Fix issues in Locallab Exposure GUI according to Complexity mode
Another fixes: - Merge problems in default language file - Remove useless "printf"
This commit is contained in:
Pandagrapher
@@ -2291,185 +2291,6 @@ TP_LOCALLAB_BLMED;Median
|
||||
TP_LOCALLAB_BLMETHOD_TOOLTIP;Normal - direct blur and noise with all settings.\nInverse - Inverse blur and noise without scope and without enhanced algorithm.\nSymmetric - inverse blur and noise with all settings. Be careful some results may be curious
|
||||
TP_LOCALLAB_BLNORM;Normal
|
||||
TP_LOCALLAB_BLSYM;Symmetric
|
||||
TP_LOCALLAB_CENTER_X;Center X
|
||||
TP_LOCALLAB_CENTER_Y;Center Y
|
||||
TP_LOCALLAB_CBDL;Contrast by detail levels - Big defects : grease..
|
||||
TP_LOCALLAB_CLARITYML;Clarity
|
||||
TP_LOCALLAB_EXPCBDL_TOOLTIP;In the case of contaminated sensor (type "grease"), and when the area is important or for a series of small defects.\n\na) put the selection spot on a pronounced default (adapting its size if necessary); b) choose a wide selection area to cover most of the area affected by the defects; c) Select a fairly large transition value; d) act on levels 3 and 4 or lower by reducing the contrast (values below 100) and by acting on the chroma slider if necessary.
|
||||
TP_LOCALLAB_CHROMA;Chrominance
|
||||
TP_LOCALLAB_CHROMASKCOL;Chroma mask
|
||||
TP_LOCALLAB_GAMMASKCOL;Gamma mask
|
||||
TP_LOCALLAB_SLOMASKCOL;Slope mask
|
||||
TP_LOCALLAB_CHRRT;Chroma
|
||||
TP_LOCALLAB_CIRCRADIUS;Spot size
|
||||
TP_LOCALLAB_COFR;Color & Light - Small defects : red eyes, dust
|
||||
TP_LOCALLAB_EXPCOLOR_TOOLTIP;In the case of small defects.\n\nRed-eyes : red-centered circular selector, spot delimiters close to the eye, weak scope, "lightness" -100, "chrominance" -100.\n\nSpotIR :Circular selector centered on the defect, spot delimiters close to the default - reduce "chrominance", possibly act on "scope" to reduce the extent of the action.\n\nDust - grease (small) :Circular selector centered on the defect (adapt the size of the spot), spot delimiters not too close to the defect to allow an inconspicuous transition. a) "Transition" weak; b) tick "Lightness contrast super"; c) act on "luminance" and possibly on "chrominance" to approach the rendering of the polluted zone to that of the healthy zone; d) act moderately on "scope" to modulate the desired action.
|
||||
TP_LOCALLAB_CONTRAST;Contrast
|
||||
TP_LOCALLAB_CURV;Lightness - Contrast - Chrominance "Super"
|
||||
TP_LOCALLAB_CURVNONE;Disable curves
|
||||
TP_LOCALLAB_CURVCURR;Normal
|
||||
TP_LOCALLAB_CURVENH;Super
|
||||
TP_LOCALLAB_CURVENHSU;Combined HueChroma (experimental)
|
||||
TP_LOCALLAB_CURVENCONTRAST;Super+Contrast threshold (experimental)
|
||||
TP_LOCALLAB_CURVENSOB2;Combined HueChroma + Contrast threshold (experimental)
|
||||
TP_LOCALLAB_DARKRETI;Darkness
|
||||
TP_LOCALLAB_LIGHTRETI;Lightness
|
||||
TP_LOCALLAB_THRESRETI;Threshold
|
||||
TP_LOCALLAB_DEHAZ;Dehaze
|
||||
TP_LOCALLAB_EXPMETHOD_TOOLTIP;Standard : use an algorithm similar as main Exposure but in L*a*b* and taking account of deltaE.\n\nLaplacian & PDE : use another algorithm also with deltaE and with Poisson equation to solve Laplacian in Fourier space.\nPDE lead to very different results and needs differents settings that Standard\nMay be usefull for low exposure.\nPDE reduce artifacts and noise.
|
||||
TP_LOCALLAB_FFTW;Use Fast Fourier Transform
|
||||
TP_LOCALLAB_GRIDONE;Color Toning
|
||||
TP_LOCALLAB_GRIDTWO;Direct
|
||||
TP_LOCALLAB_LUM;Curves LC
|
||||
TP_LOCALLAB_LAPLACE;Laplacian threshold deltaE
|
||||
TP_LOCALLAB_LINEAR;Linearity
|
||||
TP_LOCALLAB_HLH;Curves H
|
||||
TP_LOCALLAB_EQUIL;Normalize Luminance
|
||||
TP_LOCALLAB_CHROMACBDL;Chroma
|
||||
TP_LOCALLAB_CHROMACB_TOOLTIP;Acts as an amplifier-reducer action compare to sliders of luminance.\nUnder 100 reduce, above 100 amplifie
|
||||
TP_LOCALLAB_CURVEEDITOR_TONES_TOOLTIP;L=f(L), can be used with L(H) in Color and Light
|
||||
TP_LOCALLAB_CURVEEDITOR_LL_TOOLTIP;To be active, you must check button 'Enable curves'
|
||||
TP_LOCALLAB_CURVEEDITOR_CC_TOOLTIP;If curves at the top, mask is completely black no transformation is made by the mask on the image.\nAs you go down the curve, the mask gradually more colorful and brilliant, the image is changing more and more
|
||||
TP_LOCALLAB_CURVEMETHOD_TOOLTIP;'Normal', the curve L=f(L) has the same algorithm than slider lightness.\n'Super' the curve L=f(L) has an new improved algorithm, which can leeds in some cases to artifacts.
|
||||
TP_LOCALLAB_EXCLUF;Excluding
|
||||
TP_LOCALLAB_EXCLUF_TOOLTIP;Can be used to exclude this part of datas - move Scope to extend color.\n You can apply all settings to this RT-spot.
|
||||
TP_LOCALLAB_LABGRID_VALUES;High(a)=%1 High(b)=%2\nLow(a)=%3 Low(b)=%4
|
||||
TP_LOCALLAB_LABGRID;Color correction grid
|
||||
TP_LOCALLAB_LEVELWAV_TOOLTIP;The Level is automatically adapted to the size of the spot and the preview.\nFrom level 8 size max 512 to level 1 size max = 4
|
||||
TP_LOCALLAB_SATUR;Saturation
|
||||
TP_LOCALLAB_SENSIDEN;Scope
|
||||
TP_LOCALLAB_SENSIEXCLU;Scope
|
||||
TP_LOCALLAB_SENSIEXCLU_TOOLTIP;Adjust color to include in exclusion!
|
||||
TP_LOCALLAB_STRUC;Structure
|
||||
TP_LOCALLAB_EXCLUTYPE;Spot method
|
||||
TP_LOCALLAB_EXCLUTYPE_TOOLTIP;Normal spot use recursive data.\nExcluding spot reinitialize data to origin.
|
||||
TP_LOCALLAB_EXNORM;Normal spot
|
||||
TP_LOCALLAB_EXECLU;Excluding spot
|
||||
TP_LOCALLAB_EXPOSE;Exposure
|
||||
TP_LOCALLAB_EXPOSURE_TOOLTIP;In some cases (strong shadows ..) you can use the module "Shadows Highlights"
|
||||
TP_LOCALLAB_EXPCHROMA;Chroma compensation
|
||||
TP_LOCALLAB_GUIDFILTER;Guided filter radius
|
||||
TP_LOCALLAB_GUIDFILTER_TOOLTIP;Adapt this values according to images - reduce if non misty images
|
||||
TP_LOCALLAB_LOC_CONTRAST;Local contrast
|
||||
TP_LOCALLAB_LAPLACEXP;Laplacian threshold
|
||||
TP_LOCALLAB_BALANEXP;PDE balance
|
||||
TP_LOCALLAB_REFLABEL;Ref. (0..1) Chroma=%1 Luma=%2 Hue=%3
|
||||
TP_LOCALLAB_NOISELUMFINE;Luminance fine 1 (Wav)
|
||||
TP_LOCALLAB_NOISELUMFINEZERO;Luminance fine 0 (Wav)
|
||||
TP_LOCALLAB_NOISELUMFINETWO;Luminance fine 2 (Wav)
|
||||
TP_LOCALLAB_NOISELUMCOARSE;Luminance coarse (Wav)
|
||||
TP_LOCALLAB_NOISELUMDETAIL;Luminance detail (DCT)
|
||||
TP_LOCALLAB_NOISELEQUAL;Equalizer white-black
|
||||
TP_LOCALLAB_NOISECHROFINE;Chroma fine (Wav)
|
||||
TP_LOCALLAB_NOISECHROCOARSE;Chroma coarse (Wav)
|
||||
TP_LOCALLAB_NOISECHRODETAIL;Chroma detail (DCT)
|
||||
TP_LOCALLAB_NOISECHROC_TOOLTIP;If superior to zero, high quality algorithm is enabled.\nCoarse is for slider >=2
|
||||
TP_LOCALLAB_PREVIEWSEL;Preview selection deltaE
|
||||
TP_LOCALLAB_PDEFRA;PDE
|
||||
TP_LOCALLAB_QUAL_METHOD;Global quality
|
||||
TP_LOCALLAB_QUALCURV_METHOD;Curves type
|
||||
TP_LOCALLAB_GAM;Gamma
|
||||
TP_LOCALLAB_ESTOP;Edge stopping
|
||||
TP_LOCALLAB_SCALTM;Scale
|
||||
TP_LOCALLAB_REWEI;Reweighting iterates
|
||||
TP_LOCALLAB_INDSL;Independent (mouse + sliders)
|
||||
TP_LOCALLAB_IND;Independent (mouse)
|
||||
TP_LOCALLAB_INVERS;Inverse
|
||||
TP_LOCALLAB_LABEL;Local Adjustements
|
||||
TP_LOCALLAB_STD;Standard
|
||||
TP_LOCALLAB_ENH;Enhanced
|
||||
TP_LOCALLAB_ENHDEN;Enhanced + chroma denoise
|
||||
TP_LOCALLAB_THRES;Threshold structure
|
||||
TP_LOCALLAB_PROXI;DeltaE weakening
|
||||
TP_LOCALLAB_THRESDELTAE;Threshold deltaE-scope
|
||||
TP_LOCALLAB_LIGHTNESS;Lightness
|
||||
TP_LOCALLAB_MASK;Mask:
|
||||
TP_LOCALLAB_METHOD_TOOLTIP;'Enhanced + chroma denoise' significantly increases processing times.\nBut reduce artifacts.
|
||||
TP_LOCALLAB_PDE;Laplacian & PDE
|
||||
TP_LOCALLAB_RADIUS;Radius
|
||||
TP_LOCALLAB_RADMASKCOL;Radius
|
||||
TP_LOCALLAB_RESID;Residual Image
|
||||
TP_LOCALLAB_CONTRESID;Contrast
|
||||
TP_LOCALLAB_RETI;Retinex - Strong local contrast
|
||||
TP_LOCALLAB_RETI_NEIGH_VART_TOOLTIP;Adapt these values according to images - if misty images and depending on whether you want to act on the front or the background
|
||||
TP_LOCALLAB_LC_FFTW_TOOLTIP;FFT improve quality and allow big radius.\nThe treatment time depends on the surface to be treated.\nTo be used preferably for large radius.\n\nDimensions can be reduced by a few pixels to optimize FFTW.
|
||||
TP_LOCALLAB_RETI_FFTW_TOOLTIP;FFT improve quality and allow big radius.\nThe treatment time depends on the surface to be treated.\nTo be used preferably for large radius.\n\nDimensions can be reduced by a few pixels to optimize FFTW.\nThis optimization is not possible if the 2 delimiters of the Spot (vertical or horizontal) are outside the image
|
||||
TP_LOCALLAB_TRANSMISSIONGAIN;Transmission gain
|
||||
TP_LOCALLAB_STREN;Compression Strength
|
||||
TP_LOCALLAB_STRGRID;Strength
|
||||
TP_LOCALLAB_SHADEX;Shadows
|
||||
TP_LOCALLAB_SHADEXCOMP;Shadows compression & tonal width
|
||||
TP_LOCALLAB_SHOWLAPLACE;Laplacian (first)
|
||||
TP_LOCALLAB_SHOWFOURIER;Fourier (dct)
|
||||
TP_LOCALLAB_SHOWPOISSON;Poisson (pde)
|
||||
TP_LOCALLAB_SHOWDCT;Show process Fourier
|
||||
TP_LOCALLAB_SHOWMASKSOFT_TOOLTIP;Show process Fourier:\nShows the different stages of the process.\nLaplace - builds the second derivative according to the threshold (first step).\nFourier -shows the transformed Laplacian with DCT.\nPoisson - show solution of Poisson DCE.\nNormalize - show result whithout normalization luminance.
|
||||
TP_LOCALLAB_SHOWNORMAL;Normalize luminance (no)
|
||||
TP_LOCALLAB_TM;Tone Mapping
|
||||
TP_LOCALLAB_STR;Strength
|
||||
TP_LOCALLAB_NEIGH;Radius
|
||||
TP_LOCALLAB_VART;Contrast (variance)
|
||||
TP_LOCALLAB_SENSI;Scope
|
||||
TP_LOCALLAB_SENSI_TOOLTIP;Adjust scope of action:\nSmall values limit action to colors very similar to those under the center spot.\nHigh values let the tool act upon a wider range of colors.\nValues smaller than 20 lead to a better algorithm.
|
||||
TP_LOCALLAB_SENSIH;Scope
|
||||
TP_LOCALLAB_SENSIH_TOOLTIP;Adjust scope of action:\nSmall values limit action to colors very similar to those under the center spot.\nHigh values let the tool act upon a wider range of colors.\nValues smaller than 20 lead to a better algorithm.
|
||||
TP_LOCALLAB_SHAPETYPE;Shape RT-spot area
|
||||
TP_LOCALLAB_SHAPE_TOOLTIP;Rectangle is only in normal mode.
|
||||
TP_LOCALLAB_ELI;Elipse
|
||||
TP_LOCALLAB_RECT;Rectangle
|
||||
TP_LOCALLAB_SHADOWHIGHLIGHT_TOOLTIP;Can be used instead - or in complement - of exposure module in difficult cases.\nThe use of Denoise may be necessary : lightening the shadows.\n\nCan be used as graduated filter (increase Scope)
|
||||
TP_LOCALLAB_SHARP;Sharpening
|
||||
TP_LOCALLAB_SHARRADIUS;Radius
|
||||
TP_LOCALLAB_SHARAMOUNT;Amount
|
||||
TP_LOCALLAB_SHARDAMPING;Damping
|
||||
TP_LOCALLAB_SHARITER;Iterations
|
||||
TP_LOCALLAB_SHARBLUR;Blur radius
|
||||
TP_LOCALLAB_SENSIS;Scope
|
||||
TP_LOCALLAB_SENSICB;Scope
|
||||
TP_LOCALLAB_SENSIBN;Scope
|
||||
TP_LOCALLAB_SENSIS_TOOLTIP;Adjust scope of action:\nSmall values limit action to colors very similar to those under the center spot.\nHigh values let the tool act upon a wider range of colors.\nValues smaller than 20 lead to a better algorithm.
|
||||
TP_LOCALLAB_SETTINGS;Settings
|
||||
TP_LOCALLAB_ENABLE_MASK;Enable mask
|
||||
TP_LOCALLAB_SHOW;Mask and modifications
|
||||
TP_LOCALLAB_SHOWMASKCOL_TOOLTIP;Display modifications.\nBeware, you can only view one modification (color and light or Exposure or Shadows-Highlight or TM or CBDL or Retinex MSR).\nYou must put 'Display modification' to 'none' or 'Usemask' to enabled the other show.\n\nUse Mask is before algorihtm shape detection
|
||||
TP_LOCALLAB_SHOWMNONE;None
|
||||
TP_LOCALLAB_SHOWMODIF;Show modifications whithout mask
|
||||
TP_LOCALLAB_SHOWMODIFMASK;Show modifications whith mask
|
||||
TP_LOCALLAB_SHOWMASK;Show mask
|
||||
TP_LOCALLAB_SHOWSTRUC;Show structure
|
||||
TP_LOCALLAB_USEMASK;Use mask
|
||||
TP_LOCALLAB_SHADHIGH;Shadows Highlights - Gradient
|
||||
TP_LOCALLAB_SOFTRADIUSCOL;Soft radius
|
||||
TP_LOCALLAB_SOFT;Soft Light and Original Retinex
|
||||
TP_LOCALLAB_SOFTMETHOD_TOOLTIP;Original Retinex is very different from others Retinex method.\nIts acts on grey and balance luminance.
|
||||
TP_LOCALLAB_SOFTM;Soft Light
|
||||
TP_LOCALLAB_RETIM;Original Retinex
|
||||
TP_LOCALLAB_STRENG;Strength
|
||||
TP_LOCALLAB_STRENGTH;Noise
|
||||
TP_LOCALLAB_STRUCCOL;Structure
|
||||
TP_LOCALLAB_STYPE;Shape method
|
||||
TP_LOCALLAB_STYPE_TOOLTIP;You can choose between:\nSymmetrical - left handle linked to right, top handle linked to bottom.\nIndependent - all handles are independent.
|
||||
TP_LOCALLAB_SYMSL;Symmetrical (mouse + sliders)
|
||||
TP_LOCALLAB_SYM;Symmetrical (mouse)
|
||||
TP_LOCALLAB_WAVE;Wavelet
|
||||
TP_LOCALLAB_LOCCONT;Unsharp Mask
|
||||
TP_LOCALLAB_WAV;Levels local contrast
|
||||
TP_LOCALLAB_LEVELWAV;Wavelets Levels
|
||||
TP_LOCALLAB_RESIDCONT;Residual image contrast
|
||||
TP_LOCALLAB_CURVEEDITOR_TONES_LABEL;Tone curve
|
||||
TP_LOCALLAB_TM_MASK;Use transmission map
|
||||
TP_LOCALLAB_TRANSIT;Transition Gradient
|
||||
TP_LOCALLAB_TRANSIT_TOOLTIP;Adjust smoothness of transition between affected and unaffected areas.
|
||||
TP_LOCALLAB_TRANSITVALUE;Transition value
|
||||
TP_LOCALLAB_TRANSITGRAD;Transition differentiation XY
|
||||
TP_LOCALLAB_TRANSITGRAD_TOOLTIP;Changes the transition of the abscissa to that of the ordinate
|
||||
TP_LOCALLAB_TRANSITWEAK;Transition weakening
|
||||
TP_LOCALLAB_TRANSITWEAK_TOOLTIP;Adjust weakening : change smoothness process - 1 linear - 2 parabolic - 3 cubic
|
||||
TP_LOCALLAB_TONEMAP_TOOLTIP;Tone Mapping - main menu must be disabled
|
||||
TP_LOCALLAB_TONEMAPESTOP_TOOLTIP;Increase Edge stopping - or Reweighting iterates, increase processing time - but increases the effects
|
||||
TP_LOCALLAB_VIBRANCE;Vibrance
|
||||
TP_LOCALLAB_WARM;Warm - Cool & Color artifacts
|
||||
TP_LOCALLAB_WARM_TOOLTIP;This slider use Ciecam algorithm and acts as White Balance, it can warm or cool the area selected.\nIt can also in some cases reduce color artifacts.
|
||||
TP_LOCALLAB_SPOTNAME;New Spot
|
||||
TP_LOCALLAB_BLUFR;Smooth - Blur - Grain - Denoise
|
||||
TP_LOCALLAB_BLUMETHOD_TOOLTIP;To blur the background and isolate the foreground:\n*Blur the background by a RT-spot fully covering the image (high values for scope and transition) - normal or inverse.\n*Isolate the foreground by one or more excluding RT-spot with the tools you want (increse scope), you can use a mask to enhance and amplify the effects.\n\nThis module can be used in additional noise reduction,including "median" and "Guided filter"
|
||||
@@ -2739,6 +2560,7 @@ TP_LOCALLAB_OPACOL;Opacity
|
||||
TP_LOCALLAB_ORIGLC;Merge only with original image
|
||||
TP_LOCALLAB_PASTELS2;Vibrance
|
||||
TP_LOCALLAB_PDE;Dynamic Range compression + Standard ƒ
|
||||
TP_LOCALLAB_PDE2;ΔØ Laplacian PDE - Dynamic Range compression + Standard
|
||||
TP_LOCALLAB_PDEFRA;PDE IPOL - Contrast attenuator ƒ
|
||||
TP_LOCALLAB_PDEFRAME_TOOLTIP;PDE IPOL - personal algorithm adapted from IPOL to Rawtherapee: lead to very different results and needs differents settings that Standard (negative black, gamma < 1,...)\nMay be usefull for low exposure.\n
|
||||
TP_LOCALLAB_PREVIEWSEL;Preview selection ΔE
|
||||
|
||||
Reference in New Issue
Block a user