diff --git a/rtdata/languages/Catala b/rtdata/languages/Catala index b66b3481f..0bf23a561 100644 --- a/rtdata/languages/Catala +++ b/rtdata/languages/Catala @@ -1214,14 +1214,14 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: - !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -1270,6 +1270,10 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: - !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s !MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4 !MAIN_BUTTON_NAVPREV_TOOLTIP;Navigate to the previous image relative to image opened in the Editor.\nShortcut: Shift-F3\n\nTo navigate to the previous image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F3 @@ -1643,6 +1647,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: - !TP_EPD_GAMMA;Gamma !TP_EPD_TOOLTIP;Tone mapping is possible in L*a*b* mode (standard) and CIECAM02 mode.\n\nWhen in L*a*b* mode, tone mapping can also be used on the residual image of the Wavelet Levels tool.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)" !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points !TP_EXPOS_WHITEPOINT_LABEL;Raw White Points !TP_FILMSIMULATION_LABEL;Film Simulation @@ -1674,6 +1679,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: - !TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated !TP_ICM_DCPILLUMINANT_TOOLTIP;Select which embedded DCP illuminant to employ. Default is "interpolated" which is a mix between the two based on white balance. The setting is only enabled if a Dual-Illuminant DCP with interpolation support is selected. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_LABCURVE_CHROMA_TOOLTIP;To apply B&W toning, set Chromaticity to -100. !TP_LABCURVE_CURVEEDITOR_CL;CL @@ -1738,9 +1744,9 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: - !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1748,14 +1754,14 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: - !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1792,11 +1798,13 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: - !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1819,7 +1827,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: - !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1829,32 +1837,39 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: - !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Chinese (Simplified) b/rtdata/languages/Chinese (Simplified) index b261cf642..3a74f85d0 100644 --- a/rtdata/languages/Chinese (Simplified) +++ b/rtdata/languages/Chinese (Simplified) @@ -1128,14 +1128,14 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: - !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -1184,6 +1184,10 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: - !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4 !MAIN_BUTTON_NAVPREV_TOOLTIP;Navigate to the previous image relative to image opened in the Editor.\nShortcut: Shift-F3\n\nTo navigate to the previous image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F3 !MAIN_BUTTON_NAVSYNC_TOOLTIP;Synchronize the File Browser or Filmstrip with the Editor to reveal the thumbnail of the currently opened image, and clear any active filters.\nShortcut: x\n\nAs above, but without clearing active filters:\nShortcut: y\n(Note that the thumbnail of the opened image will not be shown if filtered out). @@ -1583,6 +1587,7 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: - !TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary. !TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation. !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points !TP_EXPOS_WHITEPOINT_LABEL;Raw White Points !TP_FILMSIMULATION_LABEL;Film Simulation @@ -1611,6 +1616,7 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: - !TP_ICM_INPUTCAMERA_TOOLTIP;Use a simple color matrix from dcraw, an enhanced RawTherapee version (whichever is available based on camera model) or one embedded in the DNG. !TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only enabled if the selected DCP has a tone curve. !TP_LABCURVE_CHROMA_TOOLTIP;To apply B&W toning, set Chromaticity to -100. @@ -1721,9 +1727,9 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: - !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1731,14 +1737,14 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: - !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1775,11 +1781,13 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: - !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1802,7 +1810,7 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: - !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1812,32 +1820,39 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: - !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Chinese (Traditional) b/rtdata/languages/Chinese (Traditional) index 14da63234..93fe01b9d 100644 --- a/rtdata/languages/Chinese (Traditional) +++ b/rtdata/languages/Chinese (Traditional) @@ -862,14 +862,14 @@ TP_WBALANCE_TEMPERATURE;色溫 !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -918,6 +918,10 @@ TP_WBALANCE_TEMPERATURE;色溫 !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s !MAIN_BUTTON_FULLSCREEN;Fullscreen !MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4 @@ -1481,6 +1485,7 @@ TP_WBALANCE_TEMPERATURE;色溫 !TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1 !TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2 !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending !TP_EXPOSURE_TCMODE_STANDARD;Standard !TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard @@ -1542,6 +1547,7 @@ TP_WBALANCE_TEMPERATURE;色溫 !TP_ICM_INPUTNONE;No profile !TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_ICM_TONECURVE;Tone curve !TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only enabled if the selected DCP has a tone curve. @@ -1706,9 +1712,9 @@ TP_WBALANCE_TEMPERATURE;色溫 !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1716,14 +1722,14 @@ TP_WBALANCE_TEMPERATURE;色溫 !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1760,11 +1766,13 @@ TP_WBALANCE_TEMPERATURE;色溫 !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1787,7 +1795,7 @@ TP_WBALANCE_TEMPERATURE;色溫 !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1797,32 +1805,39 @@ TP_WBALANCE_TEMPERATURE;色溫 !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Czech b/rtdata/languages/Czech index 065b26b5e..21a838d71 100644 --- a/rtdata/languages/Czech +++ b/rtdata/languages/Czech @@ -1754,14 +1754,14 @@ ZOOMPANEL_ZOOMOUT;Oddálit\nZkratka: - !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -1810,6 +1810,10 @@ ZOOMPANEL_ZOOMOUT;Oddálit\nZkratka: - !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !MAIN_TAB_WAVELET;Wavelet !MAIN_TAB_WAVELET_TOOLTIP;Shortcut: Alt-w !PARTIALPASTE_WAVELETGROUP;Wavelet Levels @@ -1831,6 +1835,7 @@ ZOOMPANEL_ZOOMOUT;Oddálit\nZkratka: - !TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts !TP_EPD_GAMMA;Gamma !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Baseline exposure !TP_ICM_APPLYBASELINEEXPOSUREOFFSET_TOOLTIP;Employ the embedded DCP baseline exposure offset. The setting is only enabled if the selected DCP has any. !TP_ICM_APPLYHUESATMAP;Base table @@ -1838,6 +1843,7 @@ ZOOMPANEL_ZOOMOUT;Oddálit\nZkratka: - !TP_ICM_APPLYLOOKTABLE;Look table !TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only enabled if the selected DCP has one. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_PRSHARPENING_LABEL;Post-Resize Sharpening !TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions. !TP_RAW_HD;Threshold @@ -1848,9 +1854,9 @@ ZOOMPANEL_ZOOMOUT;Oddálit\nZkratka: - !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1885,11 +1891,13 @@ ZOOMPANEL_ZOOMOUT;Oddálit\nZkratka: - !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts. !TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect. @@ -1903,15 +1911,22 @@ ZOOMPANEL_ZOOMOUT;Oddálit\nZkratka: - !TP_WAVELET_LEVDIR_ONE;One level !TP_WAVELET_LEVDIR_SUP;Above the level !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve diff --git a/rtdata/languages/Dansk b/rtdata/languages/Dansk index e536caa6f..670991e01 100644 --- a/rtdata/languages/Dansk +++ b/rtdata/languages/Dansk @@ -858,14 +858,14 @@ TP_WBALANCE_TEMPERATURE;Temperatur !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -914,6 +914,10 @@ TP_WBALANCE_TEMPERATURE;Temperatur !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s !MAIN_BUTTON_FULLSCREEN;Fullscreen !MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4 @@ -1479,6 +1483,7 @@ TP_WBALANCE_TEMPERATURE;Temperatur !TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1 !TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2 !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending !TP_EXPOSURE_TCMODE_STANDARD;Standard !TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard @@ -1540,6 +1545,7 @@ TP_WBALANCE_TEMPERATURE;Temperatur !TP_ICM_INPUTNONE;No profile !TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_ICM_TONECURVE;Tone curve !TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only enabled if the selected DCP has a tone curve. @@ -1705,9 +1711,9 @@ TP_WBALANCE_TEMPERATURE;Temperatur !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1715,14 +1721,14 @@ TP_WBALANCE_TEMPERATURE;Temperatur !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1759,11 +1765,13 @@ TP_WBALANCE_TEMPERATURE;Temperatur !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1786,7 +1794,7 @@ TP_WBALANCE_TEMPERATURE;Temperatur !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1796,32 +1804,39 @@ TP_WBALANCE_TEMPERATURE;Temperatur !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Deutsch b/rtdata/languages/Deutsch index 5cae6ee94..a6e6855d8 100644 --- a/rtdata/languages/Deutsch +++ b/rtdata/languages/Deutsch @@ -1410,14 +1410,14 @@ ZOOMPANEL_ZOOMOUT;Herauszoomen - !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -1466,6 +1466,10 @@ ZOOMPANEL_ZOOMOUT;Herauszoomen - !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4 !MAIN_BUTTON_NAVPREV_TOOLTIP;Navigate to the previous image relative to image opened in the Editor.\nShortcut: Shift-F3\n\nTo navigate to the previous image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F3 !MAIN_BUTTON_NAVSYNC_TOOLTIP;Synchronize the File Browser or Filmstrip with the Editor to reveal the thumbnail of the currently opened image, and clear any active filters.\nShortcut: x\n\nAs above, but without clearing active filters:\nShortcut: y\n(Note that the thumbnail of the opened image will not be shown if filtered out). @@ -1692,6 +1696,7 @@ ZOOMPANEL_ZOOMOUT;Herauszoomen - !TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image. !TP_EPD_GAMMA;Gamma !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points !TP_EXPOS_WHITEPOINT_LABEL;Raw White Points !TP_FILMSIMULATION_LABEL;Film Simulation @@ -1710,6 +1715,7 @@ ZOOMPANEL_ZOOMOUT;Herauszoomen - !TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated !TP_ICM_DCPILLUMINANT_TOOLTIP;Select which embedded DCP illuminant to employ. Default is "interpolated" which is a mix between the two based on white balance. The setting is only enabled if a Dual-Illuminant DCP with interpolation support is selected. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_LABCURVE_CHROMA_TOOLTIP;To apply B&W toning, set Chromaticity to -100. !TP_LABCURVE_CURVEEDITOR_CL;CL @@ -1761,9 +1767,9 @@ ZOOMPANEL_ZOOMOUT;Herauszoomen - !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1771,14 +1777,14 @@ ZOOMPANEL_ZOOMOUT;Herauszoomen - !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1815,11 +1821,13 @@ ZOOMPANEL_ZOOMOUT;Herauszoomen - !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1842,7 +1850,7 @@ ZOOMPANEL_ZOOMOUT;Herauszoomen - !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1852,32 +1860,39 @@ ZOOMPANEL_ZOOMOUT;Herauszoomen - !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/English (UK) b/rtdata/languages/English (UK) index 8d38bc232..7d5dd2323 100644 --- a/rtdata/languages/English (UK) +++ b/rtdata/languages/English (UK) @@ -657,14 +657,14 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -712,6 +712,10 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !HISTORY_NEWSNAPSHOT;Add !HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s !HISTORY_SNAPSHOTS;Snapshots @@ -1439,6 +1443,7 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh !TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1 !TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2 !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending !TP_EXPOSURE_TCMODE_STANDARD;Standard !TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard @@ -1503,6 +1508,7 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh !TP_ICM_OUTPUTPROFILE;Output Profile !TP_ICM_SAVEREFERENCE;Save Reference Image for Profiling !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_ICM_TONECURVE;Tone curve !TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only enabled if the selected DCP has a tone curve. @@ -1694,20 +1700,20 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1744,11 +1750,13 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1771,7 +1779,7 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1781,32 +1789,39 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/English (US) b/rtdata/languages/English (US) index a70c913b4..d0d560dd3 100644 --- a/rtdata/languages/English (US) +++ b/rtdata/languages/English (US) @@ -576,14 +576,14 @@ !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -632,6 +632,10 @@ !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !HISTORY_NEWSNAPSHOT;Add !HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s !HISTORY_SNAPSHOTS;Snapshots @@ -1412,6 +1416,7 @@ !TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1 !TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2 !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending !TP_EXPOSURE_TCMODE_STANDARD;Standard !TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard @@ -1487,6 +1492,7 @@ !TP_ICM_OUTPUTPROFILE;Output Profile !TP_ICM_SAVEREFERENCE;Save Reference Image for Profiling !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_ICM_TONECURVE;Tone curve !TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only enabled if the selected DCP has a tone curve. @@ -1689,9 +1695,9 @@ !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1699,14 +1705,14 @@ !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1743,11 +1749,13 @@ !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1770,7 +1778,7 @@ !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1780,32 +1788,39 @@ !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Espanol b/rtdata/languages/Espanol index 2ef8574be..0977ee200 100644 --- a/rtdata/languages/Espanol +++ b/rtdata/languages/Espanol @@ -1618,14 +1618,14 @@ ZOOMPANEL_ZOOMOUT;Reducir Zoom\nAtajo: - !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -1674,6 +1674,10 @@ ZOOMPANEL_ZOOMOUT;Reducir Zoom\nAtajo: - !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !MAIN_TAB_INSPECT; Inspect !MAIN_TAB_WAVELET;Wavelet !MAIN_TAB_WAVELET_TOOLTIP;Shortcut: Alt-w @@ -1778,6 +1782,7 @@ ZOOMPANEL_ZOOMOUT;Reducir Zoom\nAtajo: - !TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts !TP_EPD_GAMMA;Gamma !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Baseline exposure !TP_ICM_APPLYBASELINEEXPOSUREOFFSET_TOOLTIP;Employ the embedded DCP baseline exposure offset. The setting is only enabled if the selected DCP has any. !TP_ICM_APPLYHUESATMAP;Base table @@ -1785,6 +1790,7 @@ ZOOMPANEL_ZOOMOUT;Reducir Zoom\nAtajo: - !TP_ICM_APPLYLOOKTABLE;Look table !TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only enabled if the selected DCP has one. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_PRSHARPENING_LABEL;Post-Resize Sharpening !TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions. !TP_RAW_HD;Threshold @@ -1806,9 +1812,9 @@ ZOOMPANEL_ZOOMOUT;Reducir Zoom\nAtajo: - !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1816,14 +1822,14 @@ ZOOMPANEL_ZOOMOUT;Reducir Zoom\nAtajo: - !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1860,11 +1866,13 @@ ZOOMPANEL_ZOOMOUT;Reducir Zoom\nAtajo: - !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1887,7 +1895,7 @@ ZOOMPANEL_ZOOMOUT;Reducir Zoom\nAtajo: - !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1897,32 +1905,39 @@ ZOOMPANEL_ZOOMOUT;Reducir Zoom\nAtajo: - !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Euskara b/rtdata/languages/Euskara index 27821a063..dfe147667 100644 --- a/rtdata/languages/Euskara +++ b/rtdata/languages/Euskara @@ -858,14 +858,14 @@ TP_WBALANCE_TEMPERATURE;Tenperatura !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -914,6 +914,10 @@ TP_WBALANCE_TEMPERATURE;Tenperatura !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s !MAIN_BUTTON_FULLSCREEN;Fullscreen !MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4 @@ -1479,6 +1483,7 @@ TP_WBALANCE_TEMPERATURE;Tenperatura !TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1 !TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2 !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending !TP_EXPOSURE_TCMODE_STANDARD;Standard !TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard @@ -1540,6 +1545,7 @@ TP_WBALANCE_TEMPERATURE;Tenperatura !TP_ICM_INPUTNONE;No profile !TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_ICM_TONECURVE;Tone curve !TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only enabled if the selected DCP has a tone curve. @@ -1705,9 +1711,9 @@ TP_WBALANCE_TEMPERATURE;Tenperatura !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1715,14 +1721,14 @@ TP_WBALANCE_TEMPERATURE;Tenperatura !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1759,11 +1765,13 @@ TP_WBALANCE_TEMPERATURE;Tenperatura !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1786,7 +1794,7 @@ TP_WBALANCE_TEMPERATURE;Tenperatura !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1796,32 +1804,39 @@ TP_WBALANCE_TEMPERATURE;Tenperatura !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Francais b/rtdata/languages/Francais index a9b5fd789..93268e24a 100644 --- a/rtdata/languages/Francais +++ b/rtdata/languages/Francais @@ -1543,14 +1543,14 @@ ZOOMPANEL_ZOOMOUT;Zoom Arrière\nRaccourci: - !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -1599,6 +1599,10 @@ ZOOMPANEL_ZOOMOUT;Zoom Arrière\nRaccourci: - !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !MAIN_TAB_WAVELET;Wavelet !MAIN_TAB_WAVELET_TOOLTIP;Shortcut: Alt-w !NAVIGATOR_B;B: @@ -1715,6 +1719,7 @@ ZOOMPANEL_ZOOMOUT;Zoom Arrière\nRaccourci: - !TP_DIRPYRDENOISE_TILELABEL;Tile size=%1, Center: Tx=%2 Ty=%3 !TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts !TP_EPD_GAMMA;Gamma +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Clip control avoids clipped highlights caused by applying the flat field. If there are already clipped highlights before applying the flat field, clip control can lead to color cast. !TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Baseline exposure !TP_ICM_APPLYBASELINEEXPOSUREOFFSET_TOOLTIP;Employ the embedded DCP baseline exposure offset. The setting is only enabled if the selected DCP has any. @@ -1723,6 +1728,7 @@ ZOOMPANEL_ZOOMOUT;Zoom Arrière\nRaccourci: - !TP_ICM_APPLYLOOKTABLE;Look table !TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only enabled if the selected DCP has one. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_PRSHARPENING_LABEL;Post-Resize Sharpening !TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions. !TP_RAW_HD;Threshold @@ -1745,9 +1751,9 @@ ZOOMPANEL_ZOOMOUT;Zoom Arrière\nRaccourci: - !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1755,14 +1761,14 @@ ZOOMPANEL_ZOOMOUT;Zoom Arrière\nRaccourci: - !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1799,11 +1805,13 @@ ZOOMPANEL_ZOOMOUT;Zoom Arrière\nRaccourci: - !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1826,7 +1834,7 @@ ZOOMPANEL_ZOOMOUT;Zoom Arrière\nRaccourci: - !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1836,32 +1844,39 @@ ZOOMPANEL_ZOOMOUT;Zoom Arrière\nRaccourci: - !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Greek b/rtdata/languages/Greek index 84861c3bd..9f0850130 100644 --- a/rtdata/languages/Greek +++ b/rtdata/languages/Greek @@ -857,14 +857,14 @@ TP_WBALANCE_TEMPERATURE;Θερμοκρασία !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -913,6 +913,10 @@ TP_WBALANCE_TEMPERATURE;Θερμοκρασία !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s !MAIN_BUTTON_FULLSCREEN;Fullscreen !MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4 @@ -1478,6 +1482,7 @@ TP_WBALANCE_TEMPERATURE;Θερμοκρασία !TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1 !TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2 !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending !TP_EXPOSURE_TCMODE_STANDARD;Standard !TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard @@ -1539,6 +1544,7 @@ TP_WBALANCE_TEMPERATURE;Θερμοκρασία !TP_ICM_INPUTNONE;No profile !TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_ICM_TONECURVE;Tone curve !TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only enabled if the selected DCP has a tone curve. @@ -1704,9 +1710,9 @@ TP_WBALANCE_TEMPERATURE;Θερμοκρασία !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1714,14 +1720,14 @@ TP_WBALANCE_TEMPERATURE;Θερμοκρασία !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1758,11 +1764,13 @@ TP_WBALANCE_TEMPERATURE;Θερμοκρασία !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1785,7 +1793,7 @@ TP_WBALANCE_TEMPERATURE;Θερμοκρασία !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1795,32 +1803,39 @@ TP_WBALANCE_TEMPERATURE;Θερμοκρασία !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Hebrew b/rtdata/languages/Hebrew index 96506d399..bfecb5a1c 100644 --- a/rtdata/languages/Hebrew +++ b/rtdata/languages/Hebrew @@ -858,14 +858,14 @@ TP_WBALANCE_TEMPERATURE;מידת חום !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -914,6 +914,10 @@ TP_WBALANCE_TEMPERATURE;מידת חום !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s !MAIN_BUTTON_FULLSCREEN;Fullscreen !MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4 @@ -1479,6 +1483,7 @@ TP_WBALANCE_TEMPERATURE;מידת חום !TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1 !TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2 !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending !TP_EXPOSURE_TCMODE_STANDARD;Standard !TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard @@ -1540,6 +1545,7 @@ TP_WBALANCE_TEMPERATURE;מידת חום !TP_ICM_INPUTNONE;No profile !TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_ICM_TONECURVE;Tone curve !TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only enabled if the selected DCP has a tone curve. @@ -1705,9 +1711,9 @@ TP_WBALANCE_TEMPERATURE;מידת חום !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1715,14 +1721,14 @@ TP_WBALANCE_TEMPERATURE;מידת חום !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1759,11 +1765,13 @@ TP_WBALANCE_TEMPERATURE;מידת חום !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1786,7 +1794,7 @@ TP_WBALANCE_TEMPERATURE;מידת חום !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1796,32 +1804,39 @@ TP_WBALANCE_TEMPERATURE;מידת חום !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Italiano b/rtdata/languages/Italiano index b3db7f6b0..c55f2d484 100644 --- a/rtdata/languages/Italiano +++ b/rtdata/languages/Italiano @@ -1482,14 +1482,14 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: - !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -1538,6 +1538,10 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: - !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !MAIN_TAB_INSPECT; Inspect !MAIN_TAB_WAVELET;Wavelet !MAIN_TAB_WAVELET_TOOLTIP;Shortcut: Alt-w @@ -1698,6 +1702,7 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: - !TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts !TP_EPD_GAMMA;Gamma !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points !TP_EXPOS_WHITEPOINT_LABEL;Raw White Points !TP_FILMSIMULATION_LABEL;Film Simulation @@ -1712,6 +1717,7 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: - !TP_ICM_APPLYLOOKTABLE;Look table !TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only enabled if the selected DCP has one. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_PREPROCESS_DEADPIXFILT;Dead pixel filter !TP_PREPROCESS_DEADPIXFILT_TOOLTIP;Tries to suppress dead pixels. !TP_PREPROCESS_HOTPIXFILT;Hot pixel filter @@ -1748,9 +1754,9 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: - !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1758,14 +1764,14 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: - !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1802,11 +1808,13 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: - !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1829,7 +1837,7 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: - !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1839,32 +1847,39 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: - !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Japanese b/rtdata/languages/Japanese index 1ad7999db..c13d800ae 100644 --- a/rtdata/languages/Japanese +++ b/rtdata/languages/Japanese @@ -1917,3 +1917,22 @@ ZOOMPANEL_ZOOMFITSCREEN;画像全体を画面に合わせる\nショートカッ ZOOMPANEL_ZOOMIN;ズームイン\nショートカット: + ZOOMPANEL_ZOOMOUT;ズームアウト\nショートカット: - +!!!!!!!!!!!!!!!!!!!!!!!!! +! Untranslated keys follow; remove the ! prefix after an entry is translated. +!!!!!!!!!!!!!!!!!!!!!!!!! + +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. +!TP_WAVELET_EDGEAMPLI;Base amplification +!TP_WAVELET_EDGESENSI;Edge sensitivity +!TP_WAVELET_LEVTHRE;Level 4 +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. diff --git a/rtdata/languages/Latvian b/rtdata/languages/Latvian index e8b1165da..22fa7b180 100644 --- a/rtdata/languages/Latvian +++ b/rtdata/languages/Latvian @@ -858,14 +858,14 @@ TP_WBALANCE_TEMPERATURE;Temperatūra !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -914,6 +914,10 @@ TP_WBALANCE_TEMPERATURE;Temperatūra !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s !MAIN_BUTTON_FULLSCREEN;Fullscreen !MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4 @@ -1479,6 +1483,7 @@ TP_WBALANCE_TEMPERATURE;Temperatūra !TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1 !TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2 !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending !TP_EXPOSURE_TCMODE_STANDARD;Standard !TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard @@ -1540,6 +1545,7 @@ TP_WBALANCE_TEMPERATURE;Temperatūra !TP_ICM_INPUTNONE;No profile !TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_ICM_TONECURVE;Tone curve !TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only enabled if the selected DCP has a tone curve. @@ -1705,9 +1711,9 @@ TP_WBALANCE_TEMPERATURE;Temperatūra !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1715,14 +1721,14 @@ TP_WBALANCE_TEMPERATURE;Temperatūra !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1759,11 +1765,13 @@ TP_WBALANCE_TEMPERATURE;Temperatūra !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1786,7 +1794,7 @@ TP_WBALANCE_TEMPERATURE;Temperatūra !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1796,32 +1804,39 @@ TP_WBALANCE_TEMPERATURE;Temperatūra !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Magyar b/rtdata/languages/Magyar index 120e2be0c..d5fd18592 100644 --- a/rtdata/languages/Magyar +++ b/rtdata/languages/Magyar @@ -1142,14 +1142,14 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés - !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -1198,6 +1198,10 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés - !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s !MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4 !MAIN_BUTTON_NAVPREV_TOOLTIP;Navigate to the previous image relative to image opened in the Editor.\nShortcut: Shift-F3\n\nTo navigate to the previous image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F3 @@ -1603,6 +1607,7 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés - !TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1 !TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2 !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending !TP_EXPOSURE_TCMODE_STANDARD;Standard !TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard @@ -1637,6 +1642,7 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés - !TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated !TP_ICM_DCPILLUMINANT_TOOLTIP;Select which embedded DCP illuminant to employ. Default is "interpolated" which is a mix between the two based on white balance. The setting is only enabled if a Dual-Illuminant DCP with interpolation support is selected. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_ICM_TONECURVE;Tone curve !TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only enabled if the selected DCP has a tone curve. @@ -1742,9 +1748,9 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés - !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1752,14 +1758,14 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés - !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1796,11 +1802,13 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés - !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1823,7 +1831,7 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés - !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1833,32 +1841,39 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés - !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Nederlands b/rtdata/languages/Nederlands index 0bfdece8f..a6cb29af1 100644 --- a/rtdata/languages/Nederlands +++ b/rtdata/languages/Nederlands @@ -1732,14 +1732,14 @@ ZOOMPANEL_ZOOMOUT;Zoom uit\nSneltoets: - !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -1788,6 +1788,10 @@ ZOOMPANEL_ZOOMOUT;Zoom uit\nSneltoets: - !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !MAIN_TAB_WAVELET;Wavelet !MAIN_TAB_WAVELET_TOOLTIP;Shortcut: Alt-w !PARTIALPASTE_WAVELETGROUP;Wavelet Levels @@ -1812,6 +1816,7 @@ ZOOMPANEL_ZOOMOUT;Zoom uit\nSneltoets: - !TP_DIRPYREQUALIZER_HUESKIN_TOOLTIP;This pyramid is for the upper part, so far as the algorithm at its maximum efficiency.\nTo the lower part, the transition zones.\nIf you need to move the area significantly to the left or right - or if there are artifacts: the white balance is incorrect\nYou can slightly reduce the zone to prevent the rest of the image is affected. !TP_EPD_GAMMA;Gamma !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Baseline exposure !TP_ICM_APPLYBASELINEEXPOSUREOFFSET_TOOLTIP;Employ the embedded DCP baseline exposure offset. The setting is only enabled if the selected DCP has any. !TP_ICM_APPLYHUESATMAP;Base table @@ -1819,6 +1824,7 @@ ZOOMPANEL_ZOOMOUT;Zoom uit\nSneltoets: - !TP_ICM_APPLYLOOKTABLE;Look table !TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only enabled if the selected DCP has one. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_PRSHARPENING_LABEL;Post-Resize Sharpening !TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions. !TP_RAW_HD;Threshold @@ -1830,9 +1836,9 @@ ZOOMPANEL_ZOOMOUT;Zoom uit\nSneltoets: - !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1867,11 +1873,13 @@ ZOOMPANEL_ZOOMOUT;Zoom uit\nSneltoets: - !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts. !TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect. @@ -1885,15 +1893,22 @@ ZOOMPANEL_ZOOMOUT;Zoom uit\nSneltoets: - !TP_WAVELET_LEVDIR_ONE;One level !TP_WAVELET_LEVDIR_SUP;Above the level !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve diff --git a/rtdata/languages/Norsk BM b/rtdata/languages/Norsk BM index 2cddeac91..151f9f19f 100644 --- a/rtdata/languages/Norsk BM +++ b/rtdata/languages/Norsk BM @@ -857,14 +857,14 @@ TP_WBALANCE_TEMPERATURE;Temperatur !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -913,6 +913,10 @@ TP_WBALANCE_TEMPERATURE;Temperatur !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s !MAIN_BUTTON_FULLSCREEN;Fullscreen !MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4 @@ -1478,6 +1482,7 @@ TP_WBALANCE_TEMPERATURE;Temperatur !TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1 !TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2 !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending !TP_EXPOSURE_TCMODE_STANDARD;Standard !TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard @@ -1539,6 +1544,7 @@ TP_WBALANCE_TEMPERATURE;Temperatur !TP_ICM_INPUTNONE;No profile !TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_ICM_TONECURVE;Tone curve !TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only enabled if the selected DCP has a tone curve. @@ -1704,9 +1710,9 @@ TP_WBALANCE_TEMPERATURE;Temperatur !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1714,14 +1720,14 @@ TP_WBALANCE_TEMPERATURE;Temperatur !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1758,11 +1764,13 @@ TP_WBALANCE_TEMPERATURE;Temperatur !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1785,7 +1793,7 @@ TP_WBALANCE_TEMPERATURE;Temperatur !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1795,32 +1803,39 @@ TP_WBALANCE_TEMPERATURE;Temperatur !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Polish b/rtdata/languages/Polish index beaf8baf0..2895e9a42 100644 --- a/rtdata/languages/Polish +++ b/rtdata/languages/Polish @@ -1574,14 +1574,14 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: - !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -1630,6 +1630,10 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: - !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !MAIN_TAB_INSPECT; Inspect !MAIN_TAB_WAVELET;Wavelet !MAIN_TAB_WAVELET_TOOLTIP;Shortcut: Alt-w @@ -1724,6 +1728,7 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: - !TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts !TP_EPD_GAMMA;Gamma !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Baseline exposure !TP_ICM_APPLYBASELINEEXPOSUREOFFSET_TOOLTIP;Employ the embedded DCP baseline exposure offset. The setting is only enabled if the selected DCP has any. !TP_ICM_APPLYHUESATMAP;Base table @@ -1731,6 +1736,7 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: - !TP_ICM_APPLYLOOKTABLE;Look table !TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only enabled if the selected DCP has one. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_PRSHARPENING_LABEL;Post-Resize Sharpening !TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions. !TP_RAW_HD;Threshold @@ -1752,9 +1758,9 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: - !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1762,14 +1768,14 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: - !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1806,11 +1812,13 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: - !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1833,7 +1841,7 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: - !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1843,32 +1851,39 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: - !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Polish (Latin Characters) b/rtdata/languages/Polish (Latin Characters) index 36ef4bc69..4566d3c55 100644 --- a/rtdata/languages/Polish (Latin Characters) +++ b/rtdata/languages/Polish (Latin Characters) @@ -1574,14 +1574,14 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrot: - !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -1630,6 +1630,10 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrot: - !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !MAIN_TAB_INSPECT; Inspect !MAIN_TAB_WAVELET;Wavelet !MAIN_TAB_WAVELET_TOOLTIP;Shortcut: Alt-w @@ -1724,6 +1728,7 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrot: - !TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts !TP_EPD_GAMMA;Gamma !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Baseline exposure !TP_ICM_APPLYBASELINEEXPOSUREOFFSET_TOOLTIP;Employ the embedded DCP baseline exposure offset. The setting is only enabled if the selected DCP has any. !TP_ICM_APPLYHUESATMAP;Base table @@ -1731,6 +1736,7 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrot: - !TP_ICM_APPLYLOOKTABLE;Look table !TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only enabled if the selected DCP has one. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_PRSHARPENING_LABEL;Post-Resize Sharpening !TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions. !TP_RAW_HD;Threshold @@ -1752,9 +1758,9 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrot: - !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1762,14 +1768,14 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrot: - !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1806,11 +1812,13 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrot: - !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1833,7 +1841,7 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrot: - !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1843,32 +1851,39 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrot: - !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Portugues (Brasil) b/rtdata/languages/Portugues (Brasil) index 37d1a1149..03d7a1242 100644 --- a/rtdata/languages/Portugues (Brasil) +++ b/rtdata/languages/Portugues (Brasil) @@ -858,14 +858,14 @@ TP_WBALANCE_TEMPERATURE;Temperatura !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -914,6 +914,10 @@ TP_WBALANCE_TEMPERATURE;Temperatura !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s !MAIN_BUTTON_FULLSCREEN;Fullscreen !MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4 @@ -1479,6 +1483,7 @@ TP_WBALANCE_TEMPERATURE;Temperatura !TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1 !TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2 !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending !TP_EXPOSURE_TCMODE_STANDARD;Standard !TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard @@ -1540,6 +1545,7 @@ TP_WBALANCE_TEMPERATURE;Temperatura !TP_ICM_INPUTNONE;No profile !TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_ICM_TONECURVE;Tone curve !TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only enabled if the selected DCP has a tone curve. @@ -1705,9 +1711,9 @@ TP_WBALANCE_TEMPERATURE;Temperatura !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1715,14 +1721,14 @@ TP_WBALANCE_TEMPERATURE;Temperatura !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1759,11 +1765,13 @@ TP_WBALANCE_TEMPERATURE;Temperatura !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1786,7 +1794,7 @@ TP_WBALANCE_TEMPERATURE;Temperatura !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1796,32 +1804,39 @@ TP_WBALANCE_TEMPERATURE;Temperatura !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Russian b/rtdata/languages/Russian index 118a42c34..0e7fba860 100644 --- a/rtdata/languages/Russian +++ b/rtdata/languages/Russian @@ -1425,14 +1425,14 @@ ZOOMPANEL_ZOOMOUT;Удалить - !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -1481,6 +1481,10 @@ ZOOMPANEL_ZOOMOUT;Удалить - !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !MAIN_TAB_INSPECT; Inspect !MAIN_TAB_WAVELET;Wavelet !MAIN_TAB_WAVELET_TOOLTIP;Shortcut: Alt-w @@ -1699,6 +1703,7 @@ ZOOMPANEL_ZOOMOUT;Удалить - !TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image. !TP_EPD_GAMMA;Gamma !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points !TP_EXPOS_WHITEPOINT_LABEL;Raw White Points !TP_FILMSIMULATION_LABEL;Film Simulation @@ -1714,6 +1719,7 @@ ZOOMPANEL_ZOOMOUT;Удалить - !TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only enabled if the selected DCP has one. !TP_ICM_DCPILLUMINANT_TOOLTIP;Select which embedded DCP illuminant to employ. Default is "interpolated" which is a mix between the two based on white balance. The setting is only enabled if a Dual-Illuminant DCP with interpolation support is selected. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_PREPROCESS_DEADPIXFILT;Dead pixel filter !TP_PREPROCESS_DEADPIXFILT_TOOLTIP;Tries to suppress dead pixels. !TP_PREPROCESS_HOTPIXFILT;Hot pixel filter @@ -1750,9 +1756,9 @@ ZOOMPANEL_ZOOMOUT;Удалить - !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1760,14 +1766,14 @@ ZOOMPANEL_ZOOMOUT;Удалить - !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1804,11 +1810,13 @@ ZOOMPANEL_ZOOMOUT;Удалить - !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1831,7 +1839,7 @@ ZOOMPANEL_ZOOMOUT;Удалить - !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1841,32 +1849,39 @@ ZOOMPANEL_ZOOMOUT;Удалить - !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Serbian (Cyrilic Characters) b/rtdata/languages/Serbian (Cyrilic Characters) index 07be3b876..3d9932655 100644 --- a/rtdata/languages/Serbian (Cyrilic Characters) +++ b/rtdata/languages/Serbian (Cyrilic Characters) @@ -1063,14 +1063,14 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике - !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -1119,6 +1119,10 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике - !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s !MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4 !MAIN_BUTTON_NAVPREV_TOOLTIP;Navigate to the previous image relative to image opened in the Editor.\nShortcut: Shift-F3\n\nTo navigate to the previous image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F3 @@ -1551,6 +1555,7 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике - !TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1 !TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2 !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending !TP_EXPOSURE_TCMODE_STANDARD;Standard !TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard @@ -1592,6 +1597,7 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике - !TP_ICM_INPUTEMBEDDED_TOOLTIP;Use color profile embedded in non-raw files. !TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_ICM_TONECURVE;Tone curve !TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only enabled if the selected DCP has a tone curve. @@ -1711,9 +1717,9 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике - !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1721,14 +1727,14 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике - !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1765,11 +1771,13 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике - !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1792,7 +1800,7 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике - !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1802,32 +1810,39 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике - !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Serbian (Latin Characters) b/rtdata/languages/Serbian (Latin Characters) index 0d455061d..300d2f8be 100644 --- a/rtdata/languages/Serbian (Latin Characters) +++ b/rtdata/languages/Serbian (Latin Characters) @@ -1063,14 +1063,14 @@ ZOOMPANEL_ZOOMOUT;Umanjuje prikaz slike - !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -1119,6 +1119,10 @@ ZOOMPANEL_ZOOMOUT;Umanjuje prikaz slike - !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s !MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4 !MAIN_BUTTON_NAVPREV_TOOLTIP;Navigate to the previous image relative to image opened in the Editor.\nShortcut: Shift-F3\n\nTo navigate to the previous image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F3 @@ -1551,6 +1555,7 @@ ZOOMPANEL_ZOOMOUT;Umanjuje prikaz slike - !TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1 !TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2 !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending !TP_EXPOSURE_TCMODE_STANDARD;Standard !TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard @@ -1592,6 +1597,7 @@ ZOOMPANEL_ZOOMOUT;Umanjuje prikaz slike - !TP_ICM_INPUTEMBEDDED_TOOLTIP;Use color profile embedded in non-raw files. !TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_ICM_TONECURVE;Tone curve !TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only enabled if the selected DCP has a tone curve. @@ -1711,9 +1717,9 @@ ZOOMPANEL_ZOOMOUT;Umanjuje prikaz slike - !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1721,14 +1727,14 @@ ZOOMPANEL_ZOOMOUT;Umanjuje prikaz slike - !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1765,11 +1771,13 @@ ZOOMPANEL_ZOOMOUT;Umanjuje prikaz slike - !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1792,7 +1800,7 @@ ZOOMPANEL_ZOOMOUT;Umanjuje prikaz slike - !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1802,32 +1810,39 @@ ZOOMPANEL_ZOOMOUT;Umanjuje prikaz slike - !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Slovak b/rtdata/languages/Slovak index fe9af3946..b314fbf25 100644 --- a/rtdata/languages/Slovak +++ b/rtdata/languages/Slovak @@ -921,14 +921,14 @@ ZOOMPANEL_ZOOMOUT;Oddialiť - !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -977,6 +977,10 @@ ZOOMPANEL_ZOOMOUT;Oddialiť - !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s !MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4 !MAIN_BUTTON_NAVPREV_TOOLTIP;Navigate to the previous image relative to image opened in the Editor.\nShortcut: Shift-F3\n\nTo navigate to the previous image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F3 @@ -1506,6 +1510,7 @@ ZOOMPANEL_ZOOMOUT;Oddialiť - !TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1 !TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2 !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending !TP_EXPOSURE_TCMODE_STANDARD;Standard !TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard @@ -1567,6 +1572,7 @@ ZOOMPANEL_ZOOMOUT;Oddialiť - !TP_ICM_INPUTNONE;No profile !TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_ICM_TONECURVE;Tone curve !TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only enabled if the selected DCP has a tone curve. @@ -1712,9 +1718,9 @@ ZOOMPANEL_ZOOMOUT;Oddialiť - !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1722,14 +1728,14 @@ ZOOMPANEL_ZOOMOUT;Oddialiť - !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1766,11 +1772,13 @@ ZOOMPANEL_ZOOMOUT;Oddialiť - !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1793,7 +1801,7 @@ ZOOMPANEL_ZOOMOUT;Oddialiť - !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1803,32 +1811,39 @@ ZOOMPANEL_ZOOMOUT;Oddialiť - !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Suomi b/rtdata/languages/Suomi index caabb6980..df2f109f4 100644 --- a/rtdata/languages/Suomi +++ b/rtdata/languages/Suomi @@ -859,14 +859,14 @@ TP_WBALANCE_TEMPERATURE;Lämpötila [K] !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -915,6 +915,10 @@ TP_WBALANCE_TEMPERATURE;Lämpötila [K] !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s !MAIN_BUTTON_FULLSCREEN;Fullscreen !MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4 @@ -1479,6 +1483,7 @@ TP_WBALANCE_TEMPERATURE;Lämpötila [K] !TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1 !TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2 !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending !TP_EXPOSURE_TCMODE_STANDARD;Standard !TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard @@ -1540,6 +1545,7 @@ TP_WBALANCE_TEMPERATURE;Lämpötila [K] !TP_ICM_INPUTNONE;No profile !TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_ICM_TONECURVE;Tone curve !TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only enabled if the selected DCP has a tone curve. @@ -1705,9 +1711,9 @@ TP_WBALANCE_TEMPERATURE;Lämpötila [K] !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1715,14 +1721,14 @@ TP_WBALANCE_TEMPERATURE;Lämpötila [K] !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1759,11 +1765,13 @@ TP_WBALANCE_TEMPERATURE;Lämpötila [K] !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1786,7 +1794,7 @@ TP_WBALANCE_TEMPERATURE;Lämpötila [K] !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1796,32 +1804,39 @@ TP_WBALANCE_TEMPERATURE;Lämpötila [K] !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/Turkish b/rtdata/languages/Turkish index 4d5c1efed..93a9c8db0 100644 --- a/rtdata/languages/Turkish +++ b/rtdata/languages/Turkish @@ -858,14 +858,14 @@ TP_WBALANCE_TEMPERATURE;Isı !HISTORY_MSG_344;W - Meth chroma sl/cur !HISTORY_MSG_345;W - ES - Local contrast !HISTORY_MSG_346;W - ES - Local contrast method -!HISTORY_MSG_347;W - Denoise - Level 0 -!HISTORY_MSG_348;W - Denoise - Level 1 -!HISTORY_MSG_349;W - Denoise - Level 2 +!HISTORY_MSG_347;W - Denoise - Level 1 +!HISTORY_MSG_348;W - Denoise - Level 2 +!HISTORY_MSG_349;W - Denoise - Level 3 !HISTORY_MSG_350;W - ES - Edge detection !HISTORY_MSG_351;W - Residual - HH curve !HISTORY_MSG_352;W - Background !HISTORY_MSG_353;W - ES - Gradient sensitivity -!HISTORY_MSG_354;W - ES - Enhance +!HISTORY_MSG_354;W - ES - Enhanced !HISTORY_MSG_355;W - ES - Threshold low !HISTORY_MSG_356;W - ES - Threshold high !HISTORY_MSG_357;W - Denoise - Link with ES @@ -914,6 +914,10 @@ TP_WBALANCE_TEMPERATURE;Isı !HISTORY_MSG_400;W - Final sub-tool !HISTORY_MSG_401;W - Toning sub-tool !HISTORY_MSG_402;W - Denoise sub-tool +!HISTORY_MSG_403;W - ES - Edge sensitivity +!HISTORY_MSG_404;W - ES - Base amplification +!HISTORY_MSG_405;W - Denoise - Level 4 +!HISTORY_MSG_406;W - ES - Neighboring pixels !HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s !MAIN_BUTTON_FULLSCREEN;Fullscreen !MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4 @@ -1478,6 +1482,7 @@ TP_WBALANCE_TEMPERATURE;Isı !TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1 !TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2 !TP_EXPOSURE_TCMODE_LUMINANCE;Luminance +!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual !TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending !TP_EXPOSURE_TCMODE_STANDARD;Standard !TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard @@ -1539,6 +1544,7 @@ TP_WBALANCE_TEMPERATURE;Isı !TP_ICM_INPUTNONE;No profile !TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases. !TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance +!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles. !TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile. !TP_ICM_TONECURVE;Tone curve !TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only enabled if the selected DCP has a tone curve. @@ -1704,9 +1710,9 @@ TP_WBALANCE_TEMPERATURE;Isı !TP_WAVELET_BACKGROUND;Background !TP_WAVELET_BACUR;Curve !TP_WAVELET_BALANCE;Contrast balance d/v-h -!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chromaticity or residual tone mapping are activated, the effect due to balance is amplified. +!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified. !TP_WAVELET_BALCHRO;Chroma balance -!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chromaticity balance. +!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance. !TP_WAVELET_BANONE;None !TP_WAVELET_BASLI;Slider !TP_WAVELET_BATYPE;Contrast balance method @@ -1714,14 +1720,14 @@ TP_WBALANCE_TEMPERATURE;Isı !TP_WAVELET_CBTYPE;Toning and Color Balance !TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted !TP_WAVELET_CCURVE;Local contrast -!TP_WAVELET_CH1;Whole chromaticity range +!TP_WAVELET_CH1;Whole chroma range !TP_WAVELET_CH2;Saturated/pastel !TP_WAVELET_CH3;Link contrast levels !TP_WAVELET_CHCU;Curve !TP_WAVELET_CHRO;Saturated/pastel threshold !TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored. !TP_WAVELET_CHR;Chroma-contrast link strength -!TP_WAVELET_CHR_TOOLTIP;Adjusts chromaticity as a function of "contrast levels" and "chroma-contrast link strength" +!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength" !TP_WAVELET_CHSL;Sliders !TP_WAVELET_CHTYPE;Chrominance method !TP_WAVELET_COLORT;Opacity Red-Green @@ -1758,11 +1764,13 @@ TP_WBALANCE_TEMPERATURE;Isı !TP_WAVELET_EDCU;Curve !TP_WAVELET_EDGCONT;Local contrast !TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +!TP_WAVELET_EDGEAMPLI;Base amplification !TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) !TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) !TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. !TP_WAVELET_EDGEDETECT;Gradient sensitivity !TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +!TP_WAVELET_EDGESENSI;Edge sensitivity !TP_WAVELET_EDGE;Edge Sharpness !TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. !TP_WAVELET_EDGTHRESH;Detail @@ -1785,7 +1793,7 @@ TP_WBALANCE_TEMPERATURE;Isı !TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels. !TP_WAVELET_LABEL;Wavelet Levels !TP_WAVELET_LARGEST;Coarsest -!TP_WAVELET_LEVCH;Chromaticity +!TP_WAVELET_LEVCH;Chroma !TP_WAVELET_LEVDIR_ALL;All levels in all directions !TP_WAVELET_LEVDIR_INF;Below or equal the level !TP_WAVELET_LEVDIR_ONE;One level @@ -1795,32 +1803,39 @@ TP_WBALANCE_TEMPERATURE;Isı !TP_WAVELET_LEVF;Contrast !TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 !TP_WAVELET_LEVONE;Level 2 +!TP_WAVELET_LEVTHRE;Level 4 !TP_WAVELET_LEVTWO;Level 3 !TP_WAVELET_LEVZERO;Level 1 !TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength -!TP_WAVELET_LIPST;Enhanced algorithm -!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses Lipschitz regularity to increase edge detection quality at a cost of increased processing time and memory requirements. +!TP_WAVELET_LIPST;Enhanced algoritm +!TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_LOWLIGHT;Shadow luminance range !TP_WAVELET_MEDGREINF;First level !TP_WAVELET_MEDILEV;Edge detection +!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine. !TP_WAVELET_MEDI;Reduce artifacts in blue sky !TP_WAVELET_NEUTRAL;Neutral !TP_WAVELET_NOISE;Denoise and Refine !TP_WAVELET_NOIS;Denoise +!TP_WAVELET_NPHIGH;High +!TP_WAVELET_NPLOW;Low +!TP_WAVELET_NPNONE;None +!TP_WAVELET_NPTYPE;Neighboring pixels +!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. !TP_WAVELET_OPACITYWL;Final local contrast !TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right. !TP_WAVELET_OPACITYW;Contrast balance d/v-h curve !TP_WAVELET_OPACITY;Opacity Blue-Yellow -!TP_WAVELET_PASTEL;Pastel chromaticity +!TP_WAVELET_PASTEL;Pastel chroma !TP_WAVELET_PROC;Process !TP_WAVELET_RE1;Reinforced !TP_WAVELET_RE2;Unchanged !TP_WAVELET_RE3;Reduced -!TP_WAVELET_RESCHRO;Chromaticity +!TP_WAVELET_RESCHRO;Chroma !TP_WAVELET_RESCONH;Highlights !TP_WAVELET_RESCON;Shadows !TP_WAVELET_RESID;Residual Image -!TP_WAVELET_SAT;Saturated chromaticity +!TP_WAVELET_SAT;Saturated chroma !TP_WAVELET_SETTINGS;Wavelet Settings !TP_WAVELET_SKIN;Skin targetting/protection !TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected. diff --git a/rtdata/languages/default b/rtdata/languages/default index 3ac2fe9ac..ad2c8ae28 100644 --- a/rtdata/languages/default +++ b/rtdata/languages/default @@ -1747,17 +1747,17 @@ TP_WAVELET_DONE;Vertical TP_WAVELET_DTHR;Diagonal TP_WAVELET_DTWO;Horizontal TP_WAVELET_EDCU;Curve -TP_WAVELET_EDGEAMPLI;Base amplification TP_WAVELET_EDGCONT;Local contrast TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, Top-Left, Top-Right, Bottom-right represent respectively local contast for low values, mean, mean+stdev, maxima +TP_WAVELET_EDGEAMPLI;Base amplification TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection) TP_WAVELET_EDGEDETECTTHR;Threshold low (noise) TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky. TP_WAVELET_EDGEDETECT;Gradient sensitivity TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise. +TP_WAVELET_EDGESENSI;Edge sensitivity TP_WAVELET_EDGE;Edge Sharpness TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged. -TP_WAVELET_EDGESENSI;Edge sensitivity TP_WAVELET_EDGTHRESH;Detail TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centred on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts. TP_WAVELET_EDRAD;Radius @@ -1788,9 +1788,9 @@ TP_WAVELET_LEVELS_TOOLTIP;Choose the number of detail levels the image is to be TP_WAVELET_LEVF;Contrast TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1 TP_WAVELET_LEVONE;Level 2 +TP_WAVELET_LEVTHRE;Level 4 TP_WAVELET_LEVTWO;Level 3 TP_WAVELET_LEVZERO;Level 1 -TP_WAVELET_LEVTHRE;Level 4 TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength TP_WAVELET_LIPST;Enhanced algoritm TP_WAVELET_LIPST_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. @@ -1802,9 +1802,9 @@ TP_WAVELET_MEDI;Reduce artifacts in blue sky TP_WAVELET_NEUTRAL;Neutral TP_WAVELET_NOISE;Denoise and Refine TP_WAVELET_NOIS;Denoise -TP_WAVELET_NPNONE;None -TP_WAVELET_NPLOW;Low TP_WAVELET_NPHIGH;High +TP_WAVELET_NPLOW;Low +TP_WAVELET_NPNONE;None TP_WAVELET_NPTYPE;Neighboring pixels TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced. TP_WAVELET_OPACITYWL;Final local contrast