merge with dev
This commit is contained in:
Desmis
commit
3ebbbdf139
BIN
rtdata/dcpprofiles/NIKON D800E.dcp
Normal file
BIN
rtdata/dcpprofiles/NIKON D800E.dcp
Normal file
Binary file not shown.
Binary file not shown.
@ -20,6 +20,8 @@
|
||||
"MINOLTA DYNAX 5D": ["Minolta Maxxum 5D", "Minolta Alpha 5D", "Minolta Alpha Sweet"],
|
||||
"MINOLTA DYNAX 7D": ["Minolta Maxxum 7D", "Minolta Alpha 7D"],
|
||||
|
||||
"NIKON D800E": ["NIKON D800"],
|
||||
|
||||
"Panasonic DC-FZ82": ["Panasonic DMC-FZ80", "Panasonic DMC-FZ85"],
|
||||
"Panasonic DC-TZ91": ["Panasonic DC-TZ90", "Panasonic DC-TZ92", "Panasonic DC-TZ93", "Panasonic DC-ZS70"],
|
||||
"Panasonic DMC-G8": ["Panasonic DMC-G80", "Panasonic DMC-G81", "Panasonic DMC-G85"],
|
||||
|
||||
@ -967,6 +967,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
|
||||
!DYNPROFILEEDITOR_PROFILE;Processing Profile
|
||||
!EDIT_OBJECT_TOOLTIP;Displays a widget on the preview window which lets you adjust this tool.
|
||||
!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
|
||||
@ -1317,7 +1318,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1796,7 +1797,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
|
||||
!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
|
||||
!TP_EPD_GAMMA;Gamma
|
||||
!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
|
||||
!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
|
||||
@ -1909,53 +1910,34 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2128,7 +2110,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -1035,6 +1035,7 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: <b>-</b>
|
||||
!CURVEEDITOR_EDITPOINT_HINT;Enable edition of node in/out values.\n\nRight-click on a node to select it.\nRight-click on empty space to de-select the node.
|
||||
!EDIT_OBJECT_TOOLTIP;Displays a widget on the preview window which lets you adjust this tool.
|
||||
!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
!EXPORT_BYPASS_RAW_DCB_ENHANCE;Bypass [raw] DCB Enhancement Steps
|
||||
@ -1427,7 +1428,7 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: <b>-</b>
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1747,7 +1748,7 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: <b>-</b>
|
||||
!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
|
||||
!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
|
||||
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
|
||||
!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
|
||||
@ -1887,53 +1888,34 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: <b>-</b>
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2123,7 +2105,7 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: <b>-</b>
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -466,6 +466,7 @@ TP_WBALANCE_TEMPERATURE;色溫
|
||||
!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
|
||||
!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
|
||||
!EXIFFILTER_FILETYPE;File type
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFFILTER_METADATAFILTER;Enable metadata filters
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
@ -979,7 +980,7 @@ TP_WBALANCE_TEMPERATURE;色溫
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1623,7 +1624,7 @@ TP_WBALANCE_TEMPERATURE;色溫
|
||||
!TP_EPD_STRENGTH;Strength
|
||||
!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
|
||||
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
|
||||
!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
|
||||
!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
|
||||
@ -1835,53 +1836,34 @@ TP_WBALANCE_TEMPERATURE;色溫
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2093,7 +2075,7 @@ TP_WBALANCE_TEMPERATURE;色溫
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -40,7 +40,7 @@
|
||||
#39 2017-07-21 updated by mkyral
|
||||
#40 2017-12-13 updated by mkyral
|
||||
#41 2018-03-03 updated by mkyral
|
||||
|
||||
#42 2018-04-28 updated by mkyral
|
||||
ABOUT_TAB_BUILD;Verze
|
||||
ABOUT_TAB_CREDITS;Zásluhy
|
||||
ABOUT_TAB_LICENSE;Licence
|
||||
@ -95,6 +95,7 @@ EXIFFILTER_CAMERA;Fotoaparát
|
||||
EXIFFILTER_EXPOSURECOMPENSATION;Kompenzace expozice (EV)
|
||||
EXIFFILTER_FILETYPE;Typ souboru
|
||||
EXIFFILTER_FOCALLEN;Ohnisková vzdálenost
|
||||
EXIFFILTER_IMAGETYPE;Typ obrázku
|
||||
EXIFFILTER_ISO;ISO
|
||||
EXIFFILTER_LENS;Objektiv
|
||||
EXIFFILTER_METADATAFILTER;Povolit filtr metadat
|
||||
@ -572,8 +573,8 @@ HISTORY_MSG_284;Barevné tónování - Aut. ochrana nasycení
|
||||
HISTORY_MSG_285;Redukce šumu - Medián - Metoda
|
||||
HISTORY_MSG_286;Redukce šumu - Medián - Typ
|
||||
HISTORY_MSG_287;Redukce šumu - Medián - Průchody
|
||||
HISTORY_MSG_288;Flat Field - kontrola oříznutí
|
||||
HISTORY_MSG_289;Flat Field - kontrola oříznutí - Auto
|
||||
HISTORY_MSG_288;Flat-Field - kontrola oříznutí
|
||||
HISTORY_MSG_289;Flat-Field - kontrola oříznutí - Auto
|
||||
HISTORY_MSG_290;Úroveň černé - Červená
|
||||
HISTORY_MSG_291;Úroveň černé - Zelená 1
|
||||
HISTORY_MSG_292;Úroveň černé - Modrá
|
||||
@ -762,14 +763,17 @@ HISTORY_MSG_490;HDR TM - Míra
|
||||
HISTORY_MSG_491;Vyvážení bílé
|
||||
HISTORY_MSG_492;RGB křivky
|
||||
HISTORY_MSG_493;L*a*b* úpravy
|
||||
HISTORY_MSG_CLAMPOOG;Oříznutí barvy mimo gamut
|
||||
HISTORY_MSG_COLORTONING_LABGRID_VALUE;Barevné tónování - Korekce barev
|
||||
HISTORY_MSG_HISTMATCHING;Automaticky nalezená Tónová křivka
|
||||
HISTORY_MSG_HISTMATCHING;Automaticky přizpůsobená Tónová křivka
|
||||
HISTORY_MSG_LOCALCONTRAST_AMOUNT;Místní kontrast - Míra
|
||||
HISTORY_MSG_LOCALCONTRAST_DARKNESS;Místní kontrast - Tmavé
|
||||
HISTORY_MSG_LOCALCONTRAST_ENABLED;Místní kontrast
|
||||
HISTORY_MSG_LOCALCONTRAST_LIGHTNESS;Místní kontrast - Světlé
|
||||
HISTORY_MSG_LOCALCONTRAST_RADIUS;Místní kontrast - Poloměr
|
||||
HISTORY_MSG_METADATA_MODE;Režim kopírování metadat
|
||||
HISTORY_MSG_PREPROCESS_LINEDENOISE_DIRECTION;Směr filtru linkového rušení
|
||||
HISTORY_MSG_PREPROCESS_PDAFLINESFILTER;Filtr PDAF linek
|
||||
HISTORY_MSG_TM_FATTAL_ANCHOR;HDR TM - Kotva
|
||||
HISTORY_NEWSNAPSHOT;Přidat
|
||||
HISTORY_NEWSNAPSHOT_TOOLTIP;Zkratka: <b>Alt-s</b>
|
||||
@ -1008,10 +1012,6 @@ PREFERENCES_CACHECLEARTHUMBS;Vymazat náhledy
|
||||
PREFERENCES_CACHEMAXENTRIES;Maximální počet záznamů v mezipaměti
|
||||
PREFERENCES_CACHEOPTS;Vlastnosti mezipaměti
|
||||
PREFERENCES_CACHETHUMBHEIGHT;Maximální výška náhledu
|
||||
PREFERENCES_CIEART;CIECAM02 optimalizace
|
||||
PREFERENCES_CIEART_FRAME;CIECAM02 - Specifická nastavení
|
||||
PREFERENCES_CIEART_LABEL;Použít jednoduchou přesnost místo dvojnásobné
|
||||
PREFERENCES_CIEART_TOOLTIP;Pokud je povoleno, budou pro CIECAM02 výpočty použita reálná čísla s jednoduchou přesností místo čísel s dvojnásobnou přesností. Tím se dosáhne mírného zrychlení výpočtů za cenu nepatrné ztráty kvality.
|
||||
PREFERENCES_CLIPPINGIND;Indikace oříznutí
|
||||
PREFERENCES_CLUTSCACHE;Mezipaměť HaldCLUT
|
||||
PREFERENCES_CLUTSCACHE_LABEL;Maximální počet přednačtených CLUTů
|
||||
@ -1194,6 +1194,10 @@ PREFERENCES_TAB_IMPROC;Zpracování obrázku
|
||||
PREFERENCES_TAB_PERFORMANCE;Výkon a kvalita
|
||||
PREFERENCES_TAB_SOUND;Zvuky
|
||||
PREFERENCES_THEME;Vzhled
|
||||
PREFERENCES_THUMBNAIL_INSPECTOR_JPEG;Vložený JPEG náhled
|
||||
PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Obrázek k zobrazení
|
||||
PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutrální vykreslení raw
|
||||
PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Vložený JPEG náhled pokud je v plné velikosti, jinak neutrální raw
|
||||
PREFERENCES_TIMAX;Vysoký
|
||||
PREFERENCES_TINB;Počet dlaždic
|
||||
PREFERENCES_TISTD;Běžný
|
||||
@ -1585,6 +1589,7 @@ TP_EXPOSURE_AUTOLEVELS;Automatické úrovně
|
||||
TP_EXPOSURE_AUTOLEVELS_TIP;Přepne provedení Automatické úrovně na automatickou sadu hodnot parametrů založených na analýze obrázku\nPokud to je nezbytné, povolí rekonstrukci světel.
|
||||
TP_EXPOSURE_BLACKLEVEL;Černá
|
||||
TP_EXPOSURE_BRIGHTNESS;Světlost
|
||||
TP_EXPOSURE_CLAMPOOG;Oříznout barvy mimo gamut
|
||||
TP_EXPOSURE_CLIP;Oříznutí %
|
||||
TP_EXPOSURE_CLIP_TIP;Podíl klipujících bodů v automatických operacích úrovní.
|
||||
TP_EXPOSURE_COMPRHIGHLIGHTS;Komprese světel
|
||||
@ -1595,7 +1600,7 @@ TP_EXPOSURE_CURVEEDITOR1;Tónová křivka 1
|
||||
TP_EXPOSURE_CURVEEDITOR2;Tónová křivka 2
|
||||
TP_EXPOSURE_CURVEEDITOR2_TOOLTIP;Podívejte se prosím na článek "Exposure > Tone Curves" na RawPedii, kde se můžete naučit. jak pomocí dvou tónových křivek dosáhnout ten nejlepší výsledek.
|
||||
TP_EXPOSURE_EXPCOMP;Kompenzace expozice
|
||||
TP_EXPOSURE_HISTMATCHING;Automaticky nalezená Tónová křivka
|
||||
TP_EXPOSURE_HISTMATCHING;Automaticky přizpůsobená Tónová křivka
|
||||
TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatické nastavení posuvníků a křivek (kromě kompenzace expozice) tak, aby bylo dosaženo co největší shody s vloženým Jpeg náhledem.
|
||||
TP_EXPOSURE_LABEL;Expozice
|
||||
TP_EXPOSURE_SATURATION;Nasycení
|
||||
@ -1763,7 +1768,14 @@ TP_PREPROCESS_HOTPIXFILT;Filtr vypálených pixelů
|
||||
TP_PREPROCESS_HOTPIXFILT_TOOLTIP;Zkusí potlačit vypálené pixely.
|
||||
TP_PREPROCESS_LABEL;Předzpracování
|
||||
TP_PREPROCESS_LINEDENOISE;Filtrovat linkové rušení
|
||||
TP_PREPROCESS_LINEDENOISE_DIRECTION;Směr
|
||||
TP_PREPROCESS_LINEDENOISE_DIRECTION_BOTH;Oba
|
||||
TP_PREPROCESS_LINEDENOISE_DIRECTION_HORIZONTAL;Vodorovně
|
||||
TP_PREPROCESS_LINEDENOISE_DIRECTION_PDAF_LINES;Vodorovně pouze PDAF řádky
|
||||
TP_PREPROCESS_LINEDENOISE_DIRECTION_VERTICAL;Svisle
|
||||
TP_PREPROCESS_NO_FOUND;Nic nenalezeno
|
||||
TP_PREPROCESS_PDAFLINESFILTER;Filtr PDAF linek
|
||||
TP_PREPROCESS_PDAFLINESFILTER_TOOLTIP;Pokusí se potlačit proužkový šum způsobený PDAF pixely na sensoru, vznikající na některých bezzrcadlovkách Sony v některých scénách se záblesky v protisvětle.
|
||||
TP_PRSHARPENING_LABEL;Doostření po změně velikosti
|
||||
TP_PRSHARPENING_TOOLTIP;Obrázek po zmenšení doostří. Funguje pouze pokud je použita "Lanczos" metoda zmenšení. Náhled výsledku není v tomto nástroji možný. Podívejte se do RawPedie pro návod k použití.
|
||||
TP_RAWCACORR_AUTO;Automatická korekce
|
||||
@ -1809,53 +1821,34 @@ TP_RAW_LMMSE_TOOLTIP;Přidá gamu (krok 1) - přidá mediány (kroky 2, až 4) a
|
||||
TP_RAW_MONO;Mono
|
||||
TP_RAW_NONE;Žádná (zobrazí strukturu senzoru)
|
||||
TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
TP_RAW_PIXELSHIFTADAPTIVE;Přizpůsobivá detekce
|
||||
TP_RAW_PIXELSHIFTBLUR;Maska pohybové neostrosti
|
||||
TP_RAW_PIXELSHIFTEPERISO;Přizpůsobení ISO
|
||||
TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;Výchozí hodnota 0 by měla dostačovat pro základní hodnoty ISO.\nDetekci pohybu na vyšších hodnotách ISO vylepšíte navýšením této hodnoty.\nZvyšujte po malých krocích a sledujte přitom masku pohybu.
|
||||
TP_RAW_PIXELSHIFTEPERISO;Citlivost
|
||||
TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;Výchozí hodnota 0 by měla dostatečně fungovat pro základní hodnoty ISO.\nDetekci pohybu na vyšších hodnotách ISO vylepšíte navýšením této hodnoty.\nZvyšujte po malých krocích a sledujte přitom masku pohybu.\nPro podexponované nebo obrázky s vysokým ISO zvyšte citlivost.
|
||||
TP_RAW_PIXELSHIFTEQUALBRIGHT;Vyrovnat jas snímků
|
||||
TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Korekce po kanálech
|
||||
TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Zapnuto: Nezávislá korekce jednotlivých RGB kanálů.\nVypnuto: Použije se stejná hodnota pro všechny kanály.
|
||||
TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Vyrovná jas ostatních snímků podle jasu vybraného snímku.\nPokud jsou ve snímku přeexponované oblasti, vyberte jasnější snímek abyste zamezili výskytu purpurové barvy v přeexponovaných oblastech nebo povolte korekci pohybu.
|
||||
TP_RAW_PIXELSHIFTEXP0;Testovací
|
||||
TP_RAW_PIXELSHIFTGREEN;Kontrolovat zelený kanál na pohyb
|
||||
TP_RAW_PIXELSHIFTHOLEFILL;Vyplnit díry v masce pohybu
|
||||
TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Vyplnit díry v masce pohybu
|
||||
TP_RAW_PIXELSHIFTLMMSE;Použít LMMSE pro části s pohybem
|
||||
TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Pro oblasti s pohybem použít LMMSE namísto AMaZE.\nUžitečné pro fotografie s vysokým ISO.
|
||||
TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 nový práh
|
||||
TP_RAW_PIXELSHIFTMEDIAN;Použít medián pro části s pohybem
|
||||
TP_RAW_PIXELSHIFTMEDIAN3;Vyjmout vybraný snímek z mediánu
|
||||
TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Vyjme vybraný snímek z mediánu.\nUžitečné, pokud se pohybující se objekty překrývají jen ve druhém a třetím.
|
||||
TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Pro oblasti s pohybem použijte medián všech snímků namísto vybraného.\nOdstraní objekty, které jsou na všech snímcích na různých místech.\nVytvoří efekt pohybu pro pomalu se pohybující (překrývající se) objekty.
|
||||
TP_RAW_PIXELSHIFTMM_AUTO;Automatická
|
||||
TP_RAW_PIXELSHIFTMM_CUSTOM;Vlastní
|
||||
TP_RAW_PIXELSHIFTMM_OFF;Vypnuto
|
||||
TP_RAW_PIXELSHIFTMOTION;Úroveň kontroly pohybu (zastaralé)
|
||||
TP_RAW_PIXELSHIFTMOTIONCORRECTION;Míra korekce pohybu v zelené
|
||||
TP_RAW_PIXELSHIFTMOTIONMETHOD;Korekce pohybu
|
||||
TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 znamená bez detekce pohybu.\n1 - 99 znamená, že pohybu bude detekován dle této hodnoty. Pro zvýšení míry detekce použijte vyšší hodnotu.\n100 znamená, že bude použito AMaZE demozajkování snímku.
|
||||
TP_RAW_PIXELSHIFTNONGREENAMAZE;Kontrolovat červené/modré AMaZE
|
||||
TP_RAW_PIXELSHIFTNONGREENCROSS;Kontrolovat pohyb v červeném a modrém kanálu
|
||||
TP_RAW_PIXELSHIFTNONGREENCROSS2;Kontrolovat zelené AMaZE
|
||||
TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Kontrolovat červenou/modrou vodorovně
|
||||
TP_RAW_PIXELSHIFTNONGREENVERTICAL;Kontrolovat červenou/modrou svisle
|
||||
TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
TP_RAW_PIXELSHIFTONEGREEN;Použít jednu zelenou místo průměru
|
||||
TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;V oblastech bez pohybu použije jednu zelenou namísto zprůměrování obou zelených.
|
||||
TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Váha červené a modré
|
||||
TP_RAW_PIXELSHIFTSHOWMOTION;Ukázat masku pohybu
|
||||
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Ukázat pouze masku pohybu
|
||||
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Ukázat masku pohybu bez obrázku.
|
||||
TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Překryje obrázek maskou, která ukazuje oblasti s pohybem.
|
||||
TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Překryje obrázek zelenou maskou, která ukazuje oblasti s pohybem.
|
||||
TP_RAW_PIXELSHIFTSIGMA;Poloměr rozostření
|
||||
TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;Výchozí poloměr 1,0 většinou velmi dobře funguje pro základní ISO.\nU snímků s vysokým ISO poloměr zvětšete. Hodnota 5,0 je dobrým výchozím bodem.\nBěhem změny hodnoty sledujte masku pohybu.
|
||||
TP_RAW_PIXELSHIFTSMOOTH;Hladké přechody
|
||||
TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Vyhlazení přechodů mezi oblastmi s pohybem a bez pohybu.\nNastavte na 0 pro vypnutí vyhlazování přechodů.\nNastavte na 1 pro získání AMaZE/LMMSE výsledku pro vybraný snímek (závisí na tom, zda je vybrána volba "Použít LMMSE") nebo mediánu všech čtyř snímků (pokud je vybrána volba "Použít medián").
|
||||
TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev faktor modrý
|
||||
TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev faktor zelený
|
||||
TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev faktor červený
|
||||
TP_RAW_RCD;RCD
|
||||
TP_RAW_SENSOR_BAYER_LABEL;Snímač s Bayerovou maskou
|
||||
TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;Tří průchodová dává lepší výsledky (doporučeno pro fotky s nízkým ISO).\nJednoprůchodová je téměř k nerozeznání od tří průchodové pro vysoké ISO a je rychlejší.
|
||||
@ -2243,23 +2236,3 @@ ZOOMPANEL_ZOOMFITCROPSCREEN;Přizpůsobit ořez obrazovce\nZkratka: <b>f</b>
|
||||
ZOOMPANEL_ZOOMFITSCREEN;Přizpůsobit celý obrázek obrazovce\nZkratka: <b>Alt</b>-<b>f</b>
|
||||
ZOOMPANEL_ZOOMIN;Přiblížit\nZkratka: <b>+</b>
|
||||
ZOOMPANEL_ZOOMOUT;Oddálit\nZkratka: <b>-</b>
|
||||
|
||||
!!!!!!!!!!!!!!!!!!!!!!!!!
|
||||
! Untranslated keys follow; remove the ! prefix after an entry is translated.
|
||||
!!!!!!!!!!!!!!!!!!!!!!!!!
|
||||
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_PREPROCESS_LINEDENOISE_DIRECTION;Line noise filter direction
|
||||
!HISTORY_MSG_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
|
||||
!PREFERENCES_THUMBNAIL_INSPECTOR_JPEG;Embedded JPEG preview
|
||||
!PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
|
||||
!PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
|
||||
!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_PREPROCESS_LINEDENOISE_DIRECTION;Direction
|
||||
!TP_PREPROCESS_LINEDENOISE_DIRECTION_BOTH;Both
|
||||
!TP_PREPROCESS_LINEDENOISE_DIRECTION_HORIZONTAL;Horizontal
|
||||
!TP_PREPROCESS_LINEDENOISE_DIRECTION_PDAF_LINES;Horizontal only on PDAF rows
|
||||
!TP_PREPROCESS_LINEDENOISE_DIRECTION_VERTICAL;Vertical
|
||||
!TP_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
|
||||
!TP_PREPROCESS_PDAFLINESFILTER_TOOLTIP;Tries to suppress stripe noise caused by on-sensor PDAF pixels, occurring with some Sony mirrorless cameras on some backlit scenes with visible flare.
|
||||
|
||||
@ -459,6 +459,7 @@ TP_WBALANCE_TEMPERATURE;Temperatur
|
||||
!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
|
||||
!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
|
||||
!EXIFFILTER_FILETYPE;File type
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFFILTER_METADATAFILTER;Enable metadata filters
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
@ -975,7 +976,7 @@ TP_WBALANCE_TEMPERATURE;Temperatur
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1621,7 +1622,7 @@ TP_WBALANCE_TEMPERATURE;Temperatur
|
||||
!TP_EPD_STRENGTH;Strength
|
||||
!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
|
||||
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
|
||||
!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
|
||||
!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
|
||||
@ -1831,53 +1832,34 @@ TP_WBALANCE_TEMPERATURE;Temperatur
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2092,7 +2074,7 @@ TP_WBALANCE_TEMPERATURE;Temperatur
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -54,6 +54,7 @@
|
||||
#53 26.02.2018 Erweiterung (TooWaBoo) RT 5.3
|
||||
#54 30.03.2018 Erweiterung (TooWaBoo) RT 5.4
|
||||
#55 06.04.2018 Erweiterung (TooWaBoo) RT 5.4
|
||||
#56 27.04.2018 Erweiterung (TooWaBoo) RT 5.4
|
||||
|
||||
ABOUT_TAB_BUILD;Version
|
||||
ABOUT_TAB_CREDITS;Danksagungen
|
||||
@ -776,7 +777,7 @@ HISTORY_MSG_490;(HDR-Dynamikkompression)\nIntensität
|
||||
HISTORY_MSG_491;(Weißabgleich)
|
||||
HISTORY_MSG_492;(RGB-Kurven)
|
||||
HISTORY_MSG_493;(L*a*b*)
|
||||
HISTORY_MSG_CLAMPOOG;(Belichtung) - Farben\nauf den Farbraum\nbeschränken
|
||||
HISTORY_MSG_CLAMPOOG;(Belichtung) - Farben\nauf Farbraum beschränken
|
||||
HISTORY_MSG_COLORTONING_LABGRID_VALUE;(Farbanpassungen)\nL*a*b* - Farbkorrektur
|
||||
HISTORY_MSG_HISTMATCHING;(Belichtung)\nAuto-Tonwertkurve
|
||||
HISTORY_MSG_LOCALCONTRAST_AMOUNT;(Lokaler Kontrast)\nIntensität
|
||||
@ -1611,7 +1612,7 @@ TP_EXPOSURE_AUTOLEVELS;Auto
|
||||
TP_EXPOSURE_AUTOLEVELS_TIP;Automatische Belichtungseinstellung\nbasierend auf Bildanalyse.
|
||||
TP_EXPOSURE_BLACKLEVEL;Schwarzwert
|
||||
TP_EXPOSURE_BRIGHTNESS;Helligkeit
|
||||
TP_EXPOSURE_CLAMPOOG;Farben auf den Farbraum beschränken
|
||||
TP_EXPOSURE_CLAMPOOG;Farben auf Farbraum beschränken
|
||||
TP_EXPOSURE_CLIP;Clip %:
|
||||
TP_EXPOSURE_CLIP_TIP;Anteil der Pixel, die sich bei automatischer\nBelichtungseinstellung im Bereich der\nSpitzlichter und Schatten befinden sollen.
|
||||
TP_EXPOSURE_COMPRHIGHLIGHTS;Lichterkompression
|
||||
@ -1845,8 +1846,6 @@ TP_RAW_NONE;Keine
|
||||
TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
TP_RAW_PIXELSHIFTADAPTIVE;Adaptive Erkennung
|
||||
TP_RAW_PIXELSHIFTBLUR;Unschärfebewegungsmaske
|
||||
TP_RAW_PIXELSHIFTEPERISO;ISO-Anpassung
|
||||
TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;Der Standardwert (0.0) empfiehlt sich für die Basis-ISO.\nErhöhen Sie den Wert, um die Bewegungserkennung für höhere ISO-Werte zu verbessern.\nErhöhen Sie den Wert nur in kleinen Schritten und achten Sie dabei auf die Bewegungsmaske.
|
||||
TP_RAW_PIXELSHIFTEQUALBRIGHT;Frame-Helligkeit angleichen
|
||||
TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Ausgleich pro Kanal
|
||||
TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;EIN: Individueller Ausgleich der RGB-Kanäle.\nAUS: Identischer Ausgleichsfaktor für alle Kanäle.
|
||||
@ -1882,7 +1881,6 @@ TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
TP_RAW_PIXELSHIFTSHOWMOTION;Bewegungsmaske anzeigen
|
||||
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Nur Maske anzeigen
|
||||
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Zeigt die Bewegungsmaske ohne Bild.
|
||||
TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Überlagert das Bild mit einer Maske um die\nBereiche mit Bewegung hervorzuheben.
|
||||
TP_RAW_PIXELSHIFTSIGMA;Unschärferadius
|
||||
TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;Der Standard-Radius von 1,0 passt in der Regel für die Basis-ISO.\nErhöhen Sie den Wert für High-ISO-Aufnahmen, 5,0 ist ein guter\nAusgangspunkt für High-ISO-Aufnahmen. Achten Sie auf die\nBewegungsmaske, während Sie den Wert ändern.
|
||||
TP_RAW_PIXELSHIFTSMOOTH;Weicher Übergang
|
||||
@ -2278,3 +2276,11 @@ ZOOMPANEL_ZOOMFITSCREEN;An Bildschirm anpassen\nTaste: <b>Alt</b> + <b>f</b>
|
||||
ZOOMPANEL_ZOOMIN;Hineinzoomen\nTaste: <b>+</b>
|
||||
ZOOMPANEL_ZOOMOUT;Herauszoomen\nTaste: <b>-</b>
|
||||
|
||||
!!!!!!!!!!!!!!!!!!!!!!!!!
|
||||
! Untranslated keys follow; remove the ! prefix after an entry is translated.
|
||||
!!!!!!!!!!!!!!!!!!!!!!!!!
|
||||
|
||||
EXIFFILTER_IMAGETYPE;Bildtyp
|
||||
TP_RAW_PIXELSHIFTEPERISO;Empfindlichkeit
|
||||
TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;Der Standardwert 0 wird für die Basis-ISO empfohlen.\nHöhere Werte erhöhen die Empfindlichkeit der Bewegungserkennung.\nVerändern Sie den Wert in kleinen Schritten und beobachten Sie die\nBewegungsmaske. Erhöhen Sie die Empfindlichkeit für unterbelichtete\noder High-ISO-Bilder.
|
||||
TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Überlagert das Bild mit einer grünen Maske,\num die Bewegungsbereiche hervorzuheben.
|
||||
|
||||
@ -22,6 +22,7 @@ HISTORY_MSG_258;CT - Colour curve
|
||||
HISTORY_MSG_322;W - Gamut - Avoid colour shift
|
||||
HISTORY_MSG_385;W - Residual - Colour Balance
|
||||
HISTORY_MSG_419;Retinex - Colour space
|
||||
HISTORY_MSG_CLAMPOOG;Out-of-gamut colour clipping
|
||||
HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Colour correction
|
||||
MAIN_TAB_COLOR;Colour
|
||||
MAIN_TOOLTIP_BACKCOLOR0;Background colour of the preview: <b>Theme-based</b>\nShortcut: <b>9</b>
|
||||
@ -81,6 +82,7 @@ TP_DIRPYREQUALIZER_ALGO;Skin Colour Range
|
||||
TP_DIRPYREQUALIZER_ALGO_TOOLTIP;Fine: closer to the colours of the skin, minimizing the action on other colours\nLarge: avoid more artifacts.
|
||||
TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colours (hue, chroma, luma) and the rest of the image.
|
||||
TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colourfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
|
||||
TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Clip control avoids clipped highlights caused by applying the flat field. If there are already clipped highlights before applying the flat field, clip control can lead to colour cast.
|
||||
TP_GRADIENT_CENTER;Centre
|
||||
TP_GRADIENT_CENTER_X;Centre X
|
||||
@ -97,6 +99,7 @@ TP_LABCURVE_AVOIDCOLORSHIFT_TOOLTIP;Fit colours into gamut of the working colour
|
||||
TP_PCVIGNETTE_FEATHER_TOOLTIP;Feathering:\n0 = corners only,\n50 = halfway to centre,\n100 = to centre.
|
||||
TP_PFCURVE_CURVEEDITOR_CH_TOOLTIP;Controls defringe strength by colour.\nHigher = more,\nLower = less.
|
||||
TP_RAW_FALSECOLOR;False colour suppression steps
|
||||
TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
TP_RGBCURVES_LUMAMODE_TOOLTIP;<b>Luminosity mode</b> allows to vary the contribution of R, G and B channels to the luminosity of the image, without altering image colour.
|
||||
TP_VIBRANCE_AVOIDCOLORSHIFT;Avoid colour shift
|
||||
TP_VIGNETTING_CENTER;Centre
|
||||
@ -106,6 +109,7 @@ TP_WAVELET_AVOID;Avoid colour shift
|
||||
TP_WAVELET_CBENAB;Toning and Colour Balance
|
||||
TP_WAVELET_CB_TOOLTIP;For strong values product colour-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted
|
||||
TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colours.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored.
|
||||
TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centreed on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "white balance" by modulating the blue/red balance.\nThis can be useful when shooting conditions:\na) are far from the standard illuminant (e.g. underwater),\nb) are far from conditions where calibrations were performed,\nc) where the matrices or ICC profiles are unsuitable.
|
||||
|
||||
!!!!!!!!!!!!!!!!!!!!!!!!!
|
||||
@ -166,6 +170,7 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
|
||||
!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
|
||||
!EXIFFILTER_FILETYPE;File type
|
||||
!EXIFFILTER_FOCALLEN;Focal length
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFFILTER_ISO;ISO
|
||||
!EXIFFILTER_LENS;Lens
|
||||
!EXIFFILTER_METADATAFILTER;Enable metadata filters
|
||||
@ -809,7 +814,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
!HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness
|
||||
@ -1576,7 +1580,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
|
||||
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
|
||||
!TP_EXPOSURE_BLACKLEVEL;Black
|
||||
!TP_EXPOSURE_BRIGHTNESS;Lightness
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLIP;Clip %
|
||||
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
|
||||
!TP_EXPOSURE_COMPRHIGHLIGHTS;Highlight compression
|
||||
@ -1792,53 +1795,33 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2078,7 +2061,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -57,6 +57,7 @@
|
||||
!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
|
||||
!EXIFFILTER_FILETYPE;File type
|
||||
!EXIFFILTER_FOCALLEN;Focal length
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFFILTER_ISO;ISO
|
||||
!EXIFFILTER_LENS;Lens
|
||||
!EXIFFILTER_METADATAFILTER;Enable metadata filters
|
||||
@ -724,7 +725,7 @@
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1550,7 +1551,7 @@
|
||||
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
|
||||
!TP_EXPOSURE_BLACKLEVEL;Black
|
||||
!TP_EXPOSURE_BRIGHTNESS;Lightness
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_CLIP;Clip %
|
||||
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
|
||||
!TP_EXPOSURE_COMPRHIGHLIGHTS;Highlight compression
|
||||
@ -1782,53 +1783,34 @@
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2077,7 +2059,7 @@
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -1501,6 +1501,7 @@ ZOOMPANEL_ZOOMOUT;Reducir Zoom\nAtajo: <b>-</b>
|
||||
!DYNPROFILEEDITOR_NEW;New
|
||||
!DYNPROFILEEDITOR_NEW_RULE;New Dynamic Profile Rule
|
||||
!DYNPROFILEEDITOR_PROFILE;Processing Profile
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
|
||||
@ -1708,7 +1709,7 @@ ZOOMPANEL_ZOOMOUT;Reducir Zoom\nAtajo: <b>-</b>
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1932,7 +1933,7 @@ ZOOMPANEL_ZOOMOUT;Reducir Zoom\nAtajo: <b>-</b>
|
||||
!TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts
|
||||
!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
|
||||
!TP_EPD_GAMMA;Gamma
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
|
||||
!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
|
||||
@ -1987,53 +1988,34 @@ ZOOMPANEL_ZOOMOUT;Reducir Zoom\nAtajo: <b>-</b>
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_VNG4;VNG4
|
||||
!TP_RETINEX_CONTEDIT_HSL;Histogram equalizer HSL
|
||||
@ -2199,7 +2181,7 @@ ZOOMPANEL_ZOOMOUT;Reducir Zoom\nAtajo: <b>-</b>
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -459,6 +459,7 @@ TP_WBALANCE_TEMPERATURE;Tenperatura
|
||||
!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
|
||||
!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
|
||||
!EXIFFILTER_FILETYPE;File type
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFFILTER_METADATAFILTER;Enable metadata filters
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
@ -975,7 +976,7 @@ TP_WBALANCE_TEMPERATURE;Tenperatura
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1621,7 +1622,7 @@ TP_WBALANCE_TEMPERATURE;Tenperatura
|
||||
!TP_EPD_STRENGTH;Strength
|
||||
!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
|
||||
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
|
||||
!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
|
||||
!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
|
||||
@ -1831,53 +1832,34 @@ TP_WBALANCE_TEMPERATURE;Tenperatura
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2092,7 +2074,7 @@ TP_WBALANCE_TEMPERATURE;Tenperatura
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -1776,8 +1776,6 @@ TP_RAW_NONE;Aucun (montre ce que voit le capteur)
|
||||
TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
TP_RAW_PIXELSHIFTADAPTIVE;Détection adaptative
|
||||
TP_RAW_PIXELSHIFTBLUR;Flouter le masque de mouvement
|
||||
TP_RAW_PIXELSHIFTEPERISO;Adaptation ISO
|
||||
TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;La valeur par défaut de 0 devrait bien fonctionner pour l'ISO de base.\nAugmenter la valeur pour améliorer la détection de mouvement pour les ISO plus haut.\nAugmentez par petit incrément et vérifier le masque de mouvement à chaque itération.
|
||||
TP_RAW_PIXELSHIFTEQUALBRIGHT;Égaliser la luminosité des sous-images
|
||||
TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Égaliser par canal
|
||||
TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Activé: Égalise les canaux RVB individuellement.\nDésactivé: Utilise le même facteur d'égalisation pour tous les canaux.
|
||||
@ -1813,7 +1811,6 @@ TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Poid Rouge&Bleu
|
||||
TP_RAW_PIXELSHIFTSHOWMOTION;Voir le masque de mouvement
|
||||
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Voir uniquement le masque
|
||||
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Affiche le masque sans l'image.
|
||||
TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Superpose sur l'image le masque montrant les zones avec mouvement.
|
||||
TP_RAW_PIXELSHIFTSIGMA;Rayon de floutage
|
||||
TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;Le rayon par défaut de 1.0 fonctionne généralement bien pour l'ISO de base.\nAugmentez cette valeur pour les images de haut ISO, 5.0 est un bon point de départ.\nContrôlez le masque de mouvement à chaque nouvelle valeur.
|
||||
TP_RAW_PIXELSHIFTSMOOTH;Adoucir les transitions
|
||||
@ -2213,14 +2210,15 @@ ZOOMPANEL_ZOOMOUT;Zoom Arrière\nRaccourci: <b>-</b>
|
||||
! Untranslated keys follow; remove the ! prefix after an entry is translated.
|
||||
!!!!!!!!!!!!!!!!!!!!!!!!!
|
||||
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_PREPROCESS_LINEDENOISE_DIRECTION;Line noise filter direction
|
||||
!HISTORY_MSG_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
|
||||
!PREFERENCES_THUMBNAIL_INSPECTOR_JPEG;Embedded JPEG preview
|
||||
!PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
|
||||
!PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
|
||||
!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_PREPROCESS_LINEDENOISE_DIRECTION;Direction
|
||||
!TP_PREPROCESS_LINEDENOISE_DIRECTION_BOTH;Both
|
||||
!TP_PREPROCESS_LINEDENOISE_DIRECTION_HORIZONTAL;Horizontal
|
||||
@ -2228,3 +2226,6 @@ ZOOMPANEL_ZOOMOUT;Zoom Arrière\nRaccourci: <b>-</b>
|
||||
!TP_PREPROCESS_LINEDENOISE_DIRECTION_VERTICAL;Vertical
|
||||
!TP_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
|
||||
!TP_PREPROCESS_PDAFLINESFILTER_TOOLTIP;Tries to suppress stripe noise caused by on-sensor PDAF pixels, occurring with some Sony mirrorless cameras on some backlit scenes with visible flare.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
|
||||
@ -458,6 +458,7 @@ TP_WBALANCE_TEMPERATURE;Θερμοκρασία
|
||||
!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
|
||||
!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
|
||||
!EXIFFILTER_FILETYPE;File type
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFFILTER_METADATAFILTER;Enable metadata filters
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
@ -974,7 +975,7 @@ TP_WBALANCE_TEMPERATURE;Θερμοκρασία
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1620,7 +1621,7 @@ TP_WBALANCE_TEMPERATURE;Θερμοκρασία
|
||||
!TP_EPD_STRENGTH;Strength
|
||||
!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
|
||||
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
|
||||
!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
|
||||
!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
|
||||
@ -1830,53 +1831,34 @@ TP_WBALANCE_TEMPERATURE;Θερμοκρασία
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2091,7 +2073,7 @@ TP_WBALANCE_TEMPERATURE;Θερμοκρασία
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -459,6 +459,7 @@ TP_WBALANCE_TEMPERATURE;מידת חום
|
||||
!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
|
||||
!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
|
||||
!EXIFFILTER_FILETYPE;File type
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFFILTER_METADATAFILTER;Enable metadata filters
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
@ -975,7 +976,7 @@ TP_WBALANCE_TEMPERATURE;מידת חום
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1621,7 +1622,7 @@ TP_WBALANCE_TEMPERATURE;מידת חום
|
||||
!TP_EPD_STRENGTH;Strength
|
||||
!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
|
||||
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
|
||||
!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
|
||||
!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
|
||||
@ -1831,53 +1832,34 @@ TP_WBALANCE_TEMPERATURE;מידת חום
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2092,7 +2074,7 @@ TP_WBALANCE_TEMPERATURE;מידת חום
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -1336,6 +1336,7 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: <b>-</b>
|
||||
!DYNPROFILEEDITOR_NEW;New
|
||||
!DYNPROFILEEDITOR_NEW_RULE;New Dynamic Profile Rule
|
||||
!DYNPROFILEEDITOR_PROFILE;Processing Profile
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
|
||||
@ -1583,7 +1584,7 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: <b>-</b>
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1852,7 +1853,7 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: <b>-</b>
|
||||
!TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts
|
||||
!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
|
||||
!TP_EPD_GAMMA;Gamma
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
|
||||
!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
|
||||
@ -1925,53 +1926,34 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: <b>-</b>
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2140,7 +2122,7 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: <b>-</b>
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -1866,6 +1866,7 @@ ZOOMPANEL_ZOOMOUT;ズームアウト\nショートカット: <b>-</b>
|
||||
!DYNPROFILEEDITOR_NEW;New
|
||||
!DYNPROFILEEDITOR_NEW_RULE;New Dynamic Profile Rule
|
||||
!DYNPROFILEEDITOR_PROFILE;Processing Profile
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
!EXPORT_PIPELINE;Processing pipeline
|
||||
@ -1954,7 +1955,7 @@ ZOOMPANEL_ZOOMOUT;ズームアウト\nショートカット: <b>-</b>
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -2085,7 +2086,7 @@ ZOOMPANEL_ZOOMOUT;ズームアウト\nショートカット: <b>-</b>
|
||||
!TP_DIRPYRDENOISE_TYPE_7X7;7×7
|
||||
!TP_DIRPYRDENOISE_TYPE_9X9;9×9
|
||||
!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
|
||||
!TP_FILMSIMULATION_SLOWPARSEDIR;RawTherapee is configured to look for Hald CLUT images, which are used for the Film Simulation tool, in a folder which is taking too long to load.\nGo to Preferences > Image Processing > Film Simulation\nto see which folder is being used. You should either point RawTherapee to a folder which contains only Hald CLUT images and nothing more, or to an empty folder if you don't want to use the Film Simulation tool.\n\nRead the Film Simulation article in RawPedia for more information.\n\nDo you want to cancel the scan now?
|
||||
@ -2125,53 +2126,34 @@ ZOOMPANEL_ZOOMOUT;ズームアウト\nショートカット: <b>-</b>
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_VNG4;VNG4
|
||||
!TP_RETINEX_CONTEDIT_HSL;Histogram equalizer HSL
|
||||
|
||||
@ -459,6 +459,7 @@ TP_WBALANCE_TEMPERATURE;Temperatūra
|
||||
!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
|
||||
!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
|
||||
!EXIFFILTER_FILETYPE;File type
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFFILTER_METADATAFILTER;Enable metadata filters
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
@ -975,7 +976,7 @@ TP_WBALANCE_TEMPERATURE;Temperatūra
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1621,7 +1622,7 @@ TP_WBALANCE_TEMPERATURE;Temperatūra
|
||||
!TP_EPD_STRENGTH;Strength
|
||||
!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
|
||||
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
|
||||
!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
|
||||
!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
|
||||
@ -1831,53 +1832,34 @@ TP_WBALANCE_TEMPERATURE;Temperatūra
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2092,7 +2074,7 @@ TP_WBALANCE_TEMPERATURE;Temperatūra
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -885,6 +885,7 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés <b>-</b>
|
||||
!DYNPROFILEEDITOR_PROFILE;Processing Profile
|
||||
!EDIT_OBJECT_TOOLTIP;Displays a widget on the preview window which lets you adjust this tool.
|
||||
!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
|
||||
@ -1248,7 +1249,7 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés <b>-</b>
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1749,7 +1750,7 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés <b>-</b>
|
||||
!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
|
||||
!TP_EPD_GAMMA;Gamma
|
||||
!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
|
||||
!TP_EXPOSURE_CURVEEDITOR2;Tone curve 2
|
||||
!TP_EXPOSURE_CURVEEDITOR2_TOOLTIP;Please refer to the "Exposure > Tone Curves" RawPedia article to learn how to achieve the best results by using two tone curves.
|
||||
@ -1902,53 +1903,34 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés <b>-</b>
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2131,7 +2113,7 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés <b>-</b>
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -1690,8 +1690,6 @@ TP_RAW_NONE;Geen (Toont sensor patroon)
|
||||
TP_RAW_PIXELSHIFT;Pixel Verschuiven
|
||||
TP_RAW_PIXELSHIFTADAPTIVE;Adaptieve detectie
|
||||
TP_RAW_PIXELSHIFTBLUR;Vervaag bewegingsmasker
|
||||
TP_RAW_PIXELSHIFTEPERISO;ISO toepassing
|
||||
TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;De standaard waarde (0.0) werkt goed voor normale ISO.\nVergroot de waarde om de bewegingsdetectie te verbeteren voor hogere ISO.\nVergroot in kleine stappen en bekijk het bewegingsmasker tijdens het verhogen.
|
||||
TP_RAW_PIXELSHIFTEQUALBRIGHT;Balanseer de helderheid van de frames
|
||||
TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Balanseer de helderheid van de frames t.o.v. de helderheid van het geslecteerde frame.\nAls er overbelichte gebieden zijn in de frames, selecteer dan het helderste frame om een magenta kleurzweem te vermijden of selecteer bewegingsorrectie.
|
||||
TP_RAW_PIXELSHIFTEXP0;Experimenteel
|
||||
@ -1723,7 +1721,6 @@ TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Rood&Blauw gewicht
|
||||
TP_RAW_PIXELSHIFTSHOWMOTION;Toon beweging
|
||||
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Toon alleen masker
|
||||
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Toont het bewegingsmasker zonder de afbeelding
|
||||
TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Maakt een doorzichtig masker dat de gebieden toont met beweging
|
||||
TP_RAW_PIXELSHIFTSIGMA;Vervagen straal
|
||||
TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;De standaard straal van 1.0 is goed voor normale ISO. Verhoog de waarde voor hogere ISO.\n5.0 is een goed startpunt voor hoge ISO afbeeldingen.\nControleer het bewegingsmasker bij het veranderen van de waarde.
|
||||
TP_RAW_PIXELSHIFTSMOOTH;Zachte overgang
|
||||
@ -2119,6 +2116,7 @@ ZOOMPANEL_ZOOMOUT;Zoom uit\nSneltoets: <b>-</b>
|
||||
|
||||
!BATCHQUEUE_STARTSTOPHINT;Start or stop processing the images in the queue.\n\nShortcut: <b>Ctrl</b>+<b>s</b>
|
||||
!DONT_SHOW_AGAIN;Don't show this message again.
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!GENERAL_SLIDER;Slider
|
||||
!GIMP_PLUGIN_INFO;Welcome to the RawTherapee GIMP plugin!\nOnce you are done editing, simply close the main RawTherapee window and the image will be automatically imported in GIMP.
|
||||
@ -2146,7 +2144,7 @@ ZOOMPANEL_ZOOMOUT;Zoom uit\nSneltoets: <b>-</b>
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -2215,7 +2213,7 @@ ZOOMPANEL_ZOOMOUT;Zoom uit\nSneltoets: <b>-</b>
|
||||
!TP_COLORTONING_LABGRID_VALUES;HL: a=%1 b=%2\nS: a=%3 b=%4
|
||||
!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
|
||||
!TP_DIRPYRDENOISE_LABEL;Noise Reduction
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
|
||||
!TP_LOCALCONTRAST_AMOUNT;Amount
|
||||
@ -2235,10 +2233,11 @@ ZOOMPANEL_ZOOMOUT;Zoom uit\nSneltoets: <b>-</b>
|
||||
!TP_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
|
||||
!TP_PREPROCESS_PDAFLINESFILTER_TOOLTIP;Tries to suppress stripe noise caused by on-sensor PDAF pixels, occurring with some Sony mirrorless cameras on some backlit scenes with visible flare.
|
||||
!TP_RAW_IMAGENUM_TOOLTIP;Some raw files consist of several sub-images (Pentax/Sony Pixel Shift, Pentax 3-in-1 HDR, Canon Dual Pixel).\n\nWhen using any demosaicing method other than Pixel Shift, this selects which sub-image is used.\n\nWhen using the Pixel Shift demosaicing method on a Pixel Shift raw, all sub-images are used, and this selects which sub-image should be used for moving parts.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
|
||||
!TP_RETINEX_GAINTRANSMISSION;Gain transmission
|
||||
|
||||
@ -458,6 +458,7 @@ TP_WBALANCE_TEMPERATURE;Temperatur
|
||||
!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
|
||||
!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
|
||||
!EXIFFILTER_FILETYPE;File type
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFFILTER_METADATAFILTER;Enable metadata filters
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
@ -974,7 +975,7 @@ TP_WBALANCE_TEMPERATURE;Temperatur
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1620,7 +1621,7 @@ TP_WBALANCE_TEMPERATURE;Temperatur
|
||||
!TP_EPD_STRENGTH;Strength
|
||||
!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
|
||||
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
|
||||
!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
|
||||
!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
|
||||
@ -1830,53 +1831,34 @@ TP_WBALANCE_TEMPERATURE;Temperatur
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2091,7 +2073,7 @@ TP_WBALANCE_TEMPERATURE;Temperatur
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -1459,6 +1459,7 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: <b>-</b>
|
||||
!DYNPROFILEEDITOR_NEW;New
|
||||
!DYNPROFILEEDITOR_NEW_RULE;New Dynamic Profile Rule
|
||||
!DYNPROFILEEDITOR_PROFILE;Processing Profile
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
|
||||
@ -1665,7 +1666,7 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: <b>-</b>
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1880,7 +1881,7 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: <b>-</b>
|
||||
!TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts
|
||||
!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
|
||||
!TP_EPD_GAMMA;Gamma
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
|
||||
!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
|
||||
@ -1934,53 +1935,34 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: <b>-</b>
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_VNG4;VNG4
|
||||
!TP_RETINEX_CONTEDIT_HSL;Histogram equalizer HSL
|
||||
@ -2146,7 +2128,7 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: <b>-</b>
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -1459,6 +1459,7 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrot: <b>-</b>
|
||||
!DYNPROFILEEDITOR_NEW;New
|
||||
!DYNPROFILEEDITOR_NEW_RULE;New Dynamic Profile Rule
|
||||
!DYNPROFILEEDITOR_PROFILE;Processing Profile
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
|
||||
@ -1665,7 +1666,7 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrot: <b>-</b>
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1880,7 +1881,7 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrot: <b>-</b>
|
||||
!TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts
|
||||
!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
|
||||
!TP_EPD_GAMMA;Gamma
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
|
||||
!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
|
||||
@ -1934,53 +1935,34 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrot: <b>-</b>
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_VNG4;VNG4
|
||||
!TP_RETINEX_CONTEDIT_HSL;Histogram equalizer HSL
|
||||
@ -2146,7 +2128,7 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrot: <b>-</b>
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -812,7 +812,8 @@ MAIN_MSG_CANNOTSTARTEDITOR;Não é possível iniciar o editor.
|
||||
! Untranslated keys follow; remove the ! prefix after an entry is translated.
|
||||
!!!!!!!!!!!!!!!!!!!!!!!!!
|
||||
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!MAIN_MSG_CANNOTSTARTEDITOR_SECONDARY;Please set the correct path in Preferences.
|
||||
!MAIN_MSG_EMPTYFILENAME;Filename unspecified!
|
||||
!MAIN_MSG_IMAGEUNPROCESSED;This command requires all selected images to be queue-processed first.
|
||||
@ -1552,7 +1553,7 @@ MAIN_MSG_CANNOTSTARTEDITOR;Não é possível iniciar o editor.
|
||||
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
|
||||
!TP_EXPOSURE_BLACKLEVEL;Black
|
||||
!TP_EXPOSURE_BRIGHTNESS;Lightness
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_CLIP;Clip %
|
||||
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
|
||||
!TP_EXPOSURE_COMPRHIGHLIGHTS;Highlight compression
|
||||
@ -1784,53 +1785,34 @@ MAIN_MSG_CANNOTSTARTEDITOR;Não é possível iniciar o editor.
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2079,7 +2061,7 @@ MAIN_MSG_CANNOTSTARTEDITOR;Não é possível iniciar o editor.
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -1420,6 +1420,7 @@ ZOOMPANEL_ZOOMOUT;Отдалить\nГорячая клавиша: <b>-</b>
|
||||
!CURVEEDITOR_EDITPOINT_HINT;Enable edition of node in/out values.\n\nRight-click on a node to select it.\nRight-click on empty space to de-select the node.
|
||||
!EDIT_OBJECT_TOOLTIP;Displays a widget on the preview window which lets you adjust this tool.
|
||||
!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
|
||||
@ -1650,7 +1651,7 @@ ZOOMPANEL_ZOOMOUT;Отдалить\nГорячая клавиша: <b>-</b>
|
||||
!HISTORY_MSG_485;Lens Correction
|
||||
!HISTORY_MSG_486;Lens Correction - Camera
|
||||
!HISTORY_MSG_487;Lens Correction - Lens
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_PREPROCESS_LINEDENOISE_DIRECTION;Line noise filter direction
|
||||
!HISTORY_MSG_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
|
||||
@ -1899,7 +1900,7 @@ ZOOMPANEL_ZOOMOUT;Отдалить\nГорячая клавиша: <b>-</b>
|
||||
!TP_DIRPYREQUALIZER_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
|
||||
!TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image.
|
||||
!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points
|
||||
!TP_EXPOS_WHITEPOINT_LABEL;Raw White Points
|
||||
!TP_FILMSIMULATION_SLOWPARSEDIR;RawTherapee is configured to look for Hald CLUT images, which are used for the Film Simulation tool, in a folder which is taking too long to load.\nGo to Preferences > Image Processing > Film Simulation\nto see which folder is being used. You should either point RawTherapee to a folder which contains only Hald CLUT images and nothing more, or to an empty folder if you don't want to use the Film Simulation tool.\n\nRead the Film Simulation article in RawPedia for more information.\n\nDo you want to cancel the scan now?
|
||||
@ -1942,53 +1943,34 @@ ZOOMPANEL_ZOOMOUT;Отдалить\nГорячая клавиша: <b>-</b>
|
||||
!TP_RAW_3PASSBEST;3-Pass (Best)
|
||||
!TP_RAW_IMAGENUM;Sub-image
|
||||
!TP_RAW_IMAGENUM_TOOLTIP;Some raw files consist of several sub-images (Pentax/Sony Pixel Shift, Pentax 3-in-1 HDR, Canon Dual Pixel).\n\nWhen using any demosaicing method other than Pixel Shift, this selects which sub-image is used.\n\nWhen using the Pixel Shift demosaicing method on a Pixel Shift raw, all sub-images are used, and this selects which sub-image should be used for moving parts.
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
!TP_RETINEX_CONTEDIT_HSL;Histogram equalizer HSL
|
||||
!TP_RETINEX_CONTEDIT_LAB;Histogram equalizer L*a*b*
|
||||
@ -2146,7 +2128,7 @@ ZOOMPANEL_ZOOMOUT;Отдалить\nГорячая клавиша: <b>-</b>
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -1296,6 +1296,7 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике <b>-</b>
|
||||
!DYNPROFILEEDITOR_PROFILE;Processing Profile
|
||||
!EDIT_OBJECT_TOOLTIP;Displays a widget on the preview window which lets you adjust this tool.
|
||||
!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
|
||||
@ -1559,7 +1560,7 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике <b>-</b>
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1852,7 +1853,7 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике <b>-</b>
|
||||
!TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image.
|
||||
!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
|
||||
!TP_EPD_GAMMA;Gamma
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
|
||||
!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
|
||||
@ -1926,53 +1927,34 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике <b>-</b>
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2141,7 +2123,7 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике <b>-</b>
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -1296,6 +1296,7 @@ ZOOMPANEL_ZOOMOUT;Umanjuje prikaz slike <b>-</b>
|
||||
!DYNPROFILEEDITOR_PROFILE;Processing Profile
|
||||
!EDIT_OBJECT_TOOLTIP;Displays a widget on the preview window which lets you adjust this tool.
|
||||
!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
|
||||
@ -1559,7 +1560,7 @@ ZOOMPANEL_ZOOMOUT;Umanjuje prikaz slike <b>-</b>
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1852,7 +1853,7 @@ ZOOMPANEL_ZOOMOUT;Umanjuje prikaz slike <b>-</b>
|
||||
!TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image.
|
||||
!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
|
||||
!TP_EPD_GAMMA;Gamma
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
|
||||
!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
|
||||
@ -1926,53 +1927,34 @@ ZOOMPANEL_ZOOMOUT;Umanjuje prikaz slike <b>-</b>
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2141,7 +2123,7 @@ ZOOMPANEL_ZOOMOUT;Umanjuje prikaz slike <b>-</b>
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -539,6 +539,7 @@ ZOOMPANEL_ZOOMOUT;Oddialiť <b>-</b>
|
||||
!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
|
||||
!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
|
||||
!EXIFFILTER_FILETYPE;File type
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
!EXPORT_BYPASS_ALL;Select / Unselect All
|
||||
@ -1037,7 +1038,7 @@ ZOOMPANEL_ZOOMOUT;Oddialiť <b>-</b>
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1650,7 +1651,7 @@ ZOOMPANEL_ZOOMOUT;Oddialiť <b>-</b>
|
||||
!TP_EPD_STRENGTH;Strength
|
||||
!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
|
||||
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
|
||||
!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
|
||||
!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
|
||||
@ -1843,53 +1844,34 @@ ZOOMPANEL_ZOOMOUT;Oddialiť <b>-</b>
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2101,7 +2083,7 @@ ZOOMPANEL_ZOOMOUT;Oddialiť <b>-</b>
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -460,6 +460,7 @@ TP_WBALANCE_TEMPERATURE;Lämpötila [K]
|
||||
!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
|
||||
!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
|
||||
!EXIFFILTER_FILETYPE;File type
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFFILTER_METADATAFILTER;Enable metadata filters
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
@ -976,7 +977,7 @@ TP_WBALANCE_TEMPERATURE;Lämpötila [K]
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1621,7 +1622,7 @@ TP_WBALANCE_TEMPERATURE;Lämpötila [K]
|
||||
!TP_EPD_STRENGTH;Strength
|
||||
!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
|
||||
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
|
||||
!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
|
||||
!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
|
||||
@ -1831,53 +1832,34 @@ TP_WBALANCE_TEMPERATURE;Lämpötila [K]
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2092,7 +2074,7 @@ TP_WBALANCE_TEMPERATURE;Lämpötila [K]
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -1875,6 +1875,7 @@ ZOOMPANEL_ZOOMOUT;Förminska.\nKortkommando: <b>-</b>
|
||||
!DYNPROFILEEDITOR_NEW;New
|
||||
!DYNPROFILEEDITOR_NEW_RULE;New Dynamic Profile Rule
|
||||
!DYNPROFILEEDITOR_PROFILE;Processing Profile
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
!EXPORT_PIPELINE;Processing pipeline
|
||||
@ -1945,7 +1946,7 @@ ZOOMPANEL_ZOOMOUT;Förminska.\nKortkommando: <b>-</b>
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -2075,7 +2076,7 @@ ZOOMPANEL_ZOOMOUT;Förminska.\nKortkommando: <b>-</b>
|
||||
!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
|
||||
!TP_DIRPYREQUALIZER_HUESKIN_TOOLTIP;This pyramid is for the upper part, so far as the algorithm at its maximum efficiency.\nTo the lower part, the transition zones.\nIf you need to move the area significantly to the left or right - or if there are artifacts: the <b>white balance is incorrect</b>\nYou can slightly reduce the zone to prevent the rest of the image is affected.
|
||||
!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
|
||||
!TP_FLATFIELD_CLIPCONTROL;Clip control
|
||||
@ -2116,53 +2117,34 @@ ZOOMPANEL_ZOOMOUT;Förminska.\nKortkommando: <b>-</b>
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_VNG4;VNG4
|
||||
!TP_RETINEX_CONTEDIT_MAP;Mask equalizer
|
||||
@ -2203,7 +2185,7 @@ ZOOMPANEL_ZOOMOUT;Förminska.\nKortkommando: <b>-</b>
|
||||
!TP_WAVELET_EDGEDETECTTHR;Threshold low (noise)
|
||||
!TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection)
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_HIGHLIGHT;Highlight luminance range
|
||||
!TP_WAVELET_HS1;Whole luminance range
|
||||
|
||||
@ -459,6 +459,7 @@ TP_WBALANCE_TEMPERATURE;Isı
|
||||
!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
|
||||
!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
|
||||
!EXIFFILTER_FILETYPE;File type
|
||||
!EXIFFILTER_IMAGETYPE;Image type
|
||||
!EXIFFILTER_METADATAFILTER;Enable metadata filters
|
||||
!EXIFPANEL_SHOWALL;Show all
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
@ -975,7 +976,7 @@ TP_WBALANCE_TEMPERATURE;Isı
|
||||
!HISTORY_MSG_491;White Balance
|
||||
!HISTORY_MSG_492;RGB Curves
|
||||
!HISTORY_MSG_493;L*a*b* Adjustments
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
!HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
!HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1620,7 +1621,7 @@ TP_WBALANCE_TEMPERATURE;Isı
|
||||
!TP_EPD_STRENGTH;Strength
|
||||
!TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
|
||||
!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
|
||||
!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
|
||||
!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
|
||||
@ -1830,53 +1831,34 @@ TP_WBALANCE_TEMPERATURE;Isı
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTEPERISO;ISO adaption
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nIncrease the value to improve motion detection for higher ISO.\nIncrease in small steps and watch the motion mask while increasing.
|
||||
!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
|
||||
!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTEXP0;Experimental
|
||||
!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
|
||||
!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
|
||||
!TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
|
||||
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3;Exclude selected frame from median
|
||||
!TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excludes selected frame from median.\nUseful if moving objects overlap in frame 2 and 3
|
||||
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
|
||||
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
|
||||
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
|
||||
!TP_RAW_PIXELSHIFTMM_OFF;Off
|
||||
!TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
|
||||
!TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
|
||||
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
|
||||
!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
|
||||
!TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
|
||||
!TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green AMaZE
|
||||
!TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
|
||||
!TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
|
||||
!TP_RAW_PIXELSHIFTNREADISO;nRead
|
||||
!TP_RAW_PIXELSHIFTONEGREEN;Use one green instead of average
|
||||
!TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use one green instead of averaging two greens for regions without motion.
|
||||
!TP_RAW_PIXELSHIFTPRNU;PRNU (%)
|
||||
!TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
|
||||
!TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
|
||||
!TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
|
||||
!TP_RAW_RCD;RCD
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
@ -2091,7 +2073,7 @@ TP_WBALANCE_TEMPERATURE;Isı
|
||||
!TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
!TP_WAVELET_EDGTHRESH;Detail
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
!TP_WAVELET_EDRAD;Radius
|
||||
!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
!TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -724,7 +724,7 @@ HISTORY_MSG_490;HDR TM - Amount
|
||||
HISTORY_MSG_491;White Balance
|
||||
HISTORY_MSG_492;RGB Curves
|
||||
HISTORY_MSG_493;L*a*b* Adjustments
|
||||
HISTORY_MSG_CLAMPOOG;Out-of-gamut colours clipping
|
||||
HISTORY_MSG_CLAMPOOG;Out-of-gamut color clipping
|
||||
HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
|
||||
HISTORY_MSG_HISTMATCHING;Auto-Matched Tone Curve
|
||||
HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
|
||||
@ -1556,7 +1556,7 @@ TP_EXPOSURE_AUTOLEVELS;Auto Levels
|
||||
TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
|
||||
TP_EXPOSURE_BLACKLEVEL;Black
|
||||
TP_EXPOSURE_BRIGHTNESS;Lightness
|
||||
TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colours
|
||||
TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
|
||||
TP_EXPOSURE_CLIP;Clip %
|
||||
TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
|
||||
TP_EXPOSURE_COMPRHIGHLIGHTS;Highlight compression
|
||||
@ -1832,7 +1832,7 @@ TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for bas
|
||||
TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
|
||||
TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
|
||||
TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
|
||||
TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta colour cast in overexposed areas or enable motion correction.
|
||||
TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
|
||||
TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
|
||||
TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
|
||||
TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
|
||||
@ -1854,6 +1854,7 @@ TP_RAW_PIXELSHIFTSIGMA;Blur radius
|
||||
TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
|
||||
TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
|
||||
TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
|
||||
TP_RAW_RCD;RCD
|
||||
TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
TP_RAW_SENSOR_XTRANS_LABEL;Sensor with X-Trans Matrix
|
||||
@ -2101,7 +2102,7 @@ TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sens
|
||||
TP_WAVELET_EDGESENSI;Edge sensitivity
|
||||
TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
|
||||
TP_WAVELET_EDGTHRESH;Detail
|
||||
TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
|
||||
TP_WAVELET_EDRAD;Radius
|
||||
TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
|
||||
TP_WAVELET_EDSL;Threshold Sliders
|
||||
|
||||
@ -120,6 +120,7 @@ set(RTENGINESOURCEFILES
|
||||
histmatching.cc
|
||||
pdaflinesfilter.cc
|
||||
gamutwarning.cc
|
||||
ipshadowshighlights.cc
|
||||
xtrans_demosaic.cc
|
||||
)
|
||||
|
||||
|
||||
@ -24,6 +24,8 @@
|
||||
/*RT*/#define DJGPP
|
||||
/*RT*/#include "jpeg.h"
|
||||
|
||||
#include <utility>
|
||||
#include <vector>
|
||||
#include "opthelper.h"
|
||||
|
||||
/*
|
||||
@ -9095,7 +9097,7 @@ void CLASS identify()
|
||||
filters = 0;
|
||||
simple_coeff(0);
|
||||
adobe_coeff (make, model);
|
||||
} else if (!strcmp(make,"Canon") && tiff_bps == 15) {
|
||||
} else if (!strcmp(make,"Canon") && tiff_bps == 15) { // Canon mRaw/sRaw
|
||||
switch (width) {
|
||||
case 3344: width -= 66;
|
||||
case 3872: width -= 6;
|
||||
@ -9104,9 +9106,27 @@ void CLASS identify()
|
||||
SWAP(height,width);
|
||||
SWAP(raw_height,raw_width);
|
||||
}
|
||||
if (width == 7200 && height == 3888) {
|
||||
raw_width = width = 6480;
|
||||
raw_height = height = 4320;
|
||||
|
||||
if(std::fabs(static_cast<float>(width) / height - 1.5f) > 0.02f) {
|
||||
// wrong image dimensions. Calculate correct dimensions. width / height should be close to 1.5
|
||||
std::vector<std::pair<float, int>> dimensions;
|
||||
|
||||
int size = width * height;
|
||||
int newHeight = sqrt(size / 1.48f);
|
||||
while (--newHeight && std::fabs(static_cast<float>(size) / (newHeight * newHeight) - 1.5f) <= 0.02f) {
|
||||
if(size % newHeight == 0) {
|
||||
dimensions.emplace_back(std::fabs(static_cast<float>(size) / (newHeight * newHeight) - 1.5f), newHeight);
|
||||
}
|
||||
}
|
||||
// find ratio closest to 1.5
|
||||
float val = 1.f;
|
||||
while(!dimensions.empty()) {
|
||||
if(dimensions.back().first < val) {
|
||||
raw_height = height = dimensions.back().second;
|
||||
raw_width = width = size / raw_height;
|
||||
}
|
||||
dimensions.pop_back();
|
||||
}
|
||||
}
|
||||
filters = 0;
|
||||
tiff_samples = colors = 3;
|
||||
|
||||
@ -42,7 +42,7 @@ extern const Settings* settings;
|
||||
|
||||
Crop::Crop(ImProcCoordinator* parent, EditDataProvider *editDataProvider, bool isDetailWindow)
|
||||
: PipetteBuffer(editDataProvider), origCrop(nullptr), laboCrop(nullptr), labnCrop(nullptr),
|
||||
cropImg(nullptr), cbuf_real(nullptr), cshmap(nullptr), transCrop(nullptr), cieCrop(nullptr), cbuffer(nullptr),
|
||||
cropImg (nullptr), cbuf_real (nullptr), transCrop (nullptr), cieCrop (nullptr), cbuffer (nullptr),
|
||||
updating(false), newUpdatePending(false), skip(10),
|
||||
cropx(0), cropy(0), cropw(-1), croph(-1),
|
||||
trafx(0), trafy(0), trafw(-1), trafh(-1),
|
||||
@ -807,40 +807,6 @@ void Crop::update(int todo)
|
||||
|
||||
}
|
||||
|
||||
// blurmap for shadow & highlights
|
||||
if ((todo & M_BLURMAP) && params.sh.enabled) {
|
||||
double radius = sqrt(double (skips(parent->fw, skip) * skips(parent->fw, skip) + skips(parent->fh, skip) * skips(parent->fh, skip))) / 2.0;
|
||||
double shradius = params.sh.radius;
|
||||
|
||||
if (!params.sh.hq) {
|
||||
shradius *= radius / 1800.0;
|
||||
}
|
||||
|
||||
if (!cshmap) {
|
||||
cshmap = new SHMap(cropw, croph, true);
|
||||
}
|
||||
|
||||
cshmap->update(baseCrop, shradius, parent->ipf.lumimul, params.sh.hq, skip);
|
||||
|
||||
if (parent->shmap->min_f < 65535.f) { // don't call forceStat with wrong values
|
||||
cshmap->forceStat(parent->shmap->max_f, parent->shmap->min_f, parent->shmap->avg);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// shadows & highlights & tone curve & convert to cielab
|
||||
/*int xref,yref;
|
||||
xref=000;yref=000;
|
||||
if (colortest && cropw>115 && croph>115)
|
||||
for(int j=1;j<5;j++){
|
||||
xref+=j*30;yref+=j*30;
|
||||
if (settings->verbose) printf("before rgbProc RGB Xr%i Yr%i Skip=%d R=%f G=%f B=%f gamma=%f \n",xref,yref,skip,
|
||||
baseCrop->r[(int)(xref/skip)][(int)(yref/skip)]/256,
|
||||
baseCrop->g[(int)(xref/skip)][(int)(yref/skip)]/256,
|
||||
baseCrop->b[(int)(xref/skip)][(int)(yref/skip)]/256,
|
||||
parent->imgsrc->getGamma());
|
||||
}*/
|
||||
|
||||
if (todo & M_INIT) {
|
||||
if (params.icm.wtrcin == "free") { //exec TRC IN free
|
||||
Glib::ustring profi;
|
||||
@ -898,7 +864,7 @@ void Crop::update(int todo)
|
||||
DCPProfile *dcpProf = parent->imgsrc->getDCP(params.icm, as);
|
||||
|
||||
LUTu histToneCurve;
|
||||
parent->ipf.rgbProc(baseCrop, laboCrop, this, parent->hltonecurve, parent->shtonecurve, parent->tonecurve, cshmap,
|
||||
parent->ipf.rgbProc (baseCrop, laboCrop, this, parent->hltonecurve, parent->shtonecurve, parent->tonecurve,
|
||||
params.toneCurve.saturation, parent->rCurve, parent->gCurve, parent->bCurve, parent->colourToningSatLimit, parent->colourToningSatLimitOpacity, parent->ctColorCurve, parent->ctOpacityCurve, parent->opautili, parent->clToningcurve, parent->cl2Toningcurve,
|
||||
parent->customToneCurve1, parent->customToneCurve2, parent->beforeToneCurveBW, parent->afterToneCurveBW, rrm, ggm, bbm,
|
||||
parent->bwAutoR, parent->bwAutoG, parent->bwAutoB, dcpProf, as, histToneCurve);
|
||||
@ -1185,11 +1151,6 @@ void Crop::freeAll()
|
||||
cbuffer = nullptr;
|
||||
}
|
||||
|
||||
if (cshmap) {
|
||||
delete cshmap;
|
||||
cshmap = nullptr;
|
||||
}
|
||||
|
||||
PipetteBuffer::flush();
|
||||
}
|
||||
|
||||
@ -1263,8 +1224,6 @@ bool Crop::setCropSizes(int rcx, int rcy, int rcw, int rch, int skip, bool inter
|
||||
orw = bw;
|
||||
orh = bh;
|
||||
|
||||
ProcParams& params = parent->params;
|
||||
|
||||
parent->ipf.transCoord(parent->fw, parent->fh, bx1, by1, bw, bh, orx, ory, orw, orh);
|
||||
|
||||
if (check_need_larger_crop_for_lcp_distortion(parent->fw, parent->fh, orx, ory, orw, orh, parent->params)) {
|
||||
@ -1377,11 +1336,6 @@ bool Crop::setCropSizes(int rcx, int rcy, int rcw, int rch, int skip, bool inter
|
||||
delete [] cbuf_real;
|
||||
}
|
||||
|
||||
if (cshmap) {
|
||||
delete cshmap;
|
||||
cshmap = nullptr;
|
||||
}
|
||||
|
||||
cbuffer = new float*[croph];
|
||||
cbuf_real = new float[(croph + 2)*cropw];
|
||||
|
||||
@ -1389,10 +1343,6 @@ bool Crop::setCropSizes(int rcx, int rcy, int rcw, int rch, int skip, bool inter
|
||||
cbuffer[i] = cbuf_real + cropw * i + cropw;
|
||||
}
|
||||
|
||||
if (params.sh.enabled) {
|
||||
cshmap = new SHMap(cropw, croph, true);
|
||||
}
|
||||
|
||||
if (editType == ET_PIPETTE) {
|
||||
PipetteBuffer::resize(cropw, croph);
|
||||
} else if (PipetteBuffer::bufferCreated()) {
|
||||
|
||||
@ -45,7 +45,6 @@ protected:
|
||||
LabImage* labnCrop; // "one chunk" allocation
|
||||
Image8* cropImg; // "one chunk" allocation ; displayed image in monitor color space, showing the output profile as well (soft-proofing enabled, which then correspond to workimg) or not
|
||||
float * cbuf_real; // "one chunk" allocation
|
||||
SHMap* cshmap; // per line allocation
|
||||
|
||||
// --- automatically allocated and deleted when necessary, and only renewed on size changes
|
||||
Imagefloat* transCrop; // "one chunk" allocation, allocated if necessary
|
||||
|
||||
@ -39,7 +39,7 @@ extern const Settings* settings;
|
||||
|
||||
ImProcCoordinator::ImProcCoordinator()
|
||||
: orig_prev(nullptr), oprevi(nullptr), oprevl(nullptr), nprevl(nullptr), fattal_11_dcrop_cache(nullptr), previmg(nullptr), workimg(nullptr),
|
||||
ncie(nullptr), imgsrc(nullptr), shmap(nullptr), lastAwbEqual(0.), lastAwbTempBias(0.0), ipf(¶ms, true), monitorIntent(RI_RELATIVE),
|
||||
ncie (nullptr), imgsrc (nullptr), lastAwbEqual (0.), lastAwbTempBias (0.0), ipf (¶ms, true), monitorIntent (RI_RELATIVE),
|
||||
softProof(false), gamutCheck(false), scale(10), highDetailPreprocessComputed(false), highDetailRawComputed(false),
|
||||
allocated(false), bwAutoR(-9000.f), bwAutoG(-9000.f), bwAutoB(-9000.f), CAMMean(NAN),
|
||||
|
||||
@ -448,23 +448,6 @@ void ImProcCoordinator::updatePreviewImage(int todo, Crop* cropCall)
|
||||
readyphase++;
|
||||
progress("Preparing shadow/highlight map...", 100 * readyphase / numofphases);
|
||||
|
||||
if ((todo & M_BLURMAP) && params.sh.enabled) {
|
||||
double radius = sqrt(double (pW * pW + pH * pH)) / 2.0;
|
||||
double shradius = params.sh.radius;
|
||||
|
||||
if (!params.sh.hq) {
|
||||
shradius *= radius / 1800.0;
|
||||
}
|
||||
|
||||
if (!shmap) {
|
||||
shmap = new SHMap(pW, pH, true);
|
||||
}
|
||||
|
||||
shmap->update(oprevi, shradius, ipf.lumimul, params.sh.hq, scale);
|
||||
}
|
||||
|
||||
|
||||
|
||||
readyphase++;
|
||||
|
||||
if (todo & M_AUTOEXP) {
|
||||
@ -649,7 +632,7 @@ void ImProcCoordinator::updatePreviewImage(int todo, Crop* cropCall)
|
||||
DCPProfile::ApplyState as;
|
||||
DCPProfile *dcpProf = imgsrc->getDCP(params.icm, as);
|
||||
|
||||
ipf.rgbProc(oprevi, oprevl, nullptr, hltonecurve, shtonecurve, tonecurve, shmap, params.toneCurve.saturation,
|
||||
ipf.rgbProc (oprevi, oprevl, nullptr, hltonecurve, shtonecurve, tonecurve, params.toneCurve.saturation,
|
||||
rCurve, gCurve, bCurve, colourToningSatLimit, colourToningSatLimitOpacity, ctColorCurve, ctOpacityCurve, opautili, clToningcurve, cl2Toningcurve, customToneCurve1, customToneCurve2, beforeToneCurveBW, afterToneCurveBW, rrm, ggm, bbm, bwAutoR, bwAutoG, bwAutoB, params.toneCurve.expcomp, params.toneCurve.hlcompr, params.toneCurve.hlcomprthresh, dcpProf, as, histToneCurve);
|
||||
|
||||
if (params.blackwhite.enabled && params.blackwhite.autoc && abwListener) {
|
||||
@ -994,12 +977,6 @@ void ImProcCoordinator::freeAll()
|
||||
|
||||
delete workimg;
|
||||
|
||||
if (shmap) {
|
||||
delete shmap;
|
||||
}
|
||||
|
||||
shmap = nullptr;
|
||||
|
||||
}
|
||||
|
||||
allocated = false;
|
||||
@ -1050,10 +1027,6 @@ void ImProcCoordinator::setScale(int prevscale)
|
||||
previmg = new Image8(pW, pH);
|
||||
workimg = new Image8(pW, pH);
|
||||
|
||||
if (params.sh.enabled) {
|
||||
shmap = new SHMap(pW, pH, true);
|
||||
}
|
||||
|
||||
allocated = true;
|
||||
}
|
||||
|
||||
|
||||
@ -64,8 +64,6 @@ protected:
|
||||
|
||||
ImageSource* imgsrc;
|
||||
|
||||
SHMap* shmap;
|
||||
|
||||
ColorTemp currWB;
|
||||
ColorTemp autoWB;
|
||||
|
||||
|
||||
@ -2007,15 +2007,15 @@ filmlike_clip (float *r, float *g, float *b)
|
||||
}
|
||||
|
||||
void ImProcFunctions::rgbProc (Imagefloat* working, LabImage* lab, PipetteBuffer *pipetteBuffer, LUTf & hltonecurve, LUTf & shtonecurve, LUTf & tonecurve,
|
||||
SHMap* shmap, int sat, LUTf & rCurve, LUTf & gCurve, LUTf & bCurve, float satLimit, float satLimitOpacity, const ColorGradientCurve & ctColorCurve, const OpacityCurve & ctOpacityCurve, bool opautili, LUTf & clToningcurve, LUTf & cl2Toningcurve,
|
||||
int sat, LUTf & rCurve, LUTf & gCurve, LUTf & bCurve, float satLimit, float satLimitOpacity, const ColorGradientCurve & ctColorCurve, const OpacityCurve & ctOpacityCurve, bool opautili, LUTf & clToningcurve, LUTf & cl2Toningcurve,
|
||||
const ToneCurve & customToneCurve1, const ToneCurve & customToneCurve2, const ToneCurve & customToneCurvebw1, const ToneCurve & customToneCurvebw2, double &rrm, double &ggm, double &bbm, float &autor, float &autog, float &autob, DCPProfile *dcpProf, const DCPProfile::ApplyState &asIn, LUTu &histToneCurve )
|
||||
{
|
||||
rgbProc (working, lab, pipetteBuffer, hltonecurve, shtonecurve, tonecurve, shmap, sat, rCurve, gCurve, bCurve, satLimit, satLimitOpacity, ctColorCurve, ctOpacityCurve, opautili, clToningcurve, cl2Toningcurve, customToneCurve1, customToneCurve2, customToneCurvebw1, customToneCurvebw2, rrm, ggm, bbm, autor, autog, autob, params->toneCurve.expcomp, params->toneCurve.hlcompr, params->toneCurve.hlcomprthresh, dcpProf, asIn, histToneCurve);
|
||||
rgbProc (working, lab, pipetteBuffer, hltonecurve, shtonecurve, tonecurve, sat, rCurve, gCurve, bCurve, satLimit, satLimitOpacity, ctColorCurve, ctOpacityCurve, opautili, clToningcurve, cl2Toningcurve, customToneCurve1, customToneCurve2, customToneCurvebw1, customToneCurvebw2, rrm, ggm, bbm, autor, autog, autob, params->toneCurve.expcomp, params->toneCurve.hlcompr, params->toneCurve.hlcomprthresh, dcpProf, asIn, histToneCurve);
|
||||
}
|
||||
|
||||
// Process RGB image and convert to LAB space
|
||||
void ImProcFunctions::rgbProc (Imagefloat* working, LabImage* lab, PipetteBuffer *pipetteBuffer, LUTf & hltonecurve, LUTf & shtonecurve, LUTf & tonecurve,
|
||||
SHMap* shmap, int sat, LUTf & rCurve, LUTf & gCurve, LUTf & bCurve, float satLimit, float satLimitOpacity, const ColorGradientCurve & ctColorCurve, const OpacityCurve & ctOpacityCurve, bool opautili, LUTf & clToningcurve, LUTf & cl2Toningcurve,
|
||||
int sat, LUTf & rCurve, LUTf & gCurve, LUTf & bCurve, float satLimit, float satLimitOpacity, const ColorGradientCurve & ctColorCurve, const OpacityCurve & ctOpacityCurve, bool opautili, LUTf & clToningcurve, LUTf & cl2Toningcurve,
|
||||
const ToneCurve & customToneCurve1, const ToneCurve & customToneCurve2, const ToneCurve & customToneCurvebw1, const ToneCurve & customToneCurvebw2, double &rrm, double &ggm, double &bbm, float &autor, float &autog, float &autob, double expcomp, int hlcompr, int hlcomprthresh, DCPProfile *dcpProf, const DCPProfile::ApplyState &asIn, LUTu &histToneCurve )
|
||||
{
|
||||
BENCHFUN
|
||||
@ -2040,15 +2040,6 @@ void ImProcFunctions::rgbProc (Imagefloat* working, LabImage* lab, PipetteBuffer
|
||||
}
|
||||
}
|
||||
|
||||
int h_th = 0, s_th = 0;
|
||||
|
||||
if (shmap) {
|
||||
h_th = shmap->max_f - params->sh.htonalwidth * (shmap->max_f - shmap->avg) / 100;
|
||||
s_th = params->sh.stonalwidth * (shmap->avg - shmap->min_f) / 100;
|
||||
}
|
||||
|
||||
bool processSH = params->sh.enabled && shmap && (params->sh.highlights > 0 || params->sh.shadows > 0);
|
||||
|
||||
TMatrix wprof = ICCStore::getInstance()->workingSpaceMatrix (params->icm.working);
|
||||
TMatrix wiprof = ICCStore::getInstance()->workingSpaceInverseMatrix (params->icm.working);
|
||||
|
||||
@ -2273,8 +2264,6 @@ void ImProcFunctions::rgbProc (Imagefloat* working, LabImage* lab, PipetteBuffer
|
||||
float chMixBG = float (params->chmixer.blue[1]);
|
||||
float chMixBB = float (params->chmixer.blue[2]);
|
||||
|
||||
int shHighlights = params->sh.highlights;
|
||||
int shShadows = params->sh.shadows;
|
||||
bool blackwhite = params->blackwhite.enabled;
|
||||
bool complem = params->blackwhite.enabledcc;
|
||||
float bwr = float (params->blackwhite.mixerRed);
|
||||
@ -2437,31 +2426,6 @@ void ImProcFunctions::rgbProc (Imagefloat* working, LabImage* lab, PipetteBuffer
|
||||
}
|
||||
}
|
||||
|
||||
if (processSH) {
|
||||
for (int i = istart, ti = 0; i < tH; i++, ti++) {
|
||||
for (int j = jstart, tj = 0; j < tW; j++, tj++) {
|
||||
|
||||
float r = rtemp[ti * TS + tj];
|
||||
float g = gtemp[ti * TS + tj];
|
||||
float b = btemp[ti * TS + tj];
|
||||
|
||||
|
||||
float mapval = 1.f + shmap->map[i][j];
|
||||
float factor = 1.f;
|
||||
|
||||
if (mapval > h_th) {
|
||||
factor = (h_th + (100.0 - shHighlights) * (mapval - h_th) / 100.0) / mapval;
|
||||
} else if (mapval < s_th) {
|
||||
factor = (s_th - (100.0 - shShadows) * (s_th - mapval) / 100.0) / mapval;
|
||||
}
|
||||
|
||||
rtemp[ti * TS + tj] = factor * r;
|
||||
gtemp[ti * TS + tj] = factor * g;
|
||||
btemp[ti * TS + tj] = factor * b;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
highlightToneCurve(hltonecurve, rtemp, gtemp, btemp, istart, tH, jstart, tW, TS, exp_scale, comp, hlrange);
|
||||
shadowToneCurve(shtonecurve, rtemp, gtemp, btemp, istart, tH, jstart, tW, TS);
|
||||
|
||||
@ -3647,6 +3611,8 @@ void ImProcFunctions::rgbProc (Imagefloat* working, LabImage* lab, PipetteBuffer
|
||||
delete vCurve;
|
||||
}
|
||||
|
||||
shadowsHighlights(lab);
|
||||
|
||||
if (params->localContrast.enabled) {
|
||||
// Alberto's local contrast
|
||||
localContrast(lab);
|
||||
|
||||
@ -211,10 +211,10 @@ public:
|
||||
void firstAnalysis(const Imagefloat* const working, const ProcParams ¶ms, LUTu & vhist16);
|
||||
void updateColorProfiles(const Glib::ustring& monitorProfile, RenderingIntent monitorIntent, bool softProof, bool gamutCheck);
|
||||
void rgbProc(Imagefloat* working, LabImage* lab, PipetteBuffer *pipetteBuffer, LUTf & hltonecurve, LUTf & shtonecurve, LUTf & tonecurve,
|
||||
SHMap* shmap, int sat, LUTf & rCurve, LUTf & gCurve, LUTf & bCurve, float satLimit, float satLimitOpacity, const ColorGradientCurve & ctColorCurve, const OpacityCurve & ctOpacityCurve, bool opautili, LUTf & clcurve, LUTf & cl2curve, const ToneCurve & customToneCurve1, const ToneCurve & customToneCurve2,
|
||||
int sat, LUTf & rCurve, LUTf & gCurve, LUTf & bCurve, float satLimit, float satLimitOpacity, const ColorGradientCurve & ctColorCurve, const OpacityCurve & ctOpacityCurve, bool opautili, LUTf & clcurve, LUTf & cl2curve, const ToneCurve & customToneCurve1, const ToneCurve & customToneCurve2,
|
||||
const ToneCurve & customToneCurvebw1, const ToneCurve & customToneCurvebw2, double &rrm, double &ggm, double &bbm, float &autor, float &autog, float &autob, DCPProfile *dcpProf, const DCPProfile::ApplyState &asIn, LUTu &histToneCurve);
|
||||
void rgbProc(Imagefloat* working, LabImage* lab, PipetteBuffer *pipetteBuffer, LUTf & hltonecurve, LUTf & shtonecurve, LUTf & tonecurve,
|
||||
SHMap* shmap, int sat, LUTf & rCurve, LUTf & gCurve, LUTf & bCurve, float satLimit, float satLimitOpacity, const ColorGradientCurve & ctColorCurve, const OpacityCurve & ctOpacityCurve, bool opautili, LUTf & clcurve, LUTf & cl2curve, const ToneCurve & customToneCurve1, const ToneCurve & customToneCurve2,
|
||||
int sat, LUTf & rCurve, LUTf & gCurve, LUTf & bCurve, float satLimit, float satLimitOpacity, const ColorGradientCurve & ctColorCurve, const OpacityCurve & ctOpacityCurve, bool opautili, LUTf & clcurve, LUTf & cl2curve, const ToneCurve & customToneCurve1, const ToneCurve & customToneCurve2,
|
||||
const ToneCurve & customToneCurvebw1, const ToneCurve & customToneCurvebw2, double &rrm, double &ggm, double &bbm, float &autor, float &autog, float &autob,
|
||||
double expcomp, int hlcompr, int hlcomprthresh, DCPProfile *dcpProf, const DCPProfile::ApplyState &asIn, LUTu &histToneCurve);
|
||||
void labtoning(float r, float g, float b, float &ro, float &go, float &bo, int algm, int metchrom, int twoc, float satLimit, float satLimitOpacity, const ColorGradientCurve & ctColorCurve, const OpacityCurve & ctOpacityCurve, LUTf & clToningcurve, LUTf & cl2Toningcurve, float iplow, float iphigh, double wp[3][3], double wip[3][3]);
|
||||
@ -347,6 +347,7 @@ public:
|
||||
void ToneMapFattal02(Imagefloat *rgb);
|
||||
void localContrast(LabImage *lab);
|
||||
void colorToningLabGrid(LabImage *lab, int xstart, int xend, int ystart, int yend, bool MultiThread);
|
||||
void shadowsHighlights(LabImage *lab);
|
||||
|
||||
Image8* lab2rgb(LabImage* lab, int cx, int cy, int cw, int ch, const procparams::ColorManagementParams &icm, bool consider_histogram_settings = true);
|
||||
Imagefloat* lab2rgbOut(LabImage* lab, int cx, int cy, int cw, int ch, const procparams::ColorManagementParams &icm, GammaValues *ga = nullptr);
|
||||
|
||||
146
rtengine/ipshadowshighlights.cc
Normal file
146
rtengine/ipshadowshighlights.cc
Normal file
@ -0,0 +1,146 @@
|
||||
/* -*- C++ -*-
|
||||
*
|
||||
* This file is part of RawTherapee.
|
||||
*
|
||||
* Copyright 2018 Alberto Griggio <alberto.griggio@gmail.com>
|
||||
*
|
||||
* RawTherapee is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* RawTherapee is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with RawTherapee. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "improcfun.h"
|
||||
#include "gauss.h"
|
||||
#include "sleef.c"
|
||||
#include "opthelper.h"
|
||||
|
||||
namespace rtengine {
|
||||
|
||||
void ImProcFunctions::shadowsHighlights(LabImage *lab)
|
||||
{
|
||||
if (!params->sh.enabled || (!params->sh.highlights && !params->sh.shadows)){
|
||||
return;
|
||||
}
|
||||
|
||||
const int width = lab->W;
|
||||
const int height = lab->H;
|
||||
|
||||
array2D<float> mask(width, height);
|
||||
const float sigma = params->sh.radius * 5.f / scale;
|
||||
LUTf f(32768);
|
||||
|
||||
const auto apply =
|
||||
[&](int amount, int tonalwidth, bool hl) -> void
|
||||
{
|
||||
const float thresh = tonalwidth * 327.68f;
|
||||
const float scale = hl ? (thresh > 0.f ? 0.9f / thresh : 1.f) : thresh * 0.9f;
|
||||
|
||||
#ifdef _OPENMP
|
||||
#pragma omp parallel if (multiThread)
|
||||
#endif
|
||||
{
|
||||
|
||||
#ifdef _OPENMP
|
||||
#pragma omp for
|
||||
#endif
|
||||
for (int y = 0; y < height; ++y) {
|
||||
for (int x = 0; x < width; ++x) {
|
||||
float l = lab->L[y][x];
|
||||
if (hl) {
|
||||
mask[y][x] = (l > thresh) ? 1.f : pow4(l * scale);
|
||||
} else {
|
||||
mask[y][x] = l <= thresh ? 1.f : pow4(scale / l);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
gaussianBlur(mask, mask, width, height, sigma);
|
||||
}
|
||||
|
||||
const float base = std::pow(4.f, float(amount)/100.f);
|
||||
const float gamma = hl ? base : 1.f / base;
|
||||
|
||||
const float contrast = std::pow(2.f, float(amount)/100.f);
|
||||
DiagonalCurve sh_contrast({
|
||||
DCT_NURBS,
|
||||
0, 0,
|
||||
0.125, std::pow(0.125 / 0.25, contrast) * 0.25,
|
||||
0.25, 0.25,
|
||||
0.375, std::pow(0.375 / 0.25, contrast) * 0.25,
|
||||
1, 1
|
||||
});
|
||||
|
||||
if(!hl) {
|
||||
#ifdef _OPENMP
|
||||
#pragma omp parallel for if (multiThread)
|
||||
#endif
|
||||
for (int l = 0; l < 32768; ++l) {
|
||||
auto base = pow_F(l / 32768.f, gamma);
|
||||
// get a bit more contrast in the shadows
|
||||
base = sh_contrast.getVal(base);
|
||||
f[l] = base * 32768.f;
|
||||
}
|
||||
} else {
|
||||
#ifdef __SSE2__
|
||||
vfloat c32768v = F2V(32768.f);
|
||||
vfloat lv = _mm_setr_ps(0,1,2,3);
|
||||
vfloat fourv = F2V(4.f);
|
||||
vfloat gammav = F2V(gamma);
|
||||
for (int l = 0; l < 32768; l += 4) {
|
||||
vfloat basev = pow_F(lv / c32768v, gammav);
|
||||
STVFU(f[l], basev * c32768v);
|
||||
lv += fourv;
|
||||
}
|
||||
#else
|
||||
#ifdef _OPENMP
|
||||
#pragma omp parallel for if (multiThread)
|
||||
#endif
|
||||
for (int l = 0; l < 32768; ++l) {
|
||||
auto base = pow_F(l / 32768.f, gamma);
|
||||
f[l] = base * 32768.f;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
#ifdef _OPENMP
|
||||
#pragma omp parallel for schedule(dynamic,16) if (multiThread)
|
||||
#endif
|
||||
for (int y = 0; y < height; ++y) {
|
||||
for (int x = 0; x < width; ++x) {
|
||||
float l = lab->L[y][x];
|
||||
float blend = mask[y][x];
|
||||
float orig = 1.f - blend;
|
||||
if (l >= 0.f && l < 32768.f) {
|
||||
lab->L[y][x] = f[l] * blend + l * orig;
|
||||
if (!hl && l > 1.f) {
|
||||
// when pushing shadows, scale also the chromaticity
|
||||
float s = max(lab->L[y][x] / l * 0.5f, 1.f) * blend;
|
||||
float a = lab->a[y][x];
|
||||
float b = lab->b[y][x];
|
||||
lab->a[y][x] = a * s + a * orig;
|
||||
lab->b[y][x] = b * s + b * orig;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
};
|
||||
|
||||
if (params->sh.highlights > 0) {
|
||||
apply(params->sh.highlights, params->sh.htonalwidth, true);
|
||||
}
|
||||
|
||||
if (params->sh.shadows > 0) {
|
||||
apply(params->sh.shadows, params->sh.stonalwidth, false);
|
||||
}
|
||||
}
|
||||
|
||||
} // namespace rtengine
|
||||
@ -1491,11 +1491,10 @@ bool FattalToneMappingParams::operator !=(const FattalToneMappingParams& other)
|
||||
|
||||
SHParams::SHParams() :
|
||||
enabled(false),
|
||||
hq(false),
|
||||
highlights(0),
|
||||
htonalwidth(80),
|
||||
htonalwidth(70),
|
||||
shadows(0),
|
||||
stonalwidth(80),
|
||||
stonalwidth(30),
|
||||
radius(40)
|
||||
{
|
||||
}
|
||||
@ -1504,7 +1503,6 @@ bool SHParams::operator ==(const SHParams& other) const
|
||||
{
|
||||
return
|
||||
enabled == other.enabled
|
||||
&& hq == other.hq
|
||||
&& highlights == other.highlights
|
||||
&& htonalwidth == other.htonalwidth
|
||||
&& shadows == other.shadows
|
||||
@ -3047,7 +3045,6 @@ int ProcParams::save(const Glib::ustring& fname, const Glib::ustring& fname2, bo
|
||||
|
||||
// Shadows & highlights
|
||||
saveToKeyfile(!pedited || pedited->sh.enabled, "Shadows & Highlights", "Enabled", sh.enabled, keyFile);
|
||||
saveToKeyfile(!pedited || pedited->sh.hq, "Shadows & Highlights", "HighQuality", sh.hq, keyFile);
|
||||
saveToKeyfile(!pedited || pedited->sh.highlights, "Shadows & Highlights", "Highlights", sh.highlights, keyFile);
|
||||
saveToKeyfile(!pedited || pedited->sh.htonalwidth, "Shadows & Highlights", "HighlightTonalWidth", sh.htonalwidth, keyFile);
|
||||
saveToKeyfile(!pedited || pedited->sh.shadows, "Shadows & Highlights", "Shadows", sh.shadows, keyFile);
|
||||
@ -3946,9 +3943,8 @@ int ProcParams::load(const Glib::ustring& fname, ParamsEdited* pedited)
|
||||
assignFromKeyfile(keyFile, "FattalToneMapping", "Anchor", pedited, fattal.anchor, pedited->fattal.anchor);
|
||||
}
|
||||
|
||||
if (keyFile.has_group("Shadows & Highlights")) {
|
||||
if (keyFile.has_group ("Shadows & Highlights") && ppVersion >= 333) {
|
||||
assignFromKeyfile(keyFile, "Shadows & Highlights", "Enabled", pedited, sh.enabled, pedited->sh.enabled);
|
||||
assignFromKeyfile(keyFile, "Shadows & Highlights", "HighQuality", pedited, sh.hq, pedited->sh.hq);
|
||||
assignFromKeyfile(keyFile, "Shadows & Highlights", "Highlights", pedited, sh.highlights, pedited->sh.highlights);
|
||||
assignFromKeyfile(keyFile, "Shadows & Highlights", "HighlightTonalWidth", pedited, sh.htonalwidth, pedited->sh.htonalwidth);
|
||||
assignFromKeyfile(keyFile, "Shadows & Highlights", "Shadows", pedited, sh.shadows, pedited->sh.shadows);
|
||||
@ -3957,7 +3953,7 @@ int ProcParams::load(const Glib::ustring& fname, ParamsEdited* pedited)
|
||||
|
||||
if (keyFile.has_key("Shadows & Highlights", "LocalContrast") && ppVersion < 329) {
|
||||
int lc = keyFile.get_integer("Shadows & Highlights", "LocalContrast");
|
||||
localContrast.amount = float(lc) / (sh.hq ? 500.0 : 30.);
|
||||
localContrast.amount = float(lc) / 30.;
|
||||
|
||||
if (pedited) {
|
||||
pedited->localContrast.amount = true;
|
||||
|
||||
@ -740,7 +740,6 @@ struct FattalToneMappingParams {
|
||||
*/
|
||||
struct SHParams {
|
||||
bool enabled;
|
||||
bool hq;
|
||||
int highlights;
|
||||
int htonalwidth;
|
||||
int shadows;
|
||||
|
||||
@ -38,6 +38,12 @@ constexpr T SQR(T x)
|
||||
return x * x;
|
||||
}
|
||||
|
||||
template<typename T>
|
||||
constexpr T pow4(T x)
|
||||
{
|
||||
return SQR(SQR(x));
|
||||
}
|
||||
|
||||
template<typename T>
|
||||
constexpr const T& min(const T& a)
|
||||
{
|
||||
|
||||
@ -1184,21 +1184,6 @@ IImage8* Thumbnail::processImage (const procparams::ProcParams& params, eSensorT
|
||||
baseImg = trImg;
|
||||
}
|
||||
|
||||
// update blurmap
|
||||
SHMap* shmap = nullptr;
|
||||
|
||||
if (params.sh.enabled) {
|
||||
shmap = new SHMap (fw, fh, false);
|
||||
double radius = sqrt (double (fw * fw + fh * fh)) / 2.0;
|
||||
double shradius = params.sh.radius;
|
||||
|
||||
if (!params.sh.hq) {
|
||||
shradius *= radius / 1800.0;
|
||||
}
|
||||
|
||||
shmap->update (baseImg, shradius, ipf.lumimul, params.sh.hq, 16);
|
||||
}
|
||||
|
||||
// RGB processing
|
||||
double expcomp = params.toneCurve.expcomp;
|
||||
int bright = params.toneCurve.brightness;
|
||||
@ -1308,7 +1293,7 @@ IImage8* Thumbnail::processImage (const procparams::ProcParams& params, eSensorT
|
||||
}
|
||||
|
||||
LUTu histToneCurve;
|
||||
ipf.rgbProc (baseImg, labView, nullptr, curve1, curve2, curve, shmap, params.toneCurve.saturation, rCurve, gCurve, bCurve, satLimit, satLimitOpacity, ctColorCurve, ctOpacityCurve, opautili, clToningcurve, cl2Toningcurve, customToneCurve1, customToneCurve2, customToneCurvebw1, customToneCurvebw2, rrm, ggm, bbm, autor, autog, autob, expcomp, hlcompr, hlcomprthresh, dcpProf, as, histToneCurve);
|
||||
ipf.rgbProc (baseImg, labView, nullptr, curve1, curve2, curve, params.toneCurve.saturation, rCurve, gCurve, bCurve, satLimit, satLimitOpacity, ctColorCurve, ctOpacityCurve, opautili, clToningcurve, cl2Toningcurve, customToneCurve1, customToneCurve2, customToneCurvebw1, customToneCurvebw2, rrm, ggm, bbm, autor, autog, autob, expcomp, hlcompr, hlcomprthresh, dcpProf, as, histToneCurve);
|
||||
|
||||
// freeing up some memory
|
||||
customToneCurve1.Reset();
|
||||
@ -1318,10 +1303,6 @@ IImage8* Thumbnail::processImage (const procparams::ProcParams& params, eSensorT
|
||||
customToneCurvebw1.Reset();
|
||||
customToneCurvebw2.Reset();
|
||||
|
||||
if (shmap) {
|
||||
delete shmap;
|
||||
}
|
||||
|
||||
// luminance histogram update
|
||||
if (params.labCurve.contrast != 0) {
|
||||
hist16.clear();
|
||||
|
||||
@ -881,21 +881,6 @@ private:
|
||||
ipf.lab2rgb (labcbdl, *baseImg, params.icm.working);
|
||||
}
|
||||
|
||||
// update blurmap
|
||||
SHMap* shmap = nullptr;
|
||||
|
||||
if (params.sh.enabled) {
|
||||
shmap = new SHMap (fw, fh, true);
|
||||
double radius = sqrt (double (fw * fw + fh * fh)) / 2.0;
|
||||
double shradius = params.sh.radius;
|
||||
|
||||
if (!params.sh.hq) {
|
||||
shradius *= radius / 1800.0;
|
||||
}
|
||||
|
||||
shmap->update (baseImg, shradius, ipf.lumimul, params.sh.hq, 1);
|
||||
}
|
||||
|
||||
|
||||
//gamma TRC working
|
||||
{
|
||||
@ -1020,7 +1005,7 @@ private:
|
||||
|
||||
LUTu histToneCurve;
|
||||
|
||||
ipf.rgbProc (baseImg, labView, nullptr, curve1, curve2, curve, shmap, params.toneCurve.saturation, rCurve, gCurve, bCurve, satLimit, satLimitOpacity, ctColorCurve, ctOpacityCurve, opautili, clToningcurve, cl2Toningcurve, customToneCurve1, customToneCurve2, customToneCurvebw1, customToneCurvebw2, rrm, ggm, bbm, autor, autog, autob, expcomp, hlcompr, hlcomprthresh, dcpProf, as, histToneCurve);
|
||||
ipf.rgbProc (baseImg, labView, nullptr, curve1, curve2, curve, params.toneCurve.saturation, rCurve, gCurve, bCurve, satLimit, satLimitOpacity, ctColorCurve, ctOpacityCurve, opautili, clToningcurve, cl2Toningcurve, customToneCurve1, customToneCurve2, customToneCurvebw1, customToneCurvebw2, rrm, ggm, bbm, autor, autog, autob, expcomp, hlcompr, hlcomprthresh, dcpProf, as, histToneCurve);
|
||||
|
||||
if (settings->verbose) {
|
||||
printf ("Output image / Auto B&W coefs: R=%.2f G=%.2f B=%.2f\n", autor, autog, autob);
|
||||
@ -1045,12 +1030,6 @@ private:
|
||||
delete baseImg;
|
||||
baseImg = nullptr;
|
||||
|
||||
if (shmap) {
|
||||
delete shmap;
|
||||
}
|
||||
|
||||
shmap = nullptr;
|
||||
|
||||
if (pl) {
|
||||
pl->setProgress (0.55);
|
||||
}
|
||||
|
||||
@ -51,7 +51,6 @@ ExportPanel::ExportPanel () : listener (nullptr)
|
||||
//bypass_colorDenoise = Gtk::manage ( new Gtk::CheckButton (M("EXPORT_BYPASS_COLORDENOISE")));
|
||||
bypass_defringe = Gtk::manage ( new Gtk::CheckButton (M ("EXPORT_BYPASS_DEFRINGE")));
|
||||
bypass_dirpyrDenoise = Gtk::manage ( new Gtk::CheckButton (M ("EXPORT_BYPASS_DIRPYRDENOISE")));
|
||||
bypass_sh_hq = Gtk::manage ( new Gtk::CheckButton (M ("EXPORT_BYPASS_SH_HQ")));
|
||||
bypass_dirpyrequalizer = Gtk::manage ( new Gtk::CheckButton (M ("EXPORT_BYPASS_DIRPYREQUALIZER")));
|
||||
bypass_wavelet = Gtk::manage ( new Gtk::CheckButton (M ("EXPORT_BYPASS_EQUALIZER")));
|
||||
bypass_raw_ccSteps = Gtk::manage ( new Gtk::CheckButton (M ("EXPORT_BYPASS_RAW_CCSTEPS")));
|
||||
@ -120,7 +119,6 @@ ExportPanel::ExportPanel () : listener (nullptr)
|
||||
//pack_start(*bypass_colorDenoise , Gtk::PACK_SHRINK, 4);
|
||||
bypass_box->pack_start (*bypass_defringe, Gtk::PACK_SHRINK, 4);
|
||||
bypass_box->pack_start (*bypass_dirpyrDenoise, Gtk::PACK_SHRINK, 4);
|
||||
bypass_box->pack_start (*bypass_sh_hq, Gtk::PACK_SHRINK, 4);
|
||||
bypass_box->pack_start (*bypass_dirpyrequalizer, Gtk::PACK_SHRINK, 4);
|
||||
bypass_box->pack_start (*bypass_wavelet, Gtk::PACK_SHRINK, 4);
|
||||
|
||||
@ -206,7 +204,6 @@ ExportPanel::ExportPanel () : listener (nullptr)
|
||||
//bypass_colorDenoiseConn = bypass_colorDenoise->signal_toggled().connect (sigc::bind (sigc::mem_fun(*bypass_ALL, &Gtk::CheckButton::set_inconsistent), true));
|
||||
bypass_defringeConn = bypass_defringe->signal_toggled().connect (sigc::bind (sigc::mem_fun (*bypass_ALL, &Gtk::CheckButton::set_inconsistent), true));
|
||||
bypass_dirpyrDenoiseConn = bypass_dirpyrDenoise->signal_toggled().connect (sigc::bind (sigc::mem_fun (*bypass_ALL, &Gtk::CheckButton::set_inconsistent), true));
|
||||
bypass_sh_hqConn = bypass_sh_hq->signal_toggled().connect (sigc::bind (sigc::mem_fun (*bypass_ALL, &Gtk::CheckButton::set_inconsistent), true));
|
||||
bypass_dirpyrequalizerConn = bypass_dirpyrequalizer->signal_toggled().connect (sigc::bind (sigc::mem_fun (*bypass_ALL, &Gtk::CheckButton::set_inconsistent), true));
|
||||
bypass_waveletConn = bypass_wavelet->signal_toggled().connect (sigc::bind (sigc::mem_fun (*bypass_ALL, &Gtk::CheckButton::set_inconsistent), true));
|
||||
//bypass_raw_all_enhanceConn = bypass_raw_bayer_all_enhance->signal_toggled().connect (sigc::bind (sigc::mem_fun(*bypass_ALL, &Gtk::CheckButton::set_inconsistent), true));
|
||||
@ -258,7 +255,6 @@ void ExportPanel::SaveSettingsAsDefault()
|
||||
//options.fastexport_bypass_colorDenoise = bypass_colorDenoise->get_active ();
|
||||
FE_OPT_STORE_ (options.fastexport_bypass_defringe, bypass_defringe->get_active ());
|
||||
FE_OPT_STORE_ (options.fastexport_bypass_dirpyrDenoise, bypass_dirpyrDenoise->get_active ());
|
||||
FE_OPT_STORE_ (options.fastexport_bypass_sh_hq, bypass_sh_hq->get_active ());
|
||||
FE_OPT_STORE_ (options.fastexport_bypass_dirpyrequalizer, bypass_dirpyrequalizer->get_active ());
|
||||
FE_OPT_STORE_ (options.fastexport_bypass_wavelet, bypass_wavelet->get_active ());
|
||||
//options.fastexport_bypass_raw_bayer_all_enhance = bypass_raw_all_enhance->get_active ();
|
||||
@ -322,7 +318,6 @@ void ExportPanel::LoadDefaultSettings()
|
||||
//bypass_colorDenoise->set_active (options.fastexport_bypass_colorDenoise );
|
||||
bypass_defringe->set_active (options.fastexport_bypass_defringe );
|
||||
bypass_dirpyrDenoise->set_active (options.fastexport_bypass_dirpyrDenoise );
|
||||
bypass_sh_hq->set_active (options.fastexport_bypass_sh_hq );
|
||||
bypass_dirpyrequalizer->set_active (options.fastexport_bypass_dirpyrequalizer );
|
||||
bypass_wavelet->set_active (options.fastexport_bypass_wavelet );
|
||||
//bypass_raw_bayer_all_enhance->set_active (options.fastexport_bypass_raw_bayer_all_enhance );
|
||||
@ -394,7 +389,6 @@ void ExportPanel::bypassALL_Toggled()
|
||||
//bypass_colorDenoiseConn.block (true);
|
||||
bypass_defringeConn.block (true);
|
||||
bypass_dirpyrDenoiseConn.block (true);
|
||||
bypass_sh_hqConn.block (true);
|
||||
bypass_dirpyrequalizerConn.block (true);
|
||||
bypass_waveletConn.block (true);
|
||||
//bypass_raw_bayer_all_enhanceConn.block (true);
|
||||
@ -417,7 +411,6 @@ void ExportPanel::bypassALL_Toggled()
|
||||
//bypass_colorDenoise->set_active(bypass_ALL->get_active());
|
||||
bypass_defringe->set_active (bypass_ALL->get_active());
|
||||
bypass_dirpyrDenoise->set_active (bypass_ALL->get_active());
|
||||
bypass_sh_hq->set_active (bypass_ALL->get_active());
|
||||
bypass_dirpyrequalizer->set_active (bypass_ALL->get_active());
|
||||
bypass_wavelet->set_active (bypass_ALL->get_active());
|
||||
//bypass_raw_bayer_all_enhance->set_active(bypass_ALL->get_active());
|
||||
@ -438,7 +431,6 @@ void ExportPanel::bypassALL_Toggled()
|
||||
//bypass_colorDenoiseConn.block (false);
|
||||
bypass_defringeConn.block (false);
|
||||
bypass_dirpyrDenoiseConn.block (false);
|
||||
bypass_sh_hqConn.block (false);
|
||||
bypass_dirpyrequalizerConn.block (false);
|
||||
bypass_waveletConn.block (false);
|
||||
//bypass_raw_bayer_all_enhanceConn.block (false);
|
||||
@ -466,7 +458,6 @@ fastexport_bypass_lumaDenoise
|
||||
fastexport_bypass_colorDenoise
|
||||
fastexport_bypass_defringe
|
||||
fastexport_bypass_dirpyrDenoise
|
||||
fastexport_bypass_sh_hq
|
||||
fastexport_bypass_dirpyrequalizer
|
||||
fastexport_raw_bayer_method
|
||||
fastexport_bypass_raw_bayer_all_enhance
|
||||
|
||||
@ -48,7 +48,6 @@ protected:
|
||||
//Gtk::CheckButton* bypass_colorDenoise;
|
||||
Gtk::CheckButton* bypass_defringe;
|
||||
Gtk::CheckButton* bypass_dirpyrDenoise;
|
||||
Gtk::CheckButton* bypass_sh_hq;
|
||||
|
||||
/* icm_input = "(camera)";
|
||||
icm_working = "sRGB";
|
||||
@ -88,7 +87,6 @@ protected:
|
||||
//sigc::connection bypass_colorDenoiseConn ;
|
||||
sigc::connection bypass_defringeConn ;
|
||||
sigc::connection bypass_dirpyrDenoiseConn ;
|
||||
sigc::connection bypass_sh_hqConn ;
|
||||
sigc::connection bypass_dirpyrequalizerConn ;
|
||||
sigc::connection bypass_waveletConn ;
|
||||
//sigc::connection bypass_raw_bayer_all_enhanceConn ;
|
||||
|
||||
@ -1129,10 +1129,6 @@ void FileCatalog::developRequested (std::vector<FileBrowserEntry*> tbe, bool fas
|
||||
params.dirpyrDenoise.enabled = false;
|
||||
}
|
||||
|
||||
if (options.fastexport_bypass_sh_hq) {
|
||||
params.sh.hq = false;
|
||||
}
|
||||
|
||||
if (options.fastexport_bypass_dirpyrequalizer) {
|
||||
params.dirpyrequalizer.enabled = false;
|
||||
}
|
||||
|
||||
@ -447,7 +447,6 @@ void Options::setDefaults()
|
||||
//fastexport_bypass_colorDenoise = true;
|
||||
fastexport_bypass_defringe = true;
|
||||
fastexport_bypass_dirpyrDenoise = true;
|
||||
fastexport_bypass_sh_hq = true;
|
||||
fastexport_bypass_dirpyrequalizer = true;
|
||||
fastexport_bypass_wavelet = true;
|
||||
fastexport_raw_bayer_method = "fast";
|
||||
@ -1545,10 +1544,6 @@ void Options::readFromFile(Glib::ustring fname)
|
||||
fastexport_bypass_dirpyrDenoise = keyFile.get_boolean("Fast Export", "fastexport_bypass_dirpyrDenoise");
|
||||
}
|
||||
|
||||
if (keyFile.has_key("Fast Export", "fastexport_bypass_sh_hq")) {
|
||||
fastexport_bypass_sh_hq = keyFile.get_boolean("Fast Export", "fastexport_bypass_sh_hq");
|
||||
}
|
||||
|
||||
if (keyFile.has_key("Fast Export", "fastexport_bypass_dirpyrequalizer")) {
|
||||
fastexport_bypass_dirpyrequalizer = keyFile.get_boolean("Fast Export", "fastexport_bypass_dirpyrequalizer");
|
||||
}
|
||||
@ -2024,7 +2019,6 @@ void Options::saveToFile(Glib::ustring fname)
|
||||
//keyFile.set_boolean ("Fast Export", "fastexport_bypass_colorDenoise" , fastexport_bypass_colorDenoise);
|
||||
keyFile.set_boolean("Fast Export", "fastexport_bypass_defringe", fastexport_bypass_defringe);
|
||||
keyFile.set_boolean("Fast Export", "fastexport_bypass_dirpyrDenoise", fastexport_bypass_dirpyrDenoise);
|
||||
keyFile.set_boolean("Fast Export", "fastexport_bypass_sh_hq", fastexport_bypass_sh_hq);
|
||||
keyFile.set_boolean("Fast Export", "fastexport_bypass_dirpyrequalizer", fastexport_bypass_dirpyrequalizer);
|
||||
keyFile.set_boolean("Fast Export", "fastexport_bypass_wavelet", fastexport_bypass_wavelet);
|
||||
keyFile.set_string("Fast Export", "fastexport_raw_bayer_method", fastexport_raw_bayer_method);
|
||||
|
||||
@ -295,7 +295,6 @@ public:
|
||||
//bool fastexport_bypass_colorDenoise;
|
||||
bool fastexport_bypass_defringe;
|
||||
bool fastexport_bypass_dirpyrDenoise;
|
||||
bool fastexport_bypass_sh_hq;
|
||||
bool fastexport_bypass_dirpyrequalizer;
|
||||
bool fastexport_bypass_wavelet;
|
||||
Glib::ustring fastexport_raw_bayer_method;
|
||||
|
||||
@ -283,7 +283,6 @@ void ParamsEdited::set(bool v)
|
||||
fattal.amount = v;
|
||||
fattal.anchor = v;
|
||||
sh.enabled = v;
|
||||
sh.hq = v;
|
||||
sh.highlights = v;
|
||||
sh.htonalwidth = v;
|
||||
sh.shadows = v;
|
||||
@ -844,7 +843,6 @@ void ParamsEdited::initFrom(const std::vector<rtengine::procparams::ProcParams>&
|
||||
fattal.anchor = fattal.anchor && p.fattal.anchor == other.fattal.anchor;
|
||||
|
||||
sh.enabled = sh.enabled && p.sh.enabled == other.sh.enabled;
|
||||
sh.hq = sh.hq && p.sh.hq == other.sh.hq;
|
||||
sh.highlights = sh.highlights && p.sh.highlights == other.sh.highlights;
|
||||
sh.htonalwidth = sh.htonalwidth && p.sh.htonalwidth == other.sh.htonalwidth;
|
||||
sh.shadows = sh.shadows && p.sh.shadows == other.sh.shadows;
|
||||
@ -2085,10 +2083,6 @@ void ParamsEdited::combine(rtengine::procparams::ProcParams& toEdit, const rteng
|
||||
toEdit.sh.enabled = mods.sh.enabled;
|
||||
}
|
||||
|
||||
if (sh.hq) {
|
||||
toEdit.sh.hq = mods.sh.hq;
|
||||
}
|
||||
|
||||
if (sh.highlights) {
|
||||
toEdit.sh.highlights = dontforceSet && options.baBehav[ADDSET_SH_HIGHLIGHTS] ? toEdit.sh.highlights + mods.sh.highlights : mods.sh.highlights;
|
||||
}
|
||||
|
||||
@ -1,18 +1,20 @@
|
||||
#pragma once
|
||||
|
||||
// This number has to be incremented whenever the PP3 file format is modified or the behaviour of a tool changes
|
||||
#define PPVERSION 332
|
||||
#define PPVERSION 333
|
||||
#define PPVERSION_AEXP 301 //value of PPVERSION when auto exposure algorithm was modified
|
||||
|
||||
/*
|
||||
Log of version changes
|
||||
332 2018-18-04
|
||||
333 2018-04-26
|
||||
new Shadows/Highlights tool
|
||||
332 2018-04-18
|
||||
changed pixelShiftEperIso calculation
|
||||
331 2018-14-02
|
||||
331 2018-02-14
|
||||
changed wavelet.Lmethod to int
|
||||
330 2018-20-01
|
||||
330 2018-01-20
|
||||
Added 'Auto-matched Tone Curve' button, performing histogram matching
|
||||
329 2017-12-09
|
||||
329 2017-09-12
|
||||
Added 'Enabled' flag for Channel Mixer, RGB Curves, HSV Equalizer and L*a*b* Adjustments
|
||||
328 2017-11-22
|
||||
Fix wrong type of ff_clipControl
|
||||
|
||||
@ -23,28 +23,21 @@ using namespace rtengine::procparams;
|
||||
|
||||
ShadowsHighlights::ShadowsHighlights () : FoldableToolPanel(this, "shadowshighlights", M("TP_SHADOWSHLIGHTS_LABEL"), false, true)
|
||||
{
|
||||
|
||||
hq = Gtk::manage (new Gtk::CheckButton (M("TP_SHADOWSHLIGHTS_SHARPMASK")));
|
||||
hq->set_active (false);
|
||||
pack_start (*hq);
|
||||
hqConn = hq->signal_toggled().connect( sigc::mem_fun(*this, &ShadowsHighlights::hqChanged) );
|
||||
|
||||
pack_start (*Gtk::manage (new Gtk::HSeparator()));
|
||||
highlights = Gtk::manage (new Adjuster (M("TP_SHADOWSHLIGHTS_HIGHLIGHTS"), 0, 100, 1, 0));
|
||||
h_tonalwidth = Gtk::manage (new Adjuster (M("TP_SHADOWSHLIGHTS_HLTONALW"), 10, 100, 1, 80));
|
||||
h_tonalwidth = Gtk::manage (new Adjuster (M("TP_SHADOWSHLIGHTS_HLTONALW"), 10, 100, 1, 70));
|
||||
pack_start (*highlights);
|
||||
pack_start (*h_tonalwidth);
|
||||
|
||||
pack_start (*Gtk::manage (new Gtk::HSeparator()));
|
||||
|
||||
shadows = Gtk::manage (new Adjuster (M("TP_SHADOWSHLIGHTS_SHADOWS"), 0, 100, 1, 0));
|
||||
s_tonalwidth = Gtk::manage (new Adjuster (M("TP_SHADOWSHLIGHTS_SHTONALW"), 10, 100, 1, 80));
|
||||
s_tonalwidth = Gtk::manage (new Adjuster (M("TP_SHADOWSHLIGHTS_SHTONALW"), 10, 100, 1, 30));
|
||||
pack_start (*shadows);
|
||||
pack_start (*s_tonalwidth);
|
||||
|
||||
pack_start (*Gtk::manage (new Gtk::HSeparator()));
|
||||
|
||||
radius = Gtk::manage (new Adjuster (M("TP_SHADOWSHLIGHTS_RADIUS"), 5, 100, 1, 30));
|
||||
radius = Gtk::manage (new Adjuster (M("TP_SHADOWSHLIGHTS_RADIUS"), 1, 100, 1, 40));
|
||||
pack_start (*radius);
|
||||
|
||||
radius->setAdjusterListener (this);
|
||||
@ -68,17 +61,10 @@ void ShadowsHighlights::read (const ProcParams* pp, const ParamsEdited* pedited)
|
||||
shadows->setEditedState (pedited->sh.shadows ? Edited : UnEdited);
|
||||
s_tonalwidth->setEditedState (pedited->sh.stonalwidth ? Edited : UnEdited);
|
||||
set_inconsistent (multiImage && !pedited->sh.enabled);
|
||||
hq->set_inconsistent (!pedited->sh.hq);
|
||||
}
|
||||
|
||||
setEnabled (pp->sh.enabled);
|
||||
|
||||
hqConn.block (true);
|
||||
hq->set_active (pp->sh.hq);
|
||||
hqConn.block (false);
|
||||
|
||||
lastHQ = pp->sh.hq;
|
||||
|
||||
radius->setValue (pp->sh.radius);
|
||||
highlights->setValue (pp->sh.highlights);
|
||||
h_tonalwidth->setValue (pp->sh.htonalwidth);
|
||||
@ -97,7 +83,6 @@ void ShadowsHighlights::write (ProcParams* pp, ParamsEdited* pedited)
|
||||
pp->sh.shadows = (int)shadows->getValue ();
|
||||
pp->sh.stonalwidth = (int)s_tonalwidth->getValue ();
|
||||
pp->sh.enabled = getEnabled();
|
||||
pp->sh.hq = hq->get_active();
|
||||
|
||||
if (pedited) {
|
||||
pedited->sh.radius = radius->getEditedState ();
|
||||
@ -106,7 +91,6 @@ void ShadowsHighlights::write (ProcParams* pp, ParamsEdited* pedited)
|
||||
pedited->sh.shadows = shadows->getEditedState ();
|
||||
pedited->sh.stonalwidth = s_tonalwidth->getEditedState ();
|
||||
pedited->sh.enabled = !get_inconsistent();
|
||||
pedited->sh.hq = !hq->get_inconsistent();
|
||||
}
|
||||
}
|
||||
|
||||
@ -169,31 +153,6 @@ void ShadowsHighlights::enabledChanged ()
|
||||
}
|
||||
}
|
||||
|
||||
void ShadowsHighlights::hqChanged ()
|
||||
{
|
||||
|
||||
if (batchMode) {
|
||||
if (hq->get_inconsistent()) {
|
||||
hq->set_inconsistent (false);
|
||||
hqConn.block (true);
|
||||
hq->set_active (false);
|
||||
hqConn.block (false);
|
||||
} else if (lastHQ) {
|
||||
hq->set_inconsistent (true);
|
||||
}
|
||||
|
||||
lastHQ = hq->get_active ();
|
||||
}
|
||||
|
||||
if (listener) {
|
||||
if (hq->get_active()) {
|
||||
listener->panelChanged (EvSHHighQuality, M("GENERAL_ENABLED"));
|
||||
} else {
|
||||
listener->panelChanged (EvSHHighQuality, M("GENERAL_DISABLED"));
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void ShadowsHighlights::setBatchMode (bool batchMode)
|
||||
{
|
||||
|
||||
|
||||
@ -32,9 +32,6 @@ protected:
|
||||
Adjuster* shadows;
|
||||
Adjuster* s_tonalwidth;
|
||||
Adjuster* radius;
|
||||
Gtk::CheckButton* hq;
|
||||
bool lastHQ;
|
||||
sigc::connection hqConn;
|
||||
|
||||
public:
|
||||
|
||||
@ -47,7 +44,6 @@ public:
|
||||
|
||||
void adjusterChanged (Adjuster* a, double newval);
|
||||
void enabledChanged ();
|
||||
void hqChanged ();
|
||||
|
||||
void setAdjusterBehavior (bool hadd, bool sadd);
|
||||
void trimValues (rtengine::procparams::ProcParams* pp);
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user