Local adjustments - CBDL Luminance - Recovery based on luminance mask (#6060)
* LA CBDL GUI for Recovery based on luminance mask * Improve tooltips
This commit is contained in:
@@ -1270,6 +1270,10 @@ HISTORY_MSG_1022;Local - TM recovery threshold
|
||||
HISTORY_MSG_1023;Local - TM threshold mask low
|
||||
HISTORY_MSG_1024;Local - TM threshold mask high
|
||||
HISTORY_MSG_1025;Local - TM decay
|
||||
HISTORY_MSG_1026;Local - cbdl recovery threshold
|
||||
HISTORY_MSG_1027;Local - cbdl threshold mask low
|
||||
HISTORY_MSG_1028;Local - cbdl threshold mask high
|
||||
HISTORY_MSG_1029;Local - cbdl decay
|
||||
HISTORY_MSG_BLSHAPE;Blur by level
|
||||
HISTORY_MSG_BLURCWAV;Blur chroma
|
||||
HISTORY_MSG_BLURWAV;Blur luminance
|
||||
@@ -2810,6 +2814,7 @@ TP_LOCALLAB_MASKGF_TOOLTIP;Used to direct the Guided Filter based on the image l
|
||||
TP_LOCALLAB_MASKRECOL_TOOLTIP;Used to modulate the effect of the Color and Light settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The ‘dark’ and ‘light’ areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Color and Light settings \n In between these two areas, the full value of the Color and Light settings will be applied
|
||||
TP_LOCALLAB_MASKREEXP_TOOLTIP;Used to modulate the effect of the 'Dynamic range and Exposure' settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The ‘dark’ and ‘light’ areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the 'Dynamic range and Exposure' settings \n In between these two areas, the full value of the 'Dynamic range and Exposure' settings will be applied
|
||||
TP_LOCALLAB_MASKRESH_TOOLTIP;Used to modulate the effect of the Shadows Highlights settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The ‘dark’ and ‘light’ areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Shadows Highlights settings \n In between these two areas, the full value of the Shadows Highlights settings will be applied
|
||||
TP_LOCALLAB_MASKRESCB_TOOLTIP;Used to modulate the effect of the CBDL (Luminance only) settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The ‘dark’ and ‘light’ areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the CBDL settings \n In between these two areas, the full value of the CBDL settings will be applied
|
||||
TP_LOCALLAB_MASKRESTM_TOOLTIP;Used to modulate the effect of the Tone Mapping settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The ‘dark’ and ‘light’ areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Tone Mapping settings \n In between these two areas, the full value of the Tone Mapping settings will be applied
|
||||
TP_LOCALLAB_MASKRESVIB_TOOLTIP;Used to modulate the effect of the Vibrance and Warm Cool settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The ‘dark’ and ‘light’ areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Vibrance and Warm Cool settings \n In between these two areas, the full value of the Vibrance and Warm Cool settings will be applied
|
||||
TP_LOCALLAB_MASKRESWAV_TOOLTIP;Used to modulate the effect of the Local contrast and Wavelet settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The ‘dark’ and ‘light’ areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Local contrast and Wavelet settings \n In between these two areas, the full value of the Local contrast and Wavelet settings will be applied
|
||||
@@ -2817,6 +2822,7 @@ TP_LOCALLAB_MASKRELOG_TOOLTIP;Used to modulate the effect of the Log encoding se
|
||||
TP_LOCALLAB_MASKDEINV_TOOLTIP;Reverses the way the algorithm interprets the mask.\nIf checked black and very light areas will be decreased.
|
||||
TP_LOCALLAB_MASKHIGTHRESC_TOOLTIP;Light-tone limit above which Color and Light will be restored progressively to their original values prior to being modified by the Color and Light settings .\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘structure mask’, 'Blur mask', ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’, ‘Local contrast wavelet’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
|
||||
TP_LOCALLAB_MASKHIGTHRESS_TOOLTIP;Light-tone limit above which Shadows Highlights will be restored progressively to their original values prior to being modified by the Shadows Highlights settings .\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
|
||||
TP_LOCALLAB_MASKHIGTHRESCB_TOOLTIP;Light-tone limit above which CBDL (Luminance only) will be restored progressively to their original values prior to being modified by the CBDL settings .\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
|
||||
TP_LOCALLAB_MASKHIGTHRESTM_TOOLTIP;Light-tone limit above which Tone Mapping will be restored progressively to their original values prior to being modified by the Tone Mapping settings .\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
|
||||
TP_LOCALLAB_MASKHIGTHRESVIB_TOOLTIP;Light-tone limit above which Vibrance and Warm Cool will be restored progressively to their original values prior to being modified by the Vibrance and Warm Cool settings .\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
|
||||
TP_LOCALLAB_MASKHIGTHRESWAV_TOOLTIP;Light-tone limit above which Local contrast and Wavelet will be restored progressively to their original values prior to being modified by the Local contrast and Wavelet settings .\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
|
||||
@@ -2833,6 +2839,7 @@ TP_LOCALLAB_MASKLOWTHRESC_TOOLTIP;Dark-tone limit below which Color and Light wi
|
||||
TP_LOCALLAB_MASKLOWTHRESL_TOOLTIP;Dark-tone limit below which Log encoding will be restored progressively to their original values prior to being modified by the Log encoding settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels:‘Smooth radius’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
|
||||
TP_LOCALLAB_MASKLOWTHRESE_TOOLTIP;Dark-tone limit below which 'Dynamic range and Exposure' will be restored progressively to their original values prior to being modified by the 'Dynamic range and Exposure' settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
|
||||
TP_LOCALLAB_MASKLOWTHRESS_TOOLTIP;Dark-tone limit below which Shadows Highligts will be restored progressively to their original values prior to being modified by the Shadows Highlights settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
|
||||
TP_LOCALLAB_MASKLOWTHRESCB_TOOLTIP;Dark-tone limit below which CBDL (Luminance only) will be restored progressively to their original values prior to being modified by the CBDL settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
|
||||
TP_LOCALLAB_MASKLOWTHRESTM_TOOLTIP;Dark-tone limit below which Tone Mapping will be restored progressively to their original values prior to being modified by the Tone Mapping settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
|
||||
TP_LOCALLAB_MASKLOWTHRESVIB_TOOLTIP;Dark-tone limit below which Vibrance and Warm Cool will be restored progressively to their original values prior to being modified by the Vibrance and Warm Cool settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
|
||||
TP_LOCALLAB_MASKLOWTHRESWAV_TOOLTIP;Dark-tone limit below which Local contrast and Wavelet will be restored progressively to their original values prior to being modified by the Local contrast and Wavelet settings.\n You can use certain tools in ‘Mask and modifications’ to change the gray levels: ‘Smooth radius’, ‘Gamma and slope’, ‘Contrast curve’.\n Use a ‘lockable color picker’ on the mask to see which areas will be affected. Be carefull in 'settings' to Background color mask = 0
|
||||
|
Reference in New Issue
Block a user