,31 +1713,28 @@ TP_WAVELET_COLORT;Opacity Red-Green
 TP_WAVELET_COMBOTH;Both
 TP_WAVELET_COMPCONT;Contrast
 TP_WAVELET_COMPGAMMA;Compression gamma
-TP_WAVELET_COMPGAMMA_TOOLTIP;Adjust gamma for residual image and compression.\nAllow to equilibrate data and histogram
-TP_WAVELET_COMPGAMMA_TOOLTIP;Adjusting the gamma of the residual image allow you to equilibrate the data and histogram.
+TP_WAVELET_COMPGAMMA_TOOLTIP;Adjusting the gamma of the residual image allows you to equilibrate the data and histogram.
 TP_WAVELET_COMPTM;Tone mapping
-TP_WAVELET_CONTEDIT;'After' Contrast curve
 TP_WAVELET_CONTEDIT;'After' contrast curve
-TP_WAVELET_CONTR;Gamut
-TP_WAVELET_CONTRA;Contrast
 TP_WAVELET_CONTRAST_MINUS;Contrast -
 TP_WAVELET_CONTRAST_PLUS;Contrast +
+TP_WAVELET_CONTRA;Contrast
 TP_WAVELET_CONTRA_TOOLTIP;Changes contrast of the residual image.
+TP_WAVELET_CONTR;Gamut
 TP_WAVELET_CTYPE;Chrominance control
 TP_WAVELET_CURVEEDITOR_CC_TOOLTIP;Modifies local contrast as a function of the original local contrast (absciss)\nLow absciss represents small local contrast (real values about 10..20)\n50% absciss represents average of local contrast (real value about 100..300)\n66% absciss represents standard deviation of local contrast (real value about 300..800)\n100% represents maximum (real value about 3000..8000)
 TP_WAVELET_CURVEEDITOR_CH;Contrast levels=f(Hue)
 TP_WAVELET_CURVEEDITOR_CH_TOOLTIP;Modifies each level's contrast as a function oh hue.\nTake care not to overwrite changes made with the Gamut Hue controls.\nThe curve will only have an effect when wavelet contrast level sliders are non-zero.
 TP_WAVELET_CURVEEDITOR_CL;L
 TP_WAVELET_CURVEEDITOR_CL_TOOLTIP;Applies a final contrast luminance curve at the end of the wavelet treatment.
-TP_WAVELET_CURVEEDITOR_CL_TOOLTIP;Apply a contrast luminance curve at the end of wavelet level threatment
 TP_WAVELET_CURVEEDITOR_HH;HH
 TP_WAVELET_CURVEEDITOR_HH_TOOLTIP;Modifies the residual image's hue as a function of hue.
 TP_WAVELET_DALL;All directions
-TP_WAVELET_DAUB10;D10 - medium
-TP_WAVELET_DAUB14;D14 - high
 TP_WAVELET_DAUB2;D2 - low
 TP_WAVELET_DAUB4;D4 - standard
 TP_WAVELET_DAUB6;D6 - standard plus
+TP_WAVELET_DAUB10;D10 - medium
+TP_WAVELET_DAUB14;D14 - high
 TP_WAVELET_DAUB;Edge performance
 TP_WAVELET_DAUB_TOOLTIP;Changes Daubechies coefficients:\nD4 = Standard,\nD14 = Often best performance, 10% more time-intensive.\n\nAffects edge detection as well as the general quality of the firsts levels. However the quality is not strictly related to this coefficient and can vary with images and uses.
 TP_WAVELET_DONE;Vertical
@@ -1746,12 +1743,12 @@ TP_WAVELET_DTWO;Horizontal
 TP_WAVELET_EDCU;Curve
 TP_WAVELET_EDGCONT;Local contrast
 TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima
-TP_WAVELET_EDGE;Edge Sharpness
-TP_WAVELET_EDGEDETECT;Gradient sensitivity
 TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection)
 TP_WAVELET_EDGEDETECTTHR;Threshold low (noise)
 TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky.
+TP_WAVELET_EDGEDETECT;Gradient sensitivity
 TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise.
+TP_WAVELET_EDGE;Edge Sharpness
 TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
 TP_WAVELET_EDGTHRESH;Detail
 TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
@@ -1790,24 +1787,23 @@ TP_WAVELET_LIPST;Enhanced algorithm
 TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements.
 TP_WAVELET_LOWLIGHT;Shadow luminance range
 TP_WAVELET_MEDGREINF;First level
-TP_WAVELET_MEDI;Reduce artifacts in blue sky
 TP_WAVELET_MEDILEV;Edge detection
+TP_WAVELET_MEDI;Reduce artifacts in blue sky
 TP_WAVELET_NEUTRAL;Neutral
-TP_WAVELET_NOIS;Denoise
 TP_WAVELET_NOISE;Denoise and Refine
-TP_WAVELET_OPACITY;Opacity Blue-Yellow
-TP_WAVELET_OPACITYW;Contrast balance d/v-h curve
+TP_WAVELET_NOIS;Denoise
 TP_WAVELET_OPACITYWL;Final local contrast
-TP_WAVELET_OPACITYWL_TOOLTIP;Modify final local contrast in function of last local contrast (absciss) for all levels decomposition\nTake into account: \na)contrast levels \nb)edge sharpness \nc)contrast balance\nd)decomposition-recomposition\nLow absciss represents small local contrast (real values about 10..20)\n50% absciss represents average of local contrast (real value about 200..1000)\n66% absciss represents standard deviation of local contrast (real value about 1000..2000)\n100% represents maximum (real value about 5000..13000)
 TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right.
+TP_WAVELET_OPACITYW;Contrast balance d/v-h curve
+TP_WAVELET_OPACITY;Opacity Blue-Yellow
 TP_WAVELET_PASTEL;Pastel chromaticity
 TP_WAVELET_PROC;Process
 TP_WAVELET_RE1;Reinforced
 TP_WAVELET_RE2;Unchanged
 TP_WAVELET_RE3;Reduced
 TP_WAVELET_RESCHRO;Chromaticity
-TP_WAVELET_RESCON;Shadows
 TP_WAVELET_RESCONH;Highlights
+TP_WAVELET_RESCON;Shadows
 TP_WAVELET_RESID;Residual Image
 TP_WAVELET_SAT;Saturated chromaticity
 TP_WAVELET_SETTINGS;Wavelet Settings
@@ -1815,15 +1811,15 @@ TP_WAVELET_SKIN;Skin targetting/protection
 TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
 TP_WAVELET_SKY;Sky targetting/protection
 TP_WAVELET_SKY_TOOLTIP;At -100 sky-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 sky-tones are protected while all other tones are affected.
-TP_WAVELET_STREN;Strength
 TP_WAVELET_STRENGTH;Strength
+TP_WAVELET_STREN;Strength
 TP_WAVELET_SUPE;Extra
-TP_WAVELET_THR;Shadows threshold
 TP_WAVELET_THRESHOLD2;Shadow levels
 TP_WAVELET_THRESHOLD2_TOOLTIP;Only levels between 9 and 9 minus the value will be affected by the shadow luminance range. Other levels will be fully treated. The highest level possible is limited by the highlight level value (9 minus highlight level value).
 TP_WAVELET_THRESHOLD;Highlight levels
 TP_WAVELET_THRESHOLD_TOOLTIP;Only levels beyond the chosen value will be affected by the highlight luminance range. Other levels will be fully treated. The chosen value here limits the highest possible value of the shadow levels.
 TP_WAVELET_THRH;Highlights threshold
+TP_WAVELET_THR;Shadows threshold
 TP_WAVELET_TILESBIG;Big tiles
 TP_WAVELET_TILESFULL;Full image
 TP_WAVELET_TILESIZE;Tiling method