Deleted unused language keys

rtdata/languages/Catala

@@ -67,7 +67,6 @@ EXPORT_BYPASS_RAW_LINENOISE;Salta [raw] línia de filtre de soroll
 EXPORT_BYPASS_SHARPENEDGE;Salta afinar vores
 EXPORT_BYPASS_SHARPENING;Salta reenfocar
 EXPORT_BYPASS_SHARPENMICRO;Salta microcontrast
-EXPORT_BYPASS_SH_HQ;Salta ombres/clars intensos (alta qualitat)
 EXPORT_FASTEXPORTOPTIONS;<b>Opcions d'exportació ràpida</b>
 EXPORT_INSTRUCTIONS;Les opcions d'exportació ràpida permeten estalviar temps i recursos obviant els ajustos establerts de desenvolupament i processar la cua amb més celeritat. Es recomana aquest mètode per a una ràpida generació d'imatges de baixa resolució quan cal prioritzar la rapidesa o en canvis de tamany d'una o diverses imatges sense modificar els seus paràmetres de desenvolupament desats.
 EXPORT_MAXHEIGHT;Alçada màxima:
@@ -76,7 +75,6 @@ EXPORT_PUTTOQUEUEFAST;  Posa a la cua per a export. ràpida
 EXPORT_RAW_DMETHOD;Mètode de demosaicar
 EXTPROGTARGET_1;raw
 EXTPROGTARGET_2;cua processada
-FILEBROWSER_ADDDELTEMPLATE;Afeg/Treu plantilles...
 FILEBROWSER_APPLYPROFILE;Aplica
 FILEBROWSER_APPLYPROFILE_PARTIAL;Aplica - parcial
 FILEBROWSER_AUTODARKFRAME;Auto marc fosc
@@ -531,7 +529,6 @@ PREFERENCES_MENUGROUPLABEL;Grup "Etiqueta de color"
 PREFERENCES_MENUGROUPPROFILEOPERATIONS;Grup "Operacions de procés de perfils"
 PREFERENCES_MENUGROUPRANK;Grup "Rang"
 PREFERENCES_MENUOPTIONS;Opcions del menú
-PREFERENCES_METADATA;Metadata
 PREFERENCES_MULTITAB;Mode multitreball
 PREFERENCES_MULTITABDUALMON;Mode multitreball en segon monitor, si se'n té un
 PREFERENCES_OUTDIR;Directori de sortida
@@ -718,8 +715,6 @@ TP_HSVEQUALIZER_HUE;H
 TP_HSVEQUALIZER_LABEL;HSV Equalitzador
 TP_HSVEQUALIZER_SAT;S
 TP_HSVEQUALIZER_VAL;V
-TP_ICM_BLENDCMSMATRIX;Barreja clars intensos del perfil de color amb la matriu
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Habilita la recuperació de clars intensos quan s'usen els perfils ICC basats en LUT
 TP_ICM_INPUTCAMERA;Propi de la càmera
 TP_ICM_INPUTCAMERAICC;Perfil de color del model de càmera detectada.
 TP_ICM_INPUTCAMERAICC_TOOLTIP;Usa d'entrada el perfil de color DCP o ICC específic de càmera de RawTherapee. Aquests perfils són més precisos que els de simple matriu. Disponible per a algunes càmeres. Aquests perfils són als directoris /iccprofiles/input i /dcpprofiles i es carreguen automàticament segons un nom de fitxer que coincideix exactament amb el nom de model de la càmera.
@@ -817,7 +812,6 @@ TP_ROTATE_SELECTLINE;Selecc. línia recta
 TP_SHADOWSHLIGHTS_HIGHLIGHTS;Clars intensos
 TP_SHADOWSHLIGHTS_HLTONALW;Amplada de to per Clars I.
 TP_SHADOWSHLIGHTS_LABEL;Foscos/Clars intensos
-TP_SHADOWSHLIGHTS_LOCALCONTR;Contrast local
 TP_SHADOWSHLIGHTS_RADIUS;Radi
 TP_SHADOWSHLIGHTS_SHADOWS;Foscos
 TP_SHADOWSHLIGHTS_SHTONALW;Amplada de to per Foscos
@@ -1487,7 +1481,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !PREFERENCES_BEHADDALLHINT;Set all parameters to the <b>Add</b> mode.\nAdjustments of parameters in the batch tool panel will be <b>deltas</b> to the stored values.
 !PREFERENCES_BEHSETALL;All to 'Set'
 !PREFERENCES_BEHSETALLHINT;Set all parameters to the <b>Set</b> mode.\nAdjustments of parameters in the batch tool panel will be <b>absolute</b>, the actual values will be displayed.
-!PREFERENCES_BLACKBODY;Tungsten
 !PREFERENCES_CACHECLEAR;Clear
 !PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
 !PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
@@ -1517,34 +1510,12 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys format
 !PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
 !PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
-!PREFERENCES_D50;Settings in main menu
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_D55;5500K
-!PREFERENCES_D60;6000K
-!PREFERENCES_D65;6500K
 !PREFERENCES_DIRECTORIES;Directories
 !PREFERENCES_EDITORCMDLINE;Custom command line
 !PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_FLUOF2;Fluorescent F2
-!PREFERENCES_FLUOF7;Fluorescent F7
-!PREFERENCES_FLUOF11;Fluorescent F11
 !PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
 !PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY;Output device's Yb luminance (%)
-!PREFERENCES_GREY05;Yb=05 CIE L#30
-!PREFERENCES_GREY10;Yb=10 CIE L#40
-!PREFERENCES_GREY15;Yb=15 CIE L#45
-!PREFERENCES_GREY18;Settings in main menu
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREY23;Yb=23 CIE L#55
-!PREFERENCES_GREY30;Yb=30 CIE L#60
-!PREFERENCES_GREY40;Yb=40 CIE L#70
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
 !PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
 !PREFERENCES_INSPECT_LABEL;Inspect
 !PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
 !PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
@@ -1585,9 +1556,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
 !PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
 !PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
 !PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-!PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
 !PROFILEPANEL_GLOBALPROFILES;Bundled profiles
 !PROFILEPANEL_MODE_TIP;Processing profile fill mode.\n\nButton pressed: partial profiles will be converted to full profiles; the missing values will be replaced with hard-coded defaults.\n\nButton released: profiles will be applied as they are, altering only those values which they contain.
 !PROFILEPANEL_MYPROFILES;My profiles
@@ -1735,8 +1704,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !TP_COLORAPP_SURROUND_DIM;Dim
 !TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
 !TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\n<b>Average</b>: Average light environment (standard). The image will not change.\n\n<b>Dim</b>: Dim environment (TV). The image will become slighty dark.\n\n<b>Dark</b>: Dark environment (projector). The image will become more dark.\n\n<b>Extremly Dark</b>: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
 !TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
 !TP_COLORAPP_TCMODE_CHROMA;Chroma
 !TP_COLORAPP_TCMODE_COLORF;Colorfulness
@@ -1820,7 +1787,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !TP_DEHAZE_STRENGTH;Strength
 !TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
 !TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
 !TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
 !TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
 !TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
@@ -1837,8 +1803,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= -   High= -
 !TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2  Ty=%3
 !TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
 !TP_DIRPYRDENOISE_LABEL;Noise Reduction
 !TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
 !TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
@@ -1864,7 +1828,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
 !TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
 !TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
 !TP_DIRPYRDENOISE_TYPE_3X3;3×3
 !TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
 !TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1980,7 +1943,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !TP_RAWCACORR_AUTOIT;Iterations
 !TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
 !TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CASTR;Strength
 !TP_RAWEXPOS_BLACK_0;Green 1 (lead)
 !TP_RAWEXPOS_BLACK_1;Red
 !TP_RAWEXPOS_BLACK_2;Blue
@@ -2031,15 +1993,12 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
 !TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
 !TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
 !TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
 !TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
 !TP_RAW_PIXELSHIFTMM_AUTO;Automatic
 !TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
 !TP_RAW_PIXELSHIFTMM_OFF;Off
 !TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
 !TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
 !TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
 !TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -2074,7 +2033,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
 !TP_RETINEX_GAINTRANSMISSION;Gain transmission
 !TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
 !TP_RETINEX_GAMMA;Gamma
 !TP_RETINEX_GAMMA_FREE;Free
 !TP_RETINEX_GAMMA_HIGH;High
@@ -2141,7 +2099,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: <b>-</b>
 !TP_RGBCURVES_LUMAMODE;Luminosity mode
 !TP_RGBCURVES_LUMAMODE_TOOLTIP;<b>Luminosity mode</b> allows to vary the contribution of R, G and B channels to the luminosity of the image, without altering image color.
 !TP_SAVEDIALOG_OK_TIP;Shortcut: <b>Ctrl-Enter</b>
-!TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
 !TP_SHARPENING_BLUR;Blur radius
 !TP_SHARPENING_CONTRAST;Contrast threshold
 !TP_SHARPENMICRO_CONTRAST;Contrast threshold

rtdata/languages/Chinese (Simplified)

@@ -88,7 +88,6 @@ EXPORT_PUTTOQUEUEFAST;  放入快速导出序列
 EXPORT_RAW_DMETHOD;反拜尔算法
 EXTPROGTARGET_1;raw
 EXTPROGTARGET_2;队列已处理
-FILEBROWSER_ADDDELTEMPLATE;增加/删除模板...
 FILEBROWSER_APPLYPROFILE;应用配置
 FILEBROWSER_APPLYPROFILE_PARTIAL;应用 - 局部
 FILEBROWSER_AUTODARKFRAME;自动暗场
@@ -486,7 +485,6 @@ PREFERENCES_BATCH_PROCESSING;批处理
 PREFERENCES_BEHADDALL;全 '添加'
 PREFERENCES_BEHAVIOR;行为
 PREFERENCES_BEHSETALL;全 '设定'
-PREFERENCES_BLACKBODY;钨丝灯
 PREFERENCES_CACHEMAXENTRIES;最大缓存数量
 PREFERENCES_CACHEOPTS;缓存选项
 PREFERENCES_CACHETHUMBHEIGHT;最大缩略图高度
@@ -505,11 +503,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys format
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
 PREFERENCES_CUSTPROFBUILDPATH;可执行文件路径
-PREFERENCES_D50;5000K
-PREFERENCES_D50_OLD;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
 PREFERENCES_DARKFRAMEFOUND;找到
 PREFERENCES_DARKFRAMESHOTS;张
 PREFERENCES_DARKFRAMETEMPLATES;模板
@@ -529,32 +522,15 @@ PREFERENCES_FLATFIELDFOUND;找到
 PREFERENCES_FLATFIELDSDIR;平场图像路径
 PREFERENCES_FLATFIELDSHOTS;张
 PREFERENCES_FLATFIELDTEMPLATES;模板
-PREFERENCES_FLUOF2;Fluorescent F2
-PREFERENCES_FLUOF7;Fluorescent F7
-PREFERENCES_FLUOF11;Fluorescent F11
 PREFERENCES_FORIMAGE;用于图片文件
 PREFERENCES_FORRAW;用于Raw文件
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
 PREFERENCES_GIMPPATH;GIMP安装文件夹
-PREFERENCES_GREY;Output device's Yb luminance (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Settings in main menu
-PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;Scene Yb luminance (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;自动
 PREFERENCES_HISTOGRAMPOSITIONLEFT;直方图放置在左面板
-PREFERENCES_HISTOGRAMWORKING;使用工作色彩空间显示直方图和导航器
 PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
 PREFERENCES_HLTHRESHOLD;高光溢出阈值
 PREFERENCES_ICCDIR;ICC配置路径
-PREFERENCES_IMG_RELOAD_NEEDED;这些改变需要重载图片生效
 PREFERENCES_IMPROCPARAMS;默认图片处理参数
 PREFERENCES_INSPECT_LABEL;检阅
 PREFERENCES_INSPECT_MAXBUFFERS_LABEL;最大缓存图片数
@@ -573,7 +549,6 @@ PREFERENCES_MENUGROUPLABEL;Group "Color label"
 PREFERENCES_MENUGROUPPROFILEOPERATIONS;Group "Processing profile operations"
 PREFERENCES_MENUGROUPRANK;组 "评价"
 PREFERENCES_MENUOPTIONS;子菜单选项
-PREFERENCES_METADATA;元数据
 PREFERENCES_MONINTENT;默认渲染意图
 PREFERENCES_MONITOR;显示器
 PREFERENCES_MONPROFILE;默认色彩配置文件
@@ -641,9 +616,7 @@ PREFERENCES_TAB_IMPROC;图片处理
 PREFERENCES_TAB_SOUND;音效
 PREFERENCES_TP_LABEL;工具栏
 PREFERENCES_TP_VSCROLLBAR;隐藏垂直滚动栏
-PREFERENCES_TUNNELMETADATA;无损复制 Exif/IPTC/XMP 到输出文件
 PREFERENCES_USEBUNDLEDPROFILES;启用内置预设
-PREFERENCES_VIEW;输出设备白平衡 (显示器、电视、投影仪等)
 PREFERENCES_WORKFLOW;排版
 PROFILEPANEL_LABEL;处理参数配置
 PROFILEPANEL_LOADDLGLABEL;加载处理参数为...
@@ -895,10 +868,8 @@ TP_SAVEDIALOG_OK_TIP;快捷键: <b>Ctrl-Enter</b>
 TP_SHADOWSHLIGHTS_HIGHLIGHTS;高光
 TP_SHADOWSHLIGHTS_HLTONALW;影调范围
 TP_SHADOWSHLIGHTS_LABEL;阴影/高光
-TP_SHADOWSHLIGHTS_LOCALCONTR;局部对比度
 TP_SHADOWSHLIGHTS_RADIUS;半径
 TP_SHADOWSHLIGHTS_SHADOWS;阴影
-TP_SHADOWSHLIGHTS_SHARPMASK;锐度蒙板
 TP_SHADOWSHLIGHTS_SHTONALW;影调范围
 TP_SHARPENEDGE_AMOUNT;数量
 TP_SHARPENEDGE_LABEL;边缘
@@ -981,7 +952,6 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: <b>-</b>
 !EXPORT_BYPASS_RAW_DCB_ENHANCE;Bypass [raw] DCB Enhancement Steps
 !EXPORT_BYPASS_RAW_DCB_ITERATIONS;Bypass [raw] DCB Iterations
 !EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Bypass [raw] LMMSE Enhancement Steps
-!EXPORT_BYPASS_SH_HQ;Bypass Sharp Mask Shadows/Highlights
 !EXPORT_INSTRUCTIONS;Fast Export options provide overrides to bypass time and resource consuming development settings and to run queue processing using the fast export settings instead. This method is recommended for quicker generation of lower resolution images when speed is a priority or when resized output is desired for one or many images without making modifications to their saved development parameters.
 !EXPORT_PIPELINE;Processing pipeline
 !EXPORT_USE_FAST_PIPELINE;Dedicated (full processing on resized image)
@@ -1685,8 +1655,6 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: <b>-</b>
 !TP_COLORAPP_SURROUND;Surround
 !TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
 !TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\n<b>Average</b>: Average light environment (standard). The image will not change.\n\n<b>Dim</b>: Dim environment (TV). The image will become slighty dark.\n\n<b>Dark</b>: Dark environment (projector). The image will become more dark.\n\n<b>Extremly Dark</b>: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
 !TP_COLORAPP_TCMODE_CHROMA;Chroma
 !TP_COLORAPP_TCMODE_COLORF;Colorfulness
 !TP_COLORAPP_TCMODE_LABEL1;Curve mode 1
@@ -1765,7 +1733,6 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: <b>-</b>
 !TP_DEHAZE_STRENGTH;Strength
 !TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
 !TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
 !TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
 !TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
 !TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
@@ -1783,8 +1750,6 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: <b>-</b>
 !TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= -   High= -
 !TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2  Ty=%3
 !TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
 !TP_DIRPYRDENOISE_LABEL;Noise Reduction
 !TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
 !TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
@@ -1810,7 +1775,6 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: <b>-</b>
 !TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
 !TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
 !TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
 !TP_DIRPYRDENOISE_TYPE_3X3;3×3
 !TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
 !TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1851,8 +1815,6 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: <b>-</b>
 !TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
 !TP_ICM_APPLYLOOKTABLE;Look table
 !TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-!TP_ICM_BLENDCMSMATRIX;Blend ICC highlights with matrix
-!TP_ICM_BLENDCMSMATRIX_TOOLTIP;Enable to recover clipped highlights when using LUT-based ICC profiles.
 !TP_ICM_BPC;Black Point Compensation
 !TP_ICM_DCPILLUMINANT;Illuminant
 !TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
@@ -1943,7 +1905,6 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: <b>-</b>
 !TP_RAWCACORR_AUTOIT;Iterations
 !TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
 !TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CASTR;Strength
 !TP_RAWEXPOS_BLACKS;Black Levels
 !TP_RAWEXPOS_BLACK_0;Green 1 (lead)
 !TP_RAWEXPOS_BLACK_1;Red
@@ -2002,15 +1963,12 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: <b>-</b>
 !TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
 !TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
 !TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
 !TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
 !TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
 !TP_RAW_PIXELSHIFTMM_AUTO;Automatic
 !TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
 !TP_RAW_PIXELSHIFTMM_OFF;Off
 !TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
 !TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
 !TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
 !TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -2046,7 +2004,6 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: <b>-</b>
 !TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
 !TP_RETINEX_GAINTRANSMISSION;Gain transmission
 !TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
 !TP_RETINEX_GAMMA;Gamma
 !TP_RETINEX_GAMMA_FREE;Free
 !TP_RETINEX_GAMMA_HIGH;High

rtdata/languages/Czech

@@ -140,7 +140,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Vynechat [raw] kroky vylepšení LMMSE
 EXPORT_BYPASS_SHARPENEDGE;Vynechat doostření hran
 EXPORT_BYPASS_SHARPENING;Vynechat doostření
 EXPORT_BYPASS_SHARPENMICRO;Vynechat mikrokontrast
-EXPORT_BYPASS_SH_HQ;Vynechat masku ostrosti stínů a světel
 EXPORT_FASTEXPORTOPTIONS;<b>Volby rychlého exportu</b>
 EXPORT_INSTRUCTIONS;Volba rychlého exportu umožňuje potlačit vybrané nastavení procesu vyvolání a zkrátit tak čas a zdroje potřebné pro zpracování fronty tím, že se pro vyvolání použije nastavení rychlého exportu. Tato metoda je doporučována pro rychlejší vyvolání obrázků v nižším rozlišení v případě, že je důležitá rychlost, nebo pokud je požadováno vyvolání jednoho nebo více obrázků v nižším rozlišení bez změny uložených parametrů vyvolání.
 EXPORT_MAXHEIGHT;Maximální výška:
@@ -153,7 +152,6 @@ EXPORT_USE_FAST_PIPELINE_TIP;Použije vyhrazenou frontu zpracování v režimu r
 EXPORT_USE_NORMAL_PIPELINE;Standardní (přeskočí některé kroky, zmenší až na konci)
 EXTPROGTARGET_1;raw
 EXTPROGTARGET_2;Zpracování fronty
-FILEBROWSER_ADDDELTEMPLATE;Přidat/Smazat šablony...
 FILEBROWSER_APPLYPROFILE;Použít
 FILEBROWSER_APPLYPROFILE_PARTIAL;Aplikovat - částečně
 FILEBROWSER_AUTODARKFRAME;Automatický tmavý snímek
@@ -1091,7 +1089,6 @@ PREFERENCES_BEHADDALLHINT;Nastaví všechny parametry do módu <b>Přidat</b>.\n
 PREFERENCES_BEHAVIOR;Režim
 PREFERENCES_BEHSETALL;Vše do 'Nastavit'
 PREFERENCES_BEHSETALLHINT;Nastaví všechny parametry do módu <b>Nastavit</b>.\nZměna parametrů v panelu dávkového zpracování se aplikuje jako <b>absolutní</b>, budou zobrazeny aktuální hodnoty.
-PREFERENCES_BLACKBODY;Wolfram
 PREFERENCES_CACHECLEAR;Smazat
 PREFERENCES_CACHECLEAR_ALL;Smazat z mezipaměti všechny soubory :
 PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Smazat z mezipaměti všechny soubory mimo profilů zpracování:
@@ -1122,11 +1119,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Formát klíče
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Jméno
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
 PREFERENCES_CUSTPROFBUILDPATH;Cesta k programu
-PREFERENCES_D50;Nastavení v hlavní nabídce
-PREFERENCES_D50_OLD;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
 PREFERENCES_DARKFRAMEFOUND;Nalezeno
 PREFERENCES_DARKFRAMESHOTS;snímků
 PREFERENCES_DARKFRAMETEMPLATES;šablony
@@ -1149,32 +1141,15 @@ PREFERENCES_FLATFIELDFOUND;Nalezeno
 PREFERENCES_FLATFIELDSDIR;Složka Flat Field souborů
 PREFERENCES_FLATFIELDSHOTS;snímků
 PREFERENCES_FLATFIELDTEMPLATES;šablony
-PREFERENCES_FLUOF2;Fluorescenční F2
-PREFERENCES_FLUOF7;Fluorescenční F7
-PREFERENCES_FLUOF11;Fluorescenční F11
 PREFERENCES_FORIMAGE;Pro ostatní fotografie
 PREFERENCES_FORRAW;Pro raw fotografie
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Stejná velikost náhledu ve filmovém pásu a v Prohlížeči souborů
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Rozdílné velikosti náhledů znamenají delší dobu zpracování při přepínání mezi obrázkem v záložce Editoru a Prohlížečem souborů.
 PREFERENCES_GIMPPATH;GIMP instalační složka
-PREFERENCES_GREY;Yb svítivost výstupního zařízení (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Nastavení v hlavní nabídce
-PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;Yb svítivost scény (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;Automaticky
 PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram v levém panelu
-PREFERENCES_HISTOGRAMWORKING;Navigátor a hlavní histogram používají pracovní profil
 PREFERENCES_HISTOGRAM_TOOLTIP;Pokud je povoleno, používá se pracovní profil pro vykreslení hlavního histogramu a v navigačním panelu. V opačném případě je použit výstupní profil s aplikovanou gama korekcí.
 PREFERENCES_HLTHRESHOLD;Práh oříznutých světel
 PREFERENCES_ICCDIR;Složka obsahující barevné profily
-PREFERENCES_IMG_RELOAD_NEEDED;Tyto změny se projeví až po novém načtení již otevřeného obrázku (nebo po otevření nového obrázku)
 PREFERENCES_IMPROCPARAMS;Výchozí profil zpracování
 PREFERENCES_INSPECT_LABEL;Prohlížení
 PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximální počet obrázků v mezipaměti
@@ -1193,7 +1168,6 @@ PREFERENCES_MENUGROUPLABEL;Skupina "Barevné štítky"
 PREFERENCES_MENUGROUPPROFILEOPERATIONS;Skupina "Operace s profily zpracování"
 PREFERENCES_MENUGROUPRANK;Skupina "Hodnocení"
 PREFERENCES_MENUOPTIONS;Volby místní nabídky
-PREFERENCES_METADATA;Metadata
 PREFERENCES_MONINTENT;Výchozí reprodukční záměr
 PREFERENCES_MONITOR;Monitor
 PREFERENCES_MONPROFILE;Výchozí barevný profil
@@ -1269,9 +1243,7 @@ PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutrální vykreslení RAW
 PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Vložený JPEG náhled pokud je v plné velikosti, jinak neutrální raw
 PREFERENCES_TP_LABEL;Panel nástrojů:
 PREFERENCES_TP_VSCROLLBAR;Skrýt svislou posuvnou lištu
-PREFERENCES_TUNNELMETADATA;Zkopírovat nezměněná Exif/IPTC/XMP metadata do výstupního souboru
 PREFERENCES_USEBUNDLEDPROFILES;Použít přiložené profily
-PREFERENCES_VIEW;Nastavení vyvážení bílé výstupních zařízení (monitor, TV, projektor, rámeček a jiné)
 PREFERENCES_WORKFLOW;Rozvržení
 PROFILEPANEL_COPYPPASTE;Parametry pro kopírování
 PROFILEPANEL_GLOBALPROFILES;Přiložené profily
@@ -1480,8 +1452,6 @@ TP_COLORAPP_SURROUND_DARK;Tmavé
 TP_COLORAPP_SURROUND_DIM;Tlumené
 TP_COLORAPP_SURROUND_EXDARK;Velmi tmavé
 TP_COLORAPP_SURROUND_TOOLTIP;Změní tóny a barvy dle podmínek prohlížení na výstupním zařízení\n\n<b>Průměrné</b>: Průměrné osvětlení prostředí (standardní). Obrázek nebude změněn.\n\n<b>Tlumené</b>: Tlumené prostředí (TV). Obrázek bude mírně ztmaven.\n\n<b>Tmavé</b>: Tmavé prostředí (projektor). Obrázek bude více tmavý.\n\n<b>Velmi tmavé</b>: Velmi tmavé prostředí (cutsheet). Obrázek bude velmi tmavý.
-TP_COLORAPP_SURSOURCE;Tmavé okolí
-TP_COLORAPP_SURSOURCE_TOOLTIP;Může být použito, pokud má vstupní obrázek tmavý okraj.
 TP_COLORAPP_TCMODE_BRIGHTNESS;Jas
 TP_COLORAPP_TCMODE_CHROMA;Barevnost
 TP_COLORAPP_TCMODE_COLORF;Pestrobarevnost
@@ -1582,7 +1552,6 @@ TP_DEHAZE_SHOW_DEPTH_MAP;Ukázat hloubkovou mapu
 TP_DEHAZE_STRENGTH;Síla
 TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Více zónová automatika
 TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatická celková
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Zkusí odhadnout barevný šum\nPozor, tento výpočet je zprůměrován a zcela subjektivní!
 TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Barevnost - Modrá a žlutá
 TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Křivka barevnosti
 TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Zvýší (násobí) hodnoty všech barevných posuvníků.\nKřivka vám umožní nastavit sílu redukce barevného šumu jako funkci barvy. Například pro zvýšení účinku v oblastech s nízkým nasycení a snížení v oblastech s vysokým nasycením.
@@ -1600,8 +1569,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Náhled šumu: Průměr=%1  Výš
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Náhled šumu: Průměr= -   Výšky= -
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Velikost dlaždice=%1, Střed: Tx=%2  Ty=%3
 TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Barevnost - Červená a zelená
-TP_DIRPYRDENOISE_ENH;Vylepšený režim
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Zvýší kvalitu odstranění šumu, ale zároveň prodlouží dobu zpracování o 20%.
 TP_DIRPYRDENOISE_LABEL;Redukce šumu
 TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Ovládání jasu
 TP_DIRPYRDENOISE_LUMINANCE_CURVE;Křivka jasů
@@ -1630,7 +1597,6 @@ TP_DIRPYRDENOISE_MEDIAN_PASSES;Počet průchodů mediánu
 TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Aplikování tří průchodů  filtru medián s oknem 3×3 často vede k lepšímu výsledku než jednou aplikovaný filtr medián s oknem 7×7.
 TP_DIRPYRDENOISE_MEDIAN_TYPE;Typ mediánu
 TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Aplikuje filtr medián požadované velikosti okna. Čím větší velikost okna, tím déle bude zpracování trvat.\n\n3×3 jemný: upraví 5 pixelů v okně 3x3 pixely.\n3×3: upraví 9 pixelů v okně 3x3 pixely.\n5×5 jemný; upraví 13 pixelů v okně 5x5 pixelů.\n5×5: upraví 25 pixelů v okně 5x5 pixelů.\n7×7: upraví 49 pixelů v okně 7x7 pixelů.\n9×9: upraví 81 pixelů v okně 9x9 pixelů.\n\nV některých případech může být větší kvality dosaženo pomocí několika průběhů s menšími okny než jedním průběhem s velkým oknem.
-TP_DIRPYRDENOISE_SLI;Posuvník
 TP_DIRPYRDENOISE_TYPE_3X3;3×3
 TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 jemný
 TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1735,8 +1701,6 @@ TP_ICM_APPLYHUESATMAP;Základní tabulka
 TP_ICM_APPLYHUESATMAP_TOOLTIP;Použije vloženou DCP základní tabulku (HueSatMap). Toto nastavení je dostupné pouze pokud ji vybrané DCP obsahuje.
 TP_ICM_APPLYLOOKTABLE;Tabulka vzhledu
 TP_ICM_APPLYLOOKTABLE_TOOLTIP;Použije vloženou DCP tabulku vzhledu. Nastavení je dostupné pouze pokud ji vybrané DCP obsahuje.
-TP_ICM_BLENDCMSMATRIX;Smísení ICC světel s matici
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Povolit obnovení vypálených jasů při použití ICC profilů založených na LUT.
 TP_ICM_BPC;Kompenzace černého bodu
 TP_ICM_DCPILLUMINANT;Osvětlení
 TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolované
@@ -1862,7 +1826,6 @@ TP_RAWCACORR_AUTOIT_TOOLTIP;Toto nastavení je dostupné po zatržení volby "Au
 TP_RAWCACORR_AVOIDCOLORSHIFT;Zabránit posunu barev
 TP_RAWCACORR_CABLUE;Modrá
 TP_RAWCACORR_CARED;Červená
-TP_RAWCACORR_CASTR;Síla
 TP_RAWEXPOS_BLACKS;Úrovně černé
 TP_RAWEXPOS_BLACK_0;Zelená 1 (řídící)
 TP_RAWEXPOS_BLACK_1;Červená
@@ -1920,15 +1883,12 @@ TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Vyrovná jas ostatních snímků podle jasu
 TP_RAW_PIXELSHIFTGREEN;Kontrolovat zelený kanál na pohyb
 TP_RAW_PIXELSHIFTHOLEFILL;Vyplnit díry v masce pohybu
 TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Vyplnit díry v masce pohybu
-TP_RAW_PIXELSHIFTLMMSE;Použít LMMSE pro části s pohybem
-TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Pro oblasti s pohybem použít LMMSE namísto AMaZE.\nUžitečné pro fotografie s vysokým ISO.
 TP_RAW_PIXELSHIFTMEDIAN;Použít medián pro části s pohybem
 TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Pro oblasti s pohybem použijte medián všech snímků namísto vybraného.\nOdstraní objekty, které jsou na všech snímcích na různých místech.\nVytvoří efekt pohybu pro pomalu se pohybující (překrývající se) objekty.
 TP_RAW_PIXELSHIFTMM_AUTO;Automatická
 TP_RAW_PIXELSHIFTMM_CUSTOM;Vlastní
 TP_RAW_PIXELSHIFTMM_OFF;Vypnuto
 TP_RAW_PIXELSHIFTMOTIONMETHOD;Korekce pohybu
-TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 znamená bez detekce pohybu.\n1 - 99 znamená, že pohybu bude detekován dle této hodnoty. Pro zvýšení míry detekce použijte vyšší hodnotu.\n100 znamená, že bude použito AMaZE demozajkování snímku.
 TP_RAW_PIXELSHIFTNONGREENCROSS;Kontrolovat pohyb v červeném a modrém kanálu
 TP_RAW_PIXELSHIFTSHOWMOTION;Ukázat masku pohybu
 TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Ukázat pouze masku pohybu
@@ -1975,7 +1935,6 @@ TP_RETINEX_GAIN;Zisk
 TP_RETINEX_GAINOFFS;Zisk a posun (jasu)
 TP_RETINEX_GAINTRANSMISSION;Přenos zisku
 TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Zesílí nebo zeslabí mapu přenosu pro dosažení požadovaného jasu.\nOsa X je přenos.\nOsa Y je zisk.
-TP_RETINEX_GAIN_TOOLTIP;Působí na obnovený obrázek.\n\nToto je velmi odlišné od ostatních nastavení. Použito pro černé nebo bílé pixely a pro vyvážení histogramu.
 TP_RETINEX_GAMMA;Gama
 TP_RETINEX_GAMMA_FREE;Volná
 TP_RETINEX_GAMMA_HIGH;Vysoká
@@ -2053,10 +2012,8 @@ TP_SAVEDIALOG_OK_TIP;Zkratka: <b>Ctrl-Enter</b>
 TP_SHADOWSHLIGHTS_HIGHLIGHTS;Světla
 TP_SHADOWSHLIGHTS_HLTONALW;Tónový rozsah světel
 TP_SHADOWSHLIGHTS_LABEL;Stíny/Světla
-TP_SHADOWSHLIGHTS_LOCALCONTR;Místní kontrast
 TP_SHADOWSHLIGHTS_RADIUS;Poloměr
 TP_SHADOWSHLIGHTS_SHADOWS;Stíny
-TP_SHADOWSHLIGHTS_SHARPMASK;Maska ostrosti
 TP_SHADOWSHLIGHTS_SHTONALW;Tónový rozsah stínů
 TP_SHARPENEDGE_AMOUNT;Kvantita
 TP_SHARPENEDGE_LABEL;Hrany

rtdata/languages/Deutsch

@@ -177,7 +177,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;LMMSE-Verbesserungsstufen überspringen
 EXPORT_BYPASS_SHARPENEDGE;Kantenschärfung überspringen
 EXPORT_BYPASS_SHARPENING;Schärfung überspringen
 EXPORT_BYPASS_SHARPENMICRO;Mikrokontrast überspringen
-EXPORT_BYPASS_SH_HQ;Schatten/Lichter überspringen\n(Schärfemaske)
 EXPORT_FASTEXPORTOPTIONS;<b>Schnell-Export - Einstellungen</b>
 EXPORT_INSTRUCTIONS;Die Einstellungen zum schnellen Export\nerlauben es, zeit- und ressourcenintensive\nEntwicklungsschritte zu überspringen und dafür\ndie Warteschlangenverarbeitung mit\nschnellen Export-Einstellungen auszuführen.\nDieses Vorgehen wird zur schnelleren\nGenerierung von gering aufgelösten Bildern\nempfohlen, falls es auf die Geschwindigkeit\nankommt oder für ein oder mehrere Bilder\nandere Ausgabegrößen gewünscht werden,\nohne Änderungen an deren gespeicherten\nParameter vornehmen zu müssen.
 EXPORT_MAXHEIGHT;Maximale Höhe:
@@ -190,7 +189,6 @@ EXPORT_USE_FAST_PIPELINE_TIP;Wendet alle Bearbeitungsschritte, im Gegensatz\nzu
 EXPORT_USE_NORMAL_PIPELINE;Standard
 EXTPROGTARGET_1;RAW
 EXTPROGTARGET_2;Stapelverarbeitung beendet
-FILEBROWSER_ADDDELTEMPLATE;Vorlagen hinzufügen/entfernen...
 FILEBROWSER_APPLYPROFILE;Profil anwenden
 FILEBROWSER_APPLYPROFILE_PARTIAL;Profil selektiv anwenden
 FILEBROWSER_AUTODARKFRAME;Automatisches Dunkelbild
@@ -1134,7 +1132,6 @@ PREFERENCES_BEHADDALLHINT;Setzt alle Parameter auf <b>Hinzufügen</b>.\nAnpassun
 PREFERENCES_BEHAVIOR;Verhalten
 PREFERENCES_BEHSETALL;Alle setzen
 PREFERENCES_BEHSETALLHINT;Setzt alle Parameter auf <b>Setzen</b>.\nAnpassungen der Parameter in der Hintergrundstapelverarbeitung werden als <b>Absolut</b> zu den gespeicherten Werten interpretiert.
-PREFERENCES_BLACKBODY;Wolfram
 PREFERENCES_CACHECLEAR;Löschen
 PREFERENCES_CACHECLEAR_ALL;Alle Dateien im Zwischenspeicher löschen:
 PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Alle Dateien im Zwischenspeicher löschen mit Ausnahme der Bearbeitungsprofile:
@@ -1171,11 +1168,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Format
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;Tag-ID
 PREFERENCES_CUSTPROFBUILDPATH;Anwendungspfad
-PREFERENCES_D50;5000K
-PREFERENCES_D50_OLD;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
 PREFERENCES_DARKFRAMEFOUND;Gefunden
 PREFERENCES_DARKFRAMESHOTS;Aufnahmen
 PREFERENCES_DARKFRAMETEMPLATES;Vorlagen
@@ -1198,32 +1190,15 @@ PREFERENCES_FLATFIELDFOUND;Gefunden
 PREFERENCES_FLATFIELDSDIR;Weißbild-Verzeichnis
 PREFERENCES_FLATFIELDSHOTS;Aufnahmen
 PREFERENCES_FLATFIELDTEMPLATES;Vorlagen
-PREFERENCES_FLUOF2;Fluoreszenz F2
-PREFERENCES_FLUOF7;Fluoreszenz F7
-PREFERENCES_FLUOF11;Fluoreszenz F11
 PREFERENCES_FORIMAGE;Für Bilddateien
 PREFERENCES_FORRAW;Für RAW-Dateien
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Gleiche Miniaturbildgröße in der Dateiverwaltung und dem Filmstreifen verwenden
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Unterschiedliche Miniaturbildgrößen benötigen mehr Verarbeitungszeit beim Wechsel zwischen der Dateiverwaltung und dem Editor
 PREFERENCES_GIMPPATH;GIMP Installationsverzeichnis
-PREFERENCES_GREY;Yb-Luminanz (%) des Ausgabegerätes
-PREFERENCES_GREY05;Yb = 05 CIE L#30
-PREFERENCES_GREY10;Yb = 10 CIE L#40
-PREFERENCES_GREY15;Yb = 15 CIE L#45
-PREFERENCES_GREY18;Yb = 18 CIE L#50
-PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb = 23 CIE L#55
-PREFERENCES_GREY30;Yb = 30 CIE L#60
-PREFERENCES_GREY40;Yb = 40 CIE L#70
-PREFERENCES_GREYSC;Szenen-Yb-Luminanz (%)
-PREFERENCES_GREYSC18;Yb = 18 CIE L#49
-PREFERENCES_GREYSCA;Automatisch
 PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogramm linksseitig
-PREFERENCES_HISTOGRAMWORKING;Das Arbeitsprofil zur Darstellung des Haupthistogramms verwenden
 PREFERENCES_HISTOGRAM_TOOLTIP;Wenn aktiviert, wird das Arbeitsprofil für die Darstellung\ndes Haupthistogramms verwendet, andernfalls das des\ngammakorrigierten Ausgangsprofils.
 PREFERENCES_HLTHRESHOLD;Lichter - Schwelle
 PREFERENCES_ICCDIR;ICC-Profile-Verzeichnis
-PREFERENCES_IMG_RELOAD_NEEDED;Änderungen werden nur auf neu geöffnete Bilder angewendet
 PREFERENCES_IMPROCPARAMS;Standard-Bearbeitungsprofile
 PREFERENCES_INSPECT_LABEL;Bildzwischenspeicher
 PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximale Anzahl Bilder im Zwischenspeicher
@@ -1242,7 +1217,6 @@ PREFERENCES_MENUGROUPLABEL;Untermenü Farbmarkierung
 PREFERENCES_MENUGROUPPROFILEOPERATIONS;Untermenü Profiloperationen
 PREFERENCES_MENUGROUPRANK;Untermenü Bewertung
 PREFERENCES_MENUOPTIONS;Menüoptionen
-PREFERENCES_METADATA;Metadaten
 PREFERENCES_MONINTENT;Standard-Rendering-Intent
 PREFERENCES_MONITOR;Monitor
 PREFERENCES_MONPROFILE;Standardfarbprofil
@@ -1320,9 +1294,7 @@ PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutrales RAW-Bild
 PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Eingebundenes JPEG wenn in Originalgröße, sonst neutrales RAW-Bild
 PREFERENCES_TP_LABEL;Werkzeugbereich:
 PREFERENCES_TP_VSCROLLBAR;Keine vertikale Scrollbar
-PREFERENCES_TUNNELMETADATA;Exif/XMP unverändert in die Ausgabedatei übernehmen.
 PREFERENCES_USEBUNDLEDPROFILES;Standardprofile verwenden
-PREFERENCES_VIEW;Weißabgleich-Einstellung des Ausgabegerätes (Monitor, TV, Projektor, usw.)
 PREFERENCES_WORKFLOW;Layout
 PROFILEPANEL_COPYPPASTE;Zu kopierende Parameter
 PROFILEPANEL_GLOBALPROFILES;Standardprofile
@@ -1537,8 +1509,6 @@ TP_COLORAPP_SURROUND_DARK;Dunkel
 TP_COLORAPP_SURROUND_DIM;Gedimmt
 TP_COLORAPP_SURROUND_EXDARK;Extrem Dunkel (Cutsheet)
 TP_COLORAPP_SURROUND_TOOLTIP;Verändert Töne und Farben unter Berücksichtigung der\nBetrachtungsbedingungen des Ausgabegerätes.\n\n<b>Durchschnitt:</b>\nDurchschnittliche Lichtumgebung (Standard).\nDas Bild wird nicht angepasst.\n\n<b>Gedimmt:</b>\nGedimmte Umgebung (TV). Das Bild wird leicht dunkel.\n\n<b>Dunkel:</b>\nDunkle Umgebung (Projektor). Das Bild wird dunkler.\n\n<b>Extrem dunkel:</b>\nExtrem dunkle Umgebung. Das Bild wird sehr dunkel.
-TP_COLORAPP_SURSOURCE;Dunkle Umgebung
-TP_COLORAPP_SURSOURCE_TOOLTIP;Kann verwendet werden, wenn das Quellbild\neinen schwarzen Rahmen besitzt.
 TP_COLORAPP_TCMODE_BRIGHTNESS;Helligkeit (Q)
 TP_COLORAPP_TCMODE_CHROMA;Buntheit (H)
 TP_COLORAPP_TCMODE_COLORF;Farbigkeit (M)
@@ -1640,7 +1610,6 @@ TP_DEHAZE_SHOW_DEPTH_MAP;Maske anzeigen
 TP_DEHAZE_STRENGTH;Intensität
 TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto-Multizonen
 TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatisch Global
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Bewertung des Farbrauschens.\nDie Bewertung ist ungenau und sehr subjektiv!
 TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Delta-Chrominanz Blau / Gelb
 TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominanzkurve
 TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Erhöht / Reduziert die Intensität der\nChrominanz-Rauschreduzierung in\nAbhängigkeit der Farbsättigung.
@@ -1658,8 +1627,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Rauschen: Mittelwert = %1  Hoch =
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Rauschen: Mittelwert = ---   Hoch = ---
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Kachelgröße = %1 Zentrum: Tx = %2  Ty = %2
 TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Delta-Chrominanz Rot / Grün
-TP_DIRPYRDENOISE_ENH;Erweiterter Modus
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Erhöht die Qualität der Rauschreduzierung auf Kosten einer um 20% erhöhten Verarbeitungszeit.
 TP_DIRPYRDENOISE_LABEL;Rauschreduzierung
 TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminanzkontrolle
 TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminanzkurve
@@ -1688,7 +1655,6 @@ TP_DIRPYRDENOISE_MEDIAN_PASSES;Iterationen
 TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Manchmal führt ein kleines 3×3-Fenster mit\nmehreren Iterationen zu besseren Ergebnissen\nals ein 7×7-Fenster mit nur einer Iteration.
 TP_DIRPYRDENOISE_MEDIAN_TYPE;Mediantyp
 TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Einen Medianfilter mit der gewünschten Fenstergröße auswählen.\nJe größer das Fenster, umso länger dauert die Verarbeitungszeit.\n\n3×3 weich: Nutzt 5 Pixel in einem 3×3-Pixelfenster.\n3×3: Nutzt 9 Pixel in einem 3×3-Pixelfenster.\n5×5 weich: Nutzt 13 Pixel in einem 5×5-Pixelfenster.\n5×5: Nutzt 25 Pixel in einem 5×5-Pixelfenster.\n7×7: Nutzt 49 Pixel in einem 7×7-Pixelfenster.\n9×9: Nutzt 81 Pixel in einem 9×9-Pixelfenster.\n\nManchmal ist das Ergebnis mit einem kleineren Fenster und mehreren Iterationen besser, als mit einem größeren und nur einer Iteration.
-TP_DIRPYRDENOISE_SLI;Regler
 TP_DIRPYRDENOISE_TYPE_3X3;3×3
 TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 weich
 TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1793,8 +1759,6 @@ TP_ICM_APPLYHUESATMAP;Basistabelle
 TP_ICM_APPLYHUESATMAP_TOOLTIP;Die eingebettete DCP-Basistabelle verwenden.\nDie Einstellung ist nur verfügbar wenn sie vom\nEingangsfarbprofil unterstützt wird.
 TP_ICM_APPLYLOOKTABLE;“Look“-Tabelle
 TP_ICM_APPLYLOOKTABLE_TOOLTIP;Die eingebettete DCP-“Look“-Tabelle verwenden.\nDie Einstellung ist nur verfügbar wenn sie vom\nEingangsfarbprofil unterstützt wird.
-TP_ICM_BLENDCMSMATRIX;ICC Lichter mit Matrix überlagern
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Stellt bei Verwendung von LUT-basierten ICC-Profilen die Lichter wieder her.
 TP_ICM_BPC;Schwarzpunkt-Kompensation
 TP_ICM_DCPILLUMINANT;Illumination
 TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpoliert
@@ -1925,7 +1889,6 @@ TP_RAWCACORR_AUTOIT_TOOLTIP;Diese Einstellung ist verfügbar, wenn "Autokorrektu
 TP_RAWCACORR_AVOIDCOLORSHIFT;Farbverschiebungen vermeiden
 TP_RAWCACORR_CABLUE;Blau
 TP_RAWCACORR_CARED;Rot
-TP_RAWCACORR_CASTR;Intensität
 TP_RAWEXPOS_BLACKS;Schattenkompression
 TP_RAWEXPOS_BLACK_0;Grün 1 (Master)
 TP_RAWEXPOS_BLACK_1;Rot
@@ -1984,8 +1947,6 @@ TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Gleicht die Helligkeit der Frames an den ak
 TP_RAW_PIXELSHIFTGREEN;Bewegung im Grün-Kanal erkennen
 TP_RAW_PIXELSHIFTHOLEFILL;Lücken in der Bewegungsmaske erkennen
 TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Lücken in der Bewegungsmaske erkennen.
-TP_RAW_PIXELSHIFTLMMSE;LMMSE für Bewegungsbereiche verwenden
-TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;LMMSE anstatt AMaZE für bewegte Bildbereiche verwenden.\nSinnvoll bei High-ISO-Aufnahmen.
 TP_RAW_PIXELSHIFTMEDIAN;Median
 TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Verwenden Sie den Median aller Frames anstelle des\nausgewählten Frames für Regionen mit Bewegung.\nEntfernt Objekte, die an verschiedenen Stellen in allen\nFrames vorkommen. Erzeugt einen Bewegungseffekt\nauf langsame (überlappende) Objekte.
 TP_RAW_PIXELSHIFTMM_AUTO;Automatisch
@@ -1993,7 +1954,6 @@ TP_RAW_PIXELSHIFTMM_CUSTOM;Benutzerdefiniert
 TP_RAW_PIXELSHIFTMM_OFF;Aus
 TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
 TP_RAW_PIXELSHIFTMOTIONMETHOD;Bewegungskorrektur
-TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 = Keine Bewegungserkennung\n1 - 99 = Bewegung wird entsprechend dem Wert erkannt.\nHöhere Werte erhöhen die Trefferquote\n100 = Der mit AMaZE interpolierte Frame wird verwendet.
 TP_RAW_PIXELSHIFTNONGREENCROSS;Bewegung im Rot/Blau-Kanal erkennen
 TP_RAW_PIXELSHIFTSHOWMOTION;Bewegungsmaske anzeigen
 TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Nur Maske anzeigen
@@ -2042,7 +2002,6 @@ TP_RETINEX_GAIN;Kontrast
 TP_RETINEX_GAINOFFS;Verstärkung und Ausgleich (Helligkeit)
 TP_RETINEX_GAINTRANSMISSION;Transmissionsverstärkung
 TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Ändert die Helligkeit durch Verstärkung oder\nAbschwächung der Transmissionskarte.
-TP_RETINEX_GAIN_TOOLTIP;Wirkt sich auf das verarbeitete Bild aus. Wird für schwarze oder weiße Pixel verwendet und hilft das Histogramm auszugleichen.
 TP_RETINEX_GAMMA;Gammakorrektur
 TP_RETINEX_GAMMA_FREE;Benutzerdefiniert
 TP_RETINEX_GAMMA_HIGH;Hoch
@@ -2120,10 +2079,8 @@ TP_SAVEDIALOG_OK_TIP;Taste: <b>Strg</b> + <b>Enter</b>
 TP_SHADOWSHLIGHTS_HIGHLIGHTS;Lichter
 TP_SHADOWSHLIGHTS_HLTONALW;Tonwertbreite Lichter
 TP_SHADOWSHLIGHTS_LABEL;Schatten / Lichter
-TP_SHADOWSHLIGHTS_LOCALCONTR;Lokaler Kontrast
 TP_SHADOWSHLIGHTS_RADIUS;Radius
 TP_SHADOWSHLIGHTS_SHADOWS;Schatten
-TP_SHADOWSHLIGHTS_SHARPMASK;Schärfemaske
 TP_SHADOWSHLIGHTS_SHTONALW;Tonwertbreite Schatten
 TP_SHARPENEDGE_AMOUNT;Intensität
 TP_SHARPENEDGE_LABEL;Kantenschärfung

rtdata/languages/English (UK)

@@ -218,7 +218,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
 !EXPORT_BYPASS_SHARPENEDGE;Bypass Edge Sharpening
 !EXPORT_BYPASS_SHARPENING;Bypass Sharpening
 !EXPORT_BYPASS_SHARPENMICRO;Bypass Microcontrast
-!EXPORT_BYPASS_SH_HQ;Bypass Sharp Mask Shadows/Highlights
 !EXPORT_FASTEXPORTOPTIONS;<b>Fast Export Options</b>
 !EXPORT_INSTRUCTIONS;Fast Export options provide overrides to bypass time and resource consuming development settings and to run queue processing using the fast export settings instead. This method is recommended for quicker generation of lower resolution images when speed is a priority or when resized output is desired for one or many images without making modifications to their saved development parameters.
 !EXPORT_MAXHEIGHT;Maximum height:
@@ -231,7 +230,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
 !EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
 !EXTPROGTARGET_1;raw
 !EXTPROGTARGET_2;queue-processed
-!FILEBROWSER_ADDDELTEMPLATE;Add/Del templates...
 !FILEBROWSER_APPLYPROFILE;Apply
 !FILEBROWSER_APPLYPROFILE_PARTIAL;Apply - partial
 !FILEBROWSER_AUTODARKFRAME;Auto dark-frame
@@ -1129,7 +1127,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
 !PREFERENCES_BEHADDALLHINT;Set all parameters to the <b>Add</b> mode.\nAdjustments of parameters in the batch tool panel will be <b>deltas</b> to the stored values.
 !PREFERENCES_BEHSETALL;All to 'Set'
 !PREFERENCES_BEHSETALLHINT;Set all parameters to the <b>Set</b> mode.\nAdjustments of parameters in the batch tool panel will be <b>absolute</b>, the actual values will be displayed.
-!PREFERENCES_BLACKBODY;Tungsten
 !PREFERENCES_CACHECLEAR;Clear
 !PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
 !PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
@@ -1166,11 +1163,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
 !PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
 !PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
 !PREFERENCES_CUSTPROFBUILDPATH;Executable path
-!PREFERENCES_D50;Settings in main menu
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_D55;5500K
-!PREFERENCES_D60;6000K
-!PREFERENCES_D65;6500K
 !PREFERENCES_DARKFRAMEFOUND;Found
 !PREFERENCES_DARKFRAMESHOTS;shots
 !PREFERENCES_DARKFRAMETEMPLATES;templates
@@ -1193,31 +1185,14 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
 !PREFERENCES_FLATFIELDSDIR;Flat-fields directory
 !PREFERENCES_FLATFIELDSHOTS;shots
 !PREFERENCES_FLATFIELDTEMPLATES;templates
-!PREFERENCES_FLUOF2;Fluorescent F2
-!PREFERENCES_FLUOF7;Fluorescent F7
-!PREFERENCES_FLUOF11;Fluorescent F11
 !PREFERENCES_FORIMAGE;For non-raw photos
 !PREFERENCES_FORRAW;For raw photos
 !PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
 !PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
 !PREFERENCES_GIMPPATH;GIMP installation directory
-!PREFERENCES_GREY;Output device's Yb luminance (%)
-!PREFERENCES_GREY05;Yb=05 CIE L#30
-!PREFERENCES_GREY10;Yb=10 CIE L#40
-!PREFERENCES_GREY15;Yb=15 CIE L#45
-!PREFERENCES_GREY18;Settings in main menu
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREY23;Yb=23 CIE L#55
-!PREFERENCES_GREY30;Yb=30 CIE L#60
-!PREFERENCES_GREY40;Yb=40 CIE L#70
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
 !PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram in left panel
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
 !PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
 !PREFERENCES_HLTHRESHOLD;Threshold for clipped highlights
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
 !PREFERENCES_IMPROCPARAMS;Default Processing Profile
 !PREFERENCES_INSPECT_LABEL;Inspect
 !PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
@@ -1233,7 +1208,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
 !PREFERENCES_MENUGROUPPROFILEOPERATIONS;Group "Processing profile operations"
 !PREFERENCES_MENUGROUPRANK;Group "Rank"
 !PREFERENCES_MENUOPTIONS;Context Menu Options
-!PREFERENCES_METADATA;Metadata
 !PREFERENCES_MONINTENT;Default rendering intent
 !PREFERENCES_MONITOR;Monitor
 !PREFERENCES_MONPROFILE_WARNOSX;Due to MacOS limitations, only sRGB is supported.
@@ -1308,9 +1282,7 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
 !PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
 !PREFERENCES_TP_LABEL;Tool panel:
 !PREFERENCES_TP_VSCROLLBAR;Hide vertical scrollbar
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
 !PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-!PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
 !PREFERENCES_WORKFLOW;Layout
 !PROFILEPANEL_COPYPPASTE;Parameters to copy
 !PROFILEPANEL_GLOBALPROFILES;Bundled profiles
@@ -1507,8 +1479,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
 !TP_COLORAPP_SURROUND_DARK;Dark
 !TP_COLORAPP_SURROUND_DIM;Dim
 !TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
 !TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
 !TP_COLORAPP_TCMODE_CHROMA;Chroma
 !TP_COLORAPP_TCMODE_LABEL1;Curve mode 1
@@ -1599,7 +1569,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
 !TP_DEHAZE_STRENGTH;Strength
 !TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
 !TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
 !TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
 !TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
 !TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
@@ -1614,8 +1583,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
 !TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Preview noise: Mean=%1  High=%2
 !TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= -   High= -
 !TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
 !TP_DIRPYRDENOISE_LABEL;Noise Reduction
 !TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
 !TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
@@ -1643,7 +1610,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
 !TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
 !TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
 !TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
 !TP_DIRPYRDENOISE_TYPE_3X3;3×3
 !TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
 !TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1739,8 +1705,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
 !TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
 !TP_ICM_APPLYLOOKTABLE;Look table
 !TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-!TP_ICM_BLENDCMSMATRIX;Blend ICC highlights with matrix
-!TP_ICM_BLENDCMSMATRIX_TOOLTIP;Enable to recover clipped highlights when using LUT-based ICC profiles.
 !TP_ICM_BPC;Black Point Compensation
 !TP_ICM_DCPILLUMINANT;Illuminant
 !TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
@@ -1860,7 +1824,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
 !TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
 !TP_RAWCACORR_CABLUE;Blue
 !TP_RAWCACORR_CARED;Red
-!TP_RAWCACORR_CASTR;Strength
 !TP_RAWEXPOS_BLACKS;Black Levels
 !TP_RAWEXPOS_BLACK_0;Green 1 (lead)
 !TP_RAWEXPOS_BLACK_1;Red
@@ -1917,15 +1880,12 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
 !TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
 !TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
 !TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
 !TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
 !TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
 !TP_RAW_PIXELSHIFTMM_AUTO;Automatic
 !TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
 !TP_RAW_PIXELSHIFTMM_OFF;Off
 !TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
 !TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
 !TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
 !TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -1974,7 +1934,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
 !TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
 !TP_RETINEX_GAINTRANSMISSION;Gain transmission
 !TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
 !TP_RETINEX_GAMMA;Gamma
 !TP_RETINEX_GAMMA_FREE;Free
 !TP_RETINEX_GAMMA_HIGH;High
@@ -2051,10 +2010,8 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
 !TP_SHADOWSHLIGHTS_HIGHLIGHTS;Highlights
 !TP_SHADOWSHLIGHTS_HLTONALW;Highlights tonal width
 !TP_SHADOWSHLIGHTS_LABEL;Shadows/Highlights
-!TP_SHADOWSHLIGHTS_LOCALCONTR;Local contrast
 !TP_SHADOWSHLIGHTS_RADIUS;Radius
 !TP_SHADOWSHLIGHTS_SHADOWS;Shadows
-!TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
 !TP_SHADOWSHLIGHTS_SHTONALW;Shadows tonal width
 !TP_SHARPENEDGE_AMOUNT;Quantity
 !TP_SHARPENEDGE_LABEL;Edges

rtdata/languages/English (US)

@@ -100,7 +100,6 @@
 !EXPORT_BYPASS_SHARPENEDGE;Bypass Edge Sharpening
 !EXPORT_BYPASS_SHARPENING;Bypass Sharpening
 !EXPORT_BYPASS_SHARPENMICRO;Bypass Microcontrast
-!EXPORT_BYPASS_SH_HQ;Bypass Sharp Mask Shadows/Highlights
 !EXPORT_FASTEXPORTOPTIONS;<b>Fast Export Options</b>
 !EXPORT_INSTRUCTIONS;Fast Export options provide overrides to bypass time and resource consuming development settings and to run queue processing using the fast export settings instead. This method is recommended for quicker generation of lower resolution images when speed is a priority or when resized output is desired for one or many images without making modifications to their saved development parameters.
 !EXPORT_MAXHEIGHT;Maximum height:
@@ -113,7 +112,6 @@
 !EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
 !EXTPROGTARGET_1;raw
 !EXTPROGTARGET_2;queue-processed
-!FILEBROWSER_ADDDELTEMPLATE;Add/Del templates...
 !FILEBROWSER_APPLYPROFILE;Apply
 !FILEBROWSER_APPLYPROFILE_PARTIAL;Apply - partial
 !FILEBROWSER_AUTODARKFRAME;Auto dark-frame
@@ -1056,7 +1054,6 @@
 !PREFERENCES_BEHAVIOR;Behavior
 !PREFERENCES_BEHSETALL;All to 'Set'
 !PREFERENCES_BEHSETALLHINT;Set all parameters to the <b>Set</b> mode.\nAdjustments of parameters in the batch tool panel will be <b>absolute</b>, the actual values will be displayed.
-!PREFERENCES_BLACKBODY;Tungsten
 !PREFERENCES_CACHECLEAR;Clear
 !PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
 !PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
@@ -1093,11 +1090,6 @@
 !PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
 !PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
 !PREFERENCES_CUSTPROFBUILDPATH;Executable path
-!PREFERENCES_D50;Settings in main menu
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_D55;5500K
-!PREFERENCES_D60;6000K
-!PREFERENCES_D65;6500K
 !PREFERENCES_DARKFRAMEFOUND;Found
 !PREFERENCES_DARKFRAMESHOTS;shots
 !PREFERENCES_DARKFRAMETEMPLATES;templates
@@ -1120,32 +1112,15 @@
 !PREFERENCES_FLATFIELDSDIR;Flat-fields directory
 !PREFERENCES_FLATFIELDSHOTS;shots
 !PREFERENCES_FLATFIELDTEMPLATES;templates
-!PREFERENCES_FLUOF2;Fluorescent F2
-!PREFERENCES_FLUOF7;Fluorescent F7
-!PREFERENCES_FLUOF11;Fluorescent F11
 !PREFERENCES_FORIMAGE;For non-raw photos
 !PREFERENCES_FORRAW;For raw photos
 !PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
 !PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
 !PREFERENCES_GIMPPATH;GIMP installation directory
-!PREFERENCES_GREY;Output device's Yb luminance (%)
-!PREFERENCES_GREY05;Yb=05 CIE L#30
-!PREFERENCES_GREY10;Yb=10 CIE L#40
-!PREFERENCES_GREY15;Yb=15 CIE L#45
-!PREFERENCES_GREY18;Settings in main menu
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREY23;Yb=23 CIE L#55
-!PREFERENCES_GREY30;Yb=30 CIE L#60
-!PREFERENCES_GREY40;Yb=40 CIE L#70
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
 !PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram in left panel
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
 !PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
 !PREFERENCES_HLTHRESHOLD;Threshold for clipped highlights
 !PREFERENCES_ICCDIR;Directory containing color profiles
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
 !PREFERENCES_IMPROCPARAMS;Default Processing Profile
 !PREFERENCES_INSPECT_LABEL;Inspect
 !PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
@@ -1164,7 +1139,6 @@
 !PREFERENCES_MENUGROUPPROFILEOPERATIONS;Group "Processing profile operations"
 !PREFERENCES_MENUGROUPRANK;Group "Rank"
 !PREFERENCES_MENUOPTIONS;Context Menu Options
-!PREFERENCES_METADATA;Metadata
 !PREFERENCES_MONINTENT;Default rendering intent
 !PREFERENCES_MONITOR;Monitor
 !PREFERENCES_MONPROFILE;Default color profile
@@ -1242,9 +1216,7 @@
 !PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
 !PREFERENCES_TP_LABEL;Tool panel:
 !PREFERENCES_TP_VSCROLLBAR;Hide vertical scrollbar
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
 !PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-!PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
 !PREFERENCES_WORKFLOW;Layout
 !PROFILEPANEL_COPYPPASTE;Parameters to copy
 !PROFILEPANEL_GLOBALPROFILES;Bundled profiles
@@ -1459,8 +1431,6 @@
 !TP_COLORAPP_SURROUND_DIM;Dim
 !TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
 !TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\n<b>Average</b>: Average light environment (standard). The image will not change.\n\n<b>Dim</b>: Dim environment (TV). The image will become slighty dark.\n\n<b>Dark</b>: Dark environment (projector). The image will become more dark.\n\n<b>Extremly Dark</b>: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
 !TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
 !TP_COLORAPP_TCMODE_CHROMA;Chroma
 !TP_COLORAPP_TCMODE_COLORF;Colorfulness
@@ -1562,7 +1532,6 @@
 !TP_DEHAZE_STRENGTH;Strength
 !TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
 !TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
 !TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
 !TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
 !TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
@@ -1580,8 +1549,6 @@
 !TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= -   High= -
 !TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2  Ty=%3
 !TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
 !TP_DIRPYRDENOISE_LABEL;Noise Reduction
 !TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
 !TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
@@ -1610,7 +1577,6 @@
 !TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
 !TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
 !TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
 !TP_DIRPYRDENOISE_TYPE_3X3;3×3
 !TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
 !TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1715,8 +1681,6 @@
 !TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
 !TP_ICM_APPLYLOOKTABLE;Look table
 !TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-!TP_ICM_BLENDCMSMATRIX;Blend ICC highlights with matrix
-!TP_ICM_BLENDCMSMATRIX_TOOLTIP;Enable to recover clipped highlights when using LUT-based ICC profiles.
 !TP_ICM_BPC;Black Point Compensation
 !TP_ICM_DCPILLUMINANT;Illuminant
 !TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
@@ -1847,7 +1811,6 @@
 !TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
 !TP_RAWCACORR_CABLUE;Blue
 !TP_RAWCACORR_CARED;Red
-!TP_RAWCACORR_CASTR;Strength
 !TP_RAWEXPOS_BLACKS;Black Levels
 !TP_RAWEXPOS_BLACK_0;Green 1 (lead)
 !TP_RAWEXPOS_BLACK_1;Red
@@ -1906,15 +1869,12 @@
 !TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
 !TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
 !TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
 !TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
 !TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
 !TP_RAW_PIXELSHIFTMM_AUTO;Automatic
 !TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
 !TP_RAW_PIXELSHIFTMM_OFF;Off
 !TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
 !TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
 !TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
 !TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -1963,7 +1923,6 @@
 !TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
 !TP_RETINEX_GAINTRANSMISSION;Gain transmission
 !TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
 !TP_RETINEX_GAMMA;Gamma
 !TP_RETINEX_GAMMA_FREE;Free
 !TP_RETINEX_GAMMA_HIGH;High
@@ -2041,10 +2000,8 @@
 !TP_SHADOWSHLIGHTS_HIGHLIGHTS;Highlights
 !TP_SHADOWSHLIGHTS_HLTONALW;Highlights tonal width
 !TP_SHADOWSHLIGHTS_LABEL;Shadows/Highlights
-!TP_SHADOWSHLIGHTS_LOCALCONTR;Local contrast
 !TP_SHADOWSHLIGHTS_RADIUS;Radius
 !TP_SHADOWSHLIGHTS_SHADOWS;Shadows
-!TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
 !TP_SHADOWSHLIGHTS_SHTONALW;Shadows tonal width
 !TP_SHARPENEDGE_AMOUNT;Quantity
 !TP_SHARPENEDGE_LABEL;Edges

rtdata/languages/Espanol

@@ -158,7 +158,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Saltar [raw] Aplicar pasos de mejora LMMSE
 EXPORT_BYPASS_SHARPENEDGE;Saltar Enfoque de bordes
 EXPORT_BYPASS_SHARPENING;Saltar Enfoque
 EXPORT_BYPASS_SHARPENMICRO;Saltar Microcontraste
-EXPORT_BYPASS_SH_HQ;Saltar Máscara de Enfoque Sombras/Luces
 EXPORT_FASTEXPORTOPTIONS;<b>Opciones de Exportación Rápida</b>
 EXPORT_INSTRUCTIONS;Las opciones de Exportación Rápida proporcionan la posibilidad de saltarse pasos de revelado que consumen mucho tiempo y recursos, ejecutando en su lugar el procesamiento de la cola utilizando los ajustes de Exportación Rápida. Se recomienda este método para generar más rápidamente imágenes de menor resolución: cuando la velocidad es prioritaria, o cuando se desea cambiar el tamaño de una o muchas imágenes de salida sin modificar sus parámetros de revelado.
 EXPORT_MAXHEIGHT;Altura máxima:
@@ -171,7 +170,6 @@ EXPORT_USE_FAST_PIPELINE_TIP;Usar un conducto de procesamiento dedicado para las
 EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
 EXTPROGTARGET_1;Raw
 EXTPROGTARGET_2;procesado en cola
-FILEBROWSER_ADDDELTEMPLATE;Añadir/Borrar plantillas...
 FILEBROWSER_APPLYPROFILE;Aplicar perfil
 FILEBROWSER_APPLYPROFILE_PARTIAL;Aplicar perfil (parcial)
 FILEBROWSER_AUTODARKFRAME;Toma Negra automática
@@ -1115,7 +1113,6 @@ PREFERENCES_BEHADDALLHINT;Establezca todos los parámetros del modo <b>Agregar</
 PREFERENCES_BEHAVIOR;Comportamiento
 PREFERENCES_BEHSETALL;Todo para 'Establecer'
 PREFERENCES_BEHSETALLHINT;Todos los parámetros para el modo <b>Establecer</b>.\nLos ajustes de parámetros en el panel de la herramienta de lotes serán serán <b>absolutos</b>, se mostrarán los valores vigentes
-PREFERENCES_BLACKBODY;Tungsteno
 PREFERENCES_CACHECLEAR;Borrar
 PREFERENCES_CACHECLEAR_ALL;Borrar todos los archivos en caché:
 PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Borre todos los archivos en caché excepto los perfiles de procesamiento en caché:
@@ -1146,11 +1143,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Clave de formato
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Nombre
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;ID Etiqueta
 PREFERENCES_CUSTPROFBUILDPATH;Ruta al programa ejecutable
-PREFERENCES_D50;5000°K
-PREFERENCES_D50_OLD;5000°K
-PREFERENCES_D55;5500°K
-PREFERENCES_D60;6000°K
-PREFERENCES_D65;6500°K
 PREFERENCES_DARKFRAMEFOUND;Encontrado
 PREFERENCES_DARKFRAMESHOTS;disparos
 PREFERENCES_DARKFRAMETEMPLATES;plantillas
@@ -1173,32 +1165,15 @@ PREFERENCES_FLATFIELDFOUND;Encontrado
 PREFERENCES_FLATFIELDSDIR;Carpeta de archivos de campo plano
 PREFERENCES_FLATFIELDSHOTS;disparos
 PREFERENCES_FLATFIELDTEMPLATES;plantillas
-PREFERENCES_FLUOF2;Fluorescente F2
-PREFERENCES_FLUOF7;Fluorescente F7
-PREFERENCES_FLUOF11;Fluorescente F11
 PREFERENCES_FORIMAGE;Para fotos de tipo diferente a raw
 PREFERENCES_FORRAW;Para fotos Raw
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;La misma altura en miniatura entre la tira de película y el explorador de archivos
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Tener un tamaño separado,en las miniaturas, requerirá más tiempo de procesamiento cada vez que alterne entre la única pestaña Editor y el Explorador de archivos.
 PREFERENCES_GIMPPATH;Carpeta de instalación de GIMP
-PREFERENCES_GREY;Luminancia (%) Yb del dispositivo de salida
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;Escena Yb luminancia (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;Automático
 PREFERENCES_HISTOGRAMPOSITIONLEFT;Histograma en panel izquierdo
-PREFERENCES_HISTOGRAMWORKING;Usar perfil de trabajo para el histograma principal y el navegador
 PREFERENCES_HISTOGRAM_TOOLTIP;Si está activado, el perfil de trabajo se utiliza para renderizar el histograma principal y el panel navegador, de lo contrario se utiliza el perfil de Gamma de la Corrección de salida.
 PREFERENCES_HLTHRESHOLD;Umbral de luces altas cortadas
 PREFERENCES_ICCDIR;Carpeta con perfiles de color ICC
-PREFERENCES_IMG_RELOAD_NEEDED;Estos cambios requieren que la imagen se vuelva a cargar (o que se abra una nueva imagen) para que tenga efecto.
 PREFERENCES_IMPROCPARAMS;Parámetros de procesamiento de imágenes predeterminados
 PREFERENCES_INSPECT_LABEL;Inspeccionar
 PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Número máximo de imágenes en caché
@@ -1218,7 +1193,6 @@ PREFERENCES_MENUGROUPLABEL;Grupo "Etiquetado con color"
 PREFERENCES_MENUGROUPPROFILEOPERATIONS;Grupo "Operaciones de Perfil de Procesamiento"
 PREFERENCES_MENUGROUPRANK;Grupo "Asignar Rango"
 PREFERENCES_MENUOPTIONS;Opciones de menú de contexto
-PREFERENCES_METADATA;Metadatos
 PREFERENCES_MONINTENT;Intento de representación predeterminado
 PREFERENCES_MONITOR;Monitor
 PREFERENCES_MONPROFILE;Perfil de color predeterminado
@@ -1294,9 +1268,7 @@ PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Representación (Render) Raw neutral
 PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;JPEG incrustado si es de tamaño completo, de lo contrario es neutral sin formato 
 PREFERENCES_TP_LABEL;Panel de herramientas:
 PREFERENCES_TP_VSCROLLBAR;Ocultar barra de desplazamiento vertical del panel de herramientas
-PREFERENCES_TUNNELMETADATA;Copie Exif / IPTC / XMP sin cambios en el archivo de salida
 PREFERENCES_USEBUNDLEDPROFILES;Usar perfiles empaquetados
-PREFERENCES_VIEW;Balance de blancos en el dispositivo de salida (monitor, TV, proyector...)
 PREFERENCES_WORKFLOW;Disposición
 PROFILEPANEL_COPYPPASTE;Parámetros a copiar
 PROFILEPANEL_GLOBALPROFILES;Perfiles empaquetados
@@ -1505,8 +1477,6 @@ TP_COLORAPP_SURROUND_DARK;Oscuro
 TP_COLORAPP_SURROUND_DIM;Luz Tenue
 TP_COLORAPP_SURROUND_EXDARK;Muy oscuro
 TP_COLORAPP_SURROUND_TOOLTIP;Cambia la tonalidad y color de la imagen teniendo en cuenta las condiciones de visualización en el dispositivo de salida\n\n<b>Promedio:</b>\nEntorno con iluminación media(estándar)\nLa imagen no cambiará\n\n<b>\n\n<b>Luz Tenue:</b>\nAmbiente a media luz (TV)\nLa imagen se pondrá ligeramente oscura\n\n<b>Oscuro:</b>\nEntorno oscuro (proyector)\nLa imagen se pondrá más oscura\n\n<b>Muy Oscuro:</b>\nEntorno extremadamente oscuro\nLa imagen se podrá bien oscura
-TP_COLORAPP_SURSOURCE;Entorno oscuro
-TP_COLORAPP_SURSOURCE_TOOLTIP;Puede usarse si la imagen original tiene borde oscuro.
 TP_COLORAPP_TCMODE_BRIGHTNESS;Brillo
 TP_COLORAPP_TCMODE_CHROMA;Crominancia
 TP_COLORAPP_TCMODE_COLORF;Colorido
@@ -1607,7 +1577,6 @@ TP_DEHAZE_SHOW_DEPTH_MAP;Mostrar mapa de profundidad
 TP_DEHAZE_STRENGTH;Fuerza
 TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Control automático de  multi-zonas 
 TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Control automático global
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Trate de evaluar el ruido del color \nTenga cuidado, este cálculo es promedio y es bastante subjetivo.
 TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Crominancia: Azul-Amarillo
 TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Curva de Crominancia
 TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Aumente (multiplique) el valor de todos los controles deslizantes de crominancia. \nEsta curva le permite ajustar la intensidad de la reducción de ruido cromático en función de la cromaticidad, por ejemplo, para aumentar la acción en áreas de baja saturación y para disminuirla en aquellas de alta saturación.
@@ -1625,8 +1594,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Previsualización de ruido: Media
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Previsualización del ruido: Media = - Alta = -
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tamaño del mosaico =% 1, Centro: Tx =% 2 Ty =% 3
 TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Crominancia: Rojo-Verde
-TP_DIRPYRDENOISE_ENH;Modo mejorado
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Incrementa la calidad de la Reducción de Ruido a costa de un incremento de 20% en el tiempo de procesamiento
 TP_DIRPYRDENOISE_LABEL;Reducción del ruido
 TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Control de luminancia
 TP_DIRPYRDENOISE_LUMINANCE_CURVE;Curva de Luminancia
@@ -1655,7 +1622,6 @@ TP_DIRPYRDENOISE_MEDIAN_PASSES;Iteracciones Median
 TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;La aplicación de tres iteraciones de filtro de mediana con un tamaño de ventana de 3 × 3 a menudo conduce a mejores resultados que el uso de una iteración de filtro de mediana con un tamaño de ventana de 7 × 7.
 TP_DIRPYRDENOISE_MEDIAN_TYPE;Tipo Median
 TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Aplica un filtro de mediana para el tamaño de la ventana deseada. Cuanto mayor sea el tamaño de la ventana, más tiempo tardará. \n3 × 3 soft: trata 5 píxeles en una ventana de 3 × 3 píxeles. \n3 × 3: trata 9 píxeles en una ventana de 3 × 3 píxeles. \n5 × 5 suave: trata 13 píxeles en una ventana de 5 × 5 píxeles. \n5 × 5: trata 25 píxeles en una ventana de 5 × 5 píxeles. \n7 × 7: trata 49 píxeles en una ventana de 7 × 7 píxeles. \n9 × 9: trata 81 píxeles en una ventana de 9 × 9 píxeles. \nA veces es posible lograr una mayor calidad ejecutando varias iteraciones con un tamaño de ventana más pequeño que una iteración con una más grande.
-TP_DIRPYRDENOISE_SLI;Deslizador
 TP_DIRPYRDENOISE_TYPE_3X3;3×3
 TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 suavisado
 TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1760,8 +1726,6 @@ TP_ICM_APPLYHUESATMAP;Tabla base
 TP_ICM_APPLYHUESATMAP_TOOLTIP;Emplear la tabla base DCP incrustada (Mapa Hue Sat). La configuración solo está disponible si el DCP seleccionado tiene unoloy the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
 TP_ICM_APPLYLOOKTABLE;Revisar tabla
 TP_ICM_APPLYLOOKTABLE_TOOLTIP;Emplear la tabla de apariencia DCP incrustada. La configuración solo está disponible si el DCP seleccionado tiene uno.
-TP_ICM_BLENDCMSMATRIX;Mezclar las luces altas ICC con matriz
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Permite recuperar luces altas quemadas cuando se usan perfiles ICC basados en LUT
 TP_ICM_BPC;Compensación de punto negro
 TP_ICM_DCPILLUMINANT;Iluminante
 TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolado
@@ -1887,7 +1851,6 @@ TP_RAWCACORR_AUTOIT_TOOLTIP;Esta configuración está disponible si se marca "Co
 TP_RAWCACORR_AVOIDCOLORSHIFT;Evitar el cambio de color
 TP_RAWCACORR_CABLUE;Azul
 TP_RAWCACORR_CARED;Rojo
-TP_RAWCACORR_CASTR;Fuerza
 TP_RAWEXPOS_BLACKS;Niveles de negro
 TP_RAWEXPOS_BLACK_0;Verde 1 (principal)
 TP_RAWEXPOS_BLACK_1;Rojo
@@ -1945,8 +1908,6 @@ TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Ecualice el brillo de los cuadros con el br
 TP_RAW_PIXELSHIFTGREEN;Compruebe el canal verde para el movimiento
 TP_RAW_PIXELSHIFTHOLEFILL;Rellene los fallos en la máscara de movimiento
 TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Rellene los fallos en la máscara de movimiento
-TP_RAW_PIXELSHIFTLMMSE;Utilice LMMSE para regiones móviles
-TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE en lugar de AMaZE para las áreas de movimiento. \nÚtil para imágenes de alta ISO.
 TP_RAW_PIXELSHIFTMEDIAN;Usa la mediana pa3x3 nuevo umbral parara las regiones móviles.
 TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use la mediana de todos los cuadros en lugar del cuadro seleccionado para las regiones con movimiento. \nElimina los objetos que se encuentran en diferentes lugares en todos los cuadros. \nBrinda efecto de movimiento en objetos de movimiento lento (superpuestos).
 TP_RAW_PIXELSHIFTMM_AUTO;Automático
@@ -1954,7 +1915,6 @@ TP_RAW_PIXELSHIFTMM_CUSTOM;Personalizado
 TP_RAW_PIXELSHIFTMM_OFF;Apagado
 TP_RAW_PIXELSHIFTMOTION;Nivel de detección de movimiento (en desuso)
 TP_RAW_PIXELSHIFTMOTIONMETHOD;Corrección del movimiento
-TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 significa que no hay detección de movimiento. \n1 - 99 significa que el movimiento se detectará de acuerdo con este valor. Aumente el valor para aumentar la tasa de detección. \n100 significa que se utilizará el marco de demostración AMaZE.ción de movimiento. \n1 - 99 significa que el movimiento se detectará de acuerdo con este valor. Aumente el valor para aumentar la tasa de detección. \n100 significa que se utilizará el marco de demostración AMaZE.no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
 TP_RAW_PIXELSHIFTNONGREENCROSS;Compruebe los canales rojos/azules para el movimiento
 TP_RAW_PIXELSHIFTSHOWMOTION;Mostrar máscara de movimiento
 TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Mostrar solo máscara de movimiento
@@ -2001,7 +1961,6 @@ TP_RETINEX_GAIN;Aumentar
 TP_RETINEX_GAINOFFS;Aumentar y Offset (brillo)
 TP_RETINEX_GAINTRANSMISSION;Aumentar transmisión
 TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplifique o reduzca el mapa de transmisión para lograr la luminancia. \nAbscisa: transmisión -min desde 0, media y valores (máx.). \nOrdena: ganancia.
-TP_RETINEX_GAIN_TOOLTIP;Actúa sobre la imagen restaurada. \nÉsta es muy diferente de las otras configuraciones. Se utiliza para píxeles blancos o negros, y para ayudar a equilibrar el histograma.
 TP_RETINEX_GAMMA;Gamma
 TP_RETINEX_GAMMA_FREE;Libre
 TP_RETINEX_GAMMA_HIGH;Alta
@@ -2079,10 +2038,8 @@ TP_SAVEDIALOG_OK_TIP;Tecla de Atajo <b>Ctrl-Enter</b>
 TP_SHADOWSHLIGHTS_HIGHLIGHTS;Luces altas
 TP_SHADOWSHLIGHTS_HLTONALW;Ancho tonal de Luces Altas
 TP_SHADOWSHLIGHTS_LABEL;Sombras/Luces altas
-TP_SHADOWSHLIGHTS_LOCALCONTR;Contraste local
 TP_SHADOWSHLIGHTS_RADIUS;Radio
 TP_SHADOWSHLIGHTS_SHADOWS;Sombras
-TP_SHADOWSHLIGHTS_SHARPMASK;Máscara de enfoque
 TP_SHADOWSHLIGHTS_SHTONALW;Ancho tonal de Sombras
 TP_SHARPENEDGE_AMOUNT;Cantidad
 TP_SHARPENEDGE_LABEL;Bordes

rtdata/languages/Francais

@@ -97,7 +97,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Ignorer le niveau d'amélioration LMMSE [raw]
 EXPORT_BYPASS_SHARPENEDGE;Ignorer netteté des bords
 EXPORT_BYPASS_SHARPENING;Ignorer la netteté
 EXPORT_BYPASS_SHARPENMICRO;Ignorer netteté des microcontrastes
-EXPORT_BYPASS_SH_HQ;Ignorer Ombres/Hautes lumières (HQ)
 EXPORT_FASTEXPORTOPTIONS;<b>Options d'Export Rapide</b>
 EXPORT_INSTRUCTIONS;Les options d'Export Rapide permettent de forcer des paramètres afin d'éviter d'utiliser des outils très consommateurs de temps et de ressources, et d'utiliser ces options dans la file de traitement. Cette méthode est recommandée pour la génération rapide d'images de basse résolution quand la vitesse est une priorité ou lorsqu'on désire une version redimensionnée d'une ou plusieurs images de sortie sans avoir à modifier leurs paramètres de développement.
 EXPORT_MAXHEIGHT;Hauteur maximum:
@@ -110,7 +109,6 @@ EXPORT_USE_FAST_PIPELINE_TIP;Utilise un pipeline de traitement dédié pour les
 EXPORT_USE_NORMAL_PIPELINE;Standard\n(ignore des étapes, redimentionne à la fin)
 EXTPROGTARGET_1;raw
 EXTPROGTARGET_2;file de traitement
-FILEBROWSER_ADDDELTEMPLATE;Ajouter/Supprimer le modèle...
 FILEBROWSER_APPLYPROFILE;Appliquer le profil
 FILEBROWSER_APPLYPROFILE_PARTIAL;Appliquer le profil (partiel)
 FILEBROWSER_AUTODARKFRAME;Soustraction automatique de Trame Noire
@@ -1052,7 +1050,6 @@ PREFERENCES_BEHADDALLHINT;Règle tous les paramètres sur le mode <b>Ajoute</b>.
 PREFERENCES_BEHAVIOR;Comportement
 PREFERENCES_BEHSETALL;Tout à 'Remplace'
 PREFERENCES_BEHSETALLHINT;Règle tous les paramètres sur le mode <b>Remplace</b>.\nLa modification des paramètres dans le panneau d'édition en par lot sera <b>absolue</b>, les valeurs réelles seront affichées
-PREFERENCES_BLACKBODY;Tungstène
 PREFERENCES_CACHECLEAR;Vider
 PREFERENCES_CACHECLEAR_ALL;Vider tous les fichiers mis en cache : 
 PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Vider tous les fichiers mis en cache excepté les profils de traitement : 
@@ -1089,11 +1086,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Format des clés
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Nom
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
 PREFERENCES_CUSTPROFBUILDPATH;Chemin de l'exécutable
-PREFERENCES_D50;5000K
-PREFERENCES_D50_OLD;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
 PREFERENCES_DARKFRAMEFOUND;Trouvé
 PREFERENCES_DARKFRAMESHOTS;image(s)
 PREFERENCES_DARKFRAMETEMPLATES;modèle(s)
@@ -1116,32 +1108,15 @@ PREFERENCES_FLATFIELDFOUND;Trouvé
 PREFERENCES_FLATFIELDSDIR;Dossier des images de Champ Uniforme
 PREFERENCES_FLATFIELDSHOTS;image(s)
 PREFERENCES_FLATFIELDTEMPLATES;modèle(s)
-PREFERENCES_FLUOF2;Fluorescent F2
-PREFERENCES_FLUOF7;Fluorescent F7
-PREFERENCES_FLUOF11;Fluorescent F11
 PREFERENCES_FORIMAGE;Pour les fichiers images
 PREFERENCES_FORRAW;Pour les fichiers RAW
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Taille de vignette identique entre l'Éditeur et le Navigateur de Fichier
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Avoir une hauteur différente demandera plus de temp de traitement à chaque fois que vous baculerez entre l'Éditeur unique et le Navigateur de Fichier.
 PREFERENCES_GIMPPATH;Dossier d'intallation de GIMP
-PREFERENCES_GREY;Luminance Yb du périphérique de sortie (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;Luminance Yb de la scène (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;Automatique
 PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogramme dans le panneau de gauche
-PREFERENCES_HISTOGRAMWORKING;Utiliser le profil de travail pour l'histogramme principal et le Navigateur
 PREFERENCES_HISTOGRAM_TOOLTIP;Si activé, le profil couleur de travail est utilisé pour les données d'histogramme et le panneau Navigateur, sinon le profil de travail de sortie "gamma-corrigé" est utilisé.
 PREFERENCES_HLTHRESHOLD;Seuil pour le dépassement de domaine supérieur
 PREFERENCES_ICCDIR;Dossier des profils ICC
-PREFERENCES_IMG_RELOAD_NEEDED;Ces changements nécessitent un rechargement de l'image (ou l'ouverture d'une autre image) pour prendre effet.
 PREFERENCES_IMPROCPARAMS;Paramètres de traitement d'image par défaut
 PREFERENCES_INSPECT_LABEL;Inspecter
 PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Nombre maxi de mémoire tampon
@@ -1160,7 +1135,6 @@ PREFERENCES_MENUGROUPLABEL;Label
 PREFERENCES_MENUGROUPPROFILEOPERATIONS;Opérations sur les profils
 PREFERENCES_MENUGROUPRANK;Classement
 PREFERENCES_MENUOPTIONS;Options du menu
-PREFERENCES_METADATA;Metadonnées
 PREFERENCES_MONINTENT;Intention de rendu par défaut
 PREFERENCES_MONITOR;Moniteur
 PREFERENCES_MONPROFILE;Profil couleur par défaut
@@ -1238,9 +1212,7 @@ PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Rendu Neutre des données Raw
 PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;JPEG inclus si pleine taille, rendu Neutre des données Raw sinon
 PREFERENCES_TP_LABEL;Panneau des outils:
 PREFERENCES_TP_VSCROLLBAR;Cacher la barre de défilement verticale
-PREFERENCES_TUNNELMETADATA;Copier les données Exif/IPTC/XMP tel quel dans le fichier de sortie
 PREFERENCES_USEBUNDLEDPROFILES;Utiliser les profils fournis
-PREFERENCES_VIEW;Point blanc du périphérique sortie (moniteur, TV, projecteur,...)
 PREFERENCES_WORKFLOW;Habitudes de travail
 PROFILEPANEL_COPYPPASTE;Paramètres à copier
 PROFILEPANEL_GLOBALPROFILES;Profils fournis
@@ -1449,8 +1421,6 @@ TP_COLORAPP_SURROUND_DARK;Sombre
 TP_COLORAPP_SURROUND_DIM;Tamisé
 TP_COLORAPP_SURROUND_EXDARK;Extrêmement Sombre (Transparent)
 TP_COLORAPP_SURROUND_TOOLTIP;Change les tons et couleurs pour prendre en compte les conditions de visionnage du périphérique de sortie\n\n<b>Moyen:</b>\nLuminance de l'entourage moyen (standard)\nL'image ne va pas changer\n\n<b>Tamisé:</b>\nEntourage légèrement sombre (TV)\nL'image va devenir un peu plus sombre\n\n<b>Sombre:</b>\nEntourage sombre (projecteur)\nL'image va devenir plus sombre\n\n<b>Extrêmement sombre:</b>\nEntourage noir (transparents)\nL'image va devenir encore plus sombre
-TP_COLORAPP_SURSOURCE;Entourage sombre
-TP_COLORAPP_SURSOURCE_TOOLTIP;Peut être utilisé si l'image source a un bord noir.
 TP_COLORAPP_TCMODE_BRIGHTNESS;Brillance
 TP_COLORAPP_TCMODE_CHROMA;Chroma
 TP_COLORAPP_TCMODE_COLORF;Niveau de couleurs
@@ -1551,7 +1521,6 @@ TP_DEHAZE_SHOW_DEPTH_MAP;Montrer la Carte de Profondeur
 TP_DEHAZE_STRENGTH;Force
 TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Multi-zones auto
 TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Global automatique
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Essaie d'évaluer le bruit chroma\nFaites attention, cela calcul une moyenne, et est très subjectif !
 TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Bleu-Jaune
 TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Courbe de chrominance
 TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Augmente (multiplie) la valeur de tous les curseurs de chrominance.\nCette courbe vous permet d'ajuster la force de la réduction de bruit chromatique en fonction de la chromaticité, par exemple pour augmenter l'action dans les zones faiblement saturées et pour la diminuer dans celles très saturées.
@@ -1569,8 +1538,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Bruit de l'aperçu: Moyen=%1  Hau
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Bruit de l'aperçu: Moyen= -   Haut= -
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Taille des tuiles =%1, Centre: Tx=%2  Ty=%3
 TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Rouge-Vert
-TP_DIRPYRDENOISE_ENH;Mode amélioré
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Augmente la qualité du débruitage, mais augmente le temps de traitement d'environ 20%
 TP_DIRPYRDENOISE_LABEL;Réduction de Bruit
 TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Contrôle de luminance
 TP_DIRPYRDENOISE_LUMINANCE_CURVE;Courbe de luminance
@@ -1599,7 +1566,6 @@ TP_DIRPYRDENOISE_MEDIAN_PASSES;Itérations
 TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Appliquer trois itérations avec une taille de fenêtre de 3×3 aboutit souvent à de meilleurs résultats qu'une seule itération avec une taille de fenêtre de 7×7.
 TP_DIRPYRDENOISE_MEDIAN_TYPE;Type de médiane
 TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Applique un filtre médian de la taille de "fenêtre" désirée. Plus cette taille est grande, plus cela prendra de temps.\n\n3×3 doux: traite 5 pixels dans une fenêtre de 3×3 pixels.\n3×3: traite 9 pixels dans une fenêtre de 3×3 pixels.\n5×5 doux: traite 13 pixels dans une fenêtre de 5×5 pixels.\n5×5: traite 25 pixels dans une fenêtre de 5×5 pixels.\n7×7: traite 49 pixels dans une fenêtre de 7×7 pixels.\n9×9: traite 81 pixels dans une fenêtre 9×9 pixels.\n\nIl est parfois possible d'atteindre une meilleurs qualité en appliquant plusieurs itérations d'une petite fenêtre qu'une seule itération d'une grande.
-TP_DIRPYRDENOISE_SLI;Curseur
 TP_DIRPYRDENOISE_TYPE_3X3;3×3
 TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 doux
 TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1704,8 +1670,6 @@ TP_ICM_APPLYHUESATMAP;Table de base
 TP_ICM_APPLYHUESATMAP_TOOLTIP;Utilise la table de base (HueSatMap) contenu dans le profil DCP. Ce réglage n'est possible que si le profil DCP sélectionné en contient une.
 TP_ICM_APPLYLOOKTABLE;Table de correspondance
 TP_ICM_APPLYLOOKTABLE_TOOLTIP;Utilise la table de correspondance (LUT) contenu dans le profil DCP. Ce réglage n'est possible que si le profil DCP sélectionné en contient une.
-TP_ICM_BLENDCMSMATRIX;Mélange des hautes lumières\ndu profil ICC avec la matrice
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Activer la récupération des zones brûlées lorsque les profils ICC basés sur la LUT sont utilisés
 TP_ICM_BPC;Compensation du  Point Noir
 TP_ICM_DCPILLUMINANT;Illuminant
 TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolé
@@ -1831,7 +1795,6 @@ TP_RAWCACORR_AUTOIT_TOOLTIP;Ce réglage est disponible si "Correction-auto" est
 TP_RAWCACORR_AVOIDCOLORSHIFT;Éviter les dérives couleurs
 TP_RAWCACORR_CABLUE;Bleu
 TP_RAWCACORR_CARED;Rouge
-TP_RAWCACORR_CASTR;Force
 TP_RAWEXPOS_BLACKS;Niveaux de noir
 TP_RAWEXPOS_BLACK_0;Vert 1 (maître)
 TP_RAWEXPOS_BLACK_1;Rouge
@@ -1890,8 +1853,6 @@ TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Égalise la luminosité des sous-images à
 TP_RAW_PIXELSHIFTGREEN;Vérifier le canal vert pour le mouvement
 TP_RAW_PIXELSHIFTHOLEFILL;Rempli les trous dans le masque de mouvement
 TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Rempli les trous dans le masque de mouvement
-TP_RAW_PIXELSHIFTLMMSE;Utilise LMMSE pour les zone de mouvement
-TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Utilise LMMSE au lieu d'AMaZE pour les zone de mouvement.\nutil pour les images de haut ISO.
 TP_RAW_PIXELSHIFTMEDIAN;Utilise la médiane pour les zones de mouvement
 TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Utilise la médianes de toutes les sous-images au lieu de la sous-images sélectionnée pour les zones de mouvement.\nRetir les objets qui sont à des endroits différents dans toutes les sous-images.\nDonne un effet de mouvement aux objets se déplaçant lentement (se chevauchant).
 TP_RAW_PIXELSHIFTMM_AUTO;Automatique
@@ -1899,7 +1860,6 @@ TP_RAW_PIXELSHIFTMM_CUSTOM;Manuel
 TP_RAW_PIXELSHIFTMM_OFF;Arrêt
 TP_RAW_PIXELSHIFTMOTION;Niveau de détection de mouvement (dépréconisé)
 TP_RAW_PIXELSHIFTMOTIONMETHOD;Correction de Mouvement
-TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 signifie pas de détection de mouvement.\n1 - 99 signifie que le mouvement sera détecté par-rapport à cette valeur. Augmentez cette valeur pour augmenter le taux de détection.\n100 signifie que la sous-image sélectionnée et dématricée en AMaZE sera utilisée tel quel.
 TP_RAW_PIXELSHIFTNONGREENCROSS;Vérifier les canaux rouge/bleu pour le mouvement
 TP_RAW_PIXELSHIFTSHOWMOTION;Voir le masque de mouvement
 TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Voir uniquement le masque
@@ -1946,7 +1906,6 @@ TP_RETINEX_GAIN;Gain
 TP_RETINEX_GAINOFFS;Gain et Décalage (brillance)
 TP_RETINEX_GAINTRANSMISSION;Gain sur Transmission
 TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplifie ou réduit le canal transmission pour atteindre la luminance souhaitée.\nAbscisses: transmission ; min = 0, max = valeurs.\nOrdonnées: gain.
-TP_RETINEX_GAIN_TOOLTIP;Agit sur l'image recomposée.\n\nCeci est très différent des autres paramètres. Utilisé pour les pixels noirs et blancs, et pour aider à balancer l'histogramme.
 TP_RETINEX_GAMMA;Gamma
 TP_RETINEX_GAMMA_FREE;Manuel
 TP_RETINEX_GAMMA_HIGH;Haute
@@ -2024,10 +1983,8 @@ TP_SAVEDIALOG_OK_TIP;Raccourci: <b>Ctrl-Entrée</b>
 TP_SHADOWSHLIGHTS_HIGHLIGHTS;Hautes lumières
 TP_SHADOWSHLIGHTS_HLTONALW;Amplitude tonale des\nhautes lumières
 TP_SHADOWSHLIGHTS_LABEL;Ombres/Hautes lumières
-TP_SHADOWSHLIGHTS_LOCALCONTR;Contraste local
 TP_SHADOWSHLIGHTS_RADIUS;Rayon
 TP_SHADOWSHLIGHTS_SHADOWS;Ombres
-TP_SHADOWSHLIGHTS_SHARPMASK;Masque haute précision
 TP_SHADOWSHLIGHTS_SHTONALW;Amplitude tonale des ombres
 TP_SHARPENEDGE_AMOUNT;Quantité
 TP_SHARPENEDGE_LABEL;Bords

rtdata/languages/Italiano

@@ -75,7 +75,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Ignora i Passaggi di Miglioramento LMMSE
 EXPORT_BYPASS_SHARPENEDGE;Ignora Nitidezza dei bordi
 EXPORT_BYPASS_SHARPENING;Ignora Nitidezza
 EXPORT_BYPASS_SHARPENMICRO;Ignora Microcontrasto
-EXPORT_BYPASS_SH_HQ;Ignora Ombre/Alteluci (Alta Qualità)
 EXPORT_FASTEXPORTOPTIONS;<b>Opzioni di Esportazione Rapida</b>
 EXPORT_INSTRUCTIONS;Le opzioni di Esportazione Rapida forniscono opzioni per ignorare le impostazioni di sviluppo ad elevato consumo di tempo e risorse ed avviare quindi la coda di sviluppo usando solo le impostazioni veloci. Questo metodo è consigliato per la lavorazione veloce di immagini a bassa risoluzione quando è importante la rapidità, oppure quando si desidera ridimensionare una o più immagini senza apportare modifiche ai parametri di sviluppo salvati.
 EXPORT_MAXHEIGHT;Altezza Massima:
@@ -84,7 +83,6 @@ EXPORT_PUTTOQUEUEFAST; Aggiungi alla Coda di sviluppo per l'Esportazione Rapida
 EXPORT_RAW_DMETHOD;Metodo di Demosaicizzazione
 EXTPROGTARGET_1;raw
 EXTPROGTARGET_2;Lavorato dalla Coda
-FILEBROWSER_ADDDELTEMPLATE;Aggiungi/Rimuovi schemi...
 FILEBROWSER_APPLYPROFILE;Applica
 FILEBROWSER_APPLYPROFILE_PARTIAL;Applica (parziale)
 FILEBROWSER_AUTODARKFRAME;Dark Frame automatico
@@ -622,7 +620,6 @@ PREFERENCES_BEHADDALLHINT;Imposta tutti i parametri nella modalità <b>Somma</b>
 PREFERENCES_BEHAVIOR;Comportamento
 PREFERENCES_BEHSETALL;Tutti a 'Imposta'
 PREFERENCES_BEHSETALLHINT;Imposta tutti i parametri nella modalità <b>Imposta</b>.\nLe regolazioni dei parametri nel pannello strumenti batch saranno <b>assoluti</b>, verranno mostrati i valori reali.
-PREFERENCES_BLACKBODY;Tungsteno
 PREFERENCES_CACHEMAXENTRIES;Numero massimo di voci in memoria
 PREFERENCES_CACHEOPTS;Opzioni della memoria
 PREFERENCES_CACHETHUMBHEIGHT;Massima altezza delle miniature
@@ -633,10 +630,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Formato tasti
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Nome
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
 PREFERENCES_CUSTPROFBUILDPATH;Percorso dell'eseguibile
-PREFERENCES_D50;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
 PREFERENCES_DARKFRAMEFOUND;Trovati
 PREFERENCES_DARKFRAMESHOTS;fotogrammi
 PREFERENCES_DARKFRAMETEMPLATES;modelli
@@ -656,22 +649,10 @@ PREFERENCES_FLATFIELDFOUND;Trovati
 PREFERENCES_FLATFIELDSDIR;Cartella dei fotogrammi di campo (Flat Field)
 PREFERENCES_FLATFIELDSHOTS;fotogrammi
 PREFERENCES_FLATFIELDTEMPLATES;modelli
-PREFERENCES_FLUOF2;Fluorescente F2
-PREFERENCES_FLUOF7;Fluorescente F7
-PREFERENCES_FLUOF11;Fluorescente F11
 PREFERENCES_FORIMAGE;Per foto non raw
 PREFERENCES_FORRAW;Per foto raw
 PREFERENCES_GIMPPATH;Cartella d'installazione di GIMP
-PREFERENCES_GREY;Luminosità Yb del dispositivo di uscita (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
 PREFERENCES_HISTOGRAMPOSITIONLEFT;Istogramma nel pannello sinistro
-PREFERENCES_HISTOGRAMWORKING;Profilo di Lavoro per Istogramma e Navigatore
 PREFERENCES_HISTOGRAM_TOOLTIP;Se abilitato, Navigatore e Istogramma usano il Profilo di Lavoro anziché il Profilo di Uscita (con gamma)
 PREFERENCES_HLTHRESHOLD;Soglia per le alteluci tosate
 PREFERENCES_ICCDIR;Cartella profili colore
@@ -688,7 +669,6 @@ PREFERENCES_MENUGROUPLABEL;Raggruppa "Etichette Colore"
 PREFERENCES_MENUGROUPPROFILEOPERATIONS;Raggruppa "Operazioni sui profili"
 PREFERENCES_MENUGROUPRANK;Raggruppa "Classificazioni"
 PREFERENCES_MENUOPTIONS;Opzioni del menù a discesa
-PREFERENCES_METADATA;Metadati
 PREFERENCES_MULTITAB;Modalità a Schede Multiple
 PREFERENCES_MULTITABDUALMON;Modalità a Schede Multiple (se disponibile sul secondo schermo)
 PREFERENCES_OUTDIR;Cartella di destinazione
@@ -732,7 +712,6 @@ PREFERENCES_TAB_SOUND;Suoni
 PREFERENCES_TP_LABEL;Pannello Strumenti:
 PREFERENCES_TP_VSCROLLBAR;Nascondi la barra di scorrimento verticale
 PREFERENCES_USEBUNDLEDPROFILES;Usa profili inclusi
-PREFERENCES_VIEW;Bilanciamento del bianco del dispositivo di uscita (monitor, TV, proiettore...)
 PREFERENCES_WORKFLOW;Disposizione
 PROFILEPANEL_COPYPPASTE;Parametri da copiare
 PROFILEPANEL_GLOBALPROFILES;Profili inclusi
@@ -912,8 +891,6 @@ TP_COLORAPP_SURROUND_DARK;Scuro
 TP_COLORAPP_SURROUND_DIM;Fioco
 TP_COLORAPP_SURROUND_EXDARK;Estremamente Scuro (Pieghevole)
 TP_COLORAPP_SURROUND_TOOLTIP;Cambia toni e colori per tenere conto delle condizioni di visualizzazione del dispositivo di uscita\n\n<b>Medio:</b> Ambiente mediamente illuminato (standard)\nL'immagine non verrà modificata.\n\n<b>Fioco:</b> Ambiente fioco (TV)\nL'immagine diverrà leggermente più scura\n\n<b>Scuro:</b> Ambiente scuro (proiettore)\nL'immagine diventerà più scura\n\n<b>Estremamente Scuro:</b> Ambiente buio (Pieghevole)\nL'immagine diventerà molto più scura.
-TP_COLORAPP_SURSOURCE;Ambiente scuro
-TP_COLORAPP_SURSOURCE_TOOLTIP;Si può utilizzare nel caso in cui l'immagine abbia bordi scuri.
 TP_COLORAPP_TCMODE_BRIGHTNESS;Brillanza
 TP_COLORAPP_TCMODE_CHROMA;Croma
 TP_COLORAPP_TCMODE_COLORF;Pienezza
@@ -948,8 +925,6 @@ TP_DEFRINGE_THRESHOLD;Soglia
 TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Crominanza - Blu-Giallo
 TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Crominanza (Principale)
 TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Crominanza - Rosso-Verde
-TP_DIRPYRDENOISE_ENH;Modalità Migliorata
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Aumenta la qualità della riduzione rumore al costo di un incremento del 20% del tempo di elaborazione.
 TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Dettaglio di Luminanza
 TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminanza
 TP_DIRPYRDENOISE_MAIN_COLORSPACE;Metodo
@@ -1034,8 +1009,6 @@ TP_HSVEQUALIZER_HUE;H
 TP_HSVEQUALIZER_LABEL;Equalizzatore HSV
 TP_HSVEQUALIZER_SAT;S
 TP_HSVEQUALIZER_VAL;V
-TP_ICM_BLENDCMSMATRIX;Fonde le alteluci ICC con matrix
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Abilita per recuperare le alteluci bruciate quando usi profili ICC basati su LUT.
 TP_ICM_DCPILLUMINANT;Illuminazione
 TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolato
 TP_ICM_DCPILLUMINANT_TOOLTIP;Seleziona il DCP del tipo di illuminazione da utilizzare. Il predefinito è "interpolato", un mix tra i due basato sul bilanciamento del bianco. Questa impostazione è abilitata solo se è selezionato Doppia Illuminazione con supporto interpolato.
@@ -1162,10 +1135,8 @@ TP_SAVEDIALOG_OK_TIP;Scorciatoia: <b>Ctrl-Enter</b>
 TP_SHADOWSHLIGHTS_HIGHLIGHTS;Alteluci
 TP_SHADOWSHLIGHTS_HLTONALW;Ampiezza Tonale delle Alteluci
 TP_SHADOWSHLIGHTS_LABEL;Ombre/Alteluci
-TP_SHADOWSHLIGHTS_LOCALCONTR;Contrasto Locale
 TP_SHADOWSHLIGHTS_RADIUS;Raggio
 TP_SHADOWSHLIGHTS_SHADOWS;Ombre
-TP_SHADOWSHLIGHTS_SHARPMASK;Maschera di Nitidezza
 TP_SHADOWSHLIGHTS_SHTONALW;Ampiezza Tonale delle Ombre
 TP_SHARPENEDGE_AMOUNT;Quantità
 TP_SHARPENEDGE_LABEL;Bordi
@@ -1732,17 +1703,11 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: <b>-</b>
 !PREFERENCES_CURVEBBOXPOS_BELOW;Below
 !PREFERENCES_CURVEBBOXPOS_LEFT;Left
 !PREFERENCES_CURVEBBOXPOS_RIGHT;Right
-!PREFERENCES_D50_OLD;5000K
 !PREFERENCES_DIRECTORIES;Directories
 !PREFERENCES_EDITORCMDLINE;Custom command line
 !PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
 !PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
 !PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
 !PREFERENCES_INSPECT_LABEL;Inspect
 !PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
 !PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
@@ -1783,7 +1748,6 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: <b>-</b>
 !PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
 !PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
 !PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
 !PROFILEPANEL_PDYNAMIC;Dynamic
 !PROGRESSBAR_DECODING;Decoding...
 !PROGRESSBAR_GREENEQUIL;Green equilibration...
@@ -1889,7 +1853,6 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: <b>-</b>
 !TP_DEHAZE_STRENGTH;Strength
 !TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
 !TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
 !TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
 !TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
 !TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominance
@@ -1924,7 +1887,6 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: <b>-</b>
 !TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
 !TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
 !TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
 !TP_DIRPYRDENOISE_TYPE_3X3;3×3
 !TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
 !TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1998,7 +1960,6 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: <b>-</b>
 !TP_RAWCACORR_AUTOIT;Iterations
 !TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
 !TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CASTR;Strength
 !TP_RAWEXPOS_BLACK_0;Green 1 (lead)
 !TP_RAWEXPOS_BLACK_1;Red
 !TP_RAWEXPOS_BLACK_2;Blue
@@ -2044,15 +2005,12 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: <b>-</b>
 !TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
 !TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
 !TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
 !TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
 !TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
 !TP_RAW_PIXELSHIFTMM_AUTO;Automatic
 !TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
 !TP_RAW_PIXELSHIFTMM_OFF;Off
 !TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
 !TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
 !TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
 !TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -2087,7 +2045,6 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: <b>-</b>
 !TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
 !TP_RETINEX_GAINTRANSMISSION;Gain transmission
 !TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
 !TP_RETINEX_GAMMA;Gamma
 !TP_RETINEX_GAMMA_FREE;Free
 !TP_RETINEX_GAMMA_HIGH;High

rtdata/languages/Japanese

@@ -130,7 +130,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;[raw] LMMSE 拡張処理を迂回
 EXPORT_BYPASS_SHARPENEDGE;エッジ・シャープニングを迂回
 EXPORT_BYPASS_SHARPENING;シャープニングを迂回
 EXPORT_BYPASS_SHARPENMICRO;マイクロコントラストを迂回
-EXPORT_BYPASS_SH_HQ;シャドウ/ハイライト(高画質)を迂回
 EXPORT_FASTEXPORTOPTIONS;<b>高速書き出しオプション</b>
 EXPORT_INSTRUCTIONS;現像の設定に要する時間と手間を省くために、高速書き出しを優先させるオプションです。処理速度が優先される場合や、既定の現像パラメータを変えずに何枚ものリサイズ画像が要求される場合に奨められる方法で、低解像度画像を迅速に生成します。
 EXPORT_MAXHEIGHT;最大高:
@@ -143,7 +142,6 @@ EXPORT_USE_FAST_PIPELINE_TIP;処理速度を優先すると、処理は速くな
 EXPORT_USE_NORMAL_PIPELINE;標準(リサイズ処理は最後、幾つかの処理を迂回)
 EXTPROGTARGET_1;raw
 EXTPROGTARGET_2;キュー処理
-FILEBROWSER_ADDDELTEMPLATE;テンプレートの追加/削除...
 FILEBROWSER_APPLYPROFILE;プロファイルの適用
 FILEBROWSER_APPLYPROFILE_PARTIAL;プロファイルの適用 (一部)
 FILEBROWSER_AUTODARKFRAME;オート・ダークフレーム
@@ -1085,7 +1083,6 @@ PREFERENCES_BEHADDALLHINT;すべてのパラメータを <b>追加</b>モード
 PREFERENCES_BEHAVIOR;ビヘイビア
 PREFERENCES_BEHSETALL;すべて '設定'
 PREFERENCES_BEHSETALLHINT;すべてのパラメータを <b>設定</b>モードにします\nバッチツールパネルで設定される調整値が、各画像の既定値に取って代わり<b>同一</b>になります
-PREFERENCES_BLACKBODY;タングステン
 PREFERENCES_CACHECLEAR;クリア
 PREFERENCES_CACHECLEAR_ALL;cacheに入れられたファイルを全てクリア:
 PREFERENCES_CACHECLEAR_ALLBUTPROFILES;cacheに入れた処理プロファイル以外をクリア:
@@ -1116,11 +1113,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;キーフォーマット
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;名前
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;タグID
 PREFERENCES_CUSTPROFBUILDPATH;実行ファイルのパス
-PREFERENCES_D50;5000K
-PREFERENCES_D50_OLD;5000k
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
 PREFERENCES_DARKFRAMEFOUND;検出
 PREFERENCES_DARKFRAMESHOTS;ショット
 PREFERENCES_DARKFRAMETEMPLATES;テンプレート
@@ -1143,32 +1135,15 @@ PREFERENCES_FLATFIELDFOUND;検出
 PREFERENCES_FLATFIELDSDIR;フラットフィールド・ディレクトリ
 PREFERENCES_FLATFIELDSHOTS;ショット
 PREFERENCES_FLATFIELDTEMPLATES;テンプレート
-PREFERENCES_FLUOF2;蛍光灯 F2
-PREFERENCES_FLUOF7;蛍光灯 F7
-PREFERENCES_FLUOF11;蛍光灯 F11
 PREFERENCES_FORIMAGE;rawではない画像
 PREFERENCES_FORRAW;raw画像
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;ファイルブラウザと編集パネルのサムネイルのサイズを同じにする
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;サムネイルのサイズが異なると、編集パネルとファイルブラウザ間の切り替えで、余分な処理時間がかかります
 PREFERENCES_GIMPPATH;GIMP インストール ディレクトリ
-PREFERENCES_GREY;出力デバイスのYb輝度 (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;撮影時のYb輝度 (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;Ybを自動で計算
 PREFERENCES_HISTOGRAMPOSITIONLEFT;左パネルにヒストグラム
-PREFERENCES_HISTOGRAMWORKING;ヒストグラムとナビゲーターの表示に作業プロファイルを使う
 PREFERENCES_HISTOGRAM_TOOLTIP;これを有効にすると、ヒストグラムとナビゲーターの表示に、出力プロファイル（ガンマ適用）の代わりに作業プロファイルを使います
 PREFERENCES_HLTHRESHOLD;ハイライト・クリッピング領域のしきい値
 PREFERENCES_ICCDIR;カラープロファイルを含むディレクトリ
-PREFERENCES_IMG_RELOAD_NEEDED;これらの変更を有効にするには画像の再読み込みが必要です（或いは、新しい画像の読み込み）
 PREFERENCES_IMPROCPARAMS;画像処理のデフォルト値
 PREFERENCES_INSPECT_LABEL;カメラ出しJPEG
 PREFERENCES_INSPECT_MAXBUFFERS_LABEL;cacheに入れる画像の最大数
@@ -1187,7 +1162,6 @@ PREFERENCES_MENUGROUPLABEL;"カラーラベル"のグループ
 PREFERENCES_MENUGROUPPROFILEOPERATIONS;"処理プロファイル操作"のグループ
 PREFERENCES_MENUGROUPRANK;"ランキング"のグループ
 PREFERENCES_MENUOPTIONS;メニューオプションの状況
-PREFERENCES_METADATA;メタデータ
 PREFERENCES_MONINTENT;デフォルトのモニターインテント
 PREFERENCES_MONITOR;モニター
 PREFERENCES_MONPROFILE;デフォルトのモニタープロファイル
@@ -1263,9 +1237,7 @@ PREFERENCES_THUMBNAIL_INSPECTOR_RAW;ニュートラルなrawレンダリング
 PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;埋め込まれているJPEGがフルサイズの場合、指定がなければニュートラルなrawレンダリングで表示
 PREFERENCES_TP_LABEL;ツール パネル:
 PREFERENCES_TP_VSCROLLBAR;ツールパネルの垂直スクロールバーを隠す
-PREFERENCES_TUNNELMETADATA;Exif/IPTC/XMPを変更を加えずに出力ファイルにコピー
 PREFERENCES_USEBUNDLEDPROFILES;付属のプロファイルを使用
-PREFERENCES_VIEW;出力デバイスのホワイトバランス設定 (モニター, TV, プロジェクター,観視...)
 PREFERENCES_WORKFLOW;レイアウト
 PROFILEPANEL_COPYPPASTE;コピーするパラメータ
 PROFILEPANEL_GLOBALPROFILES;付属のプロファイル
@@ -1474,8 +1446,6 @@ TP_COLORAPP_SURROUND_DARK;暗い
 TP_COLORAPP_SURROUND_DIM;薄暗い
 TP_COLORAPP_SURROUND_EXDARK;非常に暗い (Cutsheet)
 TP_COLORAPP_SURROUND_TOOLTIP;トーンとカラーの変更は、出力デバイスの観視条件を計算に入れます\n\n<b>普通:</b>\n平均的な明るい環境 (標準)\n画像は変更されません\n\n<b>薄暗い:</b>\n薄暗い環境 (TV)\n画像は若干暗くなります\n\n<b>暗い:</b>\n暗い環境 (プロジェクター)\n画像はかなり暗くなります\n\n<b>非常に暗い:</b>\n非常に暗い環境 (Cutsheet)\n画像はとても暗くなります
-TP_COLORAPP_SURSOURCE;暗い周囲環境
-TP_COLORAPP_SURSOURCE_TOOLTIP;ソース画像が暗い周囲環境にある場合使用できます
 TP_COLORAPP_TCMODE_BRIGHTNESS;明るさ
 TP_COLORAPP_TCMODE_CHROMA;色度
 TP_COLORAPP_TCMODE_COLORF;鮮やかさ
@@ -1576,7 +1546,6 @@ TP_DEHAZE_SHOW_DEPTH_MAP;深度マップの表示
 TP_DEHAZE_STRENGTH;強さ
 TP_DIRPYRDENOISE_CHROMINANCE_AMZ;自動（多分割方式）
 TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;自動（分割方式）
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;色ノイズ低減の効果を確認して下さい\n注意：設定値の計算はあくまで平均的なもので、かなり主観的でです
 TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;色差 ブルー/イエロー
 TP_DIRPYRDENOISE_CHROMINANCE_CURVE;色ノイズ低減のカーブ
 TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;クロミナンススライダー全ての値を増幅します\n色度をベースにこのカーブで色ノイズ低減の強さを加減します。例えば彩度の低い部分で作用を強める、或いは色度の高い部分で作用を弱めるように使います
@@ -1594,8 +1563,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;プレビュー画像のノイズ
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;プレビュー画像のノイズ: 平均値= -   最大値= -
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;タイルのサイズ=%1, 中心位置: X座標=%2  Y座標=%3
 TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;色差 レッド/グリーン
-TP_DIRPYRDENOISE_ENH;強化モード
-TP_DIRPYRDENOISE_ENH_TOOLTIP;ノイズ低減の効果を髙めますが、代わりに演算時間が約20%増えます。
 TP_DIRPYRDENOISE_LABEL;ノイズ低減
 TP_DIRPYRDENOISE_LUMINANCE_CONTROL;輝度ノイズの調整法
 TP_DIRPYRDENOISE_LUMINANCE_CURVE;輝度カーブ
@@ -1624,7 +1591,6 @@ TP_DIRPYRDENOISE_MEDIAN_PASSES;フィルタリングの繰り返し回数
 TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;計算領域が3x3ピクセルのメディアンフィルタを3回繰り返し適用する方が、計算領域が7x7ピクセルのメディアンフィルタを1回適用するより結果が良くなることがままあります。
 TP_DIRPYRDENOISE_MEDIAN_TYPE;フィルターの種類
 TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;適用するメディアンフィルタのサイズを決めます。大きくするとその分処理時間が増えます。大きいサイズを使うとそれだけ処理時間が増えます。\n\n3×3 ソフト: 3x3ピクセルの計算領域で5ピクセルを処理します\n3×3:3x3ピクセルの計算領域で9ピクセルを処理します\n5×5 ソフト: 5x5ピクセルの計算領域で13ピクセルを処理します\n5×5: 5x5ピクセルの計算領域で25ピクセルを処理します\n7×7: 7x7ピクセルの計算領域で49ピクセルを処理します\n9×9: 9x9ピクセルの計算領域で81ピクセルを処理します\n\n場合によっては、小さいウィンドウで複数回適用を繰り返す方が、大きいウィンドウを1回適用するより結果が良いことがあります。
-TP_DIRPYRDENOISE_SLI;スライダー
 TP_DIRPYRDENOISE_TYPE_3X3;3×3
 TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 ソフト
 TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1729,8 +1695,6 @@ TP_ICM_APPLYHUESATMAP;ベーステーブル
 TP_ICM_APPLYHUESATMAP_TOOLTIP;DCPに埋め込まれているベーステーブル（色相彩度マップ）を用います。但し、適用するDCPにこのタグがある場合に限ります。
 TP_ICM_APPLYLOOKTABLE;ルックテーブル
 TP_ICM_APPLYLOOKTABLE_TOOLTIP;DCPに埋め込まれているルックテーブルを用います。但し、適用するDCPにこのタグがある場合に限ります。
-TP_ICM_BLENDCMSMATRIX;マトリクスとハイライト・ブレンド
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;LUTベースのICCプロファイルを使用するときに白トビを修復
 TP_ICM_BPC;ブラックポイント補正
 TP_ICM_DCPILLUMINANT;光源
 TP_ICM_DCPILLUMINANT_INTERPOLATED;補間
@@ -1856,7 +1820,6 @@ TP_RAWCACORR_AUTOIT_TOOLTIP;”自動補正”が有効になっている場合
 TP_RAWCACORR_AVOIDCOLORSHIFT;色ずれを回避
 TP_RAWCACORR_CABLUE;ブルー
 TP_RAWCACORR_CARED;レッド
-TP_RAWCACORR_CASTR;強さ
 TP_RAWEXPOS_BLACKS;黒レベル
 TP_RAWEXPOS_BLACK_0;グリーン1（先頭）
 TP_RAWEXPOS_BLACK_1;レッド
@@ -1914,15 +1877,12 @@ TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;選択した構成画像の明るさを他
 TP_RAW_PIXELSHIFTGREEN;振れに関するグリーンチャンネルを確認
 TP_RAW_PIXELSHIFTHOLEFILL;振れマスクの穴を埋める
 TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;振れマスクの穴を埋める
-TP_RAW_PIXELSHIFTLMMSE;振れのある領域にLMMSEを使用
-TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;振れのある領域にはAMaZEの代わりにLMMSEを使います。\nISO値が高い画像の処
 TP_RAW_PIXELSHIFTMEDIAN;振れのある領域にはメディアンを使用
 TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;振れのある領域に関しては、選択した画像ではなく全ての構成画像にメディアンを使います。\n全ての構成画像で異なる位置にある被写体は除きます。\n動きの遅い被写体（オーバーラッピング）には振れの効果が出ます。
 TP_RAW_PIXELSHIFTMM_AUTO;自動
 TP_RAW_PIXELSHIFTMM_CUSTOM;カスタム
 TP_RAW_PIXELSHIFTMM_OFF;オフ
 TP_RAW_PIXELSHIFTMOTIONMETHOD;振れ補正
-TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0は振れの検知が行われないことを意味します\n1 - 99は振れを検知する強さを意味します。値を増やすと検知率が上がります。\n100に設定するとAMaZEでデモザイクされた画像が使われます
 TP_RAW_PIXELSHIFTNONGREENCROSS;振れに関するレッド／ブルーのチャンネルを確認
 TP_RAW_PIXELSHIFTSHOWMOTION;振れマスクを含めて表示
 TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;振れマスクだけを表示
@@ -1969,7 +1929,6 @@ TP_RETINEX_GAIN;ゲイン
 TP_RETINEX_GAINOFFS;ゲインとオフセット(明るさ)
 TP_RETINEX_GAINTRANSMISSION;ゲインの透過
 TP_RETINEX_GAINTRANSMISSION_TOOLTIP;目標とする輝度を得るために、透過マップ増幅したり減衰させたりします。\n横軸：左から最小、平均、最大となります。\n縦軸：ゲイン
-TP_RETINEX_GAIN_TOOLTIP;修復画像に作用します\n\nこれは他の設定とは大きく異なります。 ブラックピクセルやホワイトピクセルに対して使う設定で、ヒストグラムのバランスを補正します
 TP_RETINEX_GAMMA;ガンマ
 TP_RETINEX_GAMMA_FREE;フリー
 TP_RETINEX_GAMMA_HIGH;高
@@ -2047,10 +2006,8 @@ TP_SAVEDIALOG_OK_TIP;ショートカット <b>Ctrl-Enter</b>
 TP_SHADOWSHLIGHTS_HIGHLIGHTS;ハイライトを暗く
 TP_SHADOWSHLIGHTS_HLTONALW;ハイライトトーンの幅
 TP_SHADOWSHLIGHTS_LABEL;シャドウ/ハイライト
-TP_SHADOWSHLIGHTS_LOCALCONTR;ローカルコントラスト
 TP_SHADOWSHLIGHTS_RADIUS;半径
 TP_SHADOWSHLIGHTS_SHADOWS;シャドウを明るく
-TP_SHADOWSHLIGHTS_SHARPMASK;シャープマスク
 TP_SHADOWSHLIGHTS_SHTONALW;シャドウトーンの幅
 TP_SHARPENEDGE_AMOUNT;適用量
 TP_SHARPENEDGE_LABEL;エッジ

rtdata/languages/Magyar

@@ -67,14 +67,12 @@ EXPORT_BYPASS_RAW_LINENOISE;[Raw] soronkénti zajszűrés kihagyása
 EXPORT_BYPASS_SHARPENEDGE;Élek élesítésének kihagyása
 EXPORT_BYPASS_SHARPENING;Élesítés kihagyása
 EXPORT_BYPASS_SHARPENMICRO;Mikrokontraszt kihagyása
-EXPORT_BYPASS_SH_HQ;(Kiváló minőségű) árnyékok/csúcsfények kihagyása
 EXPORT_FASTEXPORTOPTIONS;<b>Expressz exportálás beállításai</b>
 EXPORT_INSTRUCTIONS;Az expressz exportálás lehetővé teszi, hogy az idő- és erőforrás-igényes előhívási lépéseket kihagyd, és helyettük az expressz exportálás beállításait használd a feldolgozási sor lefuttatására. E megoldás kisebb felbontású képek gyors létrehozásához javasolt, ahol a sebesség az elsődleges, vagy ahol átméretezett képekre van szükség egyéb feldolgozási paramétereik módosítása nélkül.
 EXPORT_MAXHEIGHT;Maximum magasság: 
 EXPORT_MAXWIDTH;Maximum szélesség:  
 EXPORT_PUTTOQUEUEFAST;  Feldolgozási sorba helyezés expressz exportáláshoz
 EXPORT_RAW_DMETHOD;Interpoláció algoritmusa
-FILEBROWSER_ADDDELTEMPLATE;Sablon hozzáadása/törlése...
 FILEBROWSER_APPLYPROFILE;Feldolgozási paraméter hozzárendelése
 FILEBROWSER_APPLYPROFILE_PARTIAL;Profil alkalmazása (részleges)
 FILEBROWSER_AUTODARKFRAME;Auto referencia feketekép (dark frame)
@@ -515,7 +513,6 @@ PREFERENCES_MENUGROUPLABEL;Címkézés csoportosítása
 PREFERENCES_MENUGROUPPROFILEOPERATIONS;Profilműveletek csoportosítása
 PREFERENCES_MENUGROUPRANK;Értékelés csoportosítása
 PREFERENCES_MENUOPTIONS;Menübeállítások
-PREFERENCES_METADATA;Metaadatok
 PREFERENCES_MULTITAB;Több szerkesztőfül
 PREFERENCES_MULTITABDUALMON;Több fül mód második kijelzővel (ha elérhető)
 PREFERENCES_OUTDIR;Kimeneti alapértelmezett könyvtár
@@ -678,8 +675,6 @@ TP_HSVEQUALIZER_HUE;Színárnyalat
 TP_HSVEQUALIZER_LABEL;HSV Equalizer
 TP_HSVEQUALIZER_SAT;Színtelítettség
 TP_HSVEQUALIZER_VAL;Színérték
-TP_ICM_BLENDCMSMATRIX;Csúcsfények és mátrix egybemosása
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Kiégett csúcsfények helyrehozásának engedélyezése LUT-alapú ICC profilok használatánál
 TP_ICM_INPUTCAMERA;Fényképezőgép alapértelmezése
 TP_ICM_INPUTCAMERAICC;Fényképezőgép-specifikus színprofil
 TP_ICM_INPUTCAMERAICC_TOOLTIP;A RawTherapee saját, fényképezőgép-specifikus színprofiljainak használata bemeneti profilként. Ez a profil pontosabb az egyszerű  mátrixnál, és ha a fényképezőgéphez van elérhető színprofil az iccprofiles/input könyvtárban, akkor azt a RawTherapee a fényképezőgép típus és az állománynév pontos egyezése esetén automatikusan be fogja tölteni.
@@ -749,7 +744,6 @@ TP_ROTATE_SELECTLINE;    Vízszintes vonal kijelölése
 TP_SHADOWSHLIGHTS_HIGHLIGHTS;Csúcsfények
 TP_SHADOWSHLIGHTS_HLTONALW;Csúcsfények tónustartománya
 TP_SHADOWSHLIGHTS_LABEL;Árnyékok/Csúcsfények
-TP_SHADOWSHLIGHTS_LOCALCONTR;Lokális kontraszt
 TP_SHADOWSHLIGHTS_RADIUS;Sugár
 TP_SHADOWSHLIGHTS_SHADOWS;Árnyékok
 TP_SHADOWSHLIGHTS_SHTONALW;Árnyékok tónustartománya
@@ -1426,7 +1420,6 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés <b>-</b>
 !PREFERENCES_BEHADDALLHINT;Set all parameters to the <b>Add</b> mode.\nAdjustments of parameters in the batch tool panel will be <b>deltas</b> to the stored values.
 !PREFERENCES_BEHSETALL;All to 'Set'
 !PREFERENCES_BEHSETALLHINT;Set all parameters to the <b>Set</b> mode.\nAdjustments of parameters in the batch tool panel will be <b>absolute</b>, the actual values will be displayed.
-!PREFERENCES_BLACKBODY;Tungsten
 !PREFERENCES_CACHECLEAR;Clear
 !PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
 !PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
@@ -1456,34 +1449,12 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés <b>-</b>
 !PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys format
 !PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
 !PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
-!PREFERENCES_D50;Settings in main menu
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_D55;5500K
-!PREFERENCES_D60;6000K
-!PREFERENCES_D65;6500K
 !PREFERENCES_DIRECTORIES;Directories
 !PREFERENCES_EDITORCMDLINE;Custom command line
 !PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_FLUOF2;Fluorescent F2
-!PREFERENCES_FLUOF7;Fluorescent F7
-!PREFERENCES_FLUOF11;Fluorescent F11
 !PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
 !PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY;Output device's Yb luminance (%)
-!PREFERENCES_GREY05;Yb=05 CIE L#30
-!PREFERENCES_GREY10;Yb=10 CIE L#40
-!PREFERENCES_GREY15;Yb=15 CIE L#45
-!PREFERENCES_GREY18;Settings in main menu
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREY23;Yb=23 CIE L#55
-!PREFERENCES_GREY30;Yb=30 CIE L#60
-!PREFERENCES_GREY40;Yb=40 CIE L#70
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
 !PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
 !PREFERENCES_INSPECT_LABEL;Inspect
 !PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
 !PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
@@ -1525,9 +1496,7 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés <b>-</b>
 !PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
 !PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
 !PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
 !PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-!PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
 !PROFILEPANEL_GLOBALPROFILES;Bundled profiles
 !PROFILEPANEL_MODE_TIP;Processing profile fill mode.\n\nButton pressed: partial profiles will be converted to full profiles; the missing values will be replaced with hard-coded defaults.\n\nButton released: profiles will be applied as they are, altering only those values which they contain.
 !PROFILEPANEL_MYPROFILES;My profiles
@@ -1689,8 +1658,6 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés <b>-</b>
 !TP_COLORAPP_SURROUND_DIM;Dim
 !TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
 !TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\n<b>Average</b>: Average light environment (standard). The image will not change.\n\n<b>Dim</b>: Dim environment (TV). The image will become slighty dark.\n\n<b>Dark</b>: Dark environment (projector). The image will become more dark.\n\n<b>Extremly Dark</b>: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
 !TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
 !TP_COLORAPP_TCMODE_CHROMA;Chroma
 !TP_COLORAPP_TCMODE_COLORF;Colorfulness
@@ -1775,7 +1742,6 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés <b>-</b>
 !TP_DEHAZE_STRENGTH;Strength
 !TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
 !TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
 !TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
 !TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
 !TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
@@ -1792,8 +1758,6 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés <b>-</b>
 !TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= -   High= -
 !TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2  Ty=%3
 !TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
 !TP_DIRPYRDENOISE_LABEL;Noise Reduction
 !TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
 !TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
@@ -1820,7 +1784,6 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés <b>-</b>
 !TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
 !TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
 !TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
 !TP_DIRPYRDENOISE_TYPE_3X3;3×3
 !TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
 !TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1973,7 +1936,6 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés <b>-</b>
 !TP_RAWCACORR_AUTOIT;Iterations
 !TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
 !TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CASTR;Strength
 !TP_RAWEXPOS_BLACK_0;Green 1 (lead)
 !TP_RAWEXPOS_BLACK_1;Red
 !TP_RAWEXPOS_BLACK_2;Blue
@@ -2024,15 +1986,12 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés <b>-</b>
 !TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
 !TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
 !TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
 !TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
 !TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
 !TP_RAW_PIXELSHIFTMM_AUTO;Automatic
 !TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
 !TP_RAW_PIXELSHIFTMM_OFF;Off
 !TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
 !TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
 !TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
 !TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -2067,7 +2026,6 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés <b>-</b>
 !TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
 !TP_RETINEX_GAINTRANSMISSION;Gain transmission
 !TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
 !TP_RETINEX_GAMMA;Gamma
 !TP_RETINEX_GAMMA_FREE;Free
 !TP_RETINEX_GAMMA_HIGH;High
@@ -2134,7 +2092,6 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés <b>-</b>
 !TP_RGBCURVES_LUMAMODE;Luminosity mode
 !TP_RGBCURVES_LUMAMODE_TOOLTIP;<b>Luminosity mode</b> allows to vary the contribution of R, G and B channels to the luminosity of the image, without altering image color.
 !TP_SAVEDIALOG_OK_TIP;Shortcut: <b>Ctrl-Enter</b>
-!TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
 !TP_SHARPENING_BLUR;Blur radius
 !TP_SHARPENING_CONTRAST;Contrast threshold
 !TP_SHARPENMICRO_CONTRAST;Contrast threshold

rtdata/languages/Nederlands

@@ -102,7 +102,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;LMMSE Verbetering niet toeppassen [raw]
 EXPORT_BYPASS_SHARPENEDGE;Randen verscherpen niet toepassen
 EXPORT_BYPASS_SHARPENING;Verscherpen niet toepassen
 EXPORT_BYPASS_SHARPENMICRO;Microcontrast niet toepassen
-EXPORT_BYPASS_SH_HQ;Schaduwen/hoge lichten (Hoge kwaliteit) niet toepassen
 EXPORT_FASTEXPORTOPTIONS;<b>Opties Snelle Export</b>
 EXPORT_INSTRUCTIONS;Snel Exporteren biedt de mogelijkheid om gereedschappen uit te schakelen die veel tijd en rekenkracht vergen tijdens het converteren. Deze methode wordt aanbevolen om snel foto's in lagere resoluties aan te maken of wanneer de grootte moet worden aangepast voor één of meerdere afbeeldingen zonder de reeds opgeslagen ontwikkelinstellingen te wijzigen.
 EXPORT_MAXHEIGHT;Max. hoogte:
@@ -115,7 +114,6 @@ EXPORT_USE_FAST_PIPELINE_TIP;Gebruikt een speciale verwerkingslijn waarbij kwali
 EXPORT_USE_NORMAL_PIPELINE;Standaard (wijzigt formaat aan het eind)
 EXTPROGTARGET_1;raw
 EXTPROGTARGET_2;verwerkingsrij
-FILEBROWSER_ADDDELTEMPLATE;Voeg sjablonen toe of verwijder...
 FILEBROWSER_APPLYPROFILE;Pas profiel toe
 FILEBROWSER_APPLYPROFILE_PARTIAL;Pas profiel toe (gedeeltelijk)
 FILEBROWSER_AUTODARKFRAME;Automatisch donkerframe
@@ -904,7 +902,6 @@ PREFERENCES_BEHADDALLHINT;Zet alle parameters in de <b>Toevoegen</b> mode.\nWijz
 PREFERENCES_BEHAVIOR;Gedrag
 PREFERENCES_BEHSETALL;Alles op 'Activeer'
 PREFERENCES_BEHSETALLHINT;Zet alle parameters in de <b>Activeer</b> mode.\nWijzigingen van parameters in de batch tool zijn <b>absoluut</b>. De actuele waarden worden gebruikt.
-PREFERENCES_BLACKBODY;Tungsten(wolfraam)
 PREFERENCES_CACHEMAXENTRIES;Maximaal aantal elementen in cache
 PREFERENCES_CACHEOPTS;Cache-opties
 PREFERENCES_CACHETHUMBHEIGHT;Maximale hoogte miniaturen
@@ -924,10 +921,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys formaat
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Naam
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
 PREFERENCES_CUSTPROFBUILDPATH;Pad naar programma of script
-PREFERENCES_D50;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
 PREFERENCES_DARKFRAMEFOUND;Gevonden
 PREFERENCES_DARKFRAMESHOTS;foto's
 PREFERENCES_DARKFRAMETEMPLATES;sjablonen
@@ -947,31 +940,15 @@ PREFERENCES_FLATFIELDFOUND;Gevonden
 PREFERENCES_FLATFIELDSDIR;Vlakveldmap
 PREFERENCES_FLATFIELDSHOTS;foto's
 PREFERENCES_FLATFIELDTEMPLATES;sjablonen
-PREFERENCES_FLUOF2;Fluorescent F2
-PREFERENCES_FLUOF7;Fluorescent F7
-PREFERENCES_FLUOF11;Fluorescent F11
 PREFERENCES_FORIMAGE;Voor niet-RAW-bestanden
 PREFERENCES_FORRAW;Voor RAW-bestanden
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Zelfde hoogte miniaturen in Bewerkingsvenster en Bestandsnavigator
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Verschillende hoogtes voor miniaturen vereist meer verwerkingstijd wanneer je wisselt tussen Bewerkingsvenster en Bestandsnavigator
 PREFERENCES_GIMPPATH;Installatiemap GIMP
-PREFERENCES_GREY;Uitvoerapparaat's Yb luminantie (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;Omgeving Yb luminantie (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;Automatisch
 PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram in linkerpaneel
-PREFERENCES_HISTOGRAMWORKING;Gebruik het werkprofiel voor het Hoofdhistogram en de Navigator
 PREFERENCES_HISTOGRAM_TOOLTIP;Het werkprofiel wordt gebruikt voor het Hoofdhistogram en de Navigator. In alle andere gevallen wordt het gamma-gecorrigeerde uitvoerprofiel gebruikt.
 PREFERENCES_HLTHRESHOLD;Grenswaarde overbelichting
 PREFERENCES_ICCDIR;Map met ICC-profielen
-PREFERENCES_IMG_RELOAD_NEEDED;Deze wijzigingen vereisen dat de afbeelding wordt herladen (of dat een nieuwe afbeelding wordt geopend).
 PREFERENCES_IMPROCPARAMS;Standaardprofiel
 PREFERENCES_INSPECT_LABEL;Inspecteren
 PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum aantal afbeeldingen in cache
@@ -989,7 +966,6 @@ PREFERENCES_MENUGROUPLABEL;Groepeer labelen
 PREFERENCES_MENUGROUPPROFILEOPERATIONS;Groepeer profielbewerkingen
 PREFERENCES_MENUGROUPRANK;Groepeer markering
 PREFERENCES_MENUOPTIONS;Menu-opties
-PREFERENCES_METADATA;Metadata
 PREFERENCES_MONINTENT;Standaard monitor weergave
 PREFERENCES_MONITOR;Monitor
 PREFERENCES_MONPROFILE;Standaard kleurprofiel
@@ -1055,9 +1031,7 @@ PREFERENCES_TAB_IMPROC;Beeldverwerking
 PREFERENCES_TAB_SOUND;Geluiden
 PREFERENCES_TP_LABEL;Gereedschapspaneel:
 PREFERENCES_TP_VSCROLLBAR;Verberg de schuifbalk van het gereedschapspaneel
-PREFERENCES_TUNNELMETADATA;Kopieer Exif/IPTC/XMP-data onveranderd naar uitvoerbestand
 PREFERENCES_USEBUNDLEDPROFILES;Gebruik gebundelde profielen
-PREFERENCES_VIEW;Witbalans instelling van het uitvoerapparaat (monitor, TV, projector...)
 PREFERENCES_WORKFLOW;Layout
 PROFILEPANEL_COPYPPASTE;Te kopiëren parameters
 PROFILEPANEL_GLOBALPROFILES;Gebundelde profielen
@@ -1244,8 +1218,6 @@ TP_COLORAPP_SURROUND_DARK;Donker
 TP_COLORAPP_SURROUND_DIM;Gedimd
 TP_COLORAPP_SURROUND_EXDARK;Duister
 TP_COLORAPP_SURROUND_TOOLTIP;Verander tonen en kleuren rekening houdend met de weergaveomstandigheden van het uitvoerapparaat\n\n<b>Gemiddeld:</b>\nGemiddeld verlichte omgeving (standaard)\nDe afbeelding zal niet veranderen \n\n<b>Gedimd:</b>\nGedimde omgeving (TV)\nDe afbeelding zal enigszins donkerder worden\n\n<b>Donker:</b>\nDonkere omgeving (projector)\nDe afbeelding zal veel donkerder worden\n\n<b>Duister:</b>\nDuistere omgeving\nDe afbeelding zal zeer donker worden
-TP_COLORAPP_SURSOURCE;Donkere omgeving
-TP_COLORAPP_SURSOURCE_TOOLTIP;Kan worden gebruikt als de foto is gemaakt in een donkere omgeving
 TP_COLORAPP_TCMODE_BRIGHTNESS;Helderheid
 TP_COLORAPP_TCMODE_CHROMA;Chroma
 TP_COLORAPP_TCMODE_COLORF;Kleurrijkheid
@@ -1318,7 +1290,6 @@ TP_DEFRINGE_RADIUS;Straal
 TP_DEFRINGE_THRESHOLD;Drempel
 TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zone
 TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatisch algemeen
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Probeert chroma ruis te bepalen\nWees voorzichtig, deze berekening is een gemiddelde en kan subjectief zijn!
 TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominantie Blauw & Geel
 TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominantie curve
 TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominantie
@@ -1335,8 +1306,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Voorbeeld ruis: Gemiddeld=%1  Hoo
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Voorbeeld ruis: Gemiddeld= -   Hoog= -
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tegel grootte=%1, Centrum: Tx=%2  Ty=%3
 TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominantie Rood & Groen
-TP_DIRPYRDENOISE_ENH;Verbeteren
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Verbetert de ruisonderdrukking, maar vergroot de verwerkingstijd met ongeveer 20%
 TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Type gereedschap
 TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminantie curve
 TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Luminantie Detail
@@ -1364,7 +1333,6 @@ TP_DIRPYRDENOISE_MEDIAN_PASSES;Mediaan herhalingen
 TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Het gebruik van drie mediaan filter herhalingen met een 3×3 venster grootte geeft meestal een beter resultaat dan het gebruik van één mediaan filter herhaling met eeen 7×7 venster grootte.
 TP_DIRPYRDENOISE_MEDIAN_TYPE;Type
 TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Gebruik een mediaan filter van gewenste venster grootte. Hoe groter het venster hoe langer het duurt.\n\n3×3 zacht: behandeld 5 pixels in een 3×3 pixel venster.\n3×3: behandeld 9 pixels in een 3×3 pixel venster.\n5×5 zacht: behandeld 13 pixels in een 5×5 pixel venster.\n5×5: behandeld 25 pixels in een 5×5 pixel venster.\n7×7: behandeld 49 pixels in een 7×7 pixel venster.\n9×9: behandeld 81 pixels in a 9×9 pixel venster.\n\nSoms is het mogelijk om een betere kwaliteit te krijgen door het uitvoeren van meerdere herhalingen met een kleiner venster dan één uitvoering met een groter venster.
-TP_DIRPYRDENOISE_SLI;Schuifbalk
 TP_DIRPYRDENOISE_TYPE_3X3;3×3
 TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 zacht
 TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1467,8 +1435,6 @@ TP_ICM_APPLYHUESATMAP;DCP basis tabel
 TP_ICM_APPLYHUESATMAP_TOOLTIP;Gebruik de ingebedde DCP basis tabel (HueSatMap). De instelling is allen actief als de DCP een basis tabel heeft.
 TP_ICM_APPLYLOOKTABLE;DCP 'look' tabel
 TP_ICM_APPLYLOOKTABLE_TOOLTIP;Gebruik de ingebedde DCP 'look' tabel. De instelling is allen actief als de DCP een looktable heeft.
-TP_ICM_BLENDCMSMATRIX;Meng hoge lichten met matrix
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Activeer om uitgebeten hoge lichten te herstellen wanneer op LUT gebaseerde ICC-profielen worden gebruikt.
 TP_ICM_BPC;Zwartpunt Compensatie
 TP_ICM_DCPILLUMINANT;Illuminant
 TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpoleren
@@ -1566,7 +1532,6 @@ TP_PRSHARPENING_TOOLTIP;Verscherp na verkleinen. Werkt alleen als verkleinen act
 TP_RAWCACORR_AUTO;Automatische CA-correctie
 TP_RAWCACORR_CABLUE;Blauw
 TP_RAWCACORR_CARED;Rood
-TP_RAWCACORR_CASTR;Sterkte
 TP_RAWEXPOS_BLACKS;Zwartniveaus
 TP_RAWEXPOS_BLACK_0;Groen 1 (leidend)
 TP_RAWEXPOS_BLACK_1;Rood
@@ -1610,8 +1575,6 @@ TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Balanseer de helderheid van de frames t.o.v
 TP_RAW_PIXELSHIFTGREEN;Controleer groene kanaal voor beweging
 TP_RAW_PIXELSHIFTHOLEFILL;Vul holtes in verschuivingsmasker
 TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Vul holtes in het verschuivingsmasker op
-TP_RAW_PIXELSHIFTLMMSE;Gebruik lmmse voor verschoven gebieden
-TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Gebruik lmmse ipv amaze voor verschoven gebieden.\nNuttig voor hoge ISO afbeeeldingen.
 TP_RAW_PIXELSHIFTMEDIAN;Mediaan
 TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Gebruik mediaan voor alle frames inplaats van  alleen het geselecteerd frame voor gebieden met beweging.\nVerwijder objecten die voorkomen op verschillende plekken in alle frames.\nGeeft bewegingseffect voor langzaam bewegende (overlappende) objecten.
 TP_RAW_PIXELSHIFTMM_AUTO;Automatisch
@@ -1619,7 +1582,6 @@ TP_RAW_PIXELSHIFTMM_CUSTOM;Eigen
 TP_RAW_PIXELSHIFTMM_OFF;Uit
 TP_RAW_PIXELSHIFTMOTION;Beweging detectie niveau (vervallen)
 TP_RAW_PIXELSHIFTMOTIONMETHOD;Beweging Correctie
-TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0: geen bewegingsdetectie\n1 - 99: beweging wordt bepaald op basis van deze waarde. Vergroot de waarde om de bewegingsdetectie te verhogen\n100: Amaze demozaïek wordt gebruikt
 TP_RAW_PIXELSHIFTNONGREENCROSS;Controleer rood/blauw kanaal voor beweging
 TP_RAW_PIXELSHIFTSHOWMOTION;Toon beweging
 TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Toon alleen masker
@@ -1658,7 +1620,6 @@ TP_RETINEX_CURVEEDITOR_MAP_TOOLTIP;Deze curve kan zowel alleen worden gebruikt o
 TP_RETINEX_EQUAL;Mixer
 TP_RETINEX_FREEGAMMA;Vrij gamma
 TP_RETINEX_GAIN;Verbeteren
-TP_RETINEX_GAIN_TOOLTIP;Wijzigt de aangepaste afbeelding.\n\nDit wijkt af van de andere instellingen. Wordt gebruikt voor zwarte of witte pixels, en om het histogram te balanceren.
 TP_RETINEX_GAMMA;Gamma
 TP_RETINEX_GAMMA_FREE;Vrij
 TP_RETINEX_GAMMA_HIGH;Hoog
@@ -1735,10 +1696,8 @@ TP_SAVEDIALOG_OK_TIP;Sneltoets: <b>Ctrl-Enter</b>
 TP_SHADOWSHLIGHTS_HIGHLIGHTS;Hoge lichten
 TP_SHADOWSHLIGHTS_HLTONALW;Toonomvang
 TP_SHADOWSHLIGHTS_LABEL;Schaduwen/hoge lichten
-TP_SHADOWSHLIGHTS_LOCALCONTR;Lokaal contrast
 TP_SHADOWSHLIGHTS_RADIUS;Straal
 TP_SHADOWSHLIGHTS_SHADOWS;Schaduwen
-TP_SHADOWSHLIGHTS_SHARPMASK;Verscherpingsmasker
 TP_SHADOWSHLIGHTS_SHTONALW;Toonomvang
 TP_SHARPENEDGE_AMOUNT;Hoeveelheid
 TP_SHARPENEDGE_LABEL;Randen
@@ -2193,11 +2152,9 @@ ZOOMPANEL_ZOOMOUT;Zoom uit\nSneltoets: <b>-</b>
 !PREFERENCES_CROP_GUIDES_FRAME;Frame
 !PREFERENCES_CROP_GUIDES_FULL;Original
 !PREFERENCES_CROP_GUIDES_NONE;None
-!PREFERENCES_D50_OLD;5000K
 !PREFERENCES_DIRECTORIES;Directories
 !PREFERENCES_EDITORCMDLINE;Custom command line
 !PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
 !PREFERENCES_LANG;Language
 !PREFERENCES_PERFORMANCE_MEASURE;Measure
 !PREFERENCES_PERFORMANCE_MEASURE_HINT;Logs processing times in console

rtdata/languages/Polish

@@ -79,7 +79,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Pomiń poprawę LMMSE [raw]
 EXPORT_BYPASS_SHARPENEDGE;Pomiń wyostrzanie krawędzi
 EXPORT_BYPASS_SHARPENING;Pomiń wyostrzanie
 EXPORT_BYPASS_SHARPENMICRO;Pomiń mikrokontrast
-EXPORT_BYPASS_SH_HQ;Pomiń wysokiej jakości korekte cieni/podświetleń
 EXPORT_FASTEXPORTOPTIONS;<b>Opcje szybkiego eksportu</b>
 EXPORT_INSTRUCTIONS;Opcje szybkiego eksportu umożliwiają pominięcie pewnych narzędzi które mogą być dość wymagające na procesor oraz mogą znacznie przedłużyc czas przetwarzania podczas eksportowania zdjęć. Ta metoda jest zalecana w razie potrzeby szybkiego uzyskania zdjęć o niższej rozdzielczości oraz jakości kiedy zależy nam na czasie a nie chcemy modyfikować plików PP3.
 EXPORT_MAXHEIGHT;Maksymalna wysokość:
@@ -88,7 +87,6 @@ EXPORT_PUTTOQUEUEFAST;  Dodaj do kolejki szybkiego eksportu
 EXPORT_RAW_DMETHOD;Algorytm demozaikowania
 EXTPROGTARGET_1;raw
 EXTPROGTARGET_2;wywołane w kolejce
-FILEBROWSER_ADDDELTEMPLATE;Dodaj/Usuń szablon...
 FILEBROWSER_APPLYPROFILE;Zastosuj profil
 FILEBROWSER_APPLYPROFILE_PARTIAL;Zastosuj częściowy profil
 FILEBROWSER_AUTODARKFRAME;Automatyczne użycie czarnej klatki
@@ -671,7 +669,6 @@ PREFERENCES_BEHADDALLHINT;Ustaw wszystkie narzędzia w tryb <b>Dodaj</b>.\nZmian
 PREFERENCES_BEHAVIOR;Zachowanie
 PREFERENCES_BEHSETALL;'Ustaw' wszystkie
 PREFERENCES_BEHSETALLHINT;Ustaw wszystkie narzędzia w tryb <b>Ustaw</b>.\nZmiany parametrów w panelu edycji zbiorczej zostaną traktowane jako <b>absolutne</b>, nie biorąc pod uwagę poprzednich wartości.
-PREFERENCES_BLACKBODY;Wolfram
 PREFERENCES_CACHEMAXENTRIES;Maksymalna liczba wpisów w pamięci podręcznej
 PREFERENCES_CACHEOPTS;Opcje pamięci podręcznej
 PREFERENCES_CACHETHUMBHEIGHT;Maksymalna wysokość miniatury
@@ -683,10 +680,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Rodzaj kluczy
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Nazwa
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
 PREFERENCES_CUSTPROFBUILDPATH;Ścieżka pliku wykonywalnego
-PREFERENCES_D50;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
 PREFERENCES_DARKFRAMEFOUND;Znaleziono
 PREFERENCES_DARKFRAMESHOTS;zdjęć(ia)
 PREFERENCES_DARKFRAMETEMPLATES;szablonów(ny)
@@ -706,22 +699,10 @@ PREFERENCES_FLATFIELDFOUND;Znaleziono
 PREFERENCES_FLATFIELDSDIR;Katalog z pustymi polami
 PREFERENCES_FLATFIELDSHOTS;kadry
 PREFERENCES_FLATFIELDTEMPLATES;szablony
-PREFERENCES_FLUOF2;Fluorescent F2
-PREFERENCES_FLUOF7;Fluorescent F7
-PREFERENCES_FLUOF11;Fluorescent F11
 PREFERENCES_FORIMAGE;Dla zdjęć innych niż raw
 PREFERENCES_FORRAW;Dla zdjęć raw
 PREFERENCES_GIMPPATH;Katalog, w którym zainstalowany jest GIMP
-PREFERENCES_GREY;Luminancja Yb urządzenia wyjściowego (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
 PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram w lewym panelu
-PREFERENCES_HISTOGRAMWORKING;Zastosuj profil roboczy do obliczenia głównego histogramu i Nawigatora
 PREFERENCES_HISTOGRAM_TOOLTIP;Jeśli opcja jest włączona profil roboczy jest użyty do obliczenia głównego histogramu oraz panelu Nawigatora, inaczej profil wyjściowy z korektą gamma zostanie użyty.
 PREFERENCES_HLTHRESHOLD;Próg dla prześwietleń
 PREFERENCES_ICCDIR;Katalog z profilami koloru ICC
@@ -738,7 +719,6 @@ PREFERENCES_MENUGROUPLABEL;Grupuj operacje etykiet
 PREFERENCES_MENUGROUPPROFILEOPERATIONS;Grupuj operacje profili przetwarzania
 PREFERENCES_MENUGROUPRANK;Grupuj operacje oceny
 PREFERENCES_MENUOPTIONS;Opcje menu
-PREFERENCES_METADATA;Metadane
 PREFERENCES_MULTITAB;Tryb wielu zakładek
 PREFERENCES_MULTITABDUALMON;Tryb wielu zakładek (na drugim monitorze jeśli dostępny)
 PREFERENCES_OUTDIR;Katalog wyjściowy
@@ -782,7 +762,6 @@ PREFERENCES_TAB_SOUND;Dźwięki
 PREFERENCES_TP_LABEL;Panel narzędzi:
 PREFERENCES_TP_VSCROLLBAR;Ukry pionowy pasek przesuwania
 PREFERENCES_USEBUNDLEDPROFILES;Użyj załączone profile przetwarzania
-PREFERENCES_VIEW;Balans bieli urządzenia wyjściowego (monitora, TV, projektora, widowni, etc.)
 PREFERENCES_WORKFLOW;Tok pracy
 PROFILEPANEL_COPYPPASTE;Parametry do skopiowania
 PROFILEPANEL_GLOBALPROFILES;Załączone profile przetwarzania
@@ -962,8 +941,6 @@ TP_COLORAPP_SURROUND_DARK;Ciemne
 TP_COLORAPP_SURROUND_DIM;Przyćmione
 TP_COLORAPP_SURROUND_EXDARK;Bardzo Ciemne (Cut-sheet)
 TP_COLORAPP_SURROUND_TOOLTIP;Zmienia barwy i kolory aby wziąć pod uwagę własności widowni urządzenia wyjściowego.\n\n<b>Średnie</b>:\nŚrednie światło otoczenia (standardowe). Obraz się nie zmieni.\n\n<b>Przyćmione</b>:\nPrzyćmione otoczenie (TV). Obraz stanie się troszkę ciemniejszy.\n\n<b>Ciemne</b>:\nCiemne otoczenie (projektor). Obraz stanie się jeszczę ciemniejszy.\n\n<b>Bardzo Ciemne</b>:\nBardzo ciemne otoczenie (cut-sheet). Obraz stanie się bardzo ciemny.
-TP_COLORAPP_SURSOURCE;Ciemne otoczenie
-TP_COLORAPP_SURSOURCE_TOOLTIP;Można użyć kiedy np. obraz wejściowy ma ciemne krawędzie.
 TP_COLORAPP_TCMODE_BRIGHTNESS;Jasność
 TP_COLORAPP_TCMODE_CHROMA;Chroma
 TP_COLORAPP_TCMODE_COLORF;Barwistość
@@ -1034,8 +1011,6 @@ TP_DEFRINGE_THRESHOLD;Próg
 TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominancja - Błękit-żółć
 TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Chrominancja - Główna
 TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominancja - Czerwień-zieleń
-TP_DIRPYRDENOISE_ENH;Tryb ulepszony
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Ulepsza jakość usuwania szumów kosztem około 20% wzrostu czasu przetwarzania.
 TP_DIRPYRDENOISE_LUMINANCE_CURVE;Krzywa luminancji
 TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Szczegółowość luminancji
 TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminacja
@@ -1140,8 +1115,6 @@ TP_HSVEQUALIZER_HUE;H
 TP_HSVEQUALIZER_LABEL;Ekwalizator HSV
 TP_HSVEQUALIZER_SAT;S
 TP_HSVEQUALIZER_VAL;V
-TP_ICM_BLENDCMSMATRIX;Tłumienie prześwietleń danymi z matrycy
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Włącz odzyskiwanie prześwietlonych regionow jesli profil ICC wykorzystuje LUT (tablicowanie).
 TP_ICM_DCPILLUMINANT;Iluminant
 TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolowany
 TP_ICM_DCPILLUMINANT_TOOLTIP;Wybierz który osadzony iluminant DCP należy użyć. Domyślną opcją jest "interpolowany", czyli wartość jest mieszaniną pomiędzy dwoma osadzonymi wartościami iluminantu zależnie od balansu bieli. Ten wybór jest możliwy jedynie kiedy DCP zawiera dwa iluminanty z możliwościa interpolacji.
@@ -1283,10 +1256,8 @@ TP_SAVEDIALOG_OK_TIP;Skrót: <b>Ctrl-Enter</b>
 TP_SHADOWSHLIGHTS_HIGHLIGHTS;Podświetlenia
 TP_SHADOWSHLIGHTS_HLTONALW;Szerokość tonalna
 TP_SHADOWSHLIGHTS_LABEL;Cienie/Podświetlenia
-TP_SHADOWSHLIGHTS_LOCALCONTR;Kontrast lokalny
 TP_SHADOWSHLIGHTS_RADIUS;Promień
 TP_SHADOWSHLIGHTS_SHADOWS;Cienie
-TP_SHADOWSHLIGHTS_SHARPMASK;Ostra maska
 TP_SHADOWSHLIGHTS_SHTONALW;Szerokość tonalna
 TP_SHARPENEDGE_AMOUNT;Siła
 TP_SHARPENEDGE_LABEL;Krawędzie
@@ -1808,17 +1779,11 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: <b>-</b>
 !PREFERENCES_CURVEBBOXPOS_BELOW;Below
 !PREFERENCES_CURVEBBOXPOS_LEFT;Left
 !PREFERENCES_CURVEBBOXPOS_RIGHT;Right
-!PREFERENCES_D50_OLD;5000K
 !PREFERENCES_DIRECTORIES;Directories
 !PREFERENCES_EDITORCMDLINE;Custom command line
 !PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
 !PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
 !PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
 !PREFERENCES_INSPECT_LABEL;Inspect
 !PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
 !PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
@@ -1859,7 +1824,6 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: <b>-</b>
 !PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
 !PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
 !PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
 !PROFILEPANEL_PDYNAMIC;Dynamic
 !PROGRESSBAR_DECODING;Decoding...
 !PROGRESSBAR_GREENEQUIL;Green equilibration...
@@ -1929,7 +1893,6 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: <b>-</b>
 !TP_DEHAZE_STRENGTH;Strength
 !TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
 !TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
 !TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
 !TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
 !TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominance
@@ -1952,7 +1915,6 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: <b>-</b>
 !TP_DIRPYRDENOISE_MEDIAN_METHOD_WEIGHTED;Weighted L* (little) + a*b* (normal)
 !TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
 !TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
 !TP_DIRPYRDENOISE_TYPE_3X3;3×3
 !TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
 !TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -2015,7 +1977,6 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: <b>-</b>
 !TP_RAWCACORR_AUTOIT;Iterations
 !TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
 !TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CASTR;Strength
 !TP_RAW_1PASSMEDIUM;1-pass (Markesteijn)
 !TP_RAW_2PASS;1-pass+fast
 !TP_RAW_3PASSBEST;3-pass (Markesteijn)
@@ -2053,15 +2014,12 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: <b>-</b>
 !TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
 !TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
 !TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
 !TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
 !TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
 !TP_RAW_PIXELSHIFTMM_AUTO;Automatic
 !TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
 !TP_RAW_PIXELSHIFTMM_OFF;Off
 !TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
 !TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
 !TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
 !TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -2093,7 +2051,6 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: <b>-</b>
 !TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
 !TP_RETINEX_GAINTRANSMISSION;Gain transmission
 !TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
 !TP_RETINEX_GAMMA;Gamma
 !TP_RETINEX_GAMMA_FREE;Free
 !TP_RETINEX_GAMMA_HIGH;High

rtdata/languages/Portugues

@@ -98,7 +98,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Ignorar etapas de melhoramento LMMSE [raw]
 EXPORT_BYPASS_SHARPENEDGE;Ignorar nitidez das bordas
 EXPORT_BYPASS_SHARPENING;Ignorar nitidez
 EXPORT_BYPASS_SHARPENMICRO;Ignorar microcontraste
-EXPORT_BYPASS_SH_HQ;Ignorar sombras/altas luzes da máscara de nitidez
 EXPORT_FASTEXPORTOPTIONS;<b>Opções de exportação rápida</b>
 EXPORT_INSTRUCTIONS;As opções de exportação rápida fornecem substituições para poupar tempo e recursos consumidos no desenvolvimento de configurações e na execução do processamento de filas utilizando configurações de exportação rápida. Este método é recomendado para gerar rapidamente imagens de baixa resolução, quando a velocidade é uma prioridade ou quando se quer uma saída redimensionada para uma ou mais imagens sem fazer alterações nos parâmetros de desenvolvimento guardados.
 EXPORT_MAXHEIGHT;Altura máxima:
@@ -111,7 +110,6 @@ EXPORT_USE_FAST_PIPELINE_TIP;Usar uma preparação de processamento dedicado par
 EXPORT_USE_NORMAL_PIPELINE;Padrão (ignorar algumas etapas, redimensionar no fim)
 EXTPROGTARGET_1;raw
 EXTPROGTARGET_2;processado na fila
-FILEBROWSER_ADDDELTEMPLATE;Adicionar/eliminar modelos...
 FILEBROWSER_APPLYPROFILE;Aplicar
 FILEBROWSER_APPLYPROFILE_PARTIAL;Aplicar - parcial
 FILEBROWSER_AUTODARKFRAME;Fotograma escuro automático
@@ -1052,7 +1050,6 @@ PREFERENCES_BEHADDALLHINT;Definir todos os parâmetros para o modo <b>adicionar<
 PREFERENCES_BEHAVIOR;Comportamento
 PREFERENCES_BEHSETALL;Tudo para 'aplicar'
 PREFERENCES_BEHSETALLHINT;Definir todos os parâmetros para o modo <b>aplicar</b>.\nOs ajustes dos parâmetros no painel de ferramentas em lote serão <b>absolutos</b>, serão mostrados os valores reais.
-PREFERENCES_BLACKBODY;Tungsténio
 PREFERENCES_CACHECLEAR;Eliminar
 PREFERENCES_CACHECLEAR_ALL;Eliminar todos os ficheiros em cache:
 PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Eliminar todos os ficheiros em cache excepto os perfis de processamento em cache:
@@ -1089,11 +1086,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Formato das chaves
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Nome
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;Identificador da etiqueta
 PREFERENCES_CUSTPROFBUILDPATH;Caminho do executável
-PREFERENCES_D50;Configurações no menu principal
-PREFERENCES_D50_OLD;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
 PREFERENCES_DARKFRAMEFOUND;Encontrado
 PREFERENCES_DARKFRAMESHOTS;disparos
 PREFERENCES_DARKFRAMETEMPLATES;modelos
@@ -1116,32 +1108,15 @@ PREFERENCES_FLATFIELDFOUND;Encontrado
 PREFERENCES_FLATFIELDSDIR;Pasta de campos planos
 PREFERENCES_FLATFIELDSHOTS;disparos
 PREFERENCES_FLATFIELDTEMPLATES;modelos
-PREFERENCES_FLUOF2;Fluorescente F2
-PREFERENCES_FLUOF7;Fluorescente F7
-PREFERENCES_FLUOF11;Fluorescente F11
 PREFERENCES_FORIMAGE;Para fotos não-raw
 PREFERENCES_FORRAW;Para fotos raw
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Usar a mesma altura das miniaturas na película de fotografias e no navegador de ficheiros
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Se os tamanhos das miniaturas forem diferentes levará mais tempo a processá-las todas as vezes que se mudar entre a aba do editor e do navegador de ficheiros.
 PREFERENCES_GIMPPATH;Pasta de instalação do GIMP
-PREFERENCES_GREY;Luminância Yb do dispositivo de saída (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Configurações no menu principal
-PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;Luminância Yb da cena (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;Automático
 PREFERENCES_HISTOGRAMPOSITIONLEFT;Histograma no painel esquerdo
-PREFERENCES_HISTOGRAMWORKING;Usar o perfil de trabalho para o histograma principal e o navegador
 PREFERENCES_HISTOGRAM_TOOLTIP;<b>Ativado</b>: é usado o perfil de trabalho para renderizar o painel histograma principal e o painel navegador.\n<b>Desativado</b>: é usado o perfil de saída com gama corrigida.
 PREFERENCES_HLTHRESHOLD;Limite para altas luzes cortadas
 PREFERENCES_ICCDIR;Pasta com os perfis de cores
-PREFERENCES_IMG_RELOAD_NEEDED;Para que estas alterações surtam efeito é necessário recarregar a imagem ou que uma nova imagem seja aberta.
 PREFERENCES_IMPROCPARAMS;Perfil de processamento padrão
 PREFERENCES_INSPECT_LABEL;Inspecionar
 PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Número máximo de imagens em cache
@@ -1160,7 +1135,6 @@ PREFERENCES_MENUGROUPLABEL;Grupo "Etiqueta de cor"
 PREFERENCES_MENUGROUPPROFILEOPERATIONS;Grupo "Operações de perfil de processamento"
 PREFERENCES_MENUGROUPRANK;Grupo "Classificação"
 PREFERENCES_MENUOPTIONS;Agrupar opções no menu de contexto (necessário reiniciar)
-PREFERENCES_METADATA;Metadados
 PREFERENCES_MONINTENT;Intenção de renderização padrão
 PREFERENCES_MONITOR;Monitor
 PREFERENCES_MONPROFILE;Perfil de cor padrão
@@ -1238,9 +1212,7 @@ PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Renderização raw neutra
 PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Incorporar JPEG se for no tamanho real, caso contrário usar raw neutro
 PREFERENCES_TP_LABEL;Painel de ferramentas:
 PREFERENCES_TP_VSCROLLBAR;Ocultar barra de deslocamento vertical
-PREFERENCES_TUNNELMETADATA;Copiar Exif/IPTC/XMP inalterados para o ficheiro de saída
 PREFERENCES_USEBUNDLEDPROFILES;Usar perfis incluídos
-PREFERENCES_VIEW;Balanço de brancos do dispositivo de saída (monitor, TV, projetor, visualização, etc.)
 PREFERENCES_WORKFLOW;Interface
 PROFILEPANEL_COPYPPASTE;Parâmetros a copiar
 PROFILEPANEL_GLOBALPROFILES;Perfis incluídos
@@ -1449,8 +1421,6 @@ TP_COLORAPP_SURROUND_DARK;Escuro
 TP_COLORAPP_SURROUND_DIM;Sombrio
 TP_COLORAPP_SURROUND_EXDARK;Extremamente escuro (camada de corte)
 TP_COLORAPP_SURROUND_TOOLTIP;Altera os tons e cores de acordo com as condições de visualização do dispositivo de saída.\n\n<b>Médio</b>: ambiente de luz médio (padrão). A imagem não vai mudar.\n\n<b>Sombrio</b>: ambiente sombrio (TV). A imagem ficará ligeiramente escura.\n\n<b>Escuro</b>: ambiente escuro (projetor). A imagem ficará mais escura.\n\n<b>Extremamente escuro</b>: Ambiente extremamente escuro (camada de corte). A imagem ficará muito escura.
-TP_COLORAPP_SURSOURCE;Borda escura
-TP_COLORAPP_SURSOURCE_TOOLTIP;Pode ser usado se a imagem tiver uma borda escura.
 TP_COLORAPP_TCMODE_BRIGHTNESS;Brilho
 TP_COLORAPP_TCMODE_CHROMA;Croma
 TP_COLORAPP_TCMODE_COLORF;Colorido
@@ -1551,7 +1521,6 @@ TP_DEHAZE_SHOW_DEPTH_MAP;Mostrar mapa de profundidade
 TP_DEHAZE_STRENGTH;Intensidade
 TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Multi-zonas automático
 TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Global automático
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Tentar avaliar o ruído de crominância\nTenha cuidado, este cálculo é mediano e é bastante subjetivo!
 TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Crominância - Azul-amarelo
 TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Curva de crominância
 TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Aumentar (multiplicar) o valor de todos os controlos deslizantes de crominância.\nEsta curva permite ajustar a intensidade da redução de ruído cromático em função da cromaticidade, por exemplo, para aumentar a ação em áreas de baixa saturação e diminuí-la nas de alta saturação.
@@ -1569,8 +1538,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Pré-visualização do ruído: M
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Pré-visualização do ruído: Médio= -   Alto= -
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Matriz tamanho=%1, Centro: Tx=%2  Ty=%3
 TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Crominância - Vermelho-verde
-TP_DIRPYRDENOISE_ENH;Modo avançado
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Aumenta a qualidade da redução do ruído mas aumenta em 20% o tempo de processamento.
 TP_DIRPYRDENOISE_LABEL;Redução de ruído
 TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Controlo da luminância
 TP_DIRPYRDENOISE_LUMINANCE_CURVE;Curva de luminância
@@ -1599,7 +1566,6 @@ TP_DIRPYRDENOISE_MEDIAN_PASSES;Iterações medianas
 TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;A aplicação de três iterações de filtro mediano com o tamanho de janela 3×3 muitas vezes dá resultados melhores do que usar uma iteração de filtro mediano com tamanho de janela 7×7.
 TP_DIRPYRDENOISE_MEDIAN_TYPE;Tipo de mediano
 TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Aplicar um filtro mediano no tamanho da janela desejado. Quanto maior o tamanho da janela, mais tempo demora.\n\n3×3 suave: trata 5 píxeis numa janela de 3×3 píxeis.\n3×3: trata 9 píxeis numa janela de 3×3 píxeis.\n5×5 suave: trata 13 píxeis numa janela de 5×5 píxeis.\n5×5: trata 25 píxeis numa janela de 5×5 píxeis.\n7×7: trata 49 píxeis numa janela de 7×7 píxeis.\n9×9: trata 81 píxeis numa janela de 9×9 píxeis.\n\nÀs vezes é possível obter uma qualidade mais alta executando várias iterações com um tamanho de janela menor do que uma iteração com uma maior.
-TP_DIRPYRDENOISE_SLI;Controlo deslizante
 TP_DIRPYRDENOISE_TYPE_3X3;3×3
 TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 suave
 TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1704,8 +1670,6 @@ TP_ICM_APPLYHUESATMAP;Tabela base
 TP_ICM_APPLYHUESATMAP_TOOLTIP;Usa a tabela base DCP incorporada (HueSatMap). Esta configuração só estará disponível se o DCP selecionado tiver um.
 TP_ICM_APPLYLOOKTABLE;Tabela de valores
 TP_ICM_APPLYLOOKTABLE_TOOLTIP;Usa a tabela de valores (lookup table) DCP incorporada. Esta configuração só estará disponível se o DCP selecionado tiver um.
-TP_ICM_BLENDCMSMATRIX;Misturar as altas luzes do ICC com a matriz
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Ativar para recuperar as altas luzes cortadas ao usar perfis ICC baseados em LUT (Look up Table).
 TP_ICM_BPC;Compensação de ponto preto
 TP_ICM_DCPILLUMINANT;Iluminante
 TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolado
@@ -1831,7 +1795,6 @@ TP_RAWCACORR_AUTOIT_TOOLTIP;Esta funcionalidade está disponível se a opção "
 TP_RAWCACORR_AVOIDCOLORSHIFT;Evitar mudança de cor
 TP_RAWCACORR_CABLUE;Azul
 TP_RAWCACORR_CARED;Vermelho
-TP_RAWCACORR_CASTR;Intensidade
 TP_RAWEXPOS_BLACKS;Níveis de preto
 TP_RAWEXPOS_BLACK_0;Verde 1 (guia)
 TP_RAWEXPOS_BLACK_1;Vermelho
@@ -1890,15 +1853,12 @@ TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equaliza o brilho dos fotogramas para o bri
 TP_RAW_PIXELSHIFTGREEN;Verificar o canal verde para movimento
 TP_RAW_PIXELSHIFTHOLEFILL;Preencher buracos na máscara de movimento
 TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Preenche os buracos na máscara de movimento
-TP_RAW_PIXELSHIFTLMMSE;Usar LMMSE para partes móveis
-TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Usa LMMSE em vez de AMaZE para áreas de movimento.\nÚtil para imagens com ISO alto.
 TP_RAW_PIXELSHIFTMEDIAN;Usa mediana para partes móveis
 TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Usa a mediana de todos os fotogramas em vez do fotograma selecionado para regiões com movimento.\nRemove objetos que estão em lugares diferentes em todos os fotogramas.\nDá um efeito de movimento em objetos de movimento lento (sobreposição).
 TP_RAW_PIXELSHIFTMM_AUTO;Automático
 TP_RAW_PIXELSHIFTMM_CUSTOM;Personalizado
 TP_RAW_PIXELSHIFTMM_OFF;Desligado
 TP_RAW_PIXELSHIFTMOTIONMETHOD;Correção de movimento
-TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 significa que não há deteção de movimento.\n1 - 99 significa que o movimento será detectado de acordo com este valor. Aumentar o valor para aumentar a taxa de deteção.\n100 significa que será usado o fotograma de desmatrização AMaZE.
 TP_RAW_PIXELSHIFTNONGREENCROSS;Verifica os canais vermelho/azul para movimento
 TP_RAW_PIXELSHIFTSHOWMOTION;Mostra máscara de movimento
 TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Mostra apenas a máscara de movimento
@@ -1945,7 +1905,6 @@ TP_RETINEX_GAIN;Ganho
 TP_RETINEX_GAINOFFS;Ganho e deslocamento (brilho)
 TP_RETINEX_GAINTRANSMISSION;Transmissão de ganho
 TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplifica ou reduz o mapa de transmissão para alcançar a luminância desejada.\nO eixo do X (vertical) é a transmissão.\nO eixo do Y (horizontal) é o ganho.
-TP_RETINEX_GAIN_TOOLTIP;Atua na imagem restaurada.\n\nIsto é muito diferente das outras configurações. Usado para píxeis pretos ou brancos e para ajudar a equilibrar o histograma.
 TP_RETINEX_GAMMA;Gama
 TP_RETINEX_GAMMA_FREE;Livre
 TP_RETINEX_GAMMA_HIGH;Alta
@@ -2023,10 +1982,8 @@ TP_SAVEDIALOG_OK_TIP;Atalho: <b>Ctrl-Enter</b>
 TP_SHADOWSHLIGHTS_HIGHLIGHTS;Altas luzes
 TP_SHADOWSHLIGHTS_HLTONALW;Largura tonal das altas luzes
 TP_SHADOWSHLIGHTS_LABEL;Sombras/altas luzes
-TP_SHADOWSHLIGHTS_LOCALCONTR;Contraste local
 TP_SHADOWSHLIGHTS_RADIUS;Raio
 TP_SHADOWSHLIGHTS_SHADOWS;Sombras
-TP_SHADOWSHLIGHTS_SHARPMASK;Máscara de nitidez
 TP_SHADOWSHLIGHTS_SHTONALW;Largura tonal das sombras
 TP_SHARPENEDGE_AMOUNT;Quantidade
 TP_SHARPENEDGE_LABEL;Bordas

rtdata/languages/Portugues (Brasil)

@@ -98,7 +98,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Ignorar [raw] LMMSE Etapas de Aprimoramento
 EXPORT_BYPASS_SHARPENEDGE;Ignorar Nitidez de Borda
 EXPORT_BYPASS_SHARPENING;Ignorar Nitidez
 EXPORT_BYPASS_SHARPENMICRO;Ignorar Microcontraste
-EXPORT_BYPASS_SH_HQ;Ignorar Sombras/Realces da Máscara de Nitidez
 EXPORT_FASTEXPORTOPTIONS;<b>Opções de Exportação Rápida</b>
 EXPORT_INSTRUCTIONS;As opções de exportação rápida fornecem substituições para ignorar tempo e recursos consumidos no desenvolvimento de configurações e na execução do processamento de filas. Este método é recomendado para geração rápida de imagens de baixa resolução, quando a velocidade é prioridade ou quando a saída redimensionada é desejada para uma ou mais imagens sem fazer modificações nos parâmetros de desenvolvimento salvos.
 EXPORT_MAXHEIGHT;Altura máxima:
@@ -111,7 +110,6 @@ EXPORT_USE_FAST_PIPELINE_TIP;Use um processamento dedicado pipeline para imagens
 EXPORT_USE_NORMAL_PIPELINE;Padrão (ignorar algumas etapas, redimensionar no final)
 EXTPROGTARGET_1;raw
 EXTPROGTARGET_2;processado em fila
-FILEBROWSER_ADDDELTEMPLATE;Adicionar/Excluir modelos...
 FILEBROWSER_APPLYPROFILE;Aplicar
 FILEBROWSER_APPLYPROFILE_PARTIAL;Aplicar - parcial
 FILEBROWSER_AUTODARKFRAME;Quadro escuro automático
@@ -1051,7 +1049,6 @@ PREFERENCES_BEHADDALLHINT;Definir todos os parâmetros para o modo <b>Adicionar<
 PREFERENCES_BEHAVIOR;Comportamento
 PREFERENCES_BEHSETALL;Tudo para 'Configurar'
 PREFERENCES_BEHSETALLHINT;Definir todos os parâmetros para o modo <b>Configurar</b>.\nAjustes de parâmetros no painel de ferramentas de lote serão <b>absoluto</b>, os valores reais serão exibidos.
-PREFERENCES_BLACKBODY;Tungstênio
 PREFERENCES_CACHECLEAR;Limpar
 PREFERENCES_CACHECLEAR_ALL;Limpar todos os arquivos na cache:
 PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Limpar todos os arquivos na cache exceto os perfis para processamento:
@@ -1087,11 +1084,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Formato de chaves
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Nome
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;ID da Tag
 PREFERENCES_CUSTPROFBUILDPATH;Caminho executável
-PREFERENCES_D50;Configurações no menu principal
-PREFERENCES_D50_OLD;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
 PREFERENCES_DARKFRAMEFOUND;Encontrado
 PREFERENCES_DARKFRAMESHOTS;disparos
 PREFERENCES_DARKFRAMETEMPLATES;modelos
@@ -1114,32 +1106,15 @@ PREFERENCES_FLATFIELDFOUND;Encontrado
 PREFERENCES_FLATFIELDSDIR;Diretório de campos planos
 PREFERENCES_FLATFIELDSHOTS;disparos
 PREFERENCES_FLATFIELDTEMPLATES;modelos
-PREFERENCES_FLUOF2;Fluorescente F2
-PREFERENCES_FLUOF7;Fluorescente F7
-PREFERENCES_FLUOF11;Fluorescente F11
 PREFERENCES_FORIMAGE;Para fotos não-raw
 PREFERENCES_FORRAW;Para fotos raw
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Mesma altura da miniatura do Diapositivo e do Navegador de Arquivos
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Tamanho de miniatura separado exigirá mais tempo de processamento toda vez que alternar entre a guia do Editor e o Navegador de Arquivos.
 PREFERENCES_GIMPPATH;Diretório de instalação do GIMP
-PREFERENCES_GREY;Luminância Yb do dispositivo de saída (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Configurações no menu principal
-PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;Luminância Yb da cena (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;Automático
 PREFERENCES_HISTOGRAMPOSITIONLEFT;Histograma no painel esquerdo
-PREFERENCES_HISTOGRAMWORKING;Use o perfil de trabalho para o histograma principal e o Navegador
 PREFERENCES_HISTOGRAM_TOOLTIP;Se ativado, o perfil de trabalho é usado para renderizar o histograma principal e o painel Navegador, caso contrário, o perfil de saída corrigido por gama é usado.
 PREFERENCES_HLTHRESHOLD;Limite para realces recortados
 PREFERENCES_ICCDIR;Diretório contendo perfis de cores
-PREFERENCES_IMG_RELOAD_NEEDED;Essas alterações requerem que a imagem seja recarregada (ou que uma nova imagem seja aberta) para terem efeito.
 PREFERENCES_IMPROCPARAMS;Perfil de Processamento Padrão
 PREFERENCES_INSPECT_LABEL;Inspecionar
 PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Número máximo de imagens em cache
@@ -1158,7 +1133,6 @@ PREFERENCES_MENUGROUPLABEL;Grupo "Etiqueta de cor"
 PREFERENCES_MENUGROUPPROFILEOPERATIONS;Grupo "Operações de perfil de processamento"
 PREFERENCES_MENUGROUPRANK;Grupo "Classificar"
 PREFERENCES_MENUOPTIONS;Opções a Mostrar no Menu de Contexto
-PREFERENCES_METADATA;Metadados
 PREFERENCES_MONINTENT;Intenção de renderização padrão
 PREFERENCES_MONITOR;Monitor
 PREFERENCES_MONPROFILE;Perfil de cor padrão
@@ -1236,9 +1210,7 @@ PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Renderização raw neutra
 PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;JPEG incorporado se tamanho completo, raw neutro caso contrário
 PREFERENCES_TP_LABEL;Painel de ferramentas:
 PREFERENCES_TP_VSCROLLBAR;Ocultar barra de rolagem vertical
-PREFERENCES_TUNNELMETADATA;Copiar Exif/IPTC/XMP inalterado para o arquivo de saída
 PREFERENCES_USEBUNDLEDPROFILES;Use perfis agrupados
-PREFERENCES_VIEW;Balanço de branco do dispositivo de saída (monitor, TV, projetor, visualização, etc.)
 PREFERENCES_WORKFLOW;Layout
 PROFILEPANEL_COPYPPASTE;Parâmetros para copiar
 PROFILEPANEL_GLOBALPROFILES;Perfis agrupados
@@ -1447,8 +1419,6 @@ TP_COLORAPP_SURROUND_DARK;Escuro
 TP_COLORAPP_SURROUND_DIM;Sombrio
 TP_COLORAPP_SURROUND_EXDARK;Extremamente Escuro (Camada de corte)
 TP_COLORAPP_SURROUND_TOOLTIP;Altera tons e cores de acordo com as condições de visualização do dispositivo de saída.\n\n<b>Média</b>: Ambiente de luz médio (padrão). A imagem não vai mudar.\n\n<b>Sombrio</b>: Ambiente sombrio (TV). A imagem ficará ligeiramente escura.\n\n<b>Escuro</b>: Ambiente escuro (projetor). A imagem ficará mais escura.\n\n<b>Extremamente Escuro</b>: Ambiente extremamente escuro (camada de corte). A imagem ficará muito escura.
-TP_COLORAPP_SURSOURCE;Borda escura
-TP_COLORAPP_SURSOURCE_TOOLTIP;Pode ser usado se a imagem tiver uma borda escura.
 TP_COLORAPP_TCMODE_BRIGHTNESS;Brilho
 TP_COLORAPP_TCMODE_CHROMA;Croma
 TP_COLORAPP_TCMODE_COLORF;Colorido
@@ -1547,7 +1517,6 @@ TP_DEHAZE_SHOW_DEPTH_MAP;Mostrar mapa de profundidade
 TP_DEHAZE_STRENGTH;Intensidade
 TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zonas
 TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Global automático
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Tente avaliar o ruído de croma\nTenha cuidado, esse cálculo é mediano e é bastante subjetivo!
 TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Crominância - Azul-Amarelo
 TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Curva de crominância
 TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Aumentar (multiplicar) o valor de todos os controles deslizantes de crominância.\nEsta curva permite ajustar a intensidade da redução de ruído cromático em função da cromaticidade, por exemplo, para aumentar a ação em áreas de baixa saturação e diminuí-la nas de alta saturação.
@@ -1565,8 +1534,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Pré-visualização ruído: Médi
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Pré-visualização ruído: Médio= -   Alto= -
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Mosaico tamanho=%1, Centro: Tx=%2  Ty=%3
 TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Crominância - Vermelho-Verde
-TP_DIRPYRDENOISE_ENH;Modo avançado
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Aumenta a qualidade da redução de ruído em detrimento de um aumento de 20% no tempo de processamento.
 TP_DIRPYRDENOISE_LABEL;Redução de Ruído
 TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Controle de luminância
 TP_DIRPYRDENOISE_LUMINANCE_CURVE;Curva de luminância
@@ -1595,7 +1562,6 @@ TP_DIRPYRDENOISE_MEDIAN_PASSES;Iterações medianas
 TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;A aplicação de três iterações de filtro mediano com tamanho de janela 3×3 frequentemente dá resultados melhores do que usar uma iteração de filtro mediano com tamanho de janela 7×7.
 TP_DIRPYRDENOISE_MEDIAN_TYPE;Tipo mediano
 TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Aplique um filtro mediano do tamanho da janela. Quanto maior o tamanho da janela, mais tempo demora.\n\n3×3 suave: trata 5 píxeis numa janela de 3×3 píxeis.\n3×3: trata 9 píxeis numa janela de 3×3 píxeis.\n5×5 suave: trata 13 píxeis numa janela de 5×5 píxeis.\n5×5: trata 25 píxeis numa janela de 5×5 píxeis.\n7×7: trata 49 píxeis numa janela de 7×7 píxeis.\n9×9: trata 81 píxeis numa janela de 9×9 píxeis.\n\nÀs vezes é possível obter uma qualidade mais alta executando várias iterações com um tamanho de janela menor do que uma iteração com uma maior.
-TP_DIRPYRDENOISE_SLI;Controle deslizante
 TP_DIRPYRDENOISE_TYPE_3X3;3×3
 TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 suave
 TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1700,8 +1666,6 @@ TP_ICM_APPLYHUESATMAP;Tabela básica
 TP_ICM_APPLYHUESATMAP_TOOLTIP;Empregue a tabela básica DCP incorporada (MatizSatMap). A configuração só estará disponível se o DCP estiver selecionado como um.
 TP_ICM_APPLYLOOKTABLE;Tabela de aparência
 TP_ICM_APPLYLOOKTABLE_TOOLTIP;Empregue a tabela de aparência DCP incorporada. A configuração só estará disponível se o DCP estiver selecionado como um.
-TP_ICM_BLENDCMSMATRIX;Misture os realces do ICC com a matriz
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Ativar para recuperar realces recortados ao usar perfis ICC baseados em LUT.
 TP_ICM_BPC;Compensação de Ponto Preto
 TP_ICM_DCPILLUMINANT;Iluminante
 TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolado
@@ -1825,7 +1789,6 @@ TP_RAWCACORR_AUTOIT;Interações
 TP_RAWCACORR_AVOIDCOLORSHIFT;Evitar mudança de cor
 TP_RAWCACORR_CABLUE;Azul
 TP_RAWCACORR_CARED;Vermelho
-TP_RAWCACORR_CASTR;Intensidade
 TP_RAWEXPOS_BLACKS;Níveis de Preto
 TP_RAWEXPOS_BLACK_0;Verde 1 (guia)
 TP_RAWEXPOS_BLACK_1;Vermelho
@@ -1883,15 +1846,12 @@ TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equaliza o brilho dos quadros para o brilho
 TP_RAW_PIXELSHIFTGREEN;Verifica o canal verde para movimento
 TP_RAW_PIXELSHIFTHOLEFILL;Preenche buracos na máscara de movimento
 TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Preenche buracos na máscara de movimento
-TP_RAW_PIXELSHIFTLMMSE;Usa LMMSE para partes móveis
-TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Usa LMMSE em vez de AMaZE para áreas de movimento.\nÚtil para imagens com ISO alto.
 TP_RAW_PIXELSHIFTMEDIAN;Usa mediana para partes móveis
 TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use a mediana de todos os quadros em vez do quadro selecionado para regiões com movimento.\nRemove objetos que estão em lugares diferentes em todos os quadros.\nDá efeito de movimento em objetos em movimento lento (sobreposição).
 TP_RAW_PIXELSHIFTMM_AUTO;Automático
 TP_RAW_PIXELSHIFTMM_CUSTOM;Personalizado
 TP_RAW_PIXELSHIFTMM_OFF;Desligado
 TP_RAW_PIXELSHIFTMOTIONMETHOD;Correção de Movimento
-TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 não há detecção de movimento.\n1 - 99 o movimento será detectado de acordo com este valor. Aumentar o valor para aumentar a taxa de detecção.\n100 o quadro demosaico AMaZE será usado.
 TP_RAW_PIXELSHIFTNONGREENCROSS;Checa os canais vermelho/azul para movimento
 TP_RAW_PIXELSHIFTSHOWMOTION;Mostra máscara de movimento
 TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Mostra somente máscara de movimento
@@ -1937,7 +1897,6 @@ TP_RETINEX_FREEGAMMA;Gama livre
 TP_RETINEX_GAIN;Ganho
 TP_RETINEX_GAINOFFS;Ganho e Compensação (brilho)
 TP_RETINEX_GAINTRANSMISSION;Transmissão de ganho
-TP_RETINEX_GAIN_TOOLTIP;Atua na imagem restaurada.\n\nIsso é muito diferente das outras configurações. Usado para píxeis pretos ou brancos e para ajudar a equilibrar o histograma.
 TP_RETINEX_GAMMA;Gama
 TP_RETINEX_GAMMA_FREE;Livre
 TP_RETINEX_GAMMA_HIGH;Alto
@@ -2015,10 +1974,8 @@ TP_SAVEDIALOG_OK_TIP;Atalho: <b>Ctrl-Enter</b>
 TP_SHADOWSHLIGHTS_HIGHLIGHTS;Realces
 TP_SHADOWSHLIGHTS_HLTONALW;Largura tonal dos realces
 TP_SHADOWSHLIGHTS_LABEL;Sombras/Realces
-TP_SHADOWSHLIGHTS_LOCALCONTR;Contraste local
 TP_SHADOWSHLIGHTS_RADIUS;Raio
 TP_SHADOWSHLIGHTS_SHADOWS;Sombras
-TP_SHADOWSHLIGHTS_SHARPMASK;Máscara de nitidez
 TP_SHADOWSHLIGHTS_SHTONALW;Largura tonal das sombras
 TP_SHARPENEDGE_AMOUNT;Quantidade
 TP_SHARPENEDGE_LABEL;Bordas

rtdata/languages/Russian

@@ -97,7 +97,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Пропустить [raw] шаги LMMSE у
 EXPORT_BYPASS_SHARPENEDGE;Пропустить контурное повышение резкости
 EXPORT_BYPASS_SHARPENING;Пропустить повышение резкости
 EXPORT_BYPASS_SHARPENMICRO;Пропустить микроконтраст  
-EXPORT_BYPASS_SH_HQ;Пропустить настройки теней/пересветов
 EXPORT_FASTEXPORTOPTIONS;<b>Настройки быстрого экспорта</b>
 EXPORT_INSTRUCTIONS;Настройки быстрого экспорта помогают экономить время и ресурсы, затрачиваемые на установку настроек обработки и запускать очередь обработки, используя вместо этого настройки быстрого экспорта. Этот метод рекомендуется для быстрого создания изображений с низким разрешением, когда скорость обработки в приоритете или когда нужно отмасштабировать одно или несколько изображений без внесения изменений в их сохранённые параметры обработки.
 EXPORT_MAXHEIGHT;Максимальная высота: 
@@ -106,7 +105,6 @@ EXPORT_PUTTOQUEUEFAST; Поставить в очередь для быстро
 EXPORT_RAW_DMETHOD;Метод демозаика
 EXTPROGTARGET_1;raw
 EXTPROGTARGET_2;в очереди обработки
-FILEBROWSER_ADDDELTEMPLATE;Добавить/удалить шаблоны...
 FILEBROWSER_APPLYPROFILE;Применить
 FILEBROWSER_APPLYPROFILE_PARTIAL;Применить - частично
 FILEBROWSER_AUTODARKFRAME;Автоматический темновой кадр
@@ -734,7 +732,6 @@ PREFERENCES_BEHADDALLHINT;Выставить все параметры в реж
 PREFERENCES_BEHAVIOR;Поведение
 PREFERENCES_BEHSETALL;Всё в "Установить"
 PREFERENCES_BEHSETALLHINT;Выставить все параметры в режим <b>Установить</b>.\nНастройки параметров в панели пакетной обработки будут <b>абсолютными</b>, будут показаны используемые значения
-PREFERENCES_BLACKBODY;Лампа накаливания
 PREFERENCES_CACHECLEAR;Очистить
 PREFERENCES_CACHEMAXENTRIES;Максимальное число элементов в кэше
 PREFERENCES_CACHEOPTS;Параметры кэширования
@@ -757,11 +754,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Формат ключей
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Имя
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
 PREFERENCES_CUSTPROFBUILDPATH;Путь к исполняемому файлу
-PREFERENCES_D50;5000K
-PREFERENCES_D50_OLD;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
 PREFERENCES_DARKFRAMEFOUND;Найдено
 PREFERENCES_DARKFRAMESHOTS;снимков
 PREFERENCES_DARKFRAMETEMPLATES;шаблонов
@@ -782,20 +774,9 @@ PREFERENCES_FLATFIELDFOUND;Найдено
 PREFERENCES_FLATFIELDSDIR;Каталог файлов плоских полей
 PREFERENCES_FLATFIELDSHOTS;снимков
 PREFERENCES_FLATFIELDTEMPLATES;шаблонов
-PREFERENCES_FLUOF2;Лампа дневного света F2
-PREFERENCES_FLUOF7;Лампа дневного света F7
-PREFERENCES_FLUOF11;Лампа дневного света F11
 PREFERENCES_FORIMAGE;Для изображений
 PREFERENCES_FORRAW;Для Raw файлов
 PREFERENCES_GIMPPATH;Каталог установки GIMP
-PREFERENCES_GREY;Яркость (Yb) устройства вывода (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
 PREFERENCES_HISTOGRAMPOSITIONLEFT;Гистограмма на левой панели
 PREFERENCES_HLTHRESHOLD;Порог срабатывания пересветов
 PREFERENCES_ICCDIR;Каталог ICC профилей
@@ -815,7 +796,6 @@ PREFERENCES_MENUGROUPLABEL;Группа "Цветовая пометка"
 PREFERENCES_MENUGROUPPROFILEOPERATIONS;Группа "Действия с профилем обработки"
 PREFERENCES_MENUGROUPRANK;Группа "Рейтинг"
 PREFERENCES_MENUOPTIONS;Настройки контекстного меню
-PREFERENCES_METADATA;Метаданные
 PREFERENCES_MONITOR;Монитор
 PREFERENCES_MULTITAB;Много вкладок
 PREFERENCES_MULTITABDUALMON;Много вкладок, на втором мониторе (если возможно)
@@ -875,9 +855,7 @@ PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Нейтрально обработанны
 PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Встроенный полноразмерный jpeg, иначе нейтральный raw
 PREFERENCES_TP_LABEL;Панель инструментов:
 PREFERENCES_TP_VSCROLLBAR;Спрятать вертикальную полосу прокрутки
-PREFERENCES_TUNNELMETADATA;Копировать данные Exif/IPTC/XMP неизменённо
 PREFERENCES_USEBUNDLEDPROFILES;Использовать предустановленный профиль
-PREFERENCES_VIEW;ББ устройства вывода (монитор, проектор и т.д.)
 PREFERENCES_WORKFLOW;Стиль работы
 PROFILEPANEL_COPYPPASTE;Параметры для копирования
 PROFILEPANEL_GLOBALPROFILES;Предустановленные профили
@@ -1082,8 +1060,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Цветность
 TP_DIRPYRDENOISE_CHROMINANCE_METHOD;Метод
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW;Превью
 TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Цветность: красный-зелёный
-TP_DIRPYRDENOISE_ENH;Улучшенный режим
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Улучшает качество шумоподавления путём увеличения времени обработки на 20%.
 TP_DIRPYRDENOISE_LABEL;Подавление шумов
 TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Контроль яркости
 TP_DIRPYRDENOISE_LUMINANCE_CURVE;Кривая яркости
@@ -1102,7 +1078,6 @@ TP_DIRPYRDENOISE_MAIN_MODE_CONSERVATIVE;Осторожный
 TP_DIRPYRDENOISE_MAIN_MODE_TOOLTIP;"Осторожный" сохраняет низкочастотные структуры цветности, в то время как "агрессивный" уничтожает их.
 TP_DIRPYRDENOISE_MEDIAN_METHOD_LAB;L*a*b*
 TP_DIRPYRDENOISE_MEDIAN_METHOD_RGB;RGB
-TP_DIRPYRDENOISE_SLI;Ползунок
 TP_DIRPYRDENOISE_TYPE_3X3;3×3
 TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 мягкий
 TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1188,8 +1163,6 @@ TP_HSVEQUALIZER_HUE;H
 TP_HSVEQUALIZER_LABEL;Эквалайзер HSV
 TP_HSVEQUALIZER_SAT;S
 TP_HSVEQUALIZER_VAL;V
-TP_ICM_BLENDCMSMATRIX;Смешивать засветы с матрицей
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Включить восстановление пересветов во время использования профилей ICC на основе LUT
 TP_ICM_BPC;Компенсация точки чёрного
 TP_ICM_DCPILLUMINANT;Источник света
 TP_ICM_DCPILLUMINANT_INTERPOLATED;Интерполированный
@@ -1295,7 +1268,6 @@ TP_RAWCACORR_AUTOIT;Подходов
 TP_RAWCACORR_AVOIDCOLORSHIFT;Избегать сдвига цветов
 TP_RAWCACORR_CABLUE;Синий
 TP_RAWCACORR_CARED;Красный
-TP_RAWCACORR_CASTR;Сила
 TP_RAWEXPOS_BLACKS;Уровни черного
 TP_RAWEXPOS_BLACK_0;Зелёный 1 (ведущий)
 TP_RAWEXPOS_BLACK_1;Красный
@@ -1368,10 +1340,8 @@ TP_SAVEDIALOG_OK_TIP;Горячая клавиша <b>Ctrl-Enter</b>
 TP_SHADOWSHLIGHTS_HIGHLIGHTS;Света
 TP_SHADOWSHLIGHTS_HLTONALW;Уровень
 TP_SHADOWSHLIGHTS_LABEL;Тени/света
-TP_SHADOWSHLIGHTS_LOCALCONTR;Локальный контраст
 TP_SHADOWSHLIGHTS_RADIUS;Радиус
 TP_SHADOWSHLIGHTS_SHADOWS;Тени
-TP_SHADOWSHLIGHTS_SHARPMASK;Маска резкости
 TP_SHADOWSHLIGHTS_SHTONALW;Уровень 
 TP_SHARPENEDGE_AMOUNT;Величина
 TP_SHARPENEDGE_LABEL;Края
@@ -1835,13 +1805,7 @@ ZOOMPANEL_ZOOMOUT;Отдалить\nГорячая клавиша: <b>-</b>
 !PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
 !PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
 !PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
 !PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
 !PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
 !PREFERENCES_MAXRECENTFOLDERS;Maximum number of recent folders
 !PREFERENCES_MONINTENT;Default rendering intent
@@ -1909,8 +1873,6 @@ ZOOMPANEL_ZOOMOUT;Отдалить\nГорячая клавиша: <b>-</b>
 !TP_COLORAPP_SURROUND_DIM;Dim
 !TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
 !TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\n<b>Average</b>: Average light environment (standard). The image will not change.\n\n<b>Dim</b>: Dim environment (TV). The image will become slighty dark.\n\n<b>Dark</b>: Dark environment (projector). The image will become more dark.\n\n<b>Extremly Dark</b>: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
 !TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
 !TP_COLORAPP_TCMODE_CHROMA;Chroma
 !TP_COLORAPP_TCMODE_COLORF;Colorfulness
@@ -1983,7 +1945,6 @@ ZOOMPANEL_ZOOMOUT;Отдалить\nГорячая клавиша: <b>-</b>
 !TP_COLORTONING_TWOSTD;Standard chroma
 !TP_CROP_PPI;PPI
 !TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
 !TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
 !TP_DIRPYRDENOISE_CHROMINANCE_METHODADVANCED_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
 !TP_DIRPYRDENOISE_CHROMINANCE_METHOD_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nAutomatic multi-zones\nNo preview - works only during saving, but using the "Preview" method by matching the tile size and center to the preview size and center you can get an idea of the expected results.\nThe image is divided into tiles (about 10 to 70 depending on image size) and each tile receives its own chrominance noise reduction settings.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
@@ -2071,15 +2032,12 @@ ZOOMPANEL_ZOOMOUT;Отдалить\nГорячая клавиша: <b>-</b>
 !TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
 !TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
 !TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
 !TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
 !TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
 !TP_RAW_PIXELSHIFTMM_AUTO;Automatic
 !TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
 !TP_RAW_PIXELSHIFTMM_OFF;Off
 !TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
 !TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
 !TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
 !TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -2104,7 +2062,6 @@ ZOOMPANEL_ZOOMOUT;Отдалить\nГорячая клавиша: <b>-</b>
 !TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
 !TP_RETINEX_GAINTRANSMISSION;Gain transmission
 !TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
 !TP_RETINEX_GAMMA;Gamma
 !TP_RETINEX_GAMMA_FREE;Free
 !TP_RETINEX_GAMMA_HIGH;High

rtdata/languages/Serbian (Cyrilic Characters)

@@ -68,7 +68,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Занемари [raw] ЛММСЕ корак
 EXPORT_BYPASS_SHARPENEDGE;Занемари оштрење ивице
 EXPORT_BYPASS_SHARPENING;Занемари оштрење
 EXPORT_BYPASS_SHARPENMICRO;Занемари микроконтраст
-EXPORT_BYPASS_SH_HQ;Занемари оштру маску за Сенке/Светло
 EXPORT_FASTEXPORTOPTIONS;<b>Опције за брз извоз</b>
 EXPORT_INSTRUCTIONS;Брз извоз омогућава да заобиђете неке од захтевних и споријих процеса приликом развијања слика и да закажете фотографије за брзо развијање. Овј метод је добар за брзо развијање слика у мањој резолуцији, када вам је битно да фотографије добијете што пре или када желите примените задовољавајуће параметре за развијање већег броја фотографија одједном без измене њихових профила.
 EXPORT_MAXHEIGHT;Највећа висина:
@@ -77,7 +76,6 @@ EXPORT_PUTTOQUEUEFAST;  Закажи за брз извоз
 EXPORT_RAW_DMETHOD;Начин расклапања мозаика
 EXTPROGTARGET_1;raw
 EXTPROGTARGET_2;заказано-развијено
-FILEBROWSER_ADDDELTEMPLATE;Додај/уклони шаблоне...
 FILEBROWSER_APPLYPROFILE;Примени профил
 FILEBROWSER_APPLYPROFILE_PARTIAL;Примени профил (половично)
 FILEBROWSER_AUTODARKFRAME;Сам одреди тамни кадар
@@ -591,7 +589,6 @@ PREFERENCES_BEHADDALLHINT;Поставља све параметре у режи
 PREFERENCES_BEHAVIOR;Понашање
 PREFERENCES_BEHSETALL;Све у „Постави“
 PREFERENCES_BEHSETALLHINT;Поставља све параметре у режим <b>Постави</b>.\nЊихово подешавање помоћу алата из панела за заказано ће бити <b>апсолутне</b> вредности као што су и изабране.
-PREFERENCES_BLACKBODY;Обична сијалица
 PREFERENCES_CACHEMAXENTRIES;Највећи број мест у остави
 PREFERENCES_CACHEOPTS;Подешавање оставе
 PREFERENCES_CACHETHUMBHEIGHT;Највећа висина приказа
@@ -602,10 +599,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Кључни  формати
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Назив
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;БрОзнаке
 PREFERENCES_CUSTPROFBUILDPATH;Извршна путања
-PREFERENCES_D50;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
 PREFERENCES_DARKFRAMEFOUND;Нађен
 PREFERENCES_DARKFRAMESHOTS;снимака
 PREFERENCES_DARKFRAMETEMPLATES;шаблони
@@ -625,20 +618,9 @@ PREFERENCES_FLATFIELDFOUND;Нађено
 PREFERENCES_FLATFIELDSDIR;Директоријум за равна поља
 PREFERENCES_FLATFIELDSHOTS;снимака
 PREFERENCES_FLATFIELDTEMPLATES;шаблони
-PREFERENCES_FLUOF2;Флоресцентна F2
-PREFERENCES_FLUOF7;Флоресцентна F7
-PREFERENCES_FLUOF11;Флоресцентна F11
 PREFERENCES_FORIMAGE;За датотеке са сликама
 PREFERENCES_FORRAW;За RAW датотеке
 PREFERENCES_GIMPPATH;Директоријум са инсталираним Гимпом
-PREFERENCES_GREY;Yb луминанса излазног уређаја (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
 PREFERENCES_HISTOGRAMPOSITIONLEFT;Хистограм у левој површи
 PREFERENCES_HLTHRESHOLD;Праг за одсечене светле делове
 PREFERENCES_ICCDIR;ИЦЦ директоријум
@@ -655,7 +637,6 @@ PREFERENCES_MENUGROUPLABEL;Групиши обележавање
 PREFERENCES_MENUGROUPPROFILEOPERATIONS;Групиши радње са профилима
 PREFERENCES_MENUGROUPRANK;Групиши оцењивање
 PREFERENCES_MENUOPTIONS;Опције менија
-PREFERENCES_METADATA;Метаподаци
 PREFERENCES_MULTITAB;Режим у више листова
 PREFERENCES_MULTITABDUALMON;Режим у више листова, на другом монитору
 PREFERENCES_OUTDIR;Излазни директоријум
@@ -698,9 +679,7 @@ PREFERENCES_TAB_IMPROC;Обрада сликe
 PREFERENCES_TAB_SOUND;Звуци
 PREFERENCES_TP_LABEL;Површ алата:
 PREFERENCES_TP_VSCROLLBAR;Сакриј клизаче у области са алаткама
-PREFERENCES_TUNNELMETADATA;Копирај неизмењене IPTC/XMP (када је слика означена другим програмом)
 PREFERENCES_USEBUNDLEDPROFILES;Користи профиле који долазе уз програм
-PREFERENCES_VIEW;Баланс беле излазног уређаја (монитор, ТВ, пројакетор и др.)
 PREFERENCES_WORKFLOW;Ток обраде
 PROFILEPANEL_COPYPPASTE;Параметри за копирање
 PROFILEPANEL_GLOBALPROFILES;Профили из програма
@@ -876,8 +855,6 @@ TP_COLORAPP_SURROUND_DARK;Тамно
 TP_COLORAPP_SURROUND_DIM;Затамњено
 TP_COLORAPP_SURROUND_EXDARK;Јако тамно
 TP_COLORAPP_SURROUND_TOOLTIP;Мења тонове и боје како би се прилагодило условима уређаја за приказ.\n\n<b>Просечно</b>: Просечно осветљено окружење (уобичајено). Слика неће бити измењена.\n\n<b>Затамњено</b>: Затамњено окружење (ТВ). Слика ће постати за нијансу тамнија.\n\n<b>Тамно</b>: Тамно окружење (пројектор). Слика ће постати још више тамна.\n\n<b>Јако тамно</b>: Екстрамно тамно окружење (cutsheet). Слика ће постати изузетно тамна.
-TP_COLORAPP_SURSOURCE;Тамно окружење
-TP_COLORAPP_SURSOURCE_TOOLTIP;Може да се користи уколико слика има тамне ивице.
 TP_COLORAPP_TCMODE_BRIGHTNESS;Освтљеност
 TP_COLORAPP_TCMODE_CHROMA;Хрома
 TP_COLORAPP_TCMODE_COLORF;Живост боја
@@ -912,8 +889,6 @@ TP_DEFRINGE_THRESHOLD;Праг
 TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Хроминанса: Плава-Жута
 TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Боја
 TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Хроминанса - црвена-зелена
-TP_DIRPYRDENOISE_ENH;Побољшани режим
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Повећава квалитет уклањања шума на уштрб око 20% времена за обраду.
 TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Детаљи луминансе
 TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Луминанса
 TP_DIRPYRDENOISE_MAIN_COLORSPACE;Начин
@@ -991,8 +966,6 @@ TP_HSVEQUALIZER_HUE;Нијанса
 TP_HSVEQUALIZER_LABEL;Уједначење ХСВ канала
 TP_HSVEQUALIZER_SAT;Засићеност
 TP_HSVEQUALIZER_VAL;Вредност
-TP_ICM_BLENDCMSMATRIX;Утопи светле делове у матрицу
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Омогућите како би повратили преосветљене делове уколико користите LUT ICC профиле.
 TP_ICM_DCPILLUMINANT;Илуминантно
 TP_ICM_DCPILLUMINANT_INTERPOLATED;Интерполирано
 TP_ICM_INPUTCAMERA;Подразумевано из апарата
@@ -1118,10 +1091,8 @@ TP_SAVEDIALOG_OK_TIP;Пречица: <b>Ctrl-Enter</b>
 TP_SHADOWSHLIGHTS_HIGHLIGHTS;Светло
 TP_SHADOWSHLIGHTS_HLTONALW;Ширина тонова
 TP_SHADOWSHLIGHTS_LABEL;Сенке/Светло
-TP_SHADOWSHLIGHTS_LOCALCONTR;Локални контраст
 TP_SHADOWSHLIGHTS_RADIUS;Полупречник
 TP_SHADOWSHLIGHTS_SHADOWS;Сенке
-TP_SHADOWSHLIGHTS_SHARPMASK;Оштра маска
 TP_SHADOWSHLIGHTS_SHTONALW;Ширина тонова
 TP_SHARPENEDGE_AMOUNT;Количина
 TP_SHARPENEDGE_LABEL;Ивице
@@ -1718,19 +1689,12 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике <b>-</b>
 !PREFERENCES_CURVEBBOXPOS_BELOW;Below
 !PREFERENCES_CURVEBBOXPOS_LEFT;Left
 !PREFERENCES_CURVEBBOXPOS_RIGHT;Right
-!PREFERENCES_D50_OLD;5000K
 !PREFERENCES_DIRECTORIES;Directories
 !PREFERENCES_EDITORCMDLINE;Custom command line
 !PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
 !PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
 !PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
 !PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
 !PREFERENCES_INSPECT_LABEL;Inspect
 !PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
 !PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
@@ -1880,7 +1844,6 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике <b>-</b>
 !TP_DEHAZE_STRENGTH;Strength
 !TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
 !TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
 !TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
 !TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
 !TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominance
@@ -1916,7 +1879,6 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике <b>-</b>
 !TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
 !TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
 !TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
 !TP_DIRPYRDENOISE_TYPE_3X3;3×3
 !TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
 !TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1998,7 +1960,6 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике <b>-</b>
 !TP_RAWCACORR_AUTOIT;Iterations
 !TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
 !TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CASTR;Strength
 !TP_RAWEXPOS_BLACK_0;Green 1 (lead)
 !TP_RAWEXPOS_BLACK_1;Red
 !TP_RAWEXPOS_BLACK_2;Blue
@@ -2044,15 +2005,12 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике <b>-</b>
 !TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
 !TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
 !TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
 !TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
 !TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
 !TP_RAW_PIXELSHIFTMM_AUTO;Automatic
 !TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
 !TP_RAW_PIXELSHIFTMM_OFF;Off
 !TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
 !TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
 !TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
 !TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -2087,7 +2045,6 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике <b>-</b>
 !TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
 !TP_RETINEX_GAINTRANSMISSION;Gain transmission
 !TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
 !TP_RETINEX_GAMMA;Gamma
 !TP_RETINEX_GAMMA_FREE;Free
 !TP_RETINEX_GAMMA_HIGH;High

rtdata/languages/Swedish

@@ -77,7 +77,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Förbigå förbättringssteg för LMMSE (För
 EXPORT_BYPASS_SHARPENEDGE;Förbigå kantskärpning
 EXPORT_BYPASS_SHARPENING;Förbigå skärpning
 EXPORT_BYPASS_SHARPENMICRO;Förbigå mikrokontrast
-EXPORT_BYPASS_SH_HQ;Förbigå skuggor/högdagrar (hög kvalitet)
 EXPORT_FASTEXPORTOPTIONS;<b>Inställningar för snabbexport</b>
 EXPORT_INSTRUCTIONS;Snabbexport erbjuder snabbare konvertering genom att åsidosätta tidskrävande verktyg och framkallningsinställningar. Batchkön körs då med dessa, mindre krävande, inställningar istället så länge det här alternativet är valt. Den här metoden rekommenderas för de konverteringar där användningsområdet tillåter en lägre kvalitet på de färdiga bilderna. Genom att använda det här alternativet görs inga modifieringar i bildens normala framkallningsinställningar.
 EXPORT_MAXHEIGHT;Maximal höjd:
@@ -86,7 +85,6 @@ EXPORT_PUTTOQUEUEFAST; Lägg till i kö för snabbexport
 EXPORT_RAW_DMETHOD;Demosaic-metod
 EXTPROGTARGET_1;Rå
 EXTPROGTARGET_2;köhanterad
-FILEBROWSER_ADDDELTEMPLATE;Lägg till/ta bort förinställningar...
 FILEBROWSER_APPLYPROFILE;Använd profil
 FILEBROWSER_APPLYPROFILE_PARTIAL;Applicera profil (partiell)
 FILEBROWSER_AUTODARKFRAME;Automatisk svartbild
@@ -809,7 +807,6 @@ PREFERENCES_BEHADDALLHINT;Sätt alla parametrar till <b>Lägg till</b>-läge.\nF
 PREFERENCES_BEHAVIOR;Uppträdande
 PREFERENCES_BEHSETALL;Sätt allt till 'Ange'
 PREFERENCES_BEHSETALLHINT;Sätt alla parametrar till <b>Ange</b>-läge.\nFörändringar i parametrar i batch-verktyget kommer att vara <b>absoluta</b> och de faktiska värdena kommer att visas.
-PREFERENCES_BLACKBODY;Glödlampa
 PREFERENCES_CACHEMAXENTRIES;Maximalt antal cachefiler
 PREFERENCES_CACHEOPTS;Cacheinställningar
 PREFERENCES_CACHETHUMBHEIGHT;Maximal höjd på miniatyrbilderna
@@ -828,10 +825,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Format för nycklar
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Namn
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
 PREFERENCES_CUSTPROFBUILDPATH;Exekverbar sökväg
-PREFERENCES_D50;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
 PREFERENCES_DARKFRAMEFOUND;Hittade
 PREFERENCES_DARKFRAMESHOTS;bilder
 PREFERENCES_DARKFRAMETEMPLATES;mallar
@@ -851,31 +844,15 @@ PREFERENCES_FLATFIELDFOUND;Hittade
 PREFERENCES_FLATFIELDSDIR;Plattfältskatalog
 PREFERENCES_FLATFIELDSHOTS;bilder
 PREFERENCES_FLATFIELDTEMPLATES;mallar
-PREFERENCES_FLUOF2;Lysrör F2
-PREFERENCES_FLUOF7;Lysrör F7
-PREFERENCES_FLUOF11;Lysrör F11
 PREFERENCES_FORIMAGE;För bildfiler
 PREFERENCES_FORRAW;För råbilder
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Samma miniatyrbildshöjd mellan redigerings- och filvyn
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Att ha olika miniatyrbildshöjder kräver ytterligare beräkningskraft varje gång du växlar mellan redigerings- och filvyn.
 PREFERENCES_GIMPPATH;Installationskatalog för GIMP
-PREFERENCES_GREY;Utenhetens Yb luminans (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;Vyns Yb luminans (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;Automatisk
 PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogrammet till vänster
-PREFERENCES_HISTOGRAMWORKING;Använd arbetsprofil för huvudhistogram och översiktsvyn.
 PREFERENCES_HISTOGRAM_TOOLTIP;Om påslagen, så används arbetsprofilen för att skapa huvudhistogrammet och översiktsvyn, annars används den gamma-korrigerade profilen istället.
 PREFERENCES_HLTHRESHOLD;Tröskelvärde för högdagrar
 PREFERENCES_ICCDIR;Katalog för färgprofiler
-PREFERENCES_IMG_RELOAD_NEEDED;De här förändringarna kräver att bilden laddas om (eller att en ny bild öppnas) för att effektueras.
 PREFERENCES_IMPROCPARAMS;Standardprofiler
 PREFERENCES_INSPECT_LABEL;Inspektion
 PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximalt antal cachade bilder
@@ -892,7 +869,6 @@ PREFERENCES_MENUGROUPLABEL;Visa "Etikett"
 PREFERENCES_MENUGROUPPROFILEOPERATIONS;Visa "Profilaktiviteter"
 PREFERENCES_MENUGROUPRANK;Visa "Betygsättning"
 PREFERENCES_MENUOPTIONS;Menyval för högerklick
-PREFERENCES_METADATA;Metadata
 PREFERENCES_MULTITAB;Öppna bilderna i olika flikar
 PREFERENCES_MULTITABDUALMON;Visa bild på andra skärmen, om möjligt, i flerfliksläge
 PREFERENCES_NAVIGATIONFRAME;Navigering
@@ -949,9 +925,7 @@ PREFERENCES_TAB_IMPROC;Bildbehandling
 PREFERENCES_TAB_SOUND;Ljud
 PREFERENCES_TP_LABEL;Verktygspanel:
 PREFERENCES_TP_VSCROLLBAR;Göm verktygpanelens vertikala skrollist
-PREFERENCES_TUNNELMETADATA;Kopiera Exif/IPTC/XMP till utfilen oförändrat
 PREFERENCES_USEBUNDLEDPROFILES;Visa förinstallerade profiler
-PREFERENCES_VIEW;Utenhetens vitbalansvärde (datorskärm, TV, bildkanon, etc.)
 PREFERENCES_WORKFLOW;Arbetsflöde
 PROFILEPANEL_COPYPPASTE;Parametrar att kopiera
 PROFILEPANEL_GLOBALPROFILES;Förinstallerade profiler
@@ -1136,8 +1110,6 @@ TP_COLORAPP_SURROUND_DARK;Mörk
 TP_COLORAPP_SURROUND_DIM;Dunkelt
 TP_COLORAPP_SURROUND_EXDARK;Extremt mörkt
 TP_COLORAPP_SURROUND_TOOLTIP;Ändra toner och färger för att ta i beaktande betraktningsförhållandena för utmatningsenheten\n\n<b>Medel:</b>\nMedelljusa omgivningar (standard)\nBilden kommer ej att ändras\n\n<b>Dunkelt:</b>\nDunkla omgivningar (TV)\nBilden kommer att bli aningen mörkare\n\n<b>Mörk:</b>\nMörka omgivningar (projektor)\nBilden kommer att bli mörkare\n\n<b>Extremt mörkt:</b>\nExtremt mörka omgivningar (cutsheet)\nBilden kommer bli mycket mörk
-TP_COLORAPP_SURSOURCE;Mörk omgivning
-TP_COLORAPP_SURSOURCE_TOOLTIP;Kan användas om källbilden har en mörk kant.
 TP_COLORAPP_TCMODE_BRIGHTNESS;Intensitet
 TP_COLORAPP_TCMODE_CHROMA;Kroma
 TP_COLORAPP_TCMODE_COLORF;Färgmättnad
@@ -1205,7 +1177,6 @@ TP_DEFRINGE_LABEL;Fyll ut överstrålning
 TP_DEFRINGE_RADIUS;Radie
 TP_DEFRINGE_THRESHOLD;Tröskelvärde
 TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatisk global
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Försök att utvärdera chroma-bruset\nVar försiktig, den här beräkningen görs på genomsnittet och är tämligen subjektiv!
 TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Krominans - Blå-Gul
 TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Krominans-kurva
 TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Krominans
@@ -1220,8 +1191,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Förhandsgranska brus: Medel=%1
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Förhandsgranska brus: Medel= -   Hög= -
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile-storlek=%1, Center: Tx=%2  Ty=%3
 TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Krominans - Röd-Grön
-TP_DIRPYRDENOISE_ENH;Förbättrat läge
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Ökar kvaliteten på brusreduceringen till priset av 20 % längre beräkningstid
 TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminanskontroll
 TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminans-kurva
 TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Luminansdetalj
@@ -1241,7 +1210,6 @@ TP_DIRPYRDENOISE_MEDIAN_METHOD_LAB;L*a*b*
 TP_DIRPYRDENOISE_MEDIAN_METHOD_LUMINANCE;Endast luminans
 TP_DIRPYRDENOISE_MEDIAN_METHOD_RGB;RGB
 TP_DIRPYRDENOISE_MEDIAN_METHOD_WEIGHTED;Viktad L* (litet) + a*b* (normal)
-TP_DIRPYRDENOISE_SLI;Reglage
 TP_DIRPYRDENOISE_TYPE_3X3;3×3
 TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 mjuk
 TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1336,8 +1304,6 @@ TP_HSVEQUALIZER_VAL;Värde
 TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Bas-exponering
 TP_ICM_APPLYHUESATMAP;Bas-tabell
 TP_ICM_APPLYLOOKTABLE_TOOLTIP;Tillämpa den inbäddade DCP:ns uppslagstabell. Inställningen är bara aktiv om den valda DCP har en sådan.
-TP_ICM_BLENDCMSMATRIX;Mixa högdagrar med matris
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Möjliggör återskapande av utbrända högdagrar när LUT-baserade ICC-profiler används.
 TP_ICM_BPC;Svartpunktskompensation
 TP_ICM_DCPILLUMINANT;Ljuskälla
 TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolerad ljuskälla
@@ -1433,7 +1399,6 @@ TP_PRSHARPENING_TOOLTIP;Skärper bilden efter att den storleksförändrats. Fung
 TP_RAWCACORR_AUTO;Reducera automatiskt kromatiska abberationer
 TP_RAWCACORR_CABLUE;Blå
 TP_RAWCACORR_CARED;Röd
-TP_RAWCACORR_CASTR;Styrka
 TP_RAWEXPOS_BLACKS;Svartpunktsnivåer
 TP_RAWEXPOS_BLACK_0;Grön 1 (ledare)
 TP_RAWEXPOS_BLACK_1;Röd
@@ -1545,10 +1510,8 @@ TP_SAVEDIALOG_OK_TIP;Kortkommando: <b>Ctrl-Enter</b>
 TP_SHADOWSHLIGHTS_HIGHLIGHTS;Högdager
 TP_SHADOWSHLIGHTS_HLTONALW;Tonvidd (Högdagrar)
 TP_SHADOWSHLIGHTS_LABEL;Skugg- och högdageråterställning
-TP_SHADOWSHLIGHTS_LOCALCONTR;Lokal kontrast
 TP_SHADOWSHLIGHTS_RADIUS;Radie
 TP_SHADOWSHLIGHTS_SHADOWS;Skuggor
-TP_SHADOWSHLIGHTS_SHARPMASK;Skarp mask
 TP_SHADOWSHLIGHTS_SHTONALW;Tonvidd (Skuggor)
 TP_SHARPENEDGE_AMOUNT;Mängd
 TP_SHARPENEDGE_LABEL;Kanter
@@ -2047,11 +2010,9 @@ ZOOMPANEL_ZOOMOUT;Förminska.\nKortkommando: <b>-</b>
 !PREFERENCES_CROP_GUIDES_FRAME;Frame
 !PREFERENCES_CROP_GUIDES_FULL;Original
 !PREFERENCES_CROP_GUIDES_NONE;None
-!PREFERENCES_D50_OLD;5000K
 !PREFERENCES_DIRECTORIES;Directories
 !PREFERENCES_EDITORCMDLINE;Custom command line
 !PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
 !PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
 !PREFERENCES_LANG;Language
 !PREFERENCES_MONINTENT;Default rendering intent
@@ -2231,15 +2192,12 @@ ZOOMPANEL_ZOOMOUT;Förminska.\nKortkommando: <b>-</b>
 !TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
 !TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
 !TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
 !TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
 !TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
 !TP_RAW_PIXELSHIFTMM_AUTO;Automatic
 !TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
 !TP_RAW_PIXELSHIFTMM_OFF;Off
 !TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
 !TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
 !TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
 !TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -2259,7 +2217,6 @@ ZOOMPANEL_ZOOMOUT;Förminska.\nKortkommando: <b>-</b>
 !TP_RETINEX_CURVEEDITOR_CD_TOOLTIP;Luminance according to luminance L=f(L)\nCorrect raw data to reduce halos and artifacts.
 !TP_RETINEX_CURVEEDITOR_MAP_TOOLTIP;This curve can be applied alone or with a Gaussian mask or wavelet mask.\nBeware of artifacts!
 !TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
 !TP_RETINEX_GAMMA_TOOLTIP;Restore tones by applying gamma before and after Retinex. Different from Retinex curves or others curves (Lab, Exposure, etc.).
 !TP_RETINEX_HIGHLIGHT_TOOLTIP;Increase action of High algorithm.\nMay require you to re-adjust "Neighboring pixels" and to increase the "White-point correction" in the Raw tab -> Raw White Points tool.
 !TP_RETINEX_LABEL_MASK;Mask

rtdata/languages/default

@@ -99,7 +99,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Bypass [raw] LMMSE Enhancement Steps
 EXPORT_BYPASS_SHARPENEDGE;Bypass Edge Sharpening
 EXPORT_BYPASS_SHARPENING;Bypass Sharpening
 EXPORT_BYPASS_SHARPENMICRO;Bypass Microcontrast
-EXPORT_BYPASS_SH_HQ;Bypass Sharp Mask Shadows/Highlights
 EXPORT_FASTEXPORTOPTIONS;<b>Fast Export Options</b>
 EXPORT_INSTRUCTIONS;Fast Export options provide overrides to bypass time and resource consuming development settings and to run queue processing using the fast export settings instead. This method is recommended for quicker generation of lower resolution images when speed is a priority or when resized output is desired for one or many images without making modifications to their saved development parameters.
 EXPORT_MAXHEIGHT;Maximum height:
@@ -112,7 +111,6 @@ EXPORT_USE_FAST_PIPELINE_TIP;Use a dedicated processing pipeline for images in F
 EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
 EXTPROGTARGET_1;raw
 EXTPROGTARGET_2;queue-processed
-FILEBROWSER_ADDDELTEMPLATE;Add/Del templates...
 FILEBROWSER_APPLYPROFILE;Apply
 FILEBROWSER_APPLYPROFILE_PARTIAL;Apply - partial
 FILEBROWSER_AUTODARKFRAME;Auto dark-frame
@@ -1055,7 +1053,6 @@ PREFERENCES_BEHADDALLHINT;Set all parameters to the <b>Add</b> mode.\nAdjustment
 PREFERENCES_BEHAVIOR;Behavior
 PREFERENCES_BEHSETALL;All to 'Set'
 PREFERENCES_BEHSETALLHINT;Set all parameters to the <b>Set</b> mode.\nAdjustments of parameters in the batch tool panel will be <b>absolute</b>, the actual values will be displayed.
-PREFERENCES_BLACKBODY;Tungsten
 PREFERENCES_CACHECLEAR;Clear
 PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
 PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
@@ -1092,11 +1089,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys format
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
 PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
 PREFERENCES_CUSTPROFBUILDPATH;Executable path
-PREFERENCES_D50;Settings in main menu
-PREFERENCES_D50_OLD;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
 PREFERENCES_DARKFRAMEFOUND;Found
 PREFERENCES_DARKFRAMESHOTS;shots
 PREFERENCES_DARKFRAMETEMPLATES;templates
@@ -1119,32 +1111,15 @@ PREFERENCES_FLATFIELDFOUND;Found
 PREFERENCES_FLATFIELDSDIR;Flat-fields directory
 PREFERENCES_FLATFIELDSHOTS;shots
 PREFERENCES_FLATFIELDTEMPLATES;templates
-PREFERENCES_FLUOF2;Fluorescent F2
-PREFERENCES_FLUOF7;Fluorescent F7
-PREFERENCES_FLUOF11;Fluorescent F11
 PREFERENCES_FORIMAGE;For non-raw photos
 PREFERENCES_FORRAW;For raw photos
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
 PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
 PREFERENCES_GIMPPATH;GIMP installation directory
-PREFERENCES_GREY;Output device's Yb luminance (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Settings in main menu
-PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;Scene Yb luminance (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;Automatic
 PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram in left panel
-PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
 PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
 PREFERENCES_HLTHRESHOLD;Threshold for clipped highlights
 PREFERENCES_ICCDIR;Directory containing color profiles
-PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
 PREFERENCES_IMPROCPARAMS;Default Processing Profile
 PREFERENCES_INSPECT_LABEL;Inspect
 PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
@@ -1163,7 +1138,6 @@ PREFERENCES_MENUGROUPLABEL;Group "Color label"
 PREFERENCES_MENUGROUPPROFILEOPERATIONS;Group "Processing profile operations"
 PREFERENCES_MENUGROUPRANK;Group "Rank"
 PREFERENCES_MENUOPTIONS;Context Menu Options
-PREFERENCES_METADATA;Metadata
 PREFERENCES_MONINTENT;Default rendering intent
 PREFERENCES_MONITOR;Monitor
 PREFERENCES_MONPROFILE;Default color profile
@@ -1241,9 +1215,7 @@ PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
 PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
 PREFERENCES_TP_LABEL;Tool panel:
 PREFERENCES_TP_VSCROLLBAR;Hide vertical scrollbar
-PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
 PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
 PREFERENCES_WORKFLOW;Layout
 PROFILEPANEL_COPYPPASTE;Parameters to copy
 PROFILEPANEL_GLOBALPROFILES;Bundled profiles
@@ -1458,8 +1430,6 @@ TP_COLORAPP_SURROUND_DARK;Dark
 TP_COLORAPP_SURROUND_DIM;Dim
 TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
 TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\n<b>Average</b>: Average light environment (standard). The image will not change.\n\n<b>Dim</b>: Dim environment (TV). The image will become slighty dark.\n\n<b>Dark</b>: Dark environment (projector). The image will become more dark.\n\n<b>Extremly Dark</b>: Extremly dark environment (cutsheet). The image will become very dark.
-TP_COLORAPP_SURSOURCE;Dark surround
-TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
 TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
 TP_COLORAPP_TCMODE_CHROMA;Chroma
 TP_COLORAPP_TCMODE_COLORF;Colorfulness
@@ -1561,7 +1531,6 @@ TP_DEHAZE_SHOW_DEPTH_MAP;Show depth map
 TP_DEHAZE_STRENGTH;Strength
 TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
 TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
 TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
 TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
 TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
@@ -1579,8 +1548,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Preview noise: Mean=%1  High=%2
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= -   High= -
 TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2  Ty=%3
 TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-TP_DIRPYRDENOISE_ENH;Enhanced mode
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
 TP_DIRPYRDENOISE_LABEL;Noise Reduction
 TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
 TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
@@ -1609,7 +1576,6 @@ TP_DIRPYRDENOISE_MEDIAN_PASSES;Median iterations
 TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
 TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
 TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-TP_DIRPYRDENOISE_SLI;Slider
 TP_DIRPYRDENOISE_TYPE_3X3;3×3
 TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
 TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1714,8 +1680,6 @@ TP_ICM_APPLYHUESATMAP;Base table
 TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
 TP_ICM_APPLYLOOKTABLE;Look table
 TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-TP_ICM_BLENDCMSMATRIX;Blend ICC highlights with matrix
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Enable to recover clipped highlights when using LUT-based ICC profiles.
 TP_ICM_BPC;Black Point Compensation
 TP_ICM_DCPILLUMINANT;Illuminant
 TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
@@ -1846,7 +1810,6 @@ TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is ch
 TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
 TP_RAWCACORR_CABLUE;Blue
 TP_RAWCACORR_CARED;Red
-TP_RAWCACORR_CASTR;Strength
 TP_RAWEXPOS_BLACKS;Black Levels
 TP_RAWEXPOS_BLACK_0;Green 1 (lead)
 TP_RAWEXPOS_BLACK_1;Red
@@ -1905,15 +1868,12 @@ TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to th
 TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
 TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
 TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
 TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
 TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
 TP_RAW_PIXELSHIFTMM_AUTO;Automatic
 TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
 TP_RAW_PIXELSHIFTMM_OFF;Off
 TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
 TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
 TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
 TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -1962,7 +1922,6 @@ TP_RETINEX_GAIN;Gain
 TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
 TP_RETINEX_GAINTRANSMISSION;Gain transmission
 TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
 TP_RETINEX_GAMMA;Gamma
 TP_RETINEX_GAMMA_FREE;Free
 TP_RETINEX_GAMMA_HIGH;High
@@ -2040,10 +1999,8 @@ TP_SAVEDIALOG_OK_TIP;Shortcut: <b>Ctrl-Enter</b>
 TP_SHADOWSHLIGHTS_HIGHLIGHTS;Highlights
 TP_SHADOWSHLIGHTS_HLTONALW;Highlights tonal width
 TP_SHADOWSHLIGHTS_LABEL;Shadows/Highlights
-TP_SHADOWSHLIGHTS_LOCALCONTR;Local contrast
 TP_SHADOWSHLIGHTS_RADIUS;Radius
 TP_SHADOWSHLIGHTS_SHADOWS;Shadows
-TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
 TP_SHADOWSHLIGHTS_SHTONALW;Shadows tonal width
 TP_SHARPENEDGE_AMOUNT;Quantity
 TP_SHARPENEDGE_LABEL;Edges