Merge branch 'dev' into preprocess_wb

This commit is contained in:
rom9
2020-05-13 19:47:09 +02:00
81 changed files with 4427 additions and 1344 deletions

View File

@@ -567,10 +567,10 @@ HISTORY_MSG_314;W - Gamut - Reduce artifacts
HISTORY_MSG_315;W - Residual - Contrast
HISTORY_MSG_316;W - Gamut - Skin tar/prot
HISTORY_MSG_317;W - Gamut - Skin hue
HISTORY_MSG_318;W - Contrast - Highlight levels
HISTORY_MSG_319;W - Contrast - Highlight range
HISTORY_MSG_320;W - Contrast - Shadow range
HISTORY_MSG_321;W - Contrast - Shadow levels
HISTORY_MSG_318;W - Contrast - Fine levels
HISTORY_MSG_319;W - Contrast - Fine range
HISTORY_MSG_320;W - Contrast - Coarse range
HISTORY_MSG_321;W - Contrast - Coarse levels
HISTORY_MSG_322;W - Gamut - Avoid color shift
HISTORY_MSG_323;W - ES - Local contrast
HISTORY_MSG_324;W - Chroma - Pastel
@@ -752,6 +752,7 @@ HISTORY_MSG_DEHAZE_STRENGTH;Dehaze - Strength
HISTORY_MSG_DUALDEMOSAIC_AUTO_CONTRAST;Dual demosaic - Auto threshold
HISTORY_MSG_DUALDEMOSAIC_CONTRAST;Dual demosaic - Contrast threshold
HISTORY_MSG_FILMNEGATIVE_ENABLED;Film Negative
HISTORY_MSG_FILMNEGATIVE_FILMBASE;Film base color
HISTORY_MSG_FILMNEGATIVE_VALUES;Film negative values
HISTORY_MSG_HISTMATCHING;Auto-matched tone curve
HISTORY_MSG_ICM_OUTPUT_PRIMARIES;Output - Primaries
@@ -760,6 +761,7 @@ HISTORY_MSG_ICM_OUTPUT_TYPE;Output - Type
HISTORY_MSG_ICM_WORKING_GAMMA;Working - Gamma
HISTORY_MSG_ICM_WORKING_SLOPE;Working - Slope
HISTORY_MSG_ICM_WORKING_TRC_METHOD;Working - TRC method
HISTORY_MSG_ILLUM;Illuminant
HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness
HISTORY_MSG_LOCALCONTRAST_ENABLED;Local Contrast
@@ -791,6 +793,10 @@ HISTORY_MSG_SOFTLIGHT_STRENGTH;Soft light - Strength
HISTORY_MSG_TEMPOUT;CAM02 automatic temperature
HISTORY_MSG_TM_FATTAL_ANCHOR;DRC - Anchor
HISTORY_MSG_TRANS_Method;Geometry - Method
HISTORY_MSG_WAVBALCHROM;Equalizer chrominance
HISTORY_MSG_WAVBALLUM;Equalizer luminance
HISTORY_MSG_WAVCHROMFI;Chroma fine
HISTORY_MSG_WAVCHROMCO;Chroma coarse
HISTORY_MSG_WAVCLARI;Clarity
HISTORY_MSG_WAVEDGS;Edge stopping
HISTORY_MSG_WAVMERGEC;Merge C
@@ -798,10 +804,26 @@ HISTORY_MSG_WAVMERGEL;Merge L
HISTORY_MSG_WAVRADIUS;Radius Shadows-Highlight
HISTORY_MSG_WAVSCALE;Scale
HISTORY_MSG_WAVSHOWMASK;Show wavelet mask
HISTORY_MSG_WAVSIGMA;Sigma
HISTORY_MSG_WAVSIGMA;Damper
HISTORY_MSG_WAVSOFTRAD;Soft radius clarity
HISTORY_MSG_WAVSOFTRADEND;Soft radius final
HISTORY_MSG_WAVUSHAMET;Clarity method
HISTORY_MSG_THRESWAV;Balance threshold
HISTORY_MSG_BLUWAV;Damper
HISTORY_MSG_WAVOLDSH;Old algorithm
HISTORY_MSG_WAVOFFSET;Offset
HISTORY_MSG_WAVLOWTHR;Threshold low contrast
HISTORY_MSG_BLSHAPE;Blur by level
HISTORY_MSG_WAVBL;Blur levels
HISTORY_MSG_BLURWAV;Blur luminance
HISTORY_MSG_BLURCWAV;Blur chroma
HISTORY_MSG_EDGEFFECT;Edge Damper
HISTORY_MSG_SIGMAFIN;Final contrast Damper
HISTORY_MSG_SIGMATON;Toning Damper
HISTORY_MSG_SIGMACOL;Chroma Damper
HISTORY_MSG_SIGMADIR;Dir Damper
HISTORY_MSG_RANGEAB;Range ab
HISTORY_MSG_PROTAB;Protection
HISTORY_NEWSNAPSHOT;Add
HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: <b>Alt-s</b>
HISTORY_SNAPSHOT;Snapshot
@@ -1440,6 +1462,16 @@ TP_COLORAPP_GAMUT;Gamut control (L*a*b*)
TP_COLORAPP_GAMUT_TOOLTIP;Allow gamut control in L*a*b* mode.
TP_COLORAPP_HUE;Hue (h)
TP_COLORAPP_HUE_TOOLTIP;Hue (h) - angle between 0° and 360°.
TP_COLORAPP_ILLUM;Illuminant
TP_COLORAPP_ILLUM_TOOLTIP;Select the illuminant closest to the shooting conditions.\nIn general D50, but it can change depending on the time and lattitude.
TP_COLORAPP_ILA;Incandescent StdA 2856K
TP_COLORAPP_IL41;D41
TP_COLORAPP_IL50;D50
TP_COLORAPP_IL55;D55
TP_COLORAPP_IL60;D60
TP_COLORAPP_IL65;D65
TP_COLORAPP_IL75;D75
TP_COLORAPP_ILFREE;Free
TP_COLORAPP_LABEL;CIE Color Appearance Model 2002
TP_COLORAPP_LABEL_CAM02;Image Adjustments
TP_COLORAPP_LABEL_SCENE;Scene Conditions
@@ -1452,7 +1484,7 @@ TP_COLORAPP_MODEL_TOOLTIP;White-Point Model.\n\n<b>WB [RT] + [output]</b>: RT's
TP_COLORAPP_NEUTRAL;Reset
TP_COLORAPP_NEUTRAL_TIP;Reset all sliders checkbox and curves to their default values
TP_COLORAPP_PRESETCAT02;Preset cat02 automatic
TP_COLORAPP_PRESETCAT02_TIP;Set combobox, sliders, temp, green so that Cat02 automatic is preset.\nYou must change Cat02 adaptation Viewing conditions if need.\nYou can change Temperature and Tint Viewing conditions if need, and other settings if need.
TP_COLORAPP_PRESETCAT02_TIP;Set combobox, sliders, temp, green so that Cat02 automatic is preset.\nYou can change illuminant shooting conditions.\nYou must change Cat02 adaptation Viewing conditions if need.\nYou can change Temperature and Tint Viewing conditions if need, and other settings if need.
TP_COLORAPP_RSTPRO;Red & skin-tones protection
TP_COLORAPP_RSTPRO_TOOLTIP;Red &amp; skin-tones protection affects both sliders and curves.
TP_COLORAPP_SURROUND;Surround
@@ -1469,7 +1501,8 @@ TP_COLORAPP_TCMODE_LABEL2;Curve mode 2
TP_COLORAPP_TCMODE_LABEL3;Curve chroma mode
TP_COLORAPP_TCMODE_LIGHTNESS;Lightness
TP_COLORAPP_TCMODE_SATUR;Saturation
TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD50 temp=5003\nD55 temp=5503\nD65 temp=6504\nD75 temp=7504
TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD41 temp=4100\nD50 temp=5003\nD55 temp=5503\nD60 temp=6000\nD65 temp=6504\nD75 temp=7504
TP_COLORAPP_TEMP2_TOOLTIP;Either symmetrical mode temp = White balance.\nEither select illuminant always set Tint=1.\n\nA temp=2856\nD41 temp=4100\nD50 temp=5003\nD55 temp=5503\nD60 temp=6000\nD65 temp=6504\nD75 temp=7504
TP_COLORAPP_TEMPOUT_TOOLTIP;Disable to chnage temperature and tint
TP_COLORAPP_TONECIE;Tone mapping using CIECAM02
TP_COLORAPP_TONECIE_TOOLTIP;If this option is disabled, tone mapping is done in L*a*b* space.\nIf this option is enabled, tone mapping is done using CIECAM02.\nThe Tone Mapping tool must be enabled for this setting to take effect.
@@ -1669,6 +1702,9 @@ TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard
TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points
TP_EXPOS_WHITEPOINT_LABEL;Raw White Points
TP_FILMNEGATIVE_BLUE;Blue ratio
TP_FILMNEGATIVE_FILMBASE_PICK;Pick film base color
TP_FILMNEGATIVE_FILMBASE_TOOLTIP;Pick a spot of unexposed film (eg. the border between frames), to get the actual film base color values, and save them in the processing profile.\nThis makes it easy to get a more consistent color balance when batch-processing multiple pictures from the same roll.\nAlso use this when the converted image is extremely dark, bright, or color-unbalanced.
TP_FILMNEGATIVE_FILMBASE_VALUES;Film base RGB:
TP_FILMNEGATIVE_GREEN;Reference exponent (contrast)
TP_FILMNEGATIVE_GUESS_TOOLTIP;Automatically set the red and blue ratios by picking two patches which had a neutral hue (no color) in the original scene. The patches should differ in brightness. Set the white balance afterwards.
TP_FILMNEGATIVE_LABEL;Film Negative
@@ -2124,11 +2160,16 @@ TP_WAVELET_BACKGROUND;Background
TP_WAVELET_BACUR;Curve
TP_WAVELET_BALANCE;Contrast balance d/v-h
TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified.
TP_WAVELET_BALCHRO;Chroma balance
TP_WAVELET_BALCHRO;Chrominance balance
TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance.
TP_WAVELET_BALCHROM;Denoise Equalizer Blue-Red
TP_WAVELET_BALLUM;Denoise Equalizer White-Black
TP_WAVELET_BANONE;None
TP_WAVELET_BASLI;Slider
TP_WAVELET_BATYPE;Contrast balance method
TP_WAVELET_BLCURVE;Blur by levels
TP_WAVELET_BLURFRAME;Blur
TP_WAVELET_BLUWAV;Damper
TP_WAVELET_CBENAB;Toning and Color Balance
TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted
TP_WAVELET_CCURVE;Local contrast
@@ -2138,9 +2179,13 @@ TP_WAVELET_CH3;Link contrast levels
TP_WAVELET_CHCU;Curve
TP_WAVELET_CHR;Chroma-contrast link strength
TP_WAVELET_CHRO;Saturated/pastel threshold
TP_WAVELET_CHROFRAME;Denoise Chrominance
TP_WAVELET_CHROMAFRAME;Chroma
TP_WAVELET_CHROMCO;Chrominance Coarse
TP_WAVELET_CHROMFI;Chrominance Fine
TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored.
TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength"
TP_WAVELET_CHRWAV;Blur chroma
TP_WAVELET_CHSL;Sliders
TP_WAVELET_CHTYPE;Chrominance method
TP_WAVELET_CLA;Clarity
@@ -2151,8 +2196,10 @@ TP_WAVELET_COMPGAMMA;Compression gamma
TP_WAVELET_COMPGAMMA_TOOLTIP;Adjusting the gamma of the residual image allows you to equilibrate the data and histogram.
TP_WAVELET_COMPTM;Tone mapping
TP_WAVELET_CONTEDIT;'After' contrast curve
TP_WAVELET_CONTFRAME;Contrast - Compression
TP_WAVELET_CONTR;Gamut
TP_WAVELET_CONTRA;Contrast
TP_WAVELET_CONTRASTEDIT;Finer - Coarser levels
TP_WAVELET_CONTRAST_MINUS;Contrast -
TP_WAVELET_CONTRAST_PLUS;Contrast +
TP_WAVELET_CONTRA_TOOLTIP;Changes contrast of the residual image.
@@ -2172,6 +2219,7 @@ TP_WAVELET_DAUB6;D6 - standard plus
TP_WAVELET_DAUB10;D10 - medium
TP_WAVELET_DAUB14;D14 - high
TP_WAVELET_DAUB_TOOLTIP;Changes Daubechies coefficients:\nD4 = Standard,\nD14 = Often best performance, 10% more time-intensive.\n\nAffects edge detection as well as the general quality of the firsts levels. However the quality is not strictly related to this coefficient and can vary with images and uses.
TP_WAVELET_DIRFRAME;Directional contrast
TP_WAVELET_DONE;Vertical
TP_WAVELET_DTHR;Diagonal
TP_WAVELET_DTWO;Horizontal
@@ -2185,6 +2233,8 @@ TP_WAVELET_EDGEDETECTTHR;Threshold low (noise)
TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection)
TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky.
TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise.
TP_WAVELET_EDEFFECT;Damper
TP_WAVELET_EDEFFECT_TOOLTIP;This slider controls how wide the range of contrast values are that receive the maximum effect from the tool.\nMaximum value (2.5) disabled the tool
TP_WAVELET_EDGESENSI;Edge sensitivity
TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
TP_WAVELET_EDGTHRESH;Detail
@@ -2195,10 +2245,12 @@ TP_WAVELET_EDSL;Threshold Sliders
TP_WAVELET_EDTYPE;Local contrast method
TP_WAVELET_EDVAL;Strength
TP_WAVELET_FINAL;Final Touchup
TP_WAVELET_FINCFRAME;Final Local Contrast
TP_WAVELET_FINEST;Finest
TP_WAVELET_HIGHLIGHT;Highlight luminance range
TP_WAVELET_HIGHLIGHT;Finer levels luminance range
TP_WAVELET_FINCOAR_TOOLTIP;The left (positive) part of the curve acts on the finer levels (increase).\nThe 2 points on the abscissa represent the respective action limits of finer and coarser levels 5 and 6 (default).\nThe right (negative) part of the curve acts on the coarser levels (increase).\nAvoid moving the left part of the curve with negative values. Avoid moving the right part of the curve with positives values
TP_WAVELET_HS1;Whole luminance range
TP_WAVELET_HS2;Shadows/Highlights
TP_WAVELET_HS2;Selective luminance range
TP_WAVELET_HUESKIN;Skin hue
TP_WAVELET_HUESKIN_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the <b>white balance is incorrect</b>.
TP_WAVELET_HUESKY;Sky hue
@@ -2208,10 +2260,10 @@ TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight
TP_WAVELET_LABEL;Wavelet Levels
TP_WAVELET_LARGEST;Coarsest
TP_WAVELET_LEVCH;Chroma
TP_WAVELET_LEVDIR_ALL;All levels in all directions
TP_WAVELET_LEVDIR_INF;Below or equal the level
TP_WAVELET_LEVDIR_ALL;All levels, in all directions
TP_WAVELET_LEVDIR_INF;Finer details levels, with selected level
TP_WAVELET_LEVDIR_ONE;One level
TP_WAVELET_LEVDIR_SUP;Above the level
TP_WAVELET_LEVDIR_SUP;Coarser details levels, without selected level
TP_WAVELET_LEVELS;Wavelet levels
TP_WAVELET_LEVELS_TOOLTIP;Choose the number of detail levels the image is to be decomposed into. More levels require more RAM and require a longer processing time.
TP_WAVELET_LEVF;Contrast
@@ -2222,7 +2274,8 @@ TP_WAVELET_LEVTWO;Level 3
TP_WAVELET_LEVZERO;Level 1
TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength
TP_WAVELET_LIPST;Enhanced algoritm
TP_WAVELET_LOWLIGHT;Shadow luminance range
TP_WAVELET_LOWLIGHT;Coarser levels luminance range
TP_WAVELET_LOWTHR_TOOLTIP;Prevents amplification of fine textures and noise
TP_WAVELET_MEDGREINF;First level
TP_WAVELET_MEDI;Reduce artifacts in blue sky
TP_WAVELET_MEDILEV;Edge detection
@@ -2232,21 +2285,28 @@ TP_WAVELET_MERGEL;Merge Luma
TP_WAVELET_NEUTRAL;Neutral
TP_WAVELET_NOIS;Denoise
TP_WAVELET_NOISE;Denoise and Refine
TP_WAVELET_NOISE_TOOLTIP;If level 4 luminance denoise superior to 20, mode Agressive is used.\nIf chrominance coarse superior to 20, mode Agressive is used.
TP_WAVELET_NPHIGH;High
TP_WAVELET_NPLOW;Low
TP_WAVELET_NPNONE;None
TP_WAVELET_NPTYPE;Neighboring pixels
TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced.
TP_WAVELET_OLDSH;Algorithm using negatives values
TP_WAVELET_OPACITY;Opacity Blue-Yellow
TP_WAVELET_OPACITYW;Contrast balance d/v-h curve
TP_WAVELET_OPACITYWL;Final local contrast
TP_WAVELET_OPACITYWL;Local contrast
TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right.
TP_WAVELET_PASTEL;Pastel chroma
TP_WAVELET_PROC;Process
TP_WAVELET_PROTAB;Protection
TP_WAVELET_RADIUS;Radius Shadows - Highlight
TP_WAVELET_RANGEAB;Range a and b %
TP_WAVELET_RE1;Reinforced
TP_WAVELET_RE2;Unchanged
TP_WAVELET_RE3;Reduced
TP_WAVELET_RESBLUR;Blur Luminance
TP_WAVELET_RESBLURC;Blur Chroma
TP_WAVELET_RESBLUR_TOOLTIP;Disabled if zoom > about 500%
TP_WAVELET_RESCHRO;Intensity
TP_WAVELET_RESCON;Shadows
TP_WAVELET_RESCONH;Highlights
@@ -2254,8 +2314,11 @@ TP_WAVELET_RESID;Residual Image
TP_WAVELET_SAT;Saturated chroma
TP_WAVELET_SETTINGS;Wavelet Settings
TP_WAVELET_SHA;Sharp mask
TP_WAVELET_SHFRAME;Shadows/Highlights
TP_WAVELET_SHOWMASK;Show wavelet 'mask'
TP_WAVELET_SIGMA;Sigma
TP_WAVELET_SIGMA;Damper
TP_WAVELET_SIGMAFIN;Damper
TP_WAVELET_SIGMA_TOOLTIP;The effect of the contrast sliders is stronger in medium contrast details, and weaker in high and low contrast details.\n With this slider you can control how quickly the effect dampens towards the extreme contrasts.\n The higher the slider is set, the wider the range of contrasts which will get a strong change, and the higher the risk to generate artifacts.\n The lower it is, the more pinpoint will the effect be applied to a narrow range of contrast values.
TP_WAVELET_SKIN;Skin targetting/protection
TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
TP_WAVELET_SKY;Sky targetting/protection
@@ -2265,26 +2328,33 @@ TP_WAVELET_STREN;Strength
TP_WAVELET_STRENGTH;Strength
TP_WAVELET_SUPE;Extra
TP_WAVELET_THR;Shadows threshold
TP_WAVELET_THRESHOLD;Highlight levels
TP_WAVELET_THRESHOLD2;Shadow levels
TP_WAVELET_THRESHOLD2_TOOLTIP;Only levels between 9 and 9 minus the value will be affected by the shadow luminance range. Other levels will be fully treated. The highest level possible is limited by the highlight level value (9 minus highlight level value).
TP_WAVELET_THRESHOLD_TOOLTIP;Only levels beyond the chosen value will be affected by the highlight luminance range. Other levels will be fully treated. The chosen value here limits the highest possible value of the shadow levels.
TP_WAVELET_THRESHOLD;Finer levels
TP_WAVELET_THRESHOLD2;Coarser levels
TP_WAVELET_THRESHOLD_TOOLTIP;Only levels beyond the chosen value will be affected by the highlight luminance range. Other levels will be fully treated. The chosen value here limits the highest possible value of the shadow levels. : All levels from level 1 up to the chosen value will only be affected within the Finer levels luminance range.\nAll other levels will have the whole range of luminances affected, unless the Coarser levels setting limits it.\nThe chosen value in this slider becomes the minimum possible value of the Coarser levels.
TP_WAVELET_THRESHOLD2_TOOLTIP;Only levels between 9 and 9 minus the value will be affected by the shadow luminance range. Other levels will be fully treated. The highest level possible is limited by the highlight level value (9 minus highlight level value). : Only levels between the chosen value and level 9/Extra will be affected by the Coarser levels luminance range.\nAll other levels will have the whole range of luminances affected, unless the Finer levels setting limits it.\nThe lower level possible that will be considered by the algorithm is limited by the Finer levels value.
TP_WAVELET_THRESWAV;Balance Threshold
TP_WAVELET_THRH;Highlights threshold
TP_WAVELET_TILESBIG;Big tiles
TP_WAVELET_TILESBIG;Tiles
TP_WAVELET_TILESFULL;Full image
TP_WAVELET_TILESIZE;Tiling method
TP_WAVELET_TILESLIT;Little tiles
TP_WAVELET_TILES_TOOLTIP;Processing the full image leads to better quality and is the recommended option, while using tiles is a fall-back solution for users with little RAM. Refer to RawPedia for memory requirements.
TP_WAVELET_BL;Blur levels
TP_WAVELET_TMEDGS;Edge stopping
TP_WAVELET_TMSCALE;Scale
TP_WAVELET_TMSTRENGTH;Compression strength
TP_WAVELET_TMSTRENGTH_TOOLTIP;Control the strength of tone mapping or contrast compression of the residual image.
TP_WAVELET_TMTYPE;Compression method
TP_WAVELET_TMEDGS;Edge stopping
TP_WAVELET_TON;Toning
TP_WAVELET_TONFRAME;Excluded Colors
TP_WAVELET_TMTYPE;Compression method
TP_WAVELET_USH;None
TP_WAVELET_USHARP;Clarity method
TP_WAVELET_USHARP_TOOLTIP;Origin : the source file is the file before Wavelet.\nWavelet : the source file is the file including wavelet threatment
TP_WAVELET_USH_TOOLTIP;If you select Sharp-mask, wavelet settings will be automatically positioned :\nBackground=black, Process=below, level=3...you can change level between 1 and 4.\n\nIf you select Clarity, wavelet settings will be automatically positioned :\nBackground=residual, Process=above, level=7..you can change level between 5 and 10 and wavelet levels.
TP_WAVELET_WAVLOWTHR;Low contrast threshold
TP_WAVELET_WAVOFFSET;Offset
TP_WAVELET_OFFSET_TOOLTIP;Offset modifies the balance between shadows and highlights.\nHigh values here will amplify the contrast change of the highlights, whereas low values will amplify the contrast change of the shadows.\nAlong with a low Damper value you will able to select the contrasts that will be enhanced.
TP_WBALANCE_AUTO;Auto
TP_WBALANCE_AUTOITCGREEN;Auto iterate temperature correlation
TP_WBALANCE_AUTOOLD;Auto RGB grey