Local Adjustments - Cam16 - lacam16n2 (new) (#7010)

* Restore settings and options

* Clean code and windows.yml

* Gui improvment

* Fixed wrong value maxicam

* Change GUI TRC and Log encoding and sigmoid

* Clean code locallabtools2

* Fomat locallabtools2

* New calcualtion gray when using Q

* Improve sigmoid Q with meanQ

* Change labels and tooltip

* Change DR with log

* Change location GUI TRC

* Change GUI sigmoid hide - show

* Fixed bug with trc

* Added whites to TRC & whites

* Small modification whites - comment code

* Change GUI and selection for sigmoid and log encoding Q

* Change yml worksflow

* Added cat to workingtrc rtthumbnail

* Delete entries in defualt languages

* Blacks and whites distribution

* Change tooltips

* Fixed some issues

* Change GUI hide to set_sensitive

* first step white and black log encoding

* GUI Labels - tooltips

* Compress brightness log encoding

* Change compression threshold

* Clean procparams

* Improve GUI and threshold compression

* Improvment GUI and tooltips

* First step primaries cam16

* Primaries loc step 2

* Primaries loc step 3

* jdcmax primaries - format iplab2rgb

* Improve GUI

* Beta RGB primaries and message

* Change tooltips

* Change order prim

* CIExy diagram step 1

* CIExy step 2

* CIExy step 2

* CIExy diagram step 4

* CIExy diagram step 5

* Change improccordinator and locallabtool2s listener

* Forgoten delete in improccordinator

* Disable setListener

* Improve GUI and behavior TRC and Primaries

* TRC primaries - illuminant step 1

* TRC primaries - illuminant step 2

* TRC primaries - illuminant step 3

* TRC primaries - illuminant step 4

* Gamut control - remove old listener and added listener locallabcieLC

* publish pre dev labels windows appimage

* publish pre dev labels windows appimage []

* Move log encoding cie - step 1

* Step 2

* Move Log encoding CIE and improve GUI step 3

* Pre Ciecam midtones step 1

* Mid tones step 2 and tooltips

* Forgoten label and tooltips

* Improve tooltips - and change yml files

* Include repository in appimage and windows.yml - change labels

* Forgotten surroundcie in procparams.cc

* Improve GUI with expander - clean code

* Change tooltip

* Clean locallabtools2 - improve Jpro

* Bypass Ciecam step 1

* step 2

* Step 3

* Change settings - improve GUI

* Clean code

* Improve sigmoid cam16

* Improve sigmoid cam16

* Added illuminant E to illmethod

* Change iccmatrices

* Working profile JDCmax stdA and Abstract Profile

* Pre-ciecam JDCmax stdA

* Abstract profile - cat method step 1

* Step 3

* Step 4 and various changes

* Enable default gamutcontrol - improve GUI

* Refine color pre-ciecam

* Step 2

* step 3

* Step - 4

* Refine colors Abstract profiles

* Expander true Abstract Profile

* Clean and comment code

* Tooltip pre-ciecam

* Change tooltips

* Improve GUI free primaries

* Labgrid dominant color

* Shift dominant color step 1

* Shift xy dominant color

* History msg shift

* Fixed various bad behavior - change scalrefi

* Improve behavior DR vs deltaE - log encoding and pre-ciecam

* Limited reduce deltaE to 1 - comment code

* Improve behavior TIF/JPG

* Forgotten code

* Various small changes to refinement color pre-ciecam

* Foramt iplab2rgb and simpleprocees - small change meanx meany

* Bad behavior with simpleprocess abstract profile and pre-ciecam

* Re-enable code for simpleprocess

* Iprove iplab2rgb

* Improve GUI if selection Jz

* provis with precision

* Chnage GUI log encoding basic - improve shiftxl shiftyl pre-ciecam

* Improve GUI with expanders

* Change location pre-ciecam expander

* Change label tooltip pre-ciecam

* Improve white distribution and equalizer

* Bad behavior Source data adjustments

* Comment code

* Improve Dynamic Range Compression - for some images with very high DR

* Clean code

* Improve TM fattal with saturation control in LA

* saturation control fattal LA

* RE-order paramsedit

* Change local contrast in LA - log encoding and Cam16

* LA settings avoidcolorshift XYZabsolute

* Change GUI precision blackEv WhiteEv BlackEvjz WhiteEvjz

* Check button smoothcie - smooth highlights

* Change order midtones - log encoding - other method smooth

* Change maximum gamma in TRC cam16

* Change maximum slope in TRC cam16

* refine smooth highlights

* Small improvment - comment code

* Bad behavior - black screen - in Cam16

* setLogscale for slopjcie

* Change source data GUI - PQ and other DR functions

* PQ mode advanced - adjustments and tooltip

* Comment and clean code

* Simplified GUI in Basic mode - Source Data Adjustments

* Added primaries to source date adjustements - fix basic problem

* GUI graduaded filter cie cam16

* Graduated filter - LA Color appearance

* More illuminant cam16 - D120 - Tungsten 2000K - Tungsten 1500K

* Abstract profile ICM - shift x - shift y

* Frame color dominant Abstract profile

* Frame color dominant Abstract profile

* Illuminant E - abstract profile

* Abstact profile - midtones

* Abstrcat profile - smooth highlights checkbutton

* Abstract Profile - Smooth highligts rtengine

* Bad behavior LA gamut - re-enabled Munsell in settings

* adapts Abstract profile and auto-match tone curve

* Change chromaticity curve c(h) - ppversion 351 and procparams

* icmpanel fixed bad wmidtcie

* Change in procparams assignfromkeyfile color Management

* Remove message in console

* Missing code procparams.cc wcat

* Clean message in console

* Disable ppversion 351 - surround extremely dark

* Choice surround scene Disable ciecam

* Improve GUI for surround Disable Ciecam

* Small change gamutcontrol - message g0..g5 verbose

* Remove gautcontrol on limits

* Strength log encoding - Source data adjustments

* Fixed genral bug in lacam16n - bad behavior color

* Checkbutton saturation control - Cam16 log encoding

* Change default saturation controle log encoding - false

* GUI LA Log encoding - Strength - saturation control - part 1

* Checkbox saturation control LA Log encoding

* Change repartition GUI brightnees - hue - chroma

* Hide primaries and illuminant in standard mode

* Merge with dev 2

* reduces sigmoid Q contrast

* Provisory disable Sigmoid Q

* Re-enable sigmoid function complexity mode

* Re-enable log encoding Q - with Ciecam

* GUI improvments - small code improvments

* Change tooltip

* Simplify GUI mode Basic - Standard - added tooltip

* Change tooltip - LA settings - Avoid color shift

* hope to fix the bug between Jz and Cam16

* Another change for Jz - format astyle locallabtool2.cc

* Clean code GUI - remove Zcam

* Change label in Recovery based on luminance mask

* Reduces minimum spot size from 2 to 1.5

* Improve behavior GUI with Jzczhz

* Clean code iplocallab.cc

* Small improvement ciecam02.cc

* Fixed bad behvior GUI and code between Cam16 and Jzczhz

* Improve Jz and surround effects

* Improve Jz and Local contrast Cam16 & Jz taking account surround

* Disable local contrast if cam16 and not ciecam surround

* Restore epsil 0.001 loccont

* Improve local contrast when surround low and Jz

* Clean code locallabtool2 - weakened a little Local Contrast in connection with surround

* Remove Laplacian threshold in Cam16 and JzCzHz mask

* Simplify Mask for JzCzHz

* Enable choice complexity mask in mode advanced

* Solved bad behavior GUI masks

* Optimize GUI mask Jz and cam16

* Change 3 icon .png without png

* Remove wrong message in console without problem

* Remove warning with & in some tooltips and TP_WBALANCE_AUTO_HEADER

* Smoothcie Method GUI

* Replace checkbutton smooth highlight bya combobox

* Improve behavior GUI - CIECAM - advanced - tempout and greenout

* Fixed - I hope - crash when delete spot and cam16

* Clean code with maxcam and dependencies

* Added Smooth highlight rolloff or not

* Improve smooth lights - gamma mode only - standard and advanced - gray balance

* Improve Smoothing lights - take into account the 2 Yb

* Change tooltip

* Chnage wrong lable scope => slope

* Clean and comment code

* Reduces the effect of - Smoothing light -Ev mode - Small change range Slope

* Scale Yb scene white whiteEv

* Hide Scale in some GUI cases

* Clean comment code Smotth and TM function

* Change GUI - Smooth highlights and tone mapping - allows also Basic

* Change labels

* Change tooltip

* Remove arrow.cur in windows.yml as suggested by Lawrence37

* Reverse last changes

* Change limits slope based in SDA

* Clean locallabtools2.cc

* Set minimum slope based to 0.6

* Change label highlight

* Change listener scene parameters to GUI

* Clean code sine changes listener

* Limits Blackev Whiteev values in slope base to avoid crash

* Change a little limits BlackEv WhiteEv

* Small changes in console - remove warnings

* Change XYZ relative - avoid color shift

* Improve gamutmap

* re build gamutmap

rtdata/languages/default

@@ -1311,7 +1311,7 @@ HISTORY_MSG_1078;Local - Red and skin protection
 HISTORY_MSG_1079;Local - CIECAM Sigmoid strength J
 HISTORY_MSG_1080;Local - CIECAM Sigmoid threshold
 HISTORY_MSG_1081;Local - CIECAM Sigmoid blend
-HISTORY_MSG_1082;Local - CIECAM Sigmoid Q BlackEv WhiteEv
+HISTORY_MSG_1082;Local - CIECAM Auto threshold
 HISTORY_MSG_1083;Local - CIECAM Hue
 HISTORY_MSG_1084;Local - Uses Black Ev - White Ev
 HISTORY_MSG_1085;Local - Jz lightness
@@ -1427,22 +1427,79 @@ HISTORY_MSG_ICL_LABGRIDCIEXY;Cie xy
 HISTORY_MSG_ICM_AINTENT;Abstract profile intent
 HISTORY_MSG_ICM_BLUX;Primaries Blue X
 HISTORY_MSG_ICM_BLUY;Primaries Blue Y
+HISTORY_MSG_ICM_CAT;Matrix adaptation
 HISTORY_MSG_ICM_FBW;Black and White
 HISTORY_MSG_ICM_GAMUT;Gamut control
 HISTORY_MSG_ICM_GREX;Primaries Green X
 HISTORY_MSG_ICM_GREY;Primaries Green Y
+HISTORY_MSG_ICM_MIDTCIE;Midtones
 HISTORY_MSG_ICM_OUTPUT_PRIMARIES;Output - Primaries
 HISTORY_MSG_ICM_OUTPUT_TEMP;Output - ICC-v4 illuminant D
 HISTORY_MSG_ICM_OUTPUT_TYPE;Output - Type
 HISTORY_MSG_ICM_PRESER;Preserve neutral
 HISTORY_MSG_ICM_REDX;Primaries Red X
 HISTORY_MSG_ICM_REDY;Primaries Red Y
+HISTORY_MSG_ICM_REFI;Refinement Colors
+HISTORY_MSG_ICM_SHIFTX;Refinement Colors - shift x
+HISTORY_MSG_ICM_SHIFTY;Refinement Colors - shift y
+HISTORY_MSG_ICM_SMOOTHCIE;Smooth highlights
+HISTORY_MSG_ICM_TRCEXP;Abstract Profile
 HISTORY_MSG_ICM_WORKING_GAMMA;TRC - Gamma
 HISTORY_MSG_ICM_WORKING_ILLUM_METHOD;Illuminant method
 HISTORY_MSG_ICM_WORKING_PRIM_METHOD;Primaries method
 HISTORY_MSG_ICM_WORKING_SLOPE;TRC - Slope
 HISTORY_MSG_ICM_WORKING_TRC_METHOD;TRC method
 HISTORY_MSG_ILLUM;CAL - SC - Illuminant
+HISTORY_MSG_LOCAL_CIE_ANGGRAD;Local CIECAM - gradient angle
+HISTORY_MSG_LOCAL_CIE_BRICOMP;Local CIECAM Brightness compression
+HISTORY_MSG_LOCAL_CIE_BRICOMPTH;Local CIECAM Brightness compression threshold
+HISTORY_MSG_LOCAL_CIE_CAT;Matrix adaptation
+HISTORY_MSG_LOCAL_CIE_DETAILJZ;Local JzCzHz Local contrast
+HISTORY_MSG_LOCAL_CIE_ENAMASKALL;Local CIECAM All mask tools
+HISTORY_MSG_LOCAL_CIE_EXPPRECAM;Local CIECAM Pre-Cam
+HISTORY_MSG_LOCAL_CIE_GAM;Local CIECAM Gamma
+HISTORY_MSG_LOCAL_CIE_GAMUTCIE;Local CIECAM Gamut
+HISTORY_MSG_LOCAL_CIE_ILL;Local CIECAM TRC Illuminant
+HISTORY_MSG_LOCAL_CIE_LOGCIEQ;Local CIECAM Log encoding Q
+HISTORY_MSG_LOCAL_CIE_MIDT;Local CIECAM Mid Tones
+HISTORY_MSG_LOCAL_CIE_NORM;Local CIECAM Normalize L
+HISTORY_MSG_LOCAL_CIE_PRIM;Local CIECAM TRC Primaries
+HISTORY_MSG_LOCAL_CIE_REFI;Local CIECAM Refinement Colors
+HISTORY_MSG_LOCAL_CIE_SIG;Sigmoid
+HISTORY_MSG_LOCAL_CIE_SIGADAP;Local CIECAM Sigmoid adaptability
+HISTORY_MSG_LOCAL_CIE_SIGMET;Local CIECAM - Sigmoid method
+HISTORY_MSG_LOCAL_CIE_SLOP;Local CIECAM - Slope
+HISTORY_MSG_LOCAL_CIE_SLOPESMO;Local CIECAM - Gray balance
+HISTORY_MSG_LOCAL_CIE_SMOOTHMET;Local CIECAM - Smooth lights method
+HISTORY_MSG_LOCAL_CIE_STRGRAD;Local CIECAM - gradient strength L
+HISTORY_MSG_LOCAL_CIE_TRC;Local CIECAM - TRC
+HISTORY_MSG_LOCAL_CIE_REDXL;Local CIECAM - Red X
+HISTORY_MSG_LOCAL_CIE_REDYL;Local CIECAM - Red Y
+HISTORY_MSG_LOCAL_CIE_GREXL;Local CIECAM - Green X
+HISTORY_MSG_LOCAL_CIE_GREYL;Local CIECAM - Green Y
+HISTORY_MSG_LOCAL_CIE_BLACKS;Local CIECAM - Blacks distribution
+HISTORY_MSG_LOCAL_CIE_BLUXL;Local CIECAM - Blue X
+HISTORY_MSG_LOCAL_CIE_BLUYL;Local CIECAM - Blue Y
+HISTORY_MSG_LOCAL_CIE_SHIFTXL;Local CIECAM - Shift x
+HISTORY_MSG_LOCAL_CIE_SHIFTYL;Local CIECAM - Shift y
+HISTORY_MSG_LOCAL_CIE_SMOOTH;Local CIECAM - Scale Yb Scene
+HISTORY_MSG_LOCAL_CIE_SATCIE;Local CIECAM - Saturation control
+HISTORY_MSG_LOCAL_CIE_STRLOG;Local CIECAM - Log encoding strength
+HISTORY_MSG_LOCAL_CIE_WHITES;Local CIECAM - Whites distribution
+HISTORY_MSG_LOCAL_CIEMASK_BLURCONT;Local Cie mask blur contrast
+HISTORY_MSG_LOCAL_CIEMASK_BLURFFT;Local Cie mask blur fftw
+HISTORY_MSG_LOCAL_CIEMASK_BLURRAD;Local Cie mask blur radius
+HISTORY_MSG_LOCAL_CIEMASK_CHH;Local Cie mask curve hh
+HISTORY_MSG_LOCAL_CIEMASK_HIGH;Local Cie mask highlights
+HISTORY_MSG_LOCAL_CIEMASK_SHAD;Local Cie mask shadows
+HISTORY_MSG_LOCAL_CIEMASK_STRU;Local Cie mask structure
+HISTORY_MSG_LOCAL_CIEMASK_STRU_TOOL;Local Cie mask structure as tool
+HISTORY_MSG_LOCAL_CIEMASK_WLC;Local CIECAM mask wavelet Lc
+HISTORY_MSG_LOCAL_CIEMASK_WLEV;Local CIECAM mask wavelet levels
+HISTORY_MSG_LOCAL_LOG_BLACKS;Local Log - Blacks distribution
+HISTORY_MSG_LOCAL_LOG_COMPR;Local Log - Compress brightness
+HISTORY_MSG_LOCAL_LOG_SAT;Local Log - Saturation control
+HISTORY_MSG_LOCAL_LOG_WHITES;Local Log - Whites distribution
 HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
 HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness
 HISTORY_MSG_LOCALCONTRAST_ENABLED;Local Contrast
@@ -2175,6 +2232,7 @@ TC_PRIM_GREX;Gx
 TC_PRIM_GREY;Gy
 TC_PRIM_REDX;Rx
 TC_PRIM_REDY;Ry
+TC_PRIM_REFI;Refine colors (white-point)
 THRESHOLDSELECTOR_B;Bottom
 THRESHOLDSELECTOR_BL;Bottom-left
 THRESHOLDSELECTOR_BR;Bottom-right
@@ -2662,9 +2720,16 @@ TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile
 TP_ICM_TONECURVE;Tone curve
 TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only available if the selected DCP has a tone curve.
 TP_ICM_TRCFRAME;Abstract Profile
-TP_ICM_TRCFRAME_TOOLTIP;Also known as 'synthetic' or 'virtual' profiles, which are applied at the end of the processing pipeline (prior to ciecam) allowing you to create custom image effects.\nYou can make changes to the:\n 'Tone response curve', which modifies the tones of the image.\n 'Illuminant' : which allows you to change the profile primaries to adapt them to the shooting conditions.\n 'Destination primaries': which allows you to change the destination primaries with two main uses - channel mixer and calibration.\nNote: Abstract profiles take into account the built-in Working profiles without modifying them. They do not work with custom Working profiles.
+TP_ICM_TRCFRAME_TOOLTIP;Also known as 'synthetic' or 'virtual' profiles, which are applied at the end of the processing pipeline (prior to ciecam) allowing you to create custom image effects.\nYou can make changes to the:\n 'Tone response curve', which modifies the tones of the image.\n 'Illuminant' : which allows you to change the profile primaries to adapt them to the shooting conditions.\n 'Destination primaries': which allows you to change the destination primaries with three main uses - channel mixer, restore image color (saturation), calibration.\nNote: Abstract profiles take into account the built-in Working profiles without modifying them. They do not work with custom Working profiles.
 TP_ICM_TRC_TOOLTIP;Allows you to change the default sRGB 'Tone response curve' in RT (g=2.4 s=12.92).\nThis TRC modifies the tones of the image. The RGB and Lab values, histogram and output (screen, TIF, JPG) are changed:\n-Gamma acts mainly on light tones -Slope acts mainly on dark tones.\nYou can choose any pair of 'gamma and slope' (values >1) and the algorithm will ensure that there is continuity between the linear and parabolic parts of the curve.\nA selection other than 'none' activates the 'Illuminant' and 'Destination primaries' menus.
 TP_ICM_WORKINGPROFILE;Working Profile
+TP_ICM_WORKING_CAT;Matrix adaptation
+TP_ICM_WORKING_CAT_BRAD;Bradford
+TP_ICM_WORKING_CAT_CAT16;Cat16
+TP_ICM_WORKING_CAT_CAT02;Cat02
+TP_ICM_WORKING_CAT_TOOLTIP;Performs the chromatic adaptation of the XYZ conversion matrix. Default Bradford
+TP_ICM_WORKING_CAT_VK;Von Kries
+TP_ICM_WORKING_CAT_XYZ;XYZ scale
 TP_ICM_WORKING_CIEDIAG;CIE xy diagram
 TP_ICM_WORKING_ILLU;Illuminant
 TP_ICM_WORKING_ILLU_1500;Tungsten 1500K
@@ -2676,10 +2741,13 @@ TP_ICM_WORKING_ILLU_D60;D60
 TP_ICM_WORKING_ILLU_D65;D65
 TP_ICM_WORKING_ILLU_D80;D80
 TP_ICM_WORKING_ILLU_D120;D120
+TP_ICM_WORKING_ILLU_E;E
 TP_ICM_WORKING_ILLU_NONE;Default
 TP_ICM_WORKING_ILLU_STDA;stdA 2875K
+TP_ICM_WORKING_NON;None
 TP_ICM_WORKING_PRESER;Preserves Pastel tones
 TP_ICM_WORKING_PRIM;Destination primaries
+TP_ICM_WORKING_PRIM_TOOLTIP;Destination primaries (Advanced): which allows you to change the destination primaries to restore or change image color (saturation), the color balance is significantly preserved when the 'Working Profile' and the 'Destination primaries' are not too different, 'Working Profiles' are not modified. Perform a gamut control.\nWhen 'Custom LA (sliders)' is selected you can modify the values of the 3 primaries Red, Green, Blue for X and Y.
 TP_ICM_WORKING_PRIMFRAME_TOOLTIP;When 'Custom CIE xy diagram' is selected in 'Destination- primaries'' combobox, you can modify the values of the 3 primaries directly on the graph.\nNote that in this case, the white point position on the graph will not be updated.
 TP_ICM_WORKING_PRIM_AC0;ACESp0
 TP_ICM_WORKING_PRIM_ACE;ACESp1
@@ -2689,7 +2757,9 @@ TP_ICM_WORKING_PRIM_BRU;BruceRGB
 TP_ICM_WORKING_PRIM_BST;BestRGB
 TP_ICM_WORKING_PRIM_CUS;Custom (sliders)
 TP_ICM_WORKING_PRIM_CUSGR;Custom (CIE xy Diagram)
+TP_ICM_WORKING_PRIM_FREE;Custom LA (sliders)
 TP_ICM_WORKING_PRIM_JDCMAX;JDC Max
+TP_ICM_WORKING_PRIM_JDCMAXSTDA;JDC Max stdA
 TP_ICM_WORKING_PRIM_NONE;Default
 TP_ICM_WORKING_PRIM_PROP;ProPhoto
 TP_ICM_WORKING_PRIM_REC;Rec2020
@@ -2770,9 +2840,9 @@ TP_LOCALLAB_AMOUNT;Amount
 TP_LOCALLAB_ARTIF;Shape detection
 TP_LOCALLAB_ARTIF_TOOLTIP;ΔE scope threshold increases the range of ΔE scope. High values are for very wide gamut images.\nIncreasing ΔE decay can improve shape detection, but can also reduce the scope.
 TP_LOCALLAB_AUTOGRAY;Auto mean luminance (Yb%)
-TP_LOCALLAB_AUTOGRAYCIE;Auto
+TP_LOCALLAB_AUTOGRAYCIE;Automatic
 TP_LOCALLAB_AVOID;Avoid color shift
-TP_LOCALLAB_AVOIDCOLORSHIFT_TOOLTIP;Fit colors into gamut of the working color space and apply Munsell correction (Uniform Perceptual Lab).\nMunsell correction always disabled when Jz or CAM16 or Color Appearance and Lighting is used.\n\nDefault: Munsell.\nMunsell correction: fixes Lab mode hue drifts due to non-linearity, when chromaticity is changed (Uniform Perceptual Lab).\nLab: applies a gamut control, in relative colorimetric, Munsell is then applied.\nXYZ Absolute, applies gamut control, in absolute colorimetric, Munsell is then applied.\nXYZ Relative, applies gamut control, in relative colorimetric, Munsell is then applied.
+TP_LOCALLAB_AVOIDCOLORSHIFT_TOOLTIP;Fit colors into gamut of the working color space and apply Munsell correction (Uniform Perceptual Lab).\n\nDefault: Munsell only.\nMunsell only, fixes Lab mode hue drifts due to non-linearity, when chromaticity is changed (Uniform Perceptual Lab).\nLab, applies a gamut control, in relative colorimetric, Munsell is then applied.\nXYZ Absolute, applies gamut control, in absolute colorimetric, Munsell is then applied.\nXYZ Relative, applies gamut control, in relative colorimetric, Munsell is then applied.
 TP_LOCALLAB_AVOIDMUN;Munsell correction only
 TP_LOCALLAB_AVOIDMUN_TOOLTIP;Munsell correction always disabled when Jz or CAM16 is used.
 TP_LOCALLAB_AVOIDRAD;Soft radius
@@ -2815,9 +2885,12 @@ TP_LOCALLAB_BUTTON_DEL;Delete
 TP_LOCALLAB_BUTTON_DUPL;Duplicate
 TP_LOCALLAB_BUTTON_REN;Rename
 TP_LOCALLAB_BUTTON_VIS;Show/Hide
+TP_LOCALLAB_BWEVNONE;None
+TP_LOCALLAB_BWEVSIG;Activated
+TP_LOCALLAB_BWEVSIGLOG;Sigmoid & Log-Encoding
 TP_LOCALLAB_BWFORCE;Uses Black Ev & White Ev
 TP_LOCALLAB_CAM16PQREMAP;HDR PQ (Peak Luminance)
-TP_LOCALLAB_CAM16PQREMAP_TOOLTIP;PQ (Perceptual Quantizer) adapted to CAM16. Allows you to change the internal PQ function (usually 10000 cd/m2 - default 100 cd/m2 - disabled for 100 cd/m2).\nCan be used to adapt to different devices and images.
+TP_LOCALLAB_CAM16PQREMAP_TOOLTIP;PQ (Perceptual Quantizer) adapted to CAM16 (experimental). Allows you to change the internal PQ function (usually 10000 cd/m2 - default 100 cd/m2 - disabled for 100 cd/m2).\nCan be used to adapt to different devices and images. For example to match Cam16 processing with the maximum monitor brightness of 400cd/m2.
 TP_LOCALLAB_CAM16_FRA;Cam16 Image Adjustments
 TP_LOCALLAB_CAMMODE;CAM model
 TP_LOCALLAB_CAMMODE_CAM16;CAM 16
@@ -2844,6 +2917,11 @@ TP_LOCALLAB_CHROMASK_TOOLTIP;Changes the chroma of the mask if one exists (i.e.
 TP_LOCALLAB_CHROML;Chroma (C)
 TP_LOCALLAB_CHRRT;Chroma
 TP_LOCALLAB_CIE;Color appearance (Cam16 & JzCzHz)
+TP_LOCALLAB_CIE_SMOOTH_NONE;None
+TP_LOCALLAB_CIE_SMOOTH_EV;Ev based
+TP_LOCALLAB_CIE_SMOOTHFRAME;Highlight attenuation
+TP_LOCALLAB_CIE_SMOOTH_GAMMA;Slope based
+TP_LOCALLAB_CIE_SMOOTH_GAMMA ROLLOFF;Gamma based
 TP_LOCALLAB_CIEC;Use Ciecam environment parameters
 TP_LOCALLAB_CIECAMLOG_TOOLTIP;This module is based on the CIECAM color appearance model which was designed to better simulate how human vision perceives colors under different lighting conditions.\nThe first Ciecam process 'Scene conditions' is carried out by Log encoding, it also uses 'Absolute luminance' at the time of shooting.\nThe second Ciecam process 'Image adjustments' is simplified and uses only 3 variables (local contrast, contrast J, saturation s).\nThe third Ciecam process 'Viewing conditions' adapts the output to the intended viewing conditions (monitor, TV, projector, printer, etc.) so that the chromatic and contrast appearance is preserved across the display environment.
 TP_LOCALLAB_CIECOLORFRA;Color
@@ -2878,10 +2956,14 @@ TP_LOCALLAB_COLORSCOPE;Scope (color tools)
 TP_LOCALLAB_COLORSCOPE_TOOLTIP;Common Scope slider for Color and Light, Shadows/Highlights, Vibrance.\nOther tools have their own scope controls.
 TP_LOCALLAB_COLOR_CIE;Color curve
 TP_LOCALLAB_COLOR_TOOLNAME;Color & Light
+TP_LOCALLAB_COLORFRAME;Dominant color
 TP_LOCALLAB_COL_NAME;Name
 TP_LOCALLAB_COL_VIS;Status
 TP_LOCALLAB_COMPFRA;Directional contrast
 TP_LOCALLAB_COMPREFRA;Wavelet level tone mapping
+TP_LOCALLAB_COMPRCIE;Brightness compression
+TP_LOCALLAB_COMPRCIETH;Compression threshold
+TP_LOCALLAB_COMPRLOG_TOOLTIP;This algorithm compress the data before log conversion, above the theshold slider value. To use in conjunction with Whites distribution.
 TP_LOCALLAB_CONTCOL;Contrast threshold
 TP_LOCALLAB_CONTFRA;Contrast by level
 TP_LOCALLAB_CONTRAST;Contrast
@@ -2912,7 +2994,7 @@ TP_LOCALLAB_DELTAD;Delta balance
 TP_LOCALLAB_DELTAEC;ΔE Image mask
 TP_LOCALLAB_DENOI1_EXP;Denoise based on luminance mask
 TP_LOCALLAB_DENOI2_EXP;Recovery based on luminance mask
-TP_LOCALLAB_DENOIBILAT_TOOLTIP;Allows you to reduce impulse or 'salt & pepper' noise.
+TP_LOCALLAB_DENOIBILAT_TOOLTIP;Allows you to reduce impulse or 'salt & pepper' noise.
 TP_LOCALLAB_DENOICHROC_TOOLTIP;Allows you to deal with blotches and packets of noise.
 TP_LOCALLAB_DENOICHRODET_TOOLTIP;Allows you to recover chrominance detail by progressively applying a Fourier transform (DCT).
 TP_LOCALLAB_DENOICHROF_TOOLTIP;Allows you to adjust fine-detail chrominance noise.
@@ -2932,6 +3014,7 @@ TP_LOCALLAB_DETAIL;Local contrast
 TP_LOCALLAB_DETAILFRA;Edge detection - DCT
 TP_LOCALLAB_DETAILSH;Details
 TP_LOCALLAB_DETAILTHR;Lum/chrom detail threshold
+TP_LOCALLAB_DISAB_CIECAM;Disable Ciecam or Weak Jz surround
 TP_LOCALLAB_DIVGR;Gamma
 TP_LOCALLAB_DUPLSPOTNAME;Copy
 TP_LOCALLAB_EDGFRA;Edge sharpness
@@ -2939,6 +3022,7 @@ TP_LOCALLAB_EDGSHOW;Show all tools
 TP_LOCALLAB_ELI;Ellipse
 TP_LOCALLAB_ENABLE_AFTER_MASK;Use Tone Mapping
 TP_LOCALLAB_ENABLE_MASK;Enable mask
+TP_LOCALLAB_ENABLE_MASKALL;Enable all mask tools
 TP_LOCALLAB_ENABLE_MASKAFT;Use all algorithms Exposure
 TP_LOCALLAB_ENARETIMASKTMAP_TOOLTIP;If enabled the Mask uses Restored Data after Transmission Map instead of Original data.
 TP_LOCALLAB_ENH;Enhanced
@@ -2970,7 +3054,7 @@ TP_LOCALLAB_EXPCONTRASTPYR_TOOLTIP;See the documentation for Wavelet Levels.\nTh
 TP_LOCALLAB_EXPCONTRAST_TOOLTIP;Avoid spots that are too small ( < 32x32 pixels).\nUse low 'Transition value' and high 'Transition decay' and 'Scope' to simulate small spots and deal with defects.\nUse 'Clarity and Sharp mask and Blend and Soften Images' if necessary by adjusting 'Soft radius' to reduce artifacts.
 TP_LOCALLAB_EXPCURV;Curves
 TP_LOCALLAB_EXPGRAD;Graduated Filter
-TP_LOCALLAB_EXPGRADCOL_TOOLTIP;A graduated filter is available in Color and Light (luminance, chrominance & hue gradients, and 'Merge file'), Exposure (luminance grad.), Exposure Mask (luminance grad.), Shadows/Highlights (luminance grad.), Vibrance (luminance, chrominance & hue gradients), Local contrast & wavelet pyramid (local contrast grad.).\nFeather is located in Settings.
+TP_LOCALLAB_EXPGRADCOL_TOOLTIP;A graduated filter is available in Color and Light (luminance, chrominance &amp; hue gradients, and 'Merge file'), Exposure (luminance grad.), Exposure Mask (luminance grad.), Shadows/Highlights (luminance grad.), Vibrance (luminance, chrominance &amp; hue gradients), Local contrast &amp; wavelet pyramid (local contrast grad.).\nFeather is located in Settings.
 TP_LOCALLAB_EXPLAPBAL_TOOLTIP;Changes the transformed/original image blend.
 TP_LOCALLAB_EXPLAPGAMM_TOOLTIP;Changes the behaviour for images with too much or too little contrast by adding a gamma curve before and after the Laplace transform.
 TP_LOCALLAB_EXPLAPLIN_TOOLTIP;Changes the behaviour for underexposed images by adding a linear component prior to applying the Laplace transform.
@@ -3134,8 +3218,11 @@ TP_LOCALLAB_LOGAUTOGRAY_TOOLTIP;Automatically calculates the 'Mean luminance' fo
 TP_LOCALLAB_LOGAUTO_TOOLTIP;Pressing this button will calculate the dynamic range and 'Mean luminance' for the scene conditions if the 'Auto mean luminance (Yb%)' is checked).\nAlso calculates the absolute luminance at the time of shooting.\nPress the button again to adjust the automatically calculated values.
 TP_LOCALLAB_LOGBASE_TOOLTIP;Default = 2.\nValues less than 2 reduce the action of the algorithm making the shadows darker and the highlights brighter.\nWith values greater than 2, the shadows are grayer and the highlights become more washed out.
 TP_LOCALLAB_LOGCATAD_TOOLTIP;Chromatic adaptation allows us to interpret a color according to its spatio-temporal environment.\nUseful when the white balance deviates significantly from the D50 reference.\nAdapts colors to the illuminant of the output device.
-TP_LOCALLAB_LOGCIE;Log encoding instead of Sigmoid
-TP_LOCALLAB_LOGCIE_TOOLTIP;Allows you tu use Black Ev, White Ev, Scene Mean luminance(Yb%) and Viewing Mean luminance(Yb%) for tone-mapping using Log encoding Q.
+TP_LOCALLAB_LOGCIE;Log encoding
+TP_LOCALLAB_LOGCIE_TOOLTIP;Allows you tu use Black Ev, White Ev, White and Black distribution, Scene Mean luminance(Yb%) and Viewing Mean luminance(Yb%) for tone-mapping using 'Log encoding' with Brightness compression.
+TP_LOCALLAB_LOGCIEQ;Log Encoding Q (with Ciecam)
+TP_LOCALLAB_LOGCIEQ_TOOLTIP;Activating the checkbox allows you to switch between log encoding based on the 3 RGB channels, and log encoding based solely on Ciecam’s brightness (Q) channel.\nUsing the Q channel instead of the RGB channels helps avoid undesirable edge effects such as hue and saturation shifts.\nHowever, the settings are more difficult to optimise because Q is unbounded and Ciecam alters the data to take into account the surround conditions, simultaneous contrast etc.:\nThe user may have to adjust the following:\n   Scene conditions: Mean luminance (Yb), Whites &amp; Blacks distribution, Black Ev, White Ev.\n   Source Data Adjustments : Brightness compression, Strength.\n\nNote: when using Log Encoding (Q), be careful not to activate the Disable Ciecam option in the Scene Conditions, Surround menu.
+
 TP_LOCALLAB_LOGCOLORFL;Colorfulness (M)
 TP_LOCALLAB_LOGCOLORF_TOOLTIP;Perceived amount of hue in relation to gray.\nIndicator that a stimulus appears more or less colored.
 TP_LOCALLAB_LOGCONQL;Contrast (Q)
@@ -3143,7 +3230,7 @@ TP_LOCALLAB_LOGCONTHRES;Contrast threshold (J & Q)
 TP_LOCALLAB_LOGCONTL;Contrast (J)
 TP_LOCALLAB_LOGCONTL_TOOLTIP;Contrast (J) in CIECAM16 takes into account the increase in perceived coloration with luminance.
 TP_LOCALLAB_LOGCONTQ_TOOLTIP;Contrast (Q) in CIECAM16 takes into account the increase in perceived coloration with brightness.
-TP_LOCALLAB_LOGCONTTHRES_TOOLTIP;Adjusts the mid-tone contrast range (J & Q).\nPositive values progressively reduce the effect of the Contrast sliders (J & Q). Negative values progressively increase the effect of the Contrast sliders.
+TP_LOCALLAB_LOGCONTTHRES_TOOLTIP;Adjusts the mid-tone contrast range (J &amp; Q).\nPositive values progressively reduce the effect of the Contrast sliders (J &amp; Q). Negative values progressively increase the effect of the Contrast sliders.
 TP_LOCALLAB_LOGDETAIL_TOOLTIP;Acts mainly on high frequencies.
 TP_LOCALLAB_LOGENCOD_TOOLTIP;Tone Mapping with Logarithmic encoding (ACES).\nUseful for underexposed images or images with high dynamic range.\n\nTwo-step process: 1) Dynamic Range calculation 2) Manual adjustment.
 TP_LOCALLAB_LOGEXP;All tools
@@ -3156,6 +3243,7 @@ TP_LOCALLAB_LOGLIGHTQ;Brightness (Q)
 TP_LOCALLAB_LOGLIGHTQ_TOOLTIP;Perceived amount of light emanating from a stimulus.\nIndicator that a stimulus appears to be more or less bright, clear.
 TP_LOCALLAB_LOGLIN;Logarithm mode
 TP_LOCALLAB_LOGPFRA;Relative Exposure Levels
+TP_LOCALLAB_LOGPFRA2;Log Encoding settings
 TP_LOCALLAB_LOGREPART;Overall strength
 TP_LOCALLAB_LOGREPART_TOOLTIP;Allows you to adjust the relative strength of the log-encoded image with respect to the original image.\nDoes not affect the Ciecam component.
 TP_LOCALLAB_LOGSATURL_TOOLTIP;Saturation (s) in CIECAM16 corresponds to the color of a stimulus in relation to its own brightness.\nActs mainly on medium tones and on the highlights.
@@ -3225,7 +3313,7 @@ TP_LOCALLAB_MASKRESRETI_TOOLTIP;Used to modulate the effect of the Retinex (Lumi
 TP_LOCALLAB_MASKRESTM_TOOLTIP;Used to modulate the effect of the Tone Mapping settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The 'dark' and 'light' areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Tone Mapping settings \n In between these two areas, the full value of the Tone Mapping settings will be applied.
 TP_LOCALLAB_MASKRESVIB_TOOLTIP;Used to modulate the effect of the Vibrance and Warm Cool settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The 'dark' and 'light' areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Vibrance and Warm Cool settings \n In between these two areas, the full value of the Vibrance and Warm Cool settings will be applied.
 TP_LOCALLAB_MASKRESWAV_TOOLTIP;Used to modulate the effect of the Local contrast and Wavelet settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The 'dark' and 'light' areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Local contrast and Wavelet settings \n In between these two areas, the full value of the Local contrast and Wavelet settings will be applied.
-TP_LOCALLAB_MASKUNUSABLE;Mask disabled (Mask & modifications)
+TP_LOCALLAB_MASKUNUSABLE;Mask disabled (Enable in Mask & modifications)
 TP_LOCALLAB_MASKUSABLE;Mask enabled (Mask & modifications)
 TP_LOCALLAB_MASK_TOOLTIP;You can enable multiple masks for a tool by activating another tool and using only the mask (set the tool sliders to 0 ).\n\nYou can also duplicate the spot and place it close to the first spot. The small variations in the spot references allow you to make fine adjustments.
 TP_LOCALLAB_MEDIAN;Median Low
@@ -3261,6 +3349,7 @@ TP_LOCALLAB_MERTHR;Difference
 TP_LOCALLAB_MERTWE;Exclusion
 TP_LOCALLAB_MERTWO;Subtract
 TP_LOCALLAB_METHOD_TOOLTIP;'Enhanced + chroma denoise' significantly increases processing times.\nBut reduce artifacts.
+TP_LOCALLAB_MIDTCIE;Midtones
 TP_LOCALLAB_MLABEL;Restored data Min=%1 Max=%2
 TP_LOCALLAB_MLABEL_TOOLTIP;The values should be close to Min=0 Max=32768 (log mode) but other values are possible.You can adjust 'Clip restored data (gain)' and 'Offset' to normalize.\nRecovers image data without blending.
 TP_LOCALLAB_MODE_EXPERT;Advanced
@@ -3307,11 +3396,19 @@ TP_LOCALLAB_ORRETILAP_TOOLTIP;Modifies ΔE prior to any changes made by 'Scope'.
 TP_LOCALLAB_ORRETISTREN_TOOLTIP;Acts on the Laplacian threshold, the greater the action, the more the differences in contrast will be reduced.
 TP_LOCALLAB_PASTELS2;Vibrance
 TP_LOCALLAB_PDE;Contrast Attenuator - Dynamic Range compression
+TP_LOCALLAB_PRECAM_TOOLTIP;This 'Source Data Adjustments' modifies: a)the Dynamic Range using Log encoding; b) the tones of the image and primaries(simplified Abstract Profile) and also midtones, just before the Ciecam process. The values are changed:\n-Gamma acts mainly on light tones -Slope acts mainly on dark tones.\nYou can choose any pair of 'gamma and slope' (values >1) and the algorithm will ensure that there is continuity between the linear and parabolic parts of the curve.\n\n\n-Destination primaries: which allows you to change the destination primaries to restore or change image color (saturation), the color balance is 'significantly' preserved  when the 'Working Profile' and the 'Destination primaries' are not too different (be careful), 'Working Profiles' are not modified.\nYou can also finely adapt the primaries and the illuminant (white-point).\nMoving a primary away from the white point reduces saturation and vice versa. Pay attention to the gamut.
+TP_LOCALLAB_PRECAMGAMUT_TOOLTIP;If checked ensures a gamut control just after primary conversion to XYZ matrix.
+TP_LOCALLAB_PRECAMREFI_TOOLTIP;Allows you to move the white-point in such a way that it approaches the dominant color. This action modifies the purity.
+TP_LOCALLAB_PRECAMREFIMAIN_TOOLTIP;Allows you to move the white-point in such a way that it approaches the dominant color. This action modifies the purity. In combination with "Shift x" and "Shift y" allows you to carry out moderate Color Toning.
 TP_LOCALLAB_PDEFRA;Contrast Attenuator ƒ
 TP_LOCALLAB_PDEFRAME_TOOLTIP;PDE IPOL algorithm adapted for Rawtherapee : gives different results and requires different settings compared to main-menu 'Exposure'.\nMay be useful for under-exposed or high dynamic range images.
 TP_LOCALLAB_PREVHIDE;Hide additional settings
 TP_LOCALLAB_PREVIEW;Preview ΔE
 TP_LOCALLAB_PREVSHOW;Show additional settings
+TC_LOCALLAB_PRIM_SHIFTX;Shift x
+TC_LOCALLAB_PRIM_SHIFTY;Shift y
+TC_LOCALLAB_PRIM_SHIFTX_TOOLTIP;In combination with "Refine colors" allows you:\n 1) for low values adjust the image purity.\n 2) for higher values, carry out moderate Color Toning.\n 3) Be careful not to go outside the CIE xy diagram.
+TP_LOCALLAB_PRIMILLFRAME;Primaries & Illuminant
 TP_LOCALLAB_PROXI;ΔE decay
 TP_LOCALLAB_QUAAGRES;Aggressive
 TP_LOCALLAB_QUACONSER;Conservative
@@ -3356,10 +3453,11 @@ TP_LOCALLAB_RETI_SCALE_TOOLTIP;If Scale=1, Retinex behaves like local contrast w
 TP_LOCALLAB_RET_TOOLNAME;Dehaze & Retinex
 TP_LOCALLAB_REWEI;Reweighting iterates
 TP_LOCALLAB_RGB;RGB Tone Curve
-TP_LOCALLAB_RGBCURVE_TOOLTIP;In RGB mode you have 4 choices : Standard, Weighted standard, Luminance & Film-like.
+TP_LOCALLAB_RGBCURVE_TOOLTIP;In RGB mode you have 4 choices : Standard, Weighted standard, Luminance &amp; Film-like.
 TP_LOCALLAB_ROW_NVIS;Not visible
 TP_LOCALLAB_ROW_VIS;Visible
 TP_LOCALLAB_RSTPROTECT_TOOLTIP;Red and skin-tone protection affects the Saturation, Chroma and Colorfulness sliders.
+TP_LOCALLAB_SATCIE;Saturation control
 TP_LOCALLAB_SATUR;Saturation
 TP_LOCALLAB_SATURV;Saturation (s)
 TP_LOCALLAB_SCALEGR;Scale
@@ -3380,7 +3478,7 @@ TP_LOCALLAB_SHADEXCOMP;Shadow compression
 TP_LOCALLAB_SHADHIGH;Shadows/Highlights & Tone Equalizer
 TP_LOCALLAB_SHADHMASK_TOOLTIP;Lowers the highlights of the mask in the same way as the shadows/highlights algorithm.
 TP_LOCALLAB_SHADMASK_TOOLTIP;Lifts the shadows of the mask in the same way as the shadows/highlights algorithm.
-TP_LOCALLAB_SHADOWHIGHLIGHT_TOOLTIP;Adjust shadows and highlights either with shadows & highlights sliders or with a tone equalizer.\nCan be used instead of, or in conjunction with the Exposure module.\nCan also be used as a graduated filter.
+TP_LOCALLAB_SHADOWHIGHLIGHT_TOOLTIP;Adjust shadows and highlights either with shadows &amp; highlights sliders or with a tone equalizer.\nCan be used instead of, or in conjunction with the Exposure module.\nCan also be used as a graduated filter.
 TP_LOCALLAB_SHAMASKCOL;Shadows
 TP_LOCALLAB_SHAPETYPE;Spot shape
 TP_LOCALLAB_SHAPE_TOOLTIP;'Ellipse' is the normal mode.\n 'Rectangle' can be used in certain cases, for example to work in full-image mode by placing the delimiters outside the preview area. In this case, set transition = 100.\n\nFuture developments will include polygon shapes and Bezier curves.
@@ -3426,17 +3524,36 @@ TP_LOCALLAB_SHOWVI;Mask and modifications
 TP_LOCALLAB_SHRESFRA;Shadows/Highlights & TRC
 TP_LOCALLAB_SHTRC_TOOLTIP;Based on 'working profile' (only those provided), modifies the tones of the image by acting on a TRC (Tone Response Curve).\nGamma acts mainly on light tones.\nSlope acts mainly on dark tones.\nIt is recommended that the TRC of both devices (monitor and output profile) be sRGB (default).
 TP_LOCALLAB_SH_TOOLNAME;Shadows/Highlights & Tone Equalizer
-TP_LOCALLAB_SIGFRA;Sigmoid Q & Log encoding Q
+TP_LOCALLAB_SIGCIE;Sigmoid
+TP_LOCALLAB_SIGFRA;Sigmoid Q 
+TP_LOCALLAB_SIGGAMJCIE;Gamma
 TP_LOCALLAB_SIGJZFRA;Sigmoid Jz
 TP_LOCALLAB_SIGMAWAV;Attenuation response
 TP_LOCALLAB_SIGMOIDBL;Blend
 TP_LOCALLAB_SIGMOIDLAMBDA;Contrast
-TP_LOCALLAB_SIGMOIDQJ;Uses Black Ev & White Ev
+TP_LOCALLAB_SIGMOIDLOGAUTO;Auto threshold
+TP_LOCALLAB_SIGMOIDQJ;Black Ev & White Ev
+TP_LOCALLAB_SIGMOIDSENSI;Adaptability
 TP_LOCALLAB_SIGMOIDTH;Threshold (Gray point)
-TP_LOCALLAB_SIGMOID_TOOLTIP;Allows you to simulate a Tone-mapping appearance using both the'Ciecam' (or 'Jz') and 'Sigmoid' function.\nThree sliders: a) Contrast acts on the shape of the sigmoid curve and consequently on the strength; b) Threshold (Gray point) distributes the action according to the luminance; c)Blend acts on the final aspect of the image, contrast and luminance.
+TP_LOCALLAB_SIGMOID_TOOLTIP;Allows you to simulate a Tone-mapping appearance using both the 'Jz' and 'Sigmoid' function.\nThree sliders: a) Contrast acts on the shape of the sigmoid curve and consequently on the strength; b) Threshold (Gray point) distributes the action according to the luminance; c)Blend acts on the final aspect of the image, contrast and luminance.
+TP_LOCALLAB_SIGMOID16_TOOLTIP;Allows you to simulate a Tone-mapping appearance using both the'Ciecam' and 'Sigmoid Q'.\nSigmoid Q: three sliders: a) Contrast acts on the shape of the sigmoid curve and consequently on the strength; b) Threshold (Gray point) distributes the action according to the luminance; c)Adaptability weights the action of the sigmoid by action on the internal exponential function.
+TP_LOCALLAB_SIGMOIDLOGEV_TOOLTIP;If the comboxbox selection 'Black Ev and White Ev' is 'Sigmoid and Log encoding' instead of 'Sigmoid only', the two algorithms 'Log encoding' and 'Sigmoid' are used together.
+TP_LOCALLAB_SIGMOIDNORMCIE;Normalize Luminance
+TP_LOCALLAB_SIGMOIDNORMCIE_TOOLTIP;Reconstruct luminance so that the mean and variance of the output image take into account those of the original.\nAll the adjustments acting on J or Q are taken into account, including those which are not relative to Sigmoid Q.
+TP_LOCALLAB_SIGMOIDNORMCIEBLEND_TOOLTIP;Blend acts on the final aspect of the image, contrast and luminance : ratio between original and output image.
+TP_LOCALLAB_SIGMOIDQJCOMPRCIE_TOOLTIP;When the comboxbox selection'Uses Black Ev and White Ev' is 'Sigmoid and Log encoding Q' or 'Log encoding instead of Sigmoid' checked. This algorithm compress the data above the threshold slider value. This last value stands for brightness (Q) should be a near the possible value 'Compression treshold' (calculate when 'Auto threshold" checked, often > 1).
+TP_LOCALLAB_SIGSLOPJCIE;Slope
+TP_LOCALLAB_SIGTRCCIE;Source Data Adjustments
+TP_LOCALLAB_SIGBLACKSSCIE;Blacks distribution
+TP_LOCALLAB_SIGWHITESCIE;Whites distribution
+TP_LOCALLAB_SIGMOIDWHITESCIE_TOOLTIP;Allows you, in Automatic, when the dynamic range of the image is high, to change the distribution of lights in whites and deep blacks.\nCan be used with Log encoding or Sigmoid with Black Ev and White Ev enabled.\n\nThe algorithm does not change the basic data, but acts on the components necessary to calculate the Dynamic range, Black Ev, White Ev and the Gray point.
 TP_LOCALLAB_SLOMASKCOL;Slope
 TP_LOCALLAB_SLOMASK_TOOLTIP;Adjusting Gamma and Slope can provide a soft and artifact-free transformation of the mask by progressively modifying 'L' to avoid any discontinuities.
+TP_LOCALLAB_SLOPESMOOTH;Gray balance (Slope)
 TP_LOCALLAB_SLOSH;Slope
+TP_LOCALLAB_SMOOTHCIE;Smooth & Tone-Mapping
+TP_LOCALLAB_SMOOTHCIE_SCA;Scale Yb Scene
+TP_LOCALLAB_SMOOTHCIE_TOOLTIP;Completes the processing carried out by gamma, slope and midtones by causing a slight lowering of lights. Please note this does not replace Highlight reconstruction.\n\nGamma - Slope - based: choice (Standard and Advanced) allows you to simulate a "Tone mapping" using: a) Scene conditions: Black-Ev, White-Ev, Mean luminance (Yb%); b) Viewing conditions: Mean luminance (Yb%).\nScale Yb Scene is function of White-Ev.
 TP_LOCALLAB_SOFT;Soft Light & Original Retinex
 TP_LOCALLAB_SOFTM;Soft Light
 TP_LOCALLAB_SOFTMETHOD_TOOLTIP;Apply a Soft-light blend (identical to the global adjustment). Carry out dodge and burn using the original Retinex algorithm.
@@ -3458,13 +3575,14 @@ TP_LOCALLAB_STRENG;Strength
 TP_LOCALLAB_STRENGR;Strength
 TP_LOCALLAB_STRENGRID_TOOLTIP;You can adjust the desired effect with 'strength', but you can also use the 'scope' function which allows you to delimit the action (e.g. to isolate a particular color).
 TP_LOCALLAB_STRENGTH;Noise
+TP_LOCALLAB_STRENGTHCIELOG;Strength
 TP_LOCALLAB_STRGRID;Strength
 TP_LOCALLAB_STRUC;Structure
 TP_LOCALLAB_STRUCCOL;Spot structure
 TP_LOCALLAB_STRUCCOL1;Spot structure
 TP_LOCALLAB_STRUCT_TOOLTIP;Uses the Sobel algorithm to take into account structure for shape detection.\nActivate 'Mask and modifications' > 'Show spot structure' (Advanced mode) to see a preview of the mask (without modifications).\n\nCan be used in conjunction with the Structure Mask, Blur Mask and 'Local contrast' (by wavelet level) to improve edge detection.\n\nEffects of adjustments using Lightness, Contrast, Chrominance, Exposure or other non-mask-related tools visible using either 'Show modified image' or 'Show modified areas with mask'.
 TP_LOCALLAB_STRUMASKCOL;Structure mask strength
-TP_LOCALLAB_STRUMASK_TOOLTIP;Structure mask (slider) with the checkbox 'Structure mask as tool' unchecked: In this case a mask showing the structure will be generated even if none of the 3 curves is activated. Structure masks are available for mask (Blur and denoise') and mask(Color & Light).
+TP_LOCALLAB_STRUMASK_TOOLTIP;Structure mask (slider) with the checkbox 'Structure mask as tool' unchecked: In this case a mask showing the structure will be generated even if none of the 3 curves is activated. Structure masks are available for mask (Blur and denoise') and mask(Color &amp; Light).
 TP_LOCALLAB_STRUSTRMASK_TOOLTIP;Moderate use of this slider is recommended!
 TP_LOCALLAB_STYPE;Shape method
 TP_LOCALLAB_STYPE_TOOLTIP;You can choose between:\nSymmetrical - left handle linked to right, top handle linked to bottom.\nIndependent - all handles are independent.
@@ -3496,11 +3614,12 @@ TP_LOCALLAB_TRANSITGRAD;Transition differentiation XY
 TP_LOCALLAB_TRANSITGRAD_TOOLTIP;Allows you to vary the y-axis transition.
 TP_LOCALLAB_TRANSITVALUE;Transition value
 TP_LOCALLAB_TRANSITWEAK;Transition decay (linear-log)
-TP_LOCALLAB_TRANSITWEAK_TOOLTIP;Adjust transition decay function: 1 linear , 2 parabolic, 3 cubic up to ^25.\nCan be used in conjunction with very low transition values to reduce defects (CBDL, Wavelets, Color & Light).
+TP_LOCALLAB_TRANSITWEAK_TOOLTIP;Adjust transition decay function: 1 linear , 2 parabolic, 3 cubic up to ^25.\nCan be used in conjunction with very low transition values to reduce defects (CBDL, Wavelets, Color &amp; Light).
 TP_LOCALLAB_TRANSIT_TOOLTIP;Adjust smoothness of transition between affected and unaffected areas as a percentage of the 'radius'.
 TP_LOCALLAB_TRANSMISSIONGAIN;Transmission gain
 TP_LOCALLAB_TRANSMISSIONMAP;Transmission map
 TP_LOCALLAB_TRANSMISSION_TOOLTIP;Transmission according to transmission.\nAbscissa: transmission from negative values (min), mean, and positive values (max).\nOrdinate: amplification or reduction.\nYou can adjust this curve to change the Transmission and reduce artifacts.
+TP_LOCALLAB_TRCFRAME;Tone Response Curve & Midtones
 TP_LOCALLAB_USEMASK;Laplacian
 TP_LOCALLAB_VART;Variance (contrast)
 TP_LOCALLAB_VIBRANCE;Vibrance & Warm/Cool
@@ -4154,7 +4273,7 @@ TP_WAVELET_WAVOFFSET;Offset
 TP_WBALANCE_AUTO;Auto
 TP_WBALANCE_AUTOITCGREEN;Temperature correlation
 TP_WBALANCE_AUTOOLD;RGB grey
-TP_WBALANCE_AUTO_HEADER;Automatic & Refinement
+TP_WBALANCE_AUTO_HEADER;Automatic &amp; Refinement
 TP_WBALANCE_CAMERA;Camera
 TP_WBALANCE_CLOUDY;Cloudy
 TP_WBALANCE_CUSTOM;Custom