generateTranslationDiffs
This commit is contained in:
@@ -1292,8 +1292,14 @@ ZOOMPANEL_ZOOMOUT;Удалить <b>-</b>
|
||||
!DYNPROFILEEDITOR_PROFILE;Processing Profile
|
||||
!EDIT_OBJECT_TOOLTIP;Displays a widget on the preview window which lets you adjust this tool.
|
||||
!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
|
||||
!EXPORT_BYPASS;Processing steps to bypass
|
||||
!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
|
||||
!EXPORT_PIPELINE;Processing pipeline
|
||||
!EXPORT_USE_FAST_PIPELINE;Dedicated (full processing on resized image)
|
||||
!EXPORT_USE_FAST_PIPELINE_TIP;Use a dedicated processing pipeline for images in Fast Export mode, that trades speed for quality. Resizing of the image is done as early as possible, instead of doing it at the end like in the normal pipeline. The speedup can be significant, but be prepared to see artifacts and a general degradation of output quality.
|
||||
!EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
|
||||
!FILEBROWSER_POPUPRANK0;Unrank
|
||||
!FILEBROWSER_RESETDEFAULTPROFILE;Reset to default
|
||||
!FILEBROWSER_SHOWNOTTRASHHINT;Show only non-deleted images.
|
||||
!FILEBROWSER_SHOWORIGINALHINT;Show only original images.\n\nWhen several images exist with the same filename but different extensions, the one considered original is the one whose extension is nearest the top of the parsed extensions list in Preferences > File Browser > Parsed Extensions.
|
||||
!FILECHOOSER_FILTER_ANY;All files
|
||||
@@ -1578,7 +1584,10 @@ ZOOMPANEL_ZOOMOUT;Удалить <b>-</b>
|
||||
!PARTIALPASTE_PREPROCESS_DEADPIXFILT;Dead pixel filter
|
||||
!PARTIALPASTE_PREPROCESS_HOTPIXFILT;Hot pixel filter
|
||||
!PARTIALPASTE_PRSHARPENING;Post-resize sharpening
|
||||
!PARTIALPASTE_RAWCACORR_CAAUTOSTRENGTH;CA auto-correction strength
|
||||
!PARTIALPASTE_RAWCACORR_CAREDBLUE;CA red & blue
|
||||
!PARTIALPASTE_RAW_IMAGENUM;Sub-image
|
||||
!PARTIALPASTE_RAW_PIXELSHIFT;PixelShift
|
||||
!PARTIALPASTE_RETINEX;Retinex
|
||||
!PARTIALPASTE_WAVELETGROUP;Wavelet Levels
|
||||
!PREFERENCES_AUTLISLOW;Low
|
||||
@@ -1600,6 +1609,8 @@ ZOOMPANEL_ZOOMOUT;Удалить <b>-</b>
|
||||
!PREFERENCES_DAUB_LABEL;Use Daubechies D6 wavelets instead of D4
|
||||
!PREFERENCES_DAUB_TOOLTIP;The Noise Reduction and Wavelet Levels tools use a Debauchies mother wavelet. If you choose D6 instead of D4 you increase the number of orthogonal Daubechies coefficients and probably increase quality of small-scale levels. There is no memory or processing time difference between the two.
|
||||
!PREFERENCES_EXPAUT;Expert
|
||||
!PREFERENCES_EXTENDEDZOOMLEVELS;Use finer-grained zoom levels for "fit to screen" zooming
|
||||
!PREFERENCES_EXTENDEDZOOMLEVELS_TOOLTIP;This allows to better fill the editor window when using one of the "fit to screen" zoom modes. However, the preview quality might be slightly degraded, depending on the actual zoom factor computed.
|
||||
!PREFERENCES_FILMSIMULATION;Film Simulation
|
||||
!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
|
||||
!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
|
||||
@@ -1838,23 +1849,23 @@ ZOOMPANEL_ZOOMOUT;Удалить <b>-</b>
|
||||
!TP_RAWEXPOS_BLACK_GREEN;Green
|
||||
!TP_RAWEXPOS_BLACK_RED;Red
|
||||
!TP_RAWEXPOS_RGB;Red, Green, Blue
|
||||
!TP_RAW_1-PASS (MEDIUM);1-pass (medium)
|
||||
!TP_RAW_3-PASS (BEST);3-pass (best)
|
||||
!TP_RAW_AHD;ahd
|
||||
!TP_RAW_1PASSMEDIUM;1-Pass (Medium)
|
||||
!TP_RAW_3PASSBEST;3-Pass (Best)
|
||||
!TP_RAW_AHD;AHD
|
||||
!TP_RAW_AMAZE;AMaZE
|
||||
!TP_RAW_DCB;dcb
|
||||
!TP_RAW_EAHD;eahd
|
||||
!TP_RAW_FAST;fast
|
||||
!TP_RAW_DCB;DCB
|
||||
!TP_RAW_EAHD;EAHD
|
||||
!TP_RAW_FAST;Fast
|
||||
!TP_RAW_HD;Threshold
|
||||
!TP_RAW_HD_TOOLTIP;Lower values make hot/dead pixel detection more aggressive, but false positives may lead to artifacts. If you notice any artifacts appearing when enabling the Hot/Dead Pixel Filters, gradually increase the threshold value until they disappear.
|
||||
!TP_RAW_HPHD;hphd
|
||||
!TP_RAW_IGV;igv
|
||||
!TP_RAW_HPHD;HPHD
|
||||
!TP_RAW_IGV;IGV
|
||||
!TP_RAW_IMAGENUM;Sub-image
|
||||
!TP_RAW_IMAGENUM_TOOLTIP;Some raw files might embed several sub-images (HDR, Pixel-Shift, Dual Sensitivity). Use this button to select the sub-image.\n\nThe last sub-image will be used if you select a value beyond the real sub-image count.
|
||||
!TP_RAW_LMMSE;lmmse
|
||||
!TP_RAW_MONO;mono
|
||||
!TP_RAW_NONE;none (show sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift (Pentax)
|
||||
!TP_RAW_IMAGENUM_TOOLTIP;Some raw files might embed several sub-images (HDR, Pixel Shift, Dual Pixel, Dual Sensitivity). Use this button to select the sub-image.
|
||||
!TP_RAW_LMMSE;LMMSE
|
||||
!TP_RAW_MONO;Mono
|
||||
!TP_RAW_NONE;None (Shows sensor pattern)
|
||||
!TP_RAW_PIXELSHIFT;Pixel Shift
|
||||
!TP_RAW_PIXELSHIFTADAPTIVE;Adaptive detection
|
||||
!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
|
||||
!TP_RAW_PIXELSHIFTBLUR_TOOLTIP;Blur motion mask
|
||||
@@ -1903,7 +1914,7 @@ ZOOMPANEL_ZOOMOUT;Удалить <b>-</b>
|
||||
!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
|
||||
!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
|
||||
!TP_RAW_SENSOR_XTRANS_LABEL;Sensor with X-Trans Matrix
|
||||
!TP_RAW_VNG4;vng4
|
||||
!TP_RAW_VNG4;VNG4
|
||||
!TP_RETINEX_CONTEDIT_HSL;Histogram equalizer HSL
|
||||
!TP_RETINEX_CONTEDIT_LAB;Histogram equalizer L*a*b*
|
||||
!TP_RETINEX_CONTEDIT_LH;Hue equalizer
|
||||
|
Reference in New Issue
Block a user