Merge branch 'dev' into libraw-copylib
This commit is contained in:
Lawrence Lee
@@ -203,6 +203,7 @@ FILEBROWSER_SHOWRANK4HINT;Show images ranked as 4-star.\nShortcut: <b>Shift-4</b
|
||||
FILEBROWSER_SHOWRANK5HINT;Show images ranked as 5-star.\nShortcut: <b>Shift-5</b>
|
||||
FILEBROWSER_SHOWRECENTLYSAVEDHINT;Show saved images.\nShortcut: <b>Alt-7</b>
|
||||
FILEBROWSER_SHOWRECENTLYSAVEDNOTHINT;Show unsaved images.\nShortcut: <b>Alt-6</b>
|
||||
FILEBROWSER_SHOWRECURSIVE;Show images in sub-folders recursively.
|
||||
FILEBROWSER_SHOWTRASHHINT;Show contents of trash.\nShortcut: <b>Ctrl-t</b>
|
||||
FILEBROWSER_SHOWUNCOLORHINT;Show images without a color label.\nShortcut: <b>Alt-0</b>
|
||||
FILEBROWSER_SHOWUNRANKHINT;Show unranked images.\nShortcut: <b>Shift-0</b>
|
||||
@@ -1310,7 +1311,7 @@ HISTORY_MSG_1078;Local - Red and skin protection
|
||||
HISTORY_MSG_1079;Local - CIECAM Sigmoid strength J
|
||||
HISTORY_MSG_1080;Local - CIECAM Sigmoid threshold
|
||||
HISTORY_MSG_1081;Local - CIECAM Sigmoid blend
|
||||
HISTORY_MSG_1082;Local - CIECAM Sigmoid Q BlackEv WhiteEv
|
||||
HISTORY_MSG_1082;Local - CIECAM Auto threshold
|
||||
HISTORY_MSG_1083;Local - CIECAM Hue
|
||||
HISTORY_MSG_1084;Local - Uses Black Ev - White Ev
|
||||
HISTORY_MSG_1085;Local - Jz lightness
|
||||
@@ -1426,22 +1427,85 @@ HISTORY_MSG_ICL_LABGRIDCIEXY;Cie xy
|
||||
HISTORY_MSG_ICM_AINTENT;Abstract profile intent
|
||||
HISTORY_MSG_ICM_BLUX;Primaries Blue X
|
||||
HISTORY_MSG_ICM_BLUY;Primaries Blue Y
|
||||
HISTORY_MSG_ICM_CAT;Matrix adaptation
|
||||
HISTORY_MSG_ICM_FBW;Black and White
|
||||
HISTORY_MSG_ICM_GAMUT;Gamut control
|
||||
HISTORY_MSG_ICM_GREX;Primaries Green X
|
||||
HISTORY_MSG_ICM_GREY;Primaries Green Y
|
||||
HISTORY_MSG_ICM_MIDTCIE;Midtones
|
||||
HISTORY_MSG_ICM_OUTPUT_PRIMARIES;Output - Primaries
|
||||
HISTORY_MSG_ICM_OUTPUT_TEMP;Output - ICC-v4 illuminant D
|
||||
HISTORY_MSG_ICM_OUTPUT_TYPE;Output - Type
|
||||
HISTORY_MSG_ICM_PRESER;Preserve neutral
|
||||
HISTORY_MSG_ICM_REDX;Primaries Red X
|
||||
HISTORY_MSG_ICM_REDY;Primaries Red Y
|
||||
HISTORY_MSG_ICM_REFI;Refinement Colors
|
||||
HISTORY_MSG_ICM_SHIFTX;Refinement Colors - shift x
|
||||
HISTORY_MSG_ICM_SHIFTY;Refinement Colors - shift y
|
||||
HISTORY_MSG_ICM_SMOOTHCIE;Smooth highlights
|
||||
HISTORY_MSG_ICM_TRCEXP;Abstract Profile
|
||||
HISTORY_MSG_ICM_WORKING_GAMMA;TRC - Gamma
|
||||
HISTORY_MSG_ICM_WORKING_ILLUM_METHOD;Illuminant method
|
||||
HISTORY_MSG_ICM_WORKING_PRIM_METHOD;Primaries method
|
||||
HISTORY_MSG_ICM_WORKING_SLOPE;TRC - Slope
|
||||
HISTORY_MSG_ICM_WORKING_TRC_METHOD;TRC method
|
||||
HISTORY_MSG_ILLUM;CAL - SC - Illuminant
|
||||
HISTORY_MSG_LOCAL_CIE_ANGGRAD;Local CIECAM - gradient angle
|
||||
HISTORY_MSG_LOCAL_CIE_BRICOMP;Local CIECAM Brightness compression
|
||||
HISTORY_MSG_LOCAL_CIE_BRICOMPTH;Local CIECAM Brightness compression threshold
|
||||
HISTORY_MSG_LOCAL_CIE_BWCIE;Local CIECAM - black and white
|
||||
HISTORY_MSG_LOCAL_CIE_CAT;Matrix adaptation
|
||||
HISTORY_MSG_LOCAL_CIE_DETAILJZ;Local JzCzHz Local contrast
|
||||
HISTORY_MSG_LOCAL_CIE_ENAMASKALL;Local CIECAM All mask tools
|
||||
HISTORY_MSG_LOCAL_CIE_EXPPRECAM;Local CIECAM Pre-Cam
|
||||
HISTORY_MSG_LOCAL_CIE_GAM;Local CIECAM Gamma
|
||||
HISTORY_MSG_LOCAL_CIE_GAMUTCIE;Local CIECAM Gamut
|
||||
HISTORY_MSG_LOCAL_CIE_ILL;Local CIECAM TRC Illuminant
|
||||
HISTORY_MSG_LOCAL_CIE_LOGCIEQ;Local CIECAM Log encoding Q
|
||||
HISTORY_MSG_LOCAL_CIE_MIDT;Local CIECAM Mid Tones
|
||||
HISTORY_MSG_LOCAL_CIE_NORM;Local CIECAM Normalize L
|
||||
HISTORY_MSG_LOCAL_CIE_PRIM;Local CIECAM TRC Primaries
|
||||
HISTORY_MSG_LOCAL_CIE_REFI;Local CIECAM Refinement Colors
|
||||
HISTORY_MSG_LOCAL_CIE_SIG;Sigmoid
|
||||
HISTORY_MSG_LOCAL_CIE_SIGADAP;Local CIECAM Sigmoid adaptability
|
||||
HISTORY_MSG_LOCAL_CIE_SIGMET;Local CIECAM - Sigmoid method
|
||||
HISTORY_MSG_LOCAL_CIE_SLOP;Local CIECAM - Slope
|
||||
HISTORY_MSG_LOCAL_CIE_SLOPESMO;Local CIECAM - Gray balance
|
||||
HISTORY_MSG_LOCAL_CIE_SLOPESMOR;Local CIECAM - Red balance
|
||||
HISTORY_MSG_LOCAL_CIE_SLOPESMOG;Local CIECAM - Green balance
|
||||
HISTORY_MSG_LOCAL_CIE_SLOPESMOB;Local CIECAM - Blue balance
|
||||
HISTORY_MSG_LOCAL_CIE_SMOOTHMET;Local CIECAM - Smooth lights method
|
||||
HISTORY_MSG_LOCAL_CIE_STRGRAD;Local CIECAM - gradient strength L
|
||||
HISTORY_MSG_LOCAL_CIE_TRC;Local CIECAM - TRC
|
||||
HISTORY_MSG_LOCAL_CIE_REDXL;Local CIECAM - Red X
|
||||
HISTORY_MSG_LOCAL_CIE_REDYL;Local CIECAM - Red Y
|
||||
HISTORY_MSG_LOCAL_CIE_GREXL;Local CIECAM - Green X
|
||||
HISTORY_MSG_LOCAL_CIE_GREYL;Local CIECAM - Green Y
|
||||
HISTORY_MSG_LOCAL_CIE_BLACKS;Local CIECAM - Blacks distribution
|
||||
HISTORY_MSG_LOCAL_CIE_BLUXL;Local CIECAM - Blue X
|
||||
HISTORY_MSG_LOCAL_CIE_BLUYL;Local CIECAM - Blue Y
|
||||
HISTORY_MSG_LOCAL_CIE_SHIFTXL;Local CIECAM - Shift x
|
||||
HISTORY_MSG_LOCAL_CIE_SHIFTYL;Local CIECAM - Shift y
|
||||
HISTORY_MSG_LOCAL_CIE_SMOOTH;Local CIECAM - Scale Yb Scene
|
||||
HISTORY_MSG_LOCAL_CIE_SMOOTHYB;Local CIECAM - Scale Yb Viewing
|
||||
HISTORY_MSG_LOCAL_CIE_SMOOTH_LUM;Local CIECAM - levels - luminosity mode
|
||||
HISTORY_MSG_LOCAL_CIE_SATCIE;Local CIECAM - Saturation control
|
||||
HISTORY_MSG_LOCAL_CIE_STRLOG;Local CIECAM - Log encoding strength
|
||||
HISTORY_MSG_LOCAL_CIE_WHITES;Local CIECAM - Whites distribution
|
||||
HISTORY_MSG_LOCAL_CIEMASK_BLURCONT;Local Cie mask blur contrast
|
||||
HISTORY_MSG_LOCAL_CIEMASK_BLURFFT;Local Cie mask blur fftw
|
||||
HISTORY_MSG_LOCAL_CIEMASK_BLURRAD;Local Cie mask blur radius
|
||||
HISTORY_MSG_LOCAL_CIEMASK_CHH;Local Cie mask curve hh
|
||||
HISTORY_MSG_LOCAL_CIEMASK_HIGH;Local Cie mask highlights
|
||||
HISTORY_MSG_LOCAL_CIEMASK_SHAD;Local Cie mask shadows
|
||||
HISTORY_MSG_LOCAL_CIEMASK_STRU;Local Cie mask structure
|
||||
HISTORY_MSG_LOCAL_CIEMASK_STRU_TOOL;Local Cie mask structure as tool
|
||||
HISTORY_MSG_LOCAL_CIEMASK_WLC;Local CIECAM mask wavelet Lc
|
||||
HISTORY_MSG_LOCAL_CIEMASK_WLEV;Local CIECAM mask wavelet levels
|
||||
HISTORY_MSG_LOCAL_LOG_BLACKS;Local Log - Blacks distribution
|
||||
HISTORY_MSG_LOCAL_LOG_COMPR;Local Log - Compress brightness
|
||||
HISTORY_MSG_LOCAL_LOG_SAT;Local Log - Saturation control
|
||||
HISTORY_MSG_LOCAL_LOG_WHITES;Local Log - Whites distribution
|
||||
HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness
|
||||
HISTORY_MSG_LOCALCONTRAST_ENABLED;Local Contrast
|
||||
@@ -1691,15 +1755,15 @@ MAIN_TAB_DETAIL;Detail
|
||||
MAIN_TAB_DETAIL_TOOLTIP;Shortcut: <b>Alt-d</b>
|
||||
MAIN_TAB_DEVELOP; Batch Edit
|
||||
MAIN_TAB_EXIF;Exif
|
||||
MAIN_TAB_EXPORT; Fast Export
|
||||
MAIN_TAB_EXPORT; Fast Export
|
||||
MAIN_TAB_EXPOSURE;Exposure
|
||||
MAIN_TAB_EXPOSURE_TOOLTIP;Shortcut: <b>Alt-e</b>
|
||||
MAIN_TAB_FAVORITES;Favorites
|
||||
MAIN_TAB_FAVORITES_TOOLTIP;Shortcut: <b>Alt-u</b>
|
||||
MAIN_TAB_FILTER; Filter
|
||||
MAIN_TAB_FILTER; Filter
|
||||
MAIN_TAB_INSPECT; Inspect
|
||||
MAIN_TAB_IPTC;IPTC
|
||||
MAIN_TAB_LOCALLAB;Local
|
||||
MAIN_TAB_LOCALLAB;Selective Editing
|
||||
MAIN_TAB_LOCALLAB_TOOLTIP;Shortcut: <b>Alt-o</b>
|
||||
MAIN_TAB_METADATA;Metadata
|
||||
MAIN_TAB_METADATA_TOOLTIP;Shortcut: <b>Alt-m</b>
|
||||
@@ -1786,8 +1850,8 @@ PARTIALPASTE_LABCURVE;L*a*b* adjustments
|
||||
PARTIALPASTE_LENSGROUP;Lens Related Settings
|
||||
PARTIALPASTE_LENSPROFILE;Profiled lens correction
|
||||
PARTIALPASTE_LOCALCONTRAST;Local contrast
|
||||
PARTIALPASTE_LOCALLAB;Local Adjustments
|
||||
PARTIALPASTE_LOCALLABGROUP;Local Adjustments Settings
|
||||
PARTIALPASTE_LOCALLAB;Selective Editing
|
||||
PARTIALPASTE_LOCALLABGROUP;Selective Editing Settings
|
||||
PARTIALPASTE_METADATA;Metadata mode
|
||||
PARTIALPASTE_METAGROUP;Metadata settings
|
||||
PARTIALPASTE_PCVIGNETTE;Vignette filter
|
||||
@@ -1834,7 +1898,6 @@ PREFERENCES_APPEARANCE_COLORPICKERFONT;Color picker font
|
||||
PREFERENCES_APPEARANCE_CROPMASKCOLOR;Crop mask color
|
||||
PREFERENCES_APPEARANCE_MAINFONT;Main font
|
||||
PREFERENCES_APPEARANCE_NAVGUIDECOLOR;Navigator guide color
|
||||
PREFERENCES_APPEARANCE_PSEUDOHIDPI;Pseudo-HiDPI mode
|
||||
PREFERENCES_APPEARANCE_THEME;Theme
|
||||
PREFERENCES_APPLNEXTSTARTUP;restart required
|
||||
PREFERENCES_AUTOMONPROFILE;Use operating system's main monitor color profile
|
||||
@@ -1845,6 +1908,9 @@ PREFERENCES_BEHADDALLHINT;Set all parameters to the <b>Add</b> mode.\nAdjustment
|
||||
PREFERENCES_BEHAVIOR;Behavior
|
||||
PREFERENCES_BEHSETALL;All to 'Set'
|
||||
PREFERENCES_BEHSETALLHINT;Set all parameters to the <b>Set</b> mode.\nAdjustments of parameters in the batch tool panel will be <b>absolute</b>, the actual values will be displayed.
|
||||
PREFERENCES_BROWSERECURSIVEDEPTH;Browse sub-folders depth
|
||||
PREFERENCES_BROWSERECURSIVEFOLLOWLINKS;Follow symbolic links when browsing sub-folders
|
||||
PREFERENCES_BROWSERECURSIVEMAXDIRS;Maximum sub-folders
|
||||
PREFERENCES_CACHECLEAR;Clear
|
||||
PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
|
||||
PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
|
||||
@@ -2019,6 +2085,7 @@ PREFERENCES_SND_HELP;Enter a full file path to set a sound, or leave blank for n
|
||||
PREFERENCES_SND_LNGEDITPROCDONE;Editor processing done
|
||||
PREFERENCES_SND_QUEUEDONE;Queue processing done
|
||||
PREFERENCES_SND_THRESHOLDSECS;After seconds
|
||||
PREFERENCES_SPOTLOC;Define Spot method for Local Adjustments
|
||||
PREFERENCES_STARTUPIMDIR;Image Directory at Startup
|
||||
PREFERENCES_TAB_BROWSER;File Browser
|
||||
PREFERENCES_TAB_COLORMGR;Color Management
|
||||
@@ -2032,6 +2099,7 @@ PREFERENCES_THUMBNAIL_INSPECTOR_JPEG;Embedded JPEG preview
|
||||
PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
|
||||
PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
|
||||
PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
|
||||
PREFERENCES_THUMBNAIL_RANK_COLOR_MODE;Load/Save thumbnail rank and color from/to XMP sidecars
|
||||
PREFERENCES_TOOLPANEL_AVAILABLETOOLS;Available Tools
|
||||
PREFERENCES_TOOLPANEL_CLONE_FAVORITES;Keep favorite tools in original locations
|
||||
PREFERENCES_TOOLPANEL_CLONE_FAVORITES_TOOLTIP;If set, favorite tools will appear in both the favorites tab and their original tabs.\n\nNote: Enabling this option may result in a slight delay when switching tabs.
|
||||
@@ -2052,7 +2120,7 @@ PREFERENCES_WBANOPURP;No purple color used
|
||||
PREFERENCES_WBAPATCH;Number maximum of colors used in picture
|
||||
PREFERENCES_WBAPRECIS;Precision algorithm - scale used
|
||||
PREFERENCES_WBASIZEREF;Size of reference color compare to size of histogram color
|
||||
PREFERENCES_WBASORT;Sort in chroma order instead of histogram
|
||||
PREFERENCES_WBASORT;Sort in chroma order instead of histogram
|
||||
PREFERENCES_WORKFLOW;Layout
|
||||
PREFERENCES_XMP_SIDECAR_MODE;XMP sidecar style
|
||||
PREFERENCES_XMP_SIDECAR_MODE_EXT;darktable-like (FILENAME.ext.xmp for FILENAME.ext)
|
||||
@@ -2174,6 +2242,7 @@ TC_PRIM_GREX;Gx
|
||||
TC_PRIM_GREY;Gy
|
||||
TC_PRIM_REDX;Rx
|
||||
TC_PRIM_REDY;Ry
|
||||
TC_PRIM_REFI;Refine colors (white-point)
|
||||
THRESHOLDSELECTOR_B;Bottom
|
||||
THRESHOLDSELECTOR_BL;Bottom-left
|
||||
THRESHOLDSELECTOR_BR;Bottom-right
|
||||
@@ -2624,6 +2693,7 @@ TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). Th
|
||||
TP_ICM_APPLYLOOKTABLE;Look table
|
||||
TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
|
||||
TP_ICM_BPC;Black Point Compensation
|
||||
TP_ICM_BW;Black and White
|
||||
TP_ICM_DCPILLUMINANT;Illuminant
|
||||
TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
|
||||
TP_ICM_DCPILLUMINANT_TOOLTIP;Select which embedded DCP illuminant to employ. Default is 'interpolated' which is a mix between the two based on white balance. The setting is only available if a dual-illuminant DCP with interpolation support is selected.
|
||||
@@ -2637,8 +2707,8 @@ TP_ICM_INPUTCAMERA_TOOLTIP;Use a simple color matrix from dcraw, an enhanced Raw
|
||||
TP_ICM_INPUTCUSTOM;Custom
|
||||
TP_ICM_INPUTCUSTOM_TOOLTIP;Select your own DCP/ICC color profile file for the camera.
|
||||
TP_ICM_INPUTDLGLABEL;Select Input DCP/ICC Profile...
|
||||
TP_ICM_INPUTEMBEDDED;Use embedded, if possible
|
||||
TP_ICM_INPUTEMBEDDED_TOOLTIP;Use color profile embedded in non-raw files.
|
||||
TP_ICM_INPUTEMBEDDED;Use embedded
|
||||
TP_ICM_INPUTEMBEDDED_TOOLTIP;Use the color profile embedded in the file.\nIf unavailable, fall back to Camera standard
|
||||
TP_ICM_INPUTNONE;No profile
|
||||
TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases.
|
||||
TP_ICM_INPUTPROFILE;Input Profile
|
||||
@@ -2661,9 +2731,16 @@ TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile
|
||||
TP_ICM_TONECURVE;Tone curve
|
||||
TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only available if the selected DCP has a tone curve.
|
||||
TP_ICM_TRCFRAME;Abstract Profile
|
||||
TP_ICM_TRCFRAME_TOOLTIP;Also known as 'synthetic' or 'virtual' profiles, which are applied at the end of the processing pipeline (prior to ciecam) allowing you to create custom image effects.\nYou can make changes to the:\n 'Tone response curve', which modifies the tones of the image.\n 'Illuminant' : which allows you to change the profile primaries to adapt them to the shooting conditions.\n 'Destination primaries': which allows you to change the destination primaries with two main uses - channel mixer and calibration.\nNote: Abstract profiles take into account the built-in Working profiles without modifying them. They do not work with custom Working profiles.
|
||||
TP_ICM_TRCFRAME_TOOLTIP;Also known as 'synthetic' or 'virtual' profiles, which are applied at the end of the processing pipeline (prior to ciecam) allowing you to create custom image effects.\nYou can make changes to the:\n 'Tone response curve', which modifies the tones of the image.\n 'Illuminant' : which allows you to change the profile primaries to adapt them to the shooting conditions.\n 'Destination primaries': which allows you to change the destination primaries with three main uses - channel mixer, restore image color (saturation), calibration.\nNote: Abstract profiles take into account the built-in Working profiles without modifying them. They do not work with custom Working profiles.
|
||||
TP_ICM_TRC_TOOLTIP;Allows you to change the default sRGB 'Tone response curve' in RT (g=2.4 s=12.92).\nThis TRC modifies the tones of the image. The RGB and Lab values, histogram and output (screen, TIF, JPG) are changed:\n-Gamma acts mainly on light tones -Slope acts mainly on dark tones.\nYou can choose any pair of 'gamma and slope' (values >1) and the algorithm will ensure that there is continuity between the linear and parabolic parts of the curve.\nA selection other than 'none' activates the 'Illuminant' and 'Destination primaries' menus.
|
||||
TP_ICM_WORKINGPROFILE;Working Profile
|
||||
TP_ICM_WORKING_CAT;Matrix adaptation
|
||||
TP_ICM_WORKING_CAT_BRAD;Bradford
|
||||
TP_ICM_WORKING_CAT_CAT16;Cat16
|
||||
TP_ICM_WORKING_CAT_CAT02;Cat02
|
||||
TP_ICM_WORKING_CAT_TOOLTIP;Performs the chromatic adaptation of the XYZ conversion matrix. Default Bradford
|
||||
TP_ICM_WORKING_CAT_VK;Von Kries
|
||||
TP_ICM_WORKING_CAT_XYZ;XYZ scale
|
||||
TP_ICM_WORKING_CIEDIAG;CIE xy diagram
|
||||
TP_ICM_WORKING_ILLU;Illuminant
|
||||
TP_ICM_WORKING_ILLU_1500;Tungsten 1500K
|
||||
@@ -2675,10 +2752,13 @@ TP_ICM_WORKING_ILLU_D60;D60
|
||||
TP_ICM_WORKING_ILLU_D65;D65
|
||||
TP_ICM_WORKING_ILLU_D80;D80
|
||||
TP_ICM_WORKING_ILLU_D120;D120
|
||||
TP_ICM_WORKING_ILLU_E;E
|
||||
TP_ICM_WORKING_ILLU_NONE;Default
|
||||
TP_ICM_WORKING_ILLU_STDA;stdA 2875K
|
||||
TP_ICM_WORKING_NON;None
|
||||
TP_ICM_WORKING_PRESER;Preserves Pastel tones
|
||||
TP_ICM_WORKING_PRIM;Destination primaries
|
||||
TP_ICM_WORKING_PRIM_TOOLTIP;Destination primaries (Advanced): which allows you to change the destination primaries to restore or change image color (saturation), the color balance is significantly preserved when the 'Working Profile' and the 'Destination primaries' are not too different, 'Working Profiles' are not modified. Perform a gamut control.\nWhen 'Custom LA (sliders)' is selected you can modify the values of the 3 primaries Red, Green, Blue for X and Y.
|
||||
TP_ICM_WORKING_PRIMFRAME_TOOLTIP;When 'Custom CIE xy diagram' is selected in 'Destination- primaries'' combobox, you can modify the values of the 3 primaries directly on the graph.\nNote that in this case, the white point position on the graph will not be updated.
|
||||
TP_ICM_WORKING_PRIM_AC0;ACESp0
|
||||
TP_ICM_WORKING_PRIM_ACE;ACESp1
|
||||
@@ -2688,7 +2768,9 @@ TP_ICM_WORKING_PRIM_BRU;BruceRGB
|
||||
TP_ICM_WORKING_PRIM_BST;BestRGB
|
||||
TP_ICM_WORKING_PRIM_CUS;Custom (sliders)
|
||||
TP_ICM_WORKING_PRIM_CUSGR;Custom (CIE xy Diagram)
|
||||
TP_ICM_WORKING_PRIM_FREE;Custom LA (sliders)
|
||||
TP_ICM_WORKING_PRIM_JDCMAX;JDC Max
|
||||
TP_ICM_WORKING_PRIM_JDCMAXSTDA;JDC Max stdA
|
||||
TP_ICM_WORKING_PRIM_NONE;Default
|
||||
TP_ICM_WORKING_PRIM_PROP;ProPhoto
|
||||
TP_ICM_WORKING_PRIM_REC;Rec2020
|
||||
@@ -2769,9 +2851,9 @@ TP_LOCALLAB_AMOUNT;Amount
|
||||
TP_LOCALLAB_ARTIF;Shape detection
|
||||
TP_LOCALLAB_ARTIF_TOOLTIP;ΔE scope threshold increases the range of ΔE scope. High values are for very wide gamut images.\nIncreasing ΔE decay can improve shape detection, but can also reduce the scope.
|
||||
TP_LOCALLAB_AUTOGRAY;Auto mean luminance (Yb%)
|
||||
TP_LOCALLAB_AUTOGRAYCIE;Auto
|
||||
TP_LOCALLAB_AUTOGRAYCIE;Automatic
|
||||
TP_LOCALLAB_AVOID;Avoid color shift
|
||||
TP_LOCALLAB_AVOIDCOLORSHIFT_TOOLTIP;Fit colors into gamut of the working color space and apply Munsell correction (Uniform Perceptual Lab).\nMunsell correction always disabled when Jz or CAM16 or Color Appearance and Lighting is used.\n\nDefault: Munsell.\nMunsell correction: fixes Lab mode hue drifts due to non-linearity, when chromaticity is changed (Uniform Perceptual Lab).\nLab: applies a gamut control, in relative colorimetric, Munsell is then applied.\nXYZ Absolute, applies gamut control, in absolute colorimetric, Munsell is then applied.\nXYZ Relative, applies gamut control, in relative colorimetric, Munsell is then applied.
|
||||
TP_LOCALLAB_AVOIDCOLORSHIFT_TOOLTIP;Fit colors into gamut of the working color space and apply Munsell correction (Uniform Perceptual Lab).\n\nDefault: Munsell only.\nMunsell only, fixes Lab mode hue drifts due to non-linearity, when chromaticity is changed (Uniform Perceptual Lab).\nLab, applies a gamut control, in relative colorimetric, Munsell is then applied.\nXYZ Absolute, applies gamut control, in absolute colorimetric, Munsell is then applied.\nXYZ Relative, applies gamut control, in relative colorimetric, Munsell is then applied. The result is not the same as Lab.
|
||||
TP_LOCALLAB_AVOIDMUN;Munsell correction only
|
||||
TP_LOCALLAB_AVOIDMUN_TOOLTIP;Munsell correction always disabled when Jz or CAM16 is used.
|
||||
TP_LOCALLAB_AVOIDRAD;Soft radius
|
||||
@@ -2814,9 +2896,12 @@ TP_LOCALLAB_BUTTON_DEL;Delete
|
||||
TP_LOCALLAB_BUTTON_DUPL;Duplicate
|
||||
TP_LOCALLAB_BUTTON_REN;Rename
|
||||
TP_LOCALLAB_BUTTON_VIS;Show/Hide
|
||||
TP_LOCALLAB_BWEVNONE;None
|
||||
TP_LOCALLAB_BWEVSIG;Activated
|
||||
TP_LOCALLAB_BWEVSIGLOG;Sigmoid & Log-Encoding
|
||||
TP_LOCALLAB_BWFORCE;Uses Black Ev & White Ev
|
||||
TP_LOCALLAB_CAM16PQREMAP;HDR PQ (Peak Luminance)
|
||||
TP_LOCALLAB_CAM16PQREMAP_TOOLTIP;PQ (Perceptual Quantizer) adapted to CAM16. Allows you to change the internal PQ function (usually 10000 cd/m2 - default 100 cd/m2 - disabled for 100 cd/m2).\nCan be used to adapt to different devices and images.
|
||||
TP_LOCALLAB_CAM16PQREMAP_TOOLTIP;PQ (Perceptual Quantizer) adapted to CAM16 (experimental). Allows you to change the internal PQ function (usually 10000 cd/m2 - default 100 cd/m2 - disabled for 100 cd/m2).\nCan be used to adapt to different devices and images. For example to match Cam16 processing with the maximum monitor brightness of 400cd/m2.
|
||||
TP_LOCALLAB_CAM16_FRA;Cam16 Image Adjustments
|
||||
TP_LOCALLAB_CAMMODE;CAM model
|
||||
TP_LOCALLAB_CAMMODE_CAM16;CAM 16
|
||||
@@ -2843,6 +2928,12 @@ TP_LOCALLAB_CHROMASK_TOOLTIP;Changes the chroma of the mask if one exists (i.e.
|
||||
TP_LOCALLAB_CHROML;Chroma (C)
|
||||
TP_LOCALLAB_CHRRT;Chroma
|
||||
TP_LOCALLAB_CIE;Color appearance (Cam16 & JzCzHz)
|
||||
TP_LOCALLAB_CIE_SMOOTH_NONE;None
|
||||
TP_LOCALLAB_CIE_SMOOTH_EV;Ev based
|
||||
TP_LOCALLAB_CIE_SMOOTHFRAME;Highlight attenuation & Levels
|
||||
TP_LOCALLAB_CIE_SMOOTH_GAMMA;Slope based
|
||||
TP_LOCALLAB_CIE_SMOOTH_GAMMA ROLLOFF;Gamma based
|
||||
TP_LOCALLAB_CIE_SMOOTH_LEVELS;Levels
|
||||
TP_LOCALLAB_CIEC;Use Ciecam environment parameters
|
||||
TP_LOCALLAB_CIECAMLOG_TOOLTIP;This module is based on the CIECAM color appearance model which was designed to better simulate how human vision perceives colors under different lighting conditions.\nThe first Ciecam process 'Scene conditions' is carried out by Log encoding, it also uses 'Absolute luminance' at the time of shooting.\nThe second Ciecam process 'Image adjustments' is simplified and uses only 3 variables (local contrast, contrast J, saturation s).\nThe third Ciecam process 'Viewing conditions' adapts the output to the intended viewing conditions (monitor, TV, projector, printer, etc.) so that the chromatic and contrast appearance is preserved across the display environment.
|
||||
TP_LOCALLAB_CIECOLORFRA;Color
|
||||
@@ -2871,16 +2962,20 @@ TP_LOCALLAB_CLARI_TOOLTIP;Levels 0 to 4 (included): 'Sharp mask' is enabled\nLev
|
||||
TP_LOCALLAB_CLIPTM;Clip restored data (gain)
|
||||
TP_LOCALLAB_COFR;Color & Light
|
||||
TP_LOCALLAB_COLORDE;ΔE preview color - intensity
|
||||
TP_LOCALLAB_COLORDEPREV_TOOLTIP;Preview ΔE button will only work if you have activated one (and only one) of the tools in 'Add tool to current spot' menu.\nTo be able to preview ΔE with several tools enabled, use Mask and modifications - Preview ΔE.
|
||||
TP_LOCALLAB_COLORDEPREV_TOOLTIP;Preview ΔE button in Settings will only work if you have activated 'Sharpening' or 'Soft Light and Original Retinex' or 'Blur/Grain and Denoise' or 'Dehaze and Retinex' or 'Contrast by Detail Levels' in 'Add tool to current spot' menu.\nFor others tools Preview ΔE button is 'in the tool' - to be able to preview ΔE with several tools enabled, use preferably Mask and modifications.
|
||||
TP_LOCALLAB_COLORDE_TOOLTIP;Show a blue color preview for ΔE selection if negative and green if positive.\n\nMask and modifications (show modified areas without mask): show actual modifications if positive, show enhanced modifications (luminance only) with blue and yellow if negative.
|
||||
TP_LOCALLAB_COLORSCOPE;Scope (color tools)
|
||||
TP_LOCALLAB_COLORSCOPE_TOOLTIP;Common Scope slider for Color and Light, Shadows/Highlights, Vibrance.\nOther tools have their own scope controls.
|
||||
TP_LOCALLAB_COLOR_CIE;Color curve
|
||||
TP_LOCALLAB_COLOR_TOOLNAME;Color & Light
|
||||
TP_LOCALLAB_COLORFRAME;Dominant color
|
||||
TP_LOCALLAB_COL_NAME;Name
|
||||
TP_LOCALLAB_COL_VIS;Status
|
||||
TP_LOCALLAB_COMPFRA;Directional contrast
|
||||
TP_LOCALLAB_COMPREFRA;Wavelet level tone mapping
|
||||
TP_LOCALLAB_COMPRCIE;Brightness compression
|
||||
TP_LOCALLAB_COMPRCIETH;Compression threshold
|
||||
TP_LOCALLAB_COMPRLOG_TOOLTIP;This algorithm compress the data before log conversion, above the theshold slider value. To use in conjunction with Whites distribution.
|
||||
TP_LOCALLAB_CONTCOL;Contrast threshold
|
||||
TP_LOCALLAB_CONTFRA;Contrast by level
|
||||
TP_LOCALLAB_CONTRAST;Contrast
|
||||
@@ -2911,7 +3006,7 @@ TP_LOCALLAB_DELTAD;Delta balance
|
||||
TP_LOCALLAB_DELTAEC;ΔE Image mask
|
||||
TP_LOCALLAB_DENOI1_EXP;Denoise based on luminance mask
|
||||
TP_LOCALLAB_DENOI2_EXP;Recovery based on luminance mask
|
||||
TP_LOCALLAB_DENOIBILAT_TOOLTIP;Allows you to reduce impulse or 'salt & pepper' noise.
|
||||
TP_LOCALLAB_DENOIBILAT_TOOLTIP;Allows you to reduce impulse or 'salt & pepper' noise.
|
||||
TP_LOCALLAB_DENOICHROC_TOOLTIP;Allows you to deal with blotches and packets of noise.
|
||||
TP_LOCALLAB_DENOICHRODET_TOOLTIP;Allows you to recover chrominance detail by progressively applying a Fourier transform (DCT).
|
||||
TP_LOCALLAB_DENOICHROF_TOOLTIP;Allows you to adjust fine-detail chrominance noise.
|
||||
@@ -2931,6 +3026,7 @@ TP_LOCALLAB_DETAIL;Local contrast
|
||||
TP_LOCALLAB_DETAILFRA;Edge detection - DCT
|
||||
TP_LOCALLAB_DETAILSH;Details
|
||||
TP_LOCALLAB_DETAILTHR;Lum/chrom detail threshold
|
||||
TP_LOCALLAB_DISAB_CIECAM;Disable Ciecam or Weak Jz surround
|
||||
TP_LOCALLAB_DIVGR;Gamma
|
||||
TP_LOCALLAB_DUPLSPOTNAME;Copy
|
||||
TP_LOCALLAB_EDGFRA;Edge sharpness
|
||||
@@ -2938,6 +3034,7 @@ TP_LOCALLAB_EDGSHOW;Show all tools
|
||||
TP_LOCALLAB_ELI;Ellipse
|
||||
TP_LOCALLAB_ENABLE_AFTER_MASK;Use Tone Mapping
|
||||
TP_LOCALLAB_ENABLE_MASK;Enable mask
|
||||
TP_LOCALLAB_ENABLE_MASKALL;Enable all mask tools
|
||||
TP_LOCALLAB_ENABLE_MASKAFT;Use all algorithms Exposure
|
||||
TP_LOCALLAB_ENARETIMASKTMAP_TOOLTIP;If enabled the Mask uses Restored Data after Transmission Map instead of Original data.
|
||||
TP_LOCALLAB_ENH;Enhanced
|
||||
@@ -2954,9 +3051,10 @@ TP_LOCALLAB_EV_VIS_ALL;Show all
|
||||
TP_LOCALLAB_EXCLUF;Excluding
|
||||
TP_LOCALLAB_EXCLUF_TOOLTIP;'Excluding' mode prevents adjacent spots from influencing certain parts of the image. Adjusting 'Scope' will extend the range of colors.\n You can also add tools to an Excluding spot and use them in the same way as for a normal spot.
|
||||
TP_LOCALLAB_EXCLUTYPE;Spot method
|
||||
TP_LOCALLAB_EXCLUTYPE_TOOLTIP;Normal spot uses recursive data.\n\nExcluding spot reinitializes all local adjustment data.\nCan be used to totally or partially cancel a previous action or to carry out operations in Inverse mode.\n\n'Full image' allows you to use the local adjustment tools on the whole image.\n The RT Spot delimiters are set beyond the image preview boundaries.\n The transition is set to 100.\nNote, you may have to reposition the RT Spot slightly and adjust the Spot size to get the desired effect.\nPlease note: using Denoise or Wavelet or FFTW in full-image mode uses large amounts of memory and may cause the application to crash on lower capacity systems.
|
||||
TP_LOCALLAB_EXCLUTYPE_TOOLTIP;Normal spot uses recursive data.\n\nExcluding spot reinitializes all local adjustment data.\nCan be used to totally or partially cancel a previous action or to carry out operations in Inverse mode.\nUse 'Scope' (Excluding) to set the exclusion intensity.\n\n'Full image' allows you to use the local adjustment tools on the whole image.\n The RT Spot delimiters are set beyond the image preview boundaries.\n The transition is set to 100.\nNote, you may have to reposition the RT Spot slightly and adjust the Spot size to get the desired effect.\nPlease note: using Denoise or Wavelet or FFTW in full-image mode uses large amounts of memory and may cause the application to crash on lower capacity systems.\n\n'Global' allows you to use the local adjustment tools on the whole image, without using deltaE or transitions.
|
||||
TP_LOCALLAB_EXECLU;Excluding spot
|
||||
TP_LOCALLAB_EXFULL;Full image
|
||||
TP_LOCALLAB_EXMAIN;Global
|
||||
TP_LOCALLAB_EXNORM;Normal spot
|
||||
TP_LOCALLAB_EXPCBDL_TOOLTIP;Can be used to remove marks on the sensor or lens by reducing the contrast on the appropriate detail level(s).
|
||||
TP_LOCALLAB_EXPCHROMA;Chroma compensation
|
||||
@@ -2969,7 +3067,7 @@ TP_LOCALLAB_EXPCONTRASTPYR_TOOLTIP;See the documentation for Wavelet Levels.\nTh
|
||||
TP_LOCALLAB_EXPCONTRAST_TOOLTIP;Avoid spots that are too small ( < 32x32 pixels).\nUse low 'Transition value' and high 'Transition decay' and 'Scope' to simulate small spots and deal with defects.\nUse 'Clarity and Sharp mask and Blend and Soften Images' if necessary by adjusting 'Soft radius' to reduce artifacts.
|
||||
TP_LOCALLAB_EXPCURV;Curves
|
||||
TP_LOCALLAB_EXPGRAD;Graduated Filter
|
||||
TP_LOCALLAB_EXPGRADCOL_TOOLTIP;A graduated filter is available in Color and Light (luminance, chrominance & hue gradients, and 'Merge file'), Exposure (luminance grad.), Exposure Mask (luminance grad.), Shadows/Highlights (luminance grad.), Vibrance (luminance, chrominance & hue gradients), Local contrast & wavelet pyramid (local contrast grad.).\nFeather is located in Settings.
|
||||
TP_LOCALLAB_EXPGRADCOL_TOOLTIP;A graduated filter is available in Color and Light (luminance, chrominance & hue gradients, and 'Merge file'), Exposure (luminance grad.), Exposure Mask (luminance grad.), Shadows/Highlights (luminance grad.), Vibrance (luminance, chrominance & hue gradients), Local contrast & wavelet pyramid (local contrast grad.).\nFeather is located in Settings.
|
||||
TP_LOCALLAB_EXPLAPBAL_TOOLTIP;Changes the transformed/original image blend.
|
||||
TP_LOCALLAB_EXPLAPGAMM_TOOLTIP;Changes the behaviour for images with too much or too little contrast by adding a gamma curve before and after the Laplace transform.
|
||||
TP_LOCALLAB_EXPLAPLIN_TOOLTIP;Changes the behaviour for underexposed images by adding a linear component prior to applying the Laplace transform.
|
||||
@@ -3088,7 +3186,7 @@ TP_LOCALLAB_JZTARGET_EV;Viewing Mean luminance (Yb%)
|
||||
TP_LOCALLAB_JZTHRHCIE;Threshold Chroma for Jz(Hz)
|
||||
TP_LOCALLAB_JZWAVEXP;Wavelet Jz
|
||||
TP_LOCALLAB_LABBLURM;Blur Mask
|
||||
TP_LOCALLAB_LABEL;Local Adjustments
|
||||
TP_LOCALLAB_LABEL;Selective Editing
|
||||
TP_LOCALLAB_LABGRID;Color correction grid
|
||||
TP_LOCALLAB_LABGRIDMERG;Background
|
||||
TP_LOCALLAB_LABGRID_VALUES;High(a)=%1 High(b)=%2\nLow(a)=%3 Low(b)=%4
|
||||
@@ -3133,8 +3231,11 @@ TP_LOCALLAB_LOGAUTOGRAY_TOOLTIP;Automatically calculates the 'Mean luminance' fo
|
||||
TP_LOCALLAB_LOGAUTO_TOOLTIP;Pressing this button will calculate the dynamic range and 'Mean luminance' for the scene conditions if the 'Auto mean luminance (Yb%)' is checked).\nAlso calculates the absolute luminance at the time of shooting.\nPress the button again to adjust the automatically calculated values.
|
||||
TP_LOCALLAB_LOGBASE_TOOLTIP;Default = 2.\nValues less than 2 reduce the action of the algorithm making the shadows darker and the highlights brighter.\nWith values greater than 2, the shadows are grayer and the highlights become more washed out.
|
||||
TP_LOCALLAB_LOGCATAD_TOOLTIP;Chromatic adaptation allows us to interpret a color according to its spatio-temporal environment.\nUseful when the white balance deviates significantly from the D50 reference.\nAdapts colors to the illuminant of the output device.
|
||||
TP_LOCALLAB_LOGCIE;Log encoding instead of Sigmoid
|
||||
TP_LOCALLAB_LOGCIE_TOOLTIP;Allows you tu use Black Ev, White Ev, Scene Mean luminance(Yb%) and Viewing Mean luminance(Yb%) for tone-mapping using Log encoding Q.
|
||||
TP_LOCALLAB_LOGCIE;Log encoding
|
||||
TP_LOCALLAB_LOGCIE_TOOLTIP;Allows you tu use Black Ev, White Ev, White and Black distribution, Scene Mean luminance(Yb%) and Viewing Mean luminance(Yb%) for tone-mapping using 'Log encoding' with Brightness compression.
|
||||
TP_LOCALLAB_LOGCIEQ;Log Encoding Q (with Ciecam)
|
||||
TP_LOCALLAB_LOGCIEQ_TOOLTIP;Activating the checkbox allows you to switch between log encoding based on the 3 RGB channels, and log encoding based solely on Ciecam’s brightness (Q) channel.\nUsing the Q channel instead of the RGB channels helps avoid undesirable edge effects such as hue and saturation shifts.\nHowever, the settings are more difficult to optimise because Q is unbounded and Ciecam alters the data to take into account the surround conditions, simultaneous contrast etc.:\nThe user may have to adjust the following:\n Scene conditions: Mean luminance (Yb), Whites & Blacks distribution, Black Ev, White Ev.\n Source Data Adjustments : Brightness compression, Strength.\n\nNote: when using Log Encoding (Q), be careful not to activate the Disable Ciecam option in the Scene Conditions, Surround menu.
|
||||
|
||||
TP_LOCALLAB_LOGCOLORFL;Colorfulness (M)
|
||||
TP_LOCALLAB_LOGCOLORF_TOOLTIP;Perceived amount of hue in relation to gray.\nIndicator that a stimulus appears more or less colored.
|
||||
TP_LOCALLAB_LOGCONQL;Contrast (Q)
|
||||
@@ -3142,7 +3243,7 @@ TP_LOCALLAB_LOGCONTHRES;Contrast threshold (J & Q)
|
||||
TP_LOCALLAB_LOGCONTL;Contrast (J)
|
||||
TP_LOCALLAB_LOGCONTL_TOOLTIP;Contrast (J) in CIECAM16 takes into account the increase in perceived coloration with luminance.
|
||||
TP_LOCALLAB_LOGCONTQ_TOOLTIP;Contrast (Q) in CIECAM16 takes into account the increase in perceived coloration with brightness.
|
||||
TP_LOCALLAB_LOGCONTTHRES_TOOLTIP;Adjusts the mid-tone contrast range (J & Q).\nPositive values progressively reduce the effect of the Contrast sliders (J & Q). Negative values progressively increase the effect of the Contrast sliders.
|
||||
TP_LOCALLAB_LOGCONTTHRES_TOOLTIP;Adjusts the mid-tone contrast range (J & Q).\nPositive values progressively reduce the effect of the Contrast sliders (J & Q). Negative values progressively increase the effect of the Contrast sliders.
|
||||
TP_LOCALLAB_LOGDETAIL_TOOLTIP;Acts mainly on high frequencies.
|
||||
TP_LOCALLAB_LOGENCOD_TOOLTIP;Tone Mapping with Logarithmic encoding (ACES).\nUseful for underexposed images or images with high dynamic range.\n\nTwo-step process: 1) Dynamic Range calculation 2) Manual adjustment.
|
||||
TP_LOCALLAB_LOGEXP;All tools
|
||||
@@ -3155,6 +3256,7 @@ TP_LOCALLAB_LOGLIGHTQ;Brightness (Q)
|
||||
TP_LOCALLAB_LOGLIGHTQ_TOOLTIP;Perceived amount of light emanating from a stimulus.\nIndicator that a stimulus appears to be more or less bright, clear.
|
||||
TP_LOCALLAB_LOGLIN;Logarithm mode
|
||||
TP_LOCALLAB_LOGPFRA;Relative Exposure Levels
|
||||
TP_LOCALLAB_LOGPFRA2;Log Encoding settings
|
||||
TP_LOCALLAB_LOGREPART;Overall strength
|
||||
TP_LOCALLAB_LOGREPART_TOOLTIP;Allows you to adjust the relative strength of the log-encoded image with respect to the original image.\nDoes not affect the Ciecam component.
|
||||
TP_LOCALLAB_LOGSATURL_TOOLTIP;Saturation (s) in CIECAM16 corresponds to the color of a stimulus in relation to its own brightness.\nActs mainly on medium tones and on the highlights.
|
||||
@@ -3169,7 +3271,7 @@ TP_LOCALLAB_LUMASK;Background color/luma mask
|
||||
TP_LOCALLAB_LUMASK_TOOLTIP;Adjusts the shade of gray or color of the mask background in Show Mask (Mask and modifications).
|
||||
TP_LOCALLAB_LUMAWHITESEST;Lightest
|
||||
TP_LOCALLAB_LUMFRA;L*a*b* standard
|
||||
TP_LOCALLAB_LUMLABEL;Luma levels 0123: Mean=%1 High=%2
|
||||
TP_LOCALLAB_LUMLABEL;Luma levels 0123: Mean=%1 High=%2
|
||||
TP_LOCALLAB_MASFRAME;Mask and Merge
|
||||
TP_LOCALLAB_MASFRAME_TOOLTIP;For all masks.\nTakes into account the ΔE image to avoid modifying the selection area when the following Mask Tools are used: Gamma, Slope, Chroma, Contrast curve, Local contrast (by wavelet level), Blur Mask and Structure Mask (if enabled ).\nDisabled when Inverse mode is used.
|
||||
TP_LOCALLAB_MASK;Curves
|
||||
@@ -3224,7 +3326,7 @@ TP_LOCALLAB_MASKRESRETI_TOOLTIP;Used to modulate the effect of the Retinex (Lumi
|
||||
TP_LOCALLAB_MASKRESTM_TOOLTIP;Used to modulate the effect of the Tone Mapping settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The 'dark' and 'light' areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Tone Mapping settings \n In between these two areas, the full value of the Tone Mapping settings will be applied.
|
||||
TP_LOCALLAB_MASKRESVIB_TOOLTIP;Used to modulate the effect of the Vibrance and Warm Cool settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The 'dark' and 'light' areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Vibrance and Warm Cool settings \n In between these two areas, the full value of the Vibrance and Warm Cool settings will be applied.
|
||||
TP_LOCALLAB_MASKRESWAV_TOOLTIP;Used to modulate the effect of the Local contrast and Wavelet settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The 'dark' and 'light' areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Local contrast and Wavelet settings \n In between these two areas, the full value of the Local contrast and Wavelet settings will be applied.
|
||||
TP_LOCALLAB_MASKUNUSABLE;Mask disabled (Mask & modifications)
|
||||
TP_LOCALLAB_MASKUNUSABLE;Mask disabled (Enable in Mask & modifications)
|
||||
TP_LOCALLAB_MASKUSABLE;Mask enabled (Mask & modifications)
|
||||
TP_LOCALLAB_MASK_TOOLTIP;You can enable multiple masks for a tool by activating another tool and using only the mask (set the tool sliders to 0 ).\n\nYou can also duplicate the spot and place it close to the first spot. The small variations in the spot references allow you to make fine adjustments.
|
||||
TP_LOCALLAB_MEDIAN;Median Low
|
||||
@@ -3260,6 +3362,7 @@ TP_LOCALLAB_MERTHR;Difference
|
||||
TP_LOCALLAB_MERTWE;Exclusion
|
||||
TP_LOCALLAB_MERTWO;Subtract
|
||||
TP_LOCALLAB_METHOD_TOOLTIP;'Enhanced + chroma denoise' significantly increases processing times.\nBut reduce artifacts.
|
||||
TP_LOCALLAB_MIDTCIE;Midtones
|
||||
TP_LOCALLAB_MLABEL;Restored data Min=%1 Max=%2
|
||||
TP_LOCALLAB_MLABEL_TOOLTIP;The values should be close to Min=0 Max=32768 (log mode) but other values are possible.You can adjust 'Clip restored data (gain)' and 'Offset' to normalize.\nRecovers image data without blending.
|
||||
TP_LOCALLAB_MODE_EXPERT;Advanced
|
||||
@@ -3306,11 +3409,19 @@ TP_LOCALLAB_ORRETILAP_TOOLTIP;Modifies ΔE prior to any changes made by 'Scope'.
|
||||
TP_LOCALLAB_ORRETISTREN_TOOLTIP;Acts on the Laplacian threshold, the greater the action, the more the differences in contrast will be reduced.
|
||||
TP_LOCALLAB_PASTELS2;Vibrance
|
||||
TP_LOCALLAB_PDE;Contrast Attenuator - Dynamic Range compression
|
||||
TP_LOCALLAB_PRECAM_TOOLTIP;This 'Source Data Adjustments' modifies: a)the Dynamic Range using Log encoding; b) the tones of the image and primaries(simplified Abstract Profile) and also midtones, just before the Ciecam process. The values are changed:\n-Gamma acts mainly on light tones -Slope acts mainly on dark tones.\nYou can choose any pair of 'gamma and slope' (values >1) and the algorithm will ensure that there is continuity between the linear and parabolic parts of the curve.\n\n\n-Destination primaries: which allows you to change the destination primaries to restore or change image color (saturation), the color balance is 'significantly' preserved when the 'Working Profile' and the 'Destination primaries' are not too different (be careful), 'Working Profiles' are not modified.\nYou can also finely adapt the primaries and the illuminant (white-point).\nMoving a primary away from the white point reduces saturation and vice versa. Pay attention to the gamut.
|
||||
TP_LOCALLAB_PRECAMGAMUT_TOOLTIP;If checked ensures a gamut control just after primary conversion to XYZ matrix.
|
||||
TP_LOCALLAB_PRECAMREFI_TOOLTIP;Allows you to move the white-point in such a way that it approaches the dominant color. This action modifies the purity.
|
||||
TP_LOCALLAB_PRECAMREFIMAIN_TOOLTIP;Allows you to move the white-point in such a way that it approaches the dominant color. This action modifies the purity. In combination with "Shift x" and "Shift y" allows you to carry out moderate Color Toning.
|
||||
TP_LOCALLAB_PDEFRA;Contrast Attenuator ƒ
|
||||
TP_LOCALLAB_PDEFRAME_TOOLTIP;PDE IPOL algorithm adapted for Rawtherapee : gives different results and requires different settings compared to main-menu 'Exposure'.\nMay be useful for under-exposed or high dynamic range images.
|
||||
TP_LOCALLAB_PREVHIDE;Hide additional settings
|
||||
TP_LOCALLAB_PREVIEW;Preview ΔE
|
||||
TP_LOCALLAB_PREVSHOW;Show additional settings
|
||||
TC_LOCALLAB_PRIM_SHIFTX;Shift x
|
||||
TC_LOCALLAB_PRIM_SHIFTY;Shift y
|
||||
TC_LOCALLAB_PRIM_SHIFTX_TOOLTIP;In combination with "Refine colors" allows you:\n 1) for low values adjust the image purity.\n 2) for higher values, carry out moderate Color Toning.\n 3) Be careful not to go outside the CIE xy diagram.
|
||||
TP_LOCALLAB_PRIMILLFRAME;Primaries & Illuminant
|
||||
TP_LOCALLAB_PROXI;ΔE decay
|
||||
TP_LOCALLAB_QUAAGRES;Aggressive
|
||||
TP_LOCALLAB_QUACONSER;Conservative
|
||||
@@ -3355,10 +3466,11 @@ TP_LOCALLAB_RETI_SCALE_TOOLTIP;If Scale=1, Retinex behaves like local contrast w
|
||||
TP_LOCALLAB_RET_TOOLNAME;Dehaze & Retinex
|
||||
TP_LOCALLAB_REWEI;Reweighting iterates
|
||||
TP_LOCALLAB_RGB;RGB Tone Curve
|
||||
TP_LOCALLAB_RGBCURVE_TOOLTIP;In RGB mode you have 4 choices : Standard, Weighted standard, Luminance & Film-like.
|
||||
TP_LOCALLAB_RGBCURVE_TOOLTIP;In RGB mode you have 4 choices : Standard, Weighted standard, Luminance & Film-like.
|
||||
TP_LOCALLAB_ROW_NVIS;Not visible
|
||||
TP_LOCALLAB_ROW_VIS;Visible
|
||||
TP_LOCALLAB_RSTPROTECT_TOOLTIP;Red and skin-tone protection affects the Saturation, Chroma and Colorfulness sliders.
|
||||
TP_LOCALLAB_SATCIE;Saturation control
|
||||
TP_LOCALLAB_SATUR;Saturation
|
||||
TP_LOCALLAB_SATURV;Saturation (s)
|
||||
TP_LOCALLAB_SCALEGR;Scale
|
||||
@@ -3379,7 +3491,7 @@ TP_LOCALLAB_SHADEXCOMP;Shadow compression
|
||||
TP_LOCALLAB_SHADHIGH;Shadows/Highlights & Tone Equalizer
|
||||
TP_LOCALLAB_SHADHMASK_TOOLTIP;Lowers the highlights of the mask in the same way as the shadows/highlights algorithm.
|
||||
TP_LOCALLAB_SHADMASK_TOOLTIP;Lifts the shadows of the mask in the same way as the shadows/highlights algorithm.
|
||||
TP_LOCALLAB_SHADOWHIGHLIGHT_TOOLTIP;Adjust shadows and highlights either with shadows & highlights sliders or with a tone equalizer.\nCan be used instead of, or in conjunction with the Exposure module.\nCan also be used as a graduated filter.
|
||||
TP_LOCALLAB_SHADOWHIGHLIGHT_TOOLTIP;Adjust shadows and highlights either with shadows & highlights sliders or with a tone equalizer.\nCan be used instead of, or in conjunction with the Exposure module.\nCan also be used as a graduated filter.
|
||||
TP_LOCALLAB_SHAMASKCOL;Shadows
|
||||
TP_LOCALLAB_SHAPETYPE;Spot shape
|
||||
TP_LOCALLAB_SHAPE_TOOLTIP;'Ellipse' is the normal mode.\n 'Rectangle' can be used in certain cases, for example to work in full-image mode by placing the delimiters outside the preview area. In this case, set transition = 100.\n\nFuture developments will include polygon shapes and Bezier curves.
|
||||
@@ -3425,17 +3537,41 @@ TP_LOCALLAB_SHOWVI;Mask and modifications
|
||||
TP_LOCALLAB_SHRESFRA;Shadows/Highlights & TRC
|
||||
TP_LOCALLAB_SHTRC_TOOLTIP;Based on 'working profile' (only those provided), modifies the tones of the image by acting on a TRC (Tone Response Curve).\nGamma acts mainly on light tones.\nSlope acts mainly on dark tones.\nIt is recommended that the TRC of both devices (monitor and output profile) be sRGB (default).
|
||||
TP_LOCALLAB_SH_TOOLNAME;Shadows/Highlights & Tone Equalizer
|
||||
TP_LOCALLAB_SIGFRA;Sigmoid Q & Log encoding Q
|
||||
TP_LOCALLAB_SIGCIE;Sigmoid
|
||||
TP_LOCALLAB_SIGFRA;Sigmoid Q
|
||||
TP_LOCALLAB_SIGGAMJCIE;Gamma
|
||||
TP_LOCALLAB_SIGJZFRA;Sigmoid Jz
|
||||
TP_LOCALLAB_SIGMAWAV;Attenuation response
|
||||
TP_LOCALLAB_SIGMOIDBL;Blend
|
||||
TP_LOCALLAB_SIGMOIDLAMBDA;Contrast
|
||||
TP_LOCALLAB_SIGMOIDQJ;Uses Black Ev & White Ev
|
||||
TP_LOCALLAB_SIGMOIDLOGAUTO;Auto threshold
|
||||
TP_LOCALLAB_SIGMOIDQJ;Black Ev & White Ev
|
||||
TP_LOCALLAB_SIGMOIDSENSI;Adaptability
|
||||
TP_LOCALLAB_SIGMOIDTH;Threshold (Gray point)
|
||||
TP_LOCALLAB_SIGMOID_TOOLTIP;Allows you to simulate a Tone-mapping appearance using both the'Ciecam' (or 'Jz') and 'Sigmoid' function.\nThree sliders: a) Contrast acts on the shape of the sigmoid curve and consequently on the strength; b) Threshold (Gray point) distributes the action according to the luminance; c)Blend acts on the final aspect of the image, contrast and luminance.
|
||||
TP_LOCALLAB_SIGMOID_TOOLTIP;Allows you to simulate a Tone-mapping appearance using both the 'Jz' and 'Sigmoid' function.\nThree sliders: a) Contrast acts on the shape of the sigmoid curve and consequently on the strength; b) Threshold (Gray point) distributes the action according to the luminance; c)Blend acts on the final aspect of the image, contrast and luminance.
|
||||
TP_LOCALLAB_SIGMOID16_TOOLTIP;Allows you to simulate a Tone-mapping appearance using both the'Ciecam' and 'Sigmoid Q'.\nSigmoid Q: three sliders: a) Contrast acts on the shape of the sigmoid curve and consequently on the strength; b) Threshold (Gray point) distributes the action according to the luminance; c)Adaptability weights the action of the sigmoid by action on the internal exponential function.
|
||||
TP_LOCALLAB_SIGMOIDLOGEV_TOOLTIP;If the comboxbox selection 'Black Ev and White Ev' is 'Sigmoid and Log encoding' instead of 'Sigmoid only', the two algorithms 'Log encoding' and 'Sigmoid' are used together.
|
||||
TP_LOCALLAB_SIGMOIDNORMCIE;Normalize Luminance
|
||||
TP_LOCALLAB_SIGMOIDNORMCIE_TOOLTIP;Reconstruct luminance so that the mean and variance of the output image take into account those of the original.\nAll the adjustments acting on J or Q are taken into account, including those which are not relative to Sigmoid Q.
|
||||
TP_LOCALLAB_SIGMOIDNORMCIEBLEND_TOOLTIP;Blend acts on the final aspect of the image, contrast and luminance : ratio between original and output image.
|
||||
TP_LOCALLAB_SIGMOIDQJCOMPRCIE_TOOLTIP;When the comboxbox selection'Uses Black Ev and White Ev' is 'Sigmoid and Log encoding Q' or 'Log encoding instead of Sigmoid' checked. This algorithm compress the data above the threshold slider value. This last value stands for brightness (Q) should be a near the possible value 'Compression treshold' (calculate when 'Auto threshold" checked, often > 1).
|
||||
TP_LOCALLAB_SIGSLOPJCIE;Slope
|
||||
TP_LOCALLAB_SIGTRCCIE;Source Data Adjustments
|
||||
TP_LOCALLAB_SIGBLACKSSCIE;Blacks distribution
|
||||
TP_LOCALLAB_SIGWHITESCIE;Whites distribution
|
||||
TP_LOCALLAB_SIGMOIDWHITESCIE_TOOLTIP;Allows you, in Automatic, when the dynamic range of the image is high, to change the distribution of lights in whites and deep blacks.\nCan be used with Log encoding or Sigmoid with Black Ev and White Ev enabled.\n\nThe algorithm does not change the basic data, but acts on the components necessary to calculate the Dynamic range, Black Ev, White Ev and the Gray point.
|
||||
TP_LOCALLAB_SLOMASKCOL;Slope
|
||||
TP_LOCALLAB_SLOMASK_TOOLTIP;Adjusting Gamma and Slope can provide a soft and artifact-free transformation of the mask by progressively modifying 'L' to avoid any discontinuities.
|
||||
TP_LOCALLAB_SLOPESMOOTH;Gray balance (Slope)
|
||||
TP_LOCALLAB_SLOPESMOOTHR;Red balance (Slope)
|
||||
TP_LOCALLAB_SLOPESMOOTHG;Green balance (Slope)
|
||||
TP_LOCALLAB_SLOPESMOOTHB;Blue balance (Slope)
|
||||
TP_LOCALLAB_SLOSH;Slope
|
||||
TP_LOCALLAB_SMOOTHCIE;Highlight attenuation
|
||||
TP_LOCALLAB_SMOOTHCIE_LUM;Luminosity mode
|
||||
TP_LOCALLAB_SMOOTHCIE_SCA;Scale Yb Scene
|
||||
TP_LOCALLAB_SMOOTHCIE_YB;Scale Yb Viewing
|
||||
TP_LOCALLAB_SMOOTHCIE_TOOLTIP;Completes the processing carried out by gamma, slope and midtones by causing a slight lowering of lights. Please note this does not replace Highlight reconstruction.\n\nGamma - Slope - based: choice (Standard and Advanced) allows you to simulate a "Tone mapping" using: a) Scene conditions: Black-Ev, White-Ev, Mean luminance (Yb%); b) Viewing conditions: Mean luminance (Yb%).\nScale Yb Scene is function of White-Ev.
|
||||
TP_LOCALLAB_SOFT;Soft Light & Original Retinex
|
||||
TP_LOCALLAB_SOFTM;Soft Light
|
||||
TP_LOCALLAB_SOFTMETHOD_TOOLTIP;Apply a Soft-light blend (identical to the global adjustment). Carry out dodge and burn using the original Retinex algorithm.
|
||||
@@ -3457,13 +3593,14 @@ TP_LOCALLAB_STRENG;Strength
|
||||
TP_LOCALLAB_STRENGR;Strength
|
||||
TP_LOCALLAB_STRENGRID_TOOLTIP;You can adjust the desired effect with 'strength', but you can also use the 'scope' function which allows you to delimit the action (e.g. to isolate a particular color).
|
||||
TP_LOCALLAB_STRENGTH;Noise
|
||||
TP_LOCALLAB_STRENGTHCIELOG;Strength
|
||||
TP_LOCALLAB_STRGRID;Strength
|
||||
TP_LOCALLAB_STRUC;Structure
|
||||
TP_LOCALLAB_STRUCCOL;Spot structure
|
||||
TP_LOCALLAB_STRUCCOL1;Spot structure
|
||||
TP_LOCALLAB_STRUCT_TOOLTIP;Uses the Sobel algorithm to take into account structure for shape detection.\nActivate 'Mask and modifications' > 'Show spot structure' (Advanced mode) to see a preview of the mask (without modifications).\n\nCan be used in conjunction with the Structure Mask, Blur Mask and 'Local contrast' (by wavelet level) to improve edge detection.\n\nEffects of adjustments using Lightness, Contrast, Chrominance, Exposure or other non-mask-related tools visible using either 'Show modified image' or 'Show modified areas with mask'.
|
||||
TP_LOCALLAB_STRUMASKCOL;Structure mask strength
|
||||
TP_LOCALLAB_STRUMASK_TOOLTIP;Structure mask (slider) with the checkbox 'Structure mask as tool' unchecked: In this case a mask showing the structure will be generated even if none of the 3 curves is activated. Structure masks are available for mask (Blur and denoise') and mask(Color & Light).
|
||||
TP_LOCALLAB_STRUMASK_TOOLTIP;Structure mask (slider) with the checkbox 'Structure mask as tool' unchecked: In this case a mask showing the structure will be generated even if none of the 3 curves is activated. Structure masks are available for mask (Blur and denoise') and mask(Color & Light).
|
||||
TP_LOCALLAB_STRUSTRMASK_TOOLTIP;Moderate use of this slider is recommended!
|
||||
TP_LOCALLAB_STYPE;Shape method
|
||||
TP_LOCALLAB_STYPE_TOOLTIP;You can choose between:\nSymmetrical - left handle linked to right, top handle linked to bottom.\nIndependent - all handles are independent.
|
||||
@@ -3495,11 +3632,12 @@ TP_LOCALLAB_TRANSITGRAD;Transition differentiation XY
|
||||
TP_LOCALLAB_TRANSITGRAD_TOOLTIP;Allows you to vary the y-axis transition.
|
||||
TP_LOCALLAB_TRANSITVALUE;Transition value
|
||||
TP_LOCALLAB_TRANSITWEAK;Transition decay (linear-log)
|
||||
TP_LOCALLAB_TRANSITWEAK_TOOLTIP;Adjust transition decay function: 1 linear , 2 parabolic, 3 cubic up to ^25.\nCan be used in conjunction with very low transition values to reduce defects (CBDL, Wavelets, Color & Light).
|
||||
TP_LOCALLAB_TRANSITWEAK_TOOLTIP;Adjust transition decay function: 1 linear , 2 parabolic, 3 cubic up to ^25.\nCan be used in conjunction with very low transition values to reduce defects (CBDL, Wavelets, Color & Light).
|
||||
TP_LOCALLAB_TRANSIT_TOOLTIP;Adjust smoothness of transition between affected and unaffected areas as a percentage of the 'radius'.
|
||||
TP_LOCALLAB_TRANSMISSIONGAIN;Transmission gain
|
||||
TP_LOCALLAB_TRANSMISSIONMAP;Transmission map
|
||||
TP_LOCALLAB_TRANSMISSION_TOOLTIP;Transmission according to transmission.\nAbscissa: transmission from negative values (min), mean, and positive values (max).\nOrdinate: amplification or reduction.\nYou can adjust this curve to change the Transmission and reduce artifacts.
|
||||
TP_LOCALLAB_TRCFRAME;Tone Response Curve & Midtones
|
||||
TP_LOCALLAB_USEMASK;Laplacian
|
||||
TP_LOCALLAB_VART;Variance (contrast)
|
||||
TP_LOCALLAB_VIBRANCE;Vibrance & Warm/Cool
|
||||
@@ -4153,7 +4291,7 @@ TP_WAVELET_WAVOFFSET;Offset
|
||||
TP_WBALANCE_AUTO;Auto
|
||||
TP_WBALANCE_AUTOITCGREEN;Temperature correlation
|
||||
TP_WBALANCE_AUTOOLD;RGB grey
|
||||
TP_WBALANCE_AUTO_HEADER;Automatic & Refinement
|
||||
TP_WBALANCE_AUTO_HEADER;Automatic & Refinement
|
||||
TP_WBALANCE_CAMERA;Camera
|
||||
TP_WBALANCE_CLOUDY;Cloudy
|
||||
TP_WBALANCE_CUSTOM;Custom
|
||||
@@ -4229,7 +4367,7 @@ TP_WBALANCE_METHOD;Method
|
||||
TP_WBALANCE_MULLABEL;Multipliers: r=%1 g=%2 b=%3
|
||||
TP_WBALANCE_MULLABEL_TOOLTIP;Values given for information purposes. You cannot change them.
|
||||
TP_WBALANCE_OBSERVER10;Observer 10° instead of Observer 2°
|
||||
TP_WBALANCE_OBSERVER10_TOOLTIP;The color management in Rawtherapee (White balance, channel multipliers, highlight recovery,...) uses the spectral data of the illuminants and colors. Observer is an important parameter of this management which takes into account the angle of perception of the eye. In 1931 it was fixed at 2° (privileges the use of the cones). In 1964 it was fixed at 10° (privileges the use of the cones, but partially takes into account the rods).\nTo avoid a (rare) drift of the colors due to the choice Observer 10° - probably due to the conversion matrix - Observer 2° must be selected.\nIn a majority of cases Observer 10° (default) will be a more relevant choice.
|
||||
TP_WBALANCE_OBSERVER10_TOOLTIP;The color management in Rawtherapee (White balance, channel multipliers, highlight recovery,...) uses the spectral data of the illuminants and colors. Observer is an important parameter of this management which takes into account the angle of perception of the eye. In 1931 it was fixed at 2° (privileges the use of the cones). In 1964 it was fixed at 10° (privileges the use of the cones, but partially takes into account the rods).\nIn the rare case of a color drift with "Observer 2°" (probably due to the conversion matrix) “Observer 10°” must be selected.
|
||||
TP_WBALANCE_PATCHLABEL;Read colors:%1 Patch: Chroma:%2 Size=%3
|
||||
TP_WBALANCE_PATCHLABEL_TOOLTIP;Display number of read colors (max=237).\nDisplay calculated Patch Chroma.\nAWB temperature bias, lets try to reduce this value, a minimum may seem to optimize the algorithm.\n\nPatch size matching chroma optimization.
|
||||
TP_WBALANCE_PATCHLEVELLABEL;Patch: ΔE=%1 - datas x 9 Min:%2 Max=%3
|
||||
|
||||
Reference in New Issue
Block a user