diff --git a/CMakeLists.txt b/CMakeLists.txt
index 58c87512d..8f48ac6f4 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -289,13 +289,24 @@ endif()
# Check for libraries:
find_package(PkgConfig)
+
if(WIN32)
-pkg_check_modules (GTK REQUIRED gtk+-3.0>=3.22.24)
-pkg_check_modules (GTKMM REQUIRED gtkmm-3.0>=3.22)
+ pkg_check_modules (GTK REQUIRED gtk+-3.0>=3.22.24)
+ pkg_check_modules (GTKMM REQUIRED gtkmm-3.0>=3.22)
else()
-pkg_check_modules (GTK REQUIRED gtk+-3.0>=3.16)
-pkg_check_modules (GTKMM REQUIRED gtkmm-3.0>=3.16)
+ pkg_check_modules (GTK REQUIRED gtk+-3.0>=3.16)
+ pkg_check_modules (GTKMM REQUIRED gtkmm-3.0>=3.16)
endif()
+
+if(GTK_VERSION VERSION_GREATER "3.24.1" AND GTK_VERSION VERSION_LESS "3.24.7")
+ if(GTK_VERSION VERSION_EQUAL "3.24.5")
+ set(CERTAINTY "known to")
+ else()
+ set(CERTAINTY "likely to")
+ endif()
+ message(WARNING "\nWarning! You are using GTK+ version " ${GTK_VERSION} " which is " ${CERTAINTY} " have an issue where combobox menu scroll-arrows are missing when a Gtk::ComboBox list does not fit vertically on the screen. As a result, users of your build will not be able to select items in the following comboboxes: Processing Profiles, Film Simulation, and the camera and lens profiles in Profiled Lens Correction.\nIt is recommended that you either downgrade GTK+ to <= 3.24.1 or upgrade to >= 3.24.7.")
+endif()
+
pkg_check_modules (GLIB2 REQUIRED glib-2.0>=2.44)
pkg_check_modules (GLIBMM REQUIRED glibmm-2.4>=2.44)
pkg_check_modules (CAIROMM REQUIRED cairomm-1.0)
@@ -331,7 +342,6 @@ if(WITH_SYSTEM_KLT)
find_package(KLT REQUIRED)
endif()
-
# Check for libcanberra-gtk3 (sound events on Linux):
if(UNIX AND(NOT APPLE))
pkg_check_modules(CANBERRA-GTK REQUIRED libcanberra-gtk3)
@@ -410,7 +420,6 @@ int main()
endif()
endif()
-
# Find out whether we are building out of source:
get_filename_component(ABS_SOURCE_DIR "${PROJECT_SOURCE_DIR}" ABSOLUTE)
get_filename_component(ABS_BINARY_DIR "${CMAKE_BINARY_DIR}" ABSOLUTE)
diff --git a/rtdata/dcpprofiles/camera_model_aliases.json b/rtdata/dcpprofiles/camera_model_aliases.json
index 0caf5804b..61fc2bf57 100644
--- a/rtdata/dcpprofiles/camera_model_aliases.json
+++ b/rtdata/dcpprofiles/camera_model_aliases.json
@@ -23,11 +23,13 @@
"NIKON D800E": ["NIKON D800"],
"Panasonic DC-FZ82": ["Panasonic DMC-FZ80", "Panasonic DMC-FZ85"],
+ "Panasonic DC-GF9": ["Panasonic DC-GX800", "Panasonic DC-GX850"],
+ "Panasonic DC-TZ100": ["Panasonic DC-ZS100", "Panasonic DC-ZS110", "Panasonic DC-TZ101", "Panasonic DC-TZ110"],
"Panasonic DC-TZ91": ["Panasonic DC-TZ90", "Panasonic DC-TZ92", "Panasonic DC-TZ93", "Panasonic DC-ZS70"],
+ "Panasonic DMC-G7": ["Panasonic DMC-G70"],
"Panasonic DMC-G8": ["Panasonic DMC-G80", "Panasonic DMC-G81", "Panasonic DMC-G85"],
"Panasonic DMC-GX85": ["Panasonic DMC-GX80", "Panasonic DMC-GX7MK2"],
"Panasonic DMC-LX15": ["Panasonic DMC-LX9", "Panasonic DMC-LX10"],
- "Panasonic DC-TZ100": ["Panasonic DC-ZS100", "Panasonic DC-ZS110", "Panasonic DC-TZ101", "Panasonic DC-TZ110"],
"Panasonic DMC-TZ61": ["Panasonic DMC-TZ60", "Panasonic DMC-ZS40"],
"Panasonic DMC-TZ71": ["Panasonic DMC-TZ70", "Panasonic DMC-ZS50"],
"Panasonic DMC-TZ81": ["Panasonic DMC-TZ80", "Panasonic DMC-TZ85", "Panasonic DMC-ZS60"]
diff --git a/rtdata/languages/Catala b/rtdata/languages/Catala
index 25929af74..97ffe7e9d 100644
--- a/rtdata/languages/Catala
+++ b/rtdata/languages/Catala
@@ -67,7 +67,6 @@ EXPORT_BYPASS_RAW_LINENOISE;Salta [raw] línia de filtre de soroll
EXPORT_BYPASS_SHARPENEDGE;Salta afinar vores
EXPORT_BYPASS_SHARPENING;Salta reenfocar
EXPORT_BYPASS_SHARPENMICRO;Salta microcontrast
-EXPORT_BYPASS_SH_HQ;Salta ombres/clars intensos (alta qualitat)
EXPORT_FASTEXPORTOPTIONS;Opcions d'exportació ràpida
EXPORT_INSTRUCTIONS;Les opcions d'exportació ràpida permeten estalviar temps i recursos obviant els ajustos establerts de desenvolupament i processar la cua amb més celeritat. Es recomana aquest mètode per a una ràpida generació d'imatges de baixa resolució quan cal prioritzar la rapidesa o en canvis de tamany d'una o diverses imatges sense modificar els seus paràmetres de desenvolupament desats.
EXPORT_MAXHEIGHT;Alçada màxima:
@@ -76,7 +75,6 @@ EXPORT_PUTTOQUEUEFAST; Posa a la cua per a export. ràpida
EXPORT_RAW_DMETHOD;Mètode de demosaicar
EXTPROGTARGET_1;raw
EXTPROGTARGET_2;cua processada
-FILEBROWSER_ADDDELTEMPLATE;Afeg/Treu plantilles...
FILEBROWSER_APPLYPROFILE;Aplica
FILEBROWSER_APPLYPROFILE_PARTIAL;Aplica - parcial
FILEBROWSER_AUTODARKFRAME;Auto marc fosc
@@ -168,7 +166,6 @@ GENERAL_UNCHANGED;(No canviat)
GENERAL_WARNING;Avís
HISTOGRAM_TOOLTIP_B;Mostra/amaga l'histograma BLAU
HISTOGRAM_TOOLTIP_BAR;Mostra/amaga la barra indicadora RGB\nClic botó dret a la previsualització per a congelar/descongelar
-HISTOGRAM_TOOLTIP_FULL;Canvia entre histograma complet o escalat
HISTOGRAM_TOOLTIP_G;Mostra/amaga l'histograma VERD
HISTOGRAM_TOOLTIP_L;Mostra/amaga l'histograma de luminància CIELAB
HISTOGRAM_TOOLTIP_R;Mostra/amaga l'histograma VERMELL
@@ -532,7 +529,6 @@ PREFERENCES_MENUGROUPLABEL;Grup "Etiqueta de color"
PREFERENCES_MENUGROUPPROFILEOPERATIONS;Grup "Operacions de procés de perfils"
PREFERENCES_MENUGROUPRANK;Grup "Rang"
PREFERENCES_MENUOPTIONS;Opcions del menú
-PREFERENCES_METADATA;Metadata
PREFERENCES_MULTITAB;Mode multitreball
PREFERENCES_MULTITABDUALMON;Mode multitreball en segon monitor, si se'n té un
PREFERENCES_OUTDIR;Directori de sortida
@@ -607,7 +603,6 @@ QINFO_NOEXIF;No hi ha dades Exif.
SAVEDLG_AUTOSUFFIX;Afegeix automàticament un sufix si el fitxer ja hi és
SAVEDLG_FILEFORMAT;Format del fitxer
SAVEDLG_JPEGQUAL;Qualitat JPEG
-SAVEDLG_PNGCOMPR;Compressió PNG
SAVEDLG_PUTTOQUEUE;Posa a la cua de procés
SAVEDLG_PUTTOQUEUEHEAD;Posa al principi de la cua de procés
SAVEDLG_PUTTOQUEUETAIL;Posa a la fi de la cua de procés
@@ -664,7 +659,6 @@ TP_DEFRINGE_THRESHOLD;Llindar
TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Crominància
TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Detall de luminància
TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminància
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_LABEL;Reducció de soroll (només imatges raw)
TP_DIRPYRDENOISE_MAIN_GAMMA;Gama
TP_DIRPYREQUALIZER_LABEL;Contrast per grau de detall
TP_DIRPYREQUALIZER_LUMACOARSEST;Més bast
@@ -710,10 +704,6 @@ TP_FLATFIELD_BT_HORIZONTAL;Horitzontal
TP_FLATFIELD_BT_VERTHORIZ;Vert. + Horitz.
TP_FLATFIELD_BT_VERTICAL;Vertical
TP_FLATFIELD_LABEL;Camp pla
-TP_GAMMA_CURV;gama
-TP_GAMMA_FREE;Lliure gama
-TP_GAMMA_OUTPUT;Sortida gama
-TP_GAMMA_SLOP;Inclinació (linear)
TP_HLREC_BLEND;Barreja
TP_HLREC_CIELAB;Superposició CIELab
TP_HLREC_COLOR;Propagació de color
@@ -725,8 +715,6 @@ TP_HSVEQUALIZER_HUE;H
TP_HSVEQUALIZER_LABEL;HSV Equalitzador
TP_HSVEQUALIZER_SAT;S
TP_HSVEQUALIZER_VAL;V
-TP_ICM_BLENDCMSMATRIX;Barreja clars intensos del perfil de color amb la matriu
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Habilita la recuperació de clars intensos quan s'usen els perfils ICC basats en LUT
TP_ICM_INPUTCAMERA;Propi de la càmera
TP_ICM_INPUTCAMERAICC;Perfil de color del model de càmera detectada.
TP_ICM_INPUTCAMERAICC_TOOLTIP;Usa d'entrada el perfil de color DCP o ICC específic de càmera de RawTherapee. Aquests perfils són més precisos que els de simple matriu. Disponible per a algunes càmeres. Aquests perfils són als directoris /iccprofiles/input i /dcpprofiles i es carreguen automàticament segons un nom de fitxer que coincideix exactament amb el nom de model de la càmera.
@@ -824,7 +812,6 @@ TP_ROTATE_SELECTLINE;Selecc. línia recta
TP_SHADOWSHLIGHTS_HIGHLIGHTS;Clars intensos
TP_SHADOWSHLIGHTS_HLTONALW;Amplada de to per Clars I.
TP_SHADOWSHLIGHTS_LABEL;Foscos/Clars intensos
-TP_SHADOWSHLIGHTS_LOCALCONTR;Contrast local
TP_SHADOWSHLIGHTS_RADIUS;Radi
TP_SHADOWSHLIGHTS_SHADOWS;Foscos
TP_SHADOWSHLIGHTS_SHTONALW;Amplada de to per Foscos
@@ -1494,7 +1481,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: -
!PREFERENCES_BEHADDALLHINT;Set all parameters to the Add mode.\nAdjustments of parameters in the batch tool panel will be deltas to the stored values.
!PREFERENCES_BEHSETALL;All to 'Set'
!PREFERENCES_BEHSETALLHINT;Set all parameters to the Set mode.\nAdjustments of parameters in the batch tool panel will be absolute, the actual values will be displayed.
-!PREFERENCES_BLACKBODY;Tungsten
!PREFERENCES_CACHECLEAR;Clear
!PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
!PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
@@ -1524,34 +1510,12 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: -
!PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys format
!PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
!PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
-!PREFERENCES_D50;Settings in main menu
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_D55;5500K
-!PREFERENCES_D60;6000K
-!PREFERENCES_D65;6500K
!PREFERENCES_DIRECTORIES;Directories
!PREFERENCES_EDITORCMDLINE;Custom command line
!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_FLUOF2;Fluorescent F2
-!PREFERENCES_FLUOF7;Fluorescent F7
-!PREFERENCES_FLUOF11;Fluorescent F11
!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY;Output device's Yb luminance (%)
-!PREFERENCES_GREY05;Yb=05 CIE L#30
-!PREFERENCES_GREY10;Yb=10 CIE L#40
-!PREFERENCES_GREY15;Yb=15 CIE L#45
-!PREFERENCES_GREY18;Settings in main menu
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREY23;Yb=23 CIE L#55
-!PREFERENCES_GREY30;Yb=30 CIE L#60
-!PREFERENCES_GREY40;Yb=40 CIE L#70
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
!PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
!PREFERENCES_INSPECT_LABEL;Inspect
!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
@@ -1592,9 +1556,7 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: -
!PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
!PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
!PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-!PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
!PROFILEPANEL_GLOBALPROFILES;Bundled profiles
!PROFILEPANEL_MODE_TIP;Processing profile fill mode.\n\nButton pressed: partial profiles will be converted to full profiles; the missing values will be replaced with hard-coded defaults.\n\nButton released: profiles will be applied as they are, altering only those values which they contain.
!PROFILEPANEL_MYPROFILES;My profiles
@@ -1742,8 +1704,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: -
!TP_COLORAPP_SURROUND_DIM;Dim
!TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
!TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\nAverage: Average light environment (standard). The image will not change.\n\nDim: Dim environment (TV). The image will become slighty dark.\n\nDark: Dark environment (projector). The image will become more dark.\n\nExtremly Dark: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
!TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
!TP_COLORAPP_TCMODE_CHROMA;Chroma
!TP_COLORAPP_TCMODE_COLORF;Colorfulness
@@ -1827,7 +1787,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: -
!TP_DEHAZE_STRENGTH;Strength
!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
!TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
@@ -1844,8 +1803,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: -
!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= - High= -
!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2 Ty=%3
!TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
!TP_DIRPYRDENOISE_LABEL;Noise Reduction
!TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
!TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
@@ -1871,7 +1828,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: -
!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
!TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
!TP_DIRPYRDENOISE_TYPE_3X3;3×3
!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
!TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1987,7 +1943,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: -
!TP_RAWCACORR_AUTOIT;Iterations
!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CASTR;Strength
!TP_RAWEXPOS_BLACK_0;Green 1 (lead)
!TP_RAWEXPOS_BLACK_1;Red
!TP_RAWEXPOS_BLACK_2;Blue
@@ -2038,15 +1993,12 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: -
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
!TP_RAW_PIXELSHIFTMM_OFF;Off
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -2081,7 +2033,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: -
!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
!TP_RETINEX_GAINTRANSMISSION;Gain transmission
!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
!TP_RETINEX_GAMMA;Gamma
!TP_RETINEX_GAMMA_FREE;Free
!TP_RETINEX_GAMMA_HIGH;High
@@ -2148,7 +2099,6 @@ ZOOMPANEL_ZOOMOUT;Allunya\nDrecera: -
!TP_RGBCURVES_LUMAMODE;Luminosity mode
!TP_RGBCURVES_LUMAMODE_TOOLTIP;Luminosity mode allows to vary the contribution of R, G and B channels to the luminosity of the image, without altering image color.
!TP_SAVEDIALOG_OK_TIP;Shortcut: Ctrl-Enter
-!TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
!TP_SHARPENING_BLUR;Blur radius
!TP_SHARPENING_CONTRAST;Contrast threshold
!TP_SHARPENMICRO_CONTRAST;Contrast threshold
diff --git a/rtdata/languages/Chinese (Simplified) b/rtdata/languages/Chinese (Simplified)
index f3b70fc25..bfbc8f607 100644
--- a/rtdata/languages/Chinese (Simplified)
+++ b/rtdata/languages/Chinese (Simplified)
@@ -88,7 +88,6 @@ EXPORT_PUTTOQUEUEFAST; 放入快速导出序列
EXPORT_RAW_DMETHOD;反拜尔算法
EXTPROGTARGET_1;raw
EXTPROGTARGET_2;队列已处理
-FILEBROWSER_ADDDELTEMPLATE;增加/删除模板...
FILEBROWSER_APPLYPROFILE;应用配置
FILEBROWSER_APPLYPROFILE_PARTIAL;应用 - 局部
FILEBROWSER_AUTODARKFRAME;自动暗场
@@ -387,8 +386,6 @@ MAIN_TAB_RAW;Raw
MAIN_TAB_RAW_TOOLTIP;快捷键：Alt-R
MAIN_TAB_TRANSFORM;变换
MAIN_TAB_TRANSFORM_TOOLTIP;快捷键：Alt-t
-MAIN_TAB_WAVELET;小波变换
-MAIN_TAB_WAVELET_TOOLTIP;快捷键：Alt-w
MAIN_TOOLTIP_HIDEHP;显示/隐藏左面板 (包含历史, 快捷键: H)
MAIN_TOOLTIP_INDCLIPPEDH;高光溢出提示
MAIN_TOOLTIP_INDCLIPPEDS;阴影不足提示
@@ -479,7 +476,6 @@ PARTIALPASTE_SHARPENING;锐化
PARTIALPASTE_SHARPENMICRO;微处对比
PARTIALPASTE_VIBRANCE;鲜艳度
PARTIALPASTE_VIGNETTING;暗角修正
-PARTIALPASTE_WAVELETGROUP;小波变换等级
PARTIALPASTE_WHITEBALANCE;白平衡
PREFERENCES_ADD;添加
PREFERENCES_APPEARANCE_NAVGUIDECOLOR;导航器引导颜色
@@ -489,7 +485,6 @@ PREFERENCES_BATCH_PROCESSING;批处理
PREFERENCES_BEHADDALL;全 '添加'
PREFERENCES_BEHAVIOR;行为
PREFERENCES_BEHSETALL;全 '设定'
-PREFERENCES_BLACKBODY;钨丝灯
PREFERENCES_CACHEMAXENTRIES;最大缓存数量
PREFERENCES_CACHEOPTS;缓存选项
PREFERENCES_CACHETHUMBHEIGHT;最大缩略图高度
@@ -508,11 +503,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys format
PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
PREFERENCES_CUSTPROFBUILDPATH;可执行文件路径
-PREFERENCES_D50;5000K
-PREFERENCES_D50_OLD;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
PREFERENCES_DARKFRAMEFOUND;找到
PREFERENCES_DARKFRAMESHOTS;张
PREFERENCES_DARKFRAMETEMPLATES;模板
@@ -532,32 +522,15 @@ PREFERENCES_FLATFIELDFOUND;找到
PREFERENCES_FLATFIELDSDIR;平场图像路径
PREFERENCES_FLATFIELDSHOTS;张
PREFERENCES_FLATFIELDTEMPLATES;模板
-PREFERENCES_FLUOF2;Fluorescent F2
-PREFERENCES_FLUOF7;Fluorescent F7
-PREFERENCES_FLUOF11;Fluorescent F11
PREFERENCES_FORIMAGE;用于图片文件
PREFERENCES_FORRAW;用于Raw文件
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
PREFERENCES_GIMPPATH;GIMP安装文件夹
-PREFERENCES_GREY;Output device's Yb luminance (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Settings in main menu
-PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;Scene Yb luminance (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;自动
PREFERENCES_HISTOGRAMPOSITIONLEFT;直方图放置在左面板
-PREFERENCES_HISTOGRAMWORKING;使用工作色彩空间显示直方图和导航器
PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
PREFERENCES_HLTHRESHOLD;高光溢出阈值
PREFERENCES_ICCDIR;ICC配置路径
-PREFERENCES_IMG_RELOAD_NEEDED;这些改变需要重载图片生效
PREFERENCES_IMPROCPARAMS;默认图片处理参数
PREFERENCES_INSPECT_LABEL;检阅
PREFERENCES_INSPECT_MAXBUFFERS_LABEL;最大缓存图片数
@@ -576,7 +549,6 @@ PREFERENCES_MENUGROUPLABEL;Group "Color label"
PREFERENCES_MENUGROUPPROFILEOPERATIONS;Group "Processing profile operations"
PREFERENCES_MENUGROUPRANK;组 "评价"
PREFERENCES_MENUOPTIONS;子菜单选项
-PREFERENCES_METADATA;元数据
PREFERENCES_MONINTENT;默认渲染意图
PREFERENCES_MONITOR;显示器
PREFERENCES_MONPROFILE;默认色彩配置文件
@@ -644,9 +616,7 @@ PREFERENCES_TAB_IMPROC;图片处理
PREFERENCES_TAB_SOUND;音效
PREFERENCES_TP_LABEL;工具栏
PREFERENCES_TP_VSCROLLBAR;隐藏垂直滚动栏
-PREFERENCES_TUNNELMETADATA;无损复制 Exif/IPTC/XMP 到输出文件
PREFERENCES_USEBUNDLEDPROFILES;启用内置预设
-PREFERENCES_VIEW;输出设备白平衡 (显示器、电视、投影仪等)
PREFERENCES_WORKFLOW;排版
PROFILEPANEL_LABEL;处理参数配置
PROFILEPANEL_LOADDLGLABEL;加载处理参数为...
@@ -676,7 +646,6 @@ SAVEDLG_AUTOSUFFIX;自动加后缀到已经存在的文件
SAVEDLG_FILEFORMAT;文件格式
SAVEDLG_FORCEFORMATOPTS;强制保存选项
SAVEDLG_JPEGQUAL;JPEG质量
-SAVEDLG_PNGCOMPR;PNG压缩
SAVEDLG_PUTTOQUEUE;放入队列
SAVEDLG_PUTTOQUEUEHEAD;放在处理序列首位
SAVEDLG_PUTTOQUEUETAIL;放在处理序列末位
@@ -766,7 +735,6 @@ TP_DEFRINGE_LABEL;去色彩边缘(紫边)
TP_DEFRINGE_RADIUS;半径
TP_DIRPYRDENOISE_LUMINANCE_DETAIL;明亮度细节
TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;光亮度/发光度
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_LABEL;降噪
TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
TP_DIRPYREQUALIZER_ALGO;皮肤色彩范围
TP_DIRPYREQUALIZER_ARTIF;减少杂色
@@ -813,10 +781,6 @@ TP_FLATFIELD_BT_HORIZONTAL;水平
TP_FLATFIELD_BT_VERTHORIZ;垂直 + 水平
TP_FLATFIELD_BT_VERTICAL;垂直
TP_FLATFIELD_LABEL;平场
-TP_GAMMA_CURV;伽马
-TP_GAMMA_FREE;自定义伽马
-TP_GAMMA_OUTPUT;导出伽马
-TP_GAMMA_SLOP;斜率 (线性)
TP_GRADIENT_CENTER;中心
TP_GRADIENT_CENTER_X;中心 X
TP_GRADIENT_CENTER_Y;中心 Y
@@ -904,10 +868,8 @@ TP_SAVEDIALOG_OK_TIP;快捷键: Ctrl-Enter
TP_SHADOWSHLIGHTS_HIGHLIGHTS;高光
TP_SHADOWSHLIGHTS_HLTONALW;影调范围
TP_SHADOWSHLIGHTS_LABEL;阴影/高光
-TP_SHADOWSHLIGHTS_LOCALCONTR;局部对比度
TP_SHADOWSHLIGHTS_RADIUS;半径
TP_SHADOWSHLIGHTS_SHADOWS;阴影
-TP_SHADOWSHLIGHTS_SHARPMASK;锐度蒙板
TP_SHADOWSHLIGHTS_SHTONALW;影调范围
TP_SHARPENEDGE_AMOUNT;数量
TP_SHARPENEDGE_LABEL;边缘
@@ -990,7 +952,6 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: -
!EXPORT_BYPASS_RAW_DCB_ENHANCE;Bypass [raw] DCB Enhancement Steps
!EXPORT_BYPASS_RAW_DCB_ITERATIONS;Bypass [raw] DCB Iterations
!EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Bypass [raw] LMMSE Enhancement Steps
-!EXPORT_BYPASS_SH_HQ;Bypass Sharp Mask Shadows/Highlights
!EXPORT_INSTRUCTIONS;Fast Export options provide overrides to bypass time and resource consuming development settings and to run queue processing using the fast export settings instead. This method is recommended for quicker generation of lower resolution images when speed is a priority or when resized output is desired for one or many images without making modifications to their saved development parameters.
!EXPORT_PIPELINE;Processing pipeline
!EXPORT_USE_FAST_PIPELINE;Dedicated (full processing on resized image)
@@ -1694,8 +1655,6 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: -
!TP_COLORAPP_SURROUND;Surround
!TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
!TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\nAverage: Average light environment (standard). The image will not change.\n\nDim: Dim environment (TV). The image will become slighty dark.\n\nDark: Dark environment (projector). The image will become more dark.\n\nExtremly Dark: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
!TP_COLORAPP_TCMODE_CHROMA;Chroma
!TP_COLORAPP_TCMODE_COLORF;Colorfulness
!TP_COLORAPP_TCMODE_LABEL1;Curve mode 1
@@ -1774,7 +1733,6 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: -
!TP_DEHAZE_STRENGTH;Strength
!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
!TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
@@ -1792,8 +1750,6 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: -
!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= - High= -
!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2 Ty=%3
!TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
!TP_DIRPYRDENOISE_LABEL;Noise Reduction
!TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
!TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
@@ -1819,7 +1775,6 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: -
!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
!TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
!TP_DIRPYRDENOISE_TYPE_3X3;3×3
!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
!TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1860,8 +1815,6 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: -
!TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
!TP_ICM_APPLYLOOKTABLE;Look table
!TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-!TP_ICM_BLENDCMSMATRIX;Blend ICC highlights with matrix
-!TP_ICM_BLENDCMSMATRIX_TOOLTIP;Enable to recover clipped highlights when using LUT-based ICC profiles.
!TP_ICM_BPC;Black Point Compensation
!TP_ICM_DCPILLUMINANT;Illuminant
!TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
@@ -1952,7 +1905,6 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: -
!TP_RAWCACORR_AUTOIT;Iterations
!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CASTR;Strength
!TP_RAWEXPOS_BLACKS;Black Levels
!TP_RAWEXPOS_BLACK_0;Green 1 (lead)
!TP_RAWEXPOS_BLACK_1;Red
@@ -2011,15 +1963,12 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: -
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
!TP_RAW_PIXELSHIFTMM_OFF;Off
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -2055,7 +2004,6 @@ ZOOMPANEL_ZOOMOUT;缩放拉远\n快捷键: -
!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
!TP_RETINEX_GAINTRANSMISSION;Gain transmission
!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
!TP_RETINEX_GAMMA;Gamma
!TP_RETINEX_GAMMA_FREE;Free
!TP_RETINEX_GAMMA_HIGH;High
diff --git a/rtdata/languages/Chinese (Traditional) b/rtdata/languages/Chinese (Traditional)
deleted file mode 100644
index 513866a74..000000000
--- a/rtdata/languages/Chinese (Traditional)
+++ /dev/null
@@ -1,2330 +0,0 @@
-#00 Chinese (Traditional)
-#01 2008-07-29 Mingjui Liao
-
-BATCHQUEUE_AUTOSTART;Auto start
-BATCHQUEUE_AUTOSTARTHINT;Start processing automatically when a new job arrives
-CURVEEDITOR_LINEAR;線性
-CURVEEDITOR_LOADDLGLABEL;正載入曲線...
-CURVEEDITOR_SAVEDLGLABEL;正儲存曲線...
-CURVEEDITOR_TOOLTIPLINEAR;重置曲線
-CURVEEDITOR_TOOLTIPLOAD;載入曲線
-CURVEEDITOR_TOOLTIPSAVE;儲存曲線
-DIRBROWSER_FOLDERS;文件夾
-EXIFFILTER_APERTURE;Aperture
-EXIFFILTER_CAMERA;Camera
-EXIFFILTER_FOCALLEN;Focal Length
-EXIFFILTER_ISO;ISO
-EXIFFILTER_LENS;Lens
-EXIFFILTER_SHUTTER;Shutter
-EXIFPANEL_ADDEDIT;Add/Edit
-EXIFPANEL_ADDEDITHINT;Add new tag or edit tag
-EXIFPANEL_ADDTAGDLG_ENTERVALUE;Enter value
-EXIFPANEL_ADDTAGDLG_SELECTTAG;Select tag
-EXIFPANEL_ADDTAGDLG_TITLE;Add/Edit Tag
-EXIFPANEL_KEEP;Keep
-EXIFPANEL_KEEPHINT;Keep the selected tags when writing output file
-EXIFPANEL_REMOVE;Remove
-EXIFPANEL_REMOVEHINT;Remove the selected tags when writing output file
-EXIFPANEL_RESET;Reset
-EXIFPANEL_RESETALL;Reset All
-EXIFPANEL_RESETALLHINT;Reset all tags to their original values
-EXIFPANEL_RESETHINT;Reset the selected tags to their original values
-EXIFPANEL_SUBDIRECTORY;Subdirectory
-FILEBROWSER_APPLYPROFILE;Apply profile
-FILEBROWSER_CLEARPROFILE;Clear profile
-FILEBROWSER_COPYPROFILE;Copy profile
-FILEBROWSER_DELETEDLGLABEL;File delete confirmation
-FILEBROWSER_DELETEDLGMSG;Are you sure you want to delete the selected %1 files?
-FILEBROWSER_EMPTYTRASH;Empty Trash
-FILEBROWSER_EMPTYTRASHHINT;Permanently delete the files of the trash
-FILEBROWSER_PARTIALPASTEPROFILE;Partial paste
-FILEBROWSER_PASTEPROFILE;Paste profile
-FILEBROWSER_POPUPCANCELJOB;Cancel job
-FILEBROWSER_POPUPMOVEEND;Move to end of queue
-FILEBROWSER_POPUPMOVEHEAD;Move to head of queue
-FILEBROWSER_POPUPOPEN;Open
-FILEBROWSER_POPUPOPENINEDITOR;Open in Editor
-FILEBROWSER_POPUPPROCESS;Put to processing queue
-FILEBROWSER_POPUPREMOVE;Remove from filesystem
-FILEBROWSER_POPUPRENAME;Rename
-FILEBROWSER_POPUPSELECTALL;Select all
-FILEBROWSER_POPUPTRASH;Move to trash
-FILEBROWSER_POPUPUNRANK;Unrank
-FILEBROWSER_POPUPUNTRASH;Remove from trash
-FILEBROWSER_RENAMEDLGLABEL;Rename file
-FILEBROWSER_SHOWDIRHINT;Show all images of the directory
-FILEBROWSER_SHOWRANK1HINT;Show images ranked as 1 star
-FILEBROWSER_SHOWRANK2HINT;Show images ranked as 2 star
-FILEBROWSER_SHOWRANK3HINT;Show images ranked as 3 star
-FILEBROWSER_SHOWRANK4HINT;Show images ranked as 4 star
-FILEBROWSER_SHOWRANK5HINT;Show images ranked as 5 star
-FILEBROWSER_SHOWTRASHHINT;Show content of the trash
-FILEBROWSER_SHOWUNRANKHINT;Show unranked images
-FILEBROWSER_THUMBSIZE;Thumb. size
-FILEBROWSER_ZOOMINHINT;Increase thumbnail size
-FILEBROWSER_ZOOMOUTHINT;Decrease thumbnail size
-GENERAL_ABOUT;關於
-GENERAL_AFTER;After
-GENERAL_BEFORE;Before
-GENERAL_CANCEL;取消
-GENERAL_DISABLE;關閉
-GENERAL_DISABLED;已關閉
-GENERAL_ENABLE;啟用
-GENERAL_ENABLED;已開啟
-GENERAL_LANDSCAPE;橫向
-GENERAL_NA;不適用
-GENERAL_NO;否
-GENERAL_OK;確定
-GENERAL_PORTRAIT;縱向
-GENERAL_SAVE;儲存存
-GENERAL_UNCHANGED;(Unchanged)
-HISTOGRAM_TOOLTIP_B;顯示/隱藏 藍色直方圖
-HISTOGRAM_TOOLTIP_G;顯示/隱藏 綠色直方圖
-HISTOGRAM_TOOLTIP_L;顯示/隱藏e CIELAB 亮度直方圖
-HISTOGRAM_TOOLTIP_R;顯示/隱藏 紅色直方圖
-HISTORY_CHANGED;Changed
-HISTORY_CUSTOMCURVE;自定義曲線
-HISTORY_FROMCLIPBOARD;From clipboard
-HISTORY_LABEL;歷史
-HISTORY_MSG_1;圖片載入完
-HISTORY_MSG_2;配置載入完
-HISTORY_MSG_3;配置改變
-HISTORY_MSG_4;歷史流覽
-HISTORY_MSG_5;亮度
-HISTORY_MSG_6;對比度
-HISTORY_MSG_7;黑
-HISTORY_MSG_8;曝光補償
-HISTORY_MSG_9;亮部壓縮
-HISTORY_MSG_10;暗部壓縮
-HISTORY_MSG_11;色調曲線
-HISTORY_MSG_12;自動曝光
-HISTORY_MSG_13;曝光溢出
-HISTORY_MSG_14;光強亮度
-HISTORY_MSG_15;光強對比度
-HISTORY_MSG_16;光強黑
-HISTORY_MSG_17;光強亮部壓縮
-HISTORY_MSG_18;光強暗部壓縮
-HISTORY_MSG_19;光強曲線
-HISTORY_MSG_20;銳化
-HISTORY_MSG_21;銳化半徑
-HISTORY_MSG_22;銳化程度
-HISTORY_MSG_23;銳化闕值
-HISTORY_MSG_24;僅銳化邊緣
-HISTORY_MSG_25;銳化邊緣半徑
-HISTORY_MSG_26;銳化邊緣容差
-HISTORY_MSG_27;銳化光暈控制
-HISTORY_MSG_28;光暈控制量
-HISTORY_MSG_29;銳化方式
-HISTORY_MSG_30;重疊半徑
-HISTORY_MSG_31;重疊程度
-HISTORY_MSG_32;重疊衰減
-HISTORY_MSG_33;重疊次數
-HISTORY_MSG_34;避免色彩溢出
-HISTORY_MSG_35;飽和度限制器
-HISTORY_MSG_36;飽和度限制
-HISTORY_MSG_37;色彩增益
-HISTORY_MSG_38;拍平衡方式
-HISTORY_MSG_39;色溫
-HISTORY_MSG_40;白平衡微調
-HISTORY_MSG_41;色彩偏移 "A"
-HISTORY_MSG_42;色彩偏移 "B"
-HISTORY_MSG_43;光強降噪
-HISTORY_MSG_44;光強降噪半徑
-HISTORY_MSG_45;光強降噪邊緣容差
-HISTORY_MSG_46;色彩降噪
-HISTORY_MSG_47;色彩降噪半徑
-HISTORY_MSG_48;色彩降噪邊緣容差
-HISTORY_MSG_49;色彩降噪邊緣敏感度
-HISTORY_MSG_50;暗部/亮部工具
-HISTORY_MSG_51;亮部增益
-HISTORY_MSG_52;暗部增益
-HISTORY_MSG_53;亮部色度範圍
-HISTORY_MSG_54;暗部色度範圍
-HISTORY_MSG_55;局部對比度
-HISTORY_MSG_56;暗部/亮部半徑
-HISTORY_MSG_57;粗略旋轉
-HISTORY_MSG_58;水準翻轉
-HISTORY_MSG_59;豎直翻轉
-HISTORY_MSG_60;旋轉
-HISTORY_MSG_61;旋轉
-HISTORY_MSG_62;鏡頭失真矯正
-HISTORY_MSG_63;設置書簽
-HISTORY_MSG_64;剪切圖片
-HISTORY_MSG_65;C/A矯正
-HISTORY_MSG_66;高光還原
-HISTORY_MSG_67;高光還原程度
-HISTORY_MSG_68;高光還原方式
-HISTORY_MSG_69;工作色彩空間
-HISTORY_MSG_70;輸出色彩空間
-HISTORY_MSG_71;輸入色參空間
-HISTORY_MSG_72;邊暈矯正
-HISTORY_MSG_73;通道混合器
-HISTORY_MSG_74;調整大小比例
-HISTORY_MSG_75;調整大小方式
-HISTORY_MSG_76;Exif Metadata
-HISTORY_MSG_77;IPTC Metadata
-HISTORY_MSG_78;Data specified for resize
-HISTORY_MSG_79;Resize width
-HISTORY_MSG_80;Resize height
-HISTORY_MSG_81;Resize enabled
-HISTORY_NEWSNAPSHOT;新建快照
-HISTORY_SNAPSHOT;快照
-HISTORY_SNAPSHOTS;系列快照
-IPTCPANEL_CATEGORY;Category
-IPTCPANEL_CITY;City
-IPTCPANEL_COPYHINT;Copy IPTC settings to clipboard
-IPTCPANEL_COUNTRY;Country
-IPTCPANEL_CREDIT;Credit
-IPTCPANEL_CREDITHINT;Identifies the provider of the image, not necessarily the owner/creator (Credit).
-IPTCPANEL_DATECREATED;Date Created
-IPTCPANEL_EMBEDDED;Embedded
-IPTCPANEL_EMBEDDEDHINT;Reset to IPTC data embedded in the image file
-IPTCPANEL_HEADLINE;Headline
-IPTCPANEL_INSTRUCTIONS;Instructions
-IPTCPANEL_KEYWORDS;Keywords
-IPTCPANEL_PASTEHINT;Paste IPTC settings from clipboard
-IPTCPANEL_RESET;Reset
-IPTCPANEL_RESETHINT;Reset to profile default
-IPTCPANEL_SOURCE;Source
-IPTCPANEL_TITLE;Title
-MAIN_BUTTON_PREFERENCES;參數設置
-MAIN_BUTTON_PUTTOQUEUE;Put to queue
-MAIN_BUTTON_SAVE;儲存圖片
-MAIN_BUTTON_SENDTOEDITOR;Send to editor
-MAIN_FRAME_BATCHQUEUE;Batch Queue
-MAIN_FRAME_FILEBROWSER;File Browser
-MAIN_FRAME_PLACES;Places
-MAIN_FRAME_PLACES_ADD;Add
-MAIN_FRAME_RECENT;Recent Folders
-MAIN_MSG_ALREADYEXISTS;該文件已存在.
-MAIN_MSG_CANNOTLOAD;無法載入圖片
-MAIN_MSG_CANNOTSAVE;檔儲存中出錯
-MAIN_MSG_CANNOTSTARTEDITOR;Can not start editor.
-MAIN_MSG_CANNOTSTARTEDITOR_SECONDARY;Please set the correct path in the "Preferences" dialog.
-MAIN_MSG_NAVIGATOR;Navigator
-MAIN_MSG_QOVERWRITE;是否覆蓋?
-MAIN_TAB_COLOR;Color
-MAIN_TAB_DETAIL;Detail
-MAIN_TAB_DEVELOP;Develop
-MAIN_TAB_EXIF;Exif
-MAIN_TAB_EXPOSURE;Exposure
-MAIN_TAB_FILTER;Filter
-MAIN_TAB_IPTC;IPTC
-MAIN_TAB_METADATA;Metadata
-MAIN_TAB_TRANSFORM;轉換
-MAIN_TOOLTIP_HIDEHP;顯示/隱藏左面板 (包含歷史, shortcut key: H))
-MAIN_TOOLTIP_INDCLIPPEDH;高光溢出提示
-MAIN_TOOLTIP_INDCLIPPEDS;暗部不足提示
-MAIN_TOOLTIP_QINFO;圖片快捷資訊
-MAIN_TOOLTIP_TOGGLE;Toggle before/after view
-PARTIALPASTE_BASICGROUP;Basic settings
-PARTIALPASTE_CACORRECTION;C/A correction
-PARTIALPASTE_COARSETRANS;90 deg rotation / flipping
-PARTIALPASTE_COLORGROUP;Color related settings
-PARTIALPASTE_COMPOSITIONGROUP;Composition settings
-PARTIALPASTE_CROP;Crop
-PARTIALPASTE_DIALOGLABEL;Partial paste processing profile
-PARTIALPASTE_DISTORTION;Distortion correction
-PARTIALPASTE_EXIFCHANGES;Changes to exif data
-PARTIALPASTE_EXPOSURE;Exposure
-PARTIALPASTE_ICMSETTINGS;ICM settings
-PARTIALPASTE_IPTCINFO;IPTC info
-PARTIALPASTE_LENSGROUP;Lens related settings
-PARTIALPASTE_METAGROUP;Metadata
-PARTIALPASTE_RESIZE;Resize
-PARTIALPASTE_ROTATION;Rotation
-PARTIALPASTE_SHADOWSHIGHLIGHTS;Shadows/Highlights
-PARTIALPASTE_SHARPENING;Sharpening
-PARTIALPASTE_VIGNETTING;Vignetting correction
-PARTIALPASTE_WHITEBALANCE;White balance
-PREFERENCES_APPLNEXTSTARTUP;下次啟動生效
-PREFERENCES_CACHEMAXENTRIES;Maximal Number of Cache Entries
-PREFERENCES_CACHEOPTS;Cache Options
-PREFERENCES_CACHETHUMBHEIGHT;Maximal Thumbnail Height
-PREFERENCES_CLIPPINGIND;高光提示
-PREFERENCES_DATEFORMAT;日期格式
-PREFERENCES_DATEFORMATHINT;You can use the following formatting strings:\n%y : year\n%m : month\n%d : day\n\nFor example, the hungarian date format is:\n%y/%m/%d
-PREFERENCES_DIRHOME;用戶檔路徑
-PREFERENCES_DIRLAST;上次訪問路徑
-PREFERENCES_DIROTHER;其他
-PREFERENCES_DIRSELECTDLG;啟動時選擇圖片路徑...
-PREFERENCES_DIRSOFTWARE;軟體安裝路徑
-PREFERENCES_EXTERNALEDITOR;External editor
-PREFERENCES_FBROWSEROPTS;檔流覽選項
-PREFERENCES_FILEFORMAT;檔格式
-PREFERENCES_FORIMAGE;用於圖片檔
-PREFERENCES_FORRAW;用於Raw文件
-PREFERENCES_GIMPPATH;GIMP installation directory
-PREFERENCES_HLTHRESHOLD;高光溢出闕值
-PREFERENCES_ICCDIR;ICC配置路徑
-PREFERENCES_IMPROCPARAMS;預設圖片處理參數
-PREFERENCES_INTENT_ABSOLUTE;絕對色彩模式
-PREFERENCES_INTENT_PERCEPTUAL;感知模式
-PREFERENCES_INTENT_RELATIVE;相對色彩模式
-PREFERENCES_INTENT_SATURATION;飽和度
-PREFERENCES_OUTDIR;輸出路徑
-PREFERENCES_OUTDIRFOLDER;Save to folder
-PREFERENCES_OUTDIRFOLDERHINT;Put the saved images to the seledted folder
-PREFERENCES_OUTDIRTEMPLATE;Use Template
-PREFERENCES_OUTDIRTEMPLATEHINT;You can use the following formatting strings:\n%f, %d1, %d2, ..., %p1, %p2, ...\n\nThese formatting strings refer to the directories and sub-paths of the path of the raw file.\n\nFor example, if /home/tom/image/02-09-2006/dsc0012.nefhas been opened, the meaning of the formatting strings are:\n%f=dsc0012, %d1=02-09-2006, %d2=image, ...\n%p1=/home/tom/image/02-09-2006, %p2=/home/tom/image, p3=/home/tom, ...\n\nIf you want to save the output image where the original is, write:\n%p1/%f\n\nIf you want to save the output image in a directory 'converted' located the directory of the original, write:\n%p1/converted/%f\n\nIf you want to save the output image in directory '/home/tom/converted' with keeping the same subdirectory of dates, write:\n%p2/converted/%d1/%f
-PREFERENCES_PARSEDEXT;Parsed Extensions
-PREFERENCES_PARSEDEXTADD;Add Extension
-PREFERENCES_PARSEDEXTADDHINT;Type an extension and press this button to append list
-PREFERENCES_PARSEDEXTDELHINT;Delete selected extension from the list
-PREFERENCES_PROFILEHANDLING;Processing Profile Handling
-PREFERENCES_PROFILELOADPR;Profile Loading Priority
-PREFERENCES_PROFILEPRCACHE;Profile in Cache
-PREFERENCES_PROFILEPRFILE;Profile Next to the Input File
-PREFERENCES_PROFILESAVECACHE;Save Processing Parameters to the Cache
-PREFERENCES_PROFILESAVEINPUT;Save Processing Parameters Next to the Input File
-PREFERENCES_PSPATH;Adobe Photoshop installation directory
-PREFERENCES_SELECTLANG;選擇語言
-PREFERENCES_SHOWBASICEXIF;顯示基本Exif資訊
-PREFERENCES_SHOWDATETIME;顯示時間日期
-PREFERENCES_SHTHRESHOLD;暗部不足闕值
-PREFERENCES_STARTUPIMDIR;啟動時路徑
-PREFERENCES_TAB_BROWSER;檔流覽器
-PREFERENCES_TAB_COLORMGR;色彩管理
-PREFERENCES_TAB_GENERAL;一般
-PREFERENCES_TAB_IMPROC;圖片處理
-PROFILEPANEL_LABEL;處理參數配置
-PROFILEPANEL_LOADDLGLABEL;載入處理參數為...
-PROFILEPANEL_PCUSTOM;自定義
-PROFILEPANEL_PFILE;由文件
-PROFILEPANEL_PLASTSAVED;上次儲存
-PROFILEPANEL_SAVEDLGLABEL;儲存處理參數為...
-PROFILEPANEL_TOOLTIPCOPY;Copy current profile to clipboard
-PROFILEPANEL_TOOLTIPLOAD;由檔載入配置
-PROFILEPANEL_TOOLTIPPASTE; Paste profile from clipboard
-PROFILEPANEL_TOOLTIPSAVE;儲存當前配置
-PROGRESSBAR_LOADING;圖片載入中...
-PROGRESSBAR_LOADJPEG;JPEG載入中...
-PROGRESSBAR_LOADPNG;PNG載入中...
-PROGRESSBAR_LOADTIFF;TIFF載入中...
-PROGRESSBAR_PROCESSING;圖片處理中...
-PROGRESSBAR_READY;就緒
-PROGRESSBAR_SAVEJPEG;JPEG儲存中...
-PROGRESSBAR_SAVEPNG;PNG儲存中...
-PROGRESSBAR_SAVETIFF;TIFF儲存中...
-QINFO_ISO;ISO
-QINFO_NOEXIF;Exif資料不可用.
-SAVEDLG_FILEFORMAT;檔格式
-SAVEDLG_JPEGQUAL;JPEG品質
-SAVEDLG_PNGCOMPR;PNG壓縮
-SAVEDLG_PUTTOQUEUE;Put into processing queue
-SAVEDLG_PUTTOQUEUEHEAD;Put to the head of the processing queue
-SAVEDLG_PUTTOQUEUETAIL;Put to the end of the processing queue
-SAVEDLG_SAVEIMMEDIATELY;Save immediately
-SAVEDLG_SAVESPP;隨圖片儲存處理參數
-TOOLBAR_TOOLTIP_CROP;剪裁選擇 (shortcut key: C)
-TOOLBAR_TOOLTIP_HAND;手形工具 (shortcut key: N)
-TOOLBAR_TOOLTIP_STRAIGHTEN;基準線選擇 (shortcut key: S)
-TOOLBAR_TOOLTIP_WB;白平衡點 (shortcut key: W)
-TP_CACORRECTION_BLUE;藍
-TP_CACORRECTION_LABEL;C/A 矯正
-TP_CACORRECTION_RED;紅
-TP_CHMIXER_BLUE;藍
-TP_CHMIXER_GREEN;綠
-TP_CHMIXER_LABEL;通道混合
-TP_CHMIXER_RED;紅
-TP_COARSETRAF_TOOLTIP_HFLIP;水準翻轉
-TP_COARSETRAF_TOOLTIP_ROTLEFT;左轉
-TP_COARSETRAF_TOOLTIP_ROTRIGHT;右轉
-TP_COARSETRAF_TOOLTIP_VFLIP;豎直翻轉
-TP_CROP_FIXRATIO;比例:
-TP_CROP_GTDIAGONALS;對角線法則
-TP_CROP_GTNONE;無
-TP_CROP_GTRULETHIRDS;1/3法則
-TP_CROP_GUIDETYPE;輔助方式:
-TP_CROP_H;高
-TP_CROP_LABEL;剪裁
-TP_CROP_W;寬
-TP_CROP_X;x
-TP_CROP_Y;y
-TP_DISTORTION_AMOUNT;程度
-TP_DISTORTION_LABEL;畫面歪曲像差
-TP_EXPOSURE_AUTOLEVELS;自動色階
-TP_EXPOSURE_BLACKLEVEL;黑
-TP_EXPOSURE_BRIGHTNESS;亮度
-TP_EXPOSURE_CLIP;高光
-TP_EXPOSURE_COMPRHIGHLIGHTS;亮部壓縮
-TP_EXPOSURE_COMPRSHADOWS;暗部壓縮
-TP_EXPOSURE_CONTRAST;對比度
-TP_EXPOSURE_CURVEEDITOR;色調曲線
-TP_EXPOSURE_EXPCOMP;曝光補償
-TP_EXPOSURE_LABEL;曝光
-TP_HLREC_CIELAB;CIELab Blending
-TP_HLREC_COLOR;色彩延伸
-TP_HLREC_LABEL;高光挽回
-TP_HLREC_LUMINANCE;亮度挽回
-TP_HLREC_METHOD;方式:
-TP_ICM_INPUTCAMERA;相機預設
-TP_ICM_INPUTCUSTOM;自定義
-TP_ICM_INPUTDLGLABEL;選擇輸入ICC配置...
-TP_ICM_INPUTEMBEDDED;如可能，使用內置
-TP_ICM_INPUTPROFILE;輸入配置
-TP_ICM_LABEL;ICM
-TP_ICM_NOICM;No ICM: sRGB配置
-TP_ICM_OUTPUTPROFILE;輸出配置
-TP_ICM_WORKINGPROFILE;當前配置
-TP_RESIZE_H;高:
-TP_RESIZE_HEIGHT;Height
-TP_RESIZE_LABEL;調整大小
-TP_RESIZE_METHOD;方式:
-TP_RESIZE_NEAREST;最近點
-TP_RESIZE_SCALE;比例
-TP_RESIZE_SPECIFY;Specify:
-TP_RESIZE_W;寬:
-TP_RESIZE_WIDTH;Width
-TP_ROTATE_DEGREE;角度
-TP_ROTATE_LABEL;旋轉
-TP_ROTATE_SELECTLINE; 選擇基準線
-TP_SHADOWSHLIGHTS_HIGHLIGHTS;亮部
-TP_SHADOWSHLIGHTS_HLTONALW;色調範圍
-TP_SHADOWSHLIGHTS_LABEL;暗部/亮部
-TP_SHADOWSHLIGHTS_LOCALCONTR;局部對比度
-TP_SHADOWSHLIGHTS_RADIUS;半徑
-TP_SHADOWSHLIGHTS_SHADOWS;陰影
-TP_SHADOWSHLIGHTS_SHTONALW;色調範圍
-TP_SHARPENING_AMOUNT;程度
-TP_SHARPENING_EDRADIUS;半徑
-TP_SHARPENING_EDTOLERANCE;邊緣容差
-TP_SHARPENING_HALOCONTROL;光暈控制
-TP_SHARPENING_HCAMOUNT;程度
-TP_SHARPENING_LABEL;銳化
-TP_SHARPENING_METHOD;方式
-TP_SHARPENING_ONLYEDGES;僅銳化邊緣
-TP_SHARPENING_RADIUS;半徑
-TP_SHARPENING_RLD;左右重疊
-TP_SHARPENING_RLD_AMOUNT;程度
-TP_SHARPENING_RLD_DAMPING;衰減
-TP_SHARPENING_RLD_ITERATIONS;迭代
-TP_SHARPENING_THRESHOLD;闕值
-TP_SHARPENING_USM;銳化
-TP_VIGNETTING_AMOUNT;程度
-TP_VIGNETTING_LABEL;邊暈矯正
-TP_VIGNETTING_RADIUS;半徑
-TP_WBALANCE_AUTO;自動
-TP_WBALANCE_CAMERA;相機
-TP_WBALANCE_CUSTOM;自定義
-TP_WBALANCE_GREEN;色度
-TP_WBALANCE_LABEL;白平衡
-TP_WBALANCE_METHOD;方式
-TP_WBALANCE_SIZE;大小:
-TP_WBALANCE_SPOTWB;WB點
-TP_WBALANCE_TEMPERATURE;色溫
-
-!!!!!!!!!!!!!!!!!!!!!!!!!
-! Untranslated keys follow; remove the ! prefix after an entry is translated.
-!!!!!!!!!!!!!!!!!!!!!!!!!
-
-!ABOUT_TAB_BUILD;Version
-!ABOUT_TAB_CREDITS;Credits
-!ABOUT_TAB_LICENSE;License
-!ABOUT_TAB_RELEASENOTES;Release Notes
-!ABOUT_TAB_SPLASH;Splash
-!ADJUSTER_RESET_TO_DEFAULT;Click - reset to default value.\nCtrl+click - reset to initial value.
-!BATCHQUEUE_DESTFILENAME;Path and file name
-!BATCHQUEUE_STARTSTOPHINT;Start or stop processing the images in the queue.\n\nShortcut: Ctrl+s
-!BATCH_PROCESSING;Batch Processing
-!CURVEEDITOR_AXIS_IN;I:
-!CURVEEDITOR_AXIS_LEFT_TAN;LT:
-!CURVEEDITOR_AXIS_OUT;O:
-!CURVEEDITOR_AXIS_RIGHT_TAN;RT:
-!CURVEEDITOR_CATMULLROM;Flexible
-!CURVEEDITOR_CURVE;Curve
-!CURVEEDITOR_CURVES;Curves
-!CURVEEDITOR_CUSTOM;Standard
-!CURVEEDITOR_DARKS;Darks
-!CURVEEDITOR_EDITPOINT_HINT;Enable edition of node in/out values.\n\nRight-click on a node to select it.\nRight-click on empty space to de-select the node.
-!CURVEEDITOR_HIGHLIGHTS;Highlights
-!CURVEEDITOR_LIGHTS;Lights
-!CURVEEDITOR_MINMAXCPOINTS;Equalizer
-!CURVEEDITOR_NURBS;Control cage
-!CURVEEDITOR_PARAMETRIC;Parametric
-!CURVEEDITOR_SHADOWS;Shadows
-!CURVEEDITOR_TOOLTIPCOPY;Copy current curve to clipboard.
-!CURVEEDITOR_TOOLTIPPASTE;Paste curve from clipboard.
-!CURVEEDITOR_TYPE;Type:
-!DONT_SHOW_AGAIN;Don't show this message again.
-!DYNPROFILEEDITOR_DELETE;Delete
-!DYNPROFILEEDITOR_EDIT;Edit
-!DYNPROFILEEDITOR_EDIT_RULE;Edit Dynamic Profile Rule
-!DYNPROFILEEDITOR_ENTRY_TOOLTIP;The matching is case insensitive.\nUse the "re:" prefix to enter\na regular expression.
-!DYNPROFILEEDITOR_IMGTYPE_ANY;Any
-!DYNPROFILEEDITOR_IMGTYPE_HDR;HDR
-!DYNPROFILEEDITOR_IMGTYPE_PS;Pixel Shift
-!DYNPROFILEEDITOR_IMGTYPE_STD;Standard
-!DYNPROFILEEDITOR_MOVE_DOWN;Move Down
-!DYNPROFILEEDITOR_MOVE_UP;Move Up
-!DYNPROFILEEDITOR_NEW;New
-!DYNPROFILEEDITOR_NEW_RULE;New Dynamic Profile Rule
-!DYNPROFILEEDITOR_PROFILE;Processing Profile
-!EDITWINDOW_TITLE;Image Edit
-!EDIT_OBJECT_TOOLTIP;Displays a widget on the preview window which lets you adjust this tool.
-!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
-!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
-!EXIFFILTER_FILETYPE;File type
-!EXIFFILTER_IMAGETYPE;Image type
-!EXIFFILTER_METADATAFILTER;Enable metadata filters
-!EXIFPANEL_SHOWALL;Show all
-!EXPORT_BYPASS;Processing steps to bypass
-!EXPORT_BYPASS_ALL;Select / Unselect All
-!EXPORT_BYPASS_DEFRINGE;Bypass Defringe
-!EXPORT_BYPASS_DIRPYRDENOISE;Bypass Noise Reduction
-!EXPORT_BYPASS_DIRPYREQUALIZER;Bypass Contrast by Detail Levels
-!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
-!EXPORT_BYPASS_RAW_CA;Bypass [raw] Chromatic Aberration Correction
-!EXPORT_BYPASS_RAW_CCSTEPS;Bypass [raw] False Color Suppression
-!EXPORT_BYPASS_RAW_DCB_ENHANCE;Bypass [raw] DCB Enhancement Steps
-!EXPORT_BYPASS_RAW_DCB_ITERATIONS;Bypass [raw] DCB Iterations
-!EXPORT_BYPASS_RAW_DF;Bypass [raw] Dark-Frame
-!EXPORT_BYPASS_RAW_FF;Bypass [raw] Flat-Field
-!EXPORT_BYPASS_RAW_GREENTHRESH;Bypass [raw] Green Equilibration
-!EXPORT_BYPASS_RAW_LINENOISE;Bypass [raw] Line Noise Filter
-!EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Bypass [raw] LMMSE Enhancement Steps
-!EXPORT_BYPASS_SHARPENEDGE;Bypass Edge Sharpening
-!EXPORT_BYPASS_SHARPENING;Bypass Sharpening
-!EXPORT_BYPASS_SHARPENMICRO;Bypass Microcontrast
-!EXPORT_BYPASS_SH_HQ;Bypass Sharp Mask Shadows/Highlights
-!EXPORT_FASTEXPORTOPTIONS;Fast Export Options
-!EXPORT_INSTRUCTIONS;Fast Export options provide overrides to bypass time and resource consuming development settings and to run queue processing using the fast export settings instead. This method is recommended for quicker generation of lower resolution images when speed is a priority or when resized output is desired for one or many images without making modifications to their saved development parameters.
-!EXPORT_MAXHEIGHT;Maximum height:
-!EXPORT_MAXWIDTH;Maximum width:
-!EXPORT_PIPELINE;Processing pipeline
-!EXPORT_PUTTOQUEUEFAST; Put to queue for fast export
-!EXPORT_RAW_DMETHOD;Demosaic method
-!EXPORT_USE_FAST_PIPELINE;Dedicated (full processing on resized image)
-!EXPORT_USE_FAST_PIPELINE_TIP;Use a dedicated processing pipeline for images in Fast Export mode, that trades speed for quality. Resizing of the image is done as early as possible, instead of doing it at the end like in the normal pipeline. The speedup can be significant, but be prepared to see artifacts and a general degradation of output quality.
-!EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
-!EXTPROGTARGET_1;raw
-!EXTPROGTARGET_2;queue-processed
-!FILEBROWSER_ADDDELTEMPLATE;Add/Del templates...
-!FILEBROWSER_APPLYPROFILE_PARTIAL;Apply - partial
-!FILEBROWSER_AUTODARKFRAME;Auto dark-frame
-!FILEBROWSER_AUTOFLATFIELD;Auto flat-field
-!FILEBROWSER_BROWSEPATHBUTTONHINT;Click to open specified path, reload folder and apply "find" keywords.
-!FILEBROWSER_BROWSEPATHHINT;Type a path to navigate to.\n\nKeyboard shortcuts:\nCtrl-o to focus to the path text box.\nEnter / Ctrl-Enter to browse there;\nEsc to clear changes.\nShift-Esc to remove focus.\n\nPath shortcuts:\n~ - user's home directory.\n! - user's pictures directory
-!FILEBROWSER_CACHE;Cache
-!FILEBROWSER_CACHECLEARFROMFULL;Clear all including cached profiles
-!FILEBROWSER_CACHECLEARFROMPARTIAL;Clear all except cached profiles
-!FILEBROWSER_COLORLABEL_TOOLTIP;Color label.\n\nUse dropdown menu or shortcuts:\nShift-Ctrl-0 No Color\nShift-Ctrl-1 Red\nShift-Ctrl-2 Yellow\nShift-Ctrl-3 Green\nShift-Ctrl-4 Blue\nShift-Ctrl-5 Purple
-!FILEBROWSER_CURRENT_NAME;Current name:
-!FILEBROWSER_DARKFRAME;Dark-frame
-!FILEBROWSER_DELETEDLGMSGINCLPROC;Are you sure you want to delete the selected %1 files including a queue-processed version?
-!FILEBROWSER_EXTPROGMENU;Open with
-!FILEBROWSER_FLATFIELD;Flat-Field
-!FILEBROWSER_MOVETODARKFDIR;Move to dark-frames directory
-!FILEBROWSER_MOVETOFLATFIELDDIR;Move to flat-fields directory
-!FILEBROWSER_NEW_NAME;New name:
-!FILEBROWSER_OPENDEFAULTVIEWER;Windows default viewer (queue-processed)
-!FILEBROWSER_POPUPCOLORLABEL;Color label
-!FILEBROWSER_POPUPCOLORLABEL0;Label: None
-!FILEBROWSER_POPUPCOLORLABEL1;Label: Red
-!FILEBROWSER_POPUPCOLORLABEL2;Label: Yellow
-!FILEBROWSER_POPUPCOLORLABEL3;Label: Green
-!FILEBROWSER_POPUPCOLORLABEL4;Label: Blue
-!FILEBROWSER_POPUPCOLORLABEL5;Label: Purple
-!FILEBROWSER_POPUPCOPYTO;Copy to...
-!FILEBROWSER_POPUPFILEOPERATIONS;File operations
-!FILEBROWSER_POPUPMOVETO;Move to...
-!FILEBROWSER_POPUPPROCESSFAST;Put to queue (Fast export)
-!FILEBROWSER_POPUPPROFILEOPERATIONS;Processing profile operations
-!FILEBROWSER_POPUPRANK;Rank
-!FILEBROWSER_POPUPRANK0;Unrank
-!FILEBROWSER_POPUPRANK1;Rank 1 *
-!FILEBROWSER_POPUPRANK2;Rank 2 **
-!FILEBROWSER_POPUPRANK3;Rank 3 ***
-!FILEBROWSER_POPUPRANK4;Rank 4 ****
-!FILEBROWSER_POPUPRANK5;Rank 5 *****
-!FILEBROWSER_POPUPREMOVEINCLPROC;Delete with output from queue
-!FILEBROWSER_QUERYBUTTONHINT;Clear the Find query
-!FILEBROWSER_QUERYHINT;Type filenames to search for. Supports partial filenames. Separate the search terms using commas, e.g.\n1001,1004,1199\n\nExclude search terms by prefixing them with !=\ne.g.\n!=1001,1004,1199\n\nShortcuts:\nCtrl-f - focus the Find box,\nEnter - search,\nEsc - clear the Find box,\nShift-Esc - defocus the Find box.
-!FILEBROWSER_QUERYLABEL; Find:
-!FILEBROWSER_RANK1_TOOLTIP;Rank 1 *\nShortcut: Shift-1
-!FILEBROWSER_RANK2_TOOLTIP;Rank 2 *\nShortcut: Shift-2
-!FILEBROWSER_RANK3_TOOLTIP;Rank 3 *\nShortcut: Shift-3
-!FILEBROWSER_RANK4_TOOLTIP;Rank 4 *\nShortcut: Shift-4
-!FILEBROWSER_RANK5_TOOLTIP;Rank 5 *\nShortcut: Shift-5
-!FILEBROWSER_RESETDEFAULTPROFILE;Reset to default
-!FILEBROWSER_SELECTDARKFRAME;Select dark-frame...
-!FILEBROWSER_SELECTFLATFIELD;Select flat-field...
-!FILEBROWSER_SHOWCOLORLABEL1HINT;Show images labeled Red.\nShortcut: Alt-1
-!FILEBROWSER_SHOWCOLORLABEL2HINT;Show images labeled Yellow.\nShortcut: Alt-2
-!FILEBROWSER_SHOWCOLORLABEL3HINT;Show images labeled Green.\nShortcut: Alt-3
-!FILEBROWSER_SHOWCOLORLABEL4HINT;Show images labeled Blue.\nShortcut: Alt-4
-!FILEBROWSER_SHOWCOLORLABEL5HINT;Show images labeled Purple.\nShortcut: Alt-5
-!FILEBROWSER_SHOWEDITEDHINT;Show edited images.\nShortcut: 7
-!FILEBROWSER_SHOWEDITEDNOTHINT;Show not edited images.\nShortcut: 6
-!FILEBROWSER_SHOWEXIFINFO;Show Exif info.\n\nShortcuts:\ni - Multiple Editor Tabs Mode,\nAlt-i - Single Editor Tab Mode.
-!FILEBROWSER_SHOWNOTTRASHHINT;Show only non-deleted images.
-!FILEBROWSER_SHOWORIGINALHINT;Show only original images.\n\nWhen several images exist with the same filename but different extensions, the one considered original is the one whose extension is nearest the top of the parsed extensions list in Preferences > File Browser > Parsed Extensions.
-!FILEBROWSER_SHOWRECENTLYSAVEDHINT;Show saved images.\nShortcut: Alt-7
-!FILEBROWSER_SHOWRECENTLYSAVEDNOTHINT;Show unsaved images.\nShortcut: Alt-6
-!FILEBROWSER_SHOWUNCOLORHINT;Show images without a color label.\nShortcut: Alt-0
-!FILEBROWSER_UNRANK_TOOLTIP;Unrank.\nShortcut: Shift-0
-!FILECHOOSER_FILTER_ANY;All files
-!FILECHOOSER_FILTER_COLPROF;Color profiles (*.icc)
-!FILECHOOSER_FILTER_CURVE;Curve files
-!FILECHOOSER_FILTER_LCP;Lens correction profiles
-!FILECHOOSER_FILTER_PP;Processing profiles
-!FILECHOOSER_FILTER_SAME;Same format as current photo
-!FILECHOOSER_FILTER_TIFF;TIFF files
-!GENERAL_APPLY;Apply
-!GENERAL_ASIMAGE;As Image
-!GENERAL_AUTO;Automatic
-!GENERAL_CLOSE;Close
-!GENERAL_CURRENT;Current
-!GENERAL_FILE;File
-!GENERAL_NONE;None
-!GENERAL_OPEN;Open
-!GENERAL_RESET;Reset
-!GENERAL_SAVE_AS;Save as...
-!GENERAL_SLIDER;Slider
-!GENERAL_WARNING;Warning
-!GIMP_PLUGIN_INFO;Welcome to the RawTherapee GIMP plugin!\nOnce you are done editing, simply close the main RawTherapee window and the image will be automatically imported in GIMP.
-!HISTOGRAM_TOOLTIP_BAR;Show/Hide RGB indicator bar.
-!HISTOGRAM_TOOLTIP_CHRO;Show/Hide chromaticity histogram.
-!HISTOGRAM_TOOLTIP_MODE;Toggle between linear, log-linear and log-log scaling of the histogram.
-!HISTOGRAM_TOOLTIP_RAW;Show/Hide raw histogram.
-!HISTORY_MSG_82;Profile changed
-!HISTORY_MSG_83;S/H - Sharp mask
-!HISTORY_MSG_84;Perspective correction
-!HISTORY_MSG_85;Lens Correction - LCP file
-!HISTORY_MSG_86;RGB Curves - Luminosity mode
-!HISTORY_MSG_87;Impulse Noise Reduction
-!HISTORY_MSG_88;Impulse NR threshold
-!HISTORY_MSG_89;Noise Reduction
-!HISTORY_MSG_90;NR - Luminance
-!HISTORY_MSG_91;NR - Chrominance master
-!HISTORY_MSG_92;NR - Gamma
-!HISTORY_MSG_93;CbDL - Value
-!HISTORY_MSG_94;Contrast by Detail Levels
-!HISTORY_MSG_95;L*a*b* - Chromaticity
-!HISTORY_MSG_96;L*a*b* - a* curve
-!HISTORY_MSG_97;L*a*b* - b* curve
-!HISTORY_MSG_98;Demosaicing method
-!HISTORY_MSG_99;Hot pixel filter
-!HISTORY_MSG_100;Exposure - Saturation
-!HISTORY_MSG_101;HSV - Hue
-!HISTORY_MSG_102;HSV - Saturation
-!HISTORY_MSG_103;HSV - Value
-!HISTORY_MSG_104;HSV Equalizer
-!HISTORY_MSG_105;Defringe
-!HISTORY_MSG_106;Defringe - Radius
-!HISTORY_MSG_107;Defringe - Threshold
-!HISTORY_MSG_108;Exposure - HLC threshold
-!HISTORY_MSG_109;Resize - Bounding box
-!HISTORY_MSG_110;Resize - Applies to
-!HISTORY_MSG_111;L*a*b* - Avoid color shift
-!HISTORY_MSG_112;--unused--
-!HISTORY_MSG_113;L*a*b* - Red/skin prot.
-!HISTORY_MSG_114;DCB iterations
-!HISTORY_MSG_115;False color suppression
-!HISTORY_MSG_116;DCB enhancement
-!HISTORY_MSG_117;Raw CA correction - Red
-!HISTORY_MSG_118;Raw CA correction - Blue
-!HISTORY_MSG_119;Line noise filter
-!HISTORY_MSG_120;Green equilibration
-!HISTORY_MSG_121;Raw CA Correction - Auto
-!HISTORY_MSG_122;Dark-Frame - Auto-selection
-!HISTORY_MSG_123;Dark-Frame - File
-!HISTORY_MSG_124;White point correction
-!HISTORY_MSG_126;Flat-Field - File
-!HISTORY_MSG_127;Flat-Field - Auto-selection
-!HISTORY_MSG_128;Flat-Field - Blur radius
-!HISTORY_MSG_129;Flat-Field - Blur type
-!HISTORY_MSG_130;Auto distortion correction
-!HISTORY_MSG_131;NR - Luma
-!HISTORY_MSG_132;NR - Chroma
-!HISTORY_MSG_133;Output gamma
-!HISTORY_MSG_134;Free gamma
-!HISTORY_MSG_135;Free gamma
-!HISTORY_MSG_136;Free gamma slope
-!HISTORY_MSG_137;Black level - Green 1
-!HISTORY_MSG_138;Black level - Red
-!HISTORY_MSG_139;Black level - Blue
-!HISTORY_MSG_140;Black level - Green 2
-!HISTORY_MSG_141;Black level - Link greens
-!HISTORY_MSG_142;ES - Iterations
-!HISTORY_MSG_143;ES - Quantity
-!HISTORY_MSG_144;Microcontrast - Quantity
-!HISTORY_MSG_145;Microcontrast - Uniformity
-!HISTORY_MSG_146;Edge sharpening
-!HISTORY_MSG_147;ES - Luminance only
-!HISTORY_MSG_148;Microcontrast
-!HISTORY_MSG_149;Microcontrast - 3×3 matrix
-!HISTORY_MSG_150;Post-demosaic artifact/noise red.
-!HISTORY_MSG_151;Vibrance
-!HISTORY_MSG_152;Vib - Pastel tones
-!HISTORY_MSG_153;Vib - Saturated tones
-!HISTORY_MSG_154;Vib - Protect skin-tones
-!HISTORY_MSG_155;Vib - Avoid color shift
-!HISTORY_MSG_156;Vib - Link pastel/saturated
-!HISTORY_MSG_157;Vib - P/S threshold
-!HISTORY_MSG_158;TM - Strength
-!HISTORY_MSG_159;TM - Edge stopping
-!HISTORY_MSG_160;TM - Scale
-!HISTORY_MSG_161;TM - Reweighting iterates
-!HISTORY_MSG_162;Tone Mapping
-!HISTORY_MSG_163;RGB Curves - Red
-!HISTORY_MSG_164;RGB Curves - Green
-!HISTORY_MSG_165;RGB Curves - Blue
-!HISTORY_MSG_166;Exposure - Reset
-!HISTORY_MSG_167;Demosaicing method
-!HISTORY_MSG_168;L*a*b* - CC curve
-!HISTORY_MSG_169;L*a*b* - CH curve
-!HISTORY_MSG_170;Vibrance - HH curve
-!HISTORY_MSG_171;L*a*b* - LC curve
-!HISTORY_MSG_172;L*a*b* - Restrict LC
-!HISTORY_MSG_173;NR - Detail recovery
-!HISTORY_MSG_174;CIECAM02
-!HISTORY_MSG_175;CAM02 - CAT02 adaptation
-!HISTORY_MSG_176;CAM02 - Viewing surround
-!HISTORY_MSG_177;CAM02 - Scene luminosity
-!HISTORY_MSG_178;CAM02 - Viewing luminosity
-!HISTORY_MSG_179;CAM02 - White-point model
-!HISTORY_MSG_180;CAM02 - Lightness (J)
-!HISTORY_MSG_181;CAM02 - Chroma (C)
-!HISTORY_MSG_182;CAM02 - Automatic CAT02
-!HISTORY_MSG_183;CAM02 - Contrast (J)
-!HISTORY_MSG_184;CAM02 - Scene surround
-!HISTORY_MSG_185;CAM02 - Gamut control
-!HISTORY_MSG_186;CAM02 - Algorithm
-!HISTORY_MSG_187;CAM02 - Red/skin prot.
-!HISTORY_MSG_188;CAM02 - Brightness (Q)
-!HISTORY_MSG_189;CAM02 - Contrast (Q)
-!HISTORY_MSG_190;CAM02 - Saturation (S)
-!HISTORY_MSG_191;CAM02 - Colorfulness (M)
-!HISTORY_MSG_192;CAM02 - Hue (h)
-!HISTORY_MSG_193;CAM02 - Tone curve 1
-!HISTORY_MSG_194;CAM02 - Tone curve 2
-!HISTORY_MSG_195;CAM02 - Tone curve 1
-!HISTORY_MSG_196;CAM02 - Tone curve 2
-!HISTORY_MSG_197;CAM02 - Color curve
-!HISTORY_MSG_198;CAM02 - Color curve
-!HISTORY_MSG_199;CAM02 - Output histograms
-!HISTORY_MSG_200;CAM02 - Tone mapping
-!HISTORY_MSG_201;NR - Chrominance - R&G
-!HISTORY_MSG_202;NR - Chrominance - B&Y
-!HISTORY_MSG_203;NR - Color space
-!HISTORY_MSG_204;LMMSE enhancement steps
-!HISTORY_MSG_205;CAM02 - Hot/bad pixel filter
-!HISTORY_MSG_206;CAT02 - Auto scene luminosity
-!HISTORY_MSG_207;Defringe - Hue curve
-!HISTORY_MSG_208;WB - B/R equalizer
-!HISTORY_MSG_210;GF - Angle
-!HISTORY_MSG_211;Graduated Filter
-!HISTORY_MSG_212;VF - Strength
-!HISTORY_MSG_213;Vignette Filter
-!HISTORY_MSG_214;Black-and-White
-!HISTORY_MSG_215;B&W - CM - Red
-!HISTORY_MSG_216;B&W - CM - Green
-!HISTORY_MSG_217;B&W - CM - Blue
-!HISTORY_MSG_218;B&W - Gamma - Red
-!HISTORY_MSG_219;B&W - Gamma - Green
-!HISTORY_MSG_220;B&W - Gamma - Blue
-!HISTORY_MSG_221;B&W - Color filter
-!HISTORY_MSG_222;B&W - Presets
-!HISTORY_MSG_223;B&W - CM - Orange
-!HISTORY_MSG_224;B&W - CM - Yellow
-!HISTORY_MSG_225;B&W - CM - Cyan
-!HISTORY_MSG_226;B&W - CM - Magenta
-!HISTORY_MSG_227;B&W - CM - Purple
-!HISTORY_MSG_228;B&W - Luminance equalizer
-!HISTORY_MSG_229;B&W - Luminance equalizer
-!HISTORY_MSG_230;B&W - Mode
-!HISTORY_MSG_231;B&W - 'Before' curve
-!HISTORY_MSG_232;B&W - 'Before' curve type
-!HISTORY_MSG_233;B&W - 'After' curve
-!HISTORY_MSG_234;B&W - 'After' curve type
-!HISTORY_MSG_235;B&W - CM - Auto
-!HISTORY_MSG_236;--unused--
-!HISTORY_MSG_237;B&W - CM
-!HISTORY_MSG_238;GF - Feather
-!HISTORY_MSG_239;GF - Strength
-!HISTORY_MSG_240;GF - Center
-!HISTORY_MSG_241;VF - Feather
-!HISTORY_MSG_242;VF - Roundness
-!HISTORY_MSG_243;VC - Radius
-!HISTORY_MSG_244;VC - Strength
-!HISTORY_MSG_245;VC - Center
-!HISTORY_MSG_246;L*a*b* - CL curve
-!HISTORY_MSG_247;L*a*b* - LH curve
-!HISTORY_MSG_248;L*a*b* - HH curve
-!HISTORY_MSG_249;CbDL - Threshold
-!HISTORY_MSG_250;NR - Enhanced
-!HISTORY_MSG_251;B&W - Algorithm
-!HISTORY_MSG_252;CbDL - Skin tar/prot
-!HISTORY_MSG_253;CbDL - Reduce artifacts
-!HISTORY_MSG_254;CbDL - Skin hue
-!HISTORY_MSG_255;NR - Median filter
-!HISTORY_MSG_256;NR - Median - Type
-!HISTORY_MSG_257;Color Toning
-!HISTORY_MSG_258;CT - Color curve
-!HISTORY_MSG_259;CT - Opacity curve
-!HISTORY_MSG_260;CT - a*[b*] opacity
-!HISTORY_MSG_261;CT - Method
-!HISTORY_MSG_262;CT - b* opacity
-!HISTORY_MSG_263;CT - Shadows - Red
-!HISTORY_MSG_264;CT - Shadows - Green
-!HISTORY_MSG_265;CT - Shadows - Blue
-!HISTORY_MSG_266;CT - Mid - Red
-!HISTORY_MSG_267;CT - Mid - Green
-!HISTORY_MSG_268;CT - Mid - Blue
-!HISTORY_MSG_269;CT - High - Red
-!HISTORY_MSG_270;CT - High - Green
-!HISTORY_MSG_271;CT - High - Blue
-!HISTORY_MSG_272;CT - Balance
-!HISTORY_MSG_273;CT - Color Balance SMH
-!HISTORY_MSG_274;CT - Sat. Shadows
-!HISTORY_MSG_275;CT - Sat. Highlights
-!HISTORY_MSG_276;CT - Opacity
-!HISTORY_MSG_277;--unused--
-!HISTORY_MSG_278;CT - Preserve luminance
-!HISTORY_MSG_279;CT - Shadows
-!HISTORY_MSG_280;CT - Highlights
-!HISTORY_MSG_281;CT - Sat. strength
-!HISTORY_MSG_282;CT - Sat. threshold
-!HISTORY_MSG_283;CT - Strength
-!HISTORY_MSG_284;CT - Auto sat. protection
-!HISTORY_MSG_285;NR - Median - Method
-!HISTORY_MSG_286;NR - Median - Type
-!HISTORY_MSG_287;NR - Median - Iterations
-!HISTORY_MSG_288;Flat-Field - Clip control
-!HISTORY_MSG_289;Flat-Field - Clip control - Auto
-!HISTORY_MSG_290;Black Level - Red
-!HISTORY_MSG_291;Black Level - Green
-!HISTORY_MSG_292;Black Level - Blue
-!HISTORY_MSG_293;Film Simulation
-!HISTORY_MSG_294;Film Simulation - Strength
-!HISTORY_MSG_295;Film Simulation - Film
-!HISTORY_MSG_296;NR - Luminance curve
-!HISTORY_MSG_297;NR - Mode
-!HISTORY_MSG_298;Dead pixel filter
-!HISTORY_MSG_299;NR - Chrominance curve
-!HISTORY_MSG_300;-
-!HISTORY_MSG_301;NR - Luma control
-!HISTORY_MSG_302;NR - Chroma method
-!HISTORY_MSG_303;NR - Chroma method
-!HISTORY_MSG_304;W - Contrast levels
-!HISTORY_MSG_305;Wavelet Levels
-!HISTORY_MSG_306;W - Process
-!HISTORY_MSG_307;W - Process
-!HISTORY_MSG_308;W - Process direction
-!HISTORY_MSG_309;W - ES - Detail
-!HISTORY_MSG_310;W - Residual - Sky tar/prot
-!HISTORY_MSG_311;W - Wavelet levels
-!HISTORY_MSG_312;W - Residual - Shadows threshold
-!HISTORY_MSG_313;W - Chroma - Sat/past
-!HISTORY_MSG_314;W - Gamut - Reduce artifacts
-!HISTORY_MSG_315;W - Residual - Contrast
-!HISTORY_MSG_316;W - Gamut - Skin tar/prot
-!HISTORY_MSG_317;W - Gamut - Skin hue
-!HISTORY_MSG_318;W - Contrast - Highlight levels
-!HISTORY_MSG_319;W - Contrast - Highlight range
-!HISTORY_MSG_320;W - Contrast - Shadow range
-!HISTORY_MSG_321;W - Contrast - Shadow levels
-!HISTORY_MSG_322;W - Gamut - Avoid color shift
-!HISTORY_MSG_323;W - ES - Local contrast
-!HISTORY_MSG_324;W - Chroma - Pastel
-!HISTORY_MSG_325;W - Chroma - Saturated
-!HISTORY_MSG_326;W - Chroma - Method
-!HISTORY_MSG_327;W - Contrast - Apply to
-!HISTORY_MSG_328;W - Chroma - Link strength
-!HISTORY_MSG_329;W - Toning - Opacity RG
-!HISTORY_MSG_330;W - Toning - Opacity BY
-!HISTORY_MSG_331;W - Contrast levels - Extra
-!HISTORY_MSG_332;W - Tiling method
-!HISTORY_MSG_333;W - Residual - Shadows
-!HISTORY_MSG_334;W - Residual - Chroma
-!HISTORY_MSG_335;W - Residual - Highlights
-!HISTORY_MSG_336;W - Residual - Highlights threshold
-!HISTORY_MSG_337;W - Residual - Sky hue
-!HISTORY_MSG_338;W - ES - Radius
-!HISTORY_MSG_339;W - ES - Strength
-!HISTORY_MSG_340;W - Strength
-!HISTORY_MSG_341;W - Edge performance
-!HISTORY_MSG_342;W - ES - First level
-!HISTORY_MSG_343;W - Chroma levels
-!HISTORY_MSG_344;W - Meth chroma sl/cur
-!HISTORY_MSG_345;W - ES - Local contrast
-!HISTORY_MSG_346;W - ES - Local contrast method
-!HISTORY_MSG_347;W - Denoise - Level 1
-!HISTORY_MSG_348;W - Denoise - Level 2
-!HISTORY_MSG_349;W - Denoise - Level 3
-!HISTORY_MSG_350;W - ES - Edge detection
-!HISTORY_MSG_351;W - Residual - HH curve
-!HISTORY_MSG_352;W - Background
-!HISTORY_MSG_353;W - ES - Gradient sensitivity
-!HISTORY_MSG_354;W - ES - Enhanced
-!HISTORY_MSG_355;W - ES - Threshold low
-!HISTORY_MSG_356;W - ES - Threshold high
-!HISTORY_MSG_357;W - Denoise - Link with ES
-!HISTORY_MSG_358;W - Gamut - CH
-!HISTORY_MSG_359;Hot/Dead - Threshold
-!HISTORY_MSG_360;TM - Gamma
-!HISTORY_MSG_361;W - Final - Chroma balance
-!HISTORY_MSG_362;W - Residual - Compression method
-!HISTORY_MSG_363;W - Residual - Compression strength
-!HISTORY_MSG_364;W - Final - Contrast balance
-!HISTORY_MSG_365;W - Final - Delta balance
-!HISTORY_MSG_366;W - Residual - Compression gamma
-!HISTORY_MSG_367;W - Final - 'After' contrast curve
-!HISTORY_MSG_368;W - Final - Contrast balance
-!HISTORY_MSG_369;W - Final - Balance method
-!HISTORY_MSG_370;W - Final - Local contrast curve
-!HISTORY_MSG_371;Post-Resize Sharpening
-!HISTORY_MSG_372;PRS USM - Radius
-!HISTORY_MSG_373;PRS USM - Amount
-!HISTORY_MSG_374;PRS USM - Threshold
-!HISTORY_MSG_375;PRS USM - Sharpen only edges
-!HISTORY_MSG_376;PRS USM - Edge detection radius
-!HISTORY_MSG_377;PRS USM - Edge tolerance
-!HISTORY_MSG_378;PRS USM - Halo control
-!HISTORY_MSG_379;PRS USM - Halo control amount
-!HISTORY_MSG_380;PRS - Method
-!HISTORY_MSG_381;PRS RLD - Radius
-!HISTORY_MSG_382;PRS RLD - Amount
-!HISTORY_MSG_383;PRS RLD - Damping
-!HISTORY_MSG_384;PRS RLD - Iterations
-!HISTORY_MSG_385;W - Residual - Color Balance
-!HISTORY_MSG_386;W - Residual - CB green high
-!HISTORY_MSG_387;W - Residual - CB blue high
-!HISTORY_MSG_388;W - Residual - CB green mid
-!HISTORY_MSG_389;W - Residual - CB blue mid
-!HISTORY_MSG_390;W - Residual - CB green low
-!HISTORY_MSG_391;W - Residual - CB blue low
-!HISTORY_MSG_392;W - Residual - Color Balance
-!HISTORY_MSG_393;DCP - Look table
-!HISTORY_MSG_394;DCP - Baseline exposure
-!HISTORY_MSG_395;DCP - Base table
-!HISTORY_MSG_396;W - Contrast sub-tool
-!HISTORY_MSG_397;W - Chroma sub-tool
-!HISTORY_MSG_398;W - ES sub-tool
-!HISTORY_MSG_399;W - Residual sub-tool
-!HISTORY_MSG_400;W - Final sub-tool
-!HISTORY_MSG_401;W - Toning sub-tool
-!HISTORY_MSG_402;W - Denoise sub-tool
-!HISTORY_MSG_403;W - ES - Edge sensitivity
-!HISTORY_MSG_404;W - ES - Base amplification
-!HISTORY_MSG_405;W - Denoise - Level 4
-!HISTORY_MSG_406;W - ES - Neighboring pixels
-!HISTORY_MSG_407;Retinex - Method
-!HISTORY_MSG_408;Retinex - Radius
-!HISTORY_MSG_409;Retinex - Contrast
-!HISTORY_MSG_410;Retinex - Offset
-!HISTORY_MSG_411;Retinex - Strength
-!HISTORY_MSG_412;Retinex - Gaussian gradient
-!HISTORY_MSG_413;Retinex - Contrast
-!HISTORY_MSG_414;Retinex - Histogram - Lab
-!HISTORY_MSG_415;Retinex - Transmission
-!HISTORY_MSG_416;Retinex
-!HISTORY_MSG_417;Retinex - Transmission median
-!HISTORY_MSG_418;Retinex - Threshold
-!HISTORY_MSG_419;Retinex - Color space
-!HISTORY_MSG_420;Retinex - Histogram - HSL
-!HISTORY_MSG_421;Retinex - Gamma
-!HISTORY_MSG_422;Retinex - Gamma
-!HISTORY_MSG_423;Retinex - Gamma slope
-!HISTORY_MSG_424;Retinex - HL threshold
-!HISTORY_MSG_425;Retinex - Log base
-!HISTORY_MSG_426;Retinex - Hue equalizer
-!HISTORY_MSG_427;Output rendering intent
-!HISTORY_MSG_428;Monitor rendering intent
-!HISTORY_MSG_429;Retinex - Iterations
-!HISTORY_MSG_430;Retinex - Transmission gradient
-!HISTORY_MSG_431;Retinex - Strength gradient
-!HISTORY_MSG_432;Retinex - M - Highlights
-!HISTORY_MSG_433;Retinex - M - Highlights TW
-!HISTORY_MSG_434;Retinex - M - Shadows
-!HISTORY_MSG_435;Retinex - M - Shadows TW
-!HISTORY_MSG_436;Retinex - M - Radius
-!HISTORY_MSG_437;Retinex - M - Method
-!HISTORY_MSG_438;Retinex - M - Equalizer
-!HISTORY_MSG_439;Retinex - Process
-!HISTORY_MSG_440;CbDL - Method
-!HISTORY_MSG_441;Retinex - Gain transmission
-!HISTORY_MSG_442;Retinex - Scale
-!HISTORY_MSG_443;Output black point compensation
-!HISTORY_MSG_444;WB - Temp bias
-!HISTORY_MSG_445;Raw sub-image
-!HISTORY_MSG_449;PS - ISO adaption
-!HISTORY_MSG_452;PS - Show motion
-!HISTORY_MSG_453;PS - Show mask only
-!HISTORY_MSG_457;PS - Check red/blue
-!HISTORY_MSG_462;PS - Check green
-!HISTORY_MSG_464;PS - Blur motion mask
-!HISTORY_MSG_465;PS - Blur radius
-!HISTORY_MSG_468;PS - Fill holes
-!HISTORY_MSG_469;PS - Median
-!HISTORY_MSG_471;PS - Motion correction
-!HISTORY_MSG_472;PS - Smooth transitions
-!HISTORY_MSG_473;PS - Use LMMSE
-!HISTORY_MSG_474;PS - Equalize
-!HISTORY_MSG_475;PS - Equalize channel
-!HISTORY_MSG_476;CAM02 - Temp out
-!HISTORY_MSG_477;CAM02 - Green out
-!HISTORY_MSG_478;CAM02 - Yb out
-!HISTORY_MSG_479;CAM02 - CAT02 adaptation out
-!HISTORY_MSG_480;CAM02 - Automatic CAT02 out
-!HISTORY_MSG_481;CAM02 - Temp scene
-!HISTORY_MSG_482;CAM02 - Green scene
-!HISTORY_MSG_483;CAM02 - Yb scene
-!HISTORY_MSG_484;CAM02 - Auto Yb scene
-!HISTORY_MSG_485;Lens Correction
-!HISTORY_MSG_486;Lens Correction - Camera
-!HISTORY_MSG_487;Lens Correction - Lens
-!HISTORY_MSG_488;Dynamic Range Compression
-!HISTORY_MSG_489;DRC - Detail
-!HISTORY_MSG_490;DRC - Amount
-!HISTORY_MSG_491;White Balance
-!HISTORY_MSG_492;RGB Curves
-!HISTORY_MSG_493;L*a*b* Adjustments
-!HISTORY_MSG_CLAMPOOG;Clip out-of-gamut colors
-!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_AB;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_CHANNEL;CT - Channel
-!HISTORY_MSG_COLORTONING_LABREGION_CHROMATICITYMASK;CT - region C mask
-!HISTORY_MSG_COLORTONING_LABREGION_HUEMASK;CT - H mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESS;CT - Lightness
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESSMASK;CT - L mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIST;CT - List
-!HISTORY_MSG_COLORTONING_LABREGION_MASKBLUR;CT - region mask blur
-!HISTORY_MSG_COLORTONING_LABREGION_OFFSET;CT - region offset
-!HISTORY_MSG_COLORTONING_LABREGION_POWER;CT - region power
-!HISTORY_MSG_COLORTONING_LABREGION_SATURATION;CT - Saturation
-!HISTORY_MSG_COLORTONING_LABREGION_SHOWMASK;CT - region show mask
-!HISTORY_MSG_COLORTONING_LABREGION_SLOPE;CT - region slope
-!HISTORY_MSG_DEHAZE_DEPTH;Dehaze - Depth
-!HISTORY_MSG_DEHAZE_ENABLED;Haze Removal
-!HISTORY_MSG_DEHAZE_SHOW_DEPTH_MAP;Dehaze - Show depth map
-!HISTORY_MSG_DEHAZE_STRENGTH;Dehaze - Strength
-!HISTORY_MSG_DUALDEMOSAIC_AUTO_CONTRAST;Dual demosaic - Auto threshold
-!HISTORY_MSG_DUALDEMOSAIC_CONTRAST;Dual demosaic - Contrast threshold
-!HISTORY_MSG_HISTMATCHING;Auto-matched tone curve
-!HISTORY_MSG_ICM_OUTPUT_PRIMARIES;Output - Primaries
-!HISTORY_MSG_ICM_OUTPUT_TEMP;Output - ICC-v4 illuminant D
-!HISTORY_MSG_ICM_OUTPUT_TYPE;Output - Type
-!HISTORY_MSG_ICM_WORKING_GAMMA;Working - Gamma
-!HISTORY_MSG_ICM_WORKING_SLOPE;Working - Slope
-!HISTORY_MSG_ICM_WORKING_TRC_METHOD;Working - TRC method
-!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
-!HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness
-!HISTORY_MSG_LOCALCONTRAST_ENABLED;Local Contrast
-!HISTORY_MSG_LOCALCONTRAST_LIGHTNESS;Local Contrast - Lightness
-!HISTORY_MSG_LOCALCONTRAST_RADIUS;Local Contrast - Radius
-!HISTORY_MSG_METADATA_MODE;Metadata copy mode
-!HISTORY_MSG_MICROCONTRAST_CONTRAST;Microcontrast - Contrast threshold
-!HISTORY_MSG_PIXELSHIFT_DEMOSAIC;PS - Demosaic method for motion
-!HISTORY_MSG_PREPROCESS_LINEDENOISE_DIRECTION;Line noise filter direction
-!HISTORY_MSG_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!HISTORY_MSG_PRSHARPEN_CONTRAST;PRS - Contrast threshold
-!HISTORY_MSG_RAWCACORR_AUTOIT;Raw CA Correction - Iterations
-!HISTORY_MSG_RAWCACORR_COLORSHIFT;Raw CA Correction - Avoid color shift
-!HISTORY_MSG_RAW_BORDER;Raw border
-!HISTORY_MSG_RESIZE_ALLOWUPSCALING;Resize - Allow upscaling
-!HISTORY_MSG_SHARPENING_BLUR;Sharpening - Blur radius
-!HISTORY_MSG_SHARPENING_CONTRAST;Sharpening - Contrast threshold
-!HISTORY_MSG_SH_COLORSPACE;S/H - Colorspace
-!HISTORY_MSG_SOFTLIGHT_ENABLED;Soft light
-!HISTORY_MSG_SOFTLIGHT_STRENGTH;Soft light - Strength
-!HISTORY_MSG_TM_FATTAL_ANCHOR;DRC - Anchor
-!HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s
-!ICCPROFCREATOR_COPYRIGHT;Copyright:
-!ICCPROFCREATOR_COPYRIGHT_RESET_TOOLTIP;Reset to the default copyright, granted to "RawTherapee, CC0"
-!ICCPROFCREATOR_CUSTOM;Custom
-!ICCPROFCREATOR_DESCRIPTION;Description:
-!ICCPROFCREATOR_DESCRIPTION_ADDPARAM;Append gamma and slope values to the description
-!ICCPROFCREATOR_DESCRIPTION_TOOLTIP;Leave empty to set the default description.
-!ICCPROFCREATOR_GAMMA;Gamma
-!ICCPROFCREATOR_ICCVERSION;ICC version:
-!ICCPROFCREATOR_ILL;Illuminant:
-!ICCPROFCREATOR_ILL_41;D41
-!ICCPROFCREATOR_ILL_50;D50
-!ICCPROFCREATOR_ILL_55;D55
-!ICCPROFCREATOR_ILL_60;D60
-!ICCPROFCREATOR_ILL_65;D65
-!ICCPROFCREATOR_ILL_80;D80
-!ICCPROFCREATOR_ILL_DEF;Default
-!ICCPROFCREATOR_ILL_INC;StdA 2856K
-!ICCPROFCREATOR_ILL_TOOLTIP;You can only set the illuminant for ICC v4 profiles.
-!ICCPROFCREATOR_PRIMARIES;Primaries:
-!ICCPROFCREATOR_PRIM_ACESP0;ACES AP0
-!ICCPROFCREATOR_PRIM_ACESP1;ACES AP1
-!ICCPROFCREATOR_PRIM_ADOBE;Adobe RGB (1998)
-!ICCPROFCREATOR_PRIM_BEST;BestRGB
-!ICCPROFCREATOR_PRIM_BETA;BetaRGB
-!ICCPROFCREATOR_PRIM_BLUX;Blue X
-!ICCPROFCREATOR_PRIM_BLUY;Blue Y
-!ICCPROFCREATOR_PRIM_BRUCE;BruceRGB
-!ICCPROFCREATOR_PRIM_GREX;Green X
-!ICCPROFCREATOR_PRIM_GREY;Green Y
-!ICCPROFCREATOR_PRIM_PROPH;Prophoto
-!ICCPROFCREATOR_PRIM_REC2020;Rec2020
-!ICCPROFCREATOR_PRIM_REDX;Red X
-!ICCPROFCREATOR_PRIM_REDY;Red Y
-!ICCPROFCREATOR_PRIM_SRGB;sRGB
-!ICCPROFCREATOR_PRIM_TOOLTIP;You can only set custom primaries for ICC v4 profiles.
-!ICCPROFCREATOR_PRIM_WIDEG;Widegamut
-!ICCPROFCREATOR_PROF_V2;ICC v2
-!ICCPROFCREATOR_PROF_V4;ICC v4
-!ICCPROFCREATOR_SAVEDIALOG_TITLE;Save ICC profile as...
-!ICCPROFCREATOR_SLOPE;Slope
-!ICCPROFCREATOR_TRC_PRESET;Tone response curve:
-!IPTCPANEL_CATEGORYHINT;Identifies the subject of the image in the opinion of the provider.
-!IPTCPANEL_CITYHINT;Enter the name of the city pictured in this image.
-!IPTCPANEL_COPYRIGHT;Copyright notice
-!IPTCPANEL_COPYRIGHTHINT;Enter a Notice on the current owner of the Copyright for this image, such as ©2008 Jane Doe.
-!IPTCPANEL_COUNTRYHINT;Enter the name of the country pictured in this image.
-!IPTCPANEL_CREATOR;Creator
-!IPTCPANEL_CREATORHINT;Enter the name of the person that created this image.
-!IPTCPANEL_CREATORJOBTITLE;Creator's job title
-!IPTCPANEL_CREATORJOBTITLEHINT;Enter the Job Title of the person listed in the Creator field.
-!IPTCPANEL_DATECREATEDHINT;Enter the Date the image was taken.
-!IPTCPANEL_DESCRIPTION;Description
-!IPTCPANEL_DESCRIPTIONHINT;Enter a "caption" describing the who, what, and why of what is happening in this image, this might include names of people, and/or their role in the action that is taking place within the image.
-!IPTCPANEL_DESCRIPTIONWRITER;Description writer
-!IPTCPANEL_DESCRIPTIONWRITERHINT;Enter the name of the person involved in writing, editing or correcting the description of the image.
-!IPTCPANEL_HEADLINEHINT;Enter a brief publishable synopsis or summary of the contents of the image.
-!IPTCPANEL_INSTRUCTIONSHINT;Enter information about embargoes, or other restrictions not covered by the Copyright field.
-!IPTCPANEL_KEYWORDSHINT;Enter any number of keywords, terms or phrases used to express the subject matter in the image.
-!IPTCPANEL_PROVINCE;Province or state
-!IPTCPANEL_PROVINCEHINT;Enter the name of the province or state pictured in this image.
-!IPTCPANEL_SOURCEHINT;Enter or edit the name of a person or party who has a role in the content supply chain, such as a person or entity from whom you received this image from.
-!IPTCPANEL_SUPPCATEGORIES;Supplemental categories
-!IPTCPANEL_SUPPCATEGORIESHINT;Further refines the subject of the image.
-!IPTCPANEL_TITLEHINT;Enter a short verbal and human readable name for the image, this may be the file name.
-!IPTCPANEL_TRANSREFERENCE;Job ID
-!IPTCPANEL_TRANSREFERENCEHINT;Enter a number or identifier needed for workflow control or tracking.
-!MAIN_BUTTON_FULLSCREEN;Fullscreen
-!MAIN_BUTTON_ICCPROFCREATOR;ICC Profile Creator
-!MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4
-!MAIN_BUTTON_NAVPREV_TOOLTIP;Navigate to the previous image relative to image opened in the Editor.\nShortcut: Shift-F3\n\nTo navigate to the previous image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F3
-!MAIN_BUTTON_NAVSYNC_TOOLTIP;Synchronize the File Browser or Filmstrip with the Editor to reveal the thumbnail of the currently opened image, and clear any active filters.\nShortcut: x\n\nAs above, but without clearing active filters:\nShortcut: y\n(Note that the thumbnail of the opened image will not be shown if filtered out).
-!MAIN_BUTTON_PUTTOQUEUE_TOOLTIP;Put current image to processing queue.\nShortcut: Ctrl+b
-!MAIN_BUTTON_SAVE_TOOLTIP;Save current image.\nShortcut: Ctrl+s\nSave current profile (.pp3).\nShortcut: Ctrl+Shift+s
-!MAIN_BUTTON_SENDTOEDITOR_TOOLTIP;Edit current image in external editor.\nShortcut: Ctrl+e
-!MAIN_BUTTON_SHOWHIDESIDEPANELS_TOOLTIP;Show/hide all side panels.\nShortcut: m
-!MAIN_BUTTON_UNFULLSCREEN;Exit fullscreen
-!MAIN_FRAME_BATCHQUEUE_TOOLTIP;Processing queue.\nShortcut: Ctrl-F3
-!MAIN_FRAME_EDITOR;Editor
-!MAIN_FRAME_EDITOR_TOOLTIP;Editor.\nShortcut: Ctrl-F4
-!MAIN_FRAME_FILEBROWSER_TOOLTIP;File browser.\nShortcut: Ctrl-F2
-!MAIN_FRAME_PLACES_DEL;Remove
-!MAIN_MSG_EMPTYFILENAME;Filename unspecified!
-!MAIN_MSG_IMAGEUNPROCESSED;This command requires all selected images to be queue-processed first.
-!MAIN_MSG_OPERATIONCANCELLED;Operation cancelled
-!MAIN_MSG_PATHDOESNTEXIST;The path\n\n%1\n\ndoes not exist. Please set a correct path in Preferences.
-!MAIN_MSG_SETPATHFIRST;You first have to set a target path in Preferences in order to use this function!
-!MAIN_MSG_TOOMANYOPENEDITORS;Too many open editors.\nPlease close an editor to continue.
-!MAIN_MSG_WRITEFAILED;Failed to write\n"%1"\n\nMake sure that the folder exists and that you have write permission to it.
-!MAIN_TAB_ADVANCED;Advanced
-!MAIN_TAB_ADVANCED_TOOLTIP;Shortcut: Alt-w
-!MAIN_TAB_COLOR_TOOLTIP;Shortcut: Alt-c
-!MAIN_TAB_DETAIL_TOOLTIP;Shortcut: Alt-d
-!MAIN_TAB_EXPORT; Fast Export
-!MAIN_TAB_EXPOSURE_TOOLTIP;Shortcut: Alt-e
-!MAIN_TAB_FAVORITES;Favorites
-!MAIN_TAB_FAVORITES_TOOLTIP;Shortcut: Alt-u
-!MAIN_TAB_INSPECT; Inspect
-!MAIN_TAB_METADATA_TOOLTIP;Shortcut: Alt-m
-!MAIN_TAB_RAW;Raw
-!MAIN_TAB_RAW_TOOLTIP;Shortcut: Alt-r
-!MAIN_TAB_TRANSFORM_TOOLTIP;Shortcut: Alt-t
-!MAIN_TOOLTIP_BACKCOLOR0;Background color of the preview: theme-based\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR1;Background color of the preview: black\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR2;Background color of the preview: white\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR3;Background color of the preview: middle grey\nShortcut: 9
-!MAIN_TOOLTIP_BEFOREAFTERLOCK;Lock / Unlock the Before view\n\nLock: keep the Before view unchanged.\nUseful to evaluate the cumulative effect of multiple tools.\nAdditionally, comparisons can be made to any state in the History.\n\nUnlock: the Before view will follow the After view one step behind, showing the image before the effect of the currently used tool.
-!MAIN_TOOLTIP_PREVIEWB;Preview the blue channel.\nShortcut: b
-!MAIN_TOOLTIP_PREVIEWFOCUSMASK;Preview the focus mask.\nShortcut: Shift-f\n\nMore accurate on images with shallow depth of field, low noise and at higher zoom levels.\nZoom out to 10-30% to improve detection accuracy on noisy images.
-!MAIN_TOOLTIP_PREVIEWG;Preview the green channel.\nShortcut: g
-!MAIN_TOOLTIP_PREVIEWL;Preview the luminosity.\nShortcut: v\n\n0.299*R + 0.587*G + 0.114*B
-!MAIN_TOOLTIP_PREVIEWR;Preview the red channel.\nShortcut: r
-!MAIN_TOOLTIP_PREVIEWSHARPMASK;Preview the sharpening contrast mask.\nShortcut: p\n\nOnly works when sharpening is enabled and zoom >= 100%.
-!MAIN_TOOLTIP_SHOWHIDELP1;Show/Hide the left panel.\nShortcut: l
-!MAIN_TOOLTIP_SHOWHIDERP1;Show/Hide the right panel.\nShortcut: Alt-l
-!MAIN_TOOLTIP_SHOWHIDETP1;Show/Hide the top panel.\nShortcut: Shift-l
-!MAIN_TOOLTIP_THRESHOLD;Threshold
-!MONITOR_PROFILE_SYSTEM;System default
-!NAVIGATOR_B;B:
-!NAVIGATOR_G;G:
-!NAVIGATOR_H;H:
-!NAVIGATOR_LAB_A;a*:
-!NAVIGATOR_LAB_B;b*:
-!NAVIGATOR_LAB_L;L*:
-!NAVIGATOR_NA; --
-!NAVIGATOR_R;R:
-!NAVIGATOR_S;S:
-!NAVIGATOR_V;V:
-!NAVIGATOR_XY_FULL;Width: %1, Height: %2
-!NAVIGATOR_XY_NA;x: --, y: --
-!OPTIONS_BUNDLED_MISSING;The bundled profile "%1" could not be found!\n\nYour installation could be damaged.\n\nDefault internal values will be used instead.
-!OPTIONS_DEFIMG_MISSING;The default profile for non-raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!OPTIONS_DEFRAW_MISSING;The default profile for raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!PARTIALPASTE_ADVANCEDGROUP;Advanced Settings
-!PARTIALPASTE_CHANNELMIXER;Channel mixer
-!PARTIALPASTE_CHANNELMIXERBW;Black-and-white
-!PARTIALPASTE_COLORAPP;CIECAM02
-!PARTIALPASTE_COLORTONING;Color toning
-!PARTIALPASTE_COMMONTRANSFORMPARAMS;Auto-fill
-!PARTIALPASTE_DARKFRAMEAUTOSELECT;Dark-frame auto-selection
-!PARTIALPASTE_DARKFRAMEFILE;Dark-frame file
-!PARTIALPASTE_DEFRINGE;Defringe
-!PARTIALPASTE_DEHAZE;Haze removal
-!PARTIALPASTE_DETAILGROUP;Detail Settings
-!PARTIALPASTE_DIRPYRDENOISE;Noise reduction
-!PARTIALPASTE_DIRPYREQUALIZER;Contrast by detail levels
-!PARTIALPASTE_EPD;Tone mapping
-!PARTIALPASTE_EQUALIZER;Wavelet levels
-!PARTIALPASTE_EVERYTHING;Everything
-!PARTIALPASTE_FILMSIMULATION;Film simulation
-!PARTIALPASTE_FLATFIELDAUTOSELECT;Flat-field auto-selection
-!PARTIALPASTE_FLATFIELDBLURRADIUS;Flat-field blur radius
-!PARTIALPASTE_FLATFIELDBLURTYPE;Flat-field blur type
-!PARTIALPASTE_FLATFIELDCLIPCONTROL;Flat-field clip control
-!PARTIALPASTE_FLATFIELDFILE;Flat-field file
-!PARTIALPASTE_GRADIENT;Graduated filter
-!PARTIALPASTE_HSVEQUALIZER;HSV equalizer
-!PARTIALPASTE_IMPULSEDENOISE;Impulse noise reduction
-!PARTIALPASTE_LABCURVE;L*a*b* adjustments
-!PARTIALPASTE_LENSPROFILE;Profiled lens correction
-!PARTIALPASTE_LOCALCONTRAST;Local contrast
-!PARTIALPASTE_METADATA;Metadata mode
-!PARTIALPASTE_PCVIGNETTE;Vignette filter
-!PARTIALPASTE_PERSPECTIVE;Perspective
-!PARTIALPASTE_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!PARTIALPASTE_PREPROCESS_GREENEQUIL;Green equilibration
-!PARTIALPASTE_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!PARTIALPASTE_PREPROCESS_LINEDENOISE;Line noise filter
-!PARTIALPASTE_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!PARTIALPASTE_PRSHARPENING;Post-resize sharpening
-!PARTIALPASTE_RAWCACORR_AUTO;CA auto-correction
-!PARTIALPASTE_RAWCACORR_AVOIDCOLORSHIFT;CA avoid color shift
-!PARTIALPASTE_RAWCACORR_CAREDBLUE;CA red & blue
-!PARTIALPASTE_RAWEXPOS_BLACK;Black levels
-!PARTIALPASTE_RAWEXPOS_LINEAR;White point correction
-!PARTIALPASTE_RAWGROUP;Raw Settings
-!PARTIALPASTE_RAW_BORDER;Raw border
-!PARTIALPASTE_RAW_DCBENHANCE;DCB enhancement
-!PARTIALPASTE_RAW_DCBITERATIONS;DCB iterations
-!PARTIALPASTE_RAW_DMETHOD;Demosaic method
-!PARTIALPASTE_RAW_FALSECOLOR;False color suppression
-!PARTIALPASTE_RAW_IMAGENUM;Sub-image
-!PARTIALPASTE_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!PARTIALPASTE_RAW_PIXELSHIFT;Pixel Shift
-!PARTIALPASTE_RETINEX;Retinex
-!PARTIALPASTE_RGBCURVES;RGB curves
-!PARTIALPASTE_SHARPENEDGE;Edges
-!PARTIALPASTE_SHARPENMICRO;Microcontrast
-!PARTIALPASTE_SOFTLIGHT;Soft light
-!PARTIALPASTE_TM_FATTAL;Dynamic range compression
-!PARTIALPASTE_VIBRANCE;Vibrance
-!PREFERENCES_ADD;Add
-!PREFERENCES_APPEARANCE;Appearance
-!PREFERENCES_APPEARANCE_COLORPICKERFONT;Color picker font
-!PREFERENCES_APPEARANCE_CROPMASKCOLOR;Crop mask color
-!PREFERENCES_APPEARANCE_MAINFONT;Main font
-!PREFERENCES_APPEARANCE_NAVGUIDECOLOR;Navigator guide color
-!PREFERENCES_APPEARANCE_THEME;Theme
-!PREFERENCES_AUTOMONPROFILE;Use operating system's main monitor color profile
-!PREFERENCES_AUTOSAVE_TP_OPEN;Save tool collapsed/expanded state on exit
-!PREFERENCES_BATCH_PROCESSING;Batch Processing
-!PREFERENCES_BEHADDALL;All to 'Add'
-!PREFERENCES_BEHADDALLHINT;Set all parameters to the Add mode.\nAdjustments of parameters in the batch tool panel will be deltas to the stored values.
-!PREFERENCES_BEHAVIOR;Behavior
-!PREFERENCES_BEHSETALL;All to 'Set'
-!PREFERENCES_BEHSETALLHINT;Set all parameters to the Set mode.\nAdjustments of parameters in the batch tool panel will be absolute, the actual values will be displayed.
-!PREFERENCES_BLACKBODY;Tungsten
-!PREFERENCES_CACHECLEAR;Clear
-!PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
-!PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
-!PREFERENCES_CACHECLEAR_ONLYPROFILES;Clear only cached processing profiles:
-!PREFERENCES_CACHECLEAR_SAFETY;Only files in the cache are cleared. Processing profiles stored alongside the source images are not touched.
-!PREFERENCES_CHUNKSIZES;Tiles per thread
-!PREFERENCES_CHUNKSIZE_RAW_AMAZE;AMaZE demosaic
-!PREFERENCES_CHUNKSIZE_RAW_CA;Raw CA correction
-!PREFERENCES_CHUNKSIZE_RAW_RCD;RCD demosaic
-!PREFERENCES_CHUNKSIZE_RAW_XT;Xtrans demosaic
-!PREFERENCES_CHUNKSIZE_RGB;RGB processing
-!PREFERENCES_CLUTSCACHE;HaldCLUT Cache
-!PREFERENCES_CLUTSCACHE_LABEL;Maximum number of cached CLUTs
-!PREFERENCES_CLUTSDIR;HaldCLUT directory
-!PREFERENCES_CMMBPC;Black point compensation
-!PREFERENCES_CROP;Crop Editing
-!PREFERENCES_CROP_AUTO_FIT;Automatically zoom to fit the crop
-!PREFERENCES_CROP_GUIDES;Guides shown when not editing the crop
-!PREFERENCES_CROP_GUIDES_FRAME;Frame
-!PREFERENCES_CROP_GUIDES_FULL;Original
-!PREFERENCES_CROP_GUIDES_NONE;None
-!PREFERENCES_CURVEBBOXPOS;Position of curve copy & paste buttons
-!PREFERENCES_CURVEBBOXPOS_ABOVE;Above
-!PREFERENCES_CURVEBBOXPOS_BELOW;Below
-!PREFERENCES_CURVEBBOXPOS_LEFT;Left
-!PREFERENCES_CURVEBBOXPOS_RIGHT;Right
-!PREFERENCES_CUSTPROFBUILD;Custom Processing Profile Builder
-!PREFERENCES_CUSTPROFBUILDHINT;Executable (or script) file called when a new initial processing profile should be generated for an image.\n\nThe path of the communication file (*.ini style, a.k.a. "Keyfile") is added as a command line parameter. It contains various parameters required for the scripts and image Exif to allow a rules-based processing profile generation.\n\nWARNING: You are responsible for using double quotes where necessary if you're using paths containing spaces.
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys format
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
-!PREFERENCES_CUSTPROFBUILDPATH;Executable path
-!PREFERENCES_D50;Settings in main menu
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_D55;5500K
-!PREFERENCES_D60;6000K
-!PREFERENCES_D65;6500K
-!PREFERENCES_DARKFRAMEFOUND;Found
-!PREFERENCES_DARKFRAMESHOTS;shots
-!PREFERENCES_DARKFRAMETEMPLATES;templates
-!PREFERENCES_DIRDARKFRAMES;Dark-frames directory
-!PREFERENCES_DIRECTORIES;Directories
-!PREFERENCES_EDITORCMDLINE;Custom command line
-!PREFERENCES_EDITORLAYOUT;Editor layout
-!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_FLATFIELDFOUND;Found
-!PREFERENCES_FLATFIELDSDIR;Flat-fields directory
-!PREFERENCES_FLATFIELDSHOTS;shots
-!PREFERENCES_FLATFIELDTEMPLATES;templates
-!PREFERENCES_FLUOF2;Fluorescent F2
-!PREFERENCES_FLUOF7;Fluorescent F7
-!PREFERENCES_FLUOF11;Fluorescent F11
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY;Output device's Yb luminance (%)
-!PREFERENCES_GREY05;Yb=05 CIE L#30
-!PREFERENCES_GREY10;Yb=10 CIE L#40
-!PREFERENCES_GREY15;Yb=15 CIE L#45
-!PREFERENCES_GREY18;Settings in main menu
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREY23;Yb=23 CIE L#55
-!PREFERENCES_GREY30;Yb=30 CIE L#60
-!PREFERENCES_GREY40;Yb=40 CIE L#70
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram in left panel
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
-!PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
-!PREFERENCES_INSPECT_LABEL;Inspect
-!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
-!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
-!PREFERENCES_INTERNALTHUMBIFUNTOUCHED;Show embedded JPEG thumbnail if raw is unedited
-!PREFERENCES_LANG;Language
-!PREFERENCES_LANGAUTODETECT;Use system language
-!PREFERENCES_MAXRECENTFOLDERS;Maximum number of recent folders
-!PREFERENCES_MENUGROUPEXTPROGS;Group "Open with"
-!PREFERENCES_MENUGROUPFILEOPERATIONS;Group "File operations"
-!PREFERENCES_MENUGROUPLABEL;Group "Color label"
-!PREFERENCES_MENUGROUPPROFILEOPERATIONS;Group "Processing profile operations"
-!PREFERENCES_MENUGROUPRANK;Group "Rank"
-!PREFERENCES_MENUOPTIONS;Context Menu Options
-!PREFERENCES_METADATA;Metadata
-!PREFERENCES_MONINTENT;Default rendering intent
-!PREFERENCES_MONITOR;Monitor
-!PREFERENCES_MONPROFILE;Default color profile
-!PREFERENCES_MONPROFILE_WARNOSX;Due to MacOS limitations, only sRGB is supported.
-!PREFERENCES_MULTITAB;Multiple Editor Tabs Mode
-!PREFERENCES_MULTITABDUALMON;Multiple Editor Tabs In Own Window Mode
-!PREFERENCES_NAVIGATIONFRAME;Navigation
-!PREFERENCES_OVERLAY_FILENAMES;Overlay filenames on thumbnails in the file browser
-!PREFERENCES_OVERLAY_FILENAMES_FILMSTRIP;Overlay filenames on thumbnails in the editor pannel
-!PREFERENCES_OVERWRITEOUTPUTFILE;Overwrite existing output files
-!PREFERENCES_PANFACTORLABEL;Pan rate amplification
-!PREFERENCES_PARSEDEXTDOWNHINT;Move selected extension down in the list.
-!PREFERENCES_PARSEDEXTUPHINT;Move selected extension up in the list.
-!PREFERENCES_PERFORMANCE_MEASURE;Measure
-!PREFERENCES_PERFORMANCE_MEASURE_HINT;Logs processing times in console
-!PREFERENCES_PERFORMANCE_THREADS;Threads
-!PREFERENCES_PERFORMANCE_THREADS_LABEL;Maximum number of threads for Noise Reduction and Wavelet Levels (0 = Automatic)
-!PREFERENCES_PREVDEMO;Preview Demosaic Method
-!PREFERENCES_PREVDEMO_FAST;Fast
-!PREFERENCES_PREVDEMO_LABEL;Demosaicing method used for the preview at <100% zoom:
-!PREFERENCES_PREVDEMO_SIDECAR;As in PP3
-!PREFERENCES_PRINTER;Printer (Soft-Proofing)
-!PREFERENCES_PROFILESAVEBOTH;Save processing profile both to the cache and next to the input file
-!PREFERENCES_PROFILESAVELOCATION;Processing profile saving location
-!PREFERENCES_PROFILE_NONE;None
-!PREFERENCES_PROPERTY;Property
-!PREFERENCES_PRTINTENT;Rendering intent
-!PREFERENCES_PRTPROFILE;Color profile
-!PREFERENCES_REMEMBERZOOMPAN;Remember zoom % and pan offset
-!PREFERENCES_REMEMBERZOOMPAN_TOOLTIP;Remember the zoom % and pan offset of the current image when opening a new image.\n\nThis option only works in "Single Editor Tab Mode" and when "Demosaicing method used for the preview at <100% zoom" is set to "As in PP3".
-!PREFERENCES_SAVE_TP_OPEN_NOW;Save tool collapsed/expanded state now
-!PREFERENCES_SERIALIZE_TIFF_READ;TIFF Read Settings
-!PREFERENCES_SERIALIZE_TIFF_READ_LABEL;Serialize reading of TIFF files
-!PREFERENCES_SERIALIZE_TIFF_READ_TOOLTIP;Enabling this option when working with folders containing uncompressed TIFF files can increase performance of thumbnail generation.
-!PREFERENCES_SET;Set
-!PREFERENCES_SHOWEXPOSURECOMPENSATION;Append exposure compensation
-!PREFERENCES_SHOWFILMSTRIPTOOLBAR;Show Filmstrip toolbar
-!PREFERENCES_SINGLETAB;Single Editor Tab Mode
-!PREFERENCES_SINGLETABVERTAB;Single Editor Tab Mode, Vertical Tabs
-!PREFERENCES_SND_BATCHQUEUEDONE;Queue processing done
-!PREFERENCES_SND_HELP;Enter a full file path to set a sound, or leave blank for no sound.\nFor system sounds on Windows use "SystemDefault", "SystemAsterisk" etc., and on Linux use "complete", "window-attention" etc.
-!PREFERENCES_SND_LNGEDITPROCDONE;Editor processing done
-!PREFERENCES_SND_THRESHOLDSECS;After seconds
-!PREFERENCES_TAB_DYNAMICPROFILE;Dynamic Profile Rules
-!PREFERENCES_TAB_PERFORMANCE;Performance
-!PREFERENCES_TAB_SOUND;Sounds
-!PREFERENCES_THUMBNAIL_INSPECTOR_JPEG;Embedded JPEG preview
-!PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TP_LABEL;Tool panel:
-!PREFERENCES_TP_VSCROLLBAR;Hide vertical scrollbar
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
-!PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-!PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
-!PREFERENCES_WORKFLOW;Layout
-!PROFILEPANEL_COPYPPASTE;Parameters to copy
-!PROFILEPANEL_GLOBALPROFILES;Bundled profiles
-!PROFILEPANEL_LOADPPASTE;Parameters to load
-!PROFILEPANEL_MODE_TIP;Processing profile fill mode.\n\nButton pressed: partial profiles will be converted to full profiles; the missing values will be replaced with hard-coded defaults.\n\nButton released: profiles will be applied as they are, altering only those values which they contain.
-!PROFILEPANEL_MYPROFILES;My profiles
-!PROFILEPANEL_PASTEPPASTE;Parameters to paste
-!PROFILEPANEL_PDYNAMIC;Dynamic
-!PROFILEPANEL_PINTERNAL;Neutral
-!PROFILEPANEL_SAVEPPASTE;Parameters to save
-!PROGRESSBAR_DECODING;Decoding...
-!PROGRESSBAR_GREENEQUIL;Green equilibration...
-!PROGRESSBAR_HLREC;Highlight reconstruction...
-!PROGRESSBAR_HOTDEADPIXELFILTER;Hot/dead pixel filter...
-!PROGRESSBAR_LINEDENOISE;Line noise filter...
-!PROGRESSBAR_LOADINGTHUMBS;Loading thumbnails...
-!PROGRESSBAR_NOIMAGES;No images found
-!PROGRESSBAR_PROCESSING_PROFILESAVED;Processing profile saved
-!PROGRESSBAR_RAWCACORR;Raw CA correction...
-!PROGRESSBAR_SNAPSHOT_ADDED;Snapshot added
-!PROGRESSDLG_PROFILECHANGEDINBROWSER;Processing profile changed in browser
-!QINFO_FRAMECOUNT;%2 frames
-!QINFO_HDR;HDR / %2 frame(s)
-!QINFO_PIXELSHIFT;Pixel Shift / %2 frame(s)
-!SAMPLEFORMAT_0;Unknown data format
-!SAMPLEFORMAT_1;8-bit unsigned
-!SAMPLEFORMAT_2;16-bit unsigned
-!SAMPLEFORMAT_4;24-bit LogLuv
-!SAMPLEFORMAT_8;32-bit LogLuv
-!SAMPLEFORMAT_16;16-bit floating-point
-!SAMPLEFORMAT_32;24-bit floating-point
-!SAMPLEFORMAT_64;32-bit floating-point
-!SAVEDLG_AUTOSUFFIX;Automatically add a suffix if the file already exists
-!SAVEDLG_FILEFORMAT_FLOAT; floating-point
-!SAVEDLG_FORCEFORMATOPTS;Force saving options
-!SAVEDLG_SUBSAMP;Subsampling
-!SAVEDLG_SUBSAMP_1;Best compression
-!SAVEDLG_SUBSAMP_2;Balanced
-!SAVEDLG_SUBSAMP_3;Best quality
-!SAVEDLG_SUBSAMP_TOOLTIP;Best compression:\nJ:a:b 4:2:0\nh/v 2/2\nChroma halved horizontally and vertically.\n\nBalanced:\nJ:a:b 4:2:2\nh/v 2/1\nChroma halved horizontally.\n\nBest quality:\nJ:a:b 4:4:4\nh/v 1/1\nNo chroma subsampling.
-!SAVEDLG_TIFFUNCOMPRESSED;Uncompressed TIFF
-!SAVEDLG_WARNFILENAME;File will be named
-!SHCSELECTOR_TOOLTIP;Click right mouse button to reset the position of those 3 sliders.
-!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
-!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!THRESHOLDSELECTOR_B;Bottom
-!THRESHOLDSELECTOR_BL;Bottom-left
-!THRESHOLDSELECTOR_BR;Bottom-right
-!THRESHOLDSELECTOR_HINT;Hold the Shift key to move individual control points.
-!THRESHOLDSELECTOR_T;Top
-!THRESHOLDSELECTOR_TL;Top-left
-!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
-!TP_BWMIX_ALGO;Algorithm OYCPM
-!TP_BWMIX_ALGO_LI;Linear
-!TP_BWMIX_ALGO_SP;Special effects
-!TP_BWMIX_ALGO_TOOLTIP;Linear: will produce a normal linear response.\nSpecial effects: will produce special effects by mixing channels non-linearly.
-!TP_BWMIX_AUTOCH;Auto
-!TP_BWMIX_CC_ENABLED;Adjust complementary color
-!TP_BWMIX_CC_TOOLTIP;Enable to allow automatic adjustment of complementary colors in ROYGCBPM mode.
-!TP_BWMIX_CHANNEL;Luminance equalizer
-!TP_BWMIX_CURVEEDITOR1;'Before' curve
-!TP_BWMIX_CURVEEDITOR2;'After' curve
-!TP_BWMIX_CURVEEDITOR_AFTER_TOOLTIP;Tone curve, after B&W conversion, at the end of treatment.
-!TP_BWMIX_CURVEEDITOR_BEFORE_TOOLTIP;Tone curve, just before B&W conversion.\nMay take into account the color components.
-!TP_BWMIX_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H).\nPay attention to extreme values as they may cause artifacts.
-!TP_BWMIX_FILTER;Color Filter
-!TP_BWMIX_FILTER_BLUE;Blue
-!TP_BWMIX_FILTER_BLUEGREEN;Blue-Green
-!TP_BWMIX_FILTER_GREEN;Green
-!TP_BWMIX_FILTER_GREENYELLOW;Green-Yellow
-!TP_BWMIX_FILTER_NONE;None
-!TP_BWMIX_FILTER_PURPLE;Purple
-!TP_BWMIX_FILTER_RED;Red
-!TP_BWMIX_FILTER_REDYELLOW;Red-Yellow
-!TP_BWMIX_FILTER_TOOLTIP;The color filter simulates shots taken with a colored filter placed in front of the lens. Colored filters reduce the transmission of specific color ranges and therefore affect their lightness. E.g. a red filter darkens blue skies.
-!TP_BWMIX_FILTER_YELLOW;Yellow
-!TP_BWMIX_GAMMA;Gamma Correction
-!TP_BWMIX_GAM_TOOLTIP;Correct gamma for each RGB channel.
-!TP_BWMIX_LABEL;Black-and-White
-!TP_BWMIX_MET;Method
-!TP_BWMIX_MET_CHANMIX;Channel Mixer
-!TP_BWMIX_MET_DESAT;Desaturation
-!TP_BWMIX_MET_LUMEQUAL;Luminance Equalizer
-!TP_BWMIX_MIXC;Channel Mixer
-!TP_BWMIX_NEUTRAL;Reset
-!TP_BWMIX_RGBLABEL;R: %1%% G: %2%% B: %3%% Total: %4%%
-!TP_BWMIX_RGBLABEL_HINT;Final RGB factors that take care of all the mixer options.\n"Total" displays the sum of the RGB values:\n- always 100% in relative mode\n- higher (lighter) or lower (darker) than 100% in absolute mode.
-!TP_BWMIX_RGB_TOOLTIP;Mix the RGB channels. Use presets for guidance.\nPay attention to negative values that may cause artifacts or erratic behavior.
-!TP_BWMIX_SETTING;Presets
-!TP_BWMIX_SETTING_TOOLTIP;Different presets (film, landscape, etc.) or manual Channel Mixer settings.
-!TP_BWMIX_SET_HIGHCONTAST;High contrast
-!TP_BWMIX_SET_HIGHSENSIT;High Sensitivity
-!TP_BWMIX_SET_HYPERPANCHRO;Hyper Panchromatic
-!TP_BWMIX_SET_INFRARED;Infrared
-!TP_BWMIX_SET_LANDSCAPE;Landscape
-!TP_BWMIX_SET_LOWSENSIT;Low Sensitivity
-!TP_BWMIX_SET_LUMINANCE;Luminance
-!TP_BWMIX_SET_NORMCONTAST;Normal Contrast
-!TP_BWMIX_SET_ORTHOCHRO;Orthochromatic
-!TP_BWMIX_SET_PANCHRO;Panchromatic
-!TP_BWMIX_SET_PORTRAIT;Portrait
-!TP_BWMIX_SET_RGBABS;Absolute RGB
-!TP_BWMIX_SET_RGBREL;Relative RGB
-!TP_BWMIX_SET_ROYGCBPMABS;Absolute ROYGCBPM
-!TP_BWMIX_SET_ROYGCBPMREL;Relative ROYGCBPM
-!TP_BWMIX_TCMODE_FILMLIKE;B&W Film-like
-!TP_BWMIX_TCMODE_SATANDVALBLENDING;B&W Saturation and Value Blending
-!TP_BWMIX_TCMODE_STANDARD;B&W Standard
-!TP_BWMIX_TCMODE_WEIGHTEDSTD;B&W Weighted Standard
-!TP_BWMIX_VAL;L
-!TP_CBDL_AFT;After Black-and-White
-!TP_CBDL_BEF;Before Black-and-White
-!TP_CBDL_METHOD;Process located
-!TP_CBDL_METHOD_TOOLTIP;Choose whether the Contrast by Detail Levels tool is to be positioned after the Black-and-White tool, which makes it work in L*a*b* space, or before it, which makes it work in RGB space.
-!TP_CHROMATABERR_LABEL;Chromatic Aberration
-!TP_COLORAPP_ABSOLUTELUMINANCE;Absolute luminance
-!TP_COLORAPP_ALGO;Algorithm
-!TP_COLORAPP_ALGO_ALL;All
-!TP_COLORAPP_ALGO_JC;Lightness + Chroma (JC)
-!TP_COLORAPP_ALGO_JS;Lightness + Saturation (JS)
-!TP_COLORAPP_ALGO_QM;Brightness + Colorfulness (QM)
-!TP_COLORAPP_ALGO_TOOLTIP;Lets you choose between parameter subsets or all parameters.
-!TP_COLORAPP_BADPIXSL;Hot/bad pixel filter
-!TP_COLORAPP_BADPIXSL_TOOLTIP;Suppression of hot/bad (brightly colored) pixels.\n0 = No effect\n1 = Median\n2 = Gaussian.\nAlternatively, adjust the image to avoid very dark shadows.\n\nThese artifacts are due to limitations of CIECAM02.
-!TP_COLORAPP_BRIGHT;Brightness (Q)
-!TP_COLORAPP_BRIGHT_TOOLTIP;Brightness in CIECAM02 takes into account the white's luminosity and differs from L*a*b* and RGB brightness.
-!TP_COLORAPP_CAT02ADAPTATION_TOOLTIP;When setting manually, values above 65 are recommended.
-!TP_COLORAPP_CHROMA;Chroma (C)
-!TP_COLORAPP_CHROMA_M;Colorfulness (M)
-!TP_COLORAPP_CHROMA_M_TOOLTIP;Colorfulness in CIECAM02 differs from L*a*b* and RGB colorfulness.
-!TP_COLORAPP_CHROMA_S;Saturation (S)
-!TP_COLORAPP_CHROMA_S_TOOLTIP;Saturation in CIECAM02 differs from L*a*b* and RGB saturation.
-!TP_COLORAPP_CHROMA_TOOLTIP;Chroma in CIECAM02 differs from L*a*b* and RGB chroma.
-!TP_COLORAPP_CIECAT_DEGREE;CAT02 adaptation
-!TP_COLORAPP_CONTRAST;Contrast (J)
-!TP_COLORAPP_CONTRAST_Q;Contrast (Q)
-!TP_COLORAPP_CONTRAST_Q_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CONTRAST_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CURVEEDITOR1;Tone curve 1
-!TP_COLORAPP_CURVEEDITOR1_TOOLTIP;Shows the histogram of L* (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of J or Q after CIECAM02.\n\nJ and Q are not shown in the main histogram panel.\n\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_CURVEEDITOR2;Tone curve 2
-!TP_COLORAPP_CURVEEDITOR2_TOOLTIP;Same usage as with the second exposure tone curve.
-!TP_COLORAPP_CURVEEDITOR3;Color curve
-!TP_COLORAPP_CURVEEDITOR3_TOOLTIP;Adjust either chroma, saturation or colorfulness.\n\nShows the histogram of chromaticity (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of C, s or M after CIECAM02.\n\nC, s and M are not shown in the main histogram panel.\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_DATACIE;CIECAM02 output histograms in curves
-!TP_COLORAPP_DATACIE_TOOLTIP;When enabled, histograms in CIECAM02 curves show approximate values/ranges for J or Q, and C, s or M after the CIECAM02 adjustments.\nThis selection does not impact the main histogram panel.\n\nWhen disabled, histograms in CIECAM02 curves show L*a*b* values before CIECAM02 adjustments.
-!TP_COLORAPP_FREE;Free temp+green + CAT02 + [output]
-!TP_COLORAPP_GAMUT;Gamut control (L*a*b*)
-!TP_COLORAPP_GAMUT_TOOLTIP;Allow gamut control in L*a*b* mode.
-!TP_COLORAPP_HUE;Hue (h)
-!TP_COLORAPP_HUE_TOOLTIP;Hue (h) - angle between 0° and 360°.
-!TP_COLORAPP_LABEL;CIE Color Appearance Model 2002
-!TP_COLORAPP_LABEL_CAM02;Image Adjustments
-!TP_COLORAPP_LABEL_SCENE;Scene Conditions
-!TP_COLORAPP_LABEL_VIEWING;Viewing Conditions
-!TP_COLORAPP_LIGHT;Lightness (J)
-!TP_COLORAPP_LIGHT_TOOLTIP;Lightness in CIECAM02 differs from L*a*b* and RGB lightness.
-!TP_COLORAPP_MEANLUMINANCE;Mean luminance (Yb%)
-!TP_COLORAPP_MODEL;WP Model
-!TP_COLORAPP_MODEL_TOOLTIP;White-Point Model.\n\nWB [RT] + [output]: RT's white balance is used for the scene, CIECAM02 is set to D50, and the output device's white balance is set in Viewing Conditions.\n\nWB [RT+CAT02] + [output]: RT's white balance settings are used by CAT02 and the output device's white balance is set in Viewing Conditions.\n\nFree temp+green + CAT02 + [output]: temp and green are selected by the user, the output device's white balance is set in Viewing Conditions.
-!TP_COLORAPP_NEUTRAL;Reset
-!TP_COLORAPP_NEUTRAL_TIP;Reset all sliders checkbox and curves to their default values
-!TP_COLORAPP_RSTPRO;Red & skin-tones protection
-!TP_COLORAPP_RSTPRO_TOOLTIP;Red & skin-tones protection affects both sliders and curves.
-!TP_COLORAPP_SURROUND;Surround
-!TP_COLORAPP_SURROUND_AVER;Average
-!TP_COLORAPP_SURROUND_DARK;Dark
-!TP_COLORAPP_SURROUND_DIM;Dim
-!TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
-!TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\nAverage: Average light environment (standard). The image will not change.\n\nDim: Dim environment (TV). The image will become slighty dark.\n\nDark: Dark environment (projector). The image will become more dark.\n\nExtremly Dark: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
-!TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
-!TP_COLORAPP_TCMODE_CHROMA;Chroma
-!TP_COLORAPP_TCMODE_COLORF;Colorfulness
-!TP_COLORAPP_TCMODE_LABEL1;Curve mode 1
-!TP_COLORAPP_TCMODE_LABEL2;Curve mode 2
-!TP_COLORAPP_TCMODE_LABEL3;Curve chroma mode
-!TP_COLORAPP_TCMODE_LIGHTNESS;Lightness
-!TP_COLORAPP_TCMODE_SATUR;Saturation
-!TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD50 temp=5003\nD55 temp=5503\nD65 temp=6504\nD75 temp=7504
-!TP_COLORAPP_TONECIE;Tone mapping using CIECAM02
-!TP_COLORAPP_TONECIE_TOOLTIP;If this option is disabled, tone mapping is done in L*a*b* space.\nIf this option is enabled, tone mapping is done using CIECAM02.\nThe Tone Mapping tool must be enabled for this setting to take effect.
-!TP_COLORAPP_VIEWING_ABSOLUTELUMINANCE_TOOLTIP;Absolute luminance of the viewing environment\n(usually 16 cd/m²).
-!TP_COLORAPP_WBCAM;WB [RT+CAT02] + [output]
-!TP_COLORAPP_WBRT;WB [RT] + [output]
-!TP_COLORTONING_AB;o C/L
-!TP_COLORTONING_AUTOSAT;Automatic
-!TP_COLORTONING_BALANCE;Balance
-!TP_COLORTONING_BY;o C/L
-!TP_COLORTONING_CHROMAC;Opacity
-!TP_COLORTONING_COLOR;Color
-!TP_COLORTONING_CURVEEDITOR_CL_TOOLTIP;Chroma opacity as a function of luminance oC=f(L)
-!TP_COLORTONING_HIGHLIGHT;Highlights
-!TP_COLORTONING_HUE;Hue
-!TP_COLORTONING_LAB;L*a*b* blending
-!TP_COLORTONING_LABEL;Color Toning
-!TP_COLORTONING_LABGRID;L*a*b* color correction grid
-!TP_COLORTONING_LABGRID_VALUES;HL: a=%1 b=%2\nS: a=%3 b=%4
-!TP_COLORTONING_LABREGIONS;Color correction regions
-!TP_COLORTONING_LABREGION_ABVALUES;a=%1 b=%2
-!TP_COLORTONING_LABREGION_CHANNEL;Channel
-!TP_COLORTONING_LABREGION_CHANNEL_ALL;All
-!TP_COLORTONING_LABREGION_CHANNEL_B;Blue
-!TP_COLORTONING_LABREGION_CHANNEL_G;Green
-!TP_COLORTONING_LABREGION_CHANNEL_R;Red
-!TP_COLORTONING_LABREGION_CHROMATICITYMASK;C
-!TP_COLORTONING_LABREGION_HUEMASK;H
-!TP_COLORTONING_LABREGION_LIGHTNESS;Lightness
-!TP_COLORTONING_LABREGION_LIGHTNESSMASK;L
-!TP_COLORTONING_LABREGION_LIST_TITLE;Correction
-!TP_COLORTONING_LABREGION_MASK;Mask
-!TP_COLORTONING_LABREGION_MASKBLUR;Mask Blur
-!TP_COLORTONING_LABREGION_OFFSET;Offset
-!TP_COLORTONING_LABREGION_POWER;Power
-!TP_COLORTONING_LABREGION_SATURATION;Saturation
-!TP_COLORTONING_LABREGION_SHOWMASK;Show mask
-!TP_COLORTONING_LABREGION_SLOPE;Slope
-!TP_COLORTONING_LUMA;Luminance
-!TP_COLORTONING_LUMAMODE;Preserve luminance
-!TP_COLORTONING_LUMAMODE_TOOLTIP;If enabled, when you change color (red, green, cyan, blue, etc.) the luminance of each pixel is preserved.
-!TP_COLORTONING_METHOD;Method
-!TP_COLORTONING_METHOD_TOOLTIP;"L*a*b* blending", "RGB sliders" and "RGB curves" use interpolated color blending.\n"Color balance (Shadows/Midtones/Highlights)" and "Saturation 2 colors" use direct colors.\n\nThe Black-and-White tool can be enabled when using any color toning method, which allows for color toning.
-!TP_COLORTONING_MIDTONES;Midtones
-!TP_COLORTONING_NEUTRAL;Reset sliders
-!TP_COLORTONING_NEUTRAL_TIP;Reset all values (Shadows, Midtones, Highlights) to default.
-!TP_COLORTONING_OPACITY;Opacity
-!TP_COLORTONING_RGBCURVES;RGB - Curves
-!TP_COLORTONING_RGBSLIDERS;RGB - Sliders
-!TP_COLORTONING_SA;Saturation Protection
-!TP_COLORTONING_SATURATEDOPACITY;Strength
-!TP_COLORTONING_SATURATIONTHRESHOLD;Threshold
-!TP_COLORTONING_SHADOWS;Shadows
-!TP_COLORTONING_SPLITCO;Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITCOCO;Color Balance Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITLR;Saturation 2 colors
-!TP_COLORTONING_STR;Strength
-!TP_COLORTONING_STRENGTH;Strength
-!TP_COLORTONING_TWO2;Special chroma '2 colors'
-!TP_COLORTONING_TWOALL;Special chroma
-!TP_COLORTONING_TWOBY;Special a* and b*
-!TP_COLORTONING_TWOCOLOR_TOOLTIP;Standard chroma:\nLinear response, a* = b*.\n\nSpecial chroma:\nLinear response, a* = b*, but unbound - try under the diagonal.\n\nSpecial a* and b*:\nLinear response unbound with separate curves for a* and b*. Intended for special effects.\n\nSpecial chroma 2 colors:\nMore predictable.
-!TP_COLORTONING_TWOSTD;Standard chroma
-!TP_CROP_GTEPASSPORT;Biometric Passport
-!TP_CROP_GTFRAME;Frame
-!TP_CROP_GTGRID;Grid
-!TP_CROP_GTHARMMEANS;Harmonic Means
-!TP_CROP_GTTRIANGLE1;Golden Triangles 1
-!TP_CROP_GTTRIANGLE2;Golden Triangles 2
-!TP_CROP_PPI;PPI
-!TP_CROP_RESETCROP;Reset
-!TP_CROP_SELECTCROP;Select
-!TP_DARKFRAME_AUTOSELECT;Auto-selection
-!TP_DARKFRAME_LABEL;Dark-Frame
-!TP_DEFRINGE_LABEL;Defringe
-!TP_DEFRINGE_RADIUS;Radius
-!TP_DEFRINGE_THRESHOLD;Threshold
-!TP_DEHAZE_DEPTH;Depth
-!TP_DEHAZE_LABEL;Haze Removal
-!TP_DEHAZE_SHOW_DEPTH_MAP;Show depth map
-!TP_DEHAZE_STRENGTH;Strength
-!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
-!TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
-!TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominance
-!TP_DIRPYRDENOISE_CHROMINANCE_MANUAL;Manual
-!TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Chrominance - Master
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD;Method
-!TP_DIRPYRDENOISE_CHROMINANCE_METHODADVANCED_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nAutomatic multi-zones\nNo preview - works only during saving, but using the "Preview" method by matching the tile size and center to the preview size and center you can get an idea of the expected results.\nThe image is divided into tiles (about 10 to 70 depending on image size) and each tile receives its own chrominance noise reduction settings.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_PMZ;Preview multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW;Preview
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEWRESIDUAL_INFO_TOOLTIP;Displays the remaining noise levels of the part of the image visible in the preview after wavelet.\n\n>300 Very noisy\n100-300 Noisy\n50-100 A little noisy\n<50 Very low noise\n\nBeware, the values will differ between RGB and L*a*b* mode. The RGB values are less accurate because the RGB mode does not completely separate luminance and chrominance.
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_INFO;Preview size=%1, Center: Px=%2 Py=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Preview noise: Mean=%1 High=%2
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= - High= -
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2 Ty=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
-!TP_DIRPYRDENOISE_LABEL;Noise Reduction
-!TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
-!TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
-!TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Detail recovery
-!TP_DIRPYRDENOISE_LUMINANCE_FRAME;Luminance
-!TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminance
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE;Color space
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;For raw images either RGB or L*a*b* methods can be used.\n\nFor non-raw images the L*a*b* method will be used, regardless of the selection.
-!TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
-!TP_DIRPYRDENOISE_MAIN_GAMMA_TOOLTIP;Gamma varies noise reduction strength across the range of tones. Smaller values will target shadows, while larger values will stretch the effect to the brighter tones.
-!TP_DIRPYRDENOISE_MAIN_MODE;Mode
-!TP_DIRPYRDENOISE_MAIN_MODE_AGGRESSIVE;Aggressive
-!TP_DIRPYRDENOISE_MAIN_MODE_CONSERVATIVE;Conservative
-!TP_DIRPYRDENOISE_MAIN_MODE_TOOLTIP;"Conservative" preserves low frequency chroma patterns, while "aggressive" obliterates them.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD;Median method
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_CHROMINANCE;Chroma only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LABEL;Median Filter
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LUMINANCE;Luminance only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_RGB;RGB
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_TOOLTIP;When using the "Luminance only" and "L*a*b*" methods, median filtering will be performed just after the wavelet step in the noise reduction pipeline.\nWhen using the "RGB" mode, it will be performed at the very end of the noise reduction pipeline.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_WEIGHTED;Weighted L* (little) + a*b* (normal)
-!TP_DIRPYRDENOISE_MEDIAN_PASSES;Median iterations
-!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
-!TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
-!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
-!TP_DIRPYRDENOISE_TYPE_3X3;3×3
-!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
-!TP_DIRPYRDENOISE_TYPE_5X5;5×5
-!TP_DIRPYRDENOISE_TYPE_5X5SOFT;5×5 soft
-!TP_DIRPYRDENOISE_TYPE_7X7;7×7
-!TP_DIRPYRDENOISE_TYPE_9X9;9×9
-!TP_DIRPYREQUALIZER_ALGO;Skin Color Range
-!TP_DIRPYREQUALIZER_ALGO_TOOLTIP;Fine: closer to the colors of the skin, minimizing the action on other colors\nLarge: avoid more artifacts.
-!TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts
-!TP_DIRPYREQUALIZER_HUESKIN;Skin hue
-!TP_DIRPYREQUALIZER_HUESKIN_TOOLTIP;This pyramid is for the upper part, so far as the algorithm at its maximum efficiency.\nTo the lower part, the transition zones.\nIf you need to move the area significantly to the left or right - or if there are artifacts: the white balance is incorrect\nYou can slightly reduce the zone to prevent the rest of the image is affected.
-!TP_DIRPYREQUALIZER_LABEL;Contrast by Detail Levels
-!TP_DIRPYREQUALIZER_LUMACOARSEST;Coarsest
-!TP_DIRPYREQUALIZER_LUMACONTRAST_MINUS;Contrast -
-!TP_DIRPYREQUALIZER_LUMACONTRAST_PLUS;Contrast +
-!TP_DIRPYREQUALIZER_LUMAFINEST;Finest
-!TP_DIRPYREQUALIZER_LUMANEUTRAL;Neutral
-!TP_DIRPYREQUALIZER_SKIN;Skin targetting/protection
-!TP_DIRPYREQUALIZER_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_DIRPYREQUALIZER_THRESHOLD;Threshold
-!TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image.
-!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
-!TP_EPD_EDGESTOPPING;Edge stopping
-!TP_EPD_GAMMA;Gamma
-!TP_EPD_LABEL;Tone Mapping
-!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
-!TP_EPD_SCALE;Scale
-!TP_EPD_STRENGTH;Strength
-!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
-!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
-!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
-!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
-!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
-!TP_EXPOSURE_CURVEEDITOR2;Tone curve 2
-!TP_EXPOSURE_CURVEEDITOR2_TOOLTIP;Please refer to the "Exposure > Tone Curves" RawPedia article to learn how to achieve the best results by using two tone curves.
-!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
-!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
-!TP_EXPOSURE_SATURATION;Saturation
-!TP_EXPOSURE_TCMODE_FILMLIKE;Film-like
-!TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1
-!TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2
-!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
-!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual
-!TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending
-!TP_EXPOSURE_TCMODE_STANDARD;Standard
-!TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard
-!TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points
-!TP_EXPOS_WHITEPOINT_LABEL;Raw White Points
-!TP_FILMSIMULATION_LABEL;Film Simulation
-!TP_FILMSIMULATION_SLOWPARSEDIR;RawTherapee is configured to look for Hald CLUT images, which are used for the Film Simulation tool, in a folder which is taking too long to load.\nGo to Preferences > Image Processing > Film Simulation\nto see which folder is being used. You should either point RawTherapee to a folder which contains only Hald CLUT images and nothing more, or to an empty folder if you don't want to use the Film Simulation tool.\n\nRead the Film Simulation article in RawPedia for more information.\n\nDo you want to cancel the scan now?
-!TP_FILMSIMULATION_STRENGTH;Strength
-!TP_FILMSIMULATION_ZEROCLUTSFOUND;Set HaldCLUT directory in Preferences
-!TP_FLATFIELD_AUTOSELECT;Auto-selection
-!TP_FLATFIELD_BLURRADIUS;Blur radius
-!TP_FLATFIELD_BLURTYPE;Blur type
-!TP_FLATFIELD_BT_AREA;Area
-!TP_FLATFIELD_BT_HORIZONTAL;Horizontal
-!TP_FLATFIELD_BT_VERTHORIZ;Vertical + Horizontal
-!TP_FLATFIELD_BT_VERTICAL;Vertical
-!TP_FLATFIELD_CLIPCONTROL;Clip control
-!TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Clip control avoids clipped highlights caused by applying the flat field. If there are already clipped highlights before applying the flat field, clip control can lead to color cast.
-!TP_FLATFIELD_LABEL;Flat-Field
-!TP_GENERAL_11SCALE_TOOLTIP;The effects of this tool are only visible or only accurate at a preview scale of 1:1.
-!TP_GRADIENT_CENTER;Center
-!TP_GRADIENT_CENTER_X;Center X
-!TP_GRADIENT_CENTER_X_TOOLTIP;Shift gradient to the left (negative values) or right (positive values).
-!TP_GRADIENT_CENTER_Y;Center Y
-!TP_GRADIENT_CENTER_Y_TOOLTIP;Shift gradient up (negative values) or down (positive values).
-!TP_GRADIENT_DEGREE;Angle
-!TP_GRADIENT_DEGREE_TOOLTIP;Rotation angle in degrees.
-!TP_GRADIENT_FEATHER;Feather
-!TP_GRADIENT_FEATHER_TOOLTIP;Gradient width in percent of the image diagonal.
-!TP_GRADIENT_LABEL;Graduated Filter
-!TP_GRADIENT_STRENGTH;Strength
-!TP_GRADIENT_STRENGTH_TOOLTIP;Filter strength in stops.
-!TP_HLREC_BLEND;Blend
-!TP_HLREC_ENA_TOOLTIP;Could be activated by Auto Levels.
-!TP_HSVEQUALIZER_CHANNEL;Channel
-!TP_HSVEQUALIZER_HUE;H
-!TP_HSVEQUALIZER_LABEL;HSV Equalizer
-!TP_HSVEQUALIZER_SAT;S
-!TP_HSVEQUALIZER_VAL;V
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Baseline exposure
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET_TOOLTIP;Employ the embedded DCP baseline exposure offset. The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYHUESATMAP;Base table
-!TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYLOOKTABLE;Look table
-!TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-!TP_ICM_BLENDCMSMATRIX;Blend ICC highlights with matrix
-!TP_ICM_BLENDCMSMATRIX_TOOLTIP;Enable to recover clipped highlights when using LUT-based ICC profiles.
-!TP_ICM_BPC;Black Point Compensation
-!TP_ICM_DCPILLUMINANT;Illuminant
-!TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
-!TP_ICM_DCPILLUMINANT_TOOLTIP;Select which embedded DCP illuminant to employ. Default is "interpolated" which is a mix between the two based on white balance. The setting is only available if a dual-illuminant DCP with interpolation support is selected.
-!TP_ICM_INPUTCAMERAICC;Auto-matched camera profile
-!TP_ICM_INPUTCAMERAICC_TOOLTIP;Use RawTherapee's camera-specific DCP or ICC input color profiles. These profiles are more precise than simpler matrix ones. They are not available for all cameras. These profiles are stored in the /iccprofiles/input and /dcpprofiles folders and are automatically retrieved based on a file name matching to the exact model name of the camera.
-!TP_ICM_INPUTCAMERA_TOOLTIP;Use a simple color matrix from dcraw, an enhanced RawTherapee version (whichever is available based on camera model) or one embedded in the DNG.
-!TP_ICM_INPUTCUSTOM_TOOLTIP;Select your own DCP/ICC color profile file for the camera.
-!TP_ICM_INPUTEMBEDDED_TOOLTIP;Use color profile embedded in non-raw files.
-!TP_ICM_INPUTNONE;No profile
-!TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases.
-!TP_ICM_PROFILEINTENT;Rendering Intent
-!TP_ICM_SAVEREFERENCE;Save Reference Image
-!TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance
-!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles.
-!TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile.
-!TP_ICM_TONECURVE;Tone curve
-!TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only available if the selected DCP has a tone curve.
-!TP_ICM_WORKING_TRC;Tone response curve:
-!TP_ICM_WORKING_TRC_CUSTOM;Custom
-!TP_ICM_WORKING_TRC_GAMMA;Gamma
-!TP_ICM_WORKING_TRC_NONE;None
-!TP_ICM_WORKING_TRC_SLOPE;Slope
-!TP_ICM_WORKING_TRC_TOOLTIP;Only for built-in profiles.
-!TP_IMPULSEDENOISE_LABEL;Impulse Noise Reduction
-!TP_IMPULSEDENOISE_THRESH;Threshold
-!TP_LABCURVE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_LABCURVE_AVOIDCOLORSHIFT_TOOLTIP;Fit colors into gamut of the working color space and apply Munsell correction.
-!TP_LABCURVE_BRIGHTNESS;Lightness
-!TP_LABCURVE_CHROMATICITY;Chromaticity
-!TP_LABCURVE_CHROMA_TOOLTIP;To apply B&W toning, set Chromaticity to -100.
-!TP_LABCURVE_CONTRAST;Contrast
-!TP_LABCURVE_CURVEEDITOR;Luminance Curve
-!TP_LABCURVE_CURVEEDITOR_A_RANGE1;Green Saturated
-!TP_LABCURVE_CURVEEDITOR_A_RANGE2;Green Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE3;Red Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE4;Red Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE1;Blue Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE2;Blue Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE3;Yellow Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE4;Yellow Saturated
-!TP_LABCURVE_CURVEEDITOR_CC;CC
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE1;Neutral
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE2;Dull
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE3;Pastel
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE4;Saturated
-!TP_LABCURVE_CURVEEDITOR_CC_TOOLTIP;Chromaticity according to chromaticity C=f(C)
-!TP_LABCURVE_CURVEEDITOR_CH;CH
-!TP_LABCURVE_CURVEEDITOR_CH_TOOLTIP;Chromaticity according to hue C=f(H)
-!TP_LABCURVE_CURVEEDITOR_CL;CL
-!TP_LABCURVE_CURVEEDITOR_CL_TOOLTIP;Chromaticity according to luminance C=f(L)
-!TP_LABCURVE_CURVEEDITOR_HH;HH
-!TP_LABCURVE_CURVEEDITOR_HH_TOOLTIP;Hue according to hue H=f(H)
-!TP_LABCURVE_CURVEEDITOR_LC;LC
-!TP_LABCURVE_CURVEEDITOR_LC_TOOLTIP;Luminance according to chromaticity L=f(C)
-!TP_LABCURVE_CURVEEDITOR_LH;LH
-!TP_LABCURVE_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H)
-!TP_LABCURVE_CURVEEDITOR_LL_TOOLTIP;Luminance according to luminance L=f(L)
-!TP_LABCURVE_LABEL;L*a*b* Adjustments
-!TP_LABCURVE_LCREDSK;Restrict LC to red and skin-tones
-!TP_LABCURVE_LCREDSK_TIP;If enabled, the LC Curve affects only red and skin-tones.\nIf disabled, it applies to all tones.
-!TP_LABCURVE_RSTPROTECTION;Red and skin-tones protection
-!TP_LABCURVE_RSTPRO_TOOLTIP;Works on the Chromaticity slider and the CC curve.
-!TP_LENSGEOM_AUTOCROP;Auto-Crop
-!TP_LENSGEOM_FILL;Auto-fill
-!TP_LENSGEOM_LABEL;Lens / Geometry
-!TP_LENSPROFILE_CORRECTION_AUTOMATCH;Automatically selected
-!TP_LENSPROFILE_CORRECTION_LCPFILE;LCP file
-!TP_LENSPROFILE_CORRECTION_MANUAL;Manually selected
-!TP_LENSPROFILE_LABEL;Profiled Lens Correction
-!TP_LENSPROFILE_LENS_WARNING;Warning: the crop factor used for lens profiling is larger than the crop factor of the camera, the results might be wrong.
-!TP_LENSPROFILE_MODE_HEADER;Lens Profile
-!TP_LENSPROFILE_USE_CA;Chromatic aberration
-!TP_LENSPROFILE_USE_GEOMETRIC;Geometric distortion
-!TP_LENSPROFILE_USE_HEADER;Correct
-!TP_LENSPROFILE_USE_VIGNETTING;Vignetting
-!TP_LOCALCONTRAST_AMOUNT;Amount
-!TP_LOCALCONTRAST_DARKNESS;Darkness level
-!TP_LOCALCONTRAST_LABEL;Local Contrast
-!TP_LOCALCONTRAST_LIGHTNESS;Lightness level
-!TP_LOCALCONTRAST_RADIUS;Radius
-!TP_METADATA_EDIT;Apply modifications
-!TP_METADATA_MODE;Metadata copy mode
-!TP_METADATA_STRIP;Strip all metadata
-!TP_METADATA_TUNNEL;Copy unchanged
-!TP_NEUTRAL;Reset
-!TP_NEUTRAL_TIP;Resets exposure sliders to neutral values.\nApplies to the same controls that Auto Levels applies to, regardless of whether you used Auto Levels or not.
-!TP_PCVIGNETTE_FEATHER;Feather
-!TP_PCVIGNETTE_FEATHER_TOOLTIP;Feathering:\n0 = corners only,\n50 = halfway to center,\n100 = to center.
-!TP_PCVIGNETTE_LABEL;Vignette Filter
-!TP_PCVIGNETTE_ROUNDNESS;Roundness
-!TP_PCVIGNETTE_ROUNDNESS_TOOLTIP;Roundness:\n0 = rectangle,\n50 = fitted ellipse,\n100 = circle.
-!TP_PCVIGNETTE_STRENGTH;Strength
-!TP_PCVIGNETTE_STRENGTH_TOOLTIP;Filter strength in stops (reached in corners).
-!TP_PERSPECTIVE_HORIZONTAL;Horizontal
-!TP_PERSPECTIVE_LABEL;Perspective
-!TP_PERSPECTIVE_VERTICAL;Vertical
-!TP_PFCURVE_CURVEEDITOR_CH;Hue
-!TP_PFCURVE_CURVEEDITOR_CH_TOOLTIP;Controls defringe strength by color.\nHigher = more,\nLower = less.
-!TP_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!TP_PREPROCESS_DEADPIXFILT_TOOLTIP;Tries to suppress dead pixels.
-!TP_PREPROCESS_GREENEQUIL;Green equilibration
-!TP_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!TP_PREPROCESS_HOTPIXFILT_TOOLTIP;Tries to suppress hot pixels.
-!TP_PREPROCESS_LABEL;Preprocessing
-!TP_PREPROCESS_LINEDENOISE;Line noise filter
-!TP_PREPROCESS_LINEDENOISE_DIRECTION;Direction
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_BOTH;Both
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_HORIZONTAL;Horizontal
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_PDAF_LINES;Horizontal only on PDAF rows
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_VERTICAL;Vertical
-!TP_PREPROCESS_NO_FOUND;None found
-!TP_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!TP_PRSHARPENING_LABEL;Post-Resize Sharpening
-!TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions.
-!TP_RAWCACORR_AUTO;Auto-correction
-!TP_RAWCACORR_AUTOIT;Iterations
-!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
-!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CABLUE;Blue
-!TP_RAWCACORR_CARED;Red
-!TP_RAWCACORR_CASTR;Strength
-!TP_RAWEXPOS_BLACKS;Black Levels
-!TP_RAWEXPOS_BLACK_0;Green 1 (lead)
-!TP_RAWEXPOS_BLACK_1;Red
-!TP_RAWEXPOS_BLACK_2;Blue
-!TP_RAWEXPOS_BLACK_3;Green 2
-!TP_RAWEXPOS_BLACK_BLUE;Blue
-!TP_RAWEXPOS_BLACK_GREEN;Green
-!TP_RAWEXPOS_BLACK_RED;Red
-!TP_RAWEXPOS_LINEAR;White-point correction
-!TP_RAWEXPOS_RGB;Red, Green, Blue
-!TP_RAWEXPOS_TWOGREEN;Link greens
-!TP_RAW_1PASSMEDIUM;1-pass (Markesteijn)
-!TP_RAW_2PASS;1-pass+fast
-!TP_RAW_3PASSBEST;3-pass (Markesteijn)
-!TP_RAW_4PASS;3-pass+fast
-!TP_RAW_AHD;AHD
-!TP_RAW_AMAZE;AMaZE
-!TP_RAW_AMAZEVNG4;AMaZE+VNG4
-!TP_RAW_BORDER;Border
-!TP_RAW_DCB;DCB
-!TP_RAW_DCBENHANCE;DCB enhancement
-!TP_RAW_DCBITERATIONS;Number of DCB iterations
-!TP_RAW_DCBVNG4;DCB+VNG4
-!TP_RAW_DMETHOD;Method
-!TP_RAW_DMETHOD_PROGRESSBAR;%1 demosaicing...
-!TP_RAW_DMETHOD_PROGRESSBAR_REFINE;Demosaicing refinement...
-!TP_RAW_DMETHOD_TOOLTIP;Note: IGV and LMMSE are dedicated to high ISO images to aid in noise reduction without leading to maze patterns, posterization or a washed-out look.\nPixel Shift is for Pentax/Sony Pixel Shift files. It falls back to AMaZE for non-Pixel Shift files.
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST;Auto threshold
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST_TOOLTIP;If the checkbox is checked (recommended), RawTherapee calculates an optimum value based on flat regions in the image.\nIf there is no flat region in the image or the image is too noisy, the value will be set to 0.\nTo set the value manually, uncheck the checkbox first (reasonable values depend on the image).
-!TP_RAW_DUALDEMOSAICCONTRAST;Contrast threshold
-!TP_RAW_EAHD;EAHD
-!TP_RAW_FALSECOLOR;False color suppression steps
-!TP_RAW_FAST;Fast
-!TP_RAW_HD;Threshold
-!TP_RAW_HD_TOOLTIP;Lower values make hot/dead pixel detection more aggressive, but false positives may lead to artifacts. If you notice any artifacts appearing when enabling the Hot/Dead Pixel Filters, gradually increase the threshold value until they disappear.
-!TP_RAW_HPHD;HPHD
-!TP_RAW_IGV;IGV
-!TP_RAW_IMAGENUM;Sub-image
-!TP_RAW_IMAGENUM_SN;SN mode
-!TP_RAW_IMAGENUM_TOOLTIP;Some raw files consist of several sub-images (Pentax/Sony Pixel Shift, Pentax 3-in-1 HDR, Canon Dual Pixel, Fuji EXR).\n\nWhen using any demosaicing method other than Pixel Shift, this selects which sub-image is used.\n\nWhen using the Pixel Shift demosaicing method on a Pixel Shift raw, all sub-images are used, and this selects which sub-image should be used for moving parts.
-!TP_RAW_LABEL;Demosaicing
-!TP_RAW_LMMSE;LMMSE
-!TP_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!TP_RAW_LMMSE_TOOLTIP;Adds gamma (step 1), median (steps 2-4) and refinement (steps 5-6) to reduce artifacts and improve the signal-to-noise ratio.
-!TP_RAW_MONO;Mono
-!TP_RAW_NONE;None (Shows sensor pattern)
-!TP_RAW_PIXELSHIFT;Pixel Shift
-!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
-!TP_RAW_PIXELSHIFTDMETHOD;Demosaic method for motion
-!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
-!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
-!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
-!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
-!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
-!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
-!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
-!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
-!TP_RAW_PIXELSHIFTMM_OFF;Off
-!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
-!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
-!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
-!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
-!TP_RAW_PIXELSHIFTSIGMA;Blur radius
-!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
-!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
-!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
-!TP_RAW_RCD;RCD
-!TP_RAW_RCDVNG4;RCD+VNG4
-!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
-!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.\n+fast gives less artifacts in flat areas
-!TP_RAW_SENSOR_XTRANS_LABEL;Sensor with X-Trans Matrix
-!TP_RAW_VNG4;VNG4
-!TP_RAW_XTRANS;X-Trans
-!TP_RAW_XTRANSFAST;Fast X-Trans
-!TP_RESIZE_ALLOW_UPSCALING;Allow Upscaling
-!TP_RESIZE_APPLIESTO;Applies to:
-!TP_RESIZE_CROPPEDAREA;Cropped Area
-!TP_RESIZE_FITBOX;Bounding Box
-!TP_RESIZE_FULLIMAGE;Full Image
-!TP_RESIZE_LANCZOS;Lanczos
-!TP_RETINEX_CONTEDIT_HSL;HSL histogram
-!TP_RETINEX_CONTEDIT_LAB;L*a*b* histogram
-!TP_RETINEX_CONTEDIT_LH;Hue
-!TP_RETINEX_CONTEDIT_MAP;Equalizer
-!TP_RETINEX_CURVEEDITOR_CD;L=f(L)
-!TP_RETINEX_CURVEEDITOR_CD_TOOLTIP;Luminance according to luminance L=f(L)\nCorrect raw data to reduce halos and artifacts.
-!TP_RETINEX_CURVEEDITOR_LH;Strength=f(H)
-!TP_RETINEX_CURVEEDITOR_LH_TOOLTIP;Strength according to hue Strength=f(H)\nThis curve also acts on chroma when using the "Highlight" retinex method.
-!TP_RETINEX_CURVEEDITOR_MAP;L=f(L)
-!TP_RETINEX_CURVEEDITOR_MAP_TOOLTIP;This curve can be applied alone or with a Gaussian mask or wavelet mask.\nBeware of artifacts!
-!TP_RETINEX_EQUAL;Equalizer
-!TP_RETINEX_FREEGAMMA;Free gamma
-!TP_RETINEX_GAIN;Gain
-!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
-!TP_RETINEX_GAINTRANSMISSION;Gain transmission
-!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
-!TP_RETINEX_GAMMA;Gamma
-!TP_RETINEX_GAMMA_FREE;Free
-!TP_RETINEX_GAMMA_HIGH;High
-!TP_RETINEX_GAMMA_LOW;Low
-!TP_RETINEX_GAMMA_MID;Middle
-!TP_RETINEX_GAMMA_NONE;None
-!TP_RETINEX_GAMMA_TOOLTIP;Restore tones by applying gamma before and after Retinex. Different from Retinex curves or others curves (Lab, Exposure, etc.).
-!TP_RETINEX_GRAD;Transmission gradient
-!TP_RETINEX_GRADS;Strength gradient
-!TP_RETINEX_GRADS_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Strength is reduced when iterations increase, and conversely.
-!TP_RETINEX_GRAD_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Variance and Threshold are reduced when iterations increase, and conversely.
-!TP_RETINEX_HIGH;High
-!TP_RETINEX_HIGHLIG;Highlight
-!TP_RETINEX_HIGHLIGHT;Highlight threshold
-!TP_RETINEX_HIGHLIGHT_TOOLTIP;Increase action of High algorithm.\nMay require you to re-adjust "Neighboring pixels" and to increase the "White-point correction" in the Raw tab -> Raw White Points tool.
-!TP_RETINEX_HSLSPACE_LIN;HSL-Linear
-!TP_RETINEX_HSLSPACE_LOG;HSL-Logarithmic
-!TP_RETINEX_ITER;Iterations (Tone-mapping)
-!TP_RETINEX_ITERF;Tone mapping
-!TP_RETINEX_ITER_TOOLTIP;Simulate a tone-mapping operator.\nHigh values increase the processing time.
-!TP_RETINEX_LABEL;Retinex
-!TP_RETINEX_LABEL_MASK;Mask
-!TP_RETINEX_LABSPACE;L*a*b*
-!TP_RETINEX_LOW;Low
-!TP_RETINEX_MAP;Method
-!TP_RETINEX_MAP_GAUS;Gaussian mask
-!TP_RETINEX_MAP_MAPP;Sharp mask (wavelet partial)
-!TP_RETINEX_MAP_MAPT;Sharp mask (wavelet total)
-!TP_RETINEX_MAP_METHOD_TOOLTIP;Use the mask generated by the Gaussian function above (Radius, Method) to reduce halos and artifacts.\n\nCurve only: apply a diagonal contrast curve on the mask.\nBeware of artifacts!\n\nGaussian mask: generate and use a Gaussian blur of the original mask.\nQuick.\n\nSharp mask: generate and use a wavelet on the original mask.\nSlow.
-!TP_RETINEX_MAP_NONE;None
-!TP_RETINEX_MEDIAN;Transmission median filter
-!TP_RETINEX_METHOD;Method
-!TP_RETINEX_METHOD_TOOLTIP;Low = Reinforce low light.\nUniform = Equalize action.\nHigh = Reinforce high light.\nHighlights = Remove magenta in highlights.
-!TP_RETINEX_MLABEL;Restored haze-free Min=%1 Max=%2
-!TP_RETINEX_MLABEL_TOOLTIP;Should be near min=0 max=32768\nRestored image with no mixture.
-!TP_RETINEX_NEIGHBOR;Radius
-!TP_RETINEX_NEUTRAL;Reset
-!TP_RETINEX_NEUTRAL_TIP;Reset all sliders and curves to their default values.
-!TP_RETINEX_OFFSET;Offset (brightness)
-!TP_RETINEX_SCALES;Gaussian gradient
-!TP_RETINEX_SCALES_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Scale and radius are reduced when iterations increase, and conversely.
-!TP_RETINEX_SETTINGS;Settings
-!TP_RETINEX_SKAL;Scale
-!TP_RETINEX_SLOPE;Free gamma slope
-!TP_RETINEX_STRENGTH;Strength
-!TP_RETINEX_THRESHOLD;Threshold
-!TP_RETINEX_THRESHOLD_TOOLTIP;Limits in/out.\nIn = image source,\nOut = image gauss.
-!TP_RETINEX_TLABEL;TM Min=%1 Max=%2 Mean=%3 Sigma=%4
-!TP_RETINEX_TLABEL2;TM Tm=%1 TM=%2
-!TP_RETINEX_TLABEL_TOOLTIP;Transmission map result.\nMin and Max are used by Variance.\nMean and Sigma.\nTm=Min TM=Max of transmission map.
-!TP_RETINEX_TRANF;Transmission
-!TP_RETINEX_TRANSMISSION;Transmission map
-!TP_RETINEX_TRANSMISSION_TOOLTIP;Transmission according to transmission.\nAbscissa: transmission from negative values (min), mean, and positives values (max).\nOrdinate: amplification or reduction.
-!TP_RETINEX_UNIFORM;Uniform
-!TP_RETINEX_VARIANCE;Contrast
-!TP_RETINEX_VARIANCE_TOOLTIP;Low variance increase local contrast and saturation, but can lead to artifacts.
-!TP_RETINEX_VIEW;Process
-!TP_RETINEX_VIEW_MASK;Mask
-!TP_RETINEX_VIEW_METHOD_TOOLTIP;Standard - Normal display.\nMask - Displays the mask.\nUnsharp mask - Displays the image with a high radius unsharp mask.\nTransmission - Auto/Fixed - Displays the file transmission-map, before any action on contrast and brightness.\n\nAttention: the mask does not correspond to reality, but is amplified to make it more visible.
-!TP_RETINEX_VIEW_NONE;Standard
-!TP_RETINEX_VIEW_TRAN;Transmission - Auto
-!TP_RETINEX_VIEW_TRAN2;Transmission - Fixed
-!TP_RETINEX_VIEW_UNSHARP;Unsharp mask
-!TP_RGBCURVES_BLUE;B
-!TP_RGBCURVES_CHANNEL;Channel
-!TP_RGBCURVES_GREEN;G
-!TP_RGBCURVES_LABEL;RGB Curves
-!TP_RGBCURVES_LUMAMODE;Luminosity mode
-!TP_RGBCURVES_LUMAMODE_TOOLTIP;Luminosity mode allows to vary the contribution of R, G and B channels to the luminosity of the image, without altering image color.
-!TP_RGBCURVES_RED;R
-!TP_SAVEDIALOG_OK_TIP;Shortcut: Ctrl-Enter
-!TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
-!TP_SHARPENEDGE_AMOUNT;Quantity
-!TP_SHARPENEDGE_LABEL;Edges
-!TP_SHARPENEDGE_PASSES;Iterations
-!TP_SHARPENEDGE_THREE;Luminance only
-!TP_SHARPENING_BLUR;Blur radius
-!TP_SHARPENING_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_AMOUNT;Quantity
-!TP_SHARPENMICRO_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_LABEL;Microcontrast
-!TP_SHARPENMICRO_MATRIX;3×3 matrix instead of 5×5
-!TP_SHARPENMICRO_UNIFORMITY;Uniformity
-!TP_SOFTLIGHT_LABEL;Soft Light
-!TP_SOFTLIGHT_STRENGTH;Strength
-!TP_TM_FATTAL_AMOUNT;Amount
-!TP_TM_FATTAL_ANCHOR;Anchor
-!TP_TM_FATTAL_LABEL;Dynamic Range Compression
-!TP_TM_FATTAL_THRESHOLD;Detail
-!TP_VIBRANCE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES;HH
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_LABEL;Skin-tones
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE1;Red/Purple
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE2;Red
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE3;Red/Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE4;Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_TOOLTIP;Hue according to hue H=f(H)
-!TP_VIBRANCE_LABEL;Vibrance
-!TP_VIBRANCE_PASTELS;Pastel Tones
-!TP_VIBRANCE_PASTSATTOG;Link pastel and saturated tones
-!TP_VIBRANCE_PROTECTSKINS;Protect skin-tones
-!TP_VIBRANCE_PSTHRESHOLD;Pastel/saturated tones threshold
-!TP_VIBRANCE_PSTHRESHOLD_SATTHRESH;Saturation threshold
-!TP_VIBRANCE_PSTHRESHOLD_TOOLTIP;The vertical axis represents pastel tones at the bottom and saturated tones at the top.\nThe horizontal axis represents the saturation range.
-!TP_VIBRANCE_PSTHRESHOLD_WEIGTHING;Pastel/saturated transition's weighting
-!TP_VIBRANCE_SATURATED;Saturated Tones
-!TP_VIGNETTING_CENTER;Center
-!TP_VIGNETTING_CENTER_X;Center X
-!TP_VIGNETTING_CENTER_Y;Center Y
-!TP_VIGNETTING_STRENGTH;Strength
-!TP_WAVELET_1;Level 1
-!TP_WAVELET_2;Level 2
-!TP_WAVELET_3;Level 3
-!TP_WAVELET_4;Level 4
-!TP_WAVELET_5;Level 5
-!TP_WAVELET_6;Level 6
-!TP_WAVELET_7;Level 7
-!TP_WAVELET_8;Level 8
-!TP_WAVELET_9;Level 9
-!TP_WAVELET_APPLYTO;Apply To
-!TP_WAVELET_AVOID;Avoid color shift
-!TP_WAVELET_B0;Black
-!TP_WAVELET_B1;Grey
-!TP_WAVELET_B2;Residual
-!TP_WAVELET_BACKGROUND;Background
-!TP_WAVELET_BACUR;Curve
-!TP_WAVELET_BALANCE;Contrast balance d/v-h
-!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified.
-!TP_WAVELET_BALCHRO;Chroma balance
-!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance.
-!TP_WAVELET_BANONE;None
-!TP_WAVELET_BASLI;Slider
-!TP_WAVELET_BATYPE;Contrast balance method
-!TP_WAVELET_CBENAB;Toning and Color Balance
-!TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted
-!TP_WAVELET_CCURVE;Local contrast
-!TP_WAVELET_CH1;Whole chroma range
-!TP_WAVELET_CH2;Saturated/pastel
-!TP_WAVELET_CH3;Link contrast levels
-!TP_WAVELET_CHCU;Curve
-!TP_WAVELET_CHR;Chroma-contrast link strength
-!TP_WAVELET_CHRO;Saturated/pastel threshold
-!TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored.
-!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength"
-!TP_WAVELET_CHSL;Sliders
-!TP_WAVELET_CHTYPE;Chrominance method
-!TP_WAVELET_COLORT;Opacity Red-Green
-!TP_WAVELET_COMPCONT;Contrast
-!TP_WAVELET_COMPGAMMA;Compression gamma
-!TP_WAVELET_COMPGAMMA_TOOLTIP;Adjusting the gamma of the residual image allows you to equilibrate the data and histogram.
-!TP_WAVELET_COMPTM;Tone mapping
-!TP_WAVELET_CONTEDIT;'After' contrast curve
-!TP_WAVELET_CONTR;Gamut
-!TP_WAVELET_CONTRA;Contrast
-!TP_WAVELET_CONTRAST_MINUS;Contrast -
-!TP_WAVELET_CONTRAST_PLUS;Contrast +
-!TP_WAVELET_CONTRA_TOOLTIP;Changes contrast of the residual image.
-!TP_WAVELET_CTYPE;Chrominance control
-!TP_WAVELET_CURVEEDITOR_CC_TOOLTIP;Modifies local contrast as a function of the original local contrast (abscissa).\nLow abscissa values represent small local contrast (real values about 10..20).\n50% abscissa represents average local contrast (real value about 100..300).\n66% abscissa represents standard deviation of local contrast (real value about 300..800).\n100% abscissa represents maximum local contrast (real value about 3000..8000).
-!TP_WAVELET_CURVEEDITOR_CH;Contrast levels=f(Hue)
-!TP_WAVELET_CURVEEDITOR_CH_TOOLTIP;Modifies each level's contrast as a function of hue.\nTake care not to overwrite changes made with the Gamut sub-tool's hue controls.\nThe curve will only have an effect when wavelet contrast level sliders are non-zero.
-!TP_WAVELET_CURVEEDITOR_CL;L
-!TP_WAVELET_CURVEEDITOR_CL_TOOLTIP;Applies a final contrast luminance curve at the end of the wavelet treatment.
-!TP_WAVELET_CURVEEDITOR_HH;HH
-!TP_WAVELET_CURVEEDITOR_HH_TOOLTIP;Modifies the residual image's hue as a function of hue.
-!TP_WAVELET_DALL;All directions
-!TP_WAVELET_DAUB;Edge performance
-!TP_WAVELET_DAUB2;D2 - low
-!TP_WAVELET_DAUB4;D4 - standard
-!TP_WAVELET_DAUB6;D6 - standard plus
-!TP_WAVELET_DAUB10;D10 - medium
-!TP_WAVELET_DAUB14;D14 - high
-!TP_WAVELET_DAUB_TOOLTIP;Changes Daubechies coefficients:\nD4 = Standard,\nD14 = Often best performance, 10% more time-intensive.\n\nAffects edge detection as well as the general quality of the firsts levels. However the quality is not strictly related to this coefficient and can vary with images and uses.
-!TP_WAVELET_DONE;Vertical
-!TP_WAVELET_DTHR;Diagonal
-!TP_WAVELET_DTWO;Horizontal
-!TP_WAVELET_EDCU;Curve
-!TP_WAVELET_EDGCONT;Local contrast
-!TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, top-left, top-right and bottom-right represent respectively local contrast for low values, mean, mean+stdev and maxima.
-!TP_WAVELET_EDGE;Edge Sharpness
-!TP_WAVELET_EDGEAMPLI;Base amplification
-!TP_WAVELET_EDGEDETECT;Gradient sensitivity
-!TP_WAVELET_EDGEDETECTTHR;Threshold low (noise)
-!TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection)
-!TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky.
-!TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise.
-!TP_WAVELET_EDGESENSI;Edge sensitivity
-!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
-!TP_WAVELET_EDGTHRESH;Detail
-!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
-!TP_WAVELET_EDRAD;Radius
-!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
-!TP_WAVELET_EDSL;Threshold Sliders
-!TP_WAVELET_EDTYPE;Local contrast method
-!TP_WAVELET_EDVAL;Strength
-!TP_WAVELET_FINAL;Final Touchup
-!TP_WAVELET_FINEST;Finest
-!TP_WAVELET_HIGHLIGHT;Highlight luminance range
-!TP_WAVELET_HS1;Whole luminance range
-!TP_WAVELET_HS2;Shadows/Highlights
-!TP_WAVELET_HUESKIN;Skin hue
-!TP_WAVELET_HUESKIN_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_HUESKY;Sky hue
-!TP_WAVELET_HUESKY_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_ITER;Delta balance levels
-!TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels.
-!TP_WAVELET_LABEL;Wavelet Levels
-!TP_WAVELET_LARGEST;Coarsest
-!TP_WAVELET_LEVCH;Chroma
-!TP_WAVELET_LEVDIR_ALL;All levels in all directions
-!TP_WAVELET_LEVDIR_INF;Below or equal the level
-!TP_WAVELET_LEVDIR_ONE;One level
-!TP_WAVELET_LEVDIR_SUP;Above the level
-!TP_WAVELET_LEVELS;Wavelet levels
-!TP_WAVELET_LEVELS_TOOLTIP;Choose the number of detail levels the image is to be decomposed into. More levels require more RAM and require a longer processing time.
-!TP_WAVELET_LEVF;Contrast
-!TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1
-!TP_WAVELET_LEVONE;Level 2
-!TP_WAVELET_LEVTHRE;Level 4
-!TP_WAVELET_LEVTWO;Level 3
-!TP_WAVELET_LEVZERO;Level 1
-!TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength
-!TP_WAVELET_LIPST;Enhanced algoritm
-!TP_WAVELET_LOWLIGHT;Shadow luminance range
-!TP_WAVELET_MEDGREINF;First level
-!TP_WAVELET_MEDI;Reduce artifacts in blue sky
-!TP_WAVELET_MEDILEV;Edge detection
-!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine.
-!TP_WAVELET_NEUTRAL;Neutral
-!TP_WAVELET_NOIS;Denoise
-!TP_WAVELET_NOISE;Denoise and Refine
-!TP_WAVELET_NPHIGH;High
-!TP_WAVELET_NPLOW;Low
-!TP_WAVELET_NPNONE;None
-!TP_WAVELET_NPTYPE;Neighboring pixels
-!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced.
-!TP_WAVELET_OPACITY;Opacity Blue-Yellow
-!TP_WAVELET_OPACITYW;Contrast balance d/v-h curve
-!TP_WAVELET_OPACITYWL;Final local contrast
-!TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right.
-!TP_WAVELET_PASTEL;Pastel chroma
-!TP_WAVELET_PROC;Process
-!TP_WAVELET_RE1;Reinforced
-!TP_WAVELET_RE2;Unchanged
-!TP_WAVELET_RE3;Reduced
-!TP_WAVELET_RESCHRO;Chroma
-!TP_WAVELET_RESCON;Shadows
-!TP_WAVELET_RESCONH;Highlights
-!TP_WAVELET_RESID;Residual Image
-!TP_WAVELET_SAT;Saturated chroma
-!TP_WAVELET_SETTINGS;Wavelet Settings
-!TP_WAVELET_SKIN;Skin targetting/protection
-!TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_WAVELET_SKY;Sky targetting/protection
-!TP_WAVELET_SKY_TOOLTIP;At -100 sky-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 sky-tones are protected while all other tones are affected.
-!TP_WAVELET_STREN;Strength
-!TP_WAVELET_STRENGTH;Strength
-!TP_WAVELET_SUPE;Extra
-!TP_WAVELET_THR;Shadows threshold
-!TP_WAVELET_THRESHOLD;Highlight levels
-!TP_WAVELET_THRESHOLD2;Shadow levels
-!TP_WAVELET_THRESHOLD2_TOOLTIP;Only levels between 9 and 9 minus the value will be affected by the shadow luminance range. Other levels will be fully treated. The highest level possible is limited by the highlight level value (9 minus highlight level value).
-!TP_WAVELET_THRESHOLD_TOOLTIP;Only levels beyond the chosen value will be affected by the highlight luminance range. Other levels will be fully treated. The chosen value here limits the highest possible value of the shadow levels.
-!TP_WAVELET_THRH;Highlights threshold
-!TP_WAVELET_TILESBIG;Big tiles
-!TP_WAVELET_TILESFULL;Full image
-!TP_WAVELET_TILESIZE;Tiling method
-!TP_WAVELET_TILESLIT;Little tiles
-!TP_WAVELET_TILES_TOOLTIP;Processing the full image leads to better quality and is the recommended option, while using tiles is a fall-back solution for users with little RAM. Refer to RawPedia for memory requirements.
-!TP_WAVELET_TMSTRENGTH;Compression strength
-!TP_WAVELET_TMSTRENGTH_TOOLTIP;Control the strength of tone mapping or contrast compression of the residual image. When the value is different from 0, the Strength and Gamma sliders of the Tone Mapping tool in the Exposure tab will become grayed out.
-!TP_WAVELET_TMTYPE;Compression method
-!TP_WAVELET_TON;Toning
-!TP_WBALANCE_CLOUDY;Cloudy
-!TP_WBALANCE_DAYLIGHT;Daylight (sunny)
-!TP_WBALANCE_EQBLUERED;Blue/Red equalizer
-!TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behavior of "white balance" by modulating the blue/red balance.\nThis can be useful when shooting conditions:\na) are far from the standard illuminant (e.g. underwater),\nb) are far from conditions where calibrations were performed,\nc) where the matrices or ICC profiles are unsuitable.
-!TP_WBALANCE_FLASH55;Leica
-!TP_WBALANCE_FLASH60;Standard, Canon, Pentax, Olympus
-!TP_WBALANCE_FLASH65;Nikon, Panasonic, Sony, Minolta
-!TP_WBALANCE_FLASH_HEADER;Flash
-!TP_WBALANCE_FLUO1;F1 - Daylight
-!TP_WBALANCE_FLUO2;F2 - Cool White
-!TP_WBALANCE_FLUO3;F3 - White
-!TP_WBALANCE_FLUO4;F4 - Warm White
-!TP_WBALANCE_FLUO5;F5 - Daylight
-!TP_WBALANCE_FLUO6;F6 - Lite White
-!TP_WBALANCE_FLUO7;F7 - D65 Daylight Simulator
-!TP_WBALANCE_FLUO8;F8 - D50 / Sylvania F40 Design
-!TP_WBALANCE_FLUO9;F9 - Cool White Deluxe
-!TP_WBALANCE_FLUO10;F10 - Philips TL85
-!TP_WBALANCE_FLUO11;F11 - Philips TL84
-!TP_WBALANCE_FLUO12;F12 - Philips TL83
-!TP_WBALANCE_FLUO_HEADER;Fluorescent
-!TP_WBALANCE_GTI;GTI
-!TP_WBALANCE_HMI;HMI
-!TP_WBALANCE_JUDGEIII;JudgeIII
-!TP_WBALANCE_LAMP_HEADER;Lamp
-!TP_WBALANCE_LED_CRS;CRS SP12 WWMR16
-!TP_WBALANCE_LED_HEADER;LED
-!TP_WBALANCE_LED_LSI;LSI Lumelex 2040
-!TP_WBALANCE_PICKER;Pick
-!TP_WBALANCE_SHADE;Shade
-!TP_WBALANCE_SOLUX35;Solux 3500K
-!TP_WBALANCE_SOLUX41;Solux 4100K
-!TP_WBALANCE_SOLUX47;Solux 4700K (vendor)
-!TP_WBALANCE_SOLUX47_NG;Solux 4700K (Nat. Gallery)
-!TP_WBALANCE_TEMPBIAS;AWB temperature bias
-!TP_WBALANCE_TEMPBIAS_TOOLTIP;Allows to alter the computation of the "auto white balance"\nby biasing it towards warmer or cooler temperatures. The bias\nis expressed as a percentage of the computed temperature,\nso that the result is given by "computedTemp + computedTemp * bias".
-!TP_WBALANCE_TUNGSTEN;Tungsten
-!TP_WBALANCE_WATER1;UnderWater 1
-!TP_WBALANCE_WATER2;UnderWater 2
-!TP_WBALANCE_WATER_HEADER;UnderWater
-!ZOOMPANEL_100;(100%)
-!ZOOMPANEL_NEWCROPWINDOW;Open (new) detail window
-!ZOOMPANEL_ZOOM100;Zoom to 100%\nShortcut: z
-!ZOOMPANEL_ZOOMFITCROPSCREEN;Fit crop to screen\nShortcut: f
-!ZOOMPANEL_ZOOMFITSCREEN;Fit whole image to screen\nShortcut: Alt-f
-!ZOOMPANEL_ZOOMIN;Zoom In\nShortcut: +
-!ZOOMPANEL_ZOOMOUT;Zoom Out\nShortcut: -
diff --git a/rtdata/languages/Czech b/rtdata/languages/Czech
index 733aa2015..be3a8993e 100644
--- a/rtdata/languages/Czech
+++ b/rtdata/languages/Czech
@@ -140,7 +140,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Vynechat [raw] kroky vylepšení LMMSE
EXPORT_BYPASS_SHARPENEDGE;Vynechat doostření hran
EXPORT_BYPASS_SHARPENING;Vynechat doostření
EXPORT_BYPASS_SHARPENMICRO;Vynechat mikrokontrast
-EXPORT_BYPASS_SH_HQ;Vynechat masku ostrosti stínů a světel
EXPORT_FASTEXPORTOPTIONS;Volby rychlého exportu
EXPORT_INSTRUCTIONS;Volba rychlého exportu umožňuje potlačit vybrané nastavení procesu vyvolání a zkrátit tak čas a zdroje potřebné pro zpracování fronty tím, že se pro vyvolání použije nastavení rychlého exportu. Tato metoda je doporučována pro rychlejší vyvolání obrázků v nižším rozlišení v případě, že je důležitá rychlost, nebo pokud je požadováno vyvolání jednoho nebo více obrázků v nižším rozlišení bez změny uložených parametrů vyvolání.
EXPORT_MAXHEIGHT;Maximální výška:
@@ -153,7 +152,6 @@ EXPORT_USE_FAST_PIPELINE_TIP;Použije vyhrazenou frontu zpracování v režimu r
EXPORT_USE_NORMAL_PIPELINE;Standardní (přeskočí některé kroky, zmenší až na konci)
EXTPROGTARGET_1;raw
EXTPROGTARGET_2;Zpracování fronty
-FILEBROWSER_ADDDELTEMPLATE;Přidat/Smazat šablony...
FILEBROWSER_APPLYPROFILE;Použít
FILEBROWSER_APPLYPROFILE_PARTIAL;Aplikovat - částečně
FILEBROWSER_AUTODARKFRAME;Automatický tmavý snímek
@@ -1091,7 +1089,6 @@ PREFERENCES_BEHADDALLHINT;Nastaví všechny parametry do módu Přidat.\n
PREFERENCES_BEHAVIOR;Režim
PREFERENCES_BEHSETALL;Vše do 'Nastavit'
PREFERENCES_BEHSETALLHINT;Nastaví všechny parametry do módu Nastavit.\nZměna parametrů v panelu dávkového zpracování se aplikuje jako absolutní, budou zobrazeny aktuální hodnoty.
-PREFERENCES_BLACKBODY;Wolfram
PREFERENCES_CACHECLEAR;Smazat
PREFERENCES_CACHECLEAR_ALL;Smazat z mezipaměti všechny soubory :
PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Smazat z mezipaměti všechny soubory mimo profilů zpracování:
@@ -1122,11 +1119,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Formát klíče
PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Jméno
PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
PREFERENCES_CUSTPROFBUILDPATH;Cesta k programu
-PREFERENCES_D50;Nastavení v hlavní nabídce
-PREFERENCES_D50_OLD;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
PREFERENCES_DARKFRAMEFOUND;Nalezeno
PREFERENCES_DARKFRAMESHOTS;snímků
PREFERENCES_DARKFRAMETEMPLATES;šablony
@@ -1149,32 +1141,15 @@ PREFERENCES_FLATFIELDFOUND;Nalezeno
PREFERENCES_FLATFIELDSDIR;Složka Flat Field souborů
PREFERENCES_FLATFIELDSHOTS;snímků
PREFERENCES_FLATFIELDTEMPLATES;šablony
-PREFERENCES_FLUOF2;Fluorescenční F2
-PREFERENCES_FLUOF7;Fluorescenční F7
-PREFERENCES_FLUOF11;Fluorescenční F11
PREFERENCES_FORIMAGE;Pro ostatní fotografie
PREFERENCES_FORRAW;Pro raw fotografie
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Stejná velikost náhledu ve filmovém pásu a v Prohlížeči souborů
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Rozdílné velikosti náhledů znamenají delší dobu zpracování při přepínání mezi obrázkem v záložce Editoru a Prohlížečem souborů.
PREFERENCES_GIMPPATH;GIMP instalační složka
-PREFERENCES_GREY;Yb svítivost výstupního zařízení (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Nastavení v hlavní nabídce
-PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;Yb svítivost scény (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;Automaticky
PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram v levém panelu
-PREFERENCES_HISTOGRAMWORKING;Navigátor a hlavní histogram používají pracovní profil
PREFERENCES_HISTOGRAM_TOOLTIP;Pokud je povoleno, používá se pracovní profil pro vykreslení hlavního histogramu a v navigačním panelu. V opačném případě je použit výstupní profil s aplikovanou gama korekcí.
PREFERENCES_HLTHRESHOLD;Práh oříznutých světel
PREFERENCES_ICCDIR;Složka obsahující barevné profily
-PREFERENCES_IMG_RELOAD_NEEDED;Tyto změny se projeví až po novém načtení již otevřeného obrázku (nebo po otevření nového obrázku)
PREFERENCES_IMPROCPARAMS;Výchozí profil zpracování
PREFERENCES_INSPECT_LABEL;Prohlížení
PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximální počet obrázků v mezipaměti
@@ -1193,7 +1168,6 @@ PREFERENCES_MENUGROUPLABEL;Skupina "Barevné štítky"
PREFERENCES_MENUGROUPPROFILEOPERATIONS;Skupina "Operace s profily zpracování"
PREFERENCES_MENUGROUPRANK;Skupina "Hodnocení"
PREFERENCES_MENUOPTIONS;Volby místní nabídky
-PREFERENCES_METADATA;Metadata
PREFERENCES_MONINTENT;Výchozí reprodukční záměr
PREFERENCES_MONITOR;Monitor
PREFERENCES_MONPROFILE;Výchozí barevný profil
@@ -1269,9 +1243,7 @@ PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutrální vykreslení RAW
PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Vložený JPEG náhled pokud je v plné velikosti, jinak neutrální raw
PREFERENCES_TP_LABEL;Panel nástrojů:
PREFERENCES_TP_VSCROLLBAR;Skrýt svislou posuvnou lištu
-PREFERENCES_TUNNELMETADATA;Zkopírovat nezměněná Exif/IPTC/XMP metadata do výstupního souboru
PREFERENCES_USEBUNDLEDPROFILES;Použít přiložené profily
-PREFERENCES_VIEW;Nastavení vyvážení bílé výstupních zařízení (monitor, TV, projektor, rámeček a jiné)
PREFERENCES_WORKFLOW;Rozvržení
PROFILEPANEL_COPYPPASTE;Parametry pro kopírování
PROFILEPANEL_GLOBALPROFILES;Přiložené profily
@@ -1480,8 +1452,6 @@ TP_COLORAPP_SURROUND_DARK;Tmavé
TP_COLORAPP_SURROUND_DIM;Tlumené
TP_COLORAPP_SURROUND_EXDARK;Velmi tmavé
TP_COLORAPP_SURROUND_TOOLTIP;Změní tóny a barvy dle podmínek prohlížení na výstupním zařízení\n\nPrůměrné: Průměrné osvětlení prostředí (standardní). Obrázek nebude změněn.\n\nTlumené: Tlumené prostředí (TV). Obrázek bude mírně ztmaven.\n\nTmavé: Tmavé prostředí (projektor). Obrázek bude více tmavý.\n\nVelmi tmavé: Velmi tmavé prostředí (cutsheet). Obrázek bude velmi tmavý.
-TP_COLORAPP_SURSOURCE;Tmavé okolí
-TP_COLORAPP_SURSOURCE_TOOLTIP;Může být použito, pokud má vstupní obrázek tmavý okraj.
TP_COLORAPP_TCMODE_BRIGHTNESS;Jas
TP_COLORAPP_TCMODE_CHROMA;Barevnost
TP_COLORAPP_TCMODE_COLORF;Pestrobarevnost
@@ -1582,7 +1552,6 @@ TP_DEHAZE_SHOW_DEPTH_MAP;Ukázat hloubkovou mapu
TP_DEHAZE_STRENGTH;Síla
TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Více zónová automatika
TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatická celková
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Zkusí odhadnout barevný šum\nPozor, tento výpočet je zprůměrován a zcela subjektivní!
TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Barevnost - Modrá a žlutá
TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Křivka barevnosti
TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Zvýší (násobí) hodnoty všech barevných posuvníků.\nKřivka vám umožní nastavit sílu redukce barevného šumu jako funkci barvy. Například pro zvýšení účinku v oblastech s nízkým nasycení a snížení v oblastech s vysokým nasycením.
@@ -1600,8 +1569,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Náhled šumu: Průměr=%1 Výš
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Náhled šumu: Průměr= - Výšky= -
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Velikost dlaždice=%1, Střed: Tx=%2 Ty=%3
TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Barevnost - Červená a zelená
-TP_DIRPYRDENOISE_ENH;Vylepšený režim
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Zvýší kvalitu odstranění šumu, ale zároveň prodlouží dobu zpracování o 20%.
TP_DIRPYRDENOISE_LABEL;Redukce šumu
TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Ovládání jasu
TP_DIRPYRDENOISE_LUMINANCE_CURVE;Křivka jasů
@@ -1630,7 +1597,6 @@ TP_DIRPYRDENOISE_MEDIAN_PASSES;Počet průchodů mediánu
TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Aplikování tří průchodů filtru medián s oknem 3×3 často vede k lepšímu výsledku než jednou aplikovaný filtr medián s oknem 7×7.
TP_DIRPYRDENOISE_MEDIAN_TYPE;Typ mediánu
TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Aplikuje filtr medián požadované velikosti okna. Čím větší velikost okna, tím déle bude zpracování trvat.\n\n3×3 jemný: upraví 5 pixelů v okně 3x3 pixely.\n3×3: upraví 9 pixelů v okně 3x3 pixely.\n5×5 jemný; upraví 13 pixelů v okně 5x5 pixelů.\n5×5: upraví 25 pixelů v okně 5x5 pixelů.\n7×7: upraví 49 pixelů v okně 7x7 pixelů.\n9×9: upraví 81 pixelů v okně 9x9 pixelů.\n\nV některých případech může být větší kvality dosaženo pomocí několika průběhů s menšími okny než jedním průběhem s velkým oknem.
-TP_DIRPYRDENOISE_SLI;Posuvník
TP_DIRPYRDENOISE_TYPE_3X3;3×3
TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 jemný
TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1735,8 +1701,6 @@ TP_ICM_APPLYHUESATMAP;Základní tabulka
TP_ICM_APPLYHUESATMAP_TOOLTIP;Použije vloženou DCP základní tabulku (HueSatMap). Toto nastavení je dostupné pouze pokud ji vybrané DCP obsahuje.
TP_ICM_APPLYLOOKTABLE;Tabulka vzhledu
TP_ICM_APPLYLOOKTABLE_TOOLTIP;Použije vloženou DCP tabulku vzhledu. Nastavení je dostupné pouze pokud ji vybrané DCP obsahuje.
-TP_ICM_BLENDCMSMATRIX;Smísení ICC světel s matici
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Povolit obnovení vypálených jasů při použití ICC profilů založených na LUT.
TP_ICM_BPC;Kompenzace černého bodu
TP_ICM_DCPILLUMINANT;Osvětlení
TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolované
@@ -1862,7 +1826,6 @@ TP_RAWCACORR_AUTOIT_TOOLTIP;Toto nastavení je dostupné po zatržení volby "Au
TP_RAWCACORR_AVOIDCOLORSHIFT;Zabránit posunu barev
TP_RAWCACORR_CABLUE;Modrá
TP_RAWCACORR_CARED;Červená
-TP_RAWCACORR_CASTR;Síla
TP_RAWEXPOS_BLACKS;Úrovně černé
TP_RAWEXPOS_BLACK_0;Zelená 1 (řídící)
TP_RAWEXPOS_BLACK_1;Červená
@@ -1920,15 +1883,12 @@ TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Vyrovná jas ostatních snímků podle jasu
TP_RAW_PIXELSHIFTGREEN;Kontrolovat zelený kanál na pohyb
TP_RAW_PIXELSHIFTHOLEFILL;Vyplnit díry v masce pohybu
TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Vyplnit díry v masce pohybu
-TP_RAW_PIXELSHIFTLMMSE;Použít LMMSE pro části s pohybem
-TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Pro oblasti s pohybem použít LMMSE namísto AMaZE.\nUžitečné pro fotografie s vysokým ISO.
TP_RAW_PIXELSHIFTMEDIAN;Použít medián pro části s pohybem
TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Pro oblasti s pohybem použijte medián všech snímků namísto vybraného.\nOdstraní objekty, které jsou na všech snímcích na různých místech.\nVytvoří efekt pohybu pro pomalu se pohybující (překrývající se) objekty.
TP_RAW_PIXELSHIFTMM_AUTO;Automatická
TP_RAW_PIXELSHIFTMM_CUSTOM;Vlastní
TP_RAW_PIXELSHIFTMM_OFF;Vypnuto
TP_RAW_PIXELSHIFTMOTIONMETHOD;Korekce pohybu
-TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 znamená bez detekce pohybu.\n1 - 99 znamená, že pohybu bude detekován dle této hodnoty. Pro zvýšení míry detekce použijte vyšší hodnotu.\n100 znamená, že bude použito AMaZE demozajkování snímku.
TP_RAW_PIXELSHIFTNONGREENCROSS;Kontrolovat pohyb v červeném a modrém kanálu
TP_RAW_PIXELSHIFTSHOWMOTION;Ukázat masku pohybu
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Ukázat pouze masku pohybu
@@ -1975,7 +1935,6 @@ TP_RETINEX_GAIN;Zisk
TP_RETINEX_GAINOFFS;Zisk a posun (jasu)
TP_RETINEX_GAINTRANSMISSION;Přenos zisku
TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Zesílí nebo zeslabí mapu přenosu pro dosažení požadovaného jasu.\nOsa X je přenos.\nOsa Y je zisk.
-TP_RETINEX_GAIN_TOOLTIP;Působí na obnovený obrázek.\n\nToto je velmi odlišné od ostatních nastavení. Použito pro černé nebo bílé pixely a pro vyvážení histogramu.
TP_RETINEX_GAMMA;Gama
TP_RETINEX_GAMMA_FREE;Volná
TP_RETINEX_GAMMA_HIGH;Vysoká
@@ -2053,10 +2012,8 @@ TP_SAVEDIALOG_OK_TIP;Zkratka: Ctrl-Enter
TP_SHADOWSHLIGHTS_HIGHLIGHTS;Světla
TP_SHADOWSHLIGHTS_HLTONALW;Tónový rozsah světel
TP_SHADOWSHLIGHTS_LABEL;Stíny/Světla
-TP_SHADOWSHLIGHTS_LOCALCONTR;Místní kontrast
TP_SHADOWSHLIGHTS_RADIUS;Poloměr
TP_SHADOWSHLIGHTS_SHADOWS;Stíny
-TP_SHADOWSHLIGHTS_SHARPMASK;Maska ostrosti
TP_SHADOWSHLIGHTS_SHTONALW;Tónový rozsah stínů
TP_SHARPENEDGE_AMOUNT;Kvantita
TP_SHARPENEDGE_LABEL;Hrany
diff --git a/rtdata/languages/Dansk b/rtdata/languages/Dansk
deleted file mode 100644
index 44d6ad5f8..000000000
--- a/rtdata/languages/Dansk
+++ /dev/null
@@ -1,2328 +0,0 @@
-#01 2009-06-27 krengbo
-
-CURVEEDITOR_LINEAR;Lineær
-CURVEEDITOR_LOADDLGLABEL;Indlæs kurve...
-CURVEEDITOR_SAVEDLGLABEL;Gem kurve...
-CURVEEDITOR_TOOLTIPLINEAR;Nulstil kurve til lineær
-CURVEEDITOR_TOOLTIPLOAD;Indlæs kurve fra fil
-CURVEEDITOR_TOOLTIPSAVE;Gem nuværende kurve
-DIRBROWSER_FOLDERS;Mapper
-EXIFFILTER_APERTURE;Blænde
-EXIFFILTER_CAMERA;Kamera
-EXIFFILTER_FOCALLEN;Brændvidde
-EXIFFILTER_ISO;ISO
-EXIFFILTER_LENS;Objektiv
-EXIFFILTER_SHUTTER;Lukkertid
-EXIFPANEL_ADDEDIT;Tilføj/Rediger
-EXIFPANEL_ADDEDITHINT;Tilføj nyt tags eller rediger tags
-EXIFPANEL_ADDTAGDLG_ENTERVALUE;Indtast værdi
-EXIFPANEL_ADDTAGDLG_SELECTTAG;Vælg tags
-EXIFPANEL_ADDTAGDLG_TITLE;Tilføj/Rediger tags
-EXIFPANEL_KEEP;Bevar
-EXIFPANEL_KEEPHINT;Bevar de valgte tags under skrivning af fil
-EXIFPANEL_REMOVE;Fjern
-EXIFPANEL_REMOVEHINT;Fjern de valgte tags under skrivning af fil
-EXIFPANEL_RESET;Gendan
-EXIFPANEL_RESETALL;Gendan alt
-EXIFPANEL_RESETALLHINT;Gendan alle tags til de oprindelige værdier
-EXIFPANEL_RESETHINT;Gendan valgte tags til de oprindelige værdier
-EXIFPANEL_SUBDIRECTORY;Undermappe
-FILEBROWSER_APPLYPROFILE;Anvend profil
-FILEBROWSER_CLEARPROFILE;Ryd profil
-FILEBROWSER_COPYPROFILE;Kopier profil
-FILEBROWSER_DELETEDLGLABEL;Bekræft sletning af fil
-FILEBROWSER_DELETEDLGMSG;Er du sikker på, at du vil slette de %1 valgte filer?
-FILEBROWSER_EMPTYTRASH;Tøm papirkurv
-FILEBROWSER_EMPTYTRASHHINT;Slet filerne i papirkurv permanent
-FILEBROWSER_PARTIALPASTEPROFILE;Indsæt delvist
-FILEBROWSER_PASTEPROFILE;Indsæt profil
-FILEBROWSER_POPUPCANCELJOB;Annuler opgave
-FILEBROWSER_POPUPMOVEEND;Flyt til slutning af køen
-FILEBROWSER_POPUPMOVEHEAD;Flyt til starten af køen
-FILEBROWSER_POPUPOPEN;Åbn
-FILEBROWSER_POPUPOPENINEDITOR;Åbn i Editor
-FILEBROWSER_POPUPPROCESS;Sæt i opgavekø
-FILEBROWSER_POPUPREMOVE;fjern fra filsystem
-FILEBROWSER_POPUPRENAME;Omdøb
-FILEBROWSER_POPUPSELECTALL;Vælg alt
-FILEBROWSER_POPUPTRASH;Flyt til papirkurv
-FILEBROWSER_POPUPUNRANK;Fjern vurdering
-FILEBROWSER_POPUPUNTRASH;Fjern fra papirkurv
-FILEBROWSER_RENAMEDLGLABEL;Omdøb fil
-FILEBROWSER_SHOWDIRHINT;Vis alle billeder i mappen
-FILEBROWSER_SHOWRANK1HINT;Vis billeder vurderet med 1 stjerne
-FILEBROWSER_SHOWRANK2HINT;Vis billeder vurderet med 2 stjerner
-FILEBROWSER_SHOWRANK3HINT;Vis billeder vurderet med 3 stjerner
-FILEBROWSER_SHOWRANK4HINT;Vis billeder vurderet med 4 stjerner
-FILEBROWSER_SHOWRANK5HINT;Vis billeder vurderet med 5 stjerner
-FILEBROWSER_SHOWTRASHHINT;Vis indhold i papirkurven
-FILEBROWSER_SHOWUNRANKHINT;Vis billeder uden vurdering
-FILEBROWSER_THUMBSIZE;Miniaturestr.
-FILEBROWSER_ZOOMINHINT;Gør miniaturer større
-FILEBROWSER_ZOOMOUTHINT;Gør miniaturer mindre
-GENERAL_ABOUT;Om
-GENERAL_CANCEL;Annuler
-GENERAL_DISABLE;Fravælg
-GENERAL_DISABLED;Fravalgt
-GENERAL_ENABLE;Vælg
-GENERAL_ENABLED;Valgt
-GENERAL_LANDSCAPE;Bredformat
-GENERAL_NA;Ikke muligt
-GENERAL_NO;Nej
-GENERAL_OK;OK
-GENERAL_PORTRAIT;Højformat
-GENERAL_SAVE;Gem
-HISTOGRAM_TOOLTIP_B;Vis/skjul blåt histogram
-HISTOGRAM_TOOLTIP_G;Vis/skjul grønt histogram
-HISTOGRAM_TOOLTIP_L;Vis/skjul CIELAB histogram
-HISTOGRAM_TOOLTIP_R;Vis/skjul rødt histogram
-HISTORY_CHANGED;Ændret
-HISTORY_CUSTOMCURVE;Tilpasset kurve
-HISTORY_FROMCLIPBOARD;Fra udklipsholder
-HISTORY_LABEL;Historie
-HISTORY_MSG_1;Foto indlæst
-HISTORY_MSG_2;Profil indlæst
-HISTORY_MSG_3;Profil ændret
-HISTORY_MSG_4;Gennemse historie
-HISTORY_MSG_5;Lysstyrke
-HISTORY_MSG_6;Kontrast
-HISTORY_MSG_7;Sort
-HISTORY_MSG_8;Eksponeringskompensation
-HISTORY_MSG_9;Kompensation af højlys
-HISTORY_MSG_10;Skyggereduktion
-HISTORY_MSG_11;Tonekurve
-HISTORY_MSG_12;Autoeksponering
-HISTORY_MSG_13;Eksponeringsadvarsel
-HISTORY_MSG_14;Lysstyrke
-HISTORY_MSG_15;Kontrast
-HISTORY_MSG_16;Sort
-HISTORY_MSG_17;Reduktion af højlys.
-HISTORY_MSG_18;Reduktion af skygger
-HISTORY_MSG_19;Kurve
-HISTORY_MSG_20;Skarphed
-HISTORY_MSG_21;Skarphed radius
-HISTORY_MSG_22;Skarphed mængde
-HISTORY_MSG_23;Skarphed tærskel
-HISTORY_MSG_24;Gør kun kanter skarpere
-HISTORY_MSG_25;Skarphed kantdetektion radius
-HISTORY_MSG_26;Skarphed kantolerance
-HISTORY_MSG_27;Skarphed halo-kontrol
-HISTORY_MSG_28;Halo-kontrol mængde
-HISTORY_MSG_29;Skarphedsmetode
-HISTORY_MSG_30;Udfoldning radius
-HISTORY_MSG_31;Udfoldning mængde
-HISTORY_MSG_32;Udfoldning dæmpning
-HISTORY_MSG_33;Udfoldning gentagelser
-HISTORY_MSG_34;Undgå farveklipning
-HISTORY_MSG_35;Mætningsbegrænser
-HISTORY_MSG_36;Mætningsgrænse
-HISTORY_MSG_37;Forstærk farver
-HISTORY_MSG_38;Hvidbalancemetode
-HISTORY_MSG_39;Farvetemoeratur
-HISTORY_MSG_40;Hvidbalance nuance
-HISTORY_MSG_41;Farveskift "A"
-HISTORY_MSG_42;Farveskift "B"
-HISTORY_MSG_43;Begræns lysstøj
-HISTORY_MSG_44;Lysstøj radius
-HISTORY_MSG_45;Lysstæj kanttolerance
-HISTORY_MSG_46;Begræns farvestøj
-HISTORY_MSG_47;Farvestøj radius
-HISTORY_MSG_48;Farvestøj kanttolerance
-HISTORY_MSG_49;Kantfølsomhed farvestøj
-HISTORY_MSG_50;Skygger/højlys værktøj
-HISTORY_MSG_51;Forstærk højlys
-HISTORY_MSG_52;Forstærk skygger
-HISTORY_MSG_53;Højlys toneomfang
-HISTORY_MSG_54;Skygger toneomfang
-HISTORY_MSG_55;Lokal kontrast
-HISTORY_MSG_56;Skygger/højlys radius
-HISTORY_MSG_57;Grov rotering
-HISTORY_MSG_58;Vend vandret
-HISTORY_MSG_59;Vend lodret
-HISTORY_MSG_60;Roter
-HISTORY_MSG_61;Roter
-HISTORY_MSG_62;Ret objektivfejl
-HISTORY_MSG_63;Snapshot valgt
-HISTORY_MSG_64;Beskær billede
-HISTORY_MSG_65;Kromatisk aberration
-HISTORY_MSG_66;Red højlys
-HISTORY_MSG_67;Red højlys mængde
-HISTORY_MSG_68;Red højlys metode
-HISTORY_MSG_69;Nuværende farverum
-HISTORY_MSG_70;Output farverum
-HISTORY_MSG_71;Input farverum
-HISTORY_MSG_72;Vignettering
-HISTORY_MSG_73;Kanalmixer
-HISTORY_MSG_74;Skift størrelse mål
-HISTORY_MSG_75;Skift størrelse metode
-HISTORY_MSG_76;Exif metadata
-HISTORY_MSG_77;IPTC metadata
-HISTORY_MSG_78;Data specified for resize
-HISTORY_MSG_79;Resize width
-HISTORY_MSG_80;Resize height
-HISTORY_MSG_81;Resize enabled
-HISTORY_NEWSNAPSHOT;Tilføj...
-HISTORY_SNAPSHOT;Snapshot
-HISTORY_SNAPSHOTS;Snapshots
-IPTCPANEL_CATEGORY;Kategori
-IPTCPANEL_CITY;By
-IPTCPANEL_COPYHINT;Kopier IPTC-indstillinger til udklipsholder.
-IPTCPANEL_COUNTRY;Land
-IPTCPANEL_CREDIT;Anerkendelse
-IPTCPANEL_CREDITHINT;Identificerer den, der stiller billedet til rådighed, ikke nødvendigvis ejeren/skaberen.
-IPTCPANEL_DATECREATED;Dato skabt
-IPTCPANEL_EMBEDDED;Indlejret
-IPTCPANEL_EMBEDDEDHINT;Genskab til indlejrede IPTC-data i billedfilen
-IPTCPANEL_HEADLINE;Overskrift
-IPTCPANEL_INSTRUCTIONS;Instruktioner
-IPTCPANEL_KEYWORDS;Søgeord
-IPTCPANEL_PASTEHINT;Indsæt IPTC-indstillinger fra udklipsholder
-IPTCPANEL_RESET;Genskab
-IPTCPANEL_RESETHINT;Genskab til profilstandard
-IPTCPANEL_SOURCE;Kilde
-IPTCPANEL_TITLE;Titel
-MAIN_BUTTON_PREFERENCES;Indstillinger
-MAIN_BUTTON_SAVE;Gem billede
-MAIN_BUTTON_SENDTOEDITOR;Send til redigeringsprogram
-MAIN_FRAME_BATCHQUEUE;Batch Queue
-MAIN_FRAME_FILEBROWSER;File Browser
-MAIN_FRAME_PLACES;Places
-MAIN_FRAME_PLACES_ADD;Add
-MAIN_FRAME_RECENT;Recent Folders
-MAIN_MSG_ALREADYEXISTS;Filen eksisterer allerede.
-MAIN_MSG_CANNOTLOAD;Kan ikke indlæse billede
-MAIN_MSG_CANNOTSAVE;Kan ikke gemme filen
-MAIN_MSG_CANNOTSTARTEDITOR;Kan ikke starte redigeringsprogram.
-MAIN_MSG_CANNOTSTARTEDITOR_SECONDARY;Brug venligst den korrekte sti i dialogboksen "Indstillinger".
-MAIN_MSG_QOVERWRITE;Vil du overskrive?
-MAIN_TAB_COLOR;Farver
-MAIN_TAB_DETAIL;Detaljer
-MAIN_TAB_DEVELOP;Develop
-MAIN_TAB_EXIF;Exif
-MAIN_TAB_EXPOSURE;Eksponering
-MAIN_TAB_FILTER;Filter
-MAIN_TAB_IPTC;IPTC
-MAIN_TAB_METADATA;Metadata
-MAIN_TAB_TRANSFORM;Justér
-MAIN_TOOLTIP_HIDEHP;Vis/skjul panelet til venstre (heriblandt Historie, genvejstast: H)
-MAIN_TOOLTIP_INDCLIPPEDH;Markér udbrændte højlys
-MAIN_TOOLTIP_INDCLIPPEDS;Markér udbrændte skygger
-MAIN_TOOLTIP_QINFO;Udvalgte oplysninger om billedet
-PARTIALPASTE_BASICGROUP;Grundlæggende indstillinger
-PARTIALPASTE_CACORRECTION;Kromatisk aberration
-PARTIALPASTE_COARSETRANS;Drej/vend 90 grader
-PARTIALPASTE_COLORGROUP;Farverelaterede indstillinger
-PARTIALPASTE_COMPOSITIONGROUP;Kompositionsindstillinger
-PARTIALPASTE_CROP;Beskær
-PARTIALPASTE_DIALOGLABEL;Delvist indsætte bearbejdningsprofil
-PARTIALPASTE_DISTORTION;Fortegning
-PARTIALPASTE_EXIFCHANGES;Ændringer til exif-data
-PARTIALPASTE_EXPOSURE;Eksponering
-PARTIALPASTE_ICMSETTINGS;ICM-indstillinger
-PARTIALPASTE_IPTCINFO;IPTC-info
-PARTIALPASTE_LENSGROUP;Objektivrelaterede indstillinger
-PARTIALPASTE_METAGROUP;Metadata
-PARTIALPASTE_RESIZE;Ret størrelse
-PARTIALPASTE_ROTATION;Rotér
-PARTIALPASTE_SHADOWSHIGHLIGHTS;Skygger/Højlys
-PARTIALPASTE_SHARPENING;Skarphed
-PARTIALPASTE_VIGNETTING;Vignettering
-PARTIALPASTE_WHITEBALANCE;Hvidbalance
-PREFERENCES_APPLNEXTSTARTUP;Anvendes ved næste opstart
-PREFERENCES_CACHEMAXENTRIES;Maksimalt antal indskrivninger i cache
-PREFERENCES_CACHEOPTS;Cache-indstillinger
-PREFERENCES_CACHETHUMBHEIGHT;Maksimal miniaturehøjde
-PREFERENCES_CLIPPINGIND;Indikator for udbrændte områder
-PREFERENCES_DATEFORMAT;Datoformat
-PREFERENCES_DATEFORMATHINT;Du kan bruge følgende formatindstillinger:\n%y : år\n%m : måned\n%d : dag\n\nDet typiske datoformat i danmark er:\n%d/%m/%y
-PREFERENCES_DIRHOME;Standardmappe
-PREFERENCES_DIRLAST;Sidst anvendte mappe
-PREFERENCES_DIROTHER;Andet
-PREFERENCES_DIRSELECTDLG;Vælg startmappe...
-PREFERENCES_DIRSOFTWARE;Installationsmappe
-PREFERENCES_EXTERNALEDITOR;Eksternt redigeringsprogram
-PREFERENCES_FBROWSEROPTS;Indstllinger til filbrowser
-PREFERENCES_FILEFORMAT;Filformat
-PREFERENCES_FORIMAGE;Til billedfiler
-PREFERENCES_FORRAW;Til RAW-filer
-PREFERENCES_GIMPPATH;Installationsmappe til GIMP
-PREFERENCES_HLTHRESHOLD;Tærskel for udbrændte højlys
-PREFERENCES_ICCDIR;Mappe med ICC-profiler
-PREFERENCES_IMPROCPARAMS;Normale billedbehandlingsparametre
-PREFERENCES_INTENT_ABSOLUTE;Absolut Colorimetrisk
-PREFERENCES_INTENT_PERCEPTUAL;Opfattelsesorienteret
-PREFERENCES_INTENT_RELATIVE;Relativ Colorimetrisk
-PREFERENCES_INTENT_SATURATION;Mætning
-PREFERENCES_OUTDIR;Output-mappe
-PREFERENCES_OUTDIRFOLDER;Gem i mappe
-PREFERENCES_OUTDIRFOLDERHINT;Læg det gemte billede i den valgte mappe
-PREFERENCES_OUTDIRTEMPLATE;Brug skabelon
-PREFERENCES_OUTDIRTEMPLATEHINT;Du kan benytte følgende formatstrenge:\n%f, %d1, %d2, ..., %p1, %p2, ...\n\nDisse formatstrenge henviser til mapperne og undermapperne for RAW-filens sti.\n\nFx, hvis filen /Users\Peter\Pictures/02-09-2006/dsc0012.nefer blevet åbnet, er betydningen af formatstrengen:\n%f=dsc0012, %d1=02-09-2006, %d2=image, ...\n%p1=/Users\Peter\Pictures/02-09-2006, %p2=/Users\Peter\Pictures, p3=/Users\Peter\Pictures, ...\n\nhvis du vil gemme output-billedet i samme mappe som originalen, skal du skrive:\n%p1/%f\n\nHvis du vil gemme output-billedet i en mappe, der hedder 'konverteret', som er placeret i originalens mappe, skal du skrive:\n%p1/konverteret/%f\n\nHvis du vil gemme output-billedet i mappen Users\Peter\Pictures\konverteret og beholde den samme undermappe med dato, skal du skrive:\n%p2/konverteret/%d1/%f
-PREFERENCES_PARSEDEXT;Indlæste filtyper
-PREFERENCES_PARSEDEXTADD;Tilføj filtype
-PREFERENCES_PARSEDEXTADDHINT;Indtast en filendelse, og klik her for at tilføje til listen
-PREFERENCES_PARSEDEXTDELHINT;Slet valgte filtype fra listen
-PREFERENCES_PROFILEHANDLING;Bearbejder profilbehandling
-PREFERENCES_PROFILELOADPR;Profilindlæsningsrækkefølge
-PREFERENCES_PROFILEPRCACHE;Profil i cache
-PREFERENCES_PROFILEPRFILE;Profil sammen med input-filen
-PREFERENCES_PROFILESAVECACHE;Gem bearbejdningsparametre i cache
-PREFERENCES_PROFILESAVEINPUT;Gem bearbejdningsparametre sammen med input-filen
-PREFERENCES_PSPATH;Installationsmappe til Adobe Photoshop
-PREFERENCES_SELECTLANG;Vælg sprog
-PREFERENCES_SHOWBASICEXIF;Vis grundlæggende exif-data
-PREFERENCES_SHOWDATETIME;Vis dato og tid
-PREFERENCES_SHTHRESHOLD;Tærskel for udbrændte skygger
-PREFERENCES_STARTUPIMDIR;Billedmappe ved opstart
-PREFERENCES_TAB_BROWSER;Filbrowser
-PREFERENCES_TAB_COLORMGR;Farvestyring
-PREFERENCES_TAB_GENERAL;Generelt
-PREFERENCES_TAB_IMPROC;Billedbehandling
-PROFILEPANEL_LABEL;Efterbehandlingsprofiler
-PROFILEPANEL_LOADDLGLABEL;Indlæs efterbehandlingsparametre...
-PROFILEPANEL_PCUSTOM;Brugervalgt
-PROFILEPANEL_PFILE;Fra fil
-PROFILEPANEL_PLASTSAVED;Senest gemte
-PROFILEPANEL_SAVEDLGLABEL;Gem efterbehandlingsparametre...
-PROFILEPANEL_TOOLTIPCOPY;Kopier nuværende profil til udklipsholder
-PROFILEPANEL_TOOLTIPLOAD;Indlæs en profil fra fil
-PROFILEPANEL_TOOLTIPPASTE; Indsæt profil fra udklipsholder
-PROFILEPANEL_TOOLTIPSAVE;Gem nuværende profil
-PROGRESSBAR_LOADING;Indlæser billede...
-PROGRESSBAR_LOADJPEG;Indlæser JPEG-fil...
-PROGRESSBAR_LOADPNG;Indlæser PNG-fil...
-PROGRESSBAR_LOADTIFF;Indlæser TIFF-fil...
-PROGRESSBAR_PROCESSING;bearbejder billede...
-PROGRESSBAR_READY;Klar
-PROGRESSBAR_SAVEJPEG;Gemmer JPEG-fil...
-PROGRESSBAR_SAVEPNG;Gemmer PNG-fil...
-PROGRESSBAR_SAVETIFF;Gemmer TIFF-fil...
-QINFO_ISO;ISO
-QINFO_NOEXIF;Exif-data ikke tilgængelig.
-SAVEDLG_FILEFORMAT;Filformat
-SAVEDLG_JPEGQUAL;JPEG-kvalitet
-SAVEDLG_PNGCOMPR;PNG-komprimering
-SAVEDLG_PUTTOQUEUE;Sæt i bearbejdningskø
-SAVEDLG_PUTTOQUEUEHEAD;Sæt i begyndelsen af bearbejdningskøen
-SAVEDLG_PUTTOQUEUETAIL;Sæt i enden af bearbejdningskøen
-SAVEDLG_SAVEIMMEDIATELY;Gem med det samme
-SAVEDLG_SAVESPP;Gem bearbejdningsparametre med billede
-TOOLBAR_TOOLTIP_CROP;Beskær markering (Genvejstast: C)
-TOOLBAR_TOOLTIP_HAND;Håndværktøj (Genvejstast: N)
-TOOLBAR_TOOLTIP_STRAIGHTEN;Ret op (Genvejstast: S)
-TOOLBAR_TOOLTIP_WB;Vælg hvidbalance (Genvejstast: W)
-TP_CACORRECTION_BLUE;Blå
-TP_CACORRECTION_LABEL;Kromatisk aberration
-TP_CACORRECTION_RED;Rød
-TP_CHMIXER_BLUE;Blå
-TP_CHMIXER_GREEN;Grøn
-TP_CHMIXER_LABEL;Kanalmixer
-TP_CHMIXER_RED;Rød
-TP_COARSETRAF_TOOLTIP_HFLIP;Vend vandret
-TP_COARSETRAF_TOOLTIP_ROTLEFT;Rotér mod uret
-TP_COARSETRAF_TOOLTIP_ROTRIGHT;Rotér med uret
-TP_COARSETRAF_TOOLTIP_VFLIP;Vend lodret
-TP_CROP_FIXRATIO;Fasthold sideforhold:
-TP_CROP_GTDIAGONALS;Reglen om diagonaler
-TP_CROP_GTNONE;Ingen
-TP_CROP_GTRULETHIRDS;Reglen om tredjedele
-TP_CROP_GUIDETYPE;Hjælpelinjer:
-TP_CROP_H;H
-TP_CROP_LABEL;Beskær
-TP_CROP_W;B
-TP_CROP_X;x
-TP_CROP_Y;y
-TP_DISTORTION_AMOUNT;Mængde
-TP_DISTORTION_LABEL;Fortegning
-TP_EXPOSURE_AUTOLEVELS;Auto-niveauer
-TP_EXPOSURE_BLACKLEVEL;Sort
-TP_EXPOSURE_BRIGHTNESS;Lysstyrke
-TP_EXPOSURE_CLIP;Klip
-TP_EXPOSURE_COMPRHIGHLIGHTS;Komprimering af højlys
-TP_EXPOSURE_COMPRSHADOWS;Komprimering af skygger
-TP_EXPOSURE_CONTRAST;Kontrast
-TP_EXPOSURE_CURVEEDITOR;Tonekurve
-TP_EXPOSURE_EXPCOMP;Eksp. komp.
-TP_EXPOSURE_LABEL;Eksponering
-TP_HLREC_CIELAB;CIELab blanding
-TP_HLREC_COLOR;Farveudbredelse
-TP_HLREC_LABEL;Red højlys
-TP_HLREC_LUMINANCE;Red lysforhold
-TP_HLREC_METHOD;Metode:
-TP_ICM_INPUTCAMERA;Kamerastandard
-TP_ICM_INPUTCUSTOM;Brugervalgt
-TP_ICM_INPUTDLGLABEL;Vælg input ICC-profil...
-TP_ICM_INPUTEMBEDDED;Brug indlejrede, hvis muligt
-TP_ICM_INPUTPROFILE;Input profil
-TP_ICM_LABEL;ICM
-TP_ICM_NOICM;No ICM: sRGB output
-TP_ICM_OUTPUTPROFILE;Output profil
-TP_ICM_WORKINGPROFILE;Arbejdsprofil
-TP_RAW_DMETHOD;Metode
-TP_RAW_FALSECOLOR;Antal trin til undertrykkelse af forkert farve
-TP_RESIZE_H;H:
-TP_RESIZE_LABEL;Skift størrelse
-TP_RESIZE_METHOD;Metode:
-TP_RESIZE_NEAREST;Nærmeste
-TP_RESIZE_SCALE;Skalér
-TP_RESIZE_W;B:
-TP_ROTATE_DEGREE;Grader
-TP_ROTATE_LABEL;Rotér
-TP_ROTATE_SELECTLINE;Vælg lige linie
-TP_SHADOWSHLIGHTS_HIGHLIGHTS;Højlys
-TP_SHADOWSHLIGHTS_HLTONALW;Toneomfang
-TP_SHADOWSHLIGHTS_LABEL;Skygger/højlys
-TP_SHADOWSHLIGHTS_LOCALCONTR;Local kontrast
-TP_SHADOWSHLIGHTS_RADIUS;Radius
-TP_SHADOWSHLIGHTS_SHADOWS;Skygger
-TP_SHADOWSHLIGHTS_SHTONALW;Toneomfang
-TP_SHARPENING_AMOUNT;Mængde
-TP_SHARPENING_EDRADIUS;Radius
-TP_SHARPENING_EDTOLERANCE;Kanttolerance
-TP_SHARPENING_HALOCONTROL;Halo-kontrol
-TP_SHARPENING_HCAMOUNT;Mængde
-TP_SHARPENING_LABEL;Skarphed
-TP_SHARPENING_METHOD;Metode
-TP_SHARPENING_ONLYEDGES;Gør kun kanter skarpere
-TP_SHARPENING_RADIUS;Radius
-TP_SHARPENING_RLD;RL Udfoldning
-TP_SHARPENING_RLD_AMOUNT;Mængde
-TP_SHARPENING_RLD_DAMPING;Dæmpning
-TP_SHARPENING_RLD_ITERATIONS;Gentagelser
-TP_SHARPENING_THRESHOLD;Tærskel
-TP_SHARPENING_USM;Uskarp maske
-TP_VIGNETTING_AMOUNT;Mængde
-TP_VIGNETTING_LABEL;Vignettering
-TP_VIGNETTING_RADIUS;Radius
-TP_WBALANCE_AUTO;Auto
-TP_WBALANCE_CAMERA;Kamera
-TP_WBALANCE_CUSTOM;Brugervalgt
-TP_WBALANCE_GREEN;Nuance
-TP_WBALANCE_LABEL;Hvidbalance
-TP_WBALANCE_METHOD;Metode
-TP_WBALANCE_SIZE;Størrelse:
-TP_WBALANCE_SPOTWB;Mål WB
-TP_WBALANCE_TEMPERATURE;Temperatur
-
-!!!!!!!!!!!!!!!!!!!!!!!!!
-! Untranslated keys follow; remove the ! prefix after an entry is translated.
-!!!!!!!!!!!!!!!!!!!!!!!!!
-
-!ABOUT_TAB_BUILD;Version
-!ABOUT_TAB_CREDITS;Credits
-!ABOUT_TAB_LICENSE;License
-!ABOUT_TAB_RELEASENOTES;Release Notes
-!ABOUT_TAB_SPLASH;Splash
-!ADJUSTER_RESET_TO_DEFAULT;Click - reset to default value.\nCtrl+click - reset to initial value.
-!BATCHQUEUE_AUTOSTART;Auto-start
-!BATCHQUEUE_AUTOSTARTHINT;Start processing automatically when a new job arrives.
-!BATCHQUEUE_DESTFILENAME;Path and file name
-!BATCHQUEUE_STARTSTOPHINT;Start or stop processing the images in the queue.\n\nShortcut: Ctrl+s
-!BATCH_PROCESSING;Batch Processing
-!CURVEEDITOR_AXIS_IN;I:
-!CURVEEDITOR_AXIS_LEFT_TAN;LT:
-!CURVEEDITOR_AXIS_OUT;O:
-!CURVEEDITOR_AXIS_RIGHT_TAN;RT:
-!CURVEEDITOR_CATMULLROM;Flexible
-!CURVEEDITOR_CURVE;Curve
-!CURVEEDITOR_CURVES;Curves
-!CURVEEDITOR_CUSTOM;Standard
-!CURVEEDITOR_DARKS;Darks
-!CURVEEDITOR_EDITPOINT_HINT;Enable edition of node in/out values.\n\nRight-click on a node to select it.\nRight-click on empty space to de-select the node.
-!CURVEEDITOR_HIGHLIGHTS;Highlights
-!CURVEEDITOR_LIGHTS;Lights
-!CURVEEDITOR_MINMAXCPOINTS;Equalizer
-!CURVEEDITOR_NURBS;Control cage
-!CURVEEDITOR_PARAMETRIC;Parametric
-!CURVEEDITOR_SHADOWS;Shadows
-!CURVEEDITOR_TOOLTIPCOPY;Copy current curve to clipboard.
-!CURVEEDITOR_TOOLTIPPASTE;Paste curve from clipboard.
-!CURVEEDITOR_TYPE;Type:
-!DONT_SHOW_AGAIN;Don't show this message again.
-!DYNPROFILEEDITOR_DELETE;Delete
-!DYNPROFILEEDITOR_EDIT;Edit
-!DYNPROFILEEDITOR_EDIT_RULE;Edit Dynamic Profile Rule
-!DYNPROFILEEDITOR_ENTRY_TOOLTIP;The matching is case insensitive.\nUse the "re:" prefix to enter\na regular expression.
-!DYNPROFILEEDITOR_IMGTYPE_ANY;Any
-!DYNPROFILEEDITOR_IMGTYPE_HDR;HDR
-!DYNPROFILEEDITOR_IMGTYPE_PS;Pixel Shift
-!DYNPROFILEEDITOR_IMGTYPE_STD;Standard
-!DYNPROFILEEDITOR_MOVE_DOWN;Move Down
-!DYNPROFILEEDITOR_MOVE_UP;Move Up
-!DYNPROFILEEDITOR_NEW;New
-!DYNPROFILEEDITOR_NEW_RULE;New Dynamic Profile Rule
-!DYNPROFILEEDITOR_PROFILE;Processing Profile
-!EDITWINDOW_TITLE;Image Edit
-!EDIT_OBJECT_TOOLTIP;Displays a widget on the preview window which lets you adjust this tool.
-!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
-!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
-!EXIFFILTER_FILETYPE;File type
-!EXIFFILTER_IMAGETYPE;Image type
-!EXIFFILTER_METADATAFILTER;Enable metadata filters
-!EXIFPANEL_SHOWALL;Show all
-!EXPORT_BYPASS;Processing steps to bypass
-!EXPORT_BYPASS_ALL;Select / Unselect All
-!EXPORT_BYPASS_DEFRINGE;Bypass Defringe
-!EXPORT_BYPASS_DIRPYRDENOISE;Bypass Noise Reduction
-!EXPORT_BYPASS_DIRPYREQUALIZER;Bypass Contrast by Detail Levels
-!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
-!EXPORT_BYPASS_RAW_CA;Bypass [raw] Chromatic Aberration Correction
-!EXPORT_BYPASS_RAW_CCSTEPS;Bypass [raw] False Color Suppression
-!EXPORT_BYPASS_RAW_DCB_ENHANCE;Bypass [raw] DCB Enhancement Steps
-!EXPORT_BYPASS_RAW_DCB_ITERATIONS;Bypass [raw] DCB Iterations
-!EXPORT_BYPASS_RAW_DF;Bypass [raw] Dark-Frame
-!EXPORT_BYPASS_RAW_FF;Bypass [raw] Flat-Field
-!EXPORT_BYPASS_RAW_GREENTHRESH;Bypass [raw] Green Equilibration
-!EXPORT_BYPASS_RAW_LINENOISE;Bypass [raw] Line Noise Filter
-!EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Bypass [raw] LMMSE Enhancement Steps
-!EXPORT_BYPASS_SHARPENEDGE;Bypass Edge Sharpening
-!EXPORT_BYPASS_SHARPENING;Bypass Sharpening
-!EXPORT_BYPASS_SHARPENMICRO;Bypass Microcontrast
-!EXPORT_BYPASS_SH_HQ;Bypass Sharp Mask Shadows/Highlights
-!EXPORT_FASTEXPORTOPTIONS;Fast Export Options
-!EXPORT_INSTRUCTIONS;Fast Export options provide overrides to bypass time and resource consuming development settings and to run queue processing using the fast export settings instead. This method is recommended for quicker generation of lower resolution images when speed is a priority or when resized output is desired for one or many images without making modifications to their saved development parameters.
-!EXPORT_MAXHEIGHT;Maximum height:
-!EXPORT_MAXWIDTH;Maximum width:
-!EXPORT_PIPELINE;Processing pipeline
-!EXPORT_PUTTOQUEUEFAST; Put to queue for fast export
-!EXPORT_RAW_DMETHOD;Demosaic method
-!EXPORT_USE_FAST_PIPELINE;Dedicated (full processing on resized image)
-!EXPORT_USE_FAST_PIPELINE_TIP;Use a dedicated processing pipeline for images in Fast Export mode, that trades speed for quality. Resizing of the image is done as early as possible, instead of doing it at the end like in the normal pipeline. The speedup can be significant, but be prepared to see artifacts and a general degradation of output quality.
-!EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
-!EXTPROGTARGET_1;raw
-!EXTPROGTARGET_2;queue-processed
-!FILEBROWSER_ADDDELTEMPLATE;Add/Del templates...
-!FILEBROWSER_APPLYPROFILE_PARTIAL;Apply - partial
-!FILEBROWSER_AUTODARKFRAME;Auto dark-frame
-!FILEBROWSER_AUTOFLATFIELD;Auto flat-field
-!FILEBROWSER_BROWSEPATHBUTTONHINT;Click to open specified path, reload folder and apply "find" keywords.
-!FILEBROWSER_BROWSEPATHHINT;Type a path to navigate to.\n\nKeyboard shortcuts:\nCtrl-o to focus to the path text box.\nEnter / Ctrl-Enter to browse there;\nEsc to clear changes.\nShift-Esc to remove focus.\n\nPath shortcuts:\n~ - user's home directory.\n! - user's pictures directory
-!FILEBROWSER_CACHE;Cache
-!FILEBROWSER_CACHECLEARFROMFULL;Clear all including cached profiles
-!FILEBROWSER_CACHECLEARFROMPARTIAL;Clear all except cached profiles
-!FILEBROWSER_COLORLABEL_TOOLTIP;Color label.\n\nUse dropdown menu or shortcuts:\nShift-Ctrl-0 No Color\nShift-Ctrl-1 Red\nShift-Ctrl-2 Yellow\nShift-Ctrl-3 Green\nShift-Ctrl-4 Blue\nShift-Ctrl-5 Purple
-!FILEBROWSER_CURRENT_NAME;Current name:
-!FILEBROWSER_DARKFRAME;Dark-frame
-!FILEBROWSER_DELETEDLGMSGINCLPROC;Are you sure you want to delete the selected %1 files including a queue-processed version?
-!FILEBROWSER_EXTPROGMENU;Open with
-!FILEBROWSER_FLATFIELD;Flat-Field
-!FILEBROWSER_MOVETODARKFDIR;Move to dark-frames directory
-!FILEBROWSER_MOVETOFLATFIELDDIR;Move to flat-fields directory
-!FILEBROWSER_NEW_NAME;New name:
-!FILEBROWSER_OPENDEFAULTVIEWER;Windows default viewer (queue-processed)
-!FILEBROWSER_POPUPCOLORLABEL;Color label
-!FILEBROWSER_POPUPCOLORLABEL0;Label: None
-!FILEBROWSER_POPUPCOLORLABEL1;Label: Red
-!FILEBROWSER_POPUPCOLORLABEL2;Label: Yellow
-!FILEBROWSER_POPUPCOLORLABEL3;Label: Green
-!FILEBROWSER_POPUPCOLORLABEL4;Label: Blue
-!FILEBROWSER_POPUPCOLORLABEL5;Label: Purple
-!FILEBROWSER_POPUPCOPYTO;Copy to...
-!FILEBROWSER_POPUPFILEOPERATIONS;File operations
-!FILEBROWSER_POPUPMOVETO;Move to...
-!FILEBROWSER_POPUPPROCESSFAST;Put to queue (Fast export)
-!FILEBROWSER_POPUPPROFILEOPERATIONS;Processing profile operations
-!FILEBROWSER_POPUPRANK;Rank
-!FILEBROWSER_POPUPRANK0;Unrank
-!FILEBROWSER_POPUPRANK1;Rank 1 *
-!FILEBROWSER_POPUPRANK2;Rank 2 **
-!FILEBROWSER_POPUPRANK3;Rank 3 ***
-!FILEBROWSER_POPUPRANK4;Rank 4 ****
-!FILEBROWSER_POPUPRANK5;Rank 5 *****
-!FILEBROWSER_POPUPREMOVEINCLPROC;Delete with output from queue
-!FILEBROWSER_QUERYBUTTONHINT;Clear the Find query
-!FILEBROWSER_QUERYHINT;Type filenames to search for. Supports partial filenames. Separate the search terms using commas, e.g.\n1001,1004,1199\n\nExclude search terms by prefixing them with !=\ne.g.\n!=1001,1004,1199\n\nShortcuts:\nCtrl-f - focus the Find box,\nEnter - search,\nEsc - clear the Find box,\nShift-Esc - defocus the Find box.
-!FILEBROWSER_QUERYLABEL; Find:
-!FILEBROWSER_RANK1_TOOLTIP;Rank 1 *\nShortcut: Shift-1
-!FILEBROWSER_RANK2_TOOLTIP;Rank 2 *\nShortcut: Shift-2
-!FILEBROWSER_RANK3_TOOLTIP;Rank 3 *\nShortcut: Shift-3
-!FILEBROWSER_RANK4_TOOLTIP;Rank 4 *\nShortcut: Shift-4
-!FILEBROWSER_RANK5_TOOLTIP;Rank 5 *\nShortcut: Shift-5
-!FILEBROWSER_RESETDEFAULTPROFILE;Reset to default
-!FILEBROWSER_SELECTDARKFRAME;Select dark-frame...
-!FILEBROWSER_SELECTFLATFIELD;Select flat-field...
-!FILEBROWSER_SHOWCOLORLABEL1HINT;Show images labeled Red.\nShortcut: Alt-1
-!FILEBROWSER_SHOWCOLORLABEL2HINT;Show images labeled Yellow.\nShortcut: Alt-2
-!FILEBROWSER_SHOWCOLORLABEL3HINT;Show images labeled Green.\nShortcut: Alt-3
-!FILEBROWSER_SHOWCOLORLABEL4HINT;Show images labeled Blue.\nShortcut: Alt-4
-!FILEBROWSER_SHOWCOLORLABEL5HINT;Show images labeled Purple.\nShortcut: Alt-5
-!FILEBROWSER_SHOWEDITEDHINT;Show edited images.\nShortcut: 7
-!FILEBROWSER_SHOWEDITEDNOTHINT;Show not edited images.\nShortcut: 6
-!FILEBROWSER_SHOWEXIFINFO;Show Exif info.\n\nShortcuts:\ni - Multiple Editor Tabs Mode,\nAlt-i - Single Editor Tab Mode.
-!FILEBROWSER_SHOWNOTTRASHHINT;Show only non-deleted images.
-!FILEBROWSER_SHOWORIGINALHINT;Show only original images.\n\nWhen several images exist with the same filename but different extensions, the one considered original is the one whose extension is nearest the top of the parsed extensions list in Preferences > File Browser > Parsed Extensions.
-!FILEBROWSER_SHOWRECENTLYSAVEDHINT;Show saved images.\nShortcut: Alt-7
-!FILEBROWSER_SHOWRECENTLYSAVEDNOTHINT;Show unsaved images.\nShortcut: Alt-6
-!FILEBROWSER_SHOWUNCOLORHINT;Show images without a color label.\nShortcut: Alt-0
-!FILEBROWSER_UNRANK_TOOLTIP;Unrank.\nShortcut: Shift-0
-!FILECHOOSER_FILTER_ANY;All files
-!FILECHOOSER_FILTER_COLPROF;Color profiles (*.icc)
-!FILECHOOSER_FILTER_CURVE;Curve files
-!FILECHOOSER_FILTER_LCP;Lens correction profiles
-!FILECHOOSER_FILTER_PP;Processing profiles
-!FILECHOOSER_FILTER_SAME;Same format as current photo
-!FILECHOOSER_FILTER_TIFF;TIFF files
-!GENERAL_AFTER;After
-!GENERAL_APPLY;Apply
-!GENERAL_ASIMAGE;As Image
-!GENERAL_AUTO;Automatic
-!GENERAL_BEFORE;Before
-!GENERAL_CLOSE;Close
-!GENERAL_CURRENT;Current
-!GENERAL_FILE;File
-!GENERAL_NONE;None
-!GENERAL_OPEN;Open
-!GENERAL_RESET;Reset
-!GENERAL_SAVE_AS;Save as...
-!GENERAL_SLIDER;Slider
-!GENERAL_UNCHANGED;(Unchanged)
-!GENERAL_WARNING;Warning
-!GIMP_PLUGIN_INFO;Welcome to the RawTherapee GIMP plugin!\nOnce you are done editing, simply close the main RawTherapee window and the image will be automatically imported in GIMP.
-!HISTOGRAM_TOOLTIP_BAR;Show/Hide RGB indicator bar.
-!HISTOGRAM_TOOLTIP_CHRO;Show/Hide chromaticity histogram.
-!HISTOGRAM_TOOLTIP_MODE;Toggle between linear, log-linear and log-log scaling of the histogram.
-!HISTOGRAM_TOOLTIP_RAW;Show/Hide raw histogram.
-!HISTORY_MSG_82;Profile changed
-!HISTORY_MSG_83;S/H - Sharp mask
-!HISTORY_MSG_84;Perspective correction
-!HISTORY_MSG_85;Lens Correction - LCP file
-!HISTORY_MSG_86;RGB Curves - Luminosity mode
-!HISTORY_MSG_87;Impulse Noise Reduction
-!HISTORY_MSG_88;Impulse NR threshold
-!HISTORY_MSG_89;Noise Reduction
-!HISTORY_MSG_90;NR - Luminance
-!HISTORY_MSG_91;NR - Chrominance master
-!HISTORY_MSG_92;NR - Gamma
-!HISTORY_MSG_93;CbDL - Value
-!HISTORY_MSG_94;Contrast by Detail Levels
-!HISTORY_MSG_95;L*a*b* - Chromaticity
-!HISTORY_MSG_96;L*a*b* - a* curve
-!HISTORY_MSG_97;L*a*b* - b* curve
-!HISTORY_MSG_98;Demosaicing method
-!HISTORY_MSG_99;Hot pixel filter
-!HISTORY_MSG_100;Exposure - Saturation
-!HISTORY_MSG_101;HSV - Hue
-!HISTORY_MSG_102;HSV - Saturation
-!HISTORY_MSG_103;HSV - Value
-!HISTORY_MSG_104;HSV Equalizer
-!HISTORY_MSG_105;Defringe
-!HISTORY_MSG_106;Defringe - Radius
-!HISTORY_MSG_107;Defringe - Threshold
-!HISTORY_MSG_108;Exposure - HLC threshold
-!HISTORY_MSG_109;Resize - Bounding box
-!HISTORY_MSG_110;Resize - Applies to
-!HISTORY_MSG_111;L*a*b* - Avoid color shift
-!HISTORY_MSG_112;--unused--
-!HISTORY_MSG_113;L*a*b* - Red/skin prot.
-!HISTORY_MSG_114;DCB iterations
-!HISTORY_MSG_115;False color suppression
-!HISTORY_MSG_116;DCB enhancement
-!HISTORY_MSG_117;Raw CA correction - Red
-!HISTORY_MSG_118;Raw CA correction - Blue
-!HISTORY_MSG_119;Line noise filter
-!HISTORY_MSG_120;Green equilibration
-!HISTORY_MSG_121;Raw CA Correction - Auto
-!HISTORY_MSG_122;Dark-Frame - Auto-selection
-!HISTORY_MSG_123;Dark-Frame - File
-!HISTORY_MSG_124;White point correction
-!HISTORY_MSG_126;Flat-Field - File
-!HISTORY_MSG_127;Flat-Field - Auto-selection
-!HISTORY_MSG_128;Flat-Field - Blur radius
-!HISTORY_MSG_129;Flat-Field - Blur type
-!HISTORY_MSG_130;Auto distortion correction
-!HISTORY_MSG_131;NR - Luma
-!HISTORY_MSG_132;NR - Chroma
-!HISTORY_MSG_133;Output gamma
-!HISTORY_MSG_134;Free gamma
-!HISTORY_MSG_135;Free gamma
-!HISTORY_MSG_136;Free gamma slope
-!HISTORY_MSG_137;Black level - Green 1
-!HISTORY_MSG_138;Black level - Red
-!HISTORY_MSG_139;Black level - Blue
-!HISTORY_MSG_140;Black level - Green 2
-!HISTORY_MSG_141;Black level - Link greens
-!HISTORY_MSG_142;ES - Iterations
-!HISTORY_MSG_143;ES - Quantity
-!HISTORY_MSG_144;Microcontrast - Quantity
-!HISTORY_MSG_145;Microcontrast - Uniformity
-!HISTORY_MSG_146;Edge sharpening
-!HISTORY_MSG_147;ES - Luminance only
-!HISTORY_MSG_148;Microcontrast
-!HISTORY_MSG_149;Microcontrast - 3×3 matrix
-!HISTORY_MSG_150;Post-demosaic artifact/noise red.
-!HISTORY_MSG_151;Vibrance
-!HISTORY_MSG_152;Vib - Pastel tones
-!HISTORY_MSG_153;Vib - Saturated tones
-!HISTORY_MSG_154;Vib - Protect skin-tones
-!HISTORY_MSG_155;Vib - Avoid color shift
-!HISTORY_MSG_156;Vib - Link pastel/saturated
-!HISTORY_MSG_157;Vib - P/S threshold
-!HISTORY_MSG_158;TM - Strength
-!HISTORY_MSG_159;TM - Edge stopping
-!HISTORY_MSG_160;TM - Scale
-!HISTORY_MSG_161;TM - Reweighting iterates
-!HISTORY_MSG_162;Tone Mapping
-!HISTORY_MSG_163;RGB Curves - Red
-!HISTORY_MSG_164;RGB Curves - Green
-!HISTORY_MSG_165;RGB Curves - Blue
-!HISTORY_MSG_166;Exposure - Reset
-!HISTORY_MSG_167;Demosaicing method
-!HISTORY_MSG_168;L*a*b* - CC curve
-!HISTORY_MSG_169;L*a*b* - CH curve
-!HISTORY_MSG_170;Vibrance - HH curve
-!HISTORY_MSG_171;L*a*b* - LC curve
-!HISTORY_MSG_172;L*a*b* - Restrict LC
-!HISTORY_MSG_173;NR - Detail recovery
-!HISTORY_MSG_174;CIECAM02
-!HISTORY_MSG_175;CAM02 - CAT02 adaptation
-!HISTORY_MSG_176;CAM02 - Viewing surround
-!HISTORY_MSG_177;CAM02 - Scene luminosity
-!HISTORY_MSG_178;CAM02 - Viewing luminosity
-!HISTORY_MSG_179;CAM02 - White-point model
-!HISTORY_MSG_180;CAM02 - Lightness (J)
-!HISTORY_MSG_181;CAM02 - Chroma (C)
-!HISTORY_MSG_182;CAM02 - Automatic CAT02
-!HISTORY_MSG_183;CAM02 - Contrast (J)
-!HISTORY_MSG_184;CAM02 - Scene surround
-!HISTORY_MSG_185;CAM02 - Gamut control
-!HISTORY_MSG_186;CAM02 - Algorithm
-!HISTORY_MSG_187;CAM02 - Red/skin prot.
-!HISTORY_MSG_188;CAM02 - Brightness (Q)
-!HISTORY_MSG_189;CAM02 - Contrast (Q)
-!HISTORY_MSG_190;CAM02 - Saturation (S)
-!HISTORY_MSG_191;CAM02 - Colorfulness (M)
-!HISTORY_MSG_192;CAM02 - Hue (h)
-!HISTORY_MSG_193;CAM02 - Tone curve 1
-!HISTORY_MSG_194;CAM02 - Tone curve 2
-!HISTORY_MSG_195;CAM02 - Tone curve 1
-!HISTORY_MSG_196;CAM02 - Tone curve 2
-!HISTORY_MSG_197;CAM02 - Color curve
-!HISTORY_MSG_198;CAM02 - Color curve
-!HISTORY_MSG_199;CAM02 - Output histograms
-!HISTORY_MSG_200;CAM02 - Tone mapping
-!HISTORY_MSG_201;NR - Chrominance - R&G
-!HISTORY_MSG_202;NR - Chrominance - B&Y
-!HISTORY_MSG_203;NR - Color space
-!HISTORY_MSG_204;LMMSE enhancement steps
-!HISTORY_MSG_205;CAM02 - Hot/bad pixel filter
-!HISTORY_MSG_206;CAT02 - Auto scene luminosity
-!HISTORY_MSG_207;Defringe - Hue curve
-!HISTORY_MSG_208;WB - B/R equalizer
-!HISTORY_MSG_210;GF - Angle
-!HISTORY_MSG_211;Graduated Filter
-!HISTORY_MSG_212;VF - Strength
-!HISTORY_MSG_213;Vignette Filter
-!HISTORY_MSG_214;Black-and-White
-!HISTORY_MSG_215;B&W - CM - Red
-!HISTORY_MSG_216;B&W - CM - Green
-!HISTORY_MSG_217;B&W - CM - Blue
-!HISTORY_MSG_218;B&W - Gamma - Red
-!HISTORY_MSG_219;B&W - Gamma - Green
-!HISTORY_MSG_220;B&W - Gamma - Blue
-!HISTORY_MSG_221;B&W - Color filter
-!HISTORY_MSG_222;B&W - Presets
-!HISTORY_MSG_223;B&W - CM - Orange
-!HISTORY_MSG_224;B&W - CM - Yellow
-!HISTORY_MSG_225;B&W - CM - Cyan
-!HISTORY_MSG_226;B&W - CM - Magenta
-!HISTORY_MSG_227;B&W - CM - Purple
-!HISTORY_MSG_228;B&W - Luminance equalizer
-!HISTORY_MSG_229;B&W - Luminance equalizer
-!HISTORY_MSG_230;B&W - Mode
-!HISTORY_MSG_231;B&W - 'Before' curve
-!HISTORY_MSG_232;B&W - 'Before' curve type
-!HISTORY_MSG_233;B&W - 'After' curve
-!HISTORY_MSG_234;B&W - 'After' curve type
-!HISTORY_MSG_235;B&W - CM - Auto
-!HISTORY_MSG_236;--unused--
-!HISTORY_MSG_237;B&W - CM
-!HISTORY_MSG_238;GF - Feather
-!HISTORY_MSG_239;GF - Strength
-!HISTORY_MSG_240;GF - Center
-!HISTORY_MSG_241;VF - Feather
-!HISTORY_MSG_242;VF - Roundness
-!HISTORY_MSG_243;VC - Radius
-!HISTORY_MSG_244;VC - Strength
-!HISTORY_MSG_245;VC - Center
-!HISTORY_MSG_246;L*a*b* - CL curve
-!HISTORY_MSG_247;L*a*b* - LH curve
-!HISTORY_MSG_248;L*a*b* - HH curve
-!HISTORY_MSG_249;CbDL - Threshold
-!HISTORY_MSG_250;NR - Enhanced
-!HISTORY_MSG_251;B&W - Algorithm
-!HISTORY_MSG_252;CbDL - Skin tar/prot
-!HISTORY_MSG_253;CbDL - Reduce artifacts
-!HISTORY_MSG_254;CbDL - Skin hue
-!HISTORY_MSG_255;NR - Median filter
-!HISTORY_MSG_256;NR - Median - Type
-!HISTORY_MSG_257;Color Toning
-!HISTORY_MSG_258;CT - Color curve
-!HISTORY_MSG_259;CT - Opacity curve
-!HISTORY_MSG_260;CT - a*[b*] opacity
-!HISTORY_MSG_261;CT - Method
-!HISTORY_MSG_262;CT - b* opacity
-!HISTORY_MSG_263;CT - Shadows - Red
-!HISTORY_MSG_264;CT - Shadows - Green
-!HISTORY_MSG_265;CT - Shadows - Blue
-!HISTORY_MSG_266;CT - Mid - Red
-!HISTORY_MSG_267;CT - Mid - Green
-!HISTORY_MSG_268;CT - Mid - Blue
-!HISTORY_MSG_269;CT - High - Red
-!HISTORY_MSG_270;CT - High - Green
-!HISTORY_MSG_271;CT - High - Blue
-!HISTORY_MSG_272;CT - Balance
-!HISTORY_MSG_273;CT - Color Balance SMH
-!HISTORY_MSG_274;CT - Sat. Shadows
-!HISTORY_MSG_275;CT - Sat. Highlights
-!HISTORY_MSG_276;CT - Opacity
-!HISTORY_MSG_277;--unused--
-!HISTORY_MSG_278;CT - Preserve luminance
-!HISTORY_MSG_279;CT - Shadows
-!HISTORY_MSG_280;CT - Highlights
-!HISTORY_MSG_281;CT - Sat. strength
-!HISTORY_MSG_282;CT - Sat. threshold
-!HISTORY_MSG_283;CT - Strength
-!HISTORY_MSG_284;CT - Auto sat. protection
-!HISTORY_MSG_285;NR - Median - Method
-!HISTORY_MSG_286;NR - Median - Type
-!HISTORY_MSG_287;NR - Median - Iterations
-!HISTORY_MSG_288;Flat-Field - Clip control
-!HISTORY_MSG_289;Flat-Field - Clip control - Auto
-!HISTORY_MSG_290;Black Level - Red
-!HISTORY_MSG_291;Black Level - Green
-!HISTORY_MSG_292;Black Level - Blue
-!HISTORY_MSG_293;Film Simulation
-!HISTORY_MSG_294;Film Simulation - Strength
-!HISTORY_MSG_295;Film Simulation - Film
-!HISTORY_MSG_296;NR - Luminance curve
-!HISTORY_MSG_297;NR - Mode
-!HISTORY_MSG_298;Dead pixel filter
-!HISTORY_MSG_299;NR - Chrominance curve
-!HISTORY_MSG_300;-
-!HISTORY_MSG_301;NR - Luma control
-!HISTORY_MSG_302;NR - Chroma method
-!HISTORY_MSG_303;NR - Chroma method
-!HISTORY_MSG_304;W - Contrast levels
-!HISTORY_MSG_305;Wavelet Levels
-!HISTORY_MSG_306;W - Process
-!HISTORY_MSG_307;W - Process
-!HISTORY_MSG_308;W - Process direction
-!HISTORY_MSG_309;W - ES - Detail
-!HISTORY_MSG_310;W - Residual - Sky tar/prot
-!HISTORY_MSG_311;W - Wavelet levels
-!HISTORY_MSG_312;W - Residual - Shadows threshold
-!HISTORY_MSG_313;W - Chroma - Sat/past
-!HISTORY_MSG_314;W - Gamut - Reduce artifacts
-!HISTORY_MSG_315;W - Residual - Contrast
-!HISTORY_MSG_316;W - Gamut - Skin tar/prot
-!HISTORY_MSG_317;W - Gamut - Skin hue
-!HISTORY_MSG_318;W - Contrast - Highlight levels
-!HISTORY_MSG_319;W - Contrast - Highlight range
-!HISTORY_MSG_320;W - Contrast - Shadow range
-!HISTORY_MSG_321;W - Contrast - Shadow levels
-!HISTORY_MSG_322;W - Gamut - Avoid color shift
-!HISTORY_MSG_323;W - ES - Local contrast
-!HISTORY_MSG_324;W - Chroma - Pastel
-!HISTORY_MSG_325;W - Chroma - Saturated
-!HISTORY_MSG_326;W - Chroma - Method
-!HISTORY_MSG_327;W - Contrast - Apply to
-!HISTORY_MSG_328;W - Chroma - Link strength
-!HISTORY_MSG_329;W - Toning - Opacity RG
-!HISTORY_MSG_330;W - Toning - Opacity BY
-!HISTORY_MSG_331;W - Contrast levels - Extra
-!HISTORY_MSG_332;W - Tiling method
-!HISTORY_MSG_333;W - Residual - Shadows
-!HISTORY_MSG_334;W - Residual - Chroma
-!HISTORY_MSG_335;W - Residual - Highlights
-!HISTORY_MSG_336;W - Residual - Highlights threshold
-!HISTORY_MSG_337;W - Residual - Sky hue
-!HISTORY_MSG_338;W - ES - Radius
-!HISTORY_MSG_339;W - ES - Strength
-!HISTORY_MSG_340;W - Strength
-!HISTORY_MSG_341;W - Edge performance
-!HISTORY_MSG_342;W - ES - First level
-!HISTORY_MSG_343;W - Chroma levels
-!HISTORY_MSG_344;W - Meth chroma sl/cur
-!HISTORY_MSG_345;W - ES - Local contrast
-!HISTORY_MSG_346;W - ES - Local contrast method
-!HISTORY_MSG_347;W - Denoise - Level 1
-!HISTORY_MSG_348;W - Denoise - Level 2
-!HISTORY_MSG_349;W - Denoise - Level 3
-!HISTORY_MSG_350;W - ES - Edge detection
-!HISTORY_MSG_351;W - Residual - HH curve
-!HISTORY_MSG_352;W - Background
-!HISTORY_MSG_353;W - ES - Gradient sensitivity
-!HISTORY_MSG_354;W - ES - Enhanced
-!HISTORY_MSG_355;W - ES - Threshold low
-!HISTORY_MSG_356;W - ES - Threshold high
-!HISTORY_MSG_357;W - Denoise - Link with ES
-!HISTORY_MSG_358;W - Gamut - CH
-!HISTORY_MSG_359;Hot/Dead - Threshold
-!HISTORY_MSG_360;TM - Gamma
-!HISTORY_MSG_361;W - Final - Chroma balance
-!HISTORY_MSG_362;W - Residual - Compression method
-!HISTORY_MSG_363;W - Residual - Compression strength
-!HISTORY_MSG_364;W - Final - Contrast balance
-!HISTORY_MSG_365;W - Final - Delta balance
-!HISTORY_MSG_366;W - Residual - Compression gamma
-!HISTORY_MSG_367;W - Final - 'After' contrast curve
-!HISTORY_MSG_368;W - Final - Contrast balance
-!HISTORY_MSG_369;W - Final - Balance method
-!HISTORY_MSG_370;W - Final - Local contrast curve
-!HISTORY_MSG_371;Post-Resize Sharpening
-!HISTORY_MSG_372;PRS USM - Radius
-!HISTORY_MSG_373;PRS USM - Amount
-!HISTORY_MSG_374;PRS USM - Threshold
-!HISTORY_MSG_375;PRS USM - Sharpen only edges
-!HISTORY_MSG_376;PRS USM - Edge detection radius
-!HISTORY_MSG_377;PRS USM - Edge tolerance
-!HISTORY_MSG_378;PRS USM - Halo control
-!HISTORY_MSG_379;PRS USM - Halo control amount
-!HISTORY_MSG_380;PRS - Method
-!HISTORY_MSG_381;PRS RLD - Radius
-!HISTORY_MSG_382;PRS RLD - Amount
-!HISTORY_MSG_383;PRS RLD - Damping
-!HISTORY_MSG_384;PRS RLD - Iterations
-!HISTORY_MSG_385;W - Residual - Color Balance
-!HISTORY_MSG_386;W - Residual - CB green high
-!HISTORY_MSG_387;W - Residual - CB blue high
-!HISTORY_MSG_388;W - Residual - CB green mid
-!HISTORY_MSG_389;W - Residual - CB blue mid
-!HISTORY_MSG_390;W - Residual - CB green low
-!HISTORY_MSG_391;W - Residual - CB blue low
-!HISTORY_MSG_392;W - Residual - Color Balance
-!HISTORY_MSG_393;DCP - Look table
-!HISTORY_MSG_394;DCP - Baseline exposure
-!HISTORY_MSG_395;DCP - Base table
-!HISTORY_MSG_396;W - Contrast sub-tool
-!HISTORY_MSG_397;W - Chroma sub-tool
-!HISTORY_MSG_398;W - ES sub-tool
-!HISTORY_MSG_399;W - Residual sub-tool
-!HISTORY_MSG_400;W - Final sub-tool
-!HISTORY_MSG_401;W - Toning sub-tool
-!HISTORY_MSG_402;W - Denoise sub-tool
-!HISTORY_MSG_403;W - ES - Edge sensitivity
-!HISTORY_MSG_404;W - ES - Base amplification
-!HISTORY_MSG_405;W - Denoise - Level 4
-!HISTORY_MSG_406;W - ES - Neighboring pixels
-!HISTORY_MSG_407;Retinex - Method
-!HISTORY_MSG_408;Retinex - Radius
-!HISTORY_MSG_409;Retinex - Contrast
-!HISTORY_MSG_410;Retinex - Offset
-!HISTORY_MSG_411;Retinex - Strength
-!HISTORY_MSG_412;Retinex - Gaussian gradient
-!HISTORY_MSG_413;Retinex - Contrast
-!HISTORY_MSG_414;Retinex - Histogram - Lab
-!HISTORY_MSG_415;Retinex - Transmission
-!HISTORY_MSG_416;Retinex
-!HISTORY_MSG_417;Retinex - Transmission median
-!HISTORY_MSG_418;Retinex - Threshold
-!HISTORY_MSG_419;Retinex - Color space
-!HISTORY_MSG_420;Retinex - Histogram - HSL
-!HISTORY_MSG_421;Retinex - Gamma
-!HISTORY_MSG_422;Retinex - Gamma
-!HISTORY_MSG_423;Retinex - Gamma slope
-!HISTORY_MSG_424;Retinex - HL threshold
-!HISTORY_MSG_425;Retinex - Log base
-!HISTORY_MSG_426;Retinex - Hue equalizer
-!HISTORY_MSG_427;Output rendering intent
-!HISTORY_MSG_428;Monitor rendering intent
-!HISTORY_MSG_429;Retinex - Iterations
-!HISTORY_MSG_430;Retinex - Transmission gradient
-!HISTORY_MSG_431;Retinex - Strength gradient
-!HISTORY_MSG_432;Retinex - M - Highlights
-!HISTORY_MSG_433;Retinex - M - Highlights TW
-!HISTORY_MSG_434;Retinex - M - Shadows
-!HISTORY_MSG_435;Retinex - M - Shadows TW
-!HISTORY_MSG_436;Retinex - M - Radius
-!HISTORY_MSG_437;Retinex - M - Method
-!HISTORY_MSG_438;Retinex - M - Equalizer
-!HISTORY_MSG_439;Retinex - Process
-!HISTORY_MSG_440;CbDL - Method
-!HISTORY_MSG_441;Retinex - Gain transmission
-!HISTORY_MSG_442;Retinex - Scale
-!HISTORY_MSG_443;Output black point compensation
-!HISTORY_MSG_444;WB - Temp bias
-!HISTORY_MSG_445;Raw sub-image
-!HISTORY_MSG_449;PS - ISO adaption
-!HISTORY_MSG_452;PS - Show motion
-!HISTORY_MSG_453;PS - Show mask only
-!HISTORY_MSG_457;PS - Check red/blue
-!HISTORY_MSG_462;PS - Check green
-!HISTORY_MSG_464;PS - Blur motion mask
-!HISTORY_MSG_465;PS - Blur radius
-!HISTORY_MSG_468;PS - Fill holes
-!HISTORY_MSG_469;PS - Median
-!HISTORY_MSG_471;PS - Motion correction
-!HISTORY_MSG_472;PS - Smooth transitions
-!HISTORY_MSG_473;PS - Use LMMSE
-!HISTORY_MSG_474;PS - Equalize
-!HISTORY_MSG_475;PS - Equalize channel
-!HISTORY_MSG_476;CAM02 - Temp out
-!HISTORY_MSG_477;CAM02 - Green out
-!HISTORY_MSG_478;CAM02 - Yb out
-!HISTORY_MSG_479;CAM02 - CAT02 adaptation out
-!HISTORY_MSG_480;CAM02 - Automatic CAT02 out
-!HISTORY_MSG_481;CAM02 - Temp scene
-!HISTORY_MSG_482;CAM02 - Green scene
-!HISTORY_MSG_483;CAM02 - Yb scene
-!HISTORY_MSG_484;CAM02 - Auto Yb scene
-!HISTORY_MSG_485;Lens Correction
-!HISTORY_MSG_486;Lens Correction - Camera
-!HISTORY_MSG_487;Lens Correction - Lens
-!HISTORY_MSG_488;Dynamic Range Compression
-!HISTORY_MSG_489;DRC - Detail
-!HISTORY_MSG_490;DRC - Amount
-!HISTORY_MSG_491;White Balance
-!HISTORY_MSG_492;RGB Curves
-!HISTORY_MSG_493;L*a*b* Adjustments
-!HISTORY_MSG_CLAMPOOG;Clip out-of-gamut colors
-!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_AB;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_CHANNEL;CT - Channel
-!HISTORY_MSG_COLORTONING_LABREGION_CHROMATICITYMASK;CT - region C mask
-!HISTORY_MSG_COLORTONING_LABREGION_HUEMASK;CT - H mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESS;CT - Lightness
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESSMASK;CT - L mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIST;CT - List
-!HISTORY_MSG_COLORTONING_LABREGION_MASKBLUR;CT - region mask blur
-!HISTORY_MSG_COLORTONING_LABREGION_OFFSET;CT - region offset
-!HISTORY_MSG_COLORTONING_LABREGION_POWER;CT - region power
-!HISTORY_MSG_COLORTONING_LABREGION_SATURATION;CT - Saturation
-!HISTORY_MSG_COLORTONING_LABREGION_SHOWMASK;CT - region show mask
-!HISTORY_MSG_COLORTONING_LABREGION_SLOPE;CT - region slope
-!HISTORY_MSG_DEHAZE_DEPTH;Dehaze - Depth
-!HISTORY_MSG_DEHAZE_ENABLED;Haze Removal
-!HISTORY_MSG_DEHAZE_SHOW_DEPTH_MAP;Dehaze - Show depth map
-!HISTORY_MSG_DEHAZE_STRENGTH;Dehaze - Strength
-!HISTORY_MSG_DUALDEMOSAIC_AUTO_CONTRAST;Dual demosaic - Auto threshold
-!HISTORY_MSG_DUALDEMOSAIC_CONTRAST;Dual demosaic - Contrast threshold
-!HISTORY_MSG_HISTMATCHING;Auto-matched tone curve
-!HISTORY_MSG_ICM_OUTPUT_PRIMARIES;Output - Primaries
-!HISTORY_MSG_ICM_OUTPUT_TEMP;Output - ICC-v4 illuminant D
-!HISTORY_MSG_ICM_OUTPUT_TYPE;Output - Type
-!HISTORY_MSG_ICM_WORKING_GAMMA;Working - Gamma
-!HISTORY_MSG_ICM_WORKING_SLOPE;Working - Slope
-!HISTORY_MSG_ICM_WORKING_TRC_METHOD;Working - TRC method
-!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
-!HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness
-!HISTORY_MSG_LOCALCONTRAST_ENABLED;Local Contrast
-!HISTORY_MSG_LOCALCONTRAST_LIGHTNESS;Local Contrast - Lightness
-!HISTORY_MSG_LOCALCONTRAST_RADIUS;Local Contrast - Radius
-!HISTORY_MSG_METADATA_MODE;Metadata copy mode
-!HISTORY_MSG_MICROCONTRAST_CONTRAST;Microcontrast - Contrast threshold
-!HISTORY_MSG_PIXELSHIFT_DEMOSAIC;PS - Demosaic method for motion
-!HISTORY_MSG_PREPROCESS_LINEDENOISE_DIRECTION;Line noise filter direction
-!HISTORY_MSG_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!HISTORY_MSG_PRSHARPEN_CONTRAST;PRS - Contrast threshold
-!HISTORY_MSG_RAWCACORR_AUTOIT;Raw CA Correction - Iterations
-!HISTORY_MSG_RAWCACORR_COLORSHIFT;Raw CA Correction - Avoid color shift
-!HISTORY_MSG_RAW_BORDER;Raw border
-!HISTORY_MSG_RESIZE_ALLOWUPSCALING;Resize - Allow upscaling
-!HISTORY_MSG_SHARPENING_BLUR;Sharpening - Blur radius
-!HISTORY_MSG_SHARPENING_CONTRAST;Sharpening - Contrast threshold
-!HISTORY_MSG_SH_COLORSPACE;S/H - Colorspace
-!HISTORY_MSG_SOFTLIGHT_ENABLED;Soft light
-!HISTORY_MSG_SOFTLIGHT_STRENGTH;Soft light - Strength
-!HISTORY_MSG_TM_FATTAL_ANCHOR;DRC - Anchor
-!HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s
-!ICCPROFCREATOR_COPYRIGHT;Copyright:
-!ICCPROFCREATOR_COPYRIGHT_RESET_TOOLTIP;Reset to the default copyright, granted to "RawTherapee, CC0"
-!ICCPROFCREATOR_CUSTOM;Custom
-!ICCPROFCREATOR_DESCRIPTION;Description:
-!ICCPROFCREATOR_DESCRIPTION_ADDPARAM;Append gamma and slope values to the description
-!ICCPROFCREATOR_DESCRIPTION_TOOLTIP;Leave empty to set the default description.
-!ICCPROFCREATOR_GAMMA;Gamma
-!ICCPROFCREATOR_ICCVERSION;ICC version:
-!ICCPROFCREATOR_ILL;Illuminant:
-!ICCPROFCREATOR_ILL_41;D41
-!ICCPROFCREATOR_ILL_50;D50
-!ICCPROFCREATOR_ILL_55;D55
-!ICCPROFCREATOR_ILL_60;D60
-!ICCPROFCREATOR_ILL_65;D65
-!ICCPROFCREATOR_ILL_80;D80
-!ICCPROFCREATOR_ILL_DEF;Default
-!ICCPROFCREATOR_ILL_INC;StdA 2856K
-!ICCPROFCREATOR_ILL_TOOLTIP;You can only set the illuminant for ICC v4 profiles.
-!ICCPROFCREATOR_PRIMARIES;Primaries:
-!ICCPROFCREATOR_PRIM_ACESP0;ACES AP0
-!ICCPROFCREATOR_PRIM_ACESP1;ACES AP1
-!ICCPROFCREATOR_PRIM_ADOBE;Adobe RGB (1998)
-!ICCPROFCREATOR_PRIM_BEST;BestRGB
-!ICCPROFCREATOR_PRIM_BETA;BetaRGB
-!ICCPROFCREATOR_PRIM_BLUX;Blue X
-!ICCPROFCREATOR_PRIM_BLUY;Blue Y
-!ICCPROFCREATOR_PRIM_BRUCE;BruceRGB
-!ICCPROFCREATOR_PRIM_GREX;Green X
-!ICCPROFCREATOR_PRIM_GREY;Green Y
-!ICCPROFCREATOR_PRIM_PROPH;Prophoto
-!ICCPROFCREATOR_PRIM_REC2020;Rec2020
-!ICCPROFCREATOR_PRIM_REDX;Red X
-!ICCPROFCREATOR_PRIM_REDY;Red Y
-!ICCPROFCREATOR_PRIM_SRGB;sRGB
-!ICCPROFCREATOR_PRIM_TOOLTIP;You can only set custom primaries for ICC v4 profiles.
-!ICCPROFCREATOR_PRIM_WIDEG;Widegamut
-!ICCPROFCREATOR_PROF_V2;ICC v2
-!ICCPROFCREATOR_PROF_V4;ICC v4
-!ICCPROFCREATOR_SAVEDIALOG_TITLE;Save ICC profile as...
-!ICCPROFCREATOR_SLOPE;Slope
-!ICCPROFCREATOR_TRC_PRESET;Tone response curve:
-!IPTCPANEL_CATEGORYHINT;Identifies the subject of the image in the opinion of the provider.
-!IPTCPANEL_CITYHINT;Enter the name of the city pictured in this image.
-!IPTCPANEL_COPYRIGHT;Copyright notice
-!IPTCPANEL_COPYRIGHTHINT;Enter a Notice on the current owner of the Copyright for this image, such as ©2008 Jane Doe.
-!IPTCPANEL_COUNTRYHINT;Enter the name of the country pictured in this image.
-!IPTCPANEL_CREATOR;Creator
-!IPTCPANEL_CREATORHINT;Enter the name of the person that created this image.
-!IPTCPANEL_CREATORJOBTITLE;Creator's job title
-!IPTCPANEL_CREATORJOBTITLEHINT;Enter the Job Title of the person listed in the Creator field.
-!IPTCPANEL_DATECREATEDHINT;Enter the Date the image was taken.
-!IPTCPANEL_DESCRIPTION;Description
-!IPTCPANEL_DESCRIPTIONHINT;Enter a "caption" describing the who, what, and why of what is happening in this image, this might include names of people, and/or their role in the action that is taking place within the image.
-!IPTCPANEL_DESCRIPTIONWRITER;Description writer
-!IPTCPANEL_DESCRIPTIONWRITERHINT;Enter the name of the person involved in writing, editing or correcting the description of the image.
-!IPTCPANEL_HEADLINEHINT;Enter a brief publishable synopsis or summary of the contents of the image.
-!IPTCPANEL_INSTRUCTIONSHINT;Enter information about embargoes, or other restrictions not covered by the Copyright field.
-!IPTCPANEL_KEYWORDSHINT;Enter any number of keywords, terms or phrases used to express the subject matter in the image.
-!IPTCPANEL_PROVINCE;Province or state
-!IPTCPANEL_PROVINCEHINT;Enter the name of the province or state pictured in this image.
-!IPTCPANEL_SOURCEHINT;Enter or edit the name of a person or party who has a role in the content supply chain, such as a person or entity from whom you received this image from.
-!IPTCPANEL_SUPPCATEGORIES;Supplemental categories
-!IPTCPANEL_SUPPCATEGORIESHINT;Further refines the subject of the image.
-!IPTCPANEL_TITLEHINT;Enter a short verbal and human readable name for the image, this may be the file name.
-!IPTCPANEL_TRANSREFERENCE;Job ID
-!IPTCPANEL_TRANSREFERENCEHINT;Enter a number or identifier needed for workflow control or tracking.
-!MAIN_BUTTON_FULLSCREEN;Fullscreen
-!MAIN_BUTTON_ICCPROFCREATOR;ICC Profile Creator
-!MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4
-!MAIN_BUTTON_NAVPREV_TOOLTIP;Navigate to the previous image relative to image opened in the Editor.\nShortcut: Shift-F3\n\nTo navigate to the previous image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F3
-!MAIN_BUTTON_NAVSYNC_TOOLTIP;Synchronize the File Browser or Filmstrip with the Editor to reveal the thumbnail of the currently opened image, and clear any active filters.\nShortcut: x\n\nAs above, but without clearing active filters:\nShortcut: y\n(Note that the thumbnail of the opened image will not be shown if filtered out).
-!MAIN_BUTTON_PUTTOQUEUE_TOOLTIP;Put current image to processing queue.\nShortcut: Ctrl+b
-!MAIN_BUTTON_SAVE_TOOLTIP;Save current image.\nShortcut: Ctrl+s\nSave current profile (.pp3).\nShortcut: Ctrl+Shift+s
-!MAIN_BUTTON_SENDTOEDITOR_TOOLTIP;Edit current image in external editor.\nShortcut: Ctrl+e
-!MAIN_BUTTON_SHOWHIDESIDEPANELS_TOOLTIP;Show/hide all side panels.\nShortcut: m
-!MAIN_BUTTON_UNFULLSCREEN;Exit fullscreen
-!MAIN_FRAME_BATCHQUEUE_TOOLTIP;Processing queue.\nShortcut: Ctrl-F3
-!MAIN_FRAME_EDITOR;Editor
-!MAIN_FRAME_EDITOR_TOOLTIP;Editor.\nShortcut: Ctrl-F4
-!MAIN_FRAME_FILEBROWSER_TOOLTIP;File browser.\nShortcut: Ctrl-F2
-!MAIN_FRAME_PLACES_DEL;Remove
-!MAIN_MSG_EMPTYFILENAME;Filename unspecified!
-!MAIN_MSG_IMAGEUNPROCESSED;This command requires all selected images to be queue-processed first.
-!MAIN_MSG_NAVIGATOR;Navigator
-!MAIN_MSG_OPERATIONCANCELLED;Operation cancelled
-!MAIN_MSG_PATHDOESNTEXIST;The path\n\n%1\n\ndoes not exist. Please set a correct path in Preferences.
-!MAIN_MSG_SETPATHFIRST;You first have to set a target path in Preferences in order to use this function!
-!MAIN_MSG_TOOMANYOPENEDITORS;Too many open editors.\nPlease close an editor to continue.
-!MAIN_MSG_WRITEFAILED;Failed to write\n"%1"\n\nMake sure that the folder exists and that you have write permission to it.
-!MAIN_TAB_ADVANCED;Advanced
-!MAIN_TAB_ADVANCED_TOOLTIP;Shortcut: Alt-w
-!MAIN_TAB_COLOR_TOOLTIP;Shortcut: Alt-c
-!MAIN_TAB_DETAIL_TOOLTIP;Shortcut: Alt-d
-!MAIN_TAB_EXPORT; Fast Export
-!MAIN_TAB_EXPOSURE_TOOLTIP;Shortcut: Alt-e
-!MAIN_TAB_FAVORITES;Favorites
-!MAIN_TAB_FAVORITES_TOOLTIP;Shortcut: Alt-u
-!MAIN_TAB_INSPECT; Inspect
-!MAIN_TAB_METADATA_TOOLTIP;Shortcut: Alt-m
-!MAIN_TAB_RAW;Raw
-!MAIN_TAB_RAW_TOOLTIP;Shortcut: Alt-r
-!MAIN_TAB_TRANSFORM_TOOLTIP;Shortcut: Alt-t
-!MAIN_TOOLTIP_BACKCOLOR0;Background color of the preview: theme-based\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR1;Background color of the preview: black\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR2;Background color of the preview: white\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR3;Background color of the preview: middle grey\nShortcut: 9
-!MAIN_TOOLTIP_BEFOREAFTERLOCK;Lock / Unlock the Before view\n\nLock: keep the Before view unchanged.\nUseful to evaluate the cumulative effect of multiple tools.\nAdditionally, comparisons can be made to any state in the History.\n\nUnlock: the Before view will follow the After view one step behind, showing the image before the effect of the currently used tool.
-!MAIN_TOOLTIP_PREVIEWB;Preview the blue channel.\nShortcut: b
-!MAIN_TOOLTIP_PREVIEWFOCUSMASK;Preview the focus mask.\nShortcut: Shift-f\n\nMore accurate on images with shallow depth of field, low noise and at higher zoom levels.\nZoom out to 10-30% to improve detection accuracy on noisy images.
-!MAIN_TOOLTIP_PREVIEWG;Preview the green channel.\nShortcut: g
-!MAIN_TOOLTIP_PREVIEWL;Preview the luminosity.\nShortcut: v\n\n0.299*R + 0.587*G + 0.114*B
-!MAIN_TOOLTIP_PREVIEWR;Preview the red channel.\nShortcut: r
-!MAIN_TOOLTIP_PREVIEWSHARPMASK;Preview the sharpening contrast mask.\nShortcut: p\n\nOnly works when sharpening is enabled and zoom >= 100%.
-!MAIN_TOOLTIP_SHOWHIDELP1;Show/Hide the left panel.\nShortcut: l
-!MAIN_TOOLTIP_SHOWHIDERP1;Show/Hide the right panel.\nShortcut: Alt-l
-!MAIN_TOOLTIP_SHOWHIDETP1;Show/Hide the top panel.\nShortcut: Shift-l
-!MAIN_TOOLTIP_THRESHOLD;Threshold
-!MAIN_TOOLTIP_TOGGLE;Toggle the Before/After view.\nShortcut: Shift-b
-!MONITOR_PROFILE_SYSTEM;System default
-!NAVIGATOR_B;B:
-!NAVIGATOR_G;G:
-!NAVIGATOR_H;H:
-!NAVIGATOR_LAB_A;a*:
-!NAVIGATOR_LAB_B;b*:
-!NAVIGATOR_LAB_L;L*:
-!NAVIGATOR_NA; --
-!NAVIGATOR_R;R:
-!NAVIGATOR_S;S:
-!NAVIGATOR_V;V:
-!NAVIGATOR_XY_FULL;Width: %1, Height: %2
-!NAVIGATOR_XY_NA;x: --, y: --
-!OPTIONS_BUNDLED_MISSING;The bundled profile "%1" could not be found!\n\nYour installation could be damaged.\n\nDefault internal values will be used instead.
-!OPTIONS_DEFIMG_MISSING;The default profile for non-raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!OPTIONS_DEFRAW_MISSING;The default profile for raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!PARTIALPASTE_ADVANCEDGROUP;Advanced Settings
-!PARTIALPASTE_CHANNELMIXER;Channel mixer
-!PARTIALPASTE_CHANNELMIXERBW;Black-and-white
-!PARTIALPASTE_COLORAPP;CIECAM02
-!PARTIALPASTE_COLORTONING;Color toning
-!PARTIALPASTE_COMMONTRANSFORMPARAMS;Auto-fill
-!PARTIALPASTE_DARKFRAMEAUTOSELECT;Dark-frame auto-selection
-!PARTIALPASTE_DARKFRAMEFILE;Dark-frame file
-!PARTIALPASTE_DEFRINGE;Defringe
-!PARTIALPASTE_DEHAZE;Haze removal
-!PARTIALPASTE_DETAILGROUP;Detail Settings
-!PARTIALPASTE_DIRPYRDENOISE;Noise reduction
-!PARTIALPASTE_DIRPYREQUALIZER;Contrast by detail levels
-!PARTIALPASTE_EPD;Tone mapping
-!PARTIALPASTE_EQUALIZER;Wavelet levels
-!PARTIALPASTE_EVERYTHING;Everything
-!PARTIALPASTE_FILMSIMULATION;Film simulation
-!PARTIALPASTE_FLATFIELDAUTOSELECT;Flat-field auto-selection
-!PARTIALPASTE_FLATFIELDBLURRADIUS;Flat-field blur radius
-!PARTIALPASTE_FLATFIELDBLURTYPE;Flat-field blur type
-!PARTIALPASTE_FLATFIELDCLIPCONTROL;Flat-field clip control
-!PARTIALPASTE_FLATFIELDFILE;Flat-field file
-!PARTIALPASTE_GRADIENT;Graduated filter
-!PARTIALPASTE_HSVEQUALIZER;HSV equalizer
-!PARTIALPASTE_IMPULSEDENOISE;Impulse noise reduction
-!PARTIALPASTE_LABCURVE;L*a*b* adjustments
-!PARTIALPASTE_LENSPROFILE;Profiled lens correction
-!PARTIALPASTE_LOCALCONTRAST;Local contrast
-!PARTIALPASTE_METADATA;Metadata mode
-!PARTIALPASTE_PCVIGNETTE;Vignette filter
-!PARTIALPASTE_PERSPECTIVE;Perspective
-!PARTIALPASTE_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!PARTIALPASTE_PREPROCESS_GREENEQUIL;Green equilibration
-!PARTIALPASTE_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!PARTIALPASTE_PREPROCESS_LINEDENOISE;Line noise filter
-!PARTIALPASTE_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!PARTIALPASTE_PRSHARPENING;Post-resize sharpening
-!PARTIALPASTE_RAWCACORR_AUTO;CA auto-correction
-!PARTIALPASTE_RAWCACORR_AVOIDCOLORSHIFT;CA avoid color shift
-!PARTIALPASTE_RAWCACORR_CAREDBLUE;CA red & blue
-!PARTIALPASTE_RAWEXPOS_BLACK;Black levels
-!PARTIALPASTE_RAWEXPOS_LINEAR;White point correction
-!PARTIALPASTE_RAWGROUP;Raw Settings
-!PARTIALPASTE_RAW_BORDER;Raw border
-!PARTIALPASTE_RAW_DCBENHANCE;DCB enhancement
-!PARTIALPASTE_RAW_DCBITERATIONS;DCB iterations
-!PARTIALPASTE_RAW_DMETHOD;Demosaic method
-!PARTIALPASTE_RAW_FALSECOLOR;False color suppression
-!PARTIALPASTE_RAW_IMAGENUM;Sub-image
-!PARTIALPASTE_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!PARTIALPASTE_RAW_PIXELSHIFT;Pixel Shift
-!PARTIALPASTE_RETINEX;Retinex
-!PARTIALPASTE_RGBCURVES;RGB curves
-!PARTIALPASTE_SHARPENEDGE;Edges
-!PARTIALPASTE_SHARPENMICRO;Microcontrast
-!PARTIALPASTE_SOFTLIGHT;Soft light
-!PARTIALPASTE_TM_FATTAL;Dynamic range compression
-!PARTIALPASTE_VIBRANCE;Vibrance
-!PREFERENCES_ADD;Add
-!PREFERENCES_APPEARANCE;Appearance
-!PREFERENCES_APPEARANCE_COLORPICKERFONT;Color picker font
-!PREFERENCES_APPEARANCE_CROPMASKCOLOR;Crop mask color
-!PREFERENCES_APPEARANCE_MAINFONT;Main font
-!PREFERENCES_APPEARANCE_NAVGUIDECOLOR;Navigator guide color
-!PREFERENCES_APPEARANCE_THEME;Theme
-!PREFERENCES_AUTOMONPROFILE;Use operating system's main monitor color profile
-!PREFERENCES_AUTOSAVE_TP_OPEN;Save tool collapsed/expanded state on exit
-!PREFERENCES_BATCH_PROCESSING;Batch Processing
-!PREFERENCES_BEHADDALL;All to 'Add'
-!PREFERENCES_BEHADDALLHINT;Set all parameters to the Add mode.\nAdjustments of parameters in the batch tool panel will be deltas to the stored values.
-!PREFERENCES_BEHAVIOR;Behavior
-!PREFERENCES_BEHSETALL;All to 'Set'
-!PREFERENCES_BEHSETALLHINT;Set all parameters to the Set mode.\nAdjustments of parameters in the batch tool panel will be absolute, the actual values will be displayed.
-!PREFERENCES_BLACKBODY;Tungsten
-!PREFERENCES_CACHECLEAR;Clear
-!PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
-!PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
-!PREFERENCES_CACHECLEAR_ONLYPROFILES;Clear only cached processing profiles:
-!PREFERENCES_CACHECLEAR_SAFETY;Only files in the cache are cleared. Processing profiles stored alongside the source images are not touched.
-!PREFERENCES_CHUNKSIZES;Tiles per thread
-!PREFERENCES_CHUNKSIZE_RAW_AMAZE;AMaZE demosaic
-!PREFERENCES_CHUNKSIZE_RAW_CA;Raw CA correction
-!PREFERENCES_CHUNKSIZE_RAW_RCD;RCD demosaic
-!PREFERENCES_CHUNKSIZE_RAW_XT;Xtrans demosaic
-!PREFERENCES_CHUNKSIZE_RGB;RGB processing
-!PREFERENCES_CLUTSCACHE;HaldCLUT Cache
-!PREFERENCES_CLUTSCACHE_LABEL;Maximum number of cached CLUTs
-!PREFERENCES_CLUTSDIR;HaldCLUT directory
-!PREFERENCES_CMMBPC;Black point compensation
-!PREFERENCES_CROP;Crop Editing
-!PREFERENCES_CROP_AUTO_FIT;Automatically zoom to fit the crop
-!PREFERENCES_CROP_GUIDES;Guides shown when not editing the crop
-!PREFERENCES_CROP_GUIDES_FRAME;Frame
-!PREFERENCES_CROP_GUIDES_FULL;Original
-!PREFERENCES_CROP_GUIDES_NONE;None
-!PREFERENCES_CURVEBBOXPOS;Position of curve copy & paste buttons
-!PREFERENCES_CURVEBBOXPOS_ABOVE;Above
-!PREFERENCES_CURVEBBOXPOS_BELOW;Below
-!PREFERENCES_CURVEBBOXPOS_LEFT;Left
-!PREFERENCES_CURVEBBOXPOS_RIGHT;Right
-!PREFERENCES_CUSTPROFBUILD;Custom Processing Profile Builder
-!PREFERENCES_CUSTPROFBUILDHINT;Executable (or script) file called when a new initial processing profile should be generated for an image.\n\nThe path of the communication file (*.ini style, a.k.a. "Keyfile") is added as a command line parameter. It contains various parameters required for the scripts and image Exif to allow a rules-based processing profile generation.\n\nWARNING: You are responsible for using double quotes where necessary if you're using paths containing spaces.
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys format
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
-!PREFERENCES_CUSTPROFBUILDPATH;Executable path
-!PREFERENCES_D50;Settings in main menu
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_D55;5500K
-!PREFERENCES_D60;6000K
-!PREFERENCES_D65;6500K
-!PREFERENCES_DARKFRAMEFOUND;Found
-!PREFERENCES_DARKFRAMESHOTS;shots
-!PREFERENCES_DARKFRAMETEMPLATES;templates
-!PREFERENCES_DIRDARKFRAMES;Dark-frames directory
-!PREFERENCES_DIRECTORIES;Directories
-!PREFERENCES_EDITORCMDLINE;Custom command line
-!PREFERENCES_EDITORLAYOUT;Editor layout
-!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_FLATFIELDFOUND;Found
-!PREFERENCES_FLATFIELDSDIR;Flat-fields directory
-!PREFERENCES_FLATFIELDSHOTS;shots
-!PREFERENCES_FLATFIELDTEMPLATES;templates
-!PREFERENCES_FLUOF2;Fluorescent F2
-!PREFERENCES_FLUOF7;Fluorescent F7
-!PREFERENCES_FLUOF11;Fluorescent F11
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY;Output device's Yb luminance (%)
-!PREFERENCES_GREY05;Yb=05 CIE L#30
-!PREFERENCES_GREY10;Yb=10 CIE L#40
-!PREFERENCES_GREY15;Yb=15 CIE L#45
-!PREFERENCES_GREY18;Settings in main menu
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREY23;Yb=23 CIE L#55
-!PREFERENCES_GREY30;Yb=30 CIE L#60
-!PREFERENCES_GREY40;Yb=40 CIE L#70
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram in left panel
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
-!PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
-!PREFERENCES_INSPECT_LABEL;Inspect
-!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
-!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
-!PREFERENCES_INTERNALTHUMBIFUNTOUCHED;Show embedded JPEG thumbnail if raw is unedited
-!PREFERENCES_LANG;Language
-!PREFERENCES_LANGAUTODETECT;Use system language
-!PREFERENCES_MAXRECENTFOLDERS;Maximum number of recent folders
-!PREFERENCES_MENUGROUPEXTPROGS;Group "Open with"
-!PREFERENCES_MENUGROUPFILEOPERATIONS;Group "File operations"
-!PREFERENCES_MENUGROUPLABEL;Group "Color label"
-!PREFERENCES_MENUGROUPPROFILEOPERATIONS;Group "Processing profile operations"
-!PREFERENCES_MENUGROUPRANK;Group "Rank"
-!PREFERENCES_MENUOPTIONS;Context Menu Options
-!PREFERENCES_METADATA;Metadata
-!PREFERENCES_MONINTENT;Default rendering intent
-!PREFERENCES_MONITOR;Monitor
-!PREFERENCES_MONPROFILE;Default color profile
-!PREFERENCES_MONPROFILE_WARNOSX;Due to MacOS limitations, only sRGB is supported.
-!PREFERENCES_MULTITAB;Multiple Editor Tabs Mode
-!PREFERENCES_MULTITABDUALMON;Multiple Editor Tabs In Own Window Mode
-!PREFERENCES_NAVIGATIONFRAME;Navigation
-!PREFERENCES_OVERLAY_FILENAMES;Overlay filenames on thumbnails in the file browser
-!PREFERENCES_OVERLAY_FILENAMES_FILMSTRIP;Overlay filenames on thumbnails in the editor pannel
-!PREFERENCES_OVERWRITEOUTPUTFILE;Overwrite existing output files
-!PREFERENCES_PANFACTORLABEL;Pan rate amplification
-!PREFERENCES_PARSEDEXTDOWNHINT;Move selected extension down in the list.
-!PREFERENCES_PARSEDEXTUPHINT;Move selected extension up in the list.
-!PREFERENCES_PERFORMANCE_MEASURE;Measure
-!PREFERENCES_PERFORMANCE_MEASURE_HINT;Logs processing times in console
-!PREFERENCES_PERFORMANCE_THREADS;Threads
-!PREFERENCES_PERFORMANCE_THREADS_LABEL;Maximum number of threads for Noise Reduction and Wavelet Levels (0 = Automatic)
-!PREFERENCES_PREVDEMO;Preview Demosaic Method
-!PREFERENCES_PREVDEMO_FAST;Fast
-!PREFERENCES_PREVDEMO_LABEL;Demosaicing method used for the preview at <100% zoom:
-!PREFERENCES_PREVDEMO_SIDECAR;As in PP3
-!PREFERENCES_PRINTER;Printer (Soft-Proofing)
-!PREFERENCES_PROFILESAVEBOTH;Save processing profile both to the cache and next to the input file
-!PREFERENCES_PROFILESAVELOCATION;Processing profile saving location
-!PREFERENCES_PROFILE_NONE;None
-!PREFERENCES_PROPERTY;Property
-!PREFERENCES_PRTINTENT;Rendering intent
-!PREFERENCES_PRTPROFILE;Color profile
-!PREFERENCES_REMEMBERZOOMPAN;Remember zoom % and pan offset
-!PREFERENCES_REMEMBERZOOMPAN_TOOLTIP;Remember the zoom % and pan offset of the current image when opening a new image.\n\nThis option only works in "Single Editor Tab Mode" and when "Demosaicing method used for the preview at <100% zoom" is set to "As in PP3".
-!PREFERENCES_SAVE_TP_OPEN_NOW;Save tool collapsed/expanded state now
-!PREFERENCES_SERIALIZE_TIFF_READ;TIFF Read Settings
-!PREFERENCES_SERIALIZE_TIFF_READ_LABEL;Serialize reading of TIFF files
-!PREFERENCES_SERIALIZE_TIFF_READ_TOOLTIP;Enabling this option when working with folders containing uncompressed TIFF files can increase performance of thumbnail generation.
-!PREFERENCES_SET;Set
-!PREFERENCES_SHOWEXPOSURECOMPENSATION;Append exposure compensation
-!PREFERENCES_SHOWFILMSTRIPTOOLBAR;Show Filmstrip toolbar
-!PREFERENCES_SINGLETAB;Single Editor Tab Mode
-!PREFERENCES_SINGLETABVERTAB;Single Editor Tab Mode, Vertical Tabs
-!PREFERENCES_SND_BATCHQUEUEDONE;Queue processing done
-!PREFERENCES_SND_HELP;Enter a full file path to set a sound, or leave blank for no sound.\nFor system sounds on Windows use "SystemDefault", "SystemAsterisk" etc., and on Linux use "complete", "window-attention" etc.
-!PREFERENCES_SND_LNGEDITPROCDONE;Editor processing done
-!PREFERENCES_SND_THRESHOLDSECS;After seconds
-!PREFERENCES_TAB_DYNAMICPROFILE;Dynamic Profile Rules
-!PREFERENCES_TAB_PERFORMANCE;Performance
-!PREFERENCES_TAB_SOUND;Sounds
-!PREFERENCES_THUMBNAIL_INSPECTOR_JPEG;Embedded JPEG preview
-!PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TP_LABEL;Tool panel:
-!PREFERENCES_TP_VSCROLLBAR;Hide vertical scrollbar
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
-!PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-!PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
-!PREFERENCES_WORKFLOW;Layout
-!PROFILEPANEL_COPYPPASTE;Parameters to copy
-!PROFILEPANEL_GLOBALPROFILES;Bundled profiles
-!PROFILEPANEL_LOADPPASTE;Parameters to load
-!PROFILEPANEL_MODE_TIP;Processing profile fill mode.\n\nButton pressed: partial profiles will be converted to full profiles; the missing values will be replaced with hard-coded defaults.\n\nButton released: profiles will be applied as they are, altering only those values which they contain.
-!PROFILEPANEL_MYPROFILES;My profiles
-!PROFILEPANEL_PASTEPPASTE;Parameters to paste
-!PROFILEPANEL_PDYNAMIC;Dynamic
-!PROFILEPANEL_PINTERNAL;Neutral
-!PROFILEPANEL_SAVEPPASTE;Parameters to save
-!PROGRESSBAR_DECODING;Decoding...
-!PROGRESSBAR_GREENEQUIL;Green equilibration...
-!PROGRESSBAR_HLREC;Highlight reconstruction...
-!PROGRESSBAR_HOTDEADPIXELFILTER;Hot/dead pixel filter...
-!PROGRESSBAR_LINEDENOISE;Line noise filter...
-!PROGRESSBAR_LOADINGTHUMBS;Loading thumbnails...
-!PROGRESSBAR_NOIMAGES;No images found
-!PROGRESSBAR_PROCESSING_PROFILESAVED;Processing profile saved
-!PROGRESSBAR_RAWCACORR;Raw CA correction...
-!PROGRESSBAR_SNAPSHOT_ADDED;Snapshot added
-!PROGRESSDLG_PROFILECHANGEDINBROWSER;Processing profile changed in browser
-!QINFO_FRAMECOUNT;%2 frames
-!QINFO_HDR;HDR / %2 frame(s)
-!QINFO_PIXELSHIFT;Pixel Shift / %2 frame(s)
-!SAMPLEFORMAT_0;Unknown data format
-!SAMPLEFORMAT_1;8-bit unsigned
-!SAMPLEFORMAT_2;16-bit unsigned
-!SAMPLEFORMAT_4;24-bit LogLuv
-!SAMPLEFORMAT_8;32-bit LogLuv
-!SAMPLEFORMAT_16;16-bit floating-point
-!SAMPLEFORMAT_32;24-bit floating-point
-!SAMPLEFORMAT_64;32-bit floating-point
-!SAVEDLG_AUTOSUFFIX;Automatically add a suffix if the file already exists
-!SAVEDLG_FILEFORMAT_FLOAT; floating-point
-!SAVEDLG_FORCEFORMATOPTS;Force saving options
-!SAVEDLG_SUBSAMP;Subsampling
-!SAVEDLG_SUBSAMP_1;Best compression
-!SAVEDLG_SUBSAMP_2;Balanced
-!SAVEDLG_SUBSAMP_3;Best quality
-!SAVEDLG_SUBSAMP_TOOLTIP;Best compression:\nJ:a:b 4:2:0\nh/v 2/2\nChroma halved horizontally and vertically.\n\nBalanced:\nJ:a:b 4:2:2\nh/v 2/1\nChroma halved horizontally.\n\nBest quality:\nJ:a:b 4:4:4\nh/v 1/1\nNo chroma subsampling.
-!SAVEDLG_TIFFUNCOMPRESSED;Uncompressed TIFF
-!SAVEDLG_WARNFILENAME;File will be named
-!SHCSELECTOR_TOOLTIP;Click right mouse button to reset the position of those 3 sliders.
-!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
-!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!THRESHOLDSELECTOR_B;Bottom
-!THRESHOLDSELECTOR_BL;Bottom-left
-!THRESHOLDSELECTOR_BR;Bottom-right
-!THRESHOLDSELECTOR_HINT;Hold the Shift key to move individual control points.
-!THRESHOLDSELECTOR_T;Top
-!THRESHOLDSELECTOR_TL;Top-left
-!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
-!TP_BWMIX_ALGO;Algorithm OYCPM
-!TP_BWMIX_ALGO_LI;Linear
-!TP_BWMIX_ALGO_SP;Special effects
-!TP_BWMIX_ALGO_TOOLTIP;Linear: will produce a normal linear response.\nSpecial effects: will produce special effects by mixing channels non-linearly.
-!TP_BWMIX_AUTOCH;Auto
-!TP_BWMIX_CC_ENABLED;Adjust complementary color
-!TP_BWMIX_CC_TOOLTIP;Enable to allow automatic adjustment of complementary colors in ROYGCBPM mode.
-!TP_BWMIX_CHANNEL;Luminance equalizer
-!TP_BWMIX_CURVEEDITOR1;'Before' curve
-!TP_BWMIX_CURVEEDITOR2;'After' curve
-!TP_BWMIX_CURVEEDITOR_AFTER_TOOLTIP;Tone curve, after B&W conversion, at the end of treatment.
-!TP_BWMIX_CURVEEDITOR_BEFORE_TOOLTIP;Tone curve, just before B&W conversion.\nMay take into account the color components.
-!TP_BWMIX_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H).\nPay attention to extreme values as they may cause artifacts.
-!TP_BWMIX_FILTER;Color Filter
-!TP_BWMIX_FILTER_BLUE;Blue
-!TP_BWMIX_FILTER_BLUEGREEN;Blue-Green
-!TP_BWMIX_FILTER_GREEN;Green
-!TP_BWMIX_FILTER_GREENYELLOW;Green-Yellow
-!TP_BWMIX_FILTER_NONE;None
-!TP_BWMIX_FILTER_PURPLE;Purple
-!TP_BWMIX_FILTER_RED;Red
-!TP_BWMIX_FILTER_REDYELLOW;Red-Yellow
-!TP_BWMIX_FILTER_TOOLTIP;The color filter simulates shots taken with a colored filter placed in front of the lens. Colored filters reduce the transmission of specific color ranges and therefore affect their lightness. E.g. a red filter darkens blue skies.
-!TP_BWMIX_FILTER_YELLOW;Yellow
-!TP_BWMIX_GAMMA;Gamma Correction
-!TP_BWMIX_GAM_TOOLTIP;Correct gamma for each RGB channel.
-!TP_BWMIX_LABEL;Black-and-White
-!TP_BWMIX_MET;Method
-!TP_BWMIX_MET_CHANMIX;Channel Mixer
-!TP_BWMIX_MET_DESAT;Desaturation
-!TP_BWMIX_MET_LUMEQUAL;Luminance Equalizer
-!TP_BWMIX_MIXC;Channel Mixer
-!TP_BWMIX_NEUTRAL;Reset
-!TP_BWMIX_RGBLABEL;R: %1%% G: %2%% B: %3%% Total: %4%%
-!TP_BWMIX_RGBLABEL_HINT;Final RGB factors that take care of all the mixer options.\n"Total" displays the sum of the RGB values:\n- always 100% in relative mode\n- higher (lighter) or lower (darker) than 100% in absolute mode.
-!TP_BWMIX_RGB_TOOLTIP;Mix the RGB channels. Use presets for guidance.\nPay attention to negative values that may cause artifacts or erratic behavior.
-!TP_BWMIX_SETTING;Presets
-!TP_BWMIX_SETTING_TOOLTIP;Different presets (film, landscape, etc.) or manual Channel Mixer settings.
-!TP_BWMIX_SET_HIGHCONTAST;High contrast
-!TP_BWMIX_SET_HIGHSENSIT;High Sensitivity
-!TP_BWMIX_SET_HYPERPANCHRO;Hyper Panchromatic
-!TP_BWMIX_SET_INFRARED;Infrared
-!TP_BWMIX_SET_LANDSCAPE;Landscape
-!TP_BWMIX_SET_LOWSENSIT;Low Sensitivity
-!TP_BWMIX_SET_LUMINANCE;Luminance
-!TP_BWMIX_SET_NORMCONTAST;Normal Contrast
-!TP_BWMIX_SET_ORTHOCHRO;Orthochromatic
-!TP_BWMIX_SET_PANCHRO;Panchromatic
-!TP_BWMIX_SET_PORTRAIT;Portrait
-!TP_BWMIX_SET_RGBABS;Absolute RGB
-!TP_BWMIX_SET_RGBREL;Relative RGB
-!TP_BWMIX_SET_ROYGCBPMABS;Absolute ROYGCBPM
-!TP_BWMIX_SET_ROYGCBPMREL;Relative ROYGCBPM
-!TP_BWMIX_TCMODE_FILMLIKE;B&W Film-like
-!TP_BWMIX_TCMODE_SATANDVALBLENDING;B&W Saturation and Value Blending
-!TP_BWMIX_TCMODE_STANDARD;B&W Standard
-!TP_BWMIX_TCMODE_WEIGHTEDSTD;B&W Weighted Standard
-!TP_BWMIX_VAL;L
-!TP_CBDL_AFT;After Black-and-White
-!TP_CBDL_BEF;Before Black-and-White
-!TP_CBDL_METHOD;Process located
-!TP_CBDL_METHOD_TOOLTIP;Choose whether the Contrast by Detail Levels tool is to be positioned after the Black-and-White tool, which makes it work in L*a*b* space, or before it, which makes it work in RGB space.
-!TP_CHROMATABERR_LABEL;Chromatic Aberration
-!TP_COLORAPP_ABSOLUTELUMINANCE;Absolute luminance
-!TP_COLORAPP_ALGO;Algorithm
-!TP_COLORAPP_ALGO_ALL;All
-!TP_COLORAPP_ALGO_JC;Lightness + Chroma (JC)
-!TP_COLORAPP_ALGO_JS;Lightness + Saturation (JS)
-!TP_COLORAPP_ALGO_QM;Brightness + Colorfulness (QM)
-!TP_COLORAPP_ALGO_TOOLTIP;Lets you choose between parameter subsets or all parameters.
-!TP_COLORAPP_BADPIXSL;Hot/bad pixel filter
-!TP_COLORAPP_BADPIXSL_TOOLTIP;Suppression of hot/bad (brightly colored) pixels.\n0 = No effect\n1 = Median\n2 = Gaussian.\nAlternatively, adjust the image to avoid very dark shadows.\n\nThese artifacts are due to limitations of CIECAM02.
-!TP_COLORAPP_BRIGHT;Brightness (Q)
-!TP_COLORAPP_BRIGHT_TOOLTIP;Brightness in CIECAM02 takes into account the white's luminosity and differs from L*a*b* and RGB brightness.
-!TP_COLORAPP_CAT02ADAPTATION_TOOLTIP;When setting manually, values above 65 are recommended.
-!TP_COLORAPP_CHROMA;Chroma (C)
-!TP_COLORAPP_CHROMA_M;Colorfulness (M)
-!TP_COLORAPP_CHROMA_M_TOOLTIP;Colorfulness in CIECAM02 differs from L*a*b* and RGB colorfulness.
-!TP_COLORAPP_CHROMA_S;Saturation (S)
-!TP_COLORAPP_CHROMA_S_TOOLTIP;Saturation in CIECAM02 differs from L*a*b* and RGB saturation.
-!TP_COLORAPP_CHROMA_TOOLTIP;Chroma in CIECAM02 differs from L*a*b* and RGB chroma.
-!TP_COLORAPP_CIECAT_DEGREE;CAT02 adaptation
-!TP_COLORAPP_CONTRAST;Contrast (J)
-!TP_COLORAPP_CONTRAST_Q;Contrast (Q)
-!TP_COLORAPP_CONTRAST_Q_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CONTRAST_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CURVEEDITOR1;Tone curve 1
-!TP_COLORAPP_CURVEEDITOR1_TOOLTIP;Shows the histogram of L* (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of J or Q after CIECAM02.\n\nJ and Q are not shown in the main histogram panel.\n\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_CURVEEDITOR2;Tone curve 2
-!TP_COLORAPP_CURVEEDITOR2_TOOLTIP;Same usage as with the second exposure tone curve.
-!TP_COLORAPP_CURVEEDITOR3;Color curve
-!TP_COLORAPP_CURVEEDITOR3_TOOLTIP;Adjust either chroma, saturation or colorfulness.\n\nShows the histogram of chromaticity (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of C, s or M after CIECAM02.\n\nC, s and M are not shown in the main histogram panel.\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_DATACIE;CIECAM02 output histograms in curves
-!TP_COLORAPP_DATACIE_TOOLTIP;When enabled, histograms in CIECAM02 curves show approximate values/ranges for J or Q, and C, s or M after the CIECAM02 adjustments.\nThis selection does not impact the main histogram panel.\n\nWhen disabled, histograms in CIECAM02 curves show L*a*b* values before CIECAM02 adjustments.
-!TP_COLORAPP_FREE;Free temp+green + CAT02 + [output]
-!TP_COLORAPP_GAMUT;Gamut control (L*a*b*)
-!TP_COLORAPP_GAMUT_TOOLTIP;Allow gamut control in L*a*b* mode.
-!TP_COLORAPP_HUE;Hue (h)
-!TP_COLORAPP_HUE_TOOLTIP;Hue (h) - angle between 0° and 360°.
-!TP_COLORAPP_LABEL;CIE Color Appearance Model 2002
-!TP_COLORAPP_LABEL_CAM02;Image Adjustments
-!TP_COLORAPP_LABEL_SCENE;Scene Conditions
-!TP_COLORAPP_LABEL_VIEWING;Viewing Conditions
-!TP_COLORAPP_LIGHT;Lightness (J)
-!TP_COLORAPP_LIGHT_TOOLTIP;Lightness in CIECAM02 differs from L*a*b* and RGB lightness.
-!TP_COLORAPP_MEANLUMINANCE;Mean luminance (Yb%)
-!TP_COLORAPP_MODEL;WP Model
-!TP_COLORAPP_MODEL_TOOLTIP;White-Point Model.\n\nWB [RT] + [output]: RT's white balance is used for the scene, CIECAM02 is set to D50, and the output device's white balance is set in Viewing Conditions.\n\nWB [RT+CAT02] + [output]: RT's white balance settings are used by CAT02 and the output device's white balance is set in Viewing Conditions.\n\nFree temp+green + CAT02 + [output]: temp and green are selected by the user, the output device's white balance is set in Viewing Conditions.
-!TP_COLORAPP_NEUTRAL;Reset
-!TP_COLORAPP_NEUTRAL_TIP;Reset all sliders checkbox and curves to their default values
-!TP_COLORAPP_RSTPRO;Red & skin-tones protection
-!TP_COLORAPP_RSTPRO_TOOLTIP;Red & skin-tones protection affects both sliders and curves.
-!TP_COLORAPP_SURROUND;Surround
-!TP_COLORAPP_SURROUND_AVER;Average
-!TP_COLORAPP_SURROUND_DARK;Dark
-!TP_COLORAPP_SURROUND_DIM;Dim
-!TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
-!TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\nAverage: Average light environment (standard). The image will not change.\n\nDim: Dim environment (TV). The image will become slighty dark.\n\nDark: Dark environment (projector). The image will become more dark.\n\nExtremly Dark: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
-!TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
-!TP_COLORAPP_TCMODE_CHROMA;Chroma
-!TP_COLORAPP_TCMODE_COLORF;Colorfulness
-!TP_COLORAPP_TCMODE_LABEL1;Curve mode 1
-!TP_COLORAPP_TCMODE_LABEL2;Curve mode 2
-!TP_COLORAPP_TCMODE_LABEL3;Curve chroma mode
-!TP_COLORAPP_TCMODE_LIGHTNESS;Lightness
-!TP_COLORAPP_TCMODE_SATUR;Saturation
-!TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD50 temp=5003\nD55 temp=5503\nD65 temp=6504\nD75 temp=7504
-!TP_COLORAPP_TONECIE;Tone mapping using CIECAM02
-!TP_COLORAPP_TONECIE_TOOLTIP;If this option is disabled, tone mapping is done in L*a*b* space.\nIf this option is enabled, tone mapping is done using CIECAM02.\nThe Tone Mapping tool must be enabled for this setting to take effect.
-!TP_COLORAPP_VIEWING_ABSOLUTELUMINANCE_TOOLTIP;Absolute luminance of the viewing environment\n(usually 16 cd/m²).
-!TP_COLORAPP_WBCAM;WB [RT+CAT02] + [output]
-!TP_COLORAPP_WBRT;WB [RT] + [output]
-!TP_COLORTONING_AB;o C/L
-!TP_COLORTONING_AUTOSAT;Automatic
-!TP_COLORTONING_BALANCE;Balance
-!TP_COLORTONING_BY;o C/L
-!TP_COLORTONING_CHROMAC;Opacity
-!TP_COLORTONING_COLOR;Color
-!TP_COLORTONING_CURVEEDITOR_CL_TOOLTIP;Chroma opacity as a function of luminance oC=f(L)
-!TP_COLORTONING_HIGHLIGHT;Highlights
-!TP_COLORTONING_HUE;Hue
-!TP_COLORTONING_LAB;L*a*b* blending
-!TP_COLORTONING_LABEL;Color Toning
-!TP_COLORTONING_LABGRID;L*a*b* color correction grid
-!TP_COLORTONING_LABGRID_VALUES;HL: a=%1 b=%2\nS: a=%3 b=%4
-!TP_COLORTONING_LABREGIONS;Color correction regions
-!TP_COLORTONING_LABREGION_ABVALUES;a=%1 b=%2
-!TP_COLORTONING_LABREGION_CHANNEL;Channel
-!TP_COLORTONING_LABREGION_CHANNEL_ALL;All
-!TP_COLORTONING_LABREGION_CHANNEL_B;Blue
-!TP_COLORTONING_LABREGION_CHANNEL_G;Green
-!TP_COLORTONING_LABREGION_CHANNEL_R;Red
-!TP_COLORTONING_LABREGION_CHROMATICITYMASK;C
-!TP_COLORTONING_LABREGION_HUEMASK;H
-!TP_COLORTONING_LABREGION_LIGHTNESS;Lightness
-!TP_COLORTONING_LABREGION_LIGHTNESSMASK;L
-!TP_COLORTONING_LABREGION_LIST_TITLE;Correction
-!TP_COLORTONING_LABREGION_MASK;Mask
-!TP_COLORTONING_LABREGION_MASKBLUR;Mask Blur
-!TP_COLORTONING_LABREGION_OFFSET;Offset
-!TP_COLORTONING_LABREGION_POWER;Power
-!TP_COLORTONING_LABREGION_SATURATION;Saturation
-!TP_COLORTONING_LABREGION_SHOWMASK;Show mask
-!TP_COLORTONING_LABREGION_SLOPE;Slope
-!TP_COLORTONING_LUMA;Luminance
-!TP_COLORTONING_LUMAMODE;Preserve luminance
-!TP_COLORTONING_LUMAMODE_TOOLTIP;If enabled, when you change color (red, green, cyan, blue, etc.) the luminance of each pixel is preserved.
-!TP_COLORTONING_METHOD;Method
-!TP_COLORTONING_METHOD_TOOLTIP;"L*a*b* blending", "RGB sliders" and "RGB curves" use interpolated color blending.\n"Color balance (Shadows/Midtones/Highlights)" and "Saturation 2 colors" use direct colors.\n\nThe Black-and-White tool can be enabled when using any color toning method, which allows for color toning.
-!TP_COLORTONING_MIDTONES;Midtones
-!TP_COLORTONING_NEUTRAL;Reset sliders
-!TP_COLORTONING_NEUTRAL_TIP;Reset all values (Shadows, Midtones, Highlights) to default.
-!TP_COLORTONING_OPACITY;Opacity
-!TP_COLORTONING_RGBCURVES;RGB - Curves
-!TP_COLORTONING_RGBSLIDERS;RGB - Sliders
-!TP_COLORTONING_SA;Saturation Protection
-!TP_COLORTONING_SATURATEDOPACITY;Strength
-!TP_COLORTONING_SATURATIONTHRESHOLD;Threshold
-!TP_COLORTONING_SHADOWS;Shadows
-!TP_COLORTONING_SPLITCO;Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITCOCO;Color Balance Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITLR;Saturation 2 colors
-!TP_COLORTONING_STR;Strength
-!TP_COLORTONING_STRENGTH;Strength
-!TP_COLORTONING_TWO2;Special chroma '2 colors'
-!TP_COLORTONING_TWOALL;Special chroma
-!TP_COLORTONING_TWOBY;Special a* and b*
-!TP_COLORTONING_TWOCOLOR_TOOLTIP;Standard chroma:\nLinear response, a* = b*.\n\nSpecial chroma:\nLinear response, a* = b*, but unbound - try under the diagonal.\n\nSpecial a* and b*:\nLinear response unbound with separate curves for a* and b*. Intended for special effects.\n\nSpecial chroma 2 colors:\nMore predictable.
-!TP_COLORTONING_TWOSTD;Standard chroma
-!TP_CROP_GTEPASSPORT;Biometric Passport
-!TP_CROP_GTFRAME;Frame
-!TP_CROP_GTGRID;Grid
-!TP_CROP_GTHARMMEANS;Harmonic Means
-!TP_CROP_GTTRIANGLE1;Golden Triangles 1
-!TP_CROP_GTTRIANGLE2;Golden Triangles 2
-!TP_CROP_PPI;PPI
-!TP_CROP_RESETCROP;Reset
-!TP_CROP_SELECTCROP;Select
-!TP_DARKFRAME_AUTOSELECT;Auto-selection
-!TP_DARKFRAME_LABEL;Dark-Frame
-!TP_DEFRINGE_LABEL;Defringe
-!TP_DEFRINGE_RADIUS;Radius
-!TP_DEFRINGE_THRESHOLD;Threshold
-!TP_DEHAZE_DEPTH;Depth
-!TP_DEHAZE_LABEL;Haze Removal
-!TP_DEHAZE_SHOW_DEPTH_MAP;Show depth map
-!TP_DEHAZE_STRENGTH;Strength
-!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
-!TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
-!TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominance
-!TP_DIRPYRDENOISE_CHROMINANCE_MANUAL;Manual
-!TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Chrominance - Master
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD;Method
-!TP_DIRPYRDENOISE_CHROMINANCE_METHODADVANCED_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nAutomatic multi-zones\nNo preview - works only during saving, but using the "Preview" method by matching the tile size and center to the preview size and center you can get an idea of the expected results.\nThe image is divided into tiles (about 10 to 70 depending on image size) and each tile receives its own chrominance noise reduction settings.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_PMZ;Preview multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW;Preview
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEWRESIDUAL_INFO_TOOLTIP;Displays the remaining noise levels of the part of the image visible in the preview after wavelet.\n\n>300 Very noisy\n100-300 Noisy\n50-100 A little noisy\n<50 Very low noise\n\nBeware, the values will differ between RGB and L*a*b* mode. The RGB values are less accurate because the RGB mode does not completely separate luminance and chrominance.
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_INFO;Preview size=%1, Center: Px=%2 Py=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Preview noise: Mean=%1 High=%2
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= - High= -
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2 Ty=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
-!TP_DIRPYRDENOISE_LABEL;Noise Reduction
-!TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
-!TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
-!TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Detail recovery
-!TP_DIRPYRDENOISE_LUMINANCE_FRAME;Luminance
-!TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminance
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE;Color space
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;For raw images either RGB or L*a*b* methods can be used.\n\nFor non-raw images the L*a*b* method will be used, regardless of the selection.
-!TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
-!TP_DIRPYRDENOISE_MAIN_GAMMA_TOOLTIP;Gamma varies noise reduction strength across the range of tones. Smaller values will target shadows, while larger values will stretch the effect to the brighter tones.
-!TP_DIRPYRDENOISE_MAIN_MODE;Mode
-!TP_DIRPYRDENOISE_MAIN_MODE_AGGRESSIVE;Aggressive
-!TP_DIRPYRDENOISE_MAIN_MODE_CONSERVATIVE;Conservative
-!TP_DIRPYRDENOISE_MAIN_MODE_TOOLTIP;"Conservative" preserves low frequency chroma patterns, while "aggressive" obliterates them.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD;Median method
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_CHROMINANCE;Chroma only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LABEL;Median Filter
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LUMINANCE;Luminance only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_RGB;RGB
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_TOOLTIP;When using the "Luminance only" and "L*a*b*" methods, median filtering will be performed just after the wavelet step in the noise reduction pipeline.\nWhen using the "RGB" mode, it will be performed at the very end of the noise reduction pipeline.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_WEIGHTED;Weighted L* (little) + a*b* (normal)
-!TP_DIRPYRDENOISE_MEDIAN_PASSES;Median iterations
-!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
-!TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
-!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
-!TP_DIRPYRDENOISE_TYPE_3X3;3×3
-!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
-!TP_DIRPYRDENOISE_TYPE_5X5;5×5
-!TP_DIRPYRDENOISE_TYPE_5X5SOFT;5×5 soft
-!TP_DIRPYRDENOISE_TYPE_7X7;7×7
-!TP_DIRPYRDENOISE_TYPE_9X9;9×9
-!TP_DIRPYREQUALIZER_ALGO;Skin Color Range
-!TP_DIRPYREQUALIZER_ALGO_TOOLTIP;Fine: closer to the colors of the skin, minimizing the action on other colors\nLarge: avoid more artifacts.
-!TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts
-!TP_DIRPYREQUALIZER_HUESKIN;Skin hue
-!TP_DIRPYREQUALIZER_HUESKIN_TOOLTIP;This pyramid is for the upper part, so far as the algorithm at its maximum efficiency.\nTo the lower part, the transition zones.\nIf you need to move the area significantly to the left or right - or if there are artifacts: the white balance is incorrect\nYou can slightly reduce the zone to prevent the rest of the image is affected.
-!TP_DIRPYREQUALIZER_LABEL;Contrast by Detail Levels
-!TP_DIRPYREQUALIZER_LUMACOARSEST;Coarsest
-!TP_DIRPYREQUALIZER_LUMACONTRAST_MINUS;Contrast -
-!TP_DIRPYREQUALIZER_LUMACONTRAST_PLUS;Contrast +
-!TP_DIRPYREQUALIZER_LUMAFINEST;Finest
-!TP_DIRPYREQUALIZER_LUMANEUTRAL;Neutral
-!TP_DIRPYREQUALIZER_SKIN;Skin targetting/protection
-!TP_DIRPYREQUALIZER_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_DIRPYREQUALIZER_THRESHOLD;Threshold
-!TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image.
-!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
-!TP_EPD_EDGESTOPPING;Edge stopping
-!TP_EPD_GAMMA;Gamma
-!TP_EPD_LABEL;Tone Mapping
-!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
-!TP_EPD_SCALE;Scale
-!TP_EPD_STRENGTH;Strength
-!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
-!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
-!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
-!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
-!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
-!TP_EXPOSURE_CURVEEDITOR2;Tone curve 2
-!TP_EXPOSURE_CURVEEDITOR2_TOOLTIP;Please refer to the "Exposure > Tone Curves" RawPedia article to learn how to achieve the best results by using two tone curves.
-!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
-!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
-!TP_EXPOSURE_SATURATION;Saturation
-!TP_EXPOSURE_TCMODE_FILMLIKE;Film-like
-!TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1
-!TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2
-!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
-!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual
-!TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending
-!TP_EXPOSURE_TCMODE_STANDARD;Standard
-!TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard
-!TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points
-!TP_EXPOS_WHITEPOINT_LABEL;Raw White Points
-!TP_FILMSIMULATION_LABEL;Film Simulation
-!TP_FILMSIMULATION_SLOWPARSEDIR;RawTherapee is configured to look for Hald CLUT images, which are used for the Film Simulation tool, in a folder which is taking too long to load.\nGo to Preferences > Image Processing > Film Simulation\nto see which folder is being used. You should either point RawTherapee to a folder which contains only Hald CLUT images and nothing more, or to an empty folder if you don't want to use the Film Simulation tool.\n\nRead the Film Simulation article in RawPedia for more information.\n\nDo you want to cancel the scan now?
-!TP_FILMSIMULATION_STRENGTH;Strength
-!TP_FILMSIMULATION_ZEROCLUTSFOUND;Set HaldCLUT directory in Preferences
-!TP_FLATFIELD_AUTOSELECT;Auto-selection
-!TP_FLATFIELD_BLURRADIUS;Blur radius
-!TP_FLATFIELD_BLURTYPE;Blur type
-!TP_FLATFIELD_BT_AREA;Area
-!TP_FLATFIELD_BT_HORIZONTAL;Horizontal
-!TP_FLATFIELD_BT_VERTHORIZ;Vertical + Horizontal
-!TP_FLATFIELD_BT_VERTICAL;Vertical
-!TP_FLATFIELD_CLIPCONTROL;Clip control
-!TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Clip control avoids clipped highlights caused by applying the flat field. If there are already clipped highlights before applying the flat field, clip control can lead to color cast.
-!TP_FLATFIELD_LABEL;Flat-Field
-!TP_GENERAL_11SCALE_TOOLTIP;The effects of this tool are only visible or only accurate at a preview scale of 1:1.
-!TP_GRADIENT_CENTER;Center
-!TP_GRADIENT_CENTER_X;Center X
-!TP_GRADIENT_CENTER_X_TOOLTIP;Shift gradient to the left (negative values) or right (positive values).
-!TP_GRADIENT_CENTER_Y;Center Y
-!TP_GRADIENT_CENTER_Y_TOOLTIP;Shift gradient up (negative values) or down (positive values).
-!TP_GRADIENT_DEGREE;Angle
-!TP_GRADIENT_DEGREE_TOOLTIP;Rotation angle in degrees.
-!TP_GRADIENT_FEATHER;Feather
-!TP_GRADIENT_FEATHER_TOOLTIP;Gradient width in percent of the image diagonal.
-!TP_GRADIENT_LABEL;Graduated Filter
-!TP_GRADIENT_STRENGTH;Strength
-!TP_GRADIENT_STRENGTH_TOOLTIP;Filter strength in stops.
-!TP_HLREC_BLEND;Blend
-!TP_HLREC_ENA_TOOLTIP;Could be activated by Auto Levels.
-!TP_HSVEQUALIZER_CHANNEL;Channel
-!TP_HSVEQUALIZER_HUE;H
-!TP_HSVEQUALIZER_LABEL;HSV Equalizer
-!TP_HSVEQUALIZER_SAT;S
-!TP_HSVEQUALIZER_VAL;V
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Baseline exposure
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET_TOOLTIP;Employ the embedded DCP baseline exposure offset. The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYHUESATMAP;Base table
-!TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYLOOKTABLE;Look table
-!TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-!TP_ICM_BLENDCMSMATRIX;Blend ICC highlights with matrix
-!TP_ICM_BLENDCMSMATRIX_TOOLTIP;Enable to recover clipped highlights when using LUT-based ICC profiles.
-!TP_ICM_BPC;Black Point Compensation
-!TP_ICM_DCPILLUMINANT;Illuminant
-!TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
-!TP_ICM_DCPILLUMINANT_TOOLTIP;Select which embedded DCP illuminant to employ. Default is "interpolated" which is a mix between the two based on white balance. The setting is only available if a dual-illuminant DCP with interpolation support is selected.
-!TP_ICM_INPUTCAMERAICC;Auto-matched camera profile
-!TP_ICM_INPUTCAMERAICC_TOOLTIP;Use RawTherapee's camera-specific DCP or ICC input color profiles. These profiles are more precise than simpler matrix ones. They are not available for all cameras. These profiles are stored in the /iccprofiles/input and /dcpprofiles folders and are automatically retrieved based on a file name matching to the exact model name of the camera.
-!TP_ICM_INPUTCAMERA_TOOLTIP;Use a simple color matrix from dcraw, an enhanced RawTherapee version (whichever is available based on camera model) or one embedded in the DNG.
-!TP_ICM_INPUTCUSTOM_TOOLTIP;Select your own DCP/ICC color profile file for the camera.
-!TP_ICM_INPUTEMBEDDED_TOOLTIP;Use color profile embedded in non-raw files.
-!TP_ICM_INPUTNONE;No profile
-!TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases.
-!TP_ICM_PROFILEINTENT;Rendering Intent
-!TP_ICM_SAVEREFERENCE;Save Reference Image
-!TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance
-!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles.
-!TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile.
-!TP_ICM_TONECURVE;Tone curve
-!TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only available if the selected DCP has a tone curve.
-!TP_ICM_WORKING_TRC;Tone response curve:
-!TP_ICM_WORKING_TRC_CUSTOM;Custom
-!TP_ICM_WORKING_TRC_GAMMA;Gamma
-!TP_ICM_WORKING_TRC_NONE;None
-!TP_ICM_WORKING_TRC_SLOPE;Slope
-!TP_ICM_WORKING_TRC_TOOLTIP;Only for built-in profiles.
-!TP_IMPULSEDENOISE_LABEL;Impulse Noise Reduction
-!TP_IMPULSEDENOISE_THRESH;Threshold
-!TP_LABCURVE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_LABCURVE_AVOIDCOLORSHIFT_TOOLTIP;Fit colors into gamut of the working color space and apply Munsell correction.
-!TP_LABCURVE_BRIGHTNESS;Lightness
-!TP_LABCURVE_CHROMATICITY;Chromaticity
-!TP_LABCURVE_CHROMA_TOOLTIP;To apply B&W toning, set Chromaticity to -100.
-!TP_LABCURVE_CONTRAST;Contrast
-!TP_LABCURVE_CURVEEDITOR;Luminance Curve
-!TP_LABCURVE_CURVEEDITOR_A_RANGE1;Green Saturated
-!TP_LABCURVE_CURVEEDITOR_A_RANGE2;Green Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE3;Red Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE4;Red Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE1;Blue Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE2;Blue Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE3;Yellow Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE4;Yellow Saturated
-!TP_LABCURVE_CURVEEDITOR_CC;CC
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE1;Neutral
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE2;Dull
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE3;Pastel
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE4;Saturated
-!TP_LABCURVE_CURVEEDITOR_CC_TOOLTIP;Chromaticity according to chromaticity C=f(C)
-!TP_LABCURVE_CURVEEDITOR_CH;CH
-!TP_LABCURVE_CURVEEDITOR_CH_TOOLTIP;Chromaticity according to hue C=f(H)
-!TP_LABCURVE_CURVEEDITOR_CL;CL
-!TP_LABCURVE_CURVEEDITOR_CL_TOOLTIP;Chromaticity according to luminance C=f(L)
-!TP_LABCURVE_CURVEEDITOR_HH;HH
-!TP_LABCURVE_CURVEEDITOR_HH_TOOLTIP;Hue according to hue H=f(H)
-!TP_LABCURVE_CURVEEDITOR_LC;LC
-!TP_LABCURVE_CURVEEDITOR_LC_TOOLTIP;Luminance according to chromaticity L=f(C)
-!TP_LABCURVE_CURVEEDITOR_LH;LH
-!TP_LABCURVE_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H)
-!TP_LABCURVE_CURVEEDITOR_LL_TOOLTIP;Luminance according to luminance L=f(L)
-!TP_LABCURVE_LABEL;L*a*b* Adjustments
-!TP_LABCURVE_LCREDSK;Restrict LC to red and skin-tones
-!TP_LABCURVE_LCREDSK_TIP;If enabled, the LC Curve affects only red and skin-tones.\nIf disabled, it applies to all tones.
-!TP_LABCURVE_RSTPROTECTION;Red and skin-tones protection
-!TP_LABCURVE_RSTPRO_TOOLTIP;Works on the Chromaticity slider and the CC curve.
-!TP_LENSGEOM_AUTOCROP;Auto-Crop
-!TP_LENSGEOM_FILL;Auto-fill
-!TP_LENSGEOM_LABEL;Lens / Geometry
-!TP_LENSPROFILE_CORRECTION_AUTOMATCH;Automatically selected
-!TP_LENSPROFILE_CORRECTION_LCPFILE;LCP file
-!TP_LENSPROFILE_CORRECTION_MANUAL;Manually selected
-!TP_LENSPROFILE_LABEL;Profiled Lens Correction
-!TP_LENSPROFILE_LENS_WARNING;Warning: the crop factor used for lens profiling is larger than the crop factor of the camera, the results might be wrong.
-!TP_LENSPROFILE_MODE_HEADER;Lens Profile
-!TP_LENSPROFILE_USE_CA;Chromatic aberration
-!TP_LENSPROFILE_USE_GEOMETRIC;Geometric distortion
-!TP_LENSPROFILE_USE_HEADER;Correct
-!TP_LENSPROFILE_USE_VIGNETTING;Vignetting
-!TP_LOCALCONTRAST_AMOUNT;Amount
-!TP_LOCALCONTRAST_DARKNESS;Darkness level
-!TP_LOCALCONTRAST_LABEL;Local Contrast
-!TP_LOCALCONTRAST_LIGHTNESS;Lightness level
-!TP_LOCALCONTRAST_RADIUS;Radius
-!TP_METADATA_EDIT;Apply modifications
-!TP_METADATA_MODE;Metadata copy mode
-!TP_METADATA_STRIP;Strip all metadata
-!TP_METADATA_TUNNEL;Copy unchanged
-!TP_NEUTRAL;Reset
-!TP_NEUTRAL_TIP;Resets exposure sliders to neutral values.\nApplies to the same controls that Auto Levels applies to, regardless of whether you used Auto Levels or not.
-!TP_PCVIGNETTE_FEATHER;Feather
-!TP_PCVIGNETTE_FEATHER_TOOLTIP;Feathering:\n0 = corners only,\n50 = halfway to center,\n100 = to center.
-!TP_PCVIGNETTE_LABEL;Vignette Filter
-!TP_PCVIGNETTE_ROUNDNESS;Roundness
-!TP_PCVIGNETTE_ROUNDNESS_TOOLTIP;Roundness:\n0 = rectangle,\n50 = fitted ellipse,\n100 = circle.
-!TP_PCVIGNETTE_STRENGTH;Strength
-!TP_PCVIGNETTE_STRENGTH_TOOLTIP;Filter strength in stops (reached in corners).
-!TP_PERSPECTIVE_HORIZONTAL;Horizontal
-!TP_PERSPECTIVE_LABEL;Perspective
-!TP_PERSPECTIVE_VERTICAL;Vertical
-!TP_PFCURVE_CURVEEDITOR_CH;Hue
-!TP_PFCURVE_CURVEEDITOR_CH_TOOLTIP;Controls defringe strength by color.\nHigher = more,\nLower = less.
-!TP_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!TP_PREPROCESS_DEADPIXFILT_TOOLTIP;Tries to suppress dead pixels.
-!TP_PREPROCESS_GREENEQUIL;Green equilibration
-!TP_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!TP_PREPROCESS_HOTPIXFILT_TOOLTIP;Tries to suppress hot pixels.
-!TP_PREPROCESS_LABEL;Preprocessing
-!TP_PREPROCESS_LINEDENOISE;Line noise filter
-!TP_PREPROCESS_LINEDENOISE_DIRECTION;Direction
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_BOTH;Both
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_HORIZONTAL;Horizontal
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_PDAF_LINES;Horizontal only on PDAF rows
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_VERTICAL;Vertical
-!TP_PREPROCESS_NO_FOUND;None found
-!TP_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!TP_PRSHARPENING_LABEL;Post-Resize Sharpening
-!TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions.
-!TP_RAWCACORR_AUTO;Auto-correction
-!TP_RAWCACORR_AUTOIT;Iterations
-!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
-!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CABLUE;Blue
-!TP_RAWCACORR_CARED;Red
-!TP_RAWCACORR_CASTR;Strength
-!TP_RAWEXPOS_BLACKS;Black Levels
-!TP_RAWEXPOS_BLACK_0;Green 1 (lead)
-!TP_RAWEXPOS_BLACK_1;Red
-!TP_RAWEXPOS_BLACK_2;Blue
-!TP_RAWEXPOS_BLACK_3;Green 2
-!TP_RAWEXPOS_BLACK_BLUE;Blue
-!TP_RAWEXPOS_BLACK_GREEN;Green
-!TP_RAWEXPOS_BLACK_RED;Red
-!TP_RAWEXPOS_LINEAR;White-point correction
-!TP_RAWEXPOS_RGB;Red, Green, Blue
-!TP_RAWEXPOS_TWOGREEN;Link greens
-!TP_RAW_1PASSMEDIUM;1-pass (Markesteijn)
-!TP_RAW_2PASS;1-pass+fast
-!TP_RAW_3PASSBEST;3-pass (Markesteijn)
-!TP_RAW_4PASS;3-pass+fast
-!TP_RAW_AHD;AHD
-!TP_RAW_AMAZE;AMaZE
-!TP_RAW_AMAZEVNG4;AMaZE+VNG4
-!TP_RAW_BORDER;Border
-!TP_RAW_DCB;DCB
-!TP_RAW_DCBENHANCE;DCB enhancement
-!TP_RAW_DCBITERATIONS;Number of DCB iterations
-!TP_RAW_DCBVNG4;DCB+VNG4
-!TP_RAW_DMETHOD_PROGRESSBAR;%1 demosaicing...
-!TP_RAW_DMETHOD_PROGRESSBAR_REFINE;Demosaicing refinement...
-!TP_RAW_DMETHOD_TOOLTIP;Note: IGV and LMMSE are dedicated to high ISO images to aid in noise reduction without leading to maze patterns, posterization or a washed-out look.\nPixel Shift is for Pentax/Sony Pixel Shift files. It falls back to AMaZE for non-Pixel Shift files.
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST;Auto threshold
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST_TOOLTIP;If the checkbox is checked (recommended), RawTherapee calculates an optimum value based on flat regions in the image.\nIf there is no flat region in the image or the image is too noisy, the value will be set to 0.\nTo set the value manually, uncheck the checkbox first (reasonable values depend on the image).
-!TP_RAW_DUALDEMOSAICCONTRAST;Contrast threshold
-!TP_RAW_EAHD;EAHD
-!TP_RAW_FAST;Fast
-!TP_RAW_HD;Threshold
-!TP_RAW_HD_TOOLTIP;Lower values make hot/dead pixel detection more aggressive, but false positives may lead to artifacts. If you notice any artifacts appearing when enabling the Hot/Dead Pixel Filters, gradually increase the threshold value until they disappear.
-!TP_RAW_HPHD;HPHD
-!TP_RAW_IGV;IGV
-!TP_RAW_IMAGENUM;Sub-image
-!TP_RAW_IMAGENUM_SN;SN mode
-!TP_RAW_IMAGENUM_TOOLTIP;Some raw files consist of several sub-images (Pentax/Sony Pixel Shift, Pentax 3-in-1 HDR, Canon Dual Pixel, Fuji EXR).\n\nWhen using any demosaicing method other than Pixel Shift, this selects which sub-image is used.\n\nWhen using the Pixel Shift demosaicing method on a Pixel Shift raw, all sub-images are used, and this selects which sub-image should be used for moving parts.
-!TP_RAW_LABEL;Demosaicing
-!TP_RAW_LMMSE;LMMSE
-!TP_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!TP_RAW_LMMSE_TOOLTIP;Adds gamma (step 1), median (steps 2-4) and refinement (steps 5-6) to reduce artifacts and improve the signal-to-noise ratio.
-!TP_RAW_MONO;Mono
-!TP_RAW_NONE;None (Shows sensor pattern)
-!TP_RAW_PIXELSHIFT;Pixel Shift
-!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
-!TP_RAW_PIXELSHIFTDMETHOD;Demosaic method for motion
-!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
-!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
-!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
-!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
-!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
-!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
-!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
-!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
-!TP_RAW_PIXELSHIFTMM_OFF;Off
-!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
-!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
-!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
-!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
-!TP_RAW_PIXELSHIFTSIGMA;Blur radius
-!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
-!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
-!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
-!TP_RAW_RCD;RCD
-!TP_RAW_RCDVNG4;RCD+VNG4
-!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
-!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.\n+fast gives less artifacts in flat areas
-!TP_RAW_SENSOR_XTRANS_LABEL;Sensor with X-Trans Matrix
-!TP_RAW_VNG4;VNG4
-!TP_RAW_XTRANS;X-Trans
-!TP_RAW_XTRANSFAST;Fast X-Trans
-!TP_RESIZE_ALLOW_UPSCALING;Allow Upscaling
-!TP_RESIZE_APPLIESTO;Applies to:
-!TP_RESIZE_CROPPEDAREA;Cropped Area
-!TP_RESIZE_FITBOX;Bounding Box
-!TP_RESIZE_FULLIMAGE;Full Image
-!TP_RESIZE_HEIGHT;Height
-!TP_RESIZE_LANCZOS;Lanczos
-!TP_RESIZE_SPECIFY;Specify:
-!TP_RESIZE_WIDTH;Width
-!TP_RETINEX_CONTEDIT_HSL;HSL histogram
-!TP_RETINEX_CONTEDIT_LAB;L*a*b* histogram
-!TP_RETINEX_CONTEDIT_LH;Hue
-!TP_RETINEX_CONTEDIT_MAP;Equalizer
-!TP_RETINEX_CURVEEDITOR_CD;L=f(L)
-!TP_RETINEX_CURVEEDITOR_CD_TOOLTIP;Luminance according to luminance L=f(L)\nCorrect raw data to reduce halos and artifacts.
-!TP_RETINEX_CURVEEDITOR_LH;Strength=f(H)
-!TP_RETINEX_CURVEEDITOR_LH_TOOLTIP;Strength according to hue Strength=f(H)\nThis curve also acts on chroma when using the "Highlight" retinex method.
-!TP_RETINEX_CURVEEDITOR_MAP;L=f(L)
-!TP_RETINEX_CURVEEDITOR_MAP_TOOLTIP;This curve can be applied alone or with a Gaussian mask or wavelet mask.\nBeware of artifacts!
-!TP_RETINEX_EQUAL;Equalizer
-!TP_RETINEX_FREEGAMMA;Free gamma
-!TP_RETINEX_GAIN;Gain
-!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
-!TP_RETINEX_GAINTRANSMISSION;Gain transmission
-!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
-!TP_RETINEX_GAMMA;Gamma
-!TP_RETINEX_GAMMA_FREE;Free
-!TP_RETINEX_GAMMA_HIGH;High
-!TP_RETINEX_GAMMA_LOW;Low
-!TP_RETINEX_GAMMA_MID;Middle
-!TP_RETINEX_GAMMA_NONE;None
-!TP_RETINEX_GAMMA_TOOLTIP;Restore tones by applying gamma before and after Retinex. Different from Retinex curves or others curves (Lab, Exposure, etc.).
-!TP_RETINEX_GRAD;Transmission gradient
-!TP_RETINEX_GRADS;Strength gradient
-!TP_RETINEX_GRADS_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Strength is reduced when iterations increase, and conversely.
-!TP_RETINEX_GRAD_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Variance and Threshold are reduced when iterations increase, and conversely.
-!TP_RETINEX_HIGH;High
-!TP_RETINEX_HIGHLIG;Highlight
-!TP_RETINEX_HIGHLIGHT;Highlight threshold
-!TP_RETINEX_HIGHLIGHT_TOOLTIP;Increase action of High algorithm.\nMay require you to re-adjust "Neighboring pixels" and to increase the "White-point correction" in the Raw tab -> Raw White Points tool.
-!TP_RETINEX_HSLSPACE_LIN;HSL-Linear
-!TP_RETINEX_HSLSPACE_LOG;HSL-Logarithmic
-!TP_RETINEX_ITER;Iterations (Tone-mapping)
-!TP_RETINEX_ITERF;Tone mapping
-!TP_RETINEX_ITER_TOOLTIP;Simulate a tone-mapping operator.\nHigh values increase the processing time.
-!TP_RETINEX_LABEL;Retinex
-!TP_RETINEX_LABEL_MASK;Mask
-!TP_RETINEX_LABSPACE;L*a*b*
-!TP_RETINEX_LOW;Low
-!TP_RETINEX_MAP;Method
-!TP_RETINEX_MAP_GAUS;Gaussian mask
-!TP_RETINEX_MAP_MAPP;Sharp mask (wavelet partial)
-!TP_RETINEX_MAP_MAPT;Sharp mask (wavelet total)
-!TP_RETINEX_MAP_METHOD_TOOLTIP;Use the mask generated by the Gaussian function above (Radius, Method) to reduce halos and artifacts.\n\nCurve only: apply a diagonal contrast curve on the mask.\nBeware of artifacts!\n\nGaussian mask: generate and use a Gaussian blur of the original mask.\nQuick.\n\nSharp mask: generate and use a wavelet on the original mask.\nSlow.
-!TP_RETINEX_MAP_NONE;None
-!TP_RETINEX_MEDIAN;Transmission median filter
-!TP_RETINEX_METHOD;Method
-!TP_RETINEX_METHOD_TOOLTIP;Low = Reinforce low light.\nUniform = Equalize action.\nHigh = Reinforce high light.\nHighlights = Remove magenta in highlights.
-!TP_RETINEX_MLABEL;Restored haze-free Min=%1 Max=%2
-!TP_RETINEX_MLABEL_TOOLTIP;Should be near min=0 max=32768\nRestored image with no mixture.
-!TP_RETINEX_NEIGHBOR;Radius
-!TP_RETINEX_NEUTRAL;Reset
-!TP_RETINEX_NEUTRAL_TIP;Reset all sliders and curves to their default values.
-!TP_RETINEX_OFFSET;Offset (brightness)
-!TP_RETINEX_SCALES;Gaussian gradient
-!TP_RETINEX_SCALES_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Scale and radius are reduced when iterations increase, and conversely.
-!TP_RETINEX_SETTINGS;Settings
-!TP_RETINEX_SKAL;Scale
-!TP_RETINEX_SLOPE;Free gamma slope
-!TP_RETINEX_STRENGTH;Strength
-!TP_RETINEX_THRESHOLD;Threshold
-!TP_RETINEX_THRESHOLD_TOOLTIP;Limits in/out.\nIn = image source,\nOut = image gauss.
-!TP_RETINEX_TLABEL;TM Min=%1 Max=%2 Mean=%3 Sigma=%4
-!TP_RETINEX_TLABEL2;TM Tm=%1 TM=%2
-!TP_RETINEX_TLABEL_TOOLTIP;Transmission map result.\nMin and Max are used by Variance.\nMean and Sigma.\nTm=Min TM=Max of transmission map.
-!TP_RETINEX_TRANF;Transmission
-!TP_RETINEX_TRANSMISSION;Transmission map
-!TP_RETINEX_TRANSMISSION_TOOLTIP;Transmission according to transmission.\nAbscissa: transmission from negative values (min), mean, and positives values (max).\nOrdinate: amplification or reduction.
-!TP_RETINEX_UNIFORM;Uniform
-!TP_RETINEX_VARIANCE;Contrast
-!TP_RETINEX_VARIANCE_TOOLTIP;Low variance increase local contrast and saturation, but can lead to artifacts.
-!TP_RETINEX_VIEW;Process
-!TP_RETINEX_VIEW_MASK;Mask
-!TP_RETINEX_VIEW_METHOD_TOOLTIP;Standard - Normal display.\nMask - Displays the mask.\nUnsharp mask - Displays the image with a high radius unsharp mask.\nTransmission - Auto/Fixed - Displays the file transmission-map, before any action on contrast and brightness.\n\nAttention: the mask does not correspond to reality, but is amplified to make it more visible.
-!TP_RETINEX_VIEW_NONE;Standard
-!TP_RETINEX_VIEW_TRAN;Transmission - Auto
-!TP_RETINEX_VIEW_TRAN2;Transmission - Fixed
-!TP_RETINEX_VIEW_UNSHARP;Unsharp mask
-!TP_RGBCURVES_BLUE;B
-!TP_RGBCURVES_CHANNEL;Channel
-!TP_RGBCURVES_GREEN;G
-!TP_RGBCURVES_LABEL;RGB Curves
-!TP_RGBCURVES_LUMAMODE;Luminosity mode
-!TP_RGBCURVES_LUMAMODE_TOOLTIP;Luminosity mode allows to vary the contribution of R, G and B channels to the luminosity of the image, without altering image color.
-!TP_RGBCURVES_RED;R
-!TP_SAVEDIALOG_OK_TIP;Shortcut: Ctrl-Enter
-!TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
-!TP_SHARPENEDGE_AMOUNT;Quantity
-!TP_SHARPENEDGE_LABEL;Edges
-!TP_SHARPENEDGE_PASSES;Iterations
-!TP_SHARPENEDGE_THREE;Luminance only
-!TP_SHARPENING_BLUR;Blur radius
-!TP_SHARPENING_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_AMOUNT;Quantity
-!TP_SHARPENMICRO_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_LABEL;Microcontrast
-!TP_SHARPENMICRO_MATRIX;3×3 matrix instead of 5×5
-!TP_SHARPENMICRO_UNIFORMITY;Uniformity
-!TP_SOFTLIGHT_LABEL;Soft Light
-!TP_SOFTLIGHT_STRENGTH;Strength
-!TP_TM_FATTAL_AMOUNT;Amount
-!TP_TM_FATTAL_ANCHOR;Anchor
-!TP_TM_FATTAL_LABEL;Dynamic Range Compression
-!TP_TM_FATTAL_THRESHOLD;Detail
-!TP_VIBRANCE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES;HH
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_LABEL;Skin-tones
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE1;Red/Purple
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE2;Red
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE3;Red/Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE4;Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_TOOLTIP;Hue according to hue H=f(H)
-!TP_VIBRANCE_LABEL;Vibrance
-!TP_VIBRANCE_PASTELS;Pastel Tones
-!TP_VIBRANCE_PASTSATTOG;Link pastel and saturated tones
-!TP_VIBRANCE_PROTECTSKINS;Protect skin-tones
-!TP_VIBRANCE_PSTHRESHOLD;Pastel/saturated tones threshold
-!TP_VIBRANCE_PSTHRESHOLD_SATTHRESH;Saturation threshold
-!TP_VIBRANCE_PSTHRESHOLD_TOOLTIP;The vertical axis represents pastel tones at the bottom and saturated tones at the top.\nThe horizontal axis represents the saturation range.
-!TP_VIBRANCE_PSTHRESHOLD_WEIGTHING;Pastel/saturated transition's weighting
-!TP_VIBRANCE_SATURATED;Saturated Tones
-!TP_VIGNETTING_CENTER;Center
-!TP_VIGNETTING_CENTER_X;Center X
-!TP_VIGNETTING_CENTER_Y;Center Y
-!TP_VIGNETTING_STRENGTH;Strength
-!TP_WAVELET_1;Level 1
-!TP_WAVELET_2;Level 2
-!TP_WAVELET_3;Level 3
-!TP_WAVELET_4;Level 4
-!TP_WAVELET_5;Level 5
-!TP_WAVELET_6;Level 6
-!TP_WAVELET_7;Level 7
-!TP_WAVELET_8;Level 8
-!TP_WAVELET_9;Level 9
-!TP_WAVELET_APPLYTO;Apply To
-!TP_WAVELET_AVOID;Avoid color shift
-!TP_WAVELET_B0;Black
-!TP_WAVELET_B1;Grey
-!TP_WAVELET_B2;Residual
-!TP_WAVELET_BACKGROUND;Background
-!TP_WAVELET_BACUR;Curve
-!TP_WAVELET_BALANCE;Contrast balance d/v-h
-!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified.
-!TP_WAVELET_BALCHRO;Chroma balance
-!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance.
-!TP_WAVELET_BANONE;None
-!TP_WAVELET_BASLI;Slider
-!TP_WAVELET_BATYPE;Contrast balance method
-!TP_WAVELET_CBENAB;Toning and Color Balance
-!TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted
-!TP_WAVELET_CCURVE;Local contrast
-!TP_WAVELET_CH1;Whole chroma range
-!TP_WAVELET_CH2;Saturated/pastel
-!TP_WAVELET_CH3;Link contrast levels
-!TP_WAVELET_CHCU;Curve
-!TP_WAVELET_CHR;Chroma-contrast link strength
-!TP_WAVELET_CHRO;Saturated/pastel threshold
-!TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored.
-!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength"
-!TP_WAVELET_CHSL;Sliders
-!TP_WAVELET_CHTYPE;Chrominance method
-!TP_WAVELET_COLORT;Opacity Red-Green
-!TP_WAVELET_COMPCONT;Contrast
-!TP_WAVELET_COMPGAMMA;Compression gamma
-!TP_WAVELET_COMPGAMMA_TOOLTIP;Adjusting the gamma of the residual image allows you to equilibrate the data and histogram.
-!TP_WAVELET_COMPTM;Tone mapping
-!TP_WAVELET_CONTEDIT;'After' contrast curve
-!TP_WAVELET_CONTR;Gamut
-!TP_WAVELET_CONTRA;Contrast
-!TP_WAVELET_CONTRAST_MINUS;Contrast -
-!TP_WAVELET_CONTRAST_PLUS;Contrast +
-!TP_WAVELET_CONTRA_TOOLTIP;Changes contrast of the residual image.
-!TP_WAVELET_CTYPE;Chrominance control
-!TP_WAVELET_CURVEEDITOR_CC_TOOLTIP;Modifies local contrast as a function of the original local contrast (abscissa).\nLow abscissa values represent small local contrast (real values about 10..20).\n50% abscissa represents average local contrast (real value about 100..300).\n66% abscissa represents standard deviation of local contrast (real value about 300..800).\n100% abscissa represents maximum local contrast (real value about 3000..8000).
-!TP_WAVELET_CURVEEDITOR_CH;Contrast levels=f(Hue)
-!TP_WAVELET_CURVEEDITOR_CH_TOOLTIP;Modifies each level's contrast as a function of hue.\nTake care not to overwrite changes made with the Gamut sub-tool's hue controls.\nThe curve will only have an effect when wavelet contrast level sliders are non-zero.
-!TP_WAVELET_CURVEEDITOR_CL;L
-!TP_WAVELET_CURVEEDITOR_CL_TOOLTIP;Applies a final contrast luminance curve at the end of the wavelet treatment.
-!TP_WAVELET_CURVEEDITOR_HH;HH
-!TP_WAVELET_CURVEEDITOR_HH_TOOLTIP;Modifies the residual image's hue as a function of hue.
-!TP_WAVELET_DALL;All directions
-!TP_WAVELET_DAUB;Edge performance
-!TP_WAVELET_DAUB2;D2 - low
-!TP_WAVELET_DAUB4;D4 - standard
-!TP_WAVELET_DAUB6;D6 - standard plus
-!TP_WAVELET_DAUB10;D10 - medium
-!TP_WAVELET_DAUB14;D14 - high
-!TP_WAVELET_DAUB_TOOLTIP;Changes Daubechies coefficients:\nD4 = Standard,\nD14 = Often best performance, 10% more time-intensive.\n\nAffects edge detection as well as the general quality of the firsts levels. However the quality is not strictly related to this coefficient and can vary with images and uses.
-!TP_WAVELET_DONE;Vertical
-!TP_WAVELET_DTHR;Diagonal
-!TP_WAVELET_DTWO;Horizontal
-!TP_WAVELET_EDCU;Curve
-!TP_WAVELET_EDGCONT;Local contrast
-!TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, top-left, top-right and bottom-right represent respectively local contrast for low values, mean, mean+stdev and maxima.
-!TP_WAVELET_EDGE;Edge Sharpness
-!TP_WAVELET_EDGEAMPLI;Base amplification
-!TP_WAVELET_EDGEDETECT;Gradient sensitivity
-!TP_WAVELET_EDGEDETECTTHR;Threshold low (noise)
-!TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection)
-!TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky.
-!TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise.
-!TP_WAVELET_EDGESENSI;Edge sensitivity
-!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
-!TP_WAVELET_EDGTHRESH;Detail
-!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
-!TP_WAVELET_EDRAD;Radius
-!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
-!TP_WAVELET_EDSL;Threshold Sliders
-!TP_WAVELET_EDTYPE;Local contrast method
-!TP_WAVELET_EDVAL;Strength
-!TP_WAVELET_FINAL;Final Touchup
-!TP_WAVELET_FINEST;Finest
-!TP_WAVELET_HIGHLIGHT;Highlight luminance range
-!TP_WAVELET_HS1;Whole luminance range
-!TP_WAVELET_HS2;Shadows/Highlights
-!TP_WAVELET_HUESKIN;Skin hue
-!TP_WAVELET_HUESKIN_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_HUESKY;Sky hue
-!TP_WAVELET_HUESKY_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_ITER;Delta balance levels
-!TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels.
-!TP_WAVELET_LABEL;Wavelet Levels
-!TP_WAVELET_LARGEST;Coarsest
-!TP_WAVELET_LEVCH;Chroma
-!TP_WAVELET_LEVDIR_ALL;All levels in all directions
-!TP_WAVELET_LEVDIR_INF;Below or equal the level
-!TP_WAVELET_LEVDIR_ONE;One level
-!TP_WAVELET_LEVDIR_SUP;Above the level
-!TP_WAVELET_LEVELS;Wavelet levels
-!TP_WAVELET_LEVELS_TOOLTIP;Choose the number of detail levels the image is to be decomposed into. More levels require more RAM and require a longer processing time.
-!TP_WAVELET_LEVF;Contrast
-!TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1
-!TP_WAVELET_LEVONE;Level 2
-!TP_WAVELET_LEVTHRE;Level 4
-!TP_WAVELET_LEVTWO;Level 3
-!TP_WAVELET_LEVZERO;Level 1
-!TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength
-!TP_WAVELET_LIPST;Enhanced algoritm
-!TP_WAVELET_LOWLIGHT;Shadow luminance range
-!TP_WAVELET_MEDGREINF;First level
-!TP_WAVELET_MEDI;Reduce artifacts in blue sky
-!TP_WAVELET_MEDILEV;Edge detection
-!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine.
-!TP_WAVELET_NEUTRAL;Neutral
-!TP_WAVELET_NOIS;Denoise
-!TP_WAVELET_NOISE;Denoise and Refine
-!TP_WAVELET_NPHIGH;High
-!TP_WAVELET_NPLOW;Low
-!TP_WAVELET_NPNONE;None
-!TP_WAVELET_NPTYPE;Neighboring pixels
-!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced.
-!TP_WAVELET_OPACITY;Opacity Blue-Yellow
-!TP_WAVELET_OPACITYW;Contrast balance d/v-h curve
-!TP_WAVELET_OPACITYWL;Final local contrast
-!TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right.
-!TP_WAVELET_PASTEL;Pastel chroma
-!TP_WAVELET_PROC;Process
-!TP_WAVELET_RE1;Reinforced
-!TP_WAVELET_RE2;Unchanged
-!TP_WAVELET_RE3;Reduced
-!TP_WAVELET_RESCHRO;Chroma
-!TP_WAVELET_RESCON;Shadows
-!TP_WAVELET_RESCONH;Highlights
-!TP_WAVELET_RESID;Residual Image
-!TP_WAVELET_SAT;Saturated chroma
-!TP_WAVELET_SETTINGS;Wavelet Settings
-!TP_WAVELET_SKIN;Skin targetting/protection
-!TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_WAVELET_SKY;Sky targetting/protection
-!TP_WAVELET_SKY_TOOLTIP;At -100 sky-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 sky-tones are protected while all other tones are affected.
-!TP_WAVELET_STREN;Strength
-!TP_WAVELET_STRENGTH;Strength
-!TP_WAVELET_SUPE;Extra
-!TP_WAVELET_THR;Shadows threshold
-!TP_WAVELET_THRESHOLD;Highlight levels
-!TP_WAVELET_THRESHOLD2;Shadow levels
-!TP_WAVELET_THRESHOLD2_TOOLTIP;Only levels between 9 and 9 minus the value will be affected by the shadow luminance range. Other levels will be fully treated. The highest level possible is limited by the highlight level value (9 minus highlight level value).
-!TP_WAVELET_THRESHOLD_TOOLTIP;Only levels beyond the chosen value will be affected by the highlight luminance range. Other levels will be fully treated. The chosen value here limits the highest possible value of the shadow levels.
-!TP_WAVELET_THRH;Highlights threshold
-!TP_WAVELET_TILESBIG;Big tiles
-!TP_WAVELET_TILESFULL;Full image
-!TP_WAVELET_TILESIZE;Tiling method
-!TP_WAVELET_TILESLIT;Little tiles
-!TP_WAVELET_TILES_TOOLTIP;Processing the full image leads to better quality and is the recommended option, while using tiles is a fall-back solution for users with little RAM. Refer to RawPedia for memory requirements.
-!TP_WAVELET_TMSTRENGTH;Compression strength
-!TP_WAVELET_TMSTRENGTH_TOOLTIP;Control the strength of tone mapping or contrast compression of the residual image. When the value is different from 0, the Strength and Gamma sliders of the Tone Mapping tool in the Exposure tab will become grayed out.
-!TP_WAVELET_TMTYPE;Compression method
-!TP_WAVELET_TON;Toning
-!TP_WBALANCE_CLOUDY;Cloudy
-!TP_WBALANCE_DAYLIGHT;Daylight (sunny)
-!TP_WBALANCE_EQBLUERED;Blue/Red equalizer
-!TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behavior of "white balance" by modulating the blue/red balance.\nThis can be useful when shooting conditions:\na) are far from the standard illuminant (e.g. underwater),\nb) are far from conditions where calibrations were performed,\nc) where the matrices or ICC profiles are unsuitable.
-!TP_WBALANCE_FLASH55;Leica
-!TP_WBALANCE_FLASH60;Standard, Canon, Pentax, Olympus
-!TP_WBALANCE_FLASH65;Nikon, Panasonic, Sony, Minolta
-!TP_WBALANCE_FLASH_HEADER;Flash
-!TP_WBALANCE_FLUO1;F1 - Daylight
-!TP_WBALANCE_FLUO2;F2 - Cool White
-!TP_WBALANCE_FLUO3;F3 - White
-!TP_WBALANCE_FLUO4;F4 - Warm White
-!TP_WBALANCE_FLUO5;F5 - Daylight
-!TP_WBALANCE_FLUO6;F6 - Lite White
-!TP_WBALANCE_FLUO7;F7 - D65 Daylight Simulator
-!TP_WBALANCE_FLUO8;F8 - D50 / Sylvania F40 Design
-!TP_WBALANCE_FLUO9;F9 - Cool White Deluxe
-!TP_WBALANCE_FLUO10;F10 - Philips TL85
-!TP_WBALANCE_FLUO11;F11 - Philips TL84
-!TP_WBALANCE_FLUO12;F12 - Philips TL83
-!TP_WBALANCE_FLUO_HEADER;Fluorescent
-!TP_WBALANCE_GTI;GTI
-!TP_WBALANCE_HMI;HMI
-!TP_WBALANCE_JUDGEIII;JudgeIII
-!TP_WBALANCE_LAMP_HEADER;Lamp
-!TP_WBALANCE_LED_CRS;CRS SP12 WWMR16
-!TP_WBALANCE_LED_HEADER;LED
-!TP_WBALANCE_LED_LSI;LSI Lumelex 2040
-!TP_WBALANCE_PICKER;Pick
-!TP_WBALANCE_SHADE;Shade
-!TP_WBALANCE_SOLUX35;Solux 3500K
-!TP_WBALANCE_SOLUX41;Solux 4100K
-!TP_WBALANCE_SOLUX47;Solux 4700K (vendor)
-!TP_WBALANCE_SOLUX47_NG;Solux 4700K (Nat. Gallery)
-!TP_WBALANCE_TEMPBIAS;AWB temperature bias
-!TP_WBALANCE_TEMPBIAS_TOOLTIP;Allows to alter the computation of the "auto white balance"\nby biasing it towards warmer or cooler temperatures. The bias\nis expressed as a percentage of the computed temperature,\nso that the result is given by "computedTemp + computedTemp * bias".
-!TP_WBALANCE_TUNGSTEN;Tungsten
-!TP_WBALANCE_WATER1;UnderWater 1
-!TP_WBALANCE_WATER2;UnderWater 2
-!TP_WBALANCE_WATER_HEADER;UnderWater
-!ZOOMPANEL_100;(100%)
-!ZOOMPANEL_NEWCROPWINDOW;Open (new) detail window
-!ZOOMPANEL_ZOOM100;Zoom to 100%\nShortcut: z
-!ZOOMPANEL_ZOOMFITCROPSCREEN;Fit crop to screen\nShortcut: f
-!ZOOMPANEL_ZOOMFITSCREEN;Fit whole image to screen\nShortcut: Alt-f
-!ZOOMPANEL_ZOOMIN;Zoom In\nShortcut: +
-!ZOOMPANEL_ZOOMOUT;Zoom Out\nShortcut: -
diff --git a/rtdata/languages/Deutsch b/rtdata/languages/Deutsch
index 95fc79d76..4e9c639ce 100644
--- a/rtdata/languages/Deutsch
+++ b/rtdata/languages/Deutsch
@@ -177,7 +177,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;LMMSE-Verbesserungsstufen überspringen
EXPORT_BYPASS_SHARPENEDGE;Kantenschärfung überspringen
EXPORT_BYPASS_SHARPENING;Schärfung überspringen
EXPORT_BYPASS_SHARPENMICRO;Mikrokontrast überspringen
-EXPORT_BYPASS_SH_HQ;Schatten/Lichter überspringen\n(Schärfemaske)
EXPORT_FASTEXPORTOPTIONS;Schnell-Export - Einstellungen
EXPORT_INSTRUCTIONS;Die Einstellungen zum schnellen Export\nerlauben es, zeit- und ressourcenintensive\nEntwicklungsschritte zu überspringen und dafür\ndie Warteschlangenverarbeitung mit\nschnellen Export-Einstellungen auszuführen.\nDieses Vorgehen wird zur schnelleren\nGenerierung von gering aufgelösten Bildern\nempfohlen, falls es auf die Geschwindigkeit\nankommt oder für ein oder mehrere Bilder\nandere Ausgabegrößen gewünscht werden,\nohne Änderungen an deren gespeicherten\nParameter vornehmen zu müssen.
EXPORT_MAXHEIGHT;Maximale Höhe:
@@ -190,11 +189,11 @@ EXPORT_USE_FAST_PIPELINE_TIP;Wendet alle Bearbeitungsschritte, im Gegensatz\nzu
EXPORT_USE_NORMAL_PIPELINE;Standard
EXTPROGTARGET_1;RAW
EXTPROGTARGET_2;Stapelverarbeitung beendet
-FILEBROWSER_ADDDELTEMPLATE;Vorlagen hinzufügen/entfernen...
FILEBROWSER_APPLYPROFILE;Profil anwenden
FILEBROWSER_APPLYPROFILE_PARTIAL;Profil selektiv anwenden
FILEBROWSER_AUTODARKFRAME;Automatisches Dunkelbild
FILEBROWSER_AUTOFLATFIELD;Automatisches Weißbild
+FILEBROWSER_BROWSEPATHBUTTONHINT;Klicken Sie hier, um den angegebenen Pfad zu öffnen, den Ordner\nneu zu laden und das Suchkriterium anzuwenden.
FILEBROWSER_BROWSEPATHHINT;Einen Pfad eingeben:\nTaste:\nStrg + o Setzt den Cursor in das Eingabefeld\nEnter Öffnet den Pfad\nEsc Änderungen verwerfen\nUmschalt + Esc Eingabefeld verlassen\n\nSchnellnavigation:\nTaste:\n~ “Home“-Verzeichnis des Benutzers\n! Bilder-Verzeichnis des Benutzers
FILEBROWSER_CACHE;Festplatten-Cache
FILEBROWSER_CACHECLEARFROMFULL;Alle zwischengespeicherte Profile löschen
@@ -324,7 +323,6 @@ GIMP_PLUGIN_INFO;Willkommen zum RawTherapee GIMP-Plugin!\nNach den Änderungen b
HISTOGRAM_TOOLTIP_B;Blau-Histogramm ein-/ausblenden.
HISTOGRAM_TOOLTIP_BAR;RGB-Anzeigeleiste ein-/ausblenden.
HISTOGRAM_TOOLTIP_CHRO;Chromatizität-Histogramm ein/ausblenden.
-HISTOGRAM_TOOLTIP_FULL;Skaliertes Histogramm ein/ausschalten.
HISTOGRAM_TOOLTIP_G;Grün-Histogramm ein-/ausblenden.
HISTOGRAM_TOOLTIP_L;CIELab-Luminanz-Histogramm ein-/ausblenden.
HISTOGRAM_TOOLTIP_MODE;Schaltet zwischen linearer, logarithmischer-linearer und\nlogarithmischer-logarithmischer Skalierung um.
@@ -1004,8 +1002,6 @@ MAIN_TAB_RAW;RAW
MAIN_TAB_RAW_TOOLTIP;Taste: Alt + r
MAIN_TAB_TRANSFORM;Transformieren
MAIN_TAB_TRANSFORM_TOOLTIP;Taste: Alt + t
-MAIN_TAB_WAVELET;Wavelet
-MAIN_TAB_WAVELET_TOOLTIP;Taste: Alt + w
MAIN_TOOLTIP_BACKCOLOR0;Hintergrundfarbe der Vorschau basierend auf dem Oberflächendesign.\nTaste: 9
MAIN_TOOLTIP_BACKCOLOR1;Hintergrundfarbe der Vorschau: Schwarz\nTaste: 9
MAIN_TOOLTIP_BACKCOLOR2;Hintergrundfarbe der Vorschau: Weiß\nTaste: 9
@@ -1119,7 +1115,6 @@ PARTIALPASTE_SOFTLIGHT;Weiches Licht
PARTIALPASTE_TM_FATTAL;Dynamikkompression
PARTIALPASTE_VIBRANCE;Dynamik
PARTIALPASTE_VIGNETTING;Vignettierungskorrektur
-PARTIALPASTE_WAVELETGROUP;Wavelet
PARTIALPASTE_WHITEBALANCE;Weißabgleich
PREFERENCES_ADD;HINZU
PREFERENCES_APPEARANCE;Oberflächendesign (erfordert Neustart)
@@ -1137,7 +1132,6 @@ PREFERENCES_BEHADDALLHINT;Setzt alle Parameter auf Hinzufügen.\nAnpassun
PREFERENCES_BEHAVIOR;Verhalten
PREFERENCES_BEHSETALL;Alle setzen
PREFERENCES_BEHSETALLHINT;Setzt alle Parameter auf Setzen.\nAnpassungen der Parameter in der Hintergrundstapelverarbeitung werden als Absolut zu den gespeicherten Werten interpretiert.
-PREFERENCES_BLACKBODY;Wolfram
PREFERENCES_CACHECLEAR;Löschen
PREFERENCES_CACHECLEAR_ALL;Alle Dateien im Zwischenspeicher löschen:
PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Alle Dateien im Zwischenspeicher löschen mit Ausnahme der Bearbeitungsprofile:
@@ -1146,6 +1140,12 @@ PREFERENCES_CACHECLEAR_SAFETY;Nur Dateien im Zwischenspeicher werden gelöscht.
PREFERENCES_CACHEMAXENTRIES;Maximale Anzahl der Miniaturbilder im Festplatten-Cache
PREFERENCES_CACHEOPTS;Einstellungen des Festplatten-Cache für Miniaturbilder
PREFERENCES_CACHETHUMBHEIGHT;Maximale Höhe der Miniaturbilder
+PREFERENCES_CHUNKSIZES;Kacheln pro Thread
+PREFERENCES_CHUNKSIZE_RAW_AMAZE;AMaZE-Farbinterpolation
+PREFERENCES_CHUNKSIZE_RAW_CA;RAW-CA-Korrektur
+PREFERENCES_CHUNKSIZE_RAW_RCD;RCD-Farbinterpolation
+PREFERENCES_CHUNKSIZE_RAW_XT;Xtrans-Farbinterpolation
+PREFERENCES_CHUNKSIZE_RGB;RGB-Verarbeitung
PREFERENCES_CLIPPINGIND;Anzeige zu heller/dunkler Bereiche
PREFERENCES_CLUTSCACHE;HaldCLUT-Zwischenspeicher
PREFERENCES_CLUTSCACHE_LABEL;Maximale Anzahl CLUTs im Zwischenspeicher
@@ -1168,11 +1168,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Format
PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;Tag-ID
PREFERENCES_CUSTPROFBUILDPATH;Anwendungspfad
-PREFERENCES_D50;5000K
-PREFERENCES_D50_OLD;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
PREFERENCES_DARKFRAMEFOUND;Gefunden
PREFERENCES_DARKFRAMESHOTS;Aufnahmen
PREFERENCES_DARKFRAMETEMPLATES;Vorlagen
@@ -1195,32 +1190,15 @@ PREFERENCES_FLATFIELDFOUND;Gefunden
PREFERENCES_FLATFIELDSDIR;Weißbild-Verzeichnis
PREFERENCES_FLATFIELDSHOTS;Aufnahmen
PREFERENCES_FLATFIELDTEMPLATES;Vorlagen
-PREFERENCES_FLUOF2;Fluoreszenz F2
-PREFERENCES_FLUOF7;Fluoreszenz F7
-PREFERENCES_FLUOF11;Fluoreszenz F11
PREFERENCES_FORIMAGE;Für Bilddateien
PREFERENCES_FORRAW;Für RAW-Dateien
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Gleiche Miniaturbildgröße in der Dateiverwaltung und dem Filmstreifen verwenden
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Unterschiedliche Miniaturbildgrößen benötigen mehr Verarbeitungszeit beim Wechsel zwischen der Dateiverwaltung und dem Editor
PREFERENCES_GIMPPATH;GIMP Installationsverzeichnis
-PREFERENCES_GREY;Yb-Luminanz (%) des Ausgabegerätes
-PREFERENCES_GREY05;Yb = 05 CIE L#30
-PREFERENCES_GREY10;Yb = 10 CIE L#40
-PREFERENCES_GREY15;Yb = 15 CIE L#45
-PREFERENCES_GREY18;Yb = 18 CIE L#50
-PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb = 23 CIE L#55
-PREFERENCES_GREY30;Yb = 30 CIE L#60
-PREFERENCES_GREY40;Yb = 40 CIE L#70
-PREFERENCES_GREYSC;Szenen-Yb-Luminanz (%)
-PREFERENCES_GREYSC18;Yb = 18 CIE L#49
-PREFERENCES_GREYSCA;Automatisch
PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogramm linksseitig
-PREFERENCES_HISTOGRAMWORKING;Das Arbeitsprofil zur Darstellung des Haupthistogramms verwenden
PREFERENCES_HISTOGRAM_TOOLTIP;Wenn aktiviert, wird das Arbeitsprofil für die Darstellung\ndes Haupthistogramms verwendet, andernfalls das des\ngammakorrigierten Ausgangsprofils.
PREFERENCES_HLTHRESHOLD;Lichter - Schwelle
PREFERENCES_ICCDIR;ICC-Profile-Verzeichnis
-PREFERENCES_IMG_RELOAD_NEEDED;Änderungen werden nur auf neu geöffnete Bilder angewendet
PREFERENCES_IMPROCPARAMS;Standard-Bearbeitungsprofile
PREFERENCES_INSPECT_LABEL;Bildzwischenspeicher
PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximale Anzahl Bilder im Zwischenspeicher
@@ -1239,7 +1217,6 @@ PREFERENCES_MENUGROUPLABEL;Untermenü Farbmarkierung
PREFERENCES_MENUGROUPPROFILEOPERATIONS;Untermenü Profiloperationen
PREFERENCES_MENUGROUPRANK;Untermenü Bewertung
PREFERENCES_MENUOPTIONS;Menüoptionen
-PREFERENCES_METADATA;Metadaten
PREFERENCES_MONINTENT;Standard-Rendering-Intent
PREFERENCES_MONITOR;Monitor
PREFERENCES_MONPROFILE;Standardfarbprofil
@@ -1262,6 +1239,8 @@ PREFERENCES_PARSEDEXTADDHINT;Dateityp zur Liste hinzufügen
PREFERENCES_PARSEDEXTDELHINT;Ausgewählten Dateityp aus Liste entfernen
PREFERENCES_PARSEDEXTDOWNHINT;Ausgewählten Dateityp nach unten verschieben.
PREFERENCES_PARSEDEXTUPHINT;Ausgewählten Dateityp nach oben verschieben.
+PREFERENCES_PERFORMANCE_MEASURE;Messung aktivieren
+PREFERENCES_PERFORMANCE_MEASURE_HINT;Protokolliert die Bearbeitungszeiten in der Konsole.
PREFERENCES_PERFORMANCE_THREADS;Threads
PREFERENCES_PERFORMANCE_THREADS_LABEL;Maximale Anzahl Threads der Rauschreduzierung und Wavelet (0 = Automatik)
PREFERENCES_PREVDEMO;Farbinterpolation
@@ -1315,9 +1294,7 @@ PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutrales RAW-Bild
PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Eingebundenes JPEG wenn in Originalgröße, sonst neutrales RAW-Bild
PREFERENCES_TP_LABEL;Werkzeugbereich:
PREFERENCES_TP_VSCROLLBAR;Keine vertikale Scrollbar
-PREFERENCES_TUNNELMETADATA;Exif/XMP unverändert in die Ausgabedatei übernehmen.
PREFERENCES_USEBUNDLEDPROFILES;Standardprofile verwenden
-PREFERENCES_VIEW;Weißabgleich-Einstellung des Ausgabegerätes (Monitor, TV, Projektor, usw.)
PREFERENCES_WORKFLOW;Layout
PROFILEPANEL_COPYPPASTE;Zu kopierende Parameter
PROFILEPANEL_GLOBALPROFILES;Standardprofile
@@ -1338,6 +1315,11 @@ PROFILEPANEL_TOOLTIPCOPY;Profil in Zwischenablage kopieren.\n\nStrg-Taste beim K
PROFILEPANEL_TOOLTIPLOAD;Profil aus Datei laden.\n\nStrg-Taste beim Klicken festhalten, um\nzu ladende Parameter auszuwählen.
PROFILEPANEL_TOOLTIPPASTE;Profil aus Zwischenablage einfügen.\n\nStrg-Taste beim Klicken festhalten, um\neinzufügende Parameter auszuwählen.
PROFILEPANEL_TOOLTIPSAVE;Profil speichern.\n\nStrg-Taste beim Klicken festhalten, um\nzu speichernde Parameter auszuwählen.
+PROGRESSBAR_DECODING;Dekodiere...
+PROGRESSBAR_GREENEQUIL;Grünbalance...
+PROGRESSBAR_HLREC;Lichterrekonstruktion...
+PROGRESSBAR_HOTDEADPIXELFILTER;Hot/Dead-Pixel-Filter...
+PROGRESSBAR_LINEDENOISE;Linienrauschfilter...
PROGRESSBAR_LOADING;Lade Bild...
PROGRESSBAR_LOADINGTHUMBS;Lade Miniaturbilder...
PROGRESSBAR_LOADJPEG;Lade JPEG...
@@ -1346,6 +1328,7 @@ PROGRESSBAR_LOADTIFF;Lade TIFF...
PROGRESSBAR_NOIMAGES;Keine Bilder gefunden
PROGRESSBAR_PROCESSING;Berechne Bild...
PROGRESSBAR_PROCESSING_PROFILESAVED;Verarbeitungsprofil gespeichert
+PROGRESSBAR_RAWCACORR;RAW-CA-Korrektur...
PROGRESSBAR_READY;Bereit
PROGRESSBAR_SAVEJPEG;Speichere JPEG...
PROGRESSBAR_SAVEPNG;Speichere PNG...
@@ -1370,7 +1353,6 @@ SAVEDLG_FILEFORMAT;Dateiformat
SAVEDLG_FILEFORMAT_FLOAT; Fließkomma
SAVEDLG_FORCEFORMATOPTS;Erzwinge Speicheroptionen
SAVEDLG_JPEGQUAL;JPEG-Qualität
-SAVEDLG_PNGCOMPR;PNG-Kompression
SAVEDLG_PUTTOQUEUE;Zur Warteschlange hinzufügen
SAVEDLG_PUTTOQUEUEHEAD;An den Anfang der Warteschlange hinzufügen
SAVEDLG_PUTTOQUEUETAIL;An das Ende der Warteschlange hinzufügen
@@ -1527,8 +1509,6 @@ TP_COLORAPP_SURROUND_DARK;Dunkel
TP_COLORAPP_SURROUND_DIM;Gedimmt
TP_COLORAPP_SURROUND_EXDARK;Extrem Dunkel (Cutsheet)
TP_COLORAPP_SURROUND_TOOLTIP;Verändert Töne und Farben unter Berücksichtigung der\nBetrachtungsbedingungen des Ausgabegerätes.\n\nDurchschnitt:\nDurchschnittliche Lichtumgebung (Standard).\nDas Bild wird nicht angepasst.\n\nGedimmt:\nGedimmte Umgebung (TV). Das Bild wird leicht dunkel.\n\nDunkel:\nDunkle Umgebung (Projektor). Das Bild wird dunkler.\n\nExtrem dunkel:\nExtrem dunkle Umgebung. Das Bild wird sehr dunkel.
-TP_COLORAPP_SURSOURCE;Dunkle Umgebung
-TP_COLORAPP_SURSOURCE_TOOLTIP;Kann verwendet werden, wenn das Quellbild\neinen schwarzen Rahmen besitzt.
TP_COLORAPP_TCMODE_BRIGHTNESS;Helligkeit (Q)
TP_COLORAPP_TCMODE_CHROMA;Buntheit (H)
TP_COLORAPP_TCMODE_COLORF;Farbigkeit (M)
@@ -1613,6 +1593,7 @@ TP_CROP_GTTRIANGLE2;Goldenes Dreieck 2
TP_CROP_GUIDETYPE;Hilfslinien:
TP_CROP_H;Höhe
TP_CROP_LABEL;Ausschnitt
+TP_CROP_PPI;PPI
TP_CROP_RESETCROP;Zurücksetzen
TP_CROP_SELECTCROP;Ausschnitt
TP_CROP_W;Breite
@@ -1629,7 +1610,6 @@ TP_DEHAZE_SHOW_DEPTH_MAP;Maske anzeigen
TP_DEHAZE_STRENGTH;Intensität
TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto-Multizonen
TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatisch Global
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Bewertung des Farbrauschens.\nDie Bewertung ist ungenau und sehr subjektiv!
TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Delta-Chrominanz Blau / Gelb
TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominanzkurve
TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Erhöht / Reduziert die Intensität der\nChrominanz-Rauschreduzierung in\nAbhängigkeit der Farbsättigung.
@@ -1647,8 +1627,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Rauschen: Mittelwert = %1 Hoch =
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Rauschen: Mittelwert = --- Hoch = ---
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Kachelgröße = %1 Zentrum: Tx = %2 Ty = %2
TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Delta-Chrominanz Rot / Grün
-TP_DIRPYRDENOISE_ENH;Erweiterter Modus
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Erhöht die Qualität der Rauschreduzierung auf Kosten einer um 20% erhöhten Verarbeitungszeit.
TP_DIRPYRDENOISE_LABEL;Rauschreduzierung
TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminanzkontrolle
TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminanzkurve
@@ -1657,7 +1635,6 @@ TP_DIRPYRDENOISE_LUMINANCE_FRAME;Luminanz
TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminanz
TP_DIRPYRDENOISE_MAIN_COLORSPACE;Farbraum
TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;L*a*b*
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_LABEL;Rauschreduzierung
TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;Für RAW-Bilder kann entweder die RGB-\noder L*a*b*-Methode verwendet werden.\n\nFür andere Bilder wird unabhängig von der\nAuswahl immer die L*a*b*-Methode verwendet.
TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
@@ -1678,7 +1655,6 @@ TP_DIRPYRDENOISE_MEDIAN_PASSES;Iterationen
TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Manchmal führt ein kleines 3×3-Fenster mit\nmehreren Iterationen zu besseren Ergebnissen\nals ein 7×7-Fenster mit nur einer Iteration.
TP_DIRPYRDENOISE_MEDIAN_TYPE;Mediantyp
TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Einen Medianfilter mit der gewünschten Fenstergröße auswählen.\nJe größer das Fenster, umso länger dauert die Verarbeitungszeit.\n\n3×3 weich: Nutzt 5 Pixel in einem 3×3-Pixelfenster.\n3×3: Nutzt 9 Pixel in einem 3×3-Pixelfenster.\n5×5 weich: Nutzt 13 Pixel in einem 5×5-Pixelfenster.\n5×5: Nutzt 25 Pixel in einem 5×5-Pixelfenster.\n7×7: Nutzt 49 Pixel in einem 7×7-Pixelfenster.\n9×9: Nutzt 81 Pixel in einem 9×9-Pixelfenster.\n\nManchmal ist das Ergebnis mit einem kleineren Fenster und mehreren Iterationen besser, als mit einem größeren und nur einer Iteration.
-TP_DIRPYRDENOISE_SLI;Regler
TP_DIRPYRDENOISE_TYPE_3X3;3×3
TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 weich
TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1752,10 +1728,6 @@ TP_FLATFIELD_BT_VERTICAL;Vertikal
TP_FLATFIELD_CLIPCONTROL;Kontrolle zu heller Bereiche
TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Verhindert das Abschneiden der Lichter. Wenn\nvor dem Anwenden des Weißbildes schon\nabgeschnittene Lichter vorhanden sind, kann\nes zu einem Farbstich kommen.
TP_FLATFIELD_LABEL;Weißbild
-TP_GAMMA_CURV;Gamma
-TP_GAMMA_FREE;Freies Gamma
-TP_GAMMA_OUTPUT;Ausgabe-Gamma
-TP_GAMMA_SLOP;Gradient (linear)
TP_GENERAL_11SCALE_TOOLTIP;Der Effekt dieses Werkzeugs ist nur in der 100%-Ansicht akkurat oder sichtbar.
TP_GRADIENT_CENTER;Rotationsachse
TP_GRADIENT_CENTER_X;Rotationsachse X
@@ -1787,8 +1759,6 @@ TP_ICM_APPLYHUESATMAP;Basistabelle
TP_ICM_APPLYHUESATMAP_TOOLTIP;Die eingebettete DCP-Basistabelle verwenden.\nDie Einstellung ist nur verfügbar wenn sie vom\nEingangsfarbprofil unterstützt wird.
TP_ICM_APPLYLOOKTABLE;“Look“-Tabelle
TP_ICM_APPLYLOOKTABLE_TOOLTIP;Die eingebettete DCP-“Look“-Tabelle verwenden.\nDie Einstellung ist nur verfügbar wenn sie vom\nEingangsfarbprofil unterstützt wird.
-TP_ICM_BLENDCMSMATRIX;ICC Lichter mit Matrix überlagern
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Stellt bei Verwendung von LUT-basierten ICC-Profilen die Lichter wieder her.
TP_ICM_BPC;Schwarzpunkt-Kompensation
TP_ICM_DCPILLUMINANT;Illumination
TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpoliert
@@ -1919,7 +1889,6 @@ TP_RAWCACORR_AUTOIT_TOOLTIP;Diese Einstellung ist verfügbar, wenn "Autokorrektu
TP_RAWCACORR_AVOIDCOLORSHIFT;Farbverschiebungen vermeiden
TP_RAWCACORR_CABLUE;Blau
TP_RAWCACORR_CARED;Rot
-TP_RAWCACORR_CASTR;Intensität
TP_RAWEXPOS_BLACKS;Schattenkompression
TP_RAWEXPOS_BLACK_0;Grün 1 (Master)
TP_RAWEXPOS_BLACK_1;Rot
@@ -1967,7 +1936,6 @@ TP_RAW_LMMSE_TOOLTIP;Fügt Gamma (Stufe 1), Median (Stufe 2-4)\nund Optimierung
TP_RAW_MONO;Mono
TP_RAW_NONE;Keine
TP_RAW_PIXELSHIFT;Pixel-Shift
-TP_RAW_PIXELSHIFTADAPTIVE;Adaptive Erkennung
TP_RAW_PIXELSHIFTBLUR;Unschärfebewegungsmaske
TP_RAW_PIXELSHIFTDMETHOD;Bewegungsmethode
TP_RAW_PIXELSHIFTEPERISO;Empfindlichkeit
@@ -1976,34 +1944,17 @@ TP_RAW_PIXELSHIFTEQUALBRIGHT;Frame-Helligkeit angleichen
TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Ausgleich pro Kanal
TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;EIN: Individueller Ausgleich der RGB-Kanäle.\nAUS: Identischer Ausgleichsfaktor für alle Kanäle.
TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Gleicht die Helligkeit der Frames an den aktuellen Frame an.\n\nSind überbelichtete Bereiche vorhanden wählen Sie den hellsten Frame aus um\nMagenta-Farbstiche zu vermeiden oder aktivieren Sie die Bewegungskorrektur.
-TP_RAW_PIXELSHIFTEXP0;Experimentell
TP_RAW_PIXELSHIFTGREEN;Bewegung im Grün-Kanal erkennen
TP_RAW_PIXELSHIFTHOLEFILL;Lücken in der Bewegungsmaske erkennen
TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Lücken in der Bewegungsmaske erkennen.
-TP_RAW_PIXELSHIFTLMMSE;LMMSE für Bewegungsbereiche verwenden
-TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;LMMSE anstatt AMaZE für bewegte Bildbereiche verwenden.\nSinnvoll bei High-ISO-Aufnahmen.
-TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 new threshold
TP_RAW_PIXELSHIFTMEDIAN;Median
-TP_RAW_PIXELSHIFTMEDIAN3;Aktuellen Frame vom Median ausschließen.
-TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Schließt den aktuellen Frame vom Median aus.\nNützlich, wenn sich bewegte Objekte im Frame 2\nund 3 überlappen.
TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Verwenden Sie den Median aller Frames anstelle des\nausgewählten Frames für Regionen mit Bewegung.\nEntfernt Objekte, die an verschiedenen Stellen in allen\nFrames vorkommen. Erzeugt einen Bewegungseffekt\nauf langsame (überlappende) Objekte.
TP_RAW_PIXELSHIFTMM_AUTO;Automatisch
TP_RAW_PIXELSHIFTMM_CUSTOM;Benutzerdefiniert
TP_RAW_PIXELSHIFTMM_OFF;Aus
TP_RAW_PIXELSHIFTMOTION;Motion detection level (deprecated)
-TP_RAW_PIXELSHIFTMOTIONCORRECTION;Green motion correction size
TP_RAW_PIXELSHIFTMOTIONMETHOD;Bewegungskorrektur
-TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 = Keine Bewegungserkennung\n1 - 99 = Bewegung wird entsprechend dem Wert erkannt.\nHöhere Werte erhöhen die Trefferquote\n100 = Der mit AMaZE interpolierte Frame wird verwendet.
-TP_RAW_PIXELSHIFTNONGREENAMAZE;Check red/blue amaze
TP_RAW_PIXELSHIFTNONGREENCROSS;Bewegung im Rot/Blau-Kanal erkennen
-TP_RAW_PIXELSHIFTNONGREENCROSS2;Check green amaze
-TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Check red/blue horizontal
-TP_RAW_PIXELSHIFTNONGREENVERTICAL;Check red/blue vertical
-TP_RAW_PIXELSHIFTNREADISO;nRead
-TP_RAW_PIXELSHIFTONEGREEN;Benutze ein Grün
-TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Benutze ein Grün anstelle des\nDurchschnitts beider Grüns für\nBereiche ohne Bewegung.
-TP_RAW_PIXELSHIFTPRNU;PRNU (%)
-TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Red&Blue weight
TP_RAW_PIXELSHIFTSHOWMOTION;Bewegungsmaske anzeigen
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Nur Maske anzeigen
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Zeigt die Bewegungsmaske ohne Bild.
@@ -2012,15 +1963,14 @@ TP_RAW_PIXELSHIFTSIGMA;Unschärferadius
TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;Der Standard-Radius von 1,0 passt in der Regel für die Basis-ISO.\nErhöhen Sie den Wert für High-ISO-Aufnahmen, 5,0 ist ein guter\nAusgangspunkt für High-ISO-Aufnahmen. Achten Sie auf die\nBewegungsmaske, während Sie den Wert ändern.
TP_RAW_PIXELSHIFTSMOOTH;Weicher Übergang
TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Weicher Übergang zwischen Bereichen mit und ohne Bewegung.\n0 = Aus\n1 = AMaZE/LMMSE oder Median
-TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blue
-TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Green
-TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Red
TP_RAW_RCD;RCD
TP_RAW_RCDVNG4;RCD + VNG4
TP_RAW_SENSOR_BAYER_LABEL;Sensor mit Bayer-Matrix
TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;Mit “3-Pass“ erzielt man die besten Ergebnisse\n(empfohlen bei Bildern mit niedrigen ISO-Werten).\n\nBei hohen ISO-Werten unterscheidet sich “1-Pass“\nkaum gegenüber “3-Pass“, ist aber deutlich schneller.\n\n"+ schnell" erzeugt weniger Artefakte in kontrast-\narmen Bereichen.
TP_RAW_SENSOR_XTRANS_LABEL;Sensor mit X-Trans-Matrix
TP_RAW_VNG4;VNG4
+TP_RAW_XTRANS;X-Trans
+TP_RAW_XTRANSFAST;Schnell-X-Trans
TP_RESIZE_ALLOW_UPSCALING;Hochskalieren zulassen
TP_RESIZE_APPLIESTO;Anwenden auf:
TP_RESIZE_CROPPEDAREA;Ausschnitt
@@ -2052,7 +2002,6 @@ TP_RETINEX_GAIN;Kontrast
TP_RETINEX_GAINOFFS;Verstärkung und Ausgleich (Helligkeit)
TP_RETINEX_GAINTRANSMISSION;Transmissionsverstärkung
TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Ändert die Helligkeit durch Verstärkung oder\nAbschwächung der Transmissionskarte.
-TP_RETINEX_GAIN_TOOLTIP;Wirkt sich auf das verarbeitete Bild aus. Wird für schwarze oder weiße Pixel verwendet und hilft das Histogramm auszugleichen.
TP_RETINEX_GAMMA;Gammakorrektur
TP_RETINEX_GAMMA_FREE;Benutzerdefiniert
TP_RETINEX_GAMMA_HIGH;Hoch
@@ -2130,10 +2079,8 @@ TP_SAVEDIALOG_OK_TIP;Taste: Strg + Enter
TP_SHADOWSHLIGHTS_HIGHLIGHTS;Lichter
TP_SHADOWSHLIGHTS_HLTONALW;Tonwertbreite Lichter
TP_SHADOWSHLIGHTS_LABEL;Schatten / Lichter
-TP_SHADOWSHLIGHTS_LOCALCONTR;Lokaler Kontrast
TP_SHADOWSHLIGHTS_RADIUS;Radius
TP_SHADOWSHLIGHTS_SHADOWS;Schatten
-TP_SHADOWSHLIGHTS_SHARPMASK;Schärfemaske
TP_SHADOWSHLIGHTS_SHTONALW;Tonwertbreite Schatten
TP_SHARPENEDGE_AMOUNT;Intensität
TP_SHARPENEDGE_LABEL;Kantenschärfung
@@ -2411,25 +2358,3 @@ ZOOMPANEL_ZOOMFITSCREEN;An Bildschirm anpassen.\nTaste: Alt + f
ZOOMPANEL_ZOOMIN;Hineinzoomen\nTaste: +
ZOOMPANEL_ZOOMOUT;Herauszoomen\nTaste: -
-!!!!!!!!!!!!!!!!!!!!!!!!!
-! Untranslated keys follow; remove the ! prefix after an entry is translated.
-!!!!!!!!!!!!!!!!!!!!!!!!!
-
-FILEBROWSER_BROWSEPATHBUTTONHINT;Klicken Sie hier, um den angegebenen Pfad zu öffnen, den Ordner\nneu zu laden und das Suchkriterium anzuwenden.
-PREFERENCES_CHUNKSIZES;Kacheln pro Thread
-PREFERENCES_CHUNKSIZE_RAW_AMAZE;AMaZE-Farbinterpolation
-PREFERENCES_CHUNKSIZE_RAW_CA;RAW-CA-Korrektur
-PREFERENCES_CHUNKSIZE_RAW_RCD;RCD-Farbinterpolation
-PREFERENCES_CHUNKSIZE_RAW_XT;Xtrans-Farbinterpolation
-PREFERENCES_CHUNKSIZE_RGB;RGB-Verarbeitung
-PREFERENCES_PERFORMANCE_MEASURE;Messung aktivieren
-PREFERENCES_PERFORMANCE_MEASURE_HINT;Protokolliert die Bearbeitungszeiten in der Konsole.
-PROGRESSBAR_DECODING;Dekodiere...
-PROGRESSBAR_GREENEQUIL;Grünbalance...
-PROGRESSBAR_HLREC;Lichterrekonstruktion...
-PROGRESSBAR_HOTDEADPIXELFILTER;Hot/Dead-Pixel-Filter...
-PROGRESSBAR_LINEDENOISE;Linienrauschfilter...
-PROGRESSBAR_RAWCACORR;RAW-CA-Korrektur...
-TP_CROP_PPI;PPI
-TP_RAW_XTRANS;X-Trans
-TP_RAW_XTRANSFAST;Schnell-X-Trans
diff --git a/rtdata/languages/English (UK) b/rtdata/languages/English (UK)
index a39d2ee71..6bc51a0ac 100644
--- a/rtdata/languages/English (UK)
+++ b/rtdata/languages/English (UK)
@@ -218,7 +218,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
!EXPORT_BYPASS_SHARPENEDGE;Bypass Edge Sharpening
!EXPORT_BYPASS_SHARPENING;Bypass Sharpening
!EXPORT_BYPASS_SHARPENMICRO;Bypass Microcontrast
-!EXPORT_BYPASS_SH_HQ;Bypass Sharp Mask Shadows/Highlights
!EXPORT_FASTEXPORTOPTIONS;Fast Export Options
!EXPORT_INSTRUCTIONS;Fast Export options provide overrides to bypass time and resource consuming development settings and to run queue processing using the fast export settings instead. This method is recommended for quicker generation of lower resolution images when speed is a priority or when resized output is desired for one or many images without making modifications to their saved development parameters.
!EXPORT_MAXHEIGHT;Maximum height:
@@ -231,7 +230,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
!EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
!EXTPROGTARGET_1;raw
!EXTPROGTARGET_2;queue-processed
-!FILEBROWSER_ADDDELTEMPLATE;Add/Del templates...
!FILEBROWSER_APPLYPROFILE;Apply
!FILEBROWSER_APPLYPROFILE_PARTIAL;Apply - partial
!FILEBROWSER_AUTODARKFRAME;Auto dark-frame
@@ -1129,7 +1127,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
!PREFERENCES_BEHADDALLHINT;Set all parameters to the Add mode.\nAdjustments of parameters in the batch tool panel will be deltas to the stored values.
!PREFERENCES_BEHSETALL;All to 'Set'
!PREFERENCES_BEHSETALLHINT;Set all parameters to the Set mode.\nAdjustments of parameters in the batch tool panel will be absolute, the actual values will be displayed.
-!PREFERENCES_BLACKBODY;Tungsten
!PREFERENCES_CACHECLEAR;Clear
!PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
!PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
@@ -1166,11 +1163,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
!PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
!PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
!PREFERENCES_CUSTPROFBUILDPATH;Executable path
-!PREFERENCES_D50;Settings in main menu
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_D55;5500K
-!PREFERENCES_D60;6000K
-!PREFERENCES_D65;6500K
!PREFERENCES_DARKFRAMEFOUND;Found
!PREFERENCES_DARKFRAMESHOTS;shots
!PREFERENCES_DARKFRAMETEMPLATES;templates
@@ -1193,31 +1185,14 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
!PREFERENCES_FLATFIELDSDIR;Flat-fields directory
!PREFERENCES_FLATFIELDSHOTS;shots
!PREFERENCES_FLATFIELDTEMPLATES;templates
-!PREFERENCES_FLUOF2;Fluorescent F2
-!PREFERENCES_FLUOF7;Fluorescent F7
-!PREFERENCES_FLUOF11;Fluorescent F11
!PREFERENCES_FORIMAGE;For non-raw photos
!PREFERENCES_FORRAW;For raw photos
!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
!PREFERENCES_GIMPPATH;GIMP installation directory
-!PREFERENCES_GREY;Output device's Yb luminance (%)
-!PREFERENCES_GREY05;Yb=05 CIE L#30
-!PREFERENCES_GREY10;Yb=10 CIE L#40
-!PREFERENCES_GREY15;Yb=15 CIE L#45
-!PREFERENCES_GREY18;Settings in main menu
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREY23;Yb=23 CIE L#55
-!PREFERENCES_GREY30;Yb=30 CIE L#60
-!PREFERENCES_GREY40;Yb=40 CIE L#70
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
!PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram in left panel
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
!PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
!PREFERENCES_HLTHRESHOLD;Threshold for clipped highlights
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
!PREFERENCES_IMPROCPARAMS;Default Processing Profile
!PREFERENCES_INSPECT_LABEL;Inspect
!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
@@ -1233,7 +1208,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
!PREFERENCES_MENUGROUPPROFILEOPERATIONS;Group "Processing profile operations"
!PREFERENCES_MENUGROUPRANK;Group "Rank"
!PREFERENCES_MENUOPTIONS;Context Menu Options
-!PREFERENCES_METADATA;Metadata
!PREFERENCES_MONINTENT;Default rendering intent
!PREFERENCES_MONITOR;Monitor
!PREFERENCES_MONPROFILE_WARNOSX;Due to MacOS limitations, only sRGB is supported.
@@ -1308,9 +1282,7 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
!PREFERENCES_TP_LABEL;Tool panel:
!PREFERENCES_TP_VSCROLLBAR;Hide vertical scrollbar
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
!PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-!PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
!PREFERENCES_WORKFLOW;Layout
!PROFILEPANEL_COPYPPASTE;Parameters to copy
!PROFILEPANEL_GLOBALPROFILES;Bundled profiles
@@ -1507,8 +1479,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
!TP_COLORAPP_SURROUND_DARK;Dark
!TP_COLORAPP_SURROUND_DIM;Dim
!TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
!TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
!TP_COLORAPP_TCMODE_CHROMA;Chroma
!TP_COLORAPP_TCMODE_LABEL1;Curve mode 1
@@ -1599,7 +1569,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
!TP_DEHAZE_STRENGTH;Strength
!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
!TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
@@ -1614,8 +1583,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Preview noise: Mean=%1 High=%2
!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= - High= -
!TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
!TP_DIRPYRDENOISE_LABEL;Noise Reduction
!TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
!TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
@@ -1643,7 +1610,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
!TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
!TP_DIRPYRDENOISE_TYPE_3X3;3×3
!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
!TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1739,8 +1705,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
!TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
!TP_ICM_APPLYLOOKTABLE;Look table
!TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-!TP_ICM_BLENDCMSMATRIX;Blend ICC highlights with matrix
-!TP_ICM_BLENDCMSMATRIX_TOOLTIP;Enable to recover clipped highlights when using LUT-based ICC profiles.
!TP_ICM_BPC;Black Point Compensation
!TP_ICM_DCPILLUMINANT;Illuminant
!TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
@@ -1860,7 +1824,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
!TP_RAWCACORR_CABLUE;Blue
!TP_RAWCACORR_CARED;Red
-!TP_RAWCACORR_CASTR;Strength
!TP_RAWEXPOS_BLACKS;Black Levels
!TP_RAWEXPOS_BLACK_0;Green 1 (lead)
!TP_RAWEXPOS_BLACK_1;Red
@@ -1917,15 +1880,12 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
!TP_RAW_PIXELSHIFTMM_OFF;Off
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -1974,7 +1934,6 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
!TP_RETINEX_GAINTRANSMISSION;Gain transmission
!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
!TP_RETINEX_GAMMA;Gamma
!TP_RETINEX_GAMMA_FREE;Free
!TP_RETINEX_GAMMA_HIGH;High
@@ -2051,10 +2010,8 @@ TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "wh
!TP_SHADOWSHLIGHTS_HIGHLIGHTS;Highlights
!TP_SHADOWSHLIGHTS_HLTONALW;Highlights tonal width
!TP_SHADOWSHLIGHTS_LABEL;Shadows/Highlights
-!TP_SHADOWSHLIGHTS_LOCALCONTR;Local contrast
!TP_SHADOWSHLIGHTS_RADIUS;Radius
!TP_SHADOWSHLIGHTS_SHADOWS;Shadows
-!TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
!TP_SHADOWSHLIGHTS_SHTONALW;Shadows tonal width
!TP_SHARPENEDGE_AMOUNT;Quantity
!TP_SHARPENEDGE_LABEL;Edges
diff --git a/rtdata/languages/English (US) b/rtdata/languages/English (US)
index 47eac5f05..de372a986 100644
--- a/rtdata/languages/English (US)
+++ b/rtdata/languages/English (US)
@@ -100,7 +100,6 @@
!EXPORT_BYPASS_SHARPENEDGE;Bypass Edge Sharpening
!EXPORT_BYPASS_SHARPENING;Bypass Sharpening
!EXPORT_BYPASS_SHARPENMICRO;Bypass Microcontrast
-!EXPORT_BYPASS_SH_HQ;Bypass Sharp Mask Shadows/Highlights
!EXPORT_FASTEXPORTOPTIONS;Fast Export Options
!EXPORT_INSTRUCTIONS;Fast Export options provide overrides to bypass time and resource consuming development settings and to run queue processing using the fast export settings instead. This method is recommended for quicker generation of lower resolution images when speed is a priority or when resized output is desired for one or many images without making modifications to their saved development parameters.
!EXPORT_MAXHEIGHT;Maximum height:
@@ -113,7 +112,6 @@
!EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
!EXTPROGTARGET_1;raw
!EXTPROGTARGET_2;queue-processed
-!FILEBROWSER_ADDDELTEMPLATE;Add/Del templates...
!FILEBROWSER_APPLYPROFILE;Apply
!FILEBROWSER_APPLYPROFILE_PARTIAL;Apply - partial
!FILEBROWSER_AUTODARKFRAME;Auto dark-frame
@@ -1056,7 +1054,6 @@
!PREFERENCES_BEHAVIOR;Behavior
!PREFERENCES_BEHSETALL;All to 'Set'
!PREFERENCES_BEHSETALLHINT;Set all parameters to the Set mode.\nAdjustments of parameters in the batch tool panel will be absolute, the actual values will be displayed.
-!PREFERENCES_BLACKBODY;Tungsten
!PREFERENCES_CACHECLEAR;Clear
!PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
!PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
@@ -1093,11 +1090,6 @@
!PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
!PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
!PREFERENCES_CUSTPROFBUILDPATH;Executable path
-!PREFERENCES_D50;Settings in main menu
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_D55;5500K
-!PREFERENCES_D60;6000K
-!PREFERENCES_D65;6500K
!PREFERENCES_DARKFRAMEFOUND;Found
!PREFERENCES_DARKFRAMESHOTS;shots
!PREFERENCES_DARKFRAMETEMPLATES;templates
@@ -1120,32 +1112,15 @@
!PREFERENCES_FLATFIELDSDIR;Flat-fields directory
!PREFERENCES_FLATFIELDSHOTS;shots
!PREFERENCES_FLATFIELDTEMPLATES;templates
-!PREFERENCES_FLUOF2;Fluorescent F2
-!PREFERENCES_FLUOF7;Fluorescent F7
-!PREFERENCES_FLUOF11;Fluorescent F11
!PREFERENCES_FORIMAGE;For non-raw photos
!PREFERENCES_FORRAW;For raw photos
!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
!PREFERENCES_GIMPPATH;GIMP installation directory
-!PREFERENCES_GREY;Output device's Yb luminance (%)
-!PREFERENCES_GREY05;Yb=05 CIE L#30
-!PREFERENCES_GREY10;Yb=10 CIE L#40
-!PREFERENCES_GREY15;Yb=15 CIE L#45
-!PREFERENCES_GREY18;Settings in main menu
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREY23;Yb=23 CIE L#55
-!PREFERENCES_GREY30;Yb=30 CIE L#60
-!PREFERENCES_GREY40;Yb=40 CIE L#70
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
!PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram in left panel
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
!PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
!PREFERENCES_HLTHRESHOLD;Threshold for clipped highlights
!PREFERENCES_ICCDIR;Directory containing color profiles
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
!PREFERENCES_IMPROCPARAMS;Default Processing Profile
!PREFERENCES_INSPECT_LABEL;Inspect
!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
@@ -1164,7 +1139,6 @@
!PREFERENCES_MENUGROUPPROFILEOPERATIONS;Group "Processing profile operations"
!PREFERENCES_MENUGROUPRANK;Group "Rank"
!PREFERENCES_MENUOPTIONS;Context Menu Options
-!PREFERENCES_METADATA;Metadata
!PREFERENCES_MONINTENT;Default rendering intent
!PREFERENCES_MONITOR;Monitor
!PREFERENCES_MONPROFILE;Default color profile
@@ -1242,9 +1216,7 @@
!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
!PREFERENCES_TP_LABEL;Tool panel:
!PREFERENCES_TP_VSCROLLBAR;Hide vertical scrollbar
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
!PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-!PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
!PREFERENCES_WORKFLOW;Layout
!PROFILEPANEL_COPYPPASTE;Parameters to copy
!PROFILEPANEL_GLOBALPROFILES;Bundled profiles
@@ -1459,8 +1431,6 @@
!TP_COLORAPP_SURROUND_DIM;Dim
!TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
!TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\nAverage: Average light environment (standard). The image will not change.\n\nDim: Dim environment (TV). The image will become slighty dark.\n\nDark: Dark environment (projector). The image will become more dark.\n\nExtremly Dark: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
!TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
!TP_COLORAPP_TCMODE_CHROMA;Chroma
!TP_COLORAPP_TCMODE_COLORF;Colorfulness
@@ -1562,7 +1532,6 @@
!TP_DEHAZE_STRENGTH;Strength
!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
!TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
@@ -1580,8 +1549,6 @@
!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= - High= -
!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2 Ty=%3
!TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
!TP_DIRPYRDENOISE_LABEL;Noise Reduction
!TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
!TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
@@ -1610,7 +1577,6 @@
!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
!TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
!TP_DIRPYRDENOISE_TYPE_3X3;3×3
!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
!TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1715,8 +1681,6 @@
!TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
!TP_ICM_APPLYLOOKTABLE;Look table
!TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-!TP_ICM_BLENDCMSMATRIX;Blend ICC highlights with matrix
-!TP_ICM_BLENDCMSMATRIX_TOOLTIP;Enable to recover clipped highlights when using LUT-based ICC profiles.
!TP_ICM_BPC;Black Point Compensation
!TP_ICM_DCPILLUMINANT;Illuminant
!TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
@@ -1847,7 +1811,6 @@
!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
!TP_RAWCACORR_CABLUE;Blue
!TP_RAWCACORR_CARED;Red
-!TP_RAWCACORR_CASTR;Strength
!TP_RAWEXPOS_BLACKS;Black Levels
!TP_RAWEXPOS_BLACK_0;Green 1 (lead)
!TP_RAWEXPOS_BLACK_1;Red
@@ -1906,15 +1869,12 @@
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
!TP_RAW_PIXELSHIFTMM_OFF;Off
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -1963,7 +1923,6 @@
!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
!TP_RETINEX_GAINTRANSMISSION;Gain transmission
!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
!TP_RETINEX_GAMMA;Gamma
!TP_RETINEX_GAMMA_FREE;Free
!TP_RETINEX_GAMMA_HIGH;High
@@ -2041,10 +2000,8 @@
!TP_SHADOWSHLIGHTS_HIGHLIGHTS;Highlights
!TP_SHADOWSHLIGHTS_HLTONALW;Highlights tonal width
!TP_SHADOWSHLIGHTS_LABEL;Shadows/Highlights
-!TP_SHADOWSHLIGHTS_LOCALCONTR;Local contrast
!TP_SHADOWSHLIGHTS_RADIUS;Radius
!TP_SHADOWSHLIGHTS_SHADOWS;Shadows
-!TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
!TP_SHADOWSHLIGHTS_SHTONALW;Shadows tonal width
!TP_SHARPENEDGE_AMOUNT;Quantity
!TP_SHARPENEDGE_LABEL;Edges
diff --git a/rtdata/languages/Espanol b/rtdata/languages/Espanol
index 00e703ae9..d1f939df8 100644
--- a/rtdata/languages/Espanol
+++ b/rtdata/languages/Espanol
@@ -158,7 +158,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Saltar [raw] Aplicar pasos de mejora LMMSE
EXPORT_BYPASS_SHARPENEDGE;Saltar Enfoque de bordes
EXPORT_BYPASS_SHARPENING;Saltar Enfoque
EXPORT_BYPASS_SHARPENMICRO;Saltar Microcontraste
-EXPORT_BYPASS_SH_HQ;Saltar Máscara de Enfoque Sombras/Luces
EXPORT_FASTEXPORTOPTIONS;Opciones de Exportación Rápida
EXPORT_INSTRUCTIONS;Las opciones de Exportación Rápida proporcionan la posibilidad de saltarse pasos de revelado que consumen mucho tiempo y recursos, ejecutando en su lugar el procesamiento de la cola utilizando los ajustes de Exportación Rápida. Se recomienda este método para generar más rápidamente imágenes de menor resolución: cuando la velocidad es prioritaria, o cuando se desea cambiar el tamaño de una o muchas imágenes de salida sin modificar sus parámetros de revelado.
EXPORT_MAXHEIGHT;Altura máxima:
@@ -171,7 +170,6 @@ EXPORT_USE_FAST_PIPELINE_TIP;Usar un conducto de procesamiento dedicado para las
EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
EXTPROGTARGET_1;Raw
EXTPROGTARGET_2;procesado en cola
-FILEBROWSER_ADDDELTEMPLATE;Añadir/Borrar plantillas...
FILEBROWSER_APPLYPROFILE;Aplicar perfil
FILEBROWSER_APPLYPROFILE_PARTIAL;Aplicar perfil (parcial)
FILEBROWSER_AUTODARKFRAME;Toma Negra automática
@@ -305,7 +303,6 @@ GIMP_PLUGIN_INFO;¡Bienvenido al complemento GIMP de RawTherapee! \nUna vez que
HISTOGRAM_TOOLTIP_B;Mostrar/Ocultar Histograma Azul
HISTOGRAM_TOOLTIP_BAR;Mostrar/Ocultar barra indicadora RGB\nHacer clic con el botón derecho del ratón en la previsualización para congelar/descongelar
HISTOGRAM_TOOLTIP_CHRO;Mostrar/Ocultar Histograma de cromaticidad
-HISTOGRAM_TOOLTIP_FULL;Cambiar entre Histograma completo o escalado
HISTOGRAM_TOOLTIP_G;Mostrar/Ocultar Histograma Verde
HISTOGRAM_TOOLTIP_L;Mostrar/Ocultar Histograma de Luminancia CIELAB
HISTOGRAM_TOOLTIP_MODE;Alterne entre la escala lineal, log-linear y log-log del histograma.
@@ -1108,25 +1105,15 @@ PREFERENCES_APPEARANCE_MAINFONT;Fuente principal
PREFERENCES_APPEARANCE_NAVGUIDECOLOR;Color de la guía del navegador
PREFERENCES_APPEARANCE_THEME;Tema
PREFERENCES_APPLNEXTSTARTUP;requiere reinicio
-PREFERENCES_AUTLISLOW;Bajo
-PREFERENCES_AUTLISMAX;Max - Promedio de todos los mosaicos
-PREFERENCES_AUTLISSTD;Alto
-PREFERENCES_AUTLISVLOW;Ninguno
-PREFERENCES_AUTLOW;Bajo
PREFERENCES_AUTOMONPROFILE;Usar perfil de color del monitor principal en el sistema operativo
PREFERENCES_AUTOSAVE_TP_OPEN;Guardar automáticamente las herramientas contraídas/expandidas \nEstado antes de salir
-PREFERENCES_AUTSTD;Estandar
PREFERENCES_BATCH_PROCESSING;Procesamiento por lotes
PREFERENCES_BEHADDALL;Todo para 'Agregar'
PREFERENCES_BEHADDALLHINT;Establezca todos los parámetros del modo Agregar.\nLos ajustes de parámetros en el panel de la herramienta de lotes serán deltas de los valores guardados
PREFERENCES_BEHAVIOR;Comportamiento
PREFERENCES_BEHSETALL;Todo para 'Establecer'
PREFERENCES_BEHSETALLHINT;Todos los parámetros para el modo Establecer.\nLos ajustes de parámetros en el panel de la herramienta de lotes serán serán absolutos, se mostrarán los valores vigentes
-PREFERENCES_BLACKBODY;Tungsteno
PREFERENCES_CACHECLEAR;Borrar
-PREFERENCES_CACHECLEARALL;Borrar todo
-PREFERENCES_CACHECLEARPROFILES;Borrar perfiles
-PREFERENCES_CACHECLEARTHUMBS;Borrar miniaturas
PREFERENCES_CACHECLEAR_ALL;Borrar todos los archivos en caché:
PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Borre todos los archivos en caché excepto los perfiles de procesamiento en caché:
PREFERENCES_CACHECLEAR_ONLYPROFILES;Borrar solo los perfiles de procesamiento en caché:
@@ -1134,10 +1121,6 @@ PREFERENCES_CACHECLEAR_SAFETY;Sólo se borran los archivos en el caché. Los per
PREFERENCES_CACHEMAXENTRIES;Cantidad máxima de entradas en la memoria intermedia
PREFERENCES_CACHEOPTS;Opciones de memoria intermedia
PREFERENCES_CACHETHUMBHEIGHT;Altura máxima de las miniaturas
-PREFERENCES_CIEART;Optimización CIECAM02
-PREFERENCES_CIEART_FRAME;Configuración específica de CIECAM02
-PREFERENCES_CIEART_LABEL;Usar precisión flotante simple en lugar de doble.
-PREFERENCES_CIEART_TOOLTIP;Si se habilita, los cálculos CIECAM02 se realizan con precisión flotante simple en lugar de doble. Esto provee un pequeño aumento en la velocidad de cálculo a expensas de una casi imperceptible pérdida de calidad
PREFERENCES_CLIPPINGIND;Indicación de recortes
PREFERENCES_CLUTSCACHE;HaldCLUT Cache
PREFERENCES_CLUTSCACHE_LABEL;Número máximo de CLUTs en caché
@@ -1160,19 +1143,11 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Clave de formato
PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Nombre
PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;ID Etiqueta
PREFERENCES_CUSTPROFBUILDPATH;Ruta al programa ejecutable
-PREFERENCES_CUTOVERLAYBRUSH;Recortar máscara de color/transparencia
-PREFERENCES_D50;5000°K
-PREFERENCES_D50_OLD;5000°K
-PREFERENCES_D55;5500°K
-PREFERENCES_D60;6000°K
-PREFERENCES_D65;6500°K
PREFERENCES_DARKFRAMEFOUND;Encontrado
PREFERENCES_DARKFRAMESHOTS;disparos
PREFERENCES_DARKFRAMETEMPLATES;plantillas
PREFERENCES_DATEFORMAT;Formato de fecha
PREFERENCES_DATEFORMATHINT;Puede usar las siguientes variables :\n%y : año\n%m : mes\n%d : dia\n\nPor ejemplo, la fecha en formato Húngaro es: \n%y/%m/%d
-PREFERENCES_DAUB_LABEL;Use las wavelets D6 de Daubechies en lugar de D4
-PREFERENCES_DAUB_TOOLTIP;Las herramientas de reducción de ruido y niveles de wavelet utilizan una wavelet madre de Debauchies. Si elige D6 en lugar de D4, aumenta el número de coeficientes de Daubechies ortogonales y probablemente aumenta la calidad de los niveles de pequeña escala. \nNo hay diferencia entre los dos, en el uso de memoria o de tiempo de procesamiento.
PREFERENCES_DIRDARKFRAMES;Carpeta con las Tomas Negras
PREFERENCES_DIRECTORIES;Directorios
PREFERENCES_DIRHOME;Carpeta de usuario
@@ -1182,7 +1157,6 @@ PREFERENCES_DIRSELECTDLG;Seleccionar carpeta de imágenes en el arranque...
PREFERENCES_DIRSOFTWARE;Carpeta de instalación
PREFERENCES_EDITORCMDLINE;Línea de comando personalizada
PREFERENCES_EDITORLAYOUT;Disposición del editor
-PREFERENCES_EXPAUT;Experto
PREFERENCES_EXTERNALEDITOR;Editor externo
PREFERENCES_FBROWSEROPTS;Opciones del explorador de archivos/Miniaturas
PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Barra de herramientas del explorador en una sola fila (deseleccionar para pantallas de baja resolución)
@@ -1191,32 +1165,15 @@ PREFERENCES_FLATFIELDFOUND;Encontrado
PREFERENCES_FLATFIELDSDIR;Carpeta de archivos de campo plano
PREFERENCES_FLATFIELDSHOTS;disparos
PREFERENCES_FLATFIELDTEMPLATES;plantillas
-PREFERENCES_FLUOF2;Fluorescente F2
-PREFERENCES_FLUOF7;Fluorescente F7
-PREFERENCES_FLUOF11;Fluorescente F11
PREFERENCES_FORIMAGE;Para fotos de tipo diferente a raw
PREFERENCES_FORRAW;Para fotos Raw
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;La misma altura en miniatura entre la tira de película y el explorador de archivos
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Tener un tamaño separado,en las miniaturas, requerirá más tiempo de procesamiento cada vez que alterne entre la única pestaña Editor y el Explorador de archivos.
PREFERENCES_GIMPPATH;Carpeta de instalación de GIMP
-PREFERENCES_GREY;Luminancia (%) Yb del dispositivo de salida
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;Escena Yb luminancia (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;Automático
PREFERENCES_HISTOGRAMPOSITIONLEFT;Histograma en panel izquierdo
-PREFERENCES_HISTOGRAMWORKING;Usar perfil de trabajo para el histograma principal y el navegador
PREFERENCES_HISTOGRAM_TOOLTIP;Si está activado, el perfil de trabajo se utiliza para renderizar el histograma principal y el panel navegador, de lo contrario se utiliza el perfil de Gamma de la Corrección de salida.
PREFERENCES_HLTHRESHOLD;Umbral de luces altas cortadas
PREFERENCES_ICCDIR;Carpeta con perfiles de color ICC
-PREFERENCES_IMG_RELOAD_NEEDED;Estos cambios requieren que la imagen se vuelva a cargar (o que se abra una nueva imagen) para que tenga efecto.
PREFERENCES_IMPROCPARAMS;Parámetros de procesamiento de imágenes predeterminados
PREFERENCES_INSPECT_LABEL;Inspeccionar
PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Número máximo de imágenes en caché
@@ -1228,28 +1185,21 @@ PREFERENCES_INTENT_SATURATION;Saturación
PREFERENCES_INTERNALTHUMBIFUNTOUCHED;Mostrar miniatura JPEG incrustada si foto Raw no se ha editado
PREFERENCES_LANG;Idioma
PREFERENCES_LANGAUTODETECT;Usar idioma del sistema
-PREFERENCES_LEVAUTDN;Nivel de supresión de ruido
-PREFERENCES_LEVDN;Tamaño de celda
-PREFERENCES_LISS;Suavizado automático multizona
PREFERENCES_MAX;Maxi (baldoza)
PREFERENCES_MAXRECENTFOLDERS;Número máximo de carpetas recientes
-PREFERENCES_MED;Medio(Tile/2)
PREFERENCES_MENUGROUPEXTPROGS;Grupo "Abrir con"
PREFERENCES_MENUGROUPFILEOPERATIONS;Grupo "Operaciones de archivo"
PREFERENCES_MENUGROUPLABEL;Grupo "Etiquetado con color"
PREFERENCES_MENUGROUPPROFILEOPERATIONS;Grupo "Operaciones de Perfil de Procesamiento"
PREFERENCES_MENUGROUPRANK;Grupo "Asignar Rango"
PREFERENCES_MENUOPTIONS;Opciones de menú de contexto
-PREFERENCES_METADATA;Metadatos
PREFERENCES_MONINTENT;Intento de representación predeterminado
PREFERENCES_MONITOR;Monitor
PREFERENCES_MONPROFILE;Perfil de color predeterminado
PREFERENCES_MONPROFILE_WARNOSX;Debido a las limitaciones de MacOS, solo se admite sRGB.
PREFERENCES_MULTITAB;Modo Editor de varias pestañas
PREFERENCES_MULTITABDUALMON;Modo Editor de varias pestañas, si está disponible en segundo monitor
-PREFERENCES_NAVGUIDEBRUSH;Color de la guía del navegador
PREFERENCES_NAVIGATIONFRAME;Navegación
-PREFERENCES_NOISE;Reducción de ruido
PREFERENCES_OUTDIR;Carpeta de salida
PREFERENCES_OUTDIRFOLDER;Guardar en carpeta
PREFERENCES_OUTDIRFOLDERHINT;Guardar las imágenes creadas en una carpeta elegida
@@ -1287,13 +1237,8 @@ PREFERENCES_PRTPROFILE;Perfil de color
PREFERENCES_PSPATH;Carpeta de instalación de Adobe Photoshop
PREFERENCES_REMEMBERZOOMPAN;Recuerde el % de zoom y el desplazamiento del paneo
PREFERENCES_REMEMBERZOOMPAN_TOOLTIP;Recuerde que el% de zoom y el desplazamiento de la panorámica de la imagen actual al abrir una nueva imagen. \nEsta opción solo funciona en el "Modo de pestaña Editor único" y cuando el "Método de demostración utilizado para la vista previa a <100% de zoom" está configurado en " Como en PP3 "
-PREFERENCES_RGBDTL_LABEL;Número máximo de hilos para reducción de ruido
-PREFERENCES_RGBDTL_TOOLTIP;La Reducción de Ruido requiere como base 128MB de RAM para una imagen de 10MPix o 512MB para una imagen de 40MPix; más 128MB RAM por hilo de proceso.\nMientras más hilos corren en paralelo, más rápido es el procesamiento. Coloque “0” para que automáticamente se use tantos hilos como sea posible según la capacidad de su equipo.
PREFERENCES_SAVE_TP_OPEN_NOW;Guardar herramientas colapsadas/expandidas ahora
-PREFERENCES_SELECTFONT;Seleccionar fuente
-PREFERENCES_SELECTFONT_COLPICKER;Seleccione la fuente del Selector de color
PREFERENCES_SELECTLANG;Seleccionar idioma
-PREFERENCES_SELECTTHEME;Seleccionar tema
PREFERENCES_SERIALIZE_TIFF_READ;Configuración de lectura Tiff
PREFERENCES_SERIALIZE_TIFF_READ_LABEL;Serializar la lectura de archivos tiff
PREFERENCES_SERIALIZE_TIFF_READ_TOOLTIP;Cuando trabaje con carpetas llenas de archivos tiff sin comprimir, habilitar esta opción puede aumentar el rendimiento en la generación de la miniatura.
@@ -1303,17 +1248,13 @@ PREFERENCES_SHOWDATETIME;Mostrar fecha y hora
PREFERENCES_SHOWEXPOSURECOMPENSATION;Mostrar compensación de exposición
PREFERENCES_SHOWFILMSTRIPTOOLBAR;Mostrar barra de herramientas estilo tira de película
PREFERENCES_SHTHRESHOLD;Umbral de sombras cortadas
-PREFERENCES_SIMPLAUT;Modo de herramienta
PREFERENCES_SINGLETAB;Modo Editor de pestaña única
PREFERENCES_SINGLETABVERTAB;Modo Editor de pestaña única, pestañas verticales
-PREFERENCES_SMA;A una escala pequeña(250x287)
PREFERENCES_SND_BATCHQUEUEDONE;Trabajos en cola finalizados
PREFERENCES_SND_HELP;Introducir el path o dejar en blanco (sin sonido). En Windows, usar "SystemDefault", "SystemAsterisk" etc. para los sonidos del sistema\nEn Linux use "complete", "window-attention" etc. para los sonidos del sistema.
PREFERENCES_SND_LNGEDITPROCDONE;Procesado del editor terminado
PREFERENCES_SND_THRESHOLDSECS;Despues de segundos
-PREFERENCES_SND_TRESHOLDSECS;después de seg.
PREFERENCES_STARTUPIMDIR;Carpeta de imágenes en el arranque
-PREFERENCES_STDAUT;Estándar
PREFERENCES_TAB_BROWSER;Explorador de archivos
PREFERENCES_TAB_COLORMGR;Gestión del color
PREFERENCES_TAB_DYNAMICPROFILE;Reglas de perfil dinámico
@@ -1321,24 +1262,13 @@ PREFERENCES_TAB_GENERAL;General
PREFERENCES_TAB_IMPROC;Procesamiento de imágenes
PREFERENCES_TAB_PERFORMANCE;Rendimiento
PREFERENCES_TAB_SOUND;Sonidos
-PREFERENCES_THEME;Tema
PREFERENCES_THUMBNAIL_INSPECTOR_JPEG;Vista previa de JPEG incrustado
PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Imagen para mostrar
PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Representación (Render) Raw neutral
PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;JPEG incrustado si es de tamaño completo, de lo contrario es neutral sin formato
-PREFERENCES_TIMAX;Alto
-PREFERENCES_TINB;Número de mosaicos
-PREFERENCES_TISTD;Estándar
PREFERENCES_TP_LABEL;Panel de herramientas:
-PREFERENCES_TP_USEICONORTEXT;Usar iconos de pestaña en lugar de texto
PREFERENCES_TP_VSCROLLBAR;Ocultar barra de desplazamiento vertical del panel de herramientas
-PREFERENCES_TUNNELMETADATA;Copie Exif / IPTC / XMP sin cambios en el archivo de salida
PREFERENCES_USEBUNDLEDPROFILES;Usar perfiles empaquetados
-PREFERENCES_VIEW;Balance de blancos en el dispositivo de salida (monitor, TV, proyector...)
-PREFERENCES_WAVLEV;Aumentar el nivel de wavelet en calidad 'alta'
-PREFERENCES_WLONE;Un nivel
-PREFERENCES_WLTWO;Dos niveles
-PREFERENCES_WLZER;No
PREFERENCES_WORKFLOW;Disposición
PROFILEPANEL_COPYPPASTE;Parámetros a copiar
PROFILEPANEL_GLOBALPROFILES;Perfiles empaquetados
@@ -1391,7 +1321,6 @@ SAVEDLG_FILEFORMAT;Formato de archivo
SAVEDLG_FILEFORMAT_FLOAT; punto flotante
SAVEDLG_FORCEFORMATOPTS;Opciones de guardar forzado
SAVEDLG_JPEGQUAL;Calidad JPEG
-SAVEDLG_PNGCOMPR;Compresión PNG
SAVEDLG_PUTTOQUEUE;Poner en la cola de procesamiento
SAVEDLG_PUTTOQUEUEHEAD;Poner al principio de la cola de procesamiento
SAVEDLG_PUTTOQUEUETAIL;Poner al final de la cola de procesamiento
@@ -1424,7 +1353,6 @@ TP_BWMIX_ALGO_LI;Lineal
TP_BWMIX_ALGO_SP;Efectos especiales
TP_BWMIX_ALGO_TOOLTIP;Lineal: producirá una respuesta lineal normal.\nEfectos especiales: producirá efectos especiales por mezclar no linealmente los canales.
TP_BWMIX_AUTOCH;Auto
-TP_BWMIX_AUTOCH_TIP;Calcular valores óptimos para el Mezclador de Canales
TP_BWMIX_CC_ENABLED;Ajustar color complementario
TP_BWMIX_CC_TOOLTIP;Permite el ajuste automático de colores complementarios en modo RNAmVCAzPM
TP_BWMIX_CHANNEL;Ecualizador de luminancia
@@ -1453,7 +1381,6 @@ TP_BWMIX_MET_DESAT;Des-saturación
TP_BWMIX_MET_LUMEQUAL;Ecualizador de Luminancia
TP_BWMIX_MIXC;Mezclador
TP_BWMIX_NEUTRAL;Restablece el mezclador
-TP_BWMIX_NEUTRAL_TIP;Restablece todos los parámetros (filtro, mezclador de canales) a sus valores predeterminados.
TP_BWMIX_RGBLABEL;R: %1%% V: %2%% A: %3%% Total: %4%%
TP_BWMIX_RGBLABEL_HINT;Factores finales RGB tomando en cuenta todas las opciones del mezclador\nTotal muestra la suma de los valores RGB actualmente aplicados:\n- En modo relativo Siempre 100% \n- En modo absoluto mayor (más claro) o menor (más oscuro) que 100%
TP_BWMIX_RGB_TOOLTIP;Mezcla de canales RGB. Use como guía valores pre-establecidos.\nTenga en cuenta que valores negativos pueden introducir elementos extraños (artifacts) o resultados erráticos.
@@ -1496,11 +1423,6 @@ TP_COARSETRAF_TOOLTIP_ROTLEFT;Rotar a la izquierda.\nTecla de Atajo: ']'
TP_COARSETRAF_TOOLTIP_ROTRIGHT;Rotar a la derecha
TP_COARSETRAF_TOOLTIP_VFLIP;Voltear verticalmente
TP_COLORAPP_ABSOLUTELUMINANCE;Luminancia absoluta
-TP_COLORAPP_ADAPTSCENE;Adaptación a la luminosidad de la escena
-TP_COLORAPP_ADAPTSCENE_TOOLTIP;Luminancia absoluta del entorno de la escena (cd/m²).\n1) Calculado en base a datos Exif: \nTiempo de Exposición - Velocidad ISO - Número F de apertura - Corrección de exposición\n2) Calculado a partir del Punto Blanco raw y Compensación de Exposición RT.
-TP_COLORAPP_ADAPTVIEWING;Luminosidad de visualización (cd/m²)
-TP_COLORAPP_ADAPTVIEWING_TOOLTIP;Luminancia absoluta del entorno de visualización\n(usualmente 16cd/m²)
-TP_COLORAPP_ADAP_AUTO_TOOLTIP;Si la casilla está seleccionada (como se recomienda) RT calcula el valor óptimo a partir de los datos Exif.\nPara establecer el valor manualmente, primero desmarque la casilla
TP_COLORAPP_ALGO;Algoritmo
TP_COLORAPP_ALGO_ALL;Todo
TP_COLORAPP_ALGO_JC;Claridad + Crominancia (JC)
@@ -1531,8 +1453,6 @@ TP_COLORAPP_CURVEEDITOR3;Curva de color
TP_COLORAPP_CURVEEDITOR3_TOOLTIP;Ajusta Crominancia, Saturación o Colorido.\n\nMuestra el histograma de Cromaticidad (Lab) antes de los ajustes CIECAM02.\nSi la casilla "Muestra en las curvas histogramas de salida CIECAM02" está seleccionada, muestra el histograma de C, s o M después de CIECAM02.\n\nC, s y M no se muestran en el histograma del panel principal.\n\nVea el histograma de salida final en el panel principal
TP_COLORAPP_DATACIE;Curvas con histogramas de salida CIECAM02
TP_COLORAPP_DATACIE_TOOLTIP;Si está seleccionada, los histogramas en las curvas CIECAM02 muestran aproximadamente valores/rangos de J o Q, y C, s o M después de los ajustes CIECAM02.\nEsta selección no influye en el histograma del panel principal.\n\nCuando no está seleccionada, los histogramas en las curvas CIECAM02 muestran valores Lab antes de los ajustes CIECAM02
-TP_COLORAPP_DEGREE_AUTO_TOOLTIP;Si la casilla está seleccionada (como se recomienda), RT calcula el valor óptimo, que es usado por CAT02, y también por todo CIECAM02.\nPara establecer manualmente el valor, primero desmarque la casilla (se recomienda usar valores mayores a 65)
-TP_COLORAPP_DEGREE_TOOLTIP;Cantidad de transformación de adaptación cromática CIE 2002
TP_COLORAPP_FREE;Libre tempera+verde + CAT02 + [output]
TP_COLORAPP_GAMUT;Control de Gamut (Lab)
TP_COLORAPP_GAMUT_TOOLTIP;Permite control de gamut en modo Lab
@@ -1551,16 +1471,12 @@ TP_COLORAPP_NEUTRAL;Restablecer
TP_COLORAPP_NEUTRAL_TIP;Restablecer todos los controles deslizantes y las curvas a sus valores predeterminados
TP_COLORAPP_RSTPRO; Protección de tonos rojos y color piel
TP_COLORAPP_RSTPRO_TOOLTIP;Intensidad de protección de tonos rojos y color piel (en curvas y en controles deslizantes)
-TP_COLORAPP_SHARPCIE;Enfoque, Contraste por niveles de detalle, Micro-contraste & Eliminación de AC con Q/C
-TP_COLORAPP_SHARPCIE_TOOLTIP;Si se selecciona, Enfoque, Contraste por niveles de detalle, Micro-contraste & Eliminación de AC usarán CIECAM02
TP_COLORAPP_SURROUND;Entorno
TP_COLORAPP_SURROUND_AVER;Promedio
TP_COLORAPP_SURROUND_DARK;Oscuro
TP_COLORAPP_SURROUND_DIM;Luz Tenue
TP_COLORAPP_SURROUND_EXDARK;Muy oscuro
TP_COLORAPP_SURROUND_TOOLTIP;Cambia la tonalidad y color de la imagen teniendo en cuenta las condiciones de visualización en el dispositivo de salida\n\nPromedio:\nEntorno con iluminación media(estándar)\nLa imagen no cambiará\n\n\n\nLuz Tenue:\nAmbiente a media luz (TV)\nLa imagen se pondrá ligeramente oscura\n\nOscuro:\nEntorno oscuro (proyector)\nLa imagen se pondrá más oscura\n\nMuy Oscuro:\nEntorno extremadamente oscuro\nLa imagen se podrá bien oscura
-TP_COLORAPP_SURSOURCE;Entorno oscuro
-TP_COLORAPP_SURSOURCE_TOOLTIP;Puede usarse si la imagen original tiene borde oscuro.
TP_COLORAPP_TCMODE_BRIGHTNESS;Brillo
TP_COLORAPP_TCMODE_CHROMA;Crominancia
TP_COLORAPP_TCMODE_COLORF;Colorido
@@ -1575,9 +1491,6 @@ TP_COLORAPP_TONECIE_TOOLTIP;Si esta opción no está seleccionada, el mapeo tona
TP_COLORAPP_VIEWING_ABSOLUTELUMINANCE_TOOLTIP;Luminancia absoluta del entorno de visualización \ n (normalmente 16 cd / m²).
TP_COLORAPP_WBCAM;BalBlanco [RT+CAT02] + [salida]
TP_COLORAPP_WBRT;BalBlanco [RT] + [salida]
-TP_COLORAPP_YB;Yb% (luminancia media)
-TP_COLORAPP_YBSCENE;Yb% (luminancia media)
-TP_COLORAPP_YBSCENE_TOOLTIP;Si está habilitado el modo automático, Yb se calcula a partir del valor medio de la luminancia de la imagen real
TP_COLORTONING_AB;o C/L
TP_COLORTONING_AUTOSAT;Automático
TP_COLORTONING_BALANCE;Balance
@@ -1664,7 +1577,6 @@ TP_DEHAZE_SHOW_DEPTH_MAP;Mostrar mapa de profundidad
TP_DEHAZE_STRENGTH;Fuerza
TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Control automático de multi-zonas
TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Control automático global
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Trate de evaluar el ruido del color \nTenga cuidado, este cálculo es promedio y es bastante subjetivo.
TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Crominancia: Azul-Amarillo
TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Curva de Crominancia
TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Aumente (multiplique) el valor de todos los controles deslizantes de crominancia. \nEsta curva le permite ajustar la intensidad de la reducción de ruido cromático en función de la cromaticidad, por ejemplo, para aumentar la acción en áreas de baja saturación y para disminuirla en aquellas de alta saturación.
@@ -1682,8 +1594,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Previsualización de ruido: Media
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Previsualización del ruido: Media = - Alta = -
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tamaño del mosaico =% 1, Centro: Tx =% 2 Ty =% 3
TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Crominancia: Rojo-Verde
-TP_DIRPYRDENOISE_ENH;Modo mejorado
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Incrementa la calidad de la Reducción de Ruido a costa de un incremento de 20% en el tiempo de procesamiento
TP_DIRPYRDENOISE_LABEL;Reducción del ruido
TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Control de luminancia
TP_DIRPYRDENOISE_LUMINANCE_CURVE;Curva de Luminancia
@@ -1692,7 +1602,6 @@ TP_DIRPYRDENOISE_LUMINANCE_FRAME;Luminancia
TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminancia
TP_DIRPYRDENOISE_MAIN_COLORSPACE;Método
TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;L*a*b*
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_LABEL;Reducción de ruido
TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;Para imágenes raw puede usar tanto el método RGB como el Lab.\n\nPara imágenes no raw el método Lab será usado de todas maneras, ignorando el método seleccionado.
TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
@@ -1713,7 +1622,6 @@ TP_DIRPYRDENOISE_MEDIAN_PASSES;Iteracciones Median
TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;La aplicación de tres iteraciones de filtro de mediana con un tamaño de ventana de 3 × 3 a menudo conduce a mejores resultados que el uso de una iteración de filtro de mediana con un tamaño de ventana de 7 × 7.
TP_DIRPYRDENOISE_MEDIAN_TYPE;Tipo Median
TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Aplica un filtro de mediana para el tamaño de la ventana deseada. Cuanto mayor sea el tamaño de la ventana, más tiempo tardará. \n3 × 3 soft: trata 5 píxeles en una ventana de 3 × 3 píxeles. \n3 × 3: trata 9 píxeles en una ventana de 3 × 3 píxeles. \n5 × 5 suave: trata 13 píxeles en una ventana de 5 × 5 píxeles. \n5 × 5: trata 25 píxeles en una ventana de 5 × 5 píxeles. \n7 × 7: trata 49 píxeles en una ventana de 7 × 7 píxeles. \n9 × 9: trata 81 píxeles en una ventana de 9 × 9 píxeles. \nA veces es posible lograr una mayor calidad ejecutando varias iteraciones con un tamaño de ventana más pequeño que una iteración con una más grande.
-TP_DIRPYRDENOISE_SLI;Deslizador
TP_DIRPYRDENOISE_TYPE_3X3;3×3
TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 suavisado
TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1787,10 +1695,6 @@ TP_FLATFIELD_BT_VERTICAL;Vertical
TP_FLATFIELD_CLIPCONTROL;Control de Recorte
TP_FLATFIELD_CLIPCONTROL_TOOLTIP;El Control de Recorte evita la perdida de detalle en las luces altas causadas por la aplicación del Campo Plano. Si ya hubiera perdida de detalle en las altas luces antes de aplicar el Campo Plano, el Control de Recorte puede conducir a una dominante de color.
TP_FLATFIELD_LABEL;Campo plano
-TP_GAMMA_CURV;Gamma
-TP_GAMMA_FREE;Gamma libre
-TP_GAMMA_OUTPUT;Gamma de salida
-TP_GAMMA_SLOP;Pendiente (lineal)
TP_GENERAL_11SCALE_TOOLTIP;El efecto de esta herramienta o el de alguno de sus componentes solo es apreciable en escala de vista previa 1:1
TP_GRADIENT_CENTER;Centro
TP_GRADIENT_CENTER_X;Centro X
@@ -1822,8 +1726,6 @@ TP_ICM_APPLYHUESATMAP;Tabla base
TP_ICM_APPLYHUESATMAP_TOOLTIP;Emplear la tabla base DCP incrustada (Mapa Hue Sat). La configuración solo está disponible si el DCP seleccionado tiene unoloy the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
TP_ICM_APPLYLOOKTABLE;Revisar tabla
TP_ICM_APPLYLOOKTABLE_TOOLTIP;Emplear la tabla de apariencia DCP incrustada. La configuración solo está disponible si el DCP seleccionado tiene uno.
-TP_ICM_BLENDCMSMATRIX;Mezclar las luces altas ICC con matriz
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Permite recuperar luces altas quemadas cuando se usan perfiles ICC basados en LUT
TP_ICM_BPC;Compensación de punto negro
TP_ICM_DCPILLUMINANT;Iluminante
TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolado
@@ -1902,9 +1804,6 @@ TP_LENSGEOM_LABEL;Lente / Geometría
TP_LENSPROFILE_CORRECTION_LCPFILE;LCP archivo
TP_LENSPROFILE_LABEL;Perfil de corrección de lente
TP_LENSPROFILE_LENS_WARNING;Advertencia: el factor de recorte utilizado para el perfilado de la lente es mayor que el factor de recorte de la cámara, los resultados pueden ser incorrectos.
-TP_LENSPROFILE_USECA;Corrección de AC
-TP_LENSPROFILE_USEDIST;Corrección de distorsión
-TP_LENSPROFILE_USEVIGN;Corrección de viñeteo
TP_LENSPROFILE_USE_CA;Aberración cromática
TP_LENSPROFILE_USE_VIGNETTING;Viñeteado
TP_LOCALCONTRAST_AMOUNT;Cantidad
@@ -1952,7 +1851,6 @@ TP_RAWCACORR_AUTOIT_TOOLTIP;Esta configuración está disponible si se marca "Co
TP_RAWCACORR_AVOIDCOLORSHIFT;Evitar el cambio de color
TP_RAWCACORR_CABLUE;Azul
TP_RAWCACORR_CARED;Rojo
-TP_RAWCACORR_CASTR;Fuerza
TP_RAWEXPOS_BLACKS;Niveles de negro
TP_RAWEXPOS_BLACK_0;Verde 1 (principal)
TP_RAWEXPOS_BLACK_1;Rojo
@@ -1999,7 +1897,6 @@ TP_RAW_LMMSE_TOOLTIP;Agregar gamma (paso 1)\n Agregar mediana (pasos 2,3,4)\nAgr
TP_RAW_MONO;Mono
TP_RAW_NONE;Ninguno (muestra el patrón del sensor)
TP_RAW_PIXELSHIFT;Cambio de píxel
-TP_RAW_PIXELSHIFTADAPTIVE;Detección adaptativa
TP_RAW_PIXELSHIFTBLUR;Máscara de movimiento de desenfoque
TP_RAW_PIXELSHIFTDMETHOD;Demosaicado, método para el movimiento
TP_RAW_PIXELSHIFTEPERISO;ISO adaptación
@@ -2008,34 +1905,17 @@ TP_RAW_PIXELSHIFTEQUALBRIGHT;Ecualiza el brillo de los cuadros.
TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Igualar por canal
TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Activado: ecualice los canales RGB individualmente. \nDeshabilitado: use el mismo factor de ecualización para todos los canales.
TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Ecualice el brillo de los cuadros con el brillo del cuadro seleccionado. \nSi hay áreas sobreexpuestas en los cuadros, seleccione el cuadro más brillante para evitar la aparición de colores magenta en áreas sobreexpuestas o habilite la corrección de movimiento.
-TP_RAW_PIXELSHIFTEXP0;Experimental
TP_RAW_PIXELSHIFTGREEN;Compruebe el canal verde para el movimiento
TP_RAW_PIXELSHIFTHOLEFILL;Rellene los fallos en la máscara de movimiento
TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Rellene los fallos en la máscara de movimiento
-TP_RAW_PIXELSHIFTLMMSE;Utilice LMMSE para regiones móviles
-TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE en lugar de AMaZE para las áreas de movimiento. \nÚtil para imágenes de alta ISO.
-TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 nuevo umbral
TP_RAW_PIXELSHIFTMEDIAN;Usa la mediana pa3x3 nuevo umbral parara las regiones móviles.
-TP_RAW_PIXELSHIFTMEDIAN3;Excluir el cuadro seleccionado de la mediana
-TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Excluye el cuadro seleccionado de la mediana. \nUtilícelo si los objetos en movimiento se superponen en el cuadro 2 y 3
TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use la mediana de todos los cuadros en lugar del cuadro seleccionado para las regiones con movimiento. \nElimina los objetos que se encuentran en diferentes lugares en todos los cuadros. \nBrinda efecto de movimiento en objetos de movimiento lento (superpuestos).
TP_RAW_PIXELSHIFTMM_AUTO;Automático
TP_RAW_PIXELSHIFTMM_CUSTOM;Personalizado
TP_RAW_PIXELSHIFTMM_OFF;Apagado
TP_RAW_PIXELSHIFTMOTION;Nivel de detección de movimiento (en desuso)
-TP_RAW_PIXELSHIFTMOTIONCORRECTION;Magnitudo de la corrección del movimiento verde
TP_RAW_PIXELSHIFTMOTIONMETHOD;Corrección del movimiento
-TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 significa que no hay detección de movimiento. \n1 - 99 significa que el movimiento se detectará de acuerdo con este valor. Aumente el valor para aumentar la tasa de detección. \n100 significa que se utilizará el marco de demostración AMaZE.ción de movimiento. \n1 - 99 significa que el movimiento se detectará de acuerdo con este valor. Aumente el valor para aumentar la tasa de detección. \n100 significa que se utilizará el marco de demostración AMaZE.no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
-TP_RAW_PIXELSHIFTNONGREENAMAZE;Compruebe AMaZE rojo / azul
TP_RAW_PIXELSHIFTNONGREENCROSS;Compruebe los canales rojos/azules para el movimiento
-TP_RAW_PIXELSHIFTNONGREENCROSS2;Compruebe verde AMaZE
-TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Compruebe rojo/azul horizontal
-TP_RAW_PIXELSHIFTNONGREENVERTICAL;Compruebe rojo/azul vertical
-TP_RAW_PIXELSHIFTNREADISO;nLeer
-TP_RAW_PIXELSHIFTONEGREEN;Utilice un verde en lugar de media
-TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Use un verde en lugar de promediar dos verdes para regiones sin movimiento.
-TP_RAW_PIXELSHIFTPRNU;PRNU (%)
-TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Fuerza Rojo&Azul
TP_RAW_PIXELSHIFTSHOWMOTION;Mostrar máscara de movimiento
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Mostrar solo máscara de movimiento
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Muestra la máscara de movimiento sin la imagen.
@@ -2044,9 +1924,6 @@ TP_RAW_PIXELSHIFTSIGMA;Radio de desenfoque
TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;El radio predeterminado de 1.0 por lo general se ajusta bien a la base ISO. \nAumente el valor para tomas con ISO alto, 5.0 es un buen punto de partida. \nMire la máscara de movimiento mientras cambia el valor.
TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Transiciones suaves entre áreas con movimiento y áreas sin movimiento. \nConfigure en 0 para deshabilitar el suavizado en la transición. \nConfigure en 1 para obtener el resultado AMaZE / LMMSE del marco seleccionado (dependiendo de si se selecciona "Usar LMMSE") o la mediana de los cuatro cuadros si se selecciona "Usar mediana".
-TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;Factor de StdDev Azul
-TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;Factor de StdDev Verde
-TP_RAW_PIXELSHIFTSTDDEVFACTORRED;Factor de StdDev Rojo
TP_RAW_RCD;RCD
TP_RAW_RCDVNG4;RCD+VNG4
TP_RAW_SENSOR_BAYER_LABEL;Sensor con matriz Bayer
@@ -2084,7 +1961,6 @@ TP_RETINEX_GAIN;Aumentar
TP_RETINEX_GAINOFFS;Aumentar y Offset (brillo)
TP_RETINEX_GAINTRANSMISSION;Aumentar transmisión
TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplifique o reduzca el mapa de transmisión para lograr la luminancia. \nAbscisa: transmisión -min desde 0, media y valores (máx.). \nOrdena: ganancia.
-TP_RETINEX_GAIN_TOOLTIP;Actúa sobre la imagen restaurada. \nÉsta es muy diferente de las otras configuraciones. Se utiliza para píxeles blancos o negros, y para ayudar a equilibrar el histograma.
TP_RETINEX_GAMMA;Gamma
TP_RETINEX_GAMMA_FREE;Libre
TP_RETINEX_GAMMA_HIGH;Alta
@@ -2162,10 +2038,8 @@ TP_SAVEDIALOG_OK_TIP;Tecla de Atajo Ctrl-Enter
TP_SHADOWSHLIGHTS_HIGHLIGHTS;Luces altas
TP_SHADOWSHLIGHTS_HLTONALW;Ancho tonal de Luces Altas
TP_SHADOWSHLIGHTS_LABEL;Sombras/Luces altas
-TP_SHADOWSHLIGHTS_LOCALCONTR;Contraste local
TP_SHADOWSHLIGHTS_RADIUS;Radio
TP_SHADOWSHLIGHTS_SHADOWS;Sombras
-TP_SHADOWSHLIGHTS_SHARPMASK;Máscara de enfoque
TP_SHADOWSHLIGHTS_SHTONALW;Ancho tonal de Sombras
TP_SHARPENEDGE_AMOUNT;Cantidad
TP_SHARPENEDGE_LABEL;Bordes
diff --git a/rtdata/languages/Euskara b/rtdata/languages/Euskara
deleted file mode 100644
index 719e03f79..000000000
--- a/rtdata/languages/Euskara
+++ /dev/null
@@ -1,2329 +0,0 @@
-#01 2008-03-03 Ioritz Ibarguren
-
-CURVEEDITOR_LINEAR;Lineala
-CURVEEDITOR_LOADDLGLABEL;Kurba ireki...
-CURVEEDITOR_SAVEDLGLABEL;Kurba gorde...
-CURVEEDITOR_TOOLTIPLINEAR;Kurba lineala berrabiarazi
-CURVEEDITOR_TOOLTIPLOAD;Artxibo batetik kurba ireki
-CURVEEDITOR_TOOLTIPSAVE;Uneko kurba gorde
-DIRBROWSER_FOLDERS;Karpetak
-EXIFFILTER_APERTURE;Aperture
-EXIFFILTER_CAMERA;Camera
-EXIFFILTER_FOCALLEN;Focal Length
-EXIFFILTER_ISO;ISO
-EXIFFILTER_LENS;Lens
-EXIFFILTER_SHUTTER;Shutter
-EXIFPANEL_ADDEDIT;Add/Edit
-EXIFPANEL_ADDEDITHINT;Add new tag or edit tag
-EXIFPANEL_ADDTAGDLG_ENTERVALUE;Enter value
-EXIFPANEL_ADDTAGDLG_SELECTTAG;Select tag
-EXIFPANEL_ADDTAGDLG_TITLE;Add/Edit Tag
-EXIFPANEL_KEEP;Keep
-EXIFPANEL_KEEPHINT;Keep the selected tags when writing output file
-EXIFPANEL_REMOVE;Remove
-EXIFPANEL_REMOVEHINT;Remove the selected tags when writing output file
-EXIFPANEL_RESET;Reset
-EXIFPANEL_RESETALL;Reset All
-EXIFPANEL_RESETALLHINT;Reset all tags to their original values
-EXIFPANEL_RESETHINT;Reset the selected tags to their original values
-EXIFPANEL_SUBDIRECTORY;Subdirectory
-FILEBROWSER_APPLYPROFILE;Apply profile
-FILEBROWSER_CLEARPROFILE;Clear profile
-FILEBROWSER_COPYPROFILE;Copy profile
-FILEBROWSER_DELETEDLGLABEL;File delete confirmation
-FILEBROWSER_DELETEDLGMSG;Are you sure you want to delete the selected %1 files?
-FILEBROWSER_EMPTYTRASH;Empty Trash
-FILEBROWSER_EMPTYTRASHHINT;Permanently delete the files of the trash
-FILEBROWSER_PARTIALPASTEPROFILE;Partial paste
-FILEBROWSER_PASTEPROFILE;Paste profile
-FILEBROWSER_POPUPCANCELJOB;Cancel job
-FILEBROWSER_POPUPMOVEEND;Move to end of queue
-FILEBROWSER_POPUPMOVEHEAD;Move to head of queue
-FILEBROWSER_POPUPOPEN;Open
-FILEBROWSER_POPUPOPENINEDITOR;Open in Editor
-FILEBROWSER_POPUPPROCESS;Put to processing queue
-FILEBROWSER_POPUPREMOVE;Remove from filesystem
-FILEBROWSER_POPUPRENAME;Rename
-FILEBROWSER_POPUPSELECTALL;Select all
-FILEBROWSER_POPUPTRASH;Move to trash
-FILEBROWSER_POPUPUNRANK;Unrank
-FILEBROWSER_POPUPUNTRASH;Remove from trash
-FILEBROWSER_RENAMEDLGLABEL;Rename file
-FILEBROWSER_SHOWDIRHINT;Show all images of the directory
-FILEBROWSER_SHOWRANK1HINT;Show images ranked as 1 star
-FILEBROWSER_SHOWRANK2HINT;Show images ranked as 2 star
-FILEBROWSER_SHOWRANK3HINT;Show images ranked as 3 star
-FILEBROWSER_SHOWRANK4HINT;Show images ranked as 4 star
-FILEBROWSER_SHOWRANK5HINT;Show images ranked as 5 star
-FILEBROWSER_SHOWTRASHHINT;Show content of the trash
-FILEBROWSER_SHOWUNRANKHINT;Show unranked images
-FILEBROWSER_THUMBSIZE;Thumb. size
-FILEBROWSER_ZOOMINHINT;Increase thumbnail size
-FILEBROWSER_ZOOMOUTHINT;Decrease thumbnail size
-GENERAL_ABOUT;Honi buruz
-GENERAL_CANCEL;Baztertu
-GENERAL_DISABLE;Ezestatu
-GENERAL_DISABLED;Ezeztatua
-GENERAL_ENABLE;Gaitu
-GENERAL_ENABLED;Gaitua
-GENERAL_LANDSCAPE;Paisaia
-GENERAL_NA;n/a
-GENERAL_NO;Ez
-GENERAL_OK;Onartu
-GENERAL_PORTRAIT;Erretratua
-GENERAL_SAVE;Gorde
-HISTOGRAM_TOOLTIP_B;Erakutsi/Ezkutatu urdin histograma
-HISTOGRAM_TOOLTIP_G;Erakutsi/Ezkutatu berde histograma
-HISTOGRAM_TOOLTIP_L;Erakutsi/Ezkutatu CIELAB argitasun histograma
-HISTOGRAM_TOOLTIP_R;Erakutsi/Ezkutatu gorri histograma
-HISTORY_CHANGED;Changed
-HISTORY_CUSTOMCURVE;Neurriko kurba
-HISTORY_FROMCLIPBOARD;From clipboard
-HISTORY_LABEL;Historia
-HISTORY_MSG_1;Argazki irekia
-HISTORY_MSG_2;Profila irekia
-HISTORY_MSG_3;Profila aldatua
-HISTORY_MSG_4;Historia arakatu
-HISTORY_MSG_5;Argitasuna
-HISTORY_MSG_6;Kontrastea
-HISTORY_MSG_7;Beltza
-HISTORY_MSG_8;Esposizio konpentsazioa
-HISTORY_MSG_9;Argi konpresioa
-HISTORY_MSG_10;Itzal konpresioa
-HISTORY_MSG_11;Tonu kurba
-HISTORY_MSG_12;Auto-esposizioa
-HISTORY_MSG_13;Esposizio mozketa
-HISTORY_MSG_14;Liminantzia argitasuna
-HISTORY_MSG_15;Luminantzia kontrastea
-HISTORY_MSG_16;Luminantzia beltza
-HISTORY_MSG_17;Liminantzia argi konpresioa
-HISTORY_MSG_18;Luminantzia itzal konpresioa
-HISTORY_MSG_19;Luminantzia kurba
-HISTORY_MSG_20;Fokatzea
-HISTORY_MSG_21;Fokatze erradioa
-HISTORY_MSG_22;Fokatze kopurua
-HISTORY_MSG_23;Fokatze muga
-HISTORY_MSG_24;Ertzak bakarrik fokatu
-HISTORY_MSG_25;Ertz detekzio erradio fokatzea
-HISTORY_MSG_26;Ertz tolerantzia fokatzea
-HISTORY_MSG_27;Halo kontrol fokatzea
-HISTORY_MSG_28;Halo kopuru kontrola
-HISTORY_MSG_29;Fokatze metodoa
-HISTORY_MSG_30;Dekonboluzio erradioa
-HISTORY_MSG_31;Dekonboluzio kopurua
-HISTORY_MSG_32;Dekonboluzio indargetzea
-HISTORY_MSG_33;Dekonboluzio iterazioak
-HISTORY_MSG_34;Kolore mozketa ekidin
-HISTORY_MSG_35;Saturazio mugatzailea
-HISTORY_MSG_36;Saturazio muga
-HISTORY_MSG_37;Koloreak jaso
-HISTORY_MSG_38;Zuri balantze metodoa
-HISTORY_MSG_39;Kolore tenperatura
-HISTORY_MSG_40;Zuri balantze tonua
-HISTORY_MSG_41;"A" kolore aldaketa
-HISTORY_MSG_42;"B" kolore aldaketa
-HISTORY_MSG_43;Luminantzia zarata murrizketa
-HISTORY_MSG_44;Lum. zar. murr. erradioa
-HISTORY_MSG_45;Lum. zar. murr. ertz tolerantzia
-HISTORY_MSG_46;Kolore zarata murrizketa
-HISTORY_MSG_47;Kol. zar. murr. erradioa
-HISTORY_MSG_48;Kol. zar. murr. ertz tolerantzia
-HISTORY_MSG_49;Kol. zar. murr. ertzekiko sentikorra
-HISTORY_MSG_50;Itzal/Argi tresna
-HISTORY_MSG_51;Argiak jaso
-HISTORY_MSG_52;Itzalak jaso
-HISTORY_MSG_53;Argi tonu zabalera
-HISTORY_MSG_54;Itzal tonu zabalera
-HISTORY_MSG_55;Tokiko kontrastea
-HISTORY_MSG_56;Itzal/Argi erradioa
-HISTORY_MSG_57;Biraketa arrunta
-HISTORY_MSG_58;Horizontalki irauli
-HISTORY_MSG_59;Bertikalki irauli
-HISTORY_MSG_60;Biraketa
-HISTORY_MSG_61;Biraketa
-HISTORY_MSG_62;Objetibo deformazio zuzenketa
-HISTORY_MSG_63;Lastermarka hautatua
-HISTORY_MSG_64;Argazkia moztu
-HISTORY_MSG_65;C/A zuzenketa
-HISTORY_MSG_66;Distira berreskurapena
-HISTORY_MSG_67;Distira berreskurapen kopurua
-HISTORY_MSG_68;Distira berreskurapen metodoa
-HISTORY_MSG_69;Lan kolore esparrua
-HISTORY_MSG_70;Irteera kolore esparrua
-HISTORY_MSG_71;Sarrera kolore esparrua
-HISTORY_MSG_72;Iluntze zuzenketa
-HISTORY_MSG_73;Kanal nahastainlea
-HISTORY_MSG_74;Eskala tamaina aldaketa
-HISTORY_MSG_75;Tamaina aldaketa metodoa
-HISTORY_MSG_76;Exif Metadata
-HISTORY_MSG_77;IPTC Metadata
-HISTORY_MSG_78;Data specified for resize
-HISTORY_MSG_79;Resize width
-HISTORY_MSG_80;Resize height
-HISTORY_MSG_81;Resize enabled
-HISTORY_NEWSNAPSHOT;Argazki berria
-HISTORY_SNAPSHOT;Argazkia
-HISTORY_SNAPSHOTS;Argazkiak
-IPTCPANEL_CATEGORY;Category
-IPTCPANEL_CITY;City
-IPTCPANEL_COPYHINT;Copy IPTC settings to clipboard
-IPTCPANEL_COUNTRY;Country
-IPTCPANEL_CREDIT;Credit
-IPTCPANEL_CREDITHINT;Identifies the provider of the image, not necessarily the owner/creator (Credit).
-IPTCPANEL_DATECREATED;Date Created
-IPTCPANEL_EMBEDDED;Embedded
-IPTCPANEL_EMBEDDEDHINT;Reset to IPTC data embedded in the image file
-IPTCPANEL_HEADLINE;Headline
-IPTCPANEL_INSTRUCTIONS;Instructions
-IPTCPANEL_KEYWORDS;Keywords
-IPTCPANEL_PASTEHINT;Paste IPTC settings from clipboard
-IPTCPANEL_RESET;Reset
-IPTCPANEL_RESETHINT;Reset to profile default
-IPTCPANEL_SOURCE;Source
-IPTCPANEL_TITLE;Title
-MAIN_BUTTON_PREFERENCES;Ezarpenak
-MAIN_BUTTON_SAVE;Irudia gorde
-MAIN_BUTTON_SENDTOEDITOR;Send to editor
-MAIN_FRAME_BATCHQUEUE;Batch Queue
-MAIN_FRAME_FILEBROWSER;File Browser
-MAIN_FRAME_PLACES;Places
-MAIN_FRAME_PLACES_ADD;Add
-MAIN_FRAME_RECENT;Recent Folders
-MAIN_MSG_ALREADYEXISTS;Artxiboa jadanik badago.
-MAIN_MSG_CANNOTLOAD;Ezin dut irudia ireki
-MAIN_MSG_CANNOTSAVE;Errorea irudia gordetzen
-MAIN_MSG_CANNOTSTARTEDITOR;Can not start editor.
-MAIN_MSG_CANNOTSTARTEDITOR_SECONDARY;Please set the correct path in the "Preferences" dialog.
-MAIN_MSG_QOVERWRITE;Gainidatzi?
-MAIN_TAB_COLOR;Color
-MAIN_TAB_DETAIL;Detail
-MAIN_TAB_DEVELOP;Develop
-MAIN_TAB_EXIF;Exif
-MAIN_TAB_EXPOSURE;Exposure
-MAIN_TAB_FILTER;Filter
-MAIN_TAB_IPTC;IPTC
-MAIN_TAB_METADATA;Metadata
-MAIN_TAB_TRANSFORM;Bihurtu
-MAIN_TOOLTIP_HIDEHP;Erakutsi/Ezkutatu ezker panela (historia, shortcut key: H)
-MAIN_TOOLTIP_INDCLIPPEDH;Mozturiko argi adierazlea
-MAIN_TOOLTIP_INDCLIPPEDS;Mozturiko itzal adierazlea
-MAIN_TOOLTIP_QINFO; Irudiaren informazio laburra
-PARTIALPASTE_BASICGROUP;Basic settings
-PARTIALPASTE_CACORRECTION;C/A correction
-PARTIALPASTE_COARSETRANS;90 deg rotation / flipping
-PARTIALPASTE_COLORGROUP;Color related settings
-PARTIALPASTE_COMPOSITIONGROUP;Composition settings
-PARTIALPASTE_CROP;Crop
-PARTIALPASTE_DIALOGLABEL;Partial paste processing profile
-PARTIALPASTE_DISTORTION;Distortion correction
-PARTIALPASTE_EXIFCHANGES;Changes to exif data
-PARTIALPASTE_EXPOSURE;Exposure
-PARTIALPASTE_ICMSETTINGS;ICM settings
-PARTIALPASTE_IPTCINFO;IPTC info
-PARTIALPASTE_LENSGROUP;Lens related settings
-PARTIALPASTE_METAGROUP;Metadata
-PARTIALPASTE_RESIZE;Resize
-PARTIALPASTE_ROTATION;Rotation
-PARTIALPASTE_SHADOWSHIGHLIGHTS;Shadows/Highlights
-PARTIALPASTE_SHARPENING;Sharpening
-PARTIALPASTE_VIGNETTING;Vignetting correction
-PARTIALPASTE_WHITEBALANCE;White balance
-PREFERENCES_APPLNEXTSTARTUP;hurrengo abioan aplikatua
-PREFERENCES_CACHEMAXENTRIES;Maximal Number of Cache Entries
-PREFERENCES_CACHEOPTS;Cache Options
-PREFERENCES_CACHETHUMBHEIGHT;Maximal Thumbnail Height
-PREFERENCES_CLIPPINGIND;Itzal/argi moztuen adierazlea
-PREFERENCES_DATEFORMAT;Data formatua
-PREFERENCES_DATEFORMATHINT;You can use the following formatting strings:\n%y : year\n%m : month\n%d : day\n\nFor example, the hungarian date format is:\n%y/%m/%d
-PREFERENCES_DIRHOME;Etxe karpeta
-PREFERENCES_DIRLAST;Azkena ikusitako karpeta
-PREFERENCES_DIROTHER;Besterik
-PREFERENCES_DIRSELECTDLG;Abioko irudien karpeta hautatu...
-PREFERENCES_DIRSOFTWARE;Inatalazio karpeta
-PREFERENCES_EXTERNALEDITOR;External editor
-PREFERENCES_FBROWSEROPTS;Arakatzailearen aukerak
-PREFERENCES_FILEFORMAT;Artxiboen formatua
-PREFERENCES_FORIMAGE;Irudi artxiboetarako
-PREFERENCES_FORRAW;RAW artxiboetarako
-PREFERENCES_GIMPPATH;GIMP installation directory
-PREFERENCES_HLTHRESHOLD;Moztutako argien muga
-PREFERENCES_ICCDIR;ICC profilen karpeta
-PREFERENCES_IMPROCPARAMS;Irudi prozesurako aukera lehenetsiak
-PREFERENCES_INTENT_ABSOLUTE;Kolorimetriko absolutua
-PREFERENCES_INTENT_PERCEPTUAL;Petzeptuala
-PREFERENCES_INTENT_RELATIVE;Kolorimetriko erlatiboa
-PREFERENCES_INTENT_SATURATION;Saturazioa
-PREFERENCES_OUTDIR;Irteera karpeta
-PREFERENCES_OUTDIRFOLDER;Save to folder
-PREFERENCES_OUTDIRFOLDERHINT;Put the saved images to the seledted folder
-PREFERENCES_OUTDIRTEMPLATE;Use Template
-PREFERENCES_OUTDIRTEMPLATEHINT;You can use the following formatting strings:\n%f, %d1, %d2, ..., %p1, %p2, ...\n\nThese formatting strings refer to the directories and sub-paths of the path of the raw file.\n\nFor example, if /home/tom/image/02-09-2006/dsc0012.nefhas been opened, the meaning of the formatting strings are:\n%f=dsc0012, %d1=02-09-2006, %d2=image, ...\n%p1=/home/tom/image/02-09-2006, %p2=/home/tom/image, p3=/home/tom, ...\n\nIf you want to save the output image where the original is, write:\n%p1/%f\n\nIf you want to save the output image in a directory 'converted' located the directory of the original, write:\n%p1/converted/%f\n\nIf you want to save the output image in directory '/home/tom/converted' with keeping the same subdirectory of dates, write:\n%p2/converted/%d1/%f
-PREFERENCES_PARSEDEXT;Parsed Extensions
-PREFERENCES_PARSEDEXTADD;Add Extension
-PREFERENCES_PARSEDEXTADDHINT;Type an extension and press this button to append list
-PREFERENCES_PARSEDEXTDELHINT;Delete selected extension from the list
-PREFERENCES_PROFILEHANDLING;Processing Profile Handling
-PREFERENCES_PROFILELOADPR;Profile Loading Priority
-PREFERENCES_PROFILEPRCACHE;Profile in Cache
-PREFERENCES_PROFILEPRFILE;Profile Next to the Input File
-PREFERENCES_PROFILESAVECACHE;Save Processing Parameters to the Cache
-PREFERENCES_PROFILESAVEINPUT;Save Processing Parameters Next to the Input File
-PREFERENCES_PSPATH;Adobe Photoshop installation directory
-PREFERENCES_SELECTLANG;Hizkuntza hautatu
-PREFERENCES_SHOWBASICEXIF;Oinarrizko EXIF datuak bistaratu
-PREFERENCES_SHOWDATETIME;Data eta ordua bistratu
-PREFERENCES_SHTHRESHOLD;Moztutako itzalen muga
-PREFERENCES_STARTUPIMDIR;Abioako irudien karpeta
-PREFERENCES_TAB_BROWSER;Artxibo arakatzailea
-PREFERENCES_TAB_COLORMGR;Kolore kudeaketa
-PREFERENCES_TAB_GENERAL;Orokorra
-PREFERENCES_TAB_IMPROC;Irudien prozesua
-PROFILEPANEL_LABEL;Prozesu profilak
-PROFILEPANEL_LOADDLGLABEL;Profilaren aldagaiak ireki...
-PROFILEPANEL_PCUSTOM;Neurrira
-PROFILEPANEL_PFILE;Artxibotik
-PROFILEPANEL_PLASTSAVED;Gordtako azkena
-PROFILEPANEL_SAVEDLGLABEL;Profilaren aldagaiak gorde...
-PROFILEPANEL_TOOLTIPCOPY;Copy current profile to clipboard
-PROFILEPANEL_TOOLTIPLOAD;Profila artxibotik ireki
-PROFILEPANEL_TOOLTIPPASTE; Paste profile from clipboard
-PROFILEPANEL_TOOLTIPSAVE;Uneko profila gorde
-PROGRESSBAR_LOADING;Irudia ireki...
-PROGRESSBAR_LOADJPEG;JPG artxiboa irekitzen...
-PROGRESSBAR_LOADPNG;PNG artxiboa irekitzen...
-PROGRESSBAR_LOADTIFF;TIFF artxiboa irekitzen...
-PROGRESSBAR_PROCESSING;Irudiaren prozesua...
-PROGRESSBAR_READY;Prest
-PROGRESSBAR_SAVEJPEG;JPG artxiboa gordetzen...
-PROGRESSBAR_SAVEPNG;PNG artxiboa gordetzen...
-PROGRESSBAR_SAVETIFF;TIFF artxiboa gordetzen...
-QINFO_ISO;ISO
-QINFO_NOEXIF;Ez dago EXIF daturik.
-SAVEDLG_FILEFORMAT;Artxiboaren formatua
-SAVEDLG_JPEGQUAL;JPEG kalitatea
-SAVEDLG_PNGCOMPR;PNG konpresioa
-SAVEDLG_PUTTOQUEUE;Put into processing queue
-SAVEDLG_PUTTOQUEUEHEAD;Put to the head of the processing queue
-SAVEDLG_PUTTOQUEUETAIL;Put to the end of the processing queue
-SAVEDLG_SAVEIMMEDIATELY;Save immediately
-SAVEDLG_SAVESPP;Prozesu aldagaiak irudiarekin batera gorde
-TOOLBAR_TOOLTIP_CROP;Hautapena moztu (shortcut key: C)
-TOOLBAR_TOOLTIP_HAND;Esku tresna (shortcut key: N)
-TOOLBAR_TOOLTIP_STRAIGHTEN;Lerro zuzena hautatu (shortcut key: S)
-TOOLBAR_TOOLTIP_WB;Zuri balantze puntuala (shortcut key: W)
-TP_CACORRECTION_BLUE;Urdina
-TP_CACORRECTION_LABEL;C/A zuzenketa
-TP_CACORRECTION_RED;Gorria
-TP_CHMIXER_BLUE;Urdina
-TP_CHMIXER_GREEN;Berdea
-TP_CHMIXER_LABEL;Kanal nahastailea
-TP_CHMIXER_RED;Gorria
-TP_COARSETRAF_TOOLTIP_HFLIP;Horizontalki irauli
-TP_COARSETRAF_TOOLTIP_ROTLEFT;Errotazioa ezkerraldera
-TP_COARSETRAF_TOOLTIP_ROTRIGHT;Errotazioa eskunialdera
-TP_COARSETRAF_TOOLTIP_VFLIP;Bertikalki irauli
-TP_CROP_FIXRATIO;Erlazio finkoa:
-TP_CROP_GTDIAGONALS;Diagonalen erregela
-TP_CROP_GTNONE;Bat ere ez
-TP_CROP_GTRULETHIRDS;Herenen erregela
-TP_CROP_GUIDETYPE;Gida mota:
-TP_CROP_H;H
-TP_CROP_LABEL;Moztu
-TP_CROP_W;W
-TP_CROP_X;x
-TP_CROP_Y;y
-TP_DISTORTION_AMOUNT;Kopurua
-TP_DISTORTION_LABEL;Distortsioa
-TP_EXPOSURE_AUTOLEVELS;Maila auto.
-TP_EXPOSURE_BLACKLEVEL;Beltza
-TP_EXPOSURE_BRIGHTNESS;Distira
-TP_EXPOSURE_CLIP;Moztu
-TP_EXPOSURE_COMPRHIGHLIGHTS;Argi konpresioa
-TP_EXPOSURE_COMPRSHADOWS;Itzal konpresioa
-TP_EXPOSURE_CONTRAST;Kontrastea
-TP_EXPOSURE_CURVEEDITOR;Tonu kurba
-TP_EXPOSURE_EXPCOMP;Esp. Konp.
-TP_EXPOSURE_LABEL;Esposizioa
-TP_HLREC_CIELAB;CIELab Blending
-TP_HLREC_COLOR;Kolorearen hedapena
-TP_HLREC_LABEL;Distiren berreskurapena
-TP_HLREC_LUMINANCE;Argitasun berreskurapena
-TP_HLREC_METHOD;Metodoa:
-TP_ICM_INPUTCAMERA;Kameraren jatorrizko balioak
-TP_ICM_INPUTCUSTOM;Neurrira
-TP_ICM_INPUTDLGLABEL;Sarrerako ICC profila hautatu...
-TP_ICM_INPUTEMBEDDED;Txertatutakoa erabili, egonez gero
-TP_ICM_INPUTPROFILE;Sarrerako profila
-TP_ICM_LABEL;ICM
-TP_ICM_NOICM;ICM-rik ez: sRGB irteera
-TP_ICM_OUTPUTPROFILE;Irteera profila
-TP_ICM_WORKINGPROFILE;Lan profila
-TP_RAW_DMETHOD;Metodoa
-TP_RAW_FALSECOLOR;Okerreko kolore ezabaketa atalak
-TP_RESIZE_H;H:
-TP_RESIZE_LABEL;Tamaina aldatu
-TP_RESIZE_METHOD;Metodoa:
-TP_RESIZE_NEAREST;Gertuena
-TP_RESIZE_SCALE;Eskala
-TP_RESIZE_W;W:
-TP_ROTATE_DEGREE;Angelua
-TP_ROTATE_LABEL;Errotazioa
-TP_ROTATE_SELECTLINE; Lerro zuzena hautatu
-TP_SHADOWSHLIGHTS_HIGHLIGHTS;Argiak
-TP_SHADOWSHLIGHTS_HLTONALW;Tonu zabalera
-TP_SHADOWSHLIGHTS_LABEL;Itzalak/Argiak
-TP_SHADOWSHLIGHTS_LOCALCONTR;Tokiko kontrastea
-TP_SHADOWSHLIGHTS_RADIUS;Erradioa
-TP_SHADOWSHLIGHTS_SHADOWS;Itzalak
-TP_SHADOWSHLIGHTS_SHTONALW;Tonu zabalera
-TP_SHARPENING_AMOUNT;Kopurua
-TP_SHARPENING_EDRADIUS;Erradioa
-TP_SHARPENING_EDTOLERANCE;Ertz tolerantzia
-TP_SHARPENING_HALOCONTROL;Halo kontrola
-TP_SHARPENING_HCAMOUNT;Kopurua
-TP_SHARPENING_LABEL;Fokatu
-TP_SHARPENING_METHOD;Metodoa
-TP_SHARPENING_ONLYEDGES;Ertzak bakarrik fokatu
-TP_SHARPENING_RADIUS;Erradioa
-TP_SHARPENING_RLD;RL Dekonboluzioa
-TP_SHARPENING_RLD_AMOUNT;Kopurua
-TP_SHARPENING_RLD_DAMPING;Indargetzea
-TP_SHARPENING_RLD_ITERATIONS;Iterazioak
-TP_SHARPENING_THRESHOLD;Muga
-TP_SHARPENING_USM;Defokatze maskara
-TP_VIGNETTING_AMOUNT;Kopurua
-TP_VIGNETTING_LABEL;Iluntze zuzenketa
-TP_VIGNETTING_RADIUS;Erradioa
-TP_WBALANCE_AUTO;Auto
-TP_WBALANCE_CAMERA;Camera
-TP_WBALANCE_CUSTOM;Pertsonalizatua
-TP_WBALANCE_GREEN;Tindua
-TP_WBALANCE_LABEL;Zuri balantzea
-TP_WBALANCE_METHOD;Metodoa
-TP_WBALANCE_SIZE;Tamaina:
-TP_WBALANCE_SPOTWB;Z/B Puntuala
-TP_WBALANCE_TEMPERATURE;Tenperatura
-#
-
-!!!!!!!!!!!!!!!!!!!!!!!!!
-! Untranslated keys follow; remove the ! prefix after an entry is translated.
-!!!!!!!!!!!!!!!!!!!!!!!!!
-
-!ABOUT_TAB_BUILD;Version
-!ABOUT_TAB_CREDITS;Credits
-!ABOUT_TAB_LICENSE;License
-!ABOUT_TAB_RELEASENOTES;Release Notes
-!ABOUT_TAB_SPLASH;Splash
-!ADJUSTER_RESET_TO_DEFAULT;Click - reset to default value.\nCtrl+click - reset to initial value.
-!BATCHQUEUE_AUTOSTART;Auto-start
-!BATCHQUEUE_AUTOSTARTHINT;Start processing automatically when a new job arrives.
-!BATCHQUEUE_DESTFILENAME;Path and file name
-!BATCHQUEUE_STARTSTOPHINT;Start or stop processing the images in the queue.\n\nShortcut: Ctrl+s
-!BATCH_PROCESSING;Batch Processing
-!CURVEEDITOR_AXIS_IN;I:
-!CURVEEDITOR_AXIS_LEFT_TAN;LT:
-!CURVEEDITOR_AXIS_OUT;O:
-!CURVEEDITOR_AXIS_RIGHT_TAN;RT:
-!CURVEEDITOR_CATMULLROM;Flexible
-!CURVEEDITOR_CURVE;Curve
-!CURVEEDITOR_CURVES;Curves
-!CURVEEDITOR_CUSTOM;Standard
-!CURVEEDITOR_DARKS;Darks
-!CURVEEDITOR_EDITPOINT_HINT;Enable edition of node in/out values.\n\nRight-click on a node to select it.\nRight-click on empty space to de-select the node.
-!CURVEEDITOR_HIGHLIGHTS;Highlights
-!CURVEEDITOR_LIGHTS;Lights
-!CURVEEDITOR_MINMAXCPOINTS;Equalizer
-!CURVEEDITOR_NURBS;Control cage
-!CURVEEDITOR_PARAMETRIC;Parametric
-!CURVEEDITOR_SHADOWS;Shadows
-!CURVEEDITOR_TOOLTIPCOPY;Copy current curve to clipboard.
-!CURVEEDITOR_TOOLTIPPASTE;Paste curve from clipboard.
-!CURVEEDITOR_TYPE;Type:
-!DONT_SHOW_AGAIN;Don't show this message again.
-!DYNPROFILEEDITOR_DELETE;Delete
-!DYNPROFILEEDITOR_EDIT;Edit
-!DYNPROFILEEDITOR_EDIT_RULE;Edit Dynamic Profile Rule
-!DYNPROFILEEDITOR_ENTRY_TOOLTIP;The matching is case insensitive.\nUse the "re:" prefix to enter\na regular expression.
-!DYNPROFILEEDITOR_IMGTYPE_ANY;Any
-!DYNPROFILEEDITOR_IMGTYPE_HDR;HDR
-!DYNPROFILEEDITOR_IMGTYPE_PS;Pixel Shift
-!DYNPROFILEEDITOR_IMGTYPE_STD;Standard
-!DYNPROFILEEDITOR_MOVE_DOWN;Move Down
-!DYNPROFILEEDITOR_MOVE_UP;Move Up
-!DYNPROFILEEDITOR_NEW;New
-!DYNPROFILEEDITOR_NEW_RULE;New Dynamic Profile Rule
-!DYNPROFILEEDITOR_PROFILE;Processing Profile
-!EDITWINDOW_TITLE;Image Edit
-!EDIT_OBJECT_TOOLTIP;Displays a widget on the preview window which lets you adjust this tool.
-!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
-!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
-!EXIFFILTER_FILETYPE;File type
-!EXIFFILTER_IMAGETYPE;Image type
-!EXIFFILTER_METADATAFILTER;Enable metadata filters
-!EXIFPANEL_SHOWALL;Show all
-!EXPORT_BYPASS;Processing steps to bypass
-!EXPORT_BYPASS_ALL;Select / Unselect All
-!EXPORT_BYPASS_DEFRINGE;Bypass Defringe
-!EXPORT_BYPASS_DIRPYRDENOISE;Bypass Noise Reduction
-!EXPORT_BYPASS_DIRPYREQUALIZER;Bypass Contrast by Detail Levels
-!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
-!EXPORT_BYPASS_RAW_CA;Bypass [raw] Chromatic Aberration Correction
-!EXPORT_BYPASS_RAW_CCSTEPS;Bypass [raw] False Color Suppression
-!EXPORT_BYPASS_RAW_DCB_ENHANCE;Bypass [raw] DCB Enhancement Steps
-!EXPORT_BYPASS_RAW_DCB_ITERATIONS;Bypass [raw] DCB Iterations
-!EXPORT_BYPASS_RAW_DF;Bypass [raw] Dark-Frame
-!EXPORT_BYPASS_RAW_FF;Bypass [raw] Flat-Field
-!EXPORT_BYPASS_RAW_GREENTHRESH;Bypass [raw] Green Equilibration
-!EXPORT_BYPASS_RAW_LINENOISE;Bypass [raw] Line Noise Filter
-!EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Bypass [raw] LMMSE Enhancement Steps
-!EXPORT_BYPASS_SHARPENEDGE;Bypass Edge Sharpening
-!EXPORT_BYPASS_SHARPENING;Bypass Sharpening
-!EXPORT_BYPASS_SHARPENMICRO;Bypass Microcontrast
-!EXPORT_BYPASS_SH_HQ;Bypass Sharp Mask Shadows/Highlights
-!EXPORT_FASTEXPORTOPTIONS;Fast Export Options
-!EXPORT_INSTRUCTIONS;Fast Export options provide overrides to bypass time and resource consuming development settings and to run queue processing using the fast export settings instead. This method is recommended for quicker generation of lower resolution images when speed is a priority or when resized output is desired for one or many images without making modifications to their saved development parameters.
-!EXPORT_MAXHEIGHT;Maximum height:
-!EXPORT_MAXWIDTH;Maximum width:
-!EXPORT_PIPELINE;Processing pipeline
-!EXPORT_PUTTOQUEUEFAST; Put to queue for fast export
-!EXPORT_RAW_DMETHOD;Demosaic method
-!EXPORT_USE_FAST_PIPELINE;Dedicated (full processing on resized image)
-!EXPORT_USE_FAST_PIPELINE_TIP;Use a dedicated processing pipeline for images in Fast Export mode, that trades speed for quality. Resizing of the image is done as early as possible, instead of doing it at the end like in the normal pipeline. The speedup can be significant, but be prepared to see artifacts and a general degradation of output quality.
-!EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
-!EXTPROGTARGET_1;raw
-!EXTPROGTARGET_2;queue-processed
-!FILEBROWSER_ADDDELTEMPLATE;Add/Del templates...
-!FILEBROWSER_APPLYPROFILE_PARTIAL;Apply - partial
-!FILEBROWSER_AUTODARKFRAME;Auto dark-frame
-!FILEBROWSER_AUTOFLATFIELD;Auto flat-field
-!FILEBROWSER_BROWSEPATHBUTTONHINT;Click to open specified path, reload folder and apply "find" keywords.
-!FILEBROWSER_BROWSEPATHHINT;Type a path to navigate to.\n\nKeyboard shortcuts:\nCtrl-o to focus to the path text box.\nEnter / Ctrl-Enter to browse there;\nEsc to clear changes.\nShift-Esc to remove focus.\n\nPath shortcuts:\n~ - user's home directory.\n! - user's pictures directory
-!FILEBROWSER_CACHE;Cache
-!FILEBROWSER_CACHECLEARFROMFULL;Clear all including cached profiles
-!FILEBROWSER_CACHECLEARFROMPARTIAL;Clear all except cached profiles
-!FILEBROWSER_COLORLABEL_TOOLTIP;Color label.\n\nUse dropdown menu or shortcuts:\nShift-Ctrl-0 No Color\nShift-Ctrl-1 Red\nShift-Ctrl-2 Yellow\nShift-Ctrl-3 Green\nShift-Ctrl-4 Blue\nShift-Ctrl-5 Purple
-!FILEBROWSER_CURRENT_NAME;Current name:
-!FILEBROWSER_DARKFRAME;Dark-frame
-!FILEBROWSER_DELETEDLGMSGINCLPROC;Are you sure you want to delete the selected %1 files including a queue-processed version?
-!FILEBROWSER_EXTPROGMENU;Open with
-!FILEBROWSER_FLATFIELD;Flat-Field
-!FILEBROWSER_MOVETODARKFDIR;Move to dark-frames directory
-!FILEBROWSER_MOVETOFLATFIELDDIR;Move to flat-fields directory
-!FILEBROWSER_NEW_NAME;New name:
-!FILEBROWSER_OPENDEFAULTVIEWER;Windows default viewer (queue-processed)
-!FILEBROWSER_POPUPCOLORLABEL;Color label
-!FILEBROWSER_POPUPCOLORLABEL0;Label: None
-!FILEBROWSER_POPUPCOLORLABEL1;Label: Red
-!FILEBROWSER_POPUPCOLORLABEL2;Label: Yellow
-!FILEBROWSER_POPUPCOLORLABEL3;Label: Green
-!FILEBROWSER_POPUPCOLORLABEL4;Label: Blue
-!FILEBROWSER_POPUPCOLORLABEL5;Label: Purple
-!FILEBROWSER_POPUPCOPYTO;Copy to...
-!FILEBROWSER_POPUPFILEOPERATIONS;File operations
-!FILEBROWSER_POPUPMOVETO;Move to...
-!FILEBROWSER_POPUPPROCESSFAST;Put to queue (Fast export)
-!FILEBROWSER_POPUPPROFILEOPERATIONS;Processing profile operations
-!FILEBROWSER_POPUPRANK;Rank
-!FILEBROWSER_POPUPRANK0;Unrank
-!FILEBROWSER_POPUPRANK1;Rank 1 *
-!FILEBROWSER_POPUPRANK2;Rank 2 **
-!FILEBROWSER_POPUPRANK3;Rank 3 ***
-!FILEBROWSER_POPUPRANK4;Rank 4 ****
-!FILEBROWSER_POPUPRANK5;Rank 5 *****
-!FILEBROWSER_POPUPREMOVEINCLPROC;Delete with output from queue
-!FILEBROWSER_QUERYBUTTONHINT;Clear the Find query
-!FILEBROWSER_QUERYHINT;Type filenames to search for. Supports partial filenames. Separate the search terms using commas, e.g.\n1001,1004,1199\n\nExclude search terms by prefixing them with !=\ne.g.\n!=1001,1004,1199\n\nShortcuts:\nCtrl-f - focus the Find box,\nEnter - search,\nEsc - clear the Find box,\nShift-Esc - defocus the Find box.
-!FILEBROWSER_QUERYLABEL; Find:
-!FILEBROWSER_RANK1_TOOLTIP;Rank 1 *\nShortcut: Shift-1
-!FILEBROWSER_RANK2_TOOLTIP;Rank 2 *\nShortcut: Shift-2
-!FILEBROWSER_RANK3_TOOLTIP;Rank 3 *\nShortcut: Shift-3
-!FILEBROWSER_RANK4_TOOLTIP;Rank 4 *\nShortcut: Shift-4
-!FILEBROWSER_RANK5_TOOLTIP;Rank 5 *\nShortcut: Shift-5
-!FILEBROWSER_RESETDEFAULTPROFILE;Reset to default
-!FILEBROWSER_SELECTDARKFRAME;Select dark-frame...
-!FILEBROWSER_SELECTFLATFIELD;Select flat-field...
-!FILEBROWSER_SHOWCOLORLABEL1HINT;Show images labeled Red.\nShortcut: Alt-1
-!FILEBROWSER_SHOWCOLORLABEL2HINT;Show images labeled Yellow.\nShortcut: Alt-2
-!FILEBROWSER_SHOWCOLORLABEL3HINT;Show images labeled Green.\nShortcut: Alt-3
-!FILEBROWSER_SHOWCOLORLABEL4HINT;Show images labeled Blue.\nShortcut: Alt-4
-!FILEBROWSER_SHOWCOLORLABEL5HINT;Show images labeled Purple.\nShortcut: Alt-5
-!FILEBROWSER_SHOWEDITEDHINT;Show edited images.\nShortcut: 7
-!FILEBROWSER_SHOWEDITEDNOTHINT;Show not edited images.\nShortcut: 6
-!FILEBROWSER_SHOWEXIFINFO;Show Exif info.\n\nShortcuts:\ni - Multiple Editor Tabs Mode,\nAlt-i - Single Editor Tab Mode.
-!FILEBROWSER_SHOWNOTTRASHHINT;Show only non-deleted images.
-!FILEBROWSER_SHOWORIGINALHINT;Show only original images.\n\nWhen several images exist with the same filename but different extensions, the one considered original is the one whose extension is nearest the top of the parsed extensions list in Preferences > File Browser > Parsed Extensions.
-!FILEBROWSER_SHOWRECENTLYSAVEDHINT;Show saved images.\nShortcut: Alt-7
-!FILEBROWSER_SHOWRECENTLYSAVEDNOTHINT;Show unsaved images.\nShortcut: Alt-6
-!FILEBROWSER_SHOWUNCOLORHINT;Show images without a color label.\nShortcut: Alt-0
-!FILEBROWSER_UNRANK_TOOLTIP;Unrank.\nShortcut: Shift-0
-!FILECHOOSER_FILTER_ANY;All files
-!FILECHOOSER_FILTER_COLPROF;Color profiles (*.icc)
-!FILECHOOSER_FILTER_CURVE;Curve files
-!FILECHOOSER_FILTER_LCP;Lens correction profiles
-!FILECHOOSER_FILTER_PP;Processing profiles
-!FILECHOOSER_FILTER_SAME;Same format as current photo
-!FILECHOOSER_FILTER_TIFF;TIFF files
-!GENERAL_AFTER;After
-!GENERAL_APPLY;Apply
-!GENERAL_ASIMAGE;As Image
-!GENERAL_AUTO;Automatic
-!GENERAL_BEFORE;Before
-!GENERAL_CLOSE;Close
-!GENERAL_CURRENT;Current
-!GENERAL_FILE;File
-!GENERAL_NONE;None
-!GENERAL_OPEN;Open
-!GENERAL_RESET;Reset
-!GENERAL_SAVE_AS;Save as...
-!GENERAL_SLIDER;Slider
-!GENERAL_UNCHANGED;(Unchanged)
-!GENERAL_WARNING;Warning
-!GIMP_PLUGIN_INFO;Welcome to the RawTherapee GIMP plugin!\nOnce you are done editing, simply close the main RawTherapee window and the image will be automatically imported in GIMP.
-!HISTOGRAM_TOOLTIP_BAR;Show/Hide RGB indicator bar.
-!HISTOGRAM_TOOLTIP_CHRO;Show/Hide chromaticity histogram.
-!HISTOGRAM_TOOLTIP_MODE;Toggle between linear, log-linear and log-log scaling of the histogram.
-!HISTOGRAM_TOOLTIP_RAW;Show/Hide raw histogram.
-!HISTORY_MSG_82;Profile changed
-!HISTORY_MSG_83;S/H - Sharp mask
-!HISTORY_MSG_84;Perspective correction
-!HISTORY_MSG_85;Lens Correction - LCP file
-!HISTORY_MSG_86;RGB Curves - Luminosity mode
-!HISTORY_MSG_87;Impulse Noise Reduction
-!HISTORY_MSG_88;Impulse NR threshold
-!HISTORY_MSG_89;Noise Reduction
-!HISTORY_MSG_90;NR - Luminance
-!HISTORY_MSG_91;NR - Chrominance master
-!HISTORY_MSG_92;NR - Gamma
-!HISTORY_MSG_93;CbDL - Value
-!HISTORY_MSG_94;Contrast by Detail Levels
-!HISTORY_MSG_95;L*a*b* - Chromaticity
-!HISTORY_MSG_96;L*a*b* - a* curve
-!HISTORY_MSG_97;L*a*b* - b* curve
-!HISTORY_MSG_98;Demosaicing method
-!HISTORY_MSG_99;Hot pixel filter
-!HISTORY_MSG_100;Exposure - Saturation
-!HISTORY_MSG_101;HSV - Hue
-!HISTORY_MSG_102;HSV - Saturation
-!HISTORY_MSG_103;HSV - Value
-!HISTORY_MSG_104;HSV Equalizer
-!HISTORY_MSG_105;Defringe
-!HISTORY_MSG_106;Defringe - Radius
-!HISTORY_MSG_107;Defringe - Threshold
-!HISTORY_MSG_108;Exposure - HLC threshold
-!HISTORY_MSG_109;Resize - Bounding box
-!HISTORY_MSG_110;Resize - Applies to
-!HISTORY_MSG_111;L*a*b* - Avoid color shift
-!HISTORY_MSG_112;--unused--
-!HISTORY_MSG_113;L*a*b* - Red/skin prot.
-!HISTORY_MSG_114;DCB iterations
-!HISTORY_MSG_115;False color suppression
-!HISTORY_MSG_116;DCB enhancement
-!HISTORY_MSG_117;Raw CA correction - Red
-!HISTORY_MSG_118;Raw CA correction - Blue
-!HISTORY_MSG_119;Line noise filter
-!HISTORY_MSG_120;Green equilibration
-!HISTORY_MSG_121;Raw CA Correction - Auto
-!HISTORY_MSG_122;Dark-Frame - Auto-selection
-!HISTORY_MSG_123;Dark-Frame - File
-!HISTORY_MSG_124;White point correction
-!HISTORY_MSG_126;Flat-Field - File
-!HISTORY_MSG_127;Flat-Field - Auto-selection
-!HISTORY_MSG_128;Flat-Field - Blur radius
-!HISTORY_MSG_129;Flat-Field - Blur type
-!HISTORY_MSG_130;Auto distortion correction
-!HISTORY_MSG_131;NR - Luma
-!HISTORY_MSG_132;NR - Chroma
-!HISTORY_MSG_133;Output gamma
-!HISTORY_MSG_134;Free gamma
-!HISTORY_MSG_135;Free gamma
-!HISTORY_MSG_136;Free gamma slope
-!HISTORY_MSG_137;Black level - Green 1
-!HISTORY_MSG_138;Black level - Red
-!HISTORY_MSG_139;Black level - Blue
-!HISTORY_MSG_140;Black level - Green 2
-!HISTORY_MSG_141;Black level - Link greens
-!HISTORY_MSG_142;ES - Iterations
-!HISTORY_MSG_143;ES - Quantity
-!HISTORY_MSG_144;Microcontrast - Quantity
-!HISTORY_MSG_145;Microcontrast - Uniformity
-!HISTORY_MSG_146;Edge sharpening
-!HISTORY_MSG_147;ES - Luminance only
-!HISTORY_MSG_148;Microcontrast
-!HISTORY_MSG_149;Microcontrast - 3×3 matrix
-!HISTORY_MSG_150;Post-demosaic artifact/noise red.
-!HISTORY_MSG_151;Vibrance
-!HISTORY_MSG_152;Vib - Pastel tones
-!HISTORY_MSG_153;Vib - Saturated tones
-!HISTORY_MSG_154;Vib - Protect skin-tones
-!HISTORY_MSG_155;Vib - Avoid color shift
-!HISTORY_MSG_156;Vib - Link pastel/saturated
-!HISTORY_MSG_157;Vib - P/S threshold
-!HISTORY_MSG_158;TM - Strength
-!HISTORY_MSG_159;TM - Edge stopping
-!HISTORY_MSG_160;TM - Scale
-!HISTORY_MSG_161;TM - Reweighting iterates
-!HISTORY_MSG_162;Tone Mapping
-!HISTORY_MSG_163;RGB Curves - Red
-!HISTORY_MSG_164;RGB Curves - Green
-!HISTORY_MSG_165;RGB Curves - Blue
-!HISTORY_MSG_166;Exposure - Reset
-!HISTORY_MSG_167;Demosaicing method
-!HISTORY_MSG_168;L*a*b* - CC curve
-!HISTORY_MSG_169;L*a*b* - CH curve
-!HISTORY_MSG_170;Vibrance - HH curve
-!HISTORY_MSG_171;L*a*b* - LC curve
-!HISTORY_MSG_172;L*a*b* - Restrict LC
-!HISTORY_MSG_173;NR - Detail recovery
-!HISTORY_MSG_174;CIECAM02
-!HISTORY_MSG_175;CAM02 - CAT02 adaptation
-!HISTORY_MSG_176;CAM02 - Viewing surround
-!HISTORY_MSG_177;CAM02 - Scene luminosity
-!HISTORY_MSG_178;CAM02 - Viewing luminosity
-!HISTORY_MSG_179;CAM02 - White-point model
-!HISTORY_MSG_180;CAM02 - Lightness (J)
-!HISTORY_MSG_181;CAM02 - Chroma (C)
-!HISTORY_MSG_182;CAM02 - Automatic CAT02
-!HISTORY_MSG_183;CAM02 - Contrast (J)
-!HISTORY_MSG_184;CAM02 - Scene surround
-!HISTORY_MSG_185;CAM02 - Gamut control
-!HISTORY_MSG_186;CAM02 - Algorithm
-!HISTORY_MSG_187;CAM02 - Red/skin prot.
-!HISTORY_MSG_188;CAM02 - Brightness (Q)
-!HISTORY_MSG_189;CAM02 - Contrast (Q)
-!HISTORY_MSG_190;CAM02 - Saturation (S)
-!HISTORY_MSG_191;CAM02 - Colorfulness (M)
-!HISTORY_MSG_192;CAM02 - Hue (h)
-!HISTORY_MSG_193;CAM02 - Tone curve 1
-!HISTORY_MSG_194;CAM02 - Tone curve 2
-!HISTORY_MSG_195;CAM02 - Tone curve 1
-!HISTORY_MSG_196;CAM02 - Tone curve 2
-!HISTORY_MSG_197;CAM02 - Color curve
-!HISTORY_MSG_198;CAM02 - Color curve
-!HISTORY_MSG_199;CAM02 - Output histograms
-!HISTORY_MSG_200;CAM02 - Tone mapping
-!HISTORY_MSG_201;NR - Chrominance - R&G
-!HISTORY_MSG_202;NR - Chrominance - B&Y
-!HISTORY_MSG_203;NR - Color space
-!HISTORY_MSG_204;LMMSE enhancement steps
-!HISTORY_MSG_205;CAM02 - Hot/bad pixel filter
-!HISTORY_MSG_206;CAT02 - Auto scene luminosity
-!HISTORY_MSG_207;Defringe - Hue curve
-!HISTORY_MSG_208;WB - B/R equalizer
-!HISTORY_MSG_210;GF - Angle
-!HISTORY_MSG_211;Graduated Filter
-!HISTORY_MSG_212;VF - Strength
-!HISTORY_MSG_213;Vignette Filter
-!HISTORY_MSG_214;Black-and-White
-!HISTORY_MSG_215;B&W - CM - Red
-!HISTORY_MSG_216;B&W - CM - Green
-!HISTORY_MSG_217;B&W - CM - Blue
-!HISTORY_MSG_218;B&W - Gamma - Red
-!HISTORY_MSG_219;B&W - Gamma - Green
-!HISTORY_MSG_220;B&W - Gamma - Blue
-!HISTORY_MSG_221;B&W - Color filter
-!HISTORY_MSG_222;B&W - Presets
-!HISTORY_MSG_223;B&W - CM - Orange
-!HISTORY_MSG_224;B&W - CM - Yellow
-!HISTORY_MSG_225;B&W - CM - Cyan
-!HISTORY_MSG_226;B&W - CM - Magenta
-!HISTORY_MSG_227;B&W - CM - Purple
-!HISTORY_MSG_228;B&W - Luminance equalizer
-!HISTORY_MSG_229;B&W - Luminance equalizer
-!HISTORY_MSG_230;B&W - Mode
-!HISTORY_MSG_231;B&W - 'Before' curve
-!HISTORY_MSG_232;B&W - 'Before' curve type
-!HISTORY_MSG_233;B&W - 'After' curve
-!HISTORY_MSG_234;B&W - 'After' curve type
-!HISTORY_MSG_235;B&W - CM - Auto
-!HISTORY_MSG_236;--unused--
-!HISTORY_MSG_237;B&W - CM
-!HISTORY_MSG_238;GF - Feather
-!HISTORY_MSG_239;GF - Strength
-!HISTORY_MSG_240;GF - Center
-!HISTORY_MSG_241;VF - Feather
-!HISTORY_MSG_242;VF - Roundness
-!HISTORY_MSG_243;VC - Radius
-!HISTORY_MSG_244;VC - Strength
-!HISTORY_MSG_245;VC - Center
-!HISTORY_MSG_246;L*a*b* - CL curve
-!HISTORY_MSG_247;L*a*b* - LH curve
-!HISTORY_MSG_248;L*a*b* - HH curve
-!HISTORY_MSG_249;CbDL - Threshold
-!HISTORY_MSG_250;NR - Enhanced
-!HISTORY_MSG_251;B&W - Algorithm
-!HISTORY_MSG_252;CbDL - Skin tar/prot
-!HISTORY_MSG_253;CbDL - Reduce artifacts
-!HISTORY_MSG_254;CbDL - Skin hue
-!HISTORY_MSG_255;NR - Median filter
-!HISTORY_MSG_256;NR - Median - Type
-!HISTORY_MSG_257;Color Toning
-!HISTORY_MSG_258;CT - Color curve
-!HISTORY_MSG_259;CT - Opacity curve
-!HISTORY_MSG_260;CT - a*[b*] opacity
-!HISTORY_MSG_261;CT - Method
-!HISTORY_MSG_262;CT - b* opacity
-!HISTORY_MSG_263;CT - Shadows - Red
-!HISTORY_MSG_264;CT - Shadows - Green
-!HISTORY_MSG_265;CT - Shadows - Blue
-!HISTORY_MSG_266;CT - Mid - Red
-!HISTORY_MSG_267;CT - Mid - Green
-!HISTORY_MSG_268;CT - Mid - Blue
-!HISTORY_MSG_269;CT - High - Red
-!HISTORY_MSG_270;CT - High - Green
-!HISTORY_MSG_271;CT - High - Blue
-!HISTORY_MSG_272;CT - Balance
-!HISTORY_MSG_273;CT - Color Balance SMH
-!HISTORY_MSG_274;CT - Sat. Shadows
-!HISTORY_MSG_275;CT - Sat. Highlights
-!HISTORY_MSG_276;CT - Opacity
-!HISTORY_MSG_277;--unused--
-!HISTORY_MSG_278;CT - Preserve luminance
-!HISTORY_MSG_279;CT - Shadows
-!HISTORY_MSG_280;CT - Highlights
-!HISTORY_MSG_281;CT - Sat. strength
-!HISTORY_MSG_282;CT - Sat. threshold
-!HISTORY_MSG_283;CT - Strength
-!HISTORY_MSG_284;CT - Auto sat. protection
-!HISTORY_MSG_285;NR - Median - Method
-!HISTORY_MSG_286;NR - Median - Type
-!HISTORY_MSG_287;NR - Median - Iterations
-!HISTORY_MSG_288;Flat-Field - Clip control
-!HISTORY_MSG_289;Flat-Field - Clip control - Auto
-!HISTORY_MSG_290;Black Level - Red
-!HISTORY_MSG_291;Black Level - Green
-!HISTORY_MSG_292;Black Level - Blue
-!HISTORY_MSG_293;Film Simulation
-!HISTORY_MSG_294;Film Simulation - Strength
-!HISTORY_MSG_295;Film Simulation - Film
-!HISTORY_MSG_296;NR - Luminance curve
-!HISTORY_MSG_297;NR - Mode
-!HISTORY_MSG_298;Dead pixel filter
-!HISTORY_MSG_299;NR - Chrominance curve
-!HISTORY_MSG_300;-
-!HISTORY_MSG_301;NR - Luma control
-!HISTORY_MSG_302;NR - Chroma method
-!HISTORY_MSG_303;NR - Chroma method
-!HISTORY_MSG_304;W - Contrast levels
-!HISTORY_MSG_305;Wavelet Levels
-!HISTORY_MSG_306;W - Process
-!HISTORY_MSG_307;W - Process
-!HISTORY_MSG_308;W - Process direction
-!HISTORY_MSG_309;W - ES - Detail
-!HISTORY_MSG_310;W - Residual - Sky tar/prot
-!HISTORY_MSG_311;W - Wavelet levels
-!HISTORY_MSG_312;W - Residual - Shadows threshold
-!HISTORY_MSG_313;W - Chroma - Sat/past
-!HISTORY_MSG_314;W - Gamut - Reduce artifacts
-!HISTORY_MSG_315;W - Residual - Contrast
-!HISTORY_MSG_316;W - Gamut - Skin tar/prot
-!HISTORY_MSG_317;W - Gamut - Skin hue
-!HISTORY_MSG_318;W - Contrast - Highlight levels
-!HISTORY_MSG_319;W - Contrast - Highlight range
-!HISTORY_MSG_320;W - Contrast - Shadow range
-!HISTORY_MSG_321;W - Contrast - Shadow levels
-!HISTORY_MSG_322;W - Gamut - Avoid color shift
-!HISTORY_MSG_323;W - ES - Local contrast
-!HISTORY_MSG_324;W - Chroma - Pastel
-!HISTORY_MSG_325;W - Chroma - Saturated
-!HISTORY_MSG_326;W - Chroma - Method
-!HISTORY_MSG_327;W - Contrast - Apply to
-!HISTORY_MSG_328;W - Chroma - Link strength
-!HISTORY_MSG_329;W - Toning - Opacity RG
-!HISTORY_MSG_330;W - Toning - Opacity BY
-!HISTORY_MSG_331;W - Contrast levels - Extra
-!HISTORY_MSG_332;W - Tiling method
-!HISTORY_MSG_333;W - Residual - Shadows
-!HISTORY_MSG_334;W - Residual - Chroma
-!HISTORY_MSG_335;W - Residual - Highlights
-!HISTORY_MSG_336;W - Residual - Highlights threshold
-!HISTORY_MSG_337;W - Residual - Sky hue
-!HISTORY_MSG_338;W - ES - Radius
-!HISTORY_MSG_339;W - ES - Strength
-!HISTORY_MSG_340;W - Strength
-!HISTORY_MSG_341;W - Edge performance
-!HISTORY_MSG_342;W - ES - First level
-!HISTORY_MSG_343;W - Chroma levels
-!HISTORY_MSG_344;W - Meth chroma sl/cur
-!HISTORY_MSG_345;W - ES - Local contrast
-!HISTORY_MSG_346;W - ES - Local contrast method
-!HISTORY_MSG_347;W - Denoise - Level 1
-!HISTORY_MSG_348;W - Denoise - Level 2
-!HISTORY_MSG_349;W - Denoise - Level 3
-!HISTORY_MSG_350;W - ES - Edge detection
-!HISTORY_MSG_351;W - Residual - HH curve
-!HISTORY_MSG_352;W - Background
-!HISTORY_MSG_353;W - ES - Gradient sensitivity
-!HISTORY_MSG_354;W - ES - Enhanced
-!HISTORY_MSG_355;W - ES - Threshold low
-!HISTORY_MSG_356;W - ES - Threshold high
-!HISTORY_MSG_357;W - Denoise - Link with ES
-!HISTORY_MSG_358;W - Gamut - CH
-!HISTORY_MSG_359;Hot/Dead - Threshold
-!HISTORY_MSG_360;TM - Gamma
-!HISTORY_MSG_361;W - Final - Chroma balance
-!HISTORY_MSG_362;W - Residual - Compression method
-!HISTORY_MSG_363;W - Residual - Compression strength
-!HISTORY_MSG_364;W - Final - Contrast balance
-!HISTORY_MSG_365;W - Final - Delta balance
-!HISTORY_MSG_366;W - Residual - Compression gamma
-!HISTORY_MSG_367;W - Final - 'After' contrast curve
-!HISTORY_MSG_368;W - Final - Contrast balance
-!HISTORY_MSG_369;W - Final - Balance method
-!HISTORY_MSG_370;W - Final - Local contrast curve
-!HISTORY_MSG_371;Post-Resize Sharpening
-!HISTORY_MSG_372;PRS USM - Radius
-!HISTORY_MSG_373;PRS USM - Amount
-!HISTORY_MSG_374;PRS USM - Threshold
-!HISTORY_MSG_375;PRS USM - Sharpen only edges
-!HISTORY_MSG_376;PRS USM - Edge detection radius
-!HISTORY_MSG_377;PRS USM - Edge tolerance
-!HISTORY_MSG_378;PRS USM - Halo control
-!HISTORY_MSG_379;PRS USM - Halo control amount
-!HISTORY_MSG_380;PRS - Method
-!HISTORY_MSG_381;PRS RLD - Radius
-!HISTORY_MSG_382;PRS RLD - Amount
-!HISTORY_MSG_383;PRS RLD - Damping
-!HISTORY_MSG_384;PRS RLD - Iterations
-!HISTORY_MSG_385;W - Residual - Color Balance
-!HISTORY_MSG_386;W - Residual - CB green high
-!HISTORY_MSG_387;W - Residual - CB blue high
-!HISTORY_MSG_388;W - Residual - CB green mid
-!HISTORY_MSG_389;W - Residual - CB blue mid
-!HISTORY_MSG_390;W - Residual - CB green low
-!HISTORY_MSG_391;W - Residual - CB blue low
-!HISTORY_MSG_392;W - Residual - Color Balance
-!HISTORY_MSG_393;DCP - Look table
-!HISTORY_MSG_394;DCP - Baseline exposure
-!HISTORY_MSG_395;DCP - Base table
-!HISTORY_MSG_396;W - Contrast sub-tool
-!HISTORY_MSG_397;W - Chroma sub-tool
-!HISTORY_MSG_398;W - ES sub-tool
-!HISTORY_MSG_399;W - Residual sub-tool
-!HISTORY_MSG_400;W - Final sub-tool
-!HISTORY_MSG_401;W - Toning sub-tool
-!HISTORY_MSG_402;W - Denoise sub-tool
-!HISTORY_MSG_403;W - ES - Edge sensitivity
-!HISTORY_MSG_404;W - ES - Base amplification
-!HISTORY_MSG_405;W - Denoise - Level 4
-!HISTORY_MSG_406;W - ES - Neighboring pixels
-!HISTORY_MSG_407;Retinex - Method
-!HISTORY_MSG_408;Retinex - Radius
-!HISTORY_MSG_409;Retinex - Contrast
-!HISTORY_MSG_410;Retinex - Offset
-!HISTORY_MSG_411;Retinex - Strength
-!HISTORY_MSG_412;Retinex - Gaussian gradient
-!HISTORY_MSG_413;Retinex - Contrast
-!HISTORY_MSG_414;Retinex - Histogram - Lab
-!HISTORY_MSG_415;Retinex - Transmission
-!HISTORY_MSG_416;Retinex
-!HISTORY_MSG_417;Retinex - Transmission median
-!HISTORY_MSG_418;Retinex - Threshold
-!HISTORY_MSG_419;Retinex - Color space
-!HISTORY_MSG_420;Retinex - Histogram - HSL
-!HISTORY_MSG_421;Retinex - Gamma
-!HISTORY_MSG_422;Retinex - Gamma
-!HISTORY_MSG_423;Retinex - Gamma slope
-!HISTORY_MSG_424;Retinex - HL threshold
-!HISTORY_MSG_425;Retinex - Log base
-!HISTORY_MSG_426;Retinex - Hue equalizer
-!HISTORY_MSG_427;Output rendering intent
-!HISTORY_MSG_428;Monitor rendering intent
-!HISTORY_MSG_429;Retinex - Iterations
-!HISTORY_MSG_430;Retinex - Transmission gradient
-!HISTORY_MSG_431;Retinex - Strength gradient
-!HISTORY_MSG_432;Retinex - M - Highlights
-!HISTORY_MSG_433;Retinex - M - Highlights TW
-!HISTORY_MSG_434;Retinex - M - Shadows
-!HISTORY_MSG_435;Retinex - M - Shadows TW
-!HISTORY_MSG_436;Retinex - M - Radius
-!HISTORY_MSG_437;Retinex - M - Method
-!HISTORY_MSG_438;Retinex - M - Equalizer
-!HISTORY_MSG_439;Retinex - Process
-!HISTORY_MSG_440;CbDL - Method
-!HISTORY_MSG_441;Retinex - Gain transmission
-!HISTORY_MSG_442;Retinex - Scale
-!HISTORY_MSG_443;Output black point compensation
-!HISTORY_MSG_444;WB - Temp bias
-!HISTORY_MSG_445;Raw sub-image
-!HISTORY_MSG_449;PS - ISO adaption
-!HISTORY_MSG_452;PS - Show motion
-!HISTORY_MSG_453;PS - Show mask only
-!HISTORY_MSG_457;PS - Check red/blue
-!HISTORY_MSG_462;PS - Check green
-!HISTORY_MSG_464;PS - Blur motion mask
-!HISTORY_MSG_465;PS - Blur radius
-!HISTORY_MSG_468;PS - Fill holes
-!HISTORY_MSG_469;PS - Median
-!HISTORY_MSG_471;PS - Motion correction
-!HISTORY_MSG_472;PS - Smooth transitions
-!HISTORY_MSG_473;PS - Use LMMSE
-!HISTORY_MSG_474;PS - Equalize
-!HISTORY_MSG_475;PS - Equalize channel
-!HISTORY_MSG_476;CAM02 - Temp out
-!HISTORY_MSG_477;CAM02 - Green out
-!HISTORY_MSG_478;CAM02 - Yb out
-!HISTORY_MSG_479;CAM02 - CAT02 adaptation out
-!HISTORY_MSG_480;CAM02 - Automatic CAT02 out
-!HISTORY_MSG_481;CAM02 - Temp scene
-!HISTORY_MSG_482;CAM02 - Green scene
-!HISTORY_MSG_483;CAM02 - Yb scene
-!HISTORY_MSG_484;CAM02 - Auto Yb scene
-!HISTORY_MSG_485;Lens Correction
-!HISTORY_MSG_486;Lens Correction - Camera
-!HISTORY_MSG_487;Lens Correction - Lens
-!HISTORY_MSG_488;Dynamic Range Compression
-!HISTORY_MSG_489;DRC - Detail
-!HISTORY_MSG_490;DRC - Amount
-!HISTORY_MSG_491;White Balance
-!HISTORY_MSG_492;RGB Curves
-!HISTORY_MSG_493;L*a*b* Adjustments
-!HISTORY_MSG_CLAMPOOG;Clip out-of-gamut colors
-!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_AB;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_CHANNEL;CT - Channel
-!HISTORY_MSG_COLORTONING_LABREGION_CHROMATICITYMASK;CT - region C mask
-!HISTORY_MSG_COLORTONING_LABREGION_HUEMASK;CT - H mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESS;CT - Lightness
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESSMASK;CT - L mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIST;CT - List
-!HISTORY_MSG_COLORTONING_LABREGION_MASKBLUR;CT - region mask blur
-!HISTORY_MSG_COLORTONING_LABREGION_OFFSET;CT - region offset
-!HISTORY_MSG_COLORTONING_LABREGION_POWER;CT - region power
-!HISTORY_MSG_COLORTONING_LABREGION_SATURATION;CT - Saturation
-!HISTORY_MSG_COLORTONING_LABREGION_SHOWMASK;CT - region show mask
-!HISTORY_MSG_COLORTONING_LABREGION_SLOPE;CT - region slope
-!HISTORY_MSG_DEHAZE_DEPTH;Dehaze - Depth
-!HISTORY_MSG_DEHAZE_ENABLED;Haze Removal
-!HISTORY_MSG_DEHAZE_SHOW_DEPTH_MAP;Dehaze - Show depth map
-!HISTORY_MSG_DEHAZE_STRENGTH;Dehaze - Strength
-!HISTORY_MSG_DUALDEMOSAIC_AUTO_CONTRAST;Dual demosaic - Auto threshold
-!HISTORY_MSG_DUALDEMOSAIC_CONTRAST;Dual demosaic - Contrast threshold
-!HISTORY_MSG_HISTMATCHING;Auto-matched tone curve
-!HISTORY_MSG_ICM_OUTPUT_PRIMARIES;Output - Primaries
-!HISTORY_MSG_ICM_OUTPUT_TEMP;Output - ICC-v4 illuminant D
-!HISTORY_MSG_ICM_OUTPUT_TYPE;Output - Type
-!HISTORY_MSG_ICM_WORKING_GAMMA;Working - Gamma
-!HISTORY_MSG_ICM_WORKING_SLOPE;Working - Slope
-!HISTORY_MSG_ICM_WORKING_TRC_METHOD;Working - TRC method
-!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
-!HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness
-!HISTORY_MSG_LOCALCONTRAST_ENABLED;Local Contrast
-!HISTORY_MSG_LOCALCONTRAST_LIGHTNESS;Local Contrast - Lightness
-!HISTORY_MSG_LOCALCONTRAST_RADIUS;Local Contrast - Radius
-!HISTORY_MSG_METADATA_MODE;Metadata copy mode
-!HISTORY_MSG_MICROCONTRAST_CONTRAST;Microcontrast - Contrast threshold
-!HISTORY_MSG_PIXELSHIFT_DEMOSAIC;PS - Demosaic method for motion
-!HISTORY_MSG_PREPROCESS_LINEDENOISE_DIRECTION;Line noise filter direction
-!HISTORY_MSG_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!HISTORY_MSG_PRSHARPEN_CONTRAST;PRS - Contrast threshold
-!HISTORY_MSG_RAWCACORR_AUTOIT;Raw CA Correction - Iterations
-!HISTORY_MSG_RAWCACORR_COLORSHIFT;Raw CA Correction - Avoid color shift
-!HISTORY_MSG_RAW_BORDER;Raw border
-!HISTORY_MSG_RESIZE_ALLOWUPSCALING;Resize - Allow upscaling
-!HISTORY_MSG_SHARPENING_BLUR;Sharpening - Blur radius
-!HISTORY_MSG_SHARPENING_CONTRAST;Sharpening - Contrast threshold
-!HISTORY_MSG_SH_COLORSPACE;S/H - Colorspace
-!HISTORY_MSG_SOFTLIGHT_ENABLED;Soft light
-!HISTORY_MSG_SOFTLIGHT_STRENGTH;Soft light - Strength
-!HISTORY_MSG_TM_FATTAL_ANCHOR;DRC - Anchor
-!HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s
-!ICCPROFCREATOR_COPYRIGHT;Copyright:
-!ICCPROFCREATOR_COPYRIGHT_RESET_TOOLTIP;Reset to the default copyright, granted to "RawTherapee, CC0"
-!ICCPROFCREATOR_CUSTOM;Custom
-!ICCPROFCREATOR_DESCRIPTION;Description:
-!ICCPROFCREATOR_DESCRIPTION_ADDPARAM;Append gamma and slope values to the description
-!ICCPROFCREATOR_DESCRIPTION_TOOLTIP;Leave empty to set the default description.
-!ICCPROFCREATOR_GAMMA;Gamma
-!ICCPROFCREATOR_ICCVERSION;ICC version:
-!ICCPROFCREATOR_ILL;Illuminant:
-!ICCPROFCREATOR_ILL_41;D41
-!ICCPROFCREATOR_ILL_50;D50
-!ICCPROFCREATOR_ILL_55;D55
-!ICCPROFCREATOR_ILL_60;D60
-!ICCPROFCREATOR_ILL_65;D65
-!ICCPROFCREATOR_ILL_80;D80
-!ICCPROFCREATOR_ILL_DEF;Default
-!ICCPROFCREATOR_ILL_INC;StdA 2856K
-!ICCPROFCREATOR_ILL_TOOLTIP;You can only set the illuminant for ICC v4 profiles.
-!ICCPROFCREATOR_PRIMARIES;Primaries:
-!ICCPROFCREATOR_PRIM_ACESP0;ACES AP0
-!ICCPROFCREATOR_PRIM_ACESP1;ACES AP1
-!ICCPROFCREATOR_PRIM_ADOBE;Adobe RGB (1998)
-!ICCPROFCREATOR_PRIM_BEST;BestRGB
-!ICCPROFCREATOR_PRIM_BETA;BetaRGB
-!ICCPROFCREATOR_PRIM_BLUX;Blue X
-!ICCPROFCREATOR_PRIM_BLUY;Blue Y
-!ICCPROFCREATOR_PRIM_BRUCE;BruceRGB
-!ICCPROFCREATOR_PRIM_GREX;Green X
-!ICCPROFCREATOR_PRIM_GREY;Green Y
-!ICCPROFCREATOR_PRIM_PROPH;Prophoto
-!ICCPROFCREATOR_PRIM_REC2020;Rec2020
-!ICCPROFCREATOR_PRIM_REDX;Red X
-!ICCPROFCREATOR_PRIM_REDY;Red Y
-!ICCPROFCREATOR_PRIM_SRGB;sRGB
-!ICCPROFCREATOR_PRIM_TOOLTIP;You can only set custom primaries for ICC v4 profiles.
-!ICCPROFCREATOR_PRIM_WIDEG;Widegamut
-!ICCPROFCREATOR_PROF_V2;ICC v2
-!ICCPROFCREATOR_PROF_V4;ICC v4
-!ICCPROFCREATOR_SAVEDIALOG_TITLE;Save ICC profile as...
-!ICCPROFCREATOR_SLOPE;Slope
-!ICCPROFCREATOR_TRC_PRESET;Tone response curve:
-!IPTCPANEL_CATEGORYHINT;Identifies the subject of the image in the opinion of the provider.
-!IPTCPANEL_CITYHINT;Enter the name of the city pictured in this image.
-!IPTCPANEL_COPYRIGHT;Copyright notice
-!IPTCPANEL_COPYRIGHTHINT;Enter a Notice on the current owner of the Copyright for this image, such as ©2008 Jane Doe.
-!IPTCPANEL_COUNTRYHINT;Enter the name of the country pictured in this image.
-!IPTCPANEL_CREATOR;Creator
-!IPTCPANEL_CREATORHINT;Enter the name of the person that created this image.
-!IPTCPANEL_CREATORJOBTITLE;Creator's job title
-!IPTCPANEL_CREATORJOBTITLEHINT;Enter the Job Title of the person listed in the Creator field.
-!IPTCPANEL_DATECREATEDHINT;Enter the Date the image was taken.
-!IPTCPANEL_DESCRIPTION;Description
-!IPTCPANEL_DESCRIPTIONHINT;Enter a "caption" describing the who, what, and why of what is happening in this image, this might include names of people, and/or their role in the action that is taking place within the image.
-!IPTCPANEL_DESCRIPTIONWRITER;Description writer
-!IPTCPANEL_DESCRIPTIONWRITERHINT;Enter the name of the person involved in writing, editing or correcting the description of the image.
-!IPTCPANEL_HEADLINEHINT;Enter a brief publishable synopsis or summary of the contents of the image.
-!IPTCPANEL_INSTRUCTIONSHINT;Enter information about embargoes, or other restrictions not covered by the Copyright field.
-!IPTCPANEL_KEYWORDSHINT;Enter any number of keywords, terms or phrases used to express the subject matter in the image.
-!IPTCPANEL_PROVINCE;Province or state
-!IPTCPANEL_PROVINCEHINT;Enter the name of the province or state pictured in this image.
-!IPTCPANEL_SOURCEHINT;Enter or edit the name of a person or party who has a role in the content supply chain, such as a person or entity from whom you received this image from.
-!IPTCPANEL_SUPPCATEGORIES;Supplemental categories
-!IPTCPANEL_SUPPCATEGORIESHINT;Further refines the subject of the image.
-!IPTCPANEL_TITLEHINT;Enter a short verbal and human readable name for the image, this may be the file name.
-!IPTCPANEL_TRANSREFERENCE;Job ID
-!IPTCPANEL_TRANSREFERENCEHINT;Enter a number or identifier needed for workflow control or tracking.
-!MAIN_BUTTON_FULLSCREEN;Fullscreen
-!MAIN_BUTTON_ICCPROFCREATOR;ICC Profile Creator
-!MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4
-!MAIN_BUTTON_NAVPREV_TOOLTIP;Navigate to the previous image relative to image opened in the Editor.\nShortcut: Shift-F3\n\nTo navigate to the previous image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F3
-!MAIN_BUTTON_NAVSYNC_TOOLTIP;Synchronize the File Browser or Filmstrip with the Editor to reveal the thumbnail of the currently opened image, and clear any active filters.\nShortcut: x\n\nAs above, but without clearing active filters:\nShortcut: y\n(Note that the thumbnail of the opened image will not be shown if filtered out).
-!MAIN_BUTTON_PUTTOQUEUE_TOOLTIP;Put current image to processing queue.\nShortcut: Ctrl+b
-!MAIN_BUTTON_SAVE_TOOLTIP;Save current image.\nShortcut: Ctrl+s\nSave current profile (.pp3).\nShortcut: Ctrl+Shift+s
-!MAIN_BUTTON_SENDTOEDITOR_TOOLTIP;Edit current image in external editor.\nShortcut: Ctrl+e
-!MAIN_BUTTON_SHOWHIDESIDEPANELS_TOOLTIP;Show/hide all side panels.\nShortcut: m
-!MAIN_BUTTON_UNFULLSCREEN;Exit fullscreen
-!MAIN_FRAME_BATCHQUEUE_TOOLTIP;Processing queue.\nShortcut: Ctrl-F3
-!MAIN_FRAME_EDITOR;Editor
-!MAIN_FRAME_EDITOR_TOOLTIP;Editor.\nShortcut: Ctrl-F4
-!MAIN_FRAME_FILEBROWSER_TOOLTIP;File browser.\nShortcut: Ctrl-F2
-!MAIN_FRAME_PLACES_DEL;Remove
-!MAIN_MSG_EMPTYFILENAME;Filename unspecified!
-!MAIN_MSG_IMAGEUNPROCESSED;This command requires all selected images to be queue-processed first.
-!MAIN_MSG_NAVIGATOR;Navigator
-!MAIN_MSG_OPERATIONCANCELLED;Operation cancelled
-!MAIN_MSG_PATHDOESNTEXIST;The path\n\n%1\n\ndoes not exist. Please set a correct path in Preferences.
-!MAIN_MSG_SETPATHFIRST;You first have to set a target path in Preferences in order to use this function!
-!MAIN_MSG_TOOMANYOPENEDITORS;Too many open editors.\nPlease close an editor to continue.
-!MAIN_MSG_WRITEFAILED;Failed to write\n"%1"\n\nMake sure that the folder exists and that you have write permission to it.
-!MAIN_TAB_ADVANCED;Advanced
-!MAIN_TAB_ADVANCED_TOOLTIP;Shortcut: Alt-w
-!MAIN_TAB_COLOR_TOOLTIP;Shortcut: Alt-c
-!MAIN_TAB_DETAIL_TOOLTIP;Shortcut: Alt-d
-!MAIN_TAB_EXPORT; Fast Export
-!MAIN_TAB_EXPOSURE_TOOLTIP;Shortcut: Alt-e
-!MAIN_TAB_FAVORITES;Favorites
-!MAIN_TAB_FAVORITES_TOOLTIP;Shortcut: Alt-u
-!MAIN_TAB_INSPECT; Inspect
-!MAIN_TAB_METADATA_TOOLTIP;Shortcut: Alt-m
-!MAIN_TAB_RAW;Raw
-!MAIN_TAB_RAW_TOOLTIP;Shortcut: Alt-r
-!MAIN_TAB_TRANSFORM_TOOLTIP;Shortcut: Alt-t
-!MAIN_TOOLTIP_BACKCOLOR0;Background color of the preview: theme-based\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR1;Background color of the preview: black\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR2;Background color of the preview: white\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR3;Background color of the preview: middle grey\nShortcut: 9
-!MAIN_TOOLTIP_BEFOREAFTERLOCK;Lock / Unlock the Before view\n\nLock: keep the Before view unchanged.\nUseful to evaluate the cumulative effect of multiple tools.\nAdditionally, comparisons can be made to any state in the History.\n\nUnlock: the Before view will follow the After view one step behind, showing the image before the effect of the currently used tool.
-!MAIN_TOOLTIP_PREVIEWB;Preview the blue channel.\nShortcut: b
-!MAIN_TOOLTIP_PREVIEWFOCUSMASK;Preview the focus mask.\nShortcut: Shift-f\n\nMore accurate on images with shallow depth of field, low noise and at higher zoom levels.\nZoom out to 10-30% to improve detection accuracy on noisy images.
-!MAIN_TOOLTIP_PREVIEWG;Preview the green channel.\nShortcut: g
-!MAIN_TOOLTIP_PREVIEWL;Preview the luminosity.\nShortcut: v\n\n0.299*R + 0.587*G + 0.114*B
-!MAIN_TOOLTIP_PREVIEWR;Preview the red channel.\nShortcut: r
-!MAIN_TOOLTIP_PREVIEWSHARPMASK;Preview the sharpening contrast mask.\nShortcut: p\n\nOnly works when sharpening is enabled and zoom >= 100%.
-!MAIN_TOOLTIP_SHOWHIDELP1;Show/Hide the left panel.\nShortcut: l
-!MAIN_TOOLTIP_SHOWHIDERP1;Show/Hide the right panel.\nShortcut: Alt-l
-!MAIN_TOOLTIP_SHOWHIDETP1;Show/Hide the top panel.\nShortcut: Shift-l
-!MAIN_TOOLTIP_THRESHOLD;Threshold
-!MAIN_TOOLTIP_TOGGLE;Toggle the Before/After view.\nShortcut: Shift-b
-!MONITOR_PROFILE_SYSTEM;System default
-!NAVIGATOR_B;B:
-!NAVIGATOR_G;G:
-!NAVIGATOR_H;H:
-!NAVIGATOR_LAB_A;a*:
-!NAVIGATOR_LAB_B;b*:
-!NAVIGATOR_LAB_L;L*:
-!NAVIGATOR_NA; --
-!NAVIGATOR_R;R:
-!NAVIGATOR_S;S:
-!NAVIGATOR_V;V:
-!NAVIGATOR_XY_FULL;Width: %1, Height: %2
-!NAVIGATOR_XY_NA;x: --, y: --
-!OPTIONS_BUNDLED_MISSING;The bundled profile "%1" could not be found!\n\nYour installation could be damaged.\n\nDefault internal values will be used instead.
-!OPTIONS_DEFIMG_MISSING;The default profile for non-raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!OPTIONS_DEFRAW_MISSING;The default profile for raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!PARTIALPASTE_ADVANCEDGROUP;Advanced Settings
-!PARTIALPASTE_CHANNELMIXER;Channel mixer
-!PARTIALPASTE_CHANNELMIXERBW;Black-and-white
-!PARTIALPASTE_COLORAPP;CIECAM02
-!PARTIALPASTE_COLORTONING;Color toning
-!PARTIALPASTE_COMMONTRANSFORMPARAMS;Auto-fill
-!PARTIALPASTE_DARKFRAMEAUTOSELECT;Dark-frame auto-selection
-!PARTIALPASTE_DARKFRAMEFILE;Dark-frame file
-!PARTIALPASTE_DEFRINGE;Defringe
-!PARTIALPASTE_DEHAZE;Haze removal
-!PARTIALPASTE_DETAILGROUP;Detail Settings
-!PARTIALPASTE_DIRPYRDENOISE;Noise reduction
-!PARTIALPASTE_DIRPYREQUALIZER;Contrast by detail levels
-!PARTIALPASTE_EPD;Tone mapping
-!PARTIALPASTE_EQUALIZER;Wavelet levels
-!PARTIALPASTE_EVERYTHING;Everything
-!PARTIALPASTE_FILMSIMULATION;Film simulation
-!PARTIALPASTE_FLATFIELDAUTOSELECT;Flat-field auto-selection
-!PARTIALPASTE_FLATFIELDBLURRADIUS;Flat-field blur radius
-!PARTIALPASTE_FLATFIELDBLURTYPE;Flat-field blur type
-!PARTIALPASTE_FLATFIELDCLIPCONTROL;Flat-field clip control
-!PARTIALPASTE_FLATFIELDFILE;Flat-field file
-!PARTIALPASTE_GRADIENT;Graduated filter
-!PARTIALPASTE_HSVEQUALIZER;HSV equalizer
-!PARTIALPASTE_IMPULSEDENOISE;Impulse noise reduction
-!PARTIALPASTE_LABCURVE;L*a*b* adjustments
-!PARTIALPASTE_LENSPROFILE;Profiled lens correction
-!PARTIALPASTE_LOCALCONTRAST;Local contrast
-!PARTIALPASTE_METADATA;Metadata mode
-!PARTIALPASTE_PCVIGNETTE;Vignette filter
-!PARTIALPASTE_PERSPECTIVE;Perspective
-!PARTIALPASTE_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!PARTIALPASTE_PREPROCESS_GREENEQUIL;Green equilibration
-!PARTIALPASTE_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!PARTIALPASTE_PREPROCESS_LINEDENOISE;Line noise filter
-!PARTIALPASTE_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!PARTIALPASTE_PRSHARPENING;Post-resize sharpening
-!PARTIALPASTE_RAWCACORR_AUTO;CA auto-correction
-!PARTIALPASTE_RAWCACORR_AVOIDCOLORSHIFT;CA avoid color shift
-!PARTIALPASTE_RAWCACORR_CAREDBLUE;CA red & blue
-!PARTIALPASTE_RAWEXPOS_BLACK;Black levels
-!PARTIALPASTE_RAWEXPOS_LINEAR;White point correction
-!PARTIALPASTE_RAWGROUP;Raw Settings
-!PARTIALPASTE_RAW_BORDER;Raw border
-!PARTIALPASTE_RAW_DCBENHANCE;DCB enhancement
-!PARTIALPASTE_RAW_DCBITERATIONS;DCB iterations
-!PARTIALPASTE_RAW_DMETHOD;Demosaic method
-!PARTIALPASTE_RAW_FALSECOLOR;False color suppression
-!PARTIALPASTE_RAW_IMAGENUM;Sub-image
-!PARTIALPASTE_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!PARTIALPASTE_RAW_PIXELSHIFT;Pixel Shift
-!PARTIALPASTE_RETINEX;Retinex
-!PARTIALPASTE_RGBCURVES;RGB curves
-!PARTIALPASTE_SHARPENEDGE;Edges
-!PARTIALPASTE_SHARPENMICRO;Microcontrast
-!PARTIALPASTE_SOFTLIGHT;Soft light
-!PARTIALPASTE_TM_FATTAL;Dynamic range compression
-!PARTIALPASTE_VIBRANCE;Vibrance
-!PREFERENCES_ADD;Add
-!PREFERENCES_APPEARANCE;Appearance
-!PREFERENCES_APPEARANCE_COLORPICKERFONT;Color picker font
-!PREFERENCES_APPEARANCE_CROPMASKCOLOR;Crop mask color
-!PREFERENCES_APPEARANCE_MAINFONT;Main font
-!PREFERENCES_APPEARANCE_NAVGUIDECOLOR;Navigator guide color
-!PREFERENCES_APPEARANCE_THEME;Theme
-!PREFERENCES_AUTOMONPROFILE;Use operating system's main monitor color profile
-!PREFERENCES_AUTOSAVE_TP_OPEN;Save tool collapsed/expanded state on exit
-!PREFERENCES_BATCH_PROCESSING;Batch Processing
-!PREFERENCES_BEHADDALL;All to 'Add'
-!PREFERENCES_BEHADDALLHINT;Set all parameters to the Add mode.\nAdjustments of parameters in the batch tool panel will be deltas to the stored values.
-!PREFERENCES_BEHAVIOR;Behavior
-!PREFERENCES_BEHSETALL;All to 'Set'
-!PREFERENCES_BEHSETALLHINT;Set all parameters to the Set mode.\nAdjustments of parameters in the batch tool panel will be absolute, the actual values will be displayed.
-!PREFERENCES_BLACKBODY;Tungsten
-!PREFERENCES_CACHECLEAR;Clear
-!PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
-!PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
-!PREFERENCES_CACHECLEAR_ONLYPROFILES;Clear only cached processing profiles:
-!PREFERENCES_CACHECLEAR_SAFETY;Only files in the cache are cleared. Processing profiles stored alongside the source images are not touched.
-!PREFERENCES_CHUNKSIZES;Tiles per thread
-!PREFERENCES_CHUNKSIZE_RAW_AMAZE;AMaZE demosaic
-!PREFERENCES_CHUNKSIZE_RAW_CA;Raw CA correction
-!PREFERENCES_CHUNKSIZE_RAW_RCD;RCD demosaic
-!PREFERENCES_CHUNKSIZE_RAW_XT;Xtrans demosaic
-!PREFERENCES_CHUNKSIZE_RGB;RGB processing
-!PREFERENCES_CLUTSCACHE;HaldCLUT Cache
-!PREFERENCES_CLUTSCACHE_LABEL;Maximum number of cached CLUTs
-!PREFERENCES_CLUTSDIR;HaldCLUT directory
-!PREFERENCES_CMMBPC;Black point compensation
-!PREFERENCES_CROP;Crop Editing
-!PREFERENCES_CROP_AUTO_FIT;Automatically zoom to fit the crop
-!PREFERENCES_CROP_GUIDES;Guides shown when not editing the crop
-!PREFERENCES_CROP_GUIDES_FRAME;Frame
-!PREFERENCES_CROP_GUIDES_FULL;Original
-!PREFERENCES_CROP_GUIDES_NONE;None
-!PREFERENCES_CURVEBBOXPOS;Position of curve copy & paste buttons
-!PREFERENCES_CURVEBBOXPOS_ABOVE;Above
-!PREFERENCES_CURVEBBOXPOS_BELOW;Below
-!PREFERENCES_CURVEBBOXPOS_LEFT;Left
-!PREFERENCES_CURVEBBOXPOS_RIGHT;Right
-!PREFERENCES_CUSTPROFBUILD;Custom Processing Profile Builder
-!PREFERENCES_CUSTPROFBUILDHINT;Executable (or script) file called when a new initial processing profile should be generated for an image.\n\nThe path of the communication file (*.ini style, a.k.a. "Keyfile") is added as a command line parameter. It contains various parameters required for the scripts and image Exif to allow a rules-based processing profile generation.\n\nWARNING: You are responsible for using double quotes where necessary if you're using paths containing spaces.
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys format
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
-!PREFERENCES_CUSTPROFBUILDPATH;Executable path
-!PREFERENCES_D50;Settings in main menu
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_D55;5500K
-!PREFERENCES_D60;6000K
-!PREFERENCES_D65;6500K
-!PREFERENCES_DARKFRAMEFOUND;Found
-!PREFERENCES_DARKFRAMESHOTS;shots
-!PREFERENCES_DARKFRAMETEMPLATES;templates
-!PREFERENCES_DIRDARKFRAMES;Dark-frames directory
-!PREFERENCES_DIRECTORIES;Directories
-!PREFERENCES_EDITORCMDLINE;Custom command line
-!PREFERENCES_EDITORLAYOUT;Editor layout
-!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_FLATFIELDFOUND;Found
-!PREFERENCES_FLATFIELDSDIR;Flat-fields directory
-!PREFERENCES_FLATFIELDSHOTS;shots
-!PREFERENCES_FLATFIELDTEMPLATES;templates
-!PREFERENCES_FLUOF2;Fluorescent F2
-!PREFERENCES_FLUOF7;Fluorescent F7
-!PREFERENCES_FLUOF11;Fluorescent F11
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY;Output device's Yb luminance (%)
-!PREFERENCES_GREY05;Yb=05 CIE L#30
-!PREFERENCES_GREY10;Yb=10 CIE L#40
-!PREFERENCES_GREY15;Yb=15 CIE L#45
-!PREFERENCES_GREY18;Settings in main menu
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREY23;Yb=23 CIE L#55
-!PREFERENCES_GREY30;Yb=30 CIE L#60
-!PREFERENCES_GREY40;Yb=40 CIE L#70
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram in left panel
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
-!PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
-!PREFERENCES_INSPECT_LABEL;Inspect
-!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
-!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
-!PREFERENCES_INTERNALTHUMBIFUNTOUCHED;Show embedded JPEG thumbnail if raw is unedited
-!PREFERENCES_LANG;Language
-!PREFERENCES_LANGAUTODETECT;Use system language
-!PREFERENCES_MAXRECENTFOLDERS;Maximum number of recent folders
-!PREFERENCES_MENUGROUPEXTPROGS;Group "Open with"
-!PREFERENCES_MENUGROUPFILEOPERATIONS;Group "File operations"
-!PREFERENCES_MENUGROUPLABEL;Group "Color label"
-!PREFERENCES_MENUGROUPPROFILEOPERATIONS;Group "Processing profile operations"
-!PREFERENCES_MENUGROUPRANK;Group "Rank"
-!PREFERENCES_MENUOPTIONS;Context Menu Options
-!PREFERENCES_METADATA;Metadata
-!PREFERENCES_MONINTENT;Default rendering intent
-!PREFERENCES_MONITOR;Monitor
-!PREFERENCES_MONPROFILE;Default color profile
-!PREFERENCES_MONPROFILE_WARNOSX;Due to MacOS limitations, only sRGB is supported.
-!PREFERENCES_MULTITAB;Multiple Editor Tabs Mode
-!PREFERENCES_MULTITABDUALMON;Multiple Editor Tabs In Own Window Mode
-!PREFERENCES_NAVIGATIONFRAME;Navigation
-!PREFERENCES_OVERLAY_FILENAMES;Overlay filenames on thumbnails in the file browser
-!PREFERENCES_OVERLAY_FILENAMES_FILMSTRIP;Overlay filenames on thumbnails in the editor pannel
-!PREFERENCES_OVERWRITEOUTPUTFILE;Overwrite existing output files
-!PREFERENCES_PANFACTORLABEL;Pan rate amplification
-!PREFERENCES_PARSEDEXTDOWNHINT;Move selected extension down in the list.
-!PREFERENCES_PARSEDEXTUPHINT;Move selected extension up in the list.
-!PREFERENCES_PERFORMANCE_MEASURE;Measure
-!PREFERENCES_PERFORMANCE_MEASURE_HINT;Logs processing times in console
-!PREFERENCES_PERFORMANCE_THREADS;Threads
-!PREFERENCES_PERFORMANCE_THREADS_LABEL;Maximum number of threads for Noise Reduction and Wavelet Levels (0 = Automatic)
-!PREFERENCES_PREVDEMO;Preview Demosaic Method
-!PREFERENCES_PREVDEMO_FAST;Fast
-!PREFERENCES_PREVDEMO_LABEL;Demosaicing method used for the preview at <100% zoom:
-!PREFERENCES_PREVDEMO_SIDECAR;As in PP3
-!PREFERENCES_PRINTER;Printer (Soft-Proofing)
-!PREFERENCES_PROFILESAVEBOTH;Save processing profile both to the cache and next to the input file
-!PREFERENCES_PROFILESAVELOCATION;Processing profile saving location
-!PREFERENCES_PROFILE_NONE;None
-!PREFERENCES_PROPERTY;Property
-!PREFERENCES_PRTINTENT;Rendering intent
-!PREFERENCES_PRTPROFILE;Color profile
-!PREFERENCES_REMEMBERZOOMPAN;Remember zoom % and pan offset
-!PREFERENCES_REMEMBERZOOMPAN_TOOLTIP;Remember the zoom % and pan offset of the current image when opening a new image.\n\nThis option only works in "Single Editor Tab Mode" and when "Demosaicing method used for the preview at <100% zoom" is set to "As in PP3".
-!PREFERENCES_SAVE_TP_OPEN_NOW;Save tool collapsed/expanded state now
-!PREFERENCES_SERIALIZE_TIFF_READ;TIFF Read Settings
-!PREFERENCES_SERIALIZE_TIFF_READ_LABEL;Serialize reading of TIFF files
-!PREFERENCES_SERIALIZE_TIFF_READ_TOOLTIP;Enabling this option when working with folders containing uncompressed TIFF files can increase performance of thumbnail generation.
-!PREFERENCES_SET;Set
-!PREFERENCES_SHOWEXPOSURECOMPENSATION;Append exposure compensation
-!PREFERENCES_SHOWFILMSTRIPTOOLBAR;Show Filmstrip toolbar
-!PREFERENCES_SINGLETAB;Single Editor Tab Mode
-!PREFERENCES_SINGLETABVERTAB;Single Editor Tab Mode, Vertical Tabs
-!PREFERENCES_SND_BATCHQUEUEDONE;Queue processing done
-!PREFERENCES_SND_HELP;Enter a full file path to set a sound, or leave blank for no sound.\nFor system sounds on Windows use "SystemDefault", "SystemAsterisk" etc., and on Linux use "complete", "window-attention" etc.
-!PREFERENCES_SND_LNGEDITPROCDONE;Editor processing done
-!PREFERENCES_SND_THRESHOLDSECS;After seconds
-!PREFERENCES_TAB_DYNAMICPROFILE;Dynamic Profile Rules
-!PREFERENCES_TAB_PERFORMANCE;Performance
-!PREFERENCES_TAB_SOUND;Sounds
-!PREFERENCES_THUMBNAIL_INSPECTOR_JPEG;Embedded JPEG preview
-!PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TP_LABEL;Tool panel:
-!PREFERENCES_TP_VSCROLLBAR;Hide vertical scrollbar
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
-!PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-!PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
-!PREFERENCES_WORKFLOW;Layout
-!PROFILEPANEL_COPYPPASTE;Parameters to copy
-!PROFILEPANEL_GLOBALPROFILES;Bundled profiles
-!PROFILEPANEL_LOADPPASTE;Parameters to load
-!PROFILEPANEL_MODE_TIP;Processing profile fill mode.\n\nButton pressed: partial profiles will be converted to full profiles; the missing values will be replaced with hard-coded defaults.\n\nButton released: profiles will be applied as they are, altering only those values which they contain.
-!PROFILEPANEL_MYPROFILES;My profiles
-!PROFILEPANEL_PASTEPPASTE;Parameters to paste
-!PROFILEPANEL_PDYNAMIC;Dynamic
-!PROFILEPANEL_PINTERNAL;Neutral
-!PROFILEPANEL_SAVEPPASTE;Parameters to save
-!PROGRESSBAR_DECODING;Decoding...
-!PROGRESSBAR_GREENEQUIL;Green equilibration...
-!PROGRESSBAR_HLREC;Highlight reconstruction...
-!PROGRESSBAR_HOTDEADPIXELFILTER;Hot/dead pixel filter...
-!PROGRESSBAR_LINEDENOISE;Line noise filter...
-!PROGRESSBAR_LOADINGTHUMBS;Loading thumbnails...
-!PROGRESSBAR_NOIMAGES;No images found
-!PROGRESSBAR_PROCESSING_PROFILESAVED;Processing profile saved
-!PROGRESSBAR_RAWCACORR;Raw CA correction...
-!PROGRESSBAR_SNAPSHOT_ADDED;Snapshot added
-!PROGRESSDLG_PROFILECHANGEDINBROWSER;Processing profile changed in browser
-!QINFO_FRAMECOUNT;%2 frames
-!QINFO_HDR;HDR / %2 frame(s)
-!QINFO_PIXELSHIFT;Pixel Shift / %2 frame(s)
-!SAMPLEFORMAT_0;Unknown data format
-!SAMPLEFORMAT_1;8-bit unsigned
-!SAMPLEFORMAT_2;16-bit unsigned
-!SAMPLEFORMAT_4;24-bit LogLuv
-!SAMPLEFORMAT_8;32-bit LogLuv
-!SAMPLEFORMAT_16;16-bit floating-point
-!SAMPLEFORMAT_32;24-bit floating-point
-!SAMPLEFORMAT_64;32-bit floating-point
-!SAVEDLG_AUTOSUFFIX;Automatically add a suffix if the file already exists
-!SAVEDLG_FILEFORMAT_FLOAT; floating-point
-!SAVEDLG_FORCEFORMATOPTS;Force saving options
-!SAVEDLG_SUBSAMP;Subsampling
-!SAVEDLG_SUBSAMP_1;Best compression
-!SAVEDLG_SUBSAMP_2;Balanced
-!SAVEDLG_SUBSAMP_3;Best quality
-!SAVEDLG_SUBSAMP_TOOLTIP;Best compression:\nJ:a:b 4:2:0\nh/v 2/2\nChroma halved horizontally and vertically.\n\nBalanced:\nJ:a:b 4:2:2\nh/v 2/1\nChroma halved horizontally.\n\nBest quality:\nJ:a:b 4:4:4\nh/v 1/1\nNo chroma subsampling.
-!SAVEDLG_TIFFUNCOMPRESSED;Uncompressed TIFF
-!SAVEDLG_WARNFILENAME;File will be named
-!SHCSELECTOR_TOOLTIP;Click right mouse button to reset the position of those 3 sliders.
-!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
-!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!THRESHOLDSELECTOR_B;Bottom
-!THRESHOLDSELECTOR_BL;Bottom-left
-!THRESHOLDSELECTOR_BR;Bottom-right
-!THRESHOLDSELECTOR_HINT;Hold the Shift key to move individual control points.
-!THRESHOLDSELECTOR_T;Top
-!THRESHOLDSELECTOR_TL;Top-left
-!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
-!TP_BWMIX_ALGO;Algorithm OYCPM
-!TP_BWMIX_ALGO_LI;Linear
-!TP_BWMIX_ALGO_SP;Special effects
-!TP_BWMIX_ALGO_TOOLTIP;Linear: will produce a normal linear response.\nSpecial effects: will produce special effects by mixing channels non-linearly.
-!TP_BWMIX_AUTOCH;Auto
-!TP_BWMIX_CC_ENABLED;Adjust complementary color
-!TP_BWMIX_CC_TOOLTIP;Enable to allow automatic adjustment of complementary colors in ROYGCBPM mode.
-!TP_BWMIX_CHANNEL;Luminance equalizer
-!TP_BWMIX_CURVEEDITOR1;'Before' curve
-!TP_BWMIX_CURVEEDITOR2;'After' curve
-!TP_BWMIX_CURVEEDITOR_AFTER_TOOLTIP;Tone curve, after B&W conversion, at the end of treatment.
-!TP_BWMIX_CURVEEDITOR_BEFORE_TOOLTIP;Tone curve, just before B&W conversion.\nMay take into account the color components.
-!TP_BWMIX_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H).\nPay attention to extreme values as they may cause artifacts.
-!TP_BWMIX_FILTER;Color Filter
-!TP_BWMIX_FILTER_BLUE;Blue
-!TP_BWMIX_FILTER_BLUEGREEN;Blue-Green
-!TP_BWMIX_FILTER_GREEN;Green
-!TP_BWMIX_FILTER_GREENYELLOW;Green-Yellow
-!TP_BWMIX_FILTER_NONE;None
-!TP_BWMIX_FILTER_PURPLE;Purple
-!TP_BWMIX_FILTER_RED;Red
-!TP_BWMIX_FILTER_REDYELLOW;Red-Yellow
-!TP_BWMIX_FILTER_TOOLTIP;The color filter simulates shots taken with a colored filter placed in front of the lens. Colored filters reduce the transmission of specific color ranges and therefore affect their lightness. E.g. a red filter darkens blue skies.
-!TP_BWMIX_FILTER_YELLOW;Yellow
-!TP_BWMIX_GAMMA;Gamma Correction
-!TP_BWMIX_GAM_TOOLTIP;Correct gamma for each RGB channel.
-!TP_BWMIX_LABEL;Black-and-White
-!TP_BWMIX_MET;Method
-!TP_BWMIX_MET_CHANMIX;Channel Mixer
-!TP_BWMIX_MET_DESAT;Desaturation
-!TP_BWMIX_MET_LUMEQUAL;Luminance Equalizer
-!TP_BWMIX_MIXC;Channel Mixer
-!TP_BWMIX_NEUTRAL;Reset
-!TP_BWMIX_RGBLABEL;R: %1%% G: %2%% B: %3%% Total: %4%%
-!TP_BWMIX_RGBLABEL_HINT;Final RGB factors that take care of all the mixer options.\n"Total" displays the sum of the RGB values:\n- always 100% in relative mode\n- higher (lighter) or lower (darker) than 100% in absolute mode.
-!TP_BWMIX_RGB_TOOLTIP;Mix the RGB channels. Use presets for guidance.\nPay attention to negative values that may cause artifacts or erratic behavior.
-!TP_BWMIX_SETTING;Presets
-!TP_BWMIX_SETTING_TOOLTIP;Different presets (film, landscape, etc.) or manual Channel Mixer settings.
-!TP_BWMIX_SET_HIGHCONTAST;High contrast
-!TP_BWMIX_SET_HIGHSENSIT;High Sensitivity
-!TP_BWMIX_SET_HYPERPANCHRO;Hyper Panchromatic
-!TP_BWMIX_SET_INFRARED;Infrared
-!TP_BWMIX_SET_LANDSCAPE;Landscape
-!TP_BWMIX_SET_LOWSENSIT;Low Sensitivity
-!TP_BWMIX_SET_LUMINANCE;Luminance
-!TP_BWMIX_SET_NORMCONTAST;Normal Contrast
-!TP_BWMIX_SET_ORTHOCHRO;Orthochromatic
-!TP_BWMIX_SET_PANCHRO;Panchromatic
-!TP_BWMIX_SET_PORTRAIT;Portrait
-!TP_BWMIX_SET_RGBABS;Absolute RGB
-!TP_BWMIX_SET_RGBREL;Relative RGB
-!TP_BWMIX_SET_ROYGCBPMABS;Absolute ROYGCBPM
-!TP_BWMIX_SET_ROYGCBPMREL;Relative ROYGCBPM
-!TP_BWMIX_TCMODE_FILMLIKE;B&W Film-like
-!TP_BWMIX_TCMODE_SATANDVALBLENDING;B&W Saturation and Value Blending
-!TP_BWMIX_TCMODE_STANDARD;B&W Standard
-!TP_BWMIX_TCMODE_WEIGHTEDSTD;B&W Weighted Standard
-!TP_BWMIX_VAL;L
-!TP_CBDL_AFT;After Black-and-White
-!TP_CBDL_BEF;Before Black-and-White
-!TP_CBDL_METHOD;Process located
-!TP_CBDL_METHOD_TOOLTIP;Choose whether the Contrast by Detail Levels tool is to be positioned after the Black-and-White tool, which makes it work in L*a*b* space, or before it, which makes it work in RGB space.
-!TP_CHROMATABERR_LABEL;Chromatic Aberration
-!TP_COLORAPP_ABSOLUTELUMINANCE;Absolute luminance
-!TP_COLORAPP_ALGO;Algorithm
-!TP_COLORAPP_ALGO_ALL;All
-!TP_COLORAPP_ALGO_JC;Lightness + Chroma (JC)
-!TP_COLORAPP_ALGO_JS;Lightness + Saturation (JS)
-!TP_COLORAPP_ALGO_QM;Brightness + Colorfulness (QM)
-!TP_COLORAPP_ALGO_TOOLTIP;Lets you choose between parameter subsets or all parameters.
-!TP_COLORAPP_BADPIXSL;Hot/bad pixel filter
-!TP_COLORAPP_BADPIXSL_TOOLTIP;Suppression of hot/bad (brightly colored) pixels.\n0 = No effect\n1 = Median\n2 = Gaussian.\nAlternatively, adjust the image to avoid very dark shadows.\n\nThese artifacts are due to limitations of CIECAM02.
-!TP_COLORAPP_BRIGHT;Brightness (Q)
-!TP_COLORAPP_BRIGHT_TOOLTIP;Brightness in CIECAM02 takes into account the white's luminosity and differs from L*a*b* and RGB brightness.
-!TP_COLORAPP_CAT02ADAPTATION_TOOLTIP;When setting manually, values above 65 are recommended.
-!TP_COLORAPP_CHROMA;Chroma (C)
-!TP_COLORAPP_CHROMA_M;Colorfulness (M)
-!TP_COLORAPP_CHROMA_M_TOOLTIP;Colorfulness in CIECAM02 differs from L*a*b* and RGB colorfulness.
-!TP_COLORAPP_CHROMA_S;Saturation (S)
-!TP_COLORAPP_CHROMA_S_TOOLTIP;Saturation in CIECAM02 differs from L*a*b* and RGB saturation.
-!TP_COLORAPP_CHROMA_TOOLTIP;Chroma in CIECAM02 differs from L*a*b* and RGB chroma.
-!TP_COLORAPP_CIECAT_DEGREE;CAT02 adaptation
-!TP_COLORAPP_CONTRAST;Contrast (J)
-!TP_COLORAPP_CONTRAST_Q;Contrast (Q)
-!TP_COLORAPP_CONTRAST_Q_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CONTRAST_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CURVEEDITOR1;Tone curve 1
-!TP_COLORAPP_CURVEEDITOR1_TOOLTIP;Shows the histogram of L* (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of J or Q after CIECAM02.\n\nJ and Q are not shown in the main histogram panel.\n\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_CURVEEDITOR2;Tone curve 2
-!TP_COLORAPP_CURVEEDITOR2_TOOLTIP;Same usage as with the second exposure tone curve.
-!TP_COLORAPP_CURVEEDITOR3;Color curve
-!TP_COLORAPP_CURVEEDITOR3_TOOLTIP;Adjust either chroma, saturation or colorfulness.\n\nShows the histogram of chromaticity (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of C, s or M after CIECAM02.\n\nC, s and M are not shown in the main histogram panel.\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_DATACIE;CIECAM02 output histograms in curves
-!TP_COLORAPP_DATACIE_TOOLTIP;When enabled, histograms in CIECAM02 curves show approximate values/ranges for J or Q, and C, s or M after the CIECAM02 adjustments.\nThis selection does not impact the main histogram panel.\n\nWhen disabled, histograms in CIECAM02 curves show L*a*b* values before CIECAM02 adjustments.
-!TP_COLORAPP_FREE;Free temp+green + CAT02 + [output]
-!TP_COLORAPP_GAMUT;Gamut control (L*a*b*)
-!TP_COLORAPP_GAMUT_TOOLTIP;Allow gamut control in L*a*b* mode.
-!TP_COLORAPP_HUE;Hue (h)
-!TP_COLORAPP_HUE_TOOLTIP;Hue (h) - angle between 0° and 360°.
-!TP_COLORAPP_LABEL;CIE Color Appearance Model 2002
-!TP_COLORAPP_LABEL_CAM02;Image Adjustments
-!TP_COLORAPP_LABEL_SCENE;Scene Conditions
-!TP_COLORAPP_LABEL_VIEWING;Viewing Conditions
-!TP_COLORAPP_LIGHT;Lightness (J)
-!TP_COLORAPP_LIGHT_TOOLTIP;Lightness in CIECAM02 differs from L*a*b* and RGB lightness.
-!TP_COLORAPP_MEANLUMINANCE;Mean luminance (Yb%)
-!TP_COLORAPP_MODEL;WP Model
-!TP_COLORAPP_MODEL_TOOLTIP;White-Point Model.\n\nWB [RT] + [output]: RT's white balance is used for the scene, CIECAM02 is set to D50, and the output device's white balance is set in Viewing Conditions.\n\nWB [RT+CAT02] + [output]: RT's white balance settings are used by CAT02 and the output device's white balance is set in Viewing Conditions.\n\nFree temp+green + CAT02 + [output]: temp and green are selected by the user, the output device's white balance is set in Viewing Conditions.
-!TP_COLORAPP_NEUTRAL;Reset
-!TP_COLORAPP_NEUTRAL_TIP;Reset all sliders checkbox and curves to their default values
-!TP_COLORAPP_RSTPRO;Red & skin-tones protection
-!TP_COLORAPP_RSTPRO_TOOLTIP;Red & skin-tones protection affects both sliders and curves.
-!TP_COLORAPP_SURROUND;Surround
-!TP_COLORAPP_SURROUND_AVER;Average
-!TP_COLORAPP_SURROUND_DARK;Dark
-!TP_COLORAPP_SURROUND_DIM;Dim
-!TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
-!TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\nAverage: Average light environment (standard). The image will not change.\n\nDim: Dim environment (TV). The image will become slighty dark.\n\nDark: Dark environment (projector). The image will become more dark.\n\nExtremly Dark: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
-!TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
-!TP_COLORAPP_TCMODE_CHROMA;Chroma
-!TP_COLORAPP_TCMODE_COLORF;Colorfulness
-!TP_COLORAPP_TCMODE_LABEL1;Curve mode 1
-!TP_COLORAPP_TCMODE_LABEL2;Curve mode 2
-!TP_COLORAPP_TCMODE_LABEL3;Curve chroma mode
-!TP_COLORAPP_TCMODE_LIGHTNESS;Lightness
-!TP_COLORAPP_TCMODE_SATUR;Saturation
-!TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD50 temp=5003\nD55 temp=5503\nD65 temp=6504\nD75 temp=7504
-!TP_COLORAPP_TONECIE;Tone mapping using CIECAM02
-!TP_COLORAPP_TONECIE_TOOLTIP;If this option is disabled, tone mapping is done in L*a*b* space.\nIf this option is enabled, tone mapping is done using CIECAM02.\nThe Tone Mapping tool must be enabled for this setting to take effect.
-!TP_COLORAPP_VIEWING_ABSOLUTELUMINANCE_TOOLTIP;Absolute luminance of the viewing environment\n(usually 16 cd/m²).
-!TP_COLORAPP_WBCAM;WB [RT+CAT02] + [output]
-!TP_COLORAPP_WBRT;WB [RT] + [output]
-!TP_COLORTONING_AB;o C/L
-!TP_COLORTONING_AUTOSAT;Automatic
-!TP_COLORTONING_BALANCE;Balance
-!TP_COLORTONING_BY;o C/L
-!TP_COLORTONING_CHROMAC;Opacity
-!TP_COLORTONING_COLOR;Color
-!TP_COLORTONING_CURVEEDITOR_CL_TOOLTIP;Chroma opacity as a function of luminance oC=f(L)
-!TP_COLORTONING_HIGHLIGHT;Highlights
-!TP_COLORTONING_HUE;Hue
-!TP_COLORTONING_LAB;L*a*b* blending
-!TP_COLORTONING_LABEL;Color Toning
-!TP_COLORTONING_LABGRID;L*a*b* color correction grid
-!TP_COLORTONING_LABGRID_VALUES;HL: a=%1 b=%2\nS: a=%3 b=%4
-!TP_COLORTONING_LABREGIONS;Color correction regions
-!TP_COLORTONING_LABREGION_ABVALUES;a=%1 b=%2
-!TP_COLORTONING_LABREGION_CHANNEL;Channel
-!TP_COLORTONING_LABREGION_CHANNEL_ALL;All
-!TP_COLORTONING_LABREGION_CHANNEL_B;Blue
-!TP_COLORTONING_LABREGION_CHANNEL_G;Green
-!TP_COLORTONING_LABREGION_CHANNEL_R;Red
-!TP_COLORTONING_LABREGION_CHROMATICITYMASK;C
-!TP_COLORTONING_LABREGION_HUEMASK;H
-!TP_COLORTONING_LABREGION_LIGHTNESS;Lightness
-!TP_COLORTONING_LABREGION_LIGHTNESSMASK;L
-!TP_COLORTONING_LABREGION_LIST_TITLE;Correction
-!TP_COLORTONING_LABREGION_MASK;Mask
-!TP_COLORTONING_LABREGION_MASKBLUR;Mask Blur
-!TP_COLORTONING_LABREGION_OFFSET;Offset
-!TP_COLORTONING_LABREGION_POWER;Power
-!TP_COLORTONING_LABREGION_SATURATION;Saturation
-!TP_COLORTONING_LABREGION_SHOWMASK;Show mask
-!TP_COLORTONING_LABREGION_SLOPE;Slope
-!TP_COLORTONING_LUMA;Luminance
-!TP_COLORTONING_LUMAMODE;Preserve luminance
-!TP_COLORTONING_LUMAMODE_TOOLTIP;If enabled, when you change color (red, green, cyan, blue, etc.) the luminance of each pixel is preserved.
-!TP_COLORTONING_METHOD;Method
-!TP_COLORTONING_METHOD_TOOLTIP;"L*a*b* blending", "RGB sliders" and "RGB curves" use interpolated color blending.\n"Color balance (Shadows/Midtones/Highlights)" and "Saturation 2 colors" use direct colors.\n\nThe Black-and-White tool can be enabled when using any color toning method, which allows for color toning.
-!TP_COLORTONING_MIDTONES;Midtones
-!TP_COLORTONING_NEUTRAL;Reset sliders
-!TP_COLORTONING_NEUTRAL_TIP;Reset all values (Shadows, Midtones, Highlights) to default.
-!TP_COLORTONING_OPACITY;Opacity
-!TP_COLORTONING_RGBCURVES;RGB - Curves
-!TP_COLORTONING_RGBSLIDERS;RGB - Sliders
-!TP_COLORTONING_SA;Saturation Protection
-!TP_COLORTONING_SATURATEDOPACITY;Strength
-!TP_COLORTONING_SATURATIONTHRESHOLD;Threshold
-!TP_COLORTONING_SHADOWS;Shadows
-!TP_COLORTONING_SPLITCO;Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITCOCO;Color Balance Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITLR;Saturation 2 colors
-!TP_COLORTONING_STR;Strength
-!TP_COLORTONING_STRENGTH;Strength
-!TP_COLORTONING_TWO2;Special chroma '2 colors'
-!TP_COLORTONING_TWOALL;Special chroma
-!TP_COLORTONING_TWOBY;Special a* and b*
-!TP_COLORTONING_TWOCOLOR_TOOLTIP;Standard chroma:\nLinear response, a* = b*.\n\nSpecial chroma:\nLinear response, a* = b*, but unbound - try under the diagonal.\n\nSpecial a* and b*:\nLinear response unbound with separate curves for a* and b*. Intended for special effects.\n\nSpecial chroma 2 colors:\nMore predictable.
-!TP_COLORTONING_TWOSTD;Standard chroma
-!TP_CROP_GTEPASSPORT;Biometric Passport
-!TP_CROP_GTFRAME;Frame
-!TP_CROP_GTGRID;Grid
-!TP_CROP_GTHARMMEANS;Harmonic Means
-!TP_CROP_GTTRIANGLE1;Golden Triangles 1
-!TP_CROP_GTTRIANGLE2;Golden Triangles 2
-!TP_CROP_PPI;PPI
-!TP_CROP_RESETCROP;Reset
-!TP_CROP_SELECTCROP;Select
-!TP_DARKFRAME_AUTOSELECT;Auto-selection
-!TP_DARKFRAME_LABEL;Dark-Frame
-!TP_DEFRINGE_LABEL;Defringe
-!TP_DEFRINGE_RADIUS;Radius
-!TP_DEFRINGE_THRESHOLD;Threshold
-!TP_DEHAZE_DEPTH;Depth
-!TP_DEHAZE_LABEL;Haze Removal
-!TP_DEHAZE_SHOW_DEPTH_MAP;Show depth map
-!TP_DEHAZE_STRENGTH;Strength
-!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
-!TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
-!TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominance
-!TP_DIRPYRDENOISE_CHROMINANCE_MANUAL;Manual
-!TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Chrominance - Master
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD;Method
-!TP_DIRPYRDENOISE_CHROMINANCE_METHODADVANCED_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nAutomatic multi-zones\nNo preview - works only during saving, but using the "Preview" method by matching the tile size and center to the preview size and center you can get an idea of the expected results.\nThe image is divided into tiles (about 10 to 70 depending on image size) and each tile receives its own chrominance noise reduction settings.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_PMZ;Preview multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW;Preview
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEWRESIDUAL_INFO_TOOLTIP;Displays the remaining noise levels of the part of the image visible in the preview after wavelet.\n\n>300 Very noisy\n100-300 Noisy\n50-100 A little noisy\n<50 Very low noise\n\nBeware, the values will differ between RGB and L*a*b* mode. The RGB values are less accurate because the RGB mode does not completely separate luminance and chrominance.
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_INFO;Preview size=%1, Center: Px=%2 Py=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Preview noise: Mean=%1 High=%2
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= - High= -
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2 Ty=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
-!TP_DIRPYRDENOISE_LABEL;Noise Reduction
-!TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
-!TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
-!TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Detail recovery
-!TP_DIRPYRDENOISE_LUMINANCE_FRAME;Luminance
-!TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminance
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE;Color space
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;For raw images either RGB or L*a*b* methods can be used.\n\nFor non-raw images the L*a*b* method will be used, regardless of the selection.
-!TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
-!TP_DIRPYRDENOISE_MAIN_GAMMA_TOOLTIP;Gamma varies noise reduction strength across the range of tones. Smaller values will target shadows, while larger values will stretch the effect to the brighter tones.
-!TP_DIRPYRDENOISE_MAIN_MODE;Mode
-!TP_DIRPYRDENOISE_MAIN_MODE_AGGRESSIVE;Aggressive
-!TP_DIRPYRDENOISE_MAIN_MODE_CONSERVATIVE;Conservative
-!TP_DIRPYRDENOISE_MAIN_MODE_TOOLTIP;"Conservative" preserves low frequency chroma patterns, while "aggressive" obliterates them.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD;Median method
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_CHROMINANCE;Chroma only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LABEL;Median Filter
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LUMINANCE;Luminance only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_RGB;RGB
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_TOOLTIP;When using the "Luminance only" and "L*a*b*" methods, median filtering will be performed just after the wavelet step in the noise reduction pipeline.\nWhen using the "RGB" mode, it will be performed at the very end of the noise reduction pipeline.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_WEIGHTED;Weighted L* (little) + a*b* (normal)
-!TP_DIRPYRDENOISE_MEDIAN_PASSES;Median iterations
-!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
-!TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
-!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
-!TP_DIRPYRDENOISE_TYPE_3X3;3×3
-!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
-!TP_DIRPYRDENOISE_TYPE_5X5;5×5
-!TP_DIRPYRDENOISE_TYPE_5X5SOFT;5×5 soft
-!TP_DIRPYRDENOISE_TYPE_7X7;7×7
-!TP_DIRPYRDENOISE_TYPE_9X9;9×9
-!TP_DIRPYREQUALIZER_ALGO;Skin Color Range
-!TP_DIRPYREQUALIZER_ALGO_TOOLTIP;Fine: closer to the colors of the skin, minimizing the action on other colors\nLarge: avoid more artifacts.
-!TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts
-!TP_DIRPYREQUALIZER_HUESKIN;Skin hue
-!TP_DIRPYREQUALIZER_HUESKIN_TOOLTIP;This pyramid is for the upper part, so far as the algorithm at its maximum efficiency.\nTo the lower part, the transition zones.\nIf you need to move the area significantly to the left or right - or if there are artifacts: the white balance is incorrect\nYou can slightly reduce the zone to prevent the rest of the image is affected.
-!TP_DIRPYREQUALIZER_LABEL;Contrast by Detail Levels
-!TP_DIRPYREQUALIZER_LUMACOARSEST;Coarsest
-!TP_DIRPYREQUALIZER_LUMACONTRAST_MINUS;Contrast -
-!TP_DIRPYREQUALIZER_LUMACONTRAST_PLUS;Contrast +
-!TP_DIRPYREQUALIZER_LUMAFINEST;Finest
-!TP_DIRPYREQUALIZER_LUMANEUTRAL;Neutral
-!TP_DIRPYREQUALIZER_SKIN;Skin targetting/protection
-!TP_DIRPYREQUALIZER_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_DIRPYREQUALIZER_THRESHOLD;Threshold
-!TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image.
-!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
-!TP_EPD_EDGESTOPPING;Edge stopping
-!TP_EPD_GAMMA;Gamma
-!TP_EPD_LABEL;Tone Mapping
-!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
-!TP_EPD_SCALE;Scale
-!TP_EPD_STRENGTH;Strength
-!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
-!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
-!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
-!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
-!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
-!TP_EXPOSURE_CURVEEDITOR2;Tone curve 2
-!TP_EXPOSURE_CURVEEDITOR2_TOOLTIP;Please refer to the "Exposure > Tone Curves" RawPedia article to learn how to achieve the best results by using two tone curves.
-!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
-!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
-!TP_EXPOSURE_SATURATION;Saturation
-!TP_EXPOSURE_TCMODE_FILMLIKE;Film-like
-!TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1
-!TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2
-!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
-!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual
-!TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending
-!TP_EXPOSURE_TCMODE_STANDARD;Standard
-!TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard
-!TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points
-!TP_EXPOS_WHITEPOINT_LABEL;Raw White Points
-!TP_FILMSIMULATION_LABEL;Film Simulation
-!TP_FILMSIMULATION_SLOWPARSEDIR;RawTherapee is configured to look for Hald CLUT images, which are used for the Film Simulation tool, in a folder which is taking too long to load.\nGo to Preferences > Image Processing > Film Simulation\nto see which folder is being used. You should either point RawTherapee to a folder which contains only Hald CLUT images and nothing more, or to an empty folder if you don't want to use the Film Simulation tool.\n\nRead the Film Simulation article in RawPedia for more information.\n\nDo you want to cancel the scan now?
-!TP_FILMSIMULATION_STRENGTH;Strength
-!TP_FILMSIMULATION_ZEROCLUTSFOUND;Set HaldCLUT directory in Preferences
-!TP_FLATFIELD_AUTOSELECT;Auto-selection
-!TP_FLATFIELD_BLURRADIUS;Blur radius
-!TP_FLATFIELD_BLURTYPE;Blur type
-!TP_FLATFIELD_BT_AREA;Area
-!TP_FLATFIELD_BT_HORIZONTAL;Horizontal
-!TP_FLATFIELD_BT_VERTHORIZ;Vertical + Horizontal
-!TP_FLATFIELD_BT_VERTICAL;Vertical
-!TP_FLATFIELD_CLIPCONTROL;Clip control
-!TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Clip control avoids clipped highlights caused by applying the flat field. If there are already clipped highlights before applying the flat field, clip control can lead to color cast.
-!TP_FLATFIELD_LABEL;Flat-Field
-!TP_GENERAL_11SCALE_TOOLTIP;The effects of this tool are only visible or only accurate at a preview scale of 1:1.
-!TP_GRADIENT_CENTER;Center
-!TP_GRADIENT_CENTER_X;Center X
-!TP_GRADIENT_CENTER_X_TOOLTIP;Shift gradient to the left (negative values) or right (positive values).
-!TP_GRADIENT_CENTER_Y;Center Y
-!TP_GRADIENT_CENTER_Y_TOOLTIP;Shift gradient up (negative values) or down (positive values).
-!TP_GRADIENT_DEGREE;Angle
-!TP_GRADIENT_DEGREE_TOOLTIP;Rotation angle in degrees.
-!TP_GRADIENT_FEATHER;Feather
-!TP_GRADIENT_FEATHER_TOOLTIP;Gradient width in percent of the image diagonal.
-!TP_GRADIENT_LABEL;Graduated Filter
-!TP_GRADIENT_STRENGTH;Strength
-!TP_GRADIENT_STRENGTH_TOOLTIP;Filter strength in stops.
-!TP_HLREC_BLEND;Blend
-!TP_HLREC_ENA_TOOLTIP;Could be activated by Auto Levels.
-!TP_HSVEQUALIZER_CHANNEL;Channel
-!TP_HSVEQUALIZER_HUE;H
-!TP_HSVEQUALIZER_LABEL;HSV Equalizer
-!TP_HSVEQUALIZER_SAT;S
-!TP_HSVEQUALIZER_VAL;V
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Baseline exposure
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET_TOOLTIP;Employ the embedded DCP baseline exposure offset. The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYHUESATMAP;Base table
-!TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYLOOKTABLE;Look table
-!TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-!TP_ICM_BLENDCMSMATRIX;Blend ICC highlights with matrix
-!TP_ICM_BLENDCMSMATRIX_TOOLTIP;Enable to recover clipped highlights when using LUT-based ICC profiles.
-!TP_ICM_BPC;Black Point Compensation
-!TP_ICM_DCPILLUMINANT;Illuminant
-!TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
-!TP_ICM_DCPILLUMINANT_TOOLTIP;Select which embedded DCP illuminant to employ. Default is "interpolated" which is a mix between the two based on white balance. The setting is only available if a dual-illuminant DCP with interpolation support is selected.
-!TP_ICM_INPUTCAMERAICC;Auto-matched camera profile
-!TP_ICM_INPUTCAMERAICC_TOOLTIP;Use RawTherapee's camera-specific DCP or ICC input color profiles. These profiles are more precise than simpler matrix ones. They are not available for all cameras. These profiles are stored in the /iccprofiles/input and /dcpprofiles folders and are automatically retrieved based on a file name matching to the exact model name of the camera.
-!TP_ICM_INPUTCAMERA_TOOLTIP;Use a simple color matrix from dcraw, an enhanced RawTherapee version (whichever is available based on camera model) or one embedded in the DNG.
-!TP_ICM_INPUTCUSTOM_TOOLTIP;Select your own DCP/ICC color profile file for the camera.
-!TP_ICM_INPUTEMBEDDED_TOOLTIP;Use color profile embedded in non-raw files.
-!TP_ICM_INPUTNONE;No profile
-!TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases.
-!TP_ICM_PROFILEINTENT;Rendering Intent
-!TP_ICM_SAVEREFERENCE;Save Reference Image
-!TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance
-!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles.
-!TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile.
-!TP_ICM_TONECURVE;Tone curve
-!TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only available if the selected DCP has a tone curve.
-!TP_ICM_WORKING_TRC;Tone response curve:
-!TP_ICM_WORKING_TRC_CUSTOM;Custom
-!TP_ICM_WORKING_TRC_GAMMA;Gamma
-!TP_ICM_WORKING_TRC_NONE;None
-!TP_ICM_WORKING_TRC_SLOPE;Slope
-!TP_ICM_WORKING_TRC_TOOLTIP;Only for built-in profiles.
-!TP_IMPULSEDENOISE_LABEL;Impulse Noise Reduction
-!TP_IMPULSEDENOISE_THRESH;Threshold
-!TP_LABCURVE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_LABCURVE_AVOIDCOLORSHIFT_TOOLTIP;Fit colors into gamut of the working color space and apply Munsell correction.
-!TP_LABCURVE_BRIGHTNESS;Lightness
-!TP_LABCURVE_CHROMATICITY;Chromaticity
-!TP_LABCURVE_CHROMA_TOOLTIP;To apply B&W toning, set Chromaticity to -100.
-!TP_LABCURVE_CONTRAST;Contrast
-!TP_LABCURVE_CURVEEDITOR;Luminance Curve
-!TP_LABCURVE_CURVEEDITOR_A_RANGE1;Green Saturated
-!TP_LABCURVE_CURVEEDITOR_A_RANGE2;Green Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE3;Red Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE4;Red Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE1;Blue Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE2;Blue Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE3;Yellow Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE4;Yellow Saturated
-!TP_LABCURVE_CURVEEDITOR_CC;CC
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE1;Neutral
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE2;Dull
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE3;Pastel
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE4;Saturated
-!TP_LABCURVE_CURVEEDITOR_CC_TOOLTIP;Chromaticity according to chromaticity C=f(C)
-!TP_LABCURVE_CURVEEDITOR_CH;CH
-!TP_LABCURVE_CURVEEDITOR_CH_TOOLTIP;Chromaticity according to hue C=f(H)
-!TP_LABCURVE_CURVEEDITOR_CL;CL
-!TP_LABCURVE_CURVEEDITOR_CL_TOOLTIP;Chromaticity according to luminance C=f(L)
-!TP_LABCURVE_CURVEEDITOR_HH;HH
-!TP_LABCURVE_CURVEEDITOR_HH_TOOLTIP;Hue according to hue H=f(H)
-!TP_LABCURVE_CURVEEDITOR_LC;LC
-!TP_LABCURVE_CURVEEDITOR_LC_TOOLTIP;Luminance according to chromaticity L=f(C)
-!TP_LABCURVE_CURVEEDITOR_LH;LH
-!TP_LABCURVE_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H)
-!TP_LABCURVE_CURVEEDITOR_LL_TOOLTIP;Luminance according to luminance L=f(L)
-!TP_LABCURVE_LABEL;L*a*b* Adjustments
-!TP_LABCURVE_LCREDSK;Restrict LC to red and skin-tones
-!TP_LABCURVE_LCREDSK_TIP;If enabled, the LC Curve affects only red and skin-tones.\nIf disabled, it applies to all tones.
-!TP_LABCURVE_RSTPROTECTION;Red and skin-tones protection
-!TP_LABCURVE_RSTPRO_TOOLTIP;Works on the Chromaticity slider and the CC curve.
-!TP_LENSGEOM_AUTOCROP;Auto-Crop
-!TP_LENSGEOM_FILL;Auto-fill
-!TP_LENSGEOM_LABEL;Lens / Geometry
-!TP_LENSPROFILE_CORRECTION_AUTOMATCH;Automatically selected
-!TP_LENSPROFILE_CORRECTION_LCPFILE;LCP file
-!TP_LENSPROFILE_CORRECTION_MANUAL;Manually selected
-!TP_LENSPROFILE_LABEL;Profiled Lens Correction
-!TP_LENSPROFILE_LENS_WARNING;Warning: the crop factor used for lens profiling is larger than the crop factor of the camera, the results might be wrong.
-!TP_LENSPROFILE_MODE_HEADER;Lens Profile
-!TP_LENSPROFILE_USE_CA;Chromatic aberration
-!TP_LENSPROFILE_USE_GEOMETRIC;Geometric distortion
-!TP_LENSPROFILE_USE_HEADER;Correct
-!TP_LENSPROFILE_USE_VIGNETTING;Vignetting
-!TP_LOCALCONTRAST_AMOUNT;Amount
-!TP_LOCALCONTRAST_DARKNESS;Darkness level
-!TP_LOCALCONTRAST_LABEL;Local Contrast
-!TP_LOCALCONTRAST_LIGHTNESS;Lightness level
-!TP_LOCALCONTRAST_RADIUS;Radius
-!TP_METADATA_EDIT;Apply modifications
-!TP_METADATA_MODE;Metadata copy mode
-!TP_METADATA_STRIP;Strip all metadata
-!TP_METADATA_TUNNEL;Copy unchanged
-!TP_NEUTRAL;Reset
-!TP_NEUTRAL_TIP;Resets exposure sliders to neutral values.\nApplies to the same controls that Auto Levels applies to, regardless of whether you used Auto Levels or not.
-!TP_PCVIGNETTE_FEATHER;Feather
-!TP_PCVIGNETTE_FEATHER_TOOLTIP;Feathering:\n0 = corners only,\n50 = halfway to center,\n100 = to center.
-!TP_PCVIGNETTE_LABEL;Vignette Filter
-!TP_PCVIGNETTE_ROUNDNESS;Roundness
-!TP_PCVIGNETTE_ROUNDNESS_TOOLTIP;Roundness:\n0 = rectangle,\n50 = fitted ellipse,\n100 = circle.
-!TP_PCVIGNETTE_STRENGTH;Strength
-!TP_PCVIGNETTE_STRENGTH_TOOLTIP;Filter strength in stops (reached in corners).
-!TP_PERSPECTIVE_HORIZONTAL;Horizontal
-!TP_PERSPECTIVE_LABEL;Perspective
-!TP_PERSPECTIVE_VERTICAL;Vertical
-!TP_PFCURVE_CURVEEDITOR_CH;Hue
-!TP_PFCURVE_CURVEEDITOR_CH_TOOLTIP;Controls defringe strength by color.\nHigher = more,\nLower = less.
-!TP_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!TP_PREPROCESS_DEADPIXFILT_TOOLTIP;Tries to suppress dead pixels.
-!TP_PREPROCESS_GREENEQUIL;Green equilibration
-!TP_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!TP_PREPROCESS_HOTPIXFILT_TOOLTIP;Tries to suppress hot pixels.
-!TP_PREPROCESS_LABEL;Preprocessing
-!TP_PREPROCESS_LINEDENOISE;Line noise filter
-!TP_PREPROCESS_LINEDENOISE_DIRECTION;Direction
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_BOTH;Both
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_HORIZONTAL;Horizontal
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_PDAF_LINES;Horizontal only on PDAF rows
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_VERTICAL;Vertical
-!TP_PREPROCESS_NO_FOUND;None found
-!TP_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!TP_PRSHARPENING_LABEL;Post-Resize Sharpening
-!TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions.
-!TP_RAWCACORR_AUTO;Auto-correction
-!TP_RAWCACORR_AUTOIT;Iterations
-!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
-!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CABLUE;Blue
-!TP_RAWCACORR_CARED;Red
-!TP_RAWCACORR_CASTR;Strength
-!TP_RAWEXPOS_BLACKS;Black Levels
-!TP_RAWEXPOS_BLACK_0;Green 1 (lead)
-!TP_RAWEXPOS_BLACK_1;Red
-!TP_RAWEXPOS_BLACK_2;Blue
-!TP_RAWEXPOS_BLACK_3;Green 2
-!TP_RAWEXPOS_BLACK_BLUE;Blue
-!TP_RAWEXPOS_BLACK_GREEN;Green
-!TP_RAWEXPOS_BLACK_RED;Red
-!TP_RAWEXPOS_LINEAR;White-point correction
-!TP_RAWEXPOS_RGB;Red, Green, Blue
-!TP_RAWEXPOS_TWOGREEN;Link greens
-!TP_RAW_1PASSMEDIUM;1-pass (Markesteijn)
-!TP_RAW_2PASS;1-pass+fast
-!TP_RAW_3PASSBEST;3-pass (Markesteijn)
-!TP_RAW_4PASS;3-pass+fast
-!TP_RAW_AHD;AHD
-!TP_RAW_AMAZE;AMaZE
-!TP_RAW_AMAZEVNG4;AMaZE+VNG4
-!TP_RAW_BORDER;Border
-!TP_RAW_DCB;DCB
-!TP_RAW_DCBENHANCE;DCB enhancement
-!TP_RAW_DCBITERATIONS;Number of DCB iterations
-!TP_RAW_DCBVNG4;DCB+VNG4
-!TP_RAW_DMETHOD_PROGRESSBAR;%1 demosaicing...
-!TP_RAW_DMETHOD_PROGRESSBAR_REFINE;Demosaicing refinement...
-!TP_RAW_DMETHOD_TOOLTIP;Note: IGV and LMMSE are dedicated to high ISO images to aid in noise reduction without leading to maze patterns, posterization or a washed-out look.\nPixel Shift is for Pentax/Sony Pixel Shift files. It falls back to AMaZE for non-Pixel Shift files.
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST;Auto threshold
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST_TOOLTIP;If the checkbox is checked (recommended), RawTherapee calculates an optimum value based on flat regions in the image.\nIf there is no flat region in the image or the image is too noisy, the value will be set to 0.\nTo set the value manually, uncheck the checkbox first (reasonable values depend on the image).
-!TP_RAW_DUALDEMOSAICCONTRAST;Contrast threshold
-!TP_RAW_EAHD;EAHD
-!TP_RAW_FAST;Fast
-!TP_RAW_HD;Threshold
-!TP_RAW_HD_TOOLTIP;Lower values make hot/dead pixel detection more aggressive, but false positives may lead to artifacts. If you notice any artifacts appearing when enabling the Hot/Dead Pixel Filters, gradually increase the threshold value until they disappear.
-!TP_RAW_HPHD;HPHD
-!TP_RAW_IGV;IGV
-!TP_RAW_IMAGENUM;Sub-image
-!TP_RAW_IMAGENUM_SN;SN mode
-!TP_RAW_IMAGENUM_TOOLTIP;Some raw files consist of several sub-images (Pentax/Sony Pixel Shift, Pentax 3-in-1 HDR, Canon Dual Pixel, Fuji EXR).\n\nWhen using any demosaicing method other than Pixel Shift, this selects which sub-image is used.\n\nWhen using the Pixel Shift demosaicing method on a Pixel Shift raw, all sub-images are used, and this selects which sub-image should be used for moving parts.
-!TP_RAW_LABEL;Demosaicing
-!TP_RAW_LMMSE;LMMSE
-!TP_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!TP_RAW_LMMSE_TOOLTIP;Adds gamma (step 1), median (steps 2-4) and refinement (steps 5-6) to reduce artifacts and improve the signal-to-noise ratio.
-!TP_RAW_MONO;Mono
-!TP_RAW_NONE;None (Shows sensor pattern)
-!TP_RAW_PIXELSHIFT;Pixel Shift
-!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
-!TP_RAW_PIXELSHIFTDMETHOD;Demosaic method for motion
-!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
-!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
-!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
-!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
-!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
-!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
-!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
-!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
-!TP_RAW_PIXELSHIFTMM_OFF;Off
-!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
-!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
-!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
-!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
-!TP_RAW_PIXELSHIFTSIGMA;Blur radius
-!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
-!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
-!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
-!TP_RAW_RCD;RCD
-!TP_RAW_RCDVNG4;RCD+VNG4
-!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
-!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.\n+fast gives less artifacts in flat areas
-!TP_RAW_SENSOR_XTRANS_LABEL;Sensor with X-Trans Matrix
-!TP_RAW_VNG4;VNG4
-!TP_RAW_XTRANS;X-Trans
-!TP_RAW_XTRANSFAST;Fast X-Trans
-!TP_RESIZE_ALLOW_UPSCALING;Allow Upscaling
-!TP_RESIZE_APPLIESTO;Applies to:
-!TP_RESIZE_CROPPEDAREA;Cropped Area
-!TP_RESIZE_FITBOX;Bounding Box
-!TP_RESIZE_FULLIMAGE;Full Image
-!TP_RESIZE_HEIGHT;Height
-!TP_RESIZE_LANCZOS;Lanczos
-!TP_RESIZE_SPECIFY;Specify:
-!TP_RESIZE_WIDTH;Width
-!TP_RETINEX_CONTEDIT_HSL;HSL histogram
-!TP_RETINEX_CONTEDIT_LAB;L*a*b* histogram
-!TP_RETINEX_CONTEDIT_LH;Hue
-!TP_RETINEX_CONTEDIT_MAP;Equalizer
-!TP_RETINEX_CURVEEDITOR_CD;L=f(L)
-!TP_RETINEX_CURVEEDITOR_CD_TOOLTIP;Luminance according to luminance L=f(L)\nCorrect raw data to reduce halos and artifacts.
-!TP_RETINEX_CURVEEDITOR_LH;Strength=f(H)
-!TP_RETINEX_CURVEEDITOR_LH_TOOLTIP;Strength according to hue Strength=f(H)\nThis curve also acts on chroma when using the "Highlight" retinex method.
-!TP_RETINEX_CURVEEDITOR_MAP;L=f(L)
-!TP_RETINEX_CURVEEDITOR_MAP_TOOLTIP;This curve can be applied alone or with a Gaussian mask or wavelet mask.\nBeware of artifacts!
-!TP_RETINEX_EQUAL;Equalizer
-!TP_RETINEX_FREEGAMMA;Free gamma
-!TP_RETINEX_GAIN;Gain
-!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
-!TP_RETINEX_GAINTRANSMISSION;Gain transmission
-!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
-!TP_RETINEX_GAMMA;Gamma
-!TP_RETINEX_GAMMA_FREE;Free
-!TP_RETINEX_GAMMA_HIGH;High
-!TP_RETINEX_GAMMA_LOW;Low
-!TP_RETINEX_GAMMA_MID;Middle
-!TP_RETINEX_GAMMA_NONE;None
-!TP_RETINEX_GAMMA_TOOLTIP;Restore tones by applying gamma before and after Retinex. Different from Retinex curves or others curves (Lab, Exposure, etc.).
-!TP_RETINEX_GRAD;Transmission gradient
-!TP_RETINEX_GRADS;Strength gradient
-!TP_RETINEX_GRADS_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Strength is reduced when iterations increase, and conversely.
-!TP_RETINEX_GRAD_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Variance and Threshold are reduced when iterations increase, and conversely.
-!TP_RETINEX_HIGH;High
-!TP_RETINEX_HIGHLIG;Highlight
-!TP_RETINEX_HIGHLIGHT;Highlight threshold
-!TP_RETINEX_HIGHLIGHT_TOOLTIP;Increase action of High algorithm.\nMay require you to re-adjust "Neighboring pixels" and to increase the "White-point correction" in the Raw tab -> Raw White Points tool.
-!TP_RETINEX_HSLSPACE_LIN;HSL-Linear
-!TP_RETINEX_HSLSPACE_LOG;HSL-Logarithmic
-!TP_RETINEX_ITER;Iterations (Tone-mapping)
-!TP_RETINEX_ITERF;Tone mapping
-!TP_RETINEX_ITER_TOOLTIP;Simulate a tone-mapping operator.\nHigh values increase the processing time.
-!TP_RETINEX_LABEL;Retinex
-!TP_RETINEX_LABEL_MASK;Mask
-!TP_RETINEX_LABSPACE;L*a*b*
-!TP_RETINEX_LOW;Low
-!TP_RETINEX_MAP;Method
-!TP_RETINEX_MAP_GAUS;Gaussian mask
-!TP_RETINEX_MAP_MAPP;Sharp mask (wavelet partial)
-!TP_RETINEX_MAP_MAPT;Sharp mask (wavelet total)
-!TP_RETINEX_MAP_METHOD_TOOLTIP;Use the mask generated by the Gaussian function above (Radius, Method) to reduce halos and artifacts.\n\nCurve only: apply a diagonal contrast curve on the mask.\nBeware of artifacts!\n\nGaussian mask: generate and use a Gaussian blur of the original mask.\nQuick.\n\nSharp mask: generate and use a wavelet on the original mask.\nSlow.
-!TP_RETINEX_MAP_NONE;None
-!TP_RETINEX_MEDIAN;Transmission median filter
-!TP_RETINEX_METHOD;Method
-!TP_RETINEX_METHOD_TOOLTIP;Low = Reinforce low light.\nUniform = Equalize action.\nHigh = Reinforce high light.\nHighlights = Remove magenta in highlights.
-!TP_RETINEX_MLABEL;Restored haze-free Min=%1 Max=%2
-!TP_RETINEX_MLABEL_TOOLTIP;Should be near min=0 max=32768\nRestored image with no mixture.
-!TP_RETINEX_NEIGHBOR;Radius
-!TP_RETINEX_NEUTRAL;Reset
-!TP_RETINEX_NEUTRAL_TIP;Reset all sliders and curves to their default values.
-!TP_RETINEX_OFFSET;Offset (brightness)
-!TP_RETINEX_SCALES;Gaussian gradient
-!TP_RETINEX_SCALES_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Scale and radius are reduced when iterations increase, and conversely.
-!TP_RETINEX_SETTINGS;Settings
-!TP_RETINEX_SKAL;Scale
-!TP_RETINEX_SLOPE;Free gamma slope
-!TP_RETINEX_STRENGTH;Strength
-!TP_RETINEX_THRESHOLD;Threshold
-!TP_RETINEX_THRESHOLD_TOOLTIP;Limits in/out.\nIn = image source,\nOut = image gauss.
-!TP_RETINEX_TLABEL;TM Min=%1 Max=%2 Mean=%3 Sigma=%4
-!TP_RETINEX_TLABEL2;TM Tm=%1 TM=%2
-!TP_RETINEX_TLABEL_TOOLTIP;Transmission map result.\nMin and Max are used by Variance.\nMean and Sigma.\nTm=Min TM=Max of transmission map.
-!TP_RETINEX_TRANF;Transmission
-!TP_RETINEX_TRANSMISSION;Transmission map
-!TP_RETINEX_TRANSMISSION_TOOLTIP;Transmission according to transmission.\nAbscissa: transmission from negative values (min), mean, and positives values (max).\nOrdinate: amplification or reduction.
-!TP_RETINEX_UNIFORM;Uniform
-!TP_RETINEX_VARIANCE;Contrast
-!TP_RETINEX_VARIANCE_TOOLTIP;Low variance increase local contrast and saturation, but can lead to artifacts.
-!TP_RETINEX_VIEW;Process
-!TP_RETINEX_VIEW_MASK;Mask
-!TP_RETINEX_VIEW_METHOD_TOOLTIP;Standard - Normal display.\nMask - Displays the mask.\nUnsharp mask - Displays the image with a high radius unsharp mask.\nTransmission - Auto/Fixed - Displays the file transmission-map, before any action on contrast and brightness.\n\nAttention: the mask does not correspond to reality, but is amplified to make it more visible.
-!TP_RETINEX_VIEW_NONE;Standard
-!TP_RETINEX_VIEW_TRAN;Transmission - Auto
-!TP_RETINEX_VIEW_TRAN2;Transmission - Fixed
-!TP_RETINEX_VIEW_UNSHARP;Unsharp mask
-!TP_RGBCURVES_BLUE;B
-!TP_RGBCURVES_CHANNEL;Channel
-!TP_RGBCURVES_GREEN;G
-!TP_RGBCURVES_LABEL;RGB Curves
-!TP_RGBCURVES_LUMAMODE;Luminosity mode
-!TP_RGBCURVES_LUMAMODE_TOOLTIP;Luminosity mode allows to vary the contribution of R, G and B channels to the luminosity of the image, without altering image color.
-!TP_RGBCURVES_RED;R
-!TP_SAVEDIALOG_OK_TIP;Shortcut: Ctrl-Enter
-!TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
-!TP_SHARPENEDGE_AMOUNT;Quantity
-!TP_SHARPENEDGE_LABEL;Edges
-!TP_SHARPENEDGE_PASSES;Iterations
-!TP_SHARPENEDGE_THREE;Luminance only
-!TP_SHARPENING_BLUR;Blur radius
-!TP_SHARPENING_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_AMOUNT;Quantity
-!TP_SHARPENMICRO_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_LABEL;Microcontrast
-!TP_SHARPENMICRO_MATRIX;3×3 matrix instead of 5×5
-!TP_SHARPENMICRO_UNIFORMITY;Uniformity
-!TP_SOFTLIGHT_LABEL;Soft Light
-!TP_SOFTLIGHT_STRENGTH;Strength
-!TP_TM_FATTAL_AMOUNT;Amount
-!TP_TM_FATTAL_ANCHOR;Anchor
-!TP_TM_FATTAL_LABEL;Dynamic Range Compression
-!TP_TM_FATTAL_THRESHOLD;Detail
-!TP_VIBRANCE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES;HH
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_LABEL;Skin-tones
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE1;Red/Purple
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE2;Red
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE3;Red/Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE4;Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_TOOLTIP;Hue according to hue H=f(H)
-!TP_VIBRANCE_LABEL;Vibrance
-!TP_VIBRANCE_PASTELS;Pastel Tones
-!TP_VIBRANCE_PASTSATTOG;Link pastel and saturated tones
-!TP_VIBRANCE_PROTECTSKINS;Protect skin-tones
-!TP_VIBRANCE_PSTHRESHOLD;Pastel/saturated tones threshold
-!TP_VIBRANCE_PSTHRESHOLD_SATTHRESH;Saturation threshold
-!TP_VIBRANCE_PSTHRESHOLD_TOOLTIP;The vertical axis represents pastel tones at the bottom and saturated tones at the top.\nThe horizontal axis represents the saturation range.
-!TP_VIBRANCE_PSTHRESHOLD_WEIGTHING;Pastel/saturated transition's weighting
-!TP_VIBRANCE_SATURATED;Saturated Tones
-!TP_VIGNETTING_CENTER;Center
-!TP_VIGNETTING_CENTER_X;Center X
-!TP_VIGNETTING_CENTER_Y;Center Y
-!TP_VIGNETTING_STRENGTH;Strength
-!TP_WAVELET_1;Level 1
-!TP_WAVELET_2;Level 2
-!TP_WAVELET_3;Level 3
-!TP_WAVELET_4;Level 4
-!TP_WAVELET_5;Level 5
-!TP_WAVELET_6;Level 6
-!TP_WAVELET_7;Level 7
-!TP_WAVELET_8;Level 8
-!TP_WAVELET_9;Level 9
-!TP_WAVELET_APPLYTO;Apply To
-!TP_WAVELET_AVOID;Avoid color shift
-!TP_WAVELET_B0;Black
-!TP_WAVELET_B1;Grey
-!TP_WAVELET_B2;Residual
-!TP_WAVELET_BACKGROUND;Background
-!TP_WAVELET_BACUR;Curve
-!TP_WAVELET_BALANCE;Contrast balance d/v-h
-!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified.
-!TP_WAVELET_BALCHRO;Chroma balance
-!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance.
-!TP_WAVELET_BANONE;None
-!TP_WAVELET_BASLI;Slider
-!TP_WAVELET_BATYPE;Contrast balance method
-!TP_WAVELET_CBENAB;Toning and Color Balance
-!TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted
-!TP_WAVELET_CCURVE;Local contrast
-!TP_WAVELET_CH1;Whole chroma range
-!TP_WAVELET_CH2;Saturated/pastel
-!TP_WAVELET_CH3;Link contrast levels
-!TP_WAVELET_CHCU;Curve
-!TP_WAVELET_CHR;Chroma-contrast link strength
-!TP_WAVELET_CHRO;Saturated/pastel threshold
-!TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored.
-!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength"
-!TP_WAVELET_CHSL;Sliders
-!TP_WAVELET_CHTYPE;Chrominance method
-!TP_WAVELET_COLORT;Opacity Red-Green
-!TP_WAVELET_COMPCONT;Contrast
-!TP_WAVELET_COMPGAMMA;Compression gamma
-!TP_WAVELET_COMPGAMMA_TOOLTIP;Adjusting the gamma of the residual image allows you to equilibrate the data and histogram.
-!TP_WAVELET_COMPTM;Tone mapping
-!TP_WAVELET_CONTEDIT;'After' contrast curve
-!TP_WAVELET_CONTR;Gamut
-!TP_WAVELET_CONTRA;Contrast
-!TP_WAVELET_CONTRAST_MINUS;Contrast -
-!TP_WAVELET_CONTRAST_PLUS;Contrast +
-!TP_WAVELET_CONTRA_TOOLTIP;Changes contrast of the residual image.
-!TP_WAVELET_CTYPE;Chrominance control
-!TP_WAVELET_CURVEEDITOR_CC_TOOLTIP;Modifies local contrast as a function of the original local contrast (abscissa).\nLow abscissa values represent small local contrast (real values about 10..20).\n50% abscissa represents average local contrast (real value about 100..300).\n66% abscissa represents standard deviation of local contrast (real value about 300..800).\n100% abscissa represents maximum local contrast (real value about 3000..8000).
-!TP_WAVELET_CURVEEDITOR_CH;Contrast levels=f(Hue)
-!TP_WAVELET_CURVEEDITOR_CH_TOOLTIP;Modifies each level's contrast as a function of hue.\nTake care not to overwrite changes made with the Gamut sub-tool's hue controls.\nThe curve will only have an effect when wavelet contrast level sliders are non-zero.
-!TP_WAVELET_CURVEEDITOR_CL;L
-!TP_WAVELET_CURVEEDITOR_CL_TOOLTIP;Applies a final contrast luminance curve at the end of the wavelet treatment.
-!TP_WAVELET_CURVEEDITOR_HH;HH
-!TP_WAVELET_CURVEEDITOR_HH_TOOLTIP;Modifies the residual image's hue as a function of hue.
-!TP_WAVELET_DALL;All directions
-!TP_WAVELET_DAUB;Edge performance
-!TP_WAVELET_DAUB2;D2 - low
-!TP_WAVELET_DAUB4;D4 - standard
-!TP_WAVELET_DAUB6;D6 - standard plus
-!TP_WAVELET_DAUB10;D10 - medium
-!TP_WAVELET_DAUB14;D14 - high
-!TP_WAVELET_DAUB_TOOLTIP;Changes Daubechies coefficients:\nD4 = Standard,\nD14 = Often best performance, 10% more time-intensive.\n\nAffects edge detection as well as the general quality of the firsts levels. However the quality is not strictly related to this coefficient and can vary with images and uses.
-!TP_WAVELET_DONE;Vertical
-!TP_WAVELET_DTHR;Diagonal
-!TP_WAVELET_DTWO;Horizontal
-!TP_WAVELET_EDCU;Curve
-!TP_WAVELET_EDGCONT;Local contrast
-!TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, top-left, top-right and bottom-right represent respectively local contrast for low values, mean, mean+stdev and maxima.
-!TP_WAVELET_EDGE;Edge Sharpness
-!TP_WAVELET_EDGEAMPLI;Base amplification
-!TP_WAVELET_EDGEDETECT;Gradient sensitivity
-!TP_WAVELET_EDGEDETECTTHR;Threshold low (noise)
-!TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection)
-!TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky.
-!TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise.
-!TP_WAVELET_EDGESENSI;Edge sensitivity
-!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
-!TP_WAVELET_EDGTHRESH;Detail
-!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
-!TP_WAVELET_EDRAD;Radius
-!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
-!TP_WAVELET_EDSL;Threshold Sliders
-!TP_WAVELET_EDTYPE;Local contrast method
-!TP_WAVELET_EDVAL;Strength
-!TP_WAVELET_FINAL;Final Touchup
-!TP_WAVELET_FINEST;Finest
-!TP_WAVELET_HIGHLIGHT;Highlight luminance range
-!TP_WAVELET_HS1;Whole luminance range
-!TP_WAVELET_HS2;Shadows/Highlights
-!TP_WAVELET_HUESKIN;Skin hue
-!TP_WAVELET_HUESKIN_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_HUESKY;Sky hue
-!TP_WAVELET_HUESKY_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_ITER;Delta balance levels
-!TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels.
-!TP_WAVELET_LABEL;Wavelet Levels
-!TP_WAVELET_LARGEST;Coarsest
-!TP_WAVELET_LEVCH;Chroma
-!TP_WAVELET_LEVDIR_ALL;All levels in all directions
-!TP_WAVELET_LEVDIR_INF;Below or equal the level
-!TP_WAVELET_LEVDIR_ONE;One level
-!TP_WAVELET_LEVDIR_SUP;Above the level
-!TP_WAVELET_LEVELS;Wavelet levels
-!TP_WAVELET_LEVELS_TOOLTIP;Choose the number of detail levels the image is to be decomposed into. More levels require more RAM and require a longer processing time.
-!TP_WAVELET_LEVF;Contrast
-!TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1
-!TP_WAVELET_LEVONE;Level 2
-!TP_WAVELET_LEVTHRE;Level 4
-!TP_WAVELET_LEVTWO;Level 3
-!TP_WAVELET_LEVZERO;Level 1
-!TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength
-!TP_WAVELET_LIPST;Enhanced algoritm
-!TP_WAVELET_LOWLIGHT;Shadow luminance range
-!TP_WAVELET_MEDGREINF;First level
-!TP_WAVELET_MEDI;Reduce artifacts in blue sky
-!TP_WAVELET_MEDILEV;Edge detection
-!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine.
-!TP_WAVELET_NEUTRAL;Neutral
-!TP_WAVELET_NOIS;Denoise
-!TP_WAVELET_NOISE;Denoise and Refine
-!TP_WAVELET_NPHIGH;High
-!TP_WAVELET_NPLOW;Low
-!TP_WAVELET_NPNONE;None
-!TP_WAVELET_NPTYPE;Neighboring pixels
-!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced.
-!TP_WAVELET_OPACITY;Opacity Blue-Yellow
-!TP_WAVELET_OPACITYW;Contrast balance d/v-h curve
-!TP_WAVELET_OPACITYWL;Final local contrast
-!TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right.
-!TP_WAVELET_PASTEL;Pastel chroma
-!TP_WAVELET_PROC;Process
-!TP_WAVELET_RE1;Reinforced
-!TP_WAVELET_RE2;Unchanged
-!TP_WAVELET_RE3;Reduced
-!TP_WAVELET_RESCHRO;Chroma
-!TP_WAVELET_RESCON;Shadows
-!TP_WAVELET_RESCONH;Highlights
-!TP_WAVELET_RESID;Residual Image
-!TP_WAVELET_SAT;Saturated chroma
-!TP_WAVELET_SETTINGS;Wavelet Settings
-!TP_WAVELET_SKIN;Skin targetting/protection
-!TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_WAVELET_SKY;Sky targetting/protection
-!TP_WAVELET_SKY_TOOLTIP;At -100 sky-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 sky-tones are protected while all other tones are affected.
-!TP_WAVELET_STREN;Strength
-!TP_WAVELET_STRENGTH;Strength
-!TP_WAVELET_SUPE;Extra
-!TP_WAVELET_THR;Shadows threshold
-!TP_WAVELET_THRESHOLD;Highlight levels
-!TP_WAVELET_THRESHOLD2;Shadow levels
-!TP_WAVELET_THRESHOLD2_TOOLTIP;Only levels between 9 and 9 minus the value will be affected by the shadow luminance range. Other levels will be fully treated. The highest level possible is limited by the highlight level value (9 minus highlight level value).
-!TP_WAVELET_THRESHOLD_TOOLTIP;Only levels beyond the chosen value will be affected by the highlight luminance range. Other levels will be fully treated. The chosen value here limits the highest possible value of the shadow levels.
-!TP_WAVELET_THRH;Highlights threshold
-!TP_WAVELET_TILESBIG;Big tiles
-!TP_WAVELET_TILESFULL;Full image
-!TP_WAVELET_TILESIZE;Tiling method
-!TP_WAVELET_TILESLIT;Little tiles
-!TP_WAVELET_TILES_TOOLTIP;Processing the full image leads to better quality and is the recommended option, while using tiles is a fall-back solution for users with little RAM. Refer to RawPedia for memory requirements.
-!TP_WAVELET_TMSTRENGTH;Compression strength
-!TP_WAVELET_TMSTRENGTH_TOOLTIP;Control the strength of tone mapping or contrast compression of the residual image. When the value is different from 0, the Strength and Gamma sliders of the Tone Mapping tool in the Exposure tab will become grayed out.
-!TP_WAVELET_TMTYPE;Compression method
-!TP_WAVELET_TON;Toning
-!TP_WBALANCE_CLOUDY;Cloudy
-!TP_WBALANCE_DAYLIGHT;Daylight (sunny)
-!TP_WBALANCE_EQBLUERED;Blue/Red equalizer
-!TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behavior of "white balance" by modulating the blue/red balance.\nThis can be useful when shooting conditions:\na) are far from the standard illuminant (e.g. underwater),\nb) are far from conditions where calibrations were performed,\nc) where the matrices or ICC profiles are unsuitable.
-!TP_WBALANCE_FLASH55;Leica
-!TP_WBALANCE_FLASH60;Standard, Canon, Pentax, Olympus
-!TP_WBALANCE_FLASH65;Nikon, Panasonic, Sony, Minolta
-!TP_WBALANCE_FLASH_HEADER;Flash
-!TP_WBALANCE_FLUO1;F1 - Daylight
-!TP_WBALANCE_FLUO2;F2 - Cool White
-!TP_WBALANCE_FLUO3;F3 - White
-!TP_WBALANCE_FLUO4;F4 - Warm White
-!TP_WBALANCE_FLUO5;F5 - Daylight
-!TP_WBALANCE_FLUO6;F6 - Lite White
-!TP_WBALANCE_FLUO7;F7 - D65 Daylight Simulator
-!TP_WBALANCE_FLUO8;F8 - D50 / Sylvania F40 Design
-!TP_WBALANCE_FLUO9;F9 - Cool White Deluxe
-!TP_WBALANCE_FLUO10;F10 - Philips TL85
-!TP_WBALANCE_FLUO11;F11 - Philips TL84
-!TP_WBALANCE_FLUO12;F12 - Philips TL83
-!TP_WBALANCE_FLUO_HEADER;Fluorescent
-!TP_WBALANCE_GTI;GTI
-!TP_WBALANCE_HMI;HMI
-!TP_WBALANCE_JUDGEIII;JudgeIII
-!TP_WBALANCE_LAMP_HEADER;Lamp
-!TP_WBALANCE_LED_CRS;CRS SP12 WWMR16
-!TP_WBALANCE_LED_HEADER;LED
-!TP_WBALANCE_LED_LSI;LSI Lumelex 2040
-!TP_WBALANCE_PICKER;Pick
-!TP_WBALANCE_SHADE;Shade
-!TP_WBALANCE_SOLUX35;Solux 3500K
-!TP_WBALANCE_SOLUX41;Solux 4100K
-!TP_WBALANCE_SOLUX47;Solux 4700K (vendor)
-!TP_WBALANCE_SOLUX47_NG;Solux 4700K (Nat. Gallery)
-!TP_WBALANCE_TEMPBIAS;AWB temperature bias
-!TP_WBALANCE_TEMPBIAS_TOOLTIP;Allows to alter the computation of the "auto white balance"\nby biasing it towards warmer or cooler temperatures. The bias\nis expressed as a percentage of the computed temperature,\nso that the result is given by "computedTemp + computedTemp * bias".
-!TP_WBALANCE_TUNGSTEN;Tungsten
-!TP_WBALANCE_WATER1;UnderWater 1
-!TP_WBALANCE_WATER2;UnderWater 2
-!TP_WBALANCE_WATER_HEADER;UnderWater
-!ZOOMPANEL_100;(100%)
-!ZOOMPANEL_NEWCROPWINDOW;Open (new) detail window
-!ZOOMPANEL_ZOOM100;Zoom to 100%\nShortcut: z
-!ZOOMPANEL_ZOOMFITCROPSCREEN;Fit crop to screen\nShortcut: f
-!ZOOMPANEL_ZOOMFITSCREEN;Fit whole image to screen\nShortcut: Alt-f
-!ZOOMPANEL_ZOOMIN;Zoom In\nShortcut: +
-!ZOOMPANEL_ZOOMOUT;Zoom Out\nShortcut: -
diff --git a/rtdata/languages/Francais b/rtdata/languages/Francais
index 5128fe638..79a4ae1e8 100644
--- a/rtdata/languages/Francais
+++ b/rtdata/languages/Francais
@@ -97,7 +97,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Ignorer le niveau d'amélioration LMMSE [raw]
EXPORT_BYPASS_SHARPENEDGE;Ignorer netteté des bords
EXPORT_BYPASS_SHARPENING;Ignorer la netteté
EXPORT_BYPASS_SHARPENMICRO;Ignorer netteté des microcontrastes
-EXPORT_BYPASS_SH_HQ;Ignorer Ombres/Hautes lumières (HQ)
EXPORT_FASTEXPORTOPTIONS;Options d'Export Rapide
EXPORT_INSTRUCTIONS;Les options d'Export Rapide permettent de forcer des paramètres afin d'éviter d'utiliser des outils très consommateurs de temps et de ressources, et d'utiliser ces options dans la file de traitement. Cette méthode est recommandée pour la génération rapide d'images de basse résolution quand la vitesse est une priorité ou lorsqu'on désire une version redimensionnée d'une ou plusieurs images de sortie sans avoir à modifier leurs paramètres de développement.
EXPORT_MAXHEIGHT;Hauteur maximum:
@@ -110,7 +109,6 @@ EXPORT_USE_FAST_PIPELINE_TIP;Utilise un pipeline de traitement dédié pour les
EXPORT_USE_NORMAL_PIPELINE;Standard\n(ignore des étapes, redimentionne à la fin)
EXTPROGTARGET_1;raw
EXTPROGTARGET_2;file de traitement
-FILEBROWSER_ADDDELTEMPLATE;Ajouter/Supprimer le modèle...
FILEBROWSER_APPLYPROFILE;Appliquer le profil
FILEBROWSER_APPLYPROFILE_PARTIAL;Appliquer le profil (partiel)
FILEBROWSER_AUTODARKFRAME;Soustraction automatique de Trame Noire
@@ -244,7 +242,6 @@ GIMP_PLUGIN_INFO;Bienvenue dans le plugin RawTherapee de GIMP!\nUne fois l'édit
HISTOGRAM_TOOLTIP_B;Montrer/cacher l'histogramme BLEU
HISTOGRAM_TOOLTIP_BAR;Montrer/Cacher l'indicateur RVB du pixel pointé\nCliquer le bouton droit de la souris sur l'image de prévisualisation pour geler/dégeler
HISTOGRAM_TOOLTIP_CHRO;Montrer/Cacher l'histogramme de Chromaticité
-HISTOGRAM_TOOLTIP_FULL;Basculer la vue de l'histogramme : complet (activé) / zoomé (désactivé)
HISTOGRAM_TOOLTIP_G;Montrer/cacher l'histogramme VERT
HISTOGRAM_TOOLTIP_L;Montrer/cacher l'histogramme Luminance CIELAB
HISTOGRAM_TOOLTIP_MODE;Bascule entre une échelle linéaire, linéaire-log et log-log de l'histogramme.
@@ -782,7 +779,6 @@ HISTORY_NEWSNAPSHOT;Ajouter
HISTORY_NEWSNAPSHOT_TOOLTIP;Raccourci: Alt-s
HISTORY_SNAPSHOT;Capture
HISTORY_SNAPSHOTS;Captures
-ICCPROFCREATOR_ADD_PARAM_IN_DESC;Ajoute le paramètre Gamma et Pente (Slope) à la fin de la description
ICCPROFCREATOR_COPYRIGHT;Copyright:
ICCPROFCREATOR_COPYRIGHT_RESET_TOOLTIP;Réinitialise au copyright par défaut, attribué à "RawTherapee, CC0"
ICCPROFCREATOR_CUSTOM;Personnalisé
@@ -924,8 +920,6 @@ MAIN_TAB_RAW;RAW
MAIN_TAB_RAW_TOOLTIP;Raccourci:Alt-r
MAIN_TAB_TRANSFORM;Transformation
MAIN_TAB_TRANSFORM_TOOLTIP;Raccourci:Alt-t
-MAIN_TAB_WAVELET;Ondelettes
-MAIN_TAB_WAVELET_TOOLTIP;Raccourci: Alt-w
MAIN_TOOLTIP_BACKCOLOR0;Couleur de fond de l'aperçu: Selon le thème\nRaccourci : 9
MAIN_TOOLTIP_BACKCOLOR1;Couleur de fond de l'aperçu: Noir\nRaccourci : 9
MAIN_TOOLTIP_BACKCOLOR2;Couleur de fond de l'aperçu: Blanc\nRaccourci: 9
@@ -1039,7 +1033,6 @@ PARTIALPASTE_SOFTLIGHT;Lumière douce
PARTIALPASTE_TM_FATTAL;Compression de plage dynamique
PARTIALPASTE_VIBRANCE;Vibrance
PARTIALPASTE_VIGNETTING;Correction du vignettage
-PARTIALPASTE_WAVELETGROUP;Niveaux d'ondelette
PARTIALPASTE_WHITEBALANCE;Balance des blancs
PREFERENCES_ADD;Ajoute
PREFERENCES_APPEARANCE;Apparence
@@ -1057,7 +1050,6 @@ PREFERENCES_BEHADDALLHINT;Règle tous les paramètres sur le mode Ajoute.
PREFERENCES_BEHAVIOR;Comportement
PREFERENCES_BEHSETALL;Tout à 'Remplace'
PREFERENCES_BEHSETALLHINT;Règle tous les paramètres sur le mode Remplace.\nLa modification des paramètres dans le panneau d'édition en par lot sera absolue, les valeurs réelles seront affichées
-PREFERENCES_BLACKBODY;Tungstène
PREFERENCES_CACHECLEAR;Vider
PREFERENCES_CACHECLEAR_ALL;Vider tous les fichiers mis en cache :
PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Vider tous les fichiers mis en cache excepté les profils de traitement :
@@ -1094,11 +1086,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Format des clés
PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Nom
PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
PREFERENCES_CUSTPROFBUILDPATH;Chemin de l'exécutable
-PREFERENCES_D50;5000K
-PREFERENCES_D50_OLD;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
PREFERENCES_DARKFRAMEFOUND;Trouvé
PREFERENCES_DARKFRAMESHOTS;image(s)
PREFERENCES_DARKFRAMETEMPLATES;modèle(s)
@@ -1121,32 +1108,15 @@ PREFERENCES_FLATFIELDFOUND;Trouvé
PREFERENCES_FLATFIELDSDIR;Dossier des images de Champ Uniforme
PREFERENCES_FLATFIELDSHOTS;image(s)
PREFERENCES_FLATFIELDTEMPLATES;modèle(s)
-PREFERENCES_FLUOF2;Fluorescent F2
-PREFERENCES_FLUOF7;Fluorescent F7
-PREFERENCES_FLUOF11;Fluorescent F11
PREFERENCES_FORIMAGE;Pour les fichiers images
PREFERENCES_FORRAW;Pour les fichiers RAW
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Taille de vignette identique entre l'Éditeur et le Navigateur de Fichier
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Avoir une hauteur différente demandera plus de temp de traitement à chaque fois que vous baculerez entre l'Éditeur unique et le Navigateur de Fichier.
PREFERENCES_GIMPPATH;Dossier d'intallation de GIMP
-PREFERENCES_GREY;Luminance Yb du périphérique de sortie (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;Luminance Yb de la scène (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;Automatique
PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogramme dans le panneau de gauche
-PREFERENCES_HISTOGRAMWORKING;Utiliser le profil de travail pour l'histogramme principal et le Navigateur
PREFERENCES_HISTOGRAM_TOOLTIP;Si activé, le profil couleur de travail est utilisé pour les données d'histogramme et le panneau Navigateur, sinon le profil de travail de sortie "gamma-corrigé" est utilisé.
PREFERENCES_HLTHRESHOLD;Seuil pour le dépassement de domaine supérieur
PREFERENCES_ICCDIR;Dossier des profils ICC
-PREFERENCES_IMG_RELOAD_NEEDED;Ces changements nécessitent un rechargement de l'image (ou l'ouverture d'une autre image) pour prendre effet.
PREFERENCES_IMPROCPARAMS;Paramètres de traitement d'image par défaut
PREFERENCES_INSPECT_LABEL;Inspecter
PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Nombre maxi de mémoire tampon
@@ -1165,7 +1135,6 @@ PREFERENCES_MENUGROUPLABEL;Label
PREFERENCES_MENUGROUPPROFILEOPERATIONS;Opérations sur les profils
PREFERENCES_MENUGROUPRANK;Classement
PREFERENCES_MENUOPTIONS;Options du menu
-PREFERENCES_METADATA;Metadonnées
PREFERENCES_MONINTENT;Intention de rendu par défaut
PREFERENCES_MONITOR;Moniteur
PREFERENCES_MONPROFILE;Profil couleur par défaut
@@ -1243,9 +1212,7 @@ PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Rendu Neutre des données Raw
PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;JPEG inclus si pleine taille, rendu Neutre des données Raw sinon
PREFERENCES_TP_LABEL;Panneau des outils:
PREFERENCES_TP_VSCROLLBAR;Cacher la barre de défilement verticale
-PREFERENCES_TUNNELMETADATA;Copier les données Exif/IPTC/XMP tel quel dans le fichier de sortie
PREFERENCES_USEBUNDLEDPROFILES;Utiliser les profils fournis
-PREFERENCES_VIEW;Point blanc du périphérique sortie (moniteur, TV, projecteur,...)
PREFERENCES_WORKFLOW;Habitudes de travail
PROFILEPANEL_COPYPPASTE;Paramètres à copier
PROFILEPANEL_GLOBALPROFILES;Profils fournis
@@ -1298,7 +1265,6 @@ SAVEDLG_FILEFORMAT;Format de fichier
SAVEDLG_FILEFORMAT_FLOAT; virgule flottante
SAVEDLG_FORCEFORMATOPTS;Forcer les options d'enregistrement
SAVEDLG_JPEGQUAL;Qualité JPEG
-SAVEDLG_PNGCOMPR;Compression PNG
SAVEDLG_PUTTOQUEUE;Placer dans la file de traitement
SAVEDLG_PUTTOQUEUEHEAD;Placer au début de la file de traitement
SAVEDLG_PUTTOQUEUETAIL;Placer au fin de la file de traitement
@@ -1455,8 +1421,6 @@ TP_COLORAPP_SURROUND_DARK;Sombre
TP_COLORAPP_SURROUND_DIM;Tamisé
TP_COLORAPP_SURROUND_EXDARK;Extrêmement Sombre (Transparent)
TP_COLORAPP_SURROUND_TOOLTIP;Change les tons et couleurs pour prendre en compte les conditions de visionnage du périphérique de sortie\n\nMoyen:\nLuminance de l'entourage moyen (standard)\nL'image ne va pas changer\n\nTamisé:\nEntourage légèrement sombre (TV)\nL'image va devenir un peu plus sombre\n\nSombre:\nEntourage sombre (projecteur)\nL'image va devenir plus sombre\n\nExtrêmement sombre:\nEntourage noir (transparents)\nL'image va devenir encore plus sombre
-TP_COLORAPP_SURSOURCE;Entourage sombre
-TP_COLORAPP_SURSOURCE_TOOLTIP;Peut être utilisé si l'image source a un bord noir.
TP_COLORAPP_TCMODE_BRIGHTNESS;Brillance
TP_COLORAPP_TCMODE_CHROMA;Chroma
TP_COLORAPP_TCMODE_COLORF;Niveau de couleurs
@@ -1557,7 +1521,6 @@ TP_DEHAZE_SHOW_DEPTH_MAP;Montrer la Carte de Profondeur
TP_DEHAZE_STRENGTH;Force
TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Multi-zones auto
TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Global automatique
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Essaie d'évaluer le bruit chroma\nFaites attention, cela calcul une moyenne, et est très subjectif !
TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Bleu-Jaune
TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Courbe de chrominance
TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Augmente (multiplie) la valeur de tous les curseurs de chrominance.\nCette courbe vous permet d'ajuster la force de la réduction de bruit chromatique en fonction de la chromaticité, par exemple pour augmenter l'action dans les zones faiblement saturées et pour la diminuer dans celles très saturées.
@@ -1575,8 +1538,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Bruit de l'aperçu: Moyen=%1 Hau
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Bruit de l'aperçu: Moyen= - Haut= -
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Taille des tuiles =%1, Centre: Tx=%2 Ty=%3
TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Rouge-Vert
-TP_DIRPYRDENOISE_ENH;Mode amélioré
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Augmente la qualité du débruitage, mais augmente le temps de traitement d'environ 20%
TP_DIRPYRDENOISE_LABEL;Réduction de Bruit
TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Contrôle de luminance
TP_DIRPYRDENOISE_LUMINANCE_CURVE;Courbe de luminance
@@ -1585,7 +1546,6 @@ TP_DIRPYRDENOISE_LUMINANCE_FRAME;Luminance
TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminance
TP_DIRPYRDENOISE_MAIN_COLORSPACE;Espace colorimétrique
TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;Lab
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_LABEL;Réduction du bruit
TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RVB
TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;Pour les images raw, les méthodes RVB ou Lab peuvent être utilisées.\n\nPour les images non-raw la méthode Lab sera utilisée, indépendamment de ce qu'indique ce bouton.
TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
@@ -1606,8 +1566,6 @@ TP_DIRPYRDENOISE_MEDIAN_PASSES;Itérations
TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Appliquer trois itérations avec une taille de fenêtre de 3×3 aboutit souvent à de meilleurs résultats qu'une seule itération avec une taille de fenêtre de 7×7.
TP_DIRPYRDENOISE_MEDIAN_TYPE;Type de médiane
TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Applique un filtre médian de la taille de "fenêtre" désirée. Plus cette taille est grande, plus cela prendra de temps.\n\n3×3 doux: traite 5 pixels dans une fenêtre de 3×3 pixels.\n3×3: traite 9 pixels dans une fenêtre de 3×3 pixels.\n5×5 doux: traite 13 pixels dans une fenêtre de 5×5 pixels.\n5×5: traite 25 pixels dans une fenêtre de 5×5 pixels.\n7×7: traite 49 pixels dans une fenêtre de 7×7 pixels.\n9×9: traite 81 pixels dans une fenêtre 9×9 pixels.\n\nIl est parfois possible d'atteindre une meilleurs qualité en appliquant plusieurs itérations d'une petite fenêtre qu'une seule itération d'une grande.
-TP_DIRPYRDENOISE_PASSE;Itérations
-TP_DIRPYRDENOISE_SLI;Curseur
TP_DIRPYRDENOISE_TYPE_3X3;3×3
TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 doux
TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1681,10 +1639,6 @@ TP_FLATFIELD_BT_VERTICAL;Vertical
TP_FLATFIELD_CLIPCONTROL;Control de l'écrêtage
TP_FLATFIELD_CLIPCONTROL_TOOLTIP;"Contrôle de l'écrêtage" évite les hautes lumière brûlées dûs à l'application du champ uniforme. S'il y a déjà des hautes lumières brûlées avant l'application du champ uniforme, "Contrôle de l'écrêtage" peut conduire à une dérive couleur.
TP_FLATFIELD_LABEL;Champ Uniforme
-TP_GAMMA_CURV;Gamma:
-TP_GAMMA_CUSTOM;Manuel
-TP_GAMMA_OUTPUT_TRC_PRESET;Courbe de réponse tonale (TRC):
-TP_GAMMA_SLOP;Pente (linéaire):
TP_GENERAL_11SCALE_TOOLTIP;Les effets de cet outil ne sont visible ou fiable qu'avec un aperçu à l'échelle 1:1.
TP_GRADIENT_CENTER;Centre
TP_GRADIENT_CENTER_X;Centre X
@@ -1716,8 +1670,6 @@ TP_ICM_APPLYHUESATMAP;Table de base
TP_ICM_APPLYHUESATMAP_TOOLTIP;Utilise la table de base (HueSatMap) contenu dans le profil DCP. Ce réglage n'est possible que si le profil DCP sélectionné en contient une.
TP_ICM_APPLYLOOKTABLE;Table de correspondance
TP_ICM_APPLYLOOKTABLE_TOOLTIP;Utilise la table de correspondance (LUT) contenu dans le profil DCP. Ce réglage n'est possible que si le profil DCP sélectionné en contient une.
-TP_ICM_BLENDCMSMATRIX;Mélange des hautes lumières\ndu profil ICC avec la matrice
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Activer la récupération des zones brûlées lorsque les profils ICC basés sur la LUT sont utilisés
TP_ICM_BPC;Compensation du Point Noir
TP_ICM_DCPILLUMINANT;Illuminant
TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolé
@@ -1843,7 +1795,6 @@ TP_RAWCACORR_AUTOIT_TOOLTIP;Ce réglage est disponible si "Correction-auto" est
TP_RAWCACORR_AVOIDCOLORSHIFT;Éviter les dérives couleurs
TP_RAWCACORR_CABLUE;Bleu
TP_RAWCACORR_CARED;Rouge
-TP_RAWCACORR_CASTR;Force
TP_RAWEXPOS_BLACKS;Niveaux de noir
TP_RAWEXPOS_BLACK_0;Vert 1 (maître)
TP_RAWEXPOS_BLACK_1;Rouge
@@ -1891,7 +1842,6 @@ TP_RAW_LMMSE_TOOLTIP;Ajoute gamma (niveau 1) + médian (niveau 2-4) + affinage (
TP_RAW_MONO;Mono
TP_RAW_NONE;Aucun (montre ce que voit le capteur)
TP_RAW_PIXELSHIFT;Pixel Shift
-TP_RAW_PIXELSHIFTADAPTIVE;Détection adaptative
TP_RAW_PIXELSHIFTBLUR;Flouter le masque de mouvement
TP_RAW_PIXELSHIFTDMETHOD;Méthode de dématriçage pour les mouvements
TP_RAW_PIXELSHIFTEPERISO;Sensibilité
@@ -1900,34 +1850,17 @@ TP_RAW_PIXELSHIFTEQUALBRIGHT;Égaliser la luminosité des sous-images
TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Égaliser par canal
TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Activé: Égalise les canaux RVB individuellement.\nDésactivé: Utilise le même facteur d'égalisation pour tous les canaux.
TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Égalise la luminosité des sous-images à la luminosité de la sous-image sélectionnée.\nS'il y a des zones surexposées dans les sous-images, sélectionne la sous-image la plus lumineuse pour éviter des dérives coiuleurs magenta dans les zone surexposées ou permettre la détection de mouvement.
-TP_RAW_PIXELSHIFTEXP0;Expérimental
TP_RAW_PIXELSHIFTGREEN;Vérifier le canal vert pour le mouvement
TP_RAW_PIXELSHIFTHOLEFILL;Rempli les trous dans le masque de mouvement
TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Rempli les trous dans le masque de mouvement
-TP_RAW_PIXELSHIFTLMMSE;Utilise LMMSE pour les zone de mouvement
-TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Utilise LMMSE au lieu d'AMaZE pour les zone de mouvement.\nutil pour les images de haut ISO.
-TP_RAW_PIXELSHIFTMASKTHRESHOLD;Nouveau seuil 3x3
TP_RAW_PIXELSHIFTMEDIAN;Utilise la médiane pour les zones de mouvement
-TP_RAW_PIXELSHIFTMEDIAN3;Exclure la sous-image sélectionnée de la médiane
-TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Exclu la sous-image sélectionné de la médiane.\nUtil si mes objets en mouvement se chevauchent dans les sous-images 2 et 3
TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Utilise la médianes de toutes les sous-images au lieu de la sous-images sélectionnée pour les zones de mouvement.\nRetir les objets qui sont à des endroits différents dans toutes les sous-images.\nDonne un effet de mouvement aux objets se déplaçant lentement (se chevauchant).
TP_RAW_PIXELSHIFTMM_AUTO;Automatique
TP_RAW_PIXELSHIFTMM_CUSTOM;Manuel
TP_RAW_PIXELSHIFTMM_OFF;Arrêt
TP_RAW_PIXELSHIFTMOTION;Niveau de détection de mouvement (dépréconisé)
-TP_RAW_PIXELSHIFTMOTIONCORRECTION;Taille de la correction de mouvement vert
TP_RAW_PIXELSHIFTMOTIONMETHOD;Correction de Mouvement
-TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 signifie pas de détection de mouvement.\n1 - 99 signifie que le mouvement sera détecté par-rapport à cette valeur. Augmentez cette valeur pour augmenter le taux de détection.\n100 signifie que la sous-image sélectionnée et dématricée en AMaZE sera utilisée tel quel.
-TP_RAW_PIXELSHIFTNONGREENAMAZE;Vérifier rouge/bleu AMaZE
TP_RAW_PIXELSHIFTNONGREENCROSS;Vérifier les canaux rouge/bleu pour le mouvement
-TP_RAW_PIXELSHIFTNONGREENCROSS2;Vérifier vert AMaZE
-TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Vérifier rouge/bleu horizontal
-TP_RAW_PIXELSHIFTNONGREENVERTICAL;Vérifier rouge/bleu vertical
-TP_RAW_PIXELSHIFTNREADISO;Lire
-TP_RAW_PIXELSHIFTONEGREEN;Utiliser un seul canal vert
-TP_RAW_PIXELSHIFTONEGREEN_TOOLTIP;Utilise un seul canal vert au lieu de faire la moyennes des deux canaux verts pour détecter les régions sans mouvement.
-TP_RAW_PIXELSHIFTPRNU;PRNU (%)
-TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Poid Rouge&Bleu
TP_RAW_PIXELSHIFTSHOWMOTION;Voir le masque de mouvement
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Voir uniquement le masque
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Affiche le masque sans l'image.
@@ -1936,9 +1869,6 @@ TP_RAW_PIXELSHIFTSIGMA;Rayon de floutage
TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;Le rayon par défaut de 1.0 fonctionne généralement bien pour l'ISO de base.\nAugmentez cette valeur pour les images de haut ISO, 5.0 est un bon point de départ.\nContrôlez le masque de mouvement à chaque nouvelle valeur.
TP_RAW_PIXELSHIFTSMOOTH;Adoucir les transitions
TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Adouci les transitions entre les zones avec mouvement et les zones sans.\nRéglez à 0 pour désactiver l'adoucissement des transitions.\nRéglez à 1 pour obtenir soit le résultat du dématriçage AMaZE/LMMSE de la sous-image sélectionnée (selon que "Utilise LMMSE" est sélectionné), ou la médiane des 4 sous-images si "Utilise la médiane ..." est sélectionné.
-TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;Facteur DevStd Bleu
-TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;Facteur DevStd Vert
-TP_RAW_PIXELSHIFTSTDDEVFACTORRED;Facteur DevStd Rouge
TP_RAW_RCD;RCD
TP_RAW_RCDVNG4;RCD+VNG4
TP_RAW_SENSOR_BAYER_LABEL;Capteur à matrice de Bayer
@@ -1976,7 +1906,6 @@ TP_RETINEX_GAIN;Gain
TP_RETINEX_GAINOFFS;Gain et Décalage (brillance)
TP_RETINEX_GAINTRANSMISSION;Gain sur Transmission
TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplifie ou réduit le canal transmission pour atteindre la luminance souhaitée.\nAbscisses: transmission ; min = 0, max = valeurs.\nOrdonnées: gain.
-TP_RETINEX_GAIN_TOOLTIP;Agit sur l'image recomposée.\n\nCeci est très différent des autres paramètres. Utilisé pour les pixels noirs et blancs, et pour aider à balancer l'histogramme.
TP_RETINEX_GAMMA;Gamma
TP_RETINEX_GAMMA_FREE;Manuel
TP_RETINEX_GAMMA_HIGH;Haute
@@ -2054,10 +1983,8 @@ TP_SAVEDIALOG_OK_TIP;Raccourci: Ctrl-Entrée
TP_SHADOWSHLIGHTS_HIGHLIGHTS;Hautes lumières
TP_SHADOWSHLIGHTS_HLTONALW;Amplitude tonale des\nhautes lumières
TP_SHADOWSHLIGHTS_LABEL;Ombres/Hautes lumières
-TP_SHADOWSHLIGHTS_LOCALCONTR;Contraste local
TP_SHADOWSHLIGHTS_RADIUS;Rayon
TP_SHADOWSHLIGHTS_SHADOWS;Ombres
-TP_SHADOWSHLIGHTS_SHARPMASK;Masque haute précision
TP_SHADOWSHLIGHTS_SHTONALW;Amplitude tonale des ombres
TP_SHARPENEDGE_AMOUNT;Quantité
TP_SHARPENEDGE_LABEL;Bords
diff --git a/rtdata/languages/Greek b/rtdata/languages/Greek
deleted file mode 100644
index b4e62a90d..000000000
--- a/rtdata/languages/Greek
+++ /dev/null
@@ -1,2328 +0,0 @@
-#01 2008-05-14 zeusalmighty
-
-CURVEEDITOR_LINEAR;Γραμμικό
-CURVEEDITOR_LOADDLGLABEL;Φόρτωση καμπύλης...
-CURVEEDITOR_SAVEDLGLABEL;Αποθήκευση καμπλης...
-CURVEEDITOR_TOOLTIPLINEAR;Επαναφορά καμπύλης σε γραμμική
-CURVEEDITOR_TOOLTIPLOAD;Φόρτωση καμπύλης απο αρχείο
-CURVEEDITOR_TOOLTIPSAVE;Αποθήκευση παρούσας καμπύλης
-DIRBROWSER_FOLDERS;Φάκελοι
-EXIFFILTER_APERTURE;Aperture
-EXIFFILTER_CAMERA;Camera
-EXIFFILTER_FOCALLEN;Focal Length
-EXIFFILTER_ISO;ISO
-EXIFFILTER_LENS;Lens
-EXIFFILTER_SHUTTER;Shutter
-EXIFPANEL_ADDEDIT;Προσθήκη/Επεξεργασία
-EXIFPANEL_ADDEDITHINT;Προσθήκη καινούριας ετικέττας ή επεξεργασία
-EXIFPANEL_ADDTAGDLG_ENTERVALUE;Εισαγωγή τιμής
-EXIFPANEL_ADDTAGDLG_SELECTTAG;Επιλογή ετικέττας
-EXIFPANEL_ADDTAGDLG_TITLE;Προσθήκη/Επεξεργασία ετικέττας
-EXIFPANEL_KEEP;Συγκράτηση
-EXIFPANEL_KEEPHINT;Συγκράτηση των επιλεγμένων ετικεττών κατά την εγγραφή του παραγώμενου αρχείου
-EXIFPANEL_REMOVE;Αφαίρεση
-EXIFPANEL_REMOVEHINT;Αφαίρεση των επιλεγμένων ετικεττών κατά την εγγραφή του παραγώμενου αρχείου
-EXIFPANEL_RESET;Επαναφορά
-EXIFPANEL_RESETALL;Επαναφορά όλων
-EXIFPANEL_RESETALLHINT;Επαναφορά όλων των ετικεττών στην αρχική τους τιμή
-EXIFPANEL_RESETHINT;Επαναφορά των επιλεγμένων ετικεττών στις πρωτότυπες τους τιμές
-EXIFPANEL_SUBDIRECTORY;Subdirectory
-FILEBROWSER_APPLYPROFILE;Apply profile
-FILEBROWSER_CLEARPROFILE;Clear profile
-FILEBROWSER_COPYPROFILE;Copy profile
-FILEBROWSER_DELETEDLGLABEL;File delete confirmation
-FILEBROWSER_DELETEDLGMSG;Are you sure you want to delete the selected %1 files?
-FILEBROWSER_EMPTYTRASH;Empty Trash
-FILEBROWSER_EMPTYTRASHHINT;Permanently delete the files of the trash
-FILEBROWSER_PARTIALPASTEPROFILE;Partial paste
-FILEBROWSER_PASTEPROFILE;Paste profile
-FILEBROWSER_POPUPCANCELJOB;Cancel job
-FILEBROWSER_POPUPMOVEEND;Move to end of queue
-FILEBROWSER_POPUPMOVEHEAD;Move to head of queue
-FILEBROWSER_POPUPOPEN;Open
-FILEBROWSER_POPUPOPENINEDITOR;Open in Editor
-FILEBROWSER_POPUPPROCESS;Put to processing queue
-FILEBROWSER_POPUPREMOVE;Remove from filesystem
-FILEBROWSER_POPUPRENAME;Rename
-FILEBROWSER_POPUPSELECTALL;Select all
-FILEBROWSER_POPUPTRASH;Move to trash
-FILEBROWSER_POPUPUNRANK;Unrank
-FILEBROWSER_POPUPUNTRASH;Remove from trash
-FILEBROWSER_RENAMEDLGLABEL;Rename file
-FILEBROWSER_SHOWDIRHINT;Show all images of the directory
-FILEBROWSER_SHOWRANK1HINT;Show images ranked as 1 star
-FILEBROWSER_SHOWRANK2HINT;Show images ranked as 2 star
-FILEBROWSER_SHOWRANK3HINT;Show images ranked as 3 star
-FILEBROWSER_SHOWRANK4HINT;Show images ranked as 4 star
-FILEBROWSER_SHOWRANK5HINT;Show images ranked as 5 star
-FILEBROWSER_SHOWTRASHHINT;Show content of the trash
-FILEBROWSER_SHOWUNRANKHINT;Show unranked images
-FILEBROWSER_THUMBSIZE;Thumb. size
-FILEBROWSER_ZOOMINHINT;Increase thumbnail size
-FILEBROWSER_ZOOMOUTHINT;Decrease thumbnail size
-GENERAL_ABOUT;About
-GENERAL_CANCEL;Ακύρωση
-GENERAL_DISABLE;Απενεργοποίηση
-GENERAL_DISABLED;Απενεργοποιημένο
-GENERAL_ENABLE;Ενεργοποίηση
-GENERAL_ENABLED;Ενεργοποιημένο
-GENERAL_LANDSCAPE;Τοπίο
-GENERAL_NA;μη διαθέσιμο
-GENERAL_NO;Όχι
-GENERAL_OK;Εντάξει
-GENERAL_PORTRAIT;Πορτραίτο
-GENERAL_SAVE;Αποθήκευση
-HISTOGRAM_TOOLTIP_B;Προβολή/απόκρυψη ΜΠΛΕ ιστογράμματος
-HISTOGRAM_TOOLTIP_G;Προβολή/απόκρυψη ΠΡΑΣΙΝΟΥ ιστογράμματος
-HISTOGRAM_TOOLTIP_L;Προβολή/απόκρυψη CIELAB ιστογράμματος φωτεινότητας
-HISTOGRAM_TOOLTIP_R;Προβολή/απόκρυψη KOKKINOY ιστογράμματος
-HISTORY_CHANGED;Αλλαγή
-HISTORY_CUSTOMCURVE;Προσαρμοσμένη καμπύλη
-HISTORY_FROMCLIPBOARD;From clipboard
-HISTORY_LABEL;Ιστορικό
-HISTORY_MSG_1;Φορτώθηκε εικόνα
-HISTORY_MSG_2;Φορτώθηκε προφίλ
-HISTORY_MSG_3;Αλλαγή προφίλ
-HISTORY_MSG_4;Αναζήτηση ιστορικού
-HISTORY_MSG_5;Φωτεινότητα
-HISTORY_MSG_6;Αντίθεση
-HISTORY_MSG_7;Μαύρα
-HISTORY_MSG_8;Επανόρθωση Έκθεσης
-HISTORY_MSG_9;Συμπίεση φωτεινών σημείων
-HISTORY_MSG_10;Συμπίεση σκιών
-HISTORY_MSG_11;Καμπύλη τονικότητας
-HISTORY_MSG_12;Αυτόματη έκθεση
-HISTORY_MSG_13;Ψαλιδισμός έκθεσης
-HISTORY_MSG_14;Φωτεινότητα Φωτεινότητας
-HISTORY_MSG_15;Φωτεινότητα αντίθεσης
-HISTORY_MSG_16;Φωτεινότητα μαύρων
-HISTORY_MSG_17;Φωτεινότητα συμπίεσησ φωτεινών σημείων.
-HISTORY_MSG_18;Φωτεινότητα συμπίεσης σκιών.
-HISTORY_MSG_19;Καμπύλη φωτεινότητας
-HISTORY_MSG_20;Όξυνση
-HISTORY_MSG_21;Ακτίνα όξυνσης
-HISTORY_MSG_22;Ένταση όξυνσης
-HISTORY_MSG_23;Κατώφλι όξυνσης
-HISTORY_MSG_24;Όξυνση μόνο ορίων
-HISTORY_MSG_25;Ακτίνα ανίχνευσης ορίων όξυνσης
-HISTORY_MSG_26;Όξυνση, Ανοχή ορίων
-HISTORY_MSG_27;Όξυνση, Έλεγχος άλως
-HISTORY_MSG_28;Ένταση ελέγχου άλως
-HISTORY_MSG_29;Μέθοδοςν όξυνσης
-HISTORY_MSG_30;Ακτίνα Deconvolution
-HISTORY_MSG_31;Ένταση Deconvolution
-HISTORY_MSG_32;Καταστολή Deconvolution
-HISTORY_MSG_33;Επαναλήψεις Deconvolution
-HISTORY_MSG_34;Αποφυγή ψαλιδίσματος χρώματος
-HISTORY_MSG_35;Περιοσμός κορεσμού
-HISTORY_MSG_36;Ένταση περιοσμού κορεσμού
-HISTORY_MSG_37;Ενίσχυση χρώματος
-HISTORY_MSG_38;Μέθοδος εξισορρόπησης λευκού
-HISTORY_MSG_39;Θερμοκρασία χρώματος
-HISTORY_MSG_40;Απόχρωση εξισορρόπησης λευκού
-HISTORY_MSG_41;Χρωματική μετατόπιση "A"
-HISTORY_MSG_42;Χρωματική μετατόπιση "B"
-HISTORY_MSG_43;Αποθορύβηση φωτεινότητας
-HISTORY_MSG_44;Ακτίνα αποθορύβησης φωτεινότητας
-HISTORY_MSG_45;Ανοχή ορίων αποθορύβησης φωτεινότητας
-HISTORY_MSG_46;Αποθορύβηση χρώματος
-HISTORY_MSG_47;Ακτίνα αποθορύβησης χρώματος
-HISTORY_MSG_48;Ανοχή ορίων αποθορύβησης χρώματος
-HISTORY_MSG_49;Αποθορύβηση χρώματος (ευαισθησία ορίων)
-HISTORY_MSG_50;Εργαλείο σκιών/φωτεινών σημείων
-HISTORY_MSG_51;Μείωση φωτεινών σημείων
-HISTORY_MSG_52;Ενίσχυση σκιών
-HISTORY_MSG_53;Τονικό εύρος φωτεινών σημείων
-HISTORY_MSG_54;Τονικό εύρος σκιών
-HISTORY_MSG_55;Τοπική αντίθεση
-HISTORY_MSG_56;Ακτίνα σκιών/φωτεινών σημείων
-HISTORY_MSG_57;Coarse Rotation
-HISTORY_MSG_58;Οριζόντια ανατροπή
-HISTORY_MSG_59;Κατακόρυφη ανατροπή
-HISTORY_MSG_60;Περιστροφή
-HISTORY_MSG_61;Περιστροφή
-HISTORY_MSG_62;Διόρθωση παραμόρφωσης φακού
-HISTORY_MSG_63;Επιλέχθηκε στιγμιότυπο
-HISTORY_MSG_64;Αποκοπή εικόνας
-HISTORY_MSG_65;C/A Διόρθωση
-HISTORY_MSG_66;Ανάκτηση Φωτεινών σημείων
-HISTORY_MSG_67;Ένταση ανάκτησης φωτεινών σημείων
-HISTORY_MSG_68;Μέθοδος ανάκτηση φωτεινών σημείων
-HISTORY_MSG_69;Παρόν χρωματικό προφίλ
-HISTORY_MSG_70;Χρωματικό προφίλ εξόδου
-HISTORY_MSG_71;Χρωματικό προφίλ εισόδου
-HISTORY_MSG_72;Διόρθωση Vignetting
-HISTORY_MSG_73;Μίξη καναλιών
-HISTORY_MSG_74;Αλλαγή μεγέθους/κλίμακας
-HISTORY_MSG_75;Μέθοδος αλλαγής μεγέθους
-HISTORY_MSG_76;Αλλαγή στοιχείων Exif
-HISTORY_MSG_77;Αλλαγή στοιχίεων IPTC
-HISTORY_MSG_78;Data specified for resize
-HISTORY_MSG_79;Resize width
-HISTORY_MSG_80;Resize height
-HISTORY_MSG_81;Resize enabled
-HISTORY_NEWSNAPSHOT;Νέο στιγμιότυπο
-HISTORY_SNAPSHOT;Στιγμιότυπο
-HISTORY_SNAPSHOTS;Στιγμιότυπα
-IPTCPANEL_CATEGORY;Κατηγορία
-IPTCPANEL_CITY;Πόλη
-IPTCPANEL_COPYHINT;Αντιγραφή ρυθμίσεων IPTC στην περιοχή αποκομμάτων
-IPTCPANEL_COUNTRY;Χώρα
-IPTCPANEL_CREDIT;Εύσημα
-IPTCPANEL_CREDITHINT;Ταυτοποιεί τον παροχέα της εικόνας, όχι απραίτητα δημιουργό/ιδιοκτήτη (Εύσημα).
-IPTCPANEL_DATECREATED;Ημερομηνία δημιουργίας
-IPTCPANEL_EMBEDDED;Ενσωματωμένο
-IPTCPANEL_EMBEDDEDHINT;Επαναφορά στοιχείων IPTC αρχείου εικόνας
-IPTCPANEL_HEADLINE;Επικεφαλίδα
-IPTCPANEL_INSTRUCTIONS;Οδηγίες
-IPTCPANEL_KEYWORDS;Λέξεις-κλειδιά
-IPTCPANEL_PASTEHINT;Επικόλληση ρυθμίσεων IPTC από την περιοχή αποκομμάτων
-IPTCPANEL_RESET;Επαναφορά
-IPTCPANEL_RESETHINT;Επαναφορά προεπιλεγμένου προφίλ
-IPTCPANEL_SOURCE;Πηγή
-IPTCPANEL_TITLE;Τίτλος
-MAIN_BUTTON_PREFERENCES;Ρυθμίσεις
-MAIN_BUTTON_SAVE;Αποθήκευση εικόνας
-MAIN_BUTTON_SENDTOEDITOR;Send to editor
-MAIN_FRAME_BATCHQUEUE;Batch Queue
-MAIN_FRAME_FILEBROWSER;File Browser
-MAIN_FRAME_PLACES;Places
-MAIN_FRAME_PLACES_ADD;Add
-MAIN_FRAME_RECENT;Recent Folders
-MAIN_MSG_ALREADYEXISTS;Το αρχείο ήδη υπάρχει.
-MAIN_MSG_CANNOTLOAD;Αδύνατη η φόρτωση εικόνας
-MAIN_MSG_CANNOTSAVE;Αδύνατη η αποθήκευση αρχείου
-MAIN_MSG_CANNOTSTARTEDITOR;Can not start editor.
-MAIN_MSG_CANNOTSTARTEDITOR_SECONDARY;Please set the correct path in the "Preferences" dialog.
-MAIN_MSG_QOVERWRITE;Θέλετε να το αντικαταστήσετε;
-MAIN_TAB_COLOR;Color
-MAIN_TAB_DETAIL;Detail
-MAIN_TAB_DEVELOP;Develop
-MAIN_TAB_EXIF;Exif
-MAIN_TAB_EXPOSURE;Exposure
-MAIN_TAB_FILTER;Filter
-MAIN_TAB_IPTC;IPTC
-MAIN_TAB_METADATA;Metadata
-MAIN_TAB_TRANSFORM;Μετατροπή
-MAIN_TOOLTIP_HIDEHP;Προβολή/απόκρυψη αριστερού πλαισίου (περιλαμβανομένου του ιστορικού, shortcut key: H)
-MAIN_TOOLTIP_INDCLIPPEDH;Ένδειξη ψαλισμού φωτεινών σημείων
-MAIN_TOOLTIP_INDCLIPPEDS;Ένδειξη ψαλισμού σκιών
-MAIN_TOOLTIP_QINFO;Γρήγορες πληροφορίες στην εικόνα
-PARTIALPASTE_BASICGROUP;Basic settings
-PARTIALPASTE_CACORRECTION;C/A correction
-PARTIALPASTE_COARSETRANS;90 deg rotation / flipping
-PARTIALPASTE_COLORGROUP;Color related settings
-PARTIALPASTE_COMPOSITIONGROUP;Composition settings
-PARTIALPASTE_CROP;Crop
-PARTIALPASTE_DIALOGLABEL;Partial paste processing profile
-PARTIALPASTE_DISTORTION;Distortion correction
-PARTIALPASTE_EXIFCHANGES;Changes to exif data
-PARTIALPASTE_EXPOSURE;Exposure
-PARTIALPASTE_ICMSETTINGS;ICM settings
-PARTIALPASTE_IPTCINFO;IPTC info
-PARTIALPASTE_LENSGROUP;Lens related settings
-PARTIALPASTE_METAGROUP;Metadata
-PARTIALPASTE_RESIZE;Resize
-PARTIALPASTE_ROTATION;Rotation
-PARTIALPASTE_SHADOWSHIGHLIGHTS;Shadows/Highlights
-PARTIALPASTE_SHARPENING;Sharpening
-PARTIALPASTE_VIGNETTING;Vignetting correction
-PARTIALPASTE_WHITEBALANCE;White balance
-PREFERENCES_APPLNEXTSTARTUP;εφαρμόζεται στην επόμενη εκκίνηση
-PREFERENCES_CACHEMAXENTRIES;Maximal Number of Cache Entries
-PREFERENCES_CACHEOPTS;Cache Options
-PREFERENCES_CACHETHUMBHEIGHT;Maximal Thumbnail Height
-PREFERENCES_CLIPPINGIND;Ένδειξη ψαλιδίσματος
-PREFERENCES_DATEFORMAT;Διάταξη ημερομηνίας
-PREFERENCES_DATEFORMATHINT;YΜπορείτε να χρησιμοποιήσετε τις εξής εντολές μορφοποίησης:\n%y : χρονολογία\n%m : μήνας\n%d : ημέρα\n\nΓια παράδειγμα, η μορφοποίηση ημερομηνίας στην Ελλάδα είναι:\n%y/%m/%d
-PREFERENCES_DIRHOME;Τοποθεσία "Home"
-PREFERENCES_DIRLAST;Τελευταία τοποθεσία που χρησιμοποιήθηκε
-PREFERENCES_DIROTHER;Άλλο
-PREFERENCES_DIRSELECTDLG;Επιλέξτε τοποθεσία εικόνων κατά την έναρξη...
-PREFERENCES_DIRSOFTWARE;Τοποθεσία εγκατάστασης
-PREFERENCES_EXTERNALEDITOR;External editor
-PREFERENCES_FBROWSEROPTS;Επιλογές περιήγησης αρχείων
-PREFERENCES_FILEFORMAT;Είδος αρχείου
-PREFERENCES_FORIMAGE;Για αρχεία εικόνων
-PREFERENCES_FORRAW;Για αρχεία RAW
-PREFERENCES_GIMPPATH;GIMP installation directory
-PREFERENCES_HLTHRESHOLD;Κατώφλι ψαλιδίσματος φωτεινών σημείων
-PREFERENCES_ICCDIR;Τοποθεσία των προφίλ ICC
-PREFERENCES_IMPROCPARAMS;Προεπιλεγμένες παραμέτροι επεξεργασίας εικόνας
-PREFERENCES_INTENT_ABSOLUTE;Absolute Colorimetric
-PREFERENCES_INTENT_PERCEPTUAL;Perceptual
-PREFERENCES_INTENT_RELATIVE;Relative Colorimetric
-PREFERENCES_INTENT_SATURATION;Saturation
-PREFERENCES_OUTDIR;Τοποθεσία εξόδου
-PREFERENCES_OUTDIRFOLDER;Save to folder
-PREFERENCES_OUTDIRFOLDERHINT;Put the saved images to the seledted folder
-PREFERENCES_OUTDIRTEMPLATE;Use Template
-PREFERENCES_OUTDIRTEMPLATEHINT;You can use the following formatting strings:\n%f, %d1, %d2, ..., %p1, %p2, ...\n\nThese formatting strings refer to the directories and sub-paths of the path of the raw file.\n\nFor example, if /home/tom/image/02-09-2006/dsc0012.nefhas been opened, the meaning of the formatting strings are:\n%f=dsc0012, %d1=02-09-2006, %d2=image, ...\n%p1=/home/tom/image/02-09-2006, %p2=/home/tom/image, p3=/home/tom, ...\n\nIf you want to save the output image where the original is, write:\n%p1/%f\n\nIf you want to save the output image in a directory 'converted' located the directory of the original, write:\n%p1/converted/%f\n\nIf you want to save the output image in directory '/home/tom/converted' with keeping the same subdirectory of dates, write:\n%p2/converted/%d1/%f
-PREFERENCES_PARSEDEXT;Parsed Extensions
-PREFERENCES_PARSEDEXTADD;Add Extension
-PREFERENCES_PARSEDEXTADDHINT;Type an extension and press this button to append list
-PREFERENCES_PARSEDEXTDELHINT;Delete selected extension from the list
-PREFERENCES_PROFILEHANDLING;Processing Profile Handling
-PREFERENCES_PROFILELOADPR;Profile Loading Priority
-PREFERENCES_PROFILEPRCACHE;Profile in Cache
-PREFERENCES_PROFILEPRFILE;Profile Next to the Input File
-PREFERENCES_PROFILESAVECACHE;Save Processing Parameters to the Cache
-PREFERENCES_PROFILESAVEINPUT;Save Processing Parameters Next to the Input File
-PREFERENCES_PSPATH;Adobe Photoshop installation directory
-PREFERENCES_SELECTLANG;Επιλογή γλώσσας
-PREFERENCES_SHOWBASICEXIF;Προβολή βασικών στοιχείων Exif
-PREFERENCES_SHOWDATETIME;Προβολή ημερομηνίας και ώρας
-PREFERENCES_SHTHRESHOLD;Κατώφλι ψαλιδίσματος σκιών
-PREFERENCES_STARTUPIMDIR;Τοποθεσία εικόνων κατά την έναρξη
-PREFERENCES_TAB_BROWSER;Περιήγηση αρχείου
-PREFERENCES_TAB_COLORMGR;Διαχείριση χρώματος
-PREFERENCES_TAB_GENERAL;Γενικά
-PREFERENCES_TAB_IMPROC;Επεξεργασίας εικόνας
-PROFILEPANEL_LABEL;Προφίλ επεξεργασίας
-PROFILEPANEL_LOADDLGLABEL;Φόρτωση παραμέτρων επεξεργασίας...
-PROFILEPANEL_PCUSTOM;Προσαρμοσμένο
-PROFILEPANEL_PFILE;Απο αρχείο
-PROFILEPANEL_PLASTSAVED;Τελευταία αποθηκευμένη
-PROFILEPANEL_SAVEDLGLABEL;Αποθήκευση παραμέτρων επεξεργασίας...
-PROFILEPANEL_TOOLTIPCOPY;Copy current profile to clipboard
-PROFILEPANEL_TOOLTIPLOAD;Φόρτωση προφίλ απο αρχείο
-PROFILEPANEL_TOOLTIPPASTE; Paste profile from clipboard
-PROFILEPANEL_TOOLTIPSAVE;Αποθήκευση παρόντος προφίλ
-PROGRESSBAR_LOADING;Φόρτωση εικόνας...
-PROGRESSBAR_LOADJPEG;Φόρτωση αρχείου JPEG...
-PROGRESSBAR_LOADPNG;Φόρτωση αρχείου PNG...
-PROGRESSBAR_LOADTIFF;Φόρτωση αρχείου TIFF...
-PROGRESSBAR_PROCESSING;Επεξεργάζεται εικόνα...
-PROGRESSBAR_READY;Έτοιμο
-PROGRESSBAR_SAVEJPEG;Αποθήκευση αρχείου JPEG...
-PROGRESSBAR_SAVEPNG;Αποθήκευση αρχείου PNG...
-PROGRESSBAR_SAVETIFF;Αποθήκευση αρχείου TIFF...
-QINFO_ISO;ISO
-QINFO_NOEXIF;Στοιχεία Exif μη διαθέσιμα.
-SAVEDLG_FILEFORMAT;Είδος αρχείου
-SAVEDLG_JPEGQUAL;Ποιότητα JPEG
-SAVEDLG_PNGCOMPR;Συμπίεση PNG
-SAVEDLG_PUTTOQUEUE;Put into processing queue
-SAVEDLG_PUTTOQUEUEHEAD;Put to the head of the processing queue
-SAVEDLG_PUTTOQUEUETAIL;Put to the end of the processing queue
-SAVEDLG_SAVEIMMEDIATELY;Save immediately
-SAVEDLG_SAVESPP;Αποθήκευση παραμέτρων επεξεργασίας μαζί με την εικόνα
-TOOLBAR_TOOLTIP_CROP;Αποκοπή επιλογής (shortcut key: C)
-TOOLBAR_TOOLTIP_HAND;Εργαλείο μετακίνησης (shortcut key: N)
-TOOLBAR_TOOLTIP_STRAIGHTEN;Επιλογή ευθείας γραμμής (shortcut key: S)
-TOOLBAR_TOOLTIP_WB;Εξισορροπία λευκού από σημείο (shortcut key: W)
-TP_CACORRECTION_BLUE;Μπλέ
-TP_CACORRECTION_LABEL;C/A Διόρθωση
-TP_CACORRECTION_RED;Κόκκινο
-TP_CHMIXER_BLUE;Μπλέ
-TP_CHMIXER_GREEN;Πράσινο
-TP_CHMIXER_LABEL;Μίξη καναλιών
-TP_CHMIXER_RED;Κόκκινο
-TP_COARSETRAF_TOOLTIP_HFLIP;Αναστροφή οριζόντια
-TP_COARSETRAF_TOOLTIP_ROTLEFT;Περιστροφή αριστερά
-TP_COARSETRAF_TOOLTIP_ROTRIGHT;Περιστροφή δεξιά
-TP_COARSETRAF_TOOLTIP_VFLIP;Αναστροφή κατακόρυφα
-TP_CROP_FIXRATIO;Κλείδωμα αναλογίας:
-TP_CROP_GTDIAGONALS;Κανόνας διαγωνίων
-TP_CROP_GTNONE;Κανένα
-TP_CROP_GTRULETHIRDS;Κανόνας τρίτων
-TP_CROP_GUIDETYPE;Είδος βοηθών:
-TP_CROP_H;H
-TP_CROP_LABEL;Αποκοπή
-TP_CROP_W;W
-TP_CROP_X;x
-TP_CROP_Y;y
-TP_DISTORTION_AMOUNT;Ένταση
-TP_DISTORTION_LABEL;Παραμόρφωση
-TP_EXPOSURE_AUTOLEVELS;Αυτόματα επίπεδα
-TP_EXPOSURE_BLACKLEVEL;Μαύρα
-TP_EXPOSURE_BRIGHTNESS;Φωτεινότητα
-TP_EXPOSURE_CLIP;Αποκοπή
-TP_EXPOSURE_COMPRHIGHLIGHTS;Συμπίεση φωτεινών σημείων
-TP_EXPOSURE_COMPRSHADOWS;Συμπίεση σκιών
-TP_EXPOSURE_CONTRAST;Αντίθεση
-TP_EXPOSURE_CURVEEDITOR;Καμπύλη τονικότητας
-TP_EXPOSURE_EXPCOMP;Επανόρθωση Έκθεσης
-TP_EXPOSURE_LABEL;Έκθεση
-TP_HLREC_CIELAB;Ανάμιξη CIELab
-TP_HLREC_COLOR;Διάδοση χρώματος
-TP_HLREC_LABEL;Ανάκτηση φωτεινών σημείων
-TP_HLREC_LUMINANCE;Ανάκτηση Φωτεινότητας
-TP_HLREC_METHOD;Μέθοδος:
-TP_ICM_INPUTCAMERA;Προεπιλογή φωτογραφικής μηχανής
-TP_ICM_INPUTCUSTOM;Προσαρμοσμένο
-TP_ICM_INPUTDLGLABEL;Επιλέξτε προφιλ ICC εισόδου...
-TP_ICM_INPUTEMBEDDED;Χρήση ενσωματωμένου, αν αυτό είναι δυνατό
-TP_ICM_INPUTPROFILE;Προφίλ εισαγωγής
-TP_ICM_LABEL;ICM
-TP_ICM_NOICM;No ICM: sRGB output
-TP_ICM_OUTPUTPROFILE;Προφίλ εξόδου
-TP_ICM_WORKINGPROFILE;Παρόν προφίλ
-TP_RAW_DMETHOD;Μέθοδος
-TP_RAW_FALSECOLOR;Βήματα καταστολής σφαλμένων χρωμάτων
-TP_RESIZE_H;H:
-TP_RESIZE_LABEL;Αλλαγή μεγέθους
-TP_RESIZE_METHOD;Μέθοδος:
-TP_RESIZE_NEAREST;Nearest
-TP_RESIZE_SCALE;Κλίμακα
-TP_RESIZE_W;W:
-TP_ROTATE_DEGREE;Γωνία
-TP_ROTATE_LABEL;Περιστροφή
-TP_ROTATE_SELECTLINE; Επιλογή ευθείας
-TP_SHADOWSHLIGHTS_HIGHLIGHTS;Φωτεινά σημεία
-TP_SHADOWSHLIGHTS_HLTONALW;Τονικό εύρος
-TP_SHADOWSHLIGHTS_LABEL;Σκιές/Φωτεινά σημεία
-TP_SHADOWSHLIGHTS_LOCALCONTR;Τοπική αντίθεση
-TP_SHADOWSHLIGHTS_RADIUS;Ακτίνα
-TP_SHADOWSHLIGHTS_SHADOWS;Σκιές
-TP_SHADOWSHLIGHTS_SHTONALW;Τονικό εύρος
-TP_SHARPENING_AMOUNT;Ένταση
-TP_SHARPENING_EDRADIUS;Ακτίνα
-TP_SHARPENING_EDTOLERANCE;Ανοχή ορίων
-TP_SHARPENING_HALOCONTROL;Έλεγχος άλως
-TP_SHARPENING_HCAMOUNT;Ένταση
-TP_SHARPENING_LABEL;Όξυνση
-TP_SHARPENING_METHOD;Μέθοδος
-TP_SHARPENING_ONLYEDGES;Όξυνση μόνο ορίων
-TP_SHARPENING_RADIUS;Ακτίνα
-TP_SHARPENING_RLD;RL Deconvolution
-TP_SHARPENING_RLD_AMOUNT;Ένταση
-TP_SHARPENING_RLD_DAMPING;Απόσβεση
-TP_SHARPENING_RLD_ITERATIONS;Επαναλήψεις
-TP_SHARPENING_THRESHOLD;Κατώφλι
-TP_SHARPENING_USM;Unsharp Mask
-TP_VIGNETTING_AMOUNT;Ένταση
-TP_VIGNETTING_LABEL;Διόρθωση vignetting
-TP_VIGNETTING_RADIUS;Ακτίνα
-TP_WBALANCE_AUTO;Αυτόματο
-TP_WBALANCE_CAMERA;Φωτογραφικής μηχανής
-TP_WBALANCE_CUSTOM;Προσαρμοσμένο
-TP_WBALANCE_GREEN;Απόχρωση
-TP_WBALANCE_LABEL;Εξισορρόπηση λευκού
-TP_WBALANCE_METHOD;Μέθοδος
-TP_WBALANCE_SIZE;Μέγεθος:
-TP_WBALANCE_SPOTWB;Εξ.Λ. σημείου
-TP_WBALANCE_TEMPERATURE;Θερμοκρασία
-
-!!!!!!!!!!!!!!!!!!!!!!!!!
-! Untranslated keys follow; remove the ! prefix after an entry is translated.
-!!!!!!!!!!!!!!!!!!!!!!!!!
-
-!ABOUT_TAB_BUILD;Version
-!ABOUT_TAB_CREDITS;Credits
-!ABOUT_TAB_LICENSE;License
-!ABOUT_TAB_RELEASENOTES;Release Notes
-!ABOUT_TAB_SPLASH;Splash
-!ADJUSTER_RESET_TO_DEFAULT;Click - reset to default value.\nCtrl+click - reset to initial value.
-!BATCHQUEUE_AUTOSTART;Auto-start
-!BATCHQUEUE_AUTOSTARTHINT;Start processing automatically when a new job arrives.
-!BATCHQUEUE_DESTFILENAME;Path and file name
-!BATCHQUEUE_STARTSTOPHINT;Start or stop processing the images in the queue.\n\nShortcut: Ctrl+s
-!BATCH_PROCESSING;Batch Processing
-!CURVEEDITOR_AXIS_IN;I:
-!CURVEEDITOR_AXIS_LEFT_TAN;LT:
-!CURVEEDITOR_AXIS_OUT;O:
-!CURVEEDITOR_AXIS_RIGHT_TAN;RT:
-!CURVEEDITOR_CATMULLROM;Flexible
-!CURVEEDITOR_CURVE;Curve
-!CURVEEDITOR_CURVES;Curves
-!CURVEEDITOR_CUSTOM;Standard
-!CURVEEDITOR_DARKS;Darks
-!CURVEEDITOR_EDITPOINT_HINT;Enable edition of node in/out values.\n\nRight-click on a node to select it.\nRight-click on empty space to de-select the node.
-!CURVEEDITOR_HIGHLIGHTS;Highlights
-!CURVEEDITOR_LIGHTS;Lights
-!CURVEEDITOR_MINMAXCPOINTS;Equalizer
-!CURVEEDITOR_NURBS;Control cage
-!CURVEEDITOR_PARAMETRIC;Parametric
-!CURVEEDITOR_SHADOWS;Shadows
-!CURVEEDITOR_TOOLTIPCOPY;Copy current curve to clipboard.
-!CURVEEDITOR_TOOLTIPPASTE;Paste curve from clipboard.
-!CURVEEDITOR_TYPE;Type:
-!DONT_SHOW_AGAIN;Don't show this message again.
-!DYNPROFILEEDITOR_DELETE;Delete
-!DYNPROFILEEDITOR_EDIT;Edit
-!DYNPROFILEEDITOR_EDIT_RULE;Edit Dynamic Profile Rule
-!DYNPROFILEEDITOR_ENTRY_TOOLTIP;The matching is case insensitive.\nUse the "re:" prefix to enter\na regular expression.
-!DYNPROFILEEDITOR_IMGTYPE_ANY;Any
-!DYNPROFILEEDITOR_IMGTYPE_HDR;HDR
-!DYNPROFILEEDITOR_IMGTYPE_PS;Pixel Shift
-!DYNPROFILEEDITOR_IMGTYPE_STD;Standard
-!DYNPROFILEEDITOR_MOVE_DOWN;Move Down
-!DYNPROFILEEDITOR_MOVE_UP;Move Up
-!DYNPROFILEEDITOR_NEW;New
-!DYNPROFILEEDITOR_NEW_RULE;New Dynamic Profile Rule
-!DYNPROFILEEDITOR_PROFILE;Processing Profile
-!EDITWINDOW_TITLE;Image Edit
-!EDIT_OBJECT_TOOLTIP;Displays a widget on the preview window which lets you adjust this tool.
-!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
-!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
-!EXIFFILTER_FILETYPE;File type
-!EXIFFILTER_IMAGETYPE;Image type
-!EXIFFILTER_METADATAFILTER;Enable metadata filters
-!EXIFPANEL_SHOWALL;Show all
-!EXPORT_BYPASS;Processing steps to bypass
-!EXPORT_BYPASS_ALL;Select / Unselect All
-!EXPORT_BYPASS_DEFRINGE;Bypass Defringe
-!EXPORT_BYPASS_DIRPYRDENOISE;Bypass Noise Reduction
-!EXPORT_BYPASS_DIRPYREQUALIZER;Bypass Contrast by Detail Levels
-!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
-!EXPORT_BYPASS_RAW_CA;Bypass [raw] Chromatic Aberration Correction
-!EXPORT_BYPASS_RAW_CCSTEPS;Bypass [raw] False Color Suppression
-!EXPORT_BYPASS_RAW_DCB_ENHANCE;Bypass [raw] DCB Enhancement Steps
-!EXPORT_BYPASS_RAW_DCB_ITERATIONS;Bypass [raw] DCB Iterations
-!EXPORT_BYPASS_RAW_DF;Bypass [raw] Dark-Frame
-!EXPORT_BYPASS_RAW_FF;Bypass [raw] Flat-Field
-!EXPORT_BYPASS_RAW_GREENTHRESH;Bypass [raw] Green Equilibration
-!EXPORT_BYPASS_RAW_LINENOISE;Bypass [raw] Line Noise Filter
-!EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Bypass [raw] LMMSE Enhancement Steps
-!EXPORT_BYPASS_SHARPENEDGE;Bypass Edge Sharpening
-!EXPORT_BYPASS_SHARPENING;Bypass Sharpening
-!EXPORT_BYPASS_SHARPENMICRO;Bypass Microcontrast
-!EXPORT_BYPASS_SH_HQ;Bypass Sharp Mask Shadows/Highlights
-!EXPORT_FASTEXPORTOPTIONS;Fast Export Options
-!EXPORT_INSTRUCTIONS;Fast Export options provide overrides to bypass time and resource consuming development settings and to run queue processing using the fast export settings instead. This method is recommended for quicker generation of lower resolution images when speed is a priority or when resized output is desired for one or many images without making modifications to their saved development parameters.
-!EXPORT_MAXHEIGHT;Maximum height:
-!EXPORT_MAXWIDTH;Maximum width:
-!EXPORT_PIPELINE;Processing pipeline
-!EXPORT_PUTTOQUEUEFAST; Put to queue for fast export
-!EXPORT_RAW_DMETHOD;Demosaic method
-!EXPORT_USE_FAST_PIPELINE;Dedicated (full processing on resized image)
-!EXPORT_USE_FAST_PIPELINE_TIP;Use a dedicated processing pipeline for images in Fast Export mode, that trades speed for quality. Resizing of the image is done as early as possible, instead of doing it at the end like in the normal pipeline. The speedup can be significant, but be prepared to see artifacts and a general degradation of output quality.
-!EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
-!EXTPROGTARGET_1;raw
-!EXTPROGTARGET_2;queue-processed
-!FILEBROWSER_ADDDELTEMPLATE;Add/Del templates...
-!FILEBROWSER_APPLYPROFILE_PARTIAL;Apply - partial
-!FILEBROWSER_AUTODARKFRAME;Auto dark-frame
-!FILEBROWSER_AUTOFLATFIELD;Auto flat-field
-!FILEBROWSER_BROWSEPATHBUTTONHINT;Click to open specified path, reload folder and apply "find" keywords.
-!FILEBROWSER_BROWSEPATHHINT;Type a path to navigate to.\n\nKeyboard shortcuts:\nCtrl-o to focus to the path text box.\nEnter / Ctrl-Enter to browse there;\nEsc to clear changes.\nShift-Esc to remove focus.\n\nPath shortcuts:\n~ - user's home directory.\n! - user's pictures directory
-!FILEBROWSER_CACHE;Cache
-!FILEBROWSER_CACHECLEARFROMFULL;Clear all including cached profiles
-!FILEBROWSER_CACHECLEARFROMPARTIAL;Clear all except cached profiles
-!FILEBROWSER_COLORLABEL_TOOLTIP;Color label.\n\nUse dropdown menu or shortcuts:\nShift-Ctrl-0 No Color\nShift-Ctrl-1 Red\nShift-Ctrl-2 Yellow\nShift-Ctrl-3 Green\nShift-Ctrl-4 Blue\nShift-Ctrl-5 Purple
-!FILEBROWSER_CURRENT_NAME;Current name:
-!FILEBROWSER_DARKFRAME;Dark-frame
-!FILEBROWSER_DELETEDLGMSGINCLPROC;Are you sure you want to delete the selected %1 files including a queue-processed version?
-!FILEBROWSER_EXTPROGMENU;Open with
-!FILEBROWSER_FLATFIELD;Flat-Field
-!FILEBROWSER_MOVETODARKFDIR;Move to dark-frames directory
-!FILEBROWSER_MOVETOFLATFIELDDIR;Move to flat-fields directory
-!FILEBROWSER_NEW_NAME;New name:
-!FILEBROWSER_OPENDEFAULTVIEWER;Windows default viewer (queue-processed)
-!FILEBROWSER_POPUPCOLORLABEL;Color label
-!FILEBROWSER_POPUPCOLORLABEL0;Label: None
-!FILEBROWSER_POPUPCOLORLABEL1;Label: Red
-!FILEBROWSER_POPUPCOLORLABEL2;Label: Yellow
-!FILEBROWSER_POPUPCOLORLABEL3;Label: Green
-!FILEBROWSER_POPUPCOLORLABEL4;Label: Blue
-!FILEBROWSER_POPUPCOLORLABEL5;Label: Purple
-!FILEBROWSER_POPUPCOPYTO;Copy to...
-!FILEBROWSER_POPUPFILEOPERATIONS;File operations
-!FILEBROWSER_POPUPMOVETO;Move to...
-!FILEBROWSER_POPUPPROCESSFAST;Put to queue (Fast export)
-!FILEBROWSER_POPUPPROFILEOPERATIONS;Processing profile operations
-!FILEBROWSER_POPUPRANK;Rank
-!FILEBROWSER_POPUPRANK0;Unrank
-!FILEBROWSER_POPUPRANK1;Rank 1 *
-!FILEBROWSER_POPUPRANK2;Rank 2 **
-!FILEBROWSER_POPUPRANK3;Rank 3 ***
-!FILEBROWSER_POPUPRANK4;Rank 4 ****
-!FILEBROWSER_POPUPRANK5;Rank 5 *****
-!FILEBROWSER_POPUPREMOVEINCLPROC;Delete with output from queue
-!FILEBROWSER_QUERYBUTTONHINT;Clear the Find query
-!FILEBROWSER_QUERYHINT;Type filenames to search for. Supports partial filenames. Separate the search terms using commas, e.g.\n1001,1004,1199\n\nExclude search terms by prefixing them with !=\ne.g.\n!=1001,1004,1199\n\nShortcuts:\nCtrl-f - focus the Find box,\nEnter - search,\nEsc - clear the Find box,\nShift-Esc - defocus the Find box.
-!FILEBROWSER_QUERYLABEL; Find:
-!FILEBROWSER_RANK1_TOOLTIP;Rank 1 *\nShortcut: Shift-1
-!FILEBROWSER_RANK2_TOOLTIP;Rank 2 *\nShortcut: Shift-2
-!FILEBROWSER_RANK3_TOOLTIP;Rank 3 *\nShortcut: Shift-3
-!FILEBROWSER_RANK4_TOOLTIP;Rank 4 *\nShortcut: Shift-4
-!FILEBROWSER_RANK5_TOOLTIP;Rank 5 *\nShortcut: Shift-5
-!FILEBROWSER_RESETDEFAULTPROFILE;Reset to default
-!FILEBROWSER_SELECTDARKFRAME;Select dark-frame...
-!FILEBROWSER_SELECTFLATFIELD;Select flat-field...
-!FILEBROWSER_SHOWCOLORLABEL1HINT;Show images labeled Red.\nShortcut: Alt-1
-!FILEBROWSER_SHOWCOLORLABEL2HINT;Show images labeled Yellow.\nShortcut: Alt-2
-!FILEBROWSER_SHOWCOLORLABEL3HINT;Show images labeled Green.\nShortcut: Alt-3
-!FILEBROWSER_SHOWCOLORLABEL4HINT;Show images labeled Blue.\nShortcut: Alt-4
-!FILEBROWSER_SHOWCOLORLABEL5HINT;Show images labeled Purple.\nShortcut: Alt-5
-!FILEBROWSER_SHOWEDITEDHINT;Show edited images.\nShortcut: 7
-!FILEBROWSER_SHOWEDITEDNOTHINT;Show not edited images.\nShortcut: 6
-!FILEBROWSER_SHOWEXIFINFO;Show Exif info.\n\nShortcuts:\ni - Multiple Editor Tabs Mode,\nAlt-i - Single Editor Tab Mode.
-!FILEBROWSER_SHOWNOTTRASHHINT;Show only non-deleted images.
-!FILEBROWSER_SHOWORIGINALHINT;Show only original images.\n\nWhen several images exist with the same filename but different extensions, the one considered original is the one whose extension is nearest the top of the parsed extensions list in Preferences > File Browser > Parsed Extensions.
-!FILEBROWSER_SHOWRECENTLYSAVEDHINT;Show saved images.\nShortcut: Alt-7
-!FILEBROWSER_SHOWRECENTLYSAVEDNOTHINT;Show unsaved images.\nShortcut: Alt-6
-!FILEBROWSER_SHOWUNCOLORHINT;Show images without a color label.\nShortcut: Alt-0
-!FILEBROWSER_UNRANK_TOOLTIP;Unrank.\nShortcut: Shift-0
-!FILECHOOSER_FILTER_ANY;All files
-!FILECHOOSER_FILTER_COLPROF;Color profiles (*.icc)
-!FILECHOOSER_FILTER_CURVE;Curve files
-!FILECHOOSER_FILTER_LCP;Lens correction profiles
-!FILECHOOSER_FILTER_PP;Processing profiles
-!FILECHOOSER_FILTER_SAME;Same format as current photo
-!FILECHOOSER_FILTER_TIFF;TIFF files
-!GENERAL_AFTER;After
-!GENERAL_APPLY;Apply
-!GENERAL_ASIMAGE;As Image
-!GENERAL_AUTO;Automatic
-!GENERAL_BEFORE;Before
-!GENERAL_CLOSE;Close
-!GENERAL_CURRENT;Current
-!GENERAL_FILE;File
-!GENERAL_NONE;None
-!GENERAL_OPEN;Open
-!GENERAL_RESET;Reset
-!GENERAL_SAVE_AS;Save as...
-!GENERAL_SLIDER;Slider
-!GENERAL_UNCHANGED;(Unchanged)
-!GENERAL_WARNING;Warning
-!GIMP_PLUGIN_INFO;Welcome to the RawTherapee GIMP plugin!\nOnce you are done editing, simply close the main RawTherapee window and the image will be automatically imported in GIMP.
-!HISTOGRAM_TOOLTIP_BAR;Show/Hide RGB indicator bar.
-!HISTOGRAM_TOOLTIP_CHRO;Show/Hide chromaticity histogram.
-!HISTOGRAM_TOOLTIP_MODE;Toggle between linear, log-linear and log-log scaling of the histogram.
-!HISTOGRAM_TOOLTIP_RAW;Show/Hide raw histogram.
-!HISTORY_MSG_82;Profile changed
-!HISTORY_MSG_83;S/H - Sharp mask
-!HISTORY_MSG_84;Perspective correction
-!HISTORY_MSG_85;Lens Correction - LCP file
-!HISTORY_MSG_86;RGB Curves - Luminosity mode
-!HISTORY_MSG_87;Impulse Noise Reduction
-!HISTORY_MSG_88;Impulse NR threshold
-!HISTORY_MSG_89;Noise Reduction
-!HISTORY_MSG_90;NR - Luminance
-!HISTORY_MSG_91;NR - Chrominance master
-!HISTORY_MSG_92;NR - Gamma
-!HISTORY_MSG_93;CbDL - Value
-!HISTORY_MSG_94;Contrast by Detail Levels
-!HISTORY_MSG_95;L*a*b* - Chromaticity
-!HISTORY_MSG_96;L*a*b* - a* curve
-!HISTORY_MSG_97;L*a*b* - b* curve
-!HISTORY_MSG_98;Demosaicing method
-!HISTORY_MSG_99;Hot pixel filter
-!HISTORY_MSG_100;Exposure - Saturation
-!HISTORY_MSG_101;HSV - Hue
-!HISTORY_MSG_102;HSV - Saturation
-!HISTORY_MSG_103;HSV - Value
-!HISTORY_MSG_104;HSV Equalizer
-!HISTORY_MSG_105;Defringe
-!HISTORY_MSG_106;Defringe - Radius
-!HISTORY_MSG_107;Defringe - Threshold
-!HISTORY_MSG_108;Exposure - HLC threshold
-!HISTORY_MSG_109;Resize - Bounding box
-!HISTORY_MSG_110;Resize - Applies to
-!HISTORY_MSG_111;L*a*b* - Avoid color shift
-!HISTORY_MSG_112;--unused--
-!HISTORY_MSG_113;L*a*b* - Red/skin prot.
-!HISTORY_MSG_114;DCB iterations
-!HISTORY_MSG_115;False color suppression
-!HISTORY_MSG_116;DCB enhancement
-!HISTORY_MSG_117;Raw CA correction - Red
-!HISTORY_MSG_118;Raw CA correction - Blue
-!HISTORY_MSG_119;Line noise filter
-!HISTORY_MSG_120;Green equilibration
-!HISTORY_MSG_121;Raw CA Correction - Auto
-!HISTORY_MSG_122;Dark-Frame - Auto-selection
-!HISTORY_MSG_123;Dark-Frame - File
-!HISTORY_MSG_124;White point correction
-!HISTORY_MSG_126;Flat-Field - File
-!HISTORY_MSG_127;Flat-Field - Auto-selection
-!HISTORY_MSG_128;Flat-Field - Blur radius
-!HISTORY_MSG_129;Flat-Field - Blur type
-!HISTORY_MSG_130;Auto distortion correction
-!HISTORY_MSG_131;NR - Luma
-!HISTORY_MSG_132;NR - Chroma
-!HISTORY_MSG_133;Output gamma
-!HISTORY_MSG_134;Free gamma
-!HISTORY_MSG_135;Free gamma
-!HISTORY_MSG_136;Free gamma slope
-!HISTORY_MSG_137;Black level - Green 1
-!HISTORY_MSG_138;Black level - Red
-!HISTORY_MSG_139;Black level - Blue
-!HISTORY_MSG_140;Black level - Green 2
-!HISTORY_MSG_141;Black level - Link greens
-!HISTORY_MSG_142;ES - Iterations
-!HISTORY_MSG_143;ES - Quantity
-!HISTORY_MSG_144;Microcontrast - Quantity
-!HISTORY_MSG_145;Microcontrast - Uniformity
-!HISTORY_MSG_146;Edge sharpening
-!HISTORY_MSG_147;ES - Luminance only
-!HISTORY_MSG_148;Microcontrast
-!HISTORY_MSG_149;Microcontrast - 3×3 matrix
-!HISTORY_MSG_150;Post-demosaic artifact/noise red.
-!HISTORY_MSG_151;Vibrance
-!HISTORY_MSG_152;Vib - Pastel tones
-!HISTORY_MSG_153;Vib - Saturated tones
-!HISTORY_MSG_154;Vib - Protect skin-tones
-!HISTORY_MSG_155;Vib - Avoid color shift
-!HISTORY_MSG_156;Vib - Link pastel/saturated
-!HISTORY_MSG_157;Vib - P/S threshold
-!HISTORY_MSG_158;TM - Strength
-!HISTORY_MSG_159;TM - Edge stopping
-!HISTORY_MSG_160;TM - Scale
-!HISTORY_MSG_161;TM - Reweighting iterates
-!HISTORY_MSG_162;Tone Mapping
-!HISTORY_MSG_163;RGB Curves - Red
-!HISTORY_MSG_164;RGB Curves - Green
-!HISTORY_MSG_165;RGB Curves - Blue
-!HISTORY_MSG_166;Exposure - Reset
-!HISTORY_MSG_167;Demosaicing method
-!HISTORY_MSG_168;L*a*b* - CC curve
-!HISTORY_MSG_169;L*a*b* - CH curve
-!HISTORY_MSG_170;Vibrance - HH curve
-!HISTORY_MSG_171;L*a*b* - LC curve
-!HISTORY_MSG_172;L*a*b* - Restrict LC
-!HISTORY_MSG_173;NR - Detail recovery
-!HISTORY_MSG_174;CIECAM02
-!HISTORY_MSG_175;CAM02 - CAT02 adaptation
-!HISTORY_MSG_176;CAM02 - Viewing surround
-!HISTORY_MSG_177;CAM02 - Scene luminosity
-!HISTORY_MSG_178;CAM02 - Viewing luminosity
-!HISTORY_MSG_179;CAM02 - White-point model
-!HISTORY_MSG_180;CAM02 - Lightness (J)
-!HISTORY_MSG_181;CAM02 - Chroma (C)
-!HISTORY_MSG_182;CAM02 - Automatic CAT02
-!HISTORY_MSG_183;CAM02 - Contrast (J)
-!HISTORY_MSG_184;CAM02 - Scene surround
-!HISTORY_MSG_185;CAM02 - Gamut control
-!HISTORY_MSG_186;CAM02 - Algorithm
-!HISTORY_MSG_187;CAM02 - Red/skin prot.
-!HISTORY_MSG_188;CAM02 - Brightness (Q)
-!HISTORY_MSG_189;CAM02 - Contrast (Q)
-!HISTORY_MSG_190;CAM02 - Saturation (S)
-!HISTORY_MSG_191;CAM02 - Colorfulness (M)
-!HISTORY_MSG_192;CAM02 - Hue (h)
-!HISTORY_MSG_193;CAM02 - Tone curve 1
-!HISTORY_MSG_194;CAM02 - Tone curve 2
-!HISTORY_MSG_195;CAM02 - Tone curve 1
-!HISTORY_MSG_196;CAM02 - Tone curve 2
-!HISTORY_MSG_197;CAM02 - Color curve
-!HISTORY_MSG_198;CAM02 - Color curve
-!HISTORY_MSG_199;CAM02 - Output histograms
-!HISTORY_MSG_200;CAM02 - Tone mapping
-!HISTORY_MSG_201;NR - Chrominance - R&G
-!HISTORY_MSG_202;NR - Chrominance - B&Y
-!HISTORY_MSG_203;NR - Color space
-!HISTORY_MSG_204;LMMSE enhancement steps
-!HISTORY_MSG_205;CAM02 - Hot/bad pixel filter
-!HISTORY_MSG_206;CAT02 - Auto scene luminosity
-!HISTORY_MSG_207;Defringe - Hue curve
-!HISTORY_MSG_208;WB - B/R equalizer
-!HISTORY_MSG_210;GF - Angle
-!HISTORY_MSG_211;Graduated Filter
-!HISTORY_MSG_212;VF - Strength
-!HISTORY_MSG_213;Vignette Filter
-!HISTORY_MSG_214;Black-and-White
-!HISTORY_MSG_215;B&W - CM - Red
-!HISTORY_MSG_216;B&W - CM - Green
-!HISTORY_MSG_217;B&W - CM - Blue
-!HISTORY_MSG_218;B&W - Gamma - Red
-!HISTORY_MSG_219;B&W - Gamma - Green
-!HISTORY_MSG_220;B&W - Gamma - Blue
-!HISTORY_MSG_221;B&W - Color filter
-!HISTORY_MSG_222;B&W - Presets
-!HISTORY_MSG_223;B&W - CM - Orange
-!HISTORY_MSG_224;B&W - CM - Yellow
-!HISTORY_MSG_225;B&W - CM - Cyan
-!HISTORY_MSG_226;B&W - CM - Magenta
-!HISTORY_MSG_227;B&W - CM - Purple
-!HISTORY_MSG_228;B&W - Luminance equalizer
-!HISTORY_MSG_229;B&W - Luminance equalizer
-!HISTORY_MSG_230;B&W - Mode
-!HISTORY_MSG_231;B&W - 'Before' curve
-!HISTORY_MSG_232;B&W - 'Before' curve type
-!HISTORY_MSG_233;B&W - 'After' curve
-!HISTORY_MSG_234;B&W - 'After' curve type
-!HISTORY_MSG_235;B&W - CM - Auto
-!HISTORY_MSG_236;--unused--
-!HISTORY_MSG_237;B&W - CM
-!HISTORY_MSG_238;GF - Feather
-!HISTORY_MSG_239;GF - Strength
-!HISTORY_MSG_240;GF - Center
-!HISTORY_MSG_241;VF - Feather
-!HISTORY_MSG_242;VF - Roundness
-!HISTORY_MSG_243;VC - Radius
-!HISTORY_MSG_244;VC - Strength
-!HISTORY_MSG_245;VC - Center
-!HISTORY_MSG_246;L*a*b* - CL curve
-!HISTORY_MSG_247;L*a*b* - LH curve
-!HISTORY_MSG_248;L*a*b* - HH curve
-!HISTORY_MSG_249;CbDL - Threshold
-!HISTORY_MSG_250;NR - Enhanced
-!HISTORY_MSG_251;B&W - Algorithm
-!HISTORY_MSG_252;CbDL - Skin tar/prot
-!HISTORY_MSG_253;CbDL - Reduce artifacts
-!HISTORY_MSG_254;CbDL - Skin hue
-!HISTORY_MSG_255;NR - Median filter
-!HISTORY_MSG_256;NR - Median - Type
-!HISTORY_MSG_257;Color Toning
-!HISTORY_MSG_258;CT - Color curve
-!HISTORY_MSG_259;CT - Opacity curve
-!HISTORY_MSG_260;CT - a*[b*] opacity
-!HISTORY_MSG_261;CT - Method
-!HISTORY_MSG_262;CT - b* opacity
-!HISTORY_MSG_263;CT - Shadows - Red
-!HISTORY_MSG_264;CT - Shadows - Green
-!HISTORY_MSG_265;CT - Shadows - Blue
-!HISTORY_MSG_266;CT - Mid - Red
-!HISTORY_MSG_267;CT - Mid - Green
-!HISTORY_MSG_268;CT - Mid - Blue
-!HISTORY_MSG_269;CT - High - Red
-!HISTORY_MSG_270;CT - High - Green
-!HISTORY_MSG_271;CT - High - Blue
-!HISTORY_MSG_272;CT - Balance
-!HISTORY_MSG_273;CT - Color Balance SMH
-!HISTORY_MSG_274;CT - Sat. Shadows
-!HISTORY_MSG_275;CT - Sat. Highlights
-!HISTORY_MSG_276;CT - Opacity
-!HISTORY_MSG_277;--unused--
-!HISTORY_MSG_278;CT - Preserve luminance
-!HISTORY_MSG_279;CT - Shadows
-!HISTORY_MSG_280;CT - Highlights
-!HISTORY_MSG_281;CT - Sat. strength
-!HISTORY_MSG_282;CT - Sat. threshold
-!HISTORY_MSG_283;CT - Strength
-!HISTORY_MSG_284;CT - Auto sat. protection
-!HISTORY_MSG_285;NR - Median - Method
-!HISTORY_MSG_286;NR - Median - Type
-!HISTORY_MSG_287;NR - Median - Iterations
-!HISTORY_MSG_288;Flat-Field - Clip control
-!HISTORY_MSG_289;Flat-Field - Clip control - Auto
-!HISTORY_MSG_290;Black Level - Red
-!HISTORY_MSG_291;Black Level - Green
-!HISTORY_MSG_292;Black Level - Blue
-!HISTORY_MSG_293;Film Simulation
-!HISTORY_MSG_294;Film Simulation - Strength
-!HISTORY_MSG_295;Film Simulation - Film
-!HISTORY_MSG_296;NR - Luminance curve
-!HISTORY_MSG_297;NR - Mode
-!HISTORY_MSG_298;Dead pixel filter
-!HISTORY_MSG_299;NR - Chrominance curve
-!HISTORY_MSG_300;-
-!HISTORY_MSG_301;NR - Luma control
-!HISTORY_MSG_302;NR - Chroma method
-!HISTORY_MSG_303;NR - Chroma method
-!HISTORY_MSG_304;W - Contrast levels
-!HISTORY_MSG_305;Wavelet Levels
-!HISTORY_MSG_306;W - Process
-!HISTORY_MSG_307;W - Process
-!HISTORY_MSG_308;W - Process direction
-!HISTORY_MSG_309;W - ES - Detail
-!HISTORY_MSG_310;W - Residual - Sky tar/prot
-!HISTORY_MSG_311;W - Wavelet levels
-!HISTORY_MSG_312;W - Residual - Shadows threshold
-!HISTORY_MSG_313;W - Chroma - Sat/past
-!HISTORY_MSG_314;W - Gamut - Reduce artifacts
-!HISTORY_MSG_315;W - Residual - Contrast
-!HISTORY_MSG_316;W - Gamut - Skin tar/prot
-!HISTORY_MSG_317;W - Gamut - Skin hue
-!HISTORY_MSG_318;W - Contrast - Highlight levels
-!HISTORY_MSG_319;W - Contrast - Highlight range
-!HISTORY_MSG_320;W - Contrast - Shadow range
-!HISTORY_MSG_321;W - Contrast - Shadow levels
-!HISTORY_MSG_322;W - Gamut - Avoid color shift
-!HISTORY_MSG_323;W - ES - Local contrast
-!HISTORY_MSG_324;W - Chroma - Pastel
-!HISTORY_MSG_325;W - Chroma - Saturated
-!HISTORY_MSG_326;W - Chroma - Method
-!HISTORY_MSG_327;W - Contrast - Apply to
-!HISTORY_MSG_328;W - Chroma - Link strength
-!HISTORY_MSG_329;W - Toning - Opacity RG
-!HISTORY_MSG_330;W - Toning - Opacity BY
-!HISTORY_MSG_331;W - Contrast levels - Extra
-!HISTORY_MSG_332;W - Tiling method
-!HISTORY_MSG_333;W - Residual - Shadows
-!HISTORY_MSG_334;W - Residual - Chroma
-!HISTORY_MSG_335;W - Residual - Highlights
-!HISTORY_MSG_336;W - Residual - Highlights threshold
-!HISTORY_MSG_337;W - Residual - Sky hue
-!HISTORY_MSG_338;W - ES - Radius
-!HISTORY_MSG_339;W - ES - Strength
-!HISTORY_MSG_340;W - Strength
-!HISTORY_MSG_341;W - Edge performance
-!HISTORY_MSG_342;W - ES - First level
-!HISTORY_MSG_343;W - Chroma levels
-!HISTORY_MSG_344;W - Meth chroma sl/cur
-!HISTORY_MSG_345;W - ES - Local contrast
-!HISTORY_MSG_346;W - ES - Local contrast method
-!HISTORY_MSG_347;W - Denoise - Level 1
-!HISTORY_MSG_348;W - Denoise - Level 2
-!HISTORY_MSG_349;W - Denoise - Level 3
-!HISTORY_MSG_350;W - ES - Edge detection
-!HISTORY_MSG_351;W - Residual - HH curve
-!HISTORY_MSG_352;W - Background
-!HISTORY_MSG_353;W - ES - Gradient sensitivity
-!HISTORY_MSG_354;W - ES - Enhanced
-!HISTORY_MSG_355;W - ES - Threshold low
-!HISTORY_MSG_356;W - ES - Threshold high
-!HISTORY_MSG_357;W - Denoise - Link with ES
-!HISTORY_MSG_358;W - Gamut - CH
-!HISTORY_MSG_359;Hot/Dead - Threshold
-!HISTORY_MSG_360;TM - Gamma
-!HISTORY_MSG_361;W - Final - Chroma balance
-!HISTORY_MSG_362;W - Residual - Compression method
-!HISTORY_MSG_363;W - Residual - Compression strength
-!HISTORY_MSG_364;W - Final - Contrast balance
-!HISTORY_MSG_365;W - Final - Delta balance
-!HISTORY_MSG_366;W - Residual - Compression gamma
-!HISTORY_MSG_367;W - Final - 'After' contrast curve
-!HISTORY_MSG_368;W - Final - Contrast balance
-!HISTORY_MSG_369;W - Final - Balance method
-!HISTORY_MSG_370;W - Final - Local contrast curve
-!HISTORY_MSG_371;Post-Resize Sharpening
-!HISTORY_MSG_372;PRS USM - Radius
-!HISTORY_MSG_373;PRS USM - Amount
-!HISTORY_MSG_374;PRS USM - Threshold
-!HISTORY_MSG_375;PRS USM - Sharpen only edges
-!HISTORY_MSG_376;PRS USM - Edge detection radius
-!HISTORY_MSG_377;PRS USM - Edge tolerance
-!HISTORY_MSG_378;PRS USM - Halo control
-!HISTORY_MSG_379;PRS USM - Halo control amount
-!HISTORY_MSG_380;PRS - Method
-!HISTORY_MSG_381;PRS RLD - Radius
-!HISTORY_MSG_382;PRS RLD - Amount
-!HISTORY_MSG_383;PRS RLD - Damping
-!HISTORY_MSG_384;PRS RLD - Iterations
-!HISTORY_MSG_385;W - Residual - Color Balance
-!HISTORY_MSG_386;W - Residual - CB green high
-!HISTORY_MSG_387;W - Residual - CB blue high
-!HISTORY_MSG_388;W - Residual - CB green mid
-!HISTORY_MSG_389;W - Residual - CB blue mid
-!HISTORY_MSG_390;W - Residual - CB green low
-!HISTORY_MSG_391;W - Residual - CB blue low
-!HISTORY_MSG_392;W - Residual - Color Balance
-!HISTORY_MSG_393;DCP - Look table
-!HISTORY_MSG_394;DCP - Baseline exposure
-!HISTORY_MSG_395;DCP - Base table
-!HISTORY_MSG_396;W - Contrast sub-tool
-!HISTORY_MSG_397;W - Chroma sub-tool
-!HISTORY_MSG_398;W - ES sub-tool
-!HISTORY_MSG_399;W - Residual sub-tool
-!HISTORY_MSG_400;W - Final sub-tool
-!HISTORY_MSG_401;W - Toning sub-tool
-!HISTORY_MSG_402;W - Denoise sub-tool
-!HISTORY_MSG_403;W - ES - Edge sensitivity
-!HISTORY_MSG_404;W - ES - Base amplification
-!HISTORY_MSG_405;W - Denoise - Level 4
-!HISTORY_MSG_406;W - ES - Neighboring pixels
-!HISTORY_MSG_407;Retinex - Method
-!HISTORY_MSG_408;Retinex - Radius
-!HISTORY_MSG_409;Retinex - Contrast
-!HISTORY_MSG_410;Retinex - Offset
-!HISTORY_MSG_411;Retinex - Strength
-!HISTORY_MSG_412;Retinex - Gaussian gradient
-!HISTORY_MSG_413;Retinex - Contrast
-!HISTORY_MSG_414;Retinex - Histogram - Lab
-!HISTORY_MSG_415;Retinex - Transmission
-!HISTORY_MSG_416;Retinex
-!HISTORY_MSG_417;Retinex - Transmission median
-!HISTORY_MSG_418;Retinex - Threshold
-!HISTORY_MSG_419;Retinex - Color space
-!HISTORY_MSG_420;Retinex - Histogram - HSL
-!HISTORY_MSG_421;Retinex - Gamma
-!HISTORY_MSG_422;Retinex - Gamma
-!HISTORY_MSG_423;Retinex - Gamma slope
-!HISTORY_MSG_424;Retinex - HL threshold
-!HISTORY_MSG_425;Retinex - Log base
-!HISTORY_MSG_426;Retinex - Hue equalizer
-!HISTORY_MSG_427;Output rendering intent
-!HISTORY_MSG_428;Monitor rendering intent
-!HISTORY_MSG_429;Retinex - Iterations
-!HISTORY_MSG_430;Retinex - Transmission gradient
-!HISTORY_MSG_431;Retinex - Strength gradient
-!HISTORY_MSG_432;Retinex - M - Highlights
-!HISTORY_MSG_433;Retinex - M - Highlights TW
-!HISTORY_MSG_434;Retinex - M - Shadows
-!HISTORY_MSG_435;Retinex - M - Shadows TW
-!HISTORY_MSG_436;Retinex - M - Radius
-!HISTORY_MSG_437;Retinex - M - Method
-!HISTORY_MSG_438;Retinex - M - Equalizer
-!HISTORY_MSG_439;Retinex - Process
-!HISTORY_MSG_440;CbDL - Method
-!HISTORY_MSG_441;Retinex - Gain transmission
-!HISTORY_MSG_442;Retinex - Scale
-!HISTORY_MSG_443;Output black point compensation
-!HISTORY_MSG_444;WB - Temp bias
-!HISTORY_MSG_445;Raw sub-image
-!HISTORY_MSG_449;PS - ISO adaption
-!HISTORY_MSG_452;PS - Show motion
-!HISTORY_MSG_453;PS - Show mask only
-!HISTORY_MSG_457;PS - Check red/blue
-!HISTORY_MSG_462;PS - Check green
-!HISTORY_MSG_464;PS - Blur motion mask
-!HISTORY_MSG_465;PS - Blur radius
-!HISTORY_MSG_468;PS - Fill holes
-!HISTORY_MSG_469;PS - Median
-!HISTORY_MSG_471;PS - Motion correction
-!HISTORY_MSG_472;PS - Smooth transitions
-!HISTORY_MSG_473;PS - Use LMMSE
-!HISTORY_MSG_474;PS - Equalize
-!HISTORY_MSG_475;PS - Equalize channel
-!HISTORY_MSG_476;CAM02 - Temp out
-!HISTORY_MSG_477;CAM02 - Green out
-!HISTORY_MSG_478;CAM02 - Yb out
-!HISTORY_MSG_479;CAM02 - CAT02 adaptation out
-!HISTORY_MSG_480;CAM02 - Automatic CAT02 out
-!HISTORY_MSG_481;CAM02 - Temp scene
-!HISTORY_MSG_482;CAM02 - Green scene
-!HISTORY_MSG_483;CAM02 - Yb scene
-!HISTORY_MSG_484;CAM02 - Auto Yb scene
-!HISTORY_MSG_485;Lens Correction
-!HISTORY_MSG_486;Lens Correction - Camera
-!HISTORY_MSG_487;Lens Correction - Lens
-!HISTORY_MSG_488;Dynamic Range Compression
-!HISTORY_MSG_489;DRC - Detail
-!HISTORY_MSG_490;DRC - Amount
-!HISTORY_MSG_491;White Balance
-!HISTORY_MSG_492;RGB Curves
-!HISTORY_MSG_493;L*a*b* Adjustments
-!HISTORY_MSG_CLAMPOOG;Clip out-of-gamut colors
-!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_AB;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_CHANNEL;CT - Channel
-!HISTORY_MSG_COLORTONING_LABREGION_CHROMATICITYMASK;CT - region C mask
-!HISTORY_MSG_COLORTONING_LABREGION_HUEMASK;CT - H mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESS;CT - Lightness
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESSMASK;CT - L mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIST;CT - List
-!HISTORY_MSG_COLORTONING_LABREGION_MASKBLUR;CT - region mask blur
-!HISTORY_MSG_COLORTONING_LABREGION_OFFSET;CT - region offset
-!HISTORY_MSG_COLORTONING_LABREGION_POWER;CT - region power
-!HISTORY_MSG_COLORTONING_LABREGION_SATURATION;CT - Saturation
-!HISTORY_MSG_COLORTONING_LABREGION_SHOWMASK;CT - region show mask
-!HISTORY_MSG_COLORTONING_LABREGION_SLOPE;CT - region slope
-!HISTORY_MSG_DEHAZE_DEPTH;Dehaze - Depth
-!HISTORY_MSG_DEHAZE_ENABLED;Haze Removal
-!HISTORY_MSG_DEHAZE_SHOW_DEPTH_MAP;Dehaze - Show depth map
-!HISTORY_MSG_DEHAZE_STRENGTH;Dehaze - Strength
-!HISTORY_MSG_DUALDEMOSAIC_AUTO_CONTRAST;Dual demosaic - Auto threshold
-!HISTORY_MSG_DUALDEMOSAIC_CONTRAST;Dual demosaic - Contrast threshold
-!HISTORY_MSG_HISTMATCHING;Auto-matched tone curve
-!HISTORY_MSG_ICM_OUTPUT_PRIMARIES;Output - Primaries
-!HISTORY_MSG_ICM_OUTPUT_TEMP;Output - ICC-v4 illuminant D
-!HISTORY_MSG_ICM_OUTPUT_TYPE;Output - Type
-!HISTORY_MSG_ICM_WORKING_GAMMA;Working - Gamma
-!HISTORY_MSG_ICM_WORKING_SLOPE;Working - Slope
-!HISTORY_MSG_ICM_WORKING_TRC_METHOD;Working - TRC method
-!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
-!HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness
-!HISTORY_MSG_LOCALCONTRAST_ENABLED;Local Contrast
-!HISTORY_MSG_LOCALCONTRAST_LIGHTNESS;Local Contrast - Lightness
-!HISTORY_MSG_LOCALCONTRAST_RADIUS;Local Contrast - Radius
-!HISTORY_MSG_METADATA_MODE;Metadata copy mode
-!HISTORY_MSG_MICROCONTRAST_CONTRAST;Microcontrast - Contrast threshold
-!HISTORY_MSG_PIXELSHIFT_DEMOSAIC;PS - Demosaic method for motion
-!HISTORY_MSG_PREPROCESS_LINEDENOISE_DIRECTION;Line noise filter direction
-!HISTORY_MSG_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!HISTORY_MSG_PRSHARPEN_CONTRAST;PRS - Contrast threshold
-!HISTORY_MSG_RAWCACORR_AUTOIT;Raw CA Correction - Iterations
-!HISTORY_MSG_RAWCACORR_COLORSHIFT;Raw CA Correction - Avoid color shift
-!HISTORY_MSG_RAW_BORDER;Raw border
-!HISTORY_MSG_RESIZE_ALLOWUPSCALING;Resize - Allow upscaling
-!HISTORY_MSG_SHARPENING_BLUR;Sharpening - Blur radius
-!HISTORY_MSG_SHARPENING_CONTRAST;Sharpening - Contrast threshold
-!HISTORY_MSG_SH_COLORSPACE;S/H - Colorspace
-!HISTORY_MSG_SOFTLIGHT_ENABLED;Soft light
-!HISTORY_MSG_SOFTLIGHT_STRENGTH;Soft light - Strength
-!HISTORY_MSG_TM_FATTAL_ANCHOR;DRC - Anchor
-!HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s
-!ICCPROFCREATOR_COPYRIGHT;Copyright:
-!ICCPROFCREATOR_COPYRIGHT_RESET_TOOLTIP;Reset to the default copyright, granted to "RawTherapee, CC0"
-!ICCPROFCREATOR_CUSTOM;Custom
-!ICCPROFCREATOR_DESCRIPTION;Description:
-!ICCPROFCREATOR_DESCRIPTION_ADDPARAM;Append gamma and slope values to the description
-!ICCPROFCREATOR_DESCRIPTION_TOOLTIP;Leave empty to set the default description.
-!ICCPROFCREATOR_GAMMA;Gamma
-!ICCPROFCREATOR_ICCVERSION;ICC version:
-!ICCPROFCREATOR_ILL;Illuminant:
-!ICCPROFCREATOR_ILL_41;D41
-!ICCPROFCREATOR_ILL_50;D50
-!ICCPROFCREATOR_ILL_55;D55
-!ICCPROFCREATOR_ILL_60;D60
-!ICCPROFCREATOR_ILL_65;D65
-!ICCPROFCREATOR_ILL_80;D80
-!ICCPROFCREATOR_ILL_DEF;Default
-!ICCPROFCREATOR_ILL_INC;StdA 2856K
-!ICCPROFCREATOR_ILL_TOOLTIP;You can only set the illuminant for ICC v4 profiles.
-!ICCPROFCREATOR_PRIMARIES;Primaries:
-!ICCPROFCREATOR_PRIM_ACESP0;ACES AP0
-!ICCPROFCREATOR_PRIM_ACESP1;ACES AP1
-!ICCPROFCREATOR_PRIM_ADOBE;Adobe RGB (1998)
-!ICCPROFCREATOR_PRIM_BEST;BestRGB
-!ICCPROFCREATOR_PRIM_BETA;BetaRGB
-!ICCPROFCREATOR_PRIM_BLUX;Blue X
-!ICCPROFCREATOR_PRIM_BLUY;Blue Y
-!ICCPROFCREATOR_PRIM_BRUCE;BruceRGB
-!ICCPROFCREATOR_PRIM_GREX;Green X
-!ICCPROFCREATOR_PRIM_GREY;Green Y
-!ICCPROFCREATOR_PRIM_PROPH;Prophoto
-!ICCPROFCREATOR_PRIM_REC2020;Rec2020
-!ICCPROFCREATOR_PRIM_REDX;Red X
-!ICCPROFCREATOR_PRIM_REDY;Red Y
-!ICCPROFCREATOR_PRIM_SRGB;sRGB
-!ICCPROFCREATOR_PRIM_TOOLTIP;You can only set custom primaries for ICC v4 profiles.
-!ICCPROFCREATOR_PRIM_WIDEG;Widegamut
-!ICCPROFCREATOR_PROF_V2;ICC v2
-!ICCPROFCREATOR_PROF_V4;ICC v4
-!ICCPROFCREATOR_SAVEDIALOG_TITLE;Save ICC profile as...
-!ICCPROFCREATOR_SLOPE;Slope
-!ICCPROFCREATOR_TRC_PRESET;Tone response curve:
-!IPTCPANEL_CATEGORYHINT;Identifies the subject of the image in the opinion of the provider.
-!IPTCPANEL_CITYHINT;Enter the name of the city pictured in this image.
-!IPTCPANEL_COPYRIGHT;Copyright notice
-!IPTCPANEL_COPYRIGHTHINT;Enter a Notice on the current owner of the Copyright for this image, such as ©2008 Jane Doe.
-!IPTCPANEL_COUNTRYHINT;Enter the name of the country pictured in this image.
-!IPTCPANEL_CREATOR;Creator
-!IPTCPANEL_CREATORHINT;Enter the name of the person that created this image.
-!IPTCPANEL_CREATORJOBTITLE;Creator's job title
-!IPTCPANEL_CREATORJOBTITLEHINT;Enter the Job Title of the person listed in the Creator field.
-!IPTCPANEL_DATECREATEDHINT;Enter the Date the image was taken.
-!IPTCPANEL_DESCRIPTION;Description
-!IPTCPANEL_DESCRIPTIONHINT;Enter a "caption" describing the who, what, and why of what is happening in this image, this might include names of people, and/or their role in the action that is taking place within the image.
-!IPTCPANEL_DESCRIPTIONWRITER;Description writer
-!IPTCPANEL_DESCRIPTIONWRITERHINT;Enter the name of the person involved in writing, editing or correcting the description of the image.
-!IPTCPANEL_HEADLINEHINT;Enter a brief publishable synopsis or summary of the contents of the image.
-!IPTCPANEL_INSTRUCTIONSHINT;Enter information about embargoes, or other restrictions not covered by the Copyright field.
-!IPTCPANEL_KEYWORDSHINT;Enter any number of keywords, terms or phrases used to express the subject matter in the image.
-!IPTCPANEL_PROVINCE;Province or state
-!IPTCPANEL_PROVINCEHINT;Enter the name of the province or state pictured in this image.
-!IPTCPANEL_SOURCEHINT;Enter or edit the name of a person or party who has a role in the content supply chain, such as a person or entity from whom you received this image from.
-!IPTCPANEL_SUPPCATEGORIES;Supplemental categories
-!IPTCPANEL_SUPPCATEGORIESHINT;Further refines the subject of the image.
-!IPTCPANEL_TITLEHINT;Enter a short verbal and human readable name for the image, this may be the file name.
-!IPTCPANEL_TRANSREFERENCE;Job ID
-!IPTCPANEL_TRANSREFERENCEHINT;Enter a number or identifier needed for workflow control or tracking.
-!MAIN_BUTTON_FULLSCREEN;Fullscreen
-!MAIN_BUTTON_ICCPROFCREATOR;ICC Profile Creator
-!MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4
-!MAIN_BUTTON_NAVPREV_TOOLTIP;Navigate to the previous image relative to image opened in the Editor.\nShortcut: Shift-F3\n\nTo navigate to the previous image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F3
-!MAIN_BUTTON_NAVSYNC_TOOLTIP;Synchronize the File Browser or Filmstrip with the Editor to reveal the thumbnail of the currently opened image, and clear any active filters.\nShortcut: x\n\nAs above, but without clearing active filters:\nShortcut: y\n(Note that the thumbnail of the opened image will not be shown if filtered out).
-!MAIN_BUTTON_PUTTOQUEUE_TOOLTIP;Put current image to processing queue.\nShortcut: Ctrl+b
-!MAIN_BUTTON_SAVE_TOOLTIP;Save current image.\nShortcut: Ctrl+s\nSave current profile (.pp3).\nShortcut: Ctrl+Shift+s
-!MAIN_BUTTON_SENDTOEDITOR_TOOLTIP;Edit current image in external editor.\nShortcut: Ctrl+e
-!MAIN_BUTTON_SHOWHIDESIDEPANELS_TOOLTIP;Show/hide all side panels.\nShortcut: m
-!MAIN_BUTTON_UNFULLSCREEN;Exit fullscreen
-!MAIN_FRAME_BATCHQUEUE_TOOLTIP;Processing queue.\nShortcut: Ctrl-F3
-!MAIN_FRAME_EDITOR;Editor
-!MAIN_FRAME_EDITOR_TOOLTIP;Editor.\nShortcut: Ctrl-F4
-!MAIN_FRAME_FILEBROWSER_TOOLTIP;File browser.\nShortcut: Ctrl-F2
-!MAIN_FRAME_PLACES_DEL;Remove
-!MAIN_MSG_EMPTYFILENAME;Filename unspecified!
-!MAIN_MSG_IMAGEUNPROCESSED;This command requires all selected images to be queue-processed first.
-!MAIN_MSG_NAVIGATOR;Navigator
-!MAIN_MSG_OPERATIONCANCELLED;Operation cancelled
-!MAIN_MSG_PATHDOESNTEXIST;The path\n\n%1\n\ndoes not exist. Please set a correct path in Preferences.
-!MAIN_MSG_SETPATHFIRST;You first have to set a target path in Preferences in order to use this function!
-!MAIN_MSG_TOOMANYOPENEDITORS;Too many open editors.\nPlease close an editor to continue.
-!MAIN_MSG_WRITEFAILED;Failed to write\n"%1"\n\nMake sure that the folder exists and that you have write permission to it.
-!MAIN_TAB_ADVANCED;Advanced
-!MAIN_TAB_ADVANCED_TOOLTIP;Shortcut: Alt-w
-!MAIN_TAB_COLOR_TOOLTIP;Shortcut: Alt-c
-!MAIN_TAB_DETAIL_TOOLTIP;Shortcut: Alt-d
-!MAIN_TAB_EXPORT; Fast Export
-!MAIN_TAB_EXPOSURE_TOOLTIP;Shortcut: Alt-e
-!MAIN_TAB_FAVORITES;Favorites
-!MAIN_TAB_FAVORITES_TOOLTIP;Shortcut: Alt-u
-!MAIN_TAB_INSPECT; Inspect
-!MAIN_TAB_METADATA_TOOLTIP;Shortcut: Alt-m
-!MAIN_TAB_RAW;Raw
-!MAIN_TAB_RAW_TOOLTIP;Shortcut: Alt-r
-!MAIN_TAB_TRANSFORM_TOOLTIP;Shortcut: Alt-t
-!MAIN_TOOLTIP_BACKCOLOR0;Background color of the preview: theme-based\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR1;Background color of the preview: black\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR2;Background color of the preview: white\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR3;Background color of the preview: middle grey\nShortcut: 9
-!MAIN_TOOLTIP_BEFOREAFTERLOCK;Lock / Unlock the Before view\n\nLock: keep the Before view unchanged.\nUseful to evaluate the cumulative effect of multiple tools.\nAdditionally, comparisons can be made to any state in the History.\n\nUnlock: the Before view will follow the After view one step behind, showing the image before the effect of the currently used tool.
-!MAIN_TOOLTIP_PREVIEWB;Preview the blue channel.\nShortcut: b
-!MAIN_TOOLTIP_PREVIEWFOCUSMASK;Preview the focus mask.\nShortcut: Shift-f\n\nMore accurate on images with shallow depth of field, low noise and at higher zoom levels.\nZoom out to 10-30% to improve detection accuracy on noisy images.
-!MAIN_TOOLTIP_PREVIEWG;Preview the green channel.\nShortcut: g
-!MAIN_TOOLTIP_PREVIEWL;Preview the luminosity.\nShortcut: v\n\n0.299*R + 0.587*G + 0.114*B
-!MAIN_TOOLTIP_PREVIEWR;Preview the red channel.\nShortcut: r
-!MAIN_TOOLTIP_PREVIEWSHARPMASK;Preview the sharpening contrast mask.\nShortcut: p\n\nOnly works when sharpening is enabled and zoom >= 100%.
-!MAIN_TOOLTIP_SHOWHIDELP1;Show/Hide the left panel.\nShortcut: l
-!MAIN_TOOLTIP_SHOWHIDERP1;Show/Hide the right panel.\nShortcut: Alt-l
-!MAIN_TOOLTIP_SHOWHIDETP1;Show/Hide the top panel.\nShortcut: Shift-l
-!MAIN_TOOLTIP_THRESHOLD;Threshold
-!MAIN_TOOLTIP_TOGGLE;Toggle the Before/After view.\nShortcut: Shift-b
-!MONITOR_PROFILE_SYSTEM;System default
-!NAVIGATOR_B;B:
-!NAVIGATOR_G;G:
-!NAVIGATOR_H;H:
-!NAVIGATOR_LAB_A;a*:
-!NAVIGATOR_LAB_B;b*:
-!NAVIGATOR_LAB_L;L*:
-!NAVIGATOR_NA; --
-!NAVIGATOR_R;R:
-!NAVIGATOR_S;S:
-!NAVIGATOR_V;V:
-!NAVIGATOR_XY_FULL;Width: %1, Height: %2
-!NAVIGATOR_XY_NA;x: --, y: --
-!OPTIONS_BUNDLED_MISSING;The bundled profile "%1" could not be found!\n\nYour installation could be damaged.\n\nDefault internal values will be used instead.
-!OPTIONS_DEFIMG_MISSING;The default profile for non-raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!OPTIONS_DEFRAW_MISSING;The default profile for raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!PARTIALPASTE_ADVANCEDGROUP;Advanced Settings
-!PARTIALPASTE_CHANNELMIXER;Channel mixer
-!PARTIALPASTE_CHANNELMIXERBW;Black-and-white
-!PARTIALPASTE_COLORAPP;CIECAM02
-!PARTIALPASTE_COLORTONING;Color toning
-!PARTIALPASTE_COMMONTRANSFORMPARAMS;Auto-fill
-!PARTIALPASTE_DARKFRAMEAUTOSELECT;Dark-frame auto-selection
-!PARTIALPASTE_DARKFRAMEFILE;Dark-frame file
-!PARTIALPASTE_DEFRINGE;Defringe
-!PARTIALPASTE_DEHAZE;Haze removal
-!PARTIALPASTE_DETAILGROUP;Detail Settings
-!PARTIALPASTE_DIRPYRDENOISE;Noise reduction
-!PARTIALPASTE_DIRPYREQUALIZER;Contrast by detail levels
-!PARTIALPASTE_EPD;Tone mapping
-!PARTIALPASTE_EQUALIZER;Wavelet levels
-!PARTIALPASTE_EVERYTHING;Everything
-!PARTIALPASTE_FILMSIMULATION;Film simulation
-!PARTIALPASTE_FLATFIELDAUTOSELECT;Flat-field auto-selection
-!PARTIALPASTE_FLATFIELDBLURRADIUS;Flat-field blur radius
-!PARTIALPASTE_FLATFIELDBLURTYPE;Flat-field blur type
-!PARTIALPASTE_FLATFIELDCLIPCONTROL;Flat-field clip control
-!PARTIALPASTE_FLATFIELDFILE;Flat-field file
-!PARTIALPASTE_GRADIENT;Graduated filter
-!PARTIALPASTE_HSVEQUALIZER;HSV equalizer
-!PARTIALPASTE_IMPULSEDENOISE;Impulse noise reduction
-!PARTIALPASTE_LABCURVE;L*a*b* adjustments
-!PARTIALPASTE_LENSPROFILE;Profiled lens correction
-!PARTIALPASTE_LOCALCONTRAST;Local contrast
-!PARTIALPASTE_METADATA;Metadata mode
-!PARTIALPASTE_PCVIGNETTE;Vignette filter
-!PARTIALPASTE_PERSPECTIVE;Perspective
-!PARTIALPASTE_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!PARTIALPASTE_PREPROCESS_GREENEQUIL;Green equilibration
-!PARTIALPASTE_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!PARTIALPASTE_PREPROCESS_LINEDENOISE;Line noise filter
-!PARTIALPASTE_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!PARTIALPASTE_PRSHARPENING;Post-resize sharpening
-!PARTIALPASTE_RAWCACORR_AUTO;CA auto-correction
-!PARTIALPASTE_RAWCACORR_AVOIDCOLORSHIFT;CA avoid color shift
-!PARTIALPASTE_RAWCACORR_CAREDBLUE;CA red & blue
-!PARTIALPASTE_RAWEXPOS_BLACK;Black levels
-!PARTIALPASTE_RAWEXPOS_LINEAR;White point correction
-!PARTIALPASTE_RAWGROUP;Raw Settings
-!PARTIALPASTE_RAW_BORDER;Raw border
-!PARTIALPASTE_RAW_DCBENHANCE;DCB enhancement
-!PARTIALPASTE_RAW_DCBITERATIONS;DCB iterations
-!PARTIALPASTE_RAW_DMETHOD;Demosaic method
-!PARTIALPASTE_RAW_FALSECOLOR;False color suppression
-!PARTIALPASTE_RAW_IMAGENUM;Sub-image
-!PARTIALPASTE_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!PARTIALPASTE_RAW_PIXELSHIFT;Pixel Shift
-!PARTIALPASTE_RETINEX;Retinex
-!PARTIALPASTE_RGBCURVES;RGB curves
-!PARTIALPASTE_SHARPENEDGE;Edges
-!PARTIALPASTE_SHARPENMICRO;Microcontrast
-!PARTIALPASTE_SOFTLIGHT;Soft light
-!PARTIALPASTE_TM_FATTAL;Dynamic range compression
-!PARTIALPASTE_VIBRANCE;Vibrance
-!PREFERENCES_ADD;Add
-!PREFERENCES_APPEARANCE;Appearance
-!PREFERENCES_APPEARANCE_COLORPICKERFONT;Color picker font
-!PREFERENCES_APPEARANCE_CROPMASKCOLOR;Crop mask color
-!PREFERENCES_APPEARANCE_MAINFONT;Main font
-!PREFERENCES_APPEARANCE_NAVGUIDECOLOR;Navigator guide color
-!PREFERENCES_APPEARANCE_THEME;Theme
-!PREFERENCES_AUTOMONPROFILE;Use operating system's main monitor color profile
-!PREFERENCES_AUTOSAVE_TP_OPEN;Save tool collapsed/expanded state on exit
-!PREFERENCES_BATCH_PROCESSING;Batch Processing
-!PREFERENCES_BEHADDALL;All to 'Add'
-!PREFERENCES_BEHADDALLHINT;Set all parameters to the Add mode.\nAdjustments of parameters in the batch tool panel will be deltas to the stored values.
-!PREFERENCES_BEHAVIOR;Behavior
-!PREFERENCES_BEHSETALL;All to 'Set'
-!PREFERENCES_BEHSETALLHINT;Set all parameters to the Set mode.\nAdjustments of parameters in the batch tool panel will be absolute, the actual values will be displayed.
-!PREFERENCES_BLACKBODY;Tungsten
-!PREFERENCES_CACHECLEAR;Clear
-!PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
-!PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
-!PREFERENCES_CACHECLEAR_ONLYPROFILES;Clear only cached processing profiles:
-!PREFERENCES_CACHECLEAR_SAFETY;Only files in the cache are cleared. Processing profiles stored alongside the source images are not touched.
-!PREFERENCES_CHUNKSIZES;Tiles per thread
-!PREFERENCES_CHUNKSIZE_RAW_AMAZE;AMaZE demosaic
-!PREFERENCES_CHUNKSIZE_RAW_CA;Raw CA correction
-!PREFERENCES_CHUNKSIZE_RAW_RCD;RCD demosaic
-!PREFERENCES_CHUNKSIZE_RAW_XT;Xtrans demosaic
-!PREFERENCES_CHUNKSIZE_RGB;RGB processing
-!PREFERENCES_CLUTSCACHE;HaldCLUT Cache
-!PREFERENCES_CLUTSCACHE_LABEL;Maximum number of cached CLUTs
-!PREFERENCES_CLUTSDIR;HaldCLUT directory
-!PREFERENCES_CMMBPC;Black point compensation
-!PREFERENCES_CROP;Crop Editing
-!PREFERENCES_CROP_AUTO_FIT;Automatically zoom to fit the crop
-!PREFERENCES_CROP_GUIDES;Guides shown when not editing the crop
-!PREFERENCES_CROP_GUIDES_FRAME;Frame
-!PREFERENCES_CROP_GUIDES_FULL;Original
-!PREFERENCES_CROP_GUIDES_NONE;None
-!PREFERENCES_CURVEBBOXPOS;Position of curve copy & paste buttons
-!PREFERENCES_CURVEBBOXPOS_ABOVE;Above
-!PREFERENCES_CURVEBBOXPOS_BELOW;Below
-!PREFERENCES_CURVEBBOXPOS_LEFT;Left
-!PREFERENCES_CURVEBBOXPOS_RIGHT;Right
-!PREFERENCES_CUSTPROFBUILD;Custom Processing Profile Builder
-!PREFERENCES_CUSTPROFBUILDHINT;Executable (or script) file called when a new initial processing profile should be generated for an image.\n\nThe path of the communication file (*.ini style, a.k.a. "Keyfile") is added as a command line parameter. It contains various parameters required for the scripts and image Exif to allow a rules-based processing profile generation.\n\nWARNING: You are responsible for using double quotes where necessary if you're using paths containing spaces.
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys format
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
-!PREFERENCES_CUSTPROFBUILDPATH;Executable path
-!PREFERENCES_D50;Settings in main menu
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_D55;5500K
-!PREFERENCES_D60;6000K
-!PREFERENCES_D65;6500K
-!PREFERENCES_DARKFRAMEFOUND;Found
-!PREFERENCES_DARKFRAMESHOTS;shots
-!PREFERENCES_DARKFRAMETEMPLATES;templates
-!PREFERENCES_DIRDARKFRAMES;Dark-frames directory
-!PREFERENCES_DIRECTORIES;Directories
-!PREFERENCES_EDITORCMDLINE;Custom command line
-!PREFERENCES_EDITORLAYOUT;Editor layout
-!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_FLATFIELDFOUND;Found
-!PREFERENCES_FLATFIELDSDIR;Flat-fields directory
-!PREFERENCES_FLATFIELDSHOTS;shots
-!PREFERENCES_FLATFIELDTEMPLATES;templates
-!PREFERENCES_FLUOF2;Fluorescent F2
-!PREFERENCES_FLUOF7;Fluorescent F7
-!PREFERENCES_FLUOF11;Fluorescent F11
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY;Output device's Yb luminance (%)
-!PREFERENCES_GREY05;Yb=05 CIE L#30
-!PREFERENCES_GREY10;Yb=10 CIE L#40
-!PREFERENCES_GREY15;Yb=15 CIE L#45
-!PREFERENCES_GREY18;Settings in main menu
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREY23;Yb=23 CIE L#55
-!PREFERENCES_GREY30;Yb=30 CIE L#60
-!PREFERENCES_GREY40;Yb=40 CIE L#70
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram in left panel
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
-!PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
-!PREFERENCES_INSPECT_LABEL;Inspect
-!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
-!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
-!PREFERENCES_INTERNALTHUMBIFUNTOUCHED;Show embedded JPEG thumbnail if raw is unedited
-!PREFERENCES_LANG;Language
-!PREFERENCES_LANGAUTODETECT;Use system language
-!PREFERENCES_MAXRECENTFOLDERS;Maximum number of recent folders
-!PREFERENCES_MENUGROUPEXTPROGS;Group "Open with"
-!PREFERENCES_MENUGROUPFILEOPERATIONS;Group "File operations"
-!PREFERENCES_MENUGROUPLABEL;Group "Color label"
-!PREFERENCES_MENUGROUPPROFILEOPERATIONS;Group "Processing profile operations"
-!PREFERENCES_MENUGROUPRANK;Group "Rank"
-!PREFERENCES_MENUOPTIONS;Context Menu Options
-!PREFERENCES_METADATA;Metadata
-!PREFERENCES_MONINTENT;Default rendering intent
-!PREFERENCES_MONITOR;Monitor
-!PREFERENCES_MONPROFILE;Default color profile
-!PREFERENCES_MONPROFILE_WARNOSX;Due to MacOS limitations, only sRGB is supported.
-!PREFERENCES_MULTITAB;Multiple Editor Tabs Mode
-!PREFERENCES_MULTITABDUALMON;Multiple Editor Tabs In Own Window Mode
-!PREFERENCES_NAVIGATIONFRAME;Navigation
-!PREFERENCES_OVERLAY_FILENAMES;Overlay filenames on thumbnails in the file browser
-!PREFERENCES_OVERLAY_FILENAMES_FILMSTRIP;Overlay filenames on thumbnails in the editor pannel
-!PREFERENCES_OVERWRITEOUTPUTFILE;Overwrite existing output files
-!PREFERENCES_PANFACTORLABEL;Pan rate amplification
-!PREFERENCES_PARSEDEXTDOWNHINT;Move selected extension down in the list.
-!PREFERENCES_PARSEDEXTUPHINT;Move selected extension up in the list.
-!PREFERENCES_PERFORMANCE_MEASURE;Measure
-!PREFERENCES_PERFORMANCE_MEASURE_HINT;Logs processing times in console
-!PREFERENCES_PERFORMANCE_THREADS;Threads
-!PREFERENCES_PERFORMANCE_THREADS_LABEL;Maximum number of threads for Noise Reduction and Wavelet Levels (0 = Automatic)
-!PREFERENCES_PREVDEMO;Preview Demosaic Method
-!PREFERENCES_PREVDEMO_FAST;Fast
-!PREFERENCES_PREVDEMO_LABEL;Demosaicing method used for the preview at <100% zoom:
-!PREFERENCES_PREVDEMO_SIDECAR;As in PP3
-!PREFERENCES_PRINTER;Printer (Soft-Proofing)
-!PREFERENCES_PROFILESAVEBOTH;Save processing profile both to the cache and next to the input file
-!PREFERENCES_PROFILESAVELOCATION;Processing profile saving location
-!PREFERENCES_PROFILE_NONE;None
-!PREFERENCES_PROPERTY;Property
-!PREFERENCES_PRTINTENT;Rendering intent
-!PREFERENCES_PRTPROFILE;Color profile
-!PREFERENCES_REMEMBERZOOMPAN;Remember zoom % and pan offset
-!PREFERENCES_REMEMBERZOOMPAN_TOOLTIP;Remember the zoom % and pan offset of the current image when opening a new image.\n\nThis option only works in "Single Editor Tab Mode" and when "Demosaicing method used for the preview at <100% zoom" is set to "As in PP3".
-!PREFERENCES_SAVE_TP_OPEN_NOW;Save tool collapsed/expanded state now
-!PREFERENCES_SERIALIZE_TIFF_READ;TIFF Read Settings
-!PREFERENCES_SERIALIZE_TIFF_READ_LABEL;Serialize reading of TIFF files
-!PREFERENCES_SERIALIZE_TIFF_READ_TOOLTIP;Enabling this option when working with folders containing uncompressed TIFF files can increase performance of thumbnail generation.
-!PREFERENCES_SET;Set
-!PREFERENCES_SHOWEXPOSURECOMPENSATION;Append exposure compensation
-!PREFERENCES_SHOWFILMSTRIPTOOLBAR;Show Filmstrip toolbar
-!PREFERENCES_SINGLETAB;Single Editor Tab Mode
-!PREFERENCES_SINGLETABVERTAB;Single Editor Tab Mode, Vertical Tabs
-!PREFERENCES_SND_BATCHQUEUEDONE;Queue processing done
-!PREFERENCES_SND_HELP;Enter a full file path to set a sound, or leave blank for no sound.\nFor system sounds on Windows use "SystemDefault", "SystemAsterisk" etc., and on Linux use "complete", "window-attention" etc.
-!PREFERENCES_SND_LNGEDITPROCDONE;Editor processing done
-!PREFERENCES_SND_THRESHOLDSECS;After seconds
-!PREFERENCES_TAB_DYNAMICPROFILE;Dynamic Profile Rules
-!PREFERENCES_TAB_PERFORMANCE;Performance
-!PREFERENCES_TAB_SOUND;Sounds
-!PREFERENCES_THUMBNAIL_INSPECTOR_JPEG;Embedded JPEG preview
-!PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TP_LABEL;Tool panel:
-!PREFERENCES_TP_VSCROLLBAR;Hide vertical scrollbar
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
-!PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-!PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
-!PREFERENCES_WORKFLOW;Layout
-!PROFILEPANEL_COPYPPASTE;Parameters to copy
-!PROFILEPANEL_GLOBALPROFILES;Bundled profiles
-!PROFILEPANEL_LOADPPASTE;Parameters to load
-!PROFILEPANEL_MODE_TIP;Processing profile fill mode.\n\nButton pressed: partial profiles will be converted to full profiles; the missing values will be replaced with hard-coded defaults.\n\nButton released: profiles will be applied as they are, altering only those values which they contain.
-!PROFILEPANEL_MYPROFILES;My profiles
-!PROFILEPANEL_PASTEPPASTE;Parameters to paste
-!PROFILEPANEL_PDYNAMIC;Dynamic
-!PROFILEPANEL_PINTERNAL;Neutral
-!PROFILEPANEL_SAVEPPASTE;Parameters to save
-!PROGRESSBAR_DECODING;Decoding...
-!PROGRESSBAR_GREENEQUIL;Green equilibration...
-!PROGRESSBAR_HLREC;Highlight reconstruction...
-!PROGRESSBAR_HOTDEADPIXELFILTER;Hot/dead pixel filter...
-!PROGRESSBAR_LINEDENOISE;Line noise filter...
-!PROGRESSBAR_LOADINGTHUMBS;Loading thumbnails...
-!PROGRESSBAR_NOIMAGES;No images found
-!PROGRESSBAR_PROCESSING_PROFILESAVED;Processing profile saved
-!PROGRESSBAR_RAWCACORR;Raw CA correction...
-!PROGRESSBAR_SNAPSHOT_ADDED;Snapshot added
-!PROGRESSDLG_PROFILECHANGEDINBROWSER;Processing profile changed in browser
-!QINFO_FRAMECOUNT;%2 frames
-!QINFO_HDR;HDR / %2 frame(s)
-!QINFO_PIXELSHIFT;Pixel Shift / %2 frame(s)
-!SAMPLEFORMAT_0;Unknown data format
-!SAMPLEFORMAT_1;8-bit unsigned
-!SAMPLEFORMAT_2;16-bit unsigned
-!SAMPLEFORMAT_4;24-bit LogLuv
-!SAMPLEFORMAT_8;32-bit LogLuv
-!SAMPLEFORMAT_16;16-bit floating-point
-!SAMPLEFORMAT_32;24-bit floating-point
-!SAMPLEFORMAT_64;32-bit floating-point
-!SAVEDLG_AUTOSUFFIX;Automatically add a suffix if the file already exists
-!SAVEDLG_FILEFORMAT_FLOAT; floating-point
-!SAVEDLG_FORCEFORMATOPTS;Force saving options
-!SAVEDLG_SUBSAMP;Subsampling
-!SAVEDLG_SUBSAMP_1;Best compression
-!SAVEDLG_SUBSAMP_2;Balanced
-!SAVEDLG_SUBSAMP_3;Best quality
-!SAVEDLG_SUBSAMP_TOOLTIP;Best compression:\nJ:a:b 4:2:0\nh/v 2/2\nChroma halved horizontally and vertically.\n\nBalanced:\nJ:a:b 4:2:2\nh/v 2/1\nChroma halved horizontally.\n\nBest quality:\nJ:a:b 4:4:4\nh/v 1/1\nNo chroma subsampling.
-!SAVEDLG_TIFFUNCOMPRESSED;Uncompressed TIFF
-!SAVEDLG_WARNFILENAME;File will be named
-!SHCSELECTOR_TOOLTIP;Click right mouse button to reset the position of those 3 sliders.
-!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
-!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!THRESHOLDSELECTOR_B;Bottom
-!THRESHOLDSELECTOR_BL;Bottom-left
-!THRESHOLDSELECTOR_BR;Bottom-right
-!THRESHOLDSELECTOR_HINT;Hold the Shift key to move individual control points.
-!THRESHOLDSELECTOR_T;Top
-!THRESHOLDSELECTOR_TL;Top-left
-!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
-!TP_BWMIX_ALGO;Algorithm OYCPM
-!TP_BWMIX_ALGO_LI;Linear
-!TP_BWMIX_ALGO_SP;Special effects
-!TP_BWMIX_ALGO_TOOLTIP;Linear: will produce a normal linear response.\nSpecial effects: will produce special effects by mixing channels non-linearly.
-!TP_BWMIX_AUTOCH;Auto
-!TP_BWMIX_CC_ENABLED;Adjust complementary color
-!TP_BWMIX_CC_TOOLTIP;Enable to allow automatic adjustment of complementary colors in ROYGCBPM mode.
-!TP_BWMIX_CHANNEL;Luminance equalizer
-!TP_BWMIX_CURVEEDITOR1;'Before' curve
-!TP_BWMIX_CURVEEDITOR2;'After' curve
-!TP_BWMIX_CURVEEDITOR_AFTER_TOOLTIP;Tone curve, after B&W conversion, at the end of treatment.
-!TP_BWMIX_CURVEEDITOR_BEFORE_TOOLTIP;Tone curve, just before B&W conversion.\nMay take into account the color components.
-!TP_BWMIX_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H).\nPay attention to extreme values as they may cause artifacts.
-!TP_BWMIX_FILTER;Color Filter
-!TP_BWMIX_FILTER_BLUE;Blue
-!TP_BWMIX_FILTER_BLUEGREEN;Blue-Green
-!TP_BWMIX_FILTER_GREEN;Green
-!TP_BWMIX_FILTER_GREENYELLOW;Green-Yellow
-!TP_BWMIX_FILTER_NONE;None
-!TP_BWMIX_FILTER_PURPLE;Purple
-!TP_BWMIX_FILTER_RED;Red
-!TP_BWMIX_FILTER_REDYELLOW;Red-Yellow
-!TP_BWMIX_FILTER_TOOLTIP;The color filter simulates shots taken with a colored filter placed in front of the lens. Colored filters reduce the transmission of specific color ranges and therefore affect their lightness. E.g. a red filter darkens blue skies.
-!TP_BWMIX_FILTER_YELLOW;Yellow
-!TP_BWMIX_GAMMA;Gamma Correction
-!TP_BWMIX_GAM_TOOLTIP;Correct gamma for each RGB channel.
-!TP_BWMIX_LABEL;Black-and-White
-!TP_BWMIX_MET;Method
-!TP_BWMIX_MET_CHANMIX;Channel Mixer
-!TP_BWMIX_MET_DESAT;Desaturation
-!TP_BWMIX_MET_LUMEQUAL;Luminance Equalizer
-!TP_BWMIX_MIXC;Channel Mixer
-!TP_BWMIX_NEUTRAL;Reset
-!TP_BWMIX_RGBLABEL;R: %1%% G: %2%% B: %3%% Total: %4%%
-!TP_BWMIX_RGBLABEL_HINT;Final RGB factors that take care of all the mixer options.\n"Total" displays the sum of the RGB values:\n- always 100% in relative mode\n- higher (lighter) or lower (darker) than 100% in absolute mode.
-!TP_BWMIX_RGB_TOOLTIP;Mix the RGB channels. Use presets for guidance.\nPay attention to negative values that may cause artifacts or erratic behavior.
-!TP_BWMIX_SETTING;Presets
-!TP_BWMIX_SETTING_TOOLTIP;Different presets (film, landscape, etc.) or manual Channel Mixer settings.
-!TP_BWMIX_SET_HIGHCONTAST;High contrast
-!TP_BWMIX_SET_HIGHSENSIT;High Sensitivity
-!TP_BWMIX_SET_HYPERPANCHRO;Hyper Panchromatic
-!TP_BWMIX_SET_INFRARED;Infrared
-!TP_BWMIX_SET_LANDSCAPE;Landscape
-!TP_BWMIX_SET_LOWSENSIT;Low Sensitivity
-!TP_BWMIX_SET_LUMINANCE;Luminance
-!TP_BWMIX_SET_NORMCONTAST;Normal Contrast
-!TP_BWMIX_SET_ORTHOCHRO;Orthochromatic
-!TP_BWMIX_SET_PANCHRO;Panchromatic
-!TP_BWMIX_SET_PORTRAIT;Portrait
-!TP_BWMIX_SET_RGBABS;Absolute RGB
-!TP_BWMIX_SET_RGBREL;Relative RGB
-!TP_BWMIX_SET_ROYGCBPMABS;Absolute ROYGCBPM
-!TP_BWMIX_SET_ROYGCBPMREL;Relative ROYGCBPM
-!TP_BWMIX_TCMODE_FILMLIKE;B&W Film-like
-!TP_BWMIX_TCMODE_SATANDVALBLENDING;B&W Saturation and Value Blending
-!TP_BWMIX_TCMODE_STANDARD;B&W Standard
-!TP_BWMIX_TCMODE_WEIGHTEDSTD;B&W Weighted Standard
-!TP_BWMIX_VAL;L
-!TP_CBDL_AFT;After Black-and-White
-!TP_CBDL_BEF;Before Black-and-White
-!TP_CBDL_METHOD;Process located
-!TP_CBDL_METHOD_TOOLTIP;Choose whether the Contrast by Detail Levels tool is to be positioned after the Black-and-White tool, which makes it work in L*a*b* space, or before it, which makes it work in RGB space.
-!TP_CHROMATABERR_LABEL;Chromatic Aberration
-!TP_COLORAPP_ABSOLUTELUMINANCE;Absolute luminance
-!TP_COLORAPP_ALGO;Algorithm
-!TP_COLORAPP_ALGO_ALL;All
-!TP_COLORAPP_ALGO_JC;Lightness + Chroma (JC)
-!TP_COLORAPP_ALGO_JS;Lightness + Saturation (JS)
-!TP_COLORAPP_ALGO_QM;Brightness + Colorfulness (QM)
-!TP_COLORAPP_ALGO_TOOLTIP;Lets you choose between parameter subsets or all parameters.
-!TP_COLORAPP_BADPIXSL;Hot/bad pixel filter
-!TP_COLORAPP_BADPIXSL_TOOLTIP;Suppression of hot/bad (brightly colored) pixels.\n0 = No effect\n1 = Median\n2 = Gaussian.\nAlternatively, adjust the image to avoid very dark shadows.\n\nThese artifacts are due to limitations of CIECAM02.
-!TP_COLORAPP_BRIGHT;Brightness (Q)
-!TP_COLORAPP_BRIGHT_TOOLTIP;Brightness in CIECAM02 takes into account the white's luminosity and differs from L*a*b* and RGB brightness.
-!TP_COLORAPP_CAT02ADAPTATION_TOOLTIP;When setting manually, values above 65 are recommended.
-!TP_COLORAPP_CHROMA;Chroma (C)
-!TP_COLORAPP_CHROMA_M;Colorfulness (M)
-!TP_COLORAPP_CHROMA_M_TOOLTIP;Colorfulness in CIECAM02 differs from L*a*b* and RGB colorfulness.
-!TP_COLORAPP_CHROMA_S;Saturation (S)
-!TP_COLORAPP_CHROMA_S_TOOLTIP;Saturation in CIECAM02 differs from L*a*b* and RGB saturation.
-!TP_COLORAPP_CHROMA_TOOLTIP;Chroma in CIECAM02 differs from L*a*b* and RGB chroma.
-!TP_COLORAPP_CIECAT_DEGREE;CAT02 adaptation
-!TP_COLORAPP_CONTRAST;Contrast (J)
-!TP_COLORAPP_CONTRAST_Q;Contrast (Q)
-!TP_COLORAPP_CONTRAST_Q_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CONTRAST_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CURVEEDITOR1;Tone curve 1
-!TP_COLORAPP_CURVEEDITOR1_TOOLTIP;Shows the histogram of L* (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of J or Q after CIECAM02.\n\nJ and Q are not shown in the main histogram panel.\n\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_CURVEEDITOR2;Tone curve 2
-!TP_COLORAPP_CURVEEDITOR2_TOOLTIP;Same usage as with the second exposure tone curve.
-!TP_COLORAPP_CURVEEDITOR3;Color curve
-!TP_COLORAPP_CURVEEDITOR3_TOOLTIP;Adjust either chroma, saturation or colorfulness.\n\nShows the histogram of chromaticity (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of C, s or M after CIECAM02.\n\nC, s and M are not shown in the main histogram panel.\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_DATACIE;CIECAM02 output histograms in curves
-!TP_COLORAPP_DATACIE_TOOLTIP;When enabled, histograms in CIECAM02 curves show approximate values/ranges for J or Q, and C, s or M after the CIECAM02 adjustments.\nThis selection does not impact the main histogram panel.\n\nWhen disabled, histograms in CIECAM02 curves show L*a*b* values before CIECAM02 adjustments.
-!TP_COLORAPP_FREE;Free temp+green + CAT02 + [output]
-!TP_COLORAPP_GAMUT;Gamut control (L*a*b*)
-!TP_COLORAPP_GAMUT_TOOLTIP;Allow gamut control in L*a*b* mode.
-!TP_COLORAPP_HUE;Hue (h)
-!TP_COLORAPP_HUE_TOOLTIP;Hue (h) - angle between 0° and 360°.
-!TP_COLORAPP_LABEL;CIE Color Appearance Model 2002
-!TP_COLORAPP_LABEL_CAM02;Image Adjustments
-!TP_COLORAPP_LABEL_SCENE;Scene Conditions
-!TP_COLORAPP_LABEL_VIEWING;Viewing Conditions
-!TP_COLORAPP_LIGHT;Lightness (J)
-!TP_COLORAPP_LIGHT_TOOLTIP;Lightness in CIECAM02 differs from L*a*b* and RGB lightness.
-!TP_COLORAPP_MEANLUMINANCE;Mean luminance (Yb%)
-!TP_COLORAPP_MODEL;WP Model
-!TP_COLORAPP_MODEL_TOOLTIP;White-Point Model.\n\nWB [RT] + [output]: RT's white balance is used for the scene, CIECAM02 is set to D50, and the output device's white balance is set in Viewing Conditions.\n\nWB [RT+CAT02] + [output]: RT's white balance settings are used by CAT02 and the output device's white balance is set in Viewing Conditions.\n\nFree temp+green + CAT02 + [output]: temp and green are selected by the user, the output device's white balance is set in Viewing Conditions.
-!TP_COLORAPP_NEUTRAL;Reset
-!TP_COLORAPP_NEUTRAL_TIP;Reset all sliders checkbox and curves to their default values
-!TP_COLORAPP_RSTPRO;Red & skin-tones protection
-!TP_COLORAPP_RSTPRO_TOOLTIP;Red & skin-tones protection affects both sliders and curves.
-!TP_COLORAPP_SURROUND;Surround
-!TP_COLORAPP_SURROUND_AVER;Average
-!TP_COLORAPP_SURROUND_DARK;Dark
-!TP_COLORAPP_SURROUND_DIM;Dim
-!TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
-!TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\nAverage: Average light environment (standard). The image will not change.\n\nDim: Dim environment (TV). The image will become slighty dark.\n\nDark: Dark environment (projector). The image will become more dark.\n\nExtremly Dark: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
-!TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
-!TP_COLORAPP_TCMODE_CHROMA;Chroma
-!TP_COLORAPP_TCMODE_COLORF;Colorfulness
-!TP_COLORAPP_TCMODE_LABEL1;Curve mode 1
-!TP_COLORAPP_TCMODE_LABEL2;Curve mode 2
-!TP_COLORAPP_TCMODE_LABEL3;Curve chroma mode
-!TP_COLORAPP_TCMODE_LIGHTNESS;Lightness
-!TP_COLORAPP_TCMODE_SATUR;Saturation
-!TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD50 temp=5003\nD55 temp=5503\nD65 temp=6504\nD75 temp=7504
-!TP_COLORAPP_TONECIE;Tone mapping using CIECAM02
-!TP_COLORAPP_TONECIE_TOOLTIP;If this option is disabled, tone mapping is done in L*a*b* space.\nIf this option is enabled, tone mapping is done using CIECAM02.\nThe Tone Mapping tool must be enabled for this setting to take effect.
-!TP_COLORAPP_VIEWING_ABSOLUTELUMINANCE_TOOLTIP;Absolute luminance of the viewing environment\n(usually 16 cd/m²).
-!TP_COLORAPP_WBCAM;WB [RT+CAT02] + [output]
-!TP_COLORAPP_WBRT;WB [RT] + [output]
-!TP_COLORTONING_AB;o C/L
-!TP_COLORTONING_AUTOSAT;Automatic
-!TP_COLORTONING_BALANCE;Balance
-!TP_COLORTONING_BY;o C/L
-!TP_COLORTONING_CHROMAC;Opacity
-!TP_COLORTONING_COLOR;Color
-!TP_COLORTONING_CURVEEDITOR_CL_TOOLTIP;Chroma opacity as a function of luminance oC=f(L)
-!TP_COLORTONING_HIGHLIGHT;Highlights
-!TP_COLORTONING_HUE;Hue
-!TP_COLORTONING_LAB;L*a*b* blending
-!TP_COLORTONING_LABEL;Color Toning
-!TP_COLORTONING_LABGRID;L*a*b* color correction grid
-!TP_COLORTONING_LABGRID_VALUES;HL: a=%1 b=%2\nS: a=%3 b=%4
-!TP_COLORTONING_LABREGIONS;Color correction regions
-!TP_COLORTONING_LABREGION_ABVALUES;a=%1 b=%2
-!TP_COLORTONING_LABREGION_CHANNEL;Channel
-!TP_COLORTONING_LABREGION_CHANNEL_ALL;All
-!TP_COLORTONING_LABREGION_CHANNEL_B;Blue
-!TP_COLORTONING_LABREGION_CHANNEL_G;Green
-!TP_COLORTONING_LABREGION_CHANNEL_R;Red
-!TP_COLORTONING_LABREGION_CHROMATICITYMASK;C
-!TP_COLORTONING_LABREGION_HUEMASK;H
-!TP_COLORTONING_LABREGION_LIGHTNESS;Lightness
-!TP_COLORTONING_LABREGION_LIGHTNESSMASK;L
-!TP_COLORTONING_LABREGION_LIST_TITLE;Correction
-!TP_COLORTONING_LABREGION_MASK;Mask
-!TP_COLORTONING_LABREGION_MASKBLUR;Mask Blur
-!TP_COLORTONING_LABREGION_OFFSET;Offset
-!TP_COLORTONING_LABREGION_POWER;Power
-!TP_COLORTONING_LABREGION_SATURATION;Saturation
-!TP_COLORTONING_LABREGION_SHOWMASK;Show mask
-!TP_COLORTONING_LABREGION_SLOPE;Slope
-!TP_COLORTONING_LUMA;Luminance
-!TP_COLORTONING_LUMAMODE;Preserve luminance
-!TP_COLORTONING_LUMAMODE_TOOLTIP;If enabled, when you change color (red, green, cyan, blue, etc.) the luminance of each pixel is preserved.
-!TP_COLORTONING_METHOD;Method
-!TP_COLORTONING_METHOD_TOOLTIP;"L*a*b* blending", "RGB sliders" and "RGB curves" use interpolated color blending.\n"Color balance (Shadows/Midtones/Highlights)" and "Saturation 2 colors" use direct colors.\n\nThe Black-and-White tool can be enabled when using any color toning method, which allows for color toning.
-!TP_COLORTONING_MIDTONES;Midtones
-!TP_COLORTONING_NEUTRAL;Reset sliders
-!TP_COLORTONING_NEUTRAL_TIP;Reset all values (Shadows, Midtones, Highlights) to default.
-!TP_COLORTONING_OPACITY;Opacity
-!TP_COLORTONING_RGBCURVES;RGB - Curves
-!TP_COLORTONING_RGBSLIDERS;RGB - Sliders
-!TP_COLORTONING_SA;Saturation Protection
-!TP_COLORTONING_SATURATEDOPACITY;Strength
-!TP_COLORTONING_SATURATIONTHRESHOLD;Threshold
-!TP_COLORTONING_SHADOWS;Shadows
-!TP_COLORTONING_SPLITCO;Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITCOCO;Color Balance Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITLR;Saturation 2 colors
-!TP_COLORTONING_STR;Strength
-!TP_COLORTONING_STRENGTH;Strength
-!TP_COLORTONING_TWO2;Special chroma '2 colors'
-!TP_COLORTONING_TWOALL;Special chroma
-!TP_COLORTONING_TWOBY;Special a* and b*
-!TP_COLORTONING_TWOCOLOR_TOOLTIP;Standard chroma:\nLinear response, a* = b*.\n\nSpecial chroma:\nLinear response, a* = b*, but unbound - try under the diagonal.\n\nSpecial a* and b*:\nLinear response unbound with separate curves for a* and b*. Intended for special effects.\n\nSpecial chroma 2 colors:\nMore predictable.
-!TP_COLORTONING_TWOSTD;Standard chroma
-!TP_CROP_GTEPASSPORT;Biometric Passport
-!TP_CROP_GTFRAME;Frame
-!TP_CROP_GTGRID;Grid
-!TP_CROP_GTHARMMEANS;Harmonic Means
-!TP_CROP_GTTRIANGLE1;Golden Triangles 1
-!TP_CROP_GTTRIANGLE2;Golden Triangles 2
-!TP_CROP_PPI;PPI
-!TP_CROP_RESETCROP;Reset
-!TP_CROP_SELECTCROP;Select
-!TP_DARKFRAME_AUTOSELECT;Auto-selection
-!TP_DARKFRAME_LABEL;Dark-Frame
-!TP_DEFRINGE_LABEL;Defringe
-!TP_DEFRINGE_RADIUS;Radius
-!TP_DEFRINGE_THRESHOLD;Threshold
-!TP_DEHAZE_DEPTH;Depth
-!TP_DEHAZE_LABEL;Haze Removal
-!TP_DEHAZE_SHOW_DEPTH_MAP;Show depth map
-!TP_DEHAZE_STRENGTH;Strength
-!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
-!TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
-!TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominance
-!TP_DIRPYRDENOISE_CHROMINANCE_MANUAL;Manual
-!TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Chrominance - Master
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD;Method
-!TP_DIRPYRDENOISE_CHROMINANCE_METHODADVANCED_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nAutomatic multi-zones\nNo preview - works only during saving, but using the "Preview" method by matching the tile size and center to the preview size and center you can get an idea of the expected results.\nThe image is divided into tiles (about 10 to 70 depending on image size) and each tile receives its own chrominance noise reduction settings.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_PMZ;Preview multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW;Preview
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEWRESIDUAL_INFO_TOOLTIP;Displays the remaining noise levels of the part of the image visible in the preview after wavelet.\n\n>300 Very noisy\n100-300 Noisy\n50-100 A little noisy\n<50 Very low noise\n\nBeware, the values will differ between RGB and L*a*b* mode. The RGB values are less accurate because the RGB mode does not completely separate luminance and chrominance.
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_INFO;Preview size=%1, Center: Px=%2 Py=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Preview noise: Mean=%1 High=%2
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= - High= -
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2 Ty=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
-!TP_DIRPYRDENOISE_LABEL;Noise Reduction
-!TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
-!TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
-!TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Detail recovery
-!TP_DIRPYRDENOISE_LUMINANCE_FRAME;Luminance
-!TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminance
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE;Color space
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;For raw images either RGB or L*a*b* methods can be used.\n\nFor non-raw images the L*a*b* method will be used, regardless of the selection.
-!TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
-!TP_DIRPYRDENOISE_MAIN_GAMMA_TOOLTIP;Gamma varies noise reduction strength across the range of tones. Smaller values will target shadows, while larger values will stretch the effect to the brighter tones.
-!TP_DIRPYRDENOISE_MAIN_MODE;Mode
-!TP_DIRPYRDENOISE_MAIN_MODE_AGGRESSIVE;Aggressive
-!TP_DIRPYRDENOISE_MAIN_MODE_CONSERVATIVE;Conservative
-!TP_DIRPYRDENOISE_MAIN_MODE_TOOLTIP;"Conservative" preserves low frequency chroma patterns, while "aggressive" obliterates them.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD;Median method
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_CHROMINANCE;Chroma only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LABEL;Median Filter
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LUMINANCE;Luminance only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_RGB;RGB
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_TOOLTIP;When using the "Luminance only" and "L*a*b*" methods, median filtering will be performed just after the wavelet step in the noise reduction pipeline.\nWhen using the "RGB" mode, it will be performed at the very end of the noise reduction pipeline.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_WEIGHTED;Weighted L* (little) + a*b* (normal)
-!TP_DIRPYRDENOISE_MEDIAN_PASSES;Median iterations
-!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
-!TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
-!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
-!TP_DIRPYRDENOISE_TYPE_3X3;3×3
-!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
-!TP_DIRPYRDENOISE_TYPE_5X5;5×5
-!TP_DIRPYRDENOISE_TYPE_5X5SOFT;5×5 soft
-!TP_DIRPYRDENOISE_TYPE_7X7;7×7
-!TP_DIRPYRDENOISE_TYPE_9X9;9×9
-!TP_DIRPYREQUALIZER_ALGO;Skin Color Range
-!TP_DIRPYREQUALIZER_ALGO_TOOLTIP;Fine: closer to the colors of the skin, minimizing the action on other colors\nLarge: avoid more artifacts.
-!TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts
-!TP_DIRPYREQUALIZER_HUESKIN;Skin hue
-!TP_DIRPYREQUALIZER_HUESKIN_TOOLTIP;This pyramid is for the upper part, so far as the algorithm at its maximum efficiency.\nTo the lower part, the transition zones.\nIf you need to move the area significantly to the left or right - or if there are artifacts: the white balance is incorrect\nYou can slightly reduce the zone to prevent the rest of the image is affected.
-!TP_DIRPYREQUALIZER_LABEL;Contrast by Detail Levels
-!TP_DIRPYREQUALIZER_LUMACOARSEST;Coarsest
-!TP_DIRPYREQUALIZER_LUMACONTRAST_MINUS;Contrast -
-!TP_DIRPYREQUALIZER_LUMACONTRAST_PLUS;Contrast +
-!TP_DIRPYREQUALIZER_LUMAFINEST;Finest
-!TP_DIRPYREQUALIZER_LUMANEUTRAL;Neutral
-!TP_DIRPYREQUALIZER_SKIN;Skin targetting/protection
-!TP_DIRPYREQUALIZER_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_DIRPYREQUALIZER_THRESHOLD;Threshold
-!TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image.
-!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
-!TP_EPD_EDGESTOPPING;Edge stopping
-!TP_EPD_GAMMA;Gamma
-!TP_EPD_LABEL;Tone Mapping
-!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
-!TP_EPD_SCALE;Scale
-!TP_EPD_STRENGTH;Strength
-!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
-!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
-!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
-!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
-!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
-!TP_EXPOSURE_CURVEEDITOR2;Tone curve 2
-!TP_EXPOSURE_CURVEEDITOR2_TOOLTIP;Please refer to the "Exposure > Tone Curves" RawPedia article to learn how to achieve the best results by using two tone curves.
-!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
-!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
-!TP_EXPOSURE_SATURATION;Saturation
-!TP_EXPOSURE_TCMODE_FILMLIKE;Film-like
-!TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1
-!TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2
-!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
-!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual
-!TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending
-!TP_EXPOSURE_TCMODE_STANDARD;Standard
-!TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard
-!TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points
-!TP_EXPOS_WHITEPOINT_LABEL;Raw White Points
-!TP_FILMSIMULATION_LABEL;Film Simulation
-!TP_FILMSIMULATION_SLOWPARSEDIR;RawTherapee is configured to look for Hald CLUT images, which are used for the Film Simulation tool, in a folder which is taking too long to load.\nGo to Preferences > Image Processing > Film Simulation\nto see which folder is being used. You should either point RawTherapee to a folder which contains only Hald CLUT images and nothing more, or to an empty folder if you don't want to use the Film Simulation tool.\n\nRead the Film Simulation article in RawPedia for more information.\n\nDo you want to cancel the scan now?
-!TP_FILMSIMULATION_STRENGTH;Strength
-!TP_FILMSIMULATION_ZEROCLUTSFOUND;Set HaldCLUT directory in Preferences
-!TP_FLATFIELD_AUTOSELECT;Auto-selection
-!TP_FLATFIELD_BLURRADIUS;Blur radius
-!TP_FLATFIELD_BLURTYPE;Blur type
-!TP_FLATFIELD_BT_AREA;Area
-!TP_FLATFIELD_BT_HORIZONTAL;Horizontal
-!TP_FLATFIELD_BT_VERTHORIZ;Vertical + Horizontal
-!TP_FLATFIELD_BT_VERTICAL;Vertical
-!TP_FLATFIELD_CLIPCONTROL;Clip control
-!TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Clip control avoids clipped highlights caused by applying the flat field. If there are already clipped highlights before applying the flat field, clip control can lead to color cast.
-!TP_FLATFIELD_LABEL;Flat-Field
-!TP_GENERAL_11SCALE_TOOLTIP;The effects of this tool are only visible or only accurate at a preview scale of 1:1.
-!TP_GRADIENT_CENTER;Center
-!TP_GRADIENT_CENTER_X;Center X
-!TP_GRADIENT_CENTER_X_TOOLTIP;Shift gradient to the left (negative values) or right (positive values).
-!TP_GRADIENT_CENTER_Y;Center Y
-!TP_GRADIENT_CENTER_Y_TOOLTIP;Shift gradient up (negative values) or down (positive values).
-!TP_GRADIENT_DEGREE;Angle
-!TP_GRADIENT_DEGREE_TOOLTIP;Rotation angle in degrees.
-!TP_GRADIENT_FEATHER;Feather
-!TP_GRADIENT_FEATHER_TOOLTIP;Gradient width in percent of the image diagonal.
-!TP_GRADIENT_LABEL;Graduated Filter
-!TP_GRADIENT_STRENGTH;Strength
-!TP_GRADIENT_STRENGTH_TOOLTIP;Filter strength in stops.
-!TP_HLREC_BLEND;Blend
-!TP_HLREC_ENA_TOOLTIP;Could be activated by Auto Levels.
-!TP_HSVEQUALIZER_CHANNEL;Channel
-!TP_HSVEQUALIZER_HUE;H
-!TP_HSVEQUALIZER_LABEL;HSV Equalizer
-!TP_HSVEQUALIZER_SAT;S
-!TP_HSVEQUALIZER_VAL;V
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Baseline exposure
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET_TOOLTIP;Employ the embedded DCP baseline exposure offset. The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYHUESATMAP;Base table
-!TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYLOOKTABLE;Look table
-!TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-!TP_ICM_BLENDCMSMATRIX;Blend ICC highlights with matrix
-!TP_ICM_BLENDCMSMATRIX_TOOLTIP;Enable to recover clipped highlights when using LUT-based ICC profiles.
-!TP_ICM_BPC;Black Point Compensation
-!TP_ICM_DCPILLUMINANT;Illuminant
-!TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
-!TP_ICM_DCPILLUMINANT_TOOLTIP;Select which embedded DCP illuminant to employ. Default is "interpolated" which is a mix between the two based on white balance. The setting is only available if a dual-illuminant DCP with interpolation support is selected.
-!TP_ICM_INPUTCAMERAICC;Auto-matched camera profile
-!TP_ICM_INPUTCAMERAICC_TOOLTIP;Use RawTherapee's camera-specific DCP or ICC input color profiles. These profiles are more precise than simpler matrix ones. They are not available for all cameras. These profiles are stored in the /iccprofiles/input and /dcpprofiles folders and are automatically retrieved based on a file name matching to the exact model name of the camera.
-!TP_ICM_INPUTCAMERA_TOOLTIP;Use a simple color matrix from dcraw, an enhanced RawTherapee version (whichever is available based on camera model) or one embedded in the DNG.
-!TP_ICM_INPUTCUSTOM_TOOLTIP;Select your own DCP/ICC color profile file for the camera.
-!TP_ICM_INPUTEMBEDDED_TOOLTIP;Use color profile embedded in non-raw files.
-!TP_ICM_INPUTNONE;No profile
-!TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases.
-!TP_ICM_PROFILEINTENT;Rendering Intent
-!TP_ICM_SAVEREFERENCE;Save Reference Image
-!TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance
-!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles.
-!TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile.
-!TP_ICM_TONECURVE;Tone curve
-!TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only available if the selected DCP has a tone curve.
-!TP_ICM_WORKING_TRC;Tone response curve:
-!TP_ICM_WORKING_TRC_CUSTOM;Custom
-!TP_ICM_WORKING_TRC_GAMMA;Gamma
-!TP_ICM_WORKING_TRC_NONE;None
-!TP_ICM_WORKING_TRC_SLOPE;Slope
-!TP_ICM_WORKING_TRC_TOOLTIP;Only for built-in profiles.
-!TP_IMPULSEDENOISE_LABEL;Impulse Noise Reduction
-!TP_IMPULSEDENOISE_THRESH;Threshold
-!TP_LABCURVE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_LABCURVE_AVOIDCOLORSHIFT_TOOLTIP;Fit colors into gamut of the working color space and apply Munsell correction.
-!TP_LABCURVE_BRIGHTNESS;Lightness
-!TP_LABCURVE_CHROMATICITY;Chromaticity
-!TP_LABCURVE_CHROMA_TOOLTIP;To apply B&W toning, set Chromaticity to -100.
-!TP_LABCURVE_CONTRAST;Contrast
-!TP_LABCURVE_CURVEEDITOR;Luminance Curve
-!TP_LABCURVE_CURVEEDITOR_A_RANGE1;Green Saturated
-!TP_LABCURVE_CURVEEDITOR_A_RANGE2;Green Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE3;Red Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE4;Red Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE1;Blue Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE2;Blue Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE3;Yellow Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE4;Yellow Saturated
-!TP_LABCURVE_CURVEEDITOR_CC;CC
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE1;Neutral
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE2;Dull
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE3;Pastel
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE4;Saturated
-!TP_LABCURVE_CURVEEDITOR_CC_TOOLTIP;Chromaticity according to chromaticity C=f(C)
-!TP_LABCURVE_CURVEEDITOR_CH;CH
-!TP_LABCURVE_CURVEEDITOR_CH_TOOLTIP;Chromaticity according to hue C=f(H)
-!TP_LABCURVE_CURVEEDITOR_CL;CL
-!TP_LABCURVE_CURVEEDITOR_CL_TOOLTIP;Chromaticity according to luminance C=f(L)
-!TP_LABCURVE_CURVEEDITOR_HH;HH
-!TP_LABCURVE_CURVEEDITOR_HH_TOOLTIP;Hue according to hue H=f(H)
-!TP_LABCURVE_CURVEEDITOR_LC;LC
-!TP_LABCURVE_CURVEEDITOR_LC_TOOLTIP;Luminance according to chromaticity L=f(C)
-!TP_LABCURVE_CURVEEDITOR_LH;LH
-!TP_LABCURVE_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H)
-!TP_LABCURVE_CURVEEDITOR_LL_TOOLTIP;Luminance according to luminance L=f(L)
-!TP_LABCURVE_LABEL;L*a*b* Adjustments
-!TP_LABCURVE_LCREDSK;Restrict LC to red and skin-tones
-!TP_LABCURVE_LCREDSK_TIP;If enabled, the LC Curve affects only red and skin-tones.\nIf disabled, it applies to all tones.
-!TP_LABCURVE_RSTPROTECTION;Red and skin-tones protection
-!TP_LABCURVE_RSTPRO_TOOLTIP;Works on the Chromaticity slider and the CC curve.
-!TP_LENSGEOM_AUTOCROP;Auto-Crop
-!TP_LENSGEOM_FILL;Auto-fill
-!TP_LENSGEOM_LABEL;Lens / Geometry
-!TP_LENSPROFILE_CORRECTION_AUTOMATCH;Automatically selected
-!TP_LENSPROFILE_CORRECTION_LCPFILE;LCP file
-!TP_LENSPROFILE_CORRECTION_MANUAL;Manually selected
-!TP_LENSPROFILE_LABEL;Profiled Lens Correction
-!TP_LENSPROFILE_LENS_WARNING;Warning: the crop factor used for lens profiling is larger than the crop factor of the camera, the results might be wrong.
-!TP_LENSPROFILE_MODE_HEADER;Lens Profile
-!TP_LENSPROFILE_USE_CA;Chromatic aberration
-!TP_LENSPROFILE_USE_GEOMETRIC;Geometric distortion
-!TP_LENSPROFILE_USE_HEADER;Correct
-!TP_LENSPROFILE_USE_VIGNETTING;Vignetting
-!TP_LOCALCONTRAST_AMOUNT;Amount
-!TP_LOCALCONTRAST_DARKNESS;Darkness level
-!TP_LOCALCONTRAST_LABEL;Local Contrast
-!TP_LOCALCONTRAST_LIGHTNESS;Lightness level
-!TP_LOCALCONTRAST_RADIUS;Radius
-!TP_METADATA_EDIT;Apply modifications
-!TP_METADATA_MODE;Metadata copy mode
-!TP_METADATA_STRIP;Strip all metadata
-!TP_METADATA_TUNNEL;Copy unchanged
-!TP_NEUTRAL;Reset
-!TP_NEUTRAL_TIP;Resets exposure sliders to neutral values.\nApplies to the same controls that Auto Levels applies to, regardless of whether you used Auto Levels or not.
-!TP_PCVIGNETTE_FEATHER;Feather
-!TP_PCVIGNETTE_FEATHER_TOOLTIP;Feathering:\n0 = corners only,\n50 = halfway to center,\n100 = to center.
-!TP_PCVIGNETTE_LABEL;Vignette Filter
-!TP_PCVIGNETTE_ROUNDNESS;Roundness
-!TP_PCVIGNETTE_ROUNDNESS_TOOLTIP;Roundness:\n0 = rectangle,\n50 = fitted ellipse,\n100 = circle.
-!TP_PCVIGNETTE_STRENGTH;Strength
-!TP_PCVIGNETTE_STRENGTH_TOOLTIP;Filter strength in stops (reached in corners).
-!TP_PERSPECTIVE_HORIZONTAL;Horizontal
-!TP_PERSPECTIVE_LABEL;Perspective
-!TP_PERSPECTIVE_VERTICAL;Vertical
-!TP_PFCURVE_CURVEEDITOR_CH;Hue
-!TP_PFCURVE_CURVEEDITOR_CH_TOOLTIP;Controls defringe strength by color.\nHigher = more,\nLower = less.
-!TP_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!TP_PREPROCESS_DEADPIXFILT_TOOLTIP;Tries to suppress dead pixels.
-!TP_PREPROCESS_GREENEQUIL;Green equilibration
-!TP_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!TP_PREPROCESS_HOTPIXFILT_TOOLTIP;Tries to suppress hot pixels.
-!TP_PREPROCESS_LABEL;Preprocessing
-!TP_PREPROCESS_LINEDENOISE;Line noise filter
-!TP_PREPROCESS_LINEDENOISE_DIRECTION;Direction
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_BOTH;Both
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_HORIZONTAL;Horizontal
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_PDAF_LINES;Horizontal only on PDAF rows
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_VERTICAL;Vertical
-!TP_PREPROCESS_NO_FOUND;None found
-!TP_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!TP_PRSHARPENING_LABEL;Post-Resize Sharpening
-!TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions.
-!TP_RAWCACORR_AUTO;Auto-correction
-!TP_RAWCACORR_AUTOIT;Iterations
-!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
-!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CABLUE;Blue
-!TP_RAWCACORR_CARED;Red
-!TP_RAWCACORR_CASTR;Strength
-!TP_RAWEXPOS_BLACKS;Black Levels
-!TP_RAWEXPOS_BLACK_0;Green 1 (lead)
-!TP_RAWEXPOS_BLACK_1;Red
-!TP_RAWEXPOS_BLACK_2;Blue
-!TP_RAWEXPOS_BLACK_3;Green 2
-!TP_RAWEXPOS_BLACK_BLUE;Blue
-!TP_RAWEXPOS_BLACK_GREEN;Green
-!TP_RAWEXPOS_BLACK_RED;Red
-!TP_RAWEXPOS_LINEAR;White-point correction
-!TP_RAWEXPOS_RGB;Red, Green, Blue
-!TP_RAWEXPOS_TWOGREEN;Link greens
-!TP_RAW_1PASSMEDIUM;1-pass (Markesteijn)
-!TP_RAW_2PASS;1-pass+fast
-!TP_RAW_3PASSBEST;3-pass (Markesteijn)
-!TP_RAW_4PASS;3-pass+fast
-!TP_RAW_AHD;AHD
-!TP_RAW_AMAZE;AMaZE
-!TP_RAW_AMAZEVNG4;AMaZE+VNG4
-!TP_RAW_BORDER;Border
-!TP_RAW_DCB;DCB
-!TP_RAW_DCBENHANCE;DCB enhancement
-!TP_RAW_DCBITERATIONS;Number of DCB iterations
-!TP_RAW_DCBVNG4;DCB+VNG4
-!TP_RAW_DMETHOD_PROGRESSBAR;%1 demosaicing...
-!TP_RAW_DMETHOD_PROGRESSBAR_REFINE;Demosaicing refinement...
-!TP_RAW_DMETHOD_TOOLTIP;Note: IGV and LMMSE are dedicated to high ISO images to aid in noise reduction without leading to maze patterns, posterization or a washed-out look.\nPixel Shift is for Pentax/Sony Pixel Shift files. It falls back to AMaZE for non-Pixel Shift files.
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST;Auto threshold
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST_TOOLTIP;If the checkbox is checked (recommended), RawTherapee calculates an optimum value based on flat regions in the image.\nIf there is no flat region in the image or the image is too noisy, the value will be set to 0.\nTo set the value manually, uncheck the checkbox first (reasonable values depend on the image).
-!TP_RAW_DUALDEMOSAICCONTRAST;Contrast threshold
-!TP_RAW_EAHD;EAHD
-!TP_RAW_FAST;Fast
-!TP_RAW_HD;Threshold
-!TP_RAW_HD_TOOLTIP;Lower values make hot/dead pixel detection more aggressive, but false positives may lead to artifacts. If you notice any artifacts appearing when enabling the Hot/Dead Pixel Filters, gradually increase the threshold value until they disappear.
-!TP_RAW_HPHD;HPHD
-!TP_RAW_IGV;IGV
-!TP_RAW_IMAGENUM;Sub-image
-!TP_RAW_IMAGENUM_SN;SN mode
-!TP_RAW_IMAGENUM_TOOLTIP;Some raw files consist of several sub-images (Pentax/Sony Pixel Shift, Pentax 3-in-1 HDR, Canon Dual Pixel, Fuji EXR).\n\nWhen using any demosaicing method other than Pixel Shift, this selects which sub-image is used.\n\nWhen using the Pixel Shift demosaicing method on a Pixel Shift raw, all sub-images are used, and this selects which sub-image should be used for moving parts.
-!TP_RAW_LABEL;Demosaicing
-!TP_RAW_LMMSE;LMMSE
-!TP_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!TP_RAW_LMMSE_TOOLTIP;Adds gamma (step 1), median (steps 2-4) and refinement (steps 5-6) to reduce artifacts and improve the signal-to-noise ratio.
-!TP_RAW_MONO;Mono
-!TP_RAW_NONE;None (Shows sensor pattern)
-!TP_RAW_PIXELSHIFT;Pixel Shift
-!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
-!TP_RAW_PIXELSHIFTDMETHOD;Demosaic method for motion
-!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
-!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
-!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
-!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
-!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
-!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
-!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
-!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
-!TP_RAW_PIXELSHIFTMM_OFF;Off
-!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
-!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
-!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
-!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
-!TP_RAW_PIXELSHIFTSIGMA;Blur radius
-!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
-!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
-!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
-!TP_RAW_RCD;RCD
-!TP_RAW_RCDVNG4;RCD+VNG4
-!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
-!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.\n+fast gives less artifacts in flat areas
-!TP_RAW_SENSOR_XTRANS_LABEL;Sensor with X-Trans Matrix
-!TP_RAW_VNG4;VNG4
-!TP_RAW_XTRANS;X-Trans
-!TP_RAW_XTRANSFAST;Fast X-Trans
-!TP_RESIZE_ALLOW_UPSCALING;Allow Upscaling
-!TP_RESIZE_APPLIESTO;Applies to:
-!TP_RESIZE_CROPPEDAREA;Cropped Area
-!TP_RESIZE_FITBOX;Bounding Box
-!TP_RESIZE_FULLIMAGE;Full Image
-!TP_RESIZE_HEIGHT;Height
-!TP_RESIZE_LANCZOS;Lanczos
-!TP_RESIZE_SPECIFY;Specify:
-!TP_RESIZE_WIDTH;Width
-!TP_RETINEX_CONTEDIT_HSL;HSL histogram
-!TP_RETINEX_CONTEDIT_LAB;L*a*b* histogram
-!TP_RETINEX_CONTEDIT_LH;Hue
-!TP_RETINEX_CONTEDIT_MAP;Equalizer
-!TP_RETINEX_CURVEEDITOR_CD;L=f(L)
-!TP_RETINEX_CURVEEDITOR_CD_TOOLTIP;Luminance according to luminance L=f(L)\nCorrect raw data to reduce halos and artifacts.
-!TP_RETINEX_CURVEEDITOR_LH;Strength=f(H)
-!TP_RETINEX_CURVEEDITOR_LH_TOOLTIP;Strength according to hue Strength=f(H)\nThis curve also acts on chroma when using the "Highlight" retinex method.
-!TP_RETINEX_CURVEEDITOR_MAP;L=f(L)
-!TP_RETINEX_CURVEEDITOR_MAP_TOOLTIP;This curve can be applied alone or with a Gaussian mask or wavelet mask.\nBeware of artifacts!
-!TP_RETINEX_EQUAL;Equalizer
-!TP_RETINEX_FREEGAMMA;Free gamma
-!TP_RETINEX_GAIN;Gain
-!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
-!TP_RETINEX_GAINTRANSMISSION;Gain transmission
-!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
-!TP_RETINEX_GAMMA;Gamma
-!TP_RETINEX_GAMMA_FREE;Free
-!TP_RETINEX_GAMMA_HIGH;High
-!TP_RETINEX_GAMMA_LOW;Low
-!TP_RETINEX_GAMMA_MID;Middle
-!TP_RETINEX_GAMMA_NONE;None
-!TP_RETINEX_GAMMA_TOOLTIP;Restore tones by applying gamma before and after Retinex. Different from Retinex curves or others curves (Lab, Exposure, etc.).
-!TP_RETINEX_GRAD;Transmission gradient
-!TP_RETINEX_GRADS;Strength gradient
-!TP_RETINEX_GRADS_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Strength is reduced when iterations increase, and conversely.
-!TP_RETINEX_GRAD_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Variance and Threshold are reduced when iterations increase, and conversely.
-!TP_RETINEX_HIGH;High
-!TP_RETINEX_HIGHLIG;Highlight
-!TP_RETINEX_HIGHLIGHT;Highlight threshold
-!TP_RETINEX_HIGHLIGHT_TOOLTIP;Increase action of High algorithm.\nMay require you to re-adjust "Neighboring pixels" and to increase the "White-point correction" in the Raw tab -> Raw White Points tool.
-!TP_RETINEX_HSLSPACE_LIN;HSL-Linear
-!TP_RETINEX_HSLSPACE_LOG;HSL-Logarithmic
-!TP_RETINEX_ITER;Iterations (Tone-mapping)
-!TP_RETINEX_ITERF;Tone mapping
-!TP_RETINEX_ITER_TOOLTIP;Simulate a tone-mapping operator.\nHigh values increase the processing time.
-!TP_RETINEX_LABEL;Retinex
-!TP_RETINEX_LABEL_MASK;Mask
-!TP_RETINEX_LABSPACE;L*a*b*
-!TP_RETINEX_LOW;Low
-!TP_RETINEX_MAP;Method
-!TP_RETINEX_MAP_GAUS;Gaussian mask
-!TP_RETINEX_MAP_MAPP;Sharp mask (wavelet partial)
-!TP_RETINEX_MAP_MAPT;Sharp mask (wavelet total)
-!TP_RETINEX_MAP_METHOD_TOOLTIP;Use the mask generated by the Gaussian function above (Radius, Method) to reduce halos and artifacts.\n\nCurve only: apply a diagonal contrast curve on the mask.\nBeware of artifacts!\n\nGaussian mask: generate and use a Gaussian blur of the original mask.\nQuick.\n\nSharp mask: generate and use a wavelet on the original mask.\nSlow.
-!TP_RETINEX_MAP_NONE;None
-!TP_RETINEX_MEDIAN;Transmission median filter
-!TP_RETINEX_METHOD;Method
-!TP_RETINEX_METHOD_TOOLTIP;Low = Reinforce low light.\nUniform = Equalize action.\nHigh = Reinforce high light.\nHighlights = Remove magenta in highlights.
-!TP_RETINEX_MLABEL;Restored haze-free Min=%1 Max=%2
-!TP_RETINEX_MLABEL_TOOLTIP;Should be near min=0 max=32768\nRestored image with no mixture.
-!TP_RETINEX_NEIGHBOR;Radius
-!TP_RETINEX_NEUTRAL;Reset
-!TP_RETINEX_NEUTRAL_TIP;Reset all sliders and curves to their default values.
-!TP_RETINEX_OFFSET;Offset (brightness)
-!TP_RETINEX_SCALES;Gaussian gradient
-!TP_RETINEX_SCALES_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Scale and radius are reduced when iterations increase, and conversely.
-!TP_RETINEX_SETTINGS;Settings
-!TP_RETINEX_SKAL;Scale
-!TP_RETINEX_SLOPE;Free gamma slope
-!TP_RETINEX_STRENGTH;Strength
-!TP_RETINEX_THRESHOLD;Threshold
-!TP_RETINEX_THRESHOLD_TOOLTIP;Limits in/out.\nIn = image source,\nOut = image gauss.
-!TP_RETINEX_TLABEL;TM Min=%1 Max=%2 Mean=%3 Sigma=%4
-!TP_RETINEX_TLABEL2;TM Tm=%1 TM=%2
-!TP_RETINEX_TLABEL_TOOLTIP;Transmission map result.\nMin and Max are used by Variance.\nMean and Sigma.\nTm=Min TM=Max of transmission map.
-!TP_RETINEX_TRANF;Transmission
-!TP_RETINEX_TRANSMISSION;Transmission map
-!TP_RETINEX_TRANSMISSION_TOOLTIP;Transmission according to transmission.\nAbscissa: transmission from negative values (min), mean, and positives values (max).\nOrdinate: amplification or reduction.
-!TP_RETINEX_UNIFORM;Uniform
-!TP_RETINEX_VARIANCE;Contrast
-!TP_RETINEX_VARIANCE_TOOLTIP;Low variance increase local contrast and saturation, but can lead to artifacts.
-!TP_RETINEX_VIEW;Process
-!TP_RETINEX_VIEW_MASK;Mask
-!TP_RETINEX_VIEW_METHOD_TOOLTIP;Standard - Normal display.\nMask - Displays the mask.\nUnsharp mask - Displays the image with a high radius unsharp mask.\nTransmission - Auto/Fixed - Displays the file transmission-map, before any action on contrast and brightness.\n\nAttention: the mask does not correspond to reality, but is amplified to make it more visible.
-!TP_RETINEX_VIEW_NONE;Standard
-!TP_RETINEX_VIEW_TRAN;Transmission - Auto
-!TP_RETINEX_VIEW_TRAN2;Transmission - Fixed
-!TP_RETINEX_VIEW_UNSHARP;Unsharp mask
-!TP_RGBCURVES_BLUE;B
-!TP_RGBCURVES_CHANNEL;Channel
-!TP_RGBCURVES_GREEN;G
-!TP_RGBCURVES_LABEL;RGB Curves
-!TP_RGBCURVES_LUMAMODE;Luminosity mode
-!TP_RGBCURVES_LUMAMODE_TOOLTIP;Luminosity mode allows to vary the contribution of R, G and B channels to the luminosity of the image, without altering image color.
-!TP_RGBCURVES_RED;R
-!TP_SAVEDIALOG_OK_TIP;Shortcut: Ctrl-Enter
-!TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
-!TP_SHARPENEDGE_AMOUNT;Quantity
-!TP_SHARPENEDGE_LABEL;Edges
-!TP_SHARPENEDGE_PASSES;Iterations
-!TP_SHARPENEDGE_THREE;Luminance only
-!TP_SHARPENING_BLUR;Blur radius
-!TP_SHARPENING_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_AMOUNT;Quantity
-!TP_SHARPENMICRO_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_LABEL;Microcontrast
-!TP_SHARPENMICRO_MATRIX;3×3 matrix instead of 5×5
-!TP_SHARPENMICRO_UNIFORMITY;Uniformity
-!TP_SOFTLIGHT_LABEL;Soft Light
-!TP_SOFTLIGHT_STRENGTH;Strength
-!TP_TM_FATTAL_AMOUNT;Amount
-!TP_TM_FATTAL_ANCHOR;Anchor
-!TP_TM_FATTAL_LABEL;Dynamic Range Compression
-!TP_TM_FATTAL_THRESHOLD;Detail
-!TP_VIBRANCE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES;HH
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_LABEL;Skin-tones
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE1;Red/Purple
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE2;Red
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE3;Red/Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE4;Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_TOOLTIP;Hue according to hue H=f(H)
-!TP_VIBRANCE_LABEL;Vibrance
-!TP_VIBRANCE_PASTELS;Pastel Tones
-!TP_VIBRANCE_PASTSATTOG;Link pastel and saturated tones
-!TP_VIBRANCE_PROTECTSKINS;Protect skin-tones
-!TP_VIBRANCE_PSTHRESHOLD;Pastel/saturated tones threshold
-!TP_VIBRANCE_PSTHRESHOLD_SATTHRESH;Saturation threshold
-!TP_VIBRANCE_PSTHRESHOLD_TOOLTIP;The vertical axis represents pastel tones at the bottom and saturated tones at the top.\nThe horizontal axis represents the saturation range.
-!TP_VIBRANCE_PSTHRESHOLD_WEIGTHING;Pastel/saturated transition's weighting
-!TP_VIBRANCE_SATURATED;Saturated Tones
-!TP_VIGNETTING_CENTER;Center
-!TP_VIGNETTING_CENTER_X;Center X
-!TP_VIGNETTING_CENTER_Y;Center Y
-!TP_VIGNETTING_STRENGTH;Strength
-!TP_WAVELET_1;Level 1
-!TP_WAVELET_2;Level 2
-!TP_WAVELET_3;Level 3
-!TP_WAVELET_4;Level 4
-!TP_WAVELET_5;Level 5
-!TP_WAVELET_6;Level 6
-!TP_WAVELET_7;Level 7
-!TP_WAVELET_8;Level 8
-!TP_WAVELET_9;Level 9
-!TP_WAVELET_APPLYTO;Apply To
-!TP_WAVELET_AVOID;Avoid color shift
-!TP_WAVELET_B0;Black
-!TP_WAVELET_B1;Grey
-!TP_WAVELET_B2;Residual
-!TP_WAVELET_BACKGROUND;Background
-!TP_WAVELET_BACUR;Curve
-!TP_WAVELET_BALANCE;Contrast balance d/v-h
-!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified.
-!TP_WAVELET_BALCHRO;Chroma balance
-!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance.
-!TP_WAVELET_BANONE;None
-!TP_WAVELET_BASLI;Slider
-!TP_WAVELET_BATYPE;Contrast balance method
-!TP_WAVELET_CBENAB;Toning and Color Balance
-!TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted
-!TP_WAVELET_CCURVE;Local contrast
-!TP_WAVELET_CH1;Whole chroma range
-!TP_WAVELET_CH2;Saturated/pastel
-!TP_WAVELET_CH3;Link contrast levels
-!TP_WAVELET_CHCU;Curve
-!TP_WAVELET_CHR;Chroma-contrast link strength
-!TP_WAVELET_CHRO;Saturated/pastel threshold
-!TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored.
-!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength"
-!TP_WAVELET_CHSL;Sliders
-!TP_WAVELET_CHTYPE;Chrominance method
-!TP_WAVELET_COLORT;Opacity Red-Green
-!TP_WAVELET_COMPCONT;Contrast
-!TP_WAVELET_COMPGAMMA;Compression gamma
-!TP_WAVELET_COMPGAMMA_TOOLTIP;Adjusting the gamma of the residual image allows you to equilibrate the data and histogram.
-!TP_WAVELET_COMPTM;Tone mapping
-!TP_WAVELET_CONTEDIT;'After' contrast curve
-!TP_WAVELET_CONTR;Gamut
-!TP_WAVELET_CONTRA;Contrast
-!TP_WAVELET_CONTRAST_MINUS;Contrast -
-!TP_WAVELET_CONTRAST_PLUS;Contrast +
-!TP_WAVELET_CONTRA_TOOLTIP;Changes contrast of the residual image.
-!TP_WAVELET_CTYPE;Chrominance control
-!TP_WAVELET_CURVEEDITOR_CC_TOOLTIP;Modifies local contrast as a function of the original local contrast (abscissa).\nLow abscissa values represent small local contrast (real values about 10..20).\n50% abscissa represents average local contrast (real value about 100..300).\n66% abscissa represents standard deviation of local contrast (real value about 300..800).\n100% abscissa represents maximum local contrast (real value about 3000..8000).
-!TP_WAVELET_CURVEEDITOR_CH;Contrast levels=f(Hue)
-!TP_WAVELET_CURVEEDITOR_CH_TOOLTIP;Modifies each level's contrast as a function of hue.\nTake care not to overwrite changes made with the Gamut sub-tool's hue controls.\nThe curve will only have an effect when wavelet contrast level sliders are non-zero.
-!TP_WAVELET_CURVEEDITOR_CL;L
-!TP_WAVELET_CURVEEDITOR_CL_TOOLTIP;Applies a final contrast luminance curve at the end of the wavelet treatment.
-!TP_WAVELET_CURVEEDITOR_HH;HH
-!TP_WAVELET_CURVEEDITOR_HH_TOOLTIP;Modifies the residual image's hue as a function of hue.
-!TP_WAVELET_DALL;All directions
-!TP_WAVELET_DAUB;Edge performance
-!TP_WAVELET_DAUB2;D2 - low
-!TP_WAVELET_DAUB4;D4 - standard
-!TP_WAVELET_DAUB6;D6 - standard plus
-!TP_WAVELET_DAUB10;D10 - medium
-!TP_WAVELET_DAUB14;D14 - high
-!TP_WAVELET_DAUB_TOOLTIP;Changes Daubechies coefficients:\nD4 = Standard,\nD14 = Often best performance, 10% more time-intensive.\n\nAffects edge detection as well as the general quality of the firsts levels. However the quality is not strictly related to this coefficient and can vary with images and uses.
-!TP_WAVELET_DONE;Vertical
-!TP_WAVELET_DTHR;Diagonal
-!TP_WAVELET_DTWO;Horizontal
-!TP_WAVELET_EDCU;Curve
-!TP_WAVELET_EDGCONT;Local contrast
-!TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, top-left, top-right and bottom-right represent respectively local contrast for low values, mean, mean+stdev and maxima.
-!TP_WAVELET_EDGE;Edge Sharpness
-!TP_WAVELET_EDGEAMPLI;Base amplification
-!TP_WAVELET_EDGEDETECT;Gradient sensitivity
-!TP_WAVELET_EDGEDETECTTHR;Threshold low (noise)
-!TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection)
-!TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky.
-!TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise.
-!TP_WAVELET_EDGESENSI;Edge sensitivity
-!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
-!TP_WAVELET_EDGTHRESH;Detail
-!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
-!TP_WAVELET_EDRAD;Radius
-!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
-!TP_WAVELET_EDSL;Threshold Sliders
-!TP_WAVELET_EDTYPE;Local contrast method
-!TP_WAVELET_EDVAL;Strength
-!TP_WAVELET_FINAL;Final Touchup
-!TP_WAVELET_FINEST;Finest
-!TP_WAVELET_HIGHLIGHT;Highlight luminance range
-!TP_WAVELET_HS1;Whole luminance range
-!TP_WAVELET_HS2;Shadows/Highlights
-!TP_WAVELET_HUESKIN;Skin hue
-!TP_WAVELET_HUESKIN_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_HUESKY;Sky hue
-!TP_WAVELET_HUESKY_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_ITER;Delta balance levels
-!TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels.
-!TP_WAVELET_LABEL;Wavelet Levels
-!TP_WAVELET_LARGEST;Coarsest
-!TP_WAVELET_LEVCH;Chroma
-!TP_WAVELET_LEVDIR_ALL;All levels in all directions
-!TP_WAVELET_LEVDIR_INF;Below or equal the level
-!TP_WAVELET_LEVDIR_ONE;One level
-!TP_WAVELET_LEVDIR_SUP;Above the level
-!TP_WAVELET_LEVELS;Wavelet levels
-!TP_WAVELET_LEVELS_TOOLTIP;Choose the number of detail levels the image is to be decomposed into. More levels require more RAM and require a longer processing time.
-!TP_WAVELET_LEVF;Contrast
-!TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1
-!TP_WAVELET_LEVONE;Level 2
-!TP_WAVELET_LEVTHRE;Level 4
-!TP_WAVELET_LEVTWO;Level 3
-!TP_WAVELET_LEVZERO;Level 1
-!TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength
-!TP_WAVELET_LIPST;Enhanced algoritm
-!TP_WAVELET_LOWLIGHT;Shadow luminance range
-!TP_WAVELET_MEDGREINF;First level
-!TP_WAVELET_MEDI;Reduce artifacts in blue sky
-!TP_WAVELET_MEDILEV;Edge detection
-!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine.
-!TP_WAVELET_NEUTRAL;Neutral
-!TP_WAVELET_NOIS;Denoise
-!TP_WAVELET_NOISE;Denoise and Refine
-!TP_WAVELET_NPHIGH;High
-!TP_WAVELET_NPLOW;Low
-!TP_WAVELET_NPNONE;None
-!TP_WAVELET_NPTYPE;Neighboring pixels
-!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced.
-!TP_WAVELET_OPACITY;Opacity Blue-Yellow
-!TP_WAVELET_OPACITYW;Contrast balance d/v-h curve
-!TP_WAVELET_OPACITYWL;Final local contrast
-!TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right.
-!TP_WAVELET_PASTEL;Pastel chroma
-!TP_WAVELET_PROC;Process
-!TP_WAVELET_RE1;Reinforced
-!TP_WAVELET_RE2;Unchanged
-!TP_WAVELET_RE3;Reduced
-!TP_WAVELET_RESCHRO;Chroma
-!TP_WAVELET_RESCON;Shadows
-!TP_WAVELET_RESCONH;Highlights
-!TP_WAVELET_RESID;Residual Image
-!TP_WAVELET_SAT;Saturated chroma
-!TP_WAVELET_SETTINGS;Wavelet Settings
-!TP_WAVELET_SKIN;Skin targetting/protection
-!TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_WAVELET_SKY;Sky targetting/protection
-!TP_WAVELET_SKY_TOOLTIP;At -100 sky-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 sky-tones are protected while all other tones are affected.
-!TP_WAVELET_STREN;Strength
-!TP_WAVELET_STRENGTH;Strength
-!TP_WAVELET_SUPE;Extra
-!TP_WAVELET_THR;Shadows threshold
-!TP_WAVELET_THRESHOLD;Highlight levels
-!TP_WAVELET_THRESHOLD2;Shadow levels
-!TP_WAVELET_THRESHOLD2_TOOLTIP;Only levels between 9 and 9 minus the value will be affected by the shadow luminance range. Other levels will be fully treated. The highest level possible is limited by the highlight level value (9 minus highlight level value).
-!TP_WAVELET_THRESHOLD_TOOLTIP;Only levels beyond the chosen value will be affected by the highlight luminance range. Other levels will be fully treated. The chosen value here limits the highest possible value of the shadow levels.
-!TP_WAVELET_THRH;Highlights threshold
-!TP_WAVELET_TILESBIG;Big tiles
-!TP_WAVELET_TILESFULL;Full image
-!TP_WAVELET_TILESIZE;Tiling method
-!TP_WAVELET_TILESLIT;Little tiles
-!TP_WAVELET_TILES_TOOLTIP;Processing the full image leads to better quality and is the recommended option, while using tiles is a fall-back solution for users with little RAM. Refer to RawPedia for memory requirements.
-!TP_WAVELET_TMSTRENGTH;Compression strength
-!TP_WAVELET_TMSTRENGTH_TOOLTIP;Control the strength of tone mapping or contrast compression of the residual image. When the value is different from 0, the Strength and Gamma sliders of the Tone Mapping tool in the Exposure tab will become grayed out.
-!TP_WAVELET_TMTYPE;Compression method
-!TP_WAVELET_TON;Toning
-!TP_WBALANCE_CLOUDY;Cloudy
-!TP_WBALANCE_DAYLIGHT;Daylight (sunny)
-!TP_WBALANCE_EQBLUERED;Blue/Red equalizer
-!TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behavior of "white balance" by modulating the blue/red balance.\nThis can be useful when shooting conditions:\na) are far from the standard illuminant (e.g. underwater),\nb) are far from conditions where calibrations were performed,\nc) where the matrices or ICC profiles are unsuitable.
-!TP_WBALANCE_FLASH55;Leica
-!TP_WBALANCE_FLASH60;Standard, Canon, Pentax, Olympus
-!TP_WBALANCE_FLASH65;Nikon, Panasonic, Sony, Minolta
-!TP_WBALANCE_FLASH_HEADER;Flash
-!TP_WBALANCE_FLUO1;F1 - Daylight
-!TP_WBALANCE_FLUO2;F2 - Cool White
-!TP_WBALANCE_FLUO3;F3 - White
-!TP_WBALANCE_FLUO4;F4 - Warm White
-!TP_WBALANCE_FLUO5;F5 - Daylight
-!TP_WBALANCE_FLUO6;F6 - Lite White
-!TP_WBALANCE_FLUO7;F7 - D65 Daylight Simulator
-!TP_WBALANCE_FLUO8;F8 - D50 / Sylvania F40 Design
-!TP_WBALANCE_FLUO9;F9 - Cool White Deluxe
-!TP_WBALANCE_FLUO10;F10 - Philips TL85
-!TP_WBALANCE_FLUO11;F11 - Philips TL84
-!TP_WBALANCE_FLUO12;F12 - Philips TL83
-!TP_WBALANCE_FLUO_HEADER;Fluorescent
-!TP_WBALANCE_GTI;GTI
-!TP_WBALANCE_HMI;HMI
-!TP_WBALANCE_JUDGEIII;JudgeIII
-!TP_WBALANCE_LAMP_HEADER;Lamp
-!TP_WBALANCE_LED_CRS;CRS SP12 WWMR16
-!TP_WBALANCE_LED_HEADER;LED
-!TP_WBALANCE_LED_LSI;LSI Lumelex 2040
-!TP_WBALANCE_PICKER;Pick
-!TP_WBALANCE_SHADE;Shade
-!TP_WBALANCE_SOLUX35;Solux 3500K
-!TP_WBALANCE_SOLUX41;Solux 4100K
-!TP_WBALANCE_SOLUX47;Solux 4700K (vendor)
-!TP_WBALANCE_SOLUX47_NG;Solux 4700K (Nat. Gallery)
-!TP_WBALANCE_TEMPBIAS;AWB temperature bias
-!TP_WBALANCE_TEMPBIAS_TOOLTIP;Allows to alter the computation of the "auto white balance"\nby biasing it towards warmer or cooler temperatures. The bias\nis expressed as a percentage of the computed temperature,\nso that the result is given by "computedTemp + computedTemp * bias".
-!TP_WBALANCE_TUNGSTEN;Tungsten
-!TP_WBALANCE_WATER1;UnderWater 1
-!TP_WBALANCE_WATER2;UnderWater 2
-!TP_WBALANCE_WATER_HEADER;UnderWater
-!ZOOMPANEL_100;(100%)
-!ZOOMPANEL_NEWCROPWINDOW;Open (new) detail window
-!ZOOMPANEL_ZOOM100;Zoom to 100%\nShortcut: z
-!ZOOMPANEL_ZOOMFITCROPSCREEN;Fit crop to screen\nShortcut: f
-!ZOOMPANEL_ZOOMFITSCREEN;Fit whole image to screen\nShortcut: Alt-f
-!ZOOMPANEL_ZOOMIN;Zoom In\nShortcut: +
-!ZOOMPANEL_ZOOMOUT;Zoom Out\nShortcut: -
diff --git a/rtdata/languages/Hebrew b/rtdata/languages/Hebrew
deleted file mode 100644
index c8145d921..000000000
--- a/rtdata/languages/Hebrew
+++ /dev/null
@@ -1,2329 +0,0 @@
-#01 2008-02-21
-
-CURVEEDITOR_LINEAR;ישיר
-CURVEEDITOR_LOADDLGLABEL;הטען עקמה
-CURVEEDITOR_SAVEDLGLABEL;שמור עקמה
-CURVEEDITOR_TOOLTIPLINEAR;החזר עקמה לישירה
-CURVEEDITOR_TOOLTIPLOAD;הטען עקמה
-CURVEEDITOR_TOOLTIPSAVE;שמור עקמה נוכחית
-DIRBROWSER_FOLDERS;תיקיות
-EXIFFILTER_APERTURE;Aperture
-EXIFFILTER_CAMERA;Camera
-EXIFFILTER_FOCALLEN;Focal Length
-EXIFFILTER_ISO;ISO
-EXIFFILTER_LENS;Lens
-EXIFFILTER_SHUTTER;Shutter
-EXIFPANEL_ADDEDIT;Add/Edit
-EXIFPANEL_ADDEDITHINT;Add new tag or edit tag
-EXIFPANEL_ADDTAGDLG_ENTERVALUE;Enter value
-EXIFPANEL_ADDTAGDLG_SELECTTAG;Select tag
-EXIFPANEL_ADDTAGDLG_TITLE;Add/Edit Tag
-EXIFPANEL_KEEP;Keep
-EXIFPANEL_KEEPHINT;Keep the selected tags when writing output file
-EXIFPANEL_REMOVE;Remove
-EXIFPANEL_REMOVEHINT;Remove the selected tags when writing output file
-EXIFPANEL_RESET;Reset
-EXIFPANEL_RESETALL;Reset All
-EXIFPANEL_RESETALLHINT;Reset all tags to their original values
-EXIFPANEL_RESETHINT;Reset the selected tags to their original values
-EXIFPANEL_SUBDIRECTORY;Subdirectory
-FILEBROWSER_APPLYPROFILE;Apply profile
-FILEBROWSER_CLEARPROFILE;Clear profile
-FILEBROWSER_COPYPROFILE;Copy profile
-FILEBROWSER_DELETEDLGLABEL;File delete confirmation
-FILEBROWSER_DELETEDLGMSG;Are you sure you want to delete the selected %1 files?
-FILEBROWSER_EMPTYTRASH;Empty Trash
-FILEBROWSER_EMPTYTRASHHINT;Permanently delete the files of the trash
-FILEBROWSER_PARTIALPASTEPROFILE;Partial paste
-FILEBROWSER_PASTEPROFILE;Paste profile
-FILEBROWSER_POPUPCANCELJOB;Cancel job
-FILEBROWSER_POPUPMOVEEND;Move to end of queue
-FILEBROWSER_POPUPMOVEHEAD;Move to head of queue
-FILEBROWSER_POPUPOPEN;Open
-FILEBROWSER_POPUPOPENINEDITOR;Open in Editor
-FILEBROWSER_POPUPPROCESS;Put to processing queue
-FILEBROWSER_POPUPREMOVE;Remove from filesystem
-FILEBROWSER_POPUPRENAME;Rename
-FILEBROWSER_POPUPSELECTALL;Select all
-FILEBROWSER_POPUPTRASH;Move to trash
-FILEBROWSER_POPUPUNRANK;Unrank
-FILEBROWSER_POPUPUNTRASH;Remove from trash
-FILEBROWSER_RENAMEDLGLABEL;Rename file
-FILEBROWSER_SHOWDIRHINT;Show all images of the directory
-FILEBROWSER_SHOWRANK1HINT;Show images ranked as 1 star
-FILEBROWSER_SHOWRANK2HINT;Show images ranked as 2 star
-FILEBROWSER_SHOWRANK3HINT;Show images ranked as 3 star
-FILEBROWSER_SHOWRANK4HINT;Show images ranked as 4 star
-FILEBROWSER_SHOWRANK5HINT;Show images ranked as 5 star
-FILEBROWSER_SHOWTRASHHINT;Show content of the trash
-FILEBROWSER_SHOWUNRANKHINT;Show unranked images
-FILEBROWSER_THUMBSIZE;Thumb. size
-FILEBROWSER_ZOOMINHINT;Increase thumbnail size
-FILEBROWSER_ZOOMOUTHINT;Decrease thumbnail size
-GENERAL_ABOUT;אודות
-GENERAL_CANCEL;בטל
-GENERAL_DISABLE;בטל
-GENERAL_DISABLED;מבוטל
-GENERAL_ENABLE;הפעל
-GENERAL_ENABLED;מופעל
-GENERAL_LANDSCAPE;נוף
-GENERAL_NA;אין
-GENERAL_NO;לא
-GENERAL_OK;שמור
-GENERAL_PORTRAIT;דיוקן
-GENERAL_SAVE;שמור
-HISTOGRAM_TOOLTIP_B;Show/הסתר היסטוגרם כחול
-HISTOGRAM_TOOLTIP_G;Show/הסתר היסטוגרם ירוק
-HISTOGRAM_TOOLTIP_L;Show/CIELAB הסתר היסטוגרם
-HISTOGRAM_TOOLTIP_R;Show/הסתר היסטוגרם אדום
-HISTORY_CHANGED;Changed
-HISTORY_CUSTOMCURVE;עקמה מותאמת
-HISTORY_FROMCLIPBOARD;From clipboard
-HISTORY_LABEL;היסטוריה
-HISTORY_MSG_1;צילום טעון
-HISTORY_MSG_2;פרופיל טעון
-HISTORY_MSG_3;פרופיל הוחלף
-HISTORY_MSG_4;דיפדוף בהיסטוריה
-HISTORY_MSG_5;בהירות
-HISTORY_MSG_6;ניגודיות
-HISTORY_MSG_7;שחור
-HISTORY_MSG_8;פיצוי חשיפה
-HISTORY_MSG_9;דחיסת גוונים בהירים
-HISTORY_MSG_10;דחיסת גוונים כהים
-HISTORY_MSG_11;עקמת גוונים
-HISTORY_MSG_12;חשיפה אוטומטית
-HISTORY_MSG_13;קיצוץ החסיפה
-HISTORY_MSG_14;הארה - בהירות
-HISTORY_MSG_15;הארה - ניגודיות
-HISTORY_MSG_16;הארה - שחור
-HISTORY_MSG_17;הארה - דחיסת גוונים בהירים
-HISTORY_MSG_18;הארה - דחיסת גוונים כהים
-HISTORY_MSG_19;הארה - עקמה
-HISTORY_MSG_20;חידוד
-HISTORY_MSG_21;חידוד - רדיוס
-HISTORY_MSG_22;חידוד - כמות
-HISTORY_MSG_23;חידוד - סף
-HISTORY_MSG_24;חידוד - רק קצוות
-HISTORY_MSG_25;חידוד - רדיוס גילוי קצוות
-HISTORY_MSG_26;חידוד - סבילות קצוות
-HISTORY_MSG_27;חידוד - בקרת הילה
-HISTORY_MSG_28;בקרת הילה, כמות
-HISTORY_MSG_29;שיטת החידוד
-HISTORY_MSG_30;דיקונבולוציה - רדיוס
-HISTORY_MSG_31;גיקונבולוציה - כמות
-HISTORY_MSG_32;גיקונבולוציה - ריסון
-HISTORY_MSG_33;גיקונבולוציה - חזרות
-HISTORY_MSG_34;המנע מקיצוץ צבע
-HISTORY_MSG_35;הגבלת רויה
-HISTORY_MSG_36;גבול רויה
-HISTORY_MSG_37;הגברת צבע
-HISTORY_MSG_38;שיטת איזון לבן
-HISTORY_MSG_39;מידת חום
-HISTORY_MSG_40;גיוון איזון צבע
-HISTORY_MSG_41;העברת צבע א
-HISTORY_MSG_42;העברת צבע ב
-HISTORY_MSG_43;הסרת רעש בהירות
-HISTORY_MSG_44;הסרת רעש בהירות רדיוס
-HISTORY_MSG_45;הסרת רעש בהירות סבילות קצוות
-HISTORY_MSG_46;הסרת רעש צבעוני
-HISTORY_MSG_47;הסרת רעש צבעוני רדיוס
-HISTORY_MSG_48;הסרת רעש צבעוני סבילות קצוות
-HISTORY_MSG_49;הסרת רעש צבעוני רגישות לקצוות
-HISTORY_MSG_50;כלי בהירים\כהים
-HISTORY_MSG_51;הגברת גוונים בהירים
-HISTORY_MSG_52;ההגברת גוונים כהים
-HISTORY_MSG_53;בהירים, רוחב גוונים
-HISTORY_MSG_54;כהים, רוחב גוונים
-HISTORY_MSG_55;ניגודיות מקומית
-HISTORY_MSG_56;בהירים\כהים רדיוס
-HISTORY_MSG_57;סיבוב גס
-HISTORY_MSG_58;היפוך אופקי
-HISTORY_MSG_59;היפוך אנכי
-HISTORY_MSG_60;סיבוב
-HISTORY_MSG_61;סיבוב
-HISTORY_MSG_62;תיקון עיוות בעדשה
-HISTORY_MSG_63;סימניה נבחרה
-HISTORY_MSG_64;גזירת תצלום
-HISTORY_MSG_65;C/A תיקון עיוות
-HISTORY_MSG_66;שחזור גוונים בהירים
-HISTORY_MSG_67;שחזור גוונים בהירים, כמות
-HISTORY_MSG_68;שחזור גוונים בהירים, שיטה
-HISTORY_MSG_69;מרחב צבע עבודה
-HISTORY_MSG_70;מרחב צבע ייצוא
-HISTORY_MSG_71;מרחב צבע ייבוא
-HISTORY_MSG_72;תיקון פינות כהות
-HISTORY_MSG_73;מערבב ערוצים
-HISTORY_MSG_74;מידת שינוי גודל
-HISTORY_MSG_75;שיטת שינוי גודל
-HISTORY_MSG_76;Exif Metadata
-HISTORY_MSG_77;IPTC Metadata
-HISTORY_MSG_78;Data specified for resize
-HISTORY_MSG_79;Resize width
-HISTORY_MSG_80;Resize height
-HISTORY_MSG_81;Resize enabled
-HISTORY_NEWSNAPSHOT;תצלום חדש
-HISTORY_SNAPSHOT;תצלום
-HISTORY_SNAPSHOTS;תצלומים
-IPTCPANEL_CATEGORY;Category
-IPTCPANEL_CITY;City
-IPTCPANEL_COPYHINT;Copy IPTC settings to clipboard
-IPTCPANEL_COUNTRY;Country
-IPTCPANEL_CREDIT;Credit
-IPTCPANEL_CREDITHINT;Identifies the provider of the image, not necessarily the owner/creator (Credit).
-IPTCPANEL_DATECREATED;Date Created
-IPTCPANEL_EMBEDDED;Embedded
-IPTCPANEL_EMBEDDEDHINT;Reset to IPTC data embedded in the image file
-IPTCPANEL_HEADLINE;Headline
-IPTCPANEL_INSTRUCTIONS;Instructions
-IPTCPANEL_KEYWORDS;Keywords
-IPTCPANEL_PASTEHINT;Paste IPTC settings from clipboard
-IPTCPANEL_RESET;Reset
-IPTCPANEL_RESETHINT;Reset to profile default
-IPTCPANEL_SOURCE;Source
-IPTCPANEL_TITLE;Title
-MAIN_BUTTON_PREFERENCES;העדפויות
-MAIN_BUTTON_SAVE;שמור צילום
-MAIN_BUTTON_SENDTOEDITOR;Send to editor
-MAIN_FRAME_BATCHQUEUE;Batch Queue
-MAIN_FRAME_FILEBROWSER;File Browser
-MAIN_FRAME_PLACES;Places
-MAIN_FRAME_PLACES_ADD;Add
-MAIN_FRAME_RECENT;Recent Folders
-MAIN_MSG_ALREADYEXISTS;הקובץ כבר קיים
-MAIN_MSG_CANNOTLOAD;לא יכול להעלות את הקובץ
-MAIN_MSG_CANNOTSAVE;טעות בשמירת הקובץ
-MAIN_MSG_CANNOTSTARTEDITOR;Can not start editor.
-MAIN_MSG_CANNOTSTARTEDITOR_SECONDARY;Please set the correct path in the "Preferences" dialog.
-MAIN_MSG_QOVERWRITE;?רצונך לכתוב אותו מחדש?
-MAIN_TAB_COLOR;Color
-MAIN_TAB_DETAIL;Detail
-MAIN_TAB_DEVELOP;Develop
-MAIN_TAB_EXIF;Exif
-MAIN_TAB_EXPOSURE;Exposure
-MAIN_TAB_FILTER;Filter
-MAIN_TAB_IPTC;IPTC
-MAIN_TAB_METADATA;Metadata
-MAIN_TAB_TRANSFORM;התמרות
-MAIN_TOOLTIP_HIDEHP;גלה\הסתר לוח שמאלי - היסטוריה (shortcut key: F)
-MAIN_TOOLTIP_INDCLIPPEDH;סימן לגוונים בהירים מקוצצים
-MAIN_TOOLTIP_INDCLIPPEDS;סימן לגוונים כהים מקוצצים
-MAIN_TOOLTIP_QINFO;מידע מהיר אודות הצילום
-PARTIALPASTE_BASICGROUP;Basic settings
-PARTIALPASTE_CACORRECTION;C/A correction
-PARTIALPASTE_COARSETRANS;90 deg rotation / flipping
-PARTIALPASTE_COLORGROUP;Color related settings
-PARTIALPASTE_COMPOSITIONGROUP;Composition settings
-PARTIALPASTE_CROP;Crop
-PARTIALPASTE_DIALOGLABEL;Partial paste processing profile
-PARTIALPASTE_DISTORTION;Distortion correction
-PARTIALPASTE_EXIFCHANGES;Changes to exif data
-PARTIALPASTE_EXPOSURE;Exposure
-PARTIALPASTE_ICMSETTINGS;ICM settings
-PARTIALPASTE_IPTCINFO;IPTC info
-PARTIALPASTE_LENSGROUP;Lens related settings
-PARTIALPASTE_METAGROUP;Metadata
-PARTIALPASTE_RESIZE;Resize
-PARTIALPASTE_ROTATION;Rotation
-PARTIALPASTE_SHADOWSHIGHLIGHTS;Shadows/Highlights
-PARTIALPASTE_SHARPENING;Sharpening
-PARTIALPASTE_VIGNETTING;Vignetting correction
-PARTIALPASTE_WHITEBALANCE;White balance
-PREFERENCES_APPLNEXTSTARTUP;ייושם באתחול הבא
-PREFERENCES_CACHEMAXENTRIES;Maximal Number of Cache Entries
-PREFERENCES_CACHEOPTS;Cache Options
-PREFERENCES_CACHETHUMBHEIGHT;Maximal Thumbnail Height
-PREFERENCES_CLIPPINGIND;סימון קיצוץ
-PREFERENCES_DATEFORMAT;צורת תאריך
-PREFERENCES_DATEFORMATHINT;You can use the following formatting strings:\n%y : year\n%m : month\n%d : day\n\nFor example, the hungarian date format is:\n%y/%m/%d
-PREFERENCES_DIRHOME;תיקיית הבית
-PREFERENCES_DIRLAST;תיקיה האחרונה שביקרתי בה
-PREFERENCES_DIROTHER;אחר
-PREFERENCES_DIRSELECTDLG;בחר תיקיית צילומים לאתחול
-PREFERENCES_DIRSOFTWARE;תיקיית התקנה
-PREFERENCES_EXTERNALEDITOR;External editor
-PREFERENCES_FBROWSEROPTS;ברירות דפדפן
-PREFERENCES_FILEFORMAT;תצורת קובץ
-PREFERENCES_FORIMAGE;עבור קבצי צילום
-PREFERENCES_FORRAW;RAW עבור קבצי
-PREFERENCES_GIMPPATH;GIMP installation directory
-PREFERENCES_HLTHRESHOLD;סף קיצוץ עליון
-PREFERENCES_ICCDIR;ICC תיקיית פרופילי צבע
-PREFERENCES_IMPROCPARAMS;נתוני עיבוד ברירת המחדל
-PREFERENCES_INTENT_ABSOLUTE;קולורמטרית מוחלטת
-PREFERENCES_INTENT_PERCEPTUAL;תפיסתית
-PREFERENCES_INTENT_RELATIVE;קולורמטרית יחסית
-PREFERENCES_INTENT_SATURATION;רויה
-PREFERENCES_OUTDIR;תיקיית ייצוא
-PREFERENCES_OUTDIRFOLDER;Save to folder
-PREFERENCES_OUTDIRFOLDERHINT;Put the saved images to the seledted folder
-PREFERENCES_OUTDIRTEMPLATE;Use Template
-PREFERENCES_OUTDIRTEMPLATEHINT;You can use the following formatting strings:\n%f, %d1, %d2, ..., %p1, %p2, ...\n\nThese formatting strings refer to the directories and sub-paths of the path of the raw file.\n\nFor example, if /home/tom/image/02-09-2006/dsc0012.nefhas been opened, the meaning of the formatting strings are:\n%f=dsc0012, %d1=02-09-2006, %d2=image, ...\n%p1=/home/tom/image/02-09-2006, %p2=/home/tom/image, p3=/home/tom, ...\n\nIf you want to save the output image where the original is, write:\n%p1/%f\n\nIf you want to save the output image in a directory 'converted' located the directory of the original, write:\n%p1/converted/%f\n\nIf you want to save the output image in directory '/home/tom/converted' with keeping the same subdirectory of dates, write:\n%p2/converted/%d1/%f
-PREFERENCES_PARSEDEXT;Parsed Extensions
-PREFERENCES_PARSEDEXTADD;Add Extension
-PREFERENCES_PARSEDEXTADDHINT;Type an extension and press this button to append list
-PREFERENCES_PARSEDEXTDELHINT;Delete selected extension from the list
-PREFERENCES_PROFILEHANDLING;Processing Profile Handling
-PREFERENCES_PROFILELOADPR;Profile Loading Priority
-PREFERENCES_PROFILEPRCACHE;Profile in Cache
-PREFERENCES_PROFILEPRFILE;Profile Next to the Input File
-PREFERENCES_PROFILESAVECACHE;Save Processing Parameters to the Cache
-PREFERENCES_PROFILESAVEINPUT;Save Processing Parameters Next to the Input File
-PREFERENCES_PSPATH;Adobe Photoshop installation directory
-PREFERENCES_SELECTLANG;בחר שפה
-PREFERENCES_SHOWBASICEXIF;Exif הראה מידע
-PREFERENCES_SHOWDATETIME;הראה תאריך ושעה
-PREFERENCES_SHTHRESHOLD;סף קיצוץ תחתון
-PREFERENCES_STARTUPIMDIR;תיקיית צילומים באתחול
-PREFERENCES_TAB_BROWSER;דפדפן קבצים
-PREFERENCES_TAB_COLORMGR;ניהול צבעים
-PREFERENCES_TAB_GENERAL;כללי
-PREFERENCES_TAB_IMPROC;עיבוד צילום
-PROFILEPANEL_LABEL;פרופילי עיבוד
-PROFILEPANEL_LOADDLGLABEL;הטען נתוני עיבוד
-PROFILEPANEL_PCUSTOM;מותאם
-PROFILEPANEL_PFILE;מקובץ
-PROFILEPANEL_PLASTSAVED;נשמר אחרון
-PROFILEPANEL_SAVEDLGLABEL;שמור נתוני עיבוד
-PROFILEPANEL_TOOLTIPCOPY;Copy current profile to clipboard
-PROFILEPANEL_TOOLTIPLOAD;הטען פרופיל מקובץ
-PROFILEPANEL_TOOLTIPPASTE; Paste profile from clipboard
-PROFILEPANEL_TOOLTIPSAVE;שמור פרופיל נוכחי
-PROGRESSBAR_LOADING;מטעין צילום
-PROGRESSBAR_LOADJPEG;JPG מטעין קובץ
-PROGRESSBAR_LOADPNG;PNG מטעין קובץ
-PROGRESSBAR_LOADTIFF;TIFF מטעין קובץ
-PROGRESSBAR_PROCESSING;מעבד צילום
-PROGRESSBAR_READY;מוכן
-PROGRESSBAR_SAVEJPEG;JPG שומר קובץ
-PROGRESSBAR_SAVEPNG;PNG שומר קובץ
-PROGRESSBAR_SAVETIFF;TIFF שומר קובץ
-QINFO_ISO;ISO
-QINFO_NOEXIF;המידע לא זמין
-SAVEDLG_FILEFORMAT;תצורת קובץ
-SAVEDLG_JPEGQUAL;JPEG איכות
-SAVEDLG_PNGCOMPR;PNG דחיסת
-SAVEDLG_PUTTOQUEUE;Put into processing queue
-SAVEDLG_PUTTOQUEUEHEAD;Put to the head of the processing queue
-SAVEDLG_PUTTOQUEUETAIL;Put to the end of the processing queue
-SAVEDLG_SAVEIMMEDIATELY;Save immediately
-SAVEDLG_SAVESPP;שמור נתוני עיבוד עם הצילום
-TOOLBAR_TOOLTIP_CROP;בחירת גזירה (shortcut key: C)
-TOOLBAR_TOOLTIP_HAND;כלי יד (shortcut key: N)
-TOOLBAR_TOOLTIP_STRAIGHTEN;בחירת קו ישר (shortcut key: S)
-TOOLBAR_TOOLTIP_WB;איזון לבן נקודתי (shortcut key: W)
-TP_CACORRECTION_BLUE;כחול
-TP_CACORRECTION_LABEL;C/A תיקון
-TP_CACORRECTION_RED;אדום
-TP_CHMIXER_BLUE;כחול
-TP_CHMIXER_GREEN;ירוק
-TP_CHMIXER_LABEL;מערבב ערוצים
-TP_CHMIXER_RED;אדום
-TP_COARSETRAF_TOOLTIP_HFLIP;הפוך אופקי
-TP_COARSETRAF_TOOLTIP_ROTLEFT;סובב שמאלה
-TP_COARSETRAF_TOOLTIP_ROTRIGHT;סובב ימינה
-TP_COARSETRAF_TOOLTIP_VFLIP;הפוך אנכי
-TP_CROP_FIXRATIO;קבע יחס
-TP_CROP_GTDIAGONALS;כלל האלכסון
-TP_CROP_GTNONE;ללא
-TP_CROP_GTRULETHIRDS;כלל השליש
-TP_CROP_GUIDETYPE;סוג מדריך
-TP_CROP_H;גובה
-TP_CROP_LABEL;גזור
-TP_CROP_W;רוחב
-TP_CROP_X;x
-TP_CROP_Y;y
-TP_DISTORTION_AMOUNT;כמות
-TP_DISTORTION_LABEL;עיוות
-TP_EXPOSURE_AUTOLEVELS;מפלסים אוטומטים
-TP_EXPOSURE_BLACKLEVEL;שחור
-TP_EXPOSURE_BRIGHTNESS;בהירות
-TP_EXPOSURE_CLIP;קצץ
-TP_EXPOSURE_COMPRHIGHLIGHTS;דחיסת גוונים בהירים
-TP_EXPOSURE_COMPRSHADOWS;דחיסת גוונים כהים
-TP_EXPOSURE_CONTRAST;ניגודיות
-TP_EXPOSURE_CURVEEDITOR;עקמת גוונים
-TP_EXPOSURE_EXPCOMP;פיצוי חשיפה
-TP_EXPOSURE_LABEL;חשיפה
-TP_HLREC_CIELAB;CIELab Blending
-TP_HLREC_COLOR;הפצת צבע
-TP_HLREC_LABEL;שחזור גוונים בהירים
-TP_HLREC_LUMINANCE;שחזור בהירות
-TP_HLREC_METHOD;שיטה
-TP_ICM_INPUTCAMERA;ברירת מחדל המצלמה
-TP_ICM_INPUTCUSTOM;מותאם
-TP_ICM_INPUTDLGLABEL;בחר בפרופיל צבע ייבוא
-TP_ICM_INPUTEMBEDDED;השתמש בפרופיל משובץ,אם אפשר
-TP_ICM_INPUTPROFILE;פרופיל ייבוא
-TP_ICM_LABEL;ניהול צבע
-TP_ICM_NOICM;sRGBללא ניהול צבע - ייצוא ב
-TP_ICM_OUTPUTPROFILE;פרופיל ייצוא
-TP_ICM_WORKINGPROFILE;פרופיל עבודה
-TP_RAW_DMETHOD;שיטה
-TP_RAW_FALSECOLOR;דחיית צבע מסולף
-TP_RESIZE_H;גובה
-TP_RESIZE_LABEL;החלף גודל
-TP_RESIZE_METHOD;שיטה
-TP_RESIZE_NEAREST;הקרוב
-TP_RESIZE_SCALE;מידה
-TP_RESIZE_W;רוחב
-TP_ROTATE_DEGREE;מעלות
-TP_ROTATE_LABEL;סובב
-TP_ROTATE_SELECTLINE;בחור קו ישר
-TP_SHADOWSHLIGHTS_HIGHLIGHTS;גוונים בהירים
-TP_SHADOWSHLIGHTS_HLTONALW;רוחב גוונים
-TP_SHADOWSHLIGHTS_LABEL;בהירים\כהים
-TP_SHADOWSHLIGHTS_LOCALCONTR;ניגודיות מקומית
-TP_SHADOWSHLIGHTS_RADIUS;רדיוס
-TP_SHADOWSHLIGHTS_SHADOWS;גוונים כהים
-TP_SHADOWSHLIGHTS_SHTONALW;רוחב גוונים
-TP_SHARPENING_AMOUNT;כמות
-TP_SHARPENING_EDRADIUS;רדיוס
-TP_SHARPENING_EDTOLERANCE;סבילות לקצוות
-TP_SHARPENING_HALOCONTROL;בקרת הילה
-TP_SHARPENING_HCAMOUNT;כמות
-TP_SHARPENING_LABEL;חידוד
-TP_SHARPENING_METHOD;שיטה
-TP_SHARPENING_ONLYEDGES;חידוד רק בקצוות
-TP_SHARPENING_RADIUS;רדיוס
-TP_SHARPENING_RLD;RL דיקונבולוציה
-TP_SHARPENING_RLD_AMOUNT;כמות
-TP_SHARPENING_RLD_DAMPING;ריסון
-TP_SHARPENING_RLD_ITERATIONS;חזרות
-TP_SHARPENING_THRESHOLD;םף
-TP_SHARPENING_USM;מיסוך אי-חדות
-TP_VIGNETTING_AMOUNT;כמות
-TP_VIGNETTING_LABEL;תיקון פינות כהות
-TP_VIGNETTING_RADIUS;רדיוס
-TP_WBALANCE_AUTO;אוטומטי
-TP_WBALANCE_CAMERA;מצלמה
-TP_WBALANCE_CUSTOM;מותאם
-TP_WBALANCE_GREEN;גיוון
-TP_WBALANCE_LABEL;איזון לבן
-TP_WBALANCE_METHOD;שיטה
-TP_WBALANCE_SIZE;גודל
-TP_WBALANCE_SPOTWB;לפי נקודה
-TP_WBALANCE_TEMPERATURE;מידת חום
-# Hebrew
-
-!!!!!!!!!!!!!!!!!!!!!!!!!
-! Untranslated keys follow; remove the ! prefix after an entry is translated.
-!!!!!!!!!!!!!!!!!!!!!!!!!
-
-!ABOUT_TAB_BUILD;Version
-!ABOUT_TAB_CREDITS;Credits
-!ABOUT_TAB_LICENSE;License
-!ABOUT_TAB_RELEASENOTES;Release Notes
-!ABOUT_TAB_SPLASH;Splash
-!ADJUSTER_RESET_TO_DEFAULT;Click - reset to default value.\nCtrl+click - reset to initial value.
-!BATCHQUEUE_AUTOSTART;Auto-start
-!BATCHQUEUE_AUTOSTARTHINT;Start processing automatically when a new job arrives.
-!BATCHQUEUE_DESTFILENAME;Path and file name
-!BATCHQUEUE_STARTSTOPHINT;Start or stop processing the images in the queue.\n\nShortcut: Ctrl+s
-!BATCH_PROCESSING;Batch Processing
-!CURVEEDITOR_AXIS_IN;I:
-!CURVEEDITOR_AXIS_LEFT_TAN;LT:
-!CURVEEDITOR_AXIS_OUT;O:
-!CURVEEDITOR_AXIS_RIGHT_TAN;RT:
-!CURVEEDITOR_CATMULLROM;Flexible
-!CURVEEDITOR_CURVE;Curve
-!CURVEEDITOR_CURVES;Curves
-!CURVEEDITOR_CUSTOM;Standard
-!CURVEEDITOR_DARKS;Darks
-!CURVEEDITOR_EDITPOINT_HINT;Enable edition of node in/out values.\n\nRight-click on a node to select it.\nRight-click on empty space to de-select the node.
-!CURVEEDITOR_HIGHLIGHTS;Highlights
-!CURVEEDITOR_LIGHTS;Lights
-!CURVEEDITOR_MINMAXCPOINTS;Equalizer
-!CURVEEDITOR_NURBS;Control cage
-!CURVEEDITOR_PARAMETRIC;Parametric
-!CURVEEDITOR_SHADOWS;Shadows
-!CURVEEDITOR_TOOLTIPCOPY;Copy current curve to clipboard.
-!CURVEEDITOR_TOOLTIPPASTE;Paste curve from clipboard.
-!CURVEEDITOR_TYPE;Type:
-!DONT_SHOW_AGAIN;Don't show this message again.
-!DYNPROFILEEDITOR_DELETE;Delete
-!DYNPROFILEEDITOR_EDIT;Edit
-!DYNPROFILEEDITOR_EDIT_RULE;Edit Dynamic Profile Rule
-!DYNPROFILEEDITOR_ENTRY_TOOLTIP;The matching is case insensitive.\nUse the "re:" prefix to enter\na regular expression.
-!DYNPROFILEEDITOR_IMGTYPE_ANY;Any
-!DYNPROFILEEDITOR_IMGTYPE_HDR;HDR
-!DYNPROFILEEDITOR_IMGTYPE_PS;Pixel Shift
-!DYNPROFILEEDITOR_IMGTYPE_STD;Standard
-!DYNPROFILEEDITOR_MOVE_DOWN;Move Down
-!DYNPROFILEEDITOR_MOVE_UP;Move Up
-!DYNPROFILEEDITOR_NEW;New
-!DYNPROFILEEDITOR_NEW_RULE;New Dynamic Profile Rule
-!DYNPROFILEEDITOR_PROFILE;Processing Profile
-!EDITWINDOW_TITLE;Image Edit
-!EDIT_OBJECT_TOOLTIP;Displays a widget on the preview window which lets you adjust this tool.
-!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
-!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
-!EXIFFILTER_FILETYPE;File type
-!EXIFFILTER_IMAGETYPE;Image type
-!EXIFFILTER_METADATAFILTER;Enable metadata filters
-!EXIFPANEL_SHOWALL;Show all
-!EXPORT_BYPASS;Processing steps to bypass
-!EXPORT_BYPASS_ALL;Select / Unselect All
-!EXPORT_BYPASS_DEFRINGE;Bypass Defringe
-!EXPORT_BYPASS_DIRPYRDENOISE;Bypass Noise Reduction
-!EXPORT_BYPASS_DIRPYREQUALIZER;Bypass Contrast by Detail Levels
-!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
-!EXPORT_BYPASS_RAW_CA;Bypass [raw] Chromatic Aberration Correction
-!EXPORT_BYPASS_RAW_CCSTEPS;Bypass [raw] False Color Suppression
-!EXPORT_BYPASS_RAW_DCB_ENHANCE;Bypass [raw] DCB Enhancement Steps
-!EXPORT_BYPASS_RAW_DCB_ITERATIONS;Bypass [raw] DCB Iterations
-!EXPORT_BYPASS_RAW_DF;Bypass [raw] Dark-Frame
-!EXPORT_BYPASS_RAW_FF;Bypass [raw] Flat-Field
-!EXPORT_BYPASS_RAW_GREENTHRESH;Bypass [raw] Green Equilibration
-!EXPORT_BYPASS_RAW_LINENOISE;Bypass [raw] Line Noise Filter
-!EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Bypass [raw] LMMSE Enhancement Steps
-!EXPORT_BYPASS_SHARPENEDGE;Bypass Edge Sharpening
-!EXPORT_BYPASS_SHARPENING;Bypass Sharpening
-!EXPORT_BYPASS_SHARPENMICRO;Bypass Microcontrast
-!EXPORT_BYPASS_SH_HQ;Bypass Sharp Mask Shadows/Highlights
-!EXPORT_FASTEXPORTOPTIONS;Fast Export Options
-!EXPORT_INSTRUCTIONS;Fast Export options provide overrides to bypass time and resource consuming development settings and to run queue processing using the fast export settings instead. This method is recommended for quicker generation of lower resolution images when speed is a priority or when resized output is desired for one or many images without making modifications to their saved development parameters.
-!EXPORT_MAXHEIGHT;Maximum height:
-!EXPORT_MAXWIDTH;Maximum width:
-!EXPORT_PIPELINE;Processing pipeline
-!EXPORT_PUTTOQUEUEFAST; Put to queue for fast export
-!EXPORT_RAW_DMETHOD;Demosaic method
-!EXPORT_USE_FAST_PIPELINE;Dedicated (full processing on resized image)
-!EXPORT_USE_FAST_PIPELINE_TIP;Use a dedicated processing pipeline for images in Fast Export mode, that trades speed for quality. Resizing of the image is done as early as possible, instead of doing it at the end like in the normal pipeline. The speedup can be significant, but be prepared to see artifacts and a general degradation of output quality.
-!EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
-!EXTPROGTARGET_1;raw
-!EXTPROGTARGET_2;queue-processed
-!FILEBROWSER_ADDDELTEMPLATE;Add/Del templates...
-!FILEBROWSER_APPLYPROFILE_PARTIAL;Apply - partial
-!FILEBROWSER_AUTODARKFRAME;Auto dark-frame
-!FILEBROWSER_AUTOFLATFIELD;Auto flat-field
-!FILEBROWSER_BROWSEPATHBUTTONHINT;Click to open specified path, reload folder and apply "find" keywords.
-!FILEBROWSER_BROWSEPATHHINT;Type a path to navigate to.\n\nKeyboard shortcuts:\nCtrl-o to focus to the path text box.\nEnter / Ctrl-Enter to browse there;\nEsc to clear changes.\nShift-Esc to remove focus.\n\nPath shortcuts:\n~ - user's home directory.\n! - user's pictures directory
-!FILEBROWSER_CACHE;Cache
-!FILEBROWSER_CACHECLEARFROMFULL;Clear all including cached profiles
-!FILEBROWSER_CACHECLEARFROMPARTIAL;Clear all except cached profiles
-!FILEBROWSER_COLORLABEL_TOOLTIP;Color label.\n\nUse dropdown menu or shortcuts:\nShift-Ctrl-0 No Color\nShift-Ctrl-1 Red\nShift-Ctrl-2 Yellow\nShift-Ctrl-3 Green\nShift-Ctrl-4 Blue\nShift-Ctrl-5 Purple
-!FILEBROWSER_CURRENT_NAME;Current name:
-!FILEBROWSER_DARKFRAME;Dark-frame
-!FILEBROWSER_DELETEDLGMSGINCLPROC;Are you sure you want to delete the selected %1 files including a queue-processed version?
-!FILEBROWSER_EXTPROGMENU;Open with
-!FILEBROWSER_FLATFIELD;Flat-Field
-!FILEBROWSER_MOVETODARKFDIR;Move to dark-frames directory
-!FILEBROWSER_MOVETOFLATFIELDDIR;Move to flat-fields directory
-!FILEBROWSER_NEW_NAME;New name:
-!FILEBROWSER_OPENDEFAULTVIEWER;Windows default viewer (queue-processed)
-!FILEBROWSER_POPUPCOLORLABEL;Color label
-!FILEBROWSER_POPUPCOLORLABEL0;Label: None
-!FILEBROWSER_POPUPCOLORLABEL1;Label: Red
-!FILEBROWSER_POPUPCOLORLABEL2;Label: Yellow
-!FILEBROWSER_POPUPCOLORLABEL3;Label: Green
-!FILEBROWSER_POPUPCOLORLABEL4;Label: Blue
-!FILEBROWSER_POPUPCOLORLABEL5;Label: Purple
-!FILEBROWSER_POPUPCOPYTO;Copy to...
-!FILEBROWSER_POPUPFILEOPERATIONS;File operations
-!FILEBROWSER_POPUPMOVETO;Move to...
-!FILEBROWSER_POPUPPROCESSFAST;Put to queue (Fast export)
-!FILEBROWSER_POPUPPROFILEOPERATIONS;Processing profile operations
-!FILEBROWSER_POPUPRANK;Rank
-!FILEBROWSER_POPUPRANK0;Unrank
-!FILEBROWSER_POPUPRANK1;Rank 1 *
-!FILEBROWSER_POPUPRANK2;Rank 2 **
-!FILEBROWSER_POPUPRANK3;Rank 3 ***
-!FILEBROWSER_POPUPRANK4;Rank 4 ****
-!FILEBROWSER_POPUPRANK5;Rank 5 *****
-!FILEBROWSER_POPUPREMOVEINCLPROC;Delete with output from queue
-!FILEBROWSER_QUERYBUTTONHINT;Clear the Find query
-!FILEBROWSER_QUERYHINT;Type filenames to search for. Supports partial filenames. Separate the search terms using commas, e.g.\n1001,1004,1199\n\nExclude search terms by prefixing them with !=\ne.g.\n!=1001,1004,1199\n\nShortcuts:\nCtrl-f - focus the Find box,\nEnter - search,\nEsc - clear the Find box,\nShift-Esc - defocus the Find box.
-!FILEBROWSER_QUERYLABEL; Find:
-!FILEBROWSER_RANK1_TOOLTIP;Rank 1 *\nShortcut: Shift-1
-!FILEBROWSER_RANK2_TOOLTIP;Rank 2 *\nShortcut: Shift-2
-!FILEBROWSER_RANK3_TOOLTIP;Rank 3 *\nShortcut: Shift-3
-!FILEBROWSER_RANK4_TOOLTIP;Rank 4 *\nShortcut: Shift-4
-!FILEBROWSER_RANK5_TOOLTIP;Rank 5 *\nShortcut: Shift-5
-!FILEBROWSER_RESETDEFAULTPROFILE;Reset to default
-!FILEBROWSER_SELECTDARKFRAME;Select dark-frame...
-!FILEBROWSER_SELECTFLATFIELD;Select flat-field...
-!FILEBROWSER_SHOWCOLORLABEL1HINT;Show images labeled Red.\nShortcut: Alt-1
-!FILEBROWSER_SHOWCOLORLABEL2HINT;Show images labeled Yellow.\nShortcut: Alt-2
-!FILEBROWSER_SHOWCOLORLABEL3HINT;Show images labeled Green.\nShortcut: Alt-3
-!FILEBROWSER_SHOWCOLORLABEL4HINT;Show images labeled Blue.\nShortcut: Alt-4
-!FILEBROWSER_SHOWCOLORLABEL5HINT;Show images labeled Purple.\nShortcut: Alt-5
-!FILEBROWSER_SHOWEDITEDHINT;Show edited images.\nShortcut: 7
-!FILEBROWSER_SHOWEDITEDNOTHINT;Show not edited images.\nShortcut: 6
-!FILEBROWSER_SHOWEXIFINFO;Show Exif info.\n\nShortcuts:\ni - Multiple Editor Tabs Mode,\nAlt-i - Single Editor Tab Mode.
-!FILEBROWSER_SHOWNOTTRASHHINT;Show only non-deleted images.
-!FILEBROWSER_SHOWORIGINALHINT;Show only original images.\n\nWhen several images exist with the same filename but different extensions, the one considered original is the one whose extension is nearest the top of the parsed extensions list in Preferences > File Browser > Parsed Extensions.
-!FILEBROWSER_SHOWRECENTLYSAVEDHINT;Show saved images.\nShortcut: Alt-7
-!FILEBROWSER_SHOWRECENTLYSAVEDNOTHINT;Show unsaved images.\nShortcut: Alt-6
-!FILEBROWSER_SHOWUNCOLORHINT;Show images without a color label.\nShortcut: Alt-0
-!FILEBROWSER_UNRANK_TOOLTIP;Unrank.\nShortcut: Shift-0
-!FILECHOOSER_FILTER_ANY;All files
-!FILECHOOSER_FILTER_COLPROF;Color profiles (*.icc)
-!FILECHOOSER_FILTER_CURVE;Curve files
-!FILECHOOSER_FILTER_LCP;Lens correction profiles
-!FILECHOOSER_FILTER_PP;Processing profiles
-!FILECHOOSER_FILTER_SAME;Same format as current photo
-!FILECHOOSER_FILTER_TIFF;TIFF files
-!GENERAL_AFTER;After
-!GENERAL_APPLY;Apply
-!GENERAL_ASIMAGE;As Image
-!GENERAL_AUTO;Automatic
-!GENERAL_BEFORE;Before
-!GENERAL_CLOSE;Close
-!GENERAL_CURRENT;Current
-!GENERAL_FILE;File
-!GENERAL_NONE;None
-!GENERAL_OPEN;Open
-!GENERAL_RESET;Reset
-!GENERAL_SAVE_AS;Save as...
-!GENERAL_SLIDER;Slider
-!GENERAL_UNCHANGED;(Unchanged)
-!GENERAL_WARNING;Warning
-!GIMP_PLUGIN_INFO;Welcome to the RawTherapee GIMP plugin!\nOnce you are done editing, simply close the main RawTherapee window and the image will be automatically imported in GIMP.
-!HISTOGRAM_TOOLTIP_BAR;Show/Hide RGB indicator bar.
-!HISTOGRAM_TOOLTIP_CHRO;Show/Hide chromaticity histogram.
-!HISTOGRAM_TOOLTIP_MODE;Toggle between linear, log-linear and log-log scaling of the histogram.
-!HISTOGRAM_TOOLTIP_RAW;Show/Hide raw histogram.
-!HISTORY_MSG_82;Profile changed
-!HISTORY_MSG_83;S/H - Sharp mask
-!HISTORY_MSG_84;Perspective correction
-!HISTORY_MSG_85;Lens Correction - LCP file
-!HISTORY_MSG_86;RGB Curves - Luminosity mode
-!HISTORY_MSG_87;Impulse Noise Reduction
-!HISTORY_MSG_88;Impulse NR threshold
-!HISTORY_MSG_89;Noise Reduction
-!HISTORY_MSG_90;NR - Luminance
-!HISTORY_MSG_91;NR - Chrominance master
-!HISTORY_MSG_92;NR - Gamma
-!HISTORY_MSG_93;CbDL - Value
-!HISTORY_MSG_94;Contrast by Detail Levels
-!HISTORY_MSG_95;L*a*b* - Chromaticity
-!HISTORY_MSG_96;L*a*b* - a* curve
-!HISTORY_MSG_97;L*a*b* - b* curve
-!HISTORY_MSG_98;Demosaicing method
-!HISTORY_MSG_99;Hot pixel filter
-!HISTORY_MSG_100;Exposure - Saturation
-!HISTORY_MSG_101;HSV - Hue
-!HISTORY_MSG_102;HSV - Saturation
-!HISTORY_MSG_103;HSV - Value
-!HISTORY_MSG_104;HSV Equalizer
-!HISTORY_MSG_105;Defringe
-!HISTORY_MSG_106;Defringe - Radius
-!HISTORY_MSG_107;Defringe - Threshold
-!HISTORY_MSG_108;Exposure - HLC threshold
-!HISTORY_MSG_109;Resize - Bounding box
-!HISTORY_MSG_110;Resize - Applies to
-!HISTORY_MSG_111;L*a*b* - Avoid color shift
-!HISTORY_MSG_112;--unused--
-!HISTORY_MSG_113;L*a*b* - Red/skin prot.
-!HISTORY_MSG_114;DCB iterations
-!HISTORY_MSG_115;False color suppression
-!HISTORY_MSG_116;DCB enhancement
-!HISTORY_MSG_117;Raw CA correction - Red
-!HISTORY_MSG_118;Raw CA correction - Blue
-!HISTORY_MSG_119;Line noise filter
-!HISTORY_MSG_120;Green equilibration
-!HISTORY_MSG_121;Raw CA Correction - Auto
-!HISTORY_MSG_122;Dark-Frame - Auto-selection
-!HISTORY_MSG_123;Dark-Frame - File
-!HISTORY_MSG_124;White point correction
-!HISTORY_MSG_126;Flat-Field - File
-!HISTORY_MSG_127;Flat-Field - Auto-selection
-!HISTORY_MSG_128;Flat-Field - Blur radius
-!HISTORY_MSG_129;Flat-Field - Blur type
-!HISTORY_MSG_130;Auto distortion correction
-!HISTORY_MSG_131;NR - Luma
-!HISTORY_MSG_132;NR - Chroma
-!HISTORY_MSG_133;Output gamma
-!HISTORY_MSG_134;Free gamma
-!HISTORY_MSG_135;Free gamma
-!HISTORY_MSG_136;Free gamma slope
-!HISTORY_MSG_137;Black level - Green 1
-!HISTORY_MSG_138;Black level - Red
-!HISTORY_MSG_139;Black level - Blue
-!HISTORY_MSG_140;Black level - Green 2
-!HISTORY_MSG_141;Black level - Link greens
-!HISTORY_MSG_142;ES - Iterations
-!HISTORY_MSG_143;ES - Quantity
-!HISTORY_MSG_144;Microcontrast - Quantity
-!HISTORY_MSG_145;Microcontrast - Uniformity
-!HISTORY_MSG_146;Edge sharpening
-!HISTORY_MSG_147;ES - Luminance only
-!HISTORY_MSG_148;Microcontrast
-!HISTORY_MSG_149;Microcontrast - 3×3 matrix
-!HISTORY_MSG_150;Post-demosaic artifact/noise red.
-!HISTORY_MSG_151;Vibrance
-!HISTORY_MSG_152;Vib - Pastel tones
-!HISTORY_MSG_153;Vib - Saturated tones
-!HISTORY_MSG_154;Vib - Protect skin-tones
-!HISTORY_MSG_155;Vib - Avoid color shift
-!HISTORY_MSG_156;Vib - Link pastel/saturated
-!HISTORY_MSG_157;Vib - P/S threshold
-!HISTORY_MSG_158;TM - Strength
-!HISTORY_MSG_159;TM - Edge stopping
-!HISTORY_MSG_160;TM - Scale
-!HISTORY_MSG_161;TM - Reweighting iterates
-!HISTORY_MSG_162;Tone Mapping
-!HISTORY_MSG_163;RGB Curves - Red
-!HISTORY_MSG_164;RGB Curves - Green
-!HISTORY_MSG_165;RGB Curves - Blue
-!HISTORY_MSG_166;Exposure - Reset
-!HISTORY_MSG_167;Demosaicing method
-!HISTORY_MSG_168;L*a*b* - CC curve
-!HISTORY_MSG_169;L*a*b* - CH curve
-!HISTORY_MSG_170;Vibrance - HH curve
-!HISTORY_MSG_171;L*a*b* - LC curve
-!HISTORY_MSG_172;L*a*b* - Restrict LC
-!HISTORY_MSG_173;NR - Detail recovery
-!HISTORY_MSG_174;CIECAM02
-!HISTORY_MSG_175;CAM02 - CAT02 adaptation
-!HISTORY_MSG_176;CAM02 - Viewing surround
-!HISTORY_MSG_177;CAM02 - Scene luminosity
-!HISTORY_MSG_178;CAM02 - Viewing luminosity
-!HISTORY_MSG_179;CAM02 - White-point model
-!HISTORY_MSG_180;CAM02 - Lightness (J)
-!HISTORY_MSG_181;CAM02 - Chroma (C)
-!HISTORY_MSG_182;CAM02 - Automatic CAT02
-!HISTORY_MSG_183;CAM02 - Contrast (J)
-!HISTORY_MSG_184;CAM02 - Scene surround
-!HISTORY_MSG_185;CAM02 - Gamut control
-!HISTORY_MSG_186;CAM02 - Algorithm
-!HISTORY_MSG_187;CAM02 - Red/skin prot.
-!HISTORY_MSG_188;CAM02 - Brightness (Q)
-!HISTORY_MSG_189;CAM02 - Contrast (Q)
-!HISTORY_MSG_190;CAM02 - Saturation (S)
-!HISTORY_MSG_191;CAM02 - Colorfulness (M)
-!HISTORY_MSG_192;CAM02 - Hue (h)
-!HISTORY_MSG_193;CAM02 - Tone curve 1
-!HISTORY_MSG_194;CAM02 - Tone curve 2
-!HISTORY_MSG_195;CAM02 - Tone curve 1
-!HISTORY_MSG_196;CAM02 - Tone curve 2
-!HISTORY_MSG_197;CAM02 - Color curve
-!HISTORY_MSG_198;CAM02 - Color curve
-!HISTORY_MSG_199;CAM02 - Output histograms
-!HISTORY_MSG_200;CAM02 - Tone mapping
-!HISTORY_MSG_201;NR - Chrominance - R&G
-!HISTORY_MSG_202;NR - Chrominance - B&Y
-!HISTORY_MSG_203;NR - Color space
-!HISTORY_MSG_204;LMMSE enhancement steps
-!HISTORY_MSG_205;CAM02 - Hot/bad pixel filter
-!HISTORY_MSG_206;CAT02 - Auto scene luminosity
-!HISTORY_MSG_207;Defringe - Hue curve
-!HISTORY_MSG_208;WB - B/R equalizer
-!HISTORY_MSG_210;GF - Angle
-!HISTORY_MSG_211;Graduated Filter
-!HISTORY_MSG_212;VF - Strength
-!HISTORY_MSG_213;Vignette Filter
-!HISTORY_MSG_214;Black-and-White
-!HISTORY_MSG_215;B&W - CM - Red
-!HISTORY_MSG_216;B&W - CM - Green
-!HISTORY_MSG_217;B&W - CM - Blue
-!HISTORY_MSG_218;B&W - Gamma - Red
-!HISTORY_MSG_219;B&W - Gamma - Green
-!HISTORY_MSG_220;B&W - Gamma - Blue
-!HISTORY_MSG_221;B&W - Color filter
-!HISTORY_MSG_222;B&W - Presets
-!HISTORY_MSG_223;B&W - CM - Orange
-!HISTORY_MSG_224;B&W - CM - Yellow
-!HISTORY_MSG_225;B&W - CM - Cyan
-!HISTORY_MSG_226;B&W - CM - Magenta
-!HISTORY_MSG_227;B&W - CM - Purple
-!HISTORY_MSG_228;B&W - Luminance equalizer
-!HISTORY_MSG_229;B&W - Luminance equalizer
-!HISTORY_MSG_230;B&W - Mode
-!HISTORY_MSG_231;B&W - 'Before' curve
-!HISTORY_MSG_232;B&W - 'Before' curve type
-!HISTORY_MSG_233;B&W - 'After' curve
-!HISTORY_MSG_234;B&W - 'After' curve type
-!HISTORY_MSG_235;B&W - CM - Auto
-!HISTORY_MSG_236;--unused--
-!HISTORY_MSG_237;B&W - CM
-!HISTORY_MSG_238;GF - Feather
-!HISTORY_MSG_239;GF - Strength
-!HISTORY_MSG_240;GF - Center
-!HISTORY_MSG_241;VF - Feather
-!HISTORY_MSG_242;VF - Roundness
-!HISTORY_MSG_243;VC - Radius
-!HISTORY_MSG_244;VC - Strength
-!HISTORY_MSG_245;VC - Center
-!HISTORY_MSG_246;L*a*b* - CL curve
-!HISTORY_MSG_247;L*a*b* - LH curve
-!HISTORY_MSG_248;L*a*b* - HH curve
-!HISTORY_MSG_249;CbDL - Threshold
-!HISTORY_MSG_250;NR - Enhanced
-!HISTORY_MSG_251;B&W - Algorithm
-!HISTORY_MSG_252;CbDL - Skin tar/prot
-!HISTORY_MSG_253;CbDL - Reduce artifacts
-!HISTORY_MSG_254;CbDL - Skin hue
-!HISTORY_MSG_255;NR - Median filter
-!HISTORY_MSG_256;NR - Median - Type
-!HISTORY_MSG_257;Color Toning
-!HISTORY_MSG_258;CT - Color curve
-!HISTORY_MSG_259;CT - Opacity curve
-!HISTORY_MSG_260;CT - a*[b*] opacity
-!HISTORY_MSG_261;CT - Method
-!HISTORY_MSG_262;CT - b* opacity
-!HISTORY_MSG_263;CT - Shadows - Red
-!HISTORY_MSG_264;CT - Shadows - Green
-!HISTORY_MSG_265;CT - Shadows - Blue
-!HISTORY_MSG_266;CT - Mid - Red
-!HISTORY_MSG_267;CT - Mid - Green
-!HISTORY_MSG_268;CT - Mid - Blue
-!HISTORY_MSG_269;CT - High - Red
-!HISTORY_MSG_270;CT - High - Green
-!HISTORY_MSG_271;CT - High - Blue
-!HISTORY_MSG_272;CT - Balance
-!HISTORY_MSG_273;CT - Color Balance SMH
-!HISTORY_MSG_274;CT - Sat. Shadows
-!HISTORY_MSG_275;CT - Sat. Highlights
-!HISTORY_MSG_276;CT - Opacity
-!HISTORY_MSG_277;--unused--
-!HISTORY_MSG_278;CT - Preserve luminance
-!HISTORY_MSG_279;CT - Shadows
-!HISTORY_MSG_280;CT - Highlights
-!HISTORY_MSG_281;CT - Sat. strength
-!HISTORY_MSG_282;CT - Sat. threshold
-!HISTORY_MSG_283;CT - Strength
-!HISTORY_MSG_284;CT - Auto sat. protection
-!HISTORY_MSG_285;NR - Median - Method
-!HISTORY_MSG_286;NR - Median - Type
-!HISTORY_MSG_287;NR - Median - Iterations
-!HISTORY_MSG_288;Flat-Field - Clip control
-!HISTORY_MSG_289;Flat-Field - Clip control - Auto
-!HISTORY_MSG_290;Black Level - Red
-!HISTORY_MSG_291;Black Level - Green
-!HISTORY_MSG_292;Black Level - Blue
-!HISTORY_MSG_293;Film Simulation
-!HISTORY_MSG_294;Film Simulation - Strength
-!HISTORY_MSG_295;Film Simulation - Film
-!HISTORY_MSG_296;NR - Luminance curve
-!HISTORY_MSG_297;NR - Mode
-!HISTORY_MSG_298;Dead pixel filter
-!HISTORY_MSG_299;NR - Chrominance curve
-!HISTORY_MSG_300;-
-!HISTORY_MSG_301;NR - Luma control
-!HISTORY_MSG_302;NR - Chroma method
-!HISTORY_MSG_303;NR - Chroma method
-!HISTORY_MSG_304;W - Contrast levels
-!HISTORY_MSG_305;Wavelet Levels
-!HISTORY_MSG_306;W - Process
-!HISTORY_MSG_307;W - Process
-!HISTORY_MSG_308;W - Process direction
-!HISTORY_MSG_309;W - ES - Detail
-!HISTORY_MSG_310;W - Residual - Sky tar/prot
-!HISTORY_MSG_311;W - Wavelet levels
-!HISTORY_MSG_312;W - Residual - Shadows threshold
-!HISTORY_MSG_313;W - Chroma - Sat/past
-!HISTORY_MSG_314;W - Gamut - Reduce artifacts
-!HISTORY_MSG_315;W - Residual - Contrast
-!HISTORY_MSG_316;W - Gamut - Skin tar/prot
-!HISTORY_MSG_317;W - Gamut - Skin hue
-!HISTORY_MSG_318;W - Contrast - Highlight levels
-!HISTORY_MSG_319;W - Contrast - Highlight range
-!HISTORY_MSG_320;W - Contrast - Shadow range
-!HISTORY_MSG_321;W - Contrast - Shadow levels
-!HISTORY_MSG_322;W - Gamut - Avoid color shift
-!HISTORY_MSG_323;W - ES - Local contrast
-!HISTORY_MSG_324;W - Chroma - Pastel
-!HISTORY_MSG_325;W - Chroma - Saturated
-!HISTORY_MSG_326;W - Chroma - Method
-!HISTORY_MSG_327;W - Contrast - Apply to
-!HISTORY_MSG_328;W - Chroma - Link strength
-!HISTORY_MSG_329;W - Toning - Opacity RG
-!HISTORY_MSG_330;W - Toning - Opacity BY
-!HISTORY_MSG_331;W - Contrast levels - Extra
-!HISTORY_MSG_332;W - Tiling method
-!HISTORY_MSG_333;W - Residual - Shadows
-!HISTORY_MSG_334;W - Residual - Chroma
-!HISTORY_MSG_335;W - Residual - Highlights
-!HISTORY_MSG_336;W - Residual - Highlights threshold
-!HISTORY_MSG_337;W - Residual - Sky hue
-!HISTORY_MSG_338;W - ES - Radius
-!HISTORY_MSG_339;W - ES - Strength
-!HISTORY_MSG_340;W - Strength
-!HISTORY_MSG_341;W - Edge performance
-!HISTORY_MSG_342;W - ES - First level
-!HISTORY_MSG_343;W - Chroma levels
-!HISTORY_MSG_344;W - Meth chroma sl/cur
-!HISTORY_MSG_345;W - ES - Local contrast
-!HISTORY_MSG_346;W - ES - Local contrast method
-!HISTORY_MSG_347;W - Denoise - Level 1
-!HISTORY_MSG_348;W - Denoise - Level 2
-!HISTORY_MSG_349;W - Denoise - Level 3
-!HISTORY_MSG_350;W - ES - Edge detection
-!HISTORY_MSG_351;W - Residual - HH curve
-!HISTORY_MSG_352;W - Background
-!HISTORY_MSG_353;W - ES - Gradient sensitivity
-!HISTORY_MSG_354;W - ES - Enhanced
-!HISTORY_MSG_355;W - ES - Threshold low
-!HISTORY_MSG_356;W - ES - Threshold high
-!HISTORY_MSG_357;W - Denoise - Link with ES
-!HISTORY_MSG_358;W - Gamut - CH
-!HISTORY_MSG_359;Hot/Dead - Threshold
-!HISTORY_MSG_360;TM - Gamma
-!HISTORY_MSG_361;W - Final - Chroma balance
-!HISTORY_MSG_362;W - Residual - Compression method
-!HISTORY_MSG_363;W - Residual - Compression strength
-!HISTORY_MSG_364;W - Final - Contrast balance
-!HISTORY_MSG_365;W - Final - Delta balance
-!HISTORY_MSG_366;W - Residual - Compression gamma
-!HISTORY_MSG_367;W - Final - 'After' contrast curve
-!HISTORY_MSG_368;W - Final - Contrast balance
-!HISTORY_MSG_369;W - Final - Balance method
-!HISTORY_MSG_370;W - Final - Local contrast curve
-!HISTORY_MSG_371;Post-Resize Sharpening
-!HISTORY_MSG_372;PRS USM - Radius
-!HISTORY_MSG_373;PRS USM - Amount
-!HISTORY_MSG_374;PRS USM - Threshold
-!HISTORY_MSG_375;PRS USM - Sharpen only edges
-!HISTORY_MSG_376;PRS USM - Edge detection radius
-!HISTORY_MSG_377;PRS USM - Edge tolerance
-!HISTORY_MSG_378;PRS USM - Halo control
-!HISTORY_MSG_379;PRS USM - Halo control amount
-!HISTORY_MSG_380;PRS - Method
-!HISTORY_MSG_381;PRS RLD - Radius
-!HISTORY_MSG_382;PRS RLD - Amount
-!HISTORY_MSG_383;PRS RLD - Damping
-!HISTORY_MSG_384;PRS RLD - Iterations
-!HISTORY_MSG_385;W - Residual - Color Balance
-!HISTORY_MSG_386;W - Residual - CB green high
-!HISTORY_MSG_387;W - Residual - CB blue high
-!HISTORY_MSG_388;W - Residual - CB green mid
-!HISTORY_MSG_389;W - Residual - CB blue mid
-!HISTORY_MSG_390;W - Residual - CB green low
-!HISTORY_MSG_391;W - Residual - CB blue low
-!HISTORY_MSG_392;W - Residual - Color Balance
-!HISTORY_MSG_393;DCP - Look table
-!HISTORY_MSG_394;DCP - Baseline exposure
-!HISTORY_MSG_395;DCP - Base table
-!HISTORY_MSG_396;W - Contrast sub-tool
-!HISTORY_MSG_397;W - Chroma sub-tool
-!HISTORY_MSG_398;W - ES sub-tool
-!HISTORY_MSG_399;W - Residual sub-tool
-!HISTORY_MSG_400;W - Final sub-tool
-!HISTORY_MSG_401;W - Toning sub-tool
-!HISTORY_MSG_402;W - Denoise sub-tool
-!HISTORY_MSG_403;W - ES - Edge sensitivity
-!HISTORY_MSG_404;W - ES - Base amplification
-!HISTORY_MSG_405;W - Denoise - Level 4
-!HISTORY_MSG_406;W - ES - Neighboring pixels
-!HISTORY_MSG_407;Retinex - Method
-!HISTORY_MSG_408;Retinex - Radius
-!HISTORY_MSG_409;Retinex - Contrast
-!HISTORY_MSG_410;Retinex - Offset
-!HISTORY_MSG_411;Retinex - Strength
-!HISTORY_MSG_412;Retinex - Gaussian gradient
-!HISTORY_MSG_413;Retinex - Contrast
-!HISTORY_MSG_414;Retinex - Histogram - Lab
-!HISTORY_MSG_415;Retinex - Transmission
-!HISTORY_MSG_416;Retinex
-!HISTORY_MSG_417;Retinex - Transmission median
-!HISTORY_MSG_418;Retinex - Threshold
-!HISTORY_MSG_419;Retinex - Color space
-!HISTORY_MSG_420;Retinex - Histogram - HSL
-!HISTORY_MSG_421;Retinex - Gamma
-!HISTORY_MSG_422;Retinex - Gamma
-!HISTORY_MSG_423;Retinex - Gamma slope
-!HISTORY_MSG_424;Retinex - HL threshold
-!HISTORY_MSG_425;Retinex - Log base
-!HISTORY_MSG_426;Retinex - Hue equalizer
-!HISTORY_MSG_427;Output rendering intent
-!HISTORY_MSG_428;Monitor rendering intent
-!HISTORY_MSG_429;Retinex - Iterations
-!HISTORY_MSG_430;Retinex - Transmission gradient
-!HISTORY_MSG_431;Retinex - Strength gradient
-!HISTORY_MSG_432;Retinex - M - Highlights
-!HISTORY_MSG_433;Retinex - M - Highlights TW
-!HISTORY_MSG_434;Retinex - M - Shadows
-!HISTORY_MSG_435;Retinex - M - Shadows TW
-!HISTORY_MSG_436;Retinex - M - Radius
-!HISTORY_MSG_437;Retinex - M - Method
-!HISTORY_MSG_438;Retinex - M - Equalizer
-!HISTORY_MSG_439;Retinex - Process
-!HISTORY_MSG_440;CbDL - Method
-!HISTORY_MSG_441;Retinex - Gain transmission
-!HISTORY_MSG_442;Retinex - Scale
-!HISTORY_MSG_443;Output black point compensation
-!HISTORY_MSG_444;WB - Temp bias
-!HISTORY_MSG_445;Raw sub-image
-!HISTORY_MSG_449;PS - ISO adaption
-!HISTORY_MSG_452;PS - Show motion
-!HISTORY_MSG_453;PS - Show mask only
-!HISTORY_MSG_457;PS - Check red/blue
-!HISTORY_MSG_462;PS - Check green
-!HISTORY_MSG_464;PS - Blur motion mask
-!HISTORY_MSG_465;PS - Blur radius
-!HISTORY_MSG_468;PS - Fill holes
-!HISTORY_MSG_469;PS - Median
-!HISTORY_MSG_471;PS - Motion correction
-!HISTORY_MSG_472;PS - Smooth transitions
-!HISTORY_MSG_473;PS - Use LMMSE
-!HISTORY_MSG_474;PS - Equalize
-!HISTORY_MSG_475;PS - Equalize channel
-!HISTORY_MSG_476;CAM02 - Temp out
-!HISTORY_MSG_477;CAM02 - Green out
-!HISTORY_MSG_478;CAM02 - Yb out
-!HISTORY_MSG_479;CAM02 - CAT02 adaptation out
-!HISTORY_MSG_480;CAM02 - Automatic CAT02 out
-!HISTORY_MSG_481;CAM02 - Temp scene
-!HISTORY_MSG_482;CAM02 - Green scene
-!HISTORY_MSG_483;CAM02 - Yb scene
-!HISTORY_MSG_484;CAM02 - Auto Yb scene
-!HISTORY_MSG_485;Lens Correction
-!HISTORY_MSG_486;Lens Correction - Camera
-!HISTORY_MSG_487;Lens Correction - Lens
-!HISTORY_MSG_488;Dynamic Range Compression
-!HISTORY_MSG_489;DRC - Detail
-!HISTORY_MSG_490;DRC - Amount
-!HISTORY_MSG_491;White Balance
-!HISTORY_MSG_492;RGB Curves
-!HISTORY_MSG_493;L*a*b* Adjustments
-!HISTORY_MSG_CLAMPOOG;Clip out-of-gamut colors
-!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_AB;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_CHANNEL;CT - Channel
-!HISTORY_MSG_COLORTONING_LABREGION_CHROMATICITYMASK;CT - region C mask
-!HISTORY_MSG_COLORTONING_LABREGION_HUEMASK;CT - H mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESS;CT - Lightness
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESSMASK;CT - L mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIST;CT - List
-!HISTORY_MSG_COLORTONING_LABREGION_MASKBLUR;CT - region mask blur
-!HISTORY_MSG_COLORTONING_LABREGION_OFFSET;CT - region offset
-!HISTORY_MSG_COLORTONING_LABREGION_POWER;CT - region power
-!HISTORY_MSG_COLORTONING_LABREGION_SATURATION;CT - Saturation
-!HISTORY_MSG_COLORTONING_LABREGION_SHOWMASK;CT - region show mask
-!HISTORY_MSG_COLORTONING_LABREGION_SLOPE;CT - region slope
-!HISTORY_MSG_DEHAZE_DEPTH;Dehaze - Depth
-!HISTORY_MSG_DEHAZE_ENABLED;Haze Removal
-!HISTORY_MSG_DEHAZE_SHOW_DEPTH_MAP;Dehaze - Show depth map
-!HISTORY_MSG_DEHAZE_STRENGTH;Dehaze - Strength
-!HISTORY_MSG_DUALDEMOSAIC_AUTO_CONTRAST;Dual demosaic - Auto threshold
-!HISTORY_MSG_DUALDEMOSAIC_CONTRAST;Dual demosaic - Contrast threshold
-!HISTORY_MSG_HISTMATCHING;Auto-matched tone curve
-!HISTORY_MSG_ICM_OUTPUT_PRIMARIES;Output - Primaries
-!HISTORY_MSG_ICM_OUTPUT_TEMP;Output - ICC-v4 illuminant D
-!HISTORY_MSG_ICM_OUTPUT_TYPE;Output - Type
-!HISTORY_MSG_ICM_WORKING_GAMMA;Working - Gamma
-!HISTORY_MSG_ICM_WORKING_SLOPE;Working - Slope
-!HISTORY_MSG_ICM_WORKING_TRC_METHOD;Working - TRC method
-!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
-!HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness
-!HISTORY_MSG_LOCALCONTRAST_ENABLED;Local Contrast
-!HISTORY_MSG_LOCALCONTRAST_LIGHTNESS;Local Contrast - Lightness
-!HISTORY_MSG_LOCALCONTRAST_RADIUS;Local Contrast - Radius
-!HISTORY_MSG_METADATA_MODE;Metadata copy mode
-!HISTORY_MSG_MICROCONTRAST_CONTRAST;Microcontrast - Contrast threshold
-!HISTORY_MSG_PIXELSHIFT_DEMOSAIC;PS - Demosaic method for motion
-!HISTORY_MSG_PREPROCESS_LINEDENOISE_DIRECTION;Line noise filter direction
-!HISTORY_MSG_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!HISTORY_MSG_PRSHARPEN_CONTRAST;PRS - Contrast threshold
-!HISTORY_MSG_RAWCACORR_AUTOIT;Raw CA Correction - Iterations
-!HISTORY_MSG_RAWCACORR_COLORSHIFT;Raw CA Correction - Avoid color shift
-!HISTORY_MSG_RAW_BORDER;Raw border
-!HISTORY_MSG_RESIZE_ALLOWUPSCALING;Resize - Allow upscaling
-!HISTORY_MSG_SHARPENING_BLUR;Sharpening - Blur radius
-!HISTORY_MSG_SHARPENING_CONTRAST;Sharpening - Contrast threshold
-!HISTORY_MSG_SH_COLORSPACE;S/H - Colorspace
-!HISTORY_MSG_SOFTLIGHT_ENABLED;Soft light
-!HISTORY_MSG_SOFTLIGHT_STRENGTH;Soft light - Strength
-!HISTORY_MSG_TM_FATTAL_ANCHOR;DRC - Anchor
-!HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s
-!ICCPROFCREATOR_COPYRIGHT;Copyright:
-!ICCPROFCREATOR_COPYRIGHT_RESET_TOOLTIP;Reset to the default copyright, granted to "RawTherapee, CC0"
-!ICCPROFCREATOR_CUSTOM;Custom
-!ICCPROFCREATOR_DESCRIPTION;Description:
-!ICCPROFCREATOR_DESCRIPTION_ADDPARAM;Append gamma and slope values to the description
-!ICCPROFCREATOR_DESCRIPTION_TOOLTIP;Leave empty to set the default description.
-!ICCPROFCREATOR_GAMMA;Gamma
-!ICCPROFCREATOR_ICCVERSION;ICC version:
-!ICCPROFCREATOR_ILL;Illuminant:
-!ICCPROFCREATOR_ILL_41;D41
-!ICCPROFCREATOR_ILL_50;D50
-!ICCPROFCREATOR_ILL_55;D55
-!ICCPROFCREATOR_ILL_60;D60
-!ICCPROFCREATOR_ILL_65;D65
-!ICCPROFCREATOR_ILL_80;D80
-!ICCPROFCREATOR_ILL_DEF;Default
-!ICCPROFCREATOR_ILL_INC;StdA 2856K
-!ICCPROFCREATOR_ILL_TOOLTIP;You can only set the illuminant for ICC v4 profiles.
-!ICCPROFCREATOR_PRIMARIES;Primaries:
-!ICCPROFCREATOR_PRIM_ACESP0;ACES AP0
-!ICCPROFCREATOR_PRIM_ACESP1;ACES AP1
-!ICCPROFCREATOR_PRIM_ADOBE;Adobe RGB (1998)
-!ICCPROFCREATOR_PRIM_BEST;BestRGB
-!ICCPROFCREATOR_PRIM_BETA;BetaRGB
-!ICCPROFCREATOR_PRIM_BLUX;Blue X
-!ICCPROFCREATOR_PRIM_BLUY;Blue Y
-!ICCPROFCREATOR_PRIM_BRUCE;BruceRGB
-!ICCPROFCREATOR_PRIM_GREX;Green X
-!ICCPROFCREATOR_PRIM_GREY;Green Y
-!ICCPROFCREATOR_PRIM_PROPH;Prophoto
-!ICCPROFCREATOR_PRIM_REC2020;Rec2020
-!ICCPROFCREATOR_PRIM_REDX;Red X
-!ICCPROFCREATOR_PRIM_REDY;Red Y
-!ICCPROFCREATOR_PRIM_SRGB;sRGB
-!ICCPROFCREATOR_PRIM_TOOLTIP;You can only set custom primaries for ICC v4 profiles.
-!ICCPROFCREATOR_PRIM_WIDEG;Widegamut
-!ICCPROFCREATOR_PROF_V2;ICC v2
-!ICCPROFCREATOR_PROF_V4;ICC v4
-!ICCPROFCREATOR_SAVEDIALOG_TITLE;Save ICC profile as...
-!ICCPROFCREATOR_SLOPE;Slope
-!ICCPROFCREATOR_TRC_PRESET;Tone response curve:
-!IPTCPANEL_CATEGORYHINT;Identifies the subject of the image in the opinion of the provider.
-!IPTCPANEL_CITYHINT;Enter the name of the city pictured in this image.
-!IPTCPANEL_COPYRIGHT;Copyright notice
-!IPTCPANEL_COPYRIGHTHINT;Enter a Notice on the current owner of the Copyright for this image, such as ©2008 Jane Doe.
-!IPTCPANEL_COUNTRYHINT;Enter the name of the country pictured in this image.
-!IPTCPANEL_CREATOR;Creator
-!IPTCPANEL_CREATORHINT;Enter the name of the person that created this image.
-!IPTCPANEL_CREATORJOBTITLE;Creator's job title
-!IPTCPANEL_CREATORJOBTITLEHINT;Enter the Job Title of the person listed in the Creator field.
-!IPTCPANEL_DATECREATEDHINT;Enter the Date the image was taken.
-!IPTCPANEL_DESCRIPTION;Description
-!IPTCPANEL_DESCRIPTIONHINT;Enter a "caption" describing the who, what, and why of what is happening in this image, this might include names of people, and/or their role in the action that is taking place within the image.
-!IPTCPANEL_DESCRIPTIONWRITER;Description writer
-!IPTCPANEL_DESCRIPTIONWRITERHINT;Enter the name of the person involved in writing, editing or correcting the description of the image.
-!IPTCPANEL_HEADLINEHINT;Enter a brief publishable synopsis or summary of the contents of the image.
-!IPTCPANEL_INSTRUCTIONSHINT;Enter information about embargoes, or other restrictions not covered by the Copyright field.
-!IPTCPANEL_KEYWORDSHINT;Enter any number of keywords, terms or phrases used to express the subject matter in the image.
-!IPTCPANEL_PROVINCE;Province or state
-!IPTCPANEL_PROVINCEHINT;Enter the name of the province or state pictured in this image.
-!IPTCPANEL_SOURCEHINT;Enter or edit the name of a person or party who has a role in the content supply chain, such as a person or entity from whom you received this image from.
-!IPTCPANEL_SUPPCATEGORIES;Supplemental categories
-!IPTCPANEL_SUPPCATEGORIESHINT;Further refines the subject of the image.
-!IPTCPANEL_TITLEHINT;Enter a short verbal and human readable name for the image, this may be the file name.
-!IPTCPANEL_TRANSREFERENCE;Job ID
-!IPTCPANEL_TRANSREFERENCEHINT;Enter a number or identifier needed for workflow control or tracking.
-!MAIN_BUTTON_FULLSCREEN;Fullscreen
-!MAIN_BUTTON_ICCPROFCREATOR;ICC Profile Creator
-!MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4
-!MAIN_BUTTON_NAVPREV_TOOLTIP;Navigate to the previous image relative to image opened in the Editor.\nShortcut: Shift-F3\n\nTo navigate to the previous image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F3
-!MAIN_BUTTON_NAVSYNC_TOOLTIP;Synchronize the File Browser or Filmstrip with the Editor to reveal the thumbnail of the currently opened image, and clear any active filters.\nShortcut: x\n\nAs above, but without clearing active filters:\nShortcut: y\n(Note that the thumbnail of the opened image will not be shown if filtered out).
-!MAIN_BUTTON_PUTTOQUEUE_TOOLTIP;Put current image to processing queue.\nShortcut: Ctrl+b
-!MAIN_BUTTON_SAVE_TOOLTIP;Save current image.\nShortcut: Ctrl+s\nSave current profile (.pp3).\nShortcut: Ctrl+Shift+s
-!MAIN_BUTTON_SENDTOEDITOR_TOOLTIP;Edit current image in external editor.\nShortcut: Ctrl+e
-!MAIN_BUTTON_SHOWHIDESIDEPANELS_TOOLTIP;Show/hide all side panels.\nShortcut: m
-!MAIN_BUTTON_UNFULLSCREEN;Exit fullscreen
-!MAIN_FRAME_BATCHQUEUE_TOOLTIP;Processing queue.\nShortcut: Ctrl-F3
-!MAIN_FRAME_EDITOR;Editor
-!MAIN_FRAME_EDITOR_TOOLTIP;Editor.\nShortcut: Ctrl-F4
-!MAIN_FRAME_FILEBROWSER_TOOLTIP;File browser.\nShortcut: Ctrl-F2
-!MAIN_FRAME_PLACES_DEL;Remove
-!MAIN_MSG_EMPTYFILENAME;Filename unspecified!
-!MAIN_MSG_IMAGEUNPROCESSED;This command requires all selected images to be queue-processed first.
-!MAIN_MSG_NAVIGATOR;Navigator
-!MAIN_MSG_OPERATIONCANCELLED;Operation cancelled
-!MAIN_MSG_PATHDOESNTEXIST;The path\n\n%1\n\ndoes not exist. Please set a correct path in Preferences.
-!MAIN_MSG_SETPATHFIRST;You first have to set a target path in Preferences in order to use this function!
-!MAIN_MSG_TOOMANYOPENEDITORS;Too many open editors.\nPlease close an editor to continue.
-!MAIN_MSG_WRITEFAILED;Failed to write\n"%1"\n\nMake sure that the folder exists and that you have write permission to it.
-!MAIN_TAB_ADVANCED;Advanced
-!MAIN_TAB_ADVANCED_TOOLTIP;Shortcut: Alt-w
-!MAIN_TAB_COLOR_TOOLTIP;Shortcut: Alt-c
-!MAIN_TAB_DETAIL_TOOLTIP;Shortcut: Alt-d
-!MAIN_TAB_EXPORT; Fast Export
-!MAIN_TAB_EXPOSURE_TOOLTIP;Shortcut: Alt-e
-!MAIN_TAB_FAVORITES;Favorites
-!MAIN_TAB_FAVORITES_TOOLTIP;Shortcut: Alt-u
-!MAIN_TAB_INSPECT; Inspect
-!MAIN_TAB_METADATA_TOOLTIP;Shortcut: Alt-m
-!MAIN_TAB_RAW;Raw
-!MAIN_TAB_RAW_TOOLTIP;Shortcut: Alt-r
-!MAIN_TAB_TRANSFORM_TOOLTIP;Shortcut: Alt-t
-!MAIN_TOOLTIP_BACKCOLOR0;Background color of the preview: theme-based\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR1;Background color of the preview: black\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR2;Background color of the preview: white\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR3;Background color of the preview: middle grey\nShortcut: 9
-!MAIN_TOOLTIP_BEFOREAFTERLOCK;Lock / Unlock the Before view\n\nLock: keep the Before view unchanged.\nUseful to evaluate the cumulative effect of multiple tools.\nAdditionally, comparisons can be made to any state in the History.\n\nUnlock: the Before view will follow the After view one step behind, showing the image before the effect of the currently used tool.
-!MAIN_TOOLTIP_PREVIEWB;Preview the blue channel.\nShortcut: b
-!MAIN_TOOLTIP_PREVIEWFOCUSMASK;Preview the focus mask.\nShortcut: Shift-f\n\nMore accurate on images with shallow depth of field, low noise and at higher zoom levels.\nZoom out to 10-30% to improve detection accuracy on noisy images.
-!MAIN_TOOLTIP_PREVIEWG;Preview the green channel.\nShortcut: g
-!MAIN_TOOLTIP_PREVIEWL;Preview the luminosity.\nShortcut: v\n\n0.299*R + 0.587*G + 0.114*B
-!MAIN_TOOLTIP_PREVIEWR;Preview the red channel.\nShortcut: r
-!MAIN_TOOLTIP_PREVIEWSHARPMASK;Preview the sharpening contrast mask.\nShortcut: p\n\nOnly works when sharpening is enabled and zoom >= 100%.
-!MAIN_TOOLTIP_SHOWHIDELP1;Show/Hide the left panel.\nShortcut: l
-!MAIN_TOOLTIP_SHOWHIDERP1;Show/Hide the right panel.\nShortcut: Alt-l
-!MAIN_TOOLTIP_SHOWHIDETP1;Show/Hide the top panel.\nShortcut: Shift-l
-!MAIN_TOOLTIP_THRESHOLD;Threshold
-!MAIN_TOOLTIP_TOGGLE;Toggle the Before/After view.\nShortcut: Shift-b
-!MONITOR_PROFILE_SYSTEM;System default
-!NAVIGATOR_B;B:
-!NAVIGATOR_G;G:
-!NAVIGATOR_H;H:
-!NAVIGATOR_LAB_A;a*:
-!NAVIGATOR_LAB_B;b*:
-!NAVIGATOR_LAB_L;L*:
-!NAVIGATOR_NA; --
-!NAVIGATOR_R;R:
-!NAVIGATOR_S;S:
-!NAVIGATOR_V;V:
-!NAVIGATOR_XY_FULL;Width: %1, Height: %2
-!NAVIGATOR_XY_NA;x: --, y: --
-!OPTIONS_BUNDLED_MISSING;The bundled profile "%1" could not be found!\n\nYour installation could be damaged.\n\nDefault internal values will be used instead.
-!OPTIONS_DEFIMG_MISSING;The default profile for non-raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!OPTIONS_DEFRAW_MISSING;The default profile for raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!PARTIALPASTE_ADVANCEDGROUP;Advanced Settings
-!PARTIALPASTE_CHANNELMIXER;Channel mixer
-!PARTIALPASTE_CHANNELMIXERBW;Black-and-white
-!PARTIALPASTE_COLORAPP;CIECAM02
-!PARTIALPASTE_COLORTONING;Color toning
-!PARTIALPASTE_COMMONTRANSFORMPARAMS;Auto-fill
-!PARTIALPASTE_DARKFRAMEAUTOSELECT;Dark-frame auto-selection
-!PARTIALPASTE_DARKFRAMEFILE;Dark-frame file
-!PARTIALPASTE_DEFRINGE;Defringe
-!PARTIALPASTE_DEHAZE;Haze removal
-!PARTIALPASTE_DETAILGROUP;Detail Settings
-!PARTIALPASTE_DIRPYRDENOISE;Noise reduction
-!PARTIALPASTE_DIRPYREQUALIZER;Contrast by detail levels
-!PARTIALPASTE_EPD;Tone mapping
-!PARTIALPASTE_EQUALIZER;Wavelet levels
-!PARTIALPASTE_EVERYTHING;Everything
-!PARTIALPASTE_FILMSIMULATION;Film simulation
-!PARTIALPASTE_FLATFIELDAUTOSELECT;Flat-field auto-selection
-!PARTIALPASTE_FLATFIELDBLURRADIUS;Flat-field blur radius
-!PARTIALPASTE_FLATFIELDBLURTYPE;Flat-field blur type
-!PARTIALPASTE_FLATFIELDCLIPCONTROL;Flat-field clip control
-!PARTIALPASTE_FLATFIELDFILE;Flat-field file
-!PARTIALPASTE_GRADIENT;Graduated filter
-!PARTIALPASTE_HSVEQUALIZER;HSV equalizer
-!PARTIALPASTE_IMPULSEDENOISE;Impulse noise reduction
-!PARTIALPASTE_LABCURVE;L*a*b* adjustments
-!PARTIALPASTE_LENSPROFILE;Profiled lens correction
-!PARTIALPASTE_LOCALCONTRAST;Local contrast
-!PARTIALPASTE_METADATA;Metadata mode
-!PARTIALPASTE_PCVIGNETTE;Vignette filter
-!PARTIALPASTE_PERSPECTIVE;Perspective
-!PARTIALPASTE_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!PARTIALPASTE_PREPROCESS_GREENEQUIL;Green equilibration
-!PARTIALPASTE_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!PARTIALPASTE_PREPROCESS_LINEDENOISE;Line noise filter
-!PARTIALPASTE_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!PARTIALPASTE_PRSHARPENING;Post-resize sharpening
-!PARTIALPASTE_RAWCACORR_AUTO;CA auto-correction
-!PARTIALPASTE_RAWCACORR_AVOIDCOLORSHIFT;CA avoid color shift
-!PARTIALPASTE_RAWCACORR_CAREDBLUE;CA red & blue
-!PARTIALPASTE_RAWEXPOS_BLACK;Black levels
-!PARTIALPASTE_RAWEXPOS_LINEAR;White point correction
-!PARTIALPASTE_RAWGROUP;Raw Settings
-!PARTIALPASTE_RAW_BORDER;Raw border
-!PARTIALPASTE_RAW_DCBENHANCE;DCB enhancement
-!PARTIALPASTE_RAW_DCBITERATIONS;DCB iterations
-!PARTIALPASTE_RAW_DMETHOD;Demosaic method
-!PARTIALPASTE_RAW_FALSECOLOR;False color suppression
-!PARTIALPASTE_RAW_IMAGENUM;Sub-image
-!PARTIALPASTE_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!PARTIALPASTE_RAW_PIXELSHIFT;Pixel Shift
-!PARTIALPASTE_RETINEX;Retinex
-!PARTIALPASTE_RGBCURVES;RGB curves
-!PARTIALPASTE_SHARPENEDGE;Edges
-!PARTIALPASTE_SHARPENMICRO;Microcontrast
-!PARTIALPASTE_SOFTLIGHT;Soft light
-!PARTIALPASTE_TM_FATTAL;Dynamic range compression
-!PARTIALPASTE_VIBRANCE;Vibrance
-!PREFERENCES_ADD;Add
-!PREFERENCES_APPEARANCE;Appearance
-!PREFERENCES_APPEARANCE_COLORPICKERFONT;Color picker font
-!PREFERENCES_APPEARANCE_CROPMASKCOLOR;Crop mask color
-!PREFERENCES_APPEARANCE_MAINFONT;Main font
-!PREFERENCES_APPEARANCE_NAVGUIDECOLOR;Navigator guide color
-!PREFERENCES_APPEARANCE_THEME;Theme
-!PREFERENCES_AUTOMONPROFILE;Use operating system's main monitor color profile
-!PREFERENCES_AUTOSAVE_TP_OPEN;Save tool collapsed/expanded state on exit
-!PREFERENCES_BATCH_PROCESSING;Batch Processing
-!PREFERENCES_BEHADDALL;All to 'Add'
-!PREFERENCES_BEHADDALLHINT;Set all parameters to the Add mode.\nAdjustments of parameters in the batch tool panel will be deltas to the stored values.
-!PREFERENCES_BEHAVIOR;Behavior
-!PREFERENCES_BEHSETALL;All to 'Set'
-!PREFERENCES_BEHSETALLHINT;Set all parameters to the Set mode.\nAdjustments of parameters in the batch tool panel will be absolute, the actual values will be displayed.
-!PREFERENCES_BLACKBODY;Tungsten
-!PREFERENCES_CACHECLEAR;Clear
-!PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
-!PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
-!PREFERENCES_CACHECLEAR_ONLYPROFILES;Clear only cached processing profiles:
-!PREFERENCES_CACHECLEAR_SAFETY;Only files in the cache are cleared. Processing profiles stored alongside the source images are not touched.
-!PREFERENCES_CHUNKSIZES;Tiles per thread
-!PREFERENCES_CHUNKSIZE_RAW_AMAZE;AMaZE demosaic
-!PREFERENCES_CHUNKSIZE_RAW_CA;Raw CA correction
-!PREFERENCES_CHUNKSIZE_RAW_RCD;RCD demosaic
-!PREFERENCES_CHUNKSIZE_RAW_XT;Xtrans demosaic
-!PREFERENCES_CHUNKSIZE_RGB;RGB processing
-!PREFERENCES_CLUTSCACHE;HaldCLUT Cache
-!PREFERENCES_CLUTSCACHE_LABEL;Maximum number of cached CLUTs
-!PREFERENCES_CLUTSDIR;HaldCLUT directory
-!PREFERENCES_CMMBPC;Black point compensation
-!PREFERENCES_CROP;Crop Editing
-!PREFERENCES_CROP_AUTO_FIT;Automatically zoom to fit the crop
-!PREFERENCES_CROP_GUIDES;Guides shown when not editing the crop
-!PREFERENCES_CROP_GUIDES_FRAME;Frame
-!PREFERENCES_CROP_GUIDES_FULL;Original
-!PREFERENCES_CROP_GUIDES_NONE;None
-!PREFERENCES_CURVEBBOXPOS;Position of curve copy & paste buttons
-!PREFERENCES_CURVEBBOXPOS_ABOVE;Above
-!PREFERENCES_CURVEBBOXPOS_BELOW;Below
-!PREFERENCES_CURVEBBOXPOS_LEFT;Left
-!PREFERENCES_CURVEBBOXPOS_RIGHT;Right
-!PREFERENCES_CUSTPROFBUILD;Custom Processing Profile Builder
-!PREFERENCES_CUSTPROFBUILDHINT;Executable (or script) file called when a new initial processing profile should be generated for an image.\n\nThe path of the communication file (*.ini style, a.k.a. "Keyfile") is added as a command line parameter. It contains various parameters required for the scripts and image Exif to allow a rules-based processing profile generation.\n\nWARNING: You are responsible for using double quotes where necessary if you're using paths containing spaces.
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys format
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
-!PREFERENCES_CUSTPROFBUILDPATH;Executable path
-!PREFERENCES_D50;Settings in main menu
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_D55;5500K
-!PREFERENCES_D60;6000K
-!PREFERENCES_D65;6500K
-!PREFERENCES_DARKFRAMEFOUND;Found
-!PREFERENCES_DARKFRAMESHOTS;shots
-!PREFERENCES_DARKFRAMETEMPLATES;templates
-!PREFERENCES_DIRDARKFRAMES;Dark-frames directory
-!PREFERENCES_DIRECTORIES;Directories
-!PREFERENCES_EDITORCMDLINE;Custom command line
-!PREFERENCES_EDITORLAYOUT;Editor layout
-!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_FLATFIELDFOUND;Found
-!PREFERENCES_FLATFIELDSDIR;Flat-fields directory
-!PREFERENCES_FLATFIELDSHOTS;shots
-!PREFERENCES_FLATFIELDTEMPLATES;templates
-!PREFERENCES_FLUOF2;Fluorescent F2
-!PREFERENCES_FLUOF7;Fluorescent F7
-!PREFERENCES_FLUOF11;Fluorescent F11
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY;Output device's Yb luminance (%)
-!PREFERENCES_GREY05;Yb=05 CIE L#30
-!PREFERENCES_GREY10;Yb=10 CIE L#40
-!PREFERENCES_GREY15;Yb=15 CIE L#45
-!PREFERENCES_GREY18;Settings in main menu
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREY23;Yb=23 CIE L#55
-!PREFERENCES_GREY30;Yb=30 CIE L#60
-!PREFERENCES_GREY40;Yb=40 CIE L#70
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram in left panel
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
-!PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
-!PREFERENCES_INSPECT_LABEL;Inspect
-!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
-!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
-!PREFERENCES_INTERNALTHUMBIFUNTOUCHED;Show embedded JPEG thumbnail if raw is unedited
-!PREFERENCES_LANG;Language
-!PREFERENCES_LANGAUTODETECT;Use system language
-!PREFERENCES_MAXRECENTFOLDERS;Maximum number of recent folders
-!PREFERENCES_MENUGROUPEXTPROGS;Group "Open with"
-!PREFERENCES_MENUGROUPFILEOPERATIONS;Group "File operations"
-!PREFERENCES_MENUGROUPLABEL;Group "Color label"
-!PREFERENCES_MENUGROUPPROFILEOPERATIONS;Group "Processing profile operations"
-!PREFERENCES_MENUGROUPRANK;Group "Rank"
-!PREFERENCES_MENUOPTIONS;Context Menu Options
-!PREFERENCES_METADATA;Metadata
-!PREFERENCES_MONINTENT;Default rendering intent
-!PREFERENCES_MONITOR;Monitor
-!PREFERENCES_MONPROFILE;Default color profile
-!PREFERENCES_MONPROFILE_WARNOSX;Due to MacOS limitations, only sRGB is supported.
-!PREFERENCES_MULTITAB;Multiple Editor Tabs Mode
-!PREFERENCES_MULTITABDUALMON;Multiple Editor Tabs In Own Window Mode
-!PREFERENCES_NAVIGATIONFRAME;Navigation
-!PREFERENCES_OVERLAY_FILENAMES;Overlay filenames on thumbnails in the file browser
-!PREFERENCES_OVERLAY_FILENAMES_FILMSTRIP;Overlay filenames on thumbnails in the editor pannel
-!PREFERENCES_OVERWRITEOUTPUTFILE;Overwrite existing output files
-!PREFERENCES_PANFACTORLABEL;Pan rate amplification
-!PREFERENCES_PARSEDEXTDOWNHINT;Move selected extension down in the list.
-!PREFERENCES_PARSEDEXTUPHINT;Move selected extension up in the list.
-!PREFERENCES_PERFORMANCE_MEASURE;Measure
-!PREFERENCES_PERFORMANCE_MEASURE_HINT;Logs processing times in console
-!PREFERENCES_PERFORMANCE_THREADS;Threads
-!PREFERENCES_PERFORMANCE_THREADS_LABEL;Maximum number of threads for Noise Reduction and Wavelet Levels (0 = Automatic)
-!PREFERENCES_PREVDEMO;Preview Demosaic Method
-!PREFERENCES_PREVDEMO_FAST;Fast
-!PREFERENCES_PREVDEMO_LABEL;Demosaicing method used for the preview at <100% zoom:
-!PREFERENCES_PREVDEMO_SIDECAR;As in PP3
-!PREFERENCES_PRINTER;Printer (Soft-Proofing)
-!PREFERENCES_PROFILESAVEBOTH;Save processing profile both to the cache and next to the input file
-!PREFERENCES_PROFILESAVELOCATION;Processing profile saving location
-!PREFERENCES_PROFILE_NONE;None
-!PREFERENCES_PROPERTY;Property
-!PREFERENCES_PRTINTENT;Rendering intent
-!PREFERENCES_PRTPROFILE;Color profile
-!PREFERENCES_REMEMBERZOOMPAN;Remember zoom % and pan offset
-!PREFERENCES_REMEMBERZOOMPAN_TOOLTIP;Remember the zoom % and pan offset of the current image when opening a new image.\n\nThis option only works in "Single Editor Tab Mode" and when "Demosaicing method used for the preview at <100% zoom" is set to "As in PP3".
-!PREFERENCES_SAVE_TP_OPEN_NOW;Save tool collapsed/expanded state now
-!PREFERENCES_SERIALIZE_TIFF_READ;TIFF Read Settings
-!PREFERENCES_SERIALIZE_TIFF_READ_LABEL;Serialize reading of TIFF files
-!PREFERENCES_SERIALIZE_TIFF_READ_TOOLTIP;Enabling this option when working with folders containing uncompressed TIFF files can increase performance of thumbnail generation.
-!PREFERENCES_SET;Set
-!PREFERENCES_SHOWEXPOSURECOMPENSATION;Append exposure compensation
-!PREFERENCES_SHOWFILMSTRIPTOOLBAR;Show Filmstrip toolbar
-!PREFERENCES_SINGLETAB;Single Editor Tab Mode
-!PREFERENCES_SINGLETABVERTAB;Single Editor Tab Mode, Vertical Tabs
-!PREFERENCES_SND_BATCHQUEUEDONE;Queue processing done
-!PREFERENCES_SND_HELP;Enter a full file path to set a sound, or leave blank for no sound.\nFor system sounds on Windows use "SystemDefault", "SystemAsterisk" etc., and on Linux use "complete", "window-attention" etc.
-!PREFERENCES_SND_LNGEDITPROCDONE;Editor processing done
-!PREFERENCES_SND_THRESHOLDSECS;After seconds
-!PREFERENCES_TAB_DYNAMICPROFILE;Dynamic Profile Rules
-!PREFERENCES_TAB_PERFORMANCE;Performance
-!PREFERENCES_TAB_SOUND;Sounds
-!PREFERENCES_THUMBNAIL_INSPECTOR_JPEG;Embedded JPEG preview
-!PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TP_LABEL;Tool panel:
-!PREFERENCES_TP_VSCROLLBAR;Hide vertical scrollbar
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
-!PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-!PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
-!PREFERENCES_WORKFLOW;Layout
-!PROFILEPANEL_COPYPPASTE;Parameters to copy
-!PROFILEPANEL_GLOBALPROFILES;Bundled profiles
-!PROFILEPANEL_LOADPPASTE;Parameters to load
-!PROFILEPANEL_MODE_TIP;Processing profile fill mode.\n\nButton pressed: partial profiles will be converted to full profiles; the missing values will be replaced with hard-coded defaults.\n\nButton released: profiles will be applied as they are, altering only those values which they contain.
-!PROFILEPANEL_MYPROFILES;My profiles
-!PROFILEPANEL_PASTEPPASTE;Parameters to paste
-!PROFILEPANEL_PDYNAMIC;Dynamic
-!PROFILEPANEL_PINTERNAL;Neutral
-!PROFILEPANEL_SAVEPPASTE;Parameters to save
-!PROGRESSBAR_DECODING;Decoding...
-!PROGRESSBAR_GREENEQUIL;Green equilibration...
-!PROGRESSBAR_HLREC;Highlight reconstruction...
-!PROGRESSBAR_HOTDEADPIXELFILTER;Hot/dead pixel filter...
-!PROGRESSBAR_LINEDENOISE;Line noise filter...
-!PROGRESSBAR_LOADINGTHUMBS;Loading thumbnails...
-!PROGRESSBAR_NOIMAGES;No images found
-!PROGRESSBAR_PROCESSING_PROFILESAVED;Processing profile saved
-!PROGRESSBAR_RAWCACORR;Raw CA correction...
-!PROGRESSBAR_SNAPSHOT_ADDED;Snapshot added
-!PROGRESSDLG_PROFILECHANGEDINBROWSER;Processing profile changed in browser
-!QINFO_FRAMECOUNT;%2 frames
-!QINFO_HDR;HDR / %2 frame(s)
-!QINFO_PIXELSHIFT;Pixel Shift / %2 frame(s)
-!SAMPLEFORMAT_0;Unknown data format
-!SAMPLEFORMAT_1;8-bit unsigned
-!SAMPLEFORMAT_2;16-bit unsigned
-!SAMPLEFORMAT_4;24-bit LogLuv
-!SAMPLEFORMAT_8;32-bit LogLuv
-!SAMPLEFORMAT_16;16-bit floating-point
-!SAMPLEFORMAT_32;24-bit floating-point
-!SAMPLEFORMAT_64;32-bit floating-point
-!SAVEDLG_AUTOSUFFIX;Automatically add a suffix if the file already exists
-!SAVEDLG_FILEFORMAT_FLOAT; floating-point
-!SAVEDLG_FORCEFORMATOPTS;Force saving options
-!SAVEDLG_SUBSAMP;Subsampling
-!SAVEDLG_SUBSAMP_1;Best compression
-!SAVEDLG_SUBSAMP_2;Balanced
-!SAVEDLG_SUBSAMP_3;Best quality
-!SAVEDLG_SUBSAMP_TOOLTIP;Best compression:\nJ:a:b 4:2:0\nh/v 2/2\nChroma halved horizontally and vertically.\n\nBalanced:\nJ:a:b 4:2:2\nh/v 2/1\nChroma halved horizontally.\n\nBest quality:\nJ:a:b 4:4:4\nh/v 1/1\nNo chroma subsampling.
-!SAVEDLG_TIFFUNCOMPRESSED;Uncompressed TIFF
-!SAVEDLG_WARNFILENAME;File will be named
-!SHCSELECTOR_TOOLTIP;Click right mouse button to reset the position of those 3 sliders.
-!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
-!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!THRESHOLDSELECTOR_B;Bottom
-!THRESHOLDSELECTOR_BL;Bottom-left
-!THRESHOLDSELECTOR_BR;Bottom-right
-!THRESHOLDSELECTOR_HINT;Hold the Shift key to move individual control points.
-!THRESHOLDSELECTOR_T;Top
-!THRESHOLDSELECTOR_TL;Top-left
-!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
-!TP_BWMIX_ALGO;Algorithm OYCPM
-!TP_BWMIX_ALGO_LI;Linear
-!TP_BWMIX_ALGO_SP;Special effects
-!TP_BWMIX_ALGO_TOOLTIP;Linear: will produce a normal linear response.\nSpecial effects: will produce special effects by mixing channels non-linearly.
-!TP_BWMIX_AUTOCH;Auto
-!TP_BWMIX_CC_ENABLED;Adjust complementary color
-!TP_BWMIX_CC_TOOLTIP;Enable to allow automatic adjustment of complementary colors in ROYGCBPM mode.
-!TP_BWMIX_CHANNEL;Luminance equalizer
-!TP_BWMIX_CURVEEDITOR1;'Before' curve
-!TP_BWMIX_CURVEEDITOR2;'After' curve
-!TP_BWMIX_CURVEEDITOR_AFTER_TOOLTIP;Tone curve, after B&W conversion, at the end of treatment.
-!TP_BWMIX_CURVEEDITOR_BEFORE_TOOLTIP;Tone curve, just before B&W conversion.\nMay take into account the color components.
-!TP_BWMIX_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H).\nPay attention to extreme values as they may cause artifacts.
-!TP_BWMIX_FILTER;Color Filter
-!TP_BWMIX_FILTER_BLUE;Blue
-!TP_BWMIX_FILTER_BLUEGREEN;Blue-Green
-!TP_BWMIX_FILTER_GREEN;Green
-!TP_BWMIX_FILTER_GREENYELLOW;Green-Yellow
-!TP_BWMIX_FILTER_NONE;None
-!TP_BWMIX_FILTER_PURPLE;Purple
-!TP_BWMIX_FILTER_RED;Red
-!TP_BWMIX_FILTER_REDYELLOW;Red-Yellow
-!TP_BWMIX_FILTER_TOOLTIP;The color filter simulates shots taken with a colored filter placed in front of the lens. Colored filters reduce the transmission of specific color ranges and therefore affect their lightness. E.g. a red filter darkens blue skies.
-!TP_BWMIX_FILTER_YELLOW;Yellow
-!TP_BWMIX_GAMMA;Gamma Correction
-!TP_BWMIX_GAM_TOOLTIP;Correct gamma for each RGB channel.
-!TP_BWMIX_LABEL;Black-and-White
-!TP_BWMIX_MET;Method
-!TP_BWMIX_MET_CHANMIX;Channel Mixer
-!TP_BWMIX_MET_DESAT;Desaturation
-!TP_BWMIX_MET_LUMEQUAL;Luminance Equalizer
-!TP_BWMIX_MIXC;Channel Mixer
-!TP_BWMIX_NEUTRAL;Reset
-!TP_BWMIX_RGBLABEL;R: %1%% G: %2%% B: %3%% Total: %4%%
-!TP_BWMIX_RGBLABEL_HINT;Final RGB factors that take care of all the mixer options.\n"Total" displays the sum of the RGB values:\n- always 100% in relative mode\n- higher (lighter) or lower (darker) than 100% in absolute mode.
-!TP_BWMIX_RGB_TOOLTIP;Mix the RGB channels. Use presets for guidance.\nPay attention to negative values that may cause artifacts or erratic behavior.
-!TP_BWMIX_SETTING;Presets
-!TP_BWMIX_SETTING_TOOLTIP;Different presets (film, landscape, etc.) or manual Channel Mixer settings.
-!TP_BWMIX_SET_HIGHCONTAST;High contrast
-!TP_BWMIX_SET_HIGHSENSIT;High Sensitivity
-!TP_BWMIX_SET_HYPERPANCHRO;Hyper Panchromatic
-!TP_BWMIX_SET_INFRARED;Infrared
-!TP_BWMIX_SET_LANDSCAPE;Landscape
-!TP_BWMIX_SET_LOWSENSIT;Low Sensitivity
-!TP_BWMIX_SET_LUMINANCE;Luminance
-!TP_BWMIX_SET_NORMCONTAST;Normal Contrast
-!TP_BWMIX_SET_ORTHOCHRO;Orthochromatic
-!TP_BWMIX_SET_PANCHRO;Panchromatic
-!TP_BWMIX_SET_PORTRAIT;Portrait
-!TP_BWMIX_SET_RGBABS;Absolute RGB
-!TP_BWMIX_SET_RGBREL;Relative RGB
-!TP_BWMIX_SET_ROYGCBPMABS;Absolute ROYGCBPM
-!TP_BWMIX_SET_ROYGCBPMREL;Relative ROYGCBPM
-!TP_BWMIX_TCMODE_FILMLIKE;B&W Film-like
-!TP_BWMIX_TCMODE_SATANDVALBLENDING;B&W Saturation and Value Blending
-!TP_BWMIX_TCMODE_STANDARD;B&W Standard
-!TP_BWMIX_TCMODE_WEIGHTEDSTD;B&W Weighted Standard
-!TP_BWMIX_VAL;L
-!TP_CBDL_AFT;After Black-and-White
-!TP_CBDL_BEF;Before Black-and-White
-!TP_CBDL_METHOD;Process located
-!TP_CBDL_METHOD_TOOLTIP;Choose whether the Contrast by Detail Levels tool is to be positioned after the Black-and-White tool, which makes it work in L*a*b* space, or before it, which makes it work in RGB space.
-!TP_CHROMATABERR_LABEL;Chromatic Aberration
-!TP_COLORAPP_ABSOLUTELUMINANCE;Absolute luminance
-!TP_COLORAPP_ALGO;Algorithm
-!TP_COLORAPP_ALGO_ALL;All
-!TP_COLORAPP_ALGO_JC;Lightness + Chroma (JC)
-!TP_COLORAPP_ALGO_JS;Lightness + Saturation (JS)
-!TP_COLORAPP_ALGO_QM;Brightness + Colorfulness (QM)
-!TP_COLORAPP_ALGO_TOOLTIP;Lets you choose between parameter subsets or all parameters.
-!TP_COLORAPP_BADPIXSL;Hot/bad pixel filter
-!TP_COLORAPP_BADPIXSL_TOOLTIP;Suppression of hot/bad (brightly colored) pixels.\n0 = No effect\n1 = Median\n2 = Gaussian.\nAlternatively, adjust the image to avoid very dark shadows.\n\nThese artifacts are due to limitations of CIECAM02.
-!TP_COLORAPP_BRIGHT;Brightness (Q)
-!TP_COLORAPP_BRIGHT_TOOLTIP;Brightness in CIECAM02 takes into account the white's luminosity and differs from L*a*b* and RGB brightness.
-!TP_COLORAPP_CAT02ADAPTATION_TOOLTIP;When setting manually, values above 65 are recommended.
-!TP_COLORAPP_CHROMA;Chroma (C)
-!TP_COLORAPP_CHROMA_M;Colorfulness (M)
-!TP_COLORAPP_CHROMA_M_TOOLTIP;Colorfulness in CIECAM02 differs from L*a*b* and RGB colorfulness.
-!TP_COLORAPP_CHROMA_S;Saturation (S)
-!TP_COLORAPP_CHROMA_S_TOOLTIP;Saturation in CIECAM02 differs from L*a*b* and RGB saturation.
-!TP_COLORAPP_CHROMA_TOOLTIP;Chroma in CIECAM02 differs from L*a*b* and RGB chroma.
-!TP_COLORAPP_CIECAT_DEGREE;CAT02 adaptation
-!TP_COLORAPP_CONTRAST;Contrast (J)
-!TP_COLORAPP_CONTRAST_Q;Contrast (Q)
-!TP_COLORAPP_CONTRAST_Q_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CONTRAST_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CURVEEDITOR1;Tone curve 1
-!TP_COLORAPP_CURVEEDITOR1_TOOLTIP;Shows the histogram of L* (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of J or Q after CIECAM02.\n\nJ and Q are not shown in the main histogram panel.\n\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_CURVEEDITOR2;Tone curve 2
-!TP_COLORAPP_CURVEEDITOR2_TOOLTIP;Same usage as with the second exposure tone curve.
-!TP_COLORAPP_CURVEEDITOR3;Color curve
-!TP_COLORAPP_CURVEEDITOR3_TOOLTIP;Adjust either chroma, saturation or colorfulness.\n\nShows the histogram of chromaticity (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of C, s or M after CIECAM02.\n\nC, s and M are not shown in the main histogram panel.\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_DATACIE;CIECAM02 output histograms in curves
-!TP_COLORAPP_DATACIE_TOOLTIP;When enabled, histograms in CIECAM02 curves show approximate values/ranges for J or Q, and C, s or M after the CIECAM02 adjustments.\nThis selection does not impact the main histogram panel.\n\nWhen disabled, histograms in CIECAM02 curves show L*a*b* values before CIECAM02 adjustments.
-!TP_COLORAPP_FREE;Free temp+green + CAT02 + [output]
-!TP_COLORAPP_GAMUT;Gamut control (L*a*b*)
-!TP_COLORAPP_GAMUT_TOOLTIP;Allow gamut control in L*a*b* mode.
-!TP_COLORAPP_HUE;Hue (h)
-!TP_COLORAPP_HUE_TOOLTIP;Hue (h) - angle between 0° and 360°.
-!TP_COLORAPP_LABEL;CIE Color Appearance Model 2002
-!TP_COLORAPP_LABEL_CAM02;Image Adjustments
-!TP_COLORAPP_LABEL_SCENE;Scene Conditions
-!TP_COLORAPP_LABEL_VIEWING;Viewing Conditions
-!TP_COLORAPP_LIGHT;Lightness (J)
-!TP_COLORAPP_LIGHT_TOOLTIP;Lightness in CIECAM02 differs from L*a*b* and RGB lightness.
-!TP_COLORAPP_MEANLUMINANCE;Mean luminance (Yb%)
-!TP_COLORAPP_MODEL;WP Model
-!TP_COLORAPP_MODEL_TOOLTIP;White-Point Model.\n\nWB [RT] + [output]: RT's white balance is used for the scene, CIECAM02 is set to D50, and the output device's white balance is set in Viewing Conditions.\n\nWB [RT+CAT02] + [output]: RT's white balance settings are used by CAT02 and the output device's white balance is set in Viewing Conditions.\n\nFree temp+green + CAT02 + [output]: temp and green are selected by the user, the output device's white balance is set in Viewing Conditions.
-!TP_COLORAPP_NEUTRAL;Reset
-!TP_COLORAPP_NEUTRAL_TIP;Reset all sliders checkbox and curves to their default values
-!TP_COLORAPP_RSTPRO;Red & skin-tones protection
-!TP_COLORAPP_RSTPRO_TOOLTIP;Red & skin-tones protection affects both sliders and curves.
-!TP_COLORAPP_SURROUND;Surround
-!TP_COLORAPP_SURROUND_AVER;Average
-!TP_COLORAPP_SURROUND_DARK;Dark
-!TP_COLORAPP_SURROUND_DIM;Dim
-!TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
-!TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\nAverage: Average light environment (standard). The image will not change.\n\nDim: Dim environment (TV). The image will become slighty dark.\n\nDark: Dark environment (projector). The image will become more dark.\n\nExtremly Dark: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
-!TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
-!TP_COLORAPP_TCMODE_CHROMA;Chroma
-!TP_COLORAPP_TCMODE_COLORF;Colorfulness
-!TP_COLORAPP_TCMODE_LABEL1;Curve mode 1
-!TP_COLORAPP_TCMODE_LABEL2;Curve mode 2
-!TP_COLORAPP_TCMODE_LABEL3;Curve chroma mode
-!TP_COLORAPP_TCMODE_LIGHTNESS;Lightness
-!TP_COLORAPP_TCMODE_SATUR;Saturation
-!TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD50 temp=5003\nD55 temp=5503\nD65 temp=6504\nD75 temp=7504
-!TP_COLORAPP_TONECIE;Tone mapping using CIECAM02
-!TP_COLORAPP_TONECIE_TOOLTIP;If this option is disabled, tone mapping is done in L*a*b* space.\nIf this option is enabled, tone mapping is done using CIECAM02.\nThe Tone Mapping tool must be enabled for this setting to take effect.
-!TP_COLORAPP_VIEWING_ABSOLUTELUMINANCE_TOOLTIP;Absolute luminance of the viewing environment\n(usually 16 cd/m²).
-!TP_COLORAPP_WBCAM;WB [RT+CAT02] + [output]
-!TP_COLORAPP_WBRT;WB [RT] + [output]
-!TP_COLORTONING_AB;o C/L
-!TP_COLORTONING_AUTOSAT;Automatic
-!TP_COLORTONING_BALANCE;Balance
-!TP_COLORTONING_BY;o C/L
-!TP_COLORTONING_CHROMAC;Opacity
-!TP_COLORTONING_COLOR;Color
-!TP_COLORTONING_CURVEEDITOR_CL_TOOLTIP;Chroma opacity as a function of luminance oC=f(L)
-!TP_COLORTONING_HIGHLIGHT;Highlights
-!TP_COLORTONING_HUE;Hue
-!TP_COLORTONING_LAB;L*a*b* blending
-!TP_COLORTONING_LABEL;Color Toning
-!TP_COLORTONING_LABGRID;L*a*b* color correction grid
-!TP_COLORTONING_LABGRID_VALUES;HL: a=%1 b=%2\nS: a=%3 b=%4
-!TP_COLORTONING_LABREGIONS;Color correction regions
-!TP_COLORTONING_LABREGION_ABVALUES;a=%1 b=%2
-!TP_COLORTONING_LABREGION_CHANNEL;Channel
-!TP_COLORTONING_LABREGION_CHANNEL_ALL;All
-!TP_COLORTONING_LABREGION_CHANNEL_B;Blue
-!TP_COLORTONING_LABREGION_CHANNEL_G;Green
-!TP_COLORTONING_LABREGION_CHANNEL_R;Red
-!TP_COLORTONING_LABREGION_CHROMATICITYMASK;C
-!TP_COLORTONING_LABREGION_HUEMASK;H
-!TP_COLORTONING_LABREGION_LIGHTNESS;Lightness
-!TP_COLORTONING_LABREGION_LIGHTNESSMASK;L
-!TP_COLORTONING_LABREGION_LIST_TITLE;Correction
-!TP_COLORTONING_LABREGION_MASK;Mask
-!TP_COLORTONING_LABREGION_MASKBLUR;Mask Blur
-!TP_COLORTONING_LABREGION_OFFSET;Offset
-!TP_COLORTONING_LABREGION_POWER;Power
-!TP_COLORTONING_LABREGION_SATURATION;Saturation
-!TP_COLORTONING_LABREGION_SHOWMASK;Show mask
-!TP_COLORTONING_LABREGION_SLOPE;Slope
-!TP_COLORTONING_LUMA;Luminance
-!TP_COLORTONING_LUMAMODE;Preserve luminance
-!TP_COLORTONING_LUMAMODE_TOOLTIP;If enabled, when you change color (red, green, cyan, blue, etc.) the luminance of each pixel is preserved.
-!TP_COLORTONING_METHOD;Method
-!TP_COLORTONING_METHOD_TOOLTIP;"L*a*b* blending", "RGB sliders" and "RGB curves" use interpolated color blending.\n"Color balance (Shadows/Midtones/Highlights)" and "Saturation 2 colors" use direct colors.\n\nThe Black-and-White tool can be enabled when using any color toning method, which allows for color toning.
-!TP_COLORTONING_MIDTONES;Midtones
-!TP_COLORTONING_NEUTRAL;Reset sliders
-!TP_COLORTONING_NEUTRAL_TIP;Reset all values (Shadows, Midtones, Highlights) to default.
-!TP_COLORTONING_OPACITY;Opacity
-!TP_COLORTONING_RGBCURVES;RGB - Curves
-!TP_COLORTONING_RGBSLIDERS;RGB - Sliders
-!TP_COLORTONING_SA;Saturation Protection
-!TP_COLORTONING_SATURATEDOPACITY;Strength
-!TP_COLORTONING_SATURATIONTHRESHOLD;Threshold
-!TP_COLORTONING_SHADOWS;Shadows
-!TP_COLORTONING_SPLITCO;Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITCOCO;Color Balance Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITLR;Saturation 2 colors
-!TP_COLORTONING_STR;Strength
-!TP_COLORTONING_STRENGTH;Strength
-!TP_COLORTONING_TWO2;Special chroma '2 colors'
-!TP_COLORTONING_TWOALL;Special chroma
-!TP_COLORTONING_TWOBY;Special a* and b*
-!TP_COLORTONING_TWOCOLOR_TOOLTIP;Standard chroma:\nLinear response, a* = b*.\n\nSpecial chroma:\nLinear response, a* = b*, but unbound - try under the diagonal.\n\nSpecial a* and b*:\nLinear response unbound with separate curves for a* and b*. Intended for special effects.\n\nSpecial chroma 2 colors:\nMore predictable.
-!TP_COLORTONING_TWOSTD;Standard chroma
-!TP_CROP_GTEPASSPORT;Biometric Passport
-!TP_CROP_GTFRAME;Frame
-!TP_CROP_GTGRID;Grid
-!TP_CROP_GTHARMMEANS;Harmonic Means
-!TP_CROP_GTTRIANGLE1;Golden Triangles 1
-!TP_CROP_GTTRIANGLE2;Golden Triangles 2
-!TP_CROP_PPI;PPI
-!TP_CROP_RESETCROP;Reset
-!TP_CROP_SELECTCROP;Select
-!TP_DARKFRAME_AUTOSELECT;Auto-selection
-!TP_DARKFRAME_LABEL;Dark-Frame
-!TP_DEFRINGE_LABEL;Defringe
-!TP_DEFRINGE_RADIUS;Radius
-!TP_DEFRINGE_THRESHOLD;Threshold
-!TP_DEHAZE_DEPTH;Depth
-!TP_DEHAZE_LABEL;Haze Removal
-!TP_DEHAZE_SHOW_DEPTH_MAP;Show depth map
-!TP_DEHAZE_STRENGTH;Strength
-!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
-!TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
-!TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominance
-!TP_DIRPYRDENOISE_CHROMINANCE_MANUAL;Manual
-!TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Chrominance - Master
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD;Method
-!TP_DIRPYRDENOISE_CHROMINANCE_METHODADVANCED_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nAutomatic multi-zones\nNo preview - works only during saving, but using the "Preview" method by matching the tile size and center to the preview size and center you can get an idea of the expected results.\nThe image is divided into tiles (about 10 to 70 depending on image size) and each tile receives its own chrominance noise reduction settings.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_PMZ;Preview multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW;Preview
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEWRESIDUAL_INFO_TOOLTIP;Displays the remaining noise levels of the part of the image visible in the preview after wavelet.\n\n>300 Very noisy\n100-300 Noisy\n50-100 A little noisy\n<50 Very low noise\n\nBeware, the values will differ between RGB and L*a*b* mode. The RGB values are less accurate because the RGB mode does not completely separate luminance and chrominance.
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_INFO;Preview size=%1, Center: Px=%2 Py=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Preview noise: Mean=%1 High=%2
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= - High= -
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2 Ty=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
-!TP_DIRPYRDENOISE_LABEL;Noise Reduction
-!TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
-!TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
-!TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Detail recovery
-!TP_DIRPYRDENOISE_LUMINANCE_FRAME;Luminance
-!TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminance
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE;Color space
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;For raw images either RGB or L*a*b* methods can be used.\n\nFor non-raw images the L*a*b* method will be used, regardless of the selection.
-!TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
-!TP_DIRPYRDENOISE_MAIN_GAMMA_TOOLTIP;Gamma varies noise reduction strength across the range of tones. Smaller values will target shadows, while larger values will stretch the effect to the brighter tones.
-!TP_DIRPYRDENOISE_MAIN_MODE;Mode
-!TP_DIRPYRDENOISE_MAIN_MODE_AGGRESSIVE;Aggressive
-!TP_DIRPYRDENOISE_MAIN_MODE_CONSERVATIVE;Conservative
-!TP_DIRPYRDENOISE_MAIN_MODE_TOOLTIP;"Conservative" preserves low frequency chroma patterns, while "aggressive" obliterates them.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD;Median method
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_CHROMINANCE;Chroma only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LABEL;Median Filter
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LUMINANCE;Luminance only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_RGB;RGB
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_TOOLTIP;When using the "Luminance only" and "L*a*b*" methods, median filtering will be performed just after the wavelet step in the noise reduction pipeline.\nWhen using the "RGB" mode, it will be performed at the very end of the noise reduction pipeline.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_WEIGHTED;Weighted L* (little) + a*b* (normal)
-!TP_DIRPYRDENOISE_MEDIAN_PASSES;Median iterations
-!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
-!TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
-!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
-!TP_DIRPYRDENOISE_TYPE_3X3;3×3
-!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
-!TP_DIRPYRDENOISE_TYPE_5X5;5×5
-!TP_DIRPYRDENOISE_TYPE_5X5SOFT;5×5 soft
-!TP_DIRPYRDENOISE_TYPE_7X7;7×7
-!TP_DIRPYRDENOISE_TYPE_9X9;9×9
-!TP_DIRPYREQUALIZER_ALGO;Skin Color Range
-!TP_DIRPYREQUALIZER_ALGO_TOOLTIP;Fine: closer to the colors of the skin, minimizing the action on other colors\nLarge: avoid more artifacts.
-!TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts
-!TP_DIRPYREQUALIZER_HUESKIN;Skin hue
-!TP_DIRPYREQUALIZER_HUESKIN_TOOLTIP;This pyramid is for the upper part, so far as the algorithm at its maximum efficiency.\nTo the lower part, the transition zones.\nIf you need to move the area significantly to the left or right - or if there are artifacts: the white balance is incorrect\nYou can slightly reduce the zone to prevent the rest of the image is affected.
-!TP_DIRPYREQUALIZER_LABEL;Contrast by Detail Levels
-!TP_DIRPYREQUALIZER_LUMACOARSEST;Coarsest
-!TP_DIRPYREQUALIZER_LUMACONTRAST_MINUS;Contrast -
-!TP_DIRPYREQUALIZER_LUMACONTRAST_PLUS;Contrast +
-!TP_DIRPYREQUALIZER_LUMAFINEST;Finest
-!TP_DIRPYREQUALIZER_LUMANEUTRAL;Neutral
-!TP_DIRPYREQUALIZER_SKIN;Skin targetting/protection
-!TP_DIRPYREQUALIZER_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_DIRPYREQUALIZER_THRESHOLD;Threshold
-!TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image.
-!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
-!TP_EPD_EDGESTOPPING;Edge stopping
-!TP_EPD_GAMMA;Gamma
-!TP_EPD_LABEL;Tone Mapping
-!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
-!TP_EPD_SCALE;Scale
-!TP_EPD_STRENGTH;Strength
-!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
-!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
-!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
-!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
-!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
-!TP_EXPOSURE_CURVEEDITOR2;Tone curve 2
-!TP_EXPOSURE_CURVEEDITOR2_TOOLTIP;Please refer to the "Exposure > Tone Curves" RawPedia article to learn how to achieve the best results by using two tone curves.
-!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
-!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
-!TP_EXPOSURE_SATURATION;Saturation
-!TP_EXPOSURE_TCMODE_FILMLIKE;Film-like
-!TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1
-!TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2
-!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
-!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual
-!TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending
-!TP_EXPOSURE_TCMODE_STANDARD;Standard
-!TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard
-!TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points
-!TP_EXPOS_WHITEPOINT_LABEL;Raw White Points
-!TP_FILMSIMULATION_LABEL;Film Simulation
-!TP_FILMSIMULATION_SLOWPARSEDIR;RawTherapee is configured to look for Hald CLUT images, which are used for the Film Simulation tool, in a folder which is taking too long to load.\nGo to Preferences > Image Processing > Film Simulation\nto see which folder is being used. You should either point RawTherapee to a folder which contains only Hald CLUT images and nothing more, or to an empty folder if you don't want to use the Film Simulation tool.\n\nRead the Film Simulation article in RawPedia for more information.\n\nDo you want to cancel the scan now?
-!TP_FILMSIMULATION_STRENGTH;Strength
-!TP_FILMSIMULATION_ZEROCLUTSFOUND;Set HaldCLUT directory in Preferences
-!TP_FLATFIELD_AUTOSELECT;Auto-selection
-!TP_FLATFIELD_BLURRADIUS;Blur radius
-!TP_FLATFIELD_BLURTYPE;Blur type
-!TP_FLATFIELD_BT_AREA;Area
-!TP_FLATFIELD_BT_HORIZONTAL;Horizontal
-!TP_FLATFIELD_BT_VERTHORIZ;Vertical + Horizontal
-!TP_FLATFIELD_BT_VERTICAL;Vertical
-!TP_FLATFIELD_CLIPCONTROL;Clip control
-!TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Clip control avoids clipped highlights caused by applying the flat field. If there are already clipped highlights before applying the flat field, clip control can lead to color cast.
-!TP_FLATFIELD_LABEL;Flat-Field
-!TP_GENERAL_11SCALE_TOOLTIP;The effects of this tool are only visible or only accurate at a preview scale of 1:1.
-!TP_GRADIENT_CENTER;Center
-!TP_GRADIENT_CENTER_X;Center X
-!TP_GRADIENT_CENTER_X_TOOLTIP;Shift gradient to the left (negative values) or right (positive values).
-!TP_GRADIENT_CENTER_Y;Center Y
-!TP_GRADIENT_CENTER_Y_TOOLTIP;Shift gradient up (negative values) or down (positive values).
-!TP_GRADIENT_DEGREE;Angle
-!TP_GRADIENT_DEGREE_TOOLTIP;Rotation angle in degrees.
-!TP_GRADIENT_FEATHER;Feather
-!TP_GRADIENT_FEATHER_TOOLTIP;Gradient width in percent of the image diagonal.
-!TP_GRADIENT_LABEL;Graduated Filter
-!TP_GRADIENT_STRENGTH;Strength
-!TP_GRADIENT_STRENGTH_TOOLTIP;Filter strength in stops.
-!TP_HLREC_BLEND;Blend
-!TP_HLREC_ENA_TOOLTIP;Could be activated by Auto Levels.
-!TP_HSVEQUALIZER_CHANNEL;Channel
-!TP_HSVEQUALIZER_HUE;H
-!TP_HSVEQUALIZER_LABEL;HSV Equalizer
-!TP_HSVEQUALIZER_SAT;S
-!TP_HSVEQUALIZER_VAL;V
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Baseline exposure
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET_TOOLTIP;Employ the embedded DCP baseline exposure offset. The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYHUESATMAP;Base table
-!TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYLOOKTABLE;Look table
-!TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-!TP_ICM_BLENDCMSMATRIX;Blend ICC highlights with matrix
-!TP_ICM_BLENDCMSMATRIX_TOOLTIP;Enable to recover clipped highlights when using LUT-based ICC profiles.
-!TP_ICM_BPC;Black Point Compensation
-!TP_ICM_DCPILLUMINANT;Illuminant
-!TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
-!TP_ICM_DCPILLUMINANT_TOOLTIP;Select which embedded DCP illuminant to employ. Default is "interpolated" which is a mix between the two based on white balance. The setting is only available if a dual-illuminant DCP with interpolation support is selected.
-!TP_ICM_INPUTCAMERAICC;Auto-matched camera profile
-!TP_ICM_INPUTCAMERAICC_TOOLTIP;Use RawTherapee's camera-specific DCP or ICC input color profiles. These profiles are more precise than simpler matrix ones. They are not available for all cameras. These profiles are stored in the /iccprofiles/input and /dcpprofiles folders and are automatically retrieved based on a file name matching to the exact model name of the camera.
-!TP_ICM_INPUTCAMERA_TOOLTIP;Use a simple color matrix from dcraw, an enhanced RawTherapee version (whichever is available based on camera model) or one embedded in the DNG.
-!TP_ICM_INPUTCUSTOM_TOOLTIP;Select your own DCP/ICC color profile file for the camera.
-!TP_ICM_INPUTEMBEDDED_TOOLTIP;Use color profile embedded in non-raw files.
-!TP_ICM_INPUTNONE;No profile
-!TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases.
-!TP_ICM_PROFILEINTENT;Rendering Intent
-!TP_ICM_SAVEREFERENCE;Save Reference Image
-!TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance
-!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles.
-!TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile.
-!TP_ICM_TONECURVE;Tone curve
-!TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only available if the selected DCP has a tone curve.
-!TP_ICM_WORKING_TRC;Tone response curve:
-!TP_ICM_WORKING_TRC_CUSTOM;Custom
-!TP_ICM_WORKING_TRC_GAMMA;Gamma
-!TP_ICM_WORKING_TRC_NONE;None
-!TP_ICM_WORKING_TRC_SLOPE;Slope
-!TP_ICM_WORKING_TRC_TOOLTIP;Only for built-in profiles.
-!TP_IMPULSEDENOISE_LABEL;Impulse Noise Reduction
-!TP_IMPULSEDENOISE_THRESH;Threshold
-!TP_LABCURVE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_LABCURVE_AVOIDCOLORSHIFT_TOOLTIP;Fit colors into gamut of the working color space and apply Munsell correction.
-!TP_LABCURVE_BRIGHTNESS;Lightness
-!TP_LABCURVE_CHROMATICITY;Chromaticity
-!TP_LABCURVE_CHROMA_TOOLTIP;To apply B&W toning, set Chromaticity to -100.
-!TP_LABCURVE_CONTRAST;Contrast
-!TP_LABCURVE_CURVEEDITOR;Luminance Curve
-!TP_LABCURVE_CURVEEDITOR_A_RANGE1;Green Saturated
-!TP_LABCURVE_CURVEEDITOR_A_RANGE2;Green Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE3;Red Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE4;Red Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE1;Blue Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE2;Blue Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE3;Yellow Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE4;Yellow Saturated
-!TP_LABCURVE_CURVEEDITOR_CC;CC
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE1;Neutral
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE2;Dull
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE3;Pastel
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE4;Saturated
-!TP_LABCURVE_CURVEEDITOR_CC_TOOLTIP;Chromaticity according to chromaticity C=f(C)
-!TP_LABCURVE_CURVEEDITOR_CH;CH
-!TP_LABCURVE_CURVEEDITOR_CH_TOOLTIP;Chromaticity according to hue C=f(H)
-!TP_LABCURVE_CURVEEDITOR_CL;CL
-!TP_LABCURVE_CURVEEDITOR_CL_TOOLTIP;Chromaticity according to luminance C=f(L)
-!TP_LABCURVE_CURVEEDITOR_HH;HH
-!TP_LABCURVE_CURVEEDITOR_HH_TOOLTIP;Hue according to hue H=f(H)
-!TP_LABCURVE_CURVEEDITOR_LC;LC
-!TP_LABCURVE_CURVEEDITOR_LC_TOOLTIP;Luminance according to chromaticity L=f(C)
-!TP_LABCURVE_CURVEEDITOR_LH;LH
-!TP_LABCURVE_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H)
-!TP_LABCURVE_CURVEEDITOR_LL_TOOLTIP;Luminance according to luminance L=f(L)
-!TP_LABCURVE_LABEL;L*a*b* Adjustments
-!TP_LABCURVE_LCREDSK;Restrict LC to red and skin-tones
-!TP_LABCURVE_LCREDSK_TIP;If enabled, the LC Curve affects only red and skin-tones.\nIf disabled, it applies to all tones.
-!TP_LABCURVE_RSTPROTECTION;Red and skin-tones protection
-!TP_LABCURVE_RSTPRO_TOOLTIP;Works on the Chromaticity slider and the CC curve.
-!TP_LENSGEOM_AUTOCROP;Auto-Crop
-!TP_LENSGEOM_FILL;Auto-fill
-!TP_LENSGEOM_LABEL;Lens / Geometry
-!TP_LENSPROFILE_CORRECTION_AUTOMATCH;Automatically selected
-!TP_LENSPROFILE_CORRECTION_LCPFILE;LCP file
-!TP_LENSPROFILE_CORRECTION_MANUAL;Manually selected
-!TP_LENSPROFILE_LABEL;Profiled Lens Correction
-!TP_LENSPROFILE_LENS_WARNING;Warning: the crop factor used for lens profiling is larger than the crop factor of the camera, the results might be wrong.
-!TP_LENSPROFILE_MODE_HEADER;Lens Profile
-!TP_LENSPROFILE_USE_CA;Chromatic aberration
-!TP_LENSPROFILE_USE_GEOMETRIC;Geometric distortion
-!TP_LENSPROFILE_USE_HEADER;Correct
-!TP_LENSPROFILE_USE_VIGNETTING;Vignetting
-!TP_LOCALCONTRAST_AMOUNT;Amount
-!TP_LOCALCONTRAST_DARKNESS;Darkness level
-!TP_LOCALCONTRAST_LABEL;Local Contrast
-!TP_LOCALCONTRAST_LIGHTNESS;Lightness level
-!TP_LOCALCONTRAST_RADIUS;Radius
-!TP_METADATA_EDIT;Apply modifications
-!TP_METADATA_MODE;Metadata copy mode
-!TP_METADATA_STRIP;Strip all metadata
-!TP_METADATA_TUNNEL;Copy unchanged
-!TP_NEUTRAL;Reset
-!TP_NEUTRAL_TIP;Resets exposure sliders to neutral values.\nApplies to the same controls that Auto Levels applies to, regardless of whether you used Auto Levels or not.
-!TP_PCVIGNETTE_FEATHER;Feather
-!TP_PCVIGNETTE_FEATHER_TOOLTIP;Feathering:\n0 = corners only,\n50 = halfway to center,\n100 = to center.
-!TP_PCVIGNETTE_LABEL;Vignette Filter
-!TP_PCVIGNETTE_ROUNDNESS;Roundness
-!TP_PCVIGNETTE_ROUNDNESS_TOOLTIP;Roundness:\n0 = rectangle,\n50 = fitted ellipse,\n100 = circle.
-!TP_PCVIGNETTE_STRENGTH;Strength
-!TP_PCVIGNETTE_STRENGTH_TOOLTIP;Filter strength in stops (reached in corners).
-!TP_PERSPECTIVE_HORIZONTAL;Horizontal
-!TP_PERSPECTIVE_LABEL;Perspective
-!TP_PERSPECTIVE_VERTICAL;Vertical
-!TP_PFCURVE_CURVEEDITOR_CH;Hue
-!TP_PFCURVE_CURVEEDITOR_CH_TOOLTIP;Controls defringe strength by color.\nHigher = more,\nLower = less.
-!TP_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!TP_PREPROCESS_DEADPIXFILT_TOOLTIP;Tries to suppress dead pixels.
-!TP_PREPROCESS_GREENEQUIL;Green equilibration
-!TP_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!TP_PREPROCESS_HOTPIXFILT_TOOLTIP;Tries to suppress hot pixels.
-!TP_PREPROCESS_LABEL;Preprocessing
-!TP_PREPROCESS_LINEDENOISE;Line noise filter
-!TP_PREPROCESS_LINEDENOISE_DIRECTION;Direction
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_BOTH;Both
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_HORIZONTAL;Horizontal
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_PDAF_LINES;Horizontal only on PDAF rows
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_VERTICAL;Vertical
-!TP_PREPROCESS_NO_FOUND;None found
-!TP_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!TP_PRSHARPENING_LABEL;Post-Resize Sharpening
-!TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions.
-!TP_RAWCACORR_AUTO;Auto-correction
-!TP_RAWCACORR_AUTOIT;Iterations
-!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
-!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CABLUE;Blue
-!TP_RAWCACORR_CARED;Red
-!TP_RAWCACORR_CASTR;Strength
-!TP_RAWEXPOS_BLACKS;Black Levels
-!TP_RAWEXPOS_BLACK_0;Green 1 (lead)
-!TP_RAWEXPOS_BLACK_1;Red
-!TP_RAWEXPOS_BLACK_2;Blue
-!TP_RAWEXPOS_BLACK_3;Green 2
-!TP_RAWEXPOS_BLACK_BLUE;Blue
-!TP_RAWEXPOS_BLACK_GREEN;Green
-!TP_RAWEXPOS_BLACK_RED;Red
-!TP_RAWEXPOS_LINEAR;White-point correction
-!TP_RAWEXPOS_RGB;Red, Green, Blue
-!TP_RAWEXPOS_TWOGREEN;Link greens
-!TP_RAW_1PASSMEDIUM;1-pass (Markesteijn)
-!TP_RAW_2PASS;1-pass+fast
-!TP_RAW_3PASSBEST;3-pass (Markesteijn)
-!TP_RAW_4PASS;3-pass+fast
-!TP_RAW_AHD;AHD
-!TP_RAW_AMAZE;AMaZE
-!TP_RAW_AMAZEVNG4;AMaZE+VNG4
-!TP_RAW_BORDER;Border
-!TP_RAW_DCB;DCB
-!TP_RAW_DCBENHANCE;DCB enhancement
-!TP_RAW_DCBITERATIONS;Number of DCB iterations
-!TP_RAW_DCBVNG4;DCB+VNG4
-!TP_RAW_DMETHOD_PROGRESSBAR;%1 demosaicing...
-!TP_RAW_DMETHOD_PROGRESSBAR_REFINE;Demosaicing refinement...
-!TP_RAW_DMETHOD_TOOLTIP;Note: IGV and LMMSE are dedicated to high ISO images to aid in noise reduction without leading to maze patterns, posterization or a washed-out look.\nPixel Shift is for Pentax/Sony Pixel Shift files. It falls back to AMaZE for non-Pixel Shift files.
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST;Auto threshold
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST_TOOLTIP;If the checkbox is checked (recommended), RawTherapee calculates an optimum value based on flat regions in the image.\nIf there is no flat region in the image or the image is too noisy, the value will be set to 0.\nTo set the value manually, uncheck the checkbox first (reasonable values depend on the image).
-!TP_RAW_DUALDEMOSAICCONTRAST;Contrast threshold
-!TP_RAW_EAHD;EAHD
-!TP_RAW_FAST;Fast
-!TP_RAW_HD;Threshold
-!TP_RAW_HD_TOOLTIP;Lower values make hot/dead pixel detection more aggressive, but false positives may lead to artifacts. If you notice any artifacts appearing when enabling the Hot/Dead Pixel Filters, gradually increase the threshold value until they disappear.
-!TP_RAW_HPHD;HPHD
-!TP_RAW_IGV;IGV
-!TP_RAW_IMAGENUM;Sub-image
-!TP_RAW_IMAGENUM_SN;SN mode
-!TP_RAW_IMAGENUM_TOOLTIP;Some raw files consist of several sub-images (Pentax/Sony Pixel Shift, Pentax 3-in-1 HDR, Canon Dual Pixel, Fuji EXR).\n\nWhen using any demosaicing method other than Pixel Shift, this selects which sub-image is used.\n\nWhen using the Pixel Shift demosaicing method on a Pixel Shift raw, all sub-images are used, and this selects which sub-image should be used for moving parts.
-!TP_RAW_LABEL;Demosaicing
-!TP_RAW_LMMSE;LMMSE
-!TP_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!TP_RAW_LMMSE_TOOLTIP;Adds gamma (step 1), median (steps 2-4) and refinement (steps 5-6) to reduce artifacts and improve the signal-to-noise ratio.
-!TP_RAW_MONO;Mono
-!TP_RAW_NONE;None (Shows sensor pattern)
-!TP_RAW_PIXELSHIFT;Pixel Shift
-!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
-!TP_RAW_PIXELSHIFTDMETHOD;Demosaic method for motion
-!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
-!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
-!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
-!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
-!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
-!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
-!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
-!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
-!TP_RAW_PIXELSHIFTMM_OFF;Off
-!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
-!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
-!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
-!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
-!TP_RAW_PIXELSHIFTSIGMA;Blur radius
-!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
-!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
-!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
-!TP_RAW_RCD;RCD
-!TP_RAW_RCDVNG4;RCD+VNG4
-!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
-!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.\n+fast gives less artifacts in flat areas
-!TP_RAW_SENSOR_XTRANS_LABEL;Sensor with X-Trans Matrix
-!TP_RAW_VNG4;VNG4
-!TP_RAW_XTRANS;X-Trans
-!TP_RAW_XTRANSFAST;Fast X-Trans
-!TP_RESIZE_ALLOW_UPSCALING;Allow Upscaling
-!TP_RESIZE_APPLIESTO;Applies to:
-!TP_RESIZE_CROPPEDAREA;Cropped Area
-!TP_RESIZE_FITBOX;Bounding Box
-!TP_RESIZE_FULLIMAGE;Full Image
-!TP_RESIZE_HEIGHT;Height
-!TP_RESIZE_LANCZOS;Lanczos
-!TP_RESIZE_SPECIFY;Specify:
-!TP_RESIZE_WIDTH;Width
-!TP_RETINEX_CONTEDIT_HSL;HSL histogram
-!TP_RETINEX_CONTEDIT_LAB;L*a*b* histogram
-!TP_RETINEX_CONTEDIT_LH;Hue
-!TP_RETINEX_CONTEDIT_MAP;Equalizer
-!TP_RETINEX_CURVEEDITOR_CD;L=f(L)
-!TP_RETINEX_CURVEEDITOR_CD_TOOLTIP;Luminance according to luminance L=f(L)\nCorrect raw data to reduce halos and artifacts.
-!TP_RETINEX_CURVEEDITOR_LH;Strength=f(H)
-!TP_RETINEX_CURVEEDITOR_LH_TOOLTIP;Strength according to hue Strength=f(H)\nThis curve also acts on chroma when using the "Highlight" retinex method.
-!TP_RETINEX_CURVEEDITOR_MAP;L=f(L)
-!TP_RETINEX_CURVEEDITOR_MAP_TOOLTIP;This curve can be applied alone or with a Gaussian mask or wavelet mask.\nBeware of artifacts!
-!TP_RETINEX_EQUAL;Equalizer
-!TP_RETINEX_FREEGAMMA;Free gamma
-!TP_RETINEX_GAIN;Gain
-!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
-!TP_RETINEX_GAINTRANSMISSION;Gain transmission
-!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
-!TP_RETINEX_GAMMA;Gamma
-!TP_RETINEX_GAMMA_FREE;Free
-!TP_RETINEX_GAMMA_HIGH;High
-!TP_RETINEX_GAMMA_LOW;Low
-!TP_RETINEX_GAMMA_MID;Middle
-!TP_RETINEX_GAMMA_NONE;None
-!TP_RETINEX_GAMMA_TOOLTIP;Restore tones by applying gamma before and after Retinex. Different from Retinex curves or others curves (Lab, Exposure, etc.).
-!TP_RETINEX_GRAD;Transmission gradient
-!TP_RETINEX_GRADS;Strength gradient
-!TP_RETINEX_GRADS_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Strength is reduced when iterations increase, and conversely.
-!TP_RETINEX_GRAD_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Variance and Threshold are reduced when iterations increase, and conversely.
-!TP_RETINEX_HIGH;High
-!TP_RETINEX_HIGHLIG;Highlight
-!TP_RETINEX_HIGHLIGHT;Highlight threshold
-!TP_RETINEX_HIGHLIGHT_TOOLTIP;Increase action of High algorithm.\nMay require you to re-adjust "Neighboring pixels" and to increase the "White-point correction" in the Raw tab -> Raw White Points tool.
-!TP_RETINEX_HSLSPACE_LIN;HSL-Linear
-!TP_RETINEX_HSLSPACE_LOG;HSL-Logarithmic
-!TP_RETINEX_ITER;Iterations (Tone-mapping)
-!TP_RETINEX_ITERF;Tone mapping
-!TP_RETINEX_ITER_TOOLTIP;Simulate a tone-mapping operator.\nHigh values increase the processing time.
-!TP_RETINEX_LABEL;Retinex
-!TP_RETINEX_LABEL_MASK;Mask
-!TP_RETINEX_LABSPACE;L*a*b*
-!TP_RETINEX_LOW;Low
-!TP_RETINEX_MAP;Method
-!TP_RETINEX_MAP_GAUS;Gaussian mask
-!TP_RETINEX_MAP_MAPP;Sharp mask (wavelet partial)
-!TP_RETINEX_MAP_MAPT;Sharp mask (wavelet total)
-!TP_RETINEX_MAP_METHOD_TOOLTIP;Use the mask generated by the Gaussian function above (Radius, Method) to reduce halos and artifacts.\n\nCurve only: apply a diagonal contrast curve on the mask.\nBeware of artifacts!\n\nGaussian mask: generate and use a Gaussian blur of the original mask.\nQuick.\n\nSharp mask: generate and use a wavelet on the original mask.\nSlow.
-!TP_RETINEX_MAP_NONE;None
-!TP_RETINEX_MEDIAN;Transmission median filter
-!TP_RETINEX_METHOD;Method
-!TP_RETINEX_METHOD_TOOLTIP;Low = Reinforce low light.\nUniform = Equalize action.\nHigh = Reinforce high light.\nHighlights = Remove magenta in highlights.
-!TP_RETINEX_MLABEL;Restored haze-free Min=%1 Max=%2
-!TP_RETINEX_MLABEL_TOOLTIP;Should be near min=0 max=32768\nRestored image with no mixture.
-!TP_RETINEX_NEIGHBOR;Radius
-!TP_RETINEX_NEUTRAL;Reset
-!TP_RETINEX_NEUTRAL_TIP;Reset all sliders and curves to their default values.
-!TP_RETINEX_OFFSET;Offset (brightness)
-!TP_RETINEX_SCALES;Gaussian gradient
-!TP_RETINEX_SCALES_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Scale and radius are reduced when iterations increase, and conversely.
-!TP_RETINEX_SETTINGS;Settings
-!TP_RETINEX_SKAL;Scale
-!TP_RETINEX_SLOPE;Free gamma slope
-!TP_RETINEX_STRENGTH;Strength
-!TP_RETINEX_THRESHOLD;Threshold
-!TP_RETINEX_THRESHOLD_TOOLTIP;Limits in/out.\nIn = image source,\nOut = image gauss.
-!TP_RETINEX_TLABEL;TM Min=%1 Max=%2 Mean=%3 Sigma=%4
-!TP_RETINEX_TLABEL2;TM Tm=%1 TM=%2
-!TP_RETINEX_TLABEL_TOOLTIP;Transmission map result.\nMin and Max are used by Variance.\nMean and Sigma.\nTm=Min TM=Max of transmission map.
-!TP_RETINEX_TRANF;Transmission
-!TP_RETINEX_TRANSMISSION;Transmission map
-!TP_RETINEX_TRANSMISSION_TOOLTIP;Transmission according to transmission.\nAbscissa: transmission from negative values (min), mean, and positives values (max).\nOrdinate: amplification or reduction.
-!TP_RETINEX_UNIFORM;Uniform
-!TP_RETINEX_VARIANCE;Contrast
-!TP_RETINEX_VARIANCE_TOOLTIP;Low variance increase local contrast and saturation, but can lead to artifacts.
-!TP_RETINEX_VIEW;Process
-!TP_RETINEX_VIEW_MASK;Mask
-!TP_RETINEX_VIEW_METHOD_TOOLTIP;Standard - Normal display.\nMask - Displays the mask.\nUnsharp mask - Displays the image with a high radius unsharp mask.\nTransmission - Auto/Fixed - Displays the file transmission-map, before any action on contrast and brightness.\n\nAttention: the mask does not correspond to reality, but is amplified to make it more visible.
-!TP_RETINEX_VIEW_NONE;Standard
-!TP_RETINEX_VIEW_TRAN;Transmission - Auto
-!TP_RETINEX_VIEW_TRAN2;Transmission - Fixed
-!TP_RETINEX_VIEW_UNSHARP;Unsharp mask
-!TP_RGBCURVES_BLUE;B
-!TP_RGBCURVES_CHANNEL;Channel
-!TP_RGBCURVES_GREEN;G
-!TP_RGBCURVES_LABEL;RGB Curves
-!TP_RGBCURVES_LUMAMODE;Luminosity mode
-!TP_RGBCURVES_LUMAMODE_TOOLTIP;Luminosity mode allows to vary the contribution of R, G and B channels to the luminosity of the image, without altering image color.
-!TP_RGBCURVES_RED;R
-!TP_SAVEDIALOG_OK_TIP;Shortcut: Ctrl-Enter
-!TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
-!TP_SHARPENEDGE_AMOUNT;Quantity
-!TP_SHARPENEDGE_LABEL;Edges
-!TP_SHARPENEDGE_PASSES;Iterations
-!TP_SHARPENEDGE_THREE;Luminance only
-!TP_SHARPENING_BLUR;Blur radius
-!TP_SHARPENING_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_AMOUNT;Quantity
-!TP_SHARPENMICRO_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_LABEL;Microcontrast
-!TP_SHARPENMICRO_MATRIX;3×3 matrix instead of 5×5
-!TP_SHARPENMICRO_UNIFORMITY;Uniformity
-!TP_SOFTLIGHT_LABEL;Soft Light
-!TP_SOFTLIGHT_STRENGTH;Strength
-!TP_TM_FATTAL_AMOUNT;Amount
-!TP_TM_FATTAL_ANCHOR;Anchor
-!TP_TM_FATTAL_LABEL;Dynamic Range Compression
-!TP_TM_FATTAL_THRESHOLD;Detail
-!TP_VIBRANCE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES;HH
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_LABEL;Skin-tones
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE1;Red/Purple
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE2;Red
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE3;Red/Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE4;Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_TOOLTIP;Hue according to hue H=f(H)
-!TP_VIBRANCE_LABEL;Vibrance
-!TP_VIBRANCE_PASTELS;Pastel Tones
-!TP_VIBRANCE_PASTSATTOG;Link pastel and saturated tones
-!TP_VIBRANCE_PROTECTSKINS;Protect skin-tones
-!TP_VIBRANCE_PSTHRESHOLD;Pastel/saturated tones threshold
-!TP_VIBRANCE_PSTHRESHOLD_SATTHRESH;Saturation threshold
-!TP_VIBRANCE_PSTHRESHOLD_TOOLTIP;The vertical axis represents pastel tones at the bottom and saturated tones at the top.\nThe horizontal axis represents the saturation range.
-!TP_VIBRANCE_PSTHRESHOLD_WEIGTHING;Pastel/saturated transition's weighting
-!TP_VIBRANCE_SATURATED;Saturated Tones
-!TP_VIGNETTING_CENTER;Center
-!TP_VIGNETTING_CENTER_X;Center X
-!TP_VIGNETTING_CENTER_Y;Center Y
-!TP_VIGNETTING_STRENGTH;Strength
-!TP_WAVELET_1;Level 1
-!TP_WAVELET_2;Level 2
-!TP_WAVELET_3;Level 3
-!TP_WAVELET_4;Level 4
-!TP_WAVELET_5;Level 5
-!TP_WAVELET_6;Level 6
-!TP_WAVELET_7;Level 7
-!TP_WAVELET_8;Level 8
-!TP_WAVELET_9;Level 9
-!TP_WAVELET_APPLYTO;Apply To
-!TP_WAVELET_AVOID;Avoid color shift
-!TP_WAVELET_B0;Black
-!TP_WAVELET_B1;Grey
-!TP_WAVELET_B2;Residual
-!TP_WAVELET_BACKGROUND;Background
-!TP_WAVELET_BACUR;Curve
-!TP_WAVELET_BALANCE;Contrast balance d/v-h
-!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified.
-!TP_WAVELET_BALCHRO;Chroma balance
-!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance.
-!TP_WAVELET_BANONE;None
-!TP_WAVELET_BASLI;Slider
-!TP_WAVELET_BATYPE;Contrast balance method
-!TP_WAVELET_CBENAB;Toning and Color Balance
-!TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted
-!TP_WAVELET_CCURVE;Local contrast
-!TP_WAVELET_CH1;Whole chroma range
-!TP_WAVELET_CH2;Saturated/pastel
-!TP_WAVELET_CH3;Link contrast levels
-!TP_WAVELET_CHCU;Curve
-!TP_WAVELET_CHR;Chroma-contrast link strength
-!TP_WAVELET_CHRO;Saturated/pastel threshold
-!TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored.
-!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength"
-!TP_WAVELET_CHSL;Sliders
-!TP_WAVELET_CHTYPE;Chrominance method
-!TP_WAVELET_COLORT;Opacity Red-Green
-!TP_WAVELET_COMPCONT;Contrast
-!TP_WAVELET_COMPGAMMA;Compression gamma
-!TP_WAVELET_COMPGAMMA_TOOLTIP;Adjusting the gamma of the residual image allows you to equilibrate the data and histogram.
-!TP_WAVELET_COMPTM;Tone mapping
-!TP_WAVELET_CONTEDIT;'After' contrast curve
-!TP_WAVELET_CONTR;Gamut
-!TP_WAVELET_CONTRA;Contrast
-!TP_WAVELET_CONTRAST_MINUS;Contrast -
-!TP_WAVELET_CONTRAST_PLUS;Contrast +
-!TP_WAVELET_CONTRA_TOOLTIP;Changes contrast of the residual image.
-!TP_WAVELET_CTYPE;Chrominance control
-!TP_WAVELET_CURVEEDITOR_CC_TOOLTIP;Modifies local contrast as a function of the original local contrast (abscissa).\nLow abscissa values represent small local contrast (real values about 10..20).\n50% abscissa represents average local contrast (real value about 100..300).\n66% abscissa represents standard deviation of local contrast (real value about 300..800).\n100% abscissa represents maximum local contrast (real value about 3000..8000).
-!TP_WAVELET_CURVEEDITOR_CH;Contrast levels=f(Hue)
-!TP_WAVELET_CURVEEDITOR_CH_TOOLTIP;Modifies each level's contrast as a function of hue.\nTake care not to overwrite changes made with the Gamut sub-tool's hue controls.\nThe curve will only have an effect when wavelet contrast level sliders are non-zero.
-!TP_WAVELET_CURVEEDITOR_CL;L
-!TP_WAVELET_CURVEEDITOR_CL_TOOLTIP;Applies a final contrast luminance curve at the end of the wavelet treatment.
-!TP_WAVELET_CURVEEDITOR_HH;HH
-!TP_WAVELET_CURVEEDITOR_HH_TOOLTIP;Modifies the residual image's hue as a function of hue.
-!TP_WAVELET_DALL;All directions
-!TP_WAVELET_DAUB;Edge performance
-!TP_WAVELET_DAUB2;D2 - low
-!TP_WAVELET_DAUB4;D4 - standard
-!TP_WAVELET_DAUB6;D6 - standard plus
-!TP_WAVELET_DAUB10;D10 - medium
-!TP_WAVELET_DAUB14;D14 - high
-!TP_WAVELET_DAUB_TOOLTIP;Changes Daubechies coefficients:\nD4 = Standard,\nD14 = Often best performance, 10% more time-intensive.\n\nAffects edge detection as well as the general quality of the firsts levels. However the quality is not strictly related to this coefficient and can vary with images and uses.
-!TP_WAVELET_DONE;Vertical
-!TP_WAVELET_DTHR;Diagonal
-!TP_WAVELET_DTWO;Horizontal
-!TP_WAVELET_EDCU;Curve
-!TP_WAVELET_EDGCONT;Local contrast
-!TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, top-left, top-right and bottom-right represent respectively local contrast for low values, mean, mean+stdev and maxima.
-!TP_WAVELET_EDGE;Edge Sharpness
-!TP_WAVELET_EDGEAMPLI;Base amplification
-!TP_WAVELET_EDGEDETECT;Gradient sensitivity
-!TP_WAVELET_EDGEDETECTTHR;Threshold low (noise)
-!TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection)
-!TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky.
-!TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise.
-!TP_WAVELET_EDGESENSI;Edge sensitivity
-!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
-!TP_WAVELET_EDGTHRESH;Detail
-!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
-!TP_WAVELET_EDRAD;Radius
-!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
-!TP_WAVELET_EDSL;Threshold Sliders
-!TP_WAVELET_EDTYPE;Local contrast method
-!TP_WAVELET_EDVAL;Strength
-!TP_WAVELET_FINAL;Final Touchup
-!TP_WAVELET_FINEST;Finest
-!TP_WAVELET_HIGHLIGHT;Highlight luminance range
-!TP_WAVELET_HS1;Whole luminance range
-!TP_WAVELET_HS2;Shadows/Highlights
-!TP_WAVELET_HUESKIN;Skin hue
-!TP_WAVELET_HUESKIN_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_HUESKY;Sky hue
-!TP_WAVELET_HUESKY_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_ITER;Delta balance levels
-!TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels.
-!TP_WAVELET_LABEL;Wavelet Levels
-!TP_WAVELET_LARGEST;Coarsest
-!TP_WAVELET_LEVCH;Chroma
-!TP_WAVELET_LEVDIR_ALL;All levels in all directions
-!TP_WAVELET_LEVDIR_INF;Below or equal the level
-!TP_WAVELET_LEVDIR_ONE;One level
-!TP_WAVELET_LEVDIR_SUP;Above the level
-!TP_WAVELET_LEVELS;Wavelet levels
-!TP_WAVELET_LEVELS_TOOLTIP;Choose the number of detail levels the image is to be decomposed into. More levels require more RAM and require a longer processing time.
-!TP_WAVELET_LEVF;Contrast
-!TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1
-!TP_WAVELET_LEVONE;Level 2
-!TP_WAVELET_LEVTHRE;Level 4
-!TP_WAVELET_LEVTWO;Level 3
-!TP_WAVELET_LEVZERO;Level 1
-!TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength
-!TP_WAVELET_LIPST;Enhanced algoritm
-!TP_WAVELET_LOWLIGHT;Shadow luminance range
-!TP_WAVELET_MEDGREINF;First level
-!TP_WAVELET_MEDI;Reduce artifacts in blue sky
-!TP_WAVELET_MEDILEV;Edge detection
-!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine.
-!TP_WAVELET_NEUTRAL;Neutral
-!TP_WAVELET_NOIS;Denoise
-!TP_WAVELET_NOISE;Denoise and Refine
-!TP_WAVELET_NPHIGH;High
-!TP_WAVELET_NPLOW;Low
-!TP_WAVELET_NPNONE;None
-!TP_WAVELET_NPTYPE;Neighboring pixels
-!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced.
-!TP_WAVELET_OPACITY;Opacity Blue-Yellow
-!TP_WAVELET_OPACITYW;Contrast balance d/v-h curve
-!TP_WAVELET_OPACITYWL;Final local contrast
-!TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right.
-!TP_WAVELET_PASTEL;Pastel chroma
-!TP_WAVELET_PROC;Process
-!TP_WAVELET_RE1;Reinforced
-!TP_WAVELET_RE2;Unchanged
-!TP_WAVELET_RE3;Reduced
-!TP_WAVELET_RESCHRO;Chroma
-!TP_WAVELET_RESCON;Shadows
-!TP_WAVELET_RESCONH;Highlights
-!TP_WAVELET_RESID;Residual Image
-!TP_WAVELET_SAT;Saturated chroma
-!TP_WAVELET_SETTINGS;Wavelet Settings
-!TP_WAVELET_SKIN;Skin targetting/protection
-!TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_WAVELET_SKY;Sky targetting/protection
-!TP_WAVELET_SKY_TOOLTIP;At -100 sky-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 sky-tones are protected while all other tones are affected.
-!TP_WAVELET_STREN;Strength
-!TP_WAVELET_STRENGTH;Strength
-!TP_WAVELET_SUPE;Extra
-!TP_WAVELET_THR;Shadows threshold
-!TP_WAVELET_THRESHOLD;Highlight levels
-!TP_WAVELET_THRESHOLD2;Shadow levels
-!TP_WAVELET_THRESHOLD2_TOOLTIP;Only levels between 9 and 9 minus the value will be affected by the shadow luminance range. Other levels will be fully treated. The highest level possible is limited by the highlight level value (9 minus highlight level value).
-!TP_WAVELET_THRESHOLD_TOOLTIP;Only levels beyond the chosen value will be affected by the highlight luminance range. Other levels will be fully treated. The chosen value here limits the highest possible value of the shadow levels.
-!TP_WAVELET_THRH;Highlights threshold
-!TP_WAVELET_TILESBIG;Big tiles
-!TP_WAVELET_TILESFULL;Full image
-!TP_WAVELET_TILESIZE;Tiling method
-!TP_WAVELET_TILESLIT;Little tiles
-!TP_WAVELET_TILES_TOOLTIP;Processing the full image leads to better quality and is the recommended option, while using tiles is a fall-back solution for users with little RAM. Refer to RawPedia for memory requirements.
-!TP_WAVELET_TMSTRENGTH;Compression strength
-!TP_WAVELET_TMSTRENGTH_TOOLTIP;Control the strength of tone mapping or contrast compression of the residual image. When the value is different from 0, the Strength and Gamma sliders of the Tone Mapping tool in the Exposure tab will become grayed out.
-!TP_WAVELET_TMTYPE;Compression method
-!TP_WAVELET_TON;Toning
-!TP_WBALANCE_CLOUDY;Cloudy
-!TP_WBALANCE_DAYLIGHT;Daylight (sunny)
-!TP_WBALANCE_EQBLUERED;Blue/Red equalizer
-!TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behavior of "white balance" by modulating the blue/red balance.\nThis can be useful when shooting conditions:\na) are far from the standard illuminant (e.g. underwater),\nb) are far from conditions where calibrations were performed,\nc) where the matrices or ICC profiles are unsuitable.
-!TP_WBALANCE_FLASH55;Leica
-!TP_WBALANCE_FLASH60;Standard, Canon, Pentax, Olympus
-!TP_WBALANCE_FLASH65;Nikon, Panasonic, Sony, Minolta
-!TP_WBALANCE_FLASH_HEADER;Flash
-!TP_WBALANCE_FLUO1;F1 - Daylight
-!TP_WBALANCE_FLUO2;F2 - Cool White
-!TP_WBALANCE_FLUO3;F3 - White
-!TP_WBALANCE_FLUO4;F4 - Warm White
-!TP_WBALANCE_FLUO5;F5 - Daylight
-!TP_WBALANCE_FLUO6;F6 - Lite White
-!TP_WBALANCE_FLUO7;F7 - D65 Daylight Simulator
-!TP_WBALANCE_FLUO8;F8 - D50 / Sylvania F40 Design
-!TP_WBALANCE_FLUO9;F9 - Cool White Deluxe
-!TP_WBALANCE_FLUO10;F10 - Philips TL85
-!TP_WBALANCE_FLUO11;F11 - Philips TL84
-!TP_WBALANCE_FLUO12;F12 - Philips TL83
-!TP_WBALANCE_FLUO_HEADER;Fluorescent
-!TP_WBALANCE_GTI;GTI
-!TP_WBALANCE_HMI;HMI
-!TP_WBALANCE_JUDGEIII;JudgeIII
-!TP_WBALANCE_LAMP_HEADER;Lamp
-!TP_WBALANCE_LED_CRS;CRS SP12 WWMR16
-!TP_WBALANCE_LED_HEADER;LED
-!TP_WBALANCE_LED_LSI;LSI Lumelex 2040
-!TP_WBALANCE_PICKER;Pick
-!TP_WBALANCE_SHADE;Shade
-!TP_WBALANCE_SOLUX35;Solux 3500K
-!TP_WBALANCE_SOLUX41;Solux 4100K
-!TP_WBALANCE_SOLUX47;Solux 4700K (vendor)
-!TP_WBALANCE_SOLUX47_NG;Solux 4700K (Nat. Gallery)
-!TP_WBALANCE_TEMPBIAS;AWB temperature bias
-!TP_WBALANCE_TEMPBIAS_TOOLTIP;Allows to alter the computation of the "auto white balance"\nby biasing it towards warmer or cooler temperatures. The bias\nis expressed as a percentage of the computed temperature,\nso that the result is given by "computedTemp + computedTemp * bias".
-!TP_WBALANCE_TUNGSTEN;Tungsten
-!TP_WBALANCE_WATER1;UnderWater 1
-!TP_WBALANCE_WATER2;UnderWater 2
-!TP_WBALANCE_WATER_HEADER;UnderWater
-!ZOOMPANEL_100;(100%)
-!ZOOMPANEL_NEWCROPWINDOW;Open (new) detail window
-!ZOOMPANEL_ZOOM100;Zoom to 100%\nShortcut: z
-!ZOOMPANEL_ZOOMFITCROPSCREEN;Fit crop to screen\nShortcut: f
-!ZOOMPANEL_ZOOMFITSCREEN;Fit whole image to screen\nShortcut: Alt-f
-!ZOOMPANEL_ZOOMIN;Zoom In\nShortcut: +
-!ZOOMPANEL_ZOOMOUT;Zoom Out\nShortcut: -
diff --git a/rtdata/languages/Italiano b/rtdata/languages/Italiano
index 4f8630b05..8108c4235 100644
--- a/rtdata/languages/Italiano
+++ b/rtdata/languages/Italiano
@@ -75,7 +75,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Ignora i Passaggi di Miglioramento LMMSE
EXPORT_BYPASS_SHARPENEDGE;Ignora Nitidezza dei bordi
EXPORT_BYPASS_SHARPENING;Ignora Nitidezza
EXPORT_BYPASS_SHARPENMICRO;Ignora Microcontrasto
-EXPORT_BYPASS_SH_HQ;Ignora Ombre/Alteluci (Alta Qualità)
EXPORT_FASTEXPORTOPTIONS;Opzioni di Esportazione Rapida
EXPORT_INSTRUCTIONS;Le opzioni di Esportazione Rapida forniscono opzioni per ignorare le impostazioni di sviluppo ad elevato consumo di tempo e risorse ed avviare quindi la coda di sviluppo usando solo le impostazioni veloci. Questo metodo è consigliato per la lavorazione veloce di immagini a bassa risoluzione quando è importante la rapidità, oppure quando si desidera ridimensionare una o più immagini senza apportare modifiche ai parametri di sviluppo salvati.
EXPORT_MAXHEIGHT;Altezza Massima:
@@ -84,7 +83,6 @@ EXPORT_PUTTOQUEUEFAST; Aggiungi alla Coda di sviluppo per l'Esportazione Rapida
EXPORT_RAW_DMETHOD;Metodo di Demosaicizzazione
EXTPROGTARGET_1;raw
EXTPROGTARGET_2;Lavorato dalla Coda
-FILEBROWSER_ADDDELTEMPLATE;Aggiungi/Rimuovi schemi...
FILEBROWSER_APPLYPROFILE;Applica
FILEBROWSER_APPLYPROFILE_PARTIAL;Applica (parziale)
FILEBROWSER_AUTODARKFRAME;Dark Frame automatico
@@ -198,7 +196,6 @@ GENERAL_WARNING;Attenzione
HISTOGRAM_TOOLTIP_B;Mostra/Nascondi l'istogramma del Blu.
HISTOGRAM_TOOLTIP_BAR;Mostra/Nascondi la barra RBG.\nPremi il tasto destro del mouse sull'anteprima dell'immagine per bloccarla/sbloccarla.
HISTOGRAM_TOOLTIP_CHRO;Mostra/Nascondi l'istogramma di cromaticità.
-HISTOGRAM_TOOLTIP_FULL;Commuta tra istogramma pieno (premuto) o scalato (rilasciato).
HISTOGRAM_TOOLTIP_G;Mostra/Nascondi l'istogramma del Verde.
HISTOGRAM_TOOLTIP_L;Mostra/Nascondi l'istogramma di Luminanza CIELAB.
HISTOGRAM_TOOLTIP_R;Mostra/Nascondi l'istogramma del Rosso.
@@ -623,7 +620,6 @@ PREFERENCES_BEHADDALLHINT;Imposta tutti i parametri nella modalità Somma
PREFERENCES_BEHAVIOR;Comportamento
PREFERENCES_BEHSETALL;Tutti a 'Imposta'
PREFERENCES_BEHSETALLHINT;Imposta tutti i parametri nella modalità Imposta.\nLe regolazioni dei parametri nel pannello strumenti batch saranno assoluti, verranno mostrati i valori reali.
-PREFERENCES_BLACKBODY;Tungsteno
PREFERENCES_CACHEMAXENTRIES;Numero massimo di voci in memoria
PREFERENCES_CACHEOPTS;Opzioni della memoria
PREFERENCES_CACHETHUMBHEIGHT;Massima altezza delle miniature
@@ -634,10 +630,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Formato tasti
PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Nome
PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
PREFERENCES_CUSTPROFBUILDPATH;Percorso dell'eseguibile
-PREFERENCES_D50;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
PREFERENCES_DARKFRAMEFOUND;Trovati
PREFERENCES_DARKFRAMESHOTS;fotogrammi
PREFERENCES_DARKFRAMETEMPLATES;modelli
@@ -657,22 +649,10 @@ PREFERENCES_FLATFIELDFOUND;Trovati
PREFERENCES_FLATFIELDSDIR;Cartella dei fotogrammi di campo (Flat Field)
PREFERENCES_FLATFIELDSHOTS;fotogrammi
PREFERENCES_FLATFIELDTEMPLATES;modelli
-PREFERENCES_FLUOF2;Fluorescente F2
-PREFERENCES_FLUOF7;Fluorescente F7
-PREFERENCES_FLUOF11;Fluorescente F11
PREFERENCES_FORIMAGE;Per foto non raw
PREFERENCES_FORRAW;Per foto raw
PREFERENCES_GIMPPATH;Cartella d'installazione di GIMP
-PREFERENCES_GREY;Luminosità Yb del dispositivo di uscita (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
PREFERENCES_HISTOGRAMPOSITIONLEFT;Istogramma nel pannello sinistro
-PREFERENCES_HISTOGRAMWORKING;Profilo di Lavoro per Istogramma e Navigatore
PREFERENCES_HISTOGRAM_TOOLTIP;Se abilitato, Navigatore e Istogramma usano il Profilo di Lavoro anziché il Profilo di Uscita (con gamma)
PREFERENCES_HLTHRESHOLD;Soglia per le alteluci tosate
PREFERENCES_ICCDIR;Cartella profili colore
@@ -689,7 +669,6 @@ PREFERENCES_MENUGROUPLABEL;Raggruppa "Etichette Colore"
PREFERENCES_MENUGROUPPROFILEOPERATIONS;Raggruppa "Operazioni sui profili"
PREFERENCES_MENUGROUPRANK;Raggruppa "Classificazioni"
PREFERENCES_MENUOPTIONS;Opzioni del menù a discesa
-PREFERENCES_METADATA;Metadati
PREFERENCES_MULTITAB;Modalità a Schede Multiple
PREFERENCES_MULTITABDUALMON;Modalità a Schede Multiple (se disponibile sul secondo schermo)
PREFERENCES_OUTDIR;Cartella di destinazione
@@ -733,7 +712,6 @@ PREFERENCES_TAB_SOUND;Suoni
PREFERENCES_TP_LABEL;Pannello Strumenti:
PREFERENCES_TP_VSCROLLBAR;Nascondi la barra di scorrimento verticale
PREFERENCES_USEBUNDLEDPROFILES;Usa profili inclusi
-PREFERENCES_VIEW;Bilanciamento del bianco del dispositivo di uscita (monitor, TV, proiettore...)
PREFERENCES_WORKFLOW;Disposizione
PROFILEPANEL_COPYPPASTE;Parametri da copiare
PROFILEPANEL_GLOBALPROFILES;Profili inclusi
@@ -773,7 +751,6 @@ SAVEDLG_AUTOSUFFIX;Aggiungi automaticamente un suffisso se il file esiste già
SAVEDLG_FILEFORMAT;Formato file
SAVEDLG_FORCEFORMATOPTS;Opzioni di salvataggio forzato
SAVEDLG_JPEGQUAL;Qualità JPEG
-SAVEDLG_PNGCOMPR;Compressione PNG
SAVEDLG_PUTTOQUEUE;Inserisci nella coda di sviluppo
SAVEDLG_PUTTOQUEUEHEAD;Metti in cima alla coda di sviluppo
SAVEDLG_PUTTOQUEUETAIL;Metti in fondo alla coda di sviluppo
@@ -914,8 +891,6 @@ TP_COLORAPP_SURROUND_DARK;Scuro
TP_COLORAPP_SURROUND_DIM;Fioco
TP_COLORAPP_SURROUND_EXDARK;Estremamente Scuro (Pieghevole)
TP_COLORAPP_SURROUND_TOOLTIP;Cambia toni e colori per tenere conto delle condizioni di visualizzazione del dispositivo di uscita\n\nMedio: Ambiente mediamente illuminato (standard)\nL'immagine non verrà modificata.\n\nFioco: Ambiente fioco (TV)\nL'immagine diverrà leggermente più scura\n\nScuro: Ambiente scuro (proiettore)\nL'immagine diventerà più scura\n\nEstremamente Scuro: Ambiente buio (Pieghevole)\nL'immagine diventerà molto più scura.
-TP_COLORAPP_SURSOURCE;Ambiente scuro
-TP_COLORAPP_SURSOURCE_TOOLTIP;Si può utilizzare nel caso in cui l'immagine abbia bordi scuri.
TP_COLORAPP_TCMODE_BRIGHTNESS;Brillanza
TP_COLORAPP_TCMODE_CHROMA;Croma
TP_COLORAPP_TCMODE_COLORF;Pienezza
@@ -950,13 +925,10 @@ TP_DEFRINGE_THRESHOLD;Soglia
TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Crominanza - Blu-Giallo
TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Crominanza (Principale)
TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Crominanza - Rosso-Verde
-TP_DIRPYRDENOISE_ENH;Modalità Migliorata
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Aumenta la qualità della riduzione rumore al costo di un incremento del 20% del tempo di elaborazione.
TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Dettaglio di Luminanza
TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminanza
TP_DIRPYRDENOISE_MAIN_COLORSPACE;Metodo
TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;Lab
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_LABEL;Riduzione Rumore
TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;Per immagini raw può essere usato il metodo RGB o Lab.\n\nPer immagini non raw verrà utilizzato il metodo Lab, indipendentemente dalla selezione.
TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
@@ -1012,10 +984,6 @@ TP_FLATFIELD_BT_HORIZONTAL;Orizzontale
TP_FLATFIELD_BT_VERTHORIZ;Vert. + Oriz.
TP_FLATFIELD_BT_VERTICAL;Verticale
TP_FLATFIELD_LABEL;Flat Field
-TP_GAMMA_CURV;Gamma
-TP_GAMMA_FREE;Gamma libero
-TP_GAMMA_OUTPUT;Gamma di uscita
-TP_GAMMA_SLOP;Pendenza (lineare)
TP_GENERAL_11SCALE_TOOLTIP;L'effetto di questo strumento è visibile solo (o è accurato solo) con l'anteprima in scala 1:1.
TP_GRADIENT_CENTER;Centro
TP_GRADIENT_CENTER_X;Centro X
@@ -1041,8 +1009,6 @@ TP_HSVEQUALIZER_HUE;H
TP_HSVEQUALIZER_LABEL;Equalizzatore HSV
TP_HSVEQUALIZER_SAT;S
TP_HSVEQUALIZER_VAL;V
-TP_ICM_BLENDCMSMATRIX;Fonde le alteluci ICC con matrix
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Abilita per recuperare le alteluci bruciate quando usi profili ICC basati su LUT.
TP_ICM_DCPILLUMINANT;Illuminazione
TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolato
TP_ICM_DCPILLUMINANT_TOOLTIP;Seleziona il DCP del tipo di illuminazione da utilizzare. Il predefinito è "interpolato", un mix tra i due basato sul bilanciamento del bianco. Questa impostazione è abilitata solo se è selezionato Doppia Illuminazione con supporto interpolato.
@@ -1169,10 +1135,8 @@ TP_SAVEDIALOG_OK_TIP;Scorciatoia: Ctrl-Enter
TP_SHADOWSHLIGHTS_HIGHLIGHTS;Alteluci
TP_SHADOWSHLIGHTS_HLTONALW;Ampiezza Tonale delle Alteluci
TP_SHADOWSHLIGHTS_LABEL;Ombre/Alteluci
-TP_SHADOWSHLIGHTS_LOCALCONTR;Contrasto Locale
TP_SHADOWSHLIGHTS_RADIUS;Raggio
TP_SHADOWSHLIGHTS_SHADOWS;Ombre
-TP_SHADOWSHLIGHTS_SHARPMASK;Maschera di Nitidezza
TP_SHADOWSHLIGHTS_SHTONALW;Ampiezza Tonale delle Ombre
TP_SHARPENEDGE_AMOUNT;Quantità
TP_SHARPENEDGE_LABEL;Bordi
@@ -1739,17 +1703,11 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: -
!PREFERENCES_CURVEBBOXPOS_BELOW;Below
!PREFERENCES_CURVEBBOXPOS_LEFT;Left
!PREFERENCES_CURVEBBOXPOS_RIGHT;Right
-!PREFERENCES_D50_OLD;5000K
!PREFERENCES_DIRECTORIES;Directories
!PREFERENCES_EDITORCMDLINE;Custom command line
!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
!PREFERENCES_INSPECT_LABEL;Inspect
!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
@@ -1790,7 +1748,6 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: -
!PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
!PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
!PROFILEPANEL_PDYNAMIC;Dynamic
!PROGRESSBAR_DECODING;Decoding...
!PROGRESSBAR_GREENEQUIL;Green equilibration...
@@ -1896,7 +1853,6 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: -
!TP_DEHAZE_STRENGTH;Strength
!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
!TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominance
@@ -1931,7 +1887,6 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: -
!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
!TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
!TP_DIRPYRDENOISE_TYPE_3X3;3×3
!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
!TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -2005,7 +1960,6 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: -
!TP_RAWCACORR_AUTOIT;Iterations
!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CASTR;Strength
!TP_RAWEXPOS_BLACK_0;Green 1 (lead)
!TP_RAWEXPOS_BLACK_1;Red
!TP_RAWEXPOS_BLACK_2;Blue
@@ -2051,15 +2005,12 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: -
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
!TP_RAW_PIXELSHIFTMM_OFF;Off
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -2094,7 +2045,6 @@ ZOOMPANEL_ZOOMOUT;Rimpicciolisci.\nScorciatoia: -
!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
!TP_RETINEX_GAINTRANSMISSION;Gain transmission
!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
!TP_RETINEX_GAMMA;Gamma
!TP_RETINEX_GAMMA_FREE;Free
!TP_RETINEX_GAMMA_HIGH;High
diff --git a/rtdata/languages/Japanese b/rtdata/languages/Japanese
index 4a5f7bb36..e8a992b12 100644
--- a/rtdata/languages/Japanese
+++ b/rtdata/languages/Japanese
@@ -130,7 +130,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;[raw] LMMSE 拡張処理を迂回
EXPORT_BYPASS_SHARPENEDGE;エッジ・シャープニングを迂回
EXPORT_BYPASS_SHARPENING;シャープニングを迂回
EXPORT_BYPASS_SHARPENMICRO;マイクロコントラストを迂回
-EXPORT_BYPASS_SH_HQ;シャドウ/ハイライト(高画質)を迂回
EXPORT_FASTEXPORTOPTIONS;高速書き出しオプション
EXPORT_INSTRUCTIONS;現像の設定に要する時間と手間を省くために、高速書き出しを優先させるオプションです。処理速度が優先される場合や、既定の現像パラメータを変えずに何枚ものリサイズ画像が要求される場合に奨められる方法で、低解像度画像を迅速に生成します。
EXPORT_MAXHEIGHT;最大高:
@@ -143,7 +142,6 @@ EXPORT_USE_FAST_PIPELINE_TIP;処理速度を優先すると、処理は速くな
EXPORT_USE_NORMAL_PIPELINE;標準(リサイズ処理は最後、幾つかの処理を迂回)
EXTPROGTARGET_1;raw
EXTPROGTARGET_2;キュー処理
-FILEBROWSER_ADDDELTEMPLATE;テンプレートの追加/削除...
FILEBROWSER_APPLYPROFILE;プロファイルの適用
FILEBROWSER_APPLYPROFILE_PARTIAL;プロファイルの適用 (一部)
FILEBROWSER_AUTODARKFRAME;オート・ダークフレーム
@@ -277,7 +275,6 @@ GIMP_PLUGIN_INFO;RawTherapee GIMPプラグインにようこそ！\n画像編
HISTOGRAM_TOOLTIP_B;ブルー・ヒストグラム 表示/非表示
HISTOGRAM_TOOLTIP_BAR;RGBインジケーター・バーの表示/非表示\nプレビュー画像上でマウスの右ボタンクリックで 固定/開放
HISTOGRAM_TOOLTIP_CHRO;色度・ヒストグラム 表示/非表示
-HISTOGRAM_TOOLTIP_FULL;完全/縮尺調整の表示切り替え
HISTOGRAM_TOOLTIP_G;グリーン・ヒストグラム 表示/非表示
HISTOGRAM_TOOLTIP_L;CIEL*a*b* 輝度・ヒストグラム 表示/非表示
HISTOGRAM_TOOLTIP_MODE;ヒストグラムの尺度を線形、対数-線形、対数-対数でトグルします
@@ -1086,7 +1083,6 @@ PREFERENCES_BEHADDALLHINT;すべてのパラメータを 追加モード
PREFERENCES_BEHAVIOR;ビヘイビア
PREFERENCES_BEHSETALL;すべて '設定'
PREFERENCES_BEHSETALLHINT;すべてのパラメータを 設定モードにします\nバッチツールパネルで設定される調整値が、各画像の既定値に取って代わり同一になります
-PREFERENCES_BLACKBODY;タングステン
PREFERENCES_CACHECLEAR;クリア
PREFERENCES_CACHECLEAR_ALL;cacheに入れられたファイルを全てクリア:
PREFERENCES_CACHECLEAR_ALLBUTPROFILES;cacheに入れた処理プロファイル以外をクリア:
@@ -1117,11 +1113,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;キーフォーマット
PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;名前
PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;タグID
PREFERENCES_CUSTPROFBUILDPATH;実行ファイルのパス
-PREFERENCES_D50;5000K
-PREFERENCES_D50_OLD;5000k
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
PREFERENCES_DARKFRAMEFOUND;検出
PREFERENCES_DARKFRAMESHOTS;ショット
PREFERENCES_DARKFRAMETEMPLATES;テンプレート
@@ -1144,32 +1135,15 @@ PREFERENCES_FLATFIELDFOUND;検出
PREFERENCES_FLATFIELDSDIR;フラットフィールド・ディレクトリ
PREFERENCES_FLATFIELDSHOTS;ショット
PREFERENCES_FLATFIELDTEMPLATES;テンプレート
-PREFERENCES_FLUOF2;蛍光灯 F2
-PREFERENCES_FLUOF7;蛍光灯 F7
-PREFERENCES_FLUOF11;蛍光灯 F11
PREFERENCES_FORIMAGE;rawではない画像
PREFERENCES_FORRAW;raw画像
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;ファイルブラウザと編集パネルのサムネイルのサイズを同じにする
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;サムネイルのサイズが異なると、編集パネルとファイルブラウザ間の切り替えで、余分な処理時間がかかります
PREFERENCES_GIMPPATH;GIMP インストール ディレクトリ
-PREFERENCES_GREY;出力デバイスのYb輝度 (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;撮影時のYb輝度 (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;Ybを自動で計算
PREFERENCES_HISTOGRAMPOSITIONLEFT;左パネルにヒストグラム
-PREFERENCES_HISTOGRAMWORKING;ヒストグラムとナビゲーターの表示に作業プロファイルを使う
PREFERENCES_HISTOGRAM_TOOLTIP;これを有効にすると、ヒストグラムとナビゲーターの表示に、出力プロファイル（ガンマ適用）の代わりに作業プロファイルを使います
PREFERENCES_HLTHRESHOLD;ハイライト・クリッピング領域のしきい値
PREFERENCES_ICCDIR;カラープロファイルを含むディレクトリ
-PREFERENCES_IMG_RELOAD_NEEDED;これらの変更を有効にするには画像の再読み込みが必要です（或いは、新しい画像の読み込み）
PREFERENCES_IMPROCPARAMS;画像処理のデフォルト値
PREFERENCES_INSPECT_LABEL;カメラ出しJPEG
PREFERENCES_INSPECT_MAXBUFFERS_LABEL;cacheに入れる画像の最大数
@@ -1188,7 +1162,6 @@ PREFERENCES_MENUGROUPLABEL;"カラーラベル"のグループ
PREFERENCES_MENUGROUPPROFILEOPERATIONS;"処理プロファイル操作"のグループ
PREFERENCES_MENUGROUPRANK;"ランキング"のグループ
PREFERENCES_MENUOPTIONS;メニューオプションの状況
-PREFERENCES_METADATA;メタデータ
PREFERENCES_MONINTENT;デフォルトのモニターインテント
PREFERENCES_MONITOR;モニター
PREFERENCES_MONPROFILE;デフォルトのモニタープロファイル
@@ -1264,9 +1237,7 @@ PREFERENCES_THUMBNAIL_INSPECTOR_RAW;ニュートラルなrawレンダリング
PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;埋め込まれているJPEGがフルサイズの場合、指定がなければニュートラルなrawレンダリングで表示
PREFERENCES_TP_LABEL;ツール パネル:
PREFERENCES_TP_VSCROLLBAR;ツールパネルの垂直スクロールバーを隠す
-PREFERENCES_TUNNELMETADATA;Exif/IPTC/XMPを変更を加えずに出力ファイルにコピー
PREFERENCES_USEBUNDLEDPROFILES;付属のプロファイルを使用
-PREFERENCES_VIEW;出力デバイスのホワイトバランス設定 (モニター, TV, プロジェクター,観視...)
PREFERENCES_WORKFLOW;レイアウト
PROFILEPANEL_COPYPPASTE;コピーするパラメータ
PROFILEPANEL_GLOBALPROFILES;付属のプロファイル
@@ -1475,8 +1446,6 @@ TP_COLORAPP_SURROUND_DARK;暗い
TP_COLORAPP_SURROUND_DIM;薄暗い
TP_COLORAPP_SURROUND_EXDARK;非常に暗い (Cutsheet)
TP_COLORAPP_SURROUND_TOOLTIP;トーンとカラーの変更は、出力デバイスの観視条件を計算に入れます\n\n普通:\n平均的な明るい環境 (標準)\n画像は変更されません\n\n薄暗い:\n薄暗い環境 (TV)\n画像は若干暗くなります\n\n暗い:\n暗い環境 (プロジェクター)\n画像はかなり暗くなります\n\n非常に暗い:\n非常に暗い環境 (Cutsheet)\n画像はとても暗くなります
-TP_COLORAPP_SURSOURCE;暗い周囲環境
-TP_COLORAPP_SURSOURCE_TOOLTIP;ソース画像が暗い周囲環境にある場合使用できます
TP_COLORAPP_TCMODE_BRIGHTNESS;明るさ
TP_COLORAPP_TCMODE_CHROMA;色度
TP_COLORAPP_TCMODE_COLORF;鮮やかさ
@@ -1577,7 +1546,6 @@ TP_DEHAZE_SHOW_DEPTH_MAP;深度マップの表示
TP_DEHAZE_STRENGTH;強さ
TP_DIRPYRDENOISE_CHROMINANCE_AMZ;自動（多分割方式）
TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;自動（分割方式）
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;色ノイズ低減の効果を確認して下さい\n注意：設定値の計算はあくまで平均的なもので、かなり主観的でです
TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;色差 ブルー/イエロー
TP_DIRPYRDENOISE_CHROMINANCE_CURVE;色ノイズ低減のカーブ
TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;クロミナンススライダー全ての値を増幅します\n色度をベースにこのカーブで色ノイズ低減の強さを加減します。例えば彩度の低い部分で作用を強める、或いは色度の高い部分で作用を弱めるように使います
@@ -1595,8 +1563,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;プレビュー画像のノイズ
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;プレビュー画像のノイズ: 平均値= - 最大値= -
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;タイルのサイズ=%1, 中心位置: X座標=%2 Y座標=%3
TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;色差 レッド/グリーン
-TP_DIRPYRDENOISE_ENH;強化モード
-TP_DIRPYRDENOISE_ENH_TOOLTIP;ノイズ低減の効果を髙めますが、代わりに演算時間が約20%増えます。
TP_DIRPYRDENOISE_LABEL;ノイズ低減
TP_DIRPYRDENOISE_LUMINANCE_CONTROL;輝度ノイズの調整法
TP_DIRPYRDENOISE_LUMINANCE_CURVE;輝度カーブ
@@ -1625,7 +1591,6 @@ TP_DIRPYRDENOISE_MEDIAN_PASSES;フィルタリングの繰り返し回数
TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;計算領域が3x3ピクセルのメディアンフィルタを3回繰り返し適用する方が、計算領域が7x7ピクセルのメディアンフィルタを1回適用するより結果が良くなることがままあります。
TP_DIRPYRDENOISE_MEDIAN_TYPE;フィルターの種類
TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;適用するメディアンフィルタのサイズを決めます。大きくするとその分処理時間が増えます。大きいサイズを使うとそれだけ処理時間が増えます。\n\n3×3 ソフト: 3x3ピクセルの計算領域で5ピクセルを処理します\n3×3:3x3ピクセルの計算領域で9ピクセルを処理します\n5×5 ソフト: 5x5ピクセルの計算領域で13ピクセルを処理します\n5×5: 5x5ピクセルの計算領域で25ピクセルを処理します\n7×7: 7x7ピクセルの計算領域で49ピクセルを処理します\n9×9: 9x9ピクセルの計算領域で81ピクセルを処理します\n\n場合によっては、小さいウィンドウで複数回適用を繰り返す方が、大きいウィンドウを1回適用するより結果が良いことがあります。
-TP_DIRPYRDENOISE_SLI;スライダー
TP_DIRPYRDENOISE_TYPE_3X3;3×3
TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 ソフト
TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1730,8 +1695,6 @@ TP_ICM_APPLYHUESATMAP;ベーステーブル
TP_ICM_APPLYHUESATMAP_TOOLTIP;DCPに埋め込まれているベーステーブル（色相彩度マップ）を用います。但し、適用するDCPにこのタグがある場合に限ります。
TP_ICM_APPLYLOOKTABLE;ルックテーブル
TP_ICM_APPLYLOOKTABLE_TOOLTIP;DCPに埋め込まれているルックテーブルを用います。但し、適用するDCPにこのタグがある場合に限ります。
-TP_ICM_BLENDCMSMATRIX;マトリクスとハイライト・ブレンド
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;LUTベースのICCプロファイルを使用するときに白トビを修復
TP_ICM_BPC;ブラックポイント補正
TP_ICM_DCPILLUMINANT;光源
TP_ICM_DCPILLUMINANT_INTERPOLATED;補間
@@ -1849,7 +1812,6 @@ TP_PREPROCESS_LINEDENOISE_DIRECTION_PDAF_LINES;PDAFの場合は水平方向だ
TP_PREPROCESS_LINEDENOISE_DIRECTION_VERTICAL;垂直方向
TP_PREPROCESS_NO_FOUND;未検出
TP_PREPROCESS_PDAFLINESFILTER;PDAFラインフィルタ
-TP_PREPROCESS_PDAFLINESFILTER_TOOLTIP;Sonyのミラーレスカメラの一部では、PDAFイメージセンサが原因で、ゴーストが出るバックライトの画像でストライプノイズが発生することがあり、これを軽減します。
TP_PRSHARPENING_LABEL;リサイズ後のシャープニング
TP_PRSHARPENING_TOOLTIP;リサイズ後の画像をシャープニングします。但し、リサイズの方式がランチョスの場合に限ります。プレビュー画面でこの機能の効果を見ることは出来ません。使用法に関してはRawPediaを参照して下さい。
TP_RAWCACORR_AUTO;自動補正
@@ -1858,7 +1820,6 @@ TP_RAWCACORR_AUTOIT_TOOLTIP;”自動補正”が有効になっている場合
TP_RAWCACORR_AVOIDCOLORSHIFT;色ずれを回避
TP_RAWCACORR_CABLUE;ブルー
TP_RAWCACORR_CARED;レッド
-TP_RAWCACORR_CASTR;強さ
TP_RAWEXPOS_BLACKS;黒レベル
TP_RAWEXPOS_BLACK_0;グリーン1（先頭）
TP_RAWEXPOS_BLACK_1;レッド
@@ -1916,15 +1877,12 @@ TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;選択した構成画像の明るさを他
TP_RAW_PIXELSHIFTGREEN;振れに関するグリーンチャンネルを確認
TP_RAW_PIXELSHIFTHOLEFILL;振れマスクの穴を埋める
TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;振れマスクの穴を埋める
-TP_RAW_PIXELSHIFTLMMSE;振れのある領域にLMMSEを使用
-TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;振れのある領域にはAMaZEの代わりにLMMSEを使います。\nISO値が高い画像の処
TP_RAW_PIXELSHIFTMEDIAN;振れのある領域にはメディアンを使用
TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;振れのある領域に関しては、選択した画像ではなく全ての構成画像にメディアンを使います。\n全ての構成画像で異なる位置にある被写体は除きます。\n動きの遅い被写体（オーバーラッピング）には振れの効果が出ます。
TP_RAW_PIXELSHIFTMM_AUTO;自動
TP_RAW_PIXELSHIFTMM_CUSTOM;カスタム
TP_RAW_PIXELSHIFTMM_OFF;オフ
TP_RAW_PIXELSHIFTMOTIONMETHOD;振れ補正
-TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0は振れの検知が行われないことを意味します\n1 - 99は振れを検知する強さを意味します。値を増やすと検知率が上がります。\n100に設定するとAMaZEでデモザイクされた画像が使われます
TP_RAW_PIXELSHIFTNONGREENCROSS;振れに関するレッド／ブルーのチャンネルを確認
TP_RAW_PIXELSHIFTSHOWMOTION;振れマスクを含めて表示
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;振れマスクだけを表示
@@ -1971,7 +1929,6 @@ TP_RETINEX_GAIN;ゲイン
TP_RETINEX_GAINOFFS;ゲインとオフセット(明るさ)
TP_RETINEX_GAINTRANSMISSION;ゲインの透過
TP_RETINEX_GAINTRANSMISSION_TOOLTIP;目標とする輝度を得るために、透過マップ増幅したり減衰させたりします。\n横軸：左から最小、平均、最大となります。\n縦軸：ゲイン
-TP_RETINEX_GAIN_TOOLTIP;修復画像に作用します\n\nこれは他の設定とは大きく異なります。 ブラックピクセルやホワイトピクセルに対して使う設定で、ヒストグラムのバランスを補正します
TP_RETINEX_GAMMA;ガンマ
TP_RETINEX_GAMMA_FREE;フリー
TP_RETINEX_GAMMA_HIGH;高
@@ -2049,10 +2006,8 @@ TP_SAVEDIALOG_OK_TIP;ショートカット Ctrl-Enter
TP_SHADOWSHLIGHTS_HIGHLIGHTS;ハイライトを暗く
TP_SHADOWSHLIGHTS_HLTONALW;ハイライトトーンの幅
TP_SHADOWSHLIGHTS_LABEL;シャドウ/ハイライト
-TP_SHADOWSHLIGHTS_LOCALCONTR;ローカルコントラスト
TP_SHADOWSHLIGHTS_RADIUS;半径
TP_SHADOWSHLIGHTS_SHADOWS;シャドウを明るく
-TP_SHADOWSHLIGHTS_SHARPMASK;シャープマスク
TP_SHADOWSHLIGHTS_SHTONALW;シャドウトーンの幅
TP_SHARPENEDGE_AMOUNT;適用量
TP_SHARPENEDGE_LABEL;エッジ
diff --git a/rtdata/languages/Latvian b/rtdata/languages/Latvian
deleted file mode 100644
index 91b4b53a8..000000000
--- a/rtdata/languages/Latvian
+++ /dev/null
@@ -1,2329 +0,0 @@
-#01 YYYY-MM-DD by nickname
-
-CURVEEDITOR_LINEAR;Lineāri
-CURVEEDITOR_LOADDLGLABEL;Ielādēt līkni...
-CURVEEDITOR_SAVEDLGLABEL;Saglabāt līkni...
-CURVEEDITOR_TOOLTIPLINEAR;Iztaisnot līkni
-CURVEEDITOR_TOOLTIPLOAD;Ielādēt līkni no faila
-CURVEEDITOR_TOOLTIPSAVE;Saglabāt esošo līkni
-DIRBROWSER_FOLDERS;Mapes
-EXIFFILTER_APERTURE;Atvērums
-EXIFFILTER_CAMERA;Kamera
-EXIFFILTER_FOCALLEN;Fokusa garums
-EXIFFILTER_ISO;ISO
-EXIFFILTER_LENS;Lēca
-EXIFFILTER_SHUTTER;Slēdzis
-EXIFPANEL_ADDEDIT;Pielikt/Labot
-EXIFPANEL_ADDEDITHINT;Pielikt jaunu birku vai labot birku
-EXIFPANEL_ADDTAGDLG_ENTERVALUE;Ievadiet vērtību
-EXIFPANEL_ADDTAGDLG_SELECTTAG;Izvēlēt birku
-EXIFPANEL_ADDTAGDLG_TITLE;Pielikt/Labot birku
-EXIFPANEL_KEEP;Atstāt
-EXIFPANEL_KEEPHINT;Atstāt izvēlētās birkas kad raksta izvades failu
-EXIFPANEL_REMOVE;Noņemt
-EXIFPANEL_REMOVEHINT;Noņemt izvēlētās birkas kad raksta izvades failu
-EXIFPANEL_RESET;Atmest
-EXIFPANEL_RESETALL;Atmest visu
-EXIFPANEL_RESETALLHINT;Atmest visas birkas uz to noklusētajām vērtībām
-EXIFPANEL_RESETHINT;Atmest izvēlētās birkas uz to noklusētajām vērtībām
-EXIFPANEL_SUBDIRECTORY;Subdirektorijs
-FILEBROWSER_APPLYPROFILE;Lietot profilu
-FILEBROWSER_CLEARPROFILE;Notīrīt profilu
-FILEBROWSER_COPYPROFILE;Kopēt profilu
-FILEBROWSER_DELETEDLGLABEL;Faila dzēšanas apstiprinājums
-FILEBROWSER_DELETEDLGMSG;Vai tiešām dzēst %1 atzīmētos filus?
-FILEBROWSER_EMPTYTRASH;Izmest atkritumus
-FILEBROWSER_EMPTYTRASHHINT;Galīgi izdzēst atkritnes failus
-FILEBROWSER_PARTIALPASTEPROFILE;Daļēja ielīmēšana
-FILEBROWSER_PASTEPROFILE;Ielīmēt profilu
-FILEBROWSER_POPUPCANCELJOB;Atcelt darbu
-FILEBROWSER_POPUPMOVEEND;Pārvietot uz rindas beigām
-FILEBROWSER_POPUPMOVEHEAD;Pārvietot uz rindas sākumu
-FILEBROWSER_POPUPOPEN;Atvērt
-FILEBROWSER_POPUPOPENINEDITOR;Atvērt redaktorā
-FILEBROWSER_POPUPPROCESS;Ielikt apstrādes rindā
-FILEBROWSER_POPUPREMOVE;Dzēst no failu sistēmas
-FILEBROWSER_POPUPRENAME;Pārsaukt
-FILEBROWSER_POPUPSELECTALL;Atzīmēt visu
-FILEBROWSER_POPUPTRASH;Izmest atkritnē
-FILEBROWSER_POPUPUNRANK;Nevērtēt
-FILEBROWSER_POPUPUNTRASH;Izņemt no atkritnes
-FILEBROWSER_RENAMEDLGLABEL;Pārsaukt failu
-FILEBROWSER_SHOWDIRHINT;Rādīt visus direktorija attēlus
-FILEBROWSER_SHOWRANK1HINT;Rādīt attēlus ar 1 zvaigzni
-FILEBROWSER_SHOWRANK2HINT;Rādīt attēlus ar 2 zvaigznēm
-FILEBROWSER_SHOWRANK3HINT;Rādīt attēlus ar 3 zvaigznēm
-FILEBROWSER_SHOWRANK4HINT;Rādīt attēlus ar 4 zvaigznēm
-FILEBROWSER_SHOWRANK5HINT;Rādīt attēlus ar 5 zvaigznēm
-FILEBROWSER_SHOWTRASHHINT;Rādīt atkritni
-FILEBROWSER_SHOWUNRANKHINT;Rādīt nevērtētus attēlus
-FILEBROWSER_THUMBSIZE;Sīktēlu izmērs
-FILEBROWSER_ZOOMINHINT;Palielināt sīktēlus
-FILEBROWSER_ZOOMOUTHINT;Samazināt sīktēlus
-GENERAL_ABOUT;Par
-GENERAL_CANCEL;Atcelt
-GENERAL_DISABLE;Atslēgt
-GENERAL_DISABLED;Atslēgts
-GENERAL_ENABLE;Ieslēgt
-GENERAL_ENABLED;Ieslēgts
-GENERAL_LANDSCAPE;Ainava
-GENERAL_NA;n/a
-GENERAL_NO;Nē
-GENERAL_OK;Labi
-GENERAL_PORTRAIT;Portrets
-GENERAL_SAVE;Saglabāt
-HISTOGRAM_TOOLTIP_B;Rādīt/Slēpt Zilā histogrammu
-HISTOGRAM_TOOLTIP_G;Rādīt/Slēpt Zaļā histogrammu
-HISTOGRAM_TOOLTIP_L;Rādīt/Slēpt CIELAB Spīduma histogrammu
-HISTOGRAM_TOOLTIP_R;Rādīt/Slēpt Sarkanā histogrammu
-HISTORY_CHANGED;Mainīts
-HISTORY_CUSTOMCURVE;Pielāgota līkne
-HISTORY_FROMCLIPBOARD;No starplikas
-HISTORY_LABEL;Vēsture
-HISTORY_MSG_1;Attēls ielādēts
-HISTORY_MSG_2;Profils ielādēts
-HISTORY_MSG_3;Profils izmainīts
-HISTORY_MSG_4;Vēstures pārlūkošana
-HISTORY_MSG_5;Gaišums
-HISTORY_MSG_6;Kontrasts
-HISTORY_MSG_7;Melnais
-HISTORY_MSG_8;Ekspozīcijas labošana
-HISTORY_MSG_9;Izgaismojumu spiešana
-HISTORY_MSG_10;Ēnu spiešana
-HISTORY_MSG_11;Toņa līkne
-HISTORY_MSG_12;Auto Ekspozīcija
-HISTORY_MSG_13;Ekspozīcijas cirpšana
-HISTORY_MSG_14;Spīduma Gaišums
-HISTORY_MSG_15;Spīduma Kontrasts
-HISTORY_MSG_16;Spīduma Melnais
-HISTORY_MSG_17;Spīduma Izgaismojumu spiešana
-HISTORY_MSG_18;Spīduma Ēnu spiešana
-HISTORY_MSG_19;Spīduma Līkne
-HISTORY_MSG_20;Asināšana
-HISTORY_MSG_21;Asināšanas radiuss
-HISTORY_MSG_22;Asināšanas apjoms
-HISTORY_MSG_23;Asināšanas slieksnis
-HISTORY_MSG_24;Asināt tikai malas
-HISTORY_MSG_25;Asināšanas malu meklēšanas radiuss
-HISTORY_MSG_26;Asināšanas malu iecietība
-HISTORY_MSG_27;Asināšanas caurumu kontrole
-HISTORY_MSG_28;Caurumu kontroles apjoms
-HISTORY_MSG_29;Asināšanas metode
-HISTORY_MSG_30;Atritināšanas radiuss
-HISTORY_MSG_31;Atritināšanas apjoms
-HISTORY_MSG_32;Atritināšanas slāpēšana
-HISTORY_MSG_33;Atritināšanas soļi
-HISTORY_MSG_34;Izvairīties no krāsu cirpšanas
-HISTORY_MSG_35;Piesātinājuma ierobežojums
-HISTORY_MSG_36;Piesātinājuma robeža
-HISTORY_MSG_37;Krāsu pastiprināšana
-HISTORY_MSG_38;Baltā līdzsvara metode
-HISTORY_MSG_39;Krāsu temperatūra
-HISTORY_MSG_40;Baltā līdzsvara nokrāsa
-HISTORY_MSG_41;Krāsu nobīde "A"
-HISTORY_MSG_42;Krāsu nobīde "B"
-HISTORY_MSG_43;Spīduma trokšņu slāpēšana
-HISTORY_MSG_44;Spož. trokšņu slāpēšanas radiuss
-HISTORY_MSG_45;Spož. trokšņu slāpēšanas malu iecietība
-HISTORY_MSG_46;Krāsu trokšņu slāpēšana
-HISTORY_MSG_47;Krāsu trokšņu slāpēšanas radiuss
-HISTORY_MSG_48;Krāsu trokšņu slāpēšanas malu iecietība
-HISTORY_MSG_49;Krāsu trokšņu slāpēšanas malu jutīgums
-HISTORY_MSG_50;Ēnu/Izgaismojumu rīks
-HISTORY_MSG_51;Izgaismojumu pastiprināšana
-HISTORY_MSG_52;Ēnu pastiprināšana
-HISTORY_MSG_53;Izgaismojumu toņa platums
-HISTORY_MSG_54;Ēnu toņa platums
-HISTORY_MSG_55;Vietējais kontrasts
-HISTORY_MSG_56;Ēnu/Izgaismojumu radiuss
-HISTORY_MSG_57;Raupja pagriešana
-HISTORY_MSG_58;Horizontāla apmešana
-HISTORY_MSG_59;Vertikāla apmešana
-HISTORY_MSG_60;Pagriešana
-HISTORY_MSG_61;Pagriešana
-HISTORY_MSG_62;Lēcu kropļojumu labošana
-HISTORY_MSG_63;Grāmatzīme izvēlēta
-HISTORY_MSG_64;Kadrējums
-HISTORY_MSG_65;Krāsu nobīdes labošana
-HISTORY_MSG_66;Izgaismojumu atgūšana
-HISTORY_MSG_67;Izgaismojumu atgūšanas apjoms
-HISTORY_MSG_68;Izgaismojumu atgūšanas metode
-HISTORY_MSG_69;Krāsu telpa darbam
-HISTORY_MSG_70;Krāsu telpa izvadei
-HISTORY_MSG_71;Ievades krāsu telpa
-HISTORY_MSG_72;Vinjetes labošana
-HISTORY_MSG_73;Kanālu jaucējs
-HISTORY_MSG_74;Izmēra mērogs
-HISTORY_MSG_75;Izmērmaiņas metode
-HISTORY_MSG_76;Exif metadati
-HISTORY_MSG_77;IPTC metadati
-HISTORY_MSG_78;Norādīti izmērmaiņas dati
-HISTORY_MSG_79;Izmērmaiņas platums
-HISTORY_MSG_80;Izmērmaiņas augstums
-HISTORY_MSG_81;Izmērmaiņa ieslēgta
-HISTORY_NEWSNAPSHOT;Jauna grāmtzīme
-HISTORY_SNAPSHOT;Grāmtzīme
-HISTORY_SNAPSHOTS;Grāmtzīmes
-IPTCPANEL_CATEGORY;Kategorija
-IPTCPANEL_CITY;Pilsēta
-IPTCPANEL_COPYHINT;Kopēt IPTC iestatījumus uz starpliku
-IPTCPANEL_COUNTRY;Valsts
-IPTCPANEL_CREDIT;Pateicība
-IPTCPANEL_CREDITHINT;Identificē attēla sniedzēju, nav obligāti radītājs vai īpašnieks (Credit).
-IPTCPANEL_DATECREATED;Izveidošanas datums
-IPTCPANEL_EMBEDDED;Iegultais
-IPTCPANEL_EMBEDDEDHINT;Attiestatīt uz attēla iegultajiem IPTC datiem
-IPTCPANEL_HEADLINE;Konspekts
-IPTCPANEL_INSTRUCTIONS;Norādījumi
-IPTCPANEL_KEYWORDS;Atslēgvārdi
-IPTCPANEL_PASTEHINT;Ielīmēt IPTC iestatījumus no starplikas
-IPTCPANEL_RESET;Atiestate
-IPTCPANEL_RESETHINT;Atiestatīt uz profila noklusējumu
-IPTCPANEL_SOURCE;Avots
-IPTCPANEL_TITLE;Nosaukums
-MAIN_BUTTON_PREFERENCES;Iestatījumi
-MAIN_BUTTON_SAVE;Saglabāt attēlu
-MAIN_BUTTON_SENDTOEDITOR;Sūtīt uz redaktoru
-MAIN_FRAME_BATCHQUEUE;Batch Queue
-MAIN_FRAME_FILEBROWSER;File Browser
-MAIN_FRAME_PLACES;Places
-MAIN_FRAME_PLACES_ADD;Add
-MAIN_FRAME_RECENT;Recent Folders
-MAIN_MSG_ALREADYEXISTS;Fails jau ir.
-MAIN_MSG_CANNOTLOAD;Nevaru ielādēt attēlu
-MAIN_MSG_CANNOTSAVE;Faila saglabāšanas kļūda
-MAIN_MSG_CANNOTSTARTEDITOR;Nevar uzsākt redaktoru.
-MAIN_MSG_CANNOTSTARTEDITOR_SECONDARY;Lūdzu ievadiet pareizu ceļu dialogā "Uzstādījumi".
-MAIN_MSG_QOVERWRITE;Vai pārrakstīt to?
-MAIN_TAB_COLOR;Krāsa
-MAIN_TAB_DETAIL;Detaļas
-MAIN_TAB_DEVELOP;Develop
-MAIN_TAB_EXIF;Exif
-MAIN_TAB_EXPOSURE;Ekspozīcija
-MAIN_TAB_FILTER;Filter
-MAIN_TAB_IPTC;IPTC
-MAIN_TAB_METADATA;Metadati
-MAIN_TAB_TRANSFORM;Pārveidot
-MAIN_TOOLTIP_HIDEHP;Rādīt/slēpt kreiso ielaidumu (ieskaitot vēsturi, saīsne: H)
-MAIN_TOOLTIP_INDCLIPPEDH;Izgaismojumu cirpšanas pazīme
-MAIN_TOOLTIP_INDCLIPPEDS;Ēnu cirpšanas pazīme
-MAIN_TOOLTIP_QINFO;Ātrā info uz attēla
-PARTIALPASTE_BASICGROUP;Pamata uzstādījumi
-PARTIALPASTE_CACORRECTION;Krāsu novirzes labošana
-PARTIALPASTE_COARSETRANS;90 grādu rotēšana / apmešana
-PARTIALPASTE_COLORGROUP;Krāsu uzstādījumi
-PARTIALPASTE_COMPOSITIONGROUP;Kompozīcijas uzstādījumi
-PARTIALPASTE_CROP;Apcirpt
-PARTIALPASTE_DIALOGLABEL;Daļēji ielīmēt apstrādes profilu
-PARTIALPASTE_DISTORTION;Kropļojumu labošana
-PARTIALPASTE_EXIFCHANGES;exif datu izmaiņas
-PARTIALPASTE_EXPOSURE;Ekspozīcija
-PARTIALPASTE_ICMSETTINGS;ICM uzstādījumi
-PARTIALPASTE_IPTCINFO;IPTC info
-PARTIALPASTE_LENSGROUP;Lēcas uzstādījumi
-PARTIALPASTE_METAGROUP;Metadati
-PARTIALPASTE_RESIZE;Izmērmaiņa
-PARTIALPASTE_ROTATION;Rotācija
-PARTIALPASTE_SHADOWSHIGHLIGHTS;Ēnas/izgaismojumi
-PARTIALPASTE_SHARPENING;Asināšana
-PARTIALPASTE_VIGNETTING;Vinjetes labošana
-PARTIALPASTE_WHITEBALANCE;Baltā līdzsvarss
-PREFERENCES_APPLNEXTSTARTUP;lietos nākamā reizē
-PREFERENCES_CACHEMAXENTRIES;Maksimālais keša ierakstu skaits
-PREFERENCES_CACHEOPTS;Keša opcijas
-PREFERENCES_CACHETHUMBHEIGHT;Keša maksimālais sīktēla augstums
-PREFERENCES_CLIPPINGIND;Cirpšanas pazīme
-PREFERENCES_DATEFORMAT;Datuma formāts
-PREFERENCES_DATEFORMATHINT;Jūs varat lietot šāduas formatēšanas parametrus:\n%y : gads\n%m : mēnesis\n%d : diena\n\nPiemēram, ungāru datuma formāts ir:\n%y/%m/%d
-PREFERENCES_DIRHOME;Mājas mape
-PREFERENCES_DIRLAST;Pēdējā lietotā mape
-PREFERENCES_DIROTHER;Cita
-PREFERENCES_DIRSELECTDLG;Izvēlies attēlu mapi sākumam...
-PREFERENCES_DIRSOFTWARE;Uzstādīšanas mape
-PREFERENCES_EXTERNALEDITOR;Ārējais redaktors
-PREFERENCES_FBROWSEROPTS;Failu pārlūka iespējas
-PREFERENCES_FILEFORMAT;Faila formāts
-PREFERENCES_FORIMAGE;Attēlu failiem
-PREFERENCES_FORRAW;RAW failiem
-PREFERENCES_GIMPPATH;GIMP instalācijas direktorijs
-PREFERENCES_HLTHRESHOLD;Cirpto izgaismojumu slieksnis
-PREFERENCES_ICCDIR;ICC profilu mape
-PREFERENCES_IMPROCPARAMS;Noklusētie attēla apstrādes parametri
-PREFERENCES_INTENT_ABSOLUTE;Absolūtā kolorimetrija
-PREFERENCES_INTENT_PERCEPTUAL;Uztverams
-PREFERENCES_INTENT_RELATIVE;Relatīvā kolorimetrija
-PREFERENCES_INTENT_SATURATION;Piesātinājums
-PREFERENCES_OUTDIR;Izvades mape
-PREFERENCES_OUTDIRFOLDER;Saglabāt mapē
-PREFERENCES_OUTDIRFOLDERHINT;Likt saglabātos attēlus norādītajā mapē
-PREFERENCES_OUTDIRTEMPLATE;Lietot veidni
-PREFERENCES_OUTDIRTEMPLATEHINT;Jūs varat lietot šādas formatēšanas virknes:\n%f, %d1, %d2, ..., %p1, %p2, ...\n\nŠīs formatēšanas virknes attiecas uz direktorijiem un RAW faila apakšceļiem.\n\nPiemēram, ja ir atvērts /home/tom/image/02-09-2006/dsc0012.nef, formatējuma virkņu nozīme ir:\n%f=dsc0012, %d1=02-09-2006, %d2=image, ...\n%p1=/home/tom/image/02-09-2006, %p2=/home/tom/image, p3=/home/tom, ...\n\nJa vēlaties rezultātu saglabāt turpat pie oriģināla, rakstiet:\n%p1/%f\n\nJa vēlaties rezultātu saglabāt direktorijā 'converted' pie oriģināla, rakstiet:\n%p1/converted/%f\n\nJa vēlaties rezultātu saglabāt direktorijā '/home/tom/converted' paturot to pašu datumu apakšdirektoriju, rakstiet:\n%p2/converted/%d1/%f
-PREFERENCES_PARSEDEXT;Parsētie paplašīnājumi
-PREFERENCES_PARSEDEXTADD;Pielikt paplašinājumu
-PREFERENCES_PARSEDEXTADDHINT;Ierakstiet paplašinājumu un nospiediet šo pogu lai pievienotu sarakstam
-PREFERENCES_PARSEDEXTDELHINT;Dzēst atzīmēto paplašinājumu no saraksta
-PREFERENCES_PROFILEHANDLING;Apstrādes profilu politika
-PREFERENCES_PROFILELOADPR;Profilu ielādes prioritāte
-PREFERENCES_PROFILEPRCACHE;Profils kešā
-PREFERENCES_PROFILEPRFILE;Profils pie ievades faila
-PREFERENCES_PROFILESAVECACHE;Saglabāt apstrādes profilu kešā
-PREFERENCES_PROFILESAVEINPUT;Saglabāt apstrādes profilu pie ievades faila
-PREFERENCES_PSPATH;Adobe Photoshop instalācijas direktorijs
-PREFERENCES_SELECTLANG;Izvēlies valodu
-PREFERENCES_SHOWBASICEXIF;Rādīt Exif pamatdatus
-PREFERENCES_SHOWDATETIME;Rādīt datumu un laiku
-PREFERENCES_SHTHRESHOLD;Cirpto ēnu slieksnis
-PREFERENCES_STARTUPIMDIR;Attēlu mape sākumā
-PREFERENCES_TAB_BROWSER;Failu pārlūks
-PREFERENCES_TAB_COLORMGR;Krāsu pārvaldība
-PREFERENCES_TAB_GENERAL;Vispārīgi
-PREFERENCES_TAB_IMPROC;Attēlu apstrāde
-PROFILEPANEL_LABEL;Apstrādes profili
-PROFILEPANEL_LOADDLGLABEL;Ielādēt apstrādes profilu...
-PROFILEPANEL_PCUSTOM;Pielāgots
-PROFILEPANEL_PFILE;No faila
-PROFILEPANEL_PLASTSAVED;Pēdējais saglabātais
-PROFILEPANEL_SAVEDLGLABEL;Saglabāt apstrādes profilu...
-PROFILEPANEL_TOOLTIPCOPY;Kopēt esošo profilu uz starpliku
-PROFILEPANEL_TOOLTIPLOAD;Ielādēt profilu no faila
-PROFILEPANEL_TOOLTIPPASTE;Ielīmēt profilu no starplikas
-PROFILEPANEL_TOOLTIPSAVE;Saglabāt šībrīža profilu
-PROGRESSBAR_LOADING;Attēla ielāde...
-PROGRESSBAR_LOADJPEG;Ielādēju JPEG failu...
-PROGRESSBAR_LOADPNG;Ielādēju PNG failu...
-PROGRESSBAR_LOADTIFF;Ielādēju TIFF failu...
-PROGRESSBAR_PROCESSING;Attēla apstrāde...
-PROGRESSBAR_READY;Gatavs
-PROGRESSBAR_SAVEJPEG;Saglabāju JPEG failu...
-PROGRESSBAR_SAVEPNG;Saglabāju PNG failu...
-PROGRESSBAR_SAVETIFF;Saglabāju TIFF failu...
-QINFO_ISO;ISO
-QINFO_NOEXIF;Exif dati nav pieejami.
-SAVEDLG_FILEFORMAT;Faila formāts
-SAVEDLG_JPEGQUAL;JPEG Kvalitāte
-SAVEDLG_PNGCOMPR;PNG Spiešana
-SAVEDLG_PUTTOQUEUE;Likt apstrādes rindā
-SAVEDLG_PUTTOQUEUEHEAD;Likt apstrādes rindas sākumā
-SAVEDLG_PUTTOQUEUETAIL;Likt apstrādes rindas beigās
-SAVEDLG_SAVEIMMEDIATELY;Saglabāt tūlīt
-SAVEDLG_SAVESPP;Saglabāt apstrādes profilu ar attēlu
-TOOLBAR_TOOLTIP_CROP;Kadrēšanas rīks (saīsne: C)
-TOOLBAR_TOOLTIP_HAND;Plaukstas rīks (saīsne: N)
-TOOLBAR_TOOLTIP_STRAIGHTEN;Līmeņošanas rīks (saīsne: S)
-TOOLBAR_TOOLTIP_WB;Punkta baltā līdzsvara rīks (saīsne: W)
-TP_CACORRECTION_BLUE;Zils
-TP_CACORRECTION_LABEL;Lēcas krāsu nobīdes
-TP_CACORRECTION_RED;Sarkans
-TP_CHMIXER_BLUE;Zils
-TP_CHMIXER_GREEN;Zaļš
-TP_CHMIXER_LABEL;Kanālu jaucējs
-TP_CHMIXER_RED;Sarkans
-TP_COARSETRAF_TOOLTIP_HFLIP;Apmest horizontāli
-TP_COARSETRAF_TOOLTIP_ROTLEFT;Pagriezt pa kreisi
-TP_COARSETRAF_TOOLTIP_ROTRIGHT;Pagriezt pa labi
-TP_COARSETRAF_TOOLTIP_VFLIP;Apmest vertikāli
-TP_CROP_FIXRATIO;Attiecība:
-TP_CROP_GTDIAGONALS;Diagonāles
-TP_CROP_GTNONE;Nekādas
-TP_CROP_GTRULETHIRDS;Trešdaļas
-TP_CROP_GUIDETYPE;Vadlīnijas:
-TP_CROP_H;A
-TP_CROP_LABEL;Kadrējums
-TP_CROP_W;P
-TP_CROP_X;x
-TP_CROP_Y;y
-TP_DISTORTION_AMOUNT;Apjoms
-TP_DISTORTION_LABEL;Lēcas kropļojums
-TP_EXPOSURE_AUTOLEVELS;Auto Līmeņi
-TP_EXPOSURE_BLACKLEVEL;Melnais
-TP_EXPOSURE_BRIGHTNESS;Gaišums
-TP_EXPOSURE_CLIP;Cirpt
-TP_EXPOSURE_COMPRHIGHLIGHTS;Izgaismojumu spiešana
-TP_EXPOSURE_COMPRSHADOWS;Ēnu spiešana
-TP_EXPOSURE_CONTRAST;Kontrasts
-TP_EXPOSURE_CURVEEDITOR;Toņa līkne
-TP_EXPOSURE_EXPCOMP;Eksp. nobīde
-TP_EXPOSURE_LABEL;Ekspozīcija
-TP_HLREC_CIELAB;CIELab maisījums
-TP_HLREC_COLOR;Krāsu pavairošana
-TP_HLREC_LABEL;Izgaismojumu atgūšana
-TP_HLREC_LUMINANCE;Spīduma atgūšana
-TP_HLREC_METHOD;Metode:
-TP_ICM_INPUTCAMERA;Kameras noklusētais
-TP_ICM_INPUTCUSTOM;Pielāgots
-TP_ICM_INPUTDLGLABEL;Izvēlies Ievades ICC Profilu...
-TP_ICM_INPUTEMBEDDED;Lietot iegulto, ja var
-TP_ICM_INPUTPROFILE;Ievades profils
-TP_ICM_LABEL;ICM
-TP_ICM_NOICM;Bez ICM: sRGB izvade
-TP_ICM_OUTPUTPROFILE;Izvades profils
-TP_ICM_WORKINGPROFILE;Darba profils
-TP_RAW_DMETHOD;Metode
-TP_RAW_FALSECOLOR;Neīsto krāsu slāpēšanas soļi
-TP_RESIZE_H;A:
-TP_RESIZE_LABEL;Izmērmaiņa
-TP_RESIZE_METHOD;Metode:
-TP_RESIZE_NEAREST;Tuvākais
-TP_RESIZE_SCALE;Mērogs
-TP_RESIZE_W;P:
-TP_ROTATE_DEGREE;Grādi
-TP_ROTATE_LABEL;Pagriezt
-TP_ROTATE_SELECTLINE; Norādīt līmeni
-TP_SHADOWSHLIGHTS_HIGHLIGHTS;Izgaismojumi
-TP_SHADOWSHLIGHTS_HLTONALW;Toņa platums
-TP_SHADOWSHLIGHTS_LABEL;Ēnas/Izgaismojumi
-TP_SHADOWSHLIGHTS_LOCALCONTR;Vietējais kontrasts
-TP_SHADOWSHLIGHTS_RADIUS;Radiuss
-TP_SHADOWSHLIGHTS_SHADOWS;Ēnas
-TP_SHADOWSHLIGHTS_SHTONALW;Toņa platums
-TP_SHARPENING_AMOUNT;Apjoms
-TP_SHARPENING_EDRADIUS;Radiuss
-TP_SHARPENING_EDTOLERANCE;Iecietība pret malām
-TP_SHARPENING_HALOCONTROL;Caurumu kontole
-TP_SHARPENING_HCAMOUNT;Apjoms
-TP_SHARPENING_LABEL;Asināšana
-TP_SHARPENING_METHOD;Metode
-TP_SHARPENING_ONLYEDGES;Asināt tikai malas
-TP_SHARPENING_RADIUS;Radiuss
-TP_SHARPENING_RLD;RL atritināšana
-TP_SHARPENING_RLD_AMOUNT;Apjoms
-TP_SHARPENING_RLD_DAMPING;Slāpēšana
-TP_SHARPENING_RLD_ITERATIONS;Soļi
-TP_SHARPENING_THRESHOLD;Slieksnis
-TP_SHARPENING_USM;Neasā maska
-TP_VIGNETTING_AMOUNT;Apjoms
-TP_VIGNETTING_LABEL;Vinjetes Labošana
-TP_VIGNETTING_RADIUS;Radiuss
-TP_WBALANCE_AUTO;Auto
-TP_WBALANCE_CAMERA;Kamera
-TP_WBALANCE_CUSTOM;Pielāgots
-TP_WBALANCE_GREEN;Nokrāsa
-TP_WBALANCE_LABEL;Baltā līdzsvars
-TP_WBALANCE_METHOD;Metode
-TP_WBALANCE_SIZE;izmērs:
-TP_WBALANCE_SPOTWB;Punkta BL
-TP_WBALANCE_TEMPERATURE;Temperatūra
-#
-
-!!!!!!!!!!!!!!!!!!!!!!!!!
-! Untranslated keys follow; remove the ! prefix after an entry is translated.
-!!!!!!!!!!!!!!!!!!!!!!!!!
-
-!ABOUT_TAB_BUILD;Version
-!ABOUT_TAB_CREDITS;Credits
-!ABOUT_TAB_LICENSE;License
-!ABOUT_TAB_RELEASENOTES;Release Notes
-!ABOUT_TAB_SPLASH;Splash
-!ADJUSTER_RESET_TO_DEFAULT;Click - reset to default value.\nCtrl+click - reset to initial value.
-!BATCHQUEUE_AUTOSTART;Auto-start
-!BATCHQUEUE_AUTOSTARTHINT;Start processing automatically when a new job arrives.
-!BATCHQUEUE_DESTFILENAME;Path and file name
-!BATCHQUEUE_STARTSTOPHINT;Start or stop processing the images in the queue.\n\nShortcut: Ctrl+s
-!BATCH_PROCESSING;Batch Processing
-!CURVEEDITOR_AXIS_IN;I:
-!CURVEEDITOR_AXIS_LEFT_TAN;LT:
-!CURVEEDITOR_AXIS_OUT;O:
-!CURVEEDITOR_AXIS_RIGHT_TAN;RT:
-!CURVEEDITOR_CATMULLROM;Flexible
-!CURVEEDITOR_CURVE;Curve
-!CURVEEDITOR_CURVES;Curves
-!CURVEEDITOR_CUSTOM;Standard
-!CURVEEDITOR_DARKS;Darks
-!CURVEEDITOR_EDITPOINT_HINT;Enable edition of node in/out values.\n\nRight-click on a node to select it.\nRight-click on empty space to de-select the node.
-!CURVEEDITOR_HIGHLIGHTS;Highlights
-!CURVEEDITOR_LIGHTS;Lights
-!CURVEEDITOR_MINMAXCPOINTS;Equalizer
-!CURVEEDITOR_NURBS;Control cage
-!CURVEEDITOR_PARAMETRIC;Parametric
-!CURVEEDITOR_SHADOWS;Shadows
-!CURVEEDITOR_TOOLTIPCOPY;Copy current curve to clipboard.
-!CURVEEDITOR_TOOLTIPPASTE;Paste curve from clipboard.
-!CURVEEDITOR_TYPE;Type:
-!DONT_SHOW_AGAIN;Don't show this message again.
-!DYNPROFILEEDITOR_DELETE;Delete
-!DYNPROFILEEDITOR_EDIT;Edit
-!DYNPROFILEEDITOR_EDIT_RULE;Edit Dynamic Profile Rule
-!DYNPROFILEEDITOR_ENTRY_TOOLTIP;The matching is case insensitive.\nUse the "re:" prefix to enter\na regular expression.
-!DYNPROFILEEDITOR_IMGTYPE_ANY;Any
-!DYNPROFILEEDITOR_IMGTYPE_HDR;HDR
-!DYNPROFILEEDITOR_IMGTYPE_PS;Pixel Shift
-!DYNPROFILEEDITOR_IMGTYPE_STD;Standard
-!DYNPROFILEEDITOR_MOVE_DOWN;Move Down
-!DYNPROFILEEDITOR_MOVE_UP;Move Up
-!DYNPROFILEEDITOR_NEW;New
-!DYNPROFILEEDITOR_NEW_RULE;New Dynamic Profile Rule
-!DYNPROFILEEDITOR_PROFILE;Processing Profile
-!EDITWINDOW_TITLE;Image Edit
-!EDIT_OBJECT_TOOLTIP;Displays a widget on the preview window which lets you adjust this tool.
-!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
-!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
-!EXIFFILTER_FILETYPE;File type
-!EXIFFILTER_IMAGETYPE;Image type
-!EXIFFILTER_METADATAFILTER;Enable metadata filters
-!EXIFPANEL_SHOWALL;Show all
-!EXPORT_BYPASS;Processing steps to bypass
-!EXPORT_BYPASS_ALL;Select / Unselect All
-!EXPORT_BYPASS_DEFRINGE;Bypass Defringe
-!EXPORT_BYPASS_DIRPYRDENOISE;Bypass Noise Reduction
-!EXPORT_BYPASS_DIRPYREQUALIZER;Bypass Contrast by Detail Levels
-!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
-!EXPORT_BYPASS_RAW_CA;Bypass [raw] Chromatic Aberration Correction
-!EXPORT_BYPASS_RAW_CCSTEPS;Bypass [raw] False Color Suppression
-!EXPORT_BYPASS_RAW_DCB_ENHANCE;Bypass [raw] DCB Enhancement Steps
-!EXPORT_BYPASS_RAW_DCB_ITERATIONS;Bypass [raw] DCB Iterations
-!EXPORT_BYPASS_RAW_DF;Bypass [raw] Dark-Frame
-!EXPORT_BYPASS_RAW_FF;Bypass [raw] Flat-Field
-!EXPORT_BYPASS_RAW_GREENTHRESH;Bypass [raw] Green Equilibration
-!EXPORT_BYPASS_RAW_LINENOISE;Bypass [raw] Line Noise Filter
-!EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Bypass [raw] LMMSE Enhancement Steps
-!EXPORT_BYPASS_SHARPENEDGE;Bypass Edge Sharpening
-!EXPORT_BYPASS_SHARPENING;Bypass Sharpening
-!EXPORT_BYPASS_SHARPENMICRO;Bypass Microcontrast
-!EXPORT_BYPASS_SH_HQ;Bypass Sharp Mask Shadows/Highlights
-!EXPORT_FASTEXPORTOPTIONS;Fast Export Options
-!EXPORT_INSTRUCTIONS;Fast Export options provide overrides to bypass time and resource consuming development settings and to run queue processing using the fast export settings instead. This method is recommended for quicker generation of lower resolution images when speed is a priority or when resized output is desired for one or many images without making modifications to their saved development parameters.
-!EXPORT_MAXHEIGHT;Maximum height:
-!EXPORT_MAXWIDTH;Maximum width:
-!EXPORT_PIPELINE;Processing pipeline
-!EXPORT_PUTTOQUEUEFAST; Put to queue for fast export
-!EXPORT_RAW_DMETHOD;Demosaic method
-!EXPORT_USE_FAST_PIPELINE;Dedicated (full processing on resized image)
-!EXPORT_USE_FAST_PIPELINE_TIP;Use a dedicated processing pipeline for images in Fast Export mode, that trades speed for quality. Resizing of the image is done as early as possible, instead of doing it at the end like in the normal pipeline. The speedup can be significant, but be prepared to see artifacts and a general degradation of output quality.
-!EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
-!EXTPROGTARGET_1;raw
-!EXTPROGTARGET_2;queue-processed
-!FILEBROWSER_ADDDELTEMPLATE;Add/Del templates...
-!FILEBROWSER_APPLYPROFILE_PARTIAL;Apply - partial
-!FILEBROWSER_AUTODARKFRAME;Auto dark-frame
-!FILEBROWSER_AUTOFLATFIELD;Auto flat-field
-!FILEBROWSER_BROWSEPATHBUTTONHINT;Click to open specified path, reload folder and apply "find" keywords.
-!FILEBROWSER_BROWSEPATHHINT;Type a path to navigate to.\n\nKeyboard shortcuts:\nCtrl-o to focus to the path text box.\nEnter / Ctrl-Enter to browse there;\nEsc to clear changes.\nShift-Esc to remove focus.\n\nPath shortcuts:\n~ - user's home directory.\n! - user's pictures directory
-!FILEBROWSER_CACHE;Cache
-!FILEBROWSER_CACHECLEARFROMFULL;Clear all including cached profiles
-!FILEBROWSER_CACHECLEARFROMPARTIAL;Clear all except cached profiles
-!FILEBROWSER_COLORLABEL_TOOLTIP;Color label.\n\nUse dropdown menu or shortcuts:\nShift-Ctrl-0 No Color\nShift-Ctrl-1 Red\nShift-Ctrl-2 Yellow\nShift-Ctrl-3 Green\nShift-Ctrl-4 Blue\nShift-Ctrl-5 Purple
-!FILEBROWSER_CURRENT_NAME;Current name:
-!FILEBROWSER_DARKFRAME;Dark-frame
-!FILEBROWSER_DELETEDLGMSGINCLPROC;Are you sure you want to delete the selected %1 files including a queue-processed version?
-!FILEBROWSER_EXTPROGMENU;Open with
-!FILEBROWSER_FLATFIELD;Flat-Field
-!FILEBROWSER_MOVETODARKFDIR;Move to dark-frames directory
-!FILEBROWSER_MOVETOFLATFIELDDIR;Move to flat-fields directory
-!FILEBROWSER_NEW_NAME;New name:
-!FILEBROWSER_OPENDEFAULTVIEWER;Windows default viewer (queue-processed)
-!FILEBROWSER_POPUPCOLORLABEL;Color label
-!FILEBROWSER_POPUPCOLORLABEL0;Label: None
-!FILEBROWSER_POPUPCOLORLABEL1;Label: Red
-!FILEBROWSER_POPUPCOLORLABEL2;Label: Yellow
-!FILEBROWSER_POPUPCOLORLABEL3;Label: Green
-!FILEBROWSER_POPUPCOLORLABEL4;Label: Blue
-!FILEBROWSER_POPUPCOLORLABEL5;Label: Purple
-!FILEBROWSER_POPUPCOPYTO;Copy to...
-!FILEBROWSER_POPUPFILEOPERATIONS;File operations
-!FILEBROWSER_POPUPMOVETO;Move to...
-!FILEBROWSER_POPUPPROCESSFAST;Put to queue (Fast export)
-!FILEBROWSER_POPUPPROFILEOPERATIONS;Processing profile operations
-!FILEBROWSER_POPUPRANK;Rank
-!FILEBROWSER_POPUPRANK0;Unrank
-!FILEBROWSER_POPUPRANK1;Rank 1 *
-!FILEBROWSER_POPUPRANK2;Rank 2 **
-!FILEBROWSER_POPUPRANK3;Rank 3 ***
-!FILEBROWSER_POPUPRANK4;Rank 4 ****
-!FILEBROWSER_POPUPRANK5;Rank 5 *****
-!FILEBROWSER_POPUPREMOVEINCLPROC;Delete with output from queue
-!FILEBROWSER_QUERYBUTTONHINT;Clear the Find query
-!FILEBROWSER_QUERYHINT;Type filenames to search for. Supports partial filenames. Separate the search terms using commas, e.g.\n1001,1004,1199\n\nExclude search terms by prefixing them with !=\ne.g.\n!=1001,1004,1199\n\nShortcuts:\nCtrl-f - focus the Find box,\nEnter - search,\nEsc - clear the Find box,\nShift-Esc - defocus the Find box.
-!FILEBROWSER_QUERYLABEL; Find:
-!FILEBROWSER_RANK1_TOOLTIP;Rank 1 *\nShortcut: Shift-1
-!FILEBROWSER_RANK2_TOOLTIP;Rank 2 *\nShortcut: Shift-2
-!FILEBROWSER_RANK3_TOOLTIP;Rank 3 *\nShortcut: Shift-3
-!FILEBROWSER_RANK4_TOOLTIP;Rank 4 *\nShortcut: Shift-4
-!FILEBROWSER_RANK5_TOOLTIP;Rank 5 *\nShortcut: Shift-5
-!FILEBROWSER_RESETDEFAULTPROFILE;Reset to default
-!FILEBROWSER_SELECTDARKFRAME;Select dark-frame...
-!FILEBROWSER_SELECTFLATFIELD;Select flat-field...
-!FILEBROWSER_SHOWCOLORLABEL1HINT;Show images labeled Red.\nShortcut: Alt-1
-!FILEBROWSER_SHOWCOLORLABEL2HINT;Show images labeled Yellow.\nShortcut: Alt-2
-!FILEBROWSER_SHOWCOLORLABEL3HINT;Show images labeled Green.\nShortcut: Alt-3
-!FILEBROWSER_SHOWCOLORLABEL4HINT;Show images labeled Blue.\nShortcut: Alt-4
-!FILEBROWSER_SHOWCOLORLABEL5HINT;Show images labeled Purple.\nShortcut: Alt-5
-!FILEBROWSER_SHOWEDITEDHINT;Show edited images.\nShortcut: 7
-!FILEBROWSER_SHOWEDITEDNOTHINT;Show not edited images.\nShortcut: 6
-!FILEBROWSER_SHOWEXIFINFO;Show Exif info.\n\nShortcuts:\ni - Multiple Editor Tabs Mode,\nAlt-i - Single Editor Tab Mode.
-!FILEBROWSER_SHOWNOTTRASHHINT;Show only non-deleted images.
-!FILEBROWSER_SHOWORIGINALHINT;Show only original images.\n\nWhen several images exist with the same filename but different extensions, the one considered original is the one whose extension is nearest the top of the parsed extensions list in Preferences > File Browser > Parsed Extensions.
-!FILEBROWSER_SHOWRECENTLYSAVEDHINT;Show saved images.\nShortcut: Alt-7
-!FILEBROWSER_SHOWRECENTLYSAVEDNOTHINT;Show unsaved images.\nShortcut: Alt-6
-!FILEBROWSER_SHOWUNCOLORHINT;Show images without a color label.\nShortcut: Alt-0
-!FILEBROWSER_UNRANK_TOOLTIP;Unrank.\nShortcut: Shift-0
-!FILECHOOSER_FILTER_ANY;All files
-!FILECHOOSER_FILTER_COLPROF;Color profiles (*.icc)
-!FILECHOOSER_FILTER_CURVE;Curve files
-!FILECHOOSER_FILTER_LCP;Lens correction profiles
-!FILECHOOSER_FILTER_PP;Processing profiles
-!FILECHOOSER_FILTER_SAME;Same format as current photo
-!FILECHOOSER_FILTER_TIFF;TIFF files
-!GENERAL_AFTER;After
-!GENERAL_APPLY;Apply
-!GENERAL_ASIMAGE;As Image
-!GENERAL_AUTO;Automatic
-!GENERAL_BEFORE;Before
-!GENERAL_CLOSE;Close
-!GENERAL_CURRENT;Current
-!GENERAL_FILE;File
-!GENERAL_NONE;None
-!GENERAL_OPEN;Open
-!GENERAL_RESET;Reset
-!GENERAL_SAVE_AS;Save as...
-!GENERAL_SLIDER;Slider
-!GENERAL_UNCHANGED;(Unchanged)
-!GENERAL_WARNING;Warning
-!GIMP_PLUGIN_INFO;Welcome to the RawTherapee GIMP plugin!\nOnce you are done editing, simply close the main RawTherapee window and the image will be automatically imported in GIMP.
-!HISTOGRAM_TOOLTIP_BAR;Show/Hide RGB indicator bar.
-!HISTOGRAM_TOOLTIP_CHRO;Show/Hide chromaticity histogram.
-!HISTOGRAM_TOOLTIP_MODE;Toggle between linear, log-linear and log-log scaling of the histogram.
-!HISTOGRAM_TOOLTIP_RAW;Show/Hide raw histogram.
-!HISTORY_MSG_82;Profile changed
-!HISTORY_MSG_83;S/H - Sharp mask
-!HISTORY_MSG_84;Perspective correction
-!HISTORY_MSG_85;Lens Correction - LCP file
-!HISTORY_MSG_86;RGB Curves - Luminosity mode
-!HISTORY_MSG_87;Impulse Noise Reduction
-!HISTORY_MSG_88;Impulse NR threshold
-!HISTORY_MSG_89;Noise Reduction
-!HISTORY_MSG_90;NR - Luminance
-!HISTORY_MSG_91;NR - Chrominance master
-!HISTORY_MSG_92;NR - Gamma
-!HISTORY_MSG_93;CbDL - Value
-!HISTORY_MSG_94;Contrast by Detail Levels
-!HISTORY_MSG_95;L*a*b* - Chromaticity
-!HISTORY_MSG_96;L*a*b* - a* curve
-!HISTORY_MSG_97;L*a*b* - b* curve
-!HISTORY_MSG_98;Demosaicing method
-!HISTORY_MSG_99;Hot pixel filter
-!HISTORY_MSG_100;Exposure - Saturation
-!HISTORY_MSG_101;HSV - Hue
-!HISTORY_MSG_102;HSV - Saturation
-!HISTORY_MSG_103;HSV - Value
-!HISTORY_MSG_104;HSV Equalizer
-!HISTORY_MSG_105;Defringe
-!HISTORY_MSG_106;Defringe - Radius
-!HISTORY_MSG_107;Defringe - Threshold
-!HISTORY_MSG_108;Exposure - HLC threshold
-!HISTORY_MSG_109;Resize - Bounding box
-!HISTORY_MSG_110;Resize - Applies to
-!HISTORY_MSG_111;L*a*b* - Avoid color shift
-!HISTORY_MSG_112;--unused--
-!HISTORY_MSG_113;L*a*b* - Red/skin prot.
-!HISTORY_MSG_114;DCB iterations
-!HISTORY_MSG_115;False color suppression
-!HISTORY_MSG_116;DCB enhancement
-!HISTORY_MSG_117;Raw CA correction - Red
-!HISTORY_MSG_118;Raw CA correction - Blue
-!HISTORY_MSG_119;Line noise filter
-!HISTORY_MSG_120;Green equilibration
-!HISTORY_MSG_121;Raw CA Correction - Auto
-!HISTORY_MSG_122;Dark-Frame - Auto-selection
-!HISTORY_MSG_123;Dark-Frame - File
-!HISTORY_MSG_124;White point correction
-!HISTORY_MSG_126;Flat-Field - File
-!HISTORY_MSG_127;Flat-Field - Auto-selection
-!HISTORY_MSG_128;Flat-Field - Blur radius
-!HISTORY_MSG_129;Flat-Field - Blur type
-!HISTORY_MSG_130;Auto distortion correction
-!HISTORY_MSG_131;NR - Luma
-!HISTORY_MSG_132;NR - Chroma
-!HISTORY_MSG_133;Output gamma
-!HISTORY_MSG_134;Free gamma
-!HISTORY_MSG_135;Free gamma
-!HISTORY_MSG_136;Free gamma slope
-!HISTORY_MSG_137;Black level - Green 1
-!HISTORY_MSG_138;Black level - Red
-!HISTORY_MSG_139;Black level - Blue
-!HISTORY_MSG_140;Black level - Green 2
-!HISTORY_MSG_141;Black level - Link greens
-!HISTORY_MSG_142;ES - Iterations
-!HISTORY_MSG_143;ES - Quantity
-!HISTORY_MSG_144;Microcontrast - Quantity
-!HISTORY_MSG_145;Microcontrast - Uniformity
-!HISTORY_MSG_146;Edge sharpening
-!HISTORY_MSG_147;ES - Luminance only
-!HISTORY_MSG_148;Microcontrast
-!HISTORY_MSG_149;Microcontrast - 3×3 matrix
-!HISTORY_MSG_150;Post-demosaic artifact/noise red.
-!HISTORY_MSG_151;Vibrance
-!HISTORY_MSG_152;Vib - Pastel tones
-!HISTORY_MSG_153;Vib - Saturated tones
-!HISTORY_MSG_154;Vib - Protect skin-tones
-!HISTORY_MSG_155;Vib - Avoid color shift
-!HISTORY_MSG_156;Vib - Link pastel/saturated
-!HISTORY_MSG_157;Vib - P/S threshold
-!HISTORY_MSG_158;TM - Strength
-!HISTORY_MSG_159;TM - Edge stopping
-!HISTORY_MSG_160;TM - Scale
-!HISTORY_MSG_161;TM - Reweighting iterates
-!HISTORY_MSG_162;Tone Mapping
-!HISTORY_MSG_163;RGB Curves - Red
-!HISTORY_MSG_164;RGB Curves - Green
-!HISTORY_MSG_165;RGB Curves - Blue
-!HISTORY_MSG_166;Exposure - Reset
-!HISTORY_MSG_167;Demosaicing method
-!HISTORY_MSG_168;L*a*b* - CC curve
-!HISTORY_MSG_169;L*a*b* - CH curve
-!HISTORY_MSG_170;Vibrance - HH curve
-!HISTORY_MSG_171;L*a*b* - LC curve
-!HISTORY_MSG_172;L*a*b* - Restrict LC
-!HISTORY_MSG_173;NR - Detail recovery
-!HISTORY_MSG_174;CIECAM02
-!HISTORY_MSG_175;CAM02 - CAT02 adaptation
-!HISTORY_MSG_176;CAM02 - Viewing surround
-!HISTORY_MSG_177;CAM02 - Scene luminosity
-!HISTORY_MSG_178;CAM02 - Viewing luminosity
-!HISTORY_MSG_179;CAM02 - White-point model
-!HISTORY_MSG_180;CAM02 - Lightness (J)
-!HISTORY_MSG_181;CAM02 - Chroma (C)
-!HISTORY_MSG_182;CAM02 - Automatic CAT02
-!HISTORY_MSG_183;CAM02 - Contrast (J)
-!HISTORY_MSG_184;CAM02 - Scene surround
-!HISTORY_MSG_185;CAM02 - Gamut control
-!HISTORY_MSG_186;CAM02 - Algorithm
-!HISTORY_MSG_187;CAM02 - Red/skin prot.
-!HISTORY_MSG_188;CAM02 - Brightness (Q)
-!HISTORY_MSG_189;CAM02 - Contrast (Q)
-!HISTORY_MSG_190;CAM02 - Saturation (S)
-!HISTORY_MSG_191;CAM02 - Colorfulness (M)
-!HISTORY_MSG_192;CAM02 - Hue (h)
-!HISTORY_MSG_193;CAM02 - Tone curve 1
-!HISTORY_MSG_194;CAM02 - Tone curve 2
-!HISTORY_MSG_195;CAM02 - Tone curve 1
-!HISTORY_MSG_196;CAM02 - Tone curve 2
-!HISTORY_MSG_197;CAM02 - Color curve
-!HISTORY_MSG_198;CAM02 - Color curve
-!HISTORY_MSG_199;CAM02 - Output histograms
-!HISTORY_MSG_200;CAM02 - Tone mapping
-!HISTORY_MSG_201;NR - Chrominance - R&G
-!HISTORY_MSG_202;NR - Chrominance - B&Y
-!HISTORY_MSG_203;NR - Color space
-!HISTORY_MSG_204;LMMSE enhancement steps
-!HISTORY_MSG_205;CAM02 - Hot/bad pixel filter
-!HISTORY_MSG_206;CAT02 - Auto scene luminosity
-!HISTORY_MSG_207;Defringe - Hue curve
-!HISTORY_MSG_208;WB - B/R equalizer
-!HISTORY_MSG_210;GF - Angle
-!HISTORY_MSG_211;Graduated Filter
-!HISTORY_MSG_212;VF - Strength
-!HISTORY_MSG_213;Vignette Filter
-!HISTORY_MSG_214;Black-and-White
-!HISTORY_MSG_215;B&W - CM - Red
-!HISTORY_MSG_216;B&W - CM - Green
-!HISTORY_MSG_217;B&W - CM - Blue
-!HISTORY_MSG_218;B&W - Gamma - Red
-!HISTORY_MSG_219;B&W - Gamma - Green
-!HISTORY_MSG_220;B&W - Gamma - Blue
-!HISTORY_MSG_221;B&W - Color filter
-!HISTORY_MSG_222;B&W - Presets
-!HISTORY_MSG_223;B&W - CM - Orange
-!HISTORY_MSG_224;B&W - CM - Yellow
-!HISTORY_MSG_225;B&W - CM - Cyan
-!HISTORY_MSG_226;B&W - CM - Magenta
-!HISTORY_MSG_227;B&W - CM - Purple
-!HISTORY_MSG_228;B&W - Luminance equalizer
-!HISTORY_MSG_229;B&W - Luminance equalizer
-!HISTORY_MSG_230;B&W - Mode
-!HISTORY_MSG_231;B&W - 'Before' curve
-!HISTORY_MSG_232;B&W - 'Before' curve type
-!HISTORY_MSG_233;B&W - 'After' curve
-!HISTORY_MSG_234;B&W - 'After' curve type
-!HISTORY_MSG_235;B&W - CM - Auto
-!HISTORY_MSG_236;--unused--
-!HISTORY_MSG_237;B&W - CM
-!HISTORY_MSG_238;GF - Feather
-!HISTORY_MSG_239;GF - Strength
-!HISTORY_MSG_240;GF - Center
-!HISTORY_MSG_241;VF - Feather
-!HISTORY_MSG_242;VF - Roundness
-!HISTORY_MSG_243;VC - Radius
-!HISTORY_MSG_244;VC - Strength
-!HISTORY_MSG_245;VC - Center
-!HISTORY_MSG_246;L*a*b* - CL curve
-!HISTORY_MSG_247;L*a*b* - LH curve
-!HISTORY_MSG_248;L*a*b* - HH curve
-!HISTORY_MSG_249;CbDL - Threshold
-!HISTORY_MSG_250;NR - Enhanced
-!HISTORY_MSG_251;B&W - Algorithm
-!HISTORY_MSG_252;CbDL - Skin tar/prot
-!HISTORY_MSG_253;CbDL - Reduce artifacts
-!HISTORY_MSG_254;CbDL - Skin hue
-!HISTORY_MSG_255;NR - Median filter
-!HISTORY_MSG_256;NR - Median - Type
-!HISTORY_MSG_257;Color Toning
-!HISTORY_MSG_258;CT - Color curve
-!HISTORY_MSG_259;CT - Opacity curve
-!HISTORY_MSG_260;CT - a*[b*] opacity
-!HISTORY_MSG_261;CT - Method
-!HISTORY_MSG_262;CT - b* opacity
-!HISTORY_MSG_263;CT - Shadows - Red
-!HISTORY_MSG_264;CT - Shadows - Green
-!HISTORY_MSG_265;CT - Shadows - Blue
-!HISTORY_MSG_266;CT - Mid - Red
-!HISTORY_MSG_267;CT - Mid - Green
-!HISTORY_MSG_268;CT - Mid - Blue
-!HISTORY_MSG_269;CT - High - Red
-!HISTORY_MSG_270;CT - High - Green
-!HISTORY_MSG_271;CT - High - Blue
-!HISTORY_MSG_272;CT - Balance
-!HISTORY_MSG_273;CT - Color Balance SMH
-!HISTORY_MSG_274;CT - Sat. Shadows
-!HISTORY_MSG_275;CT - Sat. Highlights
-!HISTORY_MSG_276;CT - Opacity
-!HISTORY_MSG_277;--unused--
-!HISTORY_MSG_278;CT - Preserve luminance
-!HISTORY_MSG_279;CT - Shadows
-!HISTORY_MSG_280;CT - Highlights
-!HISTORY_MSG_281;CT - Sat. strength
-!HISTORY_MSG_282;CT - Sat. threshold
-!HISTORY_MSG_283;CT - Strength
-!HISTORY_MSG_284;CT - Auto sat. protection
-!HISTORY_MSG_285;NR - Median - Method
-!HISTORY_MSG_286;NR - Median - Type
-!HISTORY_MSG_287;NR - Median - Iterations
-!HISTORY_MSG_288;Flat-Field - Clip control
-!HISTORY_MSG_289;Flat-Field - Clip control - Auto
-!HISTORY_MSG_290;Black Level - Red
-!HISTORY_MSG_291;Black Level - Green
-!HISTORY_MSG_292;Black Level - Blue
-!HISTORY_MSG_293;Film Simulation
-!HISTORY_MSG_294;Film Simulation - Strength
-!HISTORY_MSG_295;Film Simulation - Film
-!HISTORY_MSG_296;NR - Luminance curve
-!HISTORY_MSG_297;NR - Mode
-!HISTORY_MSG_298;Dead pixel filter
-!HISTORY_MSG_299;NR - Chrominance curve
-!HISTORY_MSG_300;-
-!HISTORY_MSG_301;NR - Luma control
-!HISTORY_MSG_302;NR - Chroma method
-!HISTORY_MSG_303;NR - Chroma method
-!HISTORY_MSG_304;W - Contrast levels
-!HISTORY_MSG_305;Wavelet Levels
-!HISTORY_MSG_306;W - Process
-!HISTORY_MSG_307;W - Process
-!HISTORY_MSG_308;W - Process direction
-!HISTORY_MSG_309;W - ES - Detail
-!HISTORY_MSG_310;W - Residual - Sky tar/prot
-!HISTORY_MSG_311;W - Wavelet levels
-!HISTORY_MSG_312;W - Residual - Shadows threshold
-!HISTORY_MSG_313;W - Chroma - Sat/past
-!HISTORY_MSG_314;W - Gamut - Reduce artifacts
-!HISTORY_MSG_315;W - Residual - Contrast
-!HISTORY_MSG_316;W - Gamut - Skin tar/prot
-!HISTORY_MSG_317;W - Gamut - Skin hue
-!HISTORY_MSG_318;W - Contrast - Highlight levels
-!HISTORY_MSG_319;W - Contrast - Highlight range
-!HISTORY_MSG_320;W - Contrast - Shadow range
-!HISTORY_MSG_321;W - Contrast - Shadow levels
-!HISTORY_MSG_322;W - Gamut - Avoid color shift
-!HISTORY_MSG_323;W - ES - Local contrast
-!HISTORY_MSG_324;W - Chroma - Pastel
-!HISTORY_MSG_325;W - Chroma - Saturated
-!HISTORY_MSG_326;W - Chroma - Method
-!HISTORY_MSG_327;W - Contrast - Apply to
-!HISTORY_MSG_328;W - Chroma - Link strength
-!HISTORY_MSG_329;W - Toning - Opacity RG
-!HISTORY_MSG_330;W - Toning - Opacity BY
-!HISTORY_MSG_331;W - Contrast levels - Extra
-!HISTORY_MSG_332;W - Tiling method
-!HISTORY_MSG_333;W - Residual - Shadows
-!HISTORY_MSG_334;W - Residual - Chroma
-!HISTORY_MSG_335;W - Residual - Highlights
-!HISTORY_MSG_336;W - Residual - Highlights threshold
-!HISTORY_MSG_337;W - Residual - Sky hue
-!HISTORY_MSG_338;W - ES - Radius
-!HISTORY_MSG_339;W - ES - Strength
-!HISTORY_MSG_340;W - Strength
-!HISTORY_MSG_341;W - Edge performance
-!HISTORY_MSG_342;W - ES - First level
-!HISTORY_MSG_343;W - Chroma levels
-!HISTORY_MSG_344;W - Meth chroma sl/cur
-!HISTORY_MSG_345;W - ES - Local contrast
-!HISTORY_MSG_346;W - ES - Local contrast method
-!HISTORY_MSG_347;W - Denoise - Level 1
-!HISTORY_MSG_348;W - Denoise - Level 2
-!HISTORY_MSG_349;W - Denoise - Level 3
-!HISTORY_MSG_350;W - ES - Edge detection
-!HISTORY_MSG_351;W - Residual - HH curve
-!HISTORY_MSG_352;W - Background
-!HISTORY_MSG_353;W - ES - Gradient sensitivity
-!HISTORY_MSG_354;W - ES - Enhanced
-!HISTORY_MSG_355;W - ES - Threshold low
-!HISTORY_MSG_356;W - ES - Threshold high
-!HISTORY_MSG_357;W - Denoise - Link with ES
-!HISTORY_MSG_358;W - Gamut - CH
-!HISTORY_MSG_359;Hot/Dead - Threshold
-!HISTORY_MSG_360;TM - Gamma
-!HISTORY_MSG_361;W - Final - Chroma balance
-!HISTORY_MSG_362;W - Residual - Compression method
-!HISTORY_MSG_363;W - Residual - Compression strength
-!HISTORY_MSG_364;W - Final - Contrast balance
-!HISTORY_MSG_365;W - Final - Delta balance
-!HISTORY_MSG_366;W - Residual - Compression gamma
-!HISTORY_MSG_367;W - Final - 'After' contrast curve
-!HISTORY_MSG_368;W - Final - Contrast balance
-!HISTORY_MSG_369;W - Final - Balance method
-!HISTORY_MSG_370;W - Final - Local contrast curve
-!HISTORY_MSG_371;Post-Resize Sharpening
-!HISTORY_MSG_372;PRS USM - Radius
-!HISTORY_MSG_373;PRS USM - Amount
-!HISTORY_MSG_374;PRS USM - Threshold
-!HISTORY_MSG_375;PRS USM - Sharpen only edges
-!HISTORY_MSG_376;PRS USM - Edge detection radius
-!HISTORY_MSG_377;PRS USM - Edge tolerance
-!HISTORY_MSG_378;PRS USM - Halo control
-!HISTORY_MSG_379;PRS USM - Halo control amount
-!HISTORY_MSG_380;PRS - Method
-!HISTORY_MSG_381;PRS RLD - Radius
-!HISTORY_MSG_382;PRS RLD - Amount
-!HISTORY_MSG_383;PRS RLD - Damping
-!HISTORY_MSG_384;PRS RLD - Iterations
-!HISTORY_MSG_385;W - Residual - Color Balance
-!HISTORY_MSG_386;W - Residual - CB green high
-!HISTORY_MSG_387;W - Residual - CB blue high
-!HISTORY_MSG_388;W - Residual - CB green mid
-!HISTORY_MSG_389;W - Residual - CB blue mid
-!HISTORY_MSG_390;W - Residual - CB green low
-!HISTORY_MSG_391;W - Residual - CB blue low
-!HISTORY_MSG_392;W - Residual - Color Balance
-!HISTORY_MSG_393;DCP - Look table
-!HISTORY_MSG_394;DCP - Baseline exposure
-!HISTORY_MSG_395;DCP - Base table
-!HISTORY_MSG_396;W - Contrast sub-tool
-!HISTORY_MSG_397;W - Chroma sub-tool
-!HISTORY_MSG_398;W - ES sub-tool
-!HISTORY_MSG_399;W - Residual sub-tool
-!HISTORY_MSG_400;W - Final sub-tool
-!HISTORY_MSG_401;W - Toning sub-tool
-!HISTORY_MSG_402;W - Denoise sub-tool
-!HISTORY_MSG_403;W - ES - Edge sensitivity
-!HISTORY_MSG_404;W - ES - Base amplification
-!HISTORY_MSG_405;W - Denoise - Level 4
-!HISTORY_MSG_406;W - ES - Neighboring pixels
-!HISTORY_MSG_407;Retinex - Method
-!HISTORY_MSG_408;Retinex - Radius
-!HISTORY_MSG_409;Retinex - Contrast
-!HISTORY_MSG_410;Retinex - Offset
-!HISTORY_MSG_411;Retinex - Strength
-!HISTORY_MSG_412;Retinex - Gaussian gradient
-!HISTORY_MSG_413;Retinex - Contrast
-!HISTORY_MSG_414;Retinex - Histogram - Lab
-!HISTORY_MSG_415;Retinex - Transmission
-!HISTORY_MSG_416;Retinex
-!HISTORY_MSG_417;Retinex - Transmission median
-!HISTORY_MSG_418;Retinex - Threshold
-!HISTORY_MSG_419;Retinex - Color space
-!HISTORY_MSG_420;Retinex - Histogram - HSL
-!HISTORY_MSG_421;Retinex - Gamma
-!HISTORY_MSG_422;Retinex - Gamma
-!HISTORY_MSG_423;Retinex - Gamma slope
-!HISTORY_MSG_424;Retinex - HL threshold
-!HISTORY_MSG_425;Retinex - Log base
-!HISTORY_MSG_426;Retinex - Hue equalizer
-!HISTORY_MSG_427;Output rendering intent
-!HISTORY_MSG_428;Monitor rendering intent
-!HISTORY_MSG_429;Retinex - Iterations
-!HISTORY_MSG_430;Retinex - Transmission gradient
-!HISTORY_MSG_431;Retinex - Strength gradient
-!HISTORY_MSG_432;Retinex - M - Highlights
-!HISTORY_MSG_433;Retinex - M - Highlights TW
-!HISTORY_MSG_434;Retinex - M - Shadows
-!HISTORY_MSG_435;Retinex - M - Shadows TW
-!HISTORY_MSG_436;Retinex - M - Radius
-!HISTORY_MSG_437;Retinex - M - Method
-!HISTORY_MSG_438;Retinex - M - Equalizer
-!HISTORY_MSG_439;Retinex - Process
-!HISTORY_MSG_440;CbDL - Method
-!HISTORY_MSG_441;Retinex - Gain transmission
-!HISTORY_MSG_442;Retinex - Scale
-!HISTORY_MSG_443;Output black point compensation
-!HISTORY_MSG_444;WB - Temp bias
-!HISTORY_MSG_445;Raw sub-image
-!HISTORY_MSG_449;PS - ISO adaption
-!HISTORY_MSG_452;PS - Show motion
-!HISTORY_MSG_453;PS - Show mask only
-!HISTORY_MSG_457;PS - Check red/blue
-!HISTORY_MSG_462;PS - Check green
-!HISTORY_MSG_464;PS - Blur motion mask
-!HISTORY_MSG_465;PS - Blur radius
-!HISTORY_MSG_468;PS - Fill holes
-!HISTORY_MSG_469;PS - Median
-!HISTORY_MSG_471;PS - Motion correction
-!HISTORY_MSG_472;PS - Smooth transitions
-!HISTORY_MSG_473;PS - Use LMMSE
-!HISTORY_MSG_474;PS - Equalize
-!HISTORY_MSG_475;PS - Equalize channel
-!HISTORY_MSG_476;CAM02 - Temp out
-!HISTORY_MSG_477;CAM02 - Green out
-!HISTORY_MSG_478;CAM02 - Yb out
-!HISTORY_MSG_479;CAM02 - CAT02 adaptation out
-!HISTORY_MSG_480;CAM02 - Automatic CAT02 out
-!HISTORY_MSG_481;CAM02 - Temp scene
-!HISTORY_MSG_482;CAM02 - Green scene
-!HISTORY_MSG_483;CAM02 - Yb scene
-!HISTORY_MSG_484;CAM02 - Auto Yb scene
-!HISTORY_MSG_485;Lens Correction
-!HISTORY_MSG_486;Lens Correction - Camera
-!HISTORY_MSG_487;Lens Correction - Lens
-!HISTORY_MSG_488;Dynamic Range Compression
-!HISTORY_MSG_489;DRC - Detail
-!HISTORY_MSG_490;DRC - Amount
-!HISTORY_MSG_491;White Balance
-!HISTORY_MSG_492;RGB Curves
-!HISTORY_MSG_493;L*a*b* Adjustments
-!HISTORY_MSG_CLAMPOOG;Clip out-of-gamut colors
-!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_AB;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_CHANNEL;CT - Channel
-!HISTORY_MSG_COLORTONING_LABREGION_CHROMATICITYMASK;CT - region C mask
-!HISTORY_MSG_COLORTONING_LABREGION_HUEMASK;CT - H mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESS;CT - Lightness
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESSMASK;CT - L mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIST;CT - List
-!HISTORY_MSG_COLORTONING_LABREGION_MASKBLUR;CT - region mask blur
-!HISTORY_MSG_COLORTONING_LABREGION_OFFSET;CT - region offset
-!HISTORY_MSG_COLORTONING_LABREGION_POWER;CT - region power
-!HISTORY_MSG_COLORTONING_LABREGION_SATURATION;CT - Saturation
-!HISTORY_MSG_COLORTONING_LABREGION_SHOWMASK;CT - region show mask
-!HISTORY_MSG_COLORTONING_LABREGION_SLOPE;CT - region slope
-!HISTORY_MSG_DEHAZE_DEPTH;Dehaze - Depth
-!HISTORY_MSG_DEHAZE_ENABLED;Haze Removal
-!HISTORY_MSG_DEHAZE_SHOW_DEPTH_MAP;Dehaze - Show depth map
-!HISTORY_MSG_DEHAZE_STRENGTH;Dehaze - Strength
-!HISTORY_MSG_DUALDEMOSAIC_AUTO_CONTRAST;Dual demosaic - Auto threshold
-!HISTORY_MSG_DUALDEMOSAIC_CONTRAST;Dual demosaic - Contrast threshold
-!HISTORY_MSG_HISTMATCHING;Auto-matched tone curve
-!HISTORY_MSG_ICM_OUTPUT_PRIMARIES;Output - Primaries
-!HISTORY_MSG_ICM_OUTPUT_TEMP;Output - ICC-v4 illuminant D
-!HISTORY_MSG_ICM_OUTPUT_TYPE;Output - Type
-!HISTORY_MSG_ICM_WORKING_GAMMA;Working - Gamma
-!HISTORY_MSG_ICM_WORKING_SLOPE;Working - Slope
-!HISTORY_MSG_ICM_WORKING_TRC_METHOD;Working - TRC method
-!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
-!HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness
-!HISTORY_MSG_LOCALCONTRAST_ENABLED;Local Contrast
-!HISTORY_MSG_LOCALCONTRAST_LIGHTNESS;Local Contrast - Lightness
-!HISTORY_MSG_LOCALCONTRAST_RADIUS;Local Contrast - Radius
-!HISTORY_MSG_METADATA_MODE;Metadata copy mode
-!HISTORY_MSG_MICROCONTRAST_CONTRAST;Microcontrast - Contrast threshold
-!HISTORY_MSG_PIXELSHIFT_DEMOSAIC;PS - Demosaic method for motion
-!HISTORY_MSG_PREPROCESS_LINEDENOISE_DIRECTION;Line noise filter direction
-!HISTORY_MSG_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!HISTORY_MSG_PRSHARPEN_CONTRAST;PRS - Contrast threshold
-!HISTORY_MSG_RAWCACORR_AUTOIT;Raw CA Correction - Iterations
-!HISTORY_MSG_RAWCACORR_COLORSHIFT;Raw CA Correction - Avoid color shift
-!HISTORY_MSG_RAW_BORDER;Raw border
-!HISTORY_MSG_RESIZE_ALLOWUPSCALING;Resize - Allow upscaling
-!HISTORY_MSG_SHARPENING_BLUR;Sharpening - Blur radius
-!HISTORY_MSG_SHARPENING_CONTRAST;Sharpening - Contrast threshold
-!HISTORY_MSG_SH_COLORSPACE;S/H - Colorspace
-!HISTORY_MSG_SOFTLIGHT_ENABLED;Soft light
-!HISTORY_MSG_SOFTLIGHT_STRENGTH;Soft light - Strength
-!HISTORY_MSG_TM_FATTAL_ANCHOR;DRC - Anchor
-!HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s
-!ICCPROFCREATOR_COPYRIGHT;Copyright:
-!ICCPROFCREATOR_COPYRIGHT_RESET_TOOLTIP;Reset to the default copyright, granted to "RawTherapee, CC0"
-!ICCPROFCREATOR_CUSTOM;Custom
-!ICCPROFCREATOR_DESCRIPTION;Description:
-!ICCPROFCREATOR_DESCRIPTION_ADDPARAM;Append gamma and slope values to the description
-!ICCPROFCREATOR_DESCRIPTION_TOOLTIP;Leave empty to set the default description.
-!ICCPROFCREATOR_GAMMA;Gamma
-!ICCPROFCREATOR_ICCVERSION;ICC version:
-!ICCPROFCREATOR_ILL;Illuminant:
-!ICCPROFCREATOR_ILL_41;D41
-!ICCPROFCREATOR_ILL_50;D50
-!ICCPROFCREATOR_ILL_55;D55
-!ICCPROFCREATOR_ILL_60;D60
-!ICCPROFCREATOR_ILL_65;D65
-!ICCPROFCREATOR_ILL_80;D80
-!ICCPROFCREATOR_ILL_DEF;Default
-!ICCPROFCREATOR_ILL_INC;StdA 2856K
-!ICCPROFCREATOR_ILL_TOOLTIP;You can only set the illuminant for ICC v4 profiles.
-!ICCPROFCREATOR_PRIMARIES;Primaries:
-!ICCPROFCREATOR_PRIM_ACESP0;ACES AP0
-!ICCPROFCREATOR_PRIM_ACESP1;ACES AP1
-!ICCPROFCREATOR_PRIM_ADOBE;Adobe RGB (1998)
-!ICCPROFCREATOR_PRIM_BEST;BestRGB
-!ICCPROFCREATOR_PRIM_BETA;BetaRGB
-!ICCPROFCREATOR_PRIM_BLUX;Blue X
-!ICCPROFCREATOR_PRIM_BLUY;Blue Y
-!ICCPROFCREATOR_PRIM_BRUCE;BruceRGB
-!ICCPROFCREATOR_PRIM_GREX;Green X
-!ICCPROFCREATOR_PRIM_GREY;Green Y
-!ICCPROFCREATOR_PRIM_PROPH;Prophoto
-!ICCPROFCREATOR_PRIM_REC2020;Rec2020
-!ICCPROFCREATOR_PRIM_REDX;Red X
-!ICCPROFCREATOR_PRIM_REDY;Red Y
-!ICCPROFCREATOR_PRIM_SRGB;sRGB
-!ICCPROFCREATOR_PRIM_TOOLTIP;You can only set custom primaries for ICC v4 profiles.
-!ICCPROFCREATOR_PRIM_WIDEG;Widegamut
-!ICCPROFCREATOR_PROF_V2;ICC v2
-!ICCPROFCREATOR_PROF_V4;ICC v4
-!ICCPROFCREATOR_SAVEDIALOG_TITLE;Save ICC profile as...
-!ICCPROFCREATOR_SLOPE;Slope
-!ICCPROFCREATOR_TRC_PRESET;Tone response curve:
-!IPTCPANEL_CATEGORYHINT;Identifies the subject of the image in the opinion of the provider.
-!IPTCPANEL_CITYHINT;Enter the name of the city pictured in this image.
-!IPTCPANEL_COPYRIGHT;Copyright notice
-!IPTCPANEL_COPYRIGHTHINT;Enter a Notice on the current owner of the Copyright for this image, such as ©2008 Jane Doe.
-!IPTCPANEL_COUNTRYHINT;Enter the name of the country pictured in this image.
-!IPTCPANEL_CREATOR;Creator
-!IPTCPANEL_CREATORHINT;Enter the name of the person that created this image.
-!IPTCPANEL_CREATORJOBTITLE;Creator's job title
-!IPTCPANEL_CREATORJOBTITLEHINT;Enter the Job Title of the person listed in the Creator field.
-!IPTCPANEL_DATECREATEDHINT;Enter the Date the image was taken.
-!IPTCPANEL_DESCRIPTION;Description
-!IPTCPANEL_DESCRIPTIONHINT;Enter a "caption" describing the who, what, and why of what is happening in this image, this might include names of people, and/or their role in the action that is taking place within the image.
-!IPTCPANEL_DESCRIPTIONWRITER;Description writer
-!IPTCPANEL_DESCRIPTIONWRITERHINT;Enter the name of the person involved in writing, editing or correcting the description of the image.
-!IPTCPANEL_HEADLINEHINT;Enter a brief publishable synopsis or summary of the contents of the image.
-!IPTCPANEL_INSTRUCTIONSHINT;Enter information about embargoes, or other restrictions not covered by the Copyright field.
-!IPTCPANEL_KEYWORDSHINT;Enter any number of keywords, terms or phrases used to express the subject matter in the image.
-!IPTCPANEL_PROVINCE;Province or state
-!IPTCPANEL_PROVINCEHINT;Enter the name of the province or state pictured in this image.
-!IPTCPANEL_SOURCEHINT;Enter or edit the name of a person or party who has a role in the content supply chain, such as a person or entity from whom you received this image from.
-!IPTCPANEL_SUPPCATEGORIES;Supplemental categories
-!IPTCPANEL_SUPPCATEGORIESHINT;Further refines the subject of the image.
-!IPTCPANEL_TITLEHINT;Enter a short verbal and human readable name for the image, this may be the file name.
-!IPTCPANEL_TRANSREFERENCE;Job ID
-!IPTCPANEL_TRANSREFERENCEHINT;Enter a number or identifier needed for workflow control or tracking.
-!MAIN_BUTTON_FULLSCREEN;Fullscreen
-!MAIN_BUTTON_ICCPROFCREATOR;ICC Profile Creator
-!MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4
-!MAIN_BUTTON_NAVPREV_TOOLTIP;Navigate to the previous image relative to image opened in the Editor.\nShortcut: Shift-F3\n\nTo navigate to the previous image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F3
-!MAIN_BUTTON_NAVSYNC_TOOLTIP;Synchronize the File Browser or Filmstrip with the Editor to reveal the thumbnail of the currently opened image, and clear any active filters.\nShortcut: x\n\nAs above, but without clearing active filters:\nShortcut: y\n(Note that the thumbnail of the opened image will not be shown if filtered out).
-!MAIN_BUTTON_PUTTOQUEUE_TOOLTIP;Put current image to processing queue.\nShortcut: Ctrl+b
-!MAIN_BUTTON_SAVE_TOOLTIP;Save current image.\nShortcut: Ctrl+s\nSave current profile (.pp3).\nShortcut: Ctrl+Shift+s
-!MAIN_BUTTON_SENDTOEDITOR_TOOLTIP;Edit current image in external editor.\nShortcut: Ctrl+e
-!MAIN_BUTTON_SHOWHIDESIDEPANELS_TOOLTIP;Show/hide all side panels.\nShortcut: m
-!MAIN_BUTTON_UNFULLSCREEN;Exit fullscreen
-!MAIN_FRAME_BATCHQUEUE_TOOLTIP;Processing queue.\nShortcut: Ctrl-F3
-!MAIN_FRAME_EDITOR;Editor
-!MAIN_FRAME_EDITOR_TOOLTIP;Editor.\nShortcut: Ctrl-F4
-!MAIN_FRAME_FILEBROWSER_TOOLTIP;File browser.\nShortcut: Ctrl-F2
-!MAIN_FRAME_PLACES_DEL;Remove
-!MAIN_MSG_EMPTYFILENAME;Filename unspecified!
-!MAIN_MSG_IMAGEUNPROCESSED;This command requires all selected images to be queue-processed first.
-!MAIN_MSG_NAVIGATOR;Navigator
-!MAIN_MSG_OPERATIONCANCELLED;Operation cancelled
-!MAIN_MSG_PATHDOESNTEXIST;The path\n\n%1\n\ndoes not exist. Please set a correct path in Preferences.
-!MAIN_MSG_SETPATHFIRST;You first have to set a target path in Preferences in order to use this function!
-!MAIN_MSG_TOOMANYOPENEDITORS;Too many open editors.\nPlease close an editor to continue.
-!MAIN_MSG_WRITEFAILED;Failed to write\n"%1"\n\nMake sure that the folder exists and that you have write permission to it.
-!MAIN_TAB_ADVANCED;Advanced
-!MAIN_TAB_ADVANCED_TOOLTIP;Shortcut: Alt-w
-!MAIN_TAB_COLOR_TOOLTIP;Shortcut: Alt-c
-!MAIN_TAB_DETAIL_TOOLTIP;Shortcut: Alt-d
-!MAIN_TAB_EXPORT; Fast Export
-!MAIN_TAB_EXPOSURE_TOOLTIP;Shortcut: Alt-e
-!MAIN_TAB_FAVORITES;Favorites
-!MAIN_TAB_FAVORITES_TOOLTIP;Shortcut: Alt-u
-!MAIN_TAB_INSPECT; Inspect
-!MAIN_TAB_METADATA_TOOLTIP;Shortcut: Alt-m
-!MAIN_TAB_RAW;Raw
-!MAIN_TAB_RAW_TOOLTIP;Shortcut: Alt-r
-!MAIN_TAB_TRANSFORM_TOOLTIP;Shortcut: Alt-t
-!MAIN_TOOLTIP_BACKCOLOR0;Background color of the preview: theme-based\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR1;Background color of the preview: black\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR2;Background color of the preview: white\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR3;Background color of the preview: middle grey\nShortcut: 9
-!MAIN_TOOLTIP_BEFOREAFTERLOCK;Lock / Unlock the Before view\n\nLock: keep the Before view unchanged.\nUseful to evaluate the cumulative effect of multiple tools.\nAdditionally, comparisons can be made to any state in the History.\n\nUnlock: the Before view will follow the After view one step behind, showing the image before the effect of the currently used tool.
-!MAIN_TOOLTIP_PREVIEWB;Preview the blue channel.\nShortcut: b
-!MAIN_TOOLTIP_PREVIEWFOCUSMASK;Preview the focus mask.\nShortcut: Shift-f\n\nMore accurate on images with shallow depth of field, low noise and at higher zoom levels.\nZoom out to 10-30% to improve detection accuracy on noisy images.
-!MAIN_TOOLTIP_PREVIEWG;Preview the green channel.\nShortcut: g
-!MAIN_TOOLTIP_PREVIEWL;Preview the luminosity.\nShortcut: v\n\n0.299*R + 0.587*G + 0.114*B
-!MAIN_TOOLTIP_PREVIEWR;Preview the red channel.\nShortcut: r
-!MAIN_TOOLTIP_PREVIEWSHARPMASK;Preview the sharpening contrast mask.\nShortcut: p\n\nOnly works when sharpening is enabled and zoom >= 100%.
-!MAIN_TOOLTIP_SHOWHIDELP1;Show/Hide the left panel.\nShortcut: l
-!MAIN_TOOLTIP_SHOWHIDERP1;Show/Hide the right panel.\nShortcut: Alt-l
-!MAIN_TOOLTIP_SHOWHIDETP1;Show/Hide the top panel.\nShortcut: Shift-l
-!MAIN_TOOLTIP_THRESHOLD;Threshold
-!MAIN_TOOLTIP_TOGGLE;Toggle the Before/After view.\nShortcut: Shift-b
-!MONITOR_PROFILE_SYSTEM;System default
-!NAVIGATOR_B;B:
-!NAVIGATOR_G;G:
-!NAVIGATOR_H;H:
-!NAVIGATOR_LAB_A;a*:
-!NAVIGATOR_LAB_B;b*:
-!NAVIGATOR_LAB_L;L*:
-!NAVIGATOR_NA; --
-!NAVIGATOR_R;R:
-!NAVIGATOR_S;S:
-!NAVIGATOR_V;V:
-!NAVIGATOR_XY_FULL;Width: %1, Height: %2
-!NAVIGATOR_XY_NA;x: --, y: --
-!OPTIONS_BUNDLED_MISSING;The bundled profile "%1" could not be found!\n\nYour installation could be damaged.\n\nDefault internal values will be used instead.
-!OPTIONS_DEFIMG_MISSING;The default profile for non-raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!OPTIONS_DEFRAW_MISSING;The default profile for raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!PARTIALPASTE_ADVANCEDGROUP;Advanced Settings
-!PARTIALPASTE_CHANNELMIXER;Channel mixer
-!PARTIALPASTE_CHANNELMIXERBW;Black-and-white
-!PARTIALPASTE_COLORAPP;CIECAM02
-!PARTIALPASTE_COLORTONING;Color toning
-!PARTIALPASTE_COMMONTRANSFORMPARAMS;Auto-fill
-!PARTIALPASTE_DARKFRAMEAUTOSELECT;Dark-frame auto-selection
-!PARTIALPASTE_DARKFRAMEFILE;Dark-frame file
-!PARTIALPASTE_DEFRINGE;Defringe
-!PARTIALPASTE_DEHAZE;Haze removal
-!PARTIALPASTE_DETAILGROUP;Detail Settings
-!PARTIALPASTE_DIRPYRDENOISE;Noise reduction
-!PARTIALPASTE_DIRPYREQUALIZER;Contrast by detail levels
-!PARTIALPASTE_EPD;Tone mapping
-!PARTIALPASTE_EQUALIZER;Wavelet levels
-!PARTIALPASTE_EVERYTHING;Everything
-!PARTIALPASTE_FILMSIMULATION;Film simulation
-!PARTIALPASTE_FLATFIELDAUTOSELECT;Flat-field auto-selection
-!PARTIALPASTE_FLATFIELDBLURRADIUS;Flat-field blur radius
-!PARTIALPASTE_FLATFIELDBLURTYPE;Flat-field blur type
-!PARTIALPASTE_FLATFIELDCLIPCONTROL;Flat-field clip control
-!PARTIALPASTE_FLATFIELDFILE;Flat-field file
-!PARTIALPASTE_GRADIENT;Graduated filter
-!PARTIALPASTE_HSVEQUALIZER;HSV equalizer
-!PARTIALPASTE_IMPULSEDENOISE;Impulse noise reduction
-!PARTIALPASTE_LABCURVE;L*a*b* adjustments
-!PARTIALPASTE_LENSPROFILE;Profiled lens correction
-!PARTIALPASTE_LOCALCONTRAST;Local contrast
-!PARTIALPASTE_METADATA;Metadata mode
-!PARTIALPASTE_PCVIGNETTE;Vignette filter
-!PARTIALPASTE_PERSPECTIVE;Perspective
-!PARTIALPASTE_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!PARTIALPASTE_PREPROCESS_GREENEQUIL;Green equilibration
-!PARTIALPASTE_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!PARTIALPASTE_PREPROCESS_LINEDENOISE;Line noise filter
-!PARTIALPASTE_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!PARTIALPASTE_PRSHARPENING;Post-resize sharpening
-!PARTIALPASTE_RAWCACORR_AUTO;CA auto-correction
-!PARTIALPASTE_RAWCACORR_AVOIDCOLORSHIFT;CA avoid color shift
-!PARTIALPASTE_RAWCACORR_CAREDBLUE;CA red & blue
-!PARTIALPASTE_RAWEXPOS_BLACK;Black levels
-!PARTIALPASTE_RAWEXPOS_LINEAR;White point correction
-!PARTIALPASTE_RAWGROUP;Raw Settings
-!PARTIALPASTE_RAW_BORDER;Raw border
-!PARTIALPASTE_RAW_DCBENHANCE;DCB enhancement
-!PARTIALPASTE_RAW_DCBITERATIONS;DCB iterations
-!PARTIALPASTE_RAW_DMETHOD;Demosaic method
-!PARTIALPASTE_RAW_FALSECOLOR;False color suppression
-!PARTIALPASTE_RAW_IMAGENUM;Sub-image
-!PARTIALPASTE_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!PARTIALPASTE_RAW_PIXELSHIFT;Pixel Shift
-!PARTIALPASTE_RETINEX;Retinex
-!PARTIALPASTE_RGBCURVES;RGB curves
-!PARTIALPASTE_SHARPENEDGE;Edges
-!PARTIALPASTE_SHARPENMICRO;Microcontrast
-!PARTIALPASTE_SOFTLIGHT;Soft light
-!PARTIALPASTE_TM_FATTAL;Dynamic range compression
-!PARTIALPASTE_VIBRANCE;Vibrance
-!PREFERENCES_ADD;Add
-!PREFERENCES_APPEARANCE;Appearance
-!PREFERENCES_APPEARANCE_COLORPICKERFONT;Color picker font
-!PREFERENCES_APPEARANCE_CROPMASKCOLOR;Crop mask color
-!PREFERENCES_APPEARANCE_MAINFONT;Main font
-!PREFERENCES_APPEARANCE_NAVGUIDECOLOR;Navigator guide color
-!PREFERENCES_APPEARANCE_THEME;Theme
-!PREFERENCES_AUTOMONPROFILE;Use operating system's main monitor color profile
-!PREFERENCES_AUTOSAVE_TP_OPEN;Save tool collapsed/expanded state on exit
-!PREFERENCES_BATCH_PROCESSING;Batch Processing
-!PREFERENCES_BEHADDALL;All to 'Add'
-!PREFERENCES_BEHADDALLHINT;Set all parameters to the Add mode.\nAdjustments of parameters in the batch tool panel will be deltas to the stored values.
-!PREFERENCES_BEHAVIOR;Behavior
-!PREFERENCES_BEHSETALL;All to 'Set'
-!PREFERENCES_BEHSETALLHINT;Set all parameters to the Set mode.\nAdjustments of parameters in the batch tool panel will be absolute, the actual values will be displayed.
-!PREFERENCES_BLACKBODY;Tungsten
-!PREFERENCES_CACHECLEAR;Clear
-!PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
-!PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
-!PREFERENCES_CACHECLEAR_ONLYPROFILES;Clear only cached processing profiles:
-!PREFERENCES_CACHECLEAR_SAFETY;Only files in the cache are cleared. Processing profiles stored alongside the source images are not touched.
-!PREFERENCES_CHUNKSIZES;Tiles per thread
-!PREFERENCES_CHUNKSIZE_RAW_AMAZE;AMaZE demosaic
-!PREFERENCES_CHUNKSIZE_RAW_CA;Raw CA correction
-!PREFERENCES_CHUNKSIZE_RAW_RCD;RCD demosaic
-!PREFERENCES_CHUNKSIZE_RAW_XT;Xtrans demosaic
-!PREFERENCES_CHUNKSIZE_RGB;RGB processing
-!PREFERENCES_CLUTSCACHE;HaldCLUT Cache
-!PREFERENCES_CLUTSCACHE_LABEL;Maximum number of cached CLUTs
-!PREFERENCES_CLUTSDIR;HaldCLUT directory
-!PREFERENCES_CMMBPC;Black point compensation
-!PREFERENCES_CROP;Crop Editing
-!PREFERENCES_CROP_AUTO_FIT;Automatically zoom to fit the crop
-!PREFERENCES_CROP_GUIDES;Guides shown when not editing the crop
-!PREFERENCES_CROP_GUIDES_FRAME;Frame
-!PREFERENCES_CROP_GUIDES_FULL;Original
-!PREFERENCES_CROP_GUIDES_NONE;None
-!PREFERENCES_CURVEBBOXPOS;Position of curve copy & paste buttons
-!PREFERENCES_CURVEBBOXPOS_ABOVE;Above
-!PREFERENCES_CURVEBBOXPOS_BELOW;Below
-!PREFERENCES_CURVEBBOXPOS_LEFT;Left
-!PREFERENCES_CURVEBBOXPOS_RIGHT;Right
-!PREFERENCES_CUSTPROFBUILD;Custom Processing Profile Builder
-!PREFERENCES_CUSTPROFBUILDHINT;Executable (or script) file called when a new initial processing profile should be generated for an image.\n\nThe path of the communication file (*.ini style, a.k.a. "Keyfile") is added as a command line parameter. It contains various parameters required for the scripts and image Exif to allow a rules-based processing profile generation.\n\nWARNING: You are responsible for using double quotes where necessary if you're using paths containing spaces.
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys format
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
-!PREFERENCES_CUSTPROFBUILDPATH;Executable path
-!PREFERENCES_D50;Settings in main menu
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_D55;5500K
-!PREFERENCES_D60;6000K
-!PREFERENCES_D65;6500K
-!PREFERENCES_DARKFRAMEFOUND;Found
-!PREFERENCES_DARKFRAMESHOTS;shots
-!PREFERENCES_DARKFRAMETEMPLATES;templates
-!PREFERENCES_DIRDARKFRAMES;Dark-frames directory
-!PREFERENCES_DIRECTORIES;Directories
-!PREFERENCES_EDITORCMDLINE;Custom command line
-!PREFERENCES_EDITORLAYOUT;Editor layout
-!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_FLATFIELDFOUND;Found
-!PREFERENCES_FLATFIELDSDIR;Flat-fields directory
-!PREFERENCES_FLATFIELDSHOTS;shots
-!PREFERENCES_FLATFIELDTEMPLATES;templates
-!PREFERENCES_FLUOF2;Fluorescent F2
-!PREFERENCES_FLUOF7;Fluorescent F7
-!PREFERENCES_FLUOF11;Fluorescent F11
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY;Output device's Yb luminance (%)
-!PREFERENCES_GREY05;Yb=05 CIE L#30
-!PREFERENCES_GREY10;Yb=10 CIE L#40
-!PREFERENCES_GREY15;Yb=15 CIE L#45
-!PREFERENCES_GREY18;Settings in main menu
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREY23;Yb=23 CIE L#55
-!PREFERENCES_GREY30;Yb=30 CIE L#60
-!PREFERENCES_GREY40;Yb=40 CIE L#70
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram in left panel
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
-!PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
-!PREFERENCES_INSPECT_LABEL;Inspect
-!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
-!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
-!PREFERENCES_INTERNALTHUMBIFUNTOUCHED;Show embedded JPEG thumbnail if raw is unedited
-!PREFERENCES_LANG;Language
-!PREFERENCES_LANGAUTODETECT;Use system language
-!PREFERENCES_MAXRECENTFOLDERS;Maximum number of recent folders
-!PREFERENCES_MENUGROUPEXTPROGS;Group "Open with"
-!PREFERENCES_MENUGROUPFILEOPERATIONS;Group "File operations"
-!PREFERENCES_MENUGROUPLABEL;Group "Color label"
-!PREFERENCES_MENUGROUPPROFILEOPERATIONS;Group "Processing profile operations"
-!PREFERENCES_MENUGROUPRANK;Group "Rank"
-!PREFERENCES_MENUOPTIONS;Context Menu Options
-!PREFERENCES_METADATA;Metadata
-!PREFERENCES_MONINTENT;Default rendering intent
-!PREFERENCES_MONITOR;Monitor
-!PREFERENCES_MONPROFILE;Default color profile
-!PREFERENCES_MONPROFILE_WARNOSX;Due to MacOS limitations, only sRGB is supported.
-!PREFERENCES_MULTITAB;Multiple Editor Tabs Mode
-!PREFERENCES_MULTITABDUALMON;Multiple Editor Tabs In Own Window Mode
-!PREFERENCES_NAVIGATIONFRAME;Navigation
-!PREFERENCES_OVERLAY_FILENAMES;Overlay filenames on thumbnails in the file browser
-!PREFERENCES_OVERLAY_FILENAMES_FILMSTRIP;Overlay filenames on thumbnails in the editor pannel
-!PREFERENCES_OVERWRITEOUTPUTFILE;Overwrite existing output files
-!PREFERENCES_PANFACTORLABEL;Pan rate amplification
-!PREFERENCES_PARSEDEXTDOWNHINT;Move selected extension down in the list.
-!PREFERENCES_PARSEDEXTUPHINT;Move selected extension up in the list.
-!PREFERENCES_PERFORMANCE_MEASURE;Measure
-!PREFERENCES_PERFORMANCE_MEASURE_HINT;Logs processing times in console
-!PREFERENCES_PERFORMANCE_THREADS;Threads
-!PREFERENCES_PERFORMANCE_THREADS_LABEL;Maximum number of threads for Noise Reduction and Wavelet Levels (0 = Automatic)
-!PREFERENCES_PREVDEMO;Preview Demosaic Method
-!PREFERENCES_PREVDEMO_FAST;Fast
-!PREFERENCES_PREVDEMO_LABEL;Demosaicing method used for the preview at <100% zoom:
-!PREFERENCES_PREVDEMO_SIDECAR;As in PP3
-!PREFERENCES_PRINTER;Printer (Soft-Proofing)
-!PREFERENCES_PROFILESAVEBOTH;Save processing profile both to the cache and next to the input file
-!PREFERENCES_PROFILESAVELOCATION;Processing profile saving location
-!PREFERENCES_PROFILE_NONE;None
-!PREFERENCES_PROPERTY;Property
-!PREFERENCES_PRTINTENT;Rendering intent
-!PREFERENCES_PRTPROFILE;Color profile
-!PREFERENCES_REMEMBERZOOMPAN;Remember zoom % and pan offset
-!PREFERENCES_REMEMBERZOOMPAN_TOOLTIP;Remember the zoom % and pan offset of the current image when opening a new image.\n\nThis option only works in "Single Editor Tab Mode" and when "Demosaicing method used for the preview at <100% zoom" is set to "As in PP3".
-!PREFERENCES_SAVE_TP_OPEN_NOW;Save tool collapsed/expanded state now
-!PREFERENCES_SERIALIZE_TIFF_READ;TIFF Read Settings
-!PREFERENCES_SERIALIZE_TIFF_READ_LABEL;Serialize reading of TIFF files
-!PREFERENCES_SERIALIZE_TIFF_READ_TOOLTIP;Enabling this option when working with folders containing uncompressed TIFF files can increase performance of thumbnail generation.
-!PREFERENCES_SET;Set
-!PREFERENCES_SHOWEXPOSURECOMPENSATION;Append exposure compensation
-!PREFERENCES_SHOWFILMSTRIPTOOLBAR;Show Filmstrip toolbar
-!PREFERENCES_SINGLETAB;Single Editor Tab Mode
-!PREFERENCES_SINGLETABVERTAB;Single Editor Tab Mode, Vertical Tabs
-!PREFERENCES_SND_BATCHQUEUEDONE;Queue processing done
-!PREFERENCES_SND_HELP;Enter a full file path to set a sound, or leave blank for no sound.\nFor system sounds on Windows use "SystemDefault", "SystemAsterisk" etc., and on Linux use "complete", "window-attention" etc.
-!PREFERENCES_SND_LNGEDITPROCDONE;Editor processing done
-!PREFERENCES_SND_THRESHOLDSECS;After seconds
-!PREFERENCES_TAB_DYNAMICPROFILE;Dynamic Profile Rules
-!PREFERENCES_TAB_PERFORMANCE;Performance
-!PREFERENCES_TAB_SOUND;Sounds
-!PREFERENCES_THUMBNAIL_INSPECTOR_JPEG;Embedded JPEG preview
-!PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TP_LABEL;Tool panel:
-!PREFERENCES_TP_VSCROLLBAR;Hide vertical scrollbar
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
-!PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-!PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
-!PREFERENCES_WORKFLOW;Layout
-!PROFILEPANEL_COPYPPASTE;Parameters to copy
-!PROFILEPANEL_GLOBALPROFILES;Bundled profiles
-!PROFILEPANEL_LOADPPASTE;Parameters to load
-!PROFILEPANEL_MODE_TIP;Processing profile fill mode.\n\nButton pressed: partial profiles will be converted to full profiles; the missing values will be replaced with hard-coded defaults.\n\nButton released: profiles will be applied as they are, altering only those values which they contain.
-!PROFILEPANEL_MYPROFILES;My profiles
-!PROFILEPANEL_PASTEPPASTE;Parameters to paste
-!PROFILEPANEL_PDYNAMIC;Dynamic
-!PROFILEPANEL_PINTERNAL;Neutral
-!PROFILEPANEL_SAVEPPASTE;Parameters to save
-!PROGRESSBAR_DECODING;Decoding...
-!PROGRESSBAR_GREENEQUIL;Green equilibration...
-!PROGRESSBAR_HLREC;Highlight reconstruction...
-!PROGRESSBAR_HOTDEADPIXELFILTER;Hot/dead pixel filter...
-!PROGRESSBAR_LINEDENOISE;Line noise filter...
-!PROGRESSBAR_LOADINGTHUMBS;Loading thumbnails...
-!PROGRESSBAR_NOIMAGES;No images found
-!PROGRESSBAR_PROCESSING_PROFILESAVED;Processing profile saved
-!PROGRESSBAR_RAWCACORR;Raw CA correction...
-!PROGRESSBAR_SNAPSHOT_ADDED;Snapshot added
-!PROGRESSDLG_PROFILECHANGEDINBROWSER;Processing profile changed in browser
-!QINFO_FRAMECOUNT;%2 frames
-!QINFO_HDR;HDR / %2 frame(s)
-!QINFO_PIXELSHIFT;Pixel Shift / %2 frame(s)
-!SAMPLEFORMAT_0;Unknown data format
-!SAMPLEFORMAT_1;8-bit unsigned
-!SAMPLEFORMAT_2;16-bit unsigned
-!SAMPLEFORMAT_4;24-bit LogLuv
-!SAMPLEFORMAT_8;32-bit LogLuv
-!SAMPLEFORMAT_16;16-bit floating-point
-!SAMPLEFORMAT_32;24-bit floating-point
-!SAMPLEFORMAT_64;32-bit floating-point
-!SAVEDLG_AUTOSUFFIX;Automatically add a suffix if the file already exists
-!SAVEDLG_FILEFORMAT_FLOAT; floating-point
-!SAVEDLG_FORCEFORMATOPTS;Force saving options
-!SAVEDLG_SUBSAMP;Subsampling
-!SAVEDLG_SUBSAMP_1;Best compression
-!SAVEDLG_SUBSAMP_2;Balanced
-!SAVEDLG_SUBSAMP_3;Best quality
-!SAVEDLG_SUBSAMP_TOOLTIP;Best compression:\nJ:a:b 4:2:0\nh/v 2/2\nChroma halved horizontally and vertically.\n\nBalanced:\nJ:a:b 4:2:2\nh/v 2/1\nChroma halved horizontally.\n\nBest quality:\nJ:a:b 4:4:4\nh/v 1/1\nNo chroma subsampling.
-!SAVEDLG_TIFFUNCOMPRESSED;Uncompressed TIFF
-!SAVEDLG_WARNFILENAME;File will be named
-!SHCSELECTOR_TOOLTIP;Click right mouse button to reset the position of those 3 sliders.
-!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
-!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!THRESHOLDSELECTOR_B;Bottom
-!THRESHOLDSELECTOR_BL;Bottom-left
-!THRESHOLDSELECTOR_BR;Bottom-right
-!THRESHOLDSELECTOR_HINT;Hold the Shift key to move individual control points.
-!THRESHOLDSELECTOR_T;Top
-!THRESHOLDSELECTOR_TL;Top-left
-!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
-!TP_BWMIX_ALGO;Algorithm OYCPM
-!TP_BWMIX_ALGO_LI;Linear
-!TP_BWMIX_ALGO_SP;Special effects
-!TP_BWMIX_ALGO_TOOLTIP;Linear: will produce a normal linear response.\nSpecial effects: will produce special effects by mixing channels non-linearly.
-!TP_BWMIX_AUTOCH;Auto
-!TP_BWMIX_CC_ENABLED;Adjust complementary color
-!TP_BWMIX_CC_TOOLTIP;Enable to allow automatic adjustment of complementary colors in ROYGCBPM mode.
-!TP_BWMIX_CHANNEL;Luminance equalizer
-!TP_BWMIX_CURVEEDITOR1;'Before' curve
-!TP_BWMIX_CURVEEDITOR2;'After' curve
-!TP_BWMIX_CURVEEDITOR_AFTER_TOOLTIP;Tone curve, after B&W conversion, at the end of treatment.
-!TP_BWMIX_CURVEEDITOR_BEFORE_TOOLTIP;Tone curve, just before B&W conversion.\nMay take into account the color components.
-!TP_BWMIX_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H).\nPay attention to extreme values as they may cause artifacts.
-!TP_BWMIX_FILTER;Color Filter
-!TP_BWMIX_FILTER_BLUE;Blue
-!TP_BWMIX_FILTER_BLUEGREEN;Blue-Green
-!TP_BWMIX_FILTER_GREEN;Green
-!TP_BWMIX_FILTER_GREENYELLOW;Green-Yellow
-!TP_BWMIX_FILTER_NONE;None
-!TP_BWMIX_FILTER_PURPLE;Purple
-!TP_BWMIX_FILTER_RED;Red
-!TP_BWMIX_FILTER_REDYELLOW;Red-Yellow
-!TP_BWMIX_FILTER_TOOLTIP;The color filter simulates shots taken with a colored filter placed in front of the lens. Colored filters reduce the transmission of specific color ranges and therefore affect their lightness. E.g. a red filter darkens blue skies.
-!TP_BWMIX_FILTER_YELLOW;Yellow
-!TP_BWMIX_GAMMA;Gamma Correction
-!TP_BWMIX_GAM_TOOLTIP;Correct gamma for each RGB channel.
-!TP_BWMIX_LABEL;Black-and-White
-!TP_BWMIX_MET;Method
-!TP_BWMIX_MET_CHANMIX;Channel Mixer
-!TP_BWMIX_MET_DESAT;Desaturation
-!TP_BWMIX_MET_LUMEQUAL;Luminance Equalizer
-!TP_BWMIX_MIXC;Channel Mixer
-!TP_BWMIX_NEUTRAL;Reset
-!TP_BWMIX_RGBLABEL;R: %1%% G: %2%% B: %3%% Total: %4%%
-!TP_BWMIX_RGBLABEL_HINT;Final RGB factors that take care of all the mixer options.\n"Total" displays the sum of the RGB values:\n- always 100% in relative mode\n- higher (lighter) or lower (darker) than 100% in absolute mode.
-!TP_BWMIX_RGB_TOOLTIP;Mix the RGB channels. Use presets for guidance.\nPay attention to negative values that may cause artifacts or erratic behavior.
-!TP_BWMIX_SETTING;Presets
-!TP_BWMIX_SETTING_TOOLTIP;Different presets (film, landscape, etc.) or manual Channel Mixer settings.
-!TP_BWMIX_SET_HIGHCONTAST;High contrast
-!TP_BWMIX_SET_HIGHSENSIT;High Sensitivity
-!TP_BWMIX_SET_HYPERPANCHRO;Hyper Panchromatic
-!TP_BWMIX_SET_INFRARED;Infrared
-!TP_BWMIX_SET_LANDSCAPE;Landscape
-!TP_BWMIX_SET_LOWSENSIT;Low Sensitivity
-!TP_BWMIX_SET_LUMINANCE;Luminance
-!TP_BWMIX_SET_NORMCONTAST;Normal Contrast
-!TP_BWMIX_SET_ORTHOCHRO;Orthochromatic
-!TP_BWMIX_SET_PANCHRO;Panchromatic
-!TP_BWMIX_SET_PORTRAIT;Portrait
-!TP_BWMIX_SET_RGBABS;Absolute RGB
-!TP_BWMIX_SET_RGBREL;Relative RGB
-!TP_BWMIX_SET_ROYGCBPMABS;Absolute ROYGCBPM
-!TP_BWMIX_SET_ROYGCBPMREL;Relative ROYGCBPM
-!TP_BWMIX_TCMODE_FILMLIKE;B&W Film-like
-!TP_BWMIX_TCMODE_SATANDVALBLENDING;B&W Saturation and Value Blending
-!TP_BWMIX_TCMODE_STANDARD;B&W Standard
-!TP_BWMIX_TCMODE_WEIGHTEDSTD;B&W Weighted Standard
-!TP_BWMIX_VAL;L
-!TP_CBDL_AFT;After Black-and-White
-!TP_CBDL_BEF;Before Black-and-White
-!TP_CBDL_METHOD;Process located
-!TP_CBDL_METHOD_TOOLTIP;Choose whether the Contrast by Detail Levels tool is to be positioned after the Black-and-White tool, which makes it work in L*a*b* space, or before it, which makes it work in RGB space.
-!TP_CHROMATABERR_LABEL;Chromatic Aberration
-!TP_COLORAPP_ABSOLUTELUMINANCE;Absolute luminance
-!TP_COLORAPP_ALGO;Algorithm
-!TP_COLORAPP_ALGO_ALL;All
-!TP_COLORAPP_ALGO_JC;Lightness + Chroma (JC)
-!TP_COLORAPP_ALGO_JS;Lightness + Saturation (JS)
-!TP_COLORAPP_ALGO_QM;Brightness + Colorfulness (QM)
-!TP_COLORAPP_ALGO_TOOLTIP;Lets you choose between parameter subsets or all parameters.
-!TP_COLORAPP_BADPIXSL;Hot/bad pixel filter
-!TP_COLORAPP_BADPIXSL_TOOLTIP;Suppression of hot/bad (brightly colored) pixels.\n0 = No effect\n1 = Median\n2 = Gaussian.\nAlternatively, adjust the image to avoid very dark shadows.\n\nThese artifacts are due to limitations of CIECAM02.
-!TP_COLORAPP_BRIGHT;Brightness (Q)
-!TP_COLORAPP_BRIGHT_TOOLTIP;Brightness in CIECAM02 takes into account the white's luminosity and differs from L*a*b* and RGB brightness.
-!TP_COLORAPP_CAT02ADAPTATION_TOOLTIP;When setting manually, values above 65 are recommended.
-!TP_COLORAPP_CHROMA;Chroma (C)
-!TP_COLORAPP_CHROMA_M;Colorfulness (M)
-!TP_COLORAPP_CHROMA_M_TOOLTIP;Colorfulness in CIECAM02 differs from L*a*b* and RGB colorfulness.
-!TP_COLORAPP_CHROMA_S;Saturation (S)
-!TP_COLORAPP_CHROMA_S_TOOLTIP;Saturation in CIECAM02 differs from L*a*b* and RGB saturation.
-!TP_COLORAPP_CHROMA_TOOLTIP;Chroma in CIECAM02 differs from L*a*b* and RGB chroma.
-!TP_COLORAPP_CIECAT_DEGREE;CAT02 adaptation
-!TP_COLORAPP_CONTRAST;Contrast (J)
-!TP_COLORAPP_CONTRAST_Q;Contrast (Q)
-!TP_COLORAPP_CONTRAST_Q_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CONTRAST_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CURVEEDITOR1;Tone curve 1
-!TP_COLORAPP_CURVEEDITOR1_TOOLTIP;Shows the histogram of L* (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of J or Q after CIECAM02.\n\nJ and Q are not shown in the main histogram panel.\n\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_CURVEEDITOR2;Tone curve 2
-!TP_COLORAPP_CURVEEDITOR2_TOOLTIP;Same usage as with the second exposure tone curve.
-!TP_COLORAPP_CURVEEDITOR3;Color curve
-!TP_COLORAPP_CURVEEDITOR3_TOOLTIP;Adjust either chroma, saturation or colorfulness.\n\nShows the histogram of chromaticity (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of C, s or M after CIECAM02.\n\nC, s and M are not shown in the main histogram panel.\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_DATACIE;CIECAM02 output histograms in curves
-!TP_COLORAPP_DATACIE_TOOLTIP;When enabled, histograms in CIECAM02 curves show approximate values/ranges for J or Q, and C, s or M after the CIECAM02 adjustments.\nThis selection does not impact the main histogram panel.\n\nWhen disabled, histograms in CIECAM02 curves show L*a*b* values before CIECAM02 adjustments.
-!TP_COLORAPP_FREE;Free temp+green + CAT02 + [output]
-!TP_COLORAPP_GAMUT;Gamut control (L*a*b*)
-!TP_COLORAPP_GAMUT_TOOLTIP;Allow gamut control in L*a*b* mode.
-!TP_COLORAPP_HUE;Hue (h)
-!TP_COLORAPP_HUE_TOOLTIP;Hue (h) - angle between 0° and 360°.
-!TP_COLORAPP_LABEL;CIE Color Appearance Model 2002
-!TP_COLORAPP_LABEL_CAM02;Image Adjustments
-!TP_COLORAPP_LABEL_SCENE;Scene Conditions
-!TP_COLORAPP_LABEL_VIEWING;Viewing Conditions
-!TP_COLORAPP_LIGHT;Lightness (J)
-!TP_COLORAPP_LIGHT_TOOLTIP;Lightness in CIECAM02 differs from L*a*b* and RGB lightness.
-!TP_COLORAPP_MEANLUMINANCE;Mean luminance (Yb%)
-!TP_COLORAPP_MODEL;WP Model
-!TP_COLORAPP_MODEL_TOOLTIP;White-Point Model.\n\nWB [RT] + [output]: RT's white balance is used for the scene, CIECAM02 is set to D50, and the output device's white balance is set in Viewing Conditions.\n\nWB [RT+CAT02] + [output]: RT's white balance settings are used by CAT02 and the output device's white balance is set in Viewing Conditions.\n\nFree temp+green + CAT02 + [output]: temp and green are selected by the user, the output device's white balance is set in Viewing Conditions.
-!TP_COLORAPP_NEUTRAL;Reset
-!TP_COLORAPP_NEUTRAL_TIP;Reset all sliders checkbox and curves to their default values
-!TP_COLORAPP_RSTPRO;Red & skin-tones protection
-!TP_COLORAPP_RSTPRO_TOOLTIP;Red & skin-tones protection affects both sliders and curves.
-!TP_COLORAPP_SURROUND;Surround
-!TP_COLORAPP_SURROUND_AVER;Average
-!TP_COLORAPP_SURROUND_DARK;Dark
-!TP_COLORAPP_SURROUND_DIM;Dim
-!TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
-!TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\nAverage: Average light environment (standard). The image will not change.\n\nDim: Dim environment (TV). The image will become slighty dark.\n\nDark: Dark environment (projector). The image will become more dark.\n\nExtremly Dark: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
-!TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
-!TP_COLORAPP_TCMODE_CHROMA;Chroma
-!TP_COLORAPP_TCMODE_COLORF;Colorfulness
-!TP_COLORAPP_TCMODE_LABEL1;Curve mode 1
-!TP_COLORAPP_TCMODE_LABEL2;Curve mode 2
-!TP_COLORAPP_TCMODE_LABEL3;Curve chroma mode
-!TP_COLORAPP_TCMODE_LIGHTNESS;Lightness
-!TP_COLORAPP_TCMODE_SATUR;Saturation
-!TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD50 temp=5003\nD55 temp=5503\nD65 temp=6504\nD75 temp=7504
-!TP_COLORAPP_TONECIE;Tone mapping using CIECAM02
-!TP_COLORAPP_TONECIE_TOOLTIP;If this option is disabled, tone mapping is done in L*a*b* space.\nIf this option is enabled, tone mapping is done using CIECAM02.\nThe Tone Mapping tool must be enabled for this setting to take effect.
-!TP_COLORAPP_VIEWING_ABSOLUTELUMINANCE_TOOLTIP;Absolute luminance of the viewing environment\n(usually 16 cd/m²).
-!TP_COLORAPP_WBCAM;WB [RT+CAT02] + [output]
-!TP_COLORAPP_WBRT;WB [RT] + [output]
-!TP_COLORTONING_AB;o C/L
-!TP_COLORTONING_AUTOSAT;Automatic
-!TP_COLORTONING_BALANCE;Balance
-!TP_COLORTONING_BY;o C/L
-!TP_COLORTONING_CHROMAC;Opacity
-!TP_COLORTONING_COLOR;Color
-!TP_COLORTONING_CURVEEDITOR_CL_TOOLTIP;Chroma opacity as a function of luminance oC=f(L)
-!TP_COLORTONING_HIGHLIGHT;Highlights
-!TP_COLORTONING_HUE;Hue
-!TP_COLORTONING_LAB;L*a*b* blending
-!TP_COLORTONING_LABEL;Color Toning
-!TP_COLORTONING_LABGRID;L*a*b* color correction grid
-!TP_COLORTONING_LABGRID_VALUES;HL: a=%1 b=%2\nS: a=%3 b=%4
-!TP_COLORTONING_LABREGIONS;Color correction regions
-!TP_COLORTONING_LABREGION_ABVALUES;a=%1 b=%2
-!TP_COLORTONING_LABREGION_CHANNEL;Channel
-!TP_COLORTONING_LABREGION_CHANNEL_ALL;All
-!TP_COLORTONING_LABREGION_CHANNEL_B;Blue
-!TP_COLORTONING_LABREGION_CHANNEL_G;Green
-!TP_COLORTONING_LABREGION_CHANNEL_R;Red
-!TP_COLORTONING_LABREGION_CHROMATICITYMASK;C
-!TP_COLORTONING_LABREGION_HUEMASK;H
-!TP_COLORTONING_LABREGION_LIGHTNESS;Lightness
-!TP_COLORTONING_LABREGION_LIGHTNESSMASK;L
-!TP_COLORTONING_LABREGION_LIST_TITLE;Correction
-!TP_COLORTONING_LABREGION_MASK;Mask
-!TP_COLORTONING_LABREGION_MASKBLUR;Mask Blur
-!TP_COLORTONING_LABREGION_OFFSET;Offset
-!TP_COLORTONING_LABREGION_POWER;Power
-!TP_COLORTONING_LABREGION_SATURATION;Saturation
-!TP_COLORTONING_LABREGION_SHOWMASK;Show mask
-!TP_COLORTONING_LABREGION_SLOPE;Slope
-!TP_COLORTONING_LUMA;Luminance
-!TP_COLORTONING_LUMAMODE;Preserve luminance
-!TP_COLORTONING_LUMAMODE_TOOLTIP;If enabled, when you change color (red, green, cyan, blue, etc.) the luminance of each pixel is preserved.
-!TP_COLORTONING_METHOD;Method
-!TP_COLORTONING_METHOD_TOOLTIP;"L*a*b* blending", "RGB sliders" and "RGB curves" use interpolated color blending.\n"Color balance (Shadows/Midtones/Highlights)" and "Saturation 2 colors" use direct colors.\n\nThe Black-and-White tool can be enabled when using any color toning method, which allows for color toning.
-!TP_COLORTONING_MIDTONES;Midtones
-!TP_COLORTONING_NEUTRAL;Reset sliders
-!TP_COLORTONING_NEUTRAL_TIP;Reset all values (Shadows, Midtones, Highlights) to default.
-!TP_COLORTONING_OPACITY;Opacity
-!TP_COLORTONING_RGBCURVES;RGB - Curves
-!TP_COLORTONING_RGBSLIDERS;RGB - Sliders
-!TP_COLORTONING_SA;Saturation Protection
-!TP_COLORTONING_SATURATEDOPACITY;Strength
-!TP_COLORTONING_SATURATIONTHRESHOLD;Threshold
-!TP_COLORTONING_SHADOWS;Shadows
-!TP_COLORTONING_SPLITCO;Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITCOCO;Color Balance Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITLR;Saturation 2 colors
-!TP_COLORTONING_STR;Strength
-!TP_COLORTONING_STRENGTH;Strength
-!TP_COLORTONING_TWO2;Special chroma '2 colors'
-!TP_COLORTONING_TWOALL;Special chroma
-!TP_COLORTONING_TWOBY;Special a* and b*
-!TP_COLORTONING_TWOCOLOR_TOOLTIP;Standard chroma:\nLinear response, a* = b*.\n\nSpecial chroma:\nLinear response, a* = b*, but unbound - try under the diagonal.\n\nSpecial a* and b*:\nLinear response unbound with separate curves for a* and b*. Intended for special effects.\n\nSpecial chroma 2 colors:\nMore predictable.
-!TP_COLORTONING_TWOSTD;Standard chroma
-!TP_CROP_GTEPASSPORT;Biometric Passport
-!TP_CROP_GTFRAME;Frame
-!TP_CROP_GTGRID;Grid
-!TP_CROP_GTHARMMEANS;Harmonic Means
-!TP_CROP_GTTRIANGLE1;Golden Triangles 1
-!TP_CROP_GTTRIANGLE2;Golden Triangles 2
-!TP_CROP_PPI;PPI
-!TP_CROP_RESETCROP;Reset
-!TP_CROP_SELECTCROP;Select
-!TP_DARKFRAME_AUTOSELECT;Auto-selection
-!TP_DARKFRAME_LABEL;Dark-Frame
-!TP_DEFRINGE_LABEL;Defringe
-!TP_DEFRINGE_RADIUS;Radius
-!TP_DEFRINGE_THRESHOLD;Threshold
-!TP_DEHAZE_DEPTH;Depth
-!TP_DEHAZE_LABEL;Haze Removal
-!TP_DEHAZE_SHOW_DEPTH_MAP;Show depth map
-!TP_DEHAZE_STRENGTH;Strength
-!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
-!TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
-!TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominance
-!TP_DIRPYRDENOISE_CHROMINANCE_MANUAL;Manual
-!TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Chrominance - Master
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD;Method
-!TP_DIRPYRDENOISE_CHROMINANCE_METHODADVANCED_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nAutomatic multi-zones\nNo preview - works only during saving, but using the "Preview" method by matching the tile size and center to the preview size and center you can get an idea of the expected results.\nThe image is divided into tiles (about 10 to 70 depending on image size) and each tile receives its own chrominance noise reduction settings.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_PMZ;Preview multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW;Preview
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEWRESIDUAL_INFO_TOOLTIP;Displays the remaining noise levels of the part of the image visible in the preview after wavelet.\n\n>300 Very noisy\n100-300 Noisy\n50-100 A little noisy\n<50 Very low noise\n\nBeware, the values will differ between RGB and L*a*b* mode. The RGB values are less accurate because the RGB mode does not completely separate luminance and chrominance.
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_INFO;Preview size=%1, Center: Px=%2 Py=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Preview noise: Mean=%1 High=%2
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= - High= -
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2 Ty=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
-!TP_DIRPYRDENOISE_LABEL;Noise Reduction
-!TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
-!TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
-!TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Detail recovery
-!TP_DIRPYRDENOISE_LUMINANCE_FRAME;Luminance
-!TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminance
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE;Color space
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;For raw images either RGB or L*a*b* methods can be used.\n\nFor non-raw images the L*a*b* method will be used, regardless of the selection.
-!TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
-!TP_DIRPYRDENOISE_MAIN_GAMMA_TOOLTIP;Gamma varies noise reduction strength across the range of tones. Smaller values will target shadows, while larger values will stretch the effect to the brighter tones.
-!TP_DIRPYRDENOISE_MAIN_MODE;Mode
-!TP_DIRPYRDENOISE_MAIN_MODE_AGGRESSIVE;Aggressive
-!TP_DIRPYRDENOISE_MAIN_MODE_CONSERVATIVE;Conservative
-!TP_DIRPYRDENOISE_MAIN_MODE_TOOLTIP;"Conservative" preserves low frequency chroma patterns, while "aggressive" obliterates them.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD;Median method
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_CHROMINANCE;Chroma only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LABEL;Median Filter
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LUMINANCE;Luminance only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_RGB;RGB
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_TOOLTIP;When using the "Luminance only" and "L*a*b*" methods, median filtering will be performed just after the wavelet step in the noise reduction pipeline.\nWhen using the "RGB" mode, it will be performed at the very end of the noise reduction pipeline.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_WEIGHTED;Weighted L* (little) + a*b* (normal)
-!TP_DIRPYRDENOISE_MEDIAN_PASSES;Median iterations
-!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
-!TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
-!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
-!TP_DIRPYRDENOISE_TYPE_3X3;3×3
-!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
-!TP_DIRPYRDENOISE_TYPE_5X5;5×5
-!TP_DIRPYRDENOISE_TYPE_5X5SOFT;5×5 soft
-!TP_DIRPYRDENOISE_TYPE_7X7;7×7
-!TP_DIRPYRDENOISE_TYPE_9X9;9×9
-!TP_DIRPYREQUALIZER_ALGO;Skin Color Range
-!TP_DIRPYREQUALIZER_ALGO_TOOLTIP;Fine: closer to the colors of the skin, minimizing the action on other colors\nLarge: avoid more artifacts.
-!TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts
-!TP_DIRPYREQUALIZER_HUESKIN;Skin hue
-!TP_DIRPYREQUALIZER_HUESKIN_TOOLTIP;This pyramid is for the upper part, so far as the algorithm at its maximum efficiency.\nTo the lower part, the transition zones.\nIf you need to move the area significantly to the left or right - or if there are artifacts: the white balance is incorrect\nYou can slightly reduce the zone to prevent the rest of the image is affected.
-!TP_DIRPYREQUALIZER_LABEL;Contrast by Detail Levels
-!TP_DIRPYREQUALIZER_LUMACOARSEST;Coarsest
-!TP_DIRPYREQUALIZER_LUMACONTRAST_MINUS;Contrast -
-!TP_DIRPYREQUALIZER_LUMACONTRAST_PLUS;Contrast +
-!TP_DIRPYREQUALIZER_LUMAFINEST;Finest
-!TP_DIRPYREQUALIZER_LUMANEUTRAL;Neutral
-!TP_DIRPYREQUALIZER_SKIN;Skin targetting/protection
-!TP_DIRPYREQUALIZER_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_DIRPYREQUALIZER_THRESHOLD;Threshold
-!TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image.
-!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
-!TP_EPD_EDGESTOPPING;Edge stopping
-!TP_EPD_GAMMA;Gamma
-!TP_EPD_LABEL;Tone Mapping
-!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
-!TP_EPD_SCALE;Scale
-!TP_EPD_STRENGTH;Strength
-!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
-!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
-!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
-!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
-!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
-!TP_EXPOSURE_CURVEEDITOR2;Tone curve 2
-!TP_EXPOSURE_CURVEEDITOR2_TOOLTIP;Please refer to the "Exposure > Tone Curves" RawPedia article to learn how to achieve the best results by using two tone curves.
-!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
-!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
-!TP_EXPOSURE_SATURATION;Saturation
-!TP_EXPOSURE_TCMODE_FILMLIKE;Film-like
-!TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1
-!TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2
-!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
-!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual
-!TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending
-!TP_EXPOSURE_TCMODE_STANDARD;Standard
-!TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard
-!TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points
-!TP_EXPOS_WHITEPOINT_LABEL;Raw White Points
-!TP_FILMSIMULATION_LABEL;Film Simulation
-!TP_FILMSIMULATION_SLOWPARSEDIR;RawTherapee is configured to look for Hald CLUT images, which are used for the Film Simulation tool, in a folder which is taking too long to load.\nGo to Preferences > Image Processing > Film Simulation\nto see which folder is being used. You should either point RawTherapee to a folder which contains only Hald CLUT images and nothing more, or to an empty folder if you don't want to use the Film Simulation tool.\n\nRead the Film Simulation article in RawPedia for more information.\n\nDo you want to cancel the scan now?
-!TP_FILMSIMULATION_STRENGTH;Strength
-!TP_FILMSIMULATION_ZEROCLUTSFOUND;Set HaldCLUT directory in Preferences
-!TP_FLATFIELD_AUTOSELECT;Auto-selection
-!TP_FLATFIELD_BLURRADIUS;Blur radius
-!TP_FLATFIELD_BLURTYPE;Blur type
-!TP_FLATFIELD_BT_AREA;Area
-!TP_FLATFIELD_BT_HORIZONTAL;Horizontal
-!TP_FLATFIELD_BT_VERTHORIZ;Vertical + Horizontal
-!TP_FLATFIELD_BT_VERTICAL;Vertical
-!TP_FLATFIELD_CLIPCONTROL;Clip control
-!TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Clip control avoids clipped highlights caused by applying the flat field. If there are already clipped highlights before applying the flat field, clip control can lead to color cast.
-!TP_FLATFIELD_LABEL;Flat-Field
-!TP_GENERAL_11SCALE_TOOLTIP;The effects of this tool are only visible or only accurate at a preview scale of 1:1.
-!TP_GRADIENT_CENTER;Center
-!TP_GRADIENT_CENTER_X;Center X
-!TP_GRADIENT_CENTER_X_TOOLTIP;Shift gradient to the left (negative values) or right (positive values).
-!TP_GRADIENT_CENTER_Y;Center Y
-!TP_GRADIENT_CENTER_Y_TOOLTIP;Shift gradient up (negative values) or down (positive values).
-!TP_GRADIENT_DEGREE;Angle
-!TP_GRADIENT_DEGREE_TOOLTIP;Rotation angle in degrees.
-!TP_GRADIENT_FEATHER;Feather
-!TP_GRADIENT_FEATHER_TOOLTIP;Gradient width in percent of the image diagonal.
-!TP_GRADIENT_LABEL;Graduated Filter
-!TP_GRADIENT_STRENGTH;Strength
-!TP_GRADIENT_STRENGTH_TOOLTIP;Filter strength in stops.
-!TP_HLREC_BLEND;Blend
-!TP_HLREC_ENA_TOOLTIP;Could be activated by Auto Levels.
-!TP_HSVEQUALIZER_CHANNEL;Channel
-!TP_HSVEQUALIZER_HUE;H
-!TP_HSVEQUALIZER_LABEL;HSV Equalizer
-!TP_HSVEQUALIZER_SAT;S
-!TP_HSVEQUALIZER_VAL;V
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Baseline exposure
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET_TOOLTIP;Employ the embedded DCP baseline exposure offset. The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYHUESATMAP;Base table
-!TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYLOOKTABLE;Look table
-!TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-!TP_ICM_BLENDCMSMATRIX;Blend ICC highlights with matrix
-!TP_ICM_BLENDCMSMATRIX_TOOLTIP;Enable to recover clipped highlights when using LUT-based ICC profiles.
-!TP_ICM_BPC;Black Point Compensation
-!TP_ICM_DCPILLUMINANT;Illuminant
-!TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
-!TP_ICM_DCPILLUMINANT_TOOLTIP;Select which embedded DCP illuminant to employ. Default is "interpolated" which is a mix between the two based on white balance. The setting is only available if a dual-illuminant DCP with interpolation support is selected.
-!TP_ICM_INPUTCAMERAICC;Auto-matched camera profile
-!TP_ICM_INPUTCAMERAICC_TOOLTIP;Use RawTherapee's camera-specific DCP or ICC input color profiles. These profiles are more precise than simpler matrix ones. They are not available for all cameras. These profiles are stored in the /iccprofiles/input and /dcpprofiles folders and are automatically retrieved based on a file name matching to the exact model name of the camera.
-!TP_ICM_INPUTCAMERA_TOOLTIP;Use a simple color matrix from dcraw, an enhanced RawTherapee version (whichever is available based on camera model) or one embedded in the DNG.
-!TP_ICM_INPUTCUSTOM_TOOLTIP;Select your own DCP/ICC color profile file for the camera.
-!TP_ICM_INPUTEMBEDDED_TOOLTIP;Use color profile embedded in non-raw files.
-!TP_ICM_INPUTNONE;No profile
-!TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases.
-!TP_ICM_PROFILEINTENT;Rendering Intent
-!TP_ICM_SAVEREFERENCE;Save Reference Image
-!TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance
-!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles.
-!TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile.
-!TP_ICM_TONECURVE;Tone curve
-!TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only available if the selected DCP has a tone curve.
-!TP_ICM_WORKING_TRC;Tone response curve:
-!TP_ICM_WORKING_TRC_CUSTOM;Custom
-!TP_ICM_WORKING_TRC_GAMMA;Gamma
-!TP_ICM_WORKING_TRC_NONE;None
-!TP_ICM_WORKING_TRC_SLOPE;Slope
-!TP_ICM_WORKING_TRC_TOOLTIP;Only for built-in profiles.
-!TP_IMPULSEDENOISE_LABEL;Impulse Noise Reduction
-!TP_IMPULSEDENOISE_THRESH;Threshold
-!TP_LABCURVE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_LABCURVE_AVOIDCOLORSHIFT_TOOLTIP;Fit colors into gamut of the working color space and apply Munsell correction.
-!TP_LABCURVE_BRIGHTNESS;Lightness
-!TP_LABCURVE_CHROMATICITY;Chromaticity
-!TP_LABCURVE_CHROMA_TOOLTIP;To apply B&W toning, set Chromaticity to -100.
-!TP_LABCURVE_CONTRAST;Contrast
-!TP_LABCURVE_CURVEEDITOR;Luminance Curve
-!TP_LABCURVE_CURVEEDITOR_A_RANGE1;Green Saturated
-!TP_LABCURVE_CURVEEDITOR_A_RANGE2;Green Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE3;Red Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE4;Red Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE1;Blue Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE2;Blue Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE3;Yellow Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE4;Yellow Saturated
-!TP_LABCURVE_CURVEEDITOR_CC;CC
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE1;Neutral
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE2;Dull
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE3;Pastel
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE4;Saturated
-!TP_LABCURVE_CURVEEDITOR_CC_TOOLTIP;Chromaticity according to chromaticity C=f(C)
-!TP_LABCURVE_CURVEEDITOR_CH;CH
-!TP_LABCURVE_CURVEEDITOR_CH_TOOLTIP;Chromaticity according to hue C=f(H)
-!TP_LABCURVE_CURVEEDITOR_CL;CL
-!TP_LABCURVE_CURVEEDITOR_CL_TOOLTIP;Chromaticity according to luminance C=f(L)
-!TP_LABCURVE_CURVEEDITOR_HH;HH
-!TP_LABCURVE_CURVEEDITOR_HH_TOOLTIP;Hue according to hue H=f(H)
-!TP_LABCURVE_CURVEEDITOR_LC;LC
-!TP_LABCURVE_CURVEEDITOR_LC_TOOLTIP;Luminance according to chromaticity L=f(C)
-!TP_LABCURVE_CURVEEDITOR_LH;LH
-!TP_LABCURVE_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H)
-!TP_LABCURVE_CURVEEDITOR_LL_TOOLTIP;Luminance according to luminance L=f(L)
-!TP_LABCURVE_LABEL;L*a*b* Adjustments
-!TP_LABCURVE_LCREDSK;Restrict LC to red and skin-tones
-!TP_LABCURVE_LCREDSK_TIP;If enabled, the LC Curve affects only red and skin-tones.\nIf disabled, it applies to all tones.
-!TP_LABCURVE_RSTPROTECTION;Red and skin-tones protection
-!TP_LABCURVE_RSTPRO_TOOLTIP;Works on the Chromaticity slider and the CC curve.
-!TP_LENSGEOM_AUTOCROP;Auto-Crop
-!TP_LENSGEOM_FILL;Auto-fill
-!TP_LENSGEOM_LABEL;Lens / Geometry
-!TP_LENSPROFILE_CORRECTION_AUTOMATCH;Automatically selected
-!TP_LENSPROFILE_CORRECTION_LCPFILE;LCP file
-!TP_LENSPROFILE_CORRECTION_MANUAL;Manually selected
-!TP_LENSPROFILE_LABEL;Profiled Lens Correction
-!TP_LENSPROFILE_LENS_WARNING;Warning: the crop factor used for lens profiling is larger than the crop factor of the camera, the results might be wrong.
-!TP_LENSPROFILE_MODE_HEADER;Lens Profile
-!TP_LENSPROFILE_USE_CA;Chromatic aberration
-!TP_LENSPROFILE_USE_GEOMETRIC;Geometric distortion
-!TP_LENSPROFILE_USE_HEADER;Correct
-!TP_LENSPROFILE_USE_VIGNETTING;Vignetting
-!TP_LOCALCONTRAST_AMOUNT;Amount
-!TP_LOCALCONTRAST_DARKNESS;Darkness level
-!TP_LOCALCONTRAST_LABEL;Local Contrast
-!TP_LOCALCONTRAST_LIGHTNESS;Lightness level
-!TP_LOCALCONTRAST_RADIUS;Radius
-!TP_METADATA_EDIT;Apply modifications
-!TP_METADATA_MODE;Metadata copy mode
-!TP_METADATA_STRIP;Strip all metadata
-!TP_METADATA_TUNNEL;Copy unchanged
-!TP_NEUTRAL;Reset
-!TP_NEUTRAL_TIP;Resets exposure sliders to neutral values.\nApplies to the same controls that Auto Levels applies to, regardless of whether you used Auto Levels or not.
-!TP_PCVIGNETTE_FEATHER;Feather
-!TP_PCVIGNETTE_FEATHER_TOOLTIP;Feathering:\n0 = corners only,\n50 = halfway to center,\n100 = to center.
-!TP_PCVIGNETTE_LABEL;Vignette Filter
-!TP_PCVIGNETTE_ROUNDNESS;Roundness
-!TP_PCVIGNETTE_ROUNDNESS_TOOLTIP;Roundness:\n0 = rectangle,\n50 = fitted ellipse,\n100 = circle.
-!TP_PCVIGNETTE_STRENGTH;Strength
-!TP_PCVIGNETTE_STRENGTH_TOOLTIP;Filter strength in stops (reached in corners).
-!TP_PERSPECTIVE_HORIZONTAL;Horizontal
-!TP_PERSPECTIVE_LABEL;Perspective
-!TP_PERSPECTIVE_VERTICAL;Vertical
-!TP_PFCURVE_CURVEEDITOR_CH;Hue
-!TP_PFCURVE_CURVEEDITOR_CH_TOOLTIP;Controls defringe strength by color.\nHigher = more,\nLower = less.
-!TP_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!TP_PREPROCESS_DEADPIXFILT_TOOLTIP;Tries to suppress dead pixels.
-!TP_PREPROCESS_GREENEQUIL;Green equilibration
-!TP_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!TP_PREPROCESS_HOTPIXFILT_TOOLTIP;Tries to suppress hot pixels.
-!TP_PREPROCESS_LABEL;Preprocessing
-!TP_PREPROCESS_LINEDENOISE;Line noise filter
-!TP_PREPROCESS_LINEDENOISE_DIRECTION;Direction
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_BOTH;Both
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_HORIZONTAL;Horizontal
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_PDAF_LINES;Horizontal only on PDAF rows
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_VERTICAL;Vertical
-!TP_PREPROCESS_NO_FOUND;None found
-!TP_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!TP_PRSHARPENING_LABEL;Post-Resize Sharpening
-!TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions.
-!TP_RAWCACORR_AUTO;Auto-correction
-!TP_RAWCACORR_AUTOIT;Iterations
-!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
-!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CABLUE;Blue
-!TP_RAWCACORR_CARED;Red
-!TP_RAWCACORR_CASTR;Strength
-!TP_RAWEXPOS_BLACKS;Black Levels
-!TP_RAWEXPOS_BLACK_0;Green 1 (lead)
-!TP_RAWEXPOS_BLACK_1;Red
-!TP_RAWEXPOS_BLACK_2;Blue
-!TP_RAWEXPOS_BLACK_3;Green 2
-!TP_RAWEXPOS_BLACK_BLUE;Blue
-!TP_RAWEXPOS_BLACK_GREEN;Green
-!TP_RAWEXPOS_BLACK_RED;Red
-!TP_RAWEXPOS_LINEAR;White-point correction
-!TP_RAWEXPOS_RGB;Red, Green, Blue
-!TP_RAWEXPOS_TWOGREEN;Link greens
-!TP_RAW_1PASSMEDIUM;1-pass (Markesteijn)
-!TP_RAW_2PASS;1-pass+fast
-!TP_RAW_3PASSBEST;3-pass (Markesteijn)
-!TP_RAW_4PASS;3-pass+fast
-!TP_RAW_AHD;AHD
-!TP_RAW_AMAZE;AMaZE
-!TP_RAW_AMAZEVNG4;AMaZE+VNG4
-!TP_RAW_BORDER;Border
-!TP_RAW_DCB;DCB
-!TP_RAW_DCBENHANCE;DCB enhancement
-!TP_RAW_DCBITERATIONS;Number of DCB iterations
-!TP_RAW_DCBVNG4;DCB+VNG4
-!TP_RAW_DMETHOD_PROGRESSBAR;%1 demosaicing...
-!TP_RAW_DMETHOD_PROGRESSBAR_REFINE;Demosaicing refinement...
-!TP_RAW_DMETHOD_TOOLTIP;Note: IGV and LMMSE are dedicated to high ISO images to aid in noise reduction without leading to maze patterns, posterization or a washed-out look.\nPixel Shift is for Pentax/Sony Pixel Shift files. It falls back to AMaZE for non-Pixel Shift files.
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST;Auto threshold
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST_TOOLTIP;If the checkbox is checked (recommended), RawTherapee calculates an optimum value based on flat regions in the image.\nIf there is no flat region in the image or the image is too noisy, the value will be set to 0.\nTo set the value manually, uncheck the checkbox first (reasonable values depend on the image).
-!TP_RAW_DUALDEMOSAICCONTRAST;Contrast threshold
-!TP_RAW_EAHD;EAHD
-!TP_RAW_FAST;Fast
-!TP_RAW_HD;Threshold
-!TP_RAW_HD_TOOLTIP;Lower values make hot/dead pixel detection more aggressive, but false positives may lead to artifacts. If you notice any artifacts appearing when enabling the Hot/Dead Pixel Filters, gradually increase the threshold value until they disappear.
-!TP_RAW_HPHD;HPHD
-!TP_RAW_IGV;IGV
-!TP_RAW_IMAGENUM;Sub-image
-!TP_RAW_IMAGENUM_SN;SN mode
-!TP_RAW_IMAGENUM_TOOLTIP;Some raw files consist of several sub-images (Pentax/Sony Pixel Shift, Pentax 3-in-1 HDR, Canon Dual Pixel, Fuji EXR).\n\nWhen using any demosaicing method other than Pixel Shift, this selects which sub-image is used.\n\nWhen using the Pixel Shift demosaicing method on a Pixel Shift raw, all sub-images are used, and this selects which sub-image should be used for moving parts.
-!TP_RAW_LABEL;Demosaicing
-!TP_RAW_LMMSE;LMMSE
-!TP_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!TP_RAW_LMMSE_TOOLTIP;Adds gamma (step 1), median (steps 2-4) and refinement (steps 5-6) to reduce artifacts and improve the signal-to-noise ratio.
-!TP_RAW_MONO;Mono
-!TP_RAW_NONE;None (Shows sensor pattern)
-!TP_RAW_PIXELSHIFT;Pixel Shift
-!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
-!TP_RAW_PIXELSHIFTDMETHOD;Demosaic method for motion
-!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
-!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
-!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
-!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
-!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
-!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
-!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
-!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
-!TP_RAW_PIXELSHIFTMM_OFF;Off
-!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
-!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
-!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
-!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
-!TP_RAW_PIXELSHIFTSIGMA;Blur radius
-!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
-!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
-!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
-!TP_RAW_RCD;RCD
-!TP_RAW_RCDVNG4;RCD+VNG4
-!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
-!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.\n+fast gives less artifacts in flat areas
-!TP_RAW_SENSOR_XTRANS_LABEL;Sensor with X-Trans Matrix
-!TP_RAW_VNG4;VNG4
-!TP_RAW_XTRANS;X-Trans
-!TP_RAW_XTRANSFAST;Fast X-Trans
-!TP_RESIZE_ALLOW_UPSCALING;Allow Upscaling
-!TP_RESIZE_APPLIESTO;Applies to:
-!TP_RESIZE_CROPPEDAREA;Cropped Area
-!TP_RESIZE_FITBOX;Bounding Box
-!TP_RESIZE_FULLIMAGE;Full Image
-!TP_RESIZE_HEIGHT;Height
-!TP_RESIZE_LANCZOS;Lanczos
-!TP_RESIZE_SPECIFY;Specify:
-!TP_RESIZE_WIDTH;Width
-!TP_RETINEX_CONTEDIT_HSL;HSL histogram
-!TP_RETINEX_CONTEDIT_LAB;L*a*b* histogram
-!TP_RETINEX_CONTEDIT_LH;Hue
-!TP_RETINEX_CONTEDIT_MAP;Equalizer
-!TP_RETINEX_CURVEEDITOR_CD;L=f(L)
-!TP_RETINEX_CURVEEDITOR_CD_TOOLTIP;Luminance according to luminance L=f(L)\nCorrect raw data to reduce halos and artifacts.
-!TP_RETINEX_CURVEEDITOR_LH;Strength=f(H)
-!TP_RETINEX_CURVEEDITOR_LH_TOOLTIP;Strength according to hue Strength=f(H)\nThis curve also acts on chroma when using the "Highlight" retinex method.
-!TP_RETINEX_CURVEEDITOR_MAP;L=f(L)
-!TP_RETINEX_CURVEEDITOR_MAP_TOOLTIP;This curve can be applied alone or with a Gaussian mask or wavelet mask.\nBeware of artifacts!
-!TP_RETINEX_EQUAL;Equalizer
-!TP_RETINEX_FREEGAMMA;Free gamma
-!TP_RETINEX_GAIN;Gain
-!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
-!TP_RETINEX_GAINTRANSMISSION;Gain transmission
-!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
-!TP_RETINEX_GAMMA;Gamma
-!TP_RETINEX_GAMMA_FREE;Free
-!TP_RETINEX_GAMMA_HIGH;High
-!TP_RETINEX_GAMMA_LOW;Low
-!TP_RETINEX_GAMMA_MID;Middle
-!TP_RETINEX_GAMMA_NONE;None
-!TP_RETINEX_GAMMA_TOOLTIP;Restore tones by applying gamma before and after Retinex. Different from Retinex curves or others curves (Lab, Exposure, etc.).
-!TP_RETINEX_GRAD;Transmission gradient
-!TP_RETINEX_GRADS;Strength gradient
-!TP_RETINEX_GRADS_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Strength is reduced when iterations increase, and conversely.
-!TP_RETINEX_GRAD_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Variance and Threshold are reduced when iterations increase, and conversely.
-!TP_RETINEX_HIGH;High
-!TP_RETINEX_HIGHLIG;Highlight
-!TP_RETINEX_HIGHLIGHT;Highlight threshold
-!TP_RETINEX_HIGHLIGHT_TOOLTIP;Increase action of High algorithm.\nMay require you to re-adjust "Neighboring pixels" and to increase the "White-point correction" in the Raw tab -> Raw White Points tool.
-!TP_RETINEX_HSLSPACE_LIN;HSL-Linear
-!TP_RETINEX_HSLSPACE_LOG;HSL-Logarithmic
-!TP_RETINEX_ITER;Iterations (Tone-mapping)
-!TP_RETINEX_ITERF;Tone mapping
-!TP_RETINEX_ITER_TOOLTIP;Simulate a tone-mapping operator.\nHigh values increase the processing time.
-!TP_RETINEX_LABEL;Retinex
-!TP_RETINEX_LABEL_MASK;Mask
-!TP_RETINEX_LABSPACE;L*a*b*
-!TP_RETINEX_LOW;Low
-!TP_RETINEX_MAP;Method
-!TP_RETINEX_MAP_GAUS;Gaussian mask
-!TP_RETINEX_MAP_MAPP;Sharp mask (wavelet partial)
-!TP_RETINEX_MAP_MAPT;Sharp mask (wavelet total)
-!TP_RETINEX_MAP_METHOD_TOOLTIP;Use the mask generated by the Gaussian function above (Radius, Method) to reduce halos and artifacts.\n\nCurve only: apply a diagonal contrast curve on the mask.\nBeware of artifacts!\n\nGaussian mask: generate and use a Gaussian blur of the original mask.\nQuick.\n\nSharp mask: generate and use a wavelet on the original mask.\nSlow.
-!TP_RETINEX_MAP_NONE;None
-!TP_RETINEX_MEDIAN;Transmission median filter
-!TP_RETINEX_METHOD;Method
-!TP_RETINEX_METHOD_TOOLTIP;Low = Reinforce low light.\nUniform = Equalize action.\nHigh = Reinforce high light.\nHighlights = Remove magenta in highlights.
-!TP_RETINEX_MLABEL;Restored haze-free Min=%1 Max=%2
-!TP_RETINEX_MLABEL_TOOLTIP;Should be near min=0 max=32768\nRestored image with no mixture.
-!TP_RETINEX_NEIGHBOR;Radius
-!TP_RETINEX_NEUTRAL;Reset
-!TP_RETINEX_NEUTRAL_TIP;Reset all sliders and curves to their default values.
-!TP_RETINEX_OFFSET;Offset (brightness)
-!TP_RETINEX_SCALES;Gaussian gradient
-!TP_RETINEX_SCALES_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Scale and radius are reduced when iterations increase, and conversely.
-!TP_RETINEX_SETTINGS;Settings
-!TP_RETINEX_SKAL;Scale
-!TP_RETINEX_SLOPE;Free gamma slope
-!TP_RETINEX_STRENGTH;Strength
-!TP_RETINEX_THRESHOLD;Threshold
-!TP_RETINEX_THRESHOLD_TOOLTIP;Limits in/out.\nIn = image source,\nOut = image gauss.
-!TP_RETINEX_TLABEL;TM Min=%1 Max=%2 Mean=%3 Sigma=%4
-!TP_RETINEX_TLABEL2;TM Tm=%1 TM=%2
-!TP_RETINEX_TLABEL_TOOLTIP;Transmission map result.\nMin and Max are used by Variance.\nMean and Sigma.\nTm=Min TM=Max of transmission map.
-!TP_RETINEX_TRANF;Transmission
-!TP_RETINEX_TRANSMISSION;Transmission map
-!TP_RETINEX_TRANSMISSION_TOOLTIP;Transmission according to transmission.\nAbscissa: transmission from negative values (min), mean, and positives values (max).\nOrdinate: amplification or reduction.
-!TP_RETINEX_UNIFORM;Uniform
-!TP_RETINEX_VARIANCE;Contrast
-!TP_RETINEX_VARIANCE_TOOLTIP;Low variance increase local contrast and saturation, but can lead to artifacts.
-!TP_RETINEX_VIEW;Process
-!TP_RETINEX_VIEW_MASK;Mask
-!TP_RETINEX_VIEW_METHOD_TOOLTIP;Standard - Normal display.\nMask - Displays the mask.\nUnsharp mask - Displays the image with a high radius unsharp mask.\nTransmission - Auto/Fixed - Displays the file transmission-map, before any action on contrast and brightness.\n\nAttention: the mask does not correspond to reality, but is amplified to make it more visible.
-!TP_RETINEX_VIEW_NONE;Standard
-!TP_RETINEX_VIEW_TRAN;Transmission - Auto
-!TP_RETINEX_VIEW_TRAN2;Transmission - Fixed
-!TP_RETINEX_VIEW_UNSHARP;Unsharp mask
-!TP_RGBCURVES_BLUE;B
-!TP_RGBCURVES_CHANNEL;Channel
-!TP_RGBCURVES_GREEN;G
-!TP_RGBCURVES_LABEL;RGB Curves
-!TP_RGBCURVES_LUMAMODE;Luminosity mode
-!TP_RGBCURVES_LUMAMODE_TOOLTIP;Luminosity mode allows to vary the contribution of R, G and B channels to the luminosity of the image, without altering image color.
-!TP_RGBCURVES_RED;R
-!TP_SAVEDIALOG_OK_TIP;Shortcut: Ctrl-Enter
-!TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
-!TP_SHARPENEDGE_AMOUNT;Quantity
-!TP_SHARPENEDGE_LABEL;Edges
-!TP_SHARPENEDGE_PASSES;Iterations
-!TP_SHARPENEDGE_THREE;Luminance only
-!TP_SHARPENING_BLUR;Blur radius
-!TP_SHARPENING_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_AMOUNT;Quantity
-!TP_SHARPENMICRO_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_LABEL;Microcontrast
-!TP_SHARPENMICRO_MATRIX;3×3 matrix instead of 5×5
-!TP_SHARPENMICRO_UNIFORMITY;Uniformity
-!TP_SOFTLIGHT_LABEL;Soft Light
-!TP_SOFTLIGHT_STRENGTH;Strength
-!TP_TM_FATTAL_AMOUNT;Amount
-!TP_TM_FATTAL_ANCHOR;Anchor
-!TP_TM_FATTAL_LABEL;Dynamic Range Compression
-!TP_TM_FATTAL_THRESHOLD;Detail
-!TP_VIBRANCE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES;HH
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_LABEL;Skin-tones
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE1;Red/Purple
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE2;Red
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE3;Red/Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE4;Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_TOOLTIP;Hue according to hue H=f(H)
-!TP_VIBRANCE_LABEL;Vibrance
-!TP_VIBRANCE_PASTELS;Pastel Tones
-!TP_VIBRANCE_PASTSATTOG;Link pastel and saturated tones
-!TP_VIBRANCE_PROTECTSKINS;Protect skin-tones
-!TP_VIBRANCE_PSTHRESHOLD;Pastel/saturated tones threshold
-!TP_VIBRANCE_PSTHRESHOLD_SATTHRESH;Saturation threshold
-!TP_VIBRANCE_PSTHRESHOLD_TOOLTIP;The vertical axis represents pastel tones at the bottom and saturated tones at the top.\nThe horizontal axis represents the saturation range.
-!TP_VIBRANCE_PSTHRESHOLD_WEIGTHING;Pastel/saturated transition's weighting
-!TP_VIBRANCE_SATURATED;Saturated Tones
-!TP_VIGNETTING_CENTER;Center
-!TP_VIGNETTING_CENTER_X;Center X
-!TP_VIGNETTING_CENTER_Y;Center Y
-!TP_VIGNETTING_STRENGTH;Strength
-!TP_WAVELET_1;Level 1
-!TP_WAVELET_2;Level 2
-!TP_WAVELET_3;Level 3
-!TP_WAVELET_4;Level 4
-!TP_WAVELET_5;Level 5
-!TP_WAVELET_6;Level 6
-!TP_WAVELET_7;Level 7
-!TP_WAVELET_8;Level 8
-!TP_WAVELET_9;Level 9
-!TP_WAVELET_APPLYTO;Apply To
-!TP_WAVELET_AVOID;Avoid color shift
-!TP_WAVELET_B0;Black
-!TP_WAVELET_B1;Grey
-!TP_WAVELET_B2;Residual
-!TP_WAVELET_BACKGROUND;Background
-!TP_WAVELET_BACUR;Curve
-!TP_WAVELET_BALANCE;Contrast balance d/v-h
-!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified.
-!TP_WAVELET_BALCHRO;Chroma balance
-!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance.
-!TP_WAVELET_BANONE;None
-!TP_WAVELET_BASLI;Slider
-!TP_WAVELET_BATYPE;Contrast balance method
-!TP_WAVELET_CBENAB;Toning and Color Balance
-!TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted
-!TP_WAVELET_CCURVE;Local contrast
-!TP_WAVELET_CH1;Whole chroma range
-!TP_WAVELET_CH2;Saturated/pastel
-!TP_WAVELET_CH3;Link contrast levels
-!TP_WAVELET_CHCU;Curve
-!TP_WAVELET_CHR;Chroma-contrast link strength
-!TP_WAVELET_CHRO;Saturated/pastel threshold
-!TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored.
-!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength"
-!TP_WAVELET_CHSL;Sliders
-!TP_WAVELET_CHTYPE;Chrominance method
-!TP_WAVELET_COLORT;Opacity Red-Green
-!TP_WAVELET_COMPCONT;Contrast
-!TP_WAVELET_COMPGAMMA;Compression gamma
-!TP_WAVELET_COMPGAMMA_TOOLTIP;Adjusting the gamma of the residual image allows you to equilibrate the data and histogram.
-!TP_WAVELET_COMPTM;Tone mapping
-!TP_WAVELET_CONTEDIT;'After' contrast curve
-!TP_WAVELET_CONTR;Gamut
-!TP_WAVELET_CONTRA;Contrast
-!TP_WAVELET_CONTRAST_MINUS;Contrast -
-!TP_WAVELET_CONTRAST_PLUS;Contrast +
-!TP_WAVELET_CONTRA_TOOLTIP;Changes contrast of the residual image.
-!TP_WAVELET_CTYPE;Chrominance control
-!TP_WAVELET_CURVEEDITOR_CC_TOOLTIP;Modifies local contrast as a function of the original local contrast (abscissa).\nLow abscissa values represent small local contrast (real values about 10..20).\n50% abscissa represents average local contrast (real value about 100..300).\n66% abscissa represents standard deviation of local contrast (real value about 300..800).\n100% abscissa represents maximum local contrast (real value about 3000..8000).
-!TP_WAVELET_CURVEEDITOR_CH;Contrast levels=f(Hue)
-!TP_WAVELET_CURVEEDITOR_CH_TOOLTIP;Modifies each level's contrast as a function of hue.\nTake care not to overwrite changes made with the Gamut sub-tool's hue controls.\nThe curve will only have an effect when wavelet contrast level sliders are non-zero.
-!TP_WAVELET_CURVEEDITOR_CL;L
-!TP_WAVELET_CURVEEDITOR_CL_TOOLTIP;Applies a final contrast luminance curve at the end of the wavelet treatment.
-!TP_WAVELET_CURVEEDITOR_HH;HH
-!TP_WAVELET_CURVEEDITOR_HH_TOOLTIP;Modifies the residual image's hue as a function of hue.
-!TP_WAVELET_DALL;All directions
-!TP_WAVELET_DAUB;Edge performance
-!TP_WAVELET_DAUB2;D2 - low
-!TP_WAVELET_DAUB4;D4 - standard
-!TP_WAVELET_DAUB6;D6 - standard plus
-!TP_WAVELET_DAUB10;D10 - medium
-!TP_WAVELET_DAUB14;D14 - high
-!TP_WAVELET_DAUB_TOOLTIP;Changes Daubechies coefficients:\nD4 = Standard,\nD14 = Often best performance, 10% more time-intensive.\n\nAffects edge detection as well as the general quality of the firsts levels. However the quality is not strictly related to this coefficient and can vary with images and uses.
-!TP_WAVELET_DONE;Vertical
-!TP_WAVELET_DTHR;Diagonal
-!TP_WAVELET_DTWO;Horizontal
-!TP_WAVELET_EDCU;Curve
-!TP_WAVELET_EDGCONT;Local contrast
-!TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, top-left, top-right and bottom-right represent respectively local contrast for low values, mean, mean+stdev and maxima.
-!TP_WAVELET_EDGE;Edge Sharpness
-!TP_WAVELET_EDGEAMPLI;Base amplification
-!TP_WAVELET_EDGEDETECT;Gradient sensitivity
-!TP_WAVELET_EDGEDETECTTHR;Threshold low (noise)
-!TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection)
-!TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky.
-!TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise.
-!TP_WAVELET_EDGESENSI;Edge sensitivity
-!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
-!TP_WAVELET_EDGTHRESH;Detail
-!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
-!TP_WAVELET_EDRAD;Radius
-!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
-!TP_WAVELET_EDSL;Threshold Sliders
-!TP_WAVELET_EDTYPE;Local contrast method
-!TP_WAVELET_EDVAL;Strength
-!TP_WAVELET_FINAL;Final Touchup
-!TP_WAVELET_FINEST;Finest
-!TP_WAVELET_HIGHLIGHT;Highlight luminance range
-!TP_WAVELET_HS1;Whole luminance range
-!TP_WAVELET_HS2;Shadows/Highlights
-!TP_WAVELET_HUESKIN;Skin hue
-!TP_WAVELET_HUESKIN_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_HUESKY;Sky hue
-!TP_WAVELET_HUESKY_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_ITER;Delta balance levels
-!TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels.
-!TP_WAVELET_LABEL;Wavelet Levels
-!TP_WAVELET_LARGEST;Coarsest
-!TP_WAVELET_LEVCH;Chroma
-!TP_WAVELET_LEVDIR_ALL;All levels in all directions
-!TP_WAVELET_LEVDIR_INF;Below or equal the level
-!TP_WAVELET_LEVDIR_ONE;One level
-!TP_WAVELET_LEVDIR_SUP;Above the level
-!TP_WAVELET_LEVELS;Wavelet levels
-!TP_WAVELET_LEVELS_TOOLTIP;Choose the number of detail levels the image is to be decomposed into. More levels require more RAM and require a longer processing time.
-!TP_WAVELET_LEVF;Contrast
-!TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1
-!TP_WAVELET_LEVONE;Level 2
-!TP_WAVELET_LEVTHRE;Level 4
-!TP_WAVELET_LEVTWO;Level 3
-!TP_WAVELET_LEVZERO;Level 1
-!TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength
-!TP_WAVELET_LIPST;Enhanced algoritm
-!TP_WAVELET_LOWLIGHT;Shadow luminance range
-!TP_WAVELET_MEDGREINF;First level
-!TP_WAVELET_MEDI;Reduce artifacts in blue sky
-!TP_WAVELET_MEDILEV;Edge detection
-!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine.
-!TP_WAVELET_NEUTRAL;Neutral
-!TP_WAVELET_NOIS;Denoise
-!TP_WAVELET_NOISE;Denoise and Refine
-!TP_WAVELET_NPHIGH;High
-!TP_WAVELET_NPLOW;Low
-!TP_WAVELET_NPNONE;None
-!TP_WAVELET_NPTYPE;Neighboring pixels
-!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced.
-!TP_WAVELET_OPACITY;Opacity Blue-Yellow
-!TP_WAVELET_OPACITYW;Contrast balance d/v-h curve
-!TP_WAVELET_OPACITYWL;Final local contrast
-!TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right.
-!TP_WAVELET_PASTEL;Pastel chroma
-!TP_WAVELET_PROC;Process
-!TP_WAVELET_RE1;Reinforced
-!TP_WAVELET_RE2;Unchanged
-!TP_WAVELET_RE3;Reduced
-!TP_WAVELET_RESCHRO;Chroma
-!TP_WAVELET_RESCON;Shadows
-!TP_WAVELET_RESCONH;Highlights
-!TP_WAVELET_RESID;Residual Image
-!TP_WAVELET_SAT;Saturated chroma
-!TP_WAVELET_SETTINGS;Wavelet Settings
-!TP_WAVELET_SKIN;Skin targetting/protection
-!TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_WAVELET_SKY;Sky targetting/protection
-!TP_WAVELET_SKY_TOOLTIP;At -100 sky-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 sky-tones are protected while all other tones are affected.
-!TP_WAVELET_STREN;Strength
-!TP_WAVELET_STRENGTH;Strength
-!TP_WAVELET_SUPE;Extra
-!TP_WAVELET_THR;Shadows threshold
-!TP_WAVELET_THRESHOLD;Highlight levels
-!TP_WAVELET_THRESHOLD2;Shadow levels
-!TP_WAVELET_THRESHOLD2_TOOLTIP;Only levels between 9 and 9 minus the value will be affected by the shadow luminance range. Other levels will be fully treated. The highest level possible is limited by the highlight level value (9 minus highlight level value).
-!TP_WAVELET_THRESHOLD_TOOLTIP;Only levels beyond the chosen value will be affected by the highlight luminance range. Other levels will be fully treated. The chosen value here limits the highest possible value of the shadow levels.
-!TP_WAVELET_THRH;Highlights threshold
-!TP_WAVELET_TILESBIG;Big tiles
-!TP_WAVELET_TILESFULL;Full image
-!TP_WAVELET_TILESIZE;Tiling method
-!TP_WAVELET_TILESLIT;Little tiles
-!TP_WAVELET_TILES_TOOLTIP;Processing the full image leads to better quality and is the recommended option, while using tiles is a fall-back solution for users with little RAM. Refer to RawPedia for memory requirements.
-!TP_WAVELET_TMSTRENGTH;Compression strength
-!TP_WAVELET_TMSTRENGTH_TOOLTIP;Control the strength of tone mapping or contrast compression of the residual image. When the value is different from 0, the Strength and Gamma sliders of the Tone Mapping tool in the Exposure tab will become grayed out.
-!TP_WAVELET_TMTYPE;Compression method
-!TP_WAVELET_TON;Toning
-!TP_WBALANCE_CLOUDY;Cloudy
-!TP_WBALANCE_DAYLIGHT;Daylight (sunny)
-!TP_WBALANCE_EQBLUERED;Blue/Red equalizer
-!TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behavior of "white balance" by modulating the blue/red balance.\nThis can be useful when shooting conditions:\na) are far from the standard illuminant (e.g. underwater),\nb) are far from conditions where calibrations were performed,\nc) where the matrices or ICC profiles are unsuitable.
-!TP_WBALANCE_FLASH55;Leica
-!TP_WBALANCE_FLASH60;Standard, Canon, Pentax, Olympus
-!TP_WBALANCE_FLASH65;Nikon, Panasonic, Sony, Minolta
-!TP_WBALANCE_FLASH_HEADER;Flash
-!TP_WBALANCE_FLUO1;F1 - Daylight
-!TP_WBALANCE_FLUO2;F2 - Cool White
-!TP_WBALANCE_FLUO3;F3 - White
-!TP_WBALANCE_FLUO4;F4 - Warm White
-!TP_WBALANCE_FLUO5;F5 - Daylight
-!TP_WBALANCE_FLUO6;F6 - Lite White
-!TP_WBALANCE_FLUO7;F7 - D65 Daylight Simulator
-!TP_WBALANCE_FLUO8;F8 - D50 / Sylvania F40 Design
-!TP_WBALANCE_FLUO9;F9 - Cool White Deluxe
-!TP_WBALANCE_FLUO10;F10 - Philips TL85
-!TP_WBALANCE_FLUO11;F11 - Philips TL84
-!TP_WBALANCE_FLUO12;F12 - Philips TL83
-!TP_WBALANCE_FLUO_HEADER;Fluorescent
-!TP_WBALANCE_GTI;GTI
-!TP_WBALANCE_HMI;HMI
-!TP_WBALANCE_JUDGEIII;JudgeIII
-!TP_WBALANCE_LAMP_HEADER;Lamp
-!TP_WBALANCE_LED_CRS;CRS SP12 WWMR16
-!TP_WBALANCE_LED_HEADER;LED
-!TP_WBALANCE_LED_LSI;LSI Lumelex 2040
-!TP_WBALANCE_PICKER;Pick
-!TP_WBALANCE_SHADE;Shade
-!TP_WBALANCE_SOLUX35;Solux 3500K
-!TP_WBALANCE_SOLUX41;Solux 4100K
-!TP_WBALANCE_SOLUX47;Solux 4700K (vendor)
-!TP_WBALANCE_SOLUX47_NG;Solux 4700K (Nat. Gallery)
-!TP_WBALANCE_TEMPBIAS;AWB temperature bias
-!TP_WBALANCE_TEMPBIAS_TOOLTIP;Allows to alter the computation of the "auto white balance"\nby biasing it towards warmer or cooler temperatures. The bias\nis expressed as a percentage of the computed temperature,\nso that the result is given by "computedTemp + computedTemp * bias".
-!TP_WBALANCE_TUNGSTEN;Tungsten
-!TP_WBALANCE_WATER1;UnderWater 1
-!TP_WBALANCE_WATER2;UnderWater 2
-!TP_WBALANCE_WATER_HEADER;UnderWater
-!ZOOMPANEL_100;(100%)
-!ZOOMPANEL_NEWCROPWINDOW;Open (new) detail window
-!ZOOMPANEL_ZOOM100;Zoom to 100%\nShortcut: z
-!ZOOMPANEL_ZOOMFITCROPSCREEN;Fit crop to screen\nShortcut: f
-!ZOOMPANEL_ZOOMFITSCREEN;Fit whole image to screen\nShortcut: Alt-f
-!ZOOMPANEL_ZOOMIN;Zoom In\nShortcut: +
-!ZOOMPANEL_ZOOMOUT;Zoom Out\nShortcut: -
diff --git a/rtdata/languages/Magyar b/rtdata/languages/Magyar
index f66626421..48c9e1a9b 100644
--- a/rtdata/languages/Magyar
+++ b/rtdata/languages/Magyar
@@ -67,14 +67,12 @@ EXPORT_BYPASS_RAW_LINENOISE;[Raw] soronkénti zajszűrés kihagyása
EXPORT_BYPASS_SHARPENEDGE;Élek élesítésének kihagyása
EXPORT_BYPASS_SHARPENING;Élesítés kihagyása
EXPORT_BYPASS_SHARPENMICRO;Mikrokontraszt kihagyása
-EXPORT_BYPASS_SH_HQ;(Kiváló minőségű) árnyékok/csúcsfények kihagyása
EXPORT_FASTEXPORTOPTIONS;Expressz exportálás beállításai
EXPORT_INSTRUCTIONS;Az expressz exportálás lehetővé teszi, hogy az idő- és erőforrás-igényes előhívási lépéseket kihagyd, és helyettük az expressz exportálás beállításait használd a feldolgozási sor lefuttatására. E megoldás kisebb felbontású képek gyors létrehozásához javasolt, ahol a sebesség az elsődleges, vagy ahol átméretezett képekre van szükség egyéb feldolgozási paramétereik módosítása nélkül.
EXPORT_MAXHEIGHT;Maximum magasság:
EXPORT_MAXWIDTH;Maximum szélesség:
EXPORT_PUTTOQUEUEFAST; Feldolgozási sorba helyezés expressz exportáláshoz
EXPORT_RAW_DMETHOD;Interpoláció algoritmusa
-FILEBROWSER_ADDDELTEMPLATE;Sablon hozzáadása/törlése...
FILEBROWSER_APPLYPROFILE;Feldolgozási paraméter hozzárendelése
FILEBROWSER_APPLYPROFILE_PARTIAL;Profil alkalmazása (részleges)
FILEBROWSER_AUTODARKFRAME;Auto referencia feketekép (dark frame)
@@ -515,7 +513,6 @@ PREFERENCES_MENUGROUPLABEL;Címkézés csoportosítása
PREFERENCES_MENUGROUPPROFILEOPERATIONS;Profilműveletek csoportosítása
PREFERENCES_MENUGROUPRANK;Értékelés csoportosítása
PREFERENCES_MENUOPTIONS;Menübeállítások
-PREFERENCES_METADATA;Metaadatok
PREFERENCES_MULTITAB;Több szerkesztőfül
PREFERENCES_MULTITABDUALMON;Több fül mód második kijelzővel (ha elérhető)
PREFERENCES_OUTDIR;Kimeneti alapértelmezett könyvtár
@@ -589,7 +586,6 @@ QINFO_NOEXIF;EXIF adat nem áll rendelkezésre.
SAVEDLG_AUTOSUFFIX;Utótag hozzáadása automatikusan, ha az állomány már létezik
SAVEDLG_FILEFORMAT;Állományformátum
SAVEDLG_JPEGQUAL;JPEG Minőség
-SAVEDLG_PNGCOMPR;PNG Tömörítés
SAVEDLG_PUTTOQUEUE;Feldolgozási sorba helyezés
SAVEDLG_PUTTOQUEUEHEAD;Feldolgozási sorba helyezés az első helyre
SAVEDLG_PUTTOQUEUETAIL;Feldolgozási sorba helyezés az utolsó helyre
@@ -631,7 +627,6 @@ TP_DEFRINGE_RADIUS;Sugár
TP_DEFRINGE_THRESHOLD;Küszöb
TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Színzaj
TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminancia
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_LABEL;Zajcsökkentés
TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
TP_DIRPYREQUALIZER_LABEL;Kontraszt részletek szerint
TP_DIRPYREQUALIZER_LUMACOARSEST;Durva részletek
@@ -669,10 +664,6 @@ TP_FLATFIELD_BT_HORIZONTAL;Vízszintes
TP_FLATFIELD_BT_VERTHORIZ;Függ. + vízsz.
TP_FLATFIELD_BT_VERTICAL;Függőleges
TP_FLATFIELD_LABEL;Flat Field
-TP_GAMMA_CURV;gamma
-TP_GAMMA_FREE;Szabad gamma
-TP_GAMMA_OUTPUT;Kimeneti gamma
-TP_GAMMA_SLOP;meredekség (lineáris)
TP_HLREC_BLEND;Egybemosás
TP_HLREC_CIELAB;CIELab visszaállítás
TP_HLREC_COLOR;Színterjesztés
@@ -684,8 +675,6 @@ TP_HSVEQUALIZER_HUE;Színárnyalat
TP_HSVEQUALIZER_LABEL;HSV Equalizer
TP_HSVEQUALIZER_SAT;Színtelítettség
TP_HSVEQUALIZER_VAL;Színérték
-TP_ICM_BLENDCMSMATRIX;Csúcsfények és mátrix egybemosása
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Kiégett csúcsfények helyrehozásának engedélyezése LUT-alapú ICC profilok használatánál
TP_ICM_INPUTCAMERA;Fényképezőgép alapértelmezése
TP_ICM_INPUTCAMERAICC;Fényképezőgép-specifikus színprofil
TP_ICM_INPUTCAMERAICC_TOOLTIP;A RawTherapee saját, fényképezőgép-specifikus színprofiljainak használata bemeneti profilként. Ez a profil pontosabb az egyszerű mátrixnál, és ha a fényképezőgéphez van elérhető színprofil az iccprofiles/input könyvtárban, akkor azt a RawTherapee a fényképezőgép típus és az állománynév pontos egyezése esetén automatikusan be fogja tölteni.
@@ -755,7 +744,6 @@ TP_ROTATE_SELECTLINE; Vízszintes vonal kijelölése
TP_SHADOWSHLIGHTS_HIGHLIGHTS;Csúcsfények
TP_SHADOWSHLIGHTS_HLTONALW;Csúcsfények tónustartománya
TP_SHADOWSHLIGHTS_LABEL;Árnyékok/Csúcsfények
-TP_SHADOWSHLIGHTS_LOCALCONTR;Lokális kontraszt
TP_SHADOWSHLIGHTS_RADIUS;Sugár
TP_SHADOWSHLIGHTS_SHADOWS;Árnyékok
TP_SHADOWSHLIGHTS_SHTONALW;Árnyékok tónustartománya
@@ -1432,7 +1420,6 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés -
!PREFERENCES_BEHADDALLHINT;Set all parameters to the Add mode.\nAdjustments of parameters in the batch tool panel will be deltas to the stored values.
!PREFERENCES_BEHSETALL;All to 'Set'
!PREFERENCES_BEHSETALLHINT;Set all parameters to the Set mode.\nAdjustments of parameters in the batch tool panel will be absolute, the actual values will be displayed.
-!PREFERENCES_BLACKBODY;Tungsten
!PREFERENCES_CACHECLEAR;Clear
!PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
!PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
@@ -1462,34 +1449,12 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés -
!PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys format
!PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
!PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
-!PREFERENCES_D50;Settings in main menu
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_D55;5500K
-!PREFERENCES_D60;6000K
-!PREFERENCES_D65;6500K
!PREFERENCES_DIRECTORIES;Directories
!PREFERENCES_EDITORCMDLINE;Custom command line
!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_FLUOF2;Fluorescent F2
-!PREFERENCES_FLUOF7;Fluorescent F7
-!PREFERENCES_FLUOF11;Fluorescent F11
!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY;Output device's Yb luminance (%)
-!PREFERENCES_GREY05;Yb=05 CIE L#30
-!PREFERENCES_GREY10;Yb=10 CIE L#40
-!PREFERENCES_GREY15;Yb=15 CIE L#45
-!PREFERENCES_GREY18;Settings in main menu
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREY23;Yb=23 CIE L#55
-!PREFERENCES_GREY30;Yb=30 CIE L#60
-!PREFERENCES_GREY40;Yb=40 CIE L#70
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
!PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
!PREFERENCES_INSPECT_LABEL;Inspect
!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
@@ -1531,9 +1496,7 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés -
!PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
!PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
!PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-!PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
!PROFILEPANEL_GLOBALPROFILES;Bundled profiles
!PROFILEPANEL_MODE_TIP;Processing profile fill mode.\n\nButton pressed: partial profiles will be converted to full profiles; the missing values will be replaced with hard-coded defaults.\n\nButton released: profiles will be applied as they are, altering only those values which they contain.
!PROFILEPANEL_MYPROFILES;My profiles
@@ -1695,8 +1658,6 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés -
!TP_COLORAPP_SURROUND_DIM;Dim
!TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
!TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\nAverage: Average light environment (standard). The image will not change.\n\nDim: Dim environment (TV). The image will become slighty dark.\n\nDark: Dark environment (projector). The image will become more dark.\n\nExtremly Dark: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
!TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
!TP_COLORAPP_TCMODE_CHROMA;Chroma
!TP_COLORAPP_TCMODE_COLORF;Colorfulness
@@ -1781,7 +1742,6 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés -
!TP_DEHAZE_STRENGTH;Strength
!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
!TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
@@ -1798,8 +1758,6 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés -
!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= - High= -
!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2 Ty=%3
!TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
!TP_DIRPYRDENOISE_LABEL;Noise Reduction
!TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
!TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
@@ -1826,7 +1784,6 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés -
!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
!TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
!TP_DIRPYRDENOISE_TYPE_3X3;3×3
!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
!TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1979,7 +1936,6 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés -
!TP_RAWCACORR_AUTOIT;Iterations
!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CASTR;Strength
!TP_RAWEXPOS_BLACK_0;Green 1 (lead)
!TP_RAWEXPOS_BLACK_1;Red
!TP_RAWEXPOS_BLACK_2;Blue
@@ -2030,15 +1986,12 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés -
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
!TP_RAW_PIXELSHIFTMM_OFF;Off
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -2073,7 +2026,6 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés -
!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
!TP_RETINEX_GAINTRANSMISSION;Gain transmission
!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
!TP_RETINEX_GAMMA;Gamma
!TP_RETINEX_GAMMA_FREE;Free
!TP_RETINEX_GAMMA_HIGH;High
@@ -2140,7 +2092,6 @@ ZOOMPANEL_ZOOMOUT;Kicsinyítés -
!TP_RGBCURVES_LUMAMODE;Luminosity mode
!TP_RGBCURVES_LUMAMODE_TOOLTIP;Luminosity mode allows to vary the contribution of R, G and B channels to the luminosity of the image, without altering image color.
!TP_SAVEDIALOG_OK_TIP;Shortcut: Ctrl-Enter
-!TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
!TP_SHARPENING_BLUR;Blur radius
!TP_SHARPENING_CONTRAST;Contrast threshold
!TP_SHARPENMICRO_CONTRAST;Contrast threshold
diff --git a/rtdata/languages/Nederlands b/rtdata/languages/Nederlands
index 0353a5594..c5461ab8f 100644
--- a/rtdata/languages/Nederlands
+++ b/rtdata/languages/Nederlands
@@ -102,7 +102,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;LMMSE Verbetering niet toeppassen [raw]
EXPORT_BYPASS_SHARPENEDGE;Randen verscherpen niet toepassen
EXPORT_BYPASS_SHARPENING;Verscherpen niet toepassen
EXPORT_BYPASS_SHARPENMICRO;Microcontrast niet toepassen
-EXPORT_BYPASS_SH_HQ;Schaduwen/hoge lichten (Hoge kwaliteit) niet toepassen
EXPORT_FASTEXPORTOPTIONS;Opties Snelle Export
EXPORT_INSTRUCTIONS;Snel Exporteren biedt de mogelijkheid om gereedschappen uit te schakelen die veel tijd en rekenkracht vergen tijdens het converteren. Deze methode wordt aanbevolen om snel foto's in lagere resoluties aan te maken of wanneer de grootte moet worden aangepast voor één of meerdere afbeeldingen zonder de reeds opgeslagen ontwikkelinstellingen te wijzigen.
EXPORT_MAXHEIGHT;Max. hoogte:
@@ -115,7 +114,6 @@ EXPORT_USE_FAST_PIPELINE_TIP;Gebruikt een speciale verwerkingslijn waarbij kwali
EXPORT_USE_NORMAL_PIPELINE;Standaard (wijzigt formaat aan het eind)
EXTPROGTARGET_1;raw
EXTPROGTARGET_2;verwerkingsrij
-FILEBROWSER_ADDDELTEMPLATE;Voeg sjablonen toe of verwijder...
FILEBROWSER_APPLYPROFILE;Pas profiel toe
FILEBROWSER_APPLYPROFILE_PARTIAL;Pas profiel toe (gedeeltelijk)
FILEBROWSER_AUTODARKFRAME;Automatisch donkerframe
@@ -242,7 +240,6 @@ GENERAL_WARNING;Waarschuwing
HISTOGRAM_TOOLTIP_B;Toon/verberg blauw histogram
HISTOGRAM_TOOLTIP_BAR;Toon/verberg RGB-indicatie\nRechtermuisklik op foto om te starten/stoppen
HISTOGRAM_TOOLTIP_CHRO;Toon/Verberg Chromaticiteit histogram
-HISTOGRAM_TOOLTIP_FULL;Wissel tussen volledig of aangepast histogram
HISTOGRAM_TOOLTIP_G;Toon/verberg groen histogram
HISTOGRAM_TOOLTIP_L;Toon/verberg CIELAB-luminantiehistogram
HISTOGRAM_TOOLTIP_R;Toon/verberg rood histogram
@@ -795,8 +792,6 @@ MAIN_TAB_RAW;RAW
MAIN_TAB_RAW_TOOLTIP;Sneltoets: Alt-r
MAIN_TAB_TRANSFORM;Transformeer
MAIN_TAB_TRANSFORM_TOOLTIP;Sneltoets: Alt-t
-MAIN_TAB_WAVELET;Wavelet
-MAIN_TAB_WAVELET_TOOLTIP;Sneltoets: Alt-w
MAIN_TOOLTIP_BACKCOLOR0;Achtergrond kleur van het voorbeeld: Thema-based\nSneltoets: 8
MAIN_TOOLTIP_BACKCOLOR1;Achtergrond kleur van het voorbeeld: Zwart\nSneltoets: 9
MAIN_TOOLTIP_BACKCOLOR2;Achtergrond kleur van het voorbeeld: Wit\nSneltoets: 0
@@ -896,7 +891,6 @@ PARTIALPASTE_SHARPENING;Verscherping
PARTIALPASTE_SHARPENMICRO;Microcontrast
PARTIALPASTE_VIBRANCE;Levendigheid
PARTIALPASTE_VIGNETTING;Vignetteringscorrectie
-PARTIALPASTE_WAVELETGROUP;Wavelet verwerking
PARTIALPASTE_WHITEBALANCE;Witbalans
PREFERENCES_ADD;Toevoegen
PREFERENCES_APPEARANCE_NAVGUIDECOLOR;Navigator randkleur
@@ -908,7 +902,6 @@ PREFERENCES_BEHADDALLHINT;Zet alle parameters in de Toevoegen mode.\nWijz
PREFERENCES_BEHAVIOR;Gedrag
PREFERENCES_BEHSETALL;Alles op 'Activeer'
PREFERENCES_BEHSETALLHINT;Zet alle parameters in de Activeer mode.\nWijzigingen van parameters in de batch tool zijn absoluut. De actuele waarden worden gebruikt.
-PREFERENCES_BLACKBODY;Tungsten(wolfraam)
PREFERENCES_CACHEMAXENTRIES;Maximaal aantal elementen in cache
PREFERENCES_CACHEOPTS;Cache-opties
PREFERENCES_CACHETHUMBHEIGHT;Maximale hoogte miniaturen
@@ -928,10 +921,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys formaat
PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Naam
PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
PREFERENCES_CUSTPROFBUILDPATH;Pad naar programma of script
-PREFERENCES_D50;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
PREFERENCES_DARKFRAMEFOUND;Gevonden
PREFERENCES_DARKFRAMESHOTS;foto's
PREFERENCES_DARKFRAMETEMPLATES;sjablonen
@@ -951,31 +940,15 @@ PREFERENCES_FLATFIELDFOUND;Gevonden
PREFERENCES_FLATFIELDSDIR;Vlakveldmap
PREFERENCES_FLATFIELDSHOTS;foto's
PREFERENCES_FLATFIELDTEMPLATES;sjablonen
-PREFERENCES_FLUOF2;Fluorescent F2
-PREFERENCES_FLUOF7;Fluorescent F7
-PREFERENCES_FLUOF11;Fluorescent F11
PREFERENCES_FORIMAGE;Voor niet-RAW-bestanden
PREFERENCES_FORRAW;Voor RAW-bestanden
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Zelfde hoogte miniaturen in Bewerkingsvenster en Bestandsnavigator
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Verschillende hoogtes voor miniaturen vereist meer verwerkingstijd wanneer je wisselt tussen Bewerkingsvenster en Bestandsnavigator
PREFERENCES_GIMPPATH;Installatiemap GIMP
-PREFERENCES_GREY;Uitvoerapparaat's Yb luminantie (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;Omgeving Yb luminantie (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;Automatisch
PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram in linkerpaneel
-PREFERENCES_HISTOGRAMWORKING;Gebruik het werkprofiel voor het Hoofdhistogram en de Navigator
PREFERENCES_HISTOGRAM_TOOLTIP;Het werkprofiel wordt gebruikt voor het Hoofdhistogram en de Navigator. In alle andere gevallen wordt het gamma-gecorrigeerde uitvoerprofiel gebruikt.
PREFERENCES_HLTHRESHOLD;Grenswaarde overbelichting
PREFERENCES_ICCDIR;Map met ICC-profielen
-PREFERENCES_IMG_RELOAD_NEEDED;Deze wijzigingen vereisen dat de afbeelding wordt herladen (of dat een nieuwe afbeelding wordt geopend).
PREFERENCES_IMPROCPARAMS;Standaardprofiel
PREFERENCES_INSPECT_LABEL;Inspecteren
PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum aantal afbeeldingen in cache
@@ -993,7 +966,6 @@ PREFERENCES_MENUGROUPLABEL;Groepeer labelen
PREFERENCES_MENUGROUPPROFILEOPERATIONS;Groepeer profielbewerkingen
PREFERENCES_MENUGROUPRANK;Groepeer markering
PREFERENCES_MENUOPTIONS;Menu-opties
-PREFERENCES_METADATA;Metadata
PREFERENCES_MONINTENT;Standaard monitor weergave
PREFERENCES_MONITOR;Monitor
PREFERENCES_MONPROFILE;Standaard kleurprofiel
@@ -1059,9 +1031,7 @@ PREFERENCES_TAB_IMPROC;Beeldverwerking
PREFERENCES_TAB_SOUND;Geluiden
PREFERENCES_TP_LABEL;Gereedschapspaneel:
PREFERENCES_TP_VSCROLLBAR;Verberg de schuifbalk van het gereedschapspaneel
-PREFERENCES_TUNNELMETADATA;Kopieer Exif/IPTC/XMP-data onveranderd naar uitvoerbestand
PREFERENCES_USEBUNDLEDPROFILES;Gebruik gebundelde profielen
-PREFERENCES_VIEW;Witbalans instelling van het uitvoerapparaat (monitor, TV, projector...)
PREFERENCES_WORKFLOW;Layout
PROFILEPANEL_COPYPPASTE;Te kopiëren parameters
PROFILEPANEL_GLOBALPROFILES;Gebundelde profielen
@@ -1098,12 +1068,10 @@ PROGRESSBAR_SNAPSHOT_ADDED;Snapshot toegevoegd
PROGRESSDLG_PROFILECHANGEDINBROWSER;Profiel veranderd in bestandsnavigator
QINFO_ISO;ISO
QINFO_NOEXIF;Exif-gegevens niet beschikbaar.
-REFERENCES_AUTLISSTD;Hoog
SAVEDLG_AUTOSUFFIX;Voeg automatisch ophogend nummer (-1, -2..) toe als bestand al bestaat
SAVEDLG_FILEFORMAT;Bestandstype
SAVEDLG_FORCEFORMATOPTS;Forceer opties voor opslaan
SAVEDLG_JPEGQUAL;JPEG-kwaliteit
-SAVEDLG_PNGCOMPR;PNG-compressie
SAVEDLG_PUTTOQUEUE;Plaats in verwerkingsrij
SAVEDLG_PUTTOQUEUEHEAD;Plaats vooraan in verwerkingsrij
SAVEDLG_PUTTOQUEUETAIL;Plaats achteraan in verwerkingsrij
@@ -1250,8 +1218,6 @@ TP_COLORAPP_SURROUND_DARK;Donker
TP_COLORAPP_SURROUND_DIM;Gedimd
TP_COLORAPP_SURROUND_EXDARK;Duister
TP_COLORAPP_SURROUND_TOOLTIP;Verander tonen en kleuren rekening houdend met de weergaveomstandigheden van het uitvoerapparaat\n\nGemiddeld:\nGemiddeld verlichte omgeving (standaard)\nDe afbeelding zal niet veranderen \n\nGedimd:\nGedimde omgeving (TV)\nDe afbeelding zal enigszins donkerder worden\n\nDonker:\nDonkere omgeving (projector)\nDe afbeelding zal veel donkerder worden\n\nDuister:\nDuistere omgeving\nDe afbeelding zal zeer donker worden
-TP_COLORAPP_SURSOURCE;Donkere omgeving
-TP_COLORAPP_SURSOURCE_TOOLTIP;Kan worden gebruikt als de foto is gemaakt in een donkere omgeving
TP_COLORAPP_TCMODE_BRIGHTNESS;Helderheid
TP_COLORAPP_TCMODE_CHROMA;Chroma
TP_COLORAPP_TCMODE_COLORF;Kleurrijkheid
@@ -1324,7 +1290,6 @@ TP_DEFRINGE_RADIUS;Straal
TP_DEFRINGE_THRESHOLD;Drempel
TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zone
TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatisch algemeen
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Probeert chroma ruis te bepalen\nWees voorzichtig, deze berekening is een gemiddelde en kan subjectief zijn!
TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominantie Blauw & Geel
TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominantie curve
TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominantie
@@ -1341,8 +1306,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Voorbeeld ruis: Gemiddeld=%1 Hoo
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Voorbeeld ruis: Gemiddeld= - Hoog= -
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tegel grootte=%1, Centrum: Tx=%2 Ty=%3
TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominantie Rood & Groen
-TP_DIRPYRDENOISE_ENH;Verbeteren
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Verbetert de ruisonderdrukking, maar vergroot de verwerkingstijd met ongeveer 20%
TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Type gereedschap
TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminantie curve
TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Luminantie Detail
@@ -1350,7 +1313,6 @@ TP_DIRPYRDENOISE_LUMINANCE_FRAME;Luminantie
TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminantie
TP_DIRPYRDENOISE_MAIN_COLORSPACE;Methode
TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;L*a*b*
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_LABEL;Ruisonderdrukking
TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;Voor raw afbeeldingen kan RGB of Lab methode worden gebruikt.\n\nVoor niet-raw afbeeldingen zal altijd de Lab methode worden gebruikt, ongeacht de geselecteerde methode.
TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
@@ -1371,8 +1333,6 @@ TP_DIRPYRDENOISE_MEDIAN_PASSES;Mediaan herhalingen
TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Het gebruik van drie mediaan filter herhalingen met een 3×3 venster grootte geeft meestal een beter resultaat dan het gebruik van één mediaan filter herhaling met eeen 7×7 venster grootte.
TP_DIRPYRDENOISE_MEDIAN_TYPE;Type
TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Gebruik een mediaan filter van gewenste venster grootte. Hoe groter het venster hoe langer het duurt.\n\n3×3 zacht: behandeld 5 pixels in een 3×3 pixel venster.\n3×3: behandeld 9 pixels in een 3×3 pixel venster.\n5×5 zacht: behandeld 13 pixels in een 5×5 pixel venster.\n5×5: behandeld 25 pixels in een 5×5 pixel venster.\n7×7: behandeld 49 pixels in een 7×7 pixel venster.\n9×9: behandeld 81 pixels in a 9×9 pixel venster.\n\nSoms is het mogelijk om een betere kwaliteit te krijgen door het uitvoeren van meerdere herhalingen met een kleiner venster dan één uitvoering met een groter venster.
-TP_DIRPYRDENOISE_PASSE;Herhalingen
-TP_DIRPYRDENOISE_SLI;Schuifbalk
TP_DIRPYRDENOISE_TYPE_3X3;3×3
TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 zacht
TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1444,10 +1404,6 @@ TP_FLATFIELD_BT_VERTICAL;Verticaal
TP_FLATFIELD_CLIPCONTROL;Clip controle
TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Clip controle vermijd geclipte hoge lichten veroorzaakt door het toepassen van vlakveld. Als er al geclipte hoge lichten waren voor het toepassen van vlakveld dan kan clip controle kleurzweem veroorzaken.
TP_FLATFIELD_LABEL;Vlakveld
-TP_GAMMA_CURV;Gamma
-TP_GAMMA_FREE;Vrij gamma
-TP_GAMMA_OUTPUT;Uitvoer gamma
-TP_GAMMA_SLOP;Helling (lineair)
TP_GENERAL_11SCALE_TOOLTIP;De werking is alleen zichtbaar op schaal 1:1 van het voorbeeld
TP_GRADIENT_CENTER;Centrum
TP_GRADIENT_CENTER_X;Centrum X
@@ -1479,8 +1435,6 @@ TP_ICM_APPLYHUESATMAP;DCP basis tabel
TP_ICM_APPLYHUESATMAP_TOOLTIP;Gebruik de ingebedde DCP basis tabel (HueSatMap). De instelling is allen actief als de DCP een basis tabel heeft.
TP_ICM_APPLYLOOKTABLE;DCP 'look' tabel
TP_ICM_APPLYLOOKTABLE_TOOLTIP;Gebruik de ingebedde DCP 'look' tabel. De instelling is allen actief als de DCP een looktable heeft.
-TP_ICM_BLENDCMSMATRIX;Meng hoge lichten met matrix
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Activeer om uitgebeten hoge lichten te herstellen wanneer op LUT gebaseerde ICC-profielen worden gebruikt.
TP_ICM_BPC;Zwartpunt Compensatie
TP_ICM_DCPILLUMINANT;Illuminant
TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpoleren
@@ -1578,7 +1532,6 @@ TP_PRSHARPENING_TOOLTIP;Verscherp na verkleinen. Werkt alleen als verkleinen act
TP_RAWCACORR_AUTO;Automatische CA-correctie
TP_RAWCACORR_CABLUE;Blauw
TP_RAWCACORR_CARED;Rood
-TP_RAWCACORR_CASTR;Sterkte
TP_RAWEXPOS_BLACKS;Zwartniveaus
TP_RAWEXPOS_BLACK_0;Groen 1 (leidend)
TP_RAWEXPOS_BLACK_1;Rood
@@ -1616,36 +1569,20 @@ TP_RAW_LMMSE_TOOLTIP;Toevoegen gamma (stap 1), mediaan (stappen 2-4), en verfijn
TP_RAW_MONO;Mono
TP_RAW_NONE;Geen (Toont sensor patroon)
TP_RAW_PIXELSHIFT;Pixel Verschuiven
-TP_RAW_PIXELSHIFTADAPTIVE;Adaptieve detectie
TP_RAW_PIXELSHIFTBLUR;Vervaag bewegingsmasker
TP_RAW_PIXELSHIFTEQUALBRIGHT;Balanseer de helderheid van de frames
TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Balanseer de helderheid van de frames t.o.v. de helderheid van het geslecteerde frame.\nAls er overbelichte gebieden zijn in de frames, selecteer dan het helderste frame om een magenta kleurzweem te vermijden of selecteer bewegingsorrectie.
-TP_RAW_PIXELSHIFTEXP0;Experimenteel
TP_RAW_PIXELSHIFTGREEN;Controleer groene kanaal voor beweging
TP_RAW_PIXELSHIFTHOLEFILL;Vul holtes in verschuivingsmasker
TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Vul holtes in het verschuivingsmasker op
-TP_RAW_PIXELSHIFTLMMSE;Gebruik lmmse voor verschoven gebieden
-TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Gebruik lmmse ipv amaze voor verschoven gebieden.\nNuttig voor hoge ISO afbeeeldingen.
-TP_RAW_PIXELSHIFTMASKTHRESHOLD;3x3 nieuwe drempel
TP_RAW_PIXELSHIFTMEDIAN;Mediaan
-TP_RAW_PIXELSHIFTMEDIAN3;Sluit geselecteerde frame uit voor mediaan
-TP_RAW_PIXELSHIFTMEDIAN3_TOOLTIP;Sluit geselecteerde frame uit voor mediaan.\nNuttig als bewegende objecten een overlap hebben in frame 2 en 3
TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Gebruik mediaan voor alle frames inplaats van alleen het geselecteerd frame voor gebieden met beweging.\nVerwijder objecten die voorkomen op verschillende plekken in alle frames.\nGeeft bewegingseffect voor langzaam bewegende (overlappende) objecten.
TP_RAW_PIXELSHIFTMM_AUTO;Automatisch
TP_RAW_PIXELSHIFTMM_CUSTOM;Eigen
TP_RAW_PIXELSHIFTMM_OFF;Uit
TP_RAW_PIXELSHIFTMOTION;Beweging detectie niveau (vervallen)
-TP_RAW_PIXELSHIFTMOTIONCORRECTION;Groen bewegingscorrectie grootte
TP_RAW_PIXELSHIFTMOTIONMETHOD;Beweging Correctie
-TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0: geen bewegingsdetectie\n1 - 99: beweging wordt bepaald op basis van deze waarde. Vergroot de waarde om de bewegingsdetectie te verhogen\n100: Amaze demozaïek wordt gebruikt
-TP_RAW_PIXELSHIFTNONGREENAMAZE;Controleer rood/blauw amaze
TP_RAW_PIXELSHIFTNONGREENCROSS;Controleer rood/blauw kanaal voor beweging
-TP_RAW_PIXELSHIFTNONGREENCROSS2;Controleer groen amaze
-TP_RAW_PIXELSHIFTNONGREENHORIZONTAL;Controleer rood/blauw horizontaal
-TP_RAW_PIXELSHIFTNONGREENVERTICAL;Controleer rood/blauw vertikaal
-TP_RAW_PIXELSHIFTNREADISO;nLezen
-TP_RAW_PIXELSHIFTPRNU;PRNU (%)
-TP_RAW_PIXELSHIFTREDBLUEWEIGHT;Rood&Blauw gewicht
TP_RAW_PIXELSHIFTSHOWMOTION;Toon beweging
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Toon alleen masker
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Toont het bewegingsmasker zonder de afbeelding
@@ -1653,9 +1590,6 @@ TP_RAW_PIXELSHIFTSIGMA;Vervagen straal
TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;De standaard straal van 1.0 is goed voor normale ISO. Verhoog de waarde voor hogere ISO.\n5.0 is een goed startpunt voor hoge ISO afbeeldingen.\nControleer het bewegingsmasker bij het veranderen van de waarde.
TP_RAW_PIXELSHIFTSMOOTH;Zachte overgang
TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Zachte overgang tussen gebieden met en zonder beweging.\nKies 0 om Zachte overgang uit te zetten\nKies 1 voor Amaze/lmmse of Mediaan
-TP_RAW_PIXELSHIFTSTDDEVFACTORBLUE;StdDev factor Blauw
-TP_RAW_PIXELSHIFTSTDDEVFACTORGREEN;StdDev factor Groen
-TP_RAW_PIXELSHIFTSTDDEVFACTORRED;StdDev factor Rood
TP_RAW_SENSOR_BAYER_LABEL;Sensor met Bayer matrix
TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass geeft het beste resultaat (aanbevolen voor lage ISO afbeeldingen)\n1-pass geeft hetzelfde resultaat als 3-pass voor hoge ISO afbeeldingen en is sneller.
TP_RAW_SENSOR_XTRANS_LABEL;Sensor met X-Trans matrix
@@ -1686,7 +1620,6 @@ TP_RETINEX_CURVEEDITOR_MAP_TOOLTIP;Deze curve kan zowel alleen worden gebruikt o
TP_RETINEX_EQUAL;Mixer
TP_RETINEX_FREEGAMMA;Vrij gamma
TP_RETINEX_GAIN;Verbeteren
-TP_RETINEX_GAIN_TOOLTIP;Wijzigt de aangepaste afbeelding.\n\nDit wijkt af van de andere instellingen. Wordt gebruikt voor zwarte of witte pixels, en om het histogram te balanceren.
TP_RETINEX_GAMMA;Gamma
TP_RETINEX_GAMMA_FREE;Vrij
TP_RETINEX_GAMMA_HIGH;Hoog
@@ -1763,10 +1696,8 @@ TP_SAVEDIALOG_OK_TIP;Sneltoets: Ctrl-Enter
TP_SHADOWSHLIGHTS_HIGHLIGHTS;Hoge lichten
TP_SHADOWSHLIGHTS_HLTONALW;Toonomvang
TP_SHADOWSHLIGHTS_LABEL;Schaduwen/hoge lichten
-TP_SHADOWSHLIGHTS_LOCALCONTR;Lokaal contrast
TP_SHADOWSHLIGHTS_RADIUS;Straal
TP_SHADOWSHLIGHTS_SHADOWS;Schaduwen
-TP_SHADOWSHLIGHTS_SHARPMASK;Verscherpingsmasker
TP_SHADOWSHLIGHTS_SHTONALW;Toonomvang
TP_SHARPENEDGE_AMOUNT;Hoeveelheid
TP_SHARPENEDGE_LABEL;Randen
@@ -2221,11 +2152,9 @@ ZOOMPANEL_ZOOMOUT;Zoom uit\nSneltoets: -
!PREFERENCES_CROP_GUIDES_FRAME;Frame
!PREFERENCES_CROP_GUIDES_FULL;Original
!PREFERENCES_CROP_GUIDES_NONE;None
-!PREFERENCES_D50_OLD;5000K
!PREFERENCES_DIRECTORIES;Directories
!PREFERENCES_EDITORCMDLINE;Custom command line
!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
!PREFERENCES_LANG;Language
!PREFERENCES_PERFORMANCE_MEASURE;Measure
!PREFERENCES_PERFORMANCE_MEASURE_HINT;Logs processing times in console
diff --git a/rtdata/languages/Norsk BM b/rtdata/languages/Norsk BM
deleted file mode 100644
index 1e375314c..000000000
--- a/rtdata/languages/Norsk BM
+++ /dev/null
@@ -1,2328 +0,0 @@
-#01 2009-02-12 Esben L. Kristensen
-
-CURVEEDITOR_LINEAR;Linjær
-CURVEEDITOR_LOADDLGLABEL;Åpne kurve...
-CURVEEDITOR_SAVEDLGLABEL;Lagre kurve...
-CURVEEDITOR_TOOLTIPLINEAR;Nullstil kurve til linjær
-CURVEEDITOR_TOOLTIPLOAD;Lagre kurve fra fil
-CURVEEDITOR_TOOLTIPSAVE;Lagre nåværende kurve
-DIRBROWSER_FOLDERS;Mapper
-EXIFFILTER_APERTURE;Blender
-EXIFFILTER_CAMERA;Kamera
-EXIFFILTER_FOCALLEN;Fokallengde
-EXIFFILTER_ISO;ISO
-EXIFFILTER_LENS;Objektiv
-EXIFFILTER_SHUTTER;Lukker
-EXIFPANEL_ADDEDIT;Tilføy/Rediger
-EXIFPANEL_ADDEDITHINT;Tilføy ny tag eller rediger tag
-EXIFPANEL_ADDTAGDLG_ENTERVALUE;Skriv verdi
-EXIFPANEL_ADDTAGDLG_SELECTTAG;Velg tag
-EXIFPANEL_ADDTAGDLG_TITLE;Tilføy/Rediger Tag
-EXIFPANEL_KEEP;Behold
-EXIFPANEL_KEEPHINT;Behold de utvalgte tags når det skrives output fil
-EXIFPANEL_REMOVE;Fjern
-EXIFPANEL_REMOVEHINT;Fjern de utvalgte tags når det skrives output fil
-EXIFPANEL_RESET;Nullstil
-EXIFPANEL_RESETALL;Nullstil alle
-EXIFPANEL_RESETALLHINT;Nullstil alle tags til de opprinnelige verdier
-EXIFPANEL_RESETHINT;Nullstil de utvalgte tags til de opprinnelige verdier
-EXIFPANEL_SUBDIRECTORY;Undermappe
-FILEBROWSER_APPLYPROFILE;Legg til profil
-FILEBROWSER_CLEARPROFILE;Slett profil
-FILEBROWSER_COPYPROFILE;Kopier profil
-FILEBROWSER_DELETEDLGLABEL;Bekreft slett fil
-FILEBROWSER_DELETEDLGMSG;Vil du slette valgte %1 filer?
-FILEBROWSER_EMPTYTRASH;Tøm søpla
-FILEBROWSER_EMPTYTRASHHINT;Tøm søpla permanent
-FILEBROWSER_PARTIALPASTEPROFILE;Delvis lim inn
-FILEBROWSER_PASTEPROFILE;Lim inn profil
-FILEBROWSER_POPUPCANCELJOB;Avbryt jobben
-FILEBROWSER_POPUPMOVEEND;Flytt til enden av køen
-FILEBROWSER_POPUPMOVEHEAD;Flytt til begynnelsen av køen
-FILEBROWSER_POPUPOPEN;Åpne
-FILEBROWSER_POPUPOPENINEDITOR;Åpne i Editor
-FILEBROWSER_POPUPPROCESS;Legg til i prosesseringskøen
-FILEBROWSER_POPUPREMOVE;Fjern fra filsystem
-FILEBROWSER_POPUPRENAME;Skift navn
-FILEBROWSER_POPUPSELECTALL;Velg alt
-FILEBROWSER_POPUPTRASH;Flytt til søpla
-FILEBROWSER_POPUPUNRANK;Fjern rangering
-FILEBROWSER_POPUPUNTRASH;Fjern fra søpla
-FILEBROWSER_RENAMEDLGLABEL;Bytt filnavn
-FILEBROWSER_SHOWDIRHINT;Vis alle bildene i folderen
-FILEBROWSER_SHOWRANK1HINT;Vis bilder rangert med 1 stjerne
-FILEBROWSER_SHOWRANK2HINT;Vis bilder rangert med 2 stjerne
-FILEBROWSER_SHOWRANK3HINT;Vis bilder rangert med 3 stjerne
-FILEBROWSER_SHOWRANK4HINT;Vis bilder rangert med 4 stjerne
-FILEBROWSER_SHOWRANK5HINT;Vis bilder rangert med 5 stjerne
-FILEBROWSER_SHOWTRASHHINT;Vis innholdet i søpla
-FILEBROWSER_SHOWUNRANKHINT;Vis unrangerte bilder
-FILEBROWSER_THUMBSIZE;Thumbnail størrelse
-FILEBROWSER_ZOOMINHINT;Øk thumbnail størrelse
-FILEBROWSER_ZOOMOUTHINT;Reduser thumbnail størrelse
-GENERAL_ABOUT;Om
-GENERAL_CANCEL;Annuller
-GENERAL_DISABLE;Deaktiver
-GENERAL_DISABLED;Deaktivert
-GENERAL_ENABLE;Aktiver
-GENERAL_ENABLED;Aktivert
-GENERAL_LANDSCAPE;Landskap
-GENERAL_NA;n/a
-GENERAL_NO;Nei
-GENERAL_OK;Ok
-GENERAL_PORTRAIT;Portrett
-GENERAL_SAVE;Lagre
-HISTOGRAM_TOOLTIP_B;Vis/skjul blått histogram
-HISTOGRAM_TOOLTIP_G;Vis/skjul grønt histogram
-HISTOGRAM_TOOLTIP_L;Vis/skjul CIELAB Luminans histogram
-HISTOGRAM_TOOLTIP_R;Vis/skjul rødt histogram
-HISTORY_CHANGED;Forandret
-HISTORY_CUSTOMCURVE;Egen kurve
-HISTORY_FROMCLIPBOARD;Fra utklippstavlen
-HISTORY_LABEL;Historikk
-HISTORY_MSG_1;Foto åpnet
-HISTORY_MSG_2;Profil åpnet
-HISTORY_MSG_3;Profil endret
-HISTORY_MSG_4;Historikk-gjennomsyn
-HISTORY_MSG_5;Lysstyrke
-HISTORY_MSG_6;Kontrast
-HISTORY_MSG_7;Sort
-HISTORY_MSG_8;Eksponerings-komprimering
-HISTORY_MSG_9;Høylys-komprimering
-HISTORY_MSG_10;Skyggekomprimering
-HISTORY_MSG_11;Tonekurve
-HISTORY_MSG_12;Autoeksponering
-HISTORY_MSG_13;Eksponeringsmarkering
-HISTORY_MSG_14;Luminanslysstyrke
-HISTORY_MSG_15;Luminanskontrast
-HISTORY_MSG_16;Sort luminans
-HISTORY_MSG_17;Luminans høylys kompr.
-HISTORY_MSG_18;Luminans skygge kompr.
-HISTORY_MSG_19;Luminanskurve
-HISTORY_MSG_20;Skarphet
-HISTORY_MSG_21;Skarphetsradius
-HISTORY_MSG_22;Skarphetsmengde
-HISTORY_MSG_23;Skarphetsterskelverdi
-HISTORY_MSG_24;Skarphet kun i kanter
-HISTORY_MSG_25;Kanttegningsradie-skarphet
-HISTORY_MSG_26;Kantskarphetstoleranse
-HISTORY_MSG_27;Halo-skarphetsskontroll
-HISTORY_MSG_28;Halo-kontrollstørrelse
-HISTORY_MSG_29;Skarphetsmetode
-HISTORY_MSG_30;Deconvolution-radius
-HISTORY_MSG_31;Deconvolution-størrelse
-HISTORY_MSG_32;Deconvolution-dempning
-HISTORY_MSG_33;Deconvolution-gjentakelse
-HISTORY_MSG_34;Unngå fargemarkeringer
-HISTORY_MSG_35;Metthetsbegrensning
-HISTORY_MSG_36;Methetsgrense
-HISTORY_MSG_37;Fargeforsterkning
-HISTORY_MSG_38;Hvitbalansemetode
-HISTORY_MSG_39;Fargetemperatur
-HISTORY_MSG_40;Hvitbalansenyanse
-HISTORY_MSG_41;Fargeskift "A"
-HISTORY_MSG_42;Fargeskift "B"
-HISTORY_MSG_43;Luminans støyreduksjon
-HISTORY_MSG_44;Lum. støyreduksjon-radius
-HISTORY_MSG_45;Lum. støyreduksjon kanttoleranse
-HISTORY_MSG_46;Fargestøyreduksjon
-HISTORY_MSG_47;Fargestøyreduksjon-radius
-HISTORY_MSG_48;Fargestøjreduktion-kanttoleranse
-HISTORY_MSG_49;Kantfølsom fargestøyreduksjon
-HISTORY_MSG_50;Skygge/høylys verktøy
-HISTORY_MSG_51;Høylys-forsterkning
-HISTORY_MSG_52;Skyggeforsterkning
-HISTORY_MSG_53;Høylys-tonvidde
-HISTORY_MSG_54;Skygge-tonevidde
-HISTORY_MSG_55;Lokal kontrast
-HISTORY_MSG_56;Skygge/høylys -radius
-HISTORY_MSG_57;Enkel rotasjon
-HISTORY_MSG_58;Vend horisontalt
-HISTORY_MSG_59;Vend vertikalt
-HISTORY_MSG_60;Rotasjon
-HISTORY_MSG_61;Rotasjon
-HISTORY_MSG_62;Objektivforvrengning-korrigering
-HISTORY_MSG_63;Valgt bokmerke
-HISTORY_MSG_64;Beskjær foto
-HISTORY_MSG_65;C/A korrigering
-HISTORY_MSG_66;Høylys-forbedring
-HISTORY_MSG_67;Høylys-forbedringsstyrke
-HISTORY_MSG_68;Høylys-forbedringsmetode
-HISTORY_MSG_69;Arbeidsfargerom
-HISTORY_MSG_70;Utgangssfargerom
-HISTORY_MSG_71;Inngangsfargerom
-HISTORY_MSG_72;Vignettering-korrigering
-HISTORY_MSG_73;Kanalmikser
-HISTORY_MSG_74;Endre størrelsesskala
-HISTORY_MSG_75;Endre størrelses metode
-HISTORY_MSG_76;Exif Metadata
-HISTORY_MSG_77;IPTC Metadata
-HISTORY_MSG_78;Data specified for resize
-HISTORY_MSG_79;Resize width
-HISTORY_MSG_80;Resize height
-HISTORY_MSG_81;Resize enabled
-HISTORY_NEWSNAPSHOT;Nytt b.m
-HISTORY_SNAPSHOT;Bokmerke
-HISTORY_SNAPSHOTS;Bokmerker
-IPTCPANEL_CATEGORY;Kategori
-IPTCPANEL_CITY;By
-IPTCPANEL_COPYHINT;Kopier IPTC innstillinger til utklippstavlen
-IPTCPANEL_COUNTRY;Land
-IPTCPANEL_CREDIT;Kreditering
-IPTCPANEL_CREDITHINT;Identifisere oppretteren av bildet, ikke nødvendivis den samme som eieren (Credit).
-IPTCPANEL_DATECREATED;Opptakelsesdato
-IPTCPANEL_EMBEDDED;Intern IPTC data
-IPTCPANEL_EMBEDDEDHINT;Nullstil til de IPTC data som finnes internt i bildefilen
-IPTCPANEL_HEADLINE;Overskrift
-IPTCPANEL_INSTRUCTIONS;Instruksjoner
-IPTCPANEL_KEYWORDS;Nøkkelord
-IPTCPANEL_PASTEHINT;Innsett IPTC innstillinger fra utklipstavlen
-IPTCPANEL_RESET;Nullstil
-IPTCPANEL_RESETHINT;Nullstil til standard profil
-IPTCPANEL_SOURCE;Kilde
-IPTCPANEL_TITLE;Bildetittel
-MAIN_BUTTON_PREFERENCES;Innstillinger
-MAIN_BUTTON_SAVE;Lagre bilde
-MAIN_BUTTON_SENDTOEDITOR;Send til editor
-MAIN_FRAME_BATCHQUEUE;Batch Queue
-MAIN_FRAME_FILEBROWSER;File Browser
-MAIN_FRAME_PLACES;Places
-MAIN_FRAME_PLACES_ADD;Add
-MAIN_FRAME_RECENT;Recent Folders
-MAIN_MSG_ALREADYEXISTS;Filen eksisterer allerede.
-MAIN_MSG_CANNOTLOAD;Kan ikke åpne bildet
-MAIN_MSG_CANNOTSAVE;Kan ikke lagre
-MAIN_MSG_CANNOTSTARTEDITOR;Kan ikke starte editor.
-MAIN_MSG_CANNOTSTARTEDITOR_SECONDARY;Vennligst sett korrekt bane i "Innstillinger" dialogen.
-MAIN_MSG_QOVERWRITE;Vil du overskrive?
-MAIN_TAB_COLOR;Farge
-MAIN_TAB_DETAIL;Detailj
-MAIN_TAB_DEVELOP;Develop
-MAIN_TAB_EXIF;Exif
-MAIN_TAB_EXPOSURE;Eksponering
-MAIN_TAB_FILTER;Filter
-MAIN_TAB_IPTC;IPTC
-MAIN_TAB_METADATA;Metadata
-MAIN_TAB_TRANSFORM;Endre
-MAIN_TOOLTIP_HIDEHP;Vis/skjul venstre panel (Inneholder historikken shortcut key: H)
-MAIN_TOOLTIP_INDCLIPPEDH;Marker høylys-indikering
-MAIN_TOOLTIP_INDCLIPPEDS;Marker skygge-indikering
-MAIN_TOOLTIP_QINFO;Hurtig informasjon om bildet
-PARTIALPASTE_BASICGROUP;Basisinnstillinger
-PARTIALPASTE_CACORRECTION;C/A korreksjon
-PARTIALPASTE_COARSETRANS;90° rotasjon/flipping
-PARTIALPASTE_COLORGROUP;Fargerelaterte innstillinger
-PARTIALPASTE_COMPOSITIONGROUP;Komposisjonsinnstillinger
-PARTIALPASTE_CROP;Utsnitt
-PARTIALPASTE_DIALOGLABEL;Delvis innliming av prosesseringsprofil
-PARTIALPASTE_DISTORTION;Forvrengningskorreksjon
-PARTIALPASTE_EXIFCHANGES;Forandringer i exif data
-PARTIALPASTE_EXPOSURE;Exponering
-PARTIALPASTE_ICMSETTINGS;ICM settings
-PARTIALPASTE_IPTCINFO;IPTC info
-PARTIALPASTE_LENSGROUP;Objektivrelaterte innstillinger
-PARTIALPASTE_METAGROUP;Metadata
-PARTIALPASTE_RESIZE;Forandre størrelse
-PARTIALPASTE_ROTATION;Rotasjon
-PARTIALPASTE_SHADOWSHIGHLIGHTS;Skygger/Høylys
-PARTIALPASTE_SHARPENING;Oppskarping
-PARTIALPASTE_VIGNETTING;Vignetteringskorreksjon
-PARTIALPASTE_WHITEBALANCE;Hvitbalanse
-PREFERENCES_APPLNEXTSTARTUP;Endres ved neste oppstart
-PREFERENCES_CACHEMAXENTRIES;Maksimalt antall cache oppføringer
-PREFERENCES_CACHEOPTS;Cache innstillinger
-PREFERENCES_CACHETHUMBHEIGHT;Maksimal Thumbnail Høyde
-PREFERENCES_CLIPPINGIND;Markerings-indikasjon
-PREFERENCES_DATEFORMAT;Datoformat
-PREFERENCES_DATEFORMATHINT;Du kan bruke følgende formattering:\n%y : år\n%m : måned\n%d : dag\n\nF. eks. er ungarsk datoformat:\n%y/%m/%d
-PREFERENCES_DIRHOME;Hjemmemappe
-PREFERENCES_DIRLAST;Sidste besøkte mappe
-PREFERENCES_DIROTHER;Annen
-PREFERENCES_DIRSELECTDLG;Velg bildemappe ved oppstart...
-PREFERENCES_DIRSOFTWARE;Installasjons-mappe
-PREFERENCES_EXTERNALEDITOR;Ekstern editor
-PREFERENCES_FBROWSEROPTS;Filfremviser-innstillinger
-PREFERENCES_FILEFORMAT;Filformat
-PREFERENCES_FORIMAGE;For bildefiler
-PREFERENCES_FORRAW;For RAW-filer
-PREFERENCES_GIMPPATH;GIMP installasjonsmappe
-PREFERENCES_HLTHRESHOLD;Terskelverdi for markerte høylys
-PREFERENCES_ICCDIR;Mappe til ICC-profiler
-PREFERENCES_IMPROCPARAMS;Standard-bildebehandlingsparametre
-PREFERENCES_INTENT_ABSOLUTE;Total kolorimetri
-PREFERENCES_INTENT_PERCEPTUAL;Oppfattet kolorimetri
-PREFERENCES_INTENT_RELATIVE;Relativ kolorimetri
-PREFERENCES_INTENT_SATURATION;Metning
-PREFERENCES_OUTDIR;Utmappe
-PREFERENCES_OUTDIRFOLDER;Lagre til folder
-PREFERENCES_OUTDIRFOLDERHINT;Send lagrede bilder til valgt folder
-PREFERENCES_OUTDIRTEMPLATE;Bruk mal
-PREFERENCES_OUTDIRTEMPLATEHINT;Du kan bruke følgende formattering:\n%f, %d1, %d2, ..., %p1, %p2, ...\n\nFormateringsstrengene refererer til folderne og understier av stien til RAW-filen.\n\nF. eks., hvis /home/tom/image/02-09-2006/dsc0012.nefhar vært åpnet, vil det bety at formateringsstrengen er:\n%f=dsc0012, %d1=02-09-2006, %d2=image, ...\n%p1=/home/tom/image/02-09-2006, %p2=/home/tom/image, p3=/home/tom, ...\n\nvis du vil lagre det prosesserte bildet der originalen er, skriv:\n%p1/%f\n\nHvis du vil lagre det prosesserte bildet i folderen 'converted' under inni originalfolderen, skriv:\n%p1/converted/%f\n\nHvis du vil lagre det prosesserte bildet i '/home/tom/converted' men beholde underfolderens datomerking, skriv:\n%p2/converted/%d1/%f
-PREFERENCES_PARSEDEXT;Analyserte utvidelser
-PREFERENCES_PARSEDEXTADD;Legg til utvidelse
-PREFERENCES_PARSEDEXTADDHINT;Skriv inn en utvidelse og trykk på kanppen for å legge til listen
-PREFERENCES_PARSEDEXTDELHINT;Fjern valgte utvidelse fra listen
-PREFERENCES_PROFILEHANDLING;Prosesserer filbehandling
-PREFERENCES_PROFILELOADPR;Profillastingsprioritet
-PREFERENCES_PROFILEPRCACHE;Profil i Cache
-PREFERENCES_PROFILEPRFILE;Profil i innfilen
-PREFERENCES_PROFILESAVECACHE;Lagre prosesseringsparametre til cachen
-PREFERENCES_PROFILESAVEINPUT;Lagre prosesseringsparametre i innfilen
-PREFERENCES_PSPATH;Adobe Photoshop installasjonsfolder
-PREFERENCES_SELECTLANG;Velg språk
-PREFERENCES_SHOWBASICEXIF;Vis utvidet Exif-informasjon
-PREFERENCES_SHOWDATETIME;Vis dato og tid
-PREFERENCES_SHTHRESHOLD;Terskelverdi for markerte skygger
-PREFERENCES_STARTUPIMDIR;Bildemappe som vises ved oppstart
-PREFERENCES_TAB_BROWSER;Filfremviser
-PREFERENCES_TAB_COLORMGR;Fargehåndtering
-PREFERENCES_TAB_GENERAL;Generelt
-PREFERENCES_TAB_IMPROC;Bildebehandling
-PROFILEPANEL_LABEL;Bildebehandlingsprofiler
-PROFILEPANEL_LOADDLGLABEL;Åpne bildebehandlingsparametre...
-PROFILEPANEL_PCUSTOM;Egen
-PROFILEPANEL_PFILE;Fra fil
-PROFILEPANEL_PLASTSAVED;Seneste lagret
-PROFILEPANEL_SAVEDLGLABEL;Lagre bildebehandlingsparametre...
-PROFILEPANEL_TOOLTIPCOPY;Kopier gjeldende profil til utklippstavlen
-PROFILEPANEL_TOOLTIPLOAD;Åpne profil fra fil
-PROFILEPANEL_TOOLTIPPASTE; Lim inn profil fra utklippstavlen
-PROFILEPANEL_TOOLTIPSAVE;Lagre nåværende profil
-PROGRESSBAR_LOADING;Åpner bilde...
-PROGRESSBAR_LOADJPEG;Åpner JPEG-fil...
-PROGRESSBAR_LOADPNG;Åpner PNG-fil...
-PROGRESSBAR_LOADTIFF;Åpner TIFF-fil...
-PROGRESSBAR_PROCESSING;Bearbeider Bilde...
-PROGRESSBAR_READY;Klar
-PROGRESSBAR_SAVEJPEG;Lagre JPEG-fil...
-PROGRESSBAR_SAVEPNG;Lagre PNG-fil...
-PROGRESSBAR_SAVETIFF;Lagre TIFF-fil...
-QINFO_ISO;ISO
-QINFO_NOEXIF;Exifdata utilgjengelig.
-SAVEDLG_FILEFORMAT;Filformat
-SAVEDLG_JPEGQUAL;JPEG-kvalitet
-SAVEDLG_PNGCOMPR;PNG-komprimering
-SAVEDLG_PUTTOQUEUE;Sett i prosesseringskø
-SAVEDLG_PUTTOQUEUEHEAD;Sett øverst i prosesseringskøen
-SAVEDLG_PUTTOQUEUETAIL;Sett nederst i prosesseringskøen
-SAVEDLG_SAVEIMMEDIATELY;Lagre med en gang
-SAVEDLG_SAVESPP;Lagre bildebehandlingsparametre med bildene
-TOOLBAR_TOOLTIP_CROP;Velg beskjæringsområde (shortcut key: C)
-TOOLBAR_TOOLTIP_HAND;Håndverktøy (shortcut key: N)
-TOOLBAR_TOOLTIP_STRAIGHTEN;Rett opp (shortcut key: S)
-TOOLBAR_TOOLTIP_WB;Punkt-hvitbalanse (shortcut key: W)
-TP_CACORRECTION_BLUE;Blå
-TP_CACORRECTION_LABEL;C/A justering
-TP_CACORRECTION_RED;Rød
-TP_CHMIXER_BLUE;Blå
-TP_CHMIXER_GREEN;Grønn
-TP_CHMIXER_LABEL;Kanalmikser
-TP_CHMIXER_RED;Rød
-TP_COARSETRAF_TOOLTIP_HFLIP;Vend horisontalt
-TP_COARSETRAF_TOOLTIP_ROTLEFT;Roter mot venstre
-TP_COARSETRAF_TOOLTIP_ROTRIGHT;Roter mot høyre
-TP_COARSETRAF_TOOLTIP_VFLIP;Vend vertikalt
-TP_CROP_FIXRATIO;Fast proporsjon
-TP_CROP_GTDIAGONALS;Diagonalreglen
-TP_CROP_GTNONE;Ingen
-TP_CROP_GTRULETHIRDS;Tredjedelsreglen
-TP_CROP_GUIDETYPE;Guidetype:
-TP_CROP_H;H
-TP_CROP_LABEL;Beskjæring
-TP_CROP_W;B
-TP_CROP_X;x
-TP_CROP_Y;y
-TP_DISTORTION_AMOUNT;Mengde
-TP_DISTORTION_LABEL;Forvrengning
-TP_EXPOSURE_AUTOLEVELS;Auto nivå
-TP_EXPOSURE_BLACKLEVEL;Sort
-TP_EXPOSURE_BRIGHTNESS;Lysstyrke
-TP_EXPOSURE_CLIP;Klipp
-TP_EXPOSURE_COMPRHIGHLIGHTS;Høylyskomprimering
-TP_EXPOSURE_COMPRSHADOWS;Skyggekomprimering
-TP_EXPOSURE_CONTRAST;Kontrast
-TP_EXPOSURE_CURVEEDITOR;Tonekurve
-TP_EXPOSURE_EXPCOMP;Eks. Komp.
-TP_EXPOSURE_LABEL;Eksponering
-TP_HLREC_CIELAB;CIELab Blending
-TP_HLREC_COLOR;Fargespedning
-TP_HLREC_LABEL;Høylys-forbedring
-TP_HLREC_LUMINANCE;Forbedring av luminans
-TP_HLREC_METHOD;Metode:
-TP_ICM_INPUTCAMERA;Kameravalg
-TP_ICM_INPUTCUSTOM;Egen
-TP_ICM_INPUTDLGLABEL;Velg indgangs ICC-profil...
-TP_ICM_INPUTEMBEDDED;Anvend intern, hvis mulig
-TP_ICM_INPUTPROFILE;Inngangprofil
-TP_ICM_LABEL;ICM
-TP_ICM_NOICM;Ingen ICM: sRGB-profil
-TP_ICM_OUTPUTPROFILE;Utgangsprofil
-TP_ICM_WORKINGPROFILE;Arbeidsprofil
-TP_RAW_DMETHOD;Metode
-TP_RAW_FALSECOLOR;Falsk fargefortrengningsverdi
-TP_RESIZE_H;H:
-TP_RESIZE_LABEL;Endre størrelse
-TP_RESIZE_METHOD;Metode:
-TP_RESIZE_NEAREST;Nærmeste
-TP_RESIZE_SCALE;Skala
-TP_RESIZE_W;B:
-TP_ROTATE_DEGREE;Antall grader
-TP_ROTATE_LABEL;Rett opp
-TP_ROTATE_SELECTLINE;Velg rett linje
-TP_SHADOWSHLIGHTS_HIGHLIGHTS;Høylys
-TP_SHADOWSHLIGHTS_HLTONALW;Toneomfang
-TP_SHADOWSHLIGHTS_LABEL;Skygger/høylys
-TP_SHADOWSHLIGHTS_LOCALCONTR;Lokal kontrast
-TP_SHADOWSHLIGHTS_RADIUS;Radius
-TP_SHADOWSHLIGHTS_SHADOWS;Skygger
-TP_SHADOWSHLIGHTS_SHTONALW;Toneomfang
-TP_SHARPENING_AMOUNT;Mengde
-TP_SHARPENING_EDRADIUS;Radius
-TP_SHARPENING_EDTOLERANCE;Kanttoleranse
-TP_SHARPENING_HALOCONTROL;Halo-kontroll
-TP_SHARPENING_HCAMOUNT;Mengde
-TP_SHARPENING_LABEL;Skarphet
-TP_SHARPENING_METHOD;Metode
-TP_SHARPENING_ONLYEDGES;Skarphet kun i kanter
-TP_SHARPENING_RADIUS;Radius
-TP_SHARPENING_RLD;RL Dekonvolusjon
-TP_SHARPENING_RLD_AMOUNT;Mengde
-TP_SHARPENING_RLD_DAMPING;Demping
-TP_SHARPENING_RLD_ITERATIONS;Gjentakelse
-TP_SHARPENING_THRESHOLD;Terskelverdi
-TP_SHARPENING_USM;Uskarp maske
-TP_VIGNETTING_AMOUNT;Mengde
-TP_VIGNETTING_LABEL;Vignetterings-korrigering
-TP_VIGNETTING_RADIUS;Radius
-TP_WBALANCE_AUTO;Auto
-TP_WBALANCE_CAMERA;Kamera
-TP_WBALANCE_CUSTOM;Egen
-TP_WBALANCE_GREEN;Nyanse
-TP_WBALANCE_LABEL;Hvitbalanse
-TP_WBALANCE_METHOD;Metode
-TP_WBALANCE_SIZE;Størrelse:
-TP_WBALANCE_SPOTWB;Punkt HB
-TP_WBALANCE_TEMPERATURE;Temperatur
-
-!!!!!!!!!!!!!!!!!!!!!!!!!
-! Untranslated keys follow; remove the ! prefix after an entry is translated.
-!!!!!!!!!!!!!!!!!!!!!!!!!
-
-!ABOUT_TAB_BUILD;Version
-!ABOUT_TAB_CREDITS;Credits
-!ABOUT_TAB_LICENSE;License
-!ABOUT_TAB_RELEASENOTES;Release Notes
-!ABOUT_TAB_SPLASH;Splash
-!ADJUSTER_RESET_TO_DEFAULT;Click - reset to default value.\nCtrl+click - reset to initial value.
-!BATCHQUEUE_AUTOSTART;Auto-start
-!BATCHQUEUE_AUTOSTARTHINT;Start processing automatically when a new job arrives.
-!BATCHQUEUE_DESTFILENAME;Path and file name
-!BATCHQUEUE_STARTSTOPHINT;Start or stop processing the images in the queue.\n\nShortcut: Ctrl+s
-!BATCH_PROCESSING;Batch Processing
-!CURVEEDITOR_AXIS_IN;I:
-!CURVEEDITOR_AXIS_LEFT_TAN;LT:
-!CURVEEDITOR_AXIS_OUT;O:
-!CURVEEDITOR_AXIS_RIGHT_TAN;RT:
-!CURVEEDITOR_CATMULLROM;Flexible
-!CURVEEDITOR_CURVE;Curve
-!CURVEEDITOR_CURVES;Curves
-!CURVEEDITOR_CUSTOM;Standard
-!CURVEEDITOR_DARKS;Darks
-!CURVEEDITOR_EDITPOINT_HINT;Enable edition of node in/out values.\n\nRight-click on a node to select it.\nRight-click on empty space to de-select the node.
-!CURVEEDITOR_HIGHLIGHTS;Highlights
-!CURVEEDITOR_LIGHTS;Lights
-!CURVEEDITOR_MINMAXCPOINTS;Equalizer
-!CURVEEDITOR_NURBS;Control cage
-!CURVEEDITOR_PARAMETRIC;Parametric
-!CURVEEDITOR_SHADOWS;Shadows
-!CURVEEDITOR_TOOLTIPCOPY;Copy current curve to clipboard.
-!CURVEEDITOR_TOOLTIPPASTE;Paste curve from clipboard.
-!CURVEEDITOR_TYPE;Type:
-!DONT_SHOW_AGAIN;Don't show this message again.
-!DYNPROFILEEDITOR_DELETE;Delete
-!DYNPROFILEEDITOR_EDIT;Edit
-!DYNPROFILEEDITOR_EDIT_RULE;Edit Dynamic Profile Rule
-!DYNPROFILEEDITOR_ENTRY_TOOLTIP;The matching is case insensitive.\nUse the "re:" prefix to enter\na regular expression.
-!DYNPROFILEEDITOR_IMGTYPE_ANY;Any
-!DYNPROFILEEDITOR_IMGTYPE_HDR;HDR
-!DYNPROFILEEDITOR_IMGTYPE_PS;Pixel Shift
-!DYNPROFILEEDITOR_IMGTYPE_STD;Standard
-!DYNPROFILEEDITOR_MOVE_DOWN;Move Down
-!DYNPROFILEEDITOR_MOVE_UP;Move Up
-!DYNPROFILEEDITOR_NEW;New
-!DYNPROFILEEDITOR_NEW_RULE;New Dynamic Profile Rule
-!DYNPROFILEEDITOR_PROFILE;Processing Profile
-!EDITWINDOW_TITLE;Image Edit
-!EDIT_OBJECT_TOOLTIP;Displays a widget on the preview window which lets you adjust this tool.
-!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
-!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
-!EXIFFILTER_FILETYPE;File type
-!EXIFFILTER_IMAGETYPE;Image type
-!EXIFFILTER_METADATAFILTER;Enable metadata filters
-!EXIFPANEL_SHOWALL;Show all
-!EXPORT_BYPASS;Processing steps to bypass
-!EXPORT_BYPASS_ALL;Select / Unselect All
-!EXPORT_BYPASS_DEFRINGE;Bypass Defringe
-!EXPORT_BYPASS_DIRPYRDENOISE;Bypass Noise Reduction
-!EXPORT_BYPASS_DIRPYREQUALIZER;Bypass Contrast by Detail Levels
-!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
-!EXPORT_BYPASS_RAW_CA;Bypass [raw] Chromatic Aberration Correction
-!EXPORT_BYPASS_RAW_CCSTEPS;Bypass [raw] False Color Suppression
-!EXPORT_BYPASS_RAW_DCB_ENHANCE;Bypass [raw] DCB Enhancement Steps
-!EXPORT_BYPASS_RAW_DCB_ITERATIONS;Bypass [raw] DCB Iterations
-!EXPORT_BYPASS_RAW_DF;Bypass [raw] Dark-Frame
-!EXPORT_BYPASS_RAW_FF;Bypass [raw] Flat-Field
-!EXPORT_BYPASS_RAW_GREENTHRESH;Bypass [raw] Green Equilibration
-!EXPORT_BYPASS_RAW_LINENOISE;Bypass [raw] Line Noise Filter
-!EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Bypass [raw] LMMSE Enhancement Steps
-!EXPORT_BYPASS_SHARPENEDGE;Bypass Edge Sharpening
-!EXPORT_BYPASS_SHARPENING;Bypass Sharpening
-!EXPORT_BYPASS_SHARPENMICRO;Bypass Microcontrast
-!EXPORT_BYPASS_SH_HQ;Bypass Sharp Mask Shadows/Highlights
-!EXPORT_FASTEXPORTOPTIONS;Fast Export Options
-!EXPORT_INSTRUCTIONS;Fast Export options provide overrides to bypass time and resource consuming development settings and to run queue processing using the fast export settings instead. This method is recommended for quicker generation of lower resolution images when speed is a priority or when resized output is desired for one or many images without making modifications to their saved development parameters.
-!EXPORT_MAXHEIGHT;Maximum height:
-!EXPORT_MAXWIDTH;Maximum width:
-!EXPORT_PIPELINE;Processing pipeline
-!EXPORT_PUTTOQUEUEFAST; Put to queue for fast export
-!EXPORT_RAW_DMETHOD;Demosaic method
-!EXPORT_USE_FAST_PIPELINE;Dedicated (full processing on resized image)
-!EXPORT_USE_FAST_PIPELINE_TIP;Use a dedicated processing pipeline for images in Fast Export mode, that trades speed for quality. Resizing of the image is done as early as possible, instead of doing it at the end like in the normal pipeline. The speedup can be significant, but be prepared to see artifacts and a general degradation of output quality.
-!EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
-!EXTPROGTARGET_1;raw
-!EXTPROGTARGET_2;queue-processed
-!FILEBROWSER_ADDDELTEMPLATE;Add/Del templates...
-!FILEBROWSER_APPLYPROFILE_PARTIAL;Apply - partial
-!FILEBROWSER_AUTODARKFRAME;Auto dark-frame
-!FILEBROWSER_AUTOFLATFIELD;Auto flat-field
-!FILEBROWSER_BROWSEPATHBUTTONHINT;Click to open specified path, reload folder and apply "find" keywords.
-!FILEBROWSER_BROWSEPATHHINT;Type a path to navigate to.\n\nKeyboard shortcuts:\nCtrl-o to focus to the path text box.\nEnter / Ctrl-Enter to browse there;\nEsc to clear changes.\nShift-Esc to remove focus.\n\nPath shortcuts:\n~ - user's home directory.\n! - user's pictures directory
-!FILEBROWSER_CACHE;Cache
-!FILEBROWSER_CACHECLEARFROMFULL;Clear all including cached profiles
-!FILEBROWSER_CACHECLEARFROMPARTIAL;Clear all except cached profiles
-!FILEBROWSER_COLORLABEL_TOOLTIP;Color label.\n\nUse dropdown menu or shortcuts:\nShift-Ctrl-0 No Color\nShift-Ctrl-1 Red\nShift-Ctrl-2 Yellow\nShift-Ctrl-3 Green\nShift-Ctrl-4 Blue\nShift-Ctrl-5 Purple
-!FILEBROWSER_CURRENT_NAME;Current name:
-!FILEBROWSER_DARKFRAME;Dark-frame
-!FILEBROWSER_DELETEDLGMSGINCLPROC;Are you sure you want to delete the selected %1 files including a queue-processed version?
-!FILEBROWSER_EXTPROGMENU;Open with
-!FILEBROWSER_FLATFIELD;Flat-Field
-!FILEBROWSER_MOVETODARKFDIR;Move to dark-frames directory
-!FILEBROWSER_MOVETOFLATFIELDDIR;Move to flat-fields directory
-!FILEBROWSER_NEW_NAME;New name:
-!FILEBROWSER_OPENDEFAULTVIEWER;Windows default viewer (queue-processed)
-!FILEBROWSER_POPUPCOLORLABEL;Color label
-!FILEBROWSER_POPUPCOLORLABEL0;Label: None
-!FILEBROWSER_POPUPCOLORLABEL1;Label: Red
-!FILEBROWSER_POPUPCOLORLABEL2;Label: Yellow
-!FILEBROWSER_POPUPCOLORLABEL3;Label: Green
-!FILEBROWSER_POPUPCOLORLABEL4;Label: Blue
-!FILEBROWSER_POPUPCOLORLABEL5;Label: Purple
-!FILEBROWSER_POPUPCOPYTO;Copy to...
-!FILEBROWSER_POPUPFILEOPERATIONS;File operations
-!FILEBROWSER_POPUPMOVETO;Move to...
-!FILEBROWSER_POPUPPROCESSFAST;Put to queue (Fast export)
-!FILEBROWSER_POPUPPROFILEOPERATIONS;Processing profile operations
-!FILEBROWSER_POPUPRANK;Rank
-!FILEBROWSER_POPUPRANK0;Unrank
-!FILEBROWSER_POPUPRANK1;Rank 1 *
-!FILEBROWSER_POPUPRANK2;Rank 2 **
-!FILEBROWSER_POPUPRANK3;Rank 3 ***
-!FILEBROWSER_POPUPRANK4;Rank 4 ****
-!FILEBROWSER_POPUPRANK5;Rank 5 *****
-!FILEBROWSER_POPUPREMOVEINCLPROC;Delete with output from queue
-!FILEBROWSER_QUERYBUTTONHINT;Clear the Find query
-!FILEBROWSER_QUERYHINT;Type filenames to search for. Supports partial filenames. Separate the search terms using commas, e.g.\n1001,1004,1199\n\nExclude search terms by prefixing them with !=\ne.g.\n!=1001,1004,1199\n\nShortcuts:\nCtrl-f - focus the Find box,\nEnter - search,\nEsc - clear the Find box,\nShift-Esc - defocus the Find box.
-!FILEBROWSER_QUERYLABEL; Find:
-!FILEBROWSER_RANK1_TOOLTIP;Rank 1 *\nShortcut: Shift-1
-!FILEBROWSER_RANK2_TOOLTIP;Rank 2 *\nShortcut: Shift-2
-!FILEBROWSER_RANK3_TOOLTIP;Rank 3 *\nShortcut: Shift-3
-!FILEBROWSER_RANK4_TOOLTIP;Rank 4 *\nShortcut: Shift-4
-!FILEBROWSER_RANK5_TOOLTIP;Rank 5 *\nShortcut: Shift-5
-!FILEBROWSER_RESETDEFAULTPROFILE;Reset to default
-!FILEBROWSER_SELECTDARKFRAME;Select dark-frame...
-!FILEBROWSER_SELECTFLATFIELD;Select flat-field...
-!FILEBROWSER_SHOWCOLORLABEL1HINT;Show images labeled Red.\nShortcut: Alt-1
-!FILEBROWSER_SHOWCOLORLABEL2HINT;Show images labeled Yellow.\nShortcut: Alt-2
-!FILEBROWSER_SHOWCOLORLABEL3HINT;Show images labeled Green.\nShortcut: Alt-3
-!FILEBROWSER_SHOWCOLORLABEL4HINT;Show images labeled Blue.\nShortcut: Alt-4
-!FILEBROWSER_SHOWCOLORLABEL5HINT;Show images labeled Purple.\nShortcut: Alt-5
-!FILEBROWSER_SHOWEDITEDHINT;Show edited images.\nShortcut: 7
-!FILEBROWSER_SHOWEDITEDNOTHINT;Show not edited images.\nShortcut: 6
-!FILEBROWSER_SHOWEXIFINFO;Show Exif info.\n\nShortcuts:\ni - Multiple Editor Tabs Mode,\nAlt-i - Single Editor Tab Mode.
-!FILEBROWSER_SHOWNOTTRASHHINT;Show only non-deleted images.
-!FILEBROWSER_SHOWORIGINALHINT;Show only original images.\n\nWhen several images exist with the same filename but different extensions, the one considered original is the one whose extension is nearest the top of the parsed extensions list in Preferences > File Browser > Parsed Extensions.
-!FILEBROWSER_SHOWRECENTLYSAVEDHINT;Show saved images.\nShortcut: Alt-7
-!FILEBROWSER_SHOWRECENTLYSAVEDNOTHINT;Show unsaved images.\nShortcut: Alt-6
-!FILEBROWSER_SHOWUNCOLORHINT;Show images without a color label.\nShortcut: Alt-0
-!FILEBROWSER_UNRANK_TOOLTIP;Unrank.\nShortcut: Shift-0
-!FILECHOOSER_FILTER_ANY;All files
-!FILECHOOSER_FILTER_COLPROF;Color profiles (*.icc)
-!FILECHOOSER_FILTER_CURVE;Curve files
-!FILECHOOSER_FILTER_LCP;Lens correction profiles
-!FILECHOOSER_FILTER_PP;Processing profiles
-!FILECHOOSER_FILTER_SAME;Same format as current photo
-!FILECHOOSER_FILTER_TIFF;TIFF files
-!GENERAL_AFTER;After
-!GENERAL_APPLY;Apply
-!GENERAL_ASIMAGE;As Image
-!GENERAL_AUTO;Automatic
-!GENERAL_BEFORE;Before
-!GENERAL_CLOSE;Close
-!GENERAL_CURRENT;Current
-!GENERAL_FILE;File
-!GENERAL_NONE;None
-!GENERAL_OPEN;Open
-!GENERAL_RESET;Reset
-!GENERAL_SAVE_AS;Save as...
-!GENERAL_SLIDER;Slider
-!GENERAL_UNCHANGED;(Unchanged)
-!GENERAL_WARNING;Warning
-!GIMP_PLUGIN_INFO;Welcome to the RawTherapee GIMP plugin!\nOnce you are done editing, simply close the main RawTherapee window and the image will be automatically imported in GIMP.
-!HISTOGRAM_TOOLTIP_BAR;Show/Hide RGB indicator bar.
-!HISTOGRAM_TOOLTIP_CHRO;Show/Hide chromaticity histogram.
-!HISTOGRAM_TOOLTIP_MODE;Toggle between linear, log-linear and log-log scaling of the histogram.
-!HISTOGRAM_TOOLTIP_RAW;Show/Hide raw histogram.
-!HISTORY_MSG_82;Profile changed
-!HISTORY_MSG_83;S/H - Sharp mask
-!HISTORY_MSG_84;Perspective correction
-!HISTORY_MSG_85;Lens Correction - LCP file
-!HISTORY_MSG_86;RGB Curves - Luminosity mode
-!HISTORY_MSG_87;Impulse Noise Reduction
-!HISTORY_MSG_88;Impulse NR threshold
-!HISTORY_MSG_89;Noise Reduction
-!HISTORY_MSG_90;NR - Luminance
-!HISTORY_MSG_91;NR - Chrominance master
-!HISTORY_MSG_92;NR - Gamma
-!HISTORY_MSG_93;CbDL - Value
-!HISTORY_MSG_94;Contrast by Detail Levels
-!HISTORY_MSG_95;L*a*b* - Chromaticity
-!HISTORY_MSG_96;L*a*b* - a* curve
-!HISTORY_MSG_97;L*a*b* - b* curve
-!HISTORY_MSG_98;Demosaicing method
-!HISTORY_MSG_99;Hot pixel filter
-!HISTORY_MSG_100;Exposure - Saturation
-!HISTORY_MSG_101;HSV - Hue
-!HISTORY_MSG_102;HSV - Saturation
-!HISTORY_MSG_103;HSV - Value
-!HISTORY_MSG_104;HSV Equalizer
-!HISTORY_MSG_105;Defringe
-!HISTORY_MSG_106;Defringe - Radius
-!HISTORY_MSG_107;Defringe - Threshold
-!HISTORY_MSG_108;Exposure - HLC threshold
-!HISTORY_MSG_109;Resize - Bounding box
-!HISTORY_MSG_110;Resize - Applies to
-!HISTORY_MSG_111;L*a*b* - Avoid color shift
-!HISTORY_MSG_112;--unused--
-!HISTORY_MSG_113;L*a*b* - Red/skin prot.
-!HISTORY_MSG_114;DCB iterations
-!HISTORY_MSG_115;False color suppression
-!HISTORY_MSG_116;DCB enhancement
-!HISTORY_MSG_117;Raw CA correction - Red
-!HISTORY_MSG_118;Raw CA correction - Blue
-!HISTORY_MSG_119;Line noise filter
-!HISTORY_MSG_120;Green equilibration
-!HISTORY_MSG_121;Raw CA Correction - Auto
-!HISTORY_MSG_122;Dark-Frame - Auto-selection
-!HISTORY_MSG_123;Dark-Frame - File
-!HISTORY_MSG_124;White point correction
-!HISTORY_MSG_126;Flat-Field - File
-!HISTORY_MSG_127;Flat-Field - Auto-selection
-!HISTORY_MSG_128;Flat-Field - Blur radius
-!HISTORY_MSG_129;Flat-Field - Blur type
-!HISTORY_MSG_130;Auto distortion correction
-!HISTORY_MSG_131;NR - Luma
-!HISTORY_MSG_132;NR - Chroma
-!HISTORY_MSG_133;Output gamma
-!HISTORY_MSG_134;Free gamma
-!HISTORY_MSG_135;Free gamma
-!HISTORY_MSG_136;Free gamma slope
-!HISTORY_MSG_137;Black level - Green 1
-!HISTORY_MSG_138;Black level - Red
-!HISTORY_MSG_139;Black level - Blue
-!HISTORY_MSG_140;Black level - Green 2
-!HISTORY_MSG_141;Black level - Link greens
-!HISTORY_MSG_142;ES - Iterations
-!HISTORY_MSG_143;ES - Quantity
-!HISTORY_MSG_144;Microcontrast - Quantity
-!HISTORY_MSG_145;Microcontrast - Uniformity
-!HISTORY_MSG_146;Edge sharpening
-!HISTORY_MSG_147;ES - Luminance only
-!HISTORY_MSG_148;Microcontrast
-!HISTORY_MSG_149;Microcontrast - 3×3 matrix
-!HISTORY_MSG_150;Post-demosaic artifact/noise red.
-!HISTORY_MSG_151;Vibrance
-!HISTORY_MSG_152;Vib - Pastel tones
-!HISTORY_MSG_153;Vib - Saturated tones
-!HISTORY_MSG_154;Vib - Protect skin-tones
-!HISTORY_MSG_155;Vib - Avoid color shift
-!HISTORY_MSG_156;Vib - Link pastel/saturated
-!HISTORY_MSG_157;Vib - P/S threshold
-!HISTORY_MSG_158;TM - Strength
-!HISTORY_MSG_159;TM - Edge stopping
-!HISTORY_MSG_160;TM - Scale
-!HISTORY_MSG_161;TM - Reweighting iterates
-!HISTORY_MSG_162;Tone Mapping
-!HISTORY_MSG_163;RGB Curves - Red
-!HISTORY_MSG_164;RGB Curves - Green
-!HISTORY_MSG_165;RGB Curves - Blue
-!HISTORY_MSG_166;Exposure - Reset
-!HISTORY_MSG_167;Demosaicing method
-!HISTORY_MSG_168;L*a*b* - CC curve
-!HISTORY_MSG_169;L*a*b* - CH curve
-!HISTORY_MSG_170;Vibrance - HH curve
-!HISTORY_MSG_171;L*a*b* - LC curve
-!HISTORY_MSG_172;L*a*b* - Restrict LC
-!HISTORY_MSG_173;NR - Detail recovery
-!HISTORY_MSG_174;CIECAM02
-!HISTORY_MSG_175;CAM02 - CAT02 adaptation
-!HISTORY_MSG_176;CAM02 - Viewing surround
-!HISTORY_MSG_177;CAM02 - Scene luminosity
-!HISTORY_MSG_178;CAM02 - Viewing luminosity
-!HISTORY_MSG_179;CAM02 - White-point model
-!HISTORY_MSG_180;CAM02 - Lightness (J)
-!HISTORY_MSG_181;CAM02 - Chroma (C)
-!HISTORY_MSG_182;CAM02 - Automatic CAT02
-!HISTORY_MSG_183;CAM02 - Contrast (J)
-!HISTORY_MSG_184;CAM02 - Scene surround
-!HISTORY_MSG_185;CAM02 - Gamut control
-!HISTORY_MSG_186;CAM02 - Algorithm
-!HISTORY_MSG_187;CAM02 - Red/skin prot.
-!HISTORY_MSG_188;CAM02 - Brightness (Q)
-!HISTORY_MSG_189;CAM02 - Contrast (Q)
-!HISTORY_MSG_190;CAM02 - Saturation (S)
-!HISTORY_MSG_191;CAM02 - Colorfulness (M)
-!HISTORY_MSG_192;CAM02 - Hue (h)
-!HISTORY_MSG_193;CAM02 - Tone curve 1
-!HISTORY_MSG_194;CAM02 - Tone curve 2
-!HISTORY_MSG_195;CAM02 - Tone curve 1
-!HISTORY_MSG_196;CAM02 - Tone curve 2
-!HISTORY_MSG_197;CAM02 - Color curve
-!HISTORY_MSG_198;CAM02 - Color curve
-!HISTORY_MSG_199;CAM02 - Output histograms
-!HISTORY_MSG_200;CAM02 - Tone mapping
-!HISTORY_MSG_201;NR - Chrominance - R&G
-!HISTORY_MSG_202;NR - Chrominance - B&Y
-!HISTORY_MSG_203;NR - Color space
-!HISTORY_MSG_204;LMMSE enhancement steps
-!HISTORY_MSG_205;CAM02 - Hot/bad pixel filter
-!HISTORY_MSG_206;CAT02 - Auto scene luminosity
-!HISTORY_MSG_207;Defringe - Hue curve
-!HISTORY_MSG_208;WB - B/R equalizer
-!HISTORY_MSG_210;GF - Angle
-!HISTORY_MSG_211;Graduated Filter
-!HISTORY_MSG_212;VF - Strength
-!HISTORY_MSG_213;Vignette Filter
-!HISTORY_MSG_214;Black-and-White
-!HISTORY_MSG_215;B&W - CM - Red
-!HISTORY_MSG_216;B&W - CM - Green
-!HISTORY_MSG_217;B&W - CM - Blue
-!HISTORY_MSG_218;B&W - Gamma - Red
-!HISTORY_MSG_219;B&W - Gamma - Green
-!HISTORY_MSG_220;B&W - Gamma - Blue
-!HISTORY_MSG_221;B&W - Color filter
-!HISTORY_MSG_222;B&W - Presets
-!HISTORY_MSG_223;B&W - CM - Orange
-!HISTORY_MSG_224;B&W - CM - Yellow
-!HISTORY_MSG_225;B&W - CM - Cyan
-!HISTORY_MSG_226;B&W - CM - Magenta
-!HISTORY_MSG_227;B&W - CM - Purple
-!HISTORY_MSG_228;B&W - Luminance equalizer
-!HISTORY_MSG_229;B&W - Luminance equalizer
-!HISTORY_MSG_230;B&W - Mode
-!HISTORY_MSG_231;B&W - 'Before' curve
-!HISTORY_MSG_232;B&W - 'Before' curve type
-!HISTORY_MSG_233;B&W - 'After' curve
-!HISTORY_MSG_234;B&W - 'After' curve type
-!HISTORY_MSG_235;B&W - CM - Auto
-!HISTORY_MSG_236;--unused--
-!HISTORY_MSG_237;B&W - CM
-!HISTORY_MSG_238;GF - Feather
-!HISTORY_MSG_239;GF - Strength
-!HISTORY_MSG_240;GF - Center
-!HISTORY_MSG_241;VF - Feather
-!HISTORY_MSG_242;VF - Roundness
-!HISTORY_MSG_243;VC - Radius
-!HISTORY_MSG_244;VC - Strength
-!HISTORY_MSG_245;VC - Center
-!HISTORY_MSG_246;L*a*b* - CL curve
-!HISTORY_MSG_247;L*a*b* - LH curve
-!HISTORY_MSG_248;L*a*b* - HH curve
-!HISTORY_MSG_249;CbDL - Threshold
-!HISTORY_MSG_250;NR - Enhanced
-!HISTORY_MSG_251;B&W - Algorithm
-!HISTORY_MSG_252;CbDL - Skin tar/prot
-!HISTORY_MSG_253;CbDL - Reduce artifacts
-!HISTORY_MSG_254;CbDL - Skin hue
-!HISTORY_MSG_255;NR - Median filter
-!HISTORY_MSG_256;NR - Median - Type
-!HISTORY_MSG_257;Color Toning
-!HISTORY_MSG_258;CT - Color curve
-!HISTORY_MSG_259;CT - Opacity curve
-!HISTORY_MSG_260;CT - a*[b*] opacity
-!HISTORY_MSG_261;CT - Method
-!HISTORY_MSG_262;CT - b* opacity
-!HISTORY_MSG_263;CT - Shadows - Red
-!HISTORY_MSG_264;CT - Shadows - Green
-!HISTORY_MSG_265;CT - Shadows - Blue
-!HISTORY_MSG_266;CT - Mid - Red
-!HISTORY_MSG_267;CT - Mid - Green
-!HISTORY_MSG_268;CT - Mid - Blue
-!HISTORY_MSG_269;CT - High - Red
-!HISTORY_MSG_270;CT - High - Green
-!HISTORY_MSG_271;CT - High - Blue
-!HISTORY_MSG_272;CT - Balance
-!HISTORY_MSG_273;CT - Color Balance SMH
-!HISTORY_MSG_274;CT - Sat. Shadows
-!HISTORY_MSG_275;CT - Sat. Highlights
-!HISTORY_MSG_276;CT - Opacity
-!HISTORY_MSG_277;--unused--
-!HISTORY_MSG_278;CT - Preserve luminance
-!HISTORY_MSG_279;CT - Shadows
-!HISTORY_MSG_280;CT - Highlights
-!HISTORY_MSG_281;CT - Sat. strength
-!HISTORY_MSG_282;CT - Sat. threshold
-!HISTORY_MSG_283;CT - Strength
-!HISTORY_MSG_284;CT - Auto sat. protection
-!HISTORY_MSG_285;NR - Median - Method
-!HISTORY_MSG_286;NR - Median - Type
-!HISTORY_MSG_287;NR - Median - Iterations
-!HISTORY_MSG_288;Flat-Field - Clip control
-!HISTORY_MSG_289;Flat-Field - Clip control - Auto
-!HISTORY_MSG_290;Black Level - Red
-!HISTORY_MSG_291;Black Level - Green
-!HISTORY_MSG_292;Black Level - Blue
-!HISTORY_MSG_293;Film Simulation
-!HISTORY_MSG_294;Film Simulation - Strength
-!HISTORY_MSG_295;Film Simulation - Film
-!HISTORY_MSG_296;NR - Luminance curve
-!HISTORY_MSG_297;NR - Mode
-!HISTORY_MSG_298;Dead pixel filter
-!HISTORY_MSG_299;NR - Chrominance curve
-!HISTORY_MSG_300;-
-!HISTORY_MSG_301;NR - Luma control
-!HISTORY_MSG_302;NR - Chroma method
-!HISTORY_MSG_303;NR - Chroma method
-!HISTORY_MSG_304;W - Contrast levels
-!HISTORY_MSG_305;Wavelet Levels
-!HISTORY_MSG_306;W - Process
-!HISTORY_MSG_307;W - Process
-!HISTORY_MSG_308;W - Process direction
-!HISTORY_MSG_309;W - ES - Detail
-!HISTORY_MSG_310;W - Residual - Sky tar/prot
-!HISTORY_MSG_311;W - Wavelet levels
-!HISTORY_MSG_312;W - Residual - Shadows threshold
-!HISTORY_MSG_313;W - Chroma - Sat/past
-!HISTORY_MSG_314;W - Gamut - Reduce artifacts
-!HISTORY_MSG_315;W - Residual - Contrast
-!HISTORY_MSG_316;W - Gamut - Skin tar/prot
-!HISTORY_MSG_317;W - Gamut - Skin hue
-!HISTORY_MSG_318;W - Contrast - Highlight levels
-!HISTORY_MSG_319;W - Contrast - Highlight range
-!HISTORY_MSG_320;W - Contrast - Shadow range
-!HISTORY_MSG_321;W - Contrast - Shadow levels
-!HISTORY_MSG_322;W - Gamut - Avoid color shift
-!HISTORY_MSG_323;W - ES - Local contrast
-!HISTORY_MSG_324;W - Chroma - Pastel
-!HISTORY_MSG_325;W - Chroma - Saturated
-!HISTORY_MSG_326;W - Chroma - Method
-!HISTORY_MSG_327;W - Contrast - Apply to
-!HISTORY_MSG_328;W - Chroma - Link strength
-!HISTORY_MSG_329;W - Toning - Opacity RG
-!HISTORY_MSG_330;W - Toning - Opacity BY
-!HISTORY_MSG_331;W - Contrast levels - Extra
-!HISTORY_MSG_332;W - Tiling method
-!HISTORY_MSG_333;W - Residual - Shadows
-!HISTORY_MSG_334;W - Residual - Chroma
-!HISTORY_MSG_335;W - Residual - Highlights
-!HISTORY_MSG_336;W - Residual - Highlights threshold
-!HISTORY_MSG_337;W - Residual - Sky hue
-!HISTORY_MSG_338;W - ES - Radius
-!HISTORY_MSG_339;W - ES - Strength
-!HISTORY_MSG_340;W - Strength
-!HISTORY_MSG_341;W - Edge performance
-!HISTORY_MSG_342;W - ES - First level
-!HISTORY_MSG_343;W - Chroma levels
-!HISTORY_MSG_344;W - Meth chroma sl/cur
-!HISTORY_MSG_345;W - ES - Local contrast
-!HISTORY_MSG_346;W - ES - Local contrast method
-!HISTORY_MSG_347;W - Denoise - Level 1
-!HISTORY_MSG_348;W - Denoise - Level 2
-!HISTORY_MSG_349;W - Denoise - Level 3
-!HISTORY_MSG_350;W - ES - Edge detection
-!HISTORY_MSG_351;W - Residual - HH curve
-!HISTORY_MSG_352;W - Background
-!HISTORY_MSG_353;W - ES - Gradient sensitivity
-!HISTORY_MSG_354;W - ES - Enhanced
-!HISTORY_MSG_355;W - ES - Threshold low
-!HISTORY_MSG_356;W - ES - Threshold high
-!HISTORY_MSG_357;W - Denoise - Link with ES
-!HISTORY_MSG_358;W - Gamut - CH
-!HISTORY_MSG_359;Hot/Dead - Threshold
-!HISTORY_MSG_360;TM - Gamma
-!HISTORY_MSG_361;W - Final - Chroma balance
-!HISTORY_MSG_362;W - Residual - Compression method
-!HISTORY_MSG_363;W - Residual - Compression strength
-!HISTORY_MSG_364;W - Final - Contrast balance
-!HISTORY_MSG_365;W - Final - Delta balance
-!HISTORY_MSG_366;W - Residual - Compression gamma
-!HISTORY_MSG_367;W - Final - 'After' contrast curve
-!HISTORY_MSG_368;W - Final - Contrast balance
-!HISTORY_MSG_369;W - Final - Balance method
-!HISTORY_MSG_370;W - Final - Local contrast curve
-!HISTORY_MSG_371;Post-Resize Sharpening
-!HISTORY_MSG_372;PRS USM - Radius
-!HISTORY_MSG_373;PRS USM - Amount
-!HISTORY_MSG_374;PRS USM - Threshold
-!HISTORY_MSG_375;PRS USM - Sharpen only edges
-!HISTORY_MSG_376;PRS USM - Edge detection radius
-!HISTORY_MSG_377;PRS USM - Edge tolerance
-!HISTORY_MSG_378;PRS USM - Halo control
-!HISTORY_MSG_379;PRS USM - Halo control amount
-!HISTORY_MSG_380;PRS - Method
-!HISTORY_MSG_381;PRS RLD - Radius
-!HISTORY_MSG_382;PRS RLD - Amount
-!HISTORY_MSG_383;PRS RLD - Damping
-!HISTORY_MSG_384;PRS RLD - Iterations
-!HISTORY_MSG_385;W - Residual - Color Balance
-!HISTORY_MSG_386;W - Residual - CB green high
-!HISTORY_MSG_387;W - Residual - CB blue high
-!HISTORY_MSG_388;W - Residual - CB green mid
-!HISTORY_MSG_389;W - Residual - CB blue mid
-!HISTORY_MSG_390;W - Residual - CB green low
-!HISTORY_MSG_391;W - Residual - CB blue low
-!HISTORY_MSG_392;W - Residual - Color Balance
-!HISTORY_MSG_393;DCP - Look table
-!HISTORY_MSG_394;DCP - Baseline exposure
-!HISTORY_MSG_395;DCP - Base table
-!HISTORY_MSG_396;W - Contrast sub-tool
-!HISTORY_MSG_397;W - Chroma sub-tool
-!HISTORY_MSG_398;W - ES sub-tool
-!HISTORY_MSG_399;W - Residual sub-tool
-!HISTORY_MSG_400;W - Final sub-tool
-!HISTORY_MSG_401;W - Toning sub-tool
-!HISTORY_MSG_402;W - Denoise sub-tool
-!HISTORY_MSG_403;W - ES - Edge sensitivity
-!HISTORY_MSG_404;W - ES - Base amplification
-!HISTORY_MSG_405;W - Denoise - Level 4
-!HISTORY_MSG_406;W - ES - Neighboring pixels
-!HISTORY_MSG_407;Retinex - Method
-!HISTORY_MSG_408;Retinex - Radius
-!HISTORY_MSG_409;Retinex - Contrast
-!HISTORY_MSG_410;Retinex - Offset
-!HISTORY_MSG_411;Retinex - Strength
-!HISTORY_MSG_412;Retinex - Gaussian gradient
-!HISTORY_MSG_413;Retinex - Contrast
-!HISTORY_MSG_414;Retinex - Histogram - Lab
-!HISTORY_MSG_415;Retinex - Transmission
-!HISTORY_MSG_416;Retinex
-!HISTORY_MSG_417;Retinex - Transmission median
-!HISTORY_MSG_418;Retinex - Threshold
-!HISTORY_MSG_419;Retinex - Color space
-!HISTORY_MSG_420;Retinex - Histogram - HSL
-!HISTORY_MSG_421;Retinex - Gamma
-!HISTORY_MSG_422;Retinex - Gamma
-!HISTORY_MSG_423;Retinex - Gamma slope
-!HISTORY_MSG_424;Retinex - HL threshold
-!HISTORY_MSG_425;Retinex - Log base
-!HISTORY_MSG_426;Retinex - Hue equalizer
-!HISTORY_MSG_427;Output rendering intent
-!HISTORY_MSG_428;Monitor rendering intent
-!HISTORY_MSG_429;Retinex - Iterations
-!HISTORY_MSG_430;Retinex - Transmission gradient
-!HISTORY_MSG_431;Retinex - Strength gradient
-!HISTORY_MSG_432;Retinex - M - Highlights
-!HISTORY_MSG_433;Retinex - M - Highlights TW
-!HISTORY_MSG_434;Retinex - M - Shadows
-!HISTORY_MSG_435;Retinex - M - Shadows TW
-!HISTORY_MSG_436;Retinex - M - Radius
-!HISTORY_MSG_437;Retinex - M - Method
-!HISTORY_MSG_438;Retinex - M - Equalizer
-!HISTORY_MSG_439;Retinex - Process
-!HISTORY_MSG_440;CbDL - Method
-!HISTORY_MSG_441;Retinex - Gain transmission
-!HISTORY_MSG_442;Retinex - Scale
-!HISTORY_MSG_443;Output black point compensation
-!HISTORY_MSG_444;WB - Temp bias
-!HISTORY_MSG_445;Raw sub-image
-!HISTORY_MSG_449;PS - ISO adaption
-!HISTORY_MSG_452;PS - Show motion
-!HISTORY_MSG_453;PS - Show mask only
-!HISTORY_MSG_457;PS - Check red/blue
-!HISTORY_MSG_462;PS - Check green
-!HISTORY_MSG_464;PS - Blur motion mask
-!HISTORY_MSG_465;PS - Blur radius
-!HISTORY_MSG_468;PS - Fill holes
-!HISTORY_MSG_469;PS - Median
-!HISTORY_MSG_471;PS - Motion correction
-!HISTORY_MSG_472;PS - Smooth transitions
-!HISTORY_MSG_473;PS - Use LMMSE
-!HISTORY_MSG_474;PS - Equalize
-!HISTORY_MSG_475;PS - Equalize channel
-!HISTORY_MSG_476;CAM02 - Temp out
-!HISTORY_MSG_477;CAM02 - Green out
-!HISTORY_MSG_478;CAM02 - Yb out
-!HISTORY_MSG_479;CAM02 - CAT02 adaptation out
-!HISTORY_MSG_480;CAM02 - Automatic CAT02 out
-!HISTORY_MSG_481;CAM02 - Temp scene
-!HISTORY_MSG_482;CAM02 - Green scene
-!HISTORY_MSG_483;CAM02 - Yb scene
-!HISTORY_MSG_484;CAM02 - Auto Yb scene
-!HISTORY_MSG_485;Lens Correction
-!HISTORY_MSG_486;Lens Correction - Camera
-!HISTORY_MSG_487;Lens Correction - Lens
-!HISTORY_MSG_488;Dynamic Range Compression
-!HISTORY_MSG_489;DRC - Detail
-!HISTORY_MSG_490;DRC - Amount
-!HISTORY_MSG_491;White Balance
-!HISTORY_MSG_492;RGB Curves
-!HISTORY_MSG_493;L*a*b* Adjustments
-!HISTORY_MSG_CLAMPOOG;Clip out-of-gamut colors
-!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_AB;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_CHANNEL;CT - Channel
-!HISTORY_MSG_COLORTONING_LABREGION_CHROMATICITYMASK;CT - region C mask
-!HISTORY_MSG_COLORTONING_LABREGION_HUEMASK;CT - H mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESS;CT - Lightness
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESSMASK;CT - L mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIST;CT - List
-!HISTORY_MSG_COLORTONING_LABREGION_MASKBLUR;CT - region mask blur
-!HISTORY_MSG_COLORTONING_LABREGION_OFFSET;CT - region offset
-!HISTORY_MSG_COLORTONING_LABREGION_POWER;CT - region power
-!HISTORY_MSG_COLORTONING_LABREGION_SATURATION;CT - Saturation
-!HISTORY_MSG_COLORTONING_LABREGION_SHOWMASK;CT - region show mask
-!HISTORY_MSG_COLORTONING_LABREGION_SLOPE;CT - region slope
-!HISTORY_MSG_DEHAZE_DEPTH;Dehaze - Depth
-!HISTORY_MSG_DEHAZE_ENABLED;Haze Removal
-!HISTORY_MSG_DEHAZE_SHOW_DEPTH_MAP;Dehaze - Show depth map
-!HISTORY_MSG_DEHAZE_STRENGTH;Dehaze - Strength
-!HISTORY_MSG_DUALDEMOSAIC_AUTO_CONTRAST;Dual demosaic - Auto threshold
-!HISTORY_MSG_DUALDEMOSAIC_CONTRAST;Dual demosaic - Contrast threshold
-!HISTORY_MSG_HISTMATCHING;Auto-matched tone curve
-!HISTORY_MSG_ICM_OUTPUT_PRIMARIES;Output - Primaries
-!HISTORY_MSG_ICM_OUTPUT_TEMP;Output - ICC-v4 illuminant D
-!HISTORY_MSG_ICM_OUTPUT_TYPE;Output - Type
-!HISTORY_MSG_ICM_WORKING_GAMMA;Working - Gamma
-!HISTORY_MSG_ICM_WORKING_SLOPE;Working - Slope
-!HISTORY_MSG_ICM_WORKING_TRC_METHOD;Working - TRC method
-!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
-!HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness
-!HISTORY_MSG_LOCALCONTRAST_ENABLED;Local Contrast
-!HISTORY_MSG_LOCALCONTRAST_LIGHTNESS;Local Contrast - Lightness
-!HISTORY_MSG_LOCALCONTRAST_RADIUS;Local Contrast - Radius
-!HISTORY_MSG_METADATA_MODE;Metadata copy mode
-!HISTORY_MSG_MICROCONTRAST_CONTRAST;Microcontrast - Contrast threshold
-!HISTORY_MSG_PIXELSHIFT_DEMOSAIC;PS - Demosaic method for motion
-!HISTORY_MSG_PREPROCESS_LINEDENOISE_DIRECTION;Line noise filter direction
-!HISTORY_MSG_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!HISTORY_MSG_PRSHARPEN_CONTRAST;PRS - Contrast threshold
-!HISTORY_MSG_RAWCACORR_AUTOIT;Raw CA Correction - Iterations
-!HISTORY_MSG_RAWCACORR_COLORSHIFT;Raw CA Correction - Avoid color shift
-!HISTORY_MSG_RAW_BORDER;Raw border
-!HISTORY_MSG_RESIZE_ALLOWUPSCALING;Resize - Allow upscaling
-!HISTORY_MSG_SHARPENING_BLUR;Sharpening - Blur radius
-!HISTORY_MSG_SHARPENING_CONTRAST;Sharpening - Contrast threshold
-!HISTORY_MSG_SH_COLORSPACE;S/H - Colorspace
-!HISTORY_MSG_SOFTLIGHT_ENABLED;Soft light
-!HISTORY_MSG_SOFTLIGHT_STRENGTH;Soft light - Strength
-!HISTORY_MSG_TM_FATTAL_ANCHOR;DRC - Anchor
-!HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s
-!ICCPROFCREATOR_COPYRIGHT;Copyright:
-!ICCPROFCREATOR_COPYRIGHT_RESET_TOOLTIP;Reset to the default copyright, granted to "RawTherapee, CC0"
-!ICCPROFCREATOR_CUSTOM;Custom
-!ICCPROFCREATOR_DESCRIPTION;Description:
-!ICCPROFCREATOR_DESCRIPTION_ADDPARAM;Append gamma and slope values to the description
-!ICCPROFCREATOR_DESCRIPTION_TOOLTIP;Leave empty to set the default description.
-!ICCPROFCREATOR_GAMMA;Gamma
-!ICCPROFCREATOR_ICCVERSION;ICC version:
-!ICCPROFCREATOR_ILL;Illuminant:
-!ICCPROFCREATOR_ILL_41;D41
-!ICCPROFCREATOR_ILL_50;D50
-!ICCPROFCREATOR_ILL_55;D55
-!ICCPROFCREATOR_ILL_60;D60
-!ICCPROFCREATOR_ILL_65;D65
-!ICCPROFCREATOR_ILL_80;D80
-!ICCPROFCREATOR_ILL_DEF;Default
-!ICCPROFCREATOR_ILL_INC;StdA 2856K
-!ICCPROFCREATOR_ILL_TOOLTIP;You can only set the illuminant for ICC v4 profiles.
-!ICCPROFCREATOR_PRIMARIES;Primaries:
-!ICCPROFCREATOR_PRIM_ACESP0;ACES AP0
-!ICCPROFCREATOR_PRIM_ACESP1;ACES AP1
-!ICCPROFCREATOR_PRIM_ADOBE;Adobe RGB (1998)
-!ICCPROFCREATOR_PRIM_BEST;BestRGB
-!ICCPROFCREATOR_PRIM_BETA;BetaRGB
-!ICCPROFCREATOR_PRIM_BLUX;Blue X
-!ICCPROFCREATOR_PRIM_BLUY;Blue Y
-!ICCPROFCREATOR_PRIM_BRUCE;BruceRGB
-!ICCPROFCREATOR_PRIM_GREX;Green X
-!ICCPROFCREATOR_PRIM_GREY;Green Y
-!ICCPROFCREATOR_PRIM_PROPH;Prophoto
-!ICCPROFCREATOR_PRIM_REC2020;Rec2020
-!ICCPROFCREATOR_PRIM_REDX;Red X
-!ICCPROFCREATOR_PRIM_REDY;Red Y
-!ICCPROFCREATOR_PRIM_SRGB;sRGB
-!ICCPROFCREATOR_PRIM_TOOLTIP;You can only set custom primaries for ICC v4 profiles.
-!ICCPROFCREATOR_PRIM_WIDEG;Widegamut
-!ICCPROFCREATOR_PROF_V2;ICC v2
-!ICCPROFCREATOR_PROF_V4;ICC v4
-!ICCPROFCREATOR_SAVEDIALOG_TITLE;Save ICC profile as...
-!ICCPROFCREATOR_SLOPE;Slope
-!ICCPROFCREATOR_TRC_PRESET;Tone response curve:
-!IPTCPANEL_CATEGORYHINT;Identifies the subject of the image in the opinion of the provider.
-!IPTCPANEL_CITYHINT;Enter the name of the city pictured in this image.
-!IPTCPANEL_COPYRIGHT;Copyright notice
-!IPTCPANEL_COPYRIGHTHINT;Enter a Notice on the current owner of the Copyright for this image, such as ©2008 Jane Doe.
-!IPTCPANEL_COUNTRYHINT;Enter the name of the country pictured in this image.
-!IPTCPANEL_CREATOR;Creator
-!IPTCPANEL_CREATORHINT;Enter the name of the person that created this image.
-!IPTCPANEL_CREATORJOBTITLE;Creator's job title
-!IPTCPANEL_CREATORJOBTITLEHINT;Enter the Job Title of the person listed in the Creator field.
-!IPTCPANEL_DATECREATEDHINT;Enter the Date the image was taken.
-!IPTCPANEL_DESCRIPTION;Description
-!IPTCPANEL_DESCRIPTIONHINT;Enter a "caption" describing the who, what, and why of what is happening in this image, this might include names of people, and/or their role in the action that is taking place within the image.
-!IPTCPANEL_DESCRIPTIONWRITER;Description writer
-!IPTCPANEL_DESCRIPTIONWRITERHINT;Enter the name of the person involved in writing, editing or correcting the description of the image.
-!IPTCPANEL_HEADLINEHINT;Enter a brief publishable synopsis or summary of the contents of the image.
-!IPTCPANEL_INSTRUCTIONSHINT;Enter information about embargoes, or other restrictions not covered by the Copyright field.
-!IPTCPANEL_KEYWORDSHINT;Enter any number of keywords, terms or phrases used to express the subject matter in the image.
-!IPTCPANEL_PROVINCE;Province or state
-!IPTCPANEL_PROVINCEHINT;Enter the name of the province or state pictured in this image.
-!IPTCPANEL_SOURCEHINT;Enter or edit the name of a person or party who has a role in the content supply chain, such as a person or entity from whom you received this image from.
-!IPTCPANEL_SUPPCATEGORIES;Supplemental categories
-!IPTCPANEL_SUPPCATEGORIESHINT;Further refines the subject of the image.
-!IPTCPANEL_TITLEHINT;Enter a short verbal and human readable name for the image, this may be the file name.
-!IPTCPANEL_TRANSREFERENCE;Job ID
-!IPTCPANEL_TRANSREFERENCEHINT;Enter a number or identifier needed for workflow control or tracking.
-!MAIN_BUTTON_FULLSCREEN;Fullscreen
-!MAIN_BUTTON_ICCPROFCREATOR;ICC Profile Creator
-!MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4
-!MAIN_BUTTON_NAVPREV_TOOLTIP;Navigate to the previous image relative to image opened in the Editor.\nShortcut: Shift-F3\n\nTo navigate to the previous image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F3
-!MAIN_BUTTON_NAVSYNC_TOOLTIP;Synchronize the File Browser or Filmstrip with the Editor to reveal the thumbnail of the currently opened image, and clear any active filters.\nShortcut: x\n\nAs above, but without clearing active filters:\nShortcut: y\n(Note that the thumbnail of the opened image will not be shown if filtered out).
-!MAIN_BUTTON_PUTTOQUEUE_TOOLTIP;Put current image to processing queue.\nShortcut: Ctrl+b
-!MAIN_BUTTON_SAVE_TOOLTIP;Save current image.\nShortcut: Ctrl+s\nSave current profile (.pp3).\nShortcut: Ctrl+Shift+s
-!MAIN_BUTTON_SENDTOEDITOR_TOOLTIP;Edit current image in external editor.\nShortcut: Ctrl+e
-!MAIN_BUTTON_SHOWHIDESIDEPANELS_TOOLTIP;Show/hide all side panels.\nShortcut: m
-!MAIN_BUTTON_UNFULLSCREEN;Exit fullscreen
-!MAIN_FRAME_BATCHQUEUE_TOOLTIP;Processing queue.\nShortcut: Ctrl-F3
-!MAIN_FRAME_EDITOR;Editor
-!MAIN_FRAME_EDITOR_TOOLTIP;Editor.\nShortcut: Ctrl-F4
-!MAIN_FRAME_FILEBROWSER_TOOLTIP;File browser.\nShortcut: Ctrl-F2
-!MAIN_FRAME_PLACES_DEL;Remove
-!MAIN_MSG_EMPTYFILENAME;Filename unspecified!
-!MAIN_MSG_IMAGEUNPROCESSED;This command requires all selected images to be queue-processed first.
-!MAIN_MSG_NAVIGATOR;Navigator
-!MAIN_MSG_OPERATIONCANCELLED;Operation cancelled
-!MAIN_MSG_PATHDOESNTEXIST;The path\n\n%1\n\ndoes not exist. Please set a correct path in Preferences.
-!MAIN_MSG_SETPATHFIRST;You first have to set a target path in Preferences in order to use this function!
-!MAIN_MSG_TOOMANYOPENEDITORS;Too many open editors.\nPlease close an editor to continue.
-!MAIN_MSG_WRITEFAILED;Failed to write\n"%1"\n\nMake sure that the folder exists and that you have write permission to it.
-!MAIN_TAB_ADVANCED;Advanced
-!MAIN_TAB_ADVANCED_TOOLTIP;Shortcut: Alt-w
-!MAIN_TAB_COLOR_TOOLTIP;Shortcut: Alt-c
-!MAIN_TAB_DETAIL_TOOLTIP;Shortcut: Alt-d
-!MAIN_TAB_EXPORT; Fast Export
-!MAIN_TAB_EXPOSURE_TOOLTIP;Shortcut: Alt-e
-!MAIN_TAB_FAVORITES;Favorites
-!MAIN_TAB_FAVORITES_TOOLTIP;Shortcut: Alt-u
-!MAIN_TAB_INSPECT; Inspect
-!MAIN_TAB_METADATA_TOOLTIP;Shortcut: Alt-m
-!MAIN_TAB_RAW;Raw
-!MAIN_TAB_RAW_TOOLTIP;Shortcut: Alt-r
-!MAIN_TAB_TRANSFORM_TOOLTIP;Shortcut: Alt-t
-!MAIN_TOOLTIP_BACKCOLOR0;Background color of the preview: theme-based\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR1;Background color of the preview: black\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR2;Background color of the preview: white\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR3;Background color of the preview: middle grey\nShortcut: 9
-!MAIN_TOOLTIP_BEFOREAFTERLOCK;Lock / Unlock the Before view\n\nLock: keep the Before view unchanged.\nUseful to evaluate the cumulative effect of multiple tools.\nAdditionally, comparisons can be made to any state in the History.\n\nUnlock: the Before view will follow the After view one step behind, showing the image before the effect of the currently used tool.
-!MAIN_TOOLTIP_PREVIEWB;Preview the blue channel.\nShortcut: b
-!MAIN_TOOLTIP_PREVIEWFOCUSMASK;Preview the focus mask.\nShortcut: Shift-f\n\nMore accurate on images with shallow depth of field, low noise and at higher zoom levels.\nZoom out to 10-30% to improve detection accuracy on noisy images.
-!MAIN_TOOLTIP_PREVIEWG;Preview the green channel.\nShortcut: g
-!MAIN_TOOLTIP_PREVIEWL;Preview the luminosity.\nShortcut: v\n\n0.299*R + 0.587*G + 0.114*B
-!MAIN_TOOLTIP_PREVIEWR;Preview the red channel.\nShortcut: r
-!MAIN_TOOLTIP_PREVIEWSHARPMASK;Preview the sharpening contrast mask.\nShortcut: p\n\nOnly works when sharpening is enabled and zoom >= 100%.
-!MAIN_TOOLTIP_SHOWHIDELP1;Show/Hide the left panel.\nShortcut: l
-!MAIN_TOOLTIP_SHOWHIDERP1;Show/Hide the right panel.\nShortcut: Alt-l
-!MAIN_TOOLTIP_SHOWHIDETP1;Show/Hide the top panel.\nShortcut: Shift-l
-!MAIN_TOOLTIP_THRESHOLD;Threshold
-!MAIN_TOOLTIP_TOGGLE;Toggle the Before/After view.\nShortcut: Shift-b
-!MONITOR_PROFILE_SYSTEM;System default
-!NAVIGATOR_B;B:
-!NAVIGATOR_G;G:
-!NAVIGATOR_H;H:
-!NAVIGATOR_LAB_A;a*:
-!NAVIGATOR_LAB_B;b*:
-!NAVIGATOR_LAB_L;L*:
-!NAVIGATOR_NA; --
-!NAVIGATOR_R;R:
-!NAVIGATOR_S;S:
-!NAVIGATOR_V;V:
-!NAVIGATOR_XY_FULL;Width: %1, Height: %2
-!NAVIGATOR_XY_NA;x: --, y: --
-!OPTIONS_BUNDLED_MISSING;The bundled profile "%1" could not be found!\n\nYour installation could be damaged.\n\nDefault internal values will be used instead.
-!OPTIONS_DEFIMG_MISSING;The default profile for non-raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!OPTIONS_DEFRAW_MISSING;The default profile for raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!PARTIALPASTE_ADVANCEDGROUP;Advanced Settings
-!PARTIALPASTE_CHANNELMIXER;Channel mixer
-!PARTIALPASTE_CHANNELMIXERBW;Black-and-white
-!PARTIALPASTE_COLORAPP;CIECAM02
-!PARTIALPASTE_COLORTONING;Color toning
-!PARTIALPASTE_COMMONTRANSFORMPARAMS;Auto-fill
-!PARTIALPASTE_DARKFRAMEAUTOSELECT;Dark-frame auto-selection
-!PARTIALPASTE_DARKFRAMEFILE;Dark-frame file
-!PARTIALPASTE_DEFRINGE;Defringe
-!PARTIALPASTE_DEHAZE;Haze removal
-!PARTIALPASTE_DETAILGROUP;Detail Settings
-!PARTIALPASTE_DIRPYRDENOISE;Noise reduction
-!PARTIALPASTE_DIRPYREQUALIZER;Contrast by detail levels
-!PARTIALPASTE_EPD;Tone mapping
-!PARTIALPASTE_EQUALIZER;Wavelet levels
-!PARTIALPASTE_EVERYTHING;Everything
-!PARTIALPASTE_FILMSIMULATION;Film simulation
-!PARTIALPASTE_FLATFIELDAUTOSELECT;Flat-field auto-selection
-!PARTIALPASTE_FLATFIELDBLURRADIUS;Flat-field blur radius
-!PARTIALPASTE_FLATFIELDBLURTYPE;Flat-field blur type
-!PARTIALPASTE_FLATFIELDCLIPCONTROL;Flat-field clip control
-!PARTIALPASTE_FLATFIELDFILE;Flat-field file
-!PARTIALPASTE_GRADIENT;Graduated filter
-!PARTIALPASTE_HSVEQUALIZER;HSV equalizer
-!PARTIALPASTE_IMPULSEDENOISE;Impulse noise reduction
-!PARTIALPASTE_LABCURVE;L*a*b* adjustments
-!PARTIALPASTE_LENSPROFILE;Profiled lens correction
-!PARTIALPASTE_LOCALCONTRAST;Local contrast
-!PARTIALPASTE_METADATA;Metadata mode
-!PARTIALPASTE_PCVIGNETTE;Vignette filter
-!PARTIALPASTE_PERSPECTIVE;Perspective
-!PARTIALPASTE_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!PARTIALPASTE_PREPROCESS_GREENEQUIL;Green equilibration
-!PARTIALPASTE_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!PARTIALPASTE_PREPROCESS_LINEDENOISE;Line noise filter
-!PARTIALPASTE_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!PARTIALPASTE_PRSHARPENING;Post-resize sharpening
-!PARTIALPASTE_RAWCACORR_AUTO;CA auto-correction
-!PARTIALPASTE_RAWCACORR_AVOIDCOLORSHIFT;CA avoid color shift
-!PARTIALPASTE_RAWCACORR_CAREDBLUE;CA red & blue
-!PARTIALPASTE_RAWEXPOS_BLACK;Black levels
-!PARTIALPASTE_RAWEXPOS_LINEAR;White point correction
-!PARTIALPASTE_RAWGROUP;Raw Settings
-!PARTIALPASTE_RAW_BORDER;Raw border
-!PARTIALPASTE_RAW_DCBENHANCE;DCB enhancement
-!PARTIALPASTE_RAW_DCBITERATIONS;DCB iterations
-!PARTIALPASTE_RAW_DMETHOD;Demosaic method
-!PARTIALPASTE_RAW_FALSECOLOR;False color suppression
-!PARTIALPASTE_RAW_IMAGENUM;Sub-image
-!PARTIALPASTE_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!PARTIALPASTE_RAW_PIXELSHIFT;Pixel Shift
-!PARTIALPASTE_RETINEX;Retinex
-!PARTIALPASTE_RGBCURVES;RGB curves
-!PARTIALPASTE_SHARPENEDGE;Edges
-!PARTIALPASTE_SHARPENMICRO;Microcontrast
-!PARTIALPASTE_SOFTLIGHT;Soft light
-!PARTIALPASTE_TM_FATTAL;Dynamic range compression
-!PARTIALPASTE_VIBRANCE;Vibrance
-!PREFERENCES_ADD;Add
-!PREFERENCES_APPEARANCE;Appearance
-!PREFERENCES_APPEARANCE_COLORPICKERFONT;Color picker font
-!PREFERENCES_APPEARANCE_CROPMASKCOLOR;Crop mask color
-!PREFERENCES_APPEARANCE_MAINFONT;Main font
-!PREFERENCES_APPEARANCE_NAVGUIDECOLOR;Navigator guide color
-!PREFERENCES_APPEARANCE_THEME;Theme
-!PREFERENCES_AUTOMONPROFILE;Use operating system's main monitor color profile
-!PREFERENCES_AUTOSAVE_TP_OPEN;Save tool collapsed/expanded state on exit
-!PREFERENCES_BATCH_PROCESSING;Batch Processing
-!PREFERENCES_BEHADDALL;All to 'Add'
-!PREFERENCES_BEHADDALLHINT;Set all parameters to the Add mode.\nAdjustments of parameters in the batch tool panel will be deltas to the stored values.
-!PREFERENCES_BEHAVIOR;Behavior
-!PREFERENCES_BEHSETALL;All to 'Set'
-!PREFERENCES_BEHSETALLHINT;Set all parameters to the Set mode.\nAdjustments of parameters in the batch tool panel will be absolute, the actual values will be displayed.
-!PREFERENCES_BLACKBODY;Tungsten
-!PREFERENCES_CACHECLEAR;Clear
-!PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
-!PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
-!PREFERENCES_CACHECLEAR_ONLYPROFILES;Clear only cached processing profiles:
-!PREFERENCES_CACHECLEAR_SAFETY;Only files in the cache are cleared. Processing profiles stored alongside the source images are not touched.
-!PREFERENCES_CHUNKSIZES;Tiles per thread
-!PREFERENCES_CHUNKSIZE_RAW_AMAZE;AMaZE demosaic
-!PREFERENCES_CHUNKSIZE_RAW_CA;Raw CA correction
-!PREFERENCES_CHUNKSIZE_RAW_RCD;RCD demosaic
-!PREFERENCES_CHUNKSIZE_RAW_XT;Xtrans demosaic
-!PREFERENCES_CHUNKSIZE_RGB;RGB processing
-!PREFERENCES_CLUTSCACHE;HaldCLUT Cache
-!PREFERENCES_CLUTSCACHE_LABEL;Maximum number of cached CLUTs
-!PREFERENCES_CLUTSDIR;HaldCLUT directory
-!PREFERENCES_CMMBPC;Black point compensation
-!PREFERENCES_CROP;Crop Editing
-!PREFERENCES_CROP_AUTO_FIT;Automatically zoom to fit the crop
-!PREFERENCES_CROP_GUIDES;Guides shown when not editing the crop
-!PREFERENCES_CROP_GUIDES_FRAME;Frame
-!PREFERENCES_CROP_GUIDES_FULL;Original
-!PREFERENCES_CROP_GUIDES_NONE;None
-!PREFERENCES_CURVEBBOXPOS;Position of curve copy & paste buttons
-!PREFERENCES_CURVEBBOXPOS_ABOVE;Above
-!PREFERENCES_CURVEBBOXPOS_BELOW;Below
-!PREFERENCES_CURVEBBOXPOS_LEFT;Left
-!PREFERENCES_CURVEBBOXPOS_RIGHT;Right
-!PREFERENCES_CUSTPROFBUILD;Custom Processing Profile Builder
-!PREFERENCES_CUSTPROFBUILDHINT;Executable (or script) file called when a new initial processing profile should be generated for an image.\n\nThe path of the communication file (*.ini style, a.k.a. "Keyfile") is added as a command line parameter. It contains various parameters required for the scripts and image Exif to allow a rules-based processing profile generation.\n\nWARNING: You are responsible for using double quotes where necessary if you're using paths containing spaces.
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys format
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
-!PREFERENCES_CUSTPROFBUILDPATH;Executable path
-!PREFERENCES_D50;Settings in main menu
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_D55;5500K
-!PREFERENCES_D60;6000K
-!PREFERENCES_D65;6500K
-!PREFERENCES_DARKFRAMEFOUND;Found
-!PREFERENCES_DARKFRAMESHOTS;shots
-!PREFERENCES_DARKFRAMETEMPLATES;templates
-!PREFERENCES_DIRDARKFRAMES;Dark-frames directory
-!PREFERENCES_DIRECTORIES;Directories
-!PREFERENCES_EDITORCMDLINE;Custom command line
-!PREFERENCES_EDITORLAYOUT;Editor layout
-!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_FLATFIELDFOUND;Found
-!PREFERENCES_FLATFIELDSDIR;Flat-fields directory
-!PREFERENCES_FLATFIELDSHOTS;shots
-!PREFERENCES_FLATFIELDTEMPLATES;templates
-!PREFERENCES_FLUOF2;Fluorescent F2
-!PREFERENCES_FLUOF7;Fluorescent F7
-!PREFERENCES_FLUOF11;Fluorescent F11
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY;Output device's Yb luminance (%)
-!PREFERENCES_GREY05;Yb=05 CIE L#30
-!PREFERENCES_GREY10;Yb=10 CIE L#40
-!PREFERENCES_GREY15;Yb=15 CIE L#45
-!PREFERENCES_GREY18;Settings in main menu
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREY23;Yb=23 CIE L#55
-!PREFERENCES_GREY30;Yb=30 CIE L#60
-!PREFERENCES_GREY40;Yb=40 CIE L#70
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram in left panel
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
-!PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
-!PREFERENCES_INSPECT_LABEL;Inspect
-!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
-!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
-!PREFERENCES_INTERNALTHUMBIFUNTOUCHED;Show embedded JPEG thumbnail if raw is unedited
-!PREFERENCES_LANG;Language
-!PREFERENCES_LANGAUTODETECT;Use system language
-!PREFERENCES_MAXRECENTFOLDERS;Maximum number of recent folders
-!PREFERENCES_MENUGROUPEXTPROGS;Group "Open with"
-!PREFERENCES_MENUGROUPFILEOPERATIONS;Group "File operations"
-!PREFERENCES_MENUGROUPLABEL;Group "Color label"
-!PREFERENCES_MENUGROUPPROFILEOPERATIONS;Group "Processing profile operations"
-!PREFERENCES_MENUGROUPRANK;Group "Rank"
-!PREFERENCES_MENUOPTIONS;Context Menu Options
-!PREFERENCES_METADATA;Metadata
-!PREFERENCES_MONINTENT;Default rendering intent
-!PREFERENCES_MONITOR;Monitor
-!PREFERENCES_MONPROFILE;Default color profile
-!PREFERENCES_MONPROFILE_WARNOSX;Due to MacOS limitations, only sRGB is supported.
-!PREFERENCES_MULTITAB;Multiple Editor Tabs Mode
-!PREFERENCES_MULTITABDUALMON;Multiple Editor Tabs In Own Window Mode
-!PREFERENCES_NAVIGATIONFRAME;Navigation
-!PREFERENCES_OVERLAY_FILENAMES;Overlay filenames on thumbnails in the file browser
-!PREFERENCES_OVERLAY_FILENAMES_FILMSTRIP;Overlay filenames on thumbnails in the editor pannel
-!PREFERENCES_OVERWRITEOUTPUTFILE;Overwrite existing output files
-!PREFERENCES_PANFACTORLABEL;Pan rate amplification
-!PREFERENCES_PARSEDEXTDOWNHINT;Move selected extension down in the list.
-!PREFERENCES_PARSEDEXTUPHINT;Move selected extension up in the list.
-!PREFERENCES_PERFORMANCE_MEASURE;Measure
-!PREFERENCES_PERFORMANCE_MEASURE_HINT;Logs processing times in console
-!PREFERENCES_PERFORMANCE_THREADS;Threads
-!PREFERENCES_PERFORMANCE_THREADS_LABEL;Maximum number of threads for Noise Reduction and Wavelet Levels (0 = Automatic)
-!PREFERENCES_PREVDEMO;Preview Demosaic Method
-!PREFERENCES_PREVDEMO_FAST;Fast
-!PREFERENCES_PREVDEMO_LABEL;Demosaicing method used for the preview at <100% zoom:
-!PREFERENCES_PREVDEMO_SIDECAR;As in PP3
-!PREFERENCES_PRINTER;Printer (Soft-Proofing)
-!PREFERENCES_PROFILESAVEBOTH;Save processing profile both to the cache and next to the input file
-!PREFERENCES_PROFILESAVELOCATION;Processing profile saving location
-!PREFERENCES_PROFILE_NONE;None
-!PREFERENCES_PROPERTY;Property
-!PREFERENCES_PRTINTENT;Rendering intent
-!PREFERENCES_PRTPROFILE;Color profile
-!PREFERENCES_REMEMBERZOOMPAN;Remember zoom % and pan offset
-!PREFERENCES_REMEMBERZOOMPAN_TOOLTIP;Remember the zoom % and pan offset of the current image when opening a new image.\n\nThis option only works in "Single Editor Tab Mode" and when "Demosaicing method used for the preview at <100% zoom" is set to "As in PP3".
-!PREFERENCES_SAVE_TP_OPEN_NOW;Save tool collapsed/expanded state now
-!PREFERENCES_SERIALIZE_TIFF_READ;TIFF Read Settings
-!PREFERENCES_SERIALIZE_TIFF_READ_LABEL;Serialize reading of TIFF files
-!PREFERENCES_SERIALIZE_TIFF_READ_TOOLTIP;Enabling this option when working with folders containing uncompressed TIFF files can increase performance of thumbnail generation.
-!PREFERENCES_SET;Set
-!PREFERENCES_SHOWEXPOSURECOMPENSATION;Append exposure compensation
-!PREFERENCES_SHOWFILMSTRIPTOOLBAR;Show Filmstrip toolbar
-!PREFERENCES_SINGLETAB;Single Editor Tab Mode
-!PREFERENCES_SINGLETABVERTAB;Single Editor Tab Mode, Vertical Tabs
-!PREFERENCES_SND_BATCHQUEUEDONE;Queue processing done
-!PREFERENCES_SND_HELP;Enter a full file path to set a sound, or leave blank for no sound.\nFor system sounds on Windows use "SystemDefault", "SystemAsterisk" etc., and on Linux use "complete", "window-attention" etc.
-!PREFERENCES_SND_LNGEDITPROCDONE;Editor processing done
-!PREFERENCES_SND_THRESHOLDSECS;After seconds
-!PREFERENCES_TAB_DYNAMICPROFILE;Dynamic Profile Rules
-!PREFERENCES_TAB_PERFORMANCE;Performance
-!PREFERENCES_TAB_SOUND;Sounds
-!PREFERENCES_THUMBNAIL_INSPECTOR_JPEG;Embedded JPEG preview
-!PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TP_LABEL;Tool panel:
-!PREFERENCES_TP_VSCROLLBAR;Hide vertical scrollbar
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
-!PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-!PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
-!PREFERENCES_WORKFLOW;Layout
-!PROFILEPANEL_COPYPPASTE;Parameters to copy
-!PROFILEPANEL_GLOBALPROFILES;Bundled profiles
-!PROFILEPANEL_LOADPPASTE;Parameters to load
-!PROFILEPANEL_MODE_TIP;Processing profile fill mode.\n\nButton pressed: partial profiles will be converted to full profiles; the missing values will be replaced with hard-coded defaults.\n\nButton released: profiles will be applied as they are, altering only those values which they contain.
-!PROFILEPANEL_MYPROFILES;My profiles
-!PROFILEPANEL_PASTEPPASTE;Parameters to paste
-!PROFILEPANEL_PDYNAMIC;Dynamic
-!PROFILEPANEL_PINTERNAL;Neutral
-!PROFILEPANEL_SAVEPPASTE;Parameters to save
-!PROGRESSBAR_DECODING;Decoding...
-!PROGRESSBAR_GREENEQUIL;Green equilibration...
-!PROGRESSBAR_HLREC;Highlight reconstruction...
-!PROGRESSBAR_HOTDEADPIXELFILTER;Hot/dead pixel filter...
-!PROGRESSBAR_LINEDENOISE;Line noise filter...
-!PROGRESSBAR_LOADINGTHUMBS;Loading thumbnails...
-!PROGRESSBAR_NOIMAGES;No images found
-!PROGRESSBAR_PROCESSING_PROFILESAVED;Processing profile saved
-!PROGRESSBAR_RAWCACORR;Raw CA correction...
-!PROGRESSBAR_SNAPSHOT_ADDED;Snapshot added
-!PROGRESSDLG_PROFILECHANGEDINBROWSER;Processing profile changed in browser
-!QINFO_FRAMECOUNT;%2 frames
-!QINFO_HDR;HDR / %2 frame(s)
-!QINFO_PIXELSHIFT;Pixel Shift / %2 frame(s)
-!SAMPLEFORMAT_0;Unknown data format
-!SAMPLEFORMAT_1;8-bit unsigned
-!SAMPLEFORMAT_2;16-bit unsigned
-!SAMPLEFORMAT_4;24-bit LogLuv
-!SAMPLEFORMAT_8;32-bit LogLuv
-!SAMPLEFORMAT_16;16-bit floating-point
-!SAMPLEFORMAT_32;24-bit floating-point
-!SAMPLEFORMAT_64;32-bit floating-point
-!SAVEDLG_AUTOSUFFIX;Automatically add a suffix if the file already exists
-!SAVEDLG_FILEFORMAT_FLOAT; floating-point
-!SAVEDLG_FORCEFORMATOPTS;Force saving options
-!SAVEDLG_SUBSAMP;Subsampling
-!SAVEDLG_SUBSAMP_1;Best compression
-!SAVEDLG_SUBSAMP_2;Balanced
-!SAVEDLG_SUBSAMP_3;Best quality
-!SAVEDLG_SUBSAMP_TOOLTIP;Best compression:\nJ:a:b 4:2:0\nh/v 2/2\nChroma halved horizontally and vertically.\n\nBalanced:\nJ:a:b 4:2:2\nh/v 2/1\nChroma halved horizontally.\n\nBest quality:\nJ:a:b 4:4:4\nh/v 1/1\nNo chroma subsampling.
-!SAVEDLG_TIFFUNCOMPRESSED;Uncompressed TIFF
-!SAVEDLG_WARNFILENAME;File will be named
-!SHCSELECTOR_TOOLTIP;Click right mouse button to reset the position of those 3 sliders.
-!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
-!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!THRESHOLDSELECTOR_B;Bottom
-!THRESHOLDSELECTOR_BL;Bottom-left
-!THRESHOLDSELECTOR_BR;Bottom-right
-!THRESHOLDSELECTOR_HINT;Hold the Shift key to move individual control points.
-!THRESHOLDSELECTOR_T;Top
-!THRESHOLDSELECTOR_TL;Top-left
-!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
-!TP_BWMIX_ALGO;Algorithm OYCPM
-!TP_BWMIX_ALGO_LI;Linear
-!TP_BWMIX_ALGO_SP;Special effects
-!TP_BWMIX_ALGO_TOOLTIP;Linear: will produce a normal linear response.\nSpecial effects: will produce special effects by mixing channels non-linearly.
-!TP_BWMIX_AUTOCH;Auto
-!TP_BWMIX_CC_ENABLED;Adjust complementary color
-!TP_BWMIX_CC_TOOLTIP;Enable to allow automatic adjustment of complementary colors in ROYGCBPM mode.
-!TP_BWMIX_CHANNEL;Luminance equalizer
-!TP_BWMIX_CURVEEDITOR1;'Before' curve
-!TP_BWMIX_CURVEEDITOR2;'After' curve
-!TP_BWMIX_CURVEEDITOR_AFTER_TOOLTIP;Tone curve, after B&W conversion, at the end of treatment.
-!TP_BWMIX_CURVEEDITOR_BEFORE_TOOLTIP;Tone curve, just before B&W conversion.\nMay take into account the color components.
-!TP_BWMIX_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H).\nPay attention to extreme values as they may cause artifacts.
-!TP_BWMIX_FILTER;Color Filter
-!TP_BWMIX_FILTER_BLUE;Blue
-!TP_BWMIX_FILTER_BLUEGREEN;Blue-Green
-!TP_BWMIX_FILTER_GREEN;Green
-!TP_BWMIX_FILTER_GREENYELLOW;Green-Yellow
-!TP_BWMIX_FILTER_NONE;None
-!TP_BWMIX_FILTER_PURPLE;Purple
-!TP_BWMIX_FILTER_RED;Red
-!TP_BWMIX_FILTER_REDYELLOW;Red-Yellow
-!TP_BWMIX_FILTER_TOOLTIP;The color filter simulates shots taken with a colored filter placed in front of the lens. Colored filters reduce the transmission of specific color ranges and therefore affect their lightness. E.g. a red filter darkens blue skies.
-!TP_BWMIX_FILTER_YELLOW;Yellow
-!TP_BWMIX_GAMMA;Gamma Correction
-!TP_BWMIX_GAM_TOOLTIP;Correct gamma for each RGB channel.
-!TP_BWMIX_LABEL;Black-and-White
-!TP_BWMIX_MET;Method
-!TP_BWMIX_MET_CHANMIX;Channel Mixer
-!TP_BWMIX_MET_DESAT;Desaturation
-!TP_BWMIX_MET_LUMEQUAL;Luminance Equalizer
-!TP_BWMIX_MIXC;Channel Mixer
-!TP_BWMIX_NEUTRAL;Reset
-!TP_BWMIX_RGBLABEL;R: %1%% G: %2%% B: %3%% Total: %4%%
-!TP_BWMIX_RGBLABEL_HINT;Final RGB factors that take care of all the mixer options.\n"Total" displays the sum of the RGB values:\n- always 100% in relative mode\n- higher (lighter) or lower (darker) than 100% in absolute mode.
-!TP_BWMIX_RGB_TOOLTIP;Mix the RGB channels. Use presets for guidance.\nPay attention to negative values that may cause artifacts or erratic behavior.
-!TP_BWMIX_SETTING;Presets
-!TP_BWMIX_SETTING_TOOLTIP;Different presets (film, landscape, etc.) or manual Channel Mixer settings.
-!TP_BWMIX_SET_HIGHCONTAST;High contrast
-!TP_BWMIX_SET_HIGHSENSIT;High Sensitivity
-!TP_BWMIX_SET_HYPERPANCHRO;Hyper Panchromatic
-!TP_BWMIX_SET_INFRARED;Infrared
-!TP_BWMIX_SET_LANDSCAPE;Landscape
-!TP_BWMIX_SET_LOWSENSIT;Low Sensitivity
-!TP_BWMIX_SET_LUMINANCE;Luminance
-!TP_BWMIX_SET_NORMCONTAST;Normal Contrast
-!TP_BWMIX_SET_ORTHOCHRO;Orthochromatic
-!TP_BWMIX_SET_PANCHRO;Panchromatic
-!TP_BWMIX_SET_PORTRAIT;Portrait
-!TP_BWMIX_SET_RGBABS;Absolute RGB
-!TP_BWMIX_SET_RGBREL;Relative RGB
-!TP_BWMIX_SET_ROYGCBPMABS;Absolute ROYGCBPM
-!TP_BWMIX_SET_ROYGCBPMREL;Relative ROYGCBPM
-!TP_BWMIX_TCMODE_FILMLIKE;B&W Film-like
-!TP_BWMIX_TCMODE_SATANDVALBLENDING;B&W Saturation and Value Blending
-!TP_BWMIX_TCMODE_STANDARD;B&W Standard
-!TP_BWMIX_TCMODE_WEIGHTEDSTD;B&W Weighted Standard
-!TP_BWMIX_VAL;L
-!TP_CBDL_AFT;After Black-and-White
-!TP_CBDL_BEF;Before Black-and-White
-!TP_CBDL_METHOD;Process located
-!TP_CBDL_METHOD_TOOLTIP;Choose whether the Contrast by Detail Levels tool is to be positioned after the Black-and-White tool, which makes it work in L*a*b* space, or before it, which makes it work in RGB space.
-!TP_CHROMATABERR_LABEL;Chromatic Aberration
-!TP_COLORAPP_ABSOLUTELUMINANCE;Absolute luminance
-!TP_COLORAPP_ALGO;Algorithm
-!TP_COLORAPP_ALGO_ALL;All
-!TP_COLORAPP_ALGO_JC;Lightness + Chroma (JC)
-!TP_COLORAPP_ALGO_JS;Lightness + Saturation (JS)
-!TP_COLORAPP_ALGO_QM;Brightness + Colorfulness (QM)
-!TP_COLORAPP_ALGO_TOOLTIP;Lets you choose between parameter subsets or all parameters.
-!TP_COLORAPP_BADPIXSL;Hot/bad pixel filter
-!TP_COLORAPP_BADPIXSL_TOOLTIP;Suppression of hot/bad (brightly colored) pixels.\n0 = No effect\n1 = Median\n2 = Gaussian.\nAlternatively, adjust the image to avoid very dark shadows.\n\nThese artifacts are due to limitations of CIECAM02.
-!TP_COLORAPP_BRIGHT;Brightness (Q)
-!TP_COLORAPP_BRIGHT_TOOLTIP;Brightness in CIECAM02 takes into account the white's luminosity and differs from L*a*b* and RGB brightness.
-!TP_COLORAPP_CAT02ADAPTATION_TOOLTIP;When setting manually, values above 65 are recommended.
-!TP_COLORAPP_CHROMA;Chroma (C)
-!TP_COLORAPP_CHROMA_M;Colorfulness (M)
-!TP_COLORAPP_CHROMA_M_TOOLTIP;Colorfulness in CIECAM02 differs from L*a*b* and RGB colorfulness.
-!TP_COLORAPP_CHROMA_S;Saturation (S)
-!TP_COLORAPP_CHROMA_S_TOOLTIP;Saturation in CIECAM02 differs from L*a*b* and RGB saturation.
-!TP_COLORAPP_CHROMA_TOOLTIP;Chroma in CIECAM02 differs from L*a*b* and RGB chroma.
-!TP_COLORAPP_CIECAT_DEGREE;CAT02 adaptation
-!TP_COLORAPP_CONTRAST;Contrast (J)
-!TP_COLORAPP_CONTRAST_Q;Contrast (Q)
-!TP_COLORAPP_CONTRAST_Q_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CONTRAST_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CURVEEDITOR1;Tone curve 1
-!TP_COLORAPP_CURVEEDITOR1_TOOLTIP;Shows the histogram of L* (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of J or Q after CIECAM02.\n\nJ and Q are not shown in the main histogram panel.\n\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_CURVEEDITOR2;Tone curve 2
-!TP_COLORAPP_CURVEEDITOR2_TOOLTIP;Same usage as with the second exposure tone curve.
-!TP_COLORAPP_CURVEEDITOR3;Color curve
-!TP_COLORAPP_CURVEEDITOR3_TOOLTIP;Adjust either chroma, saturation or colorfulness.\n\nShows the histogram of chromaticity (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of C, s or M after CIECAM02.\n\nC, s and M are not shown in the main histogram panel.\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_DATACIE;CIECAM02 output histograms in curves
-!TP_COLORAPP_DATACIE_TOOLTIP;When enabled, histograms in CIECAM02 curves show approximate values/ranges for J or Q, and C, s or M after the CIECAM02 adjustments.\nThis selection does not impact the main histogram panel.\n\nWhen disabled, histograms in CIECAM02 curves show L*a*b* values before CIECAM02 adjustments.
-!TP_COLORAPP_FREE;Free temp+green + CAT02 + [output]
-!TP_COLORAPP_GAMUT;Gamut control (L*a*b*)
-!TP_COLORAPP_GAMUT_TOOLTIP;Allow gamut control in L*a*b* mode.
-!TP_COLORAPP_HUE;Hue (h)
-!TP_COLORAPP_HUE_TOOLTIP;Hue (h) - angle between 0° and 360°.
-!TP_COLORAPP_LABEL;CIE Color Appearance Model 2002
-!TP_COLORAPP_LABEL_CAM02;Image Adjustments
-!TP_COLORAPP_LABEL_SCENE;Scene Conditions
-!TP_COLORAPP_LABEL_VIEWING;Viewing Conditions
-!TP_COLORAPP_LIGHT;Lightness (J)
-!TP_COLORAPP_LIGHT_TOOLTIP;Lightness in CIECAM02 differs from L*a*b* and RGB lightness.
-!TP_COLORAPP_MEANLUMINANCE;Mean luminance (Yb%)
-!TP_COLORAPP_MODEL;WP Model
-!TP_COLORAPP_MODEL_TOOLTIP;White-Point Model.\n\nWB [RT] + [output]: RT's white balance is used for the scene, CIECAM02 is set to D50, and the output device's white balance is set in Viewing Conditions.\n\nWB [RT+CAT02] + [output]: RT's white balance settings are used by CAT02 and the output device's white balance is set in Viewing Conditions.\n\nFree temp+green + CAT02 + [output]: temp and green are selected by the user, the output device's white balance is set in Viewing Conditions.
-!TP_COLORAPP_NEUTRAL;Reset
-!TP_COLORAPP_NEUTRAL_TIP;Reset all sliders checkbox and curves to their default values
-!TP_COLORAPP_RSTPRO;Red & skin-tones protection
-!TP_COLORAPP_RSTPRO_TOOLTIP;Red & skin-tones protection affects both sliders and curves.
-!TP_COLORAPP_SURROUND;Surround
-!TP_COLORAPP_SURROUND_AVER;Average
-!TP_COLORAPP_SURROUND_DARK;Dark
-!TP_COLORAPP_SURROUND_DIM;Dim
-!TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
-!TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\nAverage: Average light environment (standard). The image will not change.\n\nDim: Dim environment (TV). The image will become slighty dark.\n\nDark: Dark environment (projector). The image will become more dark.\n\nExtremly Dark: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
-!TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
-!TP_COLORAPP_TCMODE_CHROMA;Chroma
-!TP_COLORAPP_TCMODE_COLORF;Colorfulness
-!TP_COLORAPP_TCMODE_LABEL1;Curve mode 1
-!TP_COLORAPP_TCMODE_LABEL2;Curve mode 2
-!TP_COLORAPP_TCMODE_LABEL3;Curve chroma mode
-!TP_COLORAPP_TCMODE_LIGHTNESS;Lightness
-!TP_COLORAPP_TCMODE_SATUR;Saturation
-!TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD50 temp=5003\nD55 temp=5503\nD65 temp=6504\nD75 temp=7504
-!TP_COLORAPP_TONECIE;Tone mapping using CIECAM02
-!TP_COLORAPP_TONECIE_TOOLTIP;If this option is disabled, tone mapping is done in L*a*b* space.\nIf this option is enabled, tone mapping is done using CIECAM02.\nThe Tone Mapping tool must be enabled for this setting to take effect.
-!TP_COLORAPP_VIEWING_ABSOLUTELUMINANCE_TOOLTIP;Absolute luminance of the viewing environment\n(usually 16 cd/m²).
-!TP_COLORAPP_WBCAM;WB [RT+CAT02] + [output]
-!TP_COLORAPP_WBRT;WB [RT] + [output]
-!TP_COLORTONING_AB;o C/L
-!TP_COLORTONING_AUTOSAT;Automatic
-!TP_COLORTONING_BALANCE;Balance
-!TP_COLORTONING_BY;o C/L
-!TP_COLORTONING_CHROMAC;Opacity
-!TP_COLORTONING_COLOR;Color
-!TP_COLORTONING_CURVEEDITOR_CL_TOOLTIP;Chroma opacity as a function of luminance oC=f(L)
-!TP_COLORTONING_HIGHLIGHT;Highlights
-!TP_COLORTONING_HUE;Hue
-!TP_COLORTONING_LAB;L*a*b* blending
-!TP_COLORTONING_LABEL;Color Toning
-!TP_COLORTONING_LABGRID;L*a*b* color correction grid
-!TP_COLORTONING_LABGRID_VALUES;HL: a=%1 b=%2\nS: a=%3 b=%4
-!TP_COLORTONING_LABREGIONS;Color correction regions
-!TP_COLORTONING_LABREGION_ABVALUES;a=%1 b=%2
-!TP_COLORTONING_LABREGION_CHANNEL;Channel
-!TP_COLORTONING_LABREGION_CHANNEL_ALL;All
-!TP_COLORTONING_LABREGION_CHANNEL_B;Blue
-!TP_COLORTONING_LABREGION_CHANNEL_G;Green
-!TP_COLORTONING_LABREGION_CHANNEL_R;Red
-!TP_COLORTONING_LABREGION_CHROMATICITYMASK;C
-!TP_COLORTONING_LABREGION_HUEMASK;H
-!TP_COLORTONING_LABREGION_LIGHTNESS;Lightness
-!TP_COLORTONING_LABREGION_LIGHTNESSMASK;L
-!TP_COLORTONING_LABREGION_LIST_TITLE;Correction
-!TP_COLORTONING_LABREGION_MASK;Mask
-!TP_COLORTONING_LABREGION_MASKBLUR;Mask Blur
-!TP_COLORTONING_LABREGION_OFFSET;Offset
-!TP_COLORTONING_LABREGION_POWER;Power
-!TP_COLORTONING_LABREGION_SATURATION;Saturation
-!TP_COLORTONING_LABREGION_SHOWMASK;Show mask
-!TP_COLORTONING_LABREGION_SLOPE;Slope
-!TP_COLORTONING_LUMA;Luminance
-!TP_COLORTONING_LUMAMODE;Preserve luminance
-!TP_COLORTONING_LUMAMODE_TOOLTIP;If enabled, when you change color (red, green, cyan, blue, etc.) the luminance of each pixel is preserved.
-!TP_COLORTONING_METHOD;Method
-!TP_COLORTONING_METHOD_TOOLTIP;"L*a*b* blending", "RGB sliders" and "RGB curves" use interpolated color blending.\n"Color balance (Shadows/Midtones/Highlights)" and "Saturation 2 colors" use direct colors.\n\nThe Black-and-White tool can be enabled when using any color toning method, which allows for color toning.
-!TP_COLORTONING_MIDTONES;Midtones
-!TP_COLORTONING_NEUTRAL;Reset sliders
-!TP_COLORTONING_NEUTRAL_TIP;Reset all values (Shadows, Midtones, Highlights) to default.
-!TP_COLORTONING_OPACITY;Opacity
-!TP_COLORTONING_RGBCURVES;RGB - Curves
-!TP_COLORTONING_RGBSLIDERS;RGB - Sliders
-!TP_COLORTONING_SA;Saturation Protection
-!TP_COLORTONING_SATURATEDOPACITY;Strength
-!TP_COLORTONING_SATURATIONTHRESHOLD;Threshold
-!TP_COLORTONING_SHADOWS;Shadows
-!TP_COLORTONING_SPLITCO;Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITCOCO;Color Balance Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITLR;Saturation 2 colors
-!TP_COLORTONING_STR;Strength
-!TP_COLORTONING_STRENGTH;Strength
-!TP_COLORTONING_TWO2;Special chroma '2 colors'
-!TP_COLORTONING_TWOALL;Special chroma
-!TP_COLORTONING_TWOBY;Special a* and b*
-!TP_COLORTONING_TWOCOLOR_TOOLTIP;Standard chroma:\nLinear response, a* = b*.\n\nSpecial chroma:\nLinear response, a* = b*, but unbound - try under the diagonal.\n\nSpecial a* and b*:\nLinear response unbound with separate curves for a* and b*. Intended for special effects.\n\nSpecial chroma 2 colors:\nMore predictable.
-!TP_COLORTONING_TWOSTD;Standard chroma
-!TP_CROP_GTEPASSPORT;Biometric Passport
-!TP_CROP_GTFRAME;Frame
-!TP_CROP_GTGRID;Grid
-!TP_CROP_GTHARMMEANS;Harmonic Means
-!TP_CROP_GTTRIANGLE1;Golden Triangles 1
-!TP_CROP_GTTRIANGLE2;Golden Triangles 2
-!TP_CROP_PPI;PPI
-!TP_CROP_RESETCROP;Reset
-!TP_CROP_SELECTCROP;Select
-!TP_DARKFRAME_AUTOSELECT;Auto-selection
-!TP_DARKFRAME_LABEL;Dark-Frame
-!TP_DEFRINGE_LABEL;Defringe
-!TP_DEFRINGE_RADIUS;Radius
-!TP_DEFRINGE_THRESHOLD;Threshold
-!TP_DEHAZE_DEPTH;Depth
-!TP_DEHAZE_LABEL;Haze Removal
-!TP_DEHAZE_SHOW_DEPTH_MAP;Show depth map
-!TP_DEHAZE_STRENGTH;Strength
-!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
-!TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
-!TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominance
-!TP_DIRPYRDENOISE_CHROMINANCE_MANUAL;Manual
-!TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Chrominance - Master
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD;Method
-!TP_DIRPYRDENOISE_CHROMINANCE_METHODADVANCED_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nAutomatic multi-zones\nNo preview - works only during saving, but using the "Preview" method by matching the tile size and center to the preview size and center you can get an idea of the expected results.\nThe image is divided into tiles (about 10 to 70 depending on image size) and each tile receives its own chrominance noise reduction settings.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_PMZ;Preview multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW;Preview
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEWRESIDUAL_INFO_TOOLTIP;Displays the remaining noise levels of the part of the image visible in the preview after wavelet.\n\n>300 Very noisy\n100-300 Noisy\n50-100 A little noisy\n<50 Very low noise\n\nBeware, the values will differ between RGB and L*a*b* mode. The RGB values are less accurate because the RGB mode does not completely separate luminance and chrominance.
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_INFO;Preview size=%1, Center: Px=%2 Py=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Preview noise: Mean=%1 High=%2
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= - High= -
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2 Ty=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
-!TP_DIRPYRDENOISE_LABEL;Noise Reduction
-!TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
-!TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
-!TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Detail recovery
-!TP_DIRPYRDENOISE_LUMINANCE_FRAME;Luminance
-!TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminance
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE;Color space
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;For raw images either RGB or L*a*b* methods can be used.\n\nFor non-raw images the L*a*b* method will be used, regardless of the selection.
-!TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
-!TP_DIRPYRDENOISE_MAIN_GAMMA_TOOLTIP;Gamma varies noise reduction strength across the range of tones. Smaller values will target shadows, while larger values will stretch the effect to the brighter tones.
-!TP_DIRPYRDENOISE_MAIN_MODE;Mode
-!TP_DIRPYRDENOISE_MAIN_MODE_AGGRESSIVE;Aggressive
-!TP_DIRPYRDENOISE_MAIN_MODE_CONSERVATIVE;Conservative
-!TP_DIRPYRDENOISE_MAIN_MODE_TOOLTIP;"Conservative" preserves low frequency chroma patterns, while "aggressive" obliterates them.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD;Median method
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_CHROMINANCE;Chroma only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LABEL;Median Filter
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LUMINANCE;Luminance only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_RGB;RGB
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_TOOLTIP;When using the "Luminance only" and "L*a*b*" methods, median filtering will be performed just after the wavelet step in the noise reduction pipeline.\nWhen using the "RGB" mode, it will be performed at the very end of the noise reduction pipeline.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_WEIGHTED;Weighted L* (little) + a*b* (normal)
-!TP_DIRPYRDENOISE_MEDIAN_PASSES;Median iterations
-!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
-!TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
-!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
-!TP_DIRPYRDENOISE_TYPE_3X3;3×3
-!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
-!TP_DIRPYRDENOISE_TYPE_5X5;5×5
-!TP_DIRPYRDENOISE_TYPE_5X5SOFT;5×5 soft
-!TP_DIRPYRDENOISE_TYPE_7X7;7×7
-!TP_DIRPYRDENOISE_TYPE_9X9;9×9
-!TP_DIRPYREQUALIZER_ALGO;Skin Color Range
-!TP_DIRPYREQUALIZER_ALGO_TOOLTIP;Fine: closer to the colors of the skin, minimizing the action on other colors\nLarge: avoid more artifacts.
-!TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts
-!TP_DIRPYREQUALIZER_HUESKIN;Skin hue
-!TP_DIRPYREQUALIZER_HUESKIN_TOOLTIP;This pyramid is for the upper part, so far as the algorithm at its maximum efficiency.\nTo the lower part, the transition zones.\nIf you need to move the area significantly to the left or right - or if there are artifacts: the white balance is incorrect\nYou can slightly reduce the zone to prevent the rest of the image is affected.
-!TP_DIRPYREQUALIZER_LABEL;Contrast by Detail Levels
-!TP_DIRPYREQUALIZER_LUMACOARSEST;Coarsest
-!TP_DIRPYREQUALIZER_LUMACONTRAST_MINUS;Contrast -
-!TP_DIRPYREQUALIZER_LUMACONTRAST_PLUS;Contrast +
-!TP_DIRPYREQUALIZER_LUMAFINEST;Finest
-!TP_DIRPYREQUALIZER_LUMANEUTRAL;Neutral
-!TP_DIRPYREQUALIZER_SKIN;Skin targetting/protection
-!TP_DIRPYREQUALIZER_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_DIRPYREQUALIZER_THRESHOLD;Threshold
-!TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image.
-!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
-!TP_EPD_EDGESTOPPING;Edge stopping
-!TP_EPD_GAMMA;Gamma
-!TP_EPD_LABEL;Tone Mapping
-!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
-!TP_EPD_SCALE;Scale
-!TP_EPD_STRENGTH;Strength
-!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
-!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
-!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
-!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
-!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
-!TP_EXPOSURE_CURVEEDITOR2;Tone curve 2
-!TP_EXPOSURE_CURVEEDITOR2_TOOLTIP;Please refer to the "Exposure > Tone Curves" RawPedia article to learn how to achieve the best results by using two tone curves.
-!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
-!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
-!TP_EXPOSURE_SATURATION;Saturation
-!TP_EXPOSURE_TCMODE_FILMLIKE;Film-like
-!TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1
-!TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2
-!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
-!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual
-!TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending
-!TP_EXPOSURE_TCMODE_STANDARD;Standard
-!TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard
-!TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points
-!TP_EXPOS_WHITEPOINT_LABEL;Raw White Points
-!TP_FILMSIMULATION_LABEL;Film Simulation
-!TP_FILMSIMULATION_SLOWPARSEDIR;RawTherapee is configured to look for Hald CLUT images, which are used for the Film Simulation tool, in a folder which is taking too long to load.\nGo to Preferences > Image Processing > Film Simulation\nto see which folder is being used. You should either point RawTherapee to a folder which contains only Hald CLUT images and nothing more, or to an empty folder if you don't want to use the Film Simulation tool.\n\nRead the Film Simulation article in RawPedia for more information.\n\nDo you want to cancel the scan now?
-!TP_FILMSIMULATION_STRENGTH;Strength
-!TP_FILMSIMULATION_ZEROCLUTSFOUND;Set HaldCLUT directory in Preferences
-!TP_FLATFIELD_AUTOSELECT;Auto-selection
-!TP_FLATFIELD_BLURRADIUS;Blur radius
-!TP_FLATFIELD_BLURTYPE;Blur type
-!TP_FLATFIELD_BT_AREA;Area
-!TP_FLATFIELD_BT_HORIZONTAL;Horizontal
-!TP_FLATFIELD_BT_VERTHORIZ;Vertical + Horizontal
-!TP_FLATFIELD_BT_VERTICAL;Vertical
-!TP_FLATFIELD_CLIPCONTROL;Clip control
-!TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Clip control avoids clipped highlights caused by applying the flat field. If there are already clipped highlights before applying the flat field, clip control can lead to color cast.
-!TP_FLATFIELD_LABEL;Flat-Field
-!TP_GENERAL_11SCALE_TOOLTIP;The effects of this tool are only visible or only accurate at a preview scale of 1:1.
-!TP_GRADIENT_CENTER;Center
-!TP_GRADIENT_CENTER_X;Center X
-!TP_GRADIENT_CENTER_X_TOOLTIP;Shift gradient to the left (negative values) or right (positive values).
-!TP_GRADIENT_CENTER_Y;Center Y
-!TP_GRADIENT_CENTER_Y_TOOLTIP;Shift gradient up (negative values) or down (positive values).
-!TP_GRADIENT_DEGREE;Angle
-!TP_GRADIENT_DEGREE_TOOLTIP;Rotation angle in degrees.
-!TP_GRADIENT_FEATHER;Feather
-!TP_GRADIENT_FEATHER_TOOLTIP;Gradient width in percent of the image diagonal.
-!TP_GRADIENT_LABEL;Graduated Filter
-!TP_GRADIENT_STRENGTH;Strength
-!TP_GRADIENT_STRENGTH_TOOLTIP;Filter strength in stops.
-!TP_HLREC_BLEND;Blend
-!TP_HLREC_ENA_TOOLTIP;Could be activated by Auto Levels.
-!TP_HSVEQUALIZER_CHANNEL;Channel
-!TP_HSVEQUALIZER_HUE;H
-!TP_HSVEQUALIZER_LABEL;HSV Equalizer
-!TP_HSVEQUALIZER_SAT;S
-!TP_HSVEQUALIZER_VAL;V
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Baseline exposure
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET_TOOLTIP;Employ the embedded DCP baseline exposure offset. The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYHUESATMAP;Base table
-!TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYLOOKTABLE;Look table
-!TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-!TP_ICM_BLENDCMSMATRIX;Blend ICC highlights with matrix
-!TP_ICM_BLENDCMSMATRIX_TOOLTIP;Enable to recover clipped highlights when using LUT-based ICC profiles.
-!TP_ICM_BPC;Black Point Compensation
-!TP_ICM_DCPILLUMINANT;Illuminant
-!TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
-!TP_ICM_DCPILLUMINANT_TOOLTIP;Select which embedded DCP illuminant to employ. Default is "interpolated" which is a mix between the two based on white balance. The setting is only available if a dual-illuminant DCP with interpolation support is selected.
-!TP_ICM_INPUTCAMERAICC;Auto-matched camera profile
-!TP_ICM_INPUTCAMERAICC_TOOLTIP;Use RawTherapee's camera-specific DCP or ICC input color profiles. These profiles are more precise than simpler matrix ones. They are not available for all cameras. These profiles are stored in the /iccprofiles/input and /dcpprofiles folders and are automatically retrieved based on a file name matching to the exact model name of the camera.
-!TP_ICM_INPUTCAMERA_TOOLTIP;Use a simple color matrix from dcraw, an enhanced RawTherapee version (whichever is available based on camera model) or one embedded in the DNG.
-!TP_ICM_INPUTCUSTOM_TOOLTIP;Select your own DCP/ICC color profile file for the camera.
-!TP_ICM_INPUTEMBEDDED_TOOLTIP;Use color profile embedded in non-raw files.
-!TP_ICM_INPUTNONE;No profile
-!TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases.
-!TP_ICM_PROFILEINTENT;Rendering Intent
-!TP_ICM_SAVEREFERENCE;Save Reference Image
-!TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance
-!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles.
-!TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile.
-!TP_ICM_TONECURVE;Tone curve
-!TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only available if the selected DCP has a tone curve.
-!TP_ICM_WORKING_TRC;Tone response curve:
-!TP_ICM_WORKING_TRC_CUSTOM;Custom
-!TP_ICM_WORKING_TRC_GAMMA;Gamma
-!TP_ICM_WORKING_TRC_NONE;None
-!TP_ICM_WORKING_TRC_SLOPE;Slope
-!TP_ICM_WORKING_TRC_TOOLTIP;Only for built-in profiles.
-!TP_IMPULSEDENOISE_LABEL;Impulse Noise Reduction
-!TP_IMPULSEDENOISE_THRESH;Threshold
-!TP_LABCURVE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_LABCURVE_AVOIDCOLORSHIFT_TOOLTIP;Fit colors into gamut of the working color space and apply Munsell correction.
-!TP_LABCURVE_BRIGHTNESS;Lightness
-!TP_LABCURVE_CHROMATICITY;Chromaticity
-!TP_LABCURVE_CHROMA_TOOLTIP;To apply B&W toning, set Chromaticity to -100.
-!TP_LABCURVE_CONTRAST;Contrast
-!TP_LABCURVE_CURVEEDITOR;Luminance Curve
-!TP_LABCURVE_CURVEEDITOR_A_RANGE1;Green Saturated
-!TP_LABCURVE_CURVEEDITOR_A_RANGE2;Green Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE3;Red Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE4;Red Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE1;Blue Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE2;Blue Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE3;Yellow Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE4;Yellow Saturated
-!TP_LABCURVE_CURVEEDITOR_CC;CC
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE1;Neutral
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE2;Dull
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE3;Pastel
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE4;Saturated
-!TP_LABCURVE_CURVEEDITOR_CC_TOOLTIP;Chromaticity according to chromaticity C=f(C)
-!TP_LABCURVE_CURVEEDITOR_CH;CH
-!TP_LABCURVE_CURVEEDITOR_CH_TOOLTIP;Chromaticity according to hue C=f(H)
-!TP_LABCURVE_CURVEEDITOR_CL;CL
-!TP_LABCURVE_CURVEEDITOR_CL_TOOLTIP;Chromaticity according to luminance C=f(L)
-!TP_LABCURVE_CURVEEDITOR_HH;HH
-!TP_LABCURVE_CURVEEDITOR_HH_TOOLTIP;Hue according to hue H=f(H)
-!TP_LABCURVE_CURVEEDITOR_LC;LC
-!TP_LABCURVE_CURVEEDITOR_LC_TOOLTIP;Luminance according to chromaticity L=f(C)
-!TP_LABCURVE_CURVEEDITOR_LH;LH
-!TP_LABCURVE_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H)
-!TP_LABCURVE_CURVEEDITOR_LL_TOOLTIP;Luminance according to luminance L=f(L)
-!TP_LABCURVE_LABEL;L*a*b* Adjustments
-!TP_LABCURVE_LCREDSK;Restrict LC to red and skin-tones
-!TP_LABCURVE_LCREDSK_TIP;If enabled, the LC Curve affects only red and skin-tones.\nIf disabled, it applies to all tones.
-!TP_LABCURVE_RSTPROTECTION;Red and skin-tones protection
-!TP_LABCURVE_RSTPRO_TOOLTIP;Works on the Chromaticity slider and the CC curve.
-!TP_LENSGEOM_AUTOCROP;Auto-Crop
-!TP_LENSGEOM_FILL;Auto-fill
-!TP_LENSGEOM_LABEL;Lens / Geometry
-!TP_LENSPROFILE_CORRECTION_AUTOMATCH;Automatically selected
-!TP_LENSPROFILE_CORRECTION_LCPFILE;LCP file
-!TP_LENSPROFILE_CORRECTION_MANUAL;Manually selected
-!TP_LENSPROFILE_LABEL;Profiled Lens Correction
-!TP_LENSPROFILE_LENS_WARNING;Warning: the crop factor used for lens profiling is larger than the crop factor of the camera, the results might be wrong.
-!TP_LENSPROFILE_MODE_HEADER;Lens Profile
-!TP_LENSPROFILE_USE_CA;Chromatic aberration
-!TP_LENSPROFILE_USE_GEOMETRIC;Geometric distortion
-!TP_LENSPROFILE_USE_HEADER;Correct
-!TP_LENSPROFILE_USE_VIGNETTING;Vignetting
-!TP_LOCALCONTRAST_AMOUNT;Amount
-!TP_LOCALCONTRAST_DARKNESS;Darkness level
-!TP_LOCALCONTRAST_LABEL;Local Contrast
-!TP_LOCALCONTRAST_LIGHTNESS;Lightness level
-!TP_LOCALCONTRAST_RADIUS;Radius
-!TP_METADATA_EDIT;Apply modifications
-!TP_METADATA_MODE;Metadata copy mode
-!TP_METADATA_STRIP;Strip all metadata
-!TP_METADATA_TUNNEL;Copy unchanged
-!TP_NEUTRAL;Reset
-!TP_NEUTRAL_TIP;Resets exposure sliders to neutral values.\nApplies to the same controls that Auto Levels applies to, regardless of whether you used Auto Levels or not.
-!TP_PCVIGNETTE_FEATHER;Feather
-!TP_PCVIGNETTE_FEATHER_TOOLTIP;Feathering:\n0 = corners only,\n50 = halfway to center,\n100 = to center.
-!TP_PCVIGNETTE_LABEL;Vignette Filter
-!TP_PCVIGNETTE_ROUNDNESS;Roundness
-!TP_PCVIGNETTE_ROUNDNESS_TOOLTIP;Roundness:\n0 = rectangle,\n50 = fitted ellipse,\n100 = circle.
-!TP_PCVIGNETTE_STRENGTH;Strength
-!TP_PCVIGNETTE_STRENGTH_TOOLTIP;Filter strength in stops (reached in corners).
-!TP_PERSPECTIVE_HORIZONTAL;Horizontal
-!TP_PERSPECTIVE_LABEL;Perspective
-!TP_PERSPECTIVE_VERTICAL;Vertical
-!TP_PFCURVE_CURVEEDITOR_CH;Hue
-!TP_PFCURVE_CURVEEDITOR_CH_TOOLTIP;Controls defringe strength by color.\nHigher = more,\nLower = less.
-!TP_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!TP_PREPROCESS_DEADPIXFILT_TOOLTIP;Tries to suppress dead pixels.
-!TP_PREPROCESS_GREENEQUIL;Green equilibration
-!TP_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!TP_PREPROCESS_HOTPIXFILT_TOOLTIP;Tries to suppress hot pixels.
-!TP_PREPROCESS_LABEL;Preprocessing
-!TP_PREPROCESS_LINEDENOISE;Line noise filter
-!TP_PREPROCESS_LINEDENOISE_DIRECTION;Direction
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_BOTH;Both
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_HORIZONTAL;Horizontal
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_PDAF_LINES;Horizontal only on PDAF rows
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_VERTICAL;Vertical
-!TP_PREPROCESS_NO_FOUND;None found
-!TP_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!TP_PRSHARPENING_LABEL;Post-Resize Sharpening
-!TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions.
-!TP_RAWCACORR_AUTO;Auto-correction
-!TP_RAWCACORR_AUTOIT;Iterations
-!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
-!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CABLUE;Blue
-!TP_RAWCACORR_CARED;Red
-!TP_RAWCACORR_CASTR;Strength
-!TP_RAWEXPOS_BLACKS;Black Levels
-!TP_RAWEXPOS_BLACK_0;Green 1 (lead)
-!TP_RAWEXPOS_BLACK_1;Red
-!TP_RAWEXPOS_BLACK_2;Blue
-!TP_RAWEXPOS_BLACK_3;Green 2
-!TP_RAWEXPOS_BLACK_BLUE;Blue
-!TP_RAWEXPOS_BLACK_GREEN;Green
-!TP_RAWEXPOS_BLACK_RED;Red
-!TP_RAWEXPOS_LINEAR;White-point correction
-!TP_RAWEXPOS_RGB;Red, Green, Blue
-!TP_RAWEXPOS_TWOGREEN;Link greens
-!TP_RAW_1PASSMEDIUM;1-pass (Markesteijn)
-!TP_RAW_2PASS;1-pass+fast
-!TP_RAW_3PASSBEST;3-pass (Markesteijn)
-!TP_RAW_4PASS;3-pass+fast
-!TP_RAW_AHD;AHD
-!TP_RAW_AMAZE;AMaZE
-!TP_RAW_AMAZEVNG4;AMaZE+VNG4
-!TP_RAW_BORDER;Border
-!TP_RAW_DCB;DCB
-!TP_RAW_DCBENHANCE;DCB enhancement
-!TP_RAW_DCBITERATIONS;Number of DCB iterations
-!TP_RAW_DCBVNG4;DCB+VNG4
-!TP_RAW_DMETHOD_PROGRESSBAR;%1 demosaicing...
-!TP_RAW_DMETHOD_PROGRESSBAR_REFINE;Demosaicing refinement...
-!TP_RAW_DMETHOD_TOOLTIP;Note: IGV and LMMSE are dedicated to high ISO images to aid in noise reduction without leading to maze patterns, posterization or a washed-out look.\nPixel Shift is for Pentax/Sony Pixel Shift files. It falls back to AMaZE for non-Pixel Shift files.
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST;Auto threshold
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST_TOOLTIP;If the checkbox is checked (recommended), RawTherapee calculates an optimum value based on flat regions in the image.\nIf there is no flat region in the image or the image is too noisy, the value will be set to 0.\nTo set the value manually, uncheck the checkbox first (reasonable values depend on the image).
-!TP_RAW_DUALDEMOSAICCONTRAST;Contrast threshold
-!TP_RAW_EAHD;EAHD
-!TP_RAW_FAST;Fast
-!TP_RAW_HD;Threshold
-!TP_RAW_HD_TOOLTIP;Lower values make hot/dead pixel detection more aggressive, but false positives may lead to artifacts. If you notice any artifacts appearing when enabling the Hot/Dead Pixel Filters, gradually increase the threshold value until they disappear.
-!TP_RAW_HPHD;HPHD
-!TP_RAW_IGV;IGV
-!TP_RAW_IMAGENUM;Sub-image
-!TP_RAW_IMAGENUM_SN;SN mode
-!TP_RAW_IMAGENUM_TOOLTIP;Some raw files consist of several sub-images (Pentax/Sony Pixel Shift, Pentax 3-in-1 HDR, Canon Dual Pixel, Fuji EXR).\n\nWhen using any demosaicing method other than Pixel Shift, this selects which sub-image is used.\n\nWhen using the Pixel Shift demosaicing method on a Pixel Shift raw, all sub-images are used, and this selects which sub-image should be used for moving parts.
-!TP_RAW_LABEL;Demosaicing
-!TP_RAW_LMMSE;LMMSE
-!TP_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!TP_RAW_LMMSE_TOOLTIP;Adds gamma (step 1), median (steps 2-4) and refinement (steps 5-6) to reduce artifacts and improve the signal-to-noise ratio.
-!TP_RAW_MONO;Mono
-!TP_RAW_NONE;None (Shows sensor pattern)
-!TP_RAW_PIXELSHIFT;Pixel Shift
-!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
-!TP_RAW_PIXELSHIFTDMETHOD;Demosaic method for motion
-!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
-!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
-!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
-!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
-!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
-!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
-!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
-!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
-!TP_RAW_PIXELSHIFTMM_OFF;Off
-!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
-!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
-!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
-!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
-!TP_RAW_PIXELSHIFTSIGMA;Blur radius
-!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
-!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
-!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
-!TP_RAW_RCD;RCD
-!TP_RAW_RCDVNG4;RCD+VNG4
-!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
-!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.\n+fast gives less artifacts in flat areas
-!TP_RAW_SENSOR_XTRANS_LABEL;Sensor with X-Trans Matrix
-!TP_RAW_VNG4;VNG4
-!TP_RAW_XTRANS;X-Trans
-!TP_RAW_XTRANSFAST;Fast X-Trans
-!TP_RESIZE_ALLOW_UPSCALING;Allow Upscaling
-!TP_RESIZE_APPLIESTO;Applies to:
-!TP_RESIZE_CROPPEDAREA;Cropped Area
-!TP_RESIZE_FITBOX;Bounding Box
-!TP_RESIZE_FULLIMAGE;Full Image
-!TP_RESIZE_HEIGHT;Height
-!TP_RESIZE_LANCZOS;Lanczos
-!TP_RESIZE_SPECIFY;Specify:
-!TP_RESIZE_WIDTH;Width
-!TP_RETINEX_CONTEDIT_HSL;HSL histogram
-!TP_RETINEX_CONTEDIT_LAB;L*a*b* histogram
-!TP_RETINEX_CONTEDIT_LH;Hue
-!TP_RETINEX_CONTEDIT_MAP;Equalizer
-!TP_RETINEX_CURVEEDITOR_CD;L=f(L)
-!TP_RETINEX_CURVEEDITOR_CD_TOOLTIP;Luminance according to luminance L=f(L)\nCorrect raw data to reduce halos and artifacts.
-!TP_RETINEX_CURVEEDITOR_LH;Strength=f(H)
-!TP_RETINEX_CURVEEDITOR_LH_TOOLTIP;Strength according to hue Strength=f(H)\nThis curve also acts on chroma when using the "Highlight" retinex method.
-!TP_RETINEX_CURVEEDITOR_MAP;L=f(L)
-!TP_RETINEX_CURVEEDITOR_MAP_TOOLTIP;This curve can be applied alone or with a Gaussian mask or wavelet mask.\nBeware of artifacts!
-!TP_RETINEX_EQUAL;Equalizer
-!TP_RETINEX_FREEGAMMA;Free gamma
-!TP_RETINEX_GAIN;Gain
-!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
-!TP_RETINEX_GAINTRANSMISSION;Gain transmission
-!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
-!TP_RETINEX_GAMMA;Gamma
-!TP_RETINEX_GAMMA_FREE;Free
-!TP_RETINEX_GAMMA_HIGH;High
-!TP_RETINEX_GAMMA_LOW;Low
-!TP_RETINEX_GAMMA_MID;Middle
-!TP_RETINEX_GAMMA_NONE;None
-!TP_RETINEX_GAMMA_TOOLTIP;Restore tones by applying gamma before and after Retinex. Different from Retinex curves or others curves (Lab, Exposure, etc.).
-!TP_RETINEX_GRAD;Transmission gradient
-!TP_RETINEX_GRADS;Strength gradient
-!TP_RETINEX_GRADS_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Strength is reduced when iterations increase, and conversely.
-!TP_RETINEX_GRAD_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Variance and Threshold are reduced when iterations increase, and conversely.
-!TP_RETINEX_HIGH;High
-!TP_RETINEX_HIGHLIG;Highlight
-!TP_RETINEX_HIGHLIGHT;Highlight threshold
-!TP_RETINEX_HIGHLIGHT_TOOLTIP;Increase action of High algorithm.\nMay require you to re-adjust "Neighboring pixels" and to increase the "White-point correction" in the Raw tab -> Raw White Points tool.
-!TP_RETINEX_HSLSPACE_LIN;HSL-Linear
-!TP_RETINEX_HSLSPACE_LOG;HSL-Logarithmic
-!TP_RETINEX_ITER;Iterations (Tone-mapping)
-!TP_RETINEX_ITERF;Tone mapping
-!TP_RETINEX_ITER_TOOLTIP;Simulate a tone-mapping operator.\nHigh values increase the processing time.
-!TP_RETINEX_LABEL;Retinex
-!TP_RETINEX_LABEL_MASK;Mask
-!TP_RETINEX_LABSPACE;L*a*b*
-!TP_RETINEX_LOW;Low
-!TP_RETINEX_MAP;Method
-!TP_RETINEX_MAP_GAUS;Gaussian mask
-!TP_RETINEX_MAP_MAPP;Sharp mask (wavelet partial)
-!TP_RETINEX_MAP_MAPT;Sharp mask (wavelet total)
-!TP_RETINEX_MAP_METHOD_TOOLTIP;Use the mask generated by the Gaussian function above (Radius, Method) to reduce halos and artifacts.\n\nCurve only: apply a diagonal contrast curve on the mask.\nBeware of artifacts!\n\nGaussian mask: generate and use a Gaussian blur of the original mask.\nQuick.\n\nSharp mask: generate and use a wavelet on the original mask.\nSlow.
-!TP_RETINEX_MAP_NONE;None
-!TP_RETINEX_MEDIAN;Transmission median filter
-!TP_RETINEX_METHOD;Method
-!TP_RETINEX_METHOD_TOOLTIP;Low = Reinforce low light.\nUniform = Equalize action.\nHigh = Reinforce high light.\nHighlights = Remove magenta in highlights.
-!TP_RETINEX_MLABEL;Restored haze-free Min=%1 Max=%2
-!TP_RETINEX_MLABEL_TOOLTIP;Should be near min=0 max=32768\nRestored image with no mixture.
-!TP_RETINEX_NEIGHBOR;Radius
-!TP_RETINEX_NEUTRAL;Reset
-!TP_RETINEX_NEUTRAL_TIP;Reset all sliders and curves to their default values.
-!TP_RETINEX_OFFSET;Offset (brightness)
-!TP_RETINEX_SCALES;Gaussian gradient
-!TP_RETINEX_SCALES_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Scale and radius are reduced when iterations increase, and conversely.
-!TP_RETINEX_SETTINGS;Settings
-!TP_RETINEX_SKAL;Scale
-!TP_RETINEX_SLOPE;Free gamma slope
-!TP_RETINEX_STRENGTH;Strength
-!TP_RETINEX_THRESHOLD;Threshold
-!TP_RETINEX_THRESHOLD_TOOLTIP;Limits in/out.\nIn = image source,\nOut = image gauss.
-!TP_RETINEX_TLABEL;TM Min=%1 Max=%2 Mean=%3 Sigma=%4
-!TP_RETINEX_TLABEL2;TM Tm=%1 TM=%2
-!TP_RETINEX_TLABEL_TOOLTIP;Transmission map result.\nMin and Max are used by Variance.\nMean and Sigma.\nTm=Min TM=Max of transmission map.
-!TP_RETINEX_TRANF;Transmission
-!TP_RETINEX_TRANSMISSION;Transmission map
-!TP_RETINEX_TRANSMISSION_TOOLTIP;Transmission according to transmission.\nAbscissa: transmission from negative values (min), mean, and positives values (max).\nOrdinate: amplification or reduction.
-!TP_RETINEX_UNIFORM;Uniform
-!TP_RETINEX_VARIANCE;Contrast
-!TP_RETINEX_VARIANCE_TOOLTIP;Low variance increase local contrast and saturation, but can lead to artifacts.
-!TP_RETINEX_VIEW;Process
-!TP_RETINEX_VIEW_MASK;Mask
-!TP_RETINEX_VIEW_METHOD_TOOLTIP;Standard - Normal display.\nMask - Displays the mask.\nUnsharp mask - Displays the image with a high radius unsharp mask.\nTransmission - Auto/Fixed - Displays the file transmission-map, before any action on contrast and brightness.\n\nAttention: the mask does not correspond to reality, but is amplified to make it more visible.
-!TP_RETINEX_VIEW_NONE;Standard
-!TP_RETINEX_VIEW_TRAN;Transmission - Auto
-!TP_RETINEX_VIEW_TRAN2;Transmission - Fixed
-!TP_RETINEX_VIEW_UNSHARP;Unsharp mask
-!TP_RGBCURVES_BLUE;B
-!TP_RGBCURVES_CHANNEL;Channel
-!TP_RGBCURVES_GREEN;G
-!TP_RGBCURVES_LABEL;RGB Curves
-!TP_RGBCURVES_LUMAMODE;Luminosity mode
-!TP_RGBCURVES_LUMAMODE_TOOLTIP;Luminosity mode allows to vary the contribution of R, G and B channels to the luminosity of the image, without altering image color.
-!TP_RGBCURVES_RED;R
-!TP_SAVEDIALOG_OK_TIP;Shortcut: Ctrl-Enter
-!TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
-!TP_SHARPENEDGE_AMOUNT;Quantity
-!TP_SHARPENEDGE_LABEL;Edges
-!TP_SHARPENEDGE_PASSES;Iterations
-!TP_SHARPENEDGE_THREE;Luminance only
-!TP_SHARPENING_BLUR;Blur radius
-!TP_SHARPENING_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_AMOUNT;Quantity
-!TP_SHARPENMICRO_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_LABEL;Microcontrast
-!TP_SHARPENMICRO_MATRIX;3×3 matrix instead of 5×5
-!TP_SHARPENMICRO_UNIFORMITY;Uniformity
-!TP_SOFTLIGHT_LABEL;Soft Light
-!TP_SOFTLIGHT_STRENGTH;Strength
-!TP_TM_FATTAL_AMOUNT;Amount
-!TP_TM_FATTAL_ANCHOR;Anchor
-!TP_TM_FATTAL_LABEL;Dynamic Range Compression
-!TP_TM_FATTAL_THRESHOLD;Detail
-!TP_VIBRANCE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES;HH
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_LABEL;Skin-tones
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE1;Red/Purple
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE2;Red
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE3;Red/Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE4;Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_TOOLTIP;Hue according to hue H=f(H)
-!TP_VIBRANCE_LABEL;Vibrance
-!TP_VIBRANCE_PASTELS;Pastel Tones
-!TP_VIBRANCE_PASTSATTOG;Link pastel and saturated tones
-!TP_VIBRANCE_PROTECTSKINS;Protect skin-tones
-!TP_VIBRANCE_PSTHRESHOLD;Pastel/saturated tones threshold
-!TP_VIBRANCE_PSTHRESHOLD_SATTHRESH;Saturation threshold
-!TP_VIBRANCE_PSTHRESHOLD_TOOLTIP;The vertical axis represents pastel tones at the bottom and saturated tones at the top.\nThe horizontal axis represents the saturation range.
-!TP_VIBRANCE_PSTHRESHOLD_WEIGTHING;Pastel/saturated transition's weighting
-!TP_VIBRANCE_SATURATED;Saturated Tones
-!TP_VIGNETTING_CENTER;Center
-!TP_VIGNETTING_CENTER_X;Center X
-!TP_VIGNETTING_CENTER_Y;Center Y
-!TP_VIGNETTING_STRENGTH;Strength
-!TP_WAVELET_1;Level 1
-!TP_WAVELET_2;Level 2
-!TP_WAVELET_3;Level 3
-!TP_WAVELET_4;Level 4
-!TP_WAVELET_5;Level 5
-!TP_WAVELET_6;Level 6
-!TP_WAVELET_7;Level 7
-!TP_WAVELET_8;Level 8
-!TP_WAVELET_9;Level 9
-!TP_WAVELET_APPLYTO;Apply To
-!TP_WAVELET_AVOID;Avoid color shift
-!TP_WAVELET_B0;Black
-!TP_WAVELET_B1;Grey
-!TP_WAVELET_B2;Residual
-!TP_WAVELET_BACKGROUND;Background
-!TP_WAVELET_BACUR;Curve
-!TP_WAVELET_BALANCE;Contrast balance d/v-h
-!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified.
-!TP_WAVELET_BALCHRO;Chroma balance
-!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance.
-!TP_WAVELET_BANONE;None
-!TP_WAVELET_BASLI;Slider
-!TP_WAVELET_BATYPE;Contrast balance method
-!TP_WAVELET_CBENAB;Toning and Color Balance
-!TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted
-!TP_WAVELET_CCURVE;Local contrast
-!TP_WAVELET_CH1;Whole chroma range
-!TP_WAVELET_CH2;Saturated/pastel
-!TP_WAVELET_CH3;Link contrast levels
-!TP_WAVELET_CHCU;Curve
-!TP_WAVELET_CHR;Chroma-contrast link strength
-!TP_WAVELET_CHRO;Saturated/pastel threshold
-!TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored.
-!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength"
-!TP_WAVELET_CHSL;Sliders
-!TP_WAVELET_CHTYPE;Chrominance method
-!TP_WAVELET_COLORT;Opacity Red-Green
-!TP_WAVELET_COMPCONT;Contrast
-!TP_WAVELET_COMPGAMMA;Compression gamma
-!TP_WAVELET_COMPGAMMA_TOOLTIP;Adjusting the gamma of the residual image allows you to equilibrate the data and histogram.
-!TP_WAVELET_COMPTM;Tone mapping
-!TP_WAVELET_CONTEDIT;'After' contrast curve
-!TP_WAVELET_CONTR;Gamut
-!TP_WAVELET_CONTRA;Contrast
-!TP_WAVELET_CONTRAST_MINUS;Contrast -
-!TP_WAVELET_CONTRAST_PLUS;Contrast +
-!TP_WAVELET_CONTRA_TOOLTIP;Changes contrast of the residual image.
-!TP_WAVELET_CTYPE;Chrominance control
-!TP_WAVELET_CURVEEDITOR_CC_TOOLTIP;Modifies local contrast as a function of the original local contrast (abscissa).\nLow abscissa values represent small local contrast (real values about 10..20).\n50% abscissa represents average local contrast (real value about 100..300).\n66% abscissa represents standard deviation of local contrast (real value about 300..800).\n100% abscissa represents maximum local contrast (real value about 3000..8000).
-!TP_WAVELET_CURVEEDITOR_CH;Contrast levels=f(Hue)
-!TP_WAVELET_CURVEEDITOR_CH_TOOLTIP;Modifies each level's contrast as a function of hue.\nTake care not to overwrite changes made with the Gamut sub-tool's hue controls.\nThe curve will only have an effect when wavelet contrast level sliders are non-zero.
-!TP_WAVELET_CURVEEDITOR_CL;L
-!TP_WAVELET_CURVEEDITOR_CL_TOOLTIP;Applies a final contrast luminance curve at the end of the wavelet treatment.
-!TP_WAVELET_CURVEEDITOR_HH;HH
-!TP_WAVELET_CURVEEDITOR_HH_TOOLTIP;Modifies the residual image's hue as a function of hue.
-!TP_WAVELET_DALL;All directions
-!TP_WAVELET_DAUB;Edge performance
-!TP_WAVELET_DAUB2;D2 - low
-!TP_WAVELET_DAUB4;D4 - standard
-!TP_WAVELET_DAUB6;D6 - standard plus
-!TP_WAVELET_DAUB10;D10 - medium
-!TP_WAVELET_DAUB14;D14 - high
-!TP_WAVELET_DAUB_TOOLTIP;Changes Daubechies coefficients:\nD4 = Standard,\nD14 = Often best performance, 10% more time-intensive.\n\nAffects edge detection as well as the general quality of the firsts levels. However the quality is not strictly related to this coefficient and can vary with images and uses.
-!TP_WAVELET_DONE;Vertical
-!TP_WAVELET_DTHR;Diagonal
-!TP_WAVELET_DTWO;Horizontal
-!TP_WAVELET_EDCU;Curve
-!TP_WAVELET_EDGCONT;Local contrast
-!TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, top-left, top-right and bottom-right represent respectively local contrast for low values, mean, mean+stdev and maxima.
-!TP_WAVELET_EDGE;Edge Sharpness
-!TP_WAVELET_EDGEAMPLI;Base amplification
-!TP_WAVELET_EDGEDETECT;Gradient sensitivity
-!TP_WAVELET_EDGEDETECTTHR;Threshold low (noise)
-!TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection)
-!TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky.
-!TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise.
-!TP_WAVELET_EDGESENSI;Edge sensitivity
-!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
-!TP_WAVELET_EDGTHRESH;Detail
-!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
-!TP_WAVELET_EDRAD;Radius
-!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
-!TP_WAVELET_EDSL;Threshold Sliders
-!TP_WAVELET_EDTYPE;Local contrast method
-!TP_WAVELET_EDVAL;Strength
-!TP_WAVELET_FINAL;Final Touchup
-!TP_WAVELET_FINEST;Finest
-!TP_WAVELET_HIGHLIGHT;Highlight luminance range
-!TP_WAVELET_HS1;Whole luminance range
-!TP_WAVELET_HS2;Shadows/Highlights
-!TP_WAVELET_HUESKIN;Skin hue
-!TP_WAVELET_HUESKIN_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_HUESKY;Sky hue
-!TP_WAVELET_HUESKY_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_ITER;Delta balance levels
-!TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels.
-!TP_WAVELET_LABEL;Wavelet Levels
-!TP_WAVELET_LARGEST;Coarsest
-!TP_WAVELET_LEVCH;Chroma
-!TP_WAVELET_LEVDIR_ALL;All levels in all directions
-!TP_WAVELET_LEVDIR_INF;Below or equal the level
-!TP_WAVELET_LEVDIR_ONE;One level
-!TP_WAVELET_LEVDIR_SUP;Above the level
-!TP_WAVELET_LEVELS;Wavelet levels
-!TP_WAVELET_LEVELS_TOOLTIP;Choose the number of detail levels the image is to be decomposed into. More levels require more RAM and require a longer processing time.
-!TP_WAVELET_LEVF;Contrast
-!TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1
-!TP_WAVELET_LEVONE;Level 2
-!TP_WAVELET_LEVTHRE;Level 4
-!TP_WAVELET_LEVTWO;Level 3
-!TP_WAVELET_LEVZERO;Level 1
-!TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength
-!TP_WAVELET_LIPST;Enhanced algoritm
-!TP_WAVELET_LOWLIGHT;Shadow luminance range
-!TP_WAVELET_MEDGREINF;First level
-!TP_WAVELET_MEDI;Reduce artifacts in blue sky
-!TP_WAVELET_MEDILEV;Edge detection
-!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine.
-!TP_WAVELET_NEUTRAL;Neutral
-!TP_WAVELET_NOIS;Denoise
-!TP_WAVELET_NOISE;Denoise and Refine
-!TP_WAVELET_NPHIGH;High
-!TP_WAVELET_NPLOW;Low
-!TP_WAVELET_NPNONE;None
-!TP_WAVELET_NPTYPE;Neighboring pixels
-!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced.
-!TP_WAVELET_OPACITY;Opacity Blue-Yellow
-!TP_WAVELET_OPACITYW;Contrast balance d/v-h curve
-!TP_WAVELET_OPACITYWL;Final local contrast
-!TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right.
-!TP_WAVELET_PASTEL;Pastel chroma
-!TP_WAVELET_PROC;Process
-!TP_WAVELET_RE1;Reinforced
-!TP_WAVELET_RE2;Unchanged
-!TP_WAVELET_RE3;Reduced
-!TP_WAVELET_RESCHRO;Chroma
-!TP_WAVELET_RESCON;Shadows
-!TP_WAVELET_RESCONH;Highlights
-!TP_WAVELET_RESID;Residual Image
-!TP_WAVELET_SAT;Saturated chroma
-!TP_WAVELET_SETTINGS;Wavelet Settings
-!TP_WAVELET_SKIN;Skin targetting/protection
-!TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_WAVELET_SKY;Sky targetting/protection
-!TP_WAVELET_SKY_TOOLTIP;At -100 sky-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 sky-tones are protected while all other tones are affected.
-!TP_WAVELET_STREN;Strength
-!TP_WAVELET_STRENGTH;Strength
-!TP_WAVELET_SUPE;Extra
-!TP_WAVELET_THR;Shadows threshold
-!TP_WAVELET_THRESHOLD;Highlight levels
-!TP_WAVELET_THRESHOLD2;Shadow levels
-!TP_WAVELET_THRESHOLD2_TOOLTIP;Only levels between 9 and 9 minus the value will be affected by the shadow luminance range. Other levels will be fully treated. The highest level possible is limited by the highlight level value (9 minus highlight level value).
-!TP_WAVELET_THRESHOLD_TOOLTIP;Only levels beyond the chosen value will be affected by the highlight luminance range. Other levels will be fully treated. The chosen value here limits the highest possible value of the shadow levels.
-!TP_WAVELET_THRH;Highlights threshold
-!TP_WAVELET_TILESBIG;Big tiles
-!TP_WAVELET_TILESFULL;Full image
-!TP_WAVELET_TILESIZE;Tiling method
-!TP_WAVELET_TILESLIT;Little tiles
-!TP_WAVELET_TILES_TOOLTIP;Processing the full image leads to better quality and is the recommended option, while using tiles is a fall-back solution for users with little RAM. Refer to RawPedia for memory requirements.
-!TP_WAVELET_TMSTRENGTH;Compression strength
-!TP_WAVELET_TMSTRENGTH_TOOLTIP;Control the strength of tone mapping or contrast compression of the residual image. When the value is different from 0, the Strength and Gamma sliders of the Tone Mapping tool in the Exposure tab will become grayed out.
-!TP_WAVELET_TMTYPE;Compression method
-!TP_WAVELET_TON;Toning
-!TP_WBALANCE_CLOUDY;Cloudy
-!TP_WBALANCE_DAYLIGHT;Daylight (sunny)
-!TP_WBALANCE_EQBLUERED;Blue/Red equalizer
-!TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behavior of "white balance" by modulating the blue/red balance.\nThis can be useful when shooting conditions:\na) are far from the standard illuminant (e.g. underwater),\nb) are far from conditions where calibrations were performed,\nc) where the matrices or ICC profiles are unsuitable.
-!TP_WBALANCE_FLASH55;Leica
-!TP_WBALANCE_FLASH60;Standard, Canon, Pentax, Olympus
-!TP_WBALANCE_FLASH65;Nikon, Panasonic, Sony, Minolta
-!TP_WBALANCE_FLASH_HEADER;Flash
-!TP_WBALANCE_FLUO1;F1 - Daylight
-!TP_WBALANCE_FLUO2;F2 - Cool White
-!TP_WBALANCE_FLUO3;F3 - White
-!TP_WBALANCE_FLUO4;F4 - Warm White
-!TP_WBALANCE_FLUO5;F5 - Daylight
-!TP_WBALANCE_FLUO6;F6 - Lite White
-!TP_WBALANCE_FLUO7;F7 - D65 Daylight Simulator
-!TP_WBALANCE_FLUO8;F8 - D50 / Sylvania F40 Design
-!TP_WBALANCE_FLUO9;F9 - Cool White Deluxe
-!TP_WBALANCE_FLUO10;F10 - Philips TL85
-!TP_WBALANCE_FLUO11;F11 - Philips TL84
-!TP_WBALANCE_FLUO12;F12 - Philips TL83
-!TP_WBALANCE_FLUO_HEADER;Fluorescent
-!TP_WBALANCE_GTI;GTI
-!TP_WBALANCE_HMI;HMI
-!TP_WBALANCE_JUDGEIII;JudgeIII
-!TP_WBALANCE_LAMP_HEADER;Lamp
-!TP_WBALANCE_LED_CRS;CRS SP12 WWMR16
-!TP_WBALANCE_LED_HEADER;LED
-!TP_WBALANCE_LED_LSI;LSI Lumelex 2040
-!TP_WBALANCE_PICKER;Pick
-!TP_WBALANCE_SHADE;Shade
-!TP_WBALANCE_SOLUX35;Solux 3500K
-!TP_WBALANCE_SOLUX41;Solux 4100K
-!TP_WBALANCE_SOLUX47;Solux 4700K (vendor)
-!TP_WBALANCE_SOLUX47_NG;Solux 4700K (Nat. Gallery)
-!TP_WBALANCE_TEMPBIAS;AWB temperature bias
-!TP_WBALANCE_TEMPBIAS_TOOLTIP;Allows to alter the computation of the "auto white balance"\nby biasing it towards warmer or cooler temperatures. The bias\nis expressed as a percentage of the computed temperature,\nso that the result is given by "computedTemp + computedTemp * bias".
-!TP_WBALANCE_TUNGSTEN;Tungsten
-!TP_WBALANCE_WATER1;UnderWater 1
-!TP_WBALANCE_WATER2;UnderWater 2
-!TP_WBALANCE_WATER_HEADER;UnderWater
-!ZOOMPANEL_100;(100%)
-!ZOOMPANEL_NEWCROPWINDOW;Open (new) detail window
-!ZOOMPANEL_ZOOM100;Zoom to 100%\nShortcut: z
-!ZOOMPANEL_ZOOMFITCROPSCREEN;Fit crop to screen\nShortcut: f
-!ZOOMPANEL_ZOOMFITSCREEN;Fit whole image to screen\nShortcut: Alt-f
-!ZOOMPANEL_ZOOMIN;Zoom In\nShortcut: +
-!ZOOMPANEL_ZOOMOUT;Zoom Out\nShortcut: -
diff --git a/rtdata/languages/Polish b/rtdata/languages/Polish
index 37f174f18..440add185 100644
--- a/rtdata/languages/Polish
+++ b/rtdata/languages/Polish
@@ -79,7 +79,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Pomiń poprawę LMMSE [raw]
EXPORT_BYPASS_SHARPENEDGE;Pomiń wyostrzanie krawędzi
EXPORT_BYPASS_SHARPENING;Pomiń wyostrzanie
EXPORT_BYPASS_SHARPENMICRO;Pomiń mikrokontrast
-EXPORT_BYPASS_SH_HQ;Pomiń wysokiej jakości korekte cieni/podświetleń
EXPORT_FASTEXPORTOPTIONS;Opcje szybkiego eksportu
EXPORT_INSTRUCTIONS;Opcje szybkiego eksportu umożliwiają pominięcie pewnych narzędzi które mogą być dość wymagające na procesor oraz mogą znacznie przedłużyc czas przetwarzania podczas eksportowania zdjęć. Ta metoda jest zalecana w razie potrzeby szybkiego uzyskania zdjęć o niższej rozdzielczości oraz jakości kiedy zależy nam na czasie a nie chcemy modyfikować plików PP3.
EXPORT_MAXHEIGHT;Maksymalna wysokość:
@@ -88,7 +87,6 @@ EXPORT_PUTTOQUEUEFAST; Dodaj do kolejki szybkiego eksportu
EXPORT_RAW_DMETHOD;Algorytm demozaikowania
EXTPROGTARGET_1;raw
EXTPROGTARGET_2;wywołane w kolejce
-FILEBROWSER_ADDDELTEMPLATE;Dodaj/Usuń szablon...
FILEBROWSER_APPLYPROFILE;Zastosuj profil
FILEBROWSER_APPLYPROFILE_PARTIAL;Zastosuj częściowy profil
FILEBROWSER_AUTODARKFRAME;Automatyczne użycie czarnej klatki
@@ -202,7 +200,6 @@ GENERAL_WARNING;Uwaga
HISTOGRAM_TOOLTIP_B;Pokaż/Ukryj histogram błękitów.
HISTOGRAM_TOOLTIP_BAR;Pokazuje/Ukrywa wskaźnik RGB.\nKliknięcie prawym przyciskiem myszy na podglądzie zdjęcia blokuje/odblokowuje.
HISTOGRAM_TOOLTIP_CHRO;Pokaż/Ukryj histogram chromatyczności.
-HISTOGRAM_TOOLTIP_FULL;Przełącz histogram pełny (wyłączone)/skalowany (włączone).
HISTOGRAM_TOOLTIP_G;Pokaż/Ukryj histogram zieleni.
HISTOGRAM_TOOLTIP_L;Pokaż/Ukryj histogram luminancji CIELab.
HISTOGRAM_TOOLTIP_R;Pokaż/Ukryj histogram czerwieni.
@@ -672,7 +669,6 @@ PREFERENCES_BEHADDALLHINT;Ustaw wszystkie narzędzia w tryb Dodaj.\nZmian
PREFERENCES_BEHAVIOR;Zachowanie
PREFERENCES_BEHSETALL;'Ustaw' wszystkie
PREFERENCES_BEHSETALLHINT;Ustaw wszystkie narzędzia w tryb Ustaw.\nZmiany parametrów w panelu edycji zbiorczej zostaną traktowane jako absolutne, nie biorąc pod uwagę poprzednich wartości.
-PREFERENCES_BLACKBODY;Wolfram
PREFERENCES_CACHEMAXENTRIES;Maksymalna liczba wpisów w pamięci podręcznej
PREFERENCES_CACHEOPTS;Opcje pamięci podręcznej
PREFERENCES_CACHETHUMBHEIGHT;Maksymalna wysokość miniatury
@@ -684,10 +680,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Rodzaj kluczy
PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Nazwa
PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
PREFERENCES_CUSTPROFBUILDPATH;Ścieżka pliku wykonywalnego
-PREFERENCES_D50;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
PREFERENCES_DARKFRAMEFOUND;Znaleziono
PREFERENCES_DARKFRAMESHOTS;zdjęć(ia)
PREFERENCES_DARKFRAMETEMPLATES;szablonów(ny)
@@ -707,22 +699,10 @@ PREFERENCES_FLATFIELDFOUND;Znaleziono
PREFERENCES_FLATFIELDSDIR;Katalog z pustymi polami
PREFERENCES_FLATFIELDSHOTS;kadry
PREFERENCES_FLATFIELDTEMPLATES;szablony
-PREFERENCES_FLUOF2;Fluorescent F2
-PREFERENCES_FLUOF7;Fluorescent F7
-PREFERENCES_FLUOF11;Fluorescent F11
PREFERENCES_FORIMAGE;Dla zdjęć innych niż raw
PREFERENCES_FORRAW;Dla zdjęć raw
PREFERENCES_GIMPPATH;Katalog, w którym zainstalowany jest GIMP
-PREFERENCES_GREY;Luminancja Yb urządzenia wyjściowego (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram w lewym panelu
-PREFERENCES_HISTOGRAMWORKING;Zastosuj profil roboczy do obliczenia głównego histogramu i Nawigatora
PREFERENCES_HISTOGRAM_TOOLTIP;Jeśli opcja jest włączona profil roboczy jest użyty do obliczenia głównego histogramu oraz panelu Nawigatora, inaczej profil wyjściowy z korektą gamma zostanie użyty.
PREFERENCES_HLTHRESHOLD;Próg dla prześwietleń
PREFERENCES_ICCDIR;Katalog z profilami koloru ICC
@@ -739,7 +719,6 @@ PREFERENCES_MENUGROUPLABEL;Grupuj operacje etykiet
PREFERENCES_MENUGROUPPROFILEOPERATIONS;Grupuj operacje profili przetwarzania
PREFERENCES_MENUGROUPRANK;Grupuj operacje oceny
PREFERENCES_MENUOPTIONS;Opcje menu
-PREFERENCES_METADATA;Metadane
PREFERENCES_MULTITAB;Tryb wielu zakładek
PREFERENCES_MULTITABDUALMON;Tryb wielu zakładek (na drugim monitorze jeśli dostępny)
PREFERENCES_OUTDIR;Katalog wyjściowy
@@ -783,7 +762,6 @@ PREFERENCES_TAB_SOUND;Dźwięki
PREFERENCES_TP_LABEL;Panel narzędzi:
PREFERENCES_TP_VSCROLLBAR;Ukry pionowy pasek przesuwania
PREFERENCES_USEBUNDLEDPROFILES;Użyj załączone profile przetwarzania
-PREFERENCES_VIEW;Balans bieli urządzenia wyjściowego (monitora, TV, projektora, widowni, etc.)
PREFERENCES_WORKFLOW;Tok pracy
PROFILEPANEL_COPYPPASTE;Parametry do skopiowania
PROFILEPANEL_GLOBALPROFILES;Załączone profile przetwarzania
@@ -823,7 +801,6 @@ SAVEDLG_AUTOSUFFIX;Automatycznie dodaj przyrostek, jeżeli plik już istnieje
SAVEDLG_FILEFORMAT;Format pliku
SAVEDLG_FORCEFORMATOPTS;Wymuś opcje zapisu
SAVEDLG_JPEGQUAL;Jakość JPEG
-SAVEDLG_PNGCOMPR;Kompresja PNG
SAVEDLG_PUTTOQUEUE;Umieść w kolejce przetwarzania
SAVEDLG_PUTTOQUEUEHEAD;Umieść na początku kolejki przetwarzania
SAVEDLG_PUTTOQUEUETAIL;Umieść na końcu kolejki przetwarzania
@@ -964,8 +941,6 @@ TP_COLORAPP_SURROUND_DARK;Ciemne
TP_COLORAPP_SURROUND_DIM;Przyćmione
TP_COLORAPP_SURROUND_EXDARK;Bardzo Ciemne (Cut-sheet)
TP_COLORAPP_SURROUND_TOOLTIP;Zmienia barwy i kolory aby wziąć pod uwagę własności widowni urządzenia wyjściowego.\n\nŚrednie:\nŚrednie światło otoczenia (standardowe). Obraz się nie zmieni.\n\nPrzyćmione:\nPrzyćmione otoczenie (TV). Obraz stanie się troszkę ciemniejszy.\n\nCiemne:\nCiemne otoczenie (projektor). Obraz stanie się jeszczę ciemniejszy.\n\nBardzo Ciemne:\nBardzo ciemne otoczenie (cut-sheet). Obraz stanie się bardzo ciemny.
-TP_COLORAPP_SURSOURCE;Ciemne otoczenie
-TP_COLORAPP_SURSOURCE_TOOLTIP;Można użyć kiedy np. obraz wejściowy ma ciemne krawędzie.
TP_COLORAPP_TCMODE_BRIGHTNESS;Jasność
TP_COLORAPP_TCMODE_CHROMA;Chroma
TP_COLORAPP_TCMODE_COLORF;Barwistość
@@ -1036,13 +1011,10 @@ TP_DEFRINGE_THRESHOLD;Próg
TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominancja - Błękit-żółć
TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Chrominancja - Główna
TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominancja - Czerwień-zieleń
-TP_DIRPYRDENOISE_ENH;Tryb ulepszony
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Ulepsza jakość usuwania szumów kosztem około 20% wzrostu czasu przetwarzania.
TP_DIRPYRDENOISE_LUMINANCE_CURVE;Krzywa luminancji
TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Szczegółowość luminancji
TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminacja
TP_DIRPYRDENOISE_MAIN_COLORSPACE;Metoda
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_LABEL;Redukcja szumu
TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;Dla obrazów raw można używać metody RGB oraz L*a*b*.\n\nDla obrazów nie-raw metoda L*a*b* zostanie użyta niezależnie od wyboru.
TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
@@ -1118,10 +1090,6 @@ TP_FLATFIELD_BT_VERTICAL;Pionowy
TP_FLATFIELD_CLIPCONTROL;Zabezpieczenie przed obcinaniem
TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Funkcja ta chroni przed obcinaniem podświetleń które może zaistnieć przy stosowaniu obrazów type "puste pole". Należy zachować ostrożność, ponieważ jeśli obcięte rejony istnieją przed zastosowaniem pustego pola, funkcja ta może spowodować zabarwienie tych rejonów które powinny być białe.
TP_FLATFIELD_LABEL;Puste pole
-TP_GAMMA_CURV;Gamma
-TP_GAMMA_FREE;Dowolna gamma
-TP_GAMMA_OUTPUT;Wyjściowa gamma
-TP_GAMMA_SLOP;Nachylenie (liniowy)
TP_GENERAL_11SCALE_TOOLTIP;Efekty tego narzędzia są widoczne bądź poprawne przy przybliżeniu 100% lub więcej.
TP_GRADIENT_CENTER;Środek
TP_GRADIENT_CENTER_X;Środek X
@@ -1147,8 +1115,6 @@ TP_HSVEQUALIZER_HUE;H
TP_HSVEQUALIZER_LABEL;Ekwalizator HSV
TP_HSVEQUALIZER_SAT;S
TP_HSVEQUALIZER_VAL;V
-TP_ICM_BLENDCMSMATRIX;Tłumienie prześwietleń danymi z matrycy
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Włącz odzyskiwanie prześwietlonych regionow jesli profil ICC wykorzystuje LUT (tablicowanie).
TP_ICM_DCPILLUMINANT;Iluminant
TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolowany
TP_ICM_DCPILLUMINANT_TOOLTIP;Wybierz który osadzony iluminant DCP należy użyć. Domyślną opcją jest "interpolowany", czyli wartość jest mieszaniną pomiędzy dwoma osadzonymi wartościami iluminantu zależnie od balansu bieli. Ten wybór jest możliwy jedynie kiedy DCP zawiera dwa iluminanty z możliwościa interpolacji.
@@ -1290,10 +1256,8 @@ TP_SAVEDIALOG_OK_TIP;Skrót: Ctrl-Enter
TP_SHADOWSHLIGHTS_HIGHLIGHTS;Podświetlenia
TP_SHADOWSHLIGHTS_HLTONALW;Szerokość tonalna
TP_SHADOWSHLIGHTS_LABEL;Cienie/Podświetlenia
-TP_SHADOWSHLIGHTS_LOCALCONTR;Kontrast lokalny
TP_SHADOWSHLIGHTS_RADIUS;Promień
TP_SHADOWSHLIGHTS_SHADOWS;Cienie
-TP_SHADOWSHLIGHTS_SHARPMASK;Ostra maska
TP_SHADOWSHLIGHTS_SHTONALW;Szerokość tonalna
TP_SHARPENEDGE_AMOUNT;Siła
TP_SHARPENEDGE_LABEL;Krawędzie
@@ -1815,17 +1779,11 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: -
!PREFERENCES_CURVEBBOXPOS_BELOW;Below
!PREFERENCES_CURVEBBOXPOS_LEFT;Left
!PREFERENCES_CURVEBBOXPOS_RIGHT;Right
-!PREFERENCES_D50_OLD;5000K
!PREFERENCES_DIRECTORIES;Directories
!PREFERENCES_EDITORCMDLINE;Custom command line
!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
!PREFERENCES_INSPECT_LABEL;Inspect
!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
@@ -1866,7 +1824,6 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: -
!PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
!PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
!PROFILEPANEL_PDYNAMIC;Dynamic
!PROGRESSBAR_DECODING;Decoding...
!PROGRESSBAR_GREENEQUIL;Green equilibration...
@@ -1936,7 +1893,6 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: -
!TP_DEHAZE_STRENGTH;Strength
!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
!TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominance
@@ -1959,7 +1915,6 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: -
!TP_DIRPYRDENOISE_MEDIAN_METHOD_WEIGHTED;Weighted L* (little) + a*b* (normal)
!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
!TP_DIRPYRDENOISE_TYPE_3X3;3×3
!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
!TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -2022,7 +1977,6 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: -
!TP_RAWCACORR_AUTOIT;Iterations
!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CASTR;Strength
!TP_RAW_1PASSMEDIUM;1-pass (Markesteijn)
!TP_RAW_2PASS;1-pass+fast
!TP_RAW_3PASSBEST;3-pass (Markesteijn)
@@ -2060,15 +2014,12 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: -
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
!TP_RAW_PIXELSHIFTMM_OFF;Off
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -2100,7 +2051,6 @@ ZOOMPANEL_ZOOMOUT;Oddal\nSkrót: -
!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
!TP_RETINEX_GAINTRANSMISSION;Gain transmission
!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
!TP_RETINEX_GAMMA;Gamma
!TP_RETINEX_GAMMA_FREE;Free
!TP_RETINEX_GAMMA_HIGH;High
diff --git a/rtdata/languages/Polish (Latin Characters) b/rtdata/languages/Polish (Latin Characters)
deleted file mode 100644
index 84dcd8c9c..000000000
--- a/rtdata/languages/Polish (Latin Characters)
+++ /dev/null
@@ -1,2341 +0,0 @@
-#01 2007-12-24 Mateusz Ludwin
-#02 2010-01-08 Bartosz "Simek" Kaszubowski
-#03 2011-09-06 Dariusz 'Salvadhor' Duma
-#04 2011-11-30 DrSlony
-#05 2012-01-14 DrSlony
-#06 2012-01-30 DrSlony
-#07 2012-04-02 DrSlony
-#08 2013-05-21 DrSlony
-#09 2014-10-16 DrSlony
-
-ABOUT_TAB_BUILD;Wersja
-ABOUT_TAB_CREDITS;Zaslugi
-ABOUT_TAB_LICENSE;Licencja
-ABOUT_TAB_RELEASENOTES;Notatki eksploatacyjne
-ABOUT_TAB_SPLASH;Ekran powitalny
-BATCHQUEUE_AUTOSTART;Autostart
-BATCHQUEUE_AUTOSTARTHINT;Rozpocznij przetwarzanie automatycznie gdy pojawi sie nowe zadanie.
-BATCHQUEUE_DESTFILENAME;Sciezka i nazwa pliku
-BATCH_PROCESSING;Przetwarzanie wsadowe
-CURVEEDITOR_CURVE;Krzywa
-CURVEEDITOR_CURVES;Krzywe
-CURVEEDITOR_CUSTOM;Wlasna
-CURVEEDITOR_DARKS;Ciemne
-CURVEEDITOR_HIGHLIGHTS;Najjasniejsze
-CURVEEDITOR_LIGHTS;Jasne
-CURVEEDITOR_LINEAR;Liniowa
-CURVEEDITOR_LOADDLGLABEL;Wczytaj krzywa...
-CURVEEDITOR_MINMAXCPOINTS;Ekwalizator
-CURVEEDITOR_NURBS;NURBS
-CURVEEDITOR_PARAMETRIC;Parametryczna
-CURVEEDITOR_SAVEDLGLABEL;Zapisz krzywa...
-CURVEEDITOR_SHADOWS;Najciemniejsze
-CURVEEDITOR_TOOLTIPCOPY;Skopiuj krzywa do schowka
-CURVEEDITOR_TOOLTIPLINEAR;Zresetuj krzywa do liniowej
-CURVEEDITOR_TOOLTIPLOAD;Wczytaj krzywa z pliku
-CURVEEDITOR_TOOLTIPPASTE;Wstaw krzywa ze schowka
-CURVEEDITOR_TOOLTIPSAVE;Zapisz krzywa
-CURVEEDITOR_TYPE;Typ:
-DIRBROWSER_FOLDERS;Katalogi
-EDITWINDOW_TITLE;Edytor obrazu
-EDIT_OBJECT_TOOLTIP;Wyswietla widzet na podgladzie ktory ulatwia ustawienie narzedzia.
-EDIT_PIPETTE_TOOLTIP;Aby dodac punkt do krzywej nalezy trzymac wcisniety klawisz Ctrl podczas klikniecia lewym guzikiem myszki na danym obszarze glownego podgladu.\nAby zmienic ustawienie juz istniejacego punktu, nalezy trzymac wduszony klawisz Ctrl podczas klikniecia lewym guzikiem myszki na danym obszarze glownego podgladu, nastepnie nalezy puscic klawisz Ctrl (chyba ze chodzi nam o bardzo precyzyjne ustawienie dzieki spowolnieniu jakie trzymanie klawisza Ctrl nam daje) i podczas trzymania lewego guzika myszki nalezy myszka ruszac w pionie aby odpowiednio manipulowac punktem w pionie.
-EXIFFILTER_APERTURE;Przyslona
-EXIFFILTER_CAMERA;Aparat
-EXIFFILTER_EXPOSURECOMPENSATION;Korekcja ekspozycji (EV)
-EXIFFILTER_FILETYPE;Typ pliku
-EXIFFILTER_FOCALLEN;Wartosc ogniskowej
-EXIFFILTER_ISO;ISO
-EXIFFILTER_LENS;Obiektyw
-EXIFFILTER_METADATAFILTER;Wlacz filtry metadanych
-EXIFFILTER_SHUTTER;Migawka
-EXIFPANEL_ADDEDIT;Dodaj/Edytuj
-EXIFPANEL_ADDEDITHINT;Dodaje nowa etykiete lub edytuje etykiete
-EXIFPANEL_ADDTAGDLG_ENTERVALUE;Wpisz wartosc
-EXIFPANEL_ADDTAGDLG_SELECTTAG;Wybierz etykiete
-EXIFPANEL_ADDTAGDLG_TITLE;Dodaj/Edytuj etykiete
-EXIFPANEL_KEEP;Zapamietaj
-EXIFPANEL_KEEPHINT;Zapamietuje wybrane etykiety podczas zapisywania pliku wyjsciowego
-EXIFPANEL_REMOVE;Usun
-EXIFPANEL_REMOVEHINT;Usuwa wybrane etykiety podczas zapisywania pliku wyjsciowego
-EXIFPANEL_RESET;Przywroc
-EXIFPANEL_RESETALL;Przywroc wszystkie
-EXIFPANEL_RESETALLHINT;Przywraca orginalne wartosci etykiet
-EXIFPANEL_RESETHINT;Przywraca orginalne wartosci wybranych etykiet
-EXIFPANEL_SUBDIRECTORY;Podkatalog
-EXPORT_BYPASS_ALL;Zaznacz / Odznacz wszystkie
-EXPORT_BYPASS_DEFRINGE;Pomin usuwanie widma
-EXPORT_BYPASS_DIRPYRDENOISE;Pomin redukcje szumow
-EXPORT_BYPASS_DIRPYREQUALIZER;Pomin kontrast wg. poziomu detali
-EXPORT_BYPASS_RAW_CA;Pomin redukcje aberracji chromatycznej (raw)
-EXPORT_BYPASS_RAW_CCSTEPS;Pomin tlumienie falszowania koloru (raw)
-EXPORT_BYPASS_RAW_DCB_ENHANCE;Pomin poprawe DCB (raw)
-EXPORT_BYPASS_RAW_DCB_ITERATIONS;Pomin liczbe powtorzen DCB (raw)
-EXPORT_BYPASS_RAW_DF;Pomin czarna klatke (raw)
-EXPORT_BYPASS_RAW_FF;Pomin puste pole (raw)
-EXPORT_BYPASS_RAW_GREENTHRESH;Pomin wyrownanie zieleni (raw)
-EXPORT_BYPASS_RAW_LINENOISE;Pomin redukcje szumow liniowych (raw)
-EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Pomin poprawe LMMSE [raw]
-EXPORT_BYPASS_SHARPENEDGE;Pomin wyostrzanie krawedzi
-EXPORT_BYPASS_SHARPENING;Pomin wyostrzanie
-EXPORT_BYPASS_SHARPENMICRO;Pomin mikrokontrast
-EXPORT_BYPASS_SH_HQ;Pomin wysokiej jakosci korekte cieni/podswietlen
-EXPORT_FASTEXPORTOPTIONS;Opcje szybkiego eksportu
-EXPORT_INSTRUCTIONS;Opcje szybkiego eksportu umozliwiaja pominiecie pewnych narzedzi ktore moga byc dosc wymagajace na procesor oraz moga znacznie przedluzyc czas przetwarzania podczas eksportowania zdjec. Ta metoda jest zalecana w razie potrzeby szybkiego uzyskania zdjec o nizszej rozdzielczosci oraz jakosci kiedy zalezy nam na czasie a nie chcemy modyfikowac plikow PP3.
-EXPORT_MAXHEIGHT;Maksymalna wysokosc:
-EXPORT_MAXWIDTH;Maksymalna szerokosc:
-EXPORT_PUTTOQUEUEFAST; Dodaj do kolejki szybkiego eksportu
-EXPORT_RAW_DMETHOD;Algorytm demozaikowania
-EXTPROGTARGET_1;raw
-EXTPROGTARGET_2;wywolane w kolejce
-FILEBROWSER_ADDDELTEMPLATE;Dodaj/Usun szablon...
-FILEBROWSER_APPLYPROFILE;Zastosuj profil
-FILEBROWSER_APPLYPROFILE_PARTIAL;Zastosuj czesciowy profil
-FILEBROWSER_AUTODARKFRAME;Automatyczne uzycie czarnej klatki
-FILEBROWSER_AUTOFLATFIELD;Automatyczne uzycie klatki typu puste pole
-FILEBROWSER_BROWSEPATHHINT;Umozliwia przegladanie wprowadzonej sciezki\nCtrl-o zaznaczenie\nEnter, Ctrl-Enter (w menedzerze plikow) przegladanie\nSkroty:\n ~ - katalog domowy uzytkownika\n ! - katalog z obrazami uzytkownia
-FILEBROWSER_CACHE;Pamiec podreczna
-FILEBROWSER_CLEARPROFILE;Wyczysc profil
-FILEBROWSER_COLORLABEL_TOOLTIP;Kolorowe etykiety\n\nUzyj za pomoca rozwijanej listy lub skrotow:\nShift-Ctrl-0 No Color\nShift-Ctrl-1 Czerwona\nShift-Ctrl-2 Zolta\nShift-Ctrl-3 Zielona\nShift-Ctrl-4 Niebieska\nShift-Ctrl-5 Purpurowa
-FILEBROWSER_COPYPROFILE;Kopiuj profil
-FILEBROWSER_CURRENT_NAME;Obecna nazwa:
-FILEBROWSER_DARKFRAME;Czarna klatka
-FILEBROWSER_DELETEDLGLABEL;Potwierdzenie usuniecia pliku
-FILEBROWSER_DELETEDLGMSG;Na pewno usunac zaznaczone %1 plikow?
-FILEBROWSER_DELETEDLGMSGINCLPROC;Na pewno usunac wybrany plik %1 WLACZNIE z wersja utworzona przez kolejke przetwarzania?
-FILEBROWSER_EMPTYTRASH;Wyczysc kosz
-FILEBROWSER_EMPTYTRASHHINT;Definitywnie usuwa pliki z kosza
-FILEBROWSER_EXTPROGMENU;Otworz za pomoca
-FILEBROWSER_FLATFIELD;Puste pole
-FILEBROWSER_MOVETODARKFDIR;Przenies do katalogu zawierajacego czarne klatki
-FILEBROWSER_MOVETOFLATFIELDDIR;Przenies do katalogu zawierajacego puste pola
-FILEBROWSER_NEW_NAME;Nowa nazwa:
-FILEBROWSER_OPENDEFAULTVIEWER;Domyslna przegladarka zdjec (z kolejki)
-FILEBROWSER_PARTIALPASTEPROFILE;Wklej czesciowo
-FILEBROWSER_PASTEPROFILE;Wklej profil
-FILEBROWSER_POPUPCANCELJOB;Anuluj zadanie
-FILEBROWSER_POPUPCOLORLABEL;Kolorowa etykieta
-FILEBROWSER_POPUPCOLORLABEL0;Etykieta: Brak
-FILEBROWSER_POPUPCOLORLABEL1;Etykieta: Czerwona
-FILEBROWSER_POPUPCOLORLABEL2;Etykieta: Zolta
-FILEBROWSER_POPUPCOLORLABEL3;Etykieta: Zielona
-FILEBROWSER_POPUPCOLORLABEL4;Etykieta: Niebieska
-FILEBROWSER_POPUPCOLORLABEL5;Etykieta: Purpurowa
-FILEBROWSER_POPUPCOPYTO;Skopiuj do...
-FILEBROWSER_POPUPFILEOPERATIONS;Operacje na plikach
-FILEBROWSER_POPUPMOVEEND;Przenies na koniec kolejki
-FILEBROWSER_POPUPMOVEHEAD;Przenies na poczatek kolejki
-FILEBROWSER_POPUPMOVETO;Przenies do...
-FILEBROWSER_POPUPOPEN;Otworz
-FILEBROWSER_POPUPOPENINEDITOR;Otworz w edytorze
-FILEBROWSER_POPUPPROCESS;Umiesc w kolejce do przetwarzania
-FILEBROWSER_POPUPPROCESSFAST;Dodaj do kolejki szybkiego eksportu
-FILEBROWSER_POPUPPROFILEOPERATIONS;Profile przetwarzania
-FILEBROWSER_POPUPRANK;Ocena
-FILEBROWSER_POPUPRANK0;Usun ocene
-FILEBROWSER_POPUPRANK1;Ocena 1 *
-FILEBROWSER_POPUPRANK2;Ocena 2 **
-FILEBROWSER_POPUPRANK3;Ocena 3 ***
-FILEBROWSER_POPUPRANK4;Ocena 4 ****
-FILEBROWSER_POPUPRANK5;Ocena 5 *****
-FILEBROWSER_POPUPREMOVE;Usun z dysku
-FILEBROWSER_POPUPREMOVEINCLPROC;Usun z dysku wraz z wynikiem przetwarzania
-FILEBROWSER_POPUPRENAME;Zmien nazwe
-FILEBROWSER_POPUPSELECTALL;Zaznacz wszystkie
-FILEBROWSER_POPUPTRASH;Przenies do kosza
-FILEBROWSER_POPUPUNRANK;Usun ocene
-FILEBROWSER_POPUPUNTRASH;Usun z kosza
-FILEBROWSER_QUERYBUTTONHINT;Wyczysc haslo szukania
-FILEBROWSER_QUERYHINT;Wprowadz czesc nazwy, by zlokalizowac plik. Oddziel hasla przecinkami, np.\n1001,1004,1199\n\nWyklucz hasla poprzedzajac je znakiem !=\nnp.\n!=1001,1004,1199\n\nSkroty:\nCtrl-f - przejdz do pola "Znajdz",\nEnter - szukaj,\nEsc - wyczysc pole "Znajdz",\nShift-Esc - wyjdz z pola "Znajdz".
-FILEBROWSER_QUERYLABEL; Znajdz:
-FILEBROWSER_RANK1_TOOLTIP;Ocen 1 *\nSkrot: Shift-1
-FILEBROWSER_RANK2_TOOLTIP;Ocen 2 *\nSkrot: Shift-2
-FILEBROWSER_RANK3_TOOLTIP;Ocen 3 *\nSkrot: Shift-3
-FILEBROWSER_RANK4_TOOLTIP;Ocen 4 *\nSkrot: Shift-4
-FILEBROWSER_RANK5_TOOLTIP;Ocen 5 *\nSkrot: Shift-5
-FILEBROWSER_RENAMEDLGLABEL;Zmien nazwe pliku
-FILEBROWSER_SELECTDARKFRAME;Wybierz czarna klatke...
-FILEBROWSER_SELECTFLATFIELD;Wybierz puste pole...
-FILEBROWSER_SHOWCOLORLABEL1HINT;Pokazuje zdjecia z czerwona etykieta.\nSkrot: Alt-1
-FILEBROWSER_SHOWCOLORLABEL2HINT;Pokazuje zdjecia z zolta etykieta.\nSkrot: Alt-2
-FILEBROWSER_SHOWCOLORLABEL3HINT;Pokazuje zdjecia z zielona etykieta.\nSkrot: Alt-3
-FILEBROWSER_SHOWCOLORLABEL4HINT;Pokazuje zdjecia z niebieska etykieta.\nSkrot: Alt-4
-FILEBROWSER_SHOWCOLORLABEL5HINT;Pokazuje zdjecia z purpurowa etykieta.\nSkrot: Alt-5
-FILEBROWSER_SHOWDIRHINT;Wylacza wyszstkie filtry.\nSkrot: d
-FILEBROWSER_SHOWEDITEDHINT;Pokazuje edytowane zdjecia.\nSkrot: 7
-FILEBROWSER_SHOWEDITEDNOTHINT;Pokazuje nieedytowane zdjecia.\nSkrot: 6
-FILEBROWSER_SHOWEXIFINFO;Pokaz dane Exif.\n\nSkroty:\ni - Tryb wielu zakladek,\nAlt-i - Tryb jednej zakladki.
-FILEBROWSER_SHOWRANK1HINT;Pokazuje zdjecia ocenione na 1 gwiazdke.\nSkrot: 1
-FILEBROWSER_SHOWRANK2HINT;Pokazuje zdjecia ocenione na 2 gwiazdki.\nSkrot: 2
-FILEBROWSER_SHOWRANK3HINT;Pokazuje zdjecia ocenione na 3 gwiazdki.\nSkrot: 3
-FILEBROWSER_SHOWRANK4HINT;Pokazuje zdjecia ocenione na 4 gwiazdki.\nSkrot: 4
-FILEBROWSER_SHOWRANK5HINT;Pokazuje zdjecia ocenione na 5 gwiazdek.\nSkrot: 5
-FILEBROWSER_SHOWRECENTLYSAVEDHINT;Pokazuje zapisane zdjecia.\nSkrot: Alt-7
-FILEBROWSER_SHOWRECENTLYSAVEDNOTHINT;Pokazuje niezapisane zdjecia.\nSkrot: Alt-6
-FILEBROWSER_SHOWTRASHHINT;Pokazuje zawartosc kosza.\nSkrot: Ctrl-t
-FILEBROWSER_SHOWUNCOLORHINT;Pokazuje zdjecia bez kolorowej etykiety.\nSkrot: Alt-0
-FILEBROWSER_SHOWUNRANKHINT;Pokazuje nieocenione zdjecia.\nSkrot: 0
-FILEBROWSER_THUMBSIZE;Rozmiar minaturek
-FILEBROWSER_UNRANK_TOOLTIP;Usun ocene.\nSkrot: Shift-0
-FILEBROWSER_ZOOMINHINT;Zwieksza rozmiar miniaturek.\n\nSkroty:\n+ - Tryb wielu zakladek,\nAlt-+ - Tryb pojedynczej zakladki.
-FILEBROWSER_ZOOMOUTHINT;Zmniejsza rozmiar miniaturek.\n\nSkroty:\n- - Tryb wielu zakladek,\nAlt-- - Tryb pojedynczej zakladki.
-GENERAL_ABOUT;O programie
-GENERAL_AFTER;Po
-GENERAL_AUTO;Automatyczne
-GENERAL_BEFORE;Przed
-GENERAL_CANCEL;Anuluj
-GENERAL_CLOSE;Zamknij
-GENERAL_DISABLE;Wylacz
-GENERAL_DISABLED;Wylaczone
-GENERAL_ENABLE;Wlacz
-GENERAL_ENABLED;Wlaczone
-GENERAL_FILE;Plik
-GENERAL_LANDSCAPE;Poziomo
-GENERAL_NA;nd.
-GENERAL_NO;Nie
-GENERAL_NONE;Zaden
-GENERAL_OK;OK
-GENERAL_PORTRAIT;Pionowo
-GENERAL_SAVE;Zapisz
-GENERAL_UNCHANGED;(Niezmienione)
-GENERAL_WARNING;Uwaga
-HISTOGRAM_TOOLTIP_B;Pokaz/Ukryj histogram blekitow.
-HISTOGRAM_TOOLTIP_BAR;Pokazuje/Ukrywa wskaznik RGB.\nKlikniecie prawym przyciskiem myszy na podgladzie zdjecia blokuje/odblokowuje.
-HISTOGRAM_TOOLTIP_CHRO;Pokaz/Ukryj histogram chromatycznosci.
-HISTOGRAM_TOOLTIP_FULL;Przelacz histogram pelny (wylaczone)/skalowany (wlaczone).
-HISTOGRAM_TOOLTIP_G;Pokaz/Ukryj histogram zieleni.
-HISTOGRAM_TOOLTIP_L;Pokaz/Ukryj histogram luminancji CIELab.
-HISTOGRAM_TOOLTIP_R;Pokaz/Ukryj histogram czerwieni.
-HISTOGRAM_TOOLTIP_RAW;Pokaz/Ukryj histogram raw.
-HISTORY_CHANGED;Zmieniono
-HISTORY_CUSTOMCURVE;Krzywa wlasna
-HISTORY_FROMCLIPBOARD;Ze schowka
-HISTORY_LABEL;Historia
-HISTORY_MSG_1;Zdjecie zaladowane
-HISTORY_MSG_2;Profil zaladowany
-HISTORY_MSG_3;Profil zmieniony
-HISTORY_MSG_4;Przegladanie historii
-HISTORY_MSG_5;Swiatlosc
-HISTORY_MSG_6;Kontrast
-HISTORY_MSG_7;Czern
-HISTORY_MSG_8;Kompensacja ekspozycji
-HISTORY_MSG_9;Kompresja podswietlen
-HISTORY_MSG_10;Kompresja cieni
-HISTORY_MSG_11;Krzywa tonalna
-HISTORY_MSG_12;Automatyczna ekspozycja
-HISTORY_MSG_13;Przycinanie ekspozycji
-HISTORY_MSG_14;L*a*b* - Swiatlosc
-HISTORY_MSG_15;L*a*b* - Kontrast
-HISTORY_MSG_16;-
-HISTORY_MSG_17;-
-HISTORY_MSG_18;-
-HISTORY_MSG_19;Krzywa L*
-HISTORY_MSG_20;Wyostrzanie
-HISTORY_MSG_21;USM - Promien
-HISTORY_MSG_22;USM - Sila
-HISTORY_MSG_23;USM - Prog wyostrzania
-HISTORY_MSG_24;USM - Wyostrz tylko krawedzie
-HISTORY_MSG_25;USM - Promien detekcji krawedzi
-HISTORY_MSG_26;USM - Tolerancja krawedzi
-HISTORY_MSG_27;USM - Kontrola poswiaty
-HISTORY_MSG_28;USM - Stopien kontroli poswiaty
-HISTORY_MSG_29;Metoda wyostrzania
-HISTORY_MSG_30;RLD - Promien
-HISTORY_MSG_31;RLD - Sila
-HISTORY_MSG_32;RLD - Tlumienie
-HISTORY_MSG_33;RLD - Powtorzenia
-HISTORY_MSG_34;LCP - Korekcja dystorsji
-HISTORY_MSG_35;LCP - Korekcja winietowania
-HISTORY_MSG_36;LCP - Korekcja aberacji
-HISTORY_MSG_37;Automatyczna ekspozycja
-HISTORY_MSG_38;Metoda balansu bieli
-HISTORY_MSG_39;BB - Temperatura
-HISTORY_MSG_40;BB - Odcien
-HISTORY_MSG_41;Tryb krzywej 1
-HISTORY_MSG_42;Krzywa 1
-HISTORY_MSG_43;Tryb krzywej 2
-HISTORY_MSG_44;Odszumianie lum. - Promien
-HISTORY_MSG_45;Odszumianie lum. - Tolerancja krawedzi
-HISTORY_MSG_46;Odszumianie koloru
-HISTORY_MSG_47;Mieszanie podswietlen ICC z matryca
-HISTORY_MSG_48;Uzycie krzywej tonalnej z DCP
-HISTORY_MSG_49;Illuminant DCP
-HISTORY_MSG_50;Cienie/Podswietlenia
-HISTORY_MSG_51;C/P - Podswietlenia
-HISTORY_MSG_52;C/P - Cienie
-HISTORY_MSG_53;C/P - Szerokosc tonalna podsw.
-HISTORY_MSG_54;C/P - Szerokosc tonalna cieni
-HISTORY_MSG_55;C/P - Kontrast lokalny
-HISTORY_MSG_56;C/P - Promien
-HISTORY_MSG_57;Obrot dyskretny
-HISTORY_MSG_58;Odbicie w poziomie
-HISTORY_MSG_59;Odbicie w pionie
-HISTORY_MSG_60;Obrot
-HISTORY_MSG_61;Auto-wypelnianie
-HISTORY_MSG_62;Korekcja dystorsji obiektywu
-HISTORY_MSG_63;Migawka wybrana
-HISTORY_MSG_64;Kadrowanie
-HISTORY_MSG_65;Korekcja aberracji chromatycznej
-HISTORY_MSG_66;Rekonstrukcja przeswietlen
-HISTORY_MSG_67;Rekonstrukcja przeswietlen - Sila
-HISTORY_MSG_68;Rekonstrukcja przeswietlen - Metoda
-HISTORY_MSG_69;Robocza przestrzen kolorow
-HISTORY_MSG_70;Wyjsciowa przestrzen kolorow
-HISTORY_MSG_71;Wejsciowa przestrzen kolorow
-HISTORY_MSG_72;KW - Sila
-HISTORY_MSG_73;Mieszacz kanalow
-HISTORY_MSG_74;Zmiany rozmiaru - Skala
-HISTORY_MSG_75;Zmiany rozmiaru - Metoda
-HISTORY_MSG_76;Metadane Exif
-HISTORY_MSG_77;Metadane IPTC
-HISTORY_MSG_78;-
-HISTORY_MSG_79;Zmiany rozmiaru - Szerokosc
-HISTORY_MSG_80;Zmiany rozmiaru - Wysokosc
-HISTORY_MSG_81;Zmiany rozmiaru
-HISTORY_MSG_82;Profil zmieniony
-HISTORY_MSG_83;C/P - Ostra maska
-HISTORY_MSG_84;Korekcja perspektywy
-HISTORY_MSG_85;LCP
-HISTORY_MSG_86;Krzywe RGB - Tryb luminancji
-HISTORY_MSG_87;Redukcja szumow impulsowych
-HISTORY_MSG_88;RSI - Prog
-HISTORY_MSG_89;Redukcja szumow
-HISTORY_MSG_90;RS - Luminancja
-HISTORY_MSG_91;RS - Chrominancja
-HISTORY_MSG_92;RS - Gamma
-HISTORY_MSG_93;Kontrast wg. poziomu detali
-HISTORY_MSG_94;Kontrast wg. poziomu detali
-HISTORY_MSG_95;L*a*b* - Chromatycznosc
-HISTORY_MSG_96;Krzywa a*
-HISTORY_MSG_97;Krzywa b*
-HISTORY_MSG_98;Algorytm demozaikowania
-HISTORY_MSG_99;Filtrowanie goracych pikseli
-HISTORY_MSG_100;Nasycenie RGB
-HISTORY_MSG_101;HSV - Odcien
-HISTORY_MSG_102;HSV - Nasycenie
-HISTORY_MSG_103;HSV - Mocy swiatla bialego
-HISTORY_MSG_104;Ekwalizator HSV
-HISTORY_MSG_105;Usuwanie widma
-HISTORY_MSG_106;Usuwanie widma - Promien
-HISTORY_MSG_107;Usuwanie widma - Prog
-HISTORY_MSG_108;Prog kompresji przeswietlen
-HISTORY_MSG_109;Zmiana rozmiaru - Wymiary obwodu
-HISTORY_MSG_110;Zmiana rozmiaru dotyczy
-HISTORY_MSG_111;L*a*b* - Unikaj przycinania koloru
-HISTORY_MSG_112;-
-HISTORY_MSG_113;L*a*b* - Ograniczenie nasyczenia
-HISTORY_MSG_114;DCB - Liczba powtorzen
-HISTORY_MSG_115;DCB - Zapobieganie falszowaniu koloru
-HISTORY_MSG_116;DCB - Ulepszone
-HISTORY_MSG_117;Korekcja aberracji raw - Czerwona
-HISTORY_MSG_118;Korekcja aberracji raw - Niebieska
-HISTORY_MSG_119;Redukcja szumow liniowych
-HISTORY_MSG_120;Wyrownanie zieleni
-HISTORY_MSG_121;Autokorekcja aberracji chromatycznej
-HISTORY_MSG_122;Czarna klatka - Auto-wybor
-HISTORY_MSG_123;Czarna klatka - Wybor
-HISTORY_MSG_124;Korekcja punktu bieli
-HISTORY_MSG_126;Puste pole - Wybor
-HISTORY_MSG_127;Puste pole - Auto-wybor
-HISTORY_MSG_128;Puste pole - Promien rozmycia
-HISTORY_MSG_129;Puste pole - Typ rozmycia
-HISTORY_MSG_130;Automatyczna korekcja dystorsji
-HISTORY_MSG_131;RS - Luma
-HISTORY_MSG_132;RS - Chroma
-HISTORY_MSG_133;Gamma wyjsciowa
-HISTORY_MSG_134;Wolna gamma
-HISTORY_MSG_135;Wolna gamma
-HISTORY_MSG_136;Nachylenie gamma
-HISTORY_MSG_137;Poziom czerni - Zielony 1
-HISTORY_MSG_138;Poziom czerni - Czerwony
-HISTORY_MSG_139;Poziom czerni - Niebieski
-HISTORY_MSG_140;Poziom czerni - Zielony 2
-HISTORY_MSG_141;Poziom czerni - Polacz zielone
-HISTORY_MSG_142;WK - Powtorzenia
-HISTORY_MSG_143;WK - Sila
-HISTORY_MSG_144;Mikrokontrast - Sila
-HISTORY_MSG_145;Mikrokontrast - Jednolitosc
-HISTORY_MSG_146;Wyostrzanie krawedzi
-HISTORY_MSG_147;Wyostrzanie krawedzi - tylko luminacja
-HISTORY_MSG_148;Mikrokontrast
-HISTORY_MSG_149;Mikrokontrast - matryca 3×3
-HISTORY_MSG_150;Redukcja szumu i artefaktow po demozaikowaniu
-HISTORY_MSG_151;Jaskrawosc
-HISTORY_MSG_152;Jaskrawosc - Ppastelowe
-HISTORY_MSG_153;Jaskrawosc - Nasycone
-HISTORY_MSG_154;Jaskrawosc - Chron odcienie skory
-HISTORY_MSG_155;Jaskrawosc - Zapobiegaj zmianom kolorow
-HISTORY_MSG_156;Jaskrawosc - Polacz pastelowe i nasycone
-HISTORY_MSG_157;Jaskrawosc - Prog pastelowych/nasyconych
-HISTORY_MSG_158;TM - Sila
-HISTORY_MSG_159;TM - Wyszukanie krawedzi
-HISTORY_MSG_160;TM - Skala
-HISTORY_MSG_161;TM - Powtarzanie rozwazania
-HISTORY_MSG_162;Tone Mapping
-HISTORY_MSG_163;Krzywe RGB - Czerwona
-HISTORY_MSG_164;Krzywe RGB - Zielona
-HISTORY_MSG_165;Krzywe RGB - Niebieska
-HISTORY_MSG_167;Algorytm demozaikowania
-HISTORY_MSG_168;L*a*b* - Krzywa CC
-HISTORY_MSG_169;L*a*b* - Krzywa CH
-HISTORY_MSG_170;Jaskrawosc - Krzywa HH
-HISTORY_MSG_171;L*a*b* - Krzywa LC
-HISTORY_MSG_172;L*a*b* - Ogranicz LC
-HISTORY_MSG_174;CIECAM02
-HISTORY_MSG_175;CAM02 - Adaptacja CAT02
-HISTORY_MSG_176;CAM02 - Otoczenie
-HISTORY_MSG_177;CAM02 - Luminancja sceny
-HISTORY_MSG_178;CAM02 - Luminancja widowni
-HISTORY_MSG_179;CAM02 - Model punktu bieli
-HISTORY_MSG_180;CAM02 - Swiatlosc (J)
-HISTORY_MSG_181;CAM02 - Chroma (C)
-HISTORY_MSG_182;CAM02 - Automatyczne CAT02
-HISTORY_MSG_183;CAM02 - Kontrast (J)
-HISTORY_MSG_184;CAM02 - Otoczenie sceny
-HISTORY_MSG_185;CAM02 - Kontrola gamma
-HISTORY_MSG_186;CAM02 - Algorytm
-HISTORY_MSG_187;CAM02 - Ochrona czerwieni/skory
-HISTORY_MSG_188;CAM02 - Jasnosc (Q)
-HISTORY_MSG_189;CAM02 - Kontrast (Q)
-HISTORY_MSG_190;CAM02 - Nasycenie (S)
-HISTORY_MSG_191;CAM02 - Barwistosc (M)
-HISTORY_MSG_192;CAM02 - Odcien (hue, h)
-HISTORY_MSG_193;CAM02 - Krzywa tonalna 1
-HISTORY_MSG_194;CAM02 - Krzywa tonalna 2
-HISTORY_MSG_195;CAM02 - Krzywa tonalna 1
-HISTORY_MSG_196;CAM02 - Krzywa tonalna 2
-HISTORY_MSG_197;CAM02 - Krzywa koloru
-HISTORY_MSG_198;CAM02 - Krzywa koloru
-HISTORY_MSG_199;CAM02 - Histogramy wyjsciowe
-HISTORY_MSG_200;CAMO2 - Tone mapping
-HISTORY_MSG_201;RS - Chrominancja - R&G
-HISTORY_MSG_202;RS - Chrominancja - B&Y
-HISTORY_MSG_204;Kroki poprawy LMMSE
-HISTORY_MSG_205;CAM02 - Gorace/uszkodzone px
-HISTORY_MSG_206;CAT02 - Auto luminancja sceny
-HISTORY_MSG_207;Usuwanie widma - Krzywa odcieni
-HISTORY_MSG_208;BB - Ekwalizator N/C
-HISTORY_MSG_210;FP - Kat
-HISTORY_MSG_211;Filtr Polowkowy
-HISTORY_MSG_212;Winietowanie - Sila
-HISTORY_MSG_213;Winietowanie
-HISTORY_MSG_214;Czarno-biale (B&W)
-HISTORY_MSG_215;B&W - MK - Czerwony
-HISTORY_MSG_216;B&W - MK - Zielony
-HISTORY_MSG_217;B&W - MK - Niebieski
-HISTORY_MSG_218;B&W - Gamma - Czerwony
-HISTORY_MSG_219;B&W - Gamma - Zielony
-HISTORY_MSG_220;B&W - Gamma - Niebieski
-HISTORY_MSG_221;B&W - Filtr barwny
-HISTORY_MSG_222;B&W - Ustawienia
-HISTORY_MSG_223;B&W - MK - Pomaranczowy
-HISTORY_MSG_224;B&W - MK - Zolty
-HISTORY_MSG_225;B&W - MK - Cyjanowy
-HISTORY_MSG_226;B&W - MK - Magenta
-HISTORY_MSG_227;B&W - MK - Purpurowy
-HISTORY_MSG_228;B&W - Ekwalizator luminancji
-HISTORY_MSG_229;B&W - Ekwalizator luminancji
-HISTORY_MSG_230;B&W - Tryb
-HISTORY_MSG_231;B&W - Krzywa 'Przed'
-HISTORY_MSG_232;B&W - Rodzaj krzywej 'Przed'
-HISTORY_MSG_233;B&W - Krzywa 'Po'
-HISTORY_MSG_234;B&W - Rodzaj krzywej 'Po'
-HISTORY_MSG_236;-
-HISTORY_MSG_238;FP - Wtapianie
-HISTORY_MSG_239;FP - Sila
-HISTORY_MSG_240;FP - Srodek
-HISTORY_MSG_241;Winietowanie - Wtapianie
-HISTORY_MSG_242;Winietowanie - Okraglosc
-HISTORY_MSG_243;Winietowanie - Promien
-HISTORY_MSG_244;Winietowanie - Sila
-HISTORY_MSG_245;Winietowanie - Srodek
-HISTORY_MSG_246;Krzywa CL
-HISTORY_MSG_247;Krzywa LH
-HISTORY_MSG_248;Krzywa HH
-HISTORY_MSG_249;KwgPS - Prog
-HISTORY_MSG_250;RS - Ulepszona
-HISTORY_MSG_251;B&W - Algorytm
-HISTORY_MSG_252;KwgPS - Odcienie skory
-HISTORY_MSG_253;KwgPS - Redukcja bledow
-HISTORY_MSG_254;KwgPS - Odcienie skory
-HISTORY_MSG_255;RS - Filtr mediana
-HISTORY_MSG_257;Koloryzacja
-HISTORY_MSG_258;Koloryzacja - Kolor
-HISTORY_MSG_259;Koloryzacja - Przezroczystosc
-HISTORY_MSG_260;Koloryzacja - Przezroczystosc a*[b*]
-HISTORY_MSG_261;Koloryzacja - Metoda
-HISTORY_MSG_262;Koloryzacja - Przezroczystosc b*
-HISTORY_MSG_263;Koloryzacja - Cienie - Czerwony
-HISTORY_MSG_264;Koloryzacja - Cienie - Zielony
-HISTORY_MSG_265;Koloryzacja - Cienie - Niebiski
-HISTORY_MSG_266;Koloryzacja - Þolcienie - Czerwone
-HISTORY_MSG_267;Koloryzacja - Þolcienie - Zielone
-HISTORY_MSG_268;Koloryzacja - Þolcienie - Niebieskie
-HISTORY_MSG_269;Koloryzacja - Podswietlenia - Czerwone
-HISTORY_MSG_270;Koloryzacja - Podswietlenia - Zielona
-HISTORY_MSG_271;Koloryzacja - Podswietlenia - Niebieskie
-HISTORY_MSG_272;Koloryzacja - Balans
-HISTORY_MSG_274;Koloryzacja - Nasycenie cieni
-HISTORY_MSG_275;Koloryzacja - Nasycenie jasnych
-HISTORY_MSG_276;Koloryzacja - Przezroczystosc
-HISTORY_MSG_277;--unused--
-HISTORY_MSG_278;Koloryzacja - Zachowaj luminancje
-HISTORY_MSG_279;Koloryzacja - Cienie
-HISTORY_MSG_280;Koloryzacja - Tony jasne
-HISTORY_MSG_281;Koloryzacja - Sila nasycenia
-HISTORY_MSG_282;Koloryzacja - Prog nasycenia
-HISTORY_MSG_283;Koloryzacja - Sila
-HISTORY_MSG_284;Koloryzacja - Auto ochrona przesycenia
-HISTORY_MSG_285;RS - Mediana - Metoda
-HISTORY_MSG_286;RS - Mediana - Typ
-HISTORY_MSG_287;RS - Mediana - Powtarzanie
-HISTORY_MSG_288;Puste pole - Zabezp. przed obcinaniem
-HISTORY_MSG_289;Puste pole - Auto-zabezp. przed obcinaniem
-HISTORY_MSG_290;Prog czerni - Czerwony
-HISTORY_MSG_291;Prog czerni - Zielony
-HISTORY_MSG_292;Prog czerni - Niebieski
-HISTORY_MSG_293;Symulacja Kliszy
-HISTORY_MSG_294;Symulacja Kliszy - Sila
-HISTORY_MSG_295;Symulacja Kliszy - Klisza
-HISTORY_MSG_296;RS - Modulacja luminancji
-HISTORY_MSG_298;Filtrowanie martwych pikseli
-HISTORY_NEWSNAPSHOT;Nowa migawka
-HISTORY_NEWSNAPSHOT_TOOLTIP;Skrot: Alt-s
-HISTORY_SNAPSHOT;Migawka
-HISTORY_SNAPSHOTS;Migawki
-IPTCPANEL_CATEGORY;Kategoria
-IPTCPANEL_CITY;Miasto
-IPTCPANEL_COPYHINT;Kopiuje ustawienia IPTC do schowka
-IPTCPANEL_COUNTRY;Kraj
-IPTCPANEL_CREDIT;Zasluga
-IPTCPANEL_CREDITHINT;Identyfikuje dostawce zdjecia, niekoniecznie wlasciciela lub autora (Credit).
-IPTCPANEL_DATECREATED;Data utworzenia
-IPTCPANEL_EMBEDDED;Osadzony
-IPTCPANEL_EMBEDDEDHINT;Resetuje dane IPTC do domyslnych ustawien osadzonych w orginalnym zdjeciu
-IPTCPANEL_HEADLINE;Naglowek
-IPTCPANEL_INSTRUCTIONS;Instrukcje
-IPTCPANEL_KEYWORDS;Slowa kluczowe
-IPTCPANEL_PASTEHINT;Wstawia ustawienia IPTC ze schowka
-IPTCPANEL_RESET;Reset
-IPTCPANEL_RESETHINT;Resetuje do domyslnych ustawien profilu
-IPTCPANEL_SOURCE;Zrodlo
-IPTCPANEL_TITLE;Tytul
-MAIN_BUTTON_FULLSCREEN;Pelen ekran
-MAIN_BUTTON_NAVNEXT_TOOLTIP;Przejdz do nastepnego zdjecia wzgledem zdjecia otwartego w Edytorze.\nSkrot: Shift-F4\n\nAby przejsc do nastepnego zdjecia wzgledem miniaturki wybranej w Nawigatorze Zdjec:\nSkrot: F4
-MAIN_BUTTON_NAVPREV_TOOLTIP;Przejdz do poprzedniego zdjecia wzgledem zdjecia otwartego w Edytorze.\nSkrot: Shift-F3 \n\nAby przejsc do poprzedniego zdjecia wzgledem miniaturki wybranej w Nawigatorze Zdjec:\nSkrot: F3
-MAIN_BUTTON_NAVSYNC_TOOLTIP;Synchronizuj Nawigator Zdjec z Edytorem aby ukazac miniaturke obecnie otwartego zdjecia, oraz usun filtry w Nawigatorze Zdjec.\nSkrot: x\n\nJak wyzej, ale bez usuwania filtrow:\nSkrot: y\n(Miniaturka otwartego zdjecia nie zostanie wyswietlona jesli filtr ja ukrywa).
-MAIN_BUTTON_PREFERENCES;Ustawienia
-MAIN_BUTTON_PUTTOQUEUE_TOOLTIP;Dodaj biezace zdjecie do kolejki przetwarzania Ctrl+B
-MAIN_BUTTON_SAVE_TOOLTIP;Zapisz biezace zdjecieCtrl+S
-MAIN_BUTTON_SENDTOEDITOR_TOOLTIP;Otworz biezace zdjecie w zewnetrznym edytorze.\nSkrot: Ctrl+e
-MAIN_BUTTON_SHOWHIDESIDEPANELS_TOOLTIP;Pokaz/Ukryj wszystkie panele boczne.\nSkrot: m
-MAIN_BUTTON_UNFULLSCREEN;Zwolnij ekran
-MAIN_FRAME_BATCHQUEUE;Kolejka
-MAIN_FRAME_BATCHQUEUE_TOOLTIP;Przetwarzanie wsadowe\nSkrot: Ctrl-F3
-MAIN_FRAME_EDITOR;Edytor
-MAIN_FRAME_EDITOR_TOOLTIP;Edytor.\nSkrot: Ctrl-F4
-MAIN_FRAME_FILEBROWSER;Przegladarka plikow
-MAIN_FRAME_FILEBROWSER_TOOLTIP; Przegladarka plikow.\nSkrot: Ctrl-F2
-MAIN_FRAME_PLACES;Miejsca
-MAIN_FRAME_PLACES_ADD;Dodaj
-MAIN_FRAME_RECENT;Ostatnio uzywane foldery
-MAIN_MSG_ALREADYEXISTS;Plik juz istnieje.
-MAIN_MSG_CANNOTLOAD;Nie mozna wczytac obrazu
-MAIN_MSG_CANNOTSAVE;Blad zapisu pliku
-MAIN_MSG_CANNOTSTARTEDITOR;Nie mozna uruchomic edytora.
-MAIN_MSG_CANNOTSTARTEDITOR_SECONDARY;Prosze wprowadzic prawidlowa sciezke w Ustawieniach.
-MAIN_MSG_EMPTYFILENAME;Nie podano nazwy pliku!
-MAIN_MSG_IMAGEUNPROCESSED;Ta komenda wymaga aby wszystkie wybrane zdjecia byly wpierw wywolane poprzez kolejke.
-MAIN_MSG_NAVIGATOR;Nawigator
-MAIN_MSG_OPERATIONCANCELLED;Operacje anulowano
-MAIN_MSG_PATHDOESNTEXIST;Sciezka\n\n%1\n\nnie istnieje. Wybierz przawidlowa sciezke w Ustawieniach.
-MAIN_MSG_QOVERWRITE;Zastapic?
-MAIN_MSG_SETPATHFIRST;Aby uzyc tej funkcji nalezy wpierw wybrac odpowiednia sciezke docelowa w Ustawieniach!
-MAIN_MSG_WRITEFAILED;Zapis nie powiodl sie:\n\n"%1"\n\nUpewnij sie, ze folder istnieje oraz ze mozna do niego zapisywac.
-MAIN_TAB_COLOR;Kolor
-MAIN_TAB_COLOR_TOOLTIP;Skrot: Alt-c
-MAIN_TAB_DETAIL;Szczegoly
-MAIN_TAB_DETAIL_TOOLTIP;Skrot: Alt-d
-MAIN_TAB_DEVELOP; Przetwarzanie
-MAIN_TAB_EXIF;Exif
-MAIN_TAB_EXPORT; Szybki eksport
-MAIN_TAB_EXPOSURE;Ekspozycja
-MAIN_TAB_EXPOSURE_TOOLTIP;Skrot: Alt-e
-MAIN_TAB_FILTER; Filtr
-MAIN_TAB_IPTC;IPTC
-MAIN_TAB_METADATA;Metadane
-MAIN_TAB_METADATA_TOOLTIP;Skrot: Alt-m
-MAIN_TAB_RAW;Raw
-MAIN_TAB_RAW_TOOLTIP;Skrot: Alt-r
-MAIN_TAB_TRANSFORM;Transformacje
-MAIN_TAB_TRANSFORM_TOOLTIP;Skrot: Alt-t
-MAIN_TOOLTIP_BACKCOLOR0;Kolor tla podgladu: Tematyczny\nSkrot: 9
-MAIN_TOOLTIP_BACKCOLOR1;Kolor tla podgladu: Czarny\nSkrot: 9
-MAIN_TOOLTIP_BACKCOLOR2;Kolor tla podgladu: Bialy\nSkrot: 9
-MAIN_TOOLTIP_BEFOREAFTERLOCK;Zablokuj / Odblokuj widok Przed\n\nZablokuj: nie zmieniaj widoku Przed - \nPrzydatne w porownywaniu zablokowanego obrazu z obrazem na ktorym wykonano wiele zmian.\n\nOdblokuj: widok Przed bedzie sledzil widok Po o jeden krok do tylu, pokazujac obraz przed efektem aktualnie uzytego narzedzia.
-MAIN_TOOLTIP_HIDEHP;Pokaz/ukryj lewy panel (razem z historia).\nSkrot: l
-MAIN_TOOLTIP_INDCLIPPEDH;Pokaz obciete przeswietlenia.\nSkrot: <
-MAIN_TOOLTIP_INDCLIPPEDS;Pokaz obciete niedoswietlenia.\nSkrot: >
-MAIN_TOOLTIP_PREVIEWB;Podglad kanalu niebieskiego.\nSkrot: b
-MAIN_TOOLTIP_PREVIEWFOCUSMASK;Podglad maski ostrosci.\nSkrot: Shift-f\n\nDokladniejsze w przypadku zdjec o plytkiej glebi ostrosci, niskim pozimie szumow i o wiekszym przyblizeniu. W przypadku zdjec o wyzszym poziomie szumow maska ostrosci bedzie dokladniejsza przy mniejszym zoomie (10-30%).
-MAIN_TOOLTIP_PREVIEWG;Podglad kanalu zielonego.\nSkrot: g
-MAIN_TOOLTIP_PREVIEWL;Podglad kanalu jasnosci.\nSkrot: v\n\n0.299*R + 0.587*G + 0.114*B
-MAIN_TOOLTIP_PREVIEWR;Podglad kanalu czerwonego.\nSkrot: r
-MAIN_TOOLTIP_QINFO;Informacje o zdjeciu.\nSkrot: i
-MAIN_TOOLTIP_SHOWHIDELP1;Pokaz/Ukryj lewy panel.\nSkrot: l
-MAIN_TOOLTIP_SHOWHIDERP1;Pokaz/Ukryj prawy panel.\nSkrot: Alt-l
-MAIN_TOOLTIP_SHOWHIDETP1;Pokaz/Ukryj gorny panel.\nSkrot: Shift-l
-MAIN_TOOLTIP_THRESHOLD;Prog
-MAIN_TOOLTIP_TOGGLE;Przelacz widok Przed/Po.\nSkrot: Shift-b
-NAVIGATOR_B;B:
-NAVIGATOR_G;G:
-NAVIGATOR_H;H:
-NAVIGATOR_LAB_A;a*:
-NAVIGATOR_LAB_B;b*:
-NAVIGATOR_LAB_L;L*:
-NAVIGATOR_NA; --
-NAVIGATOR_R;R:
-NAVIGATOR_S;S:
-NAVIGATOR_V;V:
-NAVIGATOR_XY_FULL;Szerokosc: %1, Wysokosc: %2
-NAVIGATOR_XY_NA;x: --, y: --
-PARTIALPASTE_BASICGROUP;Podstawowe ustawienia
-PARTIALPASTE_CACORRECTION;Korekcja aberacji chr.
-PARTIALPASTE_CHANNELMIXER;Mieszacz kanalow
-PARTIALPASTE_CHANNELMIXERBW;Czarno-biale
-PARTIALPASTE_COARSETRANS;Obrot dyskretny / odbicie
-PARTIALPASTE_COLORAPP;CIECAM02
-PARTIALPASTE_COLORGROUP;Ustawienia zwiazane z kolorem
-PARTIALPASTE_COLORTONING;Koloryzacja
-PARTIALPASTE_COMMONTRANSFORMPARAMS;Auto-wypelnianie
-PARTIALPASTE_COMPOSITIONGROUP;Ustawienia kompozycji
-PARTIALPASTE_CROP;Kadrowanie
-PARTIALPASTE_DARKFRAMEAUTOSELECT;Auto-wybor czarnej klatki
-PARTIALPASTE_DARKFRAMEFILE;Wybor czarnej klatki
-PARTIALPASTE_DEFRINGE;Usuwanie widma
-PARTIALPASTE_DETAILGROUP;Ustawienia szczegolowe
-PARTIALPASTE_DIALOGLABEL;Czesciowe wklejenie profilu przetwarzania
-PARTIALPASTE_DIRPYRDENOISE;Redukcja szumu
-PARTIALPASTE_DIRPYREQUALIZER;Kontrast wg. poziomu detali
-PARTIALPASTE_DISTORTION;Korekcja znieksztalcenia
-PARTIALPASTE_EPD;Tone Mapping
-PARTIALPASTE_EVERYTHING;Wszystko
-PARTIALPASTE_EXIFCHANGES;Exif
-PARTIALPASTE_EXPOSURE;Ekspozycja
-PARTIALPASTE_FILMSIMULATION;Symulacja kliszy
-PARTIALPASTE_FLATFIELDAUTOSELECT;Puste pole - Auto-wybor
-PARTIALPASTE_FLATFIELDBLURRADIUS;Puste pole - Promien
-PARTIALPASTE_FLATFIELDBLURTYPE;Puste pole - Typ
-PARTIALPASTE_FLATFIELDCLIPCONTROL;Puste pole - Zabezp. przed obcinaniem
-PARTIALPASTE_FLATFIELDFILE;Puste pole - Wybor
-PARTIALPASTE_GRADIENT;Filtr polowkowy
-PARTIALPASTE_HSVEQUALIZER;Ekwalizator HSV
-PARTIALPASTE_ICMSETTINGS;Ustawienia ICM
-PARTIALPASTE_IMPULSEDENOISE;Redukcja szumow impulsowych
-PARTIALPASTE_IPTCINFO;IPTC
-PARTIALPASTE_LABCURVE;Regulacje L*a*b*
-PARTIALPASTE_LENSGROUP;Ustawienia zwiazane z obiektywem
-PARTIALPASTE_LENSPROFILE;Profil korekcji obiektywu LCP
-PARTIALPASTE_METAGROUP;Metadane
-PARTIALPASTE_PCVIGNETTE;Winietowanie
-PARTIALPASTE_PERSPECTIVE;Perspektywa
-PARTIALPASTE_PREPROCESS_DEADPIXFILT;Filtr martwych pikseli
-PARTIALPASTE_PREPROCESS_GREENEQUIL;Wyrownanie zieleni
-PARTIALPASTE_PREPROCESS_HOTPIXFILT;Filtr goracych pikseli
-PARTIALPASTE_PREPROCESS_LINEDENOISE;Redukcja szumow liniowych
-PARTIALPASTE_RAWCACORR_AUTO;Autokorekcja aberracji chr.
-PARTIALPASTE_RAWEXPOS_BLACK;Poziomy czerni
-PARTIALPASTE_RAWEXPOS_LINEAR;Korekcja punktu bieli
-PARTIALPASTE_RAWGROUP;Ustawienia raw
-PARTIALPASTE_RAW_DCBENHANCE;Zastosuj poprawe DCB
-PARTIALPASTE_RAW_DCBITERATIONS;Liczba powtorzen DCB
-PARTIALPASTE_RAW_DMETHOD;Algorytm demozaikowania
-PARTIALPASTE_RAW_FALSECOLOR;Tlumienie falszowania koloru
-PARTIALPASTE_RAW_LMMSEITERATIONS;Kroki poprawy LMMSE
-PARTIALPASTE_RESIZE;Zmiana rozmiaru
-PARTIALPASTE_RGBCURVES;Krzywe RGB
-PARTIALPASTE_ROTATION;Obrot
-PARTIALPASTE_SHADOWSHIGHLIGHTS;Cienie/Podswietlenia
-PARTIALPASTE_SHARPENEDGE;Krawedzie
-PARTIALPASTE_SHARPENING;Wyostrzanie
-PARTIALPASTE_SHARPENMICRO;Mikrokontrast
-PARTIALPASTE_VIBRANCE;Jaskrawosc
-PARTIALPASTE_VIGNETTING;Korekcja winietowania
-PARTIALPASTE_WHITEBALANCE;Balans bieli
-PREFERENCES_ADD;Dodaj
-PREFERENCES_APPEARANCE_NAVGUIDECOLOR;Kolor ramki Nawigatora
-PREFERENCES_APPLNEXTSTARTUP;wymaga ponownego uruchomienia
-PREFERENCES_AUTOMONPROFILE;Automatycznie uzyj systemowego profilu monitora
-PREFERENCES_BATCH_PROCESSING;Przetwarzanie wsadowe
-PREFERENCES_BEHADDALL;'Dodaj' wszystkie
-PREFERENCES_BEHADDALLHINT;Ustaw wszystkie narzedzia w tryb Dodaj.\nZmiany parametrow w panelu edycji zbiorczej zostana traktowane jako roznice do poprzednich wartosci.
-PREFERENCES_BEHAVIOR;Zachowanie
-PREFERENCES_BEHSETALL;'Ustaw' wszystkie
-PREFERENCES_BEHSETALLHINT;Ustaw wszystkie narzedzia w tryb Ustaw.\nZmiany parametrow w panelu edycji zbiorczej zostana traktowane jako absolutne, nie biorac pod uwage poprzednich wartosci.
-PREFERENCES_BLACKBODY;Wolfram
-PREFERENCES_CACHEMAXENTRIES;Maksymalna liczba wpisow w pamieci podrecznej
-PREFERENCES_CACHEOPTS;Opcje pamieci podrecznej
-PREFERENCES_CACHETHUMBHEIGHT;Maksymalna wysokosc miniatury
-PREFERENCES_CLIPPINGIND;Pokazywanie obcietych przeswietlen/cieni
-PREFERENCES_CLUTSDIR;Folder obrazow HaldCLUT
-PREFERENCES_CUSTPROFBUILD;Zewnetrzny kreator profilow przetwarzania
-PREFERENCES_CUSTPROFBUILDHINT;Plik wykonywalny (lub skrypt) uruchamiany kiedy trzeba wygenerowac profil przetwarzania dla zdjecia.\n\nSciezka pliku nosnego (w stylu *.ini czyli sekcje i klucze/parametry) wystepuje jako parametr wiersza polecen. Plik ten zawiera przerozne parametry oraz dane Exif dzieki ktorym odpowiedni program badz skrypt moze wygenerowac plik PP3 wedlug regul.\n\nUWAGA: Twoja odpowiedzialnoscia jest prawidlowe uzycie cudzyslowiow w przypadku sciezek zawierajacych spacje i znaki specjalne.
-PREFERENCES_CUSTPROFBUILDKEYFORMAT;Rodzaj kluczy
-PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Nazwa
-PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
-PREFERENCES_CUSTPROFBUILDPATH;Sciezka pliku wykonywalnego
-PREFERENCES_D50;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
-PREFERENCES_DARKFRAMEFOUND;Znaleziono
-PREFERENCES_DARKFRAMESHOTS;zdjec(ia)
-PREFERENCES_DARKFRAMETEMPLATES;szablonow(ny)
-PREFERENCES_DATEFORMAT;Format daty
-PREFERENCES_DATEFORMATHINT;Dozwolone sa nastepujace kody formatujace:\n%y - rok\n%m - miesiac\n%d - dzien\n\nNa przyklad wedlug standardu ISO 8601 format daty wyglada nastepujaco:\n%y-%m-%d
-PREFERENCES_DIRDARKFRAMES;Katalog z czarnymi klatkami
-PREFERENCES_DIRHOME;Katalog domowy
-PREFERENCES_DIRLAST;Ostatnio odwiedzony katalog
-PREFERENCES_DIROTHER;Inny
-PREFERENCES_DIRSELECTDLG;Wybierz katalog z obrazami po uruchomieniu...
-PREFERENCES_DIRSOFTWARE;Katalog instalacyjny
-PREFERENCES_EDITORLAYOUT;Uklad edytora
-PREFERENCES_EXTERNALEDITOR;Zewnetrzny edytor
-PREFERENCES_FBROWSEROPTS;Opcje przegladarki plikow
-PREFERENCES_FILEFORMAT;Format pliku
-PREFERENCES_FLATFIELDFOUND;Znaleziono
-PREFERENCES_FLATFIELDSDIR;Katalog z pustymi polami
-PREFERENCES_FLATFIELDSHOTS;kadry
-PREFERENCES_FLATFIELDTEMPLATES;szablony
-PREFERENCES_FLUOF2;Fluorescent F2
-PREFERENCES_FLUOF7;Fluorescent F7
-PREFERENCES_FLUOF11;Fluorescent F11
-PREFERENCES_FORIMAGE;Dla zdjec innych niz raw
-PREFERENCES_FORRAW;Dla zdjec raw
-PREFERENCES_GIMPPATH;Katalog, w ktorym zainstalowany jest GIMP
-PREFERENCES_GREY;Luminancja Yb urzadzenia wyjsciowego (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram w lewym panelu
-PREFERENCES_HISTOGRAMWORKING;Zastosuj profil roboczy do obliczenia glownego histogramu i Nawigatora
-PREFERENCES_HISTOGRAM_TOOLTIP;Jesli opcja jest wlaczona profil roboczy jest uzyty do obliczenia glownego histogramu oraz panelu Nawigatora, inaczej profil wyjsciowy z korekta gamma zostanie uzyty.
-PREFERENCES_HLTHRESHOLD;Prog dla przeswietlen
-PREFERENCES_ICCDIR;Katalog z profilami koloru ICC
-PREFERENCES_IMPROCPARAMS;Domyslne parametry przetwarzania obrazu
-PREFERENCES_INTENT_ABSOLUTE;Absolutnie kolorymetryczny
-PREFERENCES_INTENT_PERCEPTUAL;Percepcyjny
-PREFERENCES_INTENT_RELATIVE;Wzglednie kolorymetryczny
-PREFERENCES_INTENT_SATURATION;Nasyceniowy
-PREFERENCES_INTERNALTHUMBIFUNTOUCHED;Pokaz osadzona miniature JPEG jesli plik raw jest nieedytowany
-PREFERENCES_LANGAUTODETECT;Uzyj jezyka systemowego
-PREFERENCES_MENUGROUPEXTPROGS;Grupuj "Otworz za pomoca"
-PREFERENCES_MENUGROUPFILEOPERATIONS;Grupuj operacje plikow
-PREFERENCES_MENUGROUPLABEL;Grupuj operacje etykiet
-PREFERENCES_MENUGROUPPROFILEOPERATIONS;Grupuj operacje profili przetwarzania
-PREFERENCES_MENUGROUPRANK;Grupuj operacje oceny
-PREFERENCES_MENUOPTIONS;Opcje menu
-PREFERENCES_METADATA;Metadane
-PREFERENCES_MULTITAB;Tryb wielu zakladek
-PREFERENCES_MULTITABDUALMON;Tryb wielu zakladek (na drugim monitorze jesli dostepny)
-PREFERENCES_OUTDIR;Katalog wyjsciowy
-PREFERENCES_OUTDIRFOLDER;Zapisz do katalogu
-PREFERENCES_OUTDIRFOLDERHINT;Umieszcza zapisywane zdjecia w wybranym katalogu
-PREFERENCES_OUTDIRTEMPLATE;Uzyj schemat
-PREFERENCES_OUTDIRTEMPLATEHINT;Dozwolone sa nastepujace kody formatujace:\n%f, %d1, %d2, ..., %p1, %p2, ..., %r, %s1, %s2, ...\n\nKody formatujace odnosza sie do roznych elementow sciezki zdjecia, atrybutow zdjecia oraz do arbitralnego ciagu numerycznego operacji wsadowej.\n\nPrzykladowo, jesli zdjecie obrabiane ma nastepujaca sciezke:\n/home/andrzej/zdjecia/2010-10-31/dsc0042.nef\nznaczenie kodow formatujacych jest nastepujace:\n%d4 = home\n%d3 = andrzej\n%d2 = zdjecia\n%d1 = 2010-10-31\n%f = dsc0042\n%p1 = /home/tom/photos/2010-10-31/\n%p2 = /home/andrzej/zdjecia/\n%p3 = /home/andrzej/\n%p4 = /home/\n\n%r zostanie zastapione ocena zdjecia. Jesli zdjecie nie posiada oceny, %r zostanie zastapione liczba '0'. Jesli zdjecie lezy w smietniku, %r zostanie zastapione znakiem 'x'.\n\n%s1, %s2, etc. zostanie zastapione ciagniem numerycznym dopelnionym od jednej do dziewieciu cyfr. Ciag ten zostanie rozpoczniety od "1" za kazdym razem gdy kolejka przetwarzania zostanie uruchomiona, i liczba jest zwiekszona o "1" dla kazdego zapisanego obrazu.\n\nJesli chcesz zapisac obraz wyjsciowy obok obrazu wejsciowego, napisz:\n%p1/%f\n\nJesli chcesz zapisac obraz wyjsciowy w folderze o nazwie "wywolane" znajdujacego sie w katalogu zawierajacym otwarty obraz, napisz:\n%p1/wywolane/%f\n\nJesli chcesz zapisac obraz wyjsciowy w folderze o nazwie "/home/andrzej/zdjecia/wywolane/2010-10-31", napisz:\n%p2/wywolane/%d1/%f
-PREFERENCES_OVERLAY_FILENAMES;Nakladaj nazwy pliku na miniatury
-PREFERENCES_OVERWRITEOUTPUTFILE;Nadpisuj istniejace pliki
-PREFERENCES_PANFACTORLABEL;Wspolczynnik
-PREFERENCES_PARSEDEXT;Przetwarzane rozszerzenia
-PREFERENCES_PARSEDEXTADD;Dodaj rozszerzenie
-PREFERENCES_PARSEDEXTADDHINT;Prosze wprowadzic rozszerzenie i zatwierdzic przyciskiem, by dodac do listy
-PREFERENCES_PARSEDEXTDELHINT;Skasuje wybrane rozszerzenie z listy
-PREFERENCES_PROFILEHANDLING;Obsluga profili
-PREFERENCES_PROFILELOADPR;Priorytet wczytywania profilu
-PREFERENCES_PROFILEPRCACHE;Profil w pamieci podrecznej
-PREFERENCES_PROFILEPRFILE;Profil przy pliku wejsciowym
-PREFERENCES_PROFILESAVECACHE;Zapisz parametry przetwarzania w pamieci podrecznej
-PREFERENCES_PROFILESAVEINPUT;Zapisz parametry przetwarzania obok pliku wejsciowego
-PREFERENCES_PROPERTY;Wlasnosc
-PREFERENCES_PSPATH;Katalog w ktorym zainstalowany jest Adobe Photoshop
-PREFERENCES_SELECTLANG;Wybierz jezyk
-PREFERENCES_SET;Ustaw
-PREFERENCES_SHOWBASICEXIF;Pokaz podstawowe dane Exif
-PREFERENCES_SHOWDATETIME;Pokaz date i czas
-PREFERENCES_SHOWEXPOSURECOMPENSATION;Pokaz korekte ekspozycji
-PREFERENCES_SHTHRESHOLD;Prog dla niedoswietlen
-PREFERENCES_SINGLETAB;Tryb pojedynczej zakladki
-PREFERENCES_SINGLETABVERTAB;Tryb pojedynczej zakladki, pionowy uklad
-PREFERENCES_SND_BATCHQUEUEDONE;Zakonczono przetwarzanie wsadowe
-PREFERENCES_SND_HELP;Nalezy wprowadzic sciezke do pliku, badz pozostawic niewypelnione (brak dzwiekow).\nW systemie Windows mozna stosowac "SystemDefault", "SystemAsterisk" itp. dla dzwiekow systemowych.\nW systemie Linux mozna stosowac "complete", "window-attention" etc. dla dzwiekow systemowych.
-PREFERENCES_SND_LNGEDITPROCDONE;Praca edytora wykonana
-PREFERENCES_SND_THRESHOLDSECS;po sekundach
-PREFERENCES_STARTUPIMDIR;Katalog startowy
-PREFERENCES_TAB_BROWSER;Przegladarka plikow
-PREFERENCES_TAB_COLORMGR;Zarzadzanie kolorami
-PREFERENCES_TAB_GENERAL;Ogolne
-PREFERENCES_TAB_IMPROC;Przetwarzanie obrazu
-PREFERENCES_TAB_SOUND;Dzwieki
-PREFERENCES_TP_LABEL;Panel narzedzi:
-PREFERENCES_TP_VSCROLLBAR;Ukry pionowy pasek przesuwania
-PREFERENCES_USEBUNDLEDPROFILES;Uzyj zalaczone profile przetwarzania
-PREFERENCES_VIEW;Balans bieli urzadzenia wyjsciowego (monitora, TV, projektora, widowni, etc.)
-PREFERENCES_WORKFLOW;Tok pracy
-PROFILEPANEL_COPYPPASTE;Parametry do skopiowania
-PROFILEPANEL_GLOBALPROFILES;Zalaczone profile przetwarzania
-PROFILEPANEL_LABEL;Profil przetwarzania
-PROFILEPANEL_LOADDLGLABEL;Wczytaj profil przetwarzania koncowego...
-PROFILEPANEL_LOADPPASTE;Parametry do zaladowania
-PROFILEPANEL_MODE_TIP;Tryb wypelnienia parametrow przetwarzania.\n\nWduszone: czesciowe profile zostana przetworzone w profile pelne; brakujace wartosci zostana wypelnione domyslnymi, zakodowanymi w silniku RawTherapee.\n\nWylaczone: profile zostana zastosowane takie, jakie sa, zmieniajac tylko te wartosci, ktore zawieraja.
-PROFILEPANEL_MYPROFILES;Moje profile przetwarzania
-PROFILEPANEL_PASTEPPASTE;Parametry do wklejenia
-PROFILEPANEL_PCUSTOM;Wlasny
-PROFILEPANEL_PFILE;Z pliku
-PROFILEPANEL_PINTERNAL;Neutralny
-PROFILEPANEL_PLASTSAVED;Ostatnio zapisany
-PROFILEPANEL_SAVEDLGLABEL;Zapisz profil przetwarzania...
-PROFILEPANEL_SAVEPPASTE;Parametry do zapisania
-PROFILEPANEL_TOOLTIPCOPY;Skopiuj aktualny profil do schowka
-PROFILEPANEL_TOOLTIPLOAD;Laduj profil z pliku.\nCtrl+klik aby wybrac parametry do ladowania.
-PROFILEPANEL_TOOLTIPPASTE;Wklej profil ze schowka.\nCtrl+klik aby wybrac parametry do wklejenia.
-PROFILEPANEL_TOOLTIPSAVE;Zapisz aktualny profil.\nCtrl+klik aby wybrac parametry do zapisania.
-PROGRESSBAR_LOADING;Wczytywanie obrazu...
-PROGRESSBAR_LOADINGTHUMBS;Wczytywanie miniatur...
-PROGRESSBAR_LOADJPEG;Ladowanie pliku JPEG...
-PROGRESSBAR_LOADPNG;Ladowanie pliku PNG...
-PROGRESSBAR_LOADTIFF;Ladowanie pliku TIFF...
-PROGRESSBAR_NOIMAGES;Nie znaleziono zadnych obrazow
-PROGRESSBAR_PROCESSING;Przetwarzanie obrazu...
-PROGRESSBAR_PROCESSING_PROFILESAVED;Zapisano profil przetwarzania
-PROGRESSBAR_READY;Gotowe
-PROGRESSBAR_SAVEJPEG;Zapisywanie pliku JPEG...
-PROGRESSBAR_SAVEPNG;Zapisywanie pliku PNG...
-PROGRESSBAR_SAVETIFF;Zapisywanie pliku TIFF...
-PROGRESSBAR_SNAPSHOT_ADDED;Dodano migawke
-PROGRESSDLG_PROFILECHANGEDINBROWSER;Profil zmieniony w przegladarce
-QINFO_ISO;ISO
-QINFO_NOEXIF;Dane Exif niedostepne.
-SAVEDLG_AUTOSUFFIX;Automatycznie dodaj przyrostek, jezeli plik juz istnieje
-SAVEDLG_FILEFORMAT;Format pliku
-SAVEDLG_FORCEFORMATOPTS;Wymus opcje zapisu
-SAVEDLG_JPEGQUAL;Jakosc JPEG
-SAVEDLG_PNGCOMPR;Kompresja PNG
-SAVEDLG_PUTTOQUEUE;Umiesc w kolejce przetwarzania
-SAVEDLG_PUTTOQUEUEHEAD;Umiesc na poczatku kolejki przetwarzania
-SAVEDLG_PUTTOQUEUETAIL;Umiesc na koncu kolejki przetwarzania
-SAVEDLG_SAVEIMMEDIATELY;Zapisz natychmiast
-SAVEDLG_SAVESPP;Zapisz parametry przetwarzania wraz z obrazem
-SAVEDLG_SUBSAMP;Subsampling
-SAVEDLG_SUBSAMP_1;Najlepsza kompresja
-SAVEDLG_SUBSAMP_2;Pomiedzy
-SAVEDLG_SUBSAMP_3;Najlepsza jakosc
-SAVEDLG_TIFFUNCOMPRESSED;Nieskompresowany TIFF
-SAVEDLG_WARNFILENAME;Plik zostanie nazwany
-SHCSELECTOR_TOOLTIP;Kliknij prawym przyciskiem myszki aby zresetowac poycje trzech suwakow.
-THRESHOLDSELECTOR_B;Dolny
-THRESHOLDSELECTOR_BL;Dolny lewy
-THRESHOLDSELECTOR_BR;Dolny prawy
-THRESHOLDSELECTOR_HINT;Uzyj Shift aby przesuwac poszczegolne punkty kontrolne.
-THRESHOLDSELECTOR_T;Top
-THRESHOLDSELECTOR_TL;Gorny lewy
-THRESHOLDSELECTOR_TR;Gorny prawy
-TOOLBAR_TOOLTIP_CROP;Kadruj.\nSkrot: c\nMozna przesuwac obszar kadrowania za pomoca Shift-przeciagniecia myszki
-TOOLBAR_TOOLTIP_HAND;Przesun.\nSkrot: h
-TOOLBAR_TOOLTIP_STRAIGHTEN;Wyprostuj / obroc.\nSkrot: s\n\nWyznacz pionowa lub pozioma poprzez narysowanie linii prowadnicy na podgladzie. Kat obrotu zostanie pokazany obok linii prowadnicy. Punktem obrotu jest geometryczny srodek obrazu.
-TOOLBAR_TOOLTIP_WB;Wskaz balans bieli.\nSkrot: w
-TP_BWMIX_ALGO;Algorytm PZCRM
-TP_BWMIX_ALGO_LI;Liniowy
-TP_BWMIX_ALGO_SP;Efekty specjalne
-TP_BWMIX_ALGO_TOOLTIP;Liniowy: mieszanie kanalow liniowo.\nEfekty specjalne: kanaly zostana mieszane nieliniowo.
-TP_BWMIX_AUTOCH;Auto
-TP_BWMIX_CC_ENABLED;Dopasuj barwy dopelniajace
-TP_BWMIX_CC_TOOLTIP;Wlacz aby umozliwic automatyczne dopasowanie barw dopelniajacych w trybie CPZZCNPM.
-TP_BWMIX_CHANNEL;Ekwalizator luminancji
-TP_BWMIX_CURVEEDITOR1;Krzywa 'Przed'
-TP_BWMIX_CURVEEDITOR2;Krzywa 'Po'
-TP_BWMIX_CURVEEDITOR_AFTER_TOOLTIP;Krzywa po konwersji obrazu na czarnobialy.
-TP_BWMIX_CURVEEDITOR_BEFORE_TOOLTIP;Krzywa przed konwersja obrazu na czarnobialy.\nWspolczynniki koloru moga miec wplyw.
-TP_BWMIX_CURVEEDITOR_LH_TOOLTIP;Luminancja wedlug odcieni (hue) L=f(H).\nNalezy zwrocic uwage na ekstremalne ustawienia poniewaz moga pojawic sie znieksztalcenia sygnalu w obrazie.
-TP_BWMIX_FILTER;Filtr barwny
-TP_BWMIX_FILTER_BLUE;Niebieski
-TP_BWMIX_FILTER_BLUEGREEN;Niebieski-Zielony
-TP_BWMIX_FILTER_GREEN;Zielony
-TP_BWMIX_FILTER_GREENYELLOW;Zielony-Zolty
-TP_BWMIX_FILTER_NONE;Brak
-TP_BWMIX_FILTER_PURPLE;Purpurowy
-TP_BWMIX_FILTER_RED;Czerwony
-TP_BWMIX_FILTER_REDYELLOW;Czerwony-Zolty
-TP_BWMIX_FILTER_TOOLTIP;Filtr barwny symuluje dzialanie prawdziwego filtru barwnego usytuowanego przed obiektywem. Filtry barwne obnizaja transmitancje specyficznych kolorow a zatem maja wplyw na ich jasnosc, np. filtr czerwony przyciemnia niebieskie niebo.
-TP_BWMIX_FILTER_YELLOW;Zolty
-TP_BWMIX_GAMMA;Korekcja gamma
-TP_BWMIX_GAM_TOOLTIP;Korekcja gamma dla kazdego kanalu RGB.
-TP_BWMIX_LABEL;Czarno-Bialy
-TP_BWMIX_MET;Metoda
-TP_BWMIX_MET_CHANMIX;Mieszacz kanalow
-TP_BWMIX_MET_DESAT;Desaturacja
-TP_BWMIX_MET_LUMEQUAL;Ekwalizator luminancji
-TP_BWMIX_RGBLABEL;R: %1%% G: %2%% B: %3%% Total: %4%%
-TP_BWMIX_RGBLABEL_HINT;Ostateczne wartosci RGB ktore uwzgledniaja wszystkie opcje mieszacza.\n"Total" wyswietla sume wartosci RGB:\n- zawsze 100% w trybie relatywnym,\n- ponad (jasniej) lub ponizej (ciemniej) 100% w trybie absolutnym.
-TP_BWMIX_RGB_TOOLTIP;Miesza kanaly RGB. Kieruj sie gotowymi ustawieniami.\nNalezy zwrocic uwage na ujemne wartosci poniewaz moga pojawic sie znieksztalcenia sygnalu w obrazie lub dzialac w sposob nieprzewidywalny.
-TP_BWMIX_SETTING;Gotowe ustawienia
-TP_BWMIX_SETTING_TOOLTIP;Rozne gotowe ustawienia (klisza, krajobraz, etc.) oraz recznie ustawienia mieszacza kanalow.
-TP_BWMIX_SET_HIGHCONTAST;Wysoki kontrast
-TP_BWMIX_SET_HIGHSENSIT;Wysoka czulosc
-TP_BWMIX_SET_HYPERPANCHRO;Hyper Panchromatic
-TP_BWMIX_SET_INFRARED;Podczerwien
-TP_BWMIX_SET_LANDSCAPE;Krajobraz
-TP_BWMIX_SET_LOWSENSIT;Niska czulosc
-TP_BWMIX_SET_LUMINANCE;Luminancja
-TP_BWMIX_SET_NORMCONTAST;Normalny kontrast
-TP_BWMIX_SET_ORTHOCHRO;Orthochromatic
-TP_BWMIX_SET_PANCHRO;Panchromatic
-TP_BWMIX_SET_PORTRAIT;Portret
-TP_BWMIX_SET_RGBABS;Absolutny RGB
-TP_BWMIX_SET_RGBREL;Relatywny RGB
-TP_BWMIX_SET_ROYGCBPMABS;Absolutny CPZZCNPM
-TP_BWMIX_SET_ROYGCBPMREL;Relatywny CPZZCNPM
-TP_BWMIX_TCMODE_FILMLIKE;B&W Klisza
-TP_BWMIX_TCMODE_SATANDVALBLENDING;B&W Mieszanie Nasycenia i Mocy Swiatla Bialego
-TP_BWMIX_TCMODE_STANDARD;B&W Standardowa
-TP_BWMIX_TCMODE_WEIGHTEDSTD;B&W Wazona Standardowa
-TP_BWMIX_VAL;L
-TP_CACORRECTION_BLUE;Niebieski
-TP_CACORRECTION_LABEL;Korekcja aberracji chromatycznej
-TP_CACORRECTION_RED;Czerwony
-TP_CHMIXER_BLUE;Niebieski
-TP_CHMIXER_GREEN;Zielony
-TP_CHMIXER_LABEL;Mieszacz kanalow
-TP_CHMIXER_RED;Czerwony
-TP_CHROMATABERR_LABEL;Aberracja chromatyczna
-TP_COARSETRAF_TOOLTIP_HFLIP;Odbij w poziomie
-TP_COARSETRAF_TOOLTIP_ROTLEFT;Obroc w lewo.\n\nSkroty:\n[ - Tryb wielu zakladek,\nAlt-[ - Tryb jednej zakladki.
-TP_COARSETRAF_TOOLTIP_ROTRIGHT;Obroc w prawo.\n\nSkroty:\n] - Tryb wielu zakladek,\nAlt-] - Tryb jednej zakladki.
-TP_COARSETRAF_TOOLTIP_VFLIP;Odbij w pionie
-TP_COLORAPP_ALGO;Algorytm
-TP_COLORAPP_ALGO_ALL;Wszystkie
-TP_COLORAPP_ALGO_JC;Swiatlosc + Chroma (JC)
-TP_COLORAPP_ALGO_JS;Swiatlosc + Nasycenie (JS)
-TP_COLORAPP_ALGO_QM;Jasnosc + Barwistosc (QM)
-TP_COLORAPP_ALGO_TOOLTIP;Umozliwia wybor wszystkich parametrow lub ich podzespol.
-TP_COLORAPP_BADPIXSL;Filtr pikseli goracych/uszkodzonych
-TP_COLORAPP_BADPIXSL_TOOLTIP;Usuwanie goracych/uszkodzonych (swiecacych) pikseli.\n0 = Wylaczone\n1 = Metoda Mediana\n2 = Metoda Gaussa.\nMozna rowniez dostroic zdjecie tak, aby unikac bardzo ciemnych miejsc.\n\nTe anomalie wynikaja z limitacji CIECAM02.
-TP_COLORAPP_BRIGHT;Jasnosc (Q)
-TP_COLORAPP_BRIGHT_TOOLTIP;Jasnosc w CIECAM02 bierze pod uwage luminancje bieli i rozni sie od jasnosci L*a*b* oraz RGB.
-TP_COLORAPP_CHROMA;Chroma (C)
-TP_COLORAPP_CHROMA_M;Barwistosc (M)
-TP_COLORAPP_CHROMA_M_TOOLTIP;Barwistosc w CIECAM02 rozni sie od barwistosci L*a*b* oraz RGB.
-TP_COLORAPP_CHROMA_S;Nasycenie (S)
-TP_COLORAPP_CHROMA_S_TOOLTIP;Nasycenie w CIECAM02 rozni sie od nasycenia L*a*b* oraz RGB.
-TP_COLORAPP_CHROMA_TOOLTIP;Chroma w CIECAM02 rozni sie od chromy L*a*b* oraz RGB.
-TP_COLORAPP_CIECAT_DEGREE;Adaptacja CAT02
-TP_COLORAPP_CONTRAST;Kontrast (J)
-TP_COLORAPP_CONTRAST_Q;Kontrast (Q)
-TP_COLORAPP_CONTRAST_Q_TOOLTIP;Kontrast w CIECAM02 dla suwaka Q rozni sie od kontrastu L*a*b* oraz RGB.
-TP_COLORAPP_CONTRAST_TOOLTIP;Kontrast w CIECAM02 dla suwaka J rozni sie od kontrastu L*a*b* oraz RGB.
-TP_COLORAPP_CURVEEDITOR1;Krzywa tonalna 1
-TP_COLORAPP_CURVEEDITOR1_TOOLTIP;Pokazuje histogram L* (L*a*b*) przed CIECAM02.\nJesli opcja "Pokaz histogramy wyjsciowe CIECAM02 za krzywymi" jest wlaczona, pokazuje histogram J i Q po CIECAM02.\n\nJ i Q nie sa pokazywane w glownym histogramie.\n\nEfekt koncowy jest przedstawiony w glownym histogramie.
-TP_COLORAPP_CURVEEDITOR2;Krzywa tonalna 2
-TP_COLORAPP_CURVEEDITOR2_TOOLTIP;Tak samo dziala jak krzywa tonalna 1.
-TP_COLORAPP_CURVEEDITOR3;Krzywa koloru
-TP_COLORAPP_CURVEEDITOR3_TOOLTIP;Ustawienie chromy, nasycenia badz barwistosci.\n\nPokazuje histogram chromatycznosci (L*a*b*) przed CIECAM02.\nJesli opcja "Pokaz histogramy wyjsciowe CIECAM02 za krzywymi" jest wlaczona, pokazuje histogram C, s badz M po CIECAM02.\n\nC, s oraz M nie sa pokazywane w glownym histogramie.\nEfekt koncowy jest przedstawiony w glownym histogramie.
-TP_COLORAPP_DATACIE;Pokaz histogramy wyjsciowe CIECAM02 za krzywymi
-TP_COLORAPP_DATACIE_TOOLTIP;Kiedy opcja jest wlaczona, histogramy za krzywymi CIECAM02 pokazuja przyblizone wartosci/zakresy J lub Q, oraz C, s lub M po korekcjach CIECAM02.\nTen wybor nie ma wplywu na glowny histogram.\n\nKiedy opcja jest wylaczona, histogramy za krzywymi CIECAM02 pokazuja wartosci L*a*b* przed korekcjami CIECAM02.
-TP_COLORAPP_GAMUT;Kontrola gamma (L*a*b*).
-TP_COLORAPP_GAMUT_TOOLTIP;Wlacz kontrole gamma w trybie L*a*b*.
-TP_COLORAPP_HUE;Odcien (hue, h)
-TP_COLORAPP_HUE_TOOLTIP;Odcien (hue, h) - kat pomiedzy 0° a 360°.
-TP_COLORAPP_LABEL;CIE Color Appearance Model 2002
-TP_COLORAPP_LABEL_CAM02;Ustawienia Obrazu
-TP_COLORAPP_LABEL_SCENE;Ustawienia Sceny
-TP_COLORAPP_LABEL_VIEWING;Wlasnosci Widowni
-TP_COLORAPP_LIGHT;Swiatlosc (J)
-TP_COLORAPP_LIGHT_TOOLTIP;Swiatlosc w CIECAM02 rozni sie od swiatlosci CIELab oraz RGB
-TP_COLORAPP_MODEL;Model PB
-TP_COLORAPP_MODEL_TOOLTIP;Model punktu bieli.\n\nBB [RT] + [wyjsciowy]:\nBalans bieli RawTherapee jest uzyty dla sceny, CIECAM02 jest ustawione na D50, i balans bieli urzadzenia wyjsciowego ustawiony jest w Ustawieniach > Zarzadzanie Kolorami\n\nBB [RT+CAT02] + [wyjsciowe]:\nUstawienia balansu bieli RawTherapee sa uzywane przez CAT02, i balans bieli urzadzenia wyjsciowego jest ustawione w Ustawieniach > Zarzadzanie Kolorami.
-TP_COLORAPP_RSTPRO;Ochrona odcieni skory i czerwieni
-TP_COLORAPP_RSTPRO_TOOLTIP;Ochrona odcieni skory i czerwieni (suwaki i krzywe)
-TP_COLORAPP_SURROUND;Otoczenie
-TP_COLORAPP_SURROUND_AVER;Srednie
-TP_COLORAPP_SURROUND_DARK;Ciemne
-TP_COLORAPP_SURROUND_DIM;Przycmione
-TP_COLORAPP_SURROUND_EXDARK;Bardzo Ciemne (Cut-sheet)
-TP_COLORAPP_SURROUND_TOOLTIP;Zmienia barwy i kolory aby wziac pod uwage wlasnosci widowni urzadzenia wyjsciowego.\n\nSrednie:\nSrednie swiatlo otoczenia (standardowe). Obraz sie nie zmieni.\n\nPrzycmione:\nPrzycmione otoczenie (TV). Obraz stanie sie troszke ciemniejszy.\n\nCiemne:\nCiemne otoczenie (projektor). Obraz stanie sie jeszcze ciemniejszy.\n\nBardzo Ciemne:\nBardzo ciemne otoczenie (cut-sheet). Obraz stanie sie bardzo ciemny.
-TP_COLORAPP_SURSOURCE;Ciemne otoczenie
-TP_COLORAPP_SURSOURCE_TOOLTIP;Mozna uzyc kiedy np. obraz wejsciowy ma ciemne krawedzie.
-TP_COLORAPP_TCMODE_BRIGHTNESS;Jasnosc
-TP_COLORAPP_TCMODE_CHROMA;Chroma
-TP_COLORAPP_TCMODE_COLORF;Barwistosc
-TP_COLORAPP_TCMODE_LABEL1;Tryb krzywej 1
-TP_COLORAPP_TCMODE_LABEL2;Tryb krzywej 2
-TP_COLORAPP_TCMODE_LABEL3;Tryb krzywej chromy
-TP_COLORAPP_TCMODE_LIGHTNESS;Swiatlosc
-TP_COLORAPP_TCMODE_SATUR;Nasycenie
-TP_COLORAPP_TONECIE;Tone mapping za pomoca jasnosci CIECAM02 (Q)
-TP_COLORAPP_TONECIE_TOOLTIP;Jesli ta opcja jest wylaczona, tone mapping odbywa sie w przestrzeni kolorow L*a*b*, zas jesli jest wlaczona, w przestrzeni kolorow CIECAM02.\nNarzedzie Tone Mapping musi byc wlaczone aby to utawienie dzialalo.
-TP_COLORAPP_VIEWING_ABSOLUTELUMINANCE_TOOLTIP;Bezwzgledna luminancja widowni\n(zazwyczaj 16cd/m²).
-TP_COLORAPP_WBCAM;BB [RT+CAT02] + [wyjsciowy]
-TP_COLORAPP_WBRT;BB [RT] + [wyjsciowy]
-TP_COLORTONING_AB;o C/L
-TP_COLORTONING_AUTOSAT;Automatyczna
-TP_COLORTONING_BALANCE;Balans
-TP_COLORTONING_BY;o C/L
-TP_COLORTONING_CHROMAC;Przezroczystosc
-TP_COLORTONING_COLOR;Kolor
-TP_COLORTONING_CURVEEDITOR_CL_TOOLTIP;Przezroczystosc chromy wedlug luminancji oC=f(L)
-TP_COLORTONING_HIGHLIGHT;Podswietlenia
-TP_COLORTONING_HUE;Odcien (hue)
-TP_COLORTONING_LAB;Mieszanie L*a*b*
-TP_COLORTONING_LABEL;Koloryzacja
-TP_COLORTONING_LUMA;Luminancja
-TP_COLORTONING_LUMAMODE;Zachowaj luminancje
-TP_COLORTONING_LUMAMODE_TOOLTIP;Luminancja zostanie zachowana przy zmianie kolorow.
-TP_COLORTONING_METHOD;Metoda
-TP_COLORTONING_METHOD_TOOLTIP;"Mieszanie L*a*b*", "Suwaki RGB" oraz "Krzywe RGB" stosuja interpolacje do mieszania kolorow.\n"Balansowanie kolorow (cienie, polcienie, podswietlenia)" oraz "Nasycenie - Dwa Kolory" stosuja kolory bezposrednio.\n\nNarzedzie "Czarno-biale" mozna uzywac jednoczesnie z narzedziem "Koloryzacji", co umozliwi tonowanie zdjecia.
-TP_COLORTONING_MIDTONES;Polcienie
-TP_COLORTONING_NEUTRAL;Zresetuj suwaki
-TP_COLORTONING_NEUTRAL_TIP;Zresetuj wszystkie wartosci (cienie, polcienie, podswietlenia) na domyslne.
-TP_COLORTONING_OPACITY;Przezroczystosc
-TP_COLORTONING_RGBCURVES;RGB - Krzywe
-TP_COLORTONING_RGBSLIDERS;RGB - Suwaki
-TP_COLORTONING_SA;Ochrona przed przesyceniem
-TP_COLORTONING_SATURATEDOPACITY;Sila
-TP_COLORTONING_SATURATIONTHRESHOLD;Prog
-TP_COLORTONING_SHADOWS;Cienie
-TP_COLORTONING_SPLITCO;Cienie/polcienie/podswietlenia
-TP_COLORTONING_SPLITCOCO;Balans kolorow - cienie/polcienie/podswietlenia
-TP_COLORTONING_SPLITLR;Nasycenie - dwa kolory
-TP_COLORTONING_STR;Sila
-TP_COLORTONING_STRENGTH;Sila
-TP_COLORTONING_TWO2;Specjalna chroma 'dwa kolory'
-TP_COLORTONING_TWOALL;Specjalna chroma
-TP_COLORTONING_TWOBY;Specjalne a* i b*
-TP_COLORTONING_TWOCOLOR_TOOLTIP;Standardowa chroma:\nLiniowe mieszanie kanalow, a* = b*.\n\nSpecjalna chroma:\nLiniowe mieszanie kanalow, a* = b*, ale nieograniczone - sprobuj krzywa zagiac pod przekatna.\n\nSpecialne a* i b*:\nLiniowe nieograniczone mieszanie kanalow z osobnymi krzywymi dla a* i b*. Przeznaczone dla efektow specjalnych.\n\nSpecjalna chroma - dwa kolory:\nBardziej nieprzewidywalne.
-TP_COLORTONING_TWOSTD;Standardowa chroma
-TP_CROP_FIXRATIO;Zablokuj proporcje
-TP_CROP_GTDIAGONALS;Przekatna
-TP_CROP_GTEPASSPORT;Paszport biometryczny
-TP_CROP_GTFRAME;Ramka
-TP_CROP_GTGRID;Siatka
-TP_CROP_GTNONE;Nic
-TP_CROP_GTRULETHIRDS;Trojpodzial
-TP_CROP_GUIDETYPE;Typ pomocy:
-TP_CROP_H;Wysokosc
-TP_CROP_LABEL;Kadrowanie
-TP_CROP_W;Szerokosc
-TP_CROP_X;X
-TP_CROP_Y;Y
-TP_DARKFRAME_AUTOSELECT;Autowybor
-TP_DARKFRAME_LABEL;Czarna klatka
-TP_DEFRINGE_LABEL;Usuwanie widma
-TP_DEFRINGE_RADIUS;Promien
-TP_DEFRINGE_THRESHOLD;Prog
-TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominancja - Blekit-zolc
-TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Chrominancja - Glowna
-TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominancja - Czerwien-zielen
-TP_DIRPYRDENOISE_ENH;Tryb ulepszony
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Ulepsza jakosc usuwania szumow kosztem okolo 20% wzrostu czasu przetwarzania.
-TP_DIRPYRDENOISE_LUMINANCE_CURVE;Krzywa luminancji
-TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Szczegolowosc luminancji
-TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminacja
-TP_DIRPYRDENOISE_MAIN_COLORSPACE;Metoda
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_LABEL;Redukcja szumu
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;Dla obrazow raw mozna uzywac metody RGB oraz L*a*b*.\n\nDla obrazow nie-raw metoda L*a*b* zostanie uzyta niezaleznie od wyboru.
-TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
-TP_DIRPYRDENOISE_MAIN_GAMMA_TOOLTIP;Gamma skupia sile redukcji szumow na danym predziale zakresu tonalnego. Mniejsze wartosci gamma powoduja skupienie na ciemniejszych barwach, natomiast wieksze wartosci rozciagna zakres dzialania rowniez na barwy jasne.
-TP_DIRPYRDENOISE_MAIN_MODE;Jakosc
-TP_DIRPYRDENOISE_MAIN_MODE_AGGRESSIVE;Wysoka
-TP_DIRPYRDENOISE_MAIN_MODE_CONSERVATIVE;Standardowa
-TP_DIRPYRDENOISE_MAIN_MODE_TOOLTIP;Jakosc moze zostac dopasowana do wzoru szumow. Ustawienie "wysoka" ulepsza odszumianie okolo 20% wzrostu czasu przetwarzania.
-TP_DIRPYRDENOISE_MEDIAN_METHOD;Metoda mediana
-TP_DIRPYRDENOISE_MEDIAN_METHOD_LAB;L*a*b*
-TP_DIRPYRDENOISE_MEDIAN_METHOD_LABEL;Filtr Mediana
-TP_DIRPYRDENOISE_MEDIAN_METHOD_LUMINANCE;Tylko luminancja
-TP_DIRPYRDENOISE_MEDIAN_METHOD_RGB;RGB
-TP_DIRPYRDENOISE_MEDIAN_METHOD_TOOLTIP;Przy uzyciu metod "tylko luminancja" oraz "L*a*b*", filtrowanie mediana zostanie wykonane prosto po funkcji falki w procesie odszumiania.\nW trybie "RGB" filtrowanie to zostanie wykonana pod koniec calego procesu.
-TP_DIRPYRDENOISE_MEDIAN_PASSES;Liczba powtorzen mediana
-TP_DIRPYRDENOISE_MEDIAN_TYPE;Rodzaj mediana
-TP_DIRPYREQUALIZER_ALGO;Zakres odcieni skory
-TP_DIRPYREQUALIZER_ALGO_TOOLTIP;-
-TP_DIRPYREQUALIZER_HUESKIN;Odcien skory
-TP_DIRPYREQUALIZER_HUESKIN_TOOLTIP;Piramida wyznacza zakres kolorow uwazany jako zakres odcieni skory. Wiekszosc odcieni skory - bialej, czarnej, i pomiedzy - ma te sama odcien. Male poprawki sa dopuszczalne, jednak jesli potrzebna jest wieksza zmiana w lewo lub prawo, lub jesli sa widoczne artefakty, to najprawdopobniej balans bieli jest niepoprawny.
-TP_DIRPYREQUALIZER_LABEL;Kontrast wg. precyzji detali
-TP_DIRPYREQUALIZER_LUMACOARSEST;Zgrubne
-TP_DIRPYREQUALIZER_LUMACONTRAST_MINUS;Kontrast-
-TP_DIRPYREQUALIZER_LUMACONTRAST_PLUS;Kontrast+
-TP_DIRPYREQUALIZER_LUMAFINEST;Delikatne
-TP_DIRPYREQUALIZER_LUMANEUTRAL;Neutralne
-TP_DIRPYREQUALIZER_SKIN;Ochrona/celowanie odcieni skory
-TP_DIRPYREQUALIZER_SKIN_TOOLTIP;Przy -100 oddzialywanie efektu odbywa sie wylacznie na odcieniach skory.\nPrzy 0 oddzialywanie efektu odbywa sie jednakowo na wszystkich odcieniach.\nPrzy +100 odcienie skory sa pomijane podczas gdy oddzialywanie odbywa sie na wszystkich pozostalych odcieniach.
-TP_DIRPYREQUALIZER_THRESHOLD;Prog
-TP_DIRPYREQUALIZER_TOOLTIP;Zapobiega artefaktom w strefach przejscia pomiedzy odcieniom skory (hue, chrominancja, luminancja) a pozostalym odcieniom.
-TP_DISTORTION_AMOUNT;Sila
-TP_DISTORTION_LABEL;Dystorsja
-TP_EPD_EDGESTOPPING;Wyszukiwanie krawedzi
-TP_EPD_LABEL;Tone Mapping
-TP_EPD_REWEIGHTINGITERATES;Powtarzanie rozwazania
-TP_EPD_SCALE;Skala
-TP_EPD_STRENGTH;Sila
-TP_EXPOSURE_AUTOLEVELS;Wyrownaj poziomy
-TP_EXPOSURE_AUTOLEVELS_TIP;Dokonaj automatycznego ustawienia parametrow ekspozycji na podstawie analizy obrazu
-TP_EXPOSURE_BLACKLEVEL;Czern
-TP_EXPOSURE_BRIGHTNESS;Jasnosc
-TP_EXPOSURE_CLIP;Przytnij %
-TP_EXPOSURE_CLIP_TIP;Ulamek pikseli ktore maja zostac rozjasnione do punktu przeswietlenia podczas automatycznego wyrownania poziomow.
-TP_EXPOSURE_COMPRHIGHLIGHTS;Kompresja podswietlen
-TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Prog kompresji podswietlen
-TP_EXPOSURE_COMPRSHADOWS;Kompresja cieni
-TP_EXPOSURE_CONTRAST;Kontrast
-TP_EXPOSURE_CURVEEDITOR;Krzywa tonalna
-TP_EXPOSURE_CURVEEDITOR1;Krzywa Tonalna 1
-TP_EXPOSURE_CURVEEDITOR2;Krzywa Tonalna 2
-TP_EXPOSURE_CURVEEDITOR2_TOOLTIP;Wiecej informacji na temat optymalnego wykorzystania obu krzywych jest dostepne w podreczniku (RawTherapee Manual) w dziale:\nThe Toolbox > Exposure Tab > Exposure Panel > Tone Curve\n(Narzedzie > Zakladka Ekspozycji > Krzywe Tonalne)
-TP_EXPOSURE_EXPCOMP;Korekcja ekspozycji (EV)
-TP_EXPOSURE_LABEL;Ekspozycja
-TP_EXPOSURE_SATURATION;Nasycenie
-TP_EXPOSURE_TCMODE_FILMLIKE;Klisza
-TP_EXPOSURE_TCMODE_LABEL1;Tryb krzywej 1
-TP_EXPOSURE_TCMODE_LABEL2;Tryb krzywej 2
-TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Mieszanie nasycenia i mocy swiatla bialego
-TP_EXPOSURE_TCMODE_STANDARD;Standardowa
-TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Wazona standardowa
-TP_EXPOS_BLACKPOINT_LABEL;Punkt czerni raw
-TP_EXPOS_WHITEPOINT_LABEL;Punkt bieli raw
-TP_FILMSIMULATION_LABEL;Symulacja Kliszy
-TP_FILMSIMULATION_STRENGTH;Sila
-TP_FILMSIMULATION_ZEROCLUTSFOUND;Ustaw folder HaldCLUT w Ustawieniach
-TP_FLATFIELD_AUTOSELECT;Autowybor
-TP_FLATFIELD_BLURRADIUS;Promien rozmycia
-TP_FLATFIELD_BLURTYPE;Typ rozmycia
-TP_FLATFIELD_BT_AREA;Obszar
-TP_FLATFIELD_BT_HORIZONTAL;Poziomy
-TP_FLATFIELD_BT_VERTHORIZ;Poziomy + pionowy
-TP_FLATFIELD_BT_VERTICAL;Pionowy
-TP_FLATFIELD_CLIPCONTROL;Zabezpieczenie przed obcinaniem
-TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Funkcja ta chroni przed obcinaniem podswietlen ktore moze zaistniec przy stosowaniu obrazow type "puste pole". Nalezy zachowac ostroznosc, poniewaz jesli obciete rejony istnieja przed zastosowaniem pustego pola, funkcja ta moze spowodowac zabarwienie tych rejonow ktore powinny byc biale.
-TP_FLATFIELD_LABEL;Puste pole
-TP_GAMMA_CURV;Gamma
-TP_GAMMA_FREE;Dowolna gamma
-TP_GAMMA_OUTPUT;Wyjsciowa gamma
-TP_GAMMA_SLOP;Nachylenie (liniowy)
-TP_GENERAL_11SCALE_TOOLTIP;Efekty tego narzedzia sa widoczne badz poprawne przy przyblizeniu 100% lub wiecej.
-TP_GRADIENT_CENTER;Srodek
-TP_GRADIENT_CENTER_X;Srodek X
-TP_GRADIENT_CENTER_X_TOOLTIP;Przesun filtr do lewej (ujemne wartosci) lub prawej (dodatne wartosci).
-TP_GRADIENT_CENTER_Y;Srodek Y
-TP_GRADIENT_CENTER_Y_TOOLTIP;Przesun filtr do gory (ujemne wartosci) lub do dolu (dodatne wartosci).
-TP_GRADIENT_DEGREE;Kat
-TP_GRADIENT_DEGREE_TOOLTIP;Kat obrotu filtra w stopniach.
-TP_GRADIENT_FEATHER;Wtapianie
-TP_GRADIENT_FEATHER_TOOLTIP;Szerokosc nachylenia zbocza w procentach przekatnej.
-TP_GRADIENT_LABEL;Filtr Polowkowy
-TP_GRADIENT_STRENGTH;Sila
-TP_GRADIENT_STRENGTH_TOOLTIP;Sila filtru w jednostkach EV.
-TP_HLREC_BLEND;Mieszanie
-TP_HLREC_CIELAB;Mieszanie koloru CIELab
-TP_HLREC_COLOR;Propagacja koloru
-TP_HLREC_ENA_TOOLTIP;Moze zostac automatycznie wlaczone w skutek dzialania automatycznej ekspozycji
-TP_HLREC_LABEL;Odzyskiwanie przeswietlen
-TP_HLREC_LUMINANCE;Odzyskiwanie luminancji
-TP_HLREC_METHOD;Metoda:
-TP_HSVEQUALIZER_CHANNEL;Kanal
-TP_HSVEQUALIZER_HUE;H
-TP_HSVEQUALIZER_LABEL;Ekwalizator HSV
-TP_HSVEQUALIZER_SAT;S
-TP_HSVEQUALIZER_VAL;V
-TP_ICM_BLENDCMSMATRIX;Tlumienie przeswietlen danymi z matrycy
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Wlacz odzyskiwanie przeswietlonych regionow jesli profil ICC wykorzystuje LUT (tablicowanie).
-TP_ICM_DCPILLUMINANT;Iluminant
-TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolowany
-TP_ICM_DCPILLUMINANT_TOOLTIP;Wybierz ktory osadzony iluminant DCP nalezy uzyc. Domyslna opcja jest "interpolowany", czyli wartosc jest mieszanina pomiedzy dwoma osadzonymi wartosciami iluminantu zaleznie od balansu bieli. Ten wybor jest mozliwy jedynie kiedy DCP zawiera dwa iluminanty z mozliwoscia interpolacji.
-TP_ICM_INPUTCAMERA;Domyslny aparatu
-TP_ICM_INPUTCAMERAICC;Domyslny aparatu lub ICC
-TP_ICM_INPUTCAMERAICC_TOOLTIP;Uzyj profil ICC stworzony specjalnie na potrzeby RawTherapee. Jest bardziej dokladny niz domyslny matrycowy profil ICC, lecz dostepny tylko dla niektorych aparatow.
-TP_ICM_INPUTCAMERA_TOOLTIP;Uzyj prostej domyslnej matrycy kolorow z DCRAW badz zapisanej w DNG.
-TP_ICM_INPUTCUSTOM;Wlasny
-TP_ICM_INPUTCUSTOM_TOOLTIP;Wczytaj wlasny profil ICC z pliku.
-TP_ICM_INPUTDLGLABEL;Wybierz wejsciowy profil ICC...
-TP_ICM_INPUTEMBEDDED;Jesli to mozliwe, uzyj osadzonego
-TP_ICM_INPUTEMBEDDED_TOOLTIP;Uzyj profil ICC zapisany w plikach innych niz raw.
-TP_ICM_INPUTNONE;Bez profilu
-TP_ICM_INPUTNONE_TOOLTIP;Nie uzywaj zadnego profilu kolorow. Pozyteczne jedynie w wyjatkowych przypadkach.
-TP_ICM_INPUTPROFILE;Profil wejsciowy
-TP_ICM_LABEL;ICM
-TP_ICM_NOICM;Brak ICM: Wyjscie sRGB
-TP_ICM_OUTPUTPROFILE;Profil wyjsciowy
-TP_ICM_SAVEREFERENCE_TOOLTIP;Zapisz liniowy obraz TIFF zanim profil wejsciowy zostanie zastosowany. Obraz ten mozna uzyc do kalibracji oraz do wytworzenia profilu aparatu.
-TP_ICM_TONECURVE;Uzyj krzywa tonalna z DCP
-TP_ICM_TONECURVE_TOOLTIP;Wlacz aby uzyc krzywa tonalna znajdujaca sie w profilu DCP. Opcja ta jest tylko aktywna jesli profil DCP zawiera krzywa tonalna.
-TP_ICM_WORKINGPROFILE;Profil roboczy
-TP_IMPULSEDENOISE_LABEL;Redukcja Szumow Impulsowych
-TP_IMPULSEDENOISE_THRESH;Prog
-TP_LABCURVE_AVOIDCOLORSHIFT;Zapobiegaj zmianom koloru
-TP_LABCURVE_AVOIDCOLORSHIFT_TOOLTIP;Umieszcza kolory w gamie roboczej przestrzeni kolorow i stosuje korekte Munsell'a
-TP_LABCURVE_BRIGHTNESS;Swiatlosc
-TP_LABCURVE_CHROMATICITY;Chromatycznosc
-TP_LABCURVE_CHROMA_TOOLTIP;Aby zastosowac tonowanie zdjecia B&W, ustaw chromatycznosc na -100.
-TP_LABCURVE_CONTRAST;Kontrast
-TP_LABCURVE_CURVEEDITOR;Krzywa luminacji
-TP_LABCURVE_CURVEEDITOR_A_RANGE1;Zielone Nasycone
-TP_LABCURVE_CURVEEDITOR_A_RANGE2;Zielone Pastelowe
-TP_LABCURVE_CURVEEDITOR_A_RANGE3;Czerwone Pastelowe
-TP_LABCURVE_CURVEEDITOR_A_RANGE4;Czerwone Nasycone
-TP_LABCURVE_CURVEEDITOR_B_RANGE1;Niebieskie Nasycone
-TP_LABCURVE_CURVEEDITOR_B_RANGE2;Niebieskie Pastelowe
-TP_LABCURVE_CURVEEDITOR_B_RANGE3;Zolte Pastelowe
-TP_LABCURVE_CURVEEDITOR_B_RANGE4;Zolte Nasycone
-TP_LABCURVE_CURVEEDITOR_CC;CC
-TP_LABCURVE_CURVEEDITOR_CC_RANGE1;Neutralne
-TP_LABCURVE_CURVEEDITOR_CC_RANGE2;Metne
-TP_LABCURVE_CURVEEDITOR_CC_RANGE3;Pastelowe
-TP_LABCURVE_CURVEEDITOR_CC_RANGE4;Nasycone
-TP_LABCURVE_CURVEEDITOR_CC_TOOLTIP;Chromatycznosc wedlug chromatycznosci C=f(C).
-TP_LABCURVE_CURVEEDITOR_CH;CH
-TP_LABCURVE_CURVEEDITOR_CH_TOOLTIP;Chromatycznosc wedlug odcieni (hue) C=f(H)
-TP_LABCURVE_CURVEEDITOR_CL;CL
-TP_LABCURVE_CURVEEDITOR_CL_TOOLTIP;Chromatycznosc wedlug luminancji C=f(L)
-TP_LABCURVE_CURVEEDITOR_HH;HH
-TP_LABCURVE_CURVEEDITOR_HH_TOOLTIP;Odcien (hue) wedlug odcieni H=f(H)
-TP_LABCURVE_CURVEEDITOR_LC;LC
-TP_LABCURVE_CURVEEDITOR_LC_TOOLTIP;Luminancja wedlug chromatycznosci L=f(C)
-TP_LABCURVE_CURVEEDITOR_LH;LH
-TP_LABCURVE_CURVEEDITOR_LH_TOOLTIP;Luminance wedlug odcieni (hue) L=f(H)
-TP_LABCURVE_CURVEEDITOR_LL_TOOLTIP;Luminancja wedlug luminancji L=f(L)
-TP_LABCURVE_LABEL;Regulacja L*a*b*
-TP_LABCURVE_LCREDSK;Ogranicz LC do odcieni skory oraz czerwieni
-TP_LABCURVE_LCREDSK_TIP;Kiedy opcja jest wlaczona, wplyw krzywej LC (Luminancja wedlug chromatycznosci) jest ograniczony do odcieni skory oraz czerwieni.\nKiedy opcja jest wylaczona, krzywa LC wplywa na wszystkie barwy.
-TP_LABCURVE_RSTPROTECTION;Ochrona skory oraz czerwieni
-TP_LABCURVE_RSTPRO_TOOLTIP;Ma wplyw na suwak Chromatycznosci oraz na krzywa CC.
-TP_LENSGEOM_AUTOCROP;Auto-kadrowanie
-TP_LENSGEOM_FILL;Auto-wypelnienie
-TP_LENSGEOM_LABEL;Obiektyw / Geometria
-TP_LENSPROFILE_LABEL;Profil korekcji obiektywu LCP
-TP_NEUTRAL_TIP;Zresetuj ustawienia do wartosci neutralnych.\nDziala na tych samych suwakach na ktorych funkcja "Wyrownaj poziomy" dziala, niezaleznie od tego czy funkcja ta byla uzyta czy nie.
-TP_PCVIGNETTE_FEATHER;Wtapianie
-TP_PCVIGNETTE_FEATHER_TOOLTIP;Wtapianie:\n0 = tylko brzegi,\n50 = w pol drogi do srodka,\n100 = az do srodka.
-TP_PCVIGNETTE_LABEL;Winietowanie
-TP_PCVIGNETTE_ROUNDNESS;Okraglosc
-TP_PCVIGNETTE_ROUNDNESS_TOOLTIP;Okraglosc:\n0 = prostokat,\n50 = dopasowana elipsa,\n100 = okrag.
-TP_PCVIGNETTE_STRENGTH;Sila
-TP_PCVIGNETTE_STRENGTH_TOOLTIP;Sila filtru w katach w jednostkach EV.
-TP_PERSPECTIVE_HORIZONTAL;Pozioma
-TP_PERSPECTIVE_LABEL;Perspektywa
-TP_PERSPECTIVE_VERTICAL;Pionowa
-TP_PFCURVE_CURVEEDITOR_CH;Odcien
-TP_PFCURVE_CURVEEDITOR_CH_TOOLTIP;Ogranicza natezenie usuwania widma wedlug kolorow.\nWyzej = bardziej,\nNizej = mniej.
-TP_PREPROCESS_DEADPIXFILT;Filtr martwych pikseli
-TP_PREPROCESS_DEADPIXFILT_TOOLTIP;Lata martwe piksele (pojedyncze czarne piksele).
-TP_PREPROCESS_GREENEQUIL;Wyrownanie zieleni
-TP_PREPROCESS_HOTPIXFILT;Filtr goracych pikseli
-TP_PREPROCESS_HOTPIXFILT_TOOLTIP;Lata gorace piksele (pojedyncze swiecace, przesycone piksele).
-TP_PREPROCESS_LABEL;Przetwarzanie poczatkowe
-TP_PREPROCESS_LINEDENOISE;Filtr zaklocen liniowych
-TP_PREPROCESS_NO_FOUND;Nic nie znaleziono
-TP_RAWCACORR_AUTO;Autokorekcja
-TP_RAWCACORR_CABLUE;Niebieski
-TP_RAWCACORR_CARED;Czerwony
-TP_RAWEXPOS_BLACKS;Poziomy czerni
-TP_RAWEXPOS_BLACK_0;Zielony 1 (glowny)
-TP_RAWEXPOS_BLACK_1;Czerwony
-TP_RAWEXPOS_BLACK_2;Niebieski
-TP_RAWEXPOS_BLACK_3;Zielony 2
-TP_RAWEXPOS_BLACK_BLUE;Niebieski
-TP_RAWEXPOS_BLACK_GREEN;Zielony
-TP_RAWEXPOS_BLACK_RED;Czerwony
-TP_RAWEXPOS_LINEAR;Liniowy wspolczynnik korekcji
-TP_RAWEXPOS_RGB;Czerwony, Zielony, Niebieski
-TP_RAWEXPOS_TWOGREEN;Polacz obie zielenie
-TP_RAW_DCBENHANCE;Zastosuj poprawe DCB
-TP_RAW_DCBITERATIONS;Liczba powtorzen DCB
-TP_RAW_DMETHOD;Metoda
-TP_RAW_DMETHOD_PROGRESSBAR;Demozaikowanie %1...
-TP_RAW_DMETHOD_PROGRESSBAR_REFINE;Udoskonalanie demozaikowania...
-TP_RAW_DMETHOD_TOOLTIP;IGV oraz LMMSE sa przeznaczone dla zdjec raw o wysokim poziomie szumow (wysokie ISO) aby zapobiec utworzeniu sie wzorkow w ksztalcie malych labiryntow, posteryzacji oraz mydlanego wygladu.
-TP_RAW_FALSECOLOR;Kroki zapobiegajace falszowaniu kolorow
-TP_RAW_LABEL;Demozaikowanie
-TP_RAW_LMMSEITERATIONS;Ilosc krokow udoskonalenia LMMSE
-TP_RAW_LMMSE_TOOLTIP;Aby zmniejszyc ilosc artefaktow i poprawic stosunek sygnalu do szumow, mozna wykorzystac nastepujace ustawienia:\n1: Gamma\n2-4: Srednia mediana\n5-6: Rafinowanie
-TP_RAW_SENSOR_BAYER_LABEL;Matryca z filtrem Bayera
-TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;Trzy powtorzenia prowadza do najlepszych rezultatow (zalecane dla zdjec o niskim ISO).\nJedno powtorzenie jest prawie nie do odroznienia od trzech dla zdjec o wysokim ISO a jest znacznie szybsze.
-TP_RAW_SENSOR_XTRANS_LABEL;Matryca z filtrem X-Trans
-TP_RESIZE_APPLIESTO;Dotyczy:
-TP_RESIZE_CROPPEDAREA;Obszaru kadrowanego
-TP_RESIZE_FITBOX;Wymiary obwodu
-TP_RESIZE_FULLIMAGE;Calego zdjecia
-TP_RESIZE_H;Wysokosc:
-TP_RESIZE_HEIGHT;Wysokosc
-TP_RESIZE_LABEL;Zmiana rozmiaru
-TP_RESIZE_LANCZOS;Lanczos
-TP_RESIZE_METHOD;Metoda:
-TP_RESIZE_NEAREST;Najblizsza
-TP_RESIZE_SCALE;Skale
-TP_RESIZE_SPECIFY;Okresl:
-TP_RESIZE_W;Szerokosc
-TP_RESIZE_WIDTH;Szerokosc
-TP_RGBCURVES_BLUE;B
-TP_RGBCURVES_CHANNEL;Kanal
-TP_RGBCURVES_GREEN;G
-TP_RGBCURVES_LABEL;Krzywe RGB
-TP_RGBCURVES_LUMAMODE;Tryb Luminancji
-TP_RGBCURVES_LUMAMODE_TOOLTIP;Tryb Luminancji pozwala na zmiane wplywu kanalow R, G i B na luminancje obrazu bez zmian kolorow.
-TP_RGBCURVES_RED;R
-TP_ROTATE_DEGREE;Stopnie
-TP_ROTATE_LABEL;Obrot
-TP_ROTATE_SELECTLINE;Wyprostuj obraz
-TP_SAVEDIALOG_OK_TIP;Skrot: Ctrl-Enter
-TP_SHADOWSHLIGHTS_HIGHLIGHTS;Podswietlenia
-TP_SHADOWSHLIGHTS_HLTONALW;Szerokosc tonalna
-TP_SHADOWSHLIGHTS_LABEL;Cienie/Podswietlenia
-TP_SHADOWSHLIGHTS_LOCALCONTR;Kontrast lokalny
-TP_SHADOWSHLIGHTS_RADIUS;Promien
-TP_SHADOWSHLIGHTS_SHADOWS;Cienie
-TP_SHADOWSHLIGHTS_SHARPMASK;Ostra maska
-TP_SHADOWSHLIGHTS_SHTONALW;Szerokosc tonalna
-TP_SHARPENEDGE_AMOUNT;Sila
-TP_SHARPENEDGE_LABEL;Krawedzie
-TP_SHARPENEDGE_PASSES;Powtorzenia
-TP_SHARPENEDGE_THREE;Tylko luminancja
-TP_SHARPENING_AMOUNT;Sila
-TP_SHARPENING_EDRADIUS;Promien
-TP_SHARPENING_EDTOLERANCE;Tolerancja krawedzi
-TP_SHARPENING_HALOCONTROL;Kontrola poswiaty
-TP_SHARPENING_HCAMOUNT;Sila
-TP_SHARPENING_LABEL;Wyostrzanie
-TP_SHARPENING_METHOD;Metoda
-TP_SHARPENING_ONLYEDGES;Wyostrz tylko krawedzie
-TP_SHARPENING_RADIUS;Promien
-TP_SHARPENING_RLD;Dekonwolucja RL
-TP_SHARPENING_RLD_AMOUNT;Sila
-TP_SHARPENING_RLD_DAMPING;Tlumienie
-TP_SHARPENING_RLD_ITERATIONS;Powtorzenia
-TP_SHARPENING_THRESHOLD;Prog
-TP_SHARPENING_USM;Maska wyostrzajaca
-TP_SHARPENMICRO_AMOUNT;Sila
-TP_SHARPENMICRO_LABEL;Mikrokontrast
-TP_SHARPENMICRO_MATRIX;Matryca 3×3 zamiast 5×5
-TP_SHARPENMICRO_UNIFORMITY;Jednolitosc
-TP_VIBRANCE_AVOIDCOLORSHIFT;Zapobiegaj przesuniecia kolorow
-TP_VIBRANCE_CURVEEDITOR_SKINTONES;HH
-TP_VIBRANCE_CURVEEDITOR_SKINTONES_LABEL;Odcienie skory
-TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE1;Czerwone/Purpurowe
-TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE2;Czerwone
-TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE3;Czerwone/Zolte
-TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE4;Zolte
-TP_VIBRANCE_CURVEEDITOR_SKINTONES_TOOLTIP;Odcien (hue) wedlug odcieni H=f(H)
-TP_VIBRANCE_LABEL;Jaskrawosc
-TP_VIBRANCE_PASTELS;Odcienie pastelowe
-TP_VIBRANCE_PASTSATTOG;Polacz odcienie pastelowe i nasycone
-TP_VIBRANCE_PROTECTSKINS;Zachowaj odcienie skory
-TP_VIBRANCE_PSTHRESHOLD;Prog odcieni pastelowych/nasyconych
-TP_VIBRANCE_PSTHRESHOLD_SATTHRESH;Prog nasycenia
-TP_VIBRANCE_PSTHRESHOLD_TOOLTIP;Os pionowa odpowiada barwa pastelowym na dole oraz nasyconym na gorze.\nOs pozioma przedstawia zakres nasycenia.
-TP_VIBRANCE_PSTHRESHOLD_WEIGTHING;Wazenie przejscia barw pastelowych/nasyconych
-TP_VIBRANCE_SATURATED;Odcienie nasycone
-TP_VIGNETTING_AMOUNT;Ilosc
-TP_VIGNETTING_CENTER;Srodek
-TP_VIGNETTING_CENTER_X;Srodek X
-TP_VIGNETTING_CENTER_Y;Srodek Y
-TP_VIGNETTING_LABEL;Korekcja winietowania
-TP_VIGNETTING_RADIUS;Promien
-TP_VIGNETTING_STRENGTH;Sila
-TP_WBALANCE_AUTO;Auto
-TP_WBALANCE_CAMERA;Z aparatu
-TP_WBALANCE_CLOUDY;Pochmurnie
-TP_WBALANCE_CUSTOM;Wlasny
-TP_WBALANCE_DAYLIGHT;Swiatlo dzienne (slonecznie)
-TP_WBALANCE_EQBLUERED;Ekwalizator niebieskosci/czerwieni
-TP_WBALANCE_EQBLUERED_TOOLTIP;Pozwala na odchylke od typowego uzytku balansu bieli poprzez modulacje balansu niebieskosci/czerwieni.\nJest to przydatne kiedy:\na) warunki miejsca fotografii sa oddalone od standardowego iluminantu (swiatla o okreslonych parametrach za pomoca ktorego kalibruje sie profil wejsciowy aparatu), np. zdjecia robione pod woda,\nb) warunki fotografii sa oddalone od warunkow pod ktorymi kalibracje zostaly wykonane,\nc) macierze oraz profile ICC/DCP sa z jakiegos powodu nieodpowiednie.
-TP_WBALANCE_FLASH55;Leica
-TP_WBALANCE_FLASH60;Standardowe, Canon, Pentax, Olympus
-TP_WBALANCE_FLASH65;Nikon, Panasonic, Sony, Minolta
-TP_WBALANCE_FLASH_HEADER;Flash
-TP_WBALANCE_FLUO1;F1 - Swiatlo dzienne
-TP_WBALANCE_FLUO2;F2 - Chlodne biale
-TP_WBALANCE_FLUO3;F3 - Biale
-TP_WBALANCE_FLUO4;F4 - Cieple biale
-TP_WBALANCE_FLUO5;F5 - Swiatlo dzienne
-TP_WBALANCE_FLUO6;F6 - Biale Lite
-TP_WBALANCE_FLUO7;F7 - D65 Symulator swiatla dziennego
-TP_WBALANCE_FLUO8;F8 - D50 / Sylvania F40 Design
-TP_WBALANCE_FLUO9;F9 - Chlodne biale deluxe
-TP_WBALANCE_FLUO10;F10 - Philips TL85
-TP_WBALANCE_FLUO11;F11 - Philips TL84
-TP_WBALANCE_FLUO12;F12 - Philips TL83
-TP_WBALANCE_FLUO_HEADER;Jarzeniowe
-TP_WBALANCE_GREEN;Odcien
-TP_WBALANCE_GTI;GTI
-TP_WBALANCE_HMI;HMI
-TP_WBALANCE_JUDGEIII;JudgeIII
-TP_WBALANCE_LABEL;Balans bieli
-TP_WBALANCE_LAMP_HEADER;Lamp
-TP_WBALANCE_LED_CRS;CRS SP12 WWMR16
-TP_WBALANCE_LED_HEADER;LED
-TP_WBALANCE_LED_LSI;LSI Lumelex 2040
-TP_WBALANCE_METHOD;Metoda
-TP_WBALANCE_SHADE;Cien
-TP_WBALANCE_SIZE;Wielkosc:
-TP_WBALANCE_SOLUX35;Solux 3500K
-TP_WBALANCE_SOLUX41;Solux 4100K
-TP_WBALANCE_SOLUX47;Solux 4700K (vendor)
-TP_WBALANCE_SOLUX47_NG;Solux 4700K (Nat. Gallery)
-TP_WBALANCE_SPOTWB;Punktowy
-TP_WBALANCE_TEMPERATURE;Temperatura
-TP_WBALANCE_TUNGSTEN;Wolfram
-TP_WBALANCE_WATER1;Pod woda 1
-TP_WBALANCE_WATER2;Pod woda 2
-TP_WBALANCE_WATER_HEADER;Pod woda
-ZOOMPANEL_100;(100%)
-ZOOMPANEL_NEWCROPWINDOW;Otworz (nowa) lupe
-ZOOMPANEL_ZOOM100;Powieksz do 100%\nSkrot: z
-ZOOMPANEL_ZOOMFITCROPSCREEN;Dopasuj kadr do ekranu\nSkrot: f
-ZOOMPANEL_ZOOMFITSCREEN;Dopasuj caly obraz do ekranu\nSkrot: Alt-f
-ZOOMPANEL_ZOOMIN;Przybliz\nSkrot: +
-ZOOMPANEL_ZOOMOUT;Oddal\nSkrot: -
-
-!!!!!!!!!!!!!!!!!!!!!!!!!
-! Untranslated keys follow; remove the ! prefix after an entry is translated.
-!!!!!!!!!!!!!!!!!!!!!!!!!
-
-!ADJUSTER_RESET_TO_DEFAULT;Click - reset to default value.\nCtrl+click - reset to initial value.
-!BATCHQUEUE_STARTSTOPHINT;Start or stop processing the images in the queue.\n\nShortcut: Ctrl+s
-!CURVEEDITOR_AXIS_IN;I:
-!CURVEEDITOR_AXIS_LEFT_TAN;LT:
-!CURVEEDITOR_AXIS_OUT;O:
-!CURVEEDITOR_AXIS_RIGHT_TAN;RT:
-!CURVEEDITOR_CATMULLROM;Flexible
-!CURVEEDITOR_EDITPOINT_HINT;Enable edition of node in/out values.\n\nRight-click on a node to select it.\nRight-click on empty space to de-select the node.
-!DONT_SHOW_AGAIN;Don't show this message again.
-!DYNPROFILEEDITOR_DELETE;Delete
-!DYNPROFILEEDITOR_EDIT;Edit
-!DYNPROFILEEDITOR_EDIT_RULE;Edit Dynamic Profile Rule
-!DYNPROFILEEDITOR_ENTRY_TOOLTIP;The matching is case insensitive.\nUse the "re:" prefix to enter\na regular expression.
-!DYNPROFILEEDITOR_IMGTYPE_ANY;Any
-!DYNPROFILEEDITOR_IMGTYPE_HDR;HDR
-!DYNPROFILEEDITOR_IMGTYPE_PS;Pixel Shift
-!DYNPROFILEEDITOR_IMGTYPE_STD;Standard
-!DYNPROFILEEDITOR_MOVE_DOWN;Move Down
-!DYNPROFILEEDITOR_MOVE_UP;Move Up
-!DYNPROFILEEDITOR_NEW;New
-!DYNPROFILEEDITOR_NEW_RULE;New Dynamic Profile Rule
-!DYNPROFILEEDITOR_PROFILE;Processing Profile
-!EXIFFILTER_IMAGETYPE;Image type
-!EXIFPANEL_SHOWALL;Show all
-!EXPORT_BYPASS;Processing steps to bypass
-!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
-!EXPORT_PIPELINE;Processing pipeline
-!EXPORT_USE_FAST_PIPELINE;Dedicated (full processing on resized image)
-!EXPORT_USE_FAST_PIPELINE_TIP;Use a dedicated processing pipeline for images in Fast Export mode, that trades speed for quality. Resizing of the image is done as early as possible, instead of doing it at the end like in the normal pipeline. The speedup can be significant, but be prepared to see artifacts and a general degradation of output quality.
-!EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
-!FILEBROWSER_BROWSEPATHBUTTONHINT;Click to open specified path, reload folder and apply "find" keywords.
-!FILEBROWSER_CACHECLEARFROMFULL;Clear all including cached profiles
-!FILEBROWSER_CACHECLEARFROMPARTIAL;Clear all except cached profiles
-!FILEBROWSER_RESETDEFAULTPROFILE;Reset to default
-!FILEBROWSER_SHOWNOTTRASHHINT;Show only non-deleted images.
-!FILEBROWSER_SHOWORIGINALHINT;Show only original images.\n\nWhen several images exist with the same filename but different extensions, the one considered original is the one whose extension is nearest the top of the parsed extensions list in Preferences > File Browser > Parsed Extensions.
-!FILECHOOSER_FILTER_ANY;All files
-!FILECHOOSER_FILTER_COLPROF;Color profiles (*.icc)
-!FILECHOOSER_FILTER_CURVE;Curve files
-!FILECHOOSER_FILTER_LCP;Lens correction profiles
-!FILECHOOSER_FILTER_PP;Processing profiles
-!FILECHOOSER_FILTER_SAME;Same format as current photo
-!FILECHOOSER_FILTER_TIFF;TIFF files
-!GENERAL_APPLY;Apply
-!GENERAL_ASIMAGE;As Image
-!GENERAL_CURRENT;Current
-!GENERAL_OPEN;Open
-!GENERAL_RESET;Reset
-!GENERAL_SAVE_AS;Save as...
-!GENERAL_SLIDER;Slider
-!GIMP_PLUGIN_INFO;Welcome to the RawTherapee GIMP plugin!\nOnce you are done editing, simply close the main RawTherapee window and the image will be automatically imported in GIMP.
-!HISTOGRAM_TOOLTIP_MODE;Toggle between linear, log-linear and log-log scaling of the histogram.
-!HISTORY_MSG_166;Exposure - Reset
-!HISTORY_MSG_173;NR - Detail recovery
-!HISTORY_MSG_203;NR - Color space
-!HISTORY_MSG_235;B&W - CM - Auto
-!HISTORY_MSG_237;B&W - CM
-!HISTORY_MSG_256;NR - Median - Type
-!HISTORY_MSG_273;CT - Color Balance SMH
-!HISTORY_MSG_297;NR - Mode
-!HISTORY_MSG_299;NR - Chrominance curve
-!HISTORY_MSG_300;-
-!HISTORY_MSG_301;NR - Luma control
-!HISTORY_MSG_302;NR - Chroma method
-!HISTORY_MSG_303;NR - Chroma method
-!HISTORY_MSG_304;W - Contrast levels
-!HISTORY_MSG_305;Wavelet Levels
-!HISTORY_MSG_306;W - Process
-!HISTORY_MSG_307;W - Process
-!HISTORY_MSG_308;W - Process direction
-!HISTORY_MSG_309;W - ES - Detail
-!HISTORY_MSG_310;W - Residual - Sky tar/prot
-!HISTORY_MSG_311;W - Wavelet levels
-!HISTORY_MSG_312;W - Residual - Shadows threshold
-!HISTORY_MSG_313;W - Chroma - Sat/past
-!HISTORY_MSG_314;W - Gamut - Reduce artifacts
-!HISTORY_MSG_315;W - Residual - Contrast
-!HISTORY_MSG_316;W - Gamut - Skin tar/prot
-!HISTORY_MSG_317;W - Gamut - Skin hue
-!HISTORY_MSG_318;W - Contrast - Highlight levels
-!HISTORY_MSG_319;W - Contrast - Highlight range
-!HISTORY_MSG_320;W - Contrast - Shadow range
-!HISTORY_MSG_321;W - Contrast - Shadow levels
-!HISTORY_MSG_322;W - Gamut - Avoid color shift
-!HISTORY_MSG_323;W - ES - Local contrast
-!HISTORY_MSG_324;W - Chroma - Pastel
-!HISTORY_MSG_325;W - Chroma - Saturated
-!HISTORY_MSG_326;W - Chroma - Method
-!HISTORY_MSG_327;W - Contrast - Apply to
-!HISTORY_MSG_328;W - Chroma - Link strength
-!HISTORY_MSG_329;W - Toning - Opacity RG
-!HISTORY_MSG_330;W - Toning - Opacity BY
-!HISTORY_MSG_331;W - Contrast levels - Extra
-!HISTORY_MSG_332;W - Tiling method
-!HISTORY_MSG_333;W - Residual - Shadows
-!HISTORY_MSG_334;W - Residual - Chroma
-!HISTORY_MSG_335;W - Residual - Highlights
-!HISTORY_MSG_336;W - Residual - Highlights threshold
-!HISTORY_MSG_337;W - Residual - Sky hue
-!HISTORY_MSG_338;W - ES - Radius
-!HISTORY_MSG_339;W - ES - Strength
-!HISTORY_MSG_340;W - Strength
-!HISTORY_MSG_341;W - Edge performance
-!HISTORY_MSG_342;W - ES - First level
-!HISTORY_MSG_343;W - Chroma levels
-!HISTORY_MSG_344;W - Meth chroma sl/cur
-!HISTORY_MSG_345;W - ES - Local contrast
-!HISTORY_MSG_346;W - ES - Local contrast method
-!HISTORY_MSG_347;W - Denoise - Level 1
-!HISTORY_MSG_348;W - Denoise - Level 2
-!HISTORY_MSG_349;W - Denoise - Level 3
-!HISTORY_MSG_350;W - ES - Edge detection
-!HISTORY_MSG_351;W - Residual - HH curve
-!HISTORY_MSG_352;W - Background
-!HISTORY_MSG_353;W - ES - Gradient sensitivity
-!HISTORY_MSG_354;W - ES - Enhanced
-!HISTORY_MSG_355;W - ES - Threshold low
-!HISTORY_MSG_356;W - ES - Threshold high
-!HISTORY_MSG_357;W - Denoise - Link with ES
-!HISTORY_MSG_358;W - Gamut - CH
-!HISTORY_MSG_359;Hot/Dead - Threshold
-!HISTORY_MSG_360;TM - Gamma
-!HISTORY_MSG_361;W - Final - Chroma balance
-!HISTORY_MSG_362;W - Residual - Compression method
-!HISTORY_MSG_363;W - Residual - Compression strength
-!HISTORY_MSG_364;W - Final - Contrast balance
-!HISTORY_MSG_365;W - Final - Delta balance
-!HISTORY_MSG_366;W - Residual - Compression gamma
-!HISTORY_MSG_367;W - Final - 'After' contrast curve
-!HISTORY_MSG_368;W - Final - Contrast balance
-!HISTORY_MSG_369;W - Final - Balance method
-!HISTORY_MSG_370;W - Final - Local contrast curve
-!HISTORY_MSG_371;Post-Resize Sharpening
-!HISTORY_MSG_372;PRS USM - Radius
-!HISTORY_MSG_373;PRS USM - Amount
-!HISTORY_MSG_374;PRS USM - Threshold
-!HISTORY_MSG_375;PRS USM - Sharpen only edges
-!HISTORY_MSG_376;PRS USM - Edge detection radius
-!HISTORY_MSG_377;PRS USM - Edge tolerance
-!HISTORY_MSG_378;PRS USM - Halo control
-!HISTORY_MSG_379;PRS USM - Halo control amount
-!HISTORY_MSG_380;PRS - Method
-!HISTORY_MSG_381;PRS RLD - Radius
-!HISTORY_MSG_382;PRS RLD - Amount
-!HISTORY_MSG_383;PRS RLD - Damping
-!HISTORY_MSG_384;PRS RLD - Iterations
-!HISTORY_MSG_385;W - Residual - Color Balance
-!HISTORY_MSG_386;W - Residual - CB green high
-!HISTORY_MSG_387;W - Residual - CB blue high
-!HISTORY_MSG_388;W - Residual - CB green mid
-!HISTORY_MSG_389;W - Residual - CB blue mid
-!HISTORY_MSG_390;W - Residual - CB green low
-!HISTORY_MSG_391;W - Residual - CB blue low
-!HISTORY_MSG_392;W - Residual - Color Balance
-!HISTORY_MSG_393;DCP - Look table
-!HISTORY_MSG_394;DCP - Baseline exposure
-!HISTORY_MSG_395;DCP - Base table
-!HISTORY_MSG_396;W - Contrast sub-tool
-!HISTORY_MSG_397;W - Chroma sub-tool
-!HISTORY_MSG_398;W - ES sub-tool
-!HISTORY_MSG_399;W - Residual sub-tool
-!HISTORY_MSG_400;W - Final sub-tool
-!HISTORY_MSG_401;W - Toning sub-tool
-!HISTORY_MSG_402;W - Denoise sub-tool
-!HISTORY_MSG_403;W - ES - Edge sensitivity
-!HISTORY_MSG_404;W - ES - Base amplification
-!HISTORY_MSG_405;W - Denoise - Level 4
-!HISTORY_MSG_406;W - ES - Neighboring pixels
-!HISTORY_MSG_407;Retinex - Method
-!HISTORY_MSG_408;Retinex - Radius
-!HISTORY_MSG_409;Retinex - Contrast
-!HISTORY_MSG_410;Retinex - Offset
-!HISTORY_MSG_411;Retinex - Strength
-!HISTORY_MSG_412;Retinex - Gaussian gradient
-!HISTORY_MSG_413;Retinex - Contrast
-!HISTORY_MSG_414;Retinex - Histogram - Lab
-!HISTORY_MSG_415;Retinex - Transmission
-!HISTORY_MSG_416;Retinex
-!HISTORY_MSG_417;Retinex - Transmission median
-!HISTORY_MSG_418;Retinex - Threshold
-!HISTORY_MSG_419;Retinex - Color space
-!HISTORY_MSG_420;Retinex - Histogram - HSL
-!HISTORY_MSG_421;Retinex - Gamma
-!HISTORY_MSG_422;Retinex - Gamma
-!HISTORY_MSG_423;Retinex - Gamma slope
-!HISTORY_MSG_424;Retinex - HL threshold
-!HISTORY_MSG_425;Retinex - Log base
-!HISTORY_MSG_426;Retinex - Hue equalizer
-!HISTORY_MSG_427;Output rendering intent
-!HISTORY_MSG_428;Monitor rendering intent
-!HISTORY_MSG_429;Retinex - Iterations
-!HISTORY_MSG_430;Retinex - Transmission gradient
-!HISTORY_MSG_431;Retinex - Strength gradient
-!HISTORY_MSG_432;Retinex - M - Highlights
-!HISTORY_MSG_433;Retinex - M - Highlights TW
-!HISTORY_MSG_434;Retinex - M - Shadows
-!HISTORY_MSG_435;Retinex - M - Shadows TW
-!HISTORY_MSG_436;Retinex - M - Radius
-!HISTORY_MSG_437;Retinex - M - Method
-!HISTORY_MSG_438;Retinex - M - Equalizer
-!HISTORY_MSG_439;Retinex - Process
-!HISTORY_MSG_440;CbDL - Method
-!HISTORY_MSG_441;Retinex - Gain transmission
-!HISTORY_MSG_442;Retinex - Scale
-!HISTORY_MSG_443;Output black point compensation
-!HISTORY_MSG_444;WB - Temp bias
-!HISTORY_MSG_445;Raw sub-image
-!HISTORY_MSG_449;PS - ISO adaption
-!HISTORY_MSG_452;PS - Show motion
-!HISTORY_MSG_453;PS - Show mask only
-!HISTORY_MSG_457;PS - Check red/blue
-!HISTORY_MSG_462;PS - Check green
-!HISTORY_MSG_464;PS - Blur motion mask
-!HISTORY_MSG_465;PS - Blur radius
-!HISTORY_MSG_468;PS - Fill holes
-!HISTORY_MSG_469;PS - Median
-!HISTORY_MSG_471;PS - Motion correction
-!HISTORY_MSG_472;PS - Smooth transitions
-!HISTORY_MSG_473;PS - Use LMMSE
-!HISTORY_MSG_474;PS - Equalize
-!HISTORY_MSG_475;PS - Equalize channel
-!HISTORY_MSG_476;CAM02 - Temp out
-!HISTORY_MSG_477;CAM02 - Green out
-!HISTORY_MSG_478;CAM02 - Yb out
-!HISTORY_MSG_479;CAM02 - CAT02 adaptation out
-!HISTORY_MSG_480;CAM02 - Automatic CAT02 out
-!HISTORY_MSG_481;CAM02 - Temp scene
-!HISTORY_MSG_482;CAM02 - Green scene
-!HISTORY_MSG_483;CAM02 - Yb scene
-!HISTORY_MSG_484;CAM02 - Auto Yb scene
-!HISTORY_MSG_485;Lens Correction
-!HISTORY_MSG_486;Lens Correction - Camera
-!HISTORY_MSG_487;Lens Correction - Lens
-!HISTORY_MSG_488;Dynamic Range Compression
-!HISTORY_MSG_489;DRC - Detail
-!HISTORY_MSG_490;DRC - Amount
-!HISTORY_MSG_491;White Balance
-!HISTORY_MSG_492;RGB Curves
-!HISTORY_MSG_493;L*a*b* Adjustments
-!HISTORY_MSG_CLAMPOOG;Clip out-of-gamut colors
-!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_AB;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_CHANNEL;CT - Channel
-!HISTORY_MSG_COLORTONING_LABREGION_CHROMATICITYMASK;CT - region C mask
-!HISTORY_MSG_COLORTONING_LABREGION_HUEMASK;CT - H mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESS;CT - Lightness
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESSMASK;CT - L mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIST;CT - List
-!HISTORY_MSG_COLORTONING_LABREGION_MASKBLUR;CT - region mask blur
-!HISTORY_MSG_COLORTONING_LABREGION_OFFSET;CT - region offset
-!HISTORY_MSG_COLORTONING_LABREGION_POWER;CT - region power
-!HISTORY_MSG_COLORTONING_LABREGION_SATURATION;CT - Saturation
-!HISTORY_MSG_COLORTONING_LABREGION_SHOWMASK;CT - region show mask
-!HISTORY_MSG_COLORTONING_LABREGION_SLOPE;CT - region slope
-!HISTORY_MSG_DEHAZE_DEPTH;Dehaze - Depth
-!HISTORY_MSG_DEHAZE_ENABLED;Haze Removal
-!HISTORY_MSG_DEHAZE_SHOW_DEPTH_MAP;Dehaze - Show depth map
-!HISTORY_MSG_DEHAZE_STRENGTH;Dehaze - Strength
-!HISTORY_MSG_DUALDEMOSAIC_AUTO_CONTRAST;Dual demosaic - Auto threshold
-!HISTORY_MSG_DUALDEMOSAIC_CONTRAST;Dual demosaic - Contrast threshold
-!HISTORY_MSG_HISTMATCHING;Auto-matched tone curve
-!HISTORY_MSG_ICM_OUTPUT_PRIMARIES;Output - Primaries
-!HISTORY_MSG_ICM_OUTPUT_TEMP;Output - ICC-v4 illuminant D
-!HISTORY_MSG_ICM_OUTPUT_TYPE;Output - Type
-!HISTORY_MSG_ICM_WORKING_GAMMA;Working - Gamma
-!HISTORY_MSG_ICM_WORKING_SLOPE;Working - Slope
-!HISTORY_MSG_ICM_WORKING_TRC_METHOD;Working - TRC method
-!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
-!HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness
-!HISTORY_MSG_LOCALCONTRAST_ENABLED;Local Contrast
-!HISTORY_MSG_LOCALCONTRAST_LIGHTNESS;Local Contrast - Lightness
-!HISTORY_MSG_LOCALCONTRAST_RADIUS;Local Contrast - Radius
-!HISTORY_MSG_METADATA_MODE;Metadata copy mode
-!HISTORY_MSG_MICROCONTRAST_CONTRAST;Microcontrast - Contrast threshold
-!HISTORY_MSG_PIXELSHIFT_DEMOSAIC;PS - Demosaic method for motion
-!HISTORY_MSG_PREPROCESS_LINEDENOISE_DIRECTION;Line noise filter direction
-!HISTORY_MSG_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!HISTORY_MSG_PRSHARPEN_CONTRAST;PRS - Contrast threshold
-!HISTORY_MSG_RAWCACORR_AUTOIT;Raw CA Correction - Iterations
-!HISTORY_MSG_RAWCACORR_COLORSHIFT;Raw CA Correction - Avoid color shift
-!HISTORY_MSG_RAW_BORDER;Raw border
-!HISTORY_MSG_RESIZE_ALLOWUPSCALING;Resize - Allow upscaling
-!HISTORY_MSG_SHARPENING_BLUR;Sharpening - Blur radius
-!HISTORY_MSG_SHARPENING_CONTRAST;Sharpening - Contrast threshold
-!HISTORY_MSG_SH_COLORSPACE;S/H - Colorspace
-!HISTORY_MSG_SOFTLIGHT_ENABLED;Soft light
-!HISTORY_MSG_SOFTLIGHT_STRENGTH;Soft light - Strength
-!HISTORY_MSG_TM_FATTAL_ANCHOR;DRC - Anchor
-!ICCPROFCREATOR_COPYRIGHT;Copyright:
-!ICCPROFCREATOR_COPYRIGHT_RESET_TOOLTIP;Reset to the default copyright, granted to "RawTherapee, CC0"
-!ICCPROFCREATOR_CUSTOM;Custom
-!ICCPROFCREATOR_DESCRIPTION;Description:
-!ICCPROFCREATOR_DESCRIPTION_ADDPARAM;Append gamma and slope values to the description
-!ICCPROFCREATOR_DESCRIPTION_TOOLTIP;Leave empty to set the default description.
-!ICCPROFCREATOR_GAMMA;Gamma
-!ICCPROFCREATOR_ICCVERSION;ICC version:
-!ICCPROFCREATOR_ILL;Illuminant:
-!ICCPROFCREATOR_ILL_41;D41
-!ICCPROFCREATOR_ILL_50;D50
-!ICCPROFCREATOR_ILL_55;D55
-!ICCPROFCREATOR_ILL_60;D60
-!ICCPROFCREATOR_ILL_65;D65
-!ICCPROFCREATOR_ILL_80;D80
-!ICCPROFCREATOR_ILL_DEF;Default
-!ICCPROFCREATOR_ILL_INC;StdA 2856K
-!ICCPROFCREATOR_ILL_TOOLTIP;You can only set the illuminant for ICC v4 profiles.
-!ICCPROFCREATOR_PRIMARIES;Primaries:
-!ICCPROFCREATOR_PRIM_ACESP0;ACES AP0
-!ICCPROFCREATOR_PRIM_ACESP1;ACES AP1
-!ICCPROFCREATOR_PRIM_ADOBE;Adobe RGB (1998)
-!ICCPROFCREATOR_PRIM_BEST;BestRGB
-!ICCPROFCREATOR_PRIM_BETA;BetaRGB
-!ICCPROFCREATOR_PRIM_BLUX;Blue X
-!ICCPROFCREATOR_PRIM_BLUY;Blue Y
-!ICCPROFCREATOR_PRIM_BRUCE;BruceRGB
-!ICCPROFCREATOR_PRIM_GREX;Green X
-!ICCPROFCREATOR_PRIM_GREY;Green Y
-!ICCPROFCREATOR_PRIM_PROPH;Prophoto
-!ICCPROFCREATOR_PRIM_REC2020;Rec2020
-!ICCPROFCREATOR_PRIM_REDX;Red X
-!ICCPROFCREATOR_PRIM_REDY;Red Y
-!ICCPROFCREATOR_PRIM_SRGB;sRGB
-!ICCPROFCREATOR_PRIM_TOOLTIP;You can only set custom primaries for ICC v4 profiles.
-!ICCPROFCREATOR_PRIM_WIDEG;Widegamut
-!ICCPROFCREATOR_PROF_V2;ICC v2
-!ICCPROFCREATOR_PROF_V4;ICC v4
-!ICCPROFCREATOR_SAVEDIALOG_TITLE;Save ICC profile as...
-!ICCPROFCREATOR_SLOPE;Slope
-!ICCPROFCREATOR_TRC_PRESET;Tone response curve:
-!IPTCPANEL_CATEGORYHINT;Identifies the subject of the image in the opinion of the provider.
-!IPTCPANEL_CITYHINT;Enter the name of the city pictured in this image.
-!IPTCPANEL_COPYRIGHT;Copyright notice
-!IPTCPANEL_COPYRIGHTHINT;Enter a Notice on the current owner of the Copyright for this image, such as ©2008 Jane Doe.
-!IPTCPANEL_COUNTRYHINT;Enter the name of the country pictured in this image.
-!IPTCPANEL_CREATOR;Creator
-!IPTCPANEL_CREATORHINT;Enter the name of the person that created this image.
-!IPTCPANEL_CREATORJOBTITLE;Creator's job title
-!IPTCPANEL_CREATORJOBTITLEHINT;Enter the Job Title of the person listed in the Creator field.
-!IPTCPANEL_DATECREATEDHINT;Enter the Date the image was taken.
-!IPTCPANEL_DESCRIPTION;Description
-!IPTCPANEL_DESCRIPTIONHINT;Enter a "caption" describing the who, what, and why of what is happening in this image, this might include names of people, and/or their role in the action that is taking place within the image.
-!IPTCPANEL_DESCRIPTIONWRITER;Description writer
-!IPTCPANEL_DESCRIPTIONWRITERHINT;Enter the name of the person involved in writing, editing or correcting the description of the image.
-!IPTCPANEL_HEADLINEHINT;Enter a brief publishable synopsis or summary of the contents of the image.
-!IPTCPANEL_INSTRUCTIONSHINT;Enter information about embargoes, or other restrictions not covered by the Copyright field.
-!IPTCPANEL_KEYWORDSHINT;Enter any number of keywords, terms or phrases used to express the subject matter in the image.
-!IPTCPANEL_PROVINCE;Province or state
-!IPTCPANEL_PROVINCEHINT;Enter the name of the province or state pictured in this image.
-!IPTCPANEL_SOURCEHINT;Enter or edit the name of a person or party who has a role in the content supply chain, such as a person or entity from whom you received this image from.
-!IPTCPANEL_SUPPCATEGORIES;Supplemental categories
-!IPTCPANEL_SUPPCATEGORIESHINT;Further refines the subject of the image.
-!IPTCPANEL_TITLEHINT;Enter a short verbal and human readable name for the image, this may be the file name.
-!IPTCPANEL_TRANSREFERENCE;Job ID
-!IPTCPANEL_TRANSREFERENCEHINT;Enter a number or identifier needed for workflow control or tracking.
-!MAIN_BUTTON_ICCPROFCREATOR;ICC Profile Creator
-!MAIN_BUTTON_SENDTOEDITOR;Edit image in external editor
-!MAIN_FRAME_PLACES_DEL;Remove
-!MAIN_MSG_TOOMANYOPENEDITORS;Too many open editors.\nPlease close an editor to continue.
-!MAIN_TAB_ADVANCED;Advanced
-!MAIN_TAB_ADVANCED_TOOLTIP;Shortcut: Alt-w
-!MAIN_TAB_FAVORITES;Favorites
-!MAIN_TAB_FAVORITES_TOOLTIP;Shortcut: Alt-u
-!MAIN_TAB_INSPECT; Inspect
-!MAIN_TOOLTIP_BACKCOLOR3;Background color of the preview: middle grey\nShortcut: 9
-!MAIN_TOOLTIP_PREVIEWSHARPMASK;Preview the sharpening contrast mask.\nShortcut: p\n\nOnly works when sharpening is enabled and zoom >= 100%.
-!MONITOR_PROFILE_SYSTEM;System default
-!OPTIONS_BUNDLED_MISSING;The bundled profile "%1" could not be found!\n\nYour installation could be damaged.\n\nDefault internal values will be used instead.
-!OPTIONS_DEFIMG_MISSING;The default profile for non-raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!OPTIONS_DEFRAW_MISSING;The default profile for raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!PARTIALPASTE_ADVANCEDGROUP;Advanced Settings
-!PARTIALPASTE_DEHAZE;Haze removal
-!PARTIALPASTE_EQUALIZER;Wavelet levels
-!PARTIALPASTE_LOCALCONTRAST;Local contrast
-!PARTIALPASTE_METADATA;Metadata mode
-!PARTIALPASTE_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!PARTIALPASTE_PRSHARPENING;Post-resize sharpening
-!PARTIALPASTE_RAWCACORR_AVOIDCOLORSHIFT;CA avoid color shift
-!PARTIALPASTE_RAWCACORR_CAREDBLUE;CA red & blue
-!PARTIALPASTE_RAW_BORDER;Raw border
-!PARTIALPASTE_RAW_IMAGENUM;Sub-image
-!PARTIALPASTE_RAW_PIXELSHIFT;Pixel Shift
-!PARTIALPASTE_RETINEX;Retinex
-!PARTIALPASTE_SOFTLIGHT;Soft light
-!PARTIALPASTE_TM_FATTAL;Dynamic range compression
-!PREFERENCES_APPEARANCE;Appearance
-!PREFERENCES_APPEARANCE_COLORPICKERFONT;Color picker font
-!PREFERENCES_APPEARANCE_CROPMASKCOLOR;Crop mask color
-!PREFERENCES_APPEARANCE_MAINFONT;Main font
-!PREFERENCES_APPEARANCE_THEME;Theme
-!PREFERENCES_AUTOSAVE_TP_OPEN;Save tool collapsed/expanded state on exit
-!PREFERENCES_CACHECLEAR;Clear
-!PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
-!PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
-!PREFERENCES_CACHECLEAR_ONLYPROFILES;Clear only cached processing profiles:
-!PREFERENCES_CACHECLEAR_SAFETY;Only files in the cache are cleared. Processing profiles stored alongside the source images are not touched.
-!PREFERENCES_CHUNKSIZES;Tiles per thread
-!PREFERENCES_CHUNKSIZE_RAW_AMAZE;AMaZE demosaic
-!PREFERENCES_CHUNKSIZE_RAW_CA;Raw CA correction
-!PREFERENCES_CHUNKSIZE_RAW_RCD;RCD demosaic
-!PREFERENCES_CHUNKSIZE_RAW_XT;Xtrans demosaic
-!PREFERENCES_CHUNKSIZE_RGB;RGB processing
-!PREFERENCES_CLUTSCACHE;HaldCLUT Cache
-!PREFERENCES_CLUTSCACHE_LABEL;Maximum number of cached CLUTs
-!PREFERENCES_CMMBPC;Black point compensation
-!PREFERENCES_CROP;Crop Editing
-!PREFERENCES_CROP_AUTO_FIT;Automatically zoom to fit the crop
-!PREFERENCES_CROP_GUIDES;Guides shown when not editing the crop
-!PREFERENCES_CROP_GUIDES_FRAME;Frame
-!PREFERENCES_CROP_GUIDES_FULL;Original
-!PREFERENCES_CROP_GUIDES_NONE;None
-!PREFERENCES_CURVEBBOXPOS;Position of curve copy & paste buttons
-!PREFERENCES_CURVEBBOXPOS_ABOVE;Above
-!PREFERENCES_CURVEBBOXPOS_BELOW;Below
-!PREFERENCES_CURVEBBOXPOS_LEFT;Left
-!PREFERENCES_CURVEBBOXPOS_RIGHT;Right
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_DIRECTORIES;Directories
-!PREFERENCES_EDITORCMDLINE;Custom command line
-!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
-!PREFERENCES_INSPECT_LABEL;Inspect
-!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
-!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
-!PREFERENCES_LANG;Language
-!PREFERENCES_MAXRECENTFOLDERS;Maximum number of recent folders
-!PREFERENCES_MONINTENT;Default rendering intent
-!PREFERENCES_MONITOR;Monitor
-!PREFERENCES_MONPROFILE;Default color profile
-!PREFERENCES_MONPROFILE_WARNOSX;Due to MacOS limitations, only sRGB is supported.
-!PREFERENCES_NAVIGATIONFRAME;Navigation
-!PREFERENCES_OVERLAY_FILENAMES_FILMSTRIP;Overlay filenames on thumbnails in the editor pannel
-!PREFERENCES_PARSEDEXTDOWNHINT;Move selected extension down in the list.
-!PREFERENCES_PARSEDEXTUPHINT;Move selected extension up in the list.
-!PREFERENCES_PERFORMANCE_MEASURE;Measure
-!PREFERENCES_PERFORMANCE_MEASURE_HINT;Logs processing times in console
-!PREFERENCES_PERFORMANCE_THREADS;Threads
-!PREFERENCES_PERFORMANCE_THREADS_LABEL;Maximum number of threads for Noise Reduction and Wavelet Levels (0 = Automatic)
-!PREFERENCES_PREVDEMO;Preview Demosaic Method
-!PREFERENCES_PREVDEMO_FAST;Fast
-!PREFERENCES_PREVDEMO_LABEL;Demosaicing method used for the preview at <100% zoom:
-!PREFERENCES_PREVDEMO_SIDECAR;As in PP3
-!PREFERENCES_PRINTER;Printer (Soft-Proofing)
-!PREFERENCES_PROFILESAVEBOTH;Save processing profile both to the cache and next to the input file
-!PREFERENCES_PROFILESAVELOCATION;Processing profile saving location
-!PREFERENCES_PROFILE_NONE;None
-!PREFERENCES_PRTINTENT;Rendering intent
-!PREFERENCES_PRTPROFILE;Color profile
-!PREFERENCES_REMEMBERZOOMPAN;Remember zoom % and pan offset
-!PREFERENCES_REMEMBERZOOMPAN_TOOLTIP;Remember the zoom % and pan offset of the current image when opening a new image.\n\nThis option only works in "Single Editor Tab Mode" and when "Demosaicing method used for the preview at <100% zoom" is set to "As in PP3".
-!PREFERENCES_SAVE_TP_OPEN_NOW;Save tool collapsed/expanded state now
-!PREFERENCES_SERIALIZE_TIFF_READ;TIFF Read Settings
-!PREFERENCES_SERIALIZE_TIFF_READ_LABEL;Serialize reading of TIFF files
-!PREFERENCES_SERIALIZE_TIFF_READ_TOOLTIP;Enabling this option when working with folders containing uncompressed TIFF files can increase performance of thumbnail generation.
-!PREFERENCES_SHOWFILMSTRIPTOOLBAR;Show Filmstrip toolbar
-!PREFERENCES_TAB_DYNAMICPROFILE;Dynamic Profile Rules
-!PREFERENCES_TAB_PERFORMANCE;Performance
-!PREFERENCES_THUMBNAIL_INSPECTOR_JPEG;Embedded JPEG preview
-!PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
-!PROFILEPANEL_PDYNAMIC;Dynamic
-!PROGRESSBAR_DECODING;Decoding...
-!PROGRESSBAR_GREENEQUIL;Green equilibration...
-!PROGRESSBAR_HLREC;Highlight reconstruction...
-!PROGRESSBAR_HOTDEADPIXELFILTER;Hot/dead pixel filter...
-!PROGRESSBAR_LINEDENOISE;Line noise filter...
-!PROGRESSBAR_RAWCACORR;Raw CA correction...
-!QINFO_FRAMECOUNT;%2 frames
-!QINFO_HDR;HDR / %2 frame(s)
-!QINFO_PIXELSHIFT;Pixel Shift / %2 frame(s)
-!SAMPLEFORMAT_0;Unknown data format
-!SAMPLEFORMAT_1;8-bit unsigned
-!SAMPLEFORMAT_2;16-bit unsigned
-!SAMPLEFORMAT_4;24-bit LogLuv
-!SAMPLEFORMAT_8;32-bit LogLuv
-!SAMPLEFORMAT_16;16-bit floating-point
-!SAMPLEFORMAT_32;24-bit floating-point
-!SAMPLEFORMAT_64;32-bit floating-point
-!SAVEDLG_FILEFORMAT_FLOAT; floating-point
-!SAVEDLG_SUBSAMP_TOOLTIP;Best compression:\nJ:a:b 4:2:0\nh/v 2/2\nChroma halved horizontally and vertically.\n\nBalanced:\nJ:a:b 4:2:2\nh/v 2/1\nChroma halved horizontally.\n\nBest quality:\nJ:a:b 4:4:4\nh/v 1/1\nNo chroma subsampling.
-!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
-!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
-!TP_BWMIX_MIXC;Channel Mixer
-!TP_BWMIX_NEUTRAL;Reset
-!TP_CBDL_AFT;After Black-and-White
-!TP_CBDL_BEF;Before Black-and-White
-!TP_CBDL_METHOD;Process located
-!TP_CBDL_METHOD_TOOLTIP;Choose whether the Contrast by Detail Levels tool is to be positioned after the Black-and-White tool, which makes it work in L*a*b* space, or before it, which makes it work in RGB space.
-!TP_COLORAPP_ABSOLUTELUMINANCE;Absolute luminance
-!TP_COLORAPP_CAT02ADAPTATION_TOOLTIP;When setting manually, values above 65 are recommended.
-!TP_COLORAPP_FREE;Free temp+green + CAT02 + [output]
-!TP_COLORAPP_MEANLUMINANCE;Mean luminance (Yb%)
-!TP_COLORAPP_NEUTRAL;Reset
-!TP_COLORAPP_NEUTRAL_TIP;Reset all sliders checkbox and curves to their default values
-!TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD50 temp=5003\nD55 temp=5503\nD65 temp=6504\nD75 temp=7504
-!TP_COLORTONING_LABGRID;L*a*b* color correction grid
-!TP_COLORTONING_LABGRID_VALUES;HL: a=%1 b=%2\nS: a=%3 b=%4
-!TP_COLORTONING_LABREGIONS;Color correction regions
-!TP_COLORTONING_LABREGION_ABVALUES;a=%1 b=%2
-!TP_COLORTONING_LABREGION_CHANNEL;Channel
-!TP_COLORTONING_LABREGION_CHANNEL_ALL;All
-!TP_COLORTONING_LABREGION_CHANNEL_B;Blue
-!TP_COLORTONING_LABREGION_CHANNEL_G;Green
-!TP_COLORTONING_LABREGION_CHANNEL_R;Red
-!TP_COLORTONING_LABREGION_CHROMATICITYMASK;C
-!TP_COLORTONING_LABREGION_HUEMASK;H
-!TP_COLORTONING_LABREGION_LIGHTNESS;Lightness
-!TP_COLORTONING_LABREGION_LIGHTNESSMASK;L
-!TP_COLORTONING_LABREGION_LIST_TITLE;Correction
-!TP_COLORTONING_LABREGION_MASK;Mask
-!TP_COLORTONING_LABREGION_MASKBLUR;Mask Blur
-!TP_COLORTONING_LABREGION_OFFSET;Offset
-!TP_COLORTONING_LABREGION_POWER;Power
-!TP_COLORTONING_LABREGION_SATURATION;Saturation
-!TP_COLORTONING_LABREGION_SHOWMASK;Show mask
-!TP_COLORTONING_LABREGION_SLOPE;Slope
-!TP_CROP_GTHARMMEANS;Harmonic Means
-!TP_CROP_GTTRIANGLE1;Golden Triangles 1
-!TP_CROP_GTTRIANGLE2;Golden Triangles 2
-!TP_CROP_PPI;PPI
-!TP_CROP_RESETCROP;Reset
-!TP_CROP_SELECTCROP;Select
-!TP_DEHAZE_DEPTH;Depth
-!TP_DEHAZE_LABEL;Haze Removal
-!TP_DEHAZE_SHOW_DEPTH_MAP;Show depth map
-!TP_DEHAZE_STRENGTH;Strength
-!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
-!TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominance
-!TP_DIRPYRDENOISE_CHROMINANCE_MANUAL;Manual
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD;Method
-!TP_DIRPYRDENOISE_CHROMINANCE_METHODADVANCED_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nAutomatic multi-zones\nNo preview - works only during saving, but using the "Preview" method by matching the tile size and center to the preview size and center you can get an idea of the expected results.\nThe image is divided into tiles (about 10 to 70 depending on image size) and each tile receives its own chrominance noise reduction settings.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_PMZ;Preview multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW;Preview
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEWRESIDUAL_INFO_TOOLTIP;Displays the remaining noise levels of the part of the image visible in the preview after wavelet.\n\n>300 Very noisy\n100-300 Noisy\n50-100 A little noisy\n<50 Very low noise\n\nBeware, the values will differ between RGB and L*a*b* mode. The RGB values are less accurate because the RGB mode does not completely separate luminance and chrominance.
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_INFO;Preview size=%1, Center: Px=%2 Py=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Preview noise: Mean=%1 High=%2
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= - High= -
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2 Ty=%3
-!TP_DIRPYRDENOISE_LABEL;Noise Reduction
-!TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
-!TP_DIRPYRDENOISE_LUMINANCE_FRAME;Luminance
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_CHROMINANCE;Chroma only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_WEIGHTED;Weighted L* (little) + a*b* (normal)
-!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
-!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
-!TP_DIRPYRDENOISE_TYPE_3X3;3×3
-!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
-!TP_DIRPYRDENOISE_TYPE_5X5;5×5
-!TP_DIRPYRDENOISE_TYPE_5X5SOFT;5×5 soft
-!TP_DIRPYRDENOISE_TYPE_7X7;7×7
-!TP_DIRPYRDENOISE_TYPE_9X9;9×9
-!TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts
-!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
-!TP_EPD_GAMMA;Gamma
-!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
-!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
-!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
-!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
-!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual
-!TP_FILMSIMULATION_SLOWPARSEDIR;RawTherapee is configured to look for Hald CLUT images, which are used for the Film Simulation tool, in a folder which is taking too long to load.\nGo to Preferences > Image Processing > Film Simulation\nto see which folder is being used. You should either point RawTherapee to a folder which contains only Hald CLUT images and nothing more, or to an empty folder if you don't want to use the Film Simulation tool.\n\nRead the Film Simulation article in RawPedia for more information.\n\nDo you want to cancel the scan now?
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Baseline exposure
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET_TOOLTIP;Employ the embedded DCP baseline exposure offset. The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYHUESATMAP;Base table
-!TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYLOOKTABLE;Look table
-!TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-!TP_ICM_BPC;Black Point Compensation
-!TP_ICM_PROFILEINTENT;Rendering Intent
-!TP_ICM_SAVEREFERENCE;Save Reference Image
-!TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance
-!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles.
-!TP_ICM_WORKING_TRC;Tone response curve:
-!TP_ICM_WORKING_TRC_CUSTOM;Custom
-!TP_ICM_WORKING_TRC_GAMMA;Gamma
-!TP_ICM_WORKING_TRC_NONE;None
-!TP_ICM_WORKING_TRC_SLOPE;Slope
-!TP_ICM_WORKING_TRC_TOOLTIP;Only for built-in profiles.
-!TP_LENSPROFILE_CORRECTION_AUTOMATCH;Automatically selected
-!TP_LENSPROFILE_CORRECTION_LCPFILE;LCP file
-!TP_LENSPROFILE_CORRECTION_MANUAL;Manually selected
-!TP_LENSPROFILE_LENS_WARNING;Warning: the crop factor used for lens profiling is larger than the crop factor of the camera, the results might be wrong.
-!TP_LENSPROFILE_MODE_HEADER;Lens Profile
-!TP_LENSPROFILE_USE_CA;Chromatic aberration
-!TP_LENSPROFILE_USE_GEOMETRIC;Geometric distortion
-!TP_LENSPROFILE_USE_HEADER;Correct
-!TP_LENSPROFILE_USE_VIGNETTING;Vignetting
-!TP_LOCALCONTRAST_AMOUNT;Amount
-!TP_LOCALCONTRAST_DARKNESS;Darkness level
-!TP_LOCALCONTRAST_LABEL;Local Contrast
-!TP_LOCALCONTRAST_LIGHTNESS;Lightness level
-!TP_LOCALCONTRAST_RADIUS;Radius
-!TP_METADATA_EDIT;Apply modifications
-!TP_METADATA_MODE;Metadata copy mode
-!TP_METADATA_STRIP;Strip all metadata
-!TP_METADATA_TUNNEL;Copy unchanged
-!TP_NEUTRAL;Reset
-!TP_PREPROCESS_LINEDENOISE_DIRECTION;Direction
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_BOTH;Both
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_HORIZONTAL;Horizontal
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_PDAF_LINES;Horizontal only on PDAF rows
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_VERTICAL;Vertical
-!TP_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!TP_PRSHARPENING_LABEL;Post-Resize Sharpening
-!TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions.
-!TP_RAWCACORR_AUTOIT;Iterations
-!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
-!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CASTR;Strength
-!TP_RAW_1PASSMEDIUM;1-pass (Markesteijn)
-!TP_RAW_2PASS;1-pass+fast
-!TP_RAW_3PASSBEST;3-pass (Markesteijn)
-!TP_RAW_4PASS;3-pass+fast
-!TP_RAW_AHD;AHD
-!TP_RAW_AMAZE;AMaZE
-!TP_RAW_AMAZEVNG4;AMaZE+VNG4
-!TP_RAW_BORDER;Border
-!TP_RAW_DCB;DCB
-!TP_RAW_DCBVNG4;DCB+VNG4
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST;Auto threshold
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST_TOOLTIP;If the checkbox is checked (recommended), RawTherapee calculates an optimum value based on flat regions in the image.\nIf there is no flat region in the image or the image is too noisy, the value will be set to 0.\nTo set the value manually, uncheck the checkbox first (reasonable values depend on the image).
-!TP_RAW_DUALDEMOSAICCONTRAST;Contrast threshold
-!TP_RAW_EAHD;EAHD
-!TP_RAW_FAST;Fast
-!TP_RAW_HD;Threshold
-!TP_RAW_HD_TOOLTIP;Lower values make hot/dead pixel detection more aggressive, but false positives may lead to artifacts. If you notice any artifacts appearing when enabling the Hot/Dead Pixel Filters, gradually increase the threshold value until they disappear.
-!TP_RAW_HPHD;HPHD
-!TP_RAW_IGV;IGV
-!TP_RAW_IMAGENUM;Sub-image
-!TP_RAW_IMAGENUM_SN;SN mode
-!TP_RAW_IMAGENUM_TOOLTIP;Some raw files consist of several sub-images (Pentax/Sony Pixel Shift, Pentax 3-in-1 HDR, Canon Dual Pixel, Fuji EXR).\n\nWhen using any demosaicing method other than Pixel Shift, this selects which sub-image is used.\n\nWhen using the Pixel Shift demosaicing method on a Pixel Shift raw, all sub-images are used, and this selects which sub-image should be used for moving parts.
-!TP_RAW_LMMSE;LMMSE
-!TP_RAW_MONO;Mono
-!TP_RAW_NONE;None (Shows sensor pattern)
-!TP_RAW_PIXELSHIFT;Pixel Shift
-!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
-!TP_RAW_PIXELSHIFTDMETHOD;Demosaic method for motion
-!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
-!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
-!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
-!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
-!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
-!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
-!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
-!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
-!TP_RAW_PIXELSHIFTMM_OFF;Off
-!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
-!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
-!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
-!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
-!TP_RAW_PIXELSHIFTSIGMA;Blur radius
-!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
-!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
-!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
-!TP_RAW_RCD;RCD
-!TP_RAW_RCDVNG4;RCD+VNG4
-!TP_RAW_VNG4;VNG4
-!TP_RAW_XTRANS;X-Trans
-!TP_RAW_XTRANSFAST;Fast X-Trans
-!TP_RESIZE_ALLOW_UPSCALING;Allow Upscaling
-!TP_RETINEX_CONTEDIT_HSL;HSL histogram
-!TP_RETINEX_CONTEDIT_LAB;L*a*b* histogram
-!TP_RETINEX_CONTEDIT_LH;Hue
-!TP_RETINEX_CONTEDIT_MAP;Equalizer
-!TP_RETINEX_CURVEEDITOR_CD;L=f(L)
-!TP_RETINEX_CURVEEDITOR_CD_TOOLTIP;Luminance according to luminance L=f(L)\nCorrect raw data to reduce halos and artifacts.
-!TP_RETINEX_CURVEEDITOR_LH;Strength=f(H)
-!TP_RETINEX_CURVEEDITOR_LH_TOOLTIP;Strength according to hue Strength=f(H)\nThis curve also acts on chroma when using the "Highlight" retinex method.
-!TP_RETINEX_CURVEEDITOR_MAP;L=f(L)
-!TP_RETINEX_CURVEEDITOR_MAP_TOOLTIP;This curve can be applied alone or with a Gaussian mask or wavelet mask.\nBeware of artifacts!
-!TP_RETINEX_EQUAL;Equalizer
-!TP_RETINEX_FREEGAMMA;Free gamma
-!TP_RETINEX_GAIN;Gain
-!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
-!TP_RETINEX_GAINTRANSMISSION;Gain transmission
-!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
-!TP_RETINEX_GAMMA;Gamma
-!TP_RETINEX_GAMMA_FREE;Free
-!TP_RETINEX_GAMMA_HIGH;High
-!TP_RETINEX_GAMMA_LOW;Low
-!TP_RETINEX_GAMMA_MID;Middle
-!TP_RETINEX_GAMMA_NONE;None
-!TP_RETINEX_GAMMA_TOOLTIP;Restore tones by applying gamma before and after Retinex. Different from Retinex curves or others curves (Lab, Exposure, etc.).
-!TP_RETINEX_GRAD;Transmission gradient
-!TP_RETINEX_GRADS;Strength gradient
-!TP_RETINEX_GRADS_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Strength is reduced when iterations increase, and conversely.
-!TP_RETINEX_GRAD_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Variance and Threshold are reduced when iterations increase, and conversely.
-!TP_RETINEX_HIGH;High
-!TP_RETINEX_HIGHLIG;Highlight
-!TP_RETINEX_HIGHLIGHT;Highlight threshold
-!TP_RETINEX_HIGHLIGHT_TOOLTIP;Increase action of High algorithm.\nMay require you to re-adjust "Neighboring pixels" and to increase the "White-point correction" in the Raw tab -> Raw White Points tool.
-!TP_RETINEX_HSLSPACE_LIN;HSL-Linear
-!TP_RETINEX_HSLSPACE_LOG;HSL-Logarithmic
-!TP_RETINEX_ITER;Iterations (Tone-mapping)
-!TP_RETINEX_ITERF;Tone mapping
-!TP_RETINEX_ITER_TOOLTIP;Simulate a tone-mapping operator.\nHigh values increase the processing time.
-!TP_RETINEX_LABEL;Retinex
-!TP_RETINEX_LABEL_MASK;Mask
-!TP_RETINEX_LABSPACE;L*a*b*
-!TP_RETINEX_LOW;Low
-!TP_RETINEX_MAP;Method
-!TP_RETINEX_MAP_GAUS;Gaussian mask
-!TP_RETINEX_MAP_MAPP;Sharp mask (wavelet partial)
-!TP_RETINEX_MAP_MAPT;Sharp mask (wavelet total)
-!TP_RETINEX_MAP_METHOD_TOOLTIP;Use the mask generated by the Gaussian function above (Radius, Method) to reduce halos and artifacts.\n\nCurve only: apply a diagonal contrast curve on the mask.\nBeware of artifacts!\n\nGaussian mask: generate and use a Gaussian blur of the original mask.\nQuick.\n\nSharp mask: generate and use a wavelet on the original mask.\nSlow.
-!TP_RETINEX_MAP_NONE;None
-!TP_RETINEX_MEDIAN;Transmission median filter
-!TP_RETINEX_METHOD;Method
-!TP_RETINEX_METHOD_TOOLTIP;Low = Reinforce low light.\nUniform = Equalize action.\nHigh = Reinforce high light.\nHighlights = Remove magenta in highlights.
-!TP_RETINEX_MLABEL;Restored haze-free Min=%1 Max=%2
-!TP_RETINEX_MLABEL_TOOLTIP;Should be near min=0 max=32768\nRestored image with no mixture.
-!TP_RETINEX_NEIGHBOR;Radius
-!TP_RETINEX_NEUTRAL;Reset
-!TP_RETINEX_NEUTRAL_TIP;Reset all sliders and curves to their default values.
-!TP_RETINEX_OFFSET;Offset (brightness)
-!TP_RETINEX_SCALES;Gaussian gradient
-!TP_RETINEX_SCALES_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Scale and radius are reduced when iterations increase, and conversely.
-!TP_RETINEX_SETTINGS;Settings
-!TP_RETINEX_SKAL;Scale
-!TP_RETINEX_SLOPE;Free gamma slope
-!TP_RETINEX_STRENGTH;Strength
-!TP_RETINEX_THRESHOLD;Threshold
-!TP_RETINEX_THRESHOLD_TOOLTIP;Limits in/out.\nIn = image source,\nOut = image gauss.
-!TP_RETINEX_TLABEL;TM Min=%1 Max=%2 Mean=%3 Sigma=%4
-!TP_RETINEX_TLABEL2;TM Tm=%1 TM=%2
-!TP_RETINEX_TLABEL_TOOLTIP;Transmission map result.\nMin and Max are used by Variance.\nMean and Sigma.\nTm=Min TM=Max of transmission map.
-!TP_RETINEX_TRANF;Transmission
-!TP_RETINEX_TRANSMISSION;Transmission map
-!TP_RETINEX_TRANSMISSION_TOOLTIP;Transmission according to transmission.\nAbscissa: transmission from negative values (min), mean, and positives values (max).\nOrdinate: amplification or reduction.
-!TP_RETINEX_UNIFORM;Uniform
-!TP_RETINEX_VARIANCE;Contrast
-!TP_RETINEX_VARIANCE_TOOLTIP;Low variance increase local contrast and saturation, but can lead to artifacts.
-!TP_RETINEX_VIEW;Process
-!TP_RETINEX_VIEW_MASK;Mask
-!TP_RETINEX_VIEW_METHOD_TOOLTIP;Standard - Normal display.\nMask - Displays the mask.\nUnsharp mask - Displays the image with a high radius unsharp mask.\nTransmission - Auto/Fixed - Displays the file transmission-map, before any action on contrast and brightness.\n\nAttention: the mask does not correspond to reality, but is amplified to make it more visible.
-!TP_RETINEX_VIEW_NONE;Standard
-!TP_RETINEX_VIEW_TRAN;Transmission - Auto
-!TP_RETINEX_VIEW_TRAN2;Transmission - Fixed
-!TP_RETINEX_VIEW_UNSHARP;Unsharp mask
-!TP_SHARPENING_BLUR;Blur radius
-!TP_SHARPENING_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_CONTRAST;Contrast threshold
-!TP_SOFTLIGHT_LABEL;Soft Light
-!TP_SOFTLIGHT_STRENGTH;Strength
-!TP_TM_FATTAL_AMOUNT;Amount
-!TP_TM_FATTAL_ANCHOR;Anchor
-!TP_TM_FATTAL_LABEL;Dynamic Range Compression
-!TP_TM_FATTAL_THRESHOLD;Detail
-!TP_WAVELET_1;Level 1
-!TP_WAVELET_2;Level 2
-!TP_WAVELET_3;Level 3
-!TP_WAVELET_4;Level 4
-!TP_WAVELET_5;Level 5
-!TP_WAVELET_6;Level 6
-!TP_WAVELET_7;Level 7
-!TP_WAVELET_8;Level 8
-!TP_WAVELET_9;Level 9
-!TP_WAVELET_APPLYTO;Apply To
-!TP_WAVELET_AVOID;Avoid color shift
-!TP_WAVELET_B0;Black
-!TP_WAVELET_B1;Grey
-!TP_WAVELET_B2;Residual
-!TP_WAVELET_BACKGROUND;Background
-!TP_WAVELET_BACUR;Curve
-!TP_WAVELET_BALANCE;Contrast balance d/v-h
-!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified.
-!TP_WAVELET_BALCHRO;Chroma balance
-!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance.
-!TP_WAVELET_BANONE;None
-!TP_WAVELET_BASLI;Slider
-!TP_WAVELET_BATYPE;Contrast balance method
-!TP_WAVELET_CBENAB;Toning and Color Balance
-!TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted
-!TP_WAVELET_CCURVE;Local contrast
-!TP_WAVELET_CH1;Whole chroma range
-!TP_WAVELET_CH2;Saturated/pastel
-!TP_WAVELET_CH3;Link contrast levels
-!TP_WAVELET_CHCU;Curve
-!TP_WAVELET_CHR;Chroma-contrast link strength
-!TP_WAVELET_CHRO;Saturated/pastel threshold
-!TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored.
-!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength"
-!TP_WAVELET_CHSL;Sliders
-!TP_WAVELET_CHTYPE;Chrominance method
-!TP_WAVELET_COLORT;Opacity Red-Green
-!TP_WAVELET_COMPCONT;Contrast
-!TP_WAVELET_COMPGAMMA;Compression gamma
-!TP_WAVELET_COMPGAMMA_TOOLTIP;Adjusting the gamma of the residual image allows you to equilibrate the data and histogram.
-!TP_WAVELET_COMPTM;Tone mapping
-!TP_WAVELET_CONTEDIT;'After' contrast curve
-!TP_WAVELET_CONTR;Gamut
-!TP_WAVELET_CONTRA;Contrast
-!TP_WAVELET_CONTRAST_MINUS;Contrast -
-!TP_WAVELET_CONTRAST_PLUS;Contrast +
-!TP_WAVELET_CONTRA_TOOLTIP;Changes contrast of the residual image.
-!TP_WAVELET_CTYPE;Chrominance control
-!TP_WAVELET_CURVEEDITOR_CC_TOOLTIP;Modifies local contrast as a function of the original local contrast (abscissa).\nLow abscissa values represent small local contrast (real values about 10..20).\n50% abscissa represents average local contrast (real value about 100..300).\n66% abscissa represents standard deviation of local contrast (real value about 300..800).\n100% abscissa represents maximum local contrast (real value about 3000..8000).
-!TP_WAVELET_CURVEEDITOR_CH;Contrast levels=f(Hue)
-!TP_WAVELET_CURVEEDITOR_CH_TOOLTIP;Modifies each level's contrast as a function of hue.\nTake care not to overwrite changes made with the Gamut sub-tool's hue controls.\nThe curve will only have an effect when wavelet contrast level sliders are non-zero.
-!TP_WAVELET_CURVEEDITOR_CL;L
-!TP_WAVELET_CURVEEDITOR_CL_TOOLTIP;Applies a final contrast luminance curve at the end of the wavelet treatment.
-!TP_WAVELET_CURVEEDITOR_HH;HH
-!TP_WAVELET_CURVEEDITOR_HH_TOOLTIP;Modifies the residual image's hue as a function of hue.
-!TP_WAVELET_DALL;All directions
-!TP_WAVELET_DAUB;Edge performance
-!TP_WAVELET_DAUB2;D2 - low
-!TP_WAVELET_DAUB4;D4 - standard
-!TP_WAVELET_DAUB6;D6 - standard plus
-!TP_WAVELET_DAUB10;D10 - medium
-!TP_WAVELET_DAUB14;D14 - high
-!TP_WAVELET_DAUB_TOOLTIP;Changes Daubechies coefficients:\nD4 = Standard,\nD14 = Often best performance, 10% more time-intensive.\n\nAffects edge detection as well as the general quality of the firsts levels. However the quality is not strictly related to this coefficient and can vary with images and uses.
-!TP_WAVELET_DONE;Vertical
-!TP_WAVELET_DTHR;Diagonal
-!TP_WAVELET_DTWO;Horizontal
-!TP_WAVELET_EDCU;Curve
-!TP_WAVELET_EDGCONT;Local contrast
-!TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, top-left, top-right and bottom-right represent respectively local contrast for low values, mean, mean+stdev and maxima.
-!TP_WAVELET_EDGE;Edge Sharpness
-!TP_WAVELET_EDGEAMPLI;Base amplification
-!TP_WAVELET_EDGEDETECT;Gradient sensitivity
-!TP_WAVELET_EDGEDETECTTHR;Threshold low (noise)
-!TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection)
-!TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky.
-!TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise.
-!TP_WAVELET_EDGESENSI;Edge sensitivity
-!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
-!TP_WAVELET_EDGTHRESH;Detail
-!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
-!TP_WAVELET_EDRAD;Radius
-!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
-!TP_WAVELET_EDSL;Threshold Sliders
-!TP_WAVELET_EDTYPE;Local contrast method
-!TP_WAVELET_EDVAL;Strength
-!TP_WAVELET_FINAL;Final Touchup
-!TP_WAVELET_FINEST;Finest
-!TP_WAVELET_HIGHLIGHT;Highlight luminance range
-!TP_WAVELET_HS1;Whole luminance range
-!TP_WAVELET_HS2;Shadows/Highlights
-!TP_WAVELET_HUESKIN;Skin hue
-!TP_WAVELET_HUESKIN_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_HUESKY;Sky hue
-!TP_WAVELET_HUESKY_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_ITER;Delta balance levels
-!TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels.
-!TP_WAVELET_LABEL;Wavelet Levels
-!TP_WAVELET_LARGEST;Coarsest
-!TP_WAVELET_LEVCH;Chroma
-!TP_WAVELET_LEVDIR_ALL;All levels in all directions
-!TP_WAVELET_LEVDIR_INF;Below or equal the level
-!TP_WAVELET_LEVDIR_ONE;One level
-!TP_WAVELET_LEVDIR_SUP;Above the level
-!TP_WAVELET_LEVELS;Wavelet levels
-!TP_WAVELET_LEVELS_TOOLTIP;Choose the number of detail levels the image is to be decomposed into. More levels require more RAM and require a longer processing time.
-!TP_WAVELET_LEVF;Contrast
-!TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1
-!TP_WAVELET_LEVONE;Level 2
-!TP_WAVELET_LEVTHRE;Level 4
-!TP_WAVELET_LEVTWO;Level 3
-!TP_WAVELET_LEVZERO;Level 1
-!TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength
-!TP_WAVELET_LIPST;Enhanced algoritm
-!TP_WAVELET_LOWLIGHT;Shadow luminance range
-!TP_WAVELET_MEDGREINF;First level
-!TP_WAVELET_MEDI;Reduce artifacts in blue sky
-!TP_WAVELET_MEDILEV;Edge detection
-!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine.
-!TP_WAVELET_NEUTRAL;Neutral
-!TP_WAVELET_NOIS;Denoise
-!TP_WAVELET_NOISE;Denoise and Refine
-!TP_WAVELET_NPHIGH;High
-!TP_WAVELET_NPLOW;Low
-!TP_WAVELET_NPNONE;None
-!TP_WAVELET_NPTYPE;Neighboring pixels
-!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced.
-!TP_WAVELET_OPACITY;Opacity Blue-Yellow
-!TP_WAVELET_OPACITYW;Contrast balance d/v-h curve
-!TP_WAVELET_OPACITYWL;Final local contrast
-!TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right.
-!TP_WAVELET_PASTEL;Pastel chroma
-!TP_WAVELET_PROC;Process
-!TP_WAVELET_RE1;Reinforced
-!TP_WAVELET_RE2;Unchanged
-!TP_WAVELET_RE3;Reduced
-!TP_WAVELET_RESCHRO;Chroma
-!TP_WAVELET_RESCON;Shadows
-!TP_WAVELET_RESCONH;Highlights
-!TP_WAVELET_RESID;Residual Image
-!TP_WAVELET_SAT;Saturated chroma
-!TP_WAVELET_SETTINGS;Wavelet Settings
-!TP_WAVELET_SKIN;Skin targetting/protection
-!TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_WAVELET_SKY;Sky targetting/protection
-!TP_WAVELET_SKY_TOOLTIP;At -100 sky-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 sky-tones are protected while all other tones are affected.
-!TP_WAVELET_STREN;Strength
-!TP_WAVELET_STRENGTH;Strength
-!TP_WAVELET_SUPE;Extra
-!TP_WAVELET_THR;Shadows threshold
-!TP_WAVELET_THRESHOLD;Highlight levels
-!TP_WAVELET_THRESHOLD2;Shadow levels
-!TP_WAVELET_THRESHOLD2_TOOLTIP;Only levels between 9 and 9 minus the value will be affected by the shadow luminance range. Other levels will be fully treated. The highest level possible is limited by the highlight level value (9 minus highlight level value).
-!TP_WAVELET_THRESHOLD_TOOLTIP;Only levels beyond the chosen value will be affected by the highlight luminance range. Other levels will be fully treated. The chosen value here limits the highest possible value of the shadow levels.
-!TP_WAVELET_THRH;Highlights threshold
-!TP_WAVELET_TILESBIG;Big tiles
-!TP_WAVELET_TILESFULL;Full image
-!TP_WAVELET_TILESIZE;Tiling method
-!TP_WAVELET_TILESLIT;Little tiles
-!TP_WAVELET_TILES_TOOLTIP;Processing the full image leads to better quality and is the recommended option, while using tiles is a fall-back solution for users with little RAM. Refer to RawPedia for memory requirements.
-!TP_WAVELET_TMSTRENGTH;Compression strength
-!TP_WAVELET_TMSTRENGTH_TOOLTIP;Control the strength of tone mapping or contrast compression of the residual image. When the value is different from 0, the Strength and Gamma sliders of the Tone Mapping tool in the Exposure tab will become grayed out.
-!TP_WAVELET_TMTYPE;Compression method
-!TP_WAVELET_TON;Toning
-!TP_WBALANCE_PICKER;Pick
-!TP_WBALANCE_TEMPBIAS;AWB temperature bias
-!TP_WBALANCE_TEMPBIAS_TOOLTIP;Allows to alter the computation of the "auto white balance"\nby biasing it towards warmer or cooler temperatures. The bias\nis expressed as a percentage of the computed temperature,\nso that the result is given by "computedTemp + computedTemp * bias".
diff --git a/rtdata/languages/Portugues b/rtdata/languages/Portugues
index 130e53d42..24c41dd53 100644
--- a/rtdata/languages/Portugues
+++ b/rtdata/languages/Portugues
@@ -98,7 +98,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Ignorar etapas de melhoramento LMMSE [raw]
EXPORT_BYPASS_SHARPENEDGE;Ignorar nitidez das bordas
EXPORT_BYPASS_SHARPENING;Ignorar nitidez
EXPORT_BYPASS_SHARPENMICRO;Ignorar microcontraste
-EXPORT_BYPASS_SH_HQ;Ignorar sombras/altas luzes da máscara de nitidez
EXPORT_FASTEXPORTOPTIONS;Opções de exportação rápida
EXPORT_INSTRUCTIONS;As opções de exportação rápida fornecem substituições para poupar tempo e recursos consumidos no desenvolvimento de configurações e na execução do processamento de filas utilizando configurações de exportação rápida. Este método é recomendado para gerar rapidamente imagens de baixa resolução, quando a velocidade é uma prioridade ou quando se quer uma saída redimensionada para uma ou mais imagens sem fazer alterações nos parâmetros de desenvolvimento guardados.
EXPORT_MAXHEIGHT;Altura máxima:
@@ -111,7 +110,6 @@ EXPORT_USE_FAST_PIPELINE_TIP;Usar uma preparação de processamento dedicado par
EXPORT_USE_NORMAL_PIPELINE;Padrão (ignorar algumas etapas, redimensionar no fim)
EXTPROGTARGET_1;raw
EXTPROGTARGET_2;processado na fila
-FILEBROWSER_ADDDELTEMPLATE;Adicionar/eliminar modelos...
FILEBROWSER_APPLYPROFILE;Aplicar
FILEBROWSER_APPLYPROFILE_PARTIAL;Aplicar - parcial
FILEBROWSER_AUTODARKFRAME;Fotograma escuro automático
@@ -1052,7 +1050,6 @@ PREFERENCES_BEHADDALLHINT;Definir todos os parâmetros para o modo adicionar<
PREFERENCES_BEHAVIOR;Comportamento
PREFERENCES_BEHSETALL;Tudo para 'aplicar'
PREFERENCES_BEHSETALLHINT;Definir todos os parâmetros para o modo aplicar.\nOs ajustes dos parâmetros no painel de ferramentas em lote serão absolutos, serão mostrados os valores reais.
-PREFERENCES_BLACKBODY;Tungsténio
PREFERENCES_CACHECLEAR;Eliminar
PREFERENCES_CACHECLEAR_ALL;Eliminar todos os ficheiros em cache:
PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Eliminar todos os ficheiros em cache excepto os perfis de processamento em cache:
@@ -1089,11 +1086,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Formato das chaves
PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Nome
PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;Identificador da etiqueta
PREFERENCES_CUSTPROFBUILDPATH;Caminho do executável
-PREFERENCES_D50;Configurações no menu principal
-PREFERENCES_D50_OLD;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
PREFERENCES_DARKFRAMEFOUND;Encontrado
PREFERENCES_DARKFRAMESHOTS;disparos
PREFERENCES_DARKFRAMETEMPLATES;modelos
@@ -1116,32 +1108,15 @@ PREFERENCES_FLATFIELDFOUND;Encontrado
PREFERENCES_FLATFIELDSDIR;Pasta de campos planos
PREFERENCES_FLATFIELDSHOTS;disparos
PREFERENCES_FLATFIELDTEMPLATES;modelos
-PREFERENCES_FLUOF2;Fluorescente F2
-PREFERENCES_FLUOF7;Fluorescente F7
-PREFERENCES_FLUOF11;Fluorescente F11
PREFERENCES_FORIMAGE;Para fotos não-raw
PREFERENCES_FORRAW;Para fotos raw
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Usar a mesma altura das miniaturas na película de fotografias e no navegador de ficheiros
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Se os tamanhos das miniaturas forem diferentes levará mais tempo a processá-las todas as vezes que se mudar entre a aba do editor e do navegador de ficheiros.
PREFERENCES_GIMPPATH;Pasta de instalação do GIMP
-PREFERENCES_GREY;Luminância Yb do dispositivo de saída (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Configurações no menu principal
-PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;Luminância Yb da cena (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;Automático
PREFERENCES_HISTOGRAMPOSITIONLEFT;Histograma no painel esquerdo
-PREFERENCES_HISTOGRAMWORKING;Usar o perfil de trabalho para o histograma principal e o navegador
PREFERENCES_HISTOGRAM_TOOLTIP;Ativado: é usado o perfil de trabalho para renderizar o painel histograma principal e o painel navegador.\nDesativado: é usado o perfil de saída com gama corrigida.
PREFERENCES_HLTHRESHOLD;Limite para altas luzes cortadas
PREFERENCES_ICCDIR;Pasta com os perfis de cores
-PREFERENCES_IMG_RELOAD_NEEDED;Para que estas alterações surtam efeito é necessário recarregar a imagem ou que uma nova imagem seja aberta.
PREFERENCES_IMPROCPARAMS;Perfil de processamento padrão
PREFERENCES_INSPECT_LABEL;Inspecionar
PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Número máximo de imagens em cache
@@ -1160,7 +1135,6 @@ PREFERENCES_MENUGROUPLABEL;Grupo "Etiqueta de cor"
PREFERENCES_MENUGROUPPROFILEOPERATIONS;Grupo "Operações de perfil de processamento"
PREFERENCES_MENUGROUPRANK;Grupo "Classificação"
PREFERENCES_MENUOPTIONS;Agrupar opções no menu de contexto (necessário reiniciar)
-PREFERENCES_METADATA;Metadados
PREFERENCES_MONINTENT;Intenção de renderização padrão
PREFERENCES_MONITOR;Monitor
PREFERENCES_MONPROFILE;Perfil de cor padrão
@@ -1238,9 +1212,7 @@ PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Renderização raw neutra
PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Incorporar JPEG se for no tamanho real, caso contrário usar raw neutro
PREFERENCES_TP_LABEL;Painel de ferramentas:
PREFERENCES_TP_VSCROLLBAR;Ocultar barra de deslocamento vertical
-PREFERENCES_TUNNELMETADATA;Copiar Exif/IPTC/XMP inalterados para o ficheiro de saída
PREFERENCES_USEBUNDLEDPROFILES;Usar perfis incluídos
-PREFERENCES_VIEW;Balanço de brancos do dispositivo de saída (monitor, TV, projetor, visualização, etc.)
PREFERENCES_WORKFLOW;Interface
PROFILEPANEL_COPYPPASTE;Parâmetros a copiar
PROFILEPANEL_GLOBALPROFILES;Perfis incluídos
@@ -1449,8 +1421,6 @@ TP_COLORAPP_SURROUND_DARK;Escuro
TP_COLORAPP_SURROUND_DIM;Sombrio
TP_COLORAPP_SURROUND_EXDARK;Extremamente escuro (camada de corte)
TP_COLORAPP_SURROUND_TOOLTIP;Altera os tons e cores de acordo com as condições de visualização do dispositivo de saída.\n\nMédio: ambiente de luz médio (padrão). A imagem não vai mudar.\n\nSombrio: ambiente sombrio (TV). A imagem ficará ligeiramente escura.\n\nEscuro: ambiente escuro (projetor). A imagem ficará mais escura.\n\nExtremamente escuro: Ambiente extremamente escuro (camada de corte). A imagem ficará muito escura.
-TP_COLORAPP_SURSOURCE;Borda escura
-TP_COLORAPP_SURSOURCE_TOOLTIP;Pode ser usado se a imagem tiver uma borda escura.
TP_COLORAPP_TCMODE_BRIGHTNESS;Brilho
TP_COLORAPP_TCMODE_CHROMA;Croma
TP_COLORAPP_TCMODE_COLORF;Colorido
@@ -1551,7 +1521,6 @@ TP_DEHAZE_SHOW_DEPTH_MAP;Mostrar mapa de profundidade
TP_DEHAZE_STRENGTH;Intensidade
TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Multi-zonas automático
TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Global automático
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Tentar avaliar o ruído de crominância\nTenha cuidado, este cálculo é mediano e é bastante subjetivo!
TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Crominância - Azul-amarelo
TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Curva de crominância
TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Aumentar (multiplicar) o valor de todos os controlos deslizantes de crominância.\nEsta curva permite ajustar a intensidade da redução de ruído cromático em função da cromaticidade, por exemplo, para aumentar a ação em áreas de baixa saturação e diminuí-la nas de alta saturação.
@@ -1569,8 +1538,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Pré-visualização do ruído: M
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Pré-visualização do ruído: Médio= - Alto= -
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Matriz tamanho=%1, Centro: Tx=%2 Ty=%3
TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Crominância - Vermelho-verde
-TP_DIRPYRDENOISE_ENH;Modo avançado
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Aumenta a qualidade da redução do ruído mas aumenta em 20% o tempo de processamento.
TP_DIRPYRDENOISE_LABEL;Redução de ruído
TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Controlo da luminância
TP_DIRPYRDENOISE_LUMINANCE_CURVE;Curva de luminância
@@ -1599,7 +1566,6 @@ TP_DIRPYRDENOISE_MEDIAN_PASSES;Iterações medianas
TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;A aplicação de três iterações de filtro mediano com o tamanho de janela 3×3 muitas vezes dá resultados melhores do que usar uma iteração de filtro mediano com tamanho de janela 7×7.
TP_DIRPYRDENOISE_MEDIAN_TYPE;Tipo de mediano
TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Aplicar um filtro mediano no tamanho da janela desejado. Quanto maior o tamanho da janela, mais tempo demora.\n\n3×3 suave: trata 5 píxeis numa janela de 3×3 píxeis.\n3×3: trata 9 píxeis numa janela de 3×3 píxeis.\n5×5 suave: trata 13 píxeis numa janela de 5×5 píxeis.\n5×5: trata 25 píxeis numa janela de 5×5 píxeis.\n7×7: trata 49 píxeis numa janela de 7×7 píxeis.\n9×9: trata 81 píxeis numa janela de 9×9 píxeis.\n\nÀs vezes é possível obter uma qualidade mais alta executando várias iterações com um tamanho de janela menor do que uma iteração com uma maior.
-TP_DIRPYRDENOISE_SLI;Controlo deslizante
TP_DIRPYRDENOISE_TYPE_3X3;3×3
TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 suave
TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1704,8 +1670,6 @@ TP_ICM_APPLYHUESATMAP;Tabela base
TP_ICM_APPLYHUESATMAP_TOOLTIP;Usa a tabela base DCP incorporada (HueSatMap). Esta configuração só estará disponível se o DCP selecionado tiver um.
TP_ICM_APPLYLOOKTABLE;Tabela de valores
TP_ICM_APPLYLOOKTABLE_TOOLTIP;Usa a tabela de valores (lookup table) DCP incorporada. Esta configuração só estará disponível se o DCP selecionado tiver um.
-TP_ICM_BLENDCMSMATRIX;Misturar as altas luzes do ICC com a matriz
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Ativar para recuperar as altas luzes cortadas ao usar perfis ICC baseados em LUT (Look up Table).
TP_ICM_BPC;Compensação de ponto preto
TP_ICM_DCPILLUMINANT;Iluminante
TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolado
@@ -1831,7 +1795,6 @@ TP_RAWCACORR_AUTOIT_TOOLTIP;Esta funcionalidade está disponível se a opção "
TP_RAWCACORR_AVOIDCOLORSHIFT;Evitar mudança de cor
TP_RAWCACORR_CABLUE;Azul
TP_RAWCACORR_CARED;Vermelho
-TP_RAWCACORR_CASTR;Intensidade
TP_RAWEXPOS_BLACKS;Níveis de preto
TP_RAWEXPOS_BLACK_0;Verde 1 (guia)
TP_RAWEXPOS_BLACK_1;Vermelho
@@ -1890,15 +1853,12 @@ TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equaliza o brilho dos fotogramas para o bri
TP_RAW_PIXELSHIFTGREEN;Verificar o canal verde para movimento
TP_RAW_PIXELSHIFTHOLEFILL;Preencher buracos na máscara de movimento
TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Preenche os buracos na máscara de movimento
-TP_RAW_PIXELSHIFTLMMSE;Usar LMMSE para partes móveis
-TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Usa LMMSE em vez de AMaZE para áreas de movimento.\nÚtil para imagens com ISO alto.
TP_RAW_PIXELSHIFTMEDIAN;Usa mediana para partes móveis
TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Usa a mediana de todos os fotogramas em vez do fotograma selecionado para regiões com movimento.\nRemove objetos que estão em lugares diferentes em todos os fotogramas.\nDá um efeito de movimento em objetos de movimento lento (sobreposição).
TP_RAW_PIXELSHIFTMM_AUTO;Automático
TP_RAW_PIXELSHIFTMM_CUSTOM;Personalizado
TP_RAW_PIXELSHIFTMM_OFF;Desligado
TP_RAW_PIXELSHIFTMOTIONMETHOD;Correção de movimento
-TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 significa que não há deteção de movimento.\n1 - 99 significa que o movimento será detectado de acordo com este valor. Aumentar o valor para aumentar a taxa de deteção.\n100 significa que será usado o fotograma de desmatrização AMaZE.
TP_RAW_PIXELSHIFTNONGREENCROSS;Verifica os canais vermelho/azul para movimento
TP_RAW_PIXELSHIFTSHOWMOTION;Mostra máscara de movimento
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Mostra apenas a máscara de movimento
@@ -1945,7 +1905,6 @@ TP_RETINEX_GAIN;Ganho
TP_RETINEX_GAINOFFS;Ganho e deslocamento (brilho)
TP_RETINEX_GAINTRANSMISSION;Transmissão de ganho
TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplifica ou reduz o mapa de transmissão para alcançar a luminância desejada.\nO eixo do X (vertical) é a transmissão.\nO eixo do Y (horizontal) é o ganho.
-TP_RETINEX_GAIN_TOOLTIP;Atua na imagem restaurada.\n\nIsto é muito diferente das outras configurações. Usado para píxeis pretos ou brancos e para ajudar a equilibrar o histograma.
TP_RETINEX_GAMMA;Gama
TP_RETINEX_GAMMA_FREE;Livre
TP_RETINEX_GAMMA_HIGH;Alta
@@ -2023,10 +1982,8 @@ TP_SAVEDIALOG_OK_TIP;Atalho: Ctrl-Enter
TP_SHADOWSHLIGHTS_HIGHLIGHTS;Altas luzes
TP_SHADOWSHLIGHTS_HLTONALW;Largura tonal das altas luzes
TP_SHADOWSHLIGHTS_LABEL;Sombras/altas luzes
-TP_SHADOWSHLIGHTS_LOCALCONTR;Contraste local
TP_SHADOWSHLIGHTS_RADIUS;Raio
TP_SHADOWSHLIGHTS_SHADOWS;Sombras
-TP_SHADOWSHLIGHTS_SHARPMASK;Máscara de nitidez
TP_SHADOWSHLIGHTS_SHTONALW;Largura tonal das sombras
TP_SHARPENEDGE_AMOUNT;Quantidade
TP_SHARPENEDGE_LABEL;Bordas
diff --git a/rtdata/languages/Portugues (Brasil) b/rtdata/languages/Portugues (Brasil)
index 28b205ddc..3096f62b4 100644
--- a/rtdata/languages/Portugues (Brasil)
+++ b/rtdata/languages/Portugues (Brasil)
@@ -98,7 +98,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Ignorar [raw] LMMSE Etapas de Aprimoramento
EXPORT_BYPASS_SHARPENEDGE;Ignorar Nitidez de Borda
EXPORT_BYPASS_SHARPENING;Ignorar Nitidez
EXPORT_BYPASS_SHARPENMICRO;Ignorar Microcontraste
-EXPORT_BYPASS_SH_HQ;Ignorar Sombras/Realces da Máscara de Nitidez
EXPORT_FASTEXPORTOPTIONS;Opções de Exportação Rápida
EXPORT_INSTRUCTIONS;As opções de exportação rápida fornecem substituições para ignorar tempo e recursos consumidos no desenvolvimento de configurações e na execução do processamento de filas. Este método é recomendado para geração rápida de imagens de baixa resolução, quando a velocidade é prioridade ou quando a saída redimensionada é desejada para uma ou mais imagens sem fazer modificações nos parâmetros de desenvolvimento salvos.
EXPORT_MAXHEIGHT;Altura máxima:
@@ -111,7 +110,6 @@ EXPORT_USE_FAST_PIPELINE_TIP;Use um processamento dedicado pipeline para imagens
EXPORT_USE_NORMAL_PIPELINE;Padrão (ignorar algumas etapas, redimensionar no final)
EXTPROGTARGET_1;raw
EXTPROGTARGET_2;processado em fila
-FILEBROWSER_ADDDELTEMPLATE;Adicionar/Excluir modelos...
FILEBROWSER_APPLYPROFILE;Aplicar
FILEBROWSER_APPLYPROFILE_PARTIAL;Aplicar - parcial
FILEBROWSER_AUTODARKFRAME;Quadro escuro automático
@@ -245,7 +243,6 @@ GIMP_PLUGIN_INFO;Bem-vindo ao plugin RawTherapee do GIMP!\nDepois de terminar de
HISTOGRAM_TOOLTIP_B;Mostrar/Ocultar histograma azul.
HISTOGRAM_TOOLTIP_BAR;Mostrar/ocultar barra do indicador RGB.\nClique com o botão direito do mouse na visualização da imagem para congelar/descongelar.
HISTOGRAM_TOOLTIP_CHRO;Mostrar/Ocultar histograma de cromaticidade.
-HISTOGRAM_TOOLTIP_FULL;Alternar histograma completo (desligado) ou dimensionado (ligado).
HISTOGRAM_TOOLTIP_G;Mostrar/Ocultar histograma verde.
HISTOGRAM_TOOLTIP_L;Mostrar/Ocultar histograma de luminância CIELab.
HISTOGRAM_TOOLTIP_MODE;Alternar entre o modo de escala linear, log-linear e log-log para o histograma.
@@ -781,7 +778,6 @@ HISTORY_NEWSNAPSHOT;Adicionar
HISTORY_NEWSNAPSHOT_TOOLTIP;Atalho: Alt-s
HISTORY_SNAPSHOT;Instantâneo
HISTORY_SNAPSHOTS;Instantâneos
-ICCPROFCREATOR_ADD_PARAM_IN_DESC;Anexar os valores Gama e Declive para a descrição
ICCPROFCREATOR_COPYRIGHT;Direito Autoral:
ICCPROFCREATOR_COPYRIGHT_RESET_TOOLTIP;Restaurar para o direito autoral padrão, concedido a "RawTherapee, CC0"
ICCPROFCREATOR_CUSTOM;Personalizado
@@ -1053,7 +1049,6 @@ PREFERENCES_BEHADDALLHINT;Definir todos os parâmetros para o modo Adicionar<
PREFERENCES_BEHAVIOR;Comportamento
PREFERENCES_BEHSETALL;Tudo para 'Configurar'
PREFERENCES_BEHSETALLHINT;Definir todos os parâmetros para o modo Configurar.\nAjustes de parâmetros no painel de ferramentas de lote serão absoluto, os valores reais serão exibidos.
-PREFERENCES_BLACKBODY;Tungstênio
PREFERENCES_CACHECLEAR;Limpar
PREFERENCES_CACHECLEAR_ALL;Limpar todos os arquivos na cache:
PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Limpar todos os arquivos na cache exceto os perfis para processamento:
@@ -1089,11 +1084,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Formato de chaves
PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Nome
PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;ID da Tag
PREFERENCES_CUSTPROFBUILDPATH;Caminho executável
-PREFERENCES_D50;Configurações no menu principal
-PREFERENCES_D50_OLD;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
PREFERENCES_DARKFRAMEFOUND;Encontrado
PREFERENCES_DARKFRAMESHOTS;disparos
PREFERENCES_DARKFRAMETEMPLATES;modelos
@@ -1116,32 +1106,15 @@ PREFERENCES_FLATFIELDFOUND;Encontrado
PREFERENCES_FLATFIELDSDIR;Diretório de campos planos
PREFERENCES_FLATFIELDSHOTS;disparos
PREFERENCES_FLATFIELDTEMPLATES;modelos
-PREFERENCES_FLUOF2;Fluorescente F2
-PREFERENCES_FLUOF7;Fluorescente F7
-PREFERENCES_FLUOF11;Fluorescente F11
PREFERENCES_FORIMAGE;Para fotos não-raw
PREFERENCES_FORRAW;Para fotos raw
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Mesma altura da miniatura do Diapositivo e do Navegador de Arquivos
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Tamanho de miniatura separado exigirá mais tempo de processamento toda vez que alternar entre a guia do Editor e o Navegador de Arquivos.
PREFERENCES_GIMPPATH;Diretório de instalação do GIMP
-PREFERENCES_GREY;Luminância Yb do dispositivo de saída (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Configurações no menu principal
-PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;Luminância Yb da cena (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;Automático
PREFERENCES_HISTOGRAMPOSITIONLEFT;Histograma no painel esquerdo
-PREFERENCES_HISTOGRAMWORKING;Use o perfil de trabalho para o histograma principal e o Navegador
PREFERENCES_HISTOGRAM_TOOLTIP;Se ativado, o perfil de trabalho é usado para renderizar o histograma principal e o painel Navegador, caso contrário, o perfil de saída corrigido por gama é usado.
PREFERENCES_HLTHRESHOLD;Limite para realces recortados
PREFERENCES_ICCDIR;Diretório contendo perfis de cores
-PREFERENCES_IMG_RELOAD_NEEDED;Essas alterações requerem que a imagem seja recarregada (ou que uma nova imagem seja aberta) para terem efeito.
PREFERENCES_IMPROCPARAMS;Perfil de Processamento Padrão
PREFERENCES_INSPECT_LABEL;Inspecionar
PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Número máximo de imagens em cache
@@ -1160,7 +1133,6 @@ PREFERENCES_MENUGROUPLABEL;Grupo "Etiqueta de cor"
PREFERENCES_MENUGROUPPROFILEOPERATIONS;Grupo "Operações de perfil de processamento"
PREFERENCES_MENUGROUPRANK;Grupo "Classificar"
PREFERENCES_MENUOPTIONS;Opções a Mostrar no Menu de Contexto
-PREFERENCES_METADATA;Metadados
PREFERENCES_MONINTENT;Intenção de renderização padrão
PREFERENCES_MONITOR;Monitor
PREFERENCES_MONPROFILE;Perfil de cor padrão
@@ -1238,9 +1210,7 @@ PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Renderização raw neutra
PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;JPEG incorporado se tamanho completo, raw neutro caso contrário
PREFERENCES_TP_LABEL;Painel de ferramentas:
PREFERENCES_TP_VSCROLLBAR;Ocultar barra de rolagem vertical
-PREFERENCES_TUNNELMETADATA;Copiar Exif/IPTC/XMP inalterado para o arquivo de saída
PREFERENCES_USEBUNDLEDPROFILES;Use perfis agrupados
-PREFERENCES_VIEW;Balanço de branco do dispositivo de saída (monitor, TV, projetor, visualização, etc.)
PREFERENCES_WORKFLOW;Layout
PROFILEPANEL_COPYPPASTE;Parâmetros para copiar
PROFILEPANEL_GLOBALPROFILES;Perfis agrupados
@@ -1325,7 +1295,6 @@ TP_BWMIX_ALGO_LI;Linear
TP_BWMIX_ALGO_SP;Efeitos especiais
TP_BWMIX_ALGO_TOOLTIP;Linear: irá produzir uma reação normal linear.\nEfeitos especiais: produzirá efeitos especiais misturando canais não linearmente.
TP_BWMIX_AUTOCH;Automático
-TP_BWMIX_AUTOCH_TIP;Calcular valores otimizando o Misturador de Canais.
TP_BWMIX_CC_ENABLED;Ajustar cor complementar
TP_BWMIX_CC_TOOLTIP;Ative para permitir o ajuste automático de cores complementares no modo ROYGCBPM.
TP_BWMIX_CHANNEL;Equalizador de Luminância
@@ -1354,7 +1323,6 @@ TP_BWMIX_MET_DESAT;Dessaturação
TP_BWMIX_MET_LUMEQUAL;Equalizador de Luminância
TP_BWMIX_MIXC;Misturador de Canais
TP_BWMIX_NEUTRAL;Restabelecer misturador
-TP_BWMIX_NEUTRAL_TIP;Restaurar todos os valores (Filtro de Cores, Misturador de Canais) para o padrão.
TP_BWMIX_RGBLABEL;R: %1%% G: %2%% B: %3%% Total: %4%%
TP_BWMIX_RGBLABEL_HINT;Fatores finais do RGB que cuidam de todas as opções do misturador.\n"Total" exibe a soma dos valores RGB:\n- sempre 100% no modo relativo\n- mais alto (mais claro) ou mais baixo (mais escuro) que 100% no modo absoluto.
TP_BWMIX_RGB_TOOLTIP;Misture os canais RGB. Use predefinições para orientação.\nPreste atenção aos valores negativos que podem causar artefatos ou comportamento errático.
@@ -1451,8 +1419,6 @@ TP_COLORAPP_SURROUND_DARK;Escuro
TP_COLORAPP_SURROUND_DIM;Sombrio
TP_COLORAPP_SURROUND_EXDARK;Extremamente Escuro (Camada de corte)
TP_COLORAPP_SURROUND_TOOLTIP;Altera tons e cores de acordo com as condições de visualização do dispositivo de saída.\n\nMédia: Ambiente de luz médio (padrão). A imagem não vai mudar.\n\nSombrio: Ambiente sombrio (TV). A imagem ficará ligeiramente escura.\n\nEscuro: Ambiente escuro (projetor). A imagem ficará mais escura.\n\nExtremamente Escuro: Ambiente extremamente escuro (camada de corte). A imagem ficará muito escura.
-TP_COLORAPP_SURSOURCE;Borda escura
-TP_COLORAPP_SURSOURCE_TOOLTIP;Pode ser usado se a imagem tiver uma borda escura.
TP_COLORAPP_TCMODE_BRIGHTNESS;Brilho
TP_COLORAPP_TCMODE_CHROMA;Croma
TP_COLORAPP_TCMODE_COLORF;Colorido
@@ -1551,7 +1517,6 @@ TP_DEHAZE_SHOW_DEPTH_MAP;Mostrar mapa de profundidade
TP_DEHAZE_STRENGTH;Intensidade
TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zonas
TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Global automático
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Tente avaliar o ruído de croma\nTenha cuidado, esse cálculo é mediano e é bastante subjetivo!
TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Crominância - Azul-Amarelo
TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Curva de crominância
TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Aumentar (multiplicar) o valor de todos os controles deslizantes de crominância.\nEsta curva permite ajustar a intensidade da redução de ruído cromático em função da cromaticidade, por exemplo, para aumentar a ação em áreas de baixa saturação e diminuí-la nas de alta saturação.
@@ -1569,8 +1534,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Pré-visualização ruído: Médi
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Pré-visualização ruído: Médio= - Alto= -
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Mosaico tamanho=%1, Centro: Tx=%2 Ty=%3
TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Crominância - Vermelho-Verde
-TP_DIRPYRDENOISE_ENH;Modo avançado
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Aumenta a qualidade da redução de ruído em detrimento de um aumento de 20% no tempo de processamento.
TP_DIRPYRDENOISE_LABEL;Redução de Ruído
TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Controle de luminância
TP_DIRPYRDENOISE_LUMINANCE_CURVE;Curva de luminância
@@ -1599,7 +1562,6 @@ TP_DIRPYRDENOISE_MEDIAN_PASSES;Iterações medianas
TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;A aplicação de três iterações de filtro mediano com tamanho de janela 3×3 frequentemente dá resultados melhores do que usar uma iteração de filtro mediano com tamanho de janela 7×7.
TP_DIRPYRDENOISE_MEDIAN_TYPE;Tipo mediano
TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Aplique um filtro mediano do tamanho da janela. Quanto maior o tamanho da janela, mais tempo demora.\n\n3×3 suave: trata 5 píxeis numa janela de 3×3 píxeis.\n3×3: trata 9 píxeis numa janela de 3×3 píxeis.\n5×5 suave: trata 13 píxeis numa janela de 5×5 píxeis.\n5×5: trata 25 píxeis numa janela de 5×5 píxeis.\n7×7: trata 49 píxeis numa janela de 7×7 píxeis.\n9×9: trata 81 píxeis numa janela de 9×9 píxeis.\n\nÀs vezes é possível obter uma qualidade mais alta executando várias iterações com um tamanho de janela menor do que uma iteração com uma maior.
-TP_DIRPYRDENOISE_SLI;Controle deslizante
TP_DIRPYRDENOISE_TYPE_3X3;3×3
TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 suave
TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1673,10 +1635,6 @@ TP_FLATFIELD_BT_VERTICAL;Vertical
TP_FLATFIELD_CLIPCONTROL;Controle de recorte
TP_FLATFIELD_CLIPCONTROL_TOOLTIP;O controle de recorte evita realces recortados provocados pela aplicação do campo plano. Se já houver realces recortados antes da aplicação do campo plano, o controle de recorte pode levar à conversão de cores.
TP_FLATFIELD_LABEL;Campo Plano
-TP_GAMMA_CURV;Gama
-TP_GAMMA_FREE;Gama livre
-TP_GAMMA_OUTPUT;Gama de saída
-TP_GAMMA_SLOP;Declive (linear)
TP_GENERAL_11SCALE_TOOLTIP;Os efeitos dessa ferramenta só são visíveis ou são precisos numa escala prévia de 1:1.
TP_GRADIENT_CENTER;Centro
TP_GRADIENT_CENTER_X;Centro X
@@ -1708,8 +1666,6 @@ TP_ICM_APPLYHUESATMAP;Tabela básica
TP_ICM_APPLYHUESATMAP_TOOLTIP;Empregue a tabela básica DCP incorporada (MatizSatMap). A configuração só estará disponível se o DCP estiver selecionado como um.
TP_ICM_APPLYLOOKTABLE;Tabela de aparência
TP_ICM_APPLYLOOKTABLE_TOOLTIP;Empregue a tabela de aparência DCP incorporada. A configuração só estará disponível se o DCP estiver selecionado como um.
-TP_ICM_BLENDCMSMATRIX;Misture os realces do ICC com a matriz
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Ativar para recuperar realces recortados ao usar perfis ICC baseados em LUT.
TP_ICM_BPC;Compensação de Ponto Preto
TP_ICM_DCPILLUMINANT;Iluminante
TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolado
@@ -1833,7 +1789,6 @@ TP_RAWCACORR_AUTOIT;Interações
TP_RAWCACORR_AVOIDCOLORSHIFT;Evitar mudança de cor
TP_RAWCACORR_CABLUE;Azul
TP_RAWCACORR_CARED;Vermelho
-TP_RAWCACORR_CASTR;Intensidade
TP_RAWEXPOS_BLACKS;Níveis de Preto
TP_RAWEXPOS_BLACK_0;Verde 1 (guia)
TP_RAWEXPOS_BLACK_1;Vermelho
@@ -1891,15 +1846,12 @@ TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equaliza o brilho dos quadros para o brilho
TP_RAW_PIXELSHIFTGREEN;Verifica o canal verde para movimento
TP_RAW_PIXELSHIFTHOLEFILL;Preenche buracos na máscara de movimento
TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Preenche buracos na máscara de movimento
-TP_RAW_PIXELSHIFTLMMSE;Usa LMMSE para partes móveis
-TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Usa LMMSE em vez de AMaZE para áreas de movimento.\nÚtil para imagens com ISO alto.
TP_RAW_PIXELSHIFTMEDIAN;Usa mediana para partes móveis
TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use a mediana de todos os quadros em vez do quadro selecionado para regiões com movimento.\nRemove objetos que estão em lugares diferentes em todos os quadros.\nDá efeito de movimento em objetos em movimento lento (sobreposição).
TP_RAW_PIXELSHIFTMM_AUTO;Automático
TP_RAW_PIXELSHIFTMM_CUSTOM;Personalizado
TP_RAW_PIXELSHIFTMM_OFF;Desligado
TP_RAW_PIXELSHIFTMOTIONMETHOD;Correção de Movimento
-TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 não há detecção de movimento.\n1 - 99 o movimento será detectado de acordo com este valor. Aumentar o valor para aumentar a taxa de detecção.\n100 o quadro demosaico AMaZE será usado.
TP_RAW_PIXELSHIFTNONGREENCROSS;Checa os canais vermelho/azul para movimento
TP_RAW_PIXELSHIFTSHOWMOTION;Mostra máscara de movimento
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Mostra somente máscara de movimento
@@ -1945,7 +1897,6 @@ TP_RETINEX_FREEGAMMA;Gama livre
TP_RETINEX_GAIN;Ganho
TP_RETINEX_GAINOFFS;Ganho e Compensação (brilho)
TP_RETINEX_GAINTRANSMISSION;Transmissão de ganho
-TP_RETINEX_GAIN_TOOLTIP;Atua na imagem restaurada.\n\nIsso é muito diferente das outras configurações. Usado para píxeis pretos ou brancos e para ajudar a equilibrar o histograma.
TP_RETINEX_GAMMA;Gama
TP_RETINEX_GAMMA_FREE;Livre
TP_RETINEX_GAMMA_HIGH;Alto
@@ -2023,10 +1974,8 @@ TP_SAVEDIALOG_OK_TIP;Atalho: Ctrl-Enter
TP_SHADOWSHLIGHTS_HIGHLIGHTS;Realces
TP_SHADOWSHLIGHTS_HLTONALW;Largura tonal dos realces
TP_SHADOWSHLIGHTS_LABEL;Sombras/Realces
-TP_SHADOWSHLIGHTS_LOCALCONTR;Contraste local
TP_SHADOWSHLIGHTS_RADIUS;Raio
TP_SHADOWSHLIGHTS_SHADOWS;Sombras
-TP_SHADOWSHLIGHTS_SHARPMASK;Máscara de nitidez
TP_SHADOWSHLIGHTS_SHTONALW;Largura tonal das sombras
TP_SHARPENEDGE_AMOUNT;Quantidade
TP_SHARPENEDGE_LABEL;Bordas
diff --git a/rtdata/languages/Russian b/rtdata/languages/Russian
index 6868972ab..70d700afb 100644
--- a/rtdata/languages/Russian
+++ b/rtdata/languages/Russian
@@ -97,7 +97,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Пропустить [raw] шаги LMMSE у
EXPORT_BYPASS_SHARPENEDGE;Пропустить контурное повышение резкости
EXPORT_BYPASS_SHARPENING;Пропустить повышение резкости
EXPORT_BYPASS_SHARPENMICRO;Пропустить микроконтраст
-EXPORT_BYPASS_SH_HQ;Пропустить настройки теней/пересветов
EXPORT_FASTEXPORTOPTIONS;Настройки быстрого экспорта
EXPORT_INSTRUCTIONS;Настройки быстрого экспорта помогают экономить время и ресурсы, затрачиваемые на установку настроек обработки и запускать очередь обработки, используя вместо этого настройки быстрого экспорта. Этот метод рекомендуется для быстрого создания изображений с низким разрешением, когда скорость обработки в приоритете или когда нужно отмасштабировать одно или несколько изображений без внесения изменений в их сохранённые параметры обработки.
EXPORT_MAXHEIGHT;Максимальная высота:
@@ -106,7 +105,6 @@ EXPORT_PUTTOQUEUEFAST; Поставить в очередь для быстро
EXPORT_RAW_DMETHOD;Метод демозаика
EXTPROGTARGET_1;raw
EXTPROGTARGET_2;в очереди обработки
-FILEBROWSER_ADDDELTEMPLATE;Добавить/удалить шаблоны...
FILEBROWSER_APPLYPROFILE;Применить
FILEBROWSER_APPLYPROFILE_PARTIAL;Применить - частично
FILEBROWSER_AUTODARKFRAME;Автоматический темновой кадр
@@ -234,7 +232,6 @@ GENERAL_WARNING;Внимание
HISTOGRAM_TOOLTIP_B;Показать/скрыть синий канал гистограммы
HISTOGRAM_TOOLTIP_BAR;Показать/скрыть панель отображения RGB\nНажмите правую кнопку мыши на предпросмотре изображения, чтобы заблокировать/разблокировать его
HISTOGRAM_TOOLTIP_CHRO;Показать/скрыть хроматическую гистограмму
-HISTOGRAM_TOOLTIP_FULL;Переключить полную (выкл) или отмасштабированную (вкл) гистограмму
HISTOGRAM_TOOLTIP_G;Показать/скрыть зелёный канал гистограммы
HISTOGRAM_TOOLTIP_L;Показать/скрыть CIELAB гистограмму
HISTOGRAM_TOOLTIP_R;Показать/скрыть красный канал гистограммы
@@ -735,7 +732,6 @@ PREFERENCES_BEHADDALLHINT;Выставить все параметры в реж
PREFERENCES_BEHAVIOR;Поведение
PREFERENCES_BEHSETALL;Всё в "Установить"
PREFERENCES_BEHSETALLHINT;Выставить все параметры в режим Установить.\nНастройки параметров в панели пакетной обработки будут абсолютными, будут показаны используемые значения
-PREFERENCES_BLACKBODY;Лампа накаливания
PREFERENCES_CACHECLEAR;Очистить
PREFERENCES_CACHEMAXENTRIES;Максимальное число элементов в кэше
PREFERENCES_CACHEOPTS;Параметры кэширования
@@ -758,11 +754,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Формат ключей
PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Имя
PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
PREFERENCES_CUSTPROFBUILDPATH;Путь к исполняемому файлу
-PREFERENCES_D50;5000K
-PREFERENCES_D50_OLD;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
PREFERENCES_DARKFRAMEFOUND;Найдено
PREFERENCES_DARKFRAMESHOTS;снимков
PREFERENCES_DARKFRAMETEMPLATES;шаблонов
@@ -783,20 +774,9 @@ PREFERENCES_FLATFIELDFOUND;Найдено
PREFERENCES_FLATFIELDSDIR;Каталог файлов плоских полей
PREFERENCES_FLATFIELDSHOTS;снимков
PREFERENCES_FLATFIELDTEMPLATES;шаблонов
-PREFERENCES_FLUOF2;Лампа дневного света F2
-PREFERENCES_FLUOF7;Лампа дневного света F7
-PREFERENCES_FLUOF11;Лампа дневного света F11
PREFERENCES_FORIMAGE;Для изображений
PREFERENCES_FORRAW;Для Raw файлов
PREFERENCES_GIMPPATH;Каталог установки GIMP
-PREFERENCES_GREY;Яркость (Yb) устройства вывода (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
PREFERENCES_HISTOGRAMPOSITIONLEFT;Гистограмма на левой панели
PREFERENCES_HLTHRESHOLD;Порог срабатывания пересветов
PREFERENCES_ICCDIR;Каталог ICC профилей
@@ -816,7 +796,6 @@ PREFERENCES_MENUGROUPLABEL;Группа "Цветовая пометка"
PREFERENCES_MENUGROUPPROFILEOPERATIONS;Группа "Действия с профилем обработки"
PREFERENCES_MENUGROUPRANK;Группа "Рейтинг"
PREFERENCES_MENUOPTIONS;Настройки контекстного меню
-PREFERENCES_METADATA;Метаданные
PREFERENCES_MONITOR;Монитор
PREFERENCES_MULTITAB;Много вкладок
PREFERENCES_MULTITABDUALMON;Много вкладок, на втором мониторе (если возможно)
@@ -876,9 +855,7 @@ PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Нейтрально обработанны
PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Встроенный полноразмерный jpeg, иначе нейтральный raw
PREFERENCES_TP_LABEL;Панель инструментов:
PREFERENCES_TP_VSCROLLBAR;Спрятать вертикальную полосу прокрутки
-PREFERENCES_TUNNELMETADATA;Копировать данные Exif/IPTC/XMP неизменённо
PREFERENCES_USEBUNDLEDPROFILES;Использовать предустановленный профиль
-PREFERENCES_VIEW;ББ устройства вывода (монитор, проектор и т.д.)
PREFERENCES_WORKFLOW;Стиль работы
PROFILEPANEL_COPYPPASTE;Параметры для копирования
PROFILEPANEL_GLOBALPROFILES;Предустановленные профили
@@ -921,7 +898,6 @@ SAVEDLG_AUTOSUFFIX;Автоматически добавлять суффикс
SAVEDLG_FILEFORMAT;Формат файла
SAVEDLG_FORCEFORMATOPTS;Принудительно установить настройки сохранения
SAVEDLG_JPEGQUAL;Качество JPEG
-SAVEDLG_PNGCOMPR;Сжатие PNG
SAVEDLG_PUTTOQUEUE;Поместить в очередь на обработку
SAVEDLG_PUTTOQUEUEHEAD;Поместить в начало очереди на обработку
SAVEDLG_PUTTOQUEUETAIL;Поместить в конец очереди на обработку
@@ -1084,8 +1060,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Цветность
TP_DIRPYRDENOISE_CHROMINANCE_METHOD;Метод
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW;Превью
TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Цветность: красный-зелёный
-TP_DIRPYRDENOISE_ENH;Улучшенный режим
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Улучшает качество шумоподавления путём увеличения времени обработки на 20%.
TP_DIRPYRDENOISE_LABEL;Подавление шумов
TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Контроль яркости
TP_DIRPYRDENOISE_LUMINANCE_CURVE;Кривая яркости
@@ -1094,7 +1068,6 @@ TP_DIRPYRDENOISE_LUMINANCE_FRAME;Яркость
TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Яркость
TP_DIRPYRDENOISE_MAIN_COLORSPACE;Цветовое пространство
TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;L*a*b*
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_LABEL;Подавление шума
TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;Для raw-изображений можно использовать как режим RGB так и L*a*b*.\n\nДля не-raw будет использован L*a*b* режим вне зависимости от выбора.
TP_DIRPYRDENOISE_MAIN_GAMMA;Гамма
@@ -1105,7 +1078,6 @@ TP_DIRPYRDENOISE_MAIN_MODE_CONSERVATIVE;Осторожный
TP_DIRPYRDENOISE_MAIN_MODE_TOOLTIP;"Осторожный" сохраняет низкочастотные структуры цветности, в то время как "агрессивный" уничтожает их.
TP_DIRPYRDENOISE_MEDIAN_METHOD_LAB;L*a*b*
TP_DIRPYRDENOISE_MEDIAN_METHOD_RGB;RGB
-TP_DIRPYRDENOISE_SLI;Ползунок
TP_DIRPYRDENOISE_TYPE_3X3;3×3
TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 мягкий
TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1166,10 +1138,6 @@ TP_FLATFIELD_BT_HORIZONTAL;Горизонтальная
TP_FLATFIELD_BT_VERTHORIZ;Вертикальная + Горизонтальная
TP_FLATFIELD_BT_VERTICAL;Вертикальная
TP_FLATFIELD_LABEL;Плоское поле
-TP_GAMMA_CURV;гамма
-TP_GAMMA_FREE;Свободная гамма
-TP_GAMMA_OUTPUT;Выходная гамма
-TP_GAMMA_SLOP;наклонная (линейная)
TP_GENERAL_11SCALE_TOOLTIP;Эффект от применения этого инструмента или одного из его компонентов будет виден лишь при просмотре в масштабе 1:1.
TP_GRADIENT_CENTER;Центр
TP_GRADIENT_CENTER_X;X-координата
@@ -1195,8 +1163,6 @@ TP_HSVEQUALIZER_HUE;H
TP_HSVEQUALIZER_LABEL;Эквалайзер HSV
TP_HSVEQUALIZER_SAT;S
TP_HSVEQUALIZER_VAL;V
-TP_ICM_BLENDCMSMATRIX;Смешивать засветы с матрицей
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Включить восстановление пересветов во время использования профилей ICC на основе LUT
TP_ICM_BPC;Компенсация точки чёрного
TP_ICM_DCPILLUMINANT;Источник света
TP_ICM_DCPILLUMINANT_INTERPOLATED;Интерполированный
@@ -1302,7 +1268,6 @@ TP_RAWCACORR_AUTOIT;Подходов
TP_RAWCACORR_AVOIDCOLORSHIFT;Избегать сдвига цветов
TP_RAWCACORR_CABLUE;Синий
TP_RAWCACORR_CARED;Красный
-TP_RAWCACORR_CASTR;Сила
TP_RAWEXPOS_BLACKS;Уровни черного
TP_RAWEXPOS_BLACK_0;Зелёный 1 (ведущий)
TP_RAWEXPOS_BLACK_1;Красный
@@ -1375,10 +1340,8 @@ TP_SAVEDIALOG_OK_TIP;Горячая клавиша Ctrl-Enter
TP_SHADOWSHLIGHTS_HIGHLIGHTS;Света
TP_SHADOWSHLIGHTS_HLTONALW;Уровень
TP_SHADOWSHLIGHTS_LABEL;Тени/света
-TP_SHADOWSHLIGHTS_LOCALCONTR;Локальный контраст
TP_SHADOWSHLIGHTS_RADIUS;Радиус
TP_SHADOWSHLIGHTS_SHADOWS;Тени
-TP_SHADOWSHLIGHTS_SHARPMASK;Маска резкости
TP_SHADOWSHLIGHTS_SHTONALW;Уровень
TP_SHARPENEDGE_AMOUNT;Величина
TP_SHARPENEDGE_LABEL;Края
@@ -1842,13 +1805,7 @@ ZOOMPANEL_ZOOMOUT;Отдалить\nГорячая клавиша: -
!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
!PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
!PREFERENCES_MAXRECENTFOLDERS;Maximum number of recent folders
!PREFERENCES_MONINTENT;Default rendering intent
@@ -1916,8 +1873,6 @@ ZOOMPANEL_ZOOMOUT;Отдалить\nГорячая клавиша: -
!TP_COLORAPP_SURROUND_DIM;Dim
!TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
!TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\nAverage: Average light environment (standard). The image will not change.\n\nDim: Dim environment (TV). The image will become slighty dark.\n\nDark: Dark environment (projector). The image will become more dark.\n\nExtremly Dark: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
!TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
!TP_COLORAPP_TCMODE_CHROMA;Chroma
!TP_COLORAPP_TCMODE_COLORF;Colorfulness
@@ -1990,7 +1945,6 @@ ZOOMPANEL_ZOOMOUT;Отдалить\nГорячая клавиша: -
!TP_COLORTONING_TWOSTD;Standard chroma
!TP_CROP_PPI;PPI
!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
!TP_DIRPYRDENOISE_CHROMINANCE_METHODADVANCED_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
!TP_DIRPYRDENOISE_CHROMINANCE_METHOD_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nAutomatic multi-zones\nNo preview - works only during saving, but using the "Preview" method by matching the tile size and center to the preview size and center you can get an idea of the expected results.\nThe image is divided into tiles (about 10 to 70 depending on image size) and each tile receives its own chrominance noise reduction settings.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
@@ -2078,15 +2032,12 @@ ZOOMPANEL_ZOOMOUT;Отдалить\nГорячая клавиша: -
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
!TP_RAW_PIXELSHIFTMM_OFF;Off
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -2111,7 +2062,6 @@ ZOOMPANEL_ZOOMOUT;Отдалить\nГорячая клавиша: -
!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
!TP_RETINEX_GAINTRANSMISSION;Gain transmission
!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
!TP_RETINEX_GAMMA;Gamma
!TP_RETINEX_GAMMA_FREE;Free
!TP_RETINEX_GAMMA_HIGH;High
diff --git a/rtdata/languages/Serbian (Cyrilic Characters) b/rtdata/languages/Serbian (Cyrilic Characters)
index 3d339d384..b11a54e17 100644
--- a/rtdata/languages/Serbian (Cyrilic Characters)
+++ b/rtdata/languages/Serbian (Cyrilic Characters)
@@ -68,7 +68,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Занемари [raw] ЛММСЕ корак
EXPORT_BYPASS_SHARPENEDGE;Занемари оштрење ивице
EXPORT_BYPASS_SHARPENING;Занемари оштрење
EXPORT_BYPASS_SHARPENMICRO;Занемари микроконтраст
-EXPORT_BYPASS_SH_HQ;Занемари оштру маску за Сенке/Светло
EXPORT_FASTEXPORTOPTIONS;Опције за брз извоз
EXPORT_INSTRUCTIONS;Брз извоз омогућава да заобиђете неке од захтевних и споријих процеса приликом развијања слика и да закажете фотографије за брзо развијање. Овј метод је добар за брзо развијање слика у мањој резолуцији, када вам је битно да фотографије добијете што пре или када желите примените задовољавајуће параметре за развијање већег броја фотографија одједном без измене њихових профила.
EXPORT_MAXHEIGHT;Највећа висина:
@@ -77,7 +76,6 @@ EXPORT_PUTTOQUEUEFAST; Закажи за брз извоз
EXPORT_RAW_DMETHOD;Начин расклапања мозаика
EXTPROGTARGET_1;raw
EXTPROGTARGET_2;заказано-развијено
-FILEBROWSER_ADDDELTEMPLATE;Додај/уклони шаблоне...
FILEBROWSER_APPLYPROFILE;Примени профил
FILEBROWSER_APPLYPROFILE_PARTIAL;Примени профил (половично)
FILEBROWSER_AUTODARKFRAME;Сам одреди тамни кадар
@@ -178,7 +176,6 @@ GENERAL_WARNING;Упозорење
HISTOGRAM_TOOLTIP_B;Приказује плави хистограм
HISTOGRAM_TOOLTIP_BAR;Приказује/сакрива РГБ индикатор. Кликните десни тастер миша на умањени приказ да замрзнете
HISTOGRAM_TOOLTIP_CHRO;Прикажи/сакриј хистограм хроминансе.
-HISTOGRAM_TOOLTIP_FULL;Укључује приказ потпуног или хистограма у размери.
HISTOGRAM_TOOLTIP_G;Приказује зелени хистограм
HISTOGRAM_TOOLTIP_L;Приказује ЦиеЛаб хитограм
HISTOGRAM_TOOLTIP_R;Приказује црвени хистограм
@@ -592,7 +589,6 @@ PREFERENCES_BEHADDALLHINT;Поставља све параметре у режи
PREFERENCES_BEHAVIOR;Понашање
PREFERENCES_BEHSETALL;Све у „Постави“
PREFERENCES_BEHSETALLHINT;Поставља све параметре у режим Постави.\nЊихово подешавање помоћу алата из панела за заказано ће бити апсолутне вредности као што су и изабране.
-PREFERENCES_BLACKBODY;Обична сијалица
PREFERENCES_CACHEMAXENTRIES;Највећи број мест у остави
PREFERENCES_CACHEOPTS;Подешавање оставе
PREFERENCES_CACHETHUMBHEIGHT;Највећа висина приказа
@@ -603,10 +599,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Кључни формати
PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Назив
PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;БрОзнаке
PREFERENCES_CUSTPROFBUILDPATH;Извршна путања
-PREFERENCES_D50;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
PREFERENCES_DARKFRAMEFOUND;Нађен
PREFERENCES_DARKFRAMESHOTS;снимака
PREFERENCES_DARKFRAMETEMPLATES;шаблони
@@ -626,20 +618,9 @@ PREFERENCES_FLATFIELDFOUND;Нађено
PREFERENCES_FLATFIELDSDIR;Директоријум за равна поља
PREFERENCES_FLATFIELDSHOTS;снимака
PREFERENCES_FLATFIELDTEMPLATES;шаблони
-PREFERENCES_FLUOF2;Флоресцентна F2
-PREFERENCES_FLUOF7;Флоресцентна F7
-PREFERENCES_FLUOF11;Флоресцентна F11
PREFERENCES_FORIMAGE;За датотеке са сликама
PREFERENCES_FORRAW;За RAW датотеке
PREFERENCES_GIMPPATH;Директоријум са инсталираним Гимпом
-PREFERENCES_GREY;Yb луминанса излазног уређаја (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
PREFERENCES_HISTOGRAMPOSITIONLEFT;Хистограм у левој површи
PREFERENCES_HLTHRESHOLD;Праг за одсечене светле делове
PREFERENCES_ICCDIR;ИЦЦ директоријум
@@ -656,7 +637,6 @@ PREFERENCES_MENUGROUPLABEL;Групиши обележавање
PREFERENCES_MENUGROUPPROFILEOPERATIONS;Групиши радње са профилима
PREFERENCES_MENUGROUPRANK;Групиши оцењивање
PREFERENCES_MENUOPTIONS;Опције менија
-PREFERENCES_METADATA;Метаподаци
PREFERENCES_MULTITAB;Режим у више листова
PREFERENCES_MULTITABDUALMON;Режим у више листова, на другом монитору
PREFERENCES_OUTDIR;Излазни директоријум
@@ -699,9 +679,7 @@ PREFERENCES_TAB_IMPROC;Обрада сликe
PREFERENCES_TAB_SOUND;Звуци
PREFERENCES_TP_LABEL;Површ алата:
PREFERENCES_TP_VSCROLLBAR;Сакриј клизаче у области са алаткама
-PREFERENCES_TUNNELMETADATA;Копирај неизмењене IPTC/XMP (када је слика означена другим програмом)
PREFERENCES_USEBUNDLEDPROFILES;Користи профиле који долазе уз програм
-PREFERENCES_VIEW;Баланс беле излазног уређаја (монитор, ТВ, пројакетор и др.)
PREFERENCES_WORKFLOW;Ток обраде
PROFILEPANEL_COPYPPASTE;Параметри за копирање
PROFILEPANEL_GLOBALPROFILES;Профили из програма
@@ -735,14 +713,12 @@ PROGRESSBAR_SAVEPNG;Чувам PNG датотеку...
PROGRESSBAR_SAVETIFF;Чувам TIFF датотеку...
PROGRESSBAR_SNAPSHOT_ADDED;Додат је снимак
PROGRESSDLG_PROFILECHANGEDINBROWSER;Профил измењен у разгледачу
-P_GAMMA_CURV;гама
QINFO_ISO;ИСО
QINFO_NOEXIF;Нису доступни Exif подаци.
SAVEDLG_AUTOSUFFIX;Сам додај суфикс уколико датотека већ постоји
SAVEDLG_FILEFORMAT;Формат датотеке
SAVEDLG_FORCEFORMATOPTS;Приморај могућности за чување
SAVEDLG_JPEGQUAL;JPEG квалитет
-SAVEDLG_PNGCOMPR;PNG паковање
SAVEDLG_PUTTOQUEUE;Заказује слику за обраду
SAVEDLG_PUTTOQUEUEHEAD;Премешта слику на почетак заказаних
SAVEDLG_PUTTOQUEUETAIL;Премешта слику на крај заказаних
@@ -879,8 +855,6 @@ TP_COLORAPP_SURROUND_DARK;Тамно
TP_COLORAPP_SURROUND_DIM;Затамњено
TP_COLORAPP_SURROUND_EXDARK;Јако тамно
TP_COLORAPP_SURROUND_TOOLTIP;Мења тонове и боје како би се прилагодило условима уређаја за приказ.\n\nПросечно: Просечно осветљено окружење (уобичајено). Слика неће бити измењена.\n\nЗатамњено: Затамњено окружење (ТВ). Слика ће постати за нијансу тамнија.\n\nТамно: Тамно окружење (пројектор). Слика ће постати још више тамна.\n\nЈако тамно: Екстрамно тамно окружење (cutsheet). Слика ће постати изузетно тамна.
-TP_COLORAPP_SURSOURCE;Тамно окружење
-TP_COLORAPP_SURSOURCE_TOOLTIP;Може да се користи уколико слика има тамне ивице.
TP_COLORAPP_TCMODE_BRIGHTNESS;Освтљеност
TP_COLORAPP_TCMODE_CHROMA;Хрома
TP_COLORAPP_TCMODE_COLORF;Живост боја
@@ -915,12 +889,9 @@ TP_DEFRINGE_THRESHOLD;Праг
TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Хроминанса: Плава-Жута
TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Боја
TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Хроминанса - црвена-зелена
-TP_DIRPYRDENOISE_ENH;Побољшани режим
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Повећава квалитет уклањања шума на уштрб око 20% времена за обраду.
TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Детаљи луминансе
TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Луминанса
TP_DIRPYRDENOISE_MAIN_COLORSPACE;Начин
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_LABEL;Дирекционо пирамидно уклањање шума
TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;РГБ
TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;За рав слике можете користити РГБ или Лаб режиме.\n\nЗа остале слике се користи Лаб, без обзира на избор.
TP_DIRPYRDENOISE_MAIN_GAMMA;Гама
@@ -970,10 +941,6 @@ TP_FLATFIELD_BT_HORIZONTAL;Хоризонтално
TP_FLATFIELD_BT_VERTHORIZ;Хориз. и вертик.
TP_FLATFIELD_BT_VERTICAL;Вертикално
TP_FLATFIELD_LABEL;Равно поље
-TP_GAMMA_CURV;Гама
-TP_GAMMA_FREE;Гама слобода
-TP_GAMMA_OUTPUT;Излазна гама
-TP_GAMMA_SLOP;нагиб (линеарни)
TP_GENERAL_11SCALE_TOOLTIP;Ефект овог алата или његових опција се види само у размери 1:1.
TP_GRADIENT_CENTER;Центар
TP_GRADIENT_CENTER_X;Центар X
@@ -999,8 +966,6 @@ TP_HSVEQUALIZER_HUE;Нијанса
TP_HSVEQUALIZER_LABEL;Уједначење ХСВ канала
TP_HSVEQUALIZER_SAT;Засићеност
TP_HSVEQUALIZER_VAL;Вредност
-TP_ICM_BLENDCMSMATRIX;Утопи светле делове у матрицу
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Омогућите како би повратили преосветљене делове уколико користите LUT ICC профиле.
TP_ICM_DCPILLUMINANT;Илуминантно
TP_ICM_DCPILLUMINANT_INTERPOLATED;Интерполирано
TP_ICM_INPUTCAMERA;Подразумевано из апарата
@@ -1126,10 +1091,8 @@ TP_SAVEDIALOG_OK_TIP;Пречица: Ctrl-Enter
TP_SHADOWSHLIGHTS_HIGHLIGHTS;Светло
TP_SHADOWSHLIGHTS_HLTONALW;Ширина тонова
TP_SHADOWSHLIGHTS_LABEL;Сенке/Светло
-TP_SHADOWSHLIGHTS_LOCALCONTR;Локални контраст
TP_SHADOWSHLIGHTS_RADIUS;Полупречник
TP_SHADOWSHLIGHTS_SHADOWS;Сенке
-TP_SHADOWSHLIGHTS_SHARPMASK;Оштра маска
TP_SHADOWSHLIGHTS_SHTONALW;Ширина тонова
TP_SHARPENEDGE_AMOUNT;Количина
TP_SHARPENEDGE_LABEL;Ивице
@@ -1726,19 +1689,12 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике -
!PREFERENCES_CURVEBBOXPOS_BELOW;Below
!PREFERENCES_CURVEBBOXPOS_LEFT;Left
!PREFERENCES_CURVEBBOXPOS_RIGHT;Right
-!PREFERENCES_D50_OLD;5000K
!PREFERENCES_DIRECTORIES;Directories
!PREFERENCES_EDITORCMDLINE;Custom command line
!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
!PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
!PREFERENCES_INSPECT_LABEL;Inspect
!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
@@ -1888,7 +1844,6 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике -
!TP_DEHAZE_STRENGTH;Strength
!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
!TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominance
@@ -1924,7 +1879,6 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике -
!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
!TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
!TP_DIRPYRDENOISE_TYPE_3X3;3×3
!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
!TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -2006,7 +1960,6 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике -
!TP_RAWCACORR_AUTOIT;Iterations
!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CASTR;Strength
!TP_RAWEXPOS_BLACK_0;Green 1 (lead)
!TP_RAWEXPOS_BLACK_1;Red
!TP_RAWEXPOS_BLACK_2;Blue
@@ -2052,15 +2005,12 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике -
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
!TP_RAW_PIXELSHIFTMM_OFF;Off
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -2095,7 +2045,6 @@ ZOOMPANEL_ZOOMOUT;Умањује приказ слике -
!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
!TP_RETINEX_GAINTRANSMISSION;Gain transmission
!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
!TP_RETINEX_GAMMA;Gamma
!TP_RETINEX_GAMMA_FREE;Free
!TP_RETINEX_GAMMA_HIGH;High
diff --git a/rtdata/languages/Serbian (Latin Characters) b/rtdata/languages/Serbian (Latin Characters)
deleted file mode 100644
index e00d7bc97..000000000
--- a/rtdata/languages/Serbian (Latin Characters)
+++ /dev/null
@@ -1,2337 +0,0 @@
-#01 2010-11-16 gpopac
-
-ABOUT_TAB_BUILD;Izdanje
-ABOUT_TAB_CREDITS;Zasluge
-ABOUT_TAB_LICENSE;Licenca
-ABOUT_TAB_RELEASENOTES;Beleške o izdanju
-ABOUT_TAB_SPLASH;Uvod
-BATCHQUEUE_AUTOSTART;Sam započni
-BATCHQUEUE_AUTOSTARTHINT;Pokreće obradu fotografija kada ih zakažete
-BATCHQUEUE_DESTFILENAME;Putanja i ime datoteke
-BATCH_PROCESSING;obrada
-CURVEEDITOR_CURVE;Krivulja
-CURVEEDITOR_CURVES;Krivulje
-CURVEEDITOR_CUSTOM;Proizvoljno
-CURVEEDITOR_DARKS;Tamno
-CURVEEDITOR_HIGHLIGHTS;Presvetlo
-CURVEEDITOR_LIGHTS;Svetlo
-CURVEEDITOR_LINEAR;Linearno
-CURVEEDITOR_LOADDLGLABEL;Učitaj krivu...
-CURVEEDITOR_MINMAXCPOINTS;Min/maks. kontrolne tačke
-CURVEEDITOR_NURBS;Sa kavezom
-CURVEEDITOR_PARAMETRIC;Parametarski
-CURVEEDITOR_SAVEDLGLABEL;Sačuvaj krivu...
-CURVEEDITOR_SHADOWS;Senke
-CURVEEDITOR_TOOLTIPCOPY;Umnožava trenutnu krivulju u ostavu
-CURVEEDITOR_TOOLTIPLINEAR;Vraća krivu na linearnu
-CURVEEDITOR_TOOLTIPLOAD;Učitava krivulju iz datoteke
-CURVEEDITOR_TOOLTIPPASTE;Ubacuje krivulju iz ostave
-CURVEEDITOR_TOOLTIPSAVE;Čuva trenutnu krivulju
-CURVEEDITOR_TYPE;Vrsta:
-EDITWINDOW_TITLE;Uređivanje slike
-EXIFFILTER_APERTURE;Otvor blende
-EXIFFILTER_CAMERA;Foto aparat
-EXIFFILTER_EXPOSURECOMPENSATION;Kompenzacija ekspozicije (EV)
-EXIFFILTER_FILETYPE;Vrsta datoteke
-EXIFFILTER_FOCALLEN;Žižna daljina
-EXIFFILTER_ISO;ISO
-EXIFFILTER_LENS;Objektiv
-EXIFFILTER_METADATAFILTER;Filtriraj metapodatke
-EXIFFILTER_SHUTTER;Ekspozicija
-EXIFPANEL_ADDEDIT;Dodaj/Izmeni
-EXIFPANEL_ADDEDITHINT;Dodaje novu oznaku ili uređuje postojeću
-EXIFPANEL_ADDTAGDLG_ENTERVALUE;Unesite vrednost
-EXIFPANEL_ADDTAGDLG_SELECTTAG;Izaberite oznaku
-EXIFPANEL_ADDTAGDLG_TITLE;Dodaj/Izmeni oznaku
-EXIFPANEL_KEEP;Zadrži
-EXIFPANEL_KEEPHINT;Zadržava izabrane oznake pri upisu izlazne datoteke
-EXIFPANEL_REMOVE;Ukloni
-EXIFPANEL_REMOVEHINT;Uklanja izabrane oznake pri upisu izlazne datoteke
-EXIFPANEL_RESET;Vrati
-EXIFPANEL_RESETALL;Vrati sve
-EXIFPANEL_RESETALLHINT;Vraća sve oznake na početne vrednosti
-EXIFPANEL_RESETHINT;Vraća izabranu oznaku na početnu vrednosti
-EXIFPANEL_SUBDIRECTORY;Poddirektorijum
-EXPORT_BYPASS_ALL;Izaberi / poništi sve
-EXPORT_BYPASS_DEFRINGE;Zanemari uklanjanje oreola
-EXPORT_BYPASS_DIRPYRDENOISE;Zanemari uklanjanje šuma
-EXPORT_BYPASS_DIRPYREQUALIZER;Zanemari detaljni nivo kontrasta
-EXPORT_BYPASS_RAW_CA;Zanemari [raw] ispravljanje hromatskih aberacija
-EXPORT_BYPASS_RAW_CCSTEPS;Zanemari [raw] prigušivanje lažne boje
-EXPORT_BYPASS_RAW_DCB_ENHANCE;Zanemari [raw] DCB poboljšanje
-EXPORT_BYPASS_RAW_DCB_ITERATIONS;Zanemari [raw] broj DCB prolaza
-EXPORT_BYPASS_RAW_DF;Zanemari [raw] tamno polje
-EXPORT_BYPASS_RAW_FF;Zanemari [raw] ravno polje
-EXPORT_BYPASS_RAW_GREENTHRESH;Zanemari [raw] kalibraciju zelene boje
-EXPORT_BYPASS_RAW_LINENOISE;Zanemari [raw] linijski filter šuma
-EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Zanemari [raw] LMMSE korake za poboljšanje
-EXPORT_BYPASS_SHARPENEDGE;Zanemari oštrenje ivice
-EXPORT_BYPASS_SHARPENING;Zanemari oštrenje
-EXPORT_BYPASS_SHARPENMICRO;Zanemari mikrokontrast
-EXPORT_BYPASS_SH_HQ;Zanemari oštru masku za Senke/Svetlo
-EXPORT_FASTEXPORTOPTIONS;Opcije za brz izvoz
-EXPORT_INSTRUCTIONS;Brz izvoz omogućava da zaobiđete neke od zahtevnih i sporijih procesa prilikom razvijanja slika i da zakažete fotografije za brzo razvijanje. Ovj metod je dobar za brzo razvijanje slika u manjoj rezoluciji, kada vam je bitno da fotografije dobijete što pre ili kada želite primenite zadovoljavajuće parametre za razvijanje većeg broja fotografija odjednom bez izmene njihovih profila.
-EXPORT_MAXHEIGHT;Najveća visina:
-EXPORT_MAXWIDTH;Najveća dužina:
-EXPORT_PUTTOQUEUEFAST; Zakaži za brz izvoz
-EXPORT_RAW_DMETHOD;Način rasklapanja mozaika
-EXTPROGTARGET_1;raw
-EXTPROGTARGET_2;zakazano-razvijeno
-FILEBROWSER_ADDDELTEMPLATE;Dodaj/ukloni šablone...
-FILEBROWSER_APPLYPROFILE;Primeni profil
-FILEBROWSER_APPLYPROFILE_PARTIAL;Primeni profil (polovično)
-FILEBROWSER_AUTODARKFRAME;Sam odredi tamni kadar
-FILEBROWSER_AUTOFLATFIELD;Automatski odredi ravno polje
-FILEBROWSER_BROWSEPATHHINT;Ukucajte putanju za razgledanje (Ctrl-o postavlja fokus, Ctrl-Enter prikazuje u razgledaču datoteka);nPrečice putanja: ~ — lični direktorijum, ! — direktorijum sa slikama
-FILEBROWSER_CACHE;Ostava
-FILEBROWSER_CLEARPROFILE;Obriši profil
-FILEBROWSER_COLORLABEL_TOOLTIP;Natpis u boji.\n\nKoristite priloženi meni ili prečice:\nShift-Ctrl-0 Bez boje\nShift-Ctrl-1 Crvena\nShift-Ctrl-2 Žuta\nShift-Ctrl-3 Zelena\nShift-Ctrl-4 Plana\nShift-Ctrl-5 Ljubičasta
-FILEBROWSER_COPYPROFILE;Umnoži profil
-FILEBROWSER_CURRENT_NAME;Trenutno ime:
-FILEBROWSER_DARKFRAME;Tamni kadar
-FILEBROWSER_DELETEDLGLABEL;Brisanje datoteke
-FILEBROWSER_DELETEDLGMSG;Da li sigurno želite da obrišete %1 datoteka?
-FILEBROWSER_DELETEDLGMSGINCLPROC;Da li želite da obrišete %1 izabranih datoteka, uključujući i one koje su zakazane?
-FILEBROWSER_EMPTYTRASH;Izbaci smeće
-FILEBROWSER_EMPTYTRASHHINT;Trajno briše datoteke iz smeća
-FILEBROWSER_EXTPROGMENU;Otvori pomoću
-FILEBROWSER_FLATFIELD;Ravno polje
-FILEBROWSER_MOVETODARKFDIR;Prebaci u fasciklu sa tamnim kadrovima
-FILEBROWSER_MOVETOFLATFIELDDIR;Premesti u fascikli sa ravnim poljima
-FILEBROWSER_NEW_NAME;Novo ime:
-FILEBROWSER_OPENDEFAULTVIEWER;Podrazumevani prikaz prozora (zakazano-razvijeno)
-FILEBROWSER_PARTIALPASTEPROFILE;Delimično ubaci
-FILEBROWSER_PASTEPROFILE;Ubaci profil
-FILEBROWSER_POPUPCANCELJOB;Otkaži zadatak
-FILEBROWSER_POPUPCOLORLABEL;Obojena oznaka
-FILEBROWSER_POPUPCOPYTO;Umnoži u...
-FILEBROWSER_POPUPFILEOPERATIONS;Datoteka
-FILEBROWSER_POPUPMOVEEND;Premesti na kraj zakazanih
-FILEBROWSER_POPUPMOVEHEAD;Premesti na početak zakazanih
-FILEBROWSER_POPUPMOVETO;Premesti u...
-FILEBROWSER_POPUPOPEN;Otvori
-FILEBROWSER_POPUPPROCESS;Zakaži za obradu
-FILEBROWSER_POPUPPROCESSFAST;Dodaj u zakazano (brzi izvoz)
-FILEBROWSER_POPUPPROFILEOPERATIONS;Profil
-FILEBROWSER_POPUPRANK;Ocena
-FILEBROWSER_POPUPREMOVE;Ukloni iz sistema datoteka
-FILEBROWSER_POPUPREMOVEINCLPROC;Ukloni iz sistema datoteka i zakazanog
-FILEBROWSER_POPUPRENAME;Preimenuj
-FILEBROWSER_POPUPSELECTALL;Izaberi sve
-FILEBROWSER_POPUPTRASH;Premesti u smeće
-FILEBROWSER_POPUPUNRANK;Ukloni ocenu
-FILEBROWSER_POPUPUNTRASH;Ukloni iz smeća
-FILEBROWSER_QUERYBUTTONHINT;Očisti polje za pretragu
-FILEBROWSER_QUERYHINT;Unesite deo imena datoteke za pretragu nCtrl-f postavlja fokus (u Razgledaču datoteka);nEnter pretražuje
-FILEBROWSER_QUERYLABEL; Traži:
-FILEBROWSER_RANK1_TOOLTIP;Ocena 1 *\nPrečica: Shift-1
-FILEBROWSER_RANK2_TOOLTIP;Ocena 2 *\nPrečica: Shift-2
-FILEBROWSER_RANK3_TOOLTIP;Ocena 3 *\nPrečica: Shift-3
-FILEBROWSER_RANK4_TOOLTIP;Ocena 4 *\nPrečica: Shift-4
-FILEBROWSER_RANK5_TOOLTIP;Ocena 5 *\nPrečica: Shift-5
-FILEBROWSER_RENAMEDLGLABEL;Preimenuj datoteku
-FILEBROWSER_SELECTDARKFRAME;Izaberi tamni kadar...
-FILEBROWSER_SELECTFLATFIELD;Izaberi ravno polje...
-FILEBROWSER_SHOWCOLORLABEL1HINT;Prikazuje slike označene crvenom Alt-1
-FILEBROWSER_SHOWCOLORLABEL2HINT;Prikazuje slike označene žutom Alt-2
-FILEBROWSER_SHOWCOLORLABEL3HINT;Prikazujeslike označene zelenom Alt-3
-FILEBROWSER_SHOWCOLORLABEL4HINT;Prikazuje slike označene plavom Alt-4
-FILEBROWSER_SHOWCOLORLABEL5HINT;Prikazuje slike označene ljubičastom Alt-5
-FILEBROWSER_SHOWDIRHINT;Prikazuje sve slike iz direktorijuma
-FILEBROWSER_SHOWEDITEDHINT;Prikazuje samo izmenjene slike 7
-FILEBROWSER_SHOWEDITEDNOTHINT;Prikazuje samo neismenjene slike 6
-FILEBROWSER_SHOWEXIFINFO;Prikazuje EXIF podatke i
-FILEBROWSER_SHOWRANK1HINT;Prikazuje slike ocenjene sa 1 zvezdicom
-FILEBROWSER_SHOWRANK2HINT;Prikazuje slike ocenjene sa 2 zvezdice
-FILEBROWSER_SHOWRANK3HINT;Prikazuje slike ocenjene sa 3 zvezdice
-FILEBROWSER_SHOWRANK4HINT;Prikazuje slike ocenjene sa 4 zvezdice
-FILEBROWSER_SHOWRANK5HINT;Prikazuje slike ocenjene sa 5 zvezdica
-FILEBROWSER_SHOWRECENTLYSAVEDHINT;Prikazuje nedavno sačuvane slike Alt-7
-FILEBROWSER_SHOWRECENTLYSAVEDNOTHINT;Prikazuje slike koje nisu skoro sačuvane Alt-6
-FILEBROWSER_SHOWTRASHHINT;Prikazuje slike u smeću
-FILEBROWSER_SHOWUNCOLORHINT;Prikazuje slike koje nisu označene bojom Alt-0
-FILEBROWSER_SHOWUNRANKHINT;Prikaži neocenjene slike
-FILEBROWSER_THUMBSIZE;Pregled
-FILEBROWSER_UNRANK_TOOLTIP;Neocenjeno.\nPrečica: Shift-0
-FILEBROWSER_ZOOMINHINT;Uvećava pregled
-FILEBROWSER_ZOOMOUTHINT;Umanjuje pregled
-GENERAL_ABOUT;O programu
-GENERAL_AFTER;Posle
-GENERAL_AUTO;Automatski
-GENERAL_BEFORE;Pre
-GENERAL_CANCEL;Otkaži
-GENERAL_CLOSE;Zatvori
-GENERAL_DISABLE;Isključi
-GENERAL_DISABLED;Isključeno
-GENERAL_ENABLE;Uključi
-GENERAL_ENABLED;Uključi
-GENERAL_FILE;Datoteka
-GENERAL_LANDSCAPE;Položeno
-GENERAL_NA;nema
-GENERAL_NO;Ne
-GENERAL_NONE;Ništa
-GENERAL_OK;U redu
-GENERAL_PORTRAIT;Uspravno
-GENERAL_SAVE;Sačuvaj
-GENERAL_UNCHANGED;(neizmenjeno)
-GENERAL_WARNING;Upozorenje
-HISTOGRAM_TOOLTIP_B;Prikazuje plavi histogram
-HISTOGRAM_TOOLTIP_BAR;Prikazuje/sakriva RGB indikator. Kliknite desni taster miša na umanjeni prikaz da zamrznete
-HISTOGRAM_TOOLTIP_CHRO;Prikaži/sakrij histogram hrominanse.
-HISTOGRAM_TOOLTIP_FULL;Uključuje prikaz potpunog ili histograma u razmeri.
-HISTOGRAM_TOOLTIP_G;Prikazuje zeleni histogram
-HISTOGRAM_TOOLTIP_L;Prikazuje CieLab hitogram
-HISTOGRAM_TOOLTIP_R;Prikazuje crveni histogram
-HISTOGRAM_TOOLTIP_RAW;Prikazuje/skriva RAW histogram
-HISTORY_CHANGED;Izmenjeno
-HISTORY_CUSTOMCURVE;Proizvoljna kriva
-HISTORY_FROMCLIPBOARD;Iz ostave
-HISTORY_LABEL;Istorijat
-HISTORY_MSG_1;Slika je učitana
-HISTORY_MSG_2;Profil je učitan
-HISTORY_MSG_3;Izmena profila
-HISTORY_MSG_4;Razgledanje istorijata
-HISTORY_MSG_5;Osvetljenost
-HISTORY_MSG_6;Kontrast
-HISTORY_MSG_7;Crna
-HISTORY_MSG_8;Kompenzacija ekspozicije
-HISTORY_MSG_9;Sabijanje svetlog
-HISTORY_MSG_10;Sabijanje senki
-HISTORY_MSG_11;Kriva nijansi
-HISTORY_MSG_12;Auto ekspozicija
-HISTORY_MSG_13;Odsecanje ekspozicije
-HISTORY_MSG_14;Svetlina luminanse
-HISTORY_MSG_15;Kontrast luminanse
-HISTORY_MSG_16;Crna luminanse
-HISTORY_MSG_17;Sabijanje senki l.
-HISTORY_MSG_18;Sabijanje svetlog l.
-HISTORY_MSG_19;Kriva luminanse
-HISTORY_MSG_20;Oštrenje
-HISTORY_MSG_21;Poluprečnik oštrenja
-HISTORY_MSG_22;Količina oštrenja
-HISTORY_MSG_23;Prag oštrenja
-HISTORY_MSG_24;Izoštri samo ivice
-HISTORY_MSG_25;Poluprečnik za nalaženje ivica
-HISTORY_MSG_26;Tolerancija za nalaženje ivica
-HISTORY_MSG_27;Kontrola areola oštrenja
-HISTORY_MSG_28;Količina kontrole areala
-HISTORY_MSG_29;Način oštrenja
-HISTORY_MSG_30;Poluprečnik dekonvolucije
-HISTORY_MSG_31;Količina dekonvolucije
-HISTORY_MSG_32;Prigušivanje dekonvolucije
-HISTORY_MSG_33;Ponavljanja dekonvolucije
-HISTORY_MSG_34;Izbegni odsecanje boja
-HISTORY_MSG_35;Graničnik zasićenja
-HISTORY_MSG_36;Ograniči zasićenje
-HISTORY_MSG_37;Pojačanje boja
-HISTORY_MSG_38;Način balansiranja bele
-HISTORY_MSG_39;Temperatura boje
-HISTORY_MSG_40;Zalenilo boje
-HISTORY_MSG_41;Pomeranje boje „A“
-HISTORY_MSG_42;Pomeranje boje „B“
-HISTORY_MSG_43;Uklanjanje svetlosnog šuma
-HISTORY_MSG_44;Radijus ukl. svetlosnog šuma
-HISTORY_MSG_45;Tolerancija ivice ukl. s. šuma
-HISTORY_MSG_46;Uklanjanje kolornog šuma
-HISTORY_MSG_47;Poluprečnik ukl. kolornog šuma
-HISTORY_MSG_48;Tolerancija ivice ukl. k. šuma
-HISTORY_MSG_49;Osetljivost ivice ukl. k. šuma
-HISTORY_MSG_50;Alat za senke/svetlo
-HISTORY_MSG_51;Pojačavanje svetline
-HISTORY_MSG_52;Pojačavanje senki
-HISTORY_MSG_53;Širina tonova za svetlo
-HISTORY_MSG_54;Širina tonova za senke
-HISTORY_MSG_55;Likalni kontrast
-HISTORY_MSG_56;Poluprečnik senki/svetlog
-HISTORY_MSG_57;Gruba rotacija
-HISTORY_MSG_58;Horizontalno izvrtanje
-HISTORY_MSG_59;Vertikalno izvrtanje
-HISTORY_MSG_60;Rotacija
-HISTORY_MSG_61;Rotacija
-HISTORY_MSG_62;Ispravljanje izobličenja sočiva
-HISTORY_MSG_63;Ibor snimka
-HISTORY_MSG_64;Iseci fotografiju
-HISTORY_MSG_65;Ispravljanje hr. aberacija
-HISTORY_MSG_66;Čupanje svetla
-HISTORY_MSG_67;Količina čupanja svetla
-HISTORY_MSG_68;Način čupanja svetla
-HISTORY_MSG_69;Radni prostor boja
-HISTORY_MSG_70;Izlazni prostor boja
-HISTORY_MSG_71;Ulazni profil boja
-HISTORY_MSG_72;Ispravljanje vinjetarenja
-HISTORY_MSG_73;Mešanje kanala
-HISTORY_MSG_74;Promena veličine
-HISTORY_MSG_75;Način promene veličine
-HISTORY_MSG_76;Exif metapodaci
-HISTORY_MSG_77;IPTC metapodaci
-HISTORY_MSG_78;Podaci za promeni veličine
-HISTORY_MSG_79;Širina pri promeni veličine
-HISTORY_MSG_80;Visina pri promeni veličine
-HISTORY_MSG_81;Uključena promena veličina
-HISTORY_MSG_82;Profil je izmenjen
-HISTORY_MSG_83;Kvalitetno svetlost/senke
-HISTORY_MSG_84;Ispravljanje perspektive
-HISTORY_MSG_85;Taloasni koeficijenti
-HISTORY_MSG_86;Talasno ujednačenje
-HISTORY_MSG_87;Uklanjanje šuma „biber i so“
-HISTORY_MSG_88;Prag uklanjanja šuma za „biber i so“
-HISTORY_MSG_89;Uklanjanje šuma
-HISTORY_MSG_90;Šum — osvetljenost
-HISTORY_MSG_91;Šum — boje
-HISTORY_MSG_92;Šum — gama
-HISTORY_MSG_93;Kontrast detanjnom vrednošću nivoa
-HISTORY_MSG_94;Detanjni nivo kontrasta
-HISTORY_MSG_95;Zasićenost
-HISTORY_MSG_96;„a“ kriva
-HISTORY_MSG_97;„b“ kriva
-HISTORY_MSG_98;Rastavljam mozaik
-HISTORY_MSG_99;Obrađujem
-HISTORY_MSG_100;RGB zasićenost
-HISTORY_MSG_101;HSV EQ — Nijansa
-HISTORY_MSG_102;HSV EQ — Zasićenost
-HISTORY_MSG_103;HSV EQ — Vrednsot
-HISTORY_MSG_104;Ujednačenje HSV
-HISTORY_MSG_105;Uklanjanje oreola
-HISTORY_MSG_106;Poluprečnik
-HISTORY_MSG_107;Prag
-HISTORY_MSG_108;Prag kompenz. svetlog
-HISTORY_MSG_109;Okvir za promenu veličine
-HISTORY_MSG_110;Promena veličine primenjena na
-HISTORY_MSG_111;Izbegni isecanje boja
-HISTORY_MSG_112;Ograničavanje zasićenja
-HISTORY_MSG_113;Graničnik zasićenja
-HISTORY_MSG_114;DCB ponavljanja
-HISTORY_MSG_115;Ponavljanje lažnih boja
-HISTORY_MSG_116;Unapređeni DCB
-HISTORY_MSG_117;Popravka crvene hrominanse
-HISTORY_MSG_118;Popravka plave hrominanse
-HISTORY_MSG_119;Linijsko uklaljanje šuma
-HISTORY_MSG_120;Prag ujednačenja zelene
-HISTORY_MSG_121;Sam ispravi aberacije
-HISTORY_MSG_122;Sam primeni tamni kadar
-HISTORY_MSG_123;Datoteka za tamni kadar
-HISTORY_MSG_124;Linearna ispravka eksp.
-HISTORY_MSG_126;Datoteka sa ravnim poljem
-HISTORY_MSG_127;Sam izaberi ravno polje
-HISTORY_MSG_128;Poluprečnik ravnog polja
-HISTORY_MSG_129;Način zamućenja ravnog polja
-HISTORY_MSG_130;Automatska distorzija
-HISTORY_MSG_131;Uklanjanje šuma luminanse
-HISTORY_MSG_132;Uklanjanje šuma boje
-HISTORY_MSG_133;Gama
-HISTORY_MSG_134;Gama pozicija
-HISTORY_MSG_135;Gama sloboda
-HISTORY_MSG_136;Gama nagib
-HISTORY_MSG_137;Nivo crne zelena 1
-HISTORY_MSG_138;Nivo crne crvena
-HISTORY_MSG_139;Nivo crne plava
-HISTORY_MSG_140;Nivo crne zelena 2
-HISTORY_MSG_141;Nivo crne obe zelene
-HISTORY_MSG_142;Oštrenje ivica - br. ponavljanja
-HISTORY_MSG_143;Oštrenje ivica - količina
-HISTORY_MSG_144;Mikrokontrast - količina
-HISTORY_MSG_145;Mikrokontrast - ujednačenost
-HISTORY_MSG_146;Oštrenje ivica
-HISTORY_MSG_147;Oštrenje ivica - samo luminansa
-HISTORY_MSG_148;Mikrokontrast
-HISTORY_MSG_149;Mikrokontrast - 3×3 matrica
-HISTORY_MSG_150;Uklanjanje artefakta/šuma nakon rasklapanja mozaika
-HISTORY_MSG_151;Živost boja
-HISTORY_MSG_152;Živ - Pastelni tonovi
-HISTORY_MSG_153;Živ - Zasićeni tonovi
-HISTORY_MSG_154;Živ - Zaštiti boju kože
-HISTORY_MSG_155;Živ - Izbegni pomeranje boja
-HISTORY_MSG_156;Živ - Poveži pastelno i zasićeno
-HISTORY_MSG_157;Živ - P/S prag
-HISTORY_MSG_158;MT - Jačina
-HISTORY_MSG_159;MT - Zaustavljanje ivice
-HISTORY_MSG_160;MT - Razmera
-HISTORY_MSG_161;MT - Ponavljanje premeravanja
-HISTORY_MSG_162;Mapiranje tonova
-HISTORY_MSG_163;RGB krive - crvena
-HISTORY_MSG_164;RGB krive - zelena
-HISTORY_MSG_165;RGB krive - plava
-HISTORY_MSG_166;Neutralni nivoi
-HISTORY_MSG_167;--neiskorišćeno--
-HISTORY_MSG_168;„CC“ kriva
-HISTORY_MSG_169;„CH“ kriva
-HISTORY_MSG_170;Živ - kriva
-HISTORY_MSG_171;„LC“ kriva
-HISTORY_MSG_172;Lab - Zabrani LC
-HISTORY_MSG_174;CIECAM02
-HISTORY_MSG_175;CAM02 - CAT02 adaptacija
-HISTORY_MSG_176;CAM02 - Okolina prikaza
-HISTORY_MSG_177;CAM02 - Luminansa kadra
-HISTORY_MSG_178;CAM02 - Luminansa prikaza
-HISTORY_MSG_179;CAM02 - Model bele tačke
-HISTORY_MSG_180;CAM02 - Svetlina (J)
-HISTORY_MSG_181;CAM02 - Boja (C)
-HISTORY_MSG_182;CAM02 - Automatski CAT02
-HISTORY_MSG_183;CAM02 - Kontrast (J)
-HISTORY_MSG_184;CAM02 - Okolina scene
-HISTORY_MSG_185;CAM02 - Kontrola širine tonova
-HISTORY_MSG_186;CAM02 - Algoritam
-HISTORY_MSG_187;CAM02 - Zaštita crvene i boje kože
-HISTORY_MSG_188;CAM02 - Svetlina (Q)
-HISTORY_MSG_189;CAM02 - Kontrast (Q)
-HISTORY_MSG_190;CAM02 - Zasićenost (S)
-HISTORY_MSG_191;CAM02 - Živopisnost (M)
-HISTORY_MSG_192;CAM02 - Nijansa (h)
-HISTORY_MSG_193;CAM02 - Kriva tonova 1
-HISTORY_MSG_194;CAM02 - Kriva tonova 2
-HISTORY_MSG_195;CAM02 - Kriva tonova 1
-HISTORY_MSG_196;CAM02 - Kriva tonova 2
-HISTORY_MSG_197;CAM02 - Kriva boje
-HISTORY_MSG_198;CAM02 - Kriva boje
-HISTORY_MSG_199;CAM02 - Izlazni histogrami
-HISTORY_MSG_200;CAM02 - Mapiranje tonova
-HISTORY_MSG_201;UŠ - Hrominansa C,Z
-HISTORY_MSG_202;UŠ - Hrominansa P,Y
-HISTORY_MSG_204;LMMSE koraci poboljšanja
-HISTORY_MSG_205;CAM02 - Vrući/loš pikseli
-HISTORY_MSG_206;CAT02 - Automatska luminansa kadra
-HISTORY_MSG_207;Uklanjanje oreola - kriva nijanse
-HISTORY_MSG_208;BB - Balans C i P
-HISTORY_MSG_210;FG - Ugao
-HISTORY_MSG_211;Filter gradijenta
-HISTORY_MSG_212;FV - Jačina
-HISTORY_MSG_213;Filter vinjetarenja
-HISTORY_MSG_214;Crno-bela slika
-HISTORY_MSG_215;CB - CM - Crvena
-HISTORY_MSG_216;CB - CM - Zelena
-HISTORY_MSG_217;CB - CM - Plava
-HISTORY_MSG_218;CB - Gama - Crvena
-HISTORY_MSG_219;CB - Gama - Zelena
-HISTORY_MSG_220;CB - Gama - Plana
-HISTORY_MSG_221;CB - Filter boje
-HISTORY_MSG_222;CB - Predpodešavanja
-HISTORY_MSG_223;CB - CM - Narandžasta
-HISTORY_MSG_224;CB - CM - Žuta
-HISTORY_MSG_225;CB - CM - Svetlo plava
-HISTORY_MSG_226;CB - CM - Svetlo ljubičasta
-HISTORY_MSG_227;CB - CM - Ljubičasta
-HISTORY_MSG_228;CB - Ujednačenje luminanse
-HISTORY_MSG_229;CB - Ujednačenje luminanse
-HISTORY_MSG_230;CB - Režim
-HISTORY_MSG_231;CB - Pre krive
-HISTORY_MSG_232;CB - Pre vrste krive
-HISTORY_MSG_233;CB - Nakon prive
-HISTORY_MSG_234;CB - Nakon vrste krive
-HISTORY_MSG_236;--neiskorišćeno--
-HISTORY_MSG_238;FG - Umekšanje
-HISTORY_MSG_239;FG - Jačina
-HISTORY_MSG_240;FG - Centar
-HISTORY_MSG_241;FV - Umekšanje
-HISTORY_MSG_242;FV - Krivoća
-HISTORY_MSG_243;FV - Prečnik
-HISTORY_MSG_244;FV - Jačina
-HISTORY_MSG_245;FV - Centar
-HISTORY_MSG_246;CL kriva
-HISTORY_MSG_247;LH kriva
-HISTORY_MSG_248;HH kriva
-HISTORY_MSG_249;CbDL - Prag
-HISTORY_MSG_250;UŠ - Poboljšanje
-HISTORY_MSG_251;CB - Algoritam
-HISTORY_NEWSNAPSHOT;Dodaj
-HISTORY_NEWSNAPSHOT_TOOLTIP;Prečica: Alt-s
-HISTORY_SNAPSHOT;Snimak
-HISTORY_SNAPSHOTS;Snimak
-HRESHOLDSELECTOR_BL;Dole-levo
-IPTCPANEL_CATEGORY;Kategorija
-IPTCPANEL_CITY;Grad
-IPTCPANEL_COPYHINT;Koppiraj IPTC pšodešavanja u ostavu
-IPTCPANEL_COUNTRY;Država
-IPTCPANEL_CREDIT;Zasluge
-IPTCPANEL_CREDITHINT;Ukazuje da onaj ko izdaje sliku ne mora biti autor/vlasnik (Zasluge).
-IPTCPANEL_DATECREATED;Datum nastanka
-IPTCPANEL_EMBEDDED;Ugnježđeno
-IPTCPANEL_EMBEDDEDHINT;Vrati polja na IPTC podatke ugnježđene u sliku
-IPTCPANEL_HEADLINE;Naslov
-IPTCPANEL_INSTRUCTIONS;Uputstva
-IPTCPANEL_KEYWORDS;Ključne reči
-IPTCPANEL_PASTEHINT;Ubaci IPTC podešavanja iz ostave
-IPTCPANEL_RESET;Vrati
-IPTCPANEL_RESETHINT;Postavlja podrazumevane vrednosti profila
-IPTCPANEL_SOURCE;Izvor
-IPTCPANEL_TITLE;Natpis
-MAIN_BUTTON_FULLSCREEN;Ceo ekran
-MAIN_BUTTON_NAVNEXT_TOOLTIP;Šalje vas na narednu sliku u odnosu na otvorenu u prozoru za uređivanje.\nPrečica: Shift-F4\n\nTakođe, omoguća vam da idete na narednu sliku u odnosu na trenutno izabranu u razgledaču ili filmskoj traci.\nPrečica: F4
-MAIN_BUTTON_NAVPREV_TOOLTIP;Šalje vas na prethodnu sliku u odnosu na otvorenu u prozoru za uređivanje.\nPrečica: Shift-F3\n\nnTakođe, omoguća vam da idete na narednu sliku u odnosu na trenutno izabranu u razgledaču ili filmskoj traci.\nPrečica: F3
-MAIN_BUTTON_NAVSYNC_TOOLTIP;Usaglašava razgledač datoteka ili filmsku traku sa delom za uređivanje radi umanjenog prikaza trenutno otvorene slike i čisti sve izabrane filtere.\nPrečica: x\n\nKao i prethodna operacija, ali bez čišćenja izabranih filtera:\nPrečica: y\n(Umanjeni prikaz otvorene slike neće biti prikazan ukoliko je izfiltriran).
-MAIN_BUTTON_PREFERENCES;Postavke
-MAIN_BUTTON_PUTTOQUEUE;Zakaži
-MAIN_BUTTON_PUTTOQUEUE_TOOLTIP;Dodaje trenutnu sliku u zakazane Ctrl+B
-MAIN_BUTTON_SAVE;Sačuvaj
-MAIN_BUTTON_SAVE_TOOLTIP;Čuva trenutnu sliku Ctrl+S
-MAIN_BUTTON_SENDTOEDITOR;Uredi
-MAIN_BUTTON_SENDTOEDITOR_TOOLTIP;Uređuje trenutnu sliku u spoljnom programu Ctrl+E
-MAIN_BUTTON_SHOWHIDESIDEPANELS_TOOLTIP;Prikazuje/sakriva sve bočne površine m
-MAIN_BUTTON_UNFULLSCREEN;Napusti ceo ekran
-MAIN_FRAME_BATCHQUEUE;Zakazane datoteke
-MAIN_FRAME_BATCHQUEUE_TOOLTIP; Zakazano Ctrl-F3
-MAIN_FRAME_EDITOR;Uređivač
-MAIN_FRAME_EDITOR_TOOLTIP; Uređivač Ctrl-F4
-MAIN_FRAME_FILEBROWSER;Razgledač datoteka
-MAIN_FRAME_FILEBROWSER_TOOLTIP; Razgledač datoteka Ctrl-F2
-MAIN_FRAME_PLACES;Mesta
-MAIN_FRAME_PLACES_ADD;Dodaj
-MAIN_FRAME_RECENT;Recent Fascikle
-MAIN_MSG_ALREADYEXISTS;Datoteka već postoji.
-MAIN_MSG_CANNOTLOAD;Ne mogu da učitam sliku
-MAIN_MSG_CANNOTSAVE;Greška pri čuvanju datoteke
-MAIN_MSG_CANNOTSTARTEDITOR;Ne mogu da pokrenem program za uređivanje.
-MAIN_MSG_CANNOTSTARTEDITOR_SECONDARY;Izaberite ispravnu putanju u „Postavkama“.
-MAIN_MSG_EMPTYFILENAME;Nije određeno ime datoteke!
-MAIN_MSG_IMAGEUNPROCESSED;Ova radnja zahteva da najpre stavite izabrane slike u listu zakazanih.
-MAIN_MSG_NAVIGATOR;Navigator
-MAIN_MSG_OPERATIONCANCELLED;Radnja je otkazana
-MAIN_MSG_PATHDOESNTEXIST;Ne postoji putanja \n\n%1\n\n. Postavite ispravnu putanji iz podešavanja programa.
-MAIN_MSG_QOVERWRITE;Da li želite da prepišete?
-MAIN_MSG_SETPATHFIRST;Morate izabrati ciljnu putanju iz podešavanja programa\nkako bi koristili ovu funkciju!
-MAIN_MSG_WRITEFAILED;Ne mogu da upišem\n\n"%1"\n\nProverite da li fascikla postoji i da li imate ovlašćenja za upis u nju.
-MAIN_TAB_COLOR;Boja
-MAIN_TAB_COLOR_TOOLTIP;Alt-c
-MAIN_TAB_DETAIL;Detalji
-MAIN_TAB_DETAIL_TOOLTIP;Alt-d
-MAIN_TAB_DEVELOP;Razvijanje
-MAIN_TAB_EXIF;Exif
-MAIN_TAB_EXPORT; Brzi izvoz
-MAIN_TAB_EXPOSURE;Svetlost
-MAIN_TAB_EXPOSURE_TOOLTIP;Alt-e
-MAIN_TAB_FILTER;Filter
-MAIN_TAB_IPTC;IPTC
-MAIN_TAB_METADATA;Metapodaci
-MAIN_TAB_METADATA_TOOLTIP;Alt-m
-MAIN_TAB_RAW;RAW
-MAIN_TAB_RAW_TOOLTIP;Alt-r
-MAIN_TAB_TRANSFORM;Ispravke
-MAIN_TAB_TRANSFORM_TOOLTIP;Alt-t
-MAIN_TOOLTIP_BACKCOLOR0;Boja pozadine za pregled: Na osnovu teme\nPrečica: 9
-MAIN_TOOLTIP_BACKCOLOR1;Boja pozadine za pregled: Crna\nPrečica: 9
-MAIN_TOOLTIP_BACKCOLOR2;Boja pozadine za pregled: Bela\nPrečica: 9
-MAIN_TOOLTIP_BEFOREAFTERLOCK;Zaključaj / otključaj pre prikaza\n\nZaključaj: zadrži prethodni prikaz.\nKorisno ukoliko želite da prikažete ukupni efekat više alata.\nPoređenje se još može napraviti i za bilo koje stanje iz Istorije.\n\nOtključaj: prethodni prikaz dolazi nakon prikaza jednog poslednjeg koraka, prikazujući sliku pre primene trenutnog alata.
-MAIN_TOOLTIP_HIDEHP;Prikazuje/sakriva levu površ, zajedno sa istorijatom (prečica: H)
-MAIN_TOOLTIP_INDCLIPPEDH;Prikazuje isečene svetle delove
-MAIN_TOOLTIP_INDCLIPPEDS;Prikazuje isečene tamne delove
-MAIN_TOOLTIP_PREVIEWB;Pregled plavog kanaza.\nPrečica: b
-MAIN_TOOLTIP_PREVIEWFOCUSMASK;Prikazuje oblast u fokusu.\nPrečica: Shift-f\n\nNa uvećanju preciznije radi sa slikama koje imaju malu dubinsku oštrinu i malo šuma.\n\nZa precizniji prikaz kod slika sa šumom pregledajte fokus na manjem uvećanju od oko 10-30%.\n\nPrikaz fokusirane oblasti će usporiti pregled fotografija.
-MAIN_TOOLTIP_PREVIEWG;Pregled zelenog kanala.\nPrečica: g
-MAIN_TOOLTIP_PREVIEWL;Pregled luminanse.\nPrečica: v\n\n0.299*R + 0.587*G + 0.114*B
-MAIN_TOOLTIP_PREVIEWR;Pregled crvenog kanala.\nPrečica: r
-MAIN_TOOLTIP_QINFO;Osnovni podaci o slici I
-MAIN_TOOLTIP_SHOWHIDELP1;Prikazuje/sakriva levu površ l
-MAIN_TOOLTIP_SHOWHIDERP1;Prikazuje/sakriva desnu površ Alt-l
-MAIN_TOOLTIP_SHOWHIDETP1;Prikazuje/sakriva gornju površ Shift-L
-MAIN_TOOLTIP_THRESHOLD;Prag
-MAIN_TOOLTIP_TOGGLE;Prikazuje sliku pre i posle obrade B
-NAVIGATOR_XY_FULL;Širina = %1, Visina = %2
-NAVIGATOR_XY_NA;x = ○, y = ○
-PARTIALPASTE_BASICGROUP;Osnovna podešavanja
-PARTIALPASTE_CACORRECTION;Ispravljanje aberacija
-PARTIALPASTE_CHANNELMIXER;Mešanje kanala
-PARTIALPASTE_CHANNELMIXERBW;Crno-bela fotografija
-PARTIALPASTE_COARSETRANS;Rotacija za 90˚ / izvrtanje
-PARTIALPASTE_COLORAPP;CIECAM 2002 model izgleda boja
-PARTIALPASTE_COLORGROUP;Podešavanje boja
-PARTIALPASTE_COMMONTRANSFORMPARAMS;Sam popuni
-PARTIALPASTE_COMPOSITIONGROUP;Podešavanje kompozicije
-PARTIALPASTE_CROP;Iseci
-PARTIALPASTE_DARKFRAMEAUTOSELECT;Automatski izbor tamnog kadra
-PARTIALPASTE_DARKFRAMEFILE;Datoteka za tamni kadar
-PARTIALPASTE_DEFRINGE;Uklanjanje oreola
-PARTIALPASTE_DETAILGROUP;Podešavanje detalja
-PARTIALPASTE_DIALOGLABEL;Delimočno ubacuje profil za obradu
-PARTIALPASTE_DIRPYRDENOISE;Uklanjanje šuma
-PARTIALPASTE_DIRPYREQUALIZER;Kontrast nivoima detalja
-PARTIALPASTE_DISTORTION;Ispravljanje izobličenja
-PARTIALPASTE_EPD;Mapiranje tonova
-PARTIALPASTE_EVERYTHING;Sve
-PARTIALPASTE_EXIFCHANGES;Izmene exif podataka
-PARTIALPASTE_EXPOSURE;Ekspozicija
-PARTIALPASTE_FLATFIELDAUTOSELECT;Automatski izbor RK
-PARTIALPASTE_FLATFIELDBLURRADIUS;Poluprečnik zamućenja RK
-PARTIALPASTE_FLATFIELDBLURTYPE;Način zamućenja RK
-PARTIALPASTE_FLATFIELDFILE;Datoteka za ravni kadar
-PARTIALPASTE_GRADIENT;Filter gradijenta
-PARTIALPASTE_HSVEQUALIZER;Ujednačenje HSV
-PARTIALPASTE_ICMSETTINGS;ICM podešavanja
-PARTIALPASTE_IMPULSEDENOISE;Impulsno uklanjanje šuma
-PARTIALPASTE_IPTCINFO;IPTC podavi
-PARTIALPASTE_LABCURVE;Lab kriva
-PARTIALPASTE_LENSGROUP;Podešavanja objektiva
-PARTIALPASTE_LENSPROFILE;Profil za ispravke objektiva
-PARTIALPASTE_PCVIGNETTE;Filter vinjetarenja
-PARTIALPASTE_PERSPECTIVE;Perspektiva
-PARTIALPASTE_PREPROCESS_GREENEQUIL;Ujednačavanje zelene
-PARTIALPASTE_PREPROCESS_LINEDENOISE;Linijski filter šuma
-PARTIALPASTE_RAWCACORR_AUTO;Auto hromatske aberacije
-PARTIALPASTE_RAWEXPOS_BLACK;Nivo crne
-PARTIALPASTE_RAWEXPOS_LINEAR;Linearni faktor ispravke RAW bele tačke
-PARTIALPASTE_RAWGROUP;Raw podešavanja
-PARTIALPASTE_RAW_DCBENHANCE;Primeni korak DCB poboljšanja
-PARTIALPASTE_RAW_DCBITERATIONS;Broj DCB ponavljanja
-PARTIALPASTE_RAW_DMETHOD;Način rasklapanja mozaika
-PARTIALPASTE_RAW_FALSECOLOR;Koraci prigušenja lažne boje pri rasklapanju mozaika
-PARTIALPASTE_RAW_LMMSEITERATIONS;LMMSE koraci poboljšanja
-PARTIALPASTE_RESIZE;Promena veličine
-PARTIALPASTE_RGBCURVES;RGB krive
-PARTIALPASTE_ROTATION;Rotacija
-PARTIALPASTE_SHADOWSHIGHLIGHTS;Senke/Svetlost
-PARTIALPASTE_SHARPENEDGE;Ivice
-PARTIALPASTE_SHARPENING;Oštrenje
-PARTIALPASTE_SHARPENMICRO;Mikrokontrast
-PARTIALPASTE_VIBRANCE;Živost boja
-PARTIALPASTE_VIGNETTING;Ispravljanje vinjetarenja
-PARTIALPASTE_WHITEBALANCE;Balans bele
-PREFERENCES_ADD;Dodaj
-PREFERENCES_APPLNEXTSTARTUP;primenjuje se nakon ponovnog pokretanja
-PREFERENCES_AUTOMONPROFILE;Sam primeni profile monitora iz operativnog sistema
-PREFERENCES_BATCH_PROCESSING;Obrada zakzanog
-PREFERENCES_BEHADDALL;Sve u „Dodaj“
-PREFERENCES_BEHADDALLHINT;Postavlja sve parametre u režim Dodaj.\nNjihovo podešavanje pomoću alata iz panela za zakazano će biti razlike sačuvanih vrednosti.
-PREFERENCES_BEHAVIOR;Ponašanje
-PREFERENCES_BEHSETALL;Sve u „Postavi“
-PREFERENCES_BEHSETALLHINT;Postavlja sve parametre u režim Postavi.\nNjihovo podešavanje pomoću alata iz panela za zakazano će biti apsolutne vrednosti kao što su i izabrane.
-PREFERENCES_BLACKBODY;Obična sijalica
-PREFERENCES_CACHEMAXENTRIES;Najveći broj mest u ostavi
-PREFERENCES_CACHEOPTS;Podešavanje ostave
-PREFERENCES_CACHETHUMBHEIGHT;Najveća visina prikaza
-PREFERENCES_CLIPPINGIND;Pokazivači odsečenih delova
-PREFERENCES_CUSTPROFBUILD;Izgradnja proizvoljnog početnog profila slike
-PREFERENCES_CUSTPROFBUILDHINT;Izvršna datoteka (ili skripta) koja se poziva kada izgrađujete novi početni profil za sliku.nPrihvata parametre iz komandne linije radi pravljenja .pp3 datoteke na osnovu nekih pravila:n[Putanja do RAW/JPG] [Putanja podrazumevanog profila] [Blenda] [Ekspozicija u s] [Žižna dužina mm] [ISO] [Objektiv] [Foto-aparat]
-PREFERENCES_CUSTPROFBUILDKEYFORMAT;Ključni formati
-PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Naziv
-PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;BrOznake
-PREFERENCES_CUSTPROFBUILDPATH;Izvršna putanja
-PREFERENCES_D50;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
-PREFERENCES_DARKFRAMEFOUND;Nađen
-PREFERENCES_DARKFRAMESHOTS;snimaka
-PREFERENCES_DARKFRAMETEMPLATES;šabloni
-PREFERENCES_DATEFORMAT;Format datuma
-PREFERENCES_DATEFORMATHINT;Možete zadati sledeće formate:\n%y :godina\n%m : mesec\n%d : dan\n\nU Srbiji se najviše koristi:\n%d.%m.%y
-PREFERENCES_DIRDARKFRAMES;Direktorijum tamnog kadra
-PREFERENCES_DIRHOME;Lični direktorijum
-PREFERENCES_DIRLAST;Poslednji direktorijum
-PREFERENCES_DIROTHER;Neki drugi
-PREFERENCES_DIRSELECTDLG;Bira određeni direktorijum sa slikama...
-PREFERENCES_DIRSOFTWARE;Direktorijum sa instalacijom
-PREFERENCES_EDITORLAYOUT;Razmeštaj programa
-PREFERENCES_EXTERNALEDITOR;Spoljni uređivač
-PREFERENCES_FBROWSEROPTS;Opcije razgledača datoteke
-PREFERENCES_FILEFORMAT;Format datoteke
-PREFERENCES_FLATFIELDFOUND;Nađeno
-PREFERENCES_FLATFIELDSDIR;Direktorijum za ravna polja
-PREFERENCES_FLATFIELDSHOTS;snimaka
-PREFERENCES_FLATFIELDTEMPLATES;šabloni
-PREFERENCES_FLUOF2;Florescentna F2
-PREFERENCES_FLUOF7;Florescentna F7
-PREFERENCES_FLUOF11;Florescentna F11
-PREFERENCES_FORIMAGE;Za datoteke sa slikama
-PREFERENCES_FORRAW;Za RAW datoteke
-PREFERENCES_GIMPPATH;Direktorijum sa instaliranim Gimpom
-PREFERENCES_GREY;Yb luminansa izlaznog uređaja (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram u levoj površi
-PREFERENCES_HLTHRESHOLD;Prag za odsečene svetle delove
-PREFERENCES_ICCDIR;ICC direktorijum
-PREFERENCES_IMPROCPARAMS;Podrazumevani parametri za obradu slika
-PREFERENCES_INTENT_ABSOLUTE;Apsolutno kolorimetrijski
-PREFERENCES_INTENT_PERCEPTUAL;Perceptualno
-PREFERENCES_INTENT_RELATIVE;Relativno kolorimetrijski
-PREFERENCES_INTENT_SATURATION;Zasićeni prikaz
-PREFERENCES_INTERNALTHUMBIFUNTOUCHED;Koristi ugnježđeni RAW prikaz do izmene
-PREFERENCES_LANGAUTODETECT;Sam otkrij
-PREFERENCES_MENUGROUPEXTPROGS;Grupiši "Otvori sa"
-PREFERENCES_MENUGROUPFILEOPERATIONS;Grupiši radnje nad datotekama
-PREFERENCES_MENUGROUPLABEL;Grupiši obeležavanje
-PREFERENCES_MENUGROUPPROFILEOPERATIONS;Grupiši radnje sa profilima
-PREFERENCES_MENUGROUPRANK;Grupiši ocenjivanje
-PREFERENCES_MENUOPTIONS;Opcije menija
-PREFERENCES_METADATA;Metapodaci
-PREFERENCES_MULTITAB;Režim u više listova
-PREFERENCES_MULTITABDUALMON;Režim u više listova, na drugom monitoru
-PREFERENCES_OUTDIR;Izlazni direktorijum
-PREFERENCES_OUTDIRFOLDER;Sačuvaj u fasciklu
-PREFERENCES_OUTDIRFOLDERHINT;Stavlja sačuvane slike u
-PREFERENCES_OUTDIRTEMPLATE;Upotrebi šablon
-PREFERENCES_OUTDIRTEMPLATEHINT;Možete da zadate sledeće skraćenice za formatiranje:\n%f, %d1, %d2, ..., %p1, %p2, ...\n\nOvi znakovi za formatiranje se odnose na direktorijume, podputanje putanja do raw datoteke.\n\nNa primer, ukoliko je otvorena slika /home/ivan/slike/02.09.2010/dsc0012.nef, skraćenice označavaju:\n%f=dsc0012, %d1=02.09.2010, %d2=slike, ...\n%p1=/home/ivan/slike/02.09.2010, %p2=/home/ivan/slike, %p3=/home/ivan, ...\n\nUkoliko želite da sačuvate razvijenu sliku pored originala, unesite:\n%p1/%f\n\nUkoliko želite da sačuvate izlaznu sliku u direktorijum „razvijene“ koji se nalazi gde i originalna slika, unesite:\n%p1/razvijene/%f\n\nUkoliko želite da sačuvate razvijenu sliku u direktorijum „/home/ivan/razvijene“, a da struktura poddirektorijuma ostane očuvana, unesite:\n%p2/razvijene/%d1/%f
-PREFERENCES_OVERLAY_FILENAMES;Postavi preko umanjenog prikaza
-PREFERENCES_OVERWRITEOUTPUTFILE;Prepiši postojeće izlazne datoteke
-PREFERENCES_PANFACTORLABEL;Faktor
-PREFERENCES_PARSEDEXT;Ekstenzije za prikaz
-PREFERENCES_PARSEDEXTADD;Dodaj ekstenziju
-PREFERENCES_PARSEDEXTADDHINT;Dodaje upisanu ekstenziju na spisak
-PREFERENCES_PARSEDEXTDELHINT;Briše izabranu ekstenziju iz spiska
-PREFERENCES_PROFILEHANDLING;Rad sa profilima obrade
-PREFERENCES_PROFILELOADPR;Prioritet učitavanja profila
-PREFERENCES_PROFILEPRCACHE;Profil u ostavu
-PREFERENCES_PROFILEPRFILE;Profil uz ulaznu datoteku
-PREFERENCES_PROFILESAVECACHE;Sačuvaj parametre obrade u ostavu
-PREFERENCES_PROFILESAVEINPUT;Sačuvaj paramtre obrade pored ulazne datoteke
-PREFERENCES_PROPERTY;Osobina
-PREFERENCES_PSPATH;Direktorijum sa instaliranim Adobe Fotošopom
-PREFERENCES_SELECTLANG;Jezik
-PREFERENCES_SET;Postavi
-PREFERENCES_SHOWBASICEXIF;Prikaži osnovne Exif podatke
-PREFERENCES_SHOWDATETIME;Prikaži datum i vreme
-PREFERENCES_SHOWEXPOSURECOMPENSATION;Dodaj kompenzaciju ekspozicije
-PREFERENCES_SHTHRESHOLD;Prag za odsečene tamne delove
-PREFERENCES_SINGLETAB;Režim u jednom listu
-PREFERENCES_SINGLETABVERTAB;Režim u jednom listu, vertikalni listovi
-PREFERENCES_SND_BATCHQUEUEDONE;Obrađene su zakazane datoteke
-PREFERENCES_SND_HELP;Unesite putanju do datoteke ili ostavite prazno ukoliko ne želite zvuk. Na Windows-u možete da koristite „SystemDefault“, „SystemAsterisk“ za sistemske zvuke.
-PREFERENCES_SND_LNGEDITPROCDONE;Urednik je završio obradu
-PREFERENCES_SND_THRESHOLDSECS;br. sekundi
-PREFERENCES_STARTUPIMDIR;Direktorijum po pokretanju
-PREFERENCES_TAB_BROWSER;Pregled datoteka
-PREFERENCES_TAB_COLORMGR;Upravljanje bojama
-PREFERENCES_TAB_GENERAL;Opšte
-PREFERENCES_TAB_IMPROC;Obrada slike
-PREFERENCES_TAB_SOUND;Zvuci
-PREFERENCES_TP_LABEL;Površ alata:
-PREFERENCES_TP_VSCROLLBAR;Sakrij klizače u oblasti sa alatkama
-PREFERENCES_TUNNELMETADATA;Kopiraj neizmenjene IPTC/XMP (kada je slika označena drugim programom)
-PREFERENCES_USEBUNDLEDPROFILES;Koristi profile koji dolaze uz program
-PREFERENCES_VIEW;Balans bele izlaznog uređaja (monitor, TV, projaketor i dr.)
-PREFERENCES_WORKFLOW;Tok obrade
-PROFILEPANEL_COPYPPASTE;Parametri za kopiranje
-PROFILEPANEL_GLOBALPROFILES;Profili iz programa
-PROFILEPANEL_LABEL;Profili obrade
-PROFILEPANEL_LOADDLGLABEL;Učitaj profil za obradu...
-PROFILEPANEL_LOADPPASTE;Parametri za učitavanje
-PROFILEPANEL_MODE_TIP;Način dopune profila koji se koristi za obradu.\n\nPritisnuta dugmad: delimični profili se prevode u potpune profile, a nedostajuće vrednosoti se menjaju podrazumevanim vrednostim.\n\nPuštena dugmad: profili će biti primenjeni kakvi jesu, uz izmeni samo onih vrednosti koje sadrži profil.
-PROFILEPANEL_MYPROFILES;Moji profili
-PROFILEPANEL_PASTEPPASTE;Parametri za ubacivanje
-PROFILEPANEL_PCUSTOM;Proizvoljno
-PROFILEPANEL_PFILE;Iz datoteke
-PROFILEPANEL_PINTERNAL;Neutralno
-PROFILEPANEL_PLASTSAVED;Od poslednjeg čuvanja
-PROFILEPANEL_SAVEDLGLABEL;Čuva parametre za obradu...
-PROFILEPANEL_SAVEPPASTE;Parametri za čuvanje
-PROFILEPANEL_TOOLTIPCOPY;Kopira trenutni profil u ostavu
-PROFILEPANEL_TOOLTIPLOAD;Učitava profil iz datoteke
-PROFILEPANEL_TOOLTIPPASTE; Učitava profil iz
-PROFILEPANEL_TOOLTIPSAVE;Čuva trenutni profil
-PROGRESSBAR_LOADING;Učitavam sliku...
-PROGRESSBAR_LOADINGTHUMBS;Učitavam prikaze...
-PROGRESSBAR_LOADJPEG;Učitavam JPEG datoteku...
-PROGRESSBAR_LOADPNG;Učitavam PNG datoteku...
-PROGRESSBAR_LOADTIFF;Učitavam TIFF datoteku...
-PROGRESSBAR_NOIMAGES;Nisu pronađene slike
-PROGRESSBAR_PROCESSING;Obrađujem sliku...
-PROGRESSBAR_PROCESSING_PROFILESAVED;Obrađujem sačuvani profil
-PROGRESSBAR_READY;Čekam
-PROGRESSBAR_SAVEJPEG;Čuvam JPEG datoteku...
-PROGRESSBAR_SAVEPNG;Čuvam PNG datoteku...
-PROGRESSBAR_SAVETIFF;Čuvam TIFF datoteku...
-PROGRESSBAR_SNAPSHOT_ADDED;Dodat je snimak
-PROGRESSDLG_PROFILECHANGEDINBROWSER;Profil izmenjen u razgledaču
-P_GAMMA_CURV;gama
-QINFO_ISO;ISO
-QINFO_NOEXIF;Nisu dostupni Exif podaci.
-SAVEDLG_AUTOSUFFIX;Sam dodaj sufiks ukoliko datoteka već postoji
-SAVEDLG_FILEFORMAT;Format datoteke
-SAVEDLG_FORCEFORMATOPTS;Primoraj mogućnosti za čuvanje
-SAVEDLG_JPEGQUAL;JPEG kvalitet
-SAVEDLG_PNGCOMPR;PNG pakovanje
-SAVEDLG_PUTTOQUEUE;Zakazuje sliku za obradu
-SAVEDLG_PUTTOQUEUEHEAD;Premešta sliku na početak zakazanih
-SAVEDLG_PUTTOQUEUETAIL;Premešta sliku na kraj zakazanih
-SAVEDLG_SAVEIMMEDIATELY;Odmah sačuvaj
-SAVEDLG_SAVESPP;Sačuvaj parametre obrade uz sliku
-SAVEDLG_SUBSAMP;Poduzorkovanje
-SAVEDLG_SUBSAMP_1;Najbolja kompresija
-SAVEDLG_SUBSAMP_2;Balansirano
-SAVEDLG_SUBSAMP_3;Najbolji kvalitet
-SAVEDLG_SUBSAMP_TOOLTIP;Najbolja kompresija: 4:1:1\nBalansirano: 4:2:2\nNajbolji kvalitet: 4:4:4
-SAVEDLG_TIFFUNCOMPRESSED;Nezapakovani TIFF
-SAVEDLG_WARNFILENAME;Datoteka će biti nazvana
-SHCSELECTOR_TOOLTIP;Kliknite desno dugme miša da ponovo vratite poziciju ova tri klizača.
-THRESHOLDSELECTOR_B;Dole
-THRESHOLDSELECTOR_BR;Dole-desno
-THRESHOLDSELECTOR_HINT;Pritisnite dugme Shift za pomeranje pojedinačnih tačaka.
-THRESHOLDSELECTOR_T;Gore
-THRESHOLDSELECTOR_TL;Gore-levo
-THRESHOLDSELECTOR_TR;Gore-desno
-TOOLBAR_TOOLTIP_CROP;Postavlja okvir za isecanje (prečica: C)
-TOOLBAR_TOOLTIP_HAND;Alat za pomeranje (prečica: N)
-TOOLBAR_TOOLTIP_STRAIGHTEN;Ispravlja liniju horizonta (prečica: S)
-TOOLBAR_TOOLTIP_WB;Određuje balans bele iz tačke (prečica: W)
-TP_BWMIX_ALGO;OYCPM algoritam
-TP_BWMIX_ALGO_LI;Linearno
-TP_BWMIX_ALGO_SP;Specijalni efekti
-TP_BWMIX_ALGO_TOOLTIP;Linearno: proizvodi normalni linearni odgovor.\nSpecijalni efekti: proizvodi specijalne efekte mešajući kanale nelinearno.
-TP_BWMIX_AUTOCH;Auto
-TP_BWMIX_CC_ENABLED;Podesi komplementarnu boju
-TP_BWMIX_CC_TOOLTIP;Omogući za automatsko podešavanje komplementarne boje u ROYGCBPM režimu.
-TP_BWMIX_CHANNEL;Ujednačavanje luminanse
-TP_BWMIX_CURVEEDITOR1;„Pre“ krivulje
-TP_BWMIX_CURVEEDITOR2;„Nakon“ krivulje
-TP_BWMIX_CURVEEDITOR_AFTER_TOOLTIP;Kriva tonova nakon CB prevođenja, na kraju tretmana.
-TP_BWMIX_CURVEEDITOR_BEFORE_TOOLTIP;Kriva tonova, tik pred CB prevođenje.\nMože da uzme u obzir i komponente boje.
-TP_BWMIX_CURVEEDITOR_LH_TOOLTIP;Luminansa na osnovu nijanse L=f(H).\nObratite pažnju na ekstremne vrednosti pošto one mogu da naprave neželjene efekte.
-TP_BWMIX_FILTER;Filter boja
-TP_BWMIX_FILTER_BLUE;Plava
-TP_BWMIX_FILTER_BLUEGREEN;Plavo-zelena
-TP_BWMIX_FILTER_GREEN;Zelena
-TP_BWMIX_FILTER_GREENYELLOW;Zeleno-žuta
-TP_BWMIX_FILTER_NONE;Ni jedna
-TP_BWMIX_FILTER_PURPLE;Ljubičasta
-TP_BWMIX_FILTER_RED;Crvena
-TP_BWMIX_FILTER_REDYELLOW;Crveno-Žuta
-TP_BWMIX_LABEL;Crna i bela
-TP_BWMIX_MET;Način
-TP_BWMIX_MET_CHANMIX;Mešanje kanala
-TP_BWMIX_MET_DESAT;Uklanjanje boje
-TP_BWMIX_MET_LUMEQUAL;Ujednačavanje luminanse
-TP_BWMIX_RGBLABEL;R: %1%% G: %2%% B: %3%% Ukupno: %4%%
-TP_BWMIX_RGBLABEL_HINT;Konačni RGB faktori koji se brinu o opcijama za mešanje.\n„Ukupno“ prikazuje zbir RGB vrednosti:\n- u 100% u relativnom režimu\n- više (svetlije) ili manje (tamnije) od 100% u apsolutnom režimu.
-TP_BWMIX_RGB_TOOLTIP;Mešanje RGB kanala. Koristite postojeće prepodešene parametre kao vodilju.\nObratite pažnju na negativne vrednsti koje mogu da naprave greške unutar slike ili izazovu nepravilno ponašanje.
-TP_BWMIX_SETTING;Prepodešeno
-TP_BWMIX_SETTING_TOOLTIP;Različite podešene vrednosti (film, pejzaž i dr.) ili ručno podešene vrednosti mešanja kanala.
-TP_BWMIX_SET_HIGHCONTAST;Veliki kontrast
-TP_BWMIX_SET_HIGHSENSIT;Velika osetljivost
-TP_BWMIX_SET_HYPERPANCHRO;Jako panhromatski
-TP_BWMIX_SET_INFRARED;Infracrveno
-TP_BWMIX_SET_LANDSCAPE;Pejzaž
-TP_BWMIX_SET_LOWSENSIT;Niska osetljivost
-TP_BWMIX_SET_LUMINANCE;Luminansa
-TP_BWMIX_SET_NORMCONTAST;Normalni kontrast
-TP_BWMIX_SET_ORTHOCHRO;Ortohromatski
-TP_BWMIX_SET_PANCHRO;Panhromatski
-TP_BWMIX_SET_PORTRAIT;Portret
-TP_BWMIX_SET_RGBABS;Apsolutni RGB mešanja kanala
-TP_BWMIX_SET_RGBREL;Relativni RGB mešanja kanala
-TP_BWMIX_SET_ROYGCBPMABS;Apsolutni ROYGCBPM mešanja kanala
-TP_BWMIX_SET_ROYGCBPMREL;Relativni ROYGCBPM mešanja kanala
-TP_BWMIX_TCMODE_FILMLIKE;Crno-belo, nalik filmu
-TP_BWMIX_TCMODE_SATANDVALBLENDING;Crno-beli, stapanje zasićenosti i vrednosti
-TP_BWMIX_TCMODE_STANDARD;Crno-beli, uobičajeni
-TP_BWMIX_TCMODE_WEIGHTEDSTD;Crno-beli, mereni standard
-TP_BWMIX_VAL;L
-TP_CACORRECTION_BLUE;Plava
-TP_CACORRECTION_LABEL;Hromatke aberacije
-TP_CACORRECTION_RED;Crvena
-TP_CHMIXER_BLUE;Plava
-TP_CHMIXER_GREEN;Zelena
-TP_CHMIXER_LABEL;Mešanje kanala
-TP_CHMIXER_RED;Crvena
-TP_CHROMATABERR_LABEL;Hromatske aberacije
-TP_COARSETRAF_TOOLTIP_HFLIP;Izvrće sliku horizontalno
-TP_COARSETRAF_TOOLTIP_ROTLEFT;Okreće sliku ulevo
-TP_COARSETRAF_TOOLTIP_ROTRIGHT;Okreće sliku udesno
-TP_COARSETRAF_TOOLTIP_VFLIP;Izvrće sliku vertikalno
-TP_COLORAPP_ALGO;Algoritam
-TP_COLORAPP_ALGO_ALL;Sve
-TP_COLORAPP_ALGO_JC;Svetlina + Boja (JC)
-TP_COLORAPP_ALGO_JS;Svetlina + Hrominansa (JS)
-TP_COLORAPP_ALGO_QM;Osvetljenost + Živost boja (QM)
-TP_COLORAPP_ALGO_TOOLTIP;Omogućava izbor između podskupa parametara ili svih parametara.
-TP_COLORAPP_BADPIXSL;Filter vrućih/loših piksela
-TP_COLORAPP_BADPIXSL_TOOLTIP;Potiskivanje vrućih/loših (presvetlo obojenih) piksela.\n0 = bez efekta\n1 = medijan\n2 = gauzijan.\n\nOve greške se javljaju usled CIECAM02 ograničenja. Drugi način za izbegavanje grešaka je da podesite sliku tako da izbegnete veoma tamne senke.
-TP_COLORAPP_BRIGHT;Osvetljenost (Q)
-TP_COLORAPP_BRIGHT_TOOLTIP;Osvetljenost u CIECAM02 sistemu uzima u obzir luminansu bele i razlikuje se u odnosu na Lab i RGB osvetljenost.
-TP_COLORAPP_CHROMA;Hroma (C)
-TP_COLORAPP_CHROMA_M;Živost boja (M)
-TP_COLORAPP_CHROMA_M_TOOLTIP;Živost boja u CIECAM02 sistemu se razlikuje u odnosu na Lab i RGB osvetljenost.
-TP_COLORAPP_CHROMA_S;Zasićenost (S)
-TP_COLORAPP_CHROMA_S_TOOLTIP;Zasićenost u CIECAM02 sistemu se razlikuje u odnosu na Lab i RGB osvetljenost.
-TP_COLORAPP_CHROMA_TOOLTIP;Hroma u CIECAM02 sistemu se razlikuje u odnosu na Lab i RGB osvetljenost.
-TP_COLORAPP_CIECAT_DEGREE;prilagođavanje za CAT02
-TP_COLORAPP_CONTRAST;Kontrast (J)
-TP_COLORAPP_CONTRAST_Q;Kontrast (Q)
-TP_COLORAPP_CONTRAST_Q_TOOLTIP;Kontrast u CIECAM02 sistemu za Q klizač; razlikuje se od Lab i RGB kontrasta.
-TP_COLORAPP_CONTRAST_TOOLTIP;Kontrast u CIECAM02 sistemu za J klizač; razlikuje se od Lab i RGB kontrasta.
-TP_COLORAPP_CURVEEDITOR1;Kriva tonova 1
-TP_COLORAPP_CURVEEDITOR1_TOOLTIP;Prikazuje histogram za L (Lab) pre CIECAM02.\nUkoliko je omogućeno „CIECAM02 izlazni histogram u krivuljama“, prikazujer histogram za J ili Q nakon CIECAM02.\n\nJ i Q se ne prikazuju u glavnoj površi histograma.\n\nZa konaačni izla pogledajte glavnu površ histograma.
-TP_COLORAPP_CURVEEDITOR2;Kriva tonova 2
-TP_COLORAPP_CURVEEDITOR2_TOOLTIP;Koristi se na isti način kao i druga kriva tonova ekspozicije.
-TP_COLORAPP_CURVEEDITOR3;Kriva boja
-TP_COLORAPP_CURVEEDITOR3_TOOLTIP;Podešava bilo hromu, zasićenost ili živost boja.\n\nPrikazuje histogram hromatise (Lab) pre CIECAM02.\nUkoliko je omogućeno „CIECAM02 izlazni histogram u krivuljama“, prikazuje histogram za C, s ili M nakon CIECAM02.\n\nC, s i M se ne prikazuju u glavnoj površi za histogram.\nZa konaačni izla pogledajte glavnu površ histograma.
-TP_COLORAPP_DATACIE;CIECAM02 izlazni histogram u krivuljama
-TP_COLORAPP_DATACIE_TOOLTIP;Kada je omogućeno, histogrami u CIECAM02 krivim prikazuju približne vrednosti/opsege za J ili Q, i C, s ili M nakon CIECAM02 podešavanja.\nOvaj izbor ne utiče na prikaz u glavnoj površi za histogram.\n\nKada je isključeno, histogrami u CIECAM02 krivim prikazuju Lab vrednosti pre CIECAM02 podešavanja.
-TP_COLORAPP_GAMUT;Kontrola gamuta (Lab)
-TP_COLORAPP_GAMUT_TOOLTIP;Omogućava kontrolu gamuta u Lab režimu.
-TP_COLORAPP_HUE;Nijansa (h)
-TP_COLORAPP_HUE_TOOLTIP;Nijansa (h) - ugao između 0° i 360°.
-TP_COLORAPP_LABEL;CIECAM 2002 model izgleda boja
-TP_COLORAPP_LABEL_CAM02;Podešavanja slike
-TP_COLORAPP_LABEL_SCENE;Uslovi scene
-TP_COLORAPP_LABEL_VIEWING;Uslovi za pregled
-TP_COLORAPP_LIGHT;Svetlina (J)
-TP_COLORAPP_LIGHT_TOOLTIP;Svetlina u CIECAM02 se razlikuje od Lab ili RGB svetline.
-TP_COLORAPP_MODEL;WP model
-TP_COLORAPP_MODEL_TOOLTIP;Model bele-tačke.\n\nBalans bele [RT] + [izlaz]: balans bele iz programa se koristi za kadar, CIECAM02 se postavlja na D50, a balans bele izlaznog uređaja se određuje iz Podešavanja > Upravljanje bojama.\n\nBalans bele [RT+CAT02] + [izlaz]: podešavanja balansa bele iz programa se koriste od strane CAT02, a balans bele izlaznog uređaja se određuje iz Podešavanja - Upravljanje bojama.
-TP_COLORAPP_RSTPRO;Zaštita crvene i boje kože
-TP_COLORAPP_RSTPRO_TOOLTIP;Zaštita crvene boje i boje kože (klizači i krive).
-TP_COLORAPP_SURROUND;Okruženo
-TP_COLORAPP_SURROUND_AVER;Prosečno
-TP_COLORAPP_SURROUND_DARK;Tamno
-TP_COLORAPP_SURROUND_DIM;Zatamnjeno
-TP_COLORAPP_SURROUND_EXDARK;Jako tamno
-TP_COLORAPP_SURROUND_TOOLTIP;Menja tonove i boje kako bi se prilagodilo uslovima uređaja za prikaz.\n\nProsečno: Prosečno osvetljeno okruženje (uobičajeno). Slika neće biti izmenjena.\n\nZatamnjeno: Zatamnjeno okruženje (TV). Slika će postati za nijansu tamnija.\n\nTamno: Tamno okruženje (projektor). Slika će postati još više tamna.\n\nJako tamno: Ekstramno tamno okruženje (cutsheet). Slika će postati izuzetno tamna.
-TP_COLORAPP_SURSOURCE;Tamno okruženje
-TP_COLORAPP_SURSOURCE_TOOLTIP;Može da se koristi ukoliko slika ima tamne ivice.
-TP_COLORAPP_TCMODE_BRIGHTNESS;Osvtljenost
-TP_COLORAPP_TCMODE_CHROMA;Hroma
-TP_COLORAPP_TCMODE_COLORF;Živost boja
-TP_COLORAPP_TCMODE_LABEL1;Režim krive 1
-TP_COLORAPP_TCMODE_LABEL2;Režim krive 2
-TP_COLORAPP_TCMODE_LABEL3;Kriva u hrom režimu
-TP_COLORAPP_TCMODE_LIGHTNESS;Svetlina
-TP_COLORAPP_TCMODE_SATUR;Zasićenost
-TP_COLORAPP_TONECIE;Mapiranje tonova u CIECAM02
-TP_COLORAPP_TONECIE_TOOLTIP;Ukoliko je isključena ova opcija, mapiranje tonova se vrši u Lab okruženju.\nUkoliko je uključena, mapiranje se vrši pomoću CIECAM02.\nMorate koristiti alat za mapiranje tonova kako bi ova opcija bila primenjena.
-TP_COLORAPP_VIEWING_ABSOLUTELUMINANCE_TOOLTIP;Apsolutna luminoznost okruženja za pregled\n(obično 16cd/m²).
-TP_COLORAPP_WBCAM;Balans bele [RT+CAT02] + [izlaz]
-TP_COLORAPP_WBRT;Balans bele [RT] + [izlaz]
-TP_CROP_FIXRATIO;Srazmerno:
-TP_CROP_GTDIAGONALS;Pravilo dijagonala
-TP_CROP_GTEPASSPORT;Biometrijski pasoš
-TP_CROP_GTFRAME;Okvir
-TP_CROP_GTGRID;Mreža
-TP_CROP_GTNONE;Ništa
-TP_CROP_GTRULETHIRDS;Pravilo trećina
-TP_CROP_GUIDETYPE;Vođice:
-TP_CROP_H;V
-TP_CROP_LABEL;Isecanje
-TP_CROP_W;Š
-TP_CROP_X;x
-TP_CROP_Y;y
-TP_DARKFRAME_AUTOSELECT;Sam izaberi
-TP_DARKFRAME_LABEL;Tamni kadar
-TP_DEFRINGE_LABEL;Uklaljanje oreola
-TP_DEFRINGE_RADIUS;Poluprečnik
-TP_DEFRINGE_THRESHOLD;Prag
-TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Hrominansa: Plava-Žuta
-TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Boja
-TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Hrominansa - crvena-zelena
-TP_DIRPYRDENOISE_ENH;Poboljšani režim
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Povećava kvalitet uklanjanja šuma na uštrb oko 20% vremena za obradu.
-TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Detalji luminanse
-TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminansa
-TP_DIRPYRDENOISE_MAIN_COLORSPACE;Način
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_LABEL;Direkciono piramidno uklanjanje šuma
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;Za rav slike možete koristiti RGB ili Lab režime.\n\nZa ostale slike se koristi Lab, bez obzira na izbor.
-TP_DIRPYRDENOISE_MAIN_GAMMA;Gama
-TP_DIRPYRDENOISE_MAIN_GAMMA_TOOLTIP;Gama utiče na jačinu uklanjanja šuma preko opseg tonova. Manja vrednost će uticati na senke, veća će povećati ovaj efekat i na svetlije tonove.
-TP_DIRPYREQUALIZER_LABEL;Detaljni nivo kontrasta
-TP_DIRPYREQUALIZER_LUMACOARSEST;grubo
-TP_DIRPYREQUALIZER_LUMACONTRAST_MINUS;Kontrast-
-TP_DIRPYREQUALIZER_LUMACONTRAST_PLUS;Kontrast+
-TP_DIRPYREQUALIZER_LUMAFINEST;fino
-TP_DIRPYREQUALIZER_LUMANEUTRAL;Neutralno
-TP_DIRPYREQUALIZER_THRESHOLD;Prag
-TP_DISTORTION_AMOUNT;Količina
-TP_DISTORTION_LABEL;Izobličenja
-TP_EPD_EDGESTOPPING;Izoštravanje ivice
-TP_EPD_LABEL;Mapiranje tonova
-TP_EPD_REWEIGHTINGITERATES;Broj ponovnih merenja
-TP_EPD_SCALE;Razmera
-TP_EPD_STRENGTH;Jačina
-TP_EXPOSURE_AUTOLEVELS;Auto-nivoi
-TP_EXPOSURE_AUTOLEVELS_TIP;Omogućava automatsko određivanje nivoa, koji podešava klizače ekspozicije na osnovu podatka o samoj slici.\nUključuje čupanje svetlih delova ukoliko je neophodno.
-TP_EXPOSURE_BLACKLEVEL;Crna
-TP_EXPOSURE_BRIGHTNESS;Osvetljenost
-TP_EXPOSURE_CLIP;Odseci
-TP_EXPOSURE_CLIP_TIP;Deo piksela koje će biti odsečeni primenom automatskih nivoa.
-TP_EXPOSURE_COMPRHIGHLIGHTS;Sabijanje svetlog
-TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Prag za čupanje svetlih delova
-TP_EXPOSURE_COMPRSHADOWS;Sabijanje senki
-TP_EXPOSURE_CONTRAST;Kontrast
-TP_EXPOSURE_CURVEEDITOR;Kriva nijansi
-TP_EXPOSURE_CURVEEDITOR1;Kriva tonova 1
-TP_EXPOSURE_CURVEEDITOR2;Kriva tonova 2
-TP_EXPOSURE_CURVEEDITOR2_TOOLTIP;Pogledajte „Ekspozicija > Krive tonova“ unutar članka na sajtu RawPedia kako bi naučili kako se postižu najbolji rezučtati uspotrebom dve krive tonova.
-TP_EXPOSURE_EXPCOMP;Kompenzacija
-TP_EXPOSURE_LABEL;Ekspozicija
-TP_EXPOSURE_SATURATION;Zasićenost
-TP_EXPOSURE_TCMODE_FILMLIKE;Nalik foto-filmu
-TP_EXPOSURE_TCMODE_LABEL1;1. režim krive
-TP_EXPOSURE_TCMODE_LABEL2;2. režim krive
-TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Utapanje zasićenosti i vrednosti
-TP_EXPOSURE_TCMODE_STANDARD;Standard
-TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Uravnoteženi standard
-TP_FLATFIELD_AUTOSELECT;Sam izaberi
-TP_FLATFIELD_BLURRADIUS;Poluprečnik zamućenja
-TP_FLATFIELD_BLURTYPE;Zamuti
-TP_FLATFIELD_BT_AREA;Oblast
-TP_FLATFIELD_BT_HORIZONTAL;Horizontalno
-TP_FLATFIELD_BT_VERTHORIZ;Horiz. i vertik.
-TP_FLATFIELD_BT_VERTICAL;Vertikalno
-TP_FLATFIELD_LABEL;Ravno polje
-TP_GAMMA_CURV;Gama
-TP_GAMMA_FREE;Gama sloboda
-TP_GAMMA_OUTPUT;Izlazna gama
-TP_GAMMA_SLOP;nagib (linearni)
-TP_GENERAL_11SCALE_TOOLTIP;Efekt ovog alata ili njegovih opcija se vidi samo u razmeri 1:1.
-TP_GRADIENT_CENTER;Centar
-TP_GRADIENT_CENTER_X;Centar X
-TP_GRADIENT_CENTER_X_TOOLTIP;Pomera gradijent ulevo (negativne vrednosti) ili udesno (pozitivne vrednosti).
-TP_GRADIENT_CENTER_Y;Centar Y
-TP_GRADIENT_CENTER_Y_TOOLTIP;Pomera gradijent na gore (negativne vrednosti) ili na dole (pozitivne vrednosti).
-TP_GRADIENT_DEGREE;Ugao
-TP_GRADIENT_DEGREE_TOOLTIP;Okreće ugao gradijenta za odabrani broj stepeni.
-TP_GRADIENT_FEATHER;Umekšavanje
-TP_GRADIENT_FEATHER_TOOLTIP;Širina gradijenta u procentima dijagonale slike.
-TP_GRADIENT_LABEL;Filter gradijenta
-TP_GRADIENT_STRENGTH;Jačina
-TP_GRADIENT_STRENGTH_TOOLTIP;Jačina filtera u broju tačaka prekida.
-TP_HLREC_BLEND;Utapanje
-TP_HLREC_CIELAB;CieLab stapanje
-TP_HLREC_COLOR;Propaginacija boje
-TP_HLREC_ENA_TOOLTIP;Može se aktivirati opcijom „Auto-nivoi“.
-TP_HLREC_LABEL;Čupanje svetlih delova
-TP_HLREC_LUMINANCE;Izvlačenje luminanse
-TP_HLREC_METHOD;Način:
-TP_HSVEQUALIZER_CHANNEL;HSV kanal
-TP_HSVEQUALIZER_HUE;Nijansa
-TP_HSVEQUALIZER_LABEL;Ujednačenje HSV kanala
-TP_HSVEQUALIZER_SAT;Zasićenost
-TP_HSVEQUALIZER_VAL;Vrednost
-TP_ICM_BLENDCMSMATRIX;Utopi svetle delove u matricu
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Omogućite kako bi povratili preosvetljene delove ukoliko koristite LUT ICC profile.
-TP_ICM_DCPILLUMINANT;Iluminantno
-TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolirano
-TP_ICM_INPUTCAMERA;Podrazumevano iz aparata
-TP_ICM_INPUTCAMERAICC;Foto-aparat ili standardni ICC
-TP_ICM_INPUTCAMERA_TOOLTIP;Koristi prostu matricu boja iz programa dcraw, unapređenu RawTherapee verziju (koja god da je dostupna za vaš model foto-aparata) ili neki od ugrađenih DNG profila.
-TP_ICM_INPUTCUSTOM;Proizvoljno
-TP_ICM_INPUTCUSTOM_TOOLTIP;Izaberite željeni DCP/ICC profil boja za foto-aparat.
-TP_ICM_INPUTDLGLABEL;Izaberite ulazni ICC profil...
-TP_ICM_INPUTEMBEDDED;Ugnježđeno, ukoliko je moguće
-TP_ICM_INPUTEMBEDDED_TOOLTIP;Koristi profil boja koji je ugrađen u ne-raw datoteke.
-TP_ICM_INPUTNONE;Nema profila
-TP_ICM_INPUTNONE_TOOLTIP;Uopšte ne koristi ulazni profil boja.\nPrimenjuje se samo u posebnim okolnostima.
-TP_ICM_INPUTPROFILE;Ulazni profil
-TP_ICM_LABEL;ICM
-TP_ICM_NOICM;No ICM: sRGB izlaz
-TP_ICM_OUTPUTPROFILE;Izlazni profil
-TP_ICM_SAVEREFERENCE_TOOLTIP;Sačuvaj linearnu TIFF sliku pre primene ulaznog profila. Rezultat može da se koristi za kalibraciju i izradu profila foto-aparata.
-TP_ICM_TONECURVE;Koristi DCP krivu tonova
-TP_ICM_TONECURVE_TOOLTIP;Upotrebljava ugrađenu DCP krivu tonova. Ovo podešavanje je omogućeno samo ako izabrani DCP ima krivu tonova.
-TP_ICM_WORKINGPROFILE;Radni profil
-TP_IMPULSEDENOISE_LABEL;Impulsno uklanjanje šuma
-TP_IMPULSEDENOISE_THRESH;Prag
-TP_LABCURVE_AVOIDCOLORSHIFT;Izbegni pomeranje boja
-TP_LABCURVE_AVOIDCOLORSHIFT_TOOLTIP;Postavlja boje u opseg trenutnog radnog prostora boja i primenjuje Munselovu korekciju.
-TP_LABCURVE_BRIGHTNESS;Osvetljenost
-TP_LABCURVE_CHROMATICITY;Boje
-TP_LABCURVE_CHROMA_TOOLTIP;To apply CB toning, set Chromaticity to -100.
-TP_LABCURVE_CONTRAST;Kontrast
-TP_LABCURVE_CURVEEDITOR;Kriva svetlosti
-TP_LABCURVE_CURVEEDITOR_A_RANGE1;Zasićena zelena
-TP_LABCURVE_CURVEEDITOR_A_RANGE2;Pastelna zelena
-TP_LABCURVE_CURVEEDITOR_A_RANGE3;Pastelna crvena
-TP_LABCURVE_CURVEEDITOR_A_RANGE4;Zasićena crvena
-TP_LABCURVE_CURVEEDITOR_B_RANGE1;Zasićena plava
-TP_LABCURVE_CURVEEDITOR_B_RANGE2;Pastelna plava
-TP_LABCURVE_CURVEEDITOR_B_RANGE3;Pastelna žuta
-TP_LABCURVE_CURVEEDITOR_B_RANGE4;Zasićena žuta
-TP_LABCURVE_CURVEEDITOR_CC;CC
-TP_LABCURVE_CURVEEDITOR_CC_RANGE1;Neutralno
-TP_LABCURVE_CURVEEDITOR_CC_RANGE2;Isprano
-TP_LABCURVE_CURVEEDITOR_CC_RANGE3;Pastelno
-TP_LABCURVE_CURVEEDITOR_CC_RANGE4;Zasićeno
-TP_LABCURVE_CURVEEDITOR_CC_TOOLTIP;Boja kao funkcija boje C=f(C)
-TP_LABCURVE_CURVEEDITOR_CH;CH
-TP_LABCURVE_CURVEEDITOR_CH_TOOLTIP;Boja kao funkcija nijanse C=f(H)
-TP_LABCURVE_CURVEEDITOR_CL;CL
-TP_LABCURVE_CURVEEDITOR_CL_TOOLTIP;Hrominansa na osnovu luminanse C=f(L)
-TP_LABCURVE_CURVEEDITOR_HH;HH
-TP_LABCURVE_CURVEEDITOR_HH_TOOLTIP;Nijansa kao funkcija nijanse H=f(H)
-TP_LABCURVE_CURVEEDITOR_LC;LC
-TP_LABCURVE_CURVEEDITOR_LC_TOOLTIP;Svetnost kao funkcija boje L=f(C)
-TP_LABCURVE_CURVEEDITOR_LH;LH
-TP_LABCURVE_CURVEEDITOR_LH_TOOLTIP;Svetlost kao funkcija nijanse L=f(H)
-TP_LABCURVE_CURVEEDITOR_LL_TOOLTIP;Svetlost kao funkcija svetlosti L=f(L)
-TP_LABCURVE_LABEL;Lab kriva
-TP_LABCURVE_LCREDSK;Ograniči LC na crvenu i boju kože
-TP_LABCURVE_LCREDSK_TIP;Ukoliko je uključeno, LC kriva će uticati samo na crvenu i boju kože.\nU suprotnom se primenjuje na sve tonove.
-TP_LABCURVE_RSTPROTECTION;Zaštita crvene i boje kože
-TP_LABCURVE_RSTPRO_TOOLTIP;Može se koristiti sa klizačem za Hrominansu i CC krivom.
-TP_LENSGEOM_AUTOCROP;Sam iseci
-TP_LENSGEOM_FILL;Sam popuni
-TP_LENSGEOM_LABEL;Objektiv i geometrija
-TP_LENSPROFILE_LABEL;Profili za ispravljanje izobličenja objektiva
-TP_NEUTRAL;Neutralno
-TP_NEUTRAL_TIP;Vraća klizače ekspozicije na neutralne vrednosti.\nPrimenjuje se na iste kontrole kao u Auto nivoi, bez obzira na to da li ste koristili Auto nivoe ili ne.
-TP_PCVIGNETTE_FEATHER;Umekšavanje
-TP_PCVIGNETTE_FEATHER_TOOLTIP;Umekšavanje:\n0 = samo uglove,\n50 = na polovinu od centra,\n100 = centar.
-TP_PCVIGNETTE_LABEL;Filter vinjetarenja
-TP_PCVIGNETTE_ROUNDNESS;Zaokrugljenost
-TP_PCVIGNETTE_ROUNDNESS_TOOLTIP;Zaokrugljenost:\n0 = kvadrat,\n50 = prelaz od kvadrata ka krugu,\n100 = krug.
-TP_PCVIGNETTE_STRENGTH;Jačina
-TP_PCVIGNETTE_STRENGTH_TOOLTIP;Jačina filtera u prekidima (koji se dostižu na uglovima).
-TP_PERSPECTIVE_HORIZONTAL;Horizontalna
-TP_PERSPECTIVE_LABEL;Perspektiva
-TP_PERSPECTIVE_VERTICAL;Vertikalna
-TP_PFCURVE_CURVEEDITOR_CH;Nijansa
-TP_PFCURVE_CURVEEDITOR_CH_TOOLTIP;Određuje jačinu uklaljanja boje.\nVišlje = više,\nNiže = manje.
-TP_PREPROCESS_GREENEQUIL;Kalibracija zelene boje
-TP_PREPROCESS_LABEL;Predobrada
-TP_PREPROCESS_LINEDENOISE;Linijski filter šuma
-TP_PREPROCESS_NO_FOUND;Nije pronađeno
-TP_RAWCACORR_AUTO;Ispravi hromatske aberacije
-TP_RAWCACORR_CABLUE;Plava
-TP_RAWCACORR_CARED;Crvena
-TP_RAWEXPOS_BLACKS;Nivo crne
-TP_RAWEXPOS_LINEAR;Linearni faktor korekcije
-TP_RAWEXPOS_TWOGREEN;Obe zelene
-TP_RAW_DCBENHANCE;Primeni DCB poboljšanje
-TP_RAW_DCBITERATIONS;Broj DCB prolaza
-TP_RAW_DMETHOD;Način
-TP_RAW_DMETHOD_PROGRESSBAR;%1 rasklapam mozaik...
-TP_RAW_DMETHOD_PROGRESSBAR_REFINE;Poboljšavam mozaik...
-TP_RAW_DMETHOD_TOOLTIP;Primedba: IGV i LMMSE služe kod velikih ISO vrednosti slike i služe za ispomoć pri uklanjanje šuma kako ne bi došlo do efekta posterizacije ili ispranog izlgeda.
-TP_RAW_FALSECOLOR;Koraci za prigušivanje lažne boje
-TP_RAW_LABEL;Rasklapanje mozaika
-TP_RAW_LMMSEITERATIONS;Koraci LMMSE poboljšanja
-TP_RAW_LMMSE_TOOLTIP;Dodaje gamu (korak 1), medijan (koraci 2-4) i poboljšanja (koraci 5-6) kako bi smanjio neispravnosti i poboljšao odnos signal-prema-šum.
-TP_RESIZE_APPLIESTO;Primeni na:
-TP_RESIZE_CROPPEDAREA;Isečenu oblast
-TP_RESIZE_FITBOX;Širinu i visinu
-TP_RESIZE_FULLIMAGE;Celu sliku
-TP_RESIZE_H;V:
-TP_RESIZE_HEIGHT;Visinu
-TP_RESIZE_LABEL;Veličina slike
-TP_RESIZE_LANCZOS;Lanhoz
-TP_RESIZE_METHOD;Način:
-TP_RESIZE_NEAREST;Najbliže
-TP_RESIZE_SCALE;Umanjenje
-TP_RESIZE_SPECIFY;Izaberi:
-TP_RESIZE_W;Š:
-TP_RESIZE_WIDTH;Širinu
-TP_RGBCURVES_BLUE;P
-TP_RGBCURVES_CHANNEL;Kanal
-TP_RGBCURVES_GREEN;Z
-TP_RGBCURVES_LABEL;RGB krive
-TP_RGBCURVES_LUMAMODE;Režim luminanse
-TP_RGBCURVES_LUMAMODE_TOOLTIP;Režim liminanse omogućava da menjate udeo crvenog, zelenog i plavog kanala iz luminanse slike što ne utiče na promenu boje fotografije.
-TP_RGBCURVES_RED;C
-TP_ROTATE_DEGREE;Stepeni:
-TP_ROTATE_LABEL;Rotacija
-TP_ROTATE_SELECTLINE; Postavi pravu liniju
-TP_SAVEDIALOG_OK_TIP;Prečica: Ctrl-Enter
-TP_SHADOWSHLIGHTS_HIGHLIGHTS;Svetlo
-TP_SHADOWSHLIGHTS_HLTONALW;Širina tonova
-TP_SHADOWSHLIGHTS_LABEL;Senke/Svetlo
-TP_SHADOWSHLIGHTS_LOCALCONTR;Lokalni kontrast
-TP_SHADOWSHLIGHTS_RADIUS;Poluprečnik
-TP_SHADOWSHLIGHTS_SHADOWS;Senke
-TP_SHADOWSHLIGHTS_SHARPMASK;Oštra maska
-TP_SHADOWSHLIGHTS_SHTONALW;Širina tonova
-TP_SHARPENEDGE_AMOUNT;Količina
-TP_SHARPENEDGE_LABEL;Ivice
-TP_SHARPENEDGE_PASSES;Ponavljanja
-TP_SHARPENEDGE_THREE;Samo luminansa
-TP_SHARPENING_AMOUNT;Količina
-TP_SHARPENING_EDRADIUS;Poluprečnik
-TP_SHARPENING_EDTOLERANCE;Tolerancija ivice
-TP_SHARPENING_HALOCONTROL;Ukloni oreol
-TP_SHARPENING_HCAMOUNT;Količina
-TP_SHARPENING_LABEL;Oštrenje
-TP_SHARPENING_METHOD;Način
-TP_SHARPENING_ONLYEDGES;Izoštri samo ivice
-TP_SHARPENING_RADIUS;Poluprečnik
-TP_SHARPENING_RLD;RL dekonvolucija
-TP_SHARPENING_RLD_AMOUNT;Količina
-TP_SHARPENING_RLD_DAMPING;Prigušivanje
-TP_SHARPENING_RLD_ITERATIONS;Ponavljanja
-TP_SHARPENING_THRESHOLD;Prag
-TP_SHARPENING_USM;Oštrina maske
-TP_SHARPENMICRO_AMOUNT;Količina
-TP_SHARPENMICRO_LABEL;Mikrokonttrast
-TP_SHARPENMICRO_MATRIX;3×3 matrica umesto 5×5
-TP_SHARPENMICRO_UNIFORMITY;Ujednačenost
-TP_VIBRANCE_AVOIDCOLORSHIFT;Izbegni pomeranje boja
-TP_VIBRANCE_CURVEEDITOR_SKINTONES;HH
-TP_VIBRANCE_CURVEEDITOR_SKINTONES_LABEL;Boja kože
-TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE1;Crvena/ljubičasta
-TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE2;Crvena
-TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE3;Crvena/žuta
-TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE4;Žuta
-TP_VIBRANCE_CURVEEDITOR_SKINTONES_TOOLTIP;Nijansa na osnovu HUE H=f(H)
-TP_VIBRANCE_LABEL;Živost boja
-TP_VIBRANCE_PASTELS;Pastelne boje
-TP_VIBRANCE_PASTSATTOG;Poveži zasićene i pastelne boje
-TP_VIBRANCE_PROTECTSKINS;Očuvaj boju kože
-TP_VIBRANCE_PSTHRESHOLD;Prag za pastelne/zasićene boje
-TP_VIBRANCE_PSTHRESHOLD_SATTHRESH;Prag za zasićene boje
-TP_VIBRANCE_PSTHRESHOLD_TOOLTIP;Vertikalna osa sadrži pastelne tonove pri dnu i zasićene tonove na vrhu.\nHorizontalna osa predstavlja opseg zasićenja.
-TP_VIBRANCE_PSTHRESHOLD_WEIGTHING;Težina prelaza pastelnih/zasićenih boja
-TP_VIBRANCE_SATURATED;Zasićene boje
-TP_VIGNETTING_AMOUNT;Količina
-TP_VIGNETTING_CENTER;Centar
-TP_VIGNETTING_CENTER_X;Centar X
-TP_VIGNETTING_CENTER_Y;Centar Y
-TP_VIGNETTING_LABEL;Vinjetarenje
-TP_VIGNETTING_RADIUS;Poluprečnik
-TP_VIGNETTING_STRENGTH;Jačina
-TP_WBALANCE_AUTO;Sam odredi
-TP_WBALANCE_CAMERA;Iz aparata
-TP_WBALANCE_CLOUDY;Oblačno vreme
-TP_WBALANCE_CUSTOM;Proizvoljno
-TP_WBALANCE_DAYLIGHT;Dnevno svetlo (sunčano)
-TP_WBALANCE_EQBLUERED;Balans crvene i plave
-TP_WBALANCE_EQBLUERED_TOOLTIP;Dozvoljava nestandardno podešavanje balansa bele pomoću balansa plave i crvene boje.\nOvo je korisno kada:\na) slikate u nestandardnim uslovima svetla (npr. pod vodom),\nb) su uslovi daleko drugačiji od onih u kojima je izvršena kalibracija,\nv) su matrice ili ICC profili neodgovarajući.
-TP_WBALANCE_FLASH55;Leika
-TP_WBALANCE_FLASH60;Standardni, Kenon, Pentaks, Olimpus
-TP_WBALANCE_FLASH65;Nikon, Panasonik, Soni, Minolta
-TP_WBALANCE_FLASH_HEADER;Blic
-TP_WBALANCE_FLUO1;F1 - Dnevno svetlo
-TP_WBALANCE_FLUO2;F2 - Hladno svetlo
-TP_WBALANCE_FLUO3;F3 - Belo svetlo
-TP_WBALANCE_FLUO4;F4 - Toplo-belo svetlo
-TP_WBALANCE_FLUO5;F5 - Dnevno svetlo
-TP_WBALANCE_FLUO6;F6 - Svetlo-belo svetlo
-TP_WBALANCE_FLUO7;F7 - D65 simulator dnevne svetlosti
-TP_WBALANCE_FLUO8;F8 - D50 / Silvanija F40 dizajn
-TP_WBALANCE_FLUO9;F9 - Hladna, deluks-bela
-TP_WBALANCE_FLUO10;F10 - Filips TL85
-TP_WBALANCE_FLUO11;F11 - Filips TL84
-TP_WBALANCE_FLUO12;F12 - Filips TL83
-TP_WBALANCE_FLUO_HEADER;Neonsko svetlo
-TP_WBALANCE_GREEN;Zelenilo
-TP_WBALANCE_GTI;GeTeI
-TP_WBALANCE_HMI;HaEmI
-TP_WBALANCE_JUDGEIII;DžudIII
-TP_WBALANCE_LABEL;Balans bele
-TP_WBALANCE_LAMP_HEADER;Lampa
-TP_WBALANCE_LED_CRS;CRS SP12 WWMR16
-TP_WBALANCE_LED_HEADER;LED osvetljenje
-TP_WBALANCE_LED_LSI;LSI Lumeleks 2040
-TP_WBALANCE_METHOD;Način:
-TP_WBALANCE_SHADE;U senci
-TP_WBALANCE_SIZE;Veličina:
-TP_WBALANCE_SOLUX35;Soluks 3500K
-TP_WBALANCE_SOLUX41;Soluks 4100K
-TP_WBALANCE_SOLUX47;Soluks 4700K (proizvođač)
-TP_WBALANCE_SOLUX47_NG;Soluks 4700K (Nac. galerija)
-TP_WBALANCE_SPOTWB;Iz tačke
-TP_WBALANCE_TEMPERATURE;Temperatura
-TP_WBALANCE_TUNGSTEN;Obična sijalica
-TP_WBALANCE_WATER1;Podvodna fotografija 1
-TP_WBALANCE_WATER2;Podvodna fotografija 2
-TP_WBALANCE_WATER_HEADER;Podvodna fotografija
-ZOOMPANEL_100;(100%)
-ZOOMPANEL_NEWCROPWINDOW;Otvara novi prozor sa detaljima
-ZOOMPANEL_ZOOM100;Povećava pregled na 100% z
-ZOOMPANEL_ZOOMFITSCREEN;Uklapa sliku u veličinu prozora Alt-f
-ZOOMPANEL_ZOOMIN;Uvećava prikaz slike +
-ZOOMPANEL_ZOOMOUT;Umanjuje prikaz slike -
-
-!!!!!!!!!!!!!!!!!!!!!!!!!
-! Untranslated keys follow; remove the ! prefix after an entry is translated.
-!!!!!!!!!!!!!!!!!!!!!!!!!
-
-!ADJUSTER_RESET_TO_DEFAULT;Click - reset to default value.\nCtrl+click - reset to initial value.
-!BATCHQUEUE_STARTSTOPHINT;Start or stop processing the images in the queue.\n\nShortcut: Ctrl+s
-!CURVEEDITOR_AXIS_IN;I:
-!CURVEEDITOR_AXIS_LEFT_TAN;LT:
-!CURVEEDITOR_AXIS_OUT;O:
-!CURVEEDITOR_AXIS_RIGHT_TAN;RT:
-!CURVEEDITOR_CATMULLROM;Flexible
-!CURVEEDITOR_EDITPOINT_HINT;Enable edition of node in/out values.\n\nRight-click on a node to select it.\nRight-click on empty space to de-select the node.
-!DIRBROWSER_FOLDERS;Folders
-!DONT_SHOW_AGAIN;Don't show this message again.
-!DYNPROFILEEDITOR_DELETE;Delete
-!DYNPROFILEEDITOR_EDIT;Edit
-!DYNPROFILEEDITOR_EDIT_RULE;Edit Dynamic Profile Rule
-!DYNPROFILEEDITOR_ENTRY_TOOLTIP;The matching is case insensitive.\nUse the "re:" prefix to enter\na regular expression.
-!DYNPROFILEEDITOR_IMGTYPE_ANY;Any
-!DYNPROFILEEDITOR_IMGTYPE_HDR;HDR
-!DYNPROFILEEDITOR_IMGTYPE_PS;Pixel Shift
-!DYNPROFILEEDITOR_IMGTYPE_STD;Standard
-!DYNPROFILEEDITOR_MOVE_DOWN;Move Down
-!DYNPROFILEEDITOR_MOVE_UP;Move Up
-!DYNPROFILEEDITOR_NEW;New
-!DYNPROFILEEDITOR_NEW_RULE;New Dynamic Profile Rule
-!DYNPROFILEEDITOR_PROFILE;Processing Profile
-!EDIT_OBJECT_TOOLTIP;Displays a widget on the preview window which lets you adjust this tool.
-!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
-!EXIFFILTER_IMAGETYPE;Image type
-!EXIFPANEL_SHOWALL;Show all
-!EXPORT_BYPASS;Processing steps to bypass
-!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
-!EXPORT_PIPELINE;Processing pipeline
-!EXPORT_USE_FAST_PIPELINE;Dedicated (full processing on resized image)
-!EXPORT_USE_FAST_PIPELINE_TIP;Use a dedicated processing pipeline for images in Fast Export mode, that trades speed for quality. Resizing of the image is done as early as possible, instead of doing it at the end like in the normal pipeline. The speedup can be significant, but be prepared to see artifacts and a general degradation of output quality.
-!EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
-!FILEBROWSER_BROWSEPATHBUTTONHINT;Click to open specified path, reload folder and apply "find" keywords.
-!FILEBROWSER_CACHECLEARFROMFULL;Clear all including cached profiles
-!FILEBROWSER_CACHECLEARFROMPARTIAL;Clear all except cached profiles
-!FILEBROWSER_POPUPCOLORLABEL0;Label: None
-!FILEBROWSER_POPUPCOLORLABEL1;Label: Red
-!FILEBROWSER_POPUPCOLORLABEL2;Label: Yellow
-!FILEBROWSER_POPUPCOLORLABEL3;Label: Green
-!FILEBROWSER_POPUPCOLORLABEL4;Label: Blue
-!FILEBROWSER_POPUPCOLORLABEL5;Label: Purple
-!FILEBROWSER_POPUPOPENINEDITOR;Open in Editor
-!FILEBROWSER_POPUPRANK0;Unrank
-!FILEBROWSER_POPUPRANK1;Rank 1 *
-!FILEBROWSER_POPUPRANK2;Rank 2 **
-!FILEBROWSER_POPUPRANK3;Rank 3 ***
-!FILEBROWSER_POPUPRANK4;Rank 4 ****
-!FILEBROWSER_POPUPRANK5;Rank 5 *****
-!FILEBROWSER_RESETDEFAULTPROFILE;Reset to default
-!FILEBROWSER_SHOWNOTTRASHHINT;Show only non-deleted images.
-!FILEBROWSER_SHOWORIGINALHINT;Show only original images.\n\nWhen several images exist with the same filename but different extensions, the one considered original is the one whose extension is nearest the top of the parsed extensions list in Preferences > File Browser > Parsed Extensions.
-!FILECHOOSER_FILTER_ANY;All files
-!FILECHOOSER_FILTER_COLPROF;Color profiles (*.icc)
-!FILECHOOSER_FILTER_CURVE;Curve files
-!FILECHOOSER_FILTER_LCP;Lens correction profiles
-!FILECHOOSER_FILTER_PP;Processing profiles
-!FILECHOOSER_FILTER_SAME;Same format as current photo
-!FILECHOOSER_FILTER_TIFF;TIFF files
-!GENERAL_APPLY;Apply
-!GENERAL_ASIMAGE;As Image
-!GENERAL_CURRENT;Current
-!GENERAL_OPEN;Open
-!GENERAL_RESET;Reset
-!GENERAL_SAVE_AS;Save as...
-!GENERAL_SLIDER;Slider
-!GIMP_PLUGIN_INFO;Welcome to the RawTherapee GIMP plugin!\nOnce you are done editing, simply close the main RawTherapee window and the image will be automatically imported in GIMP.
-!HISTOGRAM_TOOLTIP_MODE;Toggle between linear, log-linear and log-log scaling of the histogram.
-!HISTORY_MSG_173;NR - Detail recovery
-!HISTORY_MSG_203;NR - Color space
-!HISTORY_MSG_235;B&W - CM - Auto
-!HISTORY_MSG_237;B&W - CM
-!HISTORY_MSG_252;CbDL - Skin tar/prot
-!HISTORY_MSG_253;CbDL - Reduce artifacts
-!HISTORY_MSG_254;CbDL - Skin hue
-!HISTORY_MSG_255;NR - Median filter
-!HISTORY_MSG_256;NR - Median - Type
-!HISTORY_MSG_257;Color Toning
-!HISTORY_MSG_258;CT - Color curve
-!HISTORY_MSG_259;CT - Opacity curve
-!HISTORY_MSG_260;CT - a*[b*] opacity
-!HISTORY_MSG_261;CT - Method
-!HISTORY_MSG_262;CT - b* opacity
-!HISTORY_MSG_263;CT - Shadows - Red
-!HISTORY_MSG_264;CT - Shadows - Green
-!HISTORY_MSG_265;CT - Shadows - Blue
-!HISTORY_MSG_266;CT - Mid - Red
-!HISTORY_MSG_267;CT - Mid - Green
-!HISTORY_MSG_268;CT - Mid - Blue
-!HISTORY_MSG_269;CT - High - Red
-!HISTORY_MSG_270;CT - High - Green
-!HISTORY_MSG_271;CT - High - Blue
-!HISTORY_MSG_272;CT - Balance
-!HISTORY_MSG_273;CT - Color Balance SMH
-!HISTORY_MSG_274;CT - Sat. Shadows
-!HISTORY_MSG_275;CT - Sat. Highlights
-!HISTORY_MSG_276;CT - Opacity
-!HISTORY_MSG_277;--unused--
-!HISTORY_MSG_278;CT - Preserve luminance
-!HISTORY_MSG_279;CT - Shadows
-!HISTORY_MSG_280;CT - Highlights
-!HISTORY_MSG_281;CT - Sat. strength
-!HISTORY_MSG_282;CT - Sat. threshold
-!HISTORY_MSG_283;CT - Strength
-!HISTORY_MSG_284;CT - Auto sat. protection
-!HISTORY_MSG_285;NR - Median - Method
-!HISTORY_MSG_286;NR - Median - Type
-!HISTORY_MSG_287;NR - Median - Iterations
-!HISTORY_MSG_288;Flat-Field - Clip control
-!HISTORY_MSG_289;Flat-Field - Clip control - Auto
-!HISTORY_MSG_290;Black Level - Red
-!HISTORY_MSG_291;Black Level - Green
-!HISTORY_MSG_292;Black Level - Blue
-!HISTORY_MSG_293;Film Simulation
-!HISTORY_MSG_294;Film Simulation - Strength
-!HISTORY_MSG_295;Film Simulation - Film
-!HISTORY_MSG_296;NR - Luminance curve
-!HISTORY_MSG_297;NR - Mode
-!HISTORY_MSG_298;Dead pixel filter
-!HISTORY_MSG_299;NR - Chrominance curve
-!HISTORY_MSG_300;-
-!HISTORY_MSG_301;NR - Luma control
-!HISTORY_MSG_302;NR - Chroma method
-!HISTORY_MSG_303;NR - Chroma method
-!HISTORY_MSG_304;W - Contrast levels
-!HISTORY_MSG_305;Wavelet Levels
-!HISTORY_MSG_306;W - Process
-!HISTORY_MSG_307;W - Process
-!HISTORY_MSG_308;W - Process direction
-!HISTORY_MSG_309;W - ES - Detail
-!HISTORY_MSG_310;W - Residual - Sky tar/prot
-!HISTORY_MSG_311;W - Wavelet levels
-!HISTORY_MSG_312;W - Residual - Shadows threshold
-!HISTORY_MSG_313;W - Chroma - Sat/past
-!HISTORY_MSG_314;W - Gamut - Reduce artifacts
-!HISTORY_MSG_315;W - Residual - Contrast
-!HISTORY_MSG_316;W - Gamut - Skin tar/prot
-!HISTORY_MSG_317;W - Gamut - Skin hue
-!HISTORY_MSG_318;W - Contrast - Highlight levels
-!HISTORY_MSG_319;W - Contrast - Highlight range
-!HISTORY_MSG_320;W - Contrast - Shadow range
-!HISTORY_MSG_321;W - Contrast - Shadow levels
-!HISTORY_MSG_322;W - Gamut - Avoid color shift
-!HISTORY_MSG_323;W - ES - Local contrast
-!HISTORY_MSG_324;W - Chroma - Pastel
-!HISTORY_MSG_325;W - Chroma - Saturated
-!HISTORY_MSG_326;W - Chroma - Method
-!HISTORY_MSG_327;W - Contrast - Apply to
-!HISTORY_MSG_328;W - Chroma - Link strength
-!HISTORY_MSG_329;W - Toning - Opacity RG
-!HISTORY_MSG_330;W - Toning - Opacity BY
-!HISTORY_MSG_331;W - Contrast levels - Extra
-!HISTORY_MSG_332;W - Tiling method
-!HISTORY_MSG_333;W - Residual - Shadows
-!HISTORY_MSG_334;W - Residual - Chroma
-!HISTORY_MSG_335;W - Residual - Highlights
-!HISTORY_MSG_336;W - Residual - Highlights threshold
-!HISTORY_MSG_337;W - Residual - Sky hue
-!HISTORY_MSG_338;W - ES - Radius
-!HISTORY_MSG_339;W - ES - Strength
-!HISTORY_MSG_340;W - Strength
-!HISTORY_MSG_341;W - Edge performance
-!HISTORY_MSG_342;W - ES - First level
-!HISTORY_MSG_343;W - Chroma levels
-!HISTORY_MSG_344;W - Meth chroma sl/cur
-!HISTORY_MSG_345;W - ES - Local contrast
-!HISTORY_MSG_346;W - ES - Local contrast method
-!HISTORY_MSG_347;W - Denoise - Level 1
-!HISTORY_MSG_348;W - Denoise - Level 2
-!HISTORY_MSG_349;W - Denoise - Level 3
-!HISTORY_MSG_350;W - ES - Edge detection
-!HISTORY_MSG_351;W - Residual - HH curve
-!HISTORY_MSG_352;W - Background
-!HISTORY_MSG_353;W - ES - Gradient sensitivity
-!HISTORY_MSG_354;W - ES - Enhanced
-!HISTORY_MSG_355;W - ES - Threshold low
-!HISTORY_MSG_356;W - ES - Threshold high
-!HISTORY_MSG_357;W - Denoise - Link with ES
-!HISTORY_MSG_358;W - Gamut - CH
-!HISTORY_MSG_359;Hot/Dead - Threshold
-!HISTORY_MSG_360;TM - Gamma
-!HISTORY_MSG_361;W - Final - Chroma balance
-!HISTORY_MSG_362;W - Residual - Compression method
-!HISTORY_MSG_363;W - Residual - Compression strength
-!HISTORY_MSG_364;W - Final - Contrast balance
-!HISTORY_MSG_365;W - Final - Delta balance
-!HISTORY_MSG_366;W - Residual - Compression gamma
-!HISTORY_MSG_367;W - Final - 'After' contrast curve
-!HISTORY_MSG_368;W - Final - Contrast balance
-!HISTORY_MSG_369;W - Final - Balance method
-!HISTORY_MSG_370;W - Final - Local contrast curve
-!HISTORY_MSG_371;Post-Resize Sharpening
-!HISTORY_MSG_372;PRS USM - Radius
-!HISTORY_MSG_373;PRS USM - Amount
-!HISTORY_MSG_374;PRS USM - Threshold
-!HISTORY_MSG_375;PRS USM - Sharpen only edges
-!HISTORY_MSG_376;PRS USM - Edge detection radius
-!HISTORY_MSG_377;PRS USM - Edge tolerance
-!HISTORY_MSG_378;PRS USM - Halo control
-!HISTORY_MSG_379;PRS USM - Halo control amount
-!HISTORY_MSG_380;PRS - Method
-!HISTORY_MSG_381;PRS RLD - Radius
-!HISTORY_MSG_382;PRS RLD - Amount
-!HISTORY_MSG_383;PRS RLD - Damping
-!HISTORY_MSG_384;PRS RLD - Iterations
-!HISTORY_MSG_385;W - Residual - Color Balance
-!HISTORY_MSG_386;W - Residual - CB green high
-!HISTORY_MSG_387;W - Residual - CB blue high
-!HISTORY_MSG_388;W - Residual - CB green mid
-!HISTORY_MSG_389;W - Residual - CB blue mid
-!HISTORY_MSG_390;W - Residual - CB green low
-!HISTORY_MSG_391;W - Residual - CB blue low
-!HISTORY_MSG_392;W - Residual - Color Balance
-!HISTORY_MSG_393;DCP - Look table
-!HISTORY_MSG_394;DCP - Baseline exposure
-!HISTORY_MSG_395;DCP - Base table
-!HISTORY_MSG_396;W - Contrast sub-tool
-!HISTORY_MSG_397;W - Chroma sub-tool
-!HISTORY_MSG_398;W - ES sub-tool
-!HISTORY_MSG_399;W - Residual sub-tool
-!HISTORY_MSG_400;W - Final sub-tool
-!HISTORY_MSG_401;W - Toning sub-tool
-!HISTORY_MSG_402;W - Denoise sub-tool
-!HISTORY_MSG_403;W - ES - Edge sensitivity
-!HISTORY_MSG_404;W - ES - Base amplification
-!HISTORY_MSG_405;W - Denoise - Level 4
-!HISTORY_MSG_406;W - ES - Neighboring pixels
-!HISTORY_MSG_407;Retinex - Method
-!HISTORY_MSG_408;Retinex - Radius
-!HISTORY_MSG_409;Retinex - Contrast
-!HISTORY_MSG_410;Retinex - Offset
-!HISTORY_MSG_411;Retinex - Strength
-!HISTORY_MSG_412;Retinex - Gaussian gradient
-!HISTORY_MSG_413;Retinex - Contrast
-!HISTORY_MSG_414;Retinex - Histogram - Lab
-!HISTORY_MSG_415;Retinex - Transmission
-!HISTORY_MSG_416;Retinex
-!HISTORY_MSG_417;Retinex - Transmission median
-!HISTORY_MSG_418;Retinex - Threshold
-!HISTORY_MSG_419;Retinex - Color space
-!HISTORY_MSG_420;Retinex - Histogram - HSL
-!HISTORY_MSG_421;Retinex - Gamma
-!HISTORY_MSG_422;Retinex - Gamma
-!HISTORY_MSG_423;Retinex - Gamma slope
-!HISTORY_MSG_424;Retinex - HL threshold
-!HISTORY_MSG_425;Retinex - Log base
-!HISTORY_MSG_426;Retinex - Hue equalizer
-!HISTORY_MSG_427;Output rendering intent
-!HISTORY_MSG_428;Monitor rendering intent
-!HISTORY_MSG_429;Retinex - Iterations
-!HISTORY_MSG_430;Retinex - Transmission gradient
-!HISTORY_MSG_431;Retinex - Strength gradient
-!HISTORY_MSG_432;Retinex - M - Highlights
-!HISTORY_MSG_433;Retinex - M - Highlights TW
-!HISTORY_MSG_434;Retinex - M - Shadows
-!HISTORY_MSG_435;Retinex - M - Shadows TW
-!HISTORY_MSG_436;Retinex - M - Radius
-!HISTORY_MSG_437;Retinex - M - Method
-!HISTORY_MSG_438;Retinex - M - Equalizer
-!HISTORY_MSG_439;Retinex - Process
-!HISTORY_MSG_440;CbDL - Method
-!HISTORY_MSG_441;Retinex - Gain transmission
-!HISTORY_MSG_442;Retinex - Scale
-!HISTORY_MSG_443;Output black point compensation
-!HISTORY_MSG_444;WB - Temp bias
-!HISTORY_MSG_445;Raw sub-image
-!HISTORY_MSG_449;PS - ISO adaption
-!HISTORY_MSG_452;PS - Show motion
-!HISTORY_MSG_453;PS - Show mask only
-!HISTORY_MSG_457;PS - Check red/blue
-!HISTORY_MSG_462;PS - Check green
-!HISTORY_MSG_464;PS - Blur motion mask
-!HISTORY_MSG_465;PS - Blur radius
-!HISTORY_MSG_468;PS - Fill holes
-!HISTORY_MSG_469;PS - Median
-!HISTORY_MSG_471;PS - Motion correction
-!HISTORY_MSG_472;PS - Smooth transitions
-!HISTORY_MSG_473;PS - Use LMMSE
-!HISTORY_MSG_474;PS - Equalize
-!HISTORY_MSG_475;PS - Equalize channel
-!HISTORY_MSG_476;CAM02 - Temp out
-!HISTORY_MSG_477;CAM02 - Green out
-!HISTORY_MSG_478;CAM02 - Yb out
-!HISTORY_MSG_479;CAM02 - CAT02 adaptation out
-!HISTORY_MSG_480;CAM02 - Automatic CAT02 out
-!HISTORY_MSG_481;CAM02 - Temp scene
-!HISTORY_MSG_482;CAM02 - Green scene
-!HISTORY_MSG_483;CAM02 - Yb scene
-!HISTORY_MSG_484;CAM02 - Auto Yb scene
-!HISTORY_MSG_485;Lens Correction
-!HISTORY_MSG_486;Lens Correction - Camera
-!HISTORY_MSG_487;Lens Correction - Lens
-!HISTORY_MSG_488;Dynamic Range Compression
-!HISTORY_MSG_489;DRC - Detail
-!HISTORY_MSG_490;DRC - Amount
-!HISTORY_MSG_491;White Balance
-!HISTORY_MSG_492;RGB Curves
-!HISTORY_MSG_493;L*a*b* Adjustments
-!HISTORY_MSG_CLAMPOOG;Clip out-of-gamut colors
-!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_AB;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_CHANNEL;CT - Channel
-!HISTORY_MSG_COLORTONING_LABREGION_CHROMATICITYMASK;CT - region C mask
-!HISTORY_MSG_COLORTONING_LABREGION_HUEMASK;CT - H mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESS;CT - Lightness
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESSMASK;CT - L mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIST;CT - List
-!HISTORY_MSG_COLORTONING_LABREGION_MASKBLUR;CT - region mask blur
-!HISTORY_MSG_COLORTONING_LABREGION_OFFSET;CT - region offset
-!HISTORY_MSG_COLORTONING_LABREGION_POWER;CT - region power
-!HISTORY_MSG_COLORTONING_LABREGION_SATURATION;CT - Saturation
-!HISTORY_MSG_COLORTONING_LABREGION_SHOWMASK;CT - region show mask
-!HISTORY_MSG_COLORTONING_LABREGION_SLOPE;CT - region slope
-!HISTORY_MSG_DEHAZE_DEPTH;Dehaze - Depth
-!HISTORY_MSG_DEHAZE_ENABLED;Haze Removal
-!HISTORY_MSG_DEHAZE_SHOW_DEPTH_MAP;Dehaze - Show depth map
-!HISTORY_MSG_DEHAZE_STRENGTH;Dehaze - Strength
-!HISTORY_MSG_DUALDEMOSAIC_AUTO_CONTRAST;Dual demosaic - Auto threshold
-!HISTORY_MSG_DUALDEMOSAIC_CONTRAST;Dual demosaic - Contrast threshold
-!HISTORY_MSG_HISTMATCHING;Auto-matched tone curve
-!HISTORY_MSG_ICM_OUTPUT_PRIMARIES;Output - Primaries
-!HISTORY_MSG_ICM_OUTPUT_TEMP;Output - ICC-v4 illuminant D
-!HISTORY_MSG_ICM_OUTPUT_TYPE;Output - Type
-!HISTORY_MSG_ICM_WORKING_GAMMA;Working - Gamma
-!HISTORY_MSG_ICM_WORKING_SLOPE;Working - Slope
-!HISTORY_MSG_ICM_WORKING_TRC_METHOD;Working - TRC method
-!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
-!HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness
-!HISTORY_MSG_LOCALCONTRAST_ENABLED;Local Contrast
-!HISTORY_MSG_LOCALCONTRAST_LIGHTNESS;Local Contrast - Lightness
-!HISTORY_MSG_LOCALCONTRAST_RADIUS;Local Contrast - Radius
-!HISTORY_MSG_METADATA_MODE;Metadata copy mode
-!HISTORY_MSG_MICROCONTRAST_CONTRAST;Microcontrast - Contrast threshold
-!HISTORY_MSG_PIXELSHIFT_DEMOSAIC;PS - Demosaic method for motion
-!HISTORY_MSG_PREPROCESS_LINEDENOISE_DIRECTION;Line noise filter direction
-!HISTORY_MSG_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!HISTORY_MSG_PRSHARPEN_CONTRAST;PRS - Contrast threshold
-!HISTORY_MSG_RAWCACORR_AUTOIT;Raw CA Correction - Iterations
-!HISTORY_MSG_RAWCACORR_COLORSHIFT;Raw CA Correction - Avoid color shift
-!HISTORY_MSG_RAW_BORDER;Raw border
-!HISTORY_MSG_RESIZE_ALLOWUPSCALING;Resize - Allow upscaling
-!HISTORY_MSG_SHARPENING_BLUR;Sharpening - Blur radius
-!HISTORY_MSG_SHARPENING_CONTRAST;Sharpening - Contrast threshold
-!HISTORY_MSG_SH_COLORSPACE;S/H - Colorspace
-!HISTORY_MSG_SOFTLIGHT_ENABLED;Soft light
-!HISTORY_MSG_SOFTLIGHT_STRENGTH;Soft light - Strength
-!HISTORY_MSG_TM_FATTAL_ANCHOR;DRC - Anchor
-!ICCPROFCREATOR_COPYRIGHT;Copyright:
-!ICCPROFCREATOR_COPYRIGHT_RESET_TOOLTIP;Reset to the default copyright, granted to "RawTherapee, CC0"
-!ICCPROFCREATOR_CUSTOM;Custom
-!ICCPROFCREATOR_DESCRIPTION;Description:
-!ICCPROFCREATOR_DESCRIPTION_ADDPARAM;Append gamma and slope values to the description
-!ICCPROFCREATOR_DESCRIPTION_TOOLTIP;Leave empty to set the default description.
-!ICCPROFCREATOR_GAMMA;Gamma
-!ICCPROFCREATOR_ICCVERSION;ICC version:
-!ICCPROFCREATOR_ILL;Illuminant:
-!ICCPROFCREATOR_ILL_41;D41
-!ICCPROFCREATOR_ILL_50;D50
-!ICCPROFCREATOR_ILL_55;D55
-!ICCPROFCREATOR_ILL_60;D60
-!ICCPROFCREATOR_ILL_65;D65
-!ICCPROFCREATOR_ILL_80;D80
-!ICCPROFCREATOR_ILL_DEF;Default
-!ICCPROFCREATOR_ILL_INC;StdA 2856K
-!ICCPROFCREATOR_ILL_TOOLTIP;You can only set the illuminant for ICC v4 profiles.
-!ICCPROFCREATOR_PRIMARIES;Primaries:
-!ICCPROFCREATOR_PRIM_ACESP0;ACES AP0
-!ICCPROFCREATOR_PRIM_ACESP1;ACES AP1
-!ICCPROFCREATOR_PRIM_ADOBE;Adobe RGB (1998)
-!ICCPROFCREATOR_PRIM_BEST;BestRGB
-!ICCPROFCREATOR_PRIM_BETA;BetaRGB
-!ICCPROFCREATOR_PRIM_BLUX;Blue X
-!ICCPROFCREATOR_PRIM_BLUY;Blue Y
-!ICCPROFCREATOR_PRIM_BRUCE;BruceRGB
-!ICCPROFCREATOR_PRIM_GREX;Green X
-!ICCPROFCREATOR_PRIM_GREY;Green Y
-!ICCPROFCREATOR_PRIM_PROPH;Prophoto
-!ICCPROFCREATOR_PRIM_REC2020;Rec2020
-!ICCPROFCREATOR_PRIM_REDX;Red X
-!ICCPROFCREATOR_PRIM_REDY;Red Y
-!ICCPROFCREATOR_PRIM_SRGB;sRGB
-!ICCPROFCREATOR_PRIM_TOOLTIP;You can only set custom primaries for ICC v4 profiles.
-!ICCPROFCREATOR_PRIM_WIDEG;Widegamut
-!ICCPROFCREATOR_PROF_V2;ICC v2
-!ICCPROFCREATOR_PROF_V4;ICC v4
-!ICCPROFCREATOR_SAVEDIALOG_TITLE;Save ICC profile as...
-!ICCPROFCREATOR_SLOPE;Slope
-!ICCPROFCREATOR_TRC_PRESET;Tone response curve:
-!IPTCPANEL_CATEGORYHINT;Identifies the subject of the image in the opinion of the provider.
-!IPTCPANEL_CITYHINT;Enter the name of the city pictured in this image.
-!IPTCPANEL_COPYRIGHT;Copyright notice
-!IPTCPANEL_COPYRIGHTHINT;Enter a Notice on the current owner of the Copyright for this image, such as ©2008 Jane Doe.
-!IPTCPANEL_COUNTRYHINT;Enter the name of the country pictured in this image.
-!IPTCPANEL_CREATOR;Creator
-!IPTCPANEL_CREATORHINT;Enter the name of the person that created this image.
-!IPTCPANEL_CREATORJOBTITLE;Creator's job title
-!IPTCPANEL_CREATORJOBTITLEHINT;Enter the Job Title of the person listed in the Creator field.
-!IPTCPANEL_DATECREATEDHINT;Enter the Date the image was taken.
-!IPTCPANEL_DESCRIPTION;Description
-!IPTCPANEL_DESCRIPTIONHINT;Enter a "caption" describing the who, what, and why of what is happening in this image, this might include names of people, and/or their role in the action that is taking place within the image.
-!IPTCPANEL_DESCRIPTIONWRITER;Description writer
-!IPTCPANEL_DESCRIPTIONWRITERHINT;Enter the name of the person involved in writing, editing or correcting the description of the image.
-!IPTCPANEL_HEADLINEHINT;Enter a brief publishable synopsis or summary of the contents of the image.
-!IPTCPANEL_INSTRUCTIONSHINT;Enter information about embargoes, or other restrictions not covered by the Copyright field.
-!IPTCPANEL_KEYWORDSHINT;Enter any number of keywords, terms or phrases used to express the subject matter in the image.
-!IPTCPANEL_PROVINCE;Province or state
-!IPTCPANEL_PROVINCEHINT;Enter the name of the province or state pictured in this image.
-!IPTCPANEL_SOURCEHINT;Enter or edit the name of a person or party who has a role in the content supply chain, such as a person or entity from whom you received this image from.
-!IPTCPANEL_SUPPCATEGORIES;Supplemental categories
-!IPTCPANEL_SUPPCATEGORIESHINT;Further refines the subject of the image.
-!IPTCPANEL_TITLEHINT;Enter a short verbal and human readable name for the image, this may be the file name.
-!IPTCPANEL_TRANSREFERENCE;Job ID
-!IPTCPANEL_TRANSREFERENCEHINT;Enter a number or identifier needed for workflow control or tracking.
-!MAIN_BUTTON_ICCPROFCREATOR;ICC Profile Creator
-!MAIN_FRAME_PLACES_DEL;Remove
-!MAIN_MSG_TOOMANYOPENEDITORS;Too many open editors.\nPlease close an editor to continue.
-!MAIN_TAB_ADVANCED;Advanced
-!MAIN_TAB_ADVANCED_TOOLTIP;Shortcut: Alt-w
-!MAIN_TAB_FAVORITES;Favorites
-!MAIN_TAB_FAVORITES_TOOLTIP;Shortcut: Alt-u
-!MAIN_TAB_INSPECT; Inspect
-!MAIN_TOOLTIP_BACKCOLOR3;Background color of the preview: middle grey\nShortcut: 9
-!MAIN_TOOLTIP_PREVIEWSHARPMASK;Preview the sharpening contrast mask.\nShortcut: p\n\nOnly works when sharpening is enabled and zoom >= 100%.
-!MONITOR_PROFILE_SYSTEM;System default
-!NAVIGATOR_B;B:
-!NAVIGATOR_G;G:
-!NAVIGATOR_H;H:
-!NAVIGATOR_LAB_A;a*:
-!NAVIGATOR_LAB_B;b*:
-!NAVIGATOR_LAB_L;L*:
-!NAVIGATOR_NA; --
-!NAVIGATOR_R;R:
-!NAVIGATOR_S;S:
-!NAVIGATOR_V;V:
-!OPTIONS_BUNDLED_MISSING;The bundled profile "%1" could not be found!\n\nYour installation could be damaged.\n\nDefault internal values will be used instead.
-!OPTIONS_DEFIMG_MISSING;The default profile for non-raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!OPTIONS_DEFRAW_MISSING;The default profile for raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!PARTIALPASTE_ADVANCEDGROUP;Advanced Settings
-!PARTIALPASTE_COLORTONING;Color toning
-!PARTIALPASTE_DEHAZE;Haze removal
-!PARTIALPASTE_EQUALIZER;Wavelet levels
-!PARTIALPASTE_FILMSIMULATION;Film simulation
-!PARTIALPASTE_FLATFIELDCLIPCONTROL;Flat-field clip control
-!PARTIALPASTE_LOCALCONTRAST;Local contrast
-!PARTIALPASTE_METADATA;Metadata mode
-!PARTIALPASTE_METAGROUP;Metadata settings
-!PARTIALPASTE_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!PARTIALPASTE_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!PARTIALPASTE_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!PARTIALPASTE_PRSHARPENING;Post-resize sharpening
-!PARTIALPASTE_RAWCACORR_AVOIDCOLORSHIFT;CA avoid color shift
-!PARTIALPASTE_RAWCACORR_CAREDBLUE;CA red & blue
-!PARTIALPASTE_RAW_BORDER;Raw border
-!PARTIALPASTE_RAW_IMAGENUM;Sub-image
-!PARTIALPASTE_RAW_PIXELSHIFT;Pixel Shift
-!PARTIALPASTE_RETINEX;Retinex
-!PARTIALPASTE_SOFTLIGHT;Soft light
-!PARTIALPASTE_TM_FATTAL;Dynamic range compression
-!PREFERENCES_APPEARANCE;Appearance
-!PREFERENCES_APPEARANCE_COLORPICKERFONT;Color picker font
-!PREFERENCES_APPEARANCE_CROPMASKCOLOR;Crop mask color
-!PREFERENCES_APPEARANCE_MAINFONT;Main font
-!PREFERENCES_APPEARANCE_NAVGUIDECOLOR;Navigator guide color
-!PREFERENCES_APPEARANCE_THEME;Theme
-!PREFERENCES_AUTOSAVE_TP_OPEN;Save tool collapsed/expanded state on exit
-!PREFERENCES_CACHECLEAR;Clear
-!PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
-!PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
-!PREFERENCES_CACHECLEAR_ONLYPROFILES;Clear only cached processing profiles:
-!PREFERENCES_CACHECLEAR_SAFETY;Only files in the cache are cleared. Processing profiles stored alongside the source images are not touched.
-!PREFERENCES_CHUNKSIZES;Tiles per thread
-!PREFERENCES_CHUNKSIZE_RAW_AMAZE;AMaZE demosaic
-!PREFERENCES_CHUNKSIZE_RAW_CA;Raw CA correction
-!PREFERENCES_CHUNKSIZE_RAW_RCD;RCD demosaic
-!PREFERENCES_CHUNKSIZE_RAW_XT;Xtrans demosaic
-!PREFERENCES_CHUNKSIZE_RGB;RGB processing
-!PREFERENCES_CLUTSCACHE;HaldCLUT Cache
-!PREFERENCES_CLUTSCACHE_LABEL;Maximum number of cached CLUTs
-!PREFERENCES_CLUTSDIR;HaldCLUT directory
-!PREFERENCES_CMMBPC;Black point compensation
-!PREFERENCES_CROP;Crop Editing
-!PREFERENCES_CROP_AUTO_FIT;Automatically zoom to fit the crop
-!PREFERENCES_CROP_GUIDES;Guides shown when not editing the crop
-!PREFERENCES_CROP_GUIDES_FRAME;Frame
-!PREFERENCES_CROP_GUIDES_FULL;Original
-!PREFERENCES_CROP_GUIDES_NONE;None
-!PREFERENCES_CURVEBBOXPOS;Position of curve copy & paste buttons
-!PREFERENCES_CURVEBBOXPOS_ABOVE;Above
-!PREFERENCES_CURVEBBOXPOS_BELOW;Below
-!PREFERENCES_CURVEBBOXPOS_LEFT;Left
-!PREFERENCES_CURVEBBOXPOS_RIGHT;Right
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_DIRECTORIES;Directories
-!PREFERENCES_EDITORCMDLINE;Custom command line
-!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
-!PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
-!PREFERENCES_INSPECT_LABEL;Inspect
-!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
-!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
-!PREFERENCES_LANG;Language
-!PREFERENCES_MAXRECENTFOLDERS;Maximum number of recent folders
-!PREFERENCES_MONINTENT;Default rendering intent
-!PREFERENCES_MONITOR;Monitor
-!PREFERENCES_MONPROFILE;Default color profile
-!PREFERENCES_MONPROFILE_WARNOSX;Due to MacOS limitations, only sRGB is supported.
-!PREFERENCES_NAVIGATIONFRAME;Navigation
-!PREFERENCES_OVERLAY_FILENAMES_FILMSTRIP;Overlay filenames on thumbnails in the editor pannel
-!PREFERENCES_PARSEDEXTDOWNHINT;Move selected extension down in the list.
-!PREFERENCES_PARSEDEXTUPHINT;Move selected extension up in the list.
-!PREFERENCES_PERFORMANCE_MEASURE;Measure
-!PREFERENCES_PERFORMANCE_MEASURE_HINT;Logs processing times in console
-!PREFERENCES_PERFORMANCE_THREADS;Threads
-!PREFERENCES_PERFORMANCE_THREADS_LABEL;Maximum number of threads for Noise Reduction and Wavelet Levels (0 = Automatic)
-!PREFERENCES_PREVDEMO;Preview Demosaic Method
-!PREFERENCES_PREVDEMO_FAST;Fast
-!PREFERENCES_PREVDEMO_LABEL;Demosaicing method used for the preview at <100% zoom:
-!PREFERENCES_PREVDEMO_SIDECAR;As in PP3
-!PREFERENCES_PRINTER;Printer (Soft-Proofing)
-!PREFERENCES_PROFILESAVEBOTH;Save processing profile both to the cache and next to the input file
-!PREFERENCES_PROFILESAVELOCATION;Processing profile saving location
-!PREFERENCES_PROFILE_NONE;None
-!PREFERENCES_PRTINTENT;Rendering intent
-!PREFERENCES_PRTPROFILE;Color profile
-!PREFERENCES_REMEMBERZOOMPAN;Remember zoom % and pan offset
-!PREFERENCES_REMEMBERZOOMPAN_TOOLTIP;Remember the zoom % and pan offset of the current image when opening a new image.\n\nThis option only works in "Single Editor Tab Mode" and when "Demosaicing method used for the preview at <100% zoom" is set to "As in PP3".
-!PREFERENCES_SAVE_TP_OPEN_NOW;Save tool collapsed/expanded state now
-!PREFERENCES_SERIALIZE_TIFF_READ;TIFF Read Settings
-!PREFERENCES_SERIALIZE_TIFF_READ_LABEL;Serialize reading of TIFF files
-!PREFERENCES_SERIALIZE_TIFF_READ_TOOLTIP;Enabling this option when working with folders containing uncompressed TIFF files can increase performance of thumbnail generation.
-!PREFERENCES_SHOWFILMSTRIPTOOLBAR;Show Filmstrip toolbar
-!PREFERENCES_TAB_DYNAMICPROFILE;Dynamic Profile Rules
-!PREFERENCES_TAB_PERFORMANCE;Performance
-!PREFERENCES_THUMBNAIL_INSPECTOR_JPEG;Embedded JPEG preview
-!PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PROFILEPANEL_PDYNAMIC;Dynamic
-!PROGRESSBAR_DECODING;Decoding...
-!PROGRESSBAR_GREENEQUIL;Green equilibration...
-!PROGRESSBAR_HLREC;Highlight reconstruction...
-!PROGRESSBAR_HOTDEADPIXELFILTER;Hot/dead pixel filter...
-!PROGRESSBAR_LINEDENOISE;Line noise filter...
-!PROGRESSBAR_RAWCACORR;Raw CA correction...
-!QINFO_FRAMECOUNT;%2 frames
-!QINFO_HDR;HDR / %2 frame(s)
-!QINFO_PIXELSHIFT;Pixel Shift / %2 frame(s)
-!SAMPLEFORMAT_0;Unknown data format
-!SAMPLEFORMAT_1;8-bit unsigned
-!SAMPLEFORMAT_2;16-bit unsigned
-!SAMPLEFORMAT_4;24-bit LogLuv
-!SAMPLEFORMAT_8;32-bit LogLuv
-!SAMPLEFORMAT_16;16-bit floating-point
-!SAMPLEFORMAT_32;24-bit floating-point
-!SAMPLEFORMAT_64;32-bit floating-point
-!SAVEDLG_FILEFORMAT_FLOAT; floating-point
-!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
-!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!THRESHOLDSELECTOR_BL;Bottom-left
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
-!TP_BWMIX_FILTER_TOOLTIP;The color filter simulates shots taken with a colored filter placed in front of the lens. Colored filters reduce the transmission of specific color ranges and therefore affect their lightness. E.g. a red filter darkens blue skies.
-!TP_BWMIX_FILTER_YELLOW;Yellow
-!TP_BWMIX_GAMMA;Gamma Correction
-!TP_BWMIX_GAM_TOOLTIP;Correct gamma for each RGB channel.
-!TP_BWMIX_MIXC;Channel Mixer
-!TP_BWMIX_NEUTRAL;Reset
-!TP_CBDL_AFT;After Black-and-White
-!TP_CBDL_BEF;Before Black-and-White
-!TP_CBDL_METHOD;Process located
-!TP_CBDL_METHOD_TOOLTIP;Choose whether the Contrast by Detail Levels tool is to be positioned after the Black-and-White tool, which makes it work in L*a*b* space, or before it, which makes it work in RGB space.
-!TP_COLORAPP_ABSOLUTELUMINANCE;Absolute luminance
-!TP_COLORAPP_CAT02ADAPTATION_TOOLTIP;When setting manually, values above 65 are recommended.
-!TP_COLORAPP_FREE;Free temp+green + CAT02 + [output]
-!TP_COLORAPP_MEANLUMINANCE;Mean luminance (Yb%)
-!TP_COLORAPP_NEUTRAL;Reset
-!TP_COLORAPP_NEUTRAL_TIP;Reset all sliders checkbox and curves to their default values
-!TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD50 temp=5003\nD55 temp=5503\nD65 temp=6504\nD75 temp=7504
-!TP_COLORTONING_AB;o C/L
-!TP_COLORTONING_AUTOSAT;Automatic
-!TP_COLORTONING_BALANCE;Balance
-!TP_COLORTONING_BY;o C/L
-!TP_COLORTONING_CHROMAC;Opacity
-!TP_COLORTONING_COLOR;Color
-!TP_COLORTONING_CURVEEDITOR_CL_TOOLTIP;Chroma opacity as a function of luminance oC=f(L)
-!TP_COLORTONING_HIGHLIGHT;Highlights
-!TP_COLORTONING_HUE;Hue
-!TP_COLORTONING_LAB;L*a*b* blending
-!TP_COLORTONING_LABEL;Color Toning
-!TP_COLORTONING_LABGRID;L*a*b* color correction grid
-!TP_COLORTONING_LABGRID_VALUES;HL: a=%1 b=%2\nS: a=%3 b=%4
-!TP_COLORTONING_LABREGIONS;Color correction regions
-!TP_COLORTONING_LABREGION_ABVALUES;a=%1 b=%2
-!TP_COLORTONING_LABREGION_CHANNEL;Channel
-!TP_COLORTONING_LABREGION_CHANNEL_ALL;All
-!TP_COLORTONING_LABREGION_CHANNEL_B;Blue
-!TP_COLORTONING_LABREGION_CHANNEL_G;Green
-!TP_COLORTONING_LABREGION_CHANNEL_R;Red
-!TP_COLORTONING_LABREGION_CHROMATICITYMASK;C
-!TP_COLORTONING_LABREGION_HUEMASK;H
-!TP_COLORTONING_LABREGION_LIGHTNESS;Lightness
-!TP_COLORTONING_LABREGION_LIGHTNESSMASK;L
-!TP_COLORTONING_LABREGION_LIST_TITLE;Correction
-!TP_COLORTONING_LABREGION_MASK;Mask
-!TP_COLORTONING_LABREGION_MASKBLUR;Mask Blur
-!TP_COLORTONING_LABREGION_OFFSET;Offset
-!TP_COLORTONING_LABREGION_POWER;Power
-!TP_COLORTONING_LABREGION_SATURATION;Saturation
-!TP_COLORTONING_LABREGION_SHOWMASK;Show mask
-!TP_COLORTONING_LABREGION_SLOPE;Slope
-!TP_COLORTONING_LUMA;Luminance
-!TP_COLORTONING_LUMAMODE;Preserve luminance
-!TP_COLORTONING_LUMAMODE_TOOLTIP;If enabled, when you change color (red, green, cyan, blue, etc.) the luminance of each pixel is preserved.
-!TP_COLORTONING_METHOD;Method
-!TP_COLORTONING_METHOD_TOOLTIP;"L*a*b* blending", "RGB sliders" and "RGB curves" use interpolated color blending.\n"Color balance (Shadows/Midtones/Highlights)" and "Saturation 2 colors" use direct colors.\n\nThe Black-and-White tool can be enabled when using any color toning method, which allows for color toning.
-!TP_COLORTONING_MIDTONES;Midtones
-!TP_COLORTONING_NEUTRAL;Reset sliders
-!TP_COLORTONING_NEUTRAL_TIP;Reset all values (Shadows, Midtones, Highlights) to default.
-!TP_COLORTONING_OPACITY;Opacity
-!TP_COLORTONING_RGBCURVES;RGB - Curves
-!TP_COLORTONING_RGBSLIDERS;RGB - Sliders
-!TP_COLORTONING_SA;Saturation Protection
-!TP_COLORTONING_SATURATEDOPACITY;Strength
-!TP_COLORTONING_SATURATIONTHRESHOLD;Threshold
-!TP_COLORTONING_SHADOWS;Shadows
-!TP_COLORTONING_SPLITCO;Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITCOCO;Color Balance Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITLR;Saturation 2 colors
-!TP_COLORTONING_STR;Strength
-!TP_COLORTONING_STRENGTH;Strength
-!TP_COLORTONING_TWO2;Special chroma '2 colors'
-!TP_COLORTONING_TWOALL;Special chroma
-!TP_COLORTONING_TWOBY;Special a* and b*
-!TP_COLORTONING_TWOCOLOR_TOOLTIP;Standard chroma:\nLinear response, a* = b*.\n\nSpecial chroma:\nLinear response, a* = b*, but unbound - try under the diagonal.\n\nSpecial a* and b*:\nLinear response unbound with separate curves for a* and b*. Intended for special effects.\n\nSpecial chroma 2 colors:\nMore predictable.
-!TP_COLORTONING_TWOSTD;Standard chroma
-!TP_CROP_GTHARMMEANS;Harmonic Means
-!TP_CROP_GTTRIANGLE1;Golden Triangles 1
-!TP_CROP_GTTRIANGLE2;Golden Triangles 2
-!TP_CROP_PPI;PPI
-!TP_CROP_RESETCROP;Reset
-!TP_CROP_SELECTCROP;Select
-!TP_DEHAZE_DEPTH;Depth
-!TP_DEHAZE_LABEL;Haze Removal
-!TP_DEHAZE_SHOW_DEPTH_MAP;Show depth map
-!TP_DEHAZE_STRENGTH;Strength
-!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
-!TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominance
-!TP_DIRPYRDENOISE_CHROMINANCE_MANUAL;Manual
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD;Method
-!TP_DIRPYRDENOISE_CHROMINANCE_METHODADVANCED_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nAutomatic multi-zones\nNo preview - works only during saving, but using the "Preview" method by matching the tile size and center to the preview size and center you can get an idea of the expected results.\nThe image is divided into tiles (about 10 to 70 depending on image size) and each tile receives its own chrominance noise reduction settings.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_PMZ;Preview multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW;Preview
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEWRESIDUAL_INFO_TOOLTIP;Displays the remaining noise levels of the part of the image visible in the preview after wavelet.\n\n>300 Very noisy\n100-300 Noisy\n50-100 A little noisy\n<50 Very low noise\n\nBeware, the values will differ between RGB and L*a*b* mode. The RGB values are less accurate because the RGB mode does not completely separate luminance and chrominance.
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_INFO;Preview size=%1, Center: Px=%2 Py=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Preview noise: Mean=%1 High=%2
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= - High= -
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2 Ty=%3
-!TP_DIRPYRDENOISE_LABEL;Noise Reduction
-!TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
-!TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
-!TP_DIRPYRDENOISE_LUMINANCE_FRAME;Luminance
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MAIN_MODE;Mode
-!TP_DIRPYRDENOISE_MAIN_MODE_AGGRESSIVE;Aggressive
-!TP_DIRPYRDENOISE_MAIN_MODE_CONSERVATIVE;Conservative
-!TP_DIRPYRDENOISE_MAIN_MODE_TOOLTIP;"Conservative" preserves low frequency chroma patterns, while "aggressive" obliterates them.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD;Median method
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_CHROMINANCE;Chroma only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LABEL;Median Filter
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LUMINANCE;Luminance only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_RGB;RGB
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_TOOLTIP;When using the "Luminance only" and "L*a*b*" methods, median filtering will be performed just after the wavelet step in the noise reduction pipeline.\nWhen using the "RGB" mode, it will be performed at the very end of the noise reduction pipeline.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_WEIGHTED;Weighted L* (little) + a*b* (normal)
-!TP_DIRPYRDENOISE_MEDIAN_PASSES;Median iterations
-!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
-!TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
-!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
-!TP_DIRPYRDENOISE_TYPE_3X3;3×3
-!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
-!TP_DIRPYRDENOISE_TYPE_5X5;5×5
-!TP_DIRPYRDENOISE_TYPE_5X5SOFT;5×5 soft
-!TP_DIRPYRDENOISE_TYPE_7X7;7×7
-!TP_DIRPYRDENOISE_TYPE_9X9;9×9
-!TP_DIRPYREQUALIZER_ALGO;Skin Color Range
-!TP_DIRPYREQUALIZER_ALGO_TOOLTIP;Fine: closer to the colors of the skin, minimizing the action on other colors\nLarge: avoid more artifacts.
-!TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts
-!TP_DIRPYREQUALIZER_HUESKIN;Skin hue
-!TP_DIRPYREQUALIZER_HUESKIN_TOOLTIP;This pyramid is for the upper part, so far as the algorithm at its maximum efficiency.\nTo the lower part, the transition zones.\nIf you need to move the area significantly to the left or right - or if there are artifacts: the white balance is incorrect\nYou can slightly reduce the zone to prevent the rest of the image is affected.
-!TP_DIRPYREQUALIZER_SKIN;Skin targetting/protection
-!TP_DIRPYREQUALIZER_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image.
-!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
-!TP_EPD_GAMMA;Gamma
-!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
-!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
-!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
-!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
-!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual
-!TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points
-!TP_EXPOS_WHITEPOINT_LABEL;Raw White Points
-!TP_FILMSIMULATION_LABEL;Film Simulation
-!TP_FILMSIMULATION_SLOWPARSEDIR;RawTherapee is configured to look for Hald CLUT images, which are used for the Film Simulation tool, in a folder which is taking too long to load.\nGo to Preferences > Image Processing > Film Simulation\nto see which folder is being used. You should either point RawTherapee to a folder which contains only Hald CLUT images and nothing more, or to an empty folder if you don't want to use the Film Simulation tool.\n\nRead the Film Simulation article in RawPedia for more information.\n\nDo you want to cancel the scan now?
-!TP_FILMSIMULATION_STRENGTH;Strength
-!TP_FILMSIMULATION_ZEROCLUTSFOUND;Set HaldCLUT directory in Preferences
-!TP_FLATFIELD_CLIPCONTROL;Clip control
-!TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Clip control avoids clipped highlights caused by applying the flat field. If there are already clipped highlights before applying the flat field, clip control can lead to color cast.
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Baseline exposure
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET_TOOLTIP;Employ the embedded DCP baseline exposure offset. The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYHUESATMAP;Base table
-!TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYLOOKTABLE;Look table
-!TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-!TP_ICM_BPC;Black Point Compensation
-!TP_ICM_DCPILLUMINANT_TOOLTIP;Select which embedded DCP illuminant to employ. Default is "interpolated" which is a mix between the two based on white balance. The setting is only available if a dual-illuminant DCP with interpolation support is selected.
-!TP_ICM_INPUTCAMERAICC_TOOLTIP;Use RawTherapee's camera-specific DCP or ICC input color profiles. These profiles are more precise than simpler matrix ones. They are not available for all cameras. These profiles are stored in the /iccprofiles/input and /dcpprofiles folders and are automatically retrieved based on a file name matching to the exact model name of the camera.
-!TP_ICM_PROFILEINTENT;Rendering Intent
-!TP_ICM_SAVEREFERENCE;Save Reference Image
-!TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance
-!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles.
-!TP_ICM_WORKING_TRC;Tone response curve:
-!TP_ICM_WORKING_TRC_CUSTOM;Custom
-!TP_ICM_WORKING_TRC_GAMMA;Gamma
-!TP_ICM_WORKING_TRC_NONE;None
-!TP_ICM_WORKING_TRC_SLOPE;Slope
-!TP_ICM_WORKING_TRC_TOOLTIP;Only for built-in profiles.
-!TP_LENSPROFILE_CORRECTION_AUTOMATCH;Automatically selected
-!TP_LENSPROFILE_CORRECTION_LCPFILE;LCP file
-!TP_LENSPROFILE_CORRECTION_MANUAL;Manually selected
-!TP_LENSPROFILE_LENS_WARNING;Warning: the crop factor used for lens profiling is larger than the crop factor of the camera, the results might be wrong.
-!TP_LENSPROFILE_MODE_HEADER;Lens Profile
-!TP_LENSPROFILE_USE_CA;Chromatic aberration
-!TP_LENSPROFILE_USE_GEOMETRIC;Geometric distortion
-!TP_LENSPROFILE_USE_HEADER;Correct
-!TP_LENSPROFILE_USE_VIGNETTING;Vignetting
-!TP_LOCALCONTRAST_AMOUNT;Amount
-!TP_LOCALCONTRAST_DARKNESS;Darkness level
-!TP_LOCALCONTRAST_LABEL;Local Contrast
-!TP_LOCALCONTRAST_LIGHTNESS;Lightness level
-!TP_LOCALCONTRAST_RADIUS;Radius
-!TP_METADATA_EDIT;Apply modifications
-!TP_METADATA_MODE;Metadata copy mode
-!TP_METADATA_STRIP;Strip all metadata
-!TP_METADATA_TUNNEL;Copy unchanged
-!TP_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!TP_PREPROCESS_DEADPIXFILT_TOOLTIP;Tries to suppress dead pixels.
-!TP_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!TP_PREPROCESS_HOTPIXFILT_TOOLTIP;Tries to suppress hot pixels.
-!TP_PREPROCESS_LINEDENOISE_DIRECTION;Direction
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_BOTH;Both
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_HORIZONTAL;Horizontal
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_PDAF_LINES;Horizontal only on PDAF rows
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_VERTICAL;Vertical
-!TP_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!TP_PRSHARPENING_LABEL;Post-Resize Sharpening
-!TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions.
-!TP_RAWCACORR_AUTOIT;Iterations
-!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
-!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CASTR;Strength
-!TP_RAWEXPOS_BLACK_0;Green 1 (lead)
-!TP_RAWEXPOS_BLACK_1;Red
-!TP_RAWEXPOS_BLACK_2;Blue
-!TP_RAWEXPOS_BLACK_3;Green 2
-!TP_RAWEXPOS_BLACK_BLUE;Blue
-!TP_RAWEXPOS_BLACK_GREEN;Green
-!TP_RAWEXPOS_BLACK_RED;Red
-!TP_RAWEXPOS_RGB;Red, Green, Blue
-!TP_RAW_1PASSMEDIUM;1-pass (Markesteijn)
-!TP_RAW_2PASS;1-pass+fast
-!TP_RAW_3PASSBEST;3-pass (Markesteijn)
-!TP_RAW_4PASS;3-pass+fast
-!TP_RAW_AHD;AHD
-!TP_RAW_AMAZE;AMaZE
-!TP_RAW_AMAZEVNG4;AMaZE+VNG4
-!TP_RAW_BORDER;Border
-!TP_RAW_DCB;DCB
-!TP_RAW_DCBVNG4;DCB+VNG4
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST;Auto threshold
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST_TOOLTIP;If the checkbox is checked (recommended), RawTherapee calculates an optimum value based on flat regions in the image.\nIf there is no flat region in the image or the image is too noisy, the value will be set to 0.\nTo set the value manually, uncheck the checkbox first (reasonable values depend on the image).
-!TP_RAW_DUALDEMOSAICCONTRAST;Contrast threshold
-!TP_RAW_EAHD;EAHD
-!TP_RAW_FAST;Fast
-!TP_RAW_HD;Threshold
-!TP_RAW_HD_TOOLTIP;Lower values make hot/dead pixel detection more aggressive, but false positives may lead to artifacts. If you notice any artifacts appearing when enabling the Hot/Dead Pixel Filters, gradually increase the threshold value until they disappear.
-!TP_RAW_HPHD;HPHD
-!TP_RAW_IGV;IGV
-!TP_RAW_IMAGENUM;Sub-image
-!TP_RAW_IMAGENUM_SN;SN mode
-!TP_RAW_IMAGENUM_TOOLTIP;Some raw files consist of several sub-images (Pentax/Sony Pixel Shift, Pentax 3-in-1 HDR, Canon Dual Pixel, Fuji EXR).\n\nWhen using any demosaicing method other than Pixel Shift, this selects which sub-image is used.\n\nWhen using the Pixel Shift demosaicing method on a Pixel Shift raw, all sub-images are used, and this selects which sub-image should be used for moving parts.
-!TP_RAW_LMMSE;LMMSE
-!TP_RAW_MONO;Mono
-!TP_RAW_NONE;None (Shows sensor pattern)
-!TP_RAW_PIXELSHIFT;Pixel Shift
-!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
-!TP_RAW_PIXELSHIFTDMETHOD;Demosaic method for motion
-!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
-!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
-!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
-!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
-!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
-!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
-!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
-!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
-!TP_RAW_PIXELSHIFTMM_OFF;Off
-!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
-!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
-!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
-!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
-!TP_RAW_PIXELSHIFTSIGMA;Blur radius
-!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
-!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
-!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
-!TP_RAW_RCD;RCD
-!TP_RAW_RCDVNG4;RCD+VNG4
-!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
-!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.\n+fast gives less artifacts in flat areas
-!TP_RAW_SENSOR_XTRANS_LABEL;Sensor with X-Trans Matrix
-!TP_RAW_VNG4;VNG4
-!TP_RAW_XTRANS;X-Trans
-!TP_RAW_XTRANSFAST;Fast X-Trans
-!TP_RESIZE_ALLOW_UPSCALING;Allow Upscaling
-!TP_RETINEX_CONTEDIT_HSL;HSL histogram
-!TP_RETINEX_CONTEDIT_LAB;L*a*b* histogram
-!TP_RETINEX_CONTEDIT_LH;Hue
-!TP_RETINEX_CONTEDIT_MAP;Equalizer
-!TP_RETINEX_CURVEEDITOR_CD;L=f(L)
-!TP_RETINEX_CURVEEDITOR_CD_TOOLTIP;Luminance according to luminance L=f(L)\nCorrect raw data to reduce halos and artifacts.
-!TP_RETINEX_CURVEEDITOR_LH;Strength=f(H)
-!TP_RETINEX_CURVEEDITOR_LH_TOOLTIP;Strength according to hue Strength=f(H)\nThis curve also acts on chroma when using the "Highlight" retinex method.
-!TP_RETINEX_CURVEEDITOR_MAP;L=f(L)
-!TP_RETINEX_CURVEEDITOR_MAP_TOOLTIP;This curve can be applied alone or with a Gaussian mask or wavelet mask.\nBeware of artifacts!
-!TP_RETINEX_EQUAL;Equalizer
-!TP_RETINEX_FREEGAMMA;Free gamma
-!TP_RETINEX_GAIN;Gain
-!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
-!TP_RETINEX_GAINTRANSMISSION;Gain transmission
-!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
-!TP_RETINEX_GAMMA;Gamma
-!TP_RETINEX_GAMMA_FREE;Free
-!TP_RETINEX_GAMMA_HIGH;High
-!TP_RETINEX_GAMMA_LOW;Low
-!TP_RETINEX_GAMMA_MID;Middle
-!TP_RETINEX_GAMMA_NONE;None
-!TP_RETINEX_GAMMA_TOOLTIP;Restore tones by applying gamma before and after Retinex. Different from Retinex curves or others curves (Lab, Exposure, etc.).
-!TP_RETINEX_GRAD;Transmission gradient
-!TP_RETINEX_GRADS;Strength gradient
-!TP_RETINEX_GRADS_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Strength is reduced when iterations increase, and conversely.
-!TP_RETINEX_GRAD_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Variance and Threshold are reduced when iterations increase, and conversely.
-!TP_RETINEX_HIGH;High
-!TP_RETINEX_HIGHLIG;Highlight
-!TP_RETINEX_HIGHLIGHT;Highlight threshold
-!TP_RETINEX_HIGHLIGHT_TOOLTIP;Increase action of High algorithm.\nMay require you to re-adjust "Neighboring pixels" and to increase the "White-point correction" in the Raw tab -> Raw White Points tool.
-!TP_RETINEX_HSLSPACE_LIN;HSL-Linear
-!TP_RETINEX_HSLSPACE_LOG;HSL-Logarithmic
-!TP_RETINEX_ITER;Iterations (Tone-mapping)
-!TP_RETINEX_ITERF;Tone mapping
-!TP_RETINEX_ITER_TOOLTIP;Simulate a tone-mapping operator.\nHigh values increase the processing time.
-!TP_RETINEX_LABEL;Retinex
-!TP_RETINEX_LABEL_MASK;Mask
-!TP_RETINEX_LABSPACE;L*a*b*
-!TP_RETINEX_LOW;Low
-!TP_RETINEX_MAP;Method
-!TP_RETINEX_MAP_GAUS;Gaussian mask
-!TP_RETINEX_MAP_MAPP;Sharp mask (wavelet partial)
-!TP_RETINEX_MAP_MAPT;Sharp mask (wavelet total)
-!TP_RETINEX_MAP_METHOD_TOOLTIP;Use the mask generated by the Gaussian function above (Radius, Method) to reduce halos and artifacts.\n\nCurve only: apply a diagonal contrast curve on the mask.\nBeware of artifacts!\n\nGaussian mask: generate and use a Gaussian blur of the original mask.\nQuick.\n\nSharp mask: generate and use a wavelet on the original mask.\nSlow.
-!TP_RETINEX_MAP_NONE;None
-!TP_RETINEX_MEDIAN;Transmission median filter
-!TP_RETINEX_METHOD;Method
-!TP_RETINEX_METHOD_TOOLTIP;Low = Reinforce low light.\nUniform = Equalize action.\nHigh = Reinforce high light.\nHighlights = Remove magenta in highlights.
-!TP_RETINEX_MLABEL;Restored haze-free Min=%1 Max=%2
-!TP_RETINEX_MLABEL_TOOLTIP;Should be near min=0 max=32768\nRestored image with no mixture.
-!TP_RETINEX_NEIGHBOR;Radius
-!TP_RETINEX_NEUTRAL;Reset
-!TP_RETINEX_NEUTRAL_TIP;Reset all sliders and curves to their default values.
-!TP_RETINEX_OFFSET;Offset (brightness)
-!TP_RETINEX_SCALES;Gaussian gradient
-!TP_RETINEX_SCALES_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Scale and radius are reduced when iterations increase, and conversely.
-!TP_RETINEX_SETTINGS;Settings
-!TP_RETINEX_SKAL;Scale
-!TP_RETINEX_SLOPE;Free gamma slope
-!TP_RETINEX_STRENGTH;Strength
-!TP_RETINEX_THRESHOLD;Threshold
-!TP_RETINEX_THRESHOLD_TOOLTIP;Limits in/out.\nIn = image source,\nOut = image gauss.
-!TP_RETINEX_TLABEL;TM Min=%1 Max=%2 Mean=%3 Sigma=%4
-!TP_RETINEX_TLABEL2;TM Tm=%1 TM=%2
-!TP_RETINEX_TLABEL_TOOLTIP;Transmission map result.\nMin and Max are used by Variance.\nMean and Sigma.\nTm=Min TM=Max of transmission map.
-!TP_RETINEX_TRANF;Transmission
-!TP_RETINEX_TRANSMISSION;Transmission map
-!TP_RETINEX_TRANSMISSION_TOOLTIP;Transmission according to transmission.\nAbscissa: transmission from negative values (min), mean, and positives values (max).\nOrdinate: amplification or reduction.
-!TP_RETINEX_UNIFORM;Uniform
-!TP_RETINEX_VARIANCE;Contrast
-!TP_RETINEX_VARIANCE_TOOLTIP;Low variance increase local contrast and saturation, but can lead to artifacts.
-!TP_RETINEX_VIEW;Process
-!TP_RETINEX_VIEW_MASK;Mask
-!TP_RETINEX_VIEW_METHOD_TOOLTIP;Standard - Normal display.\nMask - Displays the mask.\nUnsharp mask - Displays the image with a high radius unsharp mask.\nTransmission - Auto/Fixed - Displays the file transmission-map, before any action on contrast and brightness.\n\nAttention: the mask does not correspond to reality, but is amplified to make it more visible.
-!TP_RETINEX_VIEW_NONE;Standard
-!TP_RETINEX_VIEW_TRAN;Transmission - Auto
-!TP_RETINEX_VIEW_TRAN2;Transmission - Fixed
-!TP_RETINEX_VIEW_UNSHARP;Unsharp mask
-!TP_SHARPENING_BLUR;Blur radius
-!TP_SHARPENING_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_CONTRAST;Contrast threshold
-!TP_SOFTLIGHT_LABEL;Soft Light
-!TP_SOFTLIGHT_STRENGTH;Strength
-!TP_TM_FATTAL_AMOUNT;Amount
-!TP_TM_FATTAL_ANCHOR;Anchor
-!TP_TM_FATTAL_LABEL;Dynamic Range Compression
-!TP_TM_FATTAL_THRESHOLD;Detail
-!TP_WAVELET_1;Level 1
-!TP_WAVELET_2;Level 2
-!TP_WAVELET_3;Level 3
-!TP_WAVELET_4;Level 4
-!TP_WAVELET_5;Level 5
-!TP_WAVELET_6;Level 6
-!TP_WAVELET_7;Level 7
-!TP_WAVELET_8;Level 8
-!TP_WAVELET_9;Level 9
-!TP_WAVELET_APPLYTO;Apply To
-!TP_WAVELET_AVOID;Avoid color shift
-!TP_WAVELET_B0;Black
-!TP_WAVELET_B1;Grey
-!TP_WAVELET_B2;Residual
-!TP_WAVELET_BACKGROUND;Background
-!TP_WAVELET_BACUR;Curve
-!TP_WAVELET_BALANCE;Contrast balance d/v-h
-!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified.
-!TP_WAVELET_BALCHRO;Chroma balance
-!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance.
-!TP_WAVELET_BANONE;None
-!TP_WAVELET_BASLI;Slider
-!TP_WAVELET_BATYPE;Contrast balance method
-!TP_WAVELET_CBENAB;Toning and Color Balance
-!TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted
-!TP_WAVELET_CCURVE;Local contrast
-!TP_WAVELET_CH1;Whole chroma range
-!TP_WAVELET_CH2;Saturated/pastel
-!TP_WAVELET_CH3;Link contrast levels
-!TP_WAVELET_CHCU;Curve
-!TP_WAVELET_CHR;Chroma-contrast link strength
-!TP_WAVELET_CHRO;Saturated/pastel threshold
-!TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored.
-!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength"
-!TP_WAVELET_CHSL;Sliders
-!TP_WAVELET_CHTYPE;Chrominance method
-!TP_WAVELET_COLORT;Opacity Red-Green
-!TP_WAVELET_COMPCONT;Contrast
-!TP_WAVELET_COMPGAMMA;Compression gamma
-!TP_WAVELET_COMPGAMMA_TOOLTIP;Adjusting the gamma of the residual image allows you to equilibrate the data and histogram.
-!TP_WAVELET_COMPTM;Tone mapping
-!TP_WAVELET_CONTEDIT;'After' contrast curve
-!TP_WAVELET_CONTR;Gamut
-!TP_WAVELET_CONTRA;Contrast
-!TP_WAVELET_CONTRAST_MINUS;Contrast -
-!TP_WAVELET_CONTRAST_PLUS;Contrast +
-!TP_WAVELET_CONTRA_TOOLTIP;Changes contrast of the residual image.
-!TP_WAVELET_CTYPE;Chrominance control
-!TP_WAVELET_CURVEEDITOR_CC_TOOLTIP;Modifies local contrast as a function of the original local contrast (abscissa).\nLow abscissa values represent small local contrast (real values about 10..20).\n50% abscissa represents average local contrast (real value about 100..300).\n66% abscissa represents standard deviation of local contrast (real value about 300..800).\n100% abscissa represents maximum local contrast (real value about 3000..8000).
-!TP_WAVELET_CURVEEDITOR_CH;Contrast levels=f(Hue)
-!TP_WAVELET_CURVEEDITOR_CH_TOOLTIP;Modifies each level's contrast as a function of hue.\nTake care not to overwrite changes made with the Gamut sub-tool's hue controls.\nThe curve will only have an effect when wavelet contrast level sliders are non-zero.
-!TP_WAVELET_CURVEEDITOR_CL;L
-!TP_WAVELET_CURVEEDITOR_CL_TOOLTIP;Applies a final contrast luminance curve at the end of the wavelet treatment.
-!TP_WAVELET_CURVEEDITOR_HH;HH
-!TP_WAVELET_CURVEEDITOR_HH_TOOLTIP;Modifies the residual image's hue as a function of hue.
-!TP_WAVELET_DALL;All directions
-!TP_WAVELET_DAUB;Edge performance
-!TP_WAVELET_DAUB2;D2 - low
-!TP_WAVELET_DAUB4;D4 - standard
-!TP_WAVELET_DAUB6;D6 - standard plus
-!TP_WAVELET_DAUB10;D10 - medium
-!TP_WAVELET_DAUB14;D14 - high
-!TP_WAVELET_DAUB_TOOLTIP;Changes Daubechies coefficients:\nD4 = Standard,\nD14 = Often best performance, 10% more time-intensive.\n\nAffects edge detection as well as the general quality of the firsts levels. However the quality is not strictly related to this coefficient and can vary with images and uses.
-!TP_WAVELET_DONE;Vertical
-!TP_WAVELET_DTHR;Diagonal
-!TP_WAVELET_DTWO;Horizontal
-!TP_WAVELET_EDCU;Curve
-!TP_WAVELET_EDGCONT;Local contrast
-!TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, top-left, top-right and bottom-right represent respectively local contrast for low values, mean, mean+stdev and maxima.
-!TP_WAVELET_EDGE;Edge Sharpness
-!TP_WAVELET_EDGEAMPLI;Base amplification
-!TP_WAVELET_EDGEDETECT;Gradient sensitivity
-!TP_WAVELET_EDGEDETECTTHR;Threshold low (noise)
-!TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection)
-!TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky.
-!TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise.
-!TP_WAVELET_EDGESENSI;Edge sensitivity
-!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
-!TP_WAVELET_EDGTHRESH;Detail
-!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
-!TP_WAVELET_EDRAD;Radius
-!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
-!TP_WAVELET_EDSL;Threshold Sliders
-!TP_WAVELET_EDTYPE;Local contrast method
-!TP_WAVELET_EDVAL;Strength
-!TP_WAVELET_FINAL;Final Touchup
-!TP_WAVELET_FINEST;Finest
-!TP_WAVELET_HIGHLIGHT;Highlight luminance range
-!TP_WAVELET_HS1;Whole luminance range
-!TP_WAVELET_HS2;Shadows/Highlights
-!TP_WAVELET_HUESKIN;Skin hue
-!TP_WAVELET_HUESKIN_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_HUESKY;Sky hue
-!TP_WAVELET_HUESKY_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_ITER;Delta balance levels
-!TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels.
-!TP_WAVELET_LABEL;Wavelet Levels
-!TP_WAVELET_LARGEST;Coarsest
-!TP_WAVELET_LEVCH;Chroma
-!TP_WAVELET_LEVDIR_ALL;All levels in all directions
-!TP_WAVELET_LEVDIR_INF;Below or equal the level
-!TP_WAVELET_LEVDIR_ONE;One level
-!TP_WAVELET_LEVDIR_SUP;Above the level
-!TP_WAVELET_LEVELS;Wavelet levels
-!TP_WAVELET_LEVELS_TOOLTIP;Choose the number of detail levels the image is to be decomposed into. More levels require more RAM and require a longer processing time.
-!TP_WAVELET_LEVF;Contrast
-!TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1
-!TP_WAVELET_LEVONE;Level 2
-!TP_WAVELET_LEVTHRE;Level 4
-!TP_WAVELET_LEVTWO;Level 3
-!TP_WAVELET_LEVZERO;Level 1
-!TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength
-!TP_WAVELET_LIPST;Enhanced algoritm
-!TP_WAVELET_LOWLIGHT;Shadow luminance range
-!TP_WAVELET_MEDGREINF;First level
-!TP_WAVELET_MEDI;Reduce artifacts in blue sky
-!TP_WAVELET_MEDILEV;Edge detection
-!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine.
-!TP_WAVELET_NEUTRAL;Neutral
-!TP_WAVELET_NOIS;Denoise
-!TP_WAVELET_NOISE;Denoise and Refine
-!TP_WAVELET_NPHIGH;High
-!TP_WAVELET_NPLOW;Low
-!TP_WAVELET_NPNONE;None
-!TP_WAVELET_NPTYPE;Neighboring pixels
-!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced.
-!TP_WAVELET_OPACITY;Opacity Blue-Yellow
-!TP_WAVELET_OPACITYW;Contrast balance d/v-h curve
-!TP_WAVELET_OPACITYWL;Final local contrast
-!TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right.
-!TP_WAVELET_PASTEL;Pastel chroma
-!TP_WAVELET_PROC;Process
-!TP_WAVELET_RE1;Reinforced
-!TP_WAVELET_RE2;Unchanged
-!TP_WAVELET_RE3;Reduced
-!TP_WAVELET_RESCHRO;Chroma
-!TP_WAVELET_RESCON;Shadows
-!TP_WAVELET_RESCONH;Highlights
-!TP_WAVELET_RESID;Residual Image
-!TP_WAVELET_SAT;Saturated chroma
-!TP_WAVELET_SETTINGS;Wavelet Settings
-!TP_WAVELET_SKIN;Skin targetting/protection
-!TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_WAVELET_SKY;Sky targetting/protection
-!TP_WAVELET_SKY_TOOLTIP;At -100 sky-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 sky-tones are protected while all other tones are affected.
-!TP_WAVELET_STREN;Strength
-!TP_WAVELET_STRENGTH;Strength
-!TP_WAVELET_SUPE;Extra
-!TP_WAVELET_THR;Shadows threshold
-!TP_WAVELET_THRESHOLD;Highlight levels
-!TP_WAVELET_THRESHOLD2;Shadow levels
-!TP_WAVELET_THRESHOLD2_TOOLTIP;Only levels between 9 and 9 minus the value will be affected by the shadow luminance range. Other levels will be fully treated. The highest level possible is limited by the highlight level value (9 minus highlight level value).
-!TP_WAVELET_THRESHOLD_TOOLTIP;Only levels beyond the chosen value will be affected by the highlight luminance range. Other levels will be fully treated. The chosen value here limits the highest possible value of the shadow levels.
-!TP_WAVELET_THRH;Highlights threshold
-!TP_WAVELET_TILESBIG;Big tiles
-!TP_WAVELET_TILESFULL;Full image
-!TP_WAVELET_TILESIZE;Tiling method
-!TP_WAVELET_TILESLIT;Little tiles
-!TP_WAVELET_TILES_TOOLTIP;Processing the full image leads to better quality and is the recommended option, while using tiles is a fall-back solution for users with little RAM. Refer to RawPedia for memory requirements.
-!TP_WAVELET_TMSTRENGTH;Compression strength
-!TP_WAVELET_TMSTRENGTH_TOOLTIP;Control the strength of tone mapping or contrast compression of the residual image. When the value is different from 0, the Strength and Gamma sliders of the Tone Mapping tool in the Exposure tab will become grayed out.
-!TP_WAVELET_TMTYPE;Compression method
-!TP_WAVELET_TON;Toning
-!TP_WBALANCE_PICKER;Pick
-!TP_WBALANCE_TEMPBIAS;AWB temperature bias
-!TP_WBALANCE_TEMPBIAS_TOOLTIP;Allows to alter the computation of the "auto white balance"\nby biasing it towards warmer or cooler temperatures. The bias\nis expressed as a percentage of the computed temperature,\nso that the result is given by "computedTemp + computedTemp * bias".
-!ZOOMPANEL_ZOOMFITCROPSCREEN;Fit crop to screen\nShortcut: f
diff --git a/rtdata/languages/Slovak b/rtdata/languages/Slovak
deleted file mode 100644
index 1ecca79e1..000000000
--- a/rtdata/languages/Slovak
+++ /dev/null
@@ -1,2332 +0,0 @@
-#01 2008-05-08
-#02 2009-02-01
-#03 2010-10-23 slapo
-
-BATCHQUEUE_AUTOSTART;Auto štart
-BATCHQUEUE_AUTOSTARTHINT;Začať spracovanie automaticky, keď príde nová úloha
-BATCH_PROCESSING;Dávkové spracovanie
-CURVEEDITOR_CUSTOM;Vlastné
-CURVEEDITOR_DARKS;Tiene
-CURVEEDITOR_HIGHLIGHTS;Najvyššie svetlá
-CURVEEDITOR_LIGHTS;Svetlá
-CURVEEDITOR_LINEAR;Lineárna
-CURVEEDITOR_LOADDLGLABEL;Načítať krivku...
-CURVEEDITOR_NURBS;Kontrolná klietka
-CURVEEDITOR_PARAMETRIC;Parametricky
-CURVEEDITOR_SAVEDLGLABEL;Uložiť krivku...
-CURVEEDITOR_SHADOWS;Hlboké tiene
-CURVEEDITOR_TOOLTIPLINEAR;Resetovať krivku na lineárnu
-CURVEEDITOR_TOOLTIPLOAD;Načítať krivku zo súboru
-CURVEEDITOR_TOOLTIPSAVE;Uložiť súčasnú krivku
-CURVEEDITOR_TYPE;Typ:
-DIRBROWSER_FOLDERS;Priečinky
-EXIFFILTER_APERTURE;Clona
-EXIFFILTER_CAMERA;Fotoaparát
-EXIFFILTER_FOCALLEN;Ohnisková vzdialenosť
-EXIFFILTER_ISO;ISO
-EXIFFILTER_LENS;Objektív
-EXIFFILTER_METADATAFILTER;Povoliť filtre meta údajov
-EXIFFILTER_SHUTTER;Uzávierka
-EXIFPANEL_ADDEDIT;Pridať/Upraviť
-EXIFPANEL_ADDEDITHINT;Pridať novú značku alebo upraviť značku
-EXIFPANEL_ADDTAGDLG_ENTERVALUE;Vložiť hodnotu
-EXIFPANEL_ADDTAGDLG_SELECTTAG;Vybrať značku
-EXIFPANEL_ADDTAGDLG_TITLE;Pridať/Upraviť značku
-EXIFPANEL_KEEP;Ponechať
-EXIFPANEL_KEEPHINT;Ponechať vybrané značky pri písaní výstupného súboru
-EXIFPANEL_REMOVE;Odstrániť
-EXIFPANEL_REMOVEHINT;Odstrániť vybrané značky pri písaní výstupného súboru
-EXIFPANEL_RESET;Resetovať
-EXIFPANEL_RESETALL;Resetovať všetky
-EXIFPANEL_RESETALLHINT;Resetovať všetky značky na ich pôvodné hodnoty
-EXIFPANEL_RESETHINT;Resetovať vybrané značky na ich pôvodné hodnoty
-EXIFPANEL_SUBDIRECTORY;Podadresár
-FILEBROWSER_ADDDELTEMPLATE;Pridať/Odstrániť šablóny...
-FILEBROWSER_APPLYPROFILE;Použiť profil
-FILEBROWSER_CLEARPROFILE;Vyčistiť profil
-FILEBROWSER_COPYPROFILE;Kopírovať profil
-FILEBROWSER_CURRENT_NAME;Súčasný názov:
-FILEBROWSER_DELETEDLGLABEL;Potvrdenie odstránenia súboru
-FILEBROWSER_DELETEDLGMSG;Ste si istí, že chcete odstrániť vybrané %1 súbory?
-FILEBROWSER_EMPTYTRASH;Vyprázdniť kôš
-FILEBROWSER_EMPTYTRASHHINT;Permanentne odstrániť súbory z koša
-FILEBROWSER_NEW_NAME;Nový názov:
-FILEBROWSER_PARTIALPASTEPROFILE;Čiastočné vloženie
-FILEBROWSER_PASTEPROFILE;Vložiť profil
-FILEBROWSER_POPUPCANCELJOB;Zrušiť úlohu
-FILEBROWSER_POPUPMOVEEND;Presunúť na koniec radu
-FILEBROWSER_POPUPMOVEHEAD;Presunúť na začiatok radu
-FILEBROWSER_POPUPOPEN;Otvoriť
-FILEBROWSER_POPUPOPENINEDITOR;Otvoriť v editore
-FILEBROWSER_POPUPPROCESS;Vložiť do radu na spracovanie
-FILEBROWSER_POPUPREMOVE;Odstrániť zo systému súborov
-FILEBROWSER_POPUPRENAME;Premenovať
-FILEBROWSER_POPUPSELECTALL;Vybrať všetko
-FILEBROWSER_POPUPTRASH;Presunúť do koša
-FILEBROWSER_POPUPUNRANK;Zrušiť triedu
-FILEBROWSER_POPUPUNTRASH;Odstrániť z koša
-FILEBROWSER_RENAMEDLGLABEL;Premenovať súbor
-FILEBROWSER_SHOWDIRHINT;Ukázať všetky obrázky v adresári
-FILEBROWSER_SHOWEXIFINFO;Ukázať EXIF info i
-FILEBROWSER_SHOWRANK1HINT;Ukázať obrázky triedy 1 hviezda
-FILEBROWSER_SHOWRANK2HINT;Ukázať obrázky triedy 2 hviezda
-FILEBROWSER_SHOWRANK3HINT;Ukázať obrázky triedy 3 hviezda
-FILEBROWSER_SHOWRANK4HINT;Ukázať obrázky triedy 4 hviezda
-FILEBROWSER_SHOWRANK5HINT;Ukázať obrázky triedy 5 hviezda
-FILEBROWSER_SHOWTRASHHINT;Zobraziť obsah koša
-FILEBROWSER_SHOWUNRANKHINT;Zobraziť obrázky bez triedy
-FILEBROWSER_THUMBSIZE;Veľkosť zmenšenín
-FILEBROWSER_ZOOMINHINT;Zväčšiť veľkosť zmenšenín
-FILEBROWSER_ZOOMOUTHINT;Zmenšiť veľkosť zmenšenín
-GENERAL_ABOUT;O programe
-GENERAL_AFTER;Potom
-GENERAL_BEFORE;Predtým
-GENERAL_CANCEL;Zrušiť
-GENERAL_DISABLE;Zakázať
-GENERAL_DISABLED;Zakázané
-GENERAL_ENABLE;Povoliť
-GENERAL_ENABLED;Povolené
-GENERAL_LANDSCAPE;Krajina
-GENERAL_NA;n/a
-GENERAL_NO;Nie
-GENERAL_OK;OK
-GENERAL_PORTRAIT;Portrét
-GENERAL_SAVE;Uložiť
-GENERAL_UNCHANGED;(Nezmenené)
-HISTOGRAM_TOOLTIP_B;Zobraziť/Schovať MODRÝ histogram
-HISTOGRAM_TOOLTIP_G;Zobraziť/Schovať ZELENÝ histogram
-HISTOGRAM_TOOLTIP_L;Zobraziť/Schovať histogram CIELAB svietivosti
-HISTOGRAM_TOOLTIP_R;Zobraziť/Schovať ČERVENÝ histogram
-HISTORY_CHANGED;Zmenené
-HISTORY_CUSTOMCURVE;Vlastná krivka
-HISTORY_FROMCLIPBOARD;Zo schránky
-HISTORY_LABEL;História
-HISTORY_MSG_1;Fotka načítaná
-HISTORY_MSG_2;Profil načítaný
-HISTORY_MSG_3;Profil zmenený
-HISTORY_MSG_4;História prehliadania
-HISTORY_MSG_5;Jas
-HISTORY_MSG_6;Kontrast
-HISTORY_MSG_7;Čierna
-HISTORY_MSG_8;Kompenzácia expozície
-HISTORY_MSG_9;Kompresia najvyšších svetiel
-HISTORY_MSG_10;Kompresia tieňov
-HISTORY_MSG_11;Krivka tónov
-HISTORY_MSG_12;Auto expozícia
-HISTORY_MSG_13;Orezávanie expozície
-HISTORY_MSG_14;Jas svietivosti
-HISTORY_MSG_15;Kontrast svietivosti
-HISTORY_MSG_16;Čierna svietivosti
-HISTORY_MSG_17;Kompresia najvyšších svetiel v oblasti svietivosti
-HISTORY_MSG_18;Kompresia tieňov v oblasti svietivosti
-HISTORY_MSG_19;Krivka svietivosti
-HISTORY_MSG_20;Doostrenie
-HISTORY_MSG_21;Polomer doostrenia
-HISTORY_MSG_22;Množstvo doostrenia
-HISTORY_MSG_23;Prah doostrenia
-HISTORY_MSG_24;Doostriť len okraje
-HISTORY_MSG_25;Polomer detekcie okrajov pri doostrení
-HISTORY_MSG_26;Tolerancia okrajov pri doostrení
-HISTORY_MSG_27;Kontrola svätožiary pri doostrení
-HISTORY_MSG_28;Množstvo kontroly svätožiary
-HISTORY_MSG_29;Doostrovacia metóda
-HISTORY_MSG_30;Polomer dekonvolúcie
-HISTORY_MSG_31;Množstvo dekonvolúcie
-HISTORY_MSG_32;Tlmenie dekonvolúcie
-HISTORY_MSG_33;Iterácie dekonvolúcie
-HISTORY_MSG_34;Vyhnúť sa orezaniu farieb
-HISTORY_MSG_35;Obmedzovač sýtosti
-HISTORY_MSG_36;Hranica sýtosti
-HISTORY_MSG_37;Zosilnenie farieb
-HISTORY_MSG_38;Metóda vyváženia bielej
-HISTORY_MSG_39;Farebná teplota
-HISTORY_MSG_40;Nádych vyváženia bielej
-HISTORY_MSG_41;Farebný posun "A"
-HISTORY_MSG_42;Farebný posun "B"
-HISTORY_MSG_43;Odšumenie svietivosti
-HISTORY_MSG_44;Polomer odšumenia svietivosti
-HISTORY_MSG_45;Tolerancia okrajov odšumenia svietivosti
-HISTORY_MSG_46;Farebné odšumenie
-HISTORY_MSG_47;Polomer farebného odšumenia
-HISTORY_MSG_48;Tolerancia okrajov farebného odšumenia
-HISTORY_MSG_49;Citlivosť na okraje pri farebnom odšumení
-HISTORY_MSG_50;Nástroj Tiene/Najvyššie svetlá
-HISTORY_MSG_51;Zosilnenie najvyšších svetiel
-HISTORY_MSG_52;Zosilnenie tieňov
-HISTORY_MSG_53;Tonálna šírka najvyšších svetiel
-HISTORY_MSG_54;Tonálna šírka tieňov
-HISTORY_MSG_55;Miestny kontrast
-HISTORY_MSG_56;Polomer Tiene/Najvyššie svetlá
-HISTORY_MSG_57;Hrubé otočenie
-HISTORY_MSG_58;Horizontálne preklápanie
-HISTORY_MSG_59;Vertikálne preklápanie
-HISTORY_MSG_60;Otočenie
-HISTORY_MSG_61;Otočenie
-HISTORY_MSG_62;Korekcia zakrivenia objektívu
-HISTORY_MSG_63;Záložka vybraná
-HISTORY_MSG_64;Orezanie fotky
-HISTORY_MSG_65;Korekcia chromatickej aberácie
-HISTORY_MSG_66;Obnova najvyšších svetiel
-HISTORY_MSG_67;Množstvo obnovy najvyšších svetiel
-HISTORY_MSG_68;Metóda obnovy najvyšších svetiel
-HISTORY_MSG_69;Pracovný farebný priestor
-HISTORY_MSG_70;Výstupný farebný priestor
-HISTORY_MSG_71;Vstupný farebný priestor
-HISTORY_MSG_72;Korekcia vignetácie
-HISTORY_MSG_73;Mixér kanálov
-HISTORY_MSG_74;Zmeniť veľkosť - Rozmer
-HISTORY_MSG_75;Zmeniť veľkosť - Metóda
-HISTORY_MSG_76;Exif Metadáta
-HISTORY_MSG_77;IPTC Metadáta
-HISTORY_MSG_78;Zadané údaje pre zmenu veľkosti
-HISTORY_MSG_79;Zmena veľkosti podľa šírky
-HISTORY_MSG_80;Zmena veľkosti podľa výšky
-HISTORY_MSG_81;Zmena veľkosti povolená
-HISTORY_MSG_82;Profil zmenený
-HISTORY_MSG_83;Tiene/najvyšie svetlá vyskokej kvality
-HISTORY_MSG_84;Náprava perspektívy
-HISTORY_MSG_85;Koeficienty vlnky
-HISTORY_MSG_86;Vyrovnávač vlnky
-HISTORY_MSG_87;Impulzná redukcia šumu
-HISTORY_MSG_89;Smerová pyramída
-HISTORY_MSG_90;Svietivosť smerovej pyramídy
-HISTORY_MSG_91;Farebnosť smerovej pyramídy
-HISTORY_MSG_92;Gamma smerovej pyramídy
-HISTORY_NEWSNAPSHOT;Nový Snímok
-HISTORY_SNAPSHOT;Snímok
-HISTORY_SNAPSHOTS;Snímky
-IPTCPANEL_CATEGORY;Kategória
-IPTCPANEL_CITY;Mesto
-IPTCPANEL_COPYHINT;Kopírovať IPTC nastavenia do schránky
-IPTCPANEL_COUNTRY;Krajina
-IPTCPANEL_CREDIT;Kredit
-IPTCPANEL_CREDITHINT;Identifikuje poskytovateľa obrázka, nemusí byť nevyhnutne vlastníkom/tvorcom (Kredit).
-IPTCPANEL_DATECREATED;Dátum vytvorenia
-IPTCPANEL_EMBEDDED;Vložené
-IPTCPANEL_EMBEDDEDHINT;Resetovať na IPTV údaje vložené do obrázka
-IPTCPANEL_HEADLINE;Nadpis
-IPTCPANEL_INSTRUCTIONS;Pokyny
-IPTCPANEL_KEYWORDS;Kľúčové slová
-IPTCPANEL_PASTEHINT;Prilepiť IPTC nastavenia zo schránky
-IPTCPANEL_RESET;Resetovať
-IPTCPANEL_RESETHINT;Resetovať na predvolené profilom
-IPTCPANEL_SOURCE;Zdroj
-IPTCPANEL_TITLE;Názov
-MAIN_BUTTON_FULLSCREEN;Celá obrazovka
-MAIN_BUTTON_PREFERENCES;Predvoľby
-MAIN_BUTTON_PUTTOQUEUE;Vložiť do radu
-MAIN_BUTTON_PUTTOQUEUE_TOOLTIP;Pridať súčasný obrázok do radu na spracovanie Ctrl+B
-MAIN_BUTTON_SAVE;Uložiť obrázok
-MAIN_BUTTON_SAVE_TOOLTIP;Uložiť súčasný obrázok Ctrl+S
-MAIN_BUTTON_SENDTOEDITOR;Odoslať do editora
-MAIN_BUTTON_SENDTOEDITOR_TOOLTIP;Upraviť súčasný obrázok v externom editore Ctrl+E
-MAIN_BUTTON_UNFULLSCREEN;Ukončiť zobrazenie na celú obrazovku
-MAIN_FRAME_BATCHQUEUE;Dávkový rad
-MAIN_FRAME_FILEBROWSER;Prehliadač súborov
-MAIN_FRAME_PLACES;Miesta
-MAIN_FRAME_PLACES_ADD;Pridať
-MAIN_FRAME_RECENT;Nedávne priečinky
-MAIN_MSG_ALREADYEXISTS;Súbor už existuje.
-MAIN_MSG_CANNOTLOAD;Nemôžem načítať obrázok
-MAIN_MSG_CANNOTSAVE;Chyba pri ukladaní súboru
-MAIN_MSG_CANNOTSTARTEDITOR;Nebolo možné spustiť editor.
-MAIN_MSG_CANNOTSTARTEDITOR_SECONDARY;Prosím, nastavte správnu cestu v dialógu "Predvoľby".
-MAIN_MSG_NAVIGATOR;Navigátor
-MAIN_MSG_QOVERWRITE;Chcete ho prepísať?
-MAIN_TAB_COLOR;Farba
-MAIN_TAB_DETAIL;Detail
-MAIN_TAB_DEVELOP;Vyvinúť
-MAIN_TAB_EXIF;Exif
-MAIN_TAB_EXPOSURE;Expozícia
-MAIN_TAB_FILTER;Filter
-MAIN_TAB_IPTC;IPTC
-MAIN_TAB_METADATA;Metadáta
-MAIN_TAB_TRANSFORM;Transformácie
-MAIN_TOOLTIP_HIDEHP;Zobraziť/ukázať ľavý panel (vrátane histórie, shortcut key: H)
-MAIN_TOOLTIP_INDCLIPPEDH;Indikácia orezania najvyšších svetiel
-MAIN_TOOLTIP_INDCLIPPEDS;Indikácia orezania tieňov
-MAIN_TOOLTIP_QINFO;Rýchle informácie o obrázku
-MAIN_TOOLTIP_TOGGLE;Prepnúť pohľad predtým/potom B
-NAVIGATOR_XY_NA;x = n/a, y = n/a
-PARTIALPASTE_BASICGROUP;Základné nastavenia
-PARTIALPASTE_CACORRECTION;Korekcia C/A
-PARTIALPASTE_COARSETRANS;90° otočenie/preklopenie
-PARTIALPASTE_COLORGROUP;Nastavenia súvisiace s farbou
-PARTIALPASTE_COMPOSITIONGROUP;Nastavenia kompozície
-PARTIALPASTE_CROP;Orez
-PARTIALPASTE_DIALOGLABEL;Profil spracovania čiastočného vloženia
-PARTIALPASTE_DISTORTION;Korekcia skreslenia
-PARTIALPASTE_EXIFCHANGES;Zmeny v EXIF údajochChanges to exif data
-PARTIALPASTE_EXPOSURE;Expozícia
-PARTIALPASTE_ICMSETTINGS;Nastavenia ICM
-PARTIALPASTE_IPTCINFO;IPTC informácie
-PARTIALPASTE_LABCURVE;Krivka svietivosti
-PARTIALPASTE_LENSGROUP;Nastavenia súvisiace s objektívom
-PARTIALPASTE_METAGROUP;Nastavenia metadát
-PARTIALPASTE_RESIZE;Zmeniť veľkosť
-PARTIALPASTE_ROTATION;Otočenie
-PARTIALPASTE_SHADOWSHIGHLIGHTS;Tiene/Najvyššie svetlá
-PARTIALPASTE_SHARPENING;Doostrenie
-PARTIALPASTE_VIGNETTING;Korekcia vignetácie
-PARTIALPASTE_WHITEBALANCE;Vyváženie bielej
-PREFERENCES_ADD;Pridať
-PREFERENCES_APPLNEXTSTARTUP;Aplikovaný pri ďalšom spustení
-PREFERENCES_BATCH_PROCESSING;dávkové spracovanie
-PREFERENCES_BEHAVIOR;Správanie sa
-PREFERENCES_CACHEMAXENTRIES;Maximálny počet vstupov v cache
-PREFERENCES_CACHEOPTS;Možnosti cache
-PREFERENCES_CACHETHUMBHEIGHT;Maximálna výška zmenšenín
-PREFERENCES_CLIPPINGIND;Indikácia orezu
-PREFERENCES_DATEFORMAT;Formát dátumu
-PREFERENCES_DATEFORMATHINT;Môžete použiť nasledujúce formátovacie reťazce:\n%y : rok\n%m : mesiac\n%d : deň\n\nNapríklad, slovenský formát je:\n%d.%m.%y
-PREFERENCES_DIRHOME;Domovský adresár
-PREFERENCES_DIRLAST;Posledný navštívený adresár
-PREFERENCES_DIROTHER;Iný
-PREFERENCES_DIRSELECTDLG;Vybrať adresár s obrázkami pri spustení...
-PREFERENCES_DIRSOFTWARE;Inštalačný adresár
-PREFERENCES_EDITORLAYOUT;Rozloženie editora
-PREFERENCES_EXTERNALEDITOR;Externý editor
-PREFERENCES_FBROWSEROPTS;Voľby prehliadača súborov
-PREFERENCES_FILEFORMAT;Formát súborov
-PREFERENCES_FORIMAGE;Pre obrazové súbory
-PREFERENCES_FORRAW;Pre RAW súbory
-PREFERENCES_GIMPPATH;Inštalačný adresár GIMPu
-PREFERENCES_HLTHRESHOLD;Prah pre orezanie najvyšších svetiel
-PREFERENCES_ICCDIR;Adresár s ICC profilmy
-PREFERENCES_IMPROCPARAMS;Predvolené parametre spracovania obrazu
-PREFERENCES_INTENT_ABSOLUTE;Absolútny kolorimetrický
-PREFERENCES_INTENT_PERCEPTUAL;Vnímaný
-PREFERENCES_INTENT_RELATIVE;Relatívny kolorimetrický
-PREFERENCES_INTENT_SATURATION;Sýtosť
-PREFERENCES_MULTITAB;Režim viacerých kariet
-PREFERENCES_OUTDIR;Výstupný adresár
-PREFERENCES_OUTDIRFOLDER;Uložiť do adresára
-PREFERENCES_OUTDIRFOLDERHINT;Uložiť obrázky do vybraného adresára
-PREFERENCES_OUTDIRTEMPLATE;Použiť šablónu
-PREFERENCES_OUTDIRTEMPLATEHINT;Môžete použiť nasledujúce formátovacie reťazce:\n%f, %d1, %d2, ..., %p1, %p2, ...\n\nTieto formátovacie reťazce odkazujú na adresáre a časti cesty k raw súboru.\n\nNapríklad, ak bol /home/tom/image/02-09-2006/dsc0012.nefotvorený, význam formátovacích reťazcov je:\n%f=dsc0012, %d1=02-09-2006, %d2=image, ...\n%p1=/home/tom/image/02-09-2006, %p2=/home/tom/image, p3=/home/tom, ...\n\nIf you want to save the output image where the original is, write:\n%p1/%f\n\nIf you want to save the output image in a directory 'converted' located the directory of the original, write:\n%p1/converted/%f\n\nAk chcete uložiť výstupný obraz tam, kde je originál, napíšte:\n%p1/%f\n\nAk chcete uložiť výstupný obraz v adresári 'converted' nachádzajúcom sa v adresári s originálom, napíšte:\n%p1/converted/%f\n\nAk chcete uložiť výstupný obraz v adresári '/home/tom/converted' pri zachovaní toho istého podadresára s dátumami, napíšte:\n%p2/converted/%d1/%f
-PREFERENCES_OVERLAY_FILENAMES;Prekryť mená súborov cez zmenšeniny
-PREFERENCES_PARSEDEXT;Spracúvané prípony
-PREFERENCES_PARSEDEXTADD;Pridať príponu
-PREFERENCES_PARSEDEXTADDHINT;Napíšte príponu a stlačte tento gombík pre pripojenie k zoznamu
-PREFERENCES_PARSEDEXTDELHINT;Odstrániť vybranú príponu zo zoznamu
-PREFERENCES_PROFILEHANDLING;Zaobchádzanie s profilom spracovania
-PREFERENCES_PROFILELOADPR;Priorita načítavania profilu
-PREFERENCES_PROFILEPRCACHE;Profil v cache
-PREFERENCES_PROFILEPRFILE;Profil pri vstupnom súbore
-PREFERENCES_PROFILESAVECACHE;Uložiť parametre spracovania do cache
-PREFERENCES_PROFILESAVEINPUT;Uložiť parametre spracovania k vstupnému súboru
-PREFERENCES_PROPERTY;Vlastnosť
-PREFERENCES_PSPATH;Inštalačný adresár Adobe Photoshop
-PREFERENCES_SELECTLANG;Vybrať si jazyk
-PREFERENCES_SET;Nastaviť
-PREFERENCES_SHOWBASICEXIF;Zobrazovať základné EXIF informácie
-PREFERENCES_SHOWDATETIME;Ukázovať dátum a čas
-PREFERENCES_SHTHRESHOLD;Prah pre orezané tiene
-PREFERENCES_SINGLETAB;Režim jednej karty
-PREFERENCES_STARTUPIMDIR;Adresár s obrázkami pri spustení
-PREFERENCES_TAB_BROWSER;Prehliadač súborov
-PREFERENCES_TAB_COLORMGR;Správa farieb
-PREFERENCES_TAB_GENERAL;Všeobecné
-PREFERENCES_TAB_IMPROC;Spracovanie obrazu
-PREFERENCES_WORKFLOW;Tok práce
-PROFILEPANEL_LABEL;Profily spracovania
-PROFILEPANEL_LOADDLGLABEL;Načítať parametre spracovania...
-PROFILEPANEL_PCUSTOM;Vlastné
-PROFILEPANEL_PFILE;Zo súboru
-PROFILEPANEL_PLASTSAVED;Posledné uložené
-PROFILEPANEL_SAVEDLGLABEL;Uložiť parametre spracovania...
-PROFILEPANEL_TOOLTIPCOPY;Kopírovať súčasný profil do schránky
-PROFILEPANEL_TOOLTIPLOAD;Načítať profil zo súboru
-PROFILEPANEL_TOOLTIPPASTE;Vložiť profil zo schránky
-PROFILEPANEL_TOOLTIPSAVE;Uložiť súčasný profil
-PROGRESSBAR_LOADING;Načítavam obrázok...
-PROGRESSBAR_LOADJPEG;Ukladám JPEG súbor...
-PROGRESSBAR_LOADPNG;Ukladám PNG súbor...
-PROGRESSBAR_LOADTIFF;Ukladám TIFF súbor...
-PROGRESSBAR_PROCESSING;Spracúvam obrázok...
-PROGRESSBAR_READY;Pripravený
-PROGRESSBAR_SAVEJPEG;Ukladám JPEG súbor...
-PROGRESSBAR_SAVEPNG;Ukladám PNG súbor...
-PROGRESSBAR_SAVETIFF;Ukladám TIFF súbor...
-PROGRESSDLG_PROFILECHANGEDINBROWSER;Profil zmenený v prehliadači
-QINFO_ISO;ISO
-QINFO_NOEXIF;Exif údaje sú nedostupné.
-SAVEDLG_AUTOSUFFIX;Automaticky pridať príponu, ak už súbor existuje
-SAVEDLG_FILEFORMAT;Formát súboru
-SAVEDLG_JPEGQUAL;JPEG Kvalita
-SAVEDLG_PNGCOMPR;PNG Kompresia
-SAVEDLG_PUTTOQUEUE;Vložiť do radu na spracovanie
-SAVEDLG_PUTTOQUEUEHEAD;Presunúť na čelo radu na spracovanie
-SAVEDLG_PUTTOQUEUETAIL;Presunúť na koniec radu na spracovanie
-SAVEDLG_SAVEIMMEDIATELY;Uložiť okamžite
-SAVEDLG_SAVESPP;Uložiť parametre spracovania s obrázkom
-SAVEDLG_TIFFUNCOMPRESSED;Nekomprimovaný TIFF
-TOOLBAR_TOOLTIP_CROP;Orezanie výberu (shortcut key: C)
-TOOLBAR_TOOLTIP_HAND;Nástroj ruka (shortcut key: N)
-TOOLBAR_TOOLTIP_STRAIGHTEN;Výber rovnej čiary (shortcut key: S)
-TOOLBAR_TOOLTIP_WB;Bodové vyváženie bielej (shortcut key: W)
-TP_CACORRECTION_BLUE;Modrá
-TP_CACORRECTION_LABEL;Korekcia chromatickej aberácie
-TP_CACORRECTION_RED;Červená
-TP_CHMIXER_BLUE;Modrá
-TP_CHMIXER_GREEN;Zelená
-TP_CHMIXER_LABEL;Mixér kanálov
-TP_CHMIXER_RED;Červená
-TP_COARSETRAF_TOOLTIP_HFLIP;Prevrátiť horizontálne
-TP_COARSETRAF_TOOLTIP_ROTLEFT;Otočiť doľava
-TP_COARSETRAF_TOOLTIP_ROTRIGHT;Otočiť doprava
-TP_COARSETRAF_TOOLTIP_VFLIP;Prevrátiť vertikálne
-TP_CROP_FIXRATIO;Pevný pomer:
-TP_CROP_GTDIAGONALS;Pravidlo diagonál
-TP_CROP_GTNONE;Žiadne
-TP_CROP_GTRULETHIRDS;Pravidlo tretín
-TP_CROP_GUIDETYPE;Type vodidiel:
-TP_CROP_H;V
-TP_CROP_LABEL;Orezanie
-TP_CROP_W;Š
-TP_CROP_X;x
-TP_CROP_Y;y
-TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Farebnosť
-TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Svietivosť
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_LABEL;Redukcia šumu pomocou smerovej pyramídy
-TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
-TP_DIRPYREQUALIZER_LABEL;Vyrovnávač smerovej pyramídy
-TP_DIRPYREQUALIZER_LUMACOARSEST;Najhrubšie
-TP_DIRPYREQUALIZER_LUMACONTRAST_MINUS;Kontrast-
-TP_DIRPYREQUALIZER_LUMACONTRAST_PLUS;Kontrast+
-TP_DIRPYREQUALIZER_LUMAFINEST;Najjemnejšie
-TP_DIRPYREQUALIZER_LUMANEUTRAL;Neutrálne
-TP_DIRPYREQUALIZER_THRESHOLD;Threshold
-TP_DISTORTION_AMOUNT;Množstvo
-TP_DISTORTION_LABEL;Zakrivenie
-TP_EXPOSURE_AUTOLEVELS;Auto úrovne
-TP_EXPOSURE_BLACKLEVEL;Čierna
-TP_EXPOSURE_BRIGHTNESS;Jas
-TP_EXPOSURE_CLIP;Orezať
-TP_EXPOSURE_COMPRHIGHLIGHTS;Kompresia najvyšších svetiel
-TP_EXPOSURE_COMPRSHADOWS;Kompresia tieňov
-TP_EXPOSURE_CONTRAST;Kontrast
-TP_EXPOSURE_CURVEEDITOR;Krivka tónov
-TP_EXPOSURE_EXPCOMP;Kompenzácia expozície
-TP_EXPOSURE_LABEL;Expozícia
-TP_HLREC_CIELAB;CIELab Blending
-TP_HLREC_COLOR;Šírenie farieb
-TP_HLREC_LABEL;Obnova najvyšších svetiel
-TP_HLREC_LUMINANCE;Obnova svietivosti
-TP_HLREC_METHOD;Metóda:
-TP_ICM_INPUTCAMERA;Predvolený aparátu
-TP_ICM_INPUTCUSTOM;Vlastný
-TP_ICM_INPUTDLGLABEL;Vybrať vstupný ICC profil...
-TP_ICM_INPUTEMBEDDED;Použiť vstavaný, ak je to možné
-TP_ICM_INPUTPROFILE;Vstupný profil
-TP_ICM_LABEL;ICM
-TP_ICM_NOICM;Bez správy farieb: sRGB výstup
-TP_ICM_OUTPUTPROFILE;Výstupný profil
-TP_ICM_WORKINGPROFILE;Pracovný profil
-TP_IMPULSEDENOISE_LABEL;Impulzná redukcia šumu
-TP_IMPULSEDENOISE_THRESH;Prah
-TP_LABCURVE_BRIGHTNESS;Jas
-TP_LABCURVE_CONTRAST;Kontrast
-TP_LABCURVE_CURVEEDITOR;Krivka svietivosti
-TP_LABCURVE_LABEL;Krivka svietivosti
-TP_LENSGEOM_AUTOCROP;Automatické orezanie
-TP_LENSGEOM_FILL;Automatické vyplnenie
-TP_LENSGEOM_LABEL;Objektív/Geometria
-TP_PERSPECTIVE_HORIZONTAL;Horizontálne
-TP_PERSPECTIVE_LABEL;Perspektíva
-TP_PERSPECTIVE_VERTICAL;Vertikálne
-TP_PREPROCESS_GREENEQUIL;Vyvažovanie zelenej
-TP_PREPROCESS_LINEDENOISE;Filter šumu vedenia
-TP_RAWCACORR_AUTO;Použiť automatickú úpravu CA
-TP_RAW_DCBENHANCE;Použiť vylepšovací krok DCB
-TP_RAW_DCBITERATIONS;Počet iterácií DCB
-TP_RAW_DMETHOD;Metóda
-TP_RAW_FALSECOLOR;Kroky potlačenia chybných farieb
-TP_RESIZE_H;V:
-TP_RESIZE_HEIGHT;Výška
-TP_RESIZE_LABEL;Zmeniť veľkosť
-TP_RESIZE_METHOD;Metóda:
-TP_RESIZE_NEAREST;Najbližšie
-TP_RESIZE_SCALE;Pomer
-TP_RESIZE_SPECIFY;Zadať:
-TP_RESIZE_W;Š:
-TP_RESIZE_WIDTH;Šírka
-TP_ROTATE_DEGREE;Stupeň
-TP_ROTATE_LABEL;Otočiť
-TP_ROTATE_SELECTLINE;Vybrať rovnú čiaru
-TP_SHADOWSHLIGHTS_HIGHLIGHTS;Najvyššie svetlá
-TP_SHADOWSHLIGHTS_HLTONALW;Tonálna šírka
-TP_SHADOWSHLIGHTS_LABEL;Tiene/Najvyššie svetlá
-TP_SHADOWSHLIGHTS_LOCALCONTR;Miestny kontrast
-TP_SHADOWSHLIGHTS_RADIUS;Polomer
-TP_SHADOWSHLIGHTS_SHADOWS;Tiene
-TP_SHADOWSHLIGHTS_SHTONALW;Tonálna šírka
-TP_SHARPENING_AMOUNT;Množstvo
-TP_SHARPENING_EDRADIUS;Polomer
-TP_SHARPENING_EDTOLERANCE;Tolerancia okrajov
-TP_SHARPENING_HALOCONTROL;Kontrola svätožiary
-TP_SHARPENING_HCAMOUNT;Množstvo
-TP_SHARPENING_LABEL;Doostrenie
-TP_SHARPENING_METHOD;Metóda
-TP_SHARPENING_ONLYEDGES;Doostriť len okraje
-TP_SHARPENING_RADIUS;Polomer
-TP_SHARPENING_RLD;RL Dekonvolúcia
-TP_SHARPENING_RLD_AMOUNT;Množstvo
-TP_SHARPENING_RLD_DAMPING;Tlmenie
-TP_SHARPENING_RLD_ITERATIONS;Iterácie
-TP_SHARPENING_THRESHOLD;Prah
-TP_SHARPENING_USM;Unsharp Mask
-TP_VIGNETTING_AMOUNT;Množstvo
-TP_VIGNETTING_LABEL;Korekcia vignetácie
-TP_VIGNETTING_RADIUS;Polomer
-TP_WBALANCE_AUTO;Automatické
-TP_WBALANCE_CAMERA;Fotoaparát
-TP_WBALANCE_CUSTOM;Vlastné
-TP_WBALANCE_GREEN;Nádych
-TP_WBALANCE_LABEL;Vyváženie bielej
-TP_WBALANCE_METHOD;Metóda
-TP_WBALANCE_SIZE;Veľkosť:
-TP_WBALANCE_SPOTWB;Bodové VB
-TP_WBALANCE_TEMPERATURE;Teplota
-ZOOMPANEL_100;(100%)
-ZOOMPANEL_NEWCROPWINDOW;Otvoriť (nové) okno s detailom
-ZOOMPANEL_ZOOM100;Priblíženie na 100% z
-ZOOMPANEL_ZOOMFITSCREEN;Prispôsobiť obrazovke Alt-f
-ZOOMPANEL_ZOOMIN;Priblížiť +
-ZOOMPANEL_ZOOMOUT;Oddialiť -
-
-!!!!!!!!!!!!!!!!!!!!!!!!!
-! Untranslated keys follow; remove the ! prefix after an entry is translated.
-!!!!!!!!!!!!!!!!!!!!!!!!!
-
-!ABOUT_TAB_BUILD;Version
-!ABOUT_TAB_CREDITS;Credits
-!ABOUT_TAB_LICENSE;License
-!ABOUT_TAB_RELEASENOTES;Release Notes
-!ABOUT_TAB_SPLASH;Splash
-!ADJUSTER_RESET_TO_DEFAULT;Click - reset to default value.\nCtrl+click - reset to initial value.
-!BATCHQUEUE_DESTFILENAME;Path and file name
-!BATCHQUEUE_STARTSTOPHINT;Start or stop processing the images in the queue.\n\nShortcut: Ctrl+s
-!CURVEEDITOR_AXIS_IN;I:
-!CURVEEDITOR_AXIS_LEFT_TAN;LT:
-!CURVEEDITOR_AXIS_OUT;O:
-!CURVEEDITOR_AXIS_RIGHT_TAN;RT:
-!CURVEEDITOR_CATMULLROM;Flexible
-!CURVEEDITOR_CURVE;Curve
-!CURVEEDITOR_CURVES;Curves
-!CURVEEDITOR_EDITPOINT_HINT;Enable edition of node in/out values.\n\nRight-click on a node to select it.\nRight-click on empty space to de-select the node.
-!CURVEEDITOR_MINMAXCPOINTS;Equalizer
-!CURVEEDITOR_TOOLTIPCOPY;Copy current curve to clipboard.
-!CURVEEDITOR_TOOLTIPPASTE;Paste curve from clipboard.
-!DONT_SHOW_AGAIN;Don't show this message again.
-!DYNPROFILEEDITOR_DELETE;Delete
-!DYNPROFILEEDITOR_EDIT;Edit
-!DYNPROFILEEDITOR_EDIT_RULE;Edit Dynamic Profile Rule
-!DYNPROFILEEDITOR_ENTRY_TOOLTIP;The matching is case insensitive.\nUse the "re:" prefix to enter\na regular expression.
-!DYNPROFILEEDITOR_IMGTYPE_ANY;Any
-!DYNPROFILEEDITOR_IMGTYPE_HDR;HDR
-!DYNPROFILEEDITOR_IMGTYPE_PS;Pixel Shift
-!DYNPROFILEEDITOR_IMGTYPE_STD;Standard
-!DYNPROFILEEDITOR_MOVE_DOWN;Move Down
-!DYNPROFILEEDITOR_MOVE_UP;Move Up
-!DYNPROFILEEDITOR_NEW;New
-!DYNPROFILEEDITOR_NEW_RULE;New Dynamic Profile Rule
-!DYNPROFILEEDITOR_PROFILE;Processing Profile
-!EDITWINDOW_TITLE;Image Edit
-!EDIT_OBJECT_TOOLTIP;Displays a widget on the preview window which lets you adjust this tool.
-!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
-!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
-!EXIFFILTER_FILETYPE;File type
-!EXIFFILTER_IMAGETYPE;Image type
-!EXIFPANEL_SHOWALL;Show all
-!EXPORT_BYPASS;Processing steps to bypass
-!EXPORT_BYPASS_ALL;Select / Unselect All
-!EXPORT_BYPASS_DEFRINGE;Bypass Defringe
-!EXPORT_BYPASS_DIRPYRDENOISE;Bypass Noise Reduction
-!EXPORT_BYPASS_DIRPYREQUALIZER;Bypass Contrast by Detail Levels
-!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
-!EXPORT_BYPASS_RAW_CA;Bypass [raw] Chromatic Aberration Correction
-!EXPORT_BYPASS_RAW_CCSTEPS;Bypass [raw] False Color Suppression
-!EXPORT_BYPASS_RAW_DCB_ENHANCE;Bypass [raw] DCB Enhancement Steps
-!EXPORT_BYPASS_RAW_DCB_ITERATIONS;Bypass [raw] DCB Iterations
-!EXPORT_BYPASS_RAW_DF;Bypass [raw] Dark-Frame
-!EXPORT_BYPASS_RAW_FF;Bypass [raw] Flat-Field
-!EXPORT_BYPASS_RAW_GREENTHRESH;Bypass [raw] Green Equilibration
-!EXPORT_BYPASS_RAW_LINENOISE;Bypass [raw] Line Noise Filter
-!EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Bypass [raw] LMMSE Enhancement Steps
-!EXPORT_BYPASS_SHARPENEDGE;Bypass Edge Sharpening
-!EXPORT_BYPASS_SHARPENING;Bypass Sharpening
-!EXPORT_BYPASS_SHARPENMICRO;Bypass Microcontrast
-!EXPORT_BYPASS_SH_HQ;Bypass Sharp Mask Shadows/Highlights
-!EXPORT_FASTEXPORTOPTIONS;Fast Export Options
-!EXPORT_INSTRUCTIONS;Fast Export options provide overrides to bypass time and resource consuming development settings and to run queue processing using the fast export settings instead. This method is recommended for quicker generation of lower resolution images when speed is a priority or when resized output is desired for one or many images without making modifications to their saved development parameters.
-!EXPORT_MAXHEIGHT;Maximum height:
-!EXPORT_MAXWIDTH;Maximum width:
-!EXPORT_PIPELINE;Processing pipeline
-!EXPORT_PUTTOQUEUEFAST; Put to queue for fast export
-!EXPORT_RAW_DMETHOD;Demosaic method
-!EXPORT_USE_FAST_PIPELINE;Dedicated (full processing on resized image)
-!EXPORT_USE_FAST_PIPELINE_TIP;Use a dedicated processing pipeline for images in Fast Export mode, that trades speed for quality. Resizing of the image is done as early as possible, instead of doing it at the end like in the normal pipeline. The speedup can be significant, but be prepared to see artifacts and a general degradation of output quality.
-!EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
-!EXTPROGTARGET_1;raw
-!EXTPROGTARGET_2;queue-processed
-!FILEBROWSER_APPLYPROFILE_PARTIAL;Apply - partial
-!FILEBROWSER_AUTODARKFRAME;Auto dark-frame
-!FILEBROWSER_AUTOFLATFIELD;Auto flat-field
-!FILEBROWSER_BROWSEPATHBUTTONHINT;Click to open specified path, reload folder and apply "find" keywords.
-!FILEBROWSER_BROWSEPATHHINT;Type a path to navigate to.\n\nKeyboard shortcuts:\nCtrl-o to focus to the path text box.\nEnter / Ctrl-Enter to browse there;\nEsc to clear changes.\nShift-Esc to remove focus.\n\nPath shortcuts:\n~ - user's home directory.\n! - user's pictures directory
-!FILEBROWSER_CACHE;Cache
-!FILEBROWSER_CACHECLEARFROMFULL;Clear all including cached profiles
-!FILEBROWSER_CACHECLEARFROMPARTIAL;Clear all except cached profiles
-!FILEBROWSER_COLORLABEL_TOOLTIP;Color label.\n\nUse dropdown menu or shortcuts:\nShift-Ctrl-0 No Color\nShift-Ctrl-1 Red\nShift-Ctrl-2 Yellow\nShift-Ctrl-3 Green\nShift-Ctrl-4 Blue\nShift-Ctrl-5 Purple
-!FILEBROWSER_DARKFRAME;Dark-frame
-!FILEBROWSER_DELETEDLGMSGINCLPROC;Are you sure you want to delete the selected %1 files including a queue-processed version?
-!FILEBROWSER_EXTPROGMENU;Open with
-!FILEBROWSER_FLATFIELD;Flat-Field
-!FILEBROWSER_MOVETODARKFDIR;Move to dark-frames directory
-!FILEBROWSER_MOVETOFLATFIELDDIR;Move to flat-fields directory
-!FILEBROWSER_OPENDEFAULTVIEWER;Windows default viewer (queue-processed)
-!FILEBROWSER_POPUPCOLORLABEL;Color label
-!FILEBROWSER_POPUPCOLORLABEL0;Label: None
-!FILEBROWSER_POPUPCOLORLABEL1;Label: Red
-!FILEBROWSER_POPUPCOLORLABEL2;Label: Yellow
-!FILEBROWSER_POPUPCOLORLABEL3;Label: Green
-!FILEBROWSER_POPUPCOLORLABEL4;Label: Blue
-!FILEBROWSER_POPUPCOLORLABEL5;Label: Purple
-!FILEBROWSER_POPUPCOPYTO;Copy to...
-!FILEBROWSER_POPUPFILEOPERATIONS;File operations
-!FILEBROWSER_POPUPMOVETO;Move to...
-!FILEBROWSER_POPUPPROCESSFAST;Put to queue (Fast export)
-!FILEBROWSER_POPUPPROFILEOPERATIONS;Processing profile operations
-!FILEBROWSER_POPUPRANK;Rank
-!FILEBROWSER_POPUPRANK0;Unrank
-!FILEBROWSER_POPUPRANK1;Rank 1 *
-!FILEBROWSER_POPUPRANK2;Rank 2 **
-!FILEBROWSER_POPUPRANK3;Rank 3 ***
-!FILEBROWSER_POPUPRANK4;Rank 4 ****
-!FILEBROWSER_POPUPRANK5;Rank 5 *****
-!FILEBROWSER_POPUPREMOVEINCLPROC;Delete with output from queue
-!FILEBROWSER_QUERYBUTTONHINT;Clear the Find query
-!FILEBROWSER_QUERYHINT;Type filenames to search for. Supports partial filenames. Separate the search terms using commas, e.g.\n1001,1004,1199\n\nExclude search terms by prefixing them with !=\ne.g.\n!=1001,1004,1199\n\nShortcuts:\nCtrl-f - focus the Find box,\nEnter - search,\nEsc - clear the Find box,\nShift-Esc - defocus the Find box.
-!FILEBROWSER_QUERYLABEL; Find:
-!FILEBROWSER_RANK1_TOOLTIP;Rank 1 *\nShortcut: Shift-1
-!FILEBROWSER_RANK2_TOOLTIP;Rank 2 *\nShortcut: Shift-2
-!FILEBROWSER_RANK3_TOOLTIP;Rank 3 *\nShortcut: Shift-3
-!FILEBROWSER_RANK4_TOOLTIP;Rank 4 *\nShortcut: Shift-4
-!FILEBROWSER_RANK5_TOOLTIP;Rank 5 *\nShortcut: Shift-5
-!FILEBROWSER_RESETDEFAULTPROFILE;Reset to default
-!FILEBROWSER_SELECTDARKFRAME;Select dark-frame...
-!FILEBROWSER_SELECTFLATFIELD;Select flat-field...
-!FILEBROWSER_SHOWCOLORLABEL1HINT;Show images labeled Red.\nShortcut: Alt-1
-!FILEBROWSER_SHOWCOLORLABEL2HINT;Show images labeled Yellow.\nShortcut: Alt-2
-!FILEBROWSER_SHOWCOLORLABEL3HINT;Show images labeled Green.\nShortcut: Alt-3
-!FILEBROWSER_SHOWCOLORLABEL4HINT;Show images labeled Blue.\nShortcut: Alt-4
-!FILEBROWSER_SHOWCOLORLABEL5HINT;Show images labeled Purple.\nShortcut: Alt-5
-!FILEBROWSER_SHOWEDITEDHINT;Show edited images.\nShortcut: 7
-!FILEBROWSER_SHOWEDITEDNOTHINT;Show not edited images.\nShortcut: 6
-!FILEBROWSER_SHOWNOTTRASHHINT;Show only non-deleted images.
-!FILEBROWSER_SHOWORIGINALHINT;Show only original images.\n\nWhen several images exist with the same filename but different extensions, the one considered original is the one whose extension is nearest the top of the parsed extensions list in Preferences > File Browser > Parsed Extensions.
-!FILEBROWSER_SHOWRECENTLYSAVEDHINT;Show saved images.\nShortcut: Alt-7
-!FILEBROWSER_SHOWRECENTLYSAVEDNOTHINT;Show unsaved images.\nShortcut: Alt-6
-!FILEBROWSER_SHOWUNCOLORHINT;Show images without a color label.\nShortcut: Alt-0
-!FILEBROWSER_UNRANK_TOOLTIP;Unrank.\nShortcut: Shift-0
-!FILECHOOSER_FILTER_ANY;All files
-!FILECHOOSER_FILTER_COLPROF;Color profiles (*.icc)
-!FILECHOOSER_FILTER_CURVE;Curve files
-!FILECHOOSER_FILTER_LCP;Lens correction profiles
-!FILECHOOSER_FILTER_PP;Processing profiles
-!FILECHOOSER_FILTER_SAME;Same format as current photo
-!FILECHOOSER_FILTER_TIFF;TIFF files
-!GENERAL_APPLY;Apply
-!GENERAL_ASIMAGE;As Image
-!GENERAL_AUTO;Automatic
-!GENERAL_CLOSE;Close
-!GENERAL_CURRENT;Current
-!GENERAL_FILE;File
-!GENERAL_NONE;None
-!GENERAL_OPEN;Open
-!GENERAL_RESET;Reset
-!GENERAL_SAVE_AS;Save as...
-!GENERAL_SLIDER;Slider
-!GENERAL_WARNING;Warning
-!GIMP_PLUGIN_INFO;Welcome to the RawTherapee GIMP plugin!\nOnce you are done editing, simply close the main RawTherapee window and the image will be automatically imported in GIMP.
-!HISTOGRAM_TOOLTIP_BAR;Show/Hide RGB indicator bar.
-!HISTOGRAM_TOOLTIP_CHRO;Show/Hide chromaticity histogram.
-!HISTOGRAM_TOOLTIP_MODE;Toggle between linear, log-linear and log-log scaling of the histogram.
-!HISTOGRAM_TOOLTIP_RAW;Show/Hide raw histogram.
-!HISTORY_MSG_88;Impulse NR threshold
-!HISTORY_MSG_93;CbDL - Value
-!HISTORY_MSG_94;Contrast by Detail Levels
-!HISTORY_MSG_95;L*a*b* - Chromaticity
-!HISTORY_MSG_96;L*a*b* - a* curve
-!HISTORY_MSG_97;L*a*b* - b* curve
-!HISTORY_MSG_98;Demosaicing method
-!HISTORY_MSG_99;Hot pixel filter
-!HISTORY_MSG_100;Exposure - Saturation
-!HISTORY_MSG_101;HSV - Hue
-!HISTORY_MSG_102;HSV - Saturation
-!HISTORY_MSG_103;HSV - Value
-!HISTORY_MSG_104;HSV Equalizer
-!HISTORY_MSG_105;Defringe
-!HISTORY_MSG_106;Defringe - Radius
-!HISTORY_MSG_107;Defringe - Threshold
-!HISTORY_MSG_108;Exposure - HLC threshold
-!HISTORY_MSG_109;Resize - Bounding box
-!HISTORY_MSG_110;Resize - Applies to
-!HISTORY_MSG_111;L*a*b* - Avoid color shift
-!HISTORY_MSG_112;--unused--
-!HISTORY_MSG_113;L*a*b* - Red/skin prot.
-!HISTORY_MSG_114;DCB iterations
-!HISTORY_MSG_115;False color suppression
-!HISTORY_MSG_116;DCB enhancement
-!HISTORY_MSG_117;Raw CA correction - Red
-!HISTORY_MSG_118;Raw CA correction - Blue
-!HISTORY_MSG_119;Line noise filter
-!HISTORY_MSG_120;Green equilibration
-!HISTORY_MSG_121;Raw CA Correction - Auto
-!HISTORY_MSG_122;Dark-Frame - Auto-selection
-!HISTORY_MSG_123;Dark-Frame - File
-!HISTORY_MSG_124;White point correction
-!HISTORY_MSG_126;Flat-Field - File
-!HISTORY_MSG_127;Flat-Field - Auto-selection
-!HISTORY_MSG_128;Flat-Field - Blur radius
-!HISTORY_MSG_129;Flat-Field - Blur type
-!HISTORY_MSG_130;Auto distortion correction
-!HISTORY_MSG_131;NR - Luma
-!HISTORY_MSG_132;NR - Chroma
-!HISTORY_MSG_133;Output gamma
-!HISTORY_MSG_134;Free gamma
-!HISTORY_MSG_135;Free gamma
-!HISTORY_MSG_136;Free gamma slope
-!HISTORY_MSG_137;Black level - Green 1
-!HISTORY_MSG_138;Black level - Red
-!HISTORY_MSG_139;Black level - Blue
-!HISTORY_MSG_140;Black level - Green 2
-!HISTORY_MSG_141;Black level - Link greens
-!HISTORY_MSG_142;ES - Iterations
-!HISTORY_MSG_143;ES - Quantity
-!HISTORY_MSG_144;Microcontrast - Quantity
-!HISTORY_MSG_145;Microcontrast - Uniformity
-!HISTORY_MSG_146;Edge sharpening
-!HISTORY_MSG_147;ES - Luminance only
-!HISTORY_MSG_148;Microcontrast
-!HISTORY_MSG_149;Microcontrast - 3×3 matrix
-!HISTORY_MSG_150;Post-demosaic artifact/noise red.
-!HISTORY_MSG_151;Vibrance
-!HISTORY_MSG_152;Vib - Pastel tones
-!HISTORY_MSG_153;Vib - Saturated tones
-!HISTORY_MSG_154;Vib - Protect skin-tones
-!HISTORY_MSG_155;Vib - Avoid color shift
-!HISTORY_MSG_156;Vib - Link pastel/saturated
-!HISTORY_MSG_157;Vib - P/S threshold
-!HISTORY_MSG_158;TM - Strength
-!HISTORY_MSG_159;TM - Edge stopping
-!HISTORY_MSG_160;TM - Scale
-!HISTORY_MSG_161;TM - Reweighting iterates
-!HISTORY_MSG_162;Tone Mapping
-!HISTORY_MSG_163;RGB Curves - Red
-!HISTORY_MSG_164;RGB Curves - Green
-!HISTORY_MSG_165;RGB Curves - Blue
-!HISTORY_MSG_166;Exposure - Reset
-!HISTORY_MSG_167;Demosaicing method
-!HISTORY_MSG_168;L*a*b* - CC curve
-!HISTORY_MSG_169;L*a*b* - CH curve
-!HISTORY_MSG_170;Vibrance - HH curve
-!HISTORY_MSG_171;L*a*b* - LC curve
-!HISTORY_MSG_172;L*a*b* - Restrict LC
-!HISTORY_MSG_173;NR - Detail recovery
-!HISTORY_MSG_174;CIECAM02
-!HISTORY_MSG_175;CAM02 - CAT02 adaptation
-!HISTORY_MSG_176;CAM02 - Viewing surround
-!HISTORY_MSG_177;CAM02 - Scene luminosity
-!HISTORY_MSG_178;CAM02 - Viewing luminosity
-!HISTORY_MSG_179;CAM02 - White-point model
-!HISTORY_MSG_180;CAM02 - Lightness (J)
-!HISTORY_MSG_181;CAM02 - Chroma (C)
-!HISTORY_MSG_182;CAM02 - Automatic CAT02
-!HISTORY_MSG_183;CAM02 - Contrast (J)
-!HISTORY_MSG_184;CAM02 - Scene surround
-!HISTORY_MSG_185;CAM02 - Gamut control
-!HISTORY_MSG_186;CAM02 - Algorithm
-!HISTORY_MSG_187;CAM02 - Red/skin prot.
-!HISTORY_MSG_188;CAM02 - Brightness (Q)
-!HISTORY_MSG_189;CAM02 - Contrast (Q)
-!HISTORY_MSG_190;CAM02 - Saturation (S)
-!HISTORY_MSG_191;CAM02 - Colorfulness (M)
-!HISTORY_MSG_192;CAM02 - Hue (h)
-!HISTORY_MSG_193;CAM02 - Tone curve 1
-!HISTORY_MSG_194;CAM02 - Tone curve 2
-!HISTORY_MSG_195;CAM02 - Tone curve 1
-!HISTORY_MSG_196;CAM02 - Tone curve 2
-!HISTORY_MSG_197;CAM02 - Color curve
-!HISTORY_MSG_198;CAM02 - Color curve
-!HISTORY_MSG_199;CAM02 - Output histograms
-!HISTORY_MSG_200;CAM02 - Tone mapping
-!HISTORY_MSG_201;NR - Chrominance - R&G
-!HISTORY_MSG_202;NR - Chrominance - B&Y
-!HISTORY_MSG_203;NR - Color space
-!HISTORY_MSG_204;LMMSE enhancement steps
-!HISTORY_MSG_205;CAM02 - Hot/bad pixel filter
-!HISTORY_MSG_206;CAT02 - Auto scene luminosity
-!HISTORY_MSG_207;Defringe - Hue curve
-!HISTORY_MSG_208;WB - B/R equalizer
-!HISTORY_MSG_210;GF - Angle
-!HISTORY_MSG_211;Graduated Filter
-!HISTORY_MSG_212;VF - Strength
-!HISTORY_MSG_213;Vignette Filter
-!HISTORY_MSG_214;Black-and-White
-!HISTORY_MSG_215;B&W - CM - Red
-!HISTORY_MSG_216;B&W - CM - Green
-!HISTORY_MSG_217;B&W - CM - Blue
-!HISTORY_MSG_218;B&W - Gamma - Red
-!HISTORY_MSG_219;B&W - Gamma - Green
-!HISTORY_MSG_220;B&W - Gamma - Blue
-!HISTORY_MSG_221;B&W - Color filter
-!HISTORY_MSG_222;B&W - Presets
-!HISTORY_MSG_223;B&W - CM - Orange
-!HISTORY_MSG_224;B&W - CM - Yellow
-!HISTORY_MSG_225;B&W - CM - Cyan
-!HISTORY_MSG_226;B&W - CM - Magenta
-!HISTORY_MSG_227;B&W - CM - Purple
-!HISTORY_MSG_228;B&W - Luminance equalizer
-!HISTORY_MSG_229;B&W - Luminance equalizer
-!HISTORY_MSG_230;B&W - Mode
-!HISTORY_MSG_231;B&W - 'Before' curve
-!HISTORY_MSG_232;B&W - 'Before' curve type
-!HISTORY_MSG_233;B&W - 'After' curve
-!HISTORY_MSG_234;B&W - 'After' curve type
-!HISTORY_MSG_235;B&W - CM - Auto
-!HISTORY_MSG_236;--unused--
-!HISTORY_MSG_237;B&W - CM
-!HISTORY_MSG_238;GF - Feather
-!HISTORY_MSG_239;GF - Strength
-!HISTORY_MSG_240;GF - Center
-!HISTORY_MSG_241;VF - Feather
-!HISTORY_MSG_242;VF - Roundness
-!HISTORY_MSG_243;VC - Radius
-!HISTORY_MSG_244;VC - Strength
-!HISTORY_MSG_245;VC - Center
-!HISTORY_MSG_246;L*a*b* - CL curve
-!HISTORY_MSG_247;L*a*b* - LH curve
-!HISTORY_MSG_248;L*a*b* - HH curve
-!HISTORY_MSG_249;CbDL - Threshold
-!HISTORY_MSG_250;NR - Enhanced
-!HISTORY_MSG_251;B&W - Algorithm
-!HISTORY_MSG_252;CbDL - Skin tar/prot
-!HISTORY_MSG_253;CbDL - Reduce artifacts
-!HISTORY_MSG_254;CbDL - Skin hue
-!HISTORY_MSG_255;NR - Median filter
-!HISTORY_MSG_256;NR - Median - Type
-!HISTORY_MSG_257;Color Toning
-!HISTORY_MSG_258;CT - Color curve
-!HISTORY_MSG_259;CT - Opacity curve
-!HISTORY_MSG_260;CT - a*[b*] opacity
-!HISTORY_MSG_261;CT - Method
-!HISTORY_MSG_262;CT - b* opacity
-!HISTORY_MSG_263;CT - Shadows - Red
-!HISTORY_MSG_264;CT - Shadows - Green
-!HISTORY_MSG_265;CT - Shadows - Blue
-!HISTORY_MSG_266;CT - Mid - Red
-!HISTORY_MSG_267;CT - Mid - Green
-!HISTORY_MSG_268;CT - Mid - Blue
-!HISTORY_MSG_269;CT - High - Red
-!HISTORY_MSG_270;CT - High - Green
-!HISTORY_MSG_271;CT - High - Blue
-!HISTORY_MSG_272;CT - Balance
-!HISTORY_MSG_273;CT - Color Balance SMH
-!HISTORY_MSG_274;CT - Sat. Shadows
-!HISTORY_MSG_275;CT - Sat. Highlights
-!HISTORY_MSG_276;CT - Opacity
-!HISTORY_MSG_277;--unused--
-!HISTORY_MSG_278;CT - Preserve luminance
-!HISTORY_MSG_279;CT - Shadows
-!HISTORY_MSG_280;CT - Highlights
-!HISTORY_MSG_281;CT - Sat. strength
-!HISTORY_MSG_282;CT - Sat. threshold
-!HISTORY_MSG_283;CT - Strength
-!HISTORY_MSG_284;CT - Auto sat. protection
-!HISTORY_MSG_285;NR - Median - Method
-!HISTORY_MSG_286;NR - Median - Type
-!HISTORY_MSG_287;NR - Median - Iterations
-!HISTORY_MSG_288;Flat-Field - Clip control
-!HISTORY_MSG_289;Flat-Field - Clip control - Auto
-!HISTORY_MSG_290;Black Level - Red
-!HISTORY_MSG_291;Black Level - Green
-!HISTORY_MSG_292;Black Level - Blue
-!HISTORY_MSG_293;Film Simulation
-!HISTORY_MSG_294;Film Simulation - Strength
-!HISTORY_MSG_295;Film Simulation - Film
-!HISTORY_MSG_296;NR - Luminance curve
-!HISTORY_MSG_297;NR - Mode
-!HISTORY_MSG_298;Dead pixel filter
-!HISTORY_MSG_299;NR - Chrominance curve
-!HISTORY_MSG_300;-
-!HISTORY_MSG_301;NR - Luma control
-!HISTORY_MSG_302;NR - Chroma method
-!HISTORY_MSG_303;NR - Chroma method
-!HISTORY_MSG_304;W - Contrast levels
-!HISTORY_MSG_305;Wavelet Levels
-!HISTORY_MSG_306;W - Process
-!HISTORY_MSG_307;W - Process
-!HISTORY_MSG_308;W - Process direction
-!HISTORY_MSG_309;W - ES - Detail
-!HISTORY_MSG_310;W - Residual - Sky tar/prot
-!HISTORY_MSG_311;W - Wavelet levels
-!HISTORY_MSG_312;W - Residual - Shadows threshold
-!HISTORY_MSG_313;W - Chroma - Sat/past
-!HISTORY_MSG_314;W - Gamut - Reduce artifacts
-!HISTORY_MSG_315;W - Residual - Contrast
-!HISTORY_MSG_316;W - Gamut - Skin tar/prot
-!HISTORY_MSG_317;W - Gamut - Skin hue
-!HISTORY_MSG_318;W - Contrast - Highlight levels
-!HISTORY_MSG_319;W - Contrast - Highlight range
-!HISTORY_MSG_320;W - Contrast - Shadow range
-!HISTORY_MSG_321;W - Contrast - Shadow levels
-!HISTORY_MSG_322;W - Gamut - Avoid color shift
-!HISTORY_MSG_323;W - ES - Local contrast
-!HISTORY_MSG_324;W - Chroma - Pastel
-!HISTORY_MSG_325;W - Chroma - Saturated
-!HISTORY_MSG_326;W - Chroma - Method
-!HISTORY_MSG_327;W - Contrast - Apply to
-!HISTORY_MSG_328;W - Chroma - Link strength
-!HISTORY_MSG_329;W - Toning - Opacity RG
-!HISTORY_MSG_330;W - Toning - Opacity BY
-!HISTORY_MSG_331;W - Contrast levels - Extra
-!HISTORY_MSG_332;W - Tiling method
-!HISTORY_MSG_333;W - Residual - Shadows
-!HISTORY_MSG_334;W - Residual - Chroma
-!HISTORY_MSG_335;W - Residual - Highlights
-!HISTORY_MSG_336;W - Residual - Highlights threshold
-!HISTORY_MSG_337;W - Residual - Sky hue
-!HISTORY_MSG_338;W - ES - Radius
-!HISTORY_MSG_339;W - ES - Strength
-!HISTORY_MSG_340;W - Strength
-!HISTORY_MSG_341;W - Edge performance
-!HISTORY_MSG_342;W - ES - First level
-!HISTORY_MSG_343;W - Chroma levels
-!HISTORY_MSG_344;W - Meth chroma sl/cur
-!HISTORY_MSG_345;W - ES - Local contrast
-!HISTORY_MSG_346;W - ES - Local contrast method
-!HISTORY_MSG_347;W - Denoise - Level 1
-!HISTORY_MSG_348;W - Denoise - Level 2
-!HISTORY_MSG_349;W - Denoise - Level 3
-!HISTORY_MSG_350;W - ES - Edge detection
-!HISTORY_MSG_351;W - Residual - HH curve
-!HISTORY_MSG_352;W - Background
-!HISTORY_MSG_353;W - ES - Gradient sensitivity
-!HISTORY_MSG_354;W - ES - Enhanced
-!HISTORY_MSG_355;W - ES - Threshold low
-!HISTORY_MSG_356;W - ES - Threshold high
-!HISTORY_MSG_357;W - Denoise - Link with ES
-!HISTORY_MSG_358;W - Gamut - CH
-!HISTORY_MSG_359;Hot/Dead - Threshold
-!HISTORY_MSG_360;TM - Gamma
-!HISTORY_MSG_361;W - Final - Chroma balance
-!HISTORY_MSG_362;W - Residual - Compression method
-!HISTORY_MSG_363;W - Residual - Compression strength
-!HISTORY_MSG_364;W - Final - Contrast balance
-!HISTORY_MSG_365;W - Final - Delta balance
-!HISTORY_MSG_366;W - Residual - Compression gamma
-!HISTORY_MSG_367;W - Final - 'After' contrast curve
-!HISTORY_MSG_368;W - Final - Contrast balance
-!HISTORY_MSG_369;W - Final - Balance method
-!HISTORY_MSG_370;W - Final - Local contrast curve
-!HISTORY_MSG_371;Post-Resize Sharpening
-!HISTORY_MSG_372;PRS USM - Radius
-!HISTORY_MSG_373;PRS USM - Amount
-!HISTORY_MSG_374;PRS USM - Threshold
-!HISTORY_MSG_375;PRS USM - Sharpen only edges
-!HISTORY_MSG_376;PRS USM - Edge detection radius
-!HISTORY_MSG_377;PRS USM - Edge tolerance
-!HISTORY_MSG_378;PRS USM - Halo control
-!HISTORY_MSG_379;PRS USM - Halo control amount
-!HISTORY_MSG_380;PRS - Method
-!HISTORY_MSG_381;PRS RLD - Radius
-!HISTORY_MSG_382;PRS RLD - Amount
-!HISTORY_MSG_383;PRS RLD - Damping
-!HISTORY_MSG_384;PRS RLD - Iterations
-!HISTORY_MSG_385;W - Residual - Color Balance
-!HISTORY_MSG_386;W - Residual - CB green high
-!HISTORY_MSG_387;W - Residual - CB blue high
-!HISTORY_MSG_388;W - Residual - CB green mid
-!HISTORY_MSG_389;W - Residual - CB blue mid
-!HISTORY_MSG_390;W - Residual - CB green low
-!HISTORY_MSG_391;W - Residual - CB blue low
-!HISTORY_MSG_392;W - Residual - Color Balance
-!HISTORY_MSG_393;DCP - Look table
-!HISTORY_MSG_394;DCP - Baseline exposure
-!HISTORY_MSG_395;DCP - Base table
-!HISTORY_MSG_396;W - Contrast sub-tool
-!HISTORY_MSG_397;W - Chroma sub-tool
-!HISTORY_MSG_398;W - ES sub-tool
-!HISTORY_MSG_399;W - Residual sub-tool
-!HISTORY_MSG_400;W - Final sub-tool
-!HISTORY_MSG_401;W - Toning sub-tool
-!HISTORY_MSG_402;W - Denoise sub-tool
-!HISTORY_MSG_403;W - ES - Edge sensitivity
-!HISTORY_MSG_404;W - ES - Base amplification
-!HISTORY_MSG_405;W - Denoise - Level 4
-!HISTORY_MSG_406;W - ES - Neighboring pixels
-!HISTORY_MSG_407;Retinex - Method
-!HISTORY_MSG_408;Retinex - Radius
-!HISTORY_MSG_409;Retinex - Contrast
-!HISTORY_MSG_410;Retinex - Offset
-!HISTORY_MSG_411;Retinex - Strength
-!HISTORY_MSG_412;Retinex - Gaussian gradient
-!HISTORY_MSG_413;Retinex - Contrast
-!HISTORY_MSG_414;Retinex - Histogram - Lab
-!HISTORY_MSG_415;Retinex - Transmission
-!HISTORY_MSG_416;Retinex
-!HISTORY_MSG_417;Retinex - Transmission median
-!HISTORY_MSG_418;Retinex - Threshold
-!HISTORY_MSG_419;Retinex - Color space
-!HISTORY_MSG_420;Retinex - Histogram - HSL
-!HISTORY_MSG_421;Retinex - Gamma
-!HISTORY_MSG_422;Retinex - Gamma
-!HISTORY_MSG_423;Retinex - Gamma slope
-!HISTORY_MSG_424;Retinex - HL threshold
-!HISTORY_MSG_425;Retinex - Log base
-!HISTORY_MSG_426;Retinex - Hue equalizer
-!HISTORY_MSG_427;Output rendering intent
-!HISTORY_MSG_428;Monitor rendering intent
-!HISTORY_MSG_429;Retinex - Iterations
-!HISTORY_MSG_430;Retinex - Transmission gradient
-!HISTORY_MSG_431;Retinex - Strength gradient
-!HISTORY_MSG_432;Retinex - M - Highlights
-!HISTORY_MSG_433;Retinex - M - Highlights TW
-!HISTORY_MSG_434;Retinex - M - Shadows
-!HISTORY_MSG_435;Retinex - M - Shadows TW
-!HISTORY_MSG_436;Retinex - M - Radius
-!HISTORY_MSG_437;Retinex - M - Method
-!HISTORY_MSG_438;Retinex - M - Equalizer
-!HISTORY_MSG_439;Retinex - Process
-!HISTORY_MSG_440;CbDL - Method
-!HISTORY_MSG_441;Retinex - Gain transmission
-!HISTORY_MSG_442;Retinex - Scale
-!HISTORY_MSG_443;Output black point compensation
-!HISTORY_MSG_444;WB - Temp bias
-!HISTORY_MSG_445;Raw sub-image
-!HISTORY_MSG_449;PS - ISO adaption
-!HISTORY_MSG_452;PS - Show motion
-!HISTORY_MSG_453;PS - Show mask only
-!HISTORY_MSG_457;PS - Check red/blue
-!HISTORY_MSG_462;PS - Check green
-!HISTORY_MSG_464;PS - Blur motion mask
-!HISTORY_MSG_465;PS - Blur radius
-!HISTORY_MSG_468;PS - Fill holes
-!HISTORY_MSG_469;PS - Median
-!HISTORY_MSG_471;PS - Motion correction
-!HISTORY_MSG_472;PS - Smooth transitions
-!HISTORY_MSG_473;PS - Use LMMSE
-!HISTORY_MSG_474;PS - Equalize
-!HISTORY_MSG_475;PS - Equalize channel
-!HISTORY_MSG_476;CAM02 - Temp out
-!HISTORY_MSG_477;CAM02 - Green out
-!HISTORY_MSG_478;CAM02 - Yb out
-!HISTORY_MSG_479;CAM02 - CAT02 adaptation out
-!HISTORY_MSG_480;CAM02 - Automatic CAT02 out
-!HISTORY_MSG_481;CAM02 - Temp scene
-!HISTORY_MSG_482;CAM02 - Green scene
-!HISTORY_MSG_483;CAM02 - Yb scene
-!HISTORY_MSG_484;CAM02 - Auto Yb scene
-!HISTORY_MSG_485;Lens Correction
-!HISTORY_MSG_486;Lens Correction - Camera
-!HISTORY_MSG_487;Lens Correction - Lens
-!HISTORY_MSG_488;Dynamic Range Compression
-!HISTORY_MSG_489;DRC - Detail
-!HISTORY_MSG_490;DRC - Amount
-!HISTORY_MSG_491;White Balance
-!HISTORY_MSG_492;RGB Curves
-!HISTORY_MSG_493;L*a*b* Adjustments
-!HISTORY_MSG_CLAMPOOG;Clip out-of-gamut colors
-!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_AB;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_CHANNEL;CT - Channel
-!HISTORY_MSG_COLORTONING_LABREGION_CHROMATICITYMASK;CT - region C mask
-!HISTORY_MSG_COLORTONING_LABREGION_HUEMASK;CT - H mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESS;CT - Lightness
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESSMASK;CT - L mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIST;CT - List
-!HISTORY_MSG_COLORTONING_LABREGION_MASKBLUR;CT - region mask blur
-!HISTORY_MSG_COLORTONING_LABREGION_OFFSET;CT - region offset
-!HISTORY_MSG_COLORTONING_LABREGION_POWER;CT - region power
-!HISTORY_MSG_COLORTONING_LABREGION_SATURATION;CT - Saturation
-!HISTORY_MSG_COLORTONING_LABREGION_SHOWMASK;CT - region show mask
-!HISTORY_MSG_COLORTONING_LABREGION_SLOPE;CT - region slope
-!HISTORY_MSG_DEHAZE_DEPTH;Dehaze - Depth
-!HISTORY_MSG_DEHAZE_ENABLED;Haze Removal
-!HISTORY_MSG_DEHAZE_SHOW_DEPTH_MAP;Dehaze - Show depth map
-!HISTORY_MSG_DEHAZE_STRENGTH;Dehaze - Strength
-!HISTORY_MSG_DUALDEMOSAIC_AUTO_CONTRAST;Dual demosaic - Auto threshold
-!HISTORY_MSG_DUALDEMOSAIC_CONTRAST;Dual demosaic - Contrast threshold
-!HISTORY_MSG_HISTMATCHING;Auto-matched tone curve
-!HISTORY_MSG_ICM_OUTPUT_PRIMARIES;Output - Primaries
-!HISTORY_MSG_ICM_OUTPUT_TEMP;Output - ICC-v4 illuminant D
-!HISTORY_MSG_ICM_OUTPUT_TYPE;Output - Type
-!HISTORY_MSG_ICM_WORKING_GAMMA;Working - Gamma
-!HISTORY_MSG_ICM_WORKING_SLOPE;Working - Slope
-!HISTORY_MSG_ICM_WORKING_TRC_METHOD;Working - TRC method
-!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
-!HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness
-!HISTORY_MSG_LOCALCONTRAST_ENABLED;Local Contrast
-!HISTORY_MSG_LOCALCONTRAST_LIGHTNESS;Local Contrast - Lightness
-!HISTORY_MSG_LOCALCONTRAST_RADIUS;Local Contrast - Radius
-!HISTORY_MSG_METADATA_MODE;Metadata copy mode
-!HISTORY_MSG_MICROCONTRAST_CONTRAST;Microcontrast - Contrast threshold
-!HISTORY_MSG_PIXELSHIFT_DEMOSAIC;PS - Demosaic method for motion
-!HISTORY_MSG_PREPROCESS_LINEDENOISE_DIRECTION;Line noise filter direction
-!HISTORY_MSG_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!HISTORY_MSG_PRSHARPEN_CONTRAST;PRS - Contrast threshold
-!HISTORY_MSG_RAWCACORR_AUTOIT;Raw CA Correction - Iterations
-!HISTORY_MSG_RAWCACORR_COLORSHIFT;Raw CA Correction - Avoid color shift
-!HISTORY_MSG_RAW_BORDER;Raw border
-!HISTORY_MSG_RESIZE_ALLOWUPSCALING;Resize - Allow upscaling
-!HISTORY_MSG_SHARPENING_BLUR;Sharpening - Blur radius
-!HISTORY_MSG_SHARPENING_CONTRAST;Sharpening - Contrast threshold
-!HISTORY_MSG_SH_COLORSPACE;S/H - Colorspace
-!HISTORY_MSG_SOFTLIGHT_ENABLED;Soft light
-!HISTORY_MSG_SOFTLIGHT_STRENGTH;Soft light - Strength
-!HISTORY_MSG_TM_FATTAL_ANCHOR;DRC - Anchor
-!HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s
-!ICCPROFCREATOR_COPYRIGHT;Copyright:
-!ICCPROFCREATOR_COPYRIGHT_RESET_TOOLTIP;Reset to the default copyright, granted to "RawTherapee, CC0"
-!ICCPROFCREATOR_CUSTOM;Custom
-!ICCPROFCREATOR_DESCRIPTION;Description:
-!ICCPROFCREATOR_DESCRIPTION_ADDPARAM;Append gamma and slope values to the description
-!ICCPROFCREATOR_DESCRIPTION_TOOLTIP;Leave empty to set the default description.
-!ICCPROFCREATOR_GAMMA;Gamma
-!ICCPROFCREATOR_ICCVERSION;ICC version:
-!ICCPROFCREATOR_ILL;Illuminant:
-!ICCPROFCREATOR_ILL_41;D41
-!ICCPROFCREATOR_ILL_50;D50
-!ICCPROFCREATOR_ILL_55;D55
-!ICCPROFCREATOR_ILL_60;D60
-!ICCPROFCREATOR_ILL_65;D65
-!ICCPROFCREATOR_ILL_80;D80
-!ICCPROFCREATOR_ILL_DEF;Default
-!ICCPROFCREATOR_ILL_INC;StdA 2856K
-!ICCPROFCREATOR_ILL_TOOLTIP;You can only set the illuminant for ICC v4 profiles.
-!ICCPROFCREATOR_PRIMARIES;Primaries:
-!ICCPROFCREATOR_PRIM_ACESP0;ACES AP0
-!ICCPROFCREATOR_PRIM_ACESP1;ACES AP1
-!ICCPROFCREATOR_PRIM_ADOBE;Adobe RGB (1998)
-!ICCPROFCREATOR_PRIM_BEST;BestRGB
-!ICCPROFCREATOR_PRIM_BETA;BetaRGB
-!ICCPROFCREATOR_PRIM_BLUX;Blue X
-!ICCPROFCREATOR_PRIM_BLUY;Blue Y
-!ICCPROFCREATOR_PRIM_BRUCE;BruceRGB
-!ICCPROFCREATOR_PRIM_GREX;Green X
-!ICCPROFCREATOR_PRIM_GREY;Green Y
-!ICCPROFCREATOR_PRIM_PROPH;Prophoto
-!ICCPROFCREATOR_PRIM_REC2020;Rec2020
-!ICCPROFCREATOR_PRIM_REDX;Red X
-!ICCPROFCREATOR_PRIM_REDY;Red Y
-!ICCPROFCREATOR_PRIM_SRGB;sRGB
-!ICCPROFCREATOR_PRIM_TOOLTIP;You can only set custom primaries for ICC v4 profiles.
-!ICCPROFCREATOR_PRIM_WIDEG;Widegamut
-!ICCPROFCREATOR_PROF_V2;ICC v2
-!ICCPROFCREATOR_PROF_V4;ICC v4
-!ICCPROFCREATOR_SAVEDIALOG_TITLE;Save ICC profile as...
-!ICCPROFCREATOR_SLOPE;Slope
-!ICCPROFCREATOR_TRC_PRESET;Tone response curve:
-!IPTCPANEL_CATEGORYHINT;Identifies the subject of the image in the opinion of the provider.
-!IPTCPANEL_CITYHINT;Enter the name of the city pictured in this image.
-!IPTCPANEL_COPYRIGHT;Copyright notice
-!IPTCPANEL_COPYRIGHTHINT;Enter a Notice on the current owner of the Copyright for this image, such as ©2008 Jane Doe.
-!IPTCPANEL_COUNTRYHINT;Enter the name of the country pictured in this image.
-!IPTCPANEL_CREATOR;Creator
-!IPTCPANEL_CREATORHINT;Enter the name of the person that created this image.
-!IPTCPANEL_CREATORJOBTITLE;Creator's job title
-!IPTCPANEL_CREATORJOBTITLEHINT;Enter the Job Title of the person listed in the Creator field.
-!IPTCPANEL_DATECREATEDHINT;Enter the Date the image was taken.
-!IPTCPANEL_DESCRIPTION;Description
-!IPTCPANEL_DESCRIPTIONHINT;Enter a "caption" describing the who, what, and why of what is happening in this image, this might include names of people, and/or their role in the action that is taking place within the image.
-!IPTCPANEL_DESCRIPTIONWRITER;Description writer
-!IPTCPANEL_DESCRIPTIONWRITERHINT;Enter the name of the person involved in writing, editing or correcting the description of the image.
-!IPTCPANEL_HEADLINEHINT;Enter a brief publishable synopsis or summary of the contents of the image.
-!IPTCPANEL_INSTRUCTIONSHINT;Enter information about embargoes, or other restrictions not covered by the Copyright field.
-!IPTCPANEL_KEYWORDSHINT;Enter any number of keywords, terms or phrases used to express the subject matter in the image.
-!IPTCPANEL_PROVINCE;Province or state
-!IPTCPANEL_PROVINCEHINT;Enter the name of the province or state pictured in this image.
-!IPTCPANEL_SOURCEHINT;Enter or edit the name of a person or party who has a role in the content supply chain, such as a person or entity from whom you received this image from.
-!IPTCPANEL_SUPPCATEGORIES;Supplemental categories
-!IPTCPANEL_SUPPCATEGORIESHINT;Further refines the subject of the image.
-!IPTCPANEL_TITLEHINT;Enter a short verbal and human readable name for the image, this may be the file name.
-!IPTCPANEL_TRANSREFERENCE;Job ID
-!IPTCPANEL_TRANSREFERENCEHINT;Enter a number or identifier needed for workflow control or tracking.
-!MAIN_BUTTON_ICCPROFCREATOR;ICC Profile Creator
-!MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4
-!MAIN_BUTTON_NAVPREV_TOOLTIP;Navigate to the previous image relative to image opened in the Editor.\nShortcut: Shift-F3\n\nTo navigate to the previous image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F3
-!MAIN_BUTTON_NAVSYNC_TOOLTIP;Synchronize the File Browser or Filmstrip with the Editor to reveal the thumbnail of the currently opened image, and clear any active filters.\nShortcut: x\n\nAs above, but without clearing active filters:\nShortcut: y\n(Note that the thumbnail of the opened image will not be shown if filtered out).
-!MAIN_BUTTON_SHOWHIDESIDEPANELS_TOOLTIP;Show/hide all side panels.\nShortcut: m
-!MAIN_FRAME_BATCHQUEUE_TOOLTIP;Processing queue.\nShortcut: Ctrl-F3
-!MAIN_FRAME_EDITOR;Editor
-!MAIN_FRAME_EDITOR_TOOLTIP;Editor.\nShortcut: Ctrl-F4
-!MAIN_FRAME_FILEBROWSER_TOOLTIP;File browser.\nShortcut: Ctrl-F2
-!MAIN_FRAME_PLACES_DEL;Remove
-!MAIN_MSG_EMPTYFILENAME;Filename unspecified!
-!MAIN_MSG_IMAGEUNPROCESSED;This command requires all selected images to be queue-processed first.
-!MAIN_MSG_OPERATIONCANCELLED;Operation cancelled
-!MAIN_MSG_PATHDOESNTEXIST;The path\n\n%1\n\ndoes not exist. Please set a correct path in Preferences.
-!MAIN_MSG_SETPATHFIRST;You first have to set a target path in Preferences in order to use this function!
-!MAIN_MSG_TOOMANYOPENEDITORS;Too many open editors.\nPlease close an editor to continue.
-!MAIN_MSG_WRITEFAILED;Failed to write\n"%1"\n\nMake sure that the folder exists and that you have write permission to it.
-!MAIN_TAB_ADVANCED;Advanced
-!MAIN_TAB_ADVANCED_TOOLTIP;Shortcut: Alt-w
-!MAIN_TAB_COLOR_TOOLTIP;Shortcut: Alt-c
-!MAIN_TAB_DETAIL_TOOLTIP;Shortcut: Alt-d
-!MAIN_TAB_EXPORT; Fast Export
-!MAIN_TAB_EXPOSURE_TOOLTIP;Shortcut: Alt-e
-!MAIN_TAB_FAVORITES;Favorites
-!MAIN_TAB_FAVORITES_TOOLTIP;Shortcut: Alt-u
-!MAIN_TAB_INSPECT; Inspect
-!MAIN_TAB_METADATA_TOOLTIP;Shortcut: Alt-m
-!MAIN_TAB_RAW;Raw
-!MAIN_TAB_RAW_TOOLTIP;Shortcut: Alt-r
-!MAIN_TAB_TRANSFORM_TOOLTIP;Shortcut: Alt-t
-!MAIN_TOOLTIP_BACKCOLOR0;Background color of the preview: theme-based\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR1;Background color of the preview: black\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR2;Background color of the preview: white\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR3;Background color of the preview: middle grey\nShortcut: 9
-!MAIN_TOOLTIP_BEFOREAFTERLOCK;Lock / Unlock the Before view\n\nLock: keep the Before view unchanged.\nUseful to evaluate the cumulative effect of multiple tools.\nAdditionally, comparisons can be made to any state in the History.\n\nUnlock: the Before view will follow the After view one step behind, showing the image before the effect of the currently used tool.
-!MAIN_TOOLTIP_PREVIEWB;Preview the blue channel.\nShortcut: b
-!MAIN_TOOLTIP_PREVIEWFOCUSMASK;Preview the focus mask.\nShortcut: Shift-f\n\nMore accurate on images with shallow depth of field, low noise and at higher zoom levels.\nZoom out to 10-30% to improve detection accuracy on noisy images.
-!MAIN_TOOLTIP_PREVIEWG;Preview the green channel.\nShortcut: g
-!MAIN_TOOLTIP_PREVIEWL;Preview the luminosity.\nShortcut: v\n\n0.299*R + 0.587*G + 0.114*B
-!MAIN_TOOLTIP_PREVIEWR;Preview the red channel.\nShortcut: r
-!MAIN_TOOLTIP_PREVIEWSHARPMASK;Preview the sharpening contrast mask.\nShortcut: p\n\nOnly works when sharpening is enabled and zoom >= 100%.
-!MAIN_TOOLTIP_SHOWHIDELP1;Show/Hide the left panel.\nShortcut: l
-!MAIN_TOOLTIP_SHOWHIDERP1;Show/Hide the right panel.\nShortcut: Alt-l
-!MAIN_TOOLTIP_SHOWHIDETP1;Show/Hide the top panel.\nShortcut: Shift-l
-!MAIN_TOOLTIP_THRESHOLD;Threshold
-!MONITOR_PROFILE_SYSTEM;System default
-!NAVIGATOR_B;B:
-!NAVIGATOR_G;G:
-!NAVIGATOR_H;H:
-!NAVIGATOR_LAB_A;a*:
-!NAVIGATOR_LAB_B;b*:
-!NAVIGATOR_LAB_L;L*:
-!NAVIGATOR_NA; --
-!NAVIGATOR_R;R:
-!NAVIGATOR_S;S:
-!NAVIGATOR_V;V:
-!NAVIGATOR_XY_FULL;Width: %1, Height: %2
-!OPTIONS_BUNDLED_MISSING;The bundled profile "%1" could not be found!\n\nYour installation could be damaged.\n\nDefault internal values will be used instead.
-!OPTIONS_DEFIMG_MISSING;The default profile for non-raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!OPTIONS_DEFRAW_MISSING;The default profile for raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!PARTIALPASTE_ADVANCEDGROUP;Advanced Settings
-!PARTIALPASTE_CHANNELMIXER;Channel mixer
-!PARTIALPASTE_CHANNELMIXERBW;Black-and-white
-!PARTIALPASTE_COLORAPP;CIECAM02
-!PARTIALPASTE_COLORTONING;Color toning
-!PARTIALPASTE_COMMONTRANSFORMPARAMS;Auto-fill
-!PARTIALPASTE_DARKFRAMEAUTOSELECT;Dark-frame auto-selection
-!PARTIALPASTE_DARKFRAMEFILE;Dark-frame file
-!PARTIALPASTE_DEFRINGE;Defringe
-!PARTIALPASTE_DEHAZE;Haze removal
-!PARTIALPASTE_DETAILGROUP;Detail Settings
-!PARTIALPASTE_DIRPYRDENOISE;Noise reduction
-!PARTIALPASTE_DIRPYREQUALIZER;Contrast by detail levels
-!PARTIALPASTE_EPD;Tone mapping
-!PARTIALPASTE_EQUALIZER;Wavelet levels
-!PARTIALPASTE_EVERYTHING;Everything
-!PARTIALPASTE_FILMSIMULATION;Film simulation
-!PARTIALPASTE_FLATFIELDAUTOSELECT;Flat-field auto-selection
-!PARTIALPASTE_FLATFIELDBLURRADIUS;Flat-field blur radius
-!PARTIALPASTE_FLATFIELDBLURTYPE;Flat-field blur type
-!PARTIALPASTE_FLATFIELDCLIPCONTROL;Flat-field clip control
-!PARTIALPASTE_FLATFIELDFILE;Flat-field file
-!PARTIALPASTE_GRADIENT;Graduated filter
-!PARTIALPASTE_HSVEQUALIZER;HSV equalizer
-!PARTIALPASTE_IMPULSEDENOISE;Impulse noise reduction
-!PARTIALPASTE_LENSPROFILE;Profiled lens correction
-!PARTIALPASTE_LOCALCONTRAST;Local contrast
-!PARTIALPASTE_METADATA;Metadata mode
-!PARTIALPASTE_PCVIGNETTE;Vignette filter
-!PARTIALPASTE_PERSPECTIVE;Perspective
-!PARTIALPASTE_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!PARTIALPASTE_PREPROCESS_GREENEQUIL;Green equilibration
-!PARTIALPASTE_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!PARTIALPASTE_PREPROCESS_LINEDENOISE;Line noise filter
-!PARTIALPASTE_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!PARTIALPASTE_PRSHARPENING;Post-resize sharpening
-!PARTIALPASTE_RAWCACORR_AUTO;CA auto-correction
-!PARTIALPASTE_RAWCACORR_AVOIDCOLORSHIFT;CA avoid color shift
-!PARTIALPASTE_RAWCACORR_CAREDBLUE;CA red & blue
-!PARTIALPASTE_RAWEXPOS_BLACK;Black levels
-!PARTIALPASTE_RAWEXPOS_LINEAR;White point correction
-!PARTIALPASTE_RAWGROUP;Raw Settings
-!PARTIALPASTE_RAW_BORDER;Raw border
-!PARTIALPASTE_RAW_DCBENHANCE;DCB enhancement
-!PARTIALPASTE_RAW_DCBITERATIONS;DCB iterations
-!PARTIALPASTE_RAW_DMETHOD;Demosaic method
-!PARTIALPASTE_RAW_FALSECOLOR;False color suppression
-!PARTIALPASTE_RAW_IMAGENUM;Sub-image
-!PARTIALPASTE_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!PARTIALPASTE_RAW_PIXELSHIFT;Pixel Shift
-!PARTIALPASTE_RETINEX;Retinex
-!PARTIALPASTE_RGBCURVES;RGB curves
-!PARTIALPASTE_SHARPENEDGE;Edges
-!PARTIALPASTE_SHARPENMICRO;Microcontrast
-!PARTIALPASTE_SOFTLIGHT;Soft light
-!PARTIALPASTE_TM_FATTAL;Dynamic range compression
-!PARTIALPASTE_VIBRANCE;Vibrance
-!PREFERENCES_APPEARANCE;Appearance
-!PREFERENCES_APPEARANCE_COLORPICKERFONT;Color picker font
-!PREFERENCES_APPEARANCE_CROPMASKCOLOR;Crop mask color
-!PREFERENCES_APPEARANCE_MAINFONT;Main font
-!PREFERENCES_APPEARANCE_NAVGUIDECOLOR;Navigator guide color
-!PREFERENCES_APPEARANCE_THEME;Theme
-!PREFERENCES_AUTOMONPROFILE;Use operating system's main monitor color profile
-!PREFERENCES_AUTOSAVE_TP_OPEN;Save tool collapsed/expanded state on exit
-!PREFERENCES_BEHADDALL;All to 'Add'
-!PREFERENCES_BEHADDALLHINT;Set all parameters to the Add mode.\nAdjustments of parameters in the batch tool panel will be deltas to the stored values.
-!PREFERENCES_BEHSETALL;All to 'Set'
-!PREFERENCES_BEHSETALLHINT;Set all parameters to the Set mode.\nAdjustments of parameters in the batch tool panel will be absolute, the actual values will be displayed.
-!PREFERENCES_BLACKBODY;Tungsten
-!PREFERENCES_CACHECLEAR;Clear
-!PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
-!PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
-!PREFERENCES_CACHECLEAR_ONLYPROFILES;Clear only cached processing profiles:
-!PREFERENCES_CACHECLEAR_SAFETY;Only files in the cache are cleared. Processing profiles stored alongside the source images are not touched.
-!PREFERENCES_CHUNKSIZES;Tiles per thread
-!PREFERENCES_CHUNKSIZE_RAW_AMAZE;AMaZE demosaic
-!PREFERENCES_CHUNKSIZE_RAW_CA;Raw CA correction
-!PREFERENCES_CHUNKSIZE_RAW_RCD;RCD demosaic
-!PREFERENCES_CHUNKSIZE_RAW_XT;Xtrans demosaic
-!PREFERENCES_CHUNKSIZE_RGB;RGB processing
-!PREFERENCES_CLUTSCACHE;HaldCLUT Cache
-!PREFERENCES_CLUTSCACHE_LABEL;Maximum number of cached CLUTs
-!PREFERENCES_CLUTSDIR;HaldCLUT directory
-!PREFERENCES_CMMBPC;Black point compensation
-!PREFERENCES_CROP;Crop Editing
-!PREFERENCES_CROP_AUTO_FIT;Automatically zoom to fit the crop
-!PREFERENCES_CROP_GUIDES;Guides shown when not editing the crop
-!PREFERENCES_CROP_GUIDES_FRAME;Frame
-!PREFERENCES_CROP_GUIDES_FULL;Original
-!PREFERENCES_CROP_GUIDES_NONE;None
-!PREFERENCES_CURVEBBOXPOS;Position of curve copy & paste buttons
-!PREFERENCES_CURVEBBOXPOS_ABOVE;Above
-!PREFERENCES_CURVEBBOXPOS_BELOW;Below
-!PREFERENCES_CURVEBBOXPOS_LEFT;Left
-!PREFERENCES_CURVEBBOXPOS_RIGHT;Right
-!PREFERENCES_CUSTPROFBUILD;Custom Processing Profile Builder
-!PREFERENCES_CUSTPROFBUILDHINT;Executable (or script) file called when a new initial processing profile should be generated for an image.\n\nThe path of the communication file (*.ini style, a.k.a. "Keyfile") is added as a command line parameter. It contains various parameters required for the scripts and image Exif to allow a rules-based processing profile generation.\n\nWARNING: You are responsible for using double quotes where necessary if you're using paths containing spaces.
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys format
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
-!PREFERENCES_CUSTPROFBUILDPATH;Executable path
-!PREFERENCES_D50;Settings in main menu
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_D55;5500K
-!PREFERENCES_D60;6000K
-!PREFERENCES_D65;6500K
-!PREFERENCES_DARKFRAMEFOUND;Found
-!PREFERENCES_DARKFRAMESHOTS;shots
-!PREFERENCES_DARKFRAMETEMPLATES;templates
-!PREFERENCES_DIRDARKFRAMES;Dark-frames directory
-!PREFERENCES_DIRECTORIES;Directories
-!PREFERENCES_EDITORCMDLINE;Custom command line
-!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_FLATFIELDFOUND;Found
-!PREFERENCES_FLATFIELDSDIR;Flat-fields directory
-!PREFERENCES_FLATFIELDSHOTS;shots
-!PREFERENCES_FLATFIELDTEMPLATES;templates
-!PREFERENCES_FLUOF2;Fluorescent F2
-!PREFERENCES_FLUOF7;Fluorescent F7
-!PREFERENCES_FLUOF11;Fluorescent F11
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY;Output device's Yb luminance (%)
-!PREFERENCES_GREY05;Yb=05 CIE L#30
-!PREFERENCES_GREY10;Yb=10 CIE L#40
-!PREFERENCES_GREY15;Yb=15 CIE L#45
-!PREFERENCES_GREY18;Settings in main menu
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREY23;Yb=23 CIE L#55
-!PREFERENCES_GREY30;Yb=30 CIE L#60
-!PREFERENCES_GREY40;Yb=40 CIE L#70
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram in left panel
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
-!PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
-!PREFERENCES_INSPECT_LABEL;Inspect
-!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
-!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
-!PREFERENCES_INTERNALTHUMBIFUNTOUCHED;Show embedded JPEG thumbnail if raw is unedited
-!PREFERENCES_LANG;Language
-!PREFERENCES_LANGAUTODETECT;Use system language
-!PREFERENCES_MAXRECENTFOLDERS;Maximum number of recent folders
-!PREFERENCES_MENUGROUPEXTPROGS;Group "Open with"
-!PREFERENCES_MENUGROUPFILEOPERATIONS;Group "File operations"
-!PREFERENCES_MENUGROUPLABEL;Group "Color label"
-!PREFERENCES_MENUGROUPPROFILEOPERATIONS;Group "Processing profile operations"
-!PREFERENCES_MENUGROUPRANK;Group "Rank"
-!PREFERENCES_MENUOPTIONS;Context Menu Options
-!PREFERENCES_METADATA;Metadata
-!PREFERENCES_MONINTENT;Default rendering intent
-!PREFERENCES_MONITOR;Monitor
-!PREFERENCES_MONPROFILE;Default color profile
-!PREFERENCES_MONPROFILE_WARNOSX;Due to MacOS limitations, only sRGB is supported.
-!PREFERENCES_MULTITABDUALMON;Multiple Editor Tabs In Own Window Mode
-!PREFERENCES_NAVIGATIONFRAME;Navigation
-!PREFERENCES_OVERLAY_FILENAMES_FILMSTRIP;Overlay filenames on thumbnails in the editor pannel
-!PREFERENCES_OVERWRITEOUTPUTFILE;Overwrite existing output files
-!PREFERENCES_PANFACTORLABEL;Pan rate amplification
-!PREFERENCES_PARSEDEXTDOWNHINT;Move selected extension down in the list.
-!PREFERENCES_PARSEDEXTUPHINT;Move selected extension up in the list.
-!PREFERENCES_PERFORMANCE_MEASURE;Measure
-!PREFERENCES_PERFORMANCE_MEASURE_HINT;Logs processing times in console
-!PREFERENCES_PERFORMANCE_THREADS;Threads
-!PREFERENCES_PERFORMANCE_THREADS_LABEL;Maximum number of threads for Noise Reduction and Wavelet Levels (0 = Automatic)
-!PREFERENCES_PREVDEMO;Preview Demosaic Method
-!PREFERENCES_PREVDEMO_FAST;Fast
-!PREFERENCES_PREVDEMO_LABEL;Demosaicing method used for the preview at <100% zoom:
-!PREFERENCES_PREVDEMO_SIDECAR;As in PP3
-!PREFERENCES_PRINTER;Printer (Soft-Proofing)
-!PREFERENCES_PROFILESAVEBOTH;Save processing profile both to the cache and next to the input file
-!PREFERENCES_PROFILESAVELOCATION;Processing profile saving location
-!PREFERENCES_PROFILE_NONE;None
-!PREFERENCES_PRTINTENT;Rendering intent
-!PREFERENCES_PRTPROFILE;Color profile
-!PREFERENCES_REMEMBERZOOMPAN;Remember zoom % and pan offset
-!PREFERENCES_REMEMBERZOOMPAN_TOOLTIP;Remember the zoom % and pan offset of the current image when opening a new image.\n\nThis option only works in "Single Editor Tab Mode" and when "Demosaicing method used for the preview at <100% zoom" is set to "As in PP3".
-!PREFERENCES_SAVE_TP_OPEN_NOW;Save tool collapsed/expanded state now
-!PREFERENCES_SERIALIZE_TIFF_READ;TIFF Read Settings
-!PREFERENCES_SERIALIZE_TIFF_READ_LABEL;Serialize reading of TIFF files
-!PREFERENCES_SERIALIZE_TIFF_READ_TOOLTIP;Enabling this option when working with folders containing uncompressed TIFF files can increase performance of thumbnail generation.
-!PREFERENCES_SHOWEXPOSURECOMPENSATION;Append exposure compensation
-!PREFERENCES_SHOWFILMSTRIPTOOLBAR;Show Filmstrip toolbar
-!PREFERENCES_SINGLETABVERTAB;Single Editor Tab Mode, Vertical Tabs
-!PREFERENCES_SND_BATCHQUEUEDONE;Queue processing done
-!PREFERENCES_SND_HELP;Enter a full file path to set a sound, or leave blank for no sound.\nFor system sounds on Windows use "SystemDefault", "SystemAsterisk" etc., and on Linux use "complete", "window-attention" etc.
-!PREFERENCES_SND_LNGEDITPROCDONE;Editor processing done
-!PREFERENCES_SND_THRESHOLDSECS;After seconds
-!PREFERENCES_TAB_DYNAMICPROFILE;Dynamic Profile Rules
-!PREFERENCES_TAB_PERFORMANCE;Performance
-!PREFERENCES_TAB_SOUND;Sounds
-!PREFERENCES_THUMBNAIL_INSPECTOR_JPEG;Embedded JPEG preview
-!PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TP_LABEL;Tool panel:
-!PREFERENCES_TP_VSCROLLBAR;Hide vertical scrollbar
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
-!PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-!PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
-!PROFILEPANEL_COPYPPASTE;Parameters to copy
-!PROFILEPANEL_GLOBALPROFILES;Bundled profiles
-!PROFILEPANEL_LOADPPASTE;Parameters to load
-!PROFILEPANEL_MODE_TIP;Processing profile fill mode.\n\nButton pressed: partial profiles will be converted to full profiles; the missing values will be replaced with hard-coded defaults.\n\nButton released: profiles will be applied as they are, altering only those values which they contain.
-!PROFILEPANEL_MYPROFILES;My profiles
-!PROFILEPANEL_PASTEPPASTE;Parameters to paste
-!PROFILEPANEL_PDYNAMIC;Dynamic
-!PROFILEPANEL_PINTERNAL;Neutral
-!PROFILEPANEL_SAVEPPASTE;Parameters to save
-!PROGRESSBAR_DECODING;Decoding...
-!PROGRESSBAR_GREENEQUIL;Green equilibration...
-!PROGRESSBAR_HLREC;Highlight reconstruction...
-!PROGRESSBAR_HOTDEADPIXELFILTER;Hot/dead pixel filter...
-!PROGRESSBAR_LINEDENOISE;Line noise filter...
-!PROGRESSBAR_LOADINGTHUMBS;Loading thumbnails...
-!PROGRESSBAR_NOIMAGES;No images found
-!PROGRESSBAR_PROCESSING_PROFILESAVED;Processing profile saved
-!PROGRESSBAR_RAWCACORR;Raw CA correction...
-!PROGRESSBAR_SNAPSHOT_ADDED;Snapshot added
-!QINFO_FRAMECOUNT;%2 frames
-!QINFO_HDR;HDR / %2 frame(s)
-!QINFO_PIXELSHIFT;Pixel Shift / %2 frame(s)
-!SAMPLEFORMAT_0;Unknown data format
-!SAMPLEFORMAT_1;8-bit unsigned
-!SAMPLEFORMAT_2;16-bit unsigned
-!SAMPLEFORMAT_4;24-bit LogLuv
-!SAMPLEFORMAT_8;32-bit LogLuv
-!SAMPLEFORMAT_16;16-bit floating-point
-!SAMPLEFORMAT_32;24-bit floating-point
-!SAMPLEFORMAT_64;32-bit floating-point
-!SAVEDLG_FILEFORMAT_FLOAT; floating-point
-!SAVEDLG_FORCEFORMATOPTS;Force saving options
-!SAVEDLG_SUBSAMP;Subsampling
-!SAVEDLG_SUBSAMP_1;Best compression
-!SAVEDLG_SUBSAMP_2;Balanced
-!SAVEDLG_SUBSAMP_3;Best quality
-!SAVEDLG_SUBSAMP_TOOLTIP;Best compression:\nJ:a:b 4:2:0\nh/v 2/2\nChroma halved horizontally and vertically.\n\nBalanced:\nJ:a:b 4:2:2\nh/v 2/1\nChroma halved horizontally.\n\nBest quality:\nJ:a:b 4:4:4\nh/v 1/1\nNo chroma subsampling.
-!SAVEDLG_WARNFILENAME;File will be named
-!SHCSELECTOR_TOOLTIP;Click right mouse button to reset the position of those 3 sliders.
-!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
-!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!THRESHOLDSELECTOR_B;Bottom
-!THRESHOLDSELECTOR_BL;Bottom-left
-!THRESHOLDSELECTOR_BR;Bottom-right
-!THRESHOLDSELECTOR_HINT;Hold the Shift key to move individual control points.
-!THRESHOLDSELECTOR_T;Top
-!THRESHOLDSELECTOR_TL;Top-left
-!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
-!TP_BWMIX_ALGO;Algorithm OYCPM
-!TP_BWMIX_ALGO_LI;Linear
-!TP_BWMIX_ALGO_SP;Special effects
-!TP_BWMIX_ALGO_TOOLTIP;Linear: will produce a normal linear response.\nSpecial effects: will produce special effects by mixing channels non-linearly.
-!TP_BWMIX_AUTOCH;Auto
-!TP_BWMIX_CC_ENABLED;Adjust complementary color
-!TP_BWMIX_CC_TOOLTIP;Enable to allow automatic adjustment of complementary colors in ROYGCBPM mode.
-!TP_BWMIX_CHANNEL;Luminance equalizer
-!TP_BWMIX_CURVEEDITOR1;'Before' curve
-!TP_BWMIX_CURVEEDITOR2;'After' curve
-!TP_BWMIX_CURVEEDITOR_AFTER_TOOLTIP;Tone curve, after B&W conversion, at the end of treatment.
-!TP_BWMIX_CURVEEDITOR_BEFORE_TOOLTIP;Tone curve, just before B&W conversion.\nMay take into account the color components.
-!TP_BWMIX_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H).\nPay attention to extreme values as they may cause artifacts.
-!TP_BWMIX_FILTER;Color Filter
-!TP_BWMIX_FILTER_BLUE;Blue
-!TP_BWMIX_FILTER_BLUEGREEN;Blue-Green
-!TP_BWMIX_FILTER_GREEN;Green
-!TP_BWMIX_FILTER_GREENYELLOW;Green-Yellow
-!TP_BWMIX_FILTER_NONE;None
-!TP_BWMIX_FILTER_PURPLE;Purple
-!TP_BWMIX_FILTER_RED;Red
-!TP_BWMIX_FILTER_REDYELLOW;Red-Yellow
-!TP_BWMIX_FILTER_TOOLTIP;The color filter simulates shots taken with a colored filter placed in front of the lens. Colored filters reduce the transmission of specific color ranges and therefore affect their lightness. E.g. a red filter darkens blue skies.
-!TP_BWMIX_FILTER_YELLOW;Yellow
-!TP_BWMIX_GAMMA;Gamma Correction
-!TP_BWMIX_GAM_TOOLTIP;Correct gamma for each RGB channel.
-!TP_BWMIX_LABEL;Black-and-White
-!TP_BWMIX_MET;Method
-!TP_BWMIX_MET_CHANMIX;Channel Mixer
-!TP_BWMIX_MET_DESAT;Desaturation
-!TP_BWMIX_MET_LUMEQUAL;Luminance Equalizer
-!TP_BWMIX_MIXC;Channel Mixer
-!TP_BWMIX_NEUTRAL;Reset
-!TP_BWMIX_RGBLABEL;R: %1%% G: %2%% B: %3%% Total: %4%%
-!TP_BWMIX_RGBLABEL_HINT;Final RGB factors that take care of all the mixer options.\n"Total" displays the sum of the RGB values:\n- always 100% in relative mode\n- higher (lighter) or lower (darker) than 100% in absolute mode.
-!TP_BWMIX_RGB_TOOLTIP;Mix the RGB channels. Use presets for guidance.\nPay attention to negative values that may cause artifacts or erratic behavior.
-!TP_BWMIX_SETTING;Presets
-!TP_BWMIX_SETTING_TOOLTIP;Different presets (film, landscape, etc.) or manual Channel Mixer settings.
-!TP_BWMIX_SET_HIGHCONTAST;High contrast
-!TP_BWMIX_SET_HIGHSENSIT;High Sensitivity
-!TP_BWMIX_SET_HYPERPANCHRO;Hyper Panchromatic
-!TP_BWMIX_SET_INFRARED;Infrared
-!TP_BWMIX_SET_LANDSCAPE;Landscape
-!TP_BWMIX_SET_LOWSENSIT;Low Sensitivity
-!TP_BWMIX_SET_LUMINANCE;Luminance
-!TP_BWMIX_SET_NORMCONTAST;Normal Contrast
-!TP_BWMIX_SET_ORTHOCHRO;Orthochromatic
-!TP_BWMIX_SET_PANCHRO;Panchromatic
-!TP_BWMIX_SET_PORTRAIT;Portrait
-!TP_BWMIX_SET_RGBABS;Absolute RGB
-!TP_BWMIX_SET_RGBREL;Relative RGB
-!TP_BWMIX_SET_ROYGCBPMABS;Absolute ROYGCBPM
-!TP_BWMIX_SET_ROYGCBPMREL;Relative ROYGCBPM
-!TP_BWMIX_TCMODE_FILMLIKE;B&W Film-like
-!TP_BWMIX_TCMODE_SATANDVALBLENDING;B&W Saturation and Value Blending
-!TP_BWMIX_TCMODE_STANDARD;B&W Standard
-!TP_BWMIX_TCMODE_WEIGHTEDSTD;B&W Weighted Standard
-!TP_BWMIX_VAL;L
-!TP_CBDL_AFT;After Black-and-White
-!TP_CBDL_BEF;Before Black-and-White
-!TP_CBDL_METHOD;Process located
-!TP_CBDL_METHOD_TOOLTIP;Choose whether the Contrast by Detail Levels tool is to be positioned after the Black-and-White tool, which makes it work in L*a*b* space, or before it, which makes it work in RGB space.
-!TP_CHROMATABERR_LABEL;Chromatic Aberration
-!TP_COLORAPP_ABSOLUTELUMINANCE;Absolute luminance
-!TP_COLORAPP_ALGO;Algorithm
-!TP_COLORAPP_ALGO_ALL;All
-!TP_COLORAPP_ALGO_JC;Lightness + Chroma (JC)
-!TP_COLORAPP_ALGO_JS;Lightness + Saturation (JS)
-!TP_COLORAPP_ALGO_QM;Brightness + Colorfulness (QM)
-!TP_COLORAPP_ALGO_TOOLTIP;Lets you choose between parameter subsets or all parameters.
-!TP_COLORAPP_BADPIXSL;Hot/bad pixel filter
-!TP_COLORAPP_BADPIXSL_TOOLTIP;Suppression of hot/bad (brightly colored) pixels.\n0 = No effect\n1 = Median\n2 = Gaussian.\nAlternatively, adjust the image to avoid very dark shadows.\n\nThese artifacts are due to limitations of CIECAM02.
-!TP_COLORAPP_BRIGHT;Brightness (Q)
-!TP_COLORAPP_BRIGHT_TOOLTIP;Brightness in CIECAM02 takes into account the white's luminosity and differs from L*a*b* and RGB brightness.
-!TP_COLORAPP_CAT02ADAPTATION_TOOLTIP;When setting manually, values above 65 are recommended.
-!TP_COLORAPP_CHROMA;Chroma (C)
-!TP_COLORAPP_CHROMA_M;Colorfulness (M)
-!TP_COLORAPP_CHROMA_M_TOOLTIP;Colorfulness in CIECAM02 differs from L*a*b* and RGB colorfulness.
-!TP_COLORAPP_CHROMA_S;Saturation (S)
-!TP_COLORAPP_CHROMA_S_TOOLTIP;Saturation in CIECAM02 differs from L*a*b* and RGB saturation.
-!TP_COLORAPP_CHROMA_TOOLTIP;Chroma in CIECAM02 differs from L*a*b* and RGB chroma.
-!TP_COLORAPP_CIECAT_DEGREE;CAT02 adaptation
-!TP_COLORAPP_CONTRAST;Contrast (J)
-!TP_COLORAPP_CONTRAST_Q;Contrast (Q)
-!TP_COLORAPP_CONTRAST_Q_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CONTRAST_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CURVEEDITOR1;Tone curve 1
-!TP_COLORAPP_CURVEEDITOR1_TOOLTIP;Shows the histogram of L* (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of J or Q after CIECAM02.\n\nJ and Q are not shown in the main histogram panel.\n\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_CURVEEDITOR2;Tone curve 2
-!TP_COLORAPP_CURVEEDITOR2_TOOLTIP;Same usage as with the second exposure tone curve.
-!TP_COLORAPP_CURVEEDITOR3;Color curve
-!TP_COLORAPP_CURVEEDITOR3_TOOLTIP;Adjust either chroma, saturation or colorfulness.\n\nShows the histogram of chromaticity (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of C, s or M after CIECAM02.\n\nC, s and M are not shown in the main histogram panel.\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_DATACIE;CIECAM02 output histograms in curves
-!TP_COLORAPP_DATACIE_TOOLTIP;When enabled, histograms in CIECAM02 curves show approximate values/ranges for J or Q, and C, s or M after the CIECAM02 adjustments.\nThis selection does not impact the main histogram panel.\n\nWhen disabled, histograms in CIECAM02 curves show L*a*b* values before CIECAM02 adjustments.
-!TP_COLORAPP_FREE;Free temp+green + CAT02 + [output]
-!TP_COLORAPP_GAMUT;Gamut control (L*a*b*)
-!TP_COLORAPP_GAMUT_TOOLTIP;Allow gamut control in L*a*b* mode.
-!TP_COLORAPP_HUE;Hue (h)
-!TP_COLORAPP_HUE_TOOLTIP;Hue (h) - angle between 0° and 360°.
-!TP_COLORAPP_LABEL;CIE Color Appearance Model 2002
-!TP_COLORAPP_LABEL_CAM02;Image Adjustments
-!TP_COLORAPP_LABEL_SCENE;Scene Conditions
-!TP_COLORAPP_LABEL_VIEWING;Viewing Conditions
-!TP_COLORAPP_LIGHT;Lightness (J)
-!TP_COLORAPP_LIGHT_TOOLTIP;Lightness in CIECAM02 differs from L*a*b* and RGB lightness.
-!TP_COLORAPP_MEANLUMINANCE;Mean luminance (Yb%)
-!TP_COLORAPP_MODEL;WP Model
-!TP_COLORAPP_MODEL_TOOLTIP;White-Point Model.\n\nWB [RT] + [output]: RT's white balance is used for the scene, CIECAM02 is set to D50, and the output device's white balance is set in Viewing Conditions.\n\nWB [RT+CAT02] + [output]: RT's white balance settings are used by CAT02 and the output device's white balance is set in Viewing Conditions.\n\nFree temp+green + CAT02 + [output]: temp and green are selected by the user, the output device's white balance is set in Viewing Conditions.
-!TP_COLORAPP_NEUTRAL;Reset
-!TP_COLORAPP_NEUTRAL_TIP;Reset all sliders checkbox and curves to their default values
-!TP_COLORAPP_RSTPRO;Red & skin-tones protection
-!TP_COLORAPP_RSTPRO_TOOLTIP;Red & skin-tones protection affects both sliders and curves.
-!TP_COLORAPP_SURROUND;Surround
-!TP_COLORAPP_SURROUND_AVER;Average
-!TP_COLORAPP_SURROUND_DARK;Dark
-!TP_COLORAPP_SURROUND_DIM;Dim
-!TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
-!TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\nAverage: Average light environment (standard). The image will not change.\n\nDim: Dim environment (TV). The image will become slighty dark.\n\nDark: Dark environment (projector). The image will become more dark.\n\nExtremly Dark: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
-!TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
-!TP_COLORAPP_TCMODE_CHROMA;Chroma
-!TP_COLORAPP_TCMODE_COLORF;Colorfulness
-!TP_COLORAPP_TCMODE_LABEL1;Curve mode 1
-!TP_COLORAPP_TCMODE_LABEL2;Curve mode 2
-!TP_COLORAPP_TCMODE_LABEL3;Curve chroma mode
-!TP_COLORAPP_TCMODE_LIGHTNESS;Lightness
-!TP_COLORAPP_TCMODE_SATUR;Saturation
-!TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD50 temp=5003\nD55 temp=5503\nD65 temp=6504\nD75 temp=7504
-!TP_COLORAPP_TONECIE;Tone mapping using CIECAM02
-!TP_COLORAPP_TONECIE_TOOLTIP;If this option is disabled, tone mapping is done in L*a*b* space.\nIf this option is enabled, tone mapping is done using CIECAM02.\nThe Tone Mapping tool must be enabled for this setting to take effect.
-!TP_COLORAPP_VIEWING_ABSOLUTELUMINANCE_TOOLTIP;Absolute luminance of the viewing environment\n(usually 16 cd/m²).
-!TP_COLORAPP_WBCAM;WB [RT+CAT02] + [output]
-!TP_COLORAPP_WBRT;WB [RT] + [output]
-!TP_COLORTONING_AB;o C/L
-!TP_COLORTONING_AUTOSAT;Automatic
-!TP_COLORTONING_BALANCE;Balance
-!TP_COLORTONING_BY;o C/L
-!TP_COLORTONING_CHROMAC;Opacity
-!TP_COLORTONING_COLOR;Color
-!TP_COLORTONING_CURVEEDITOR_CL_TOOLTIP;Chroma opacity as a function of luminance oC=f(L)
-!TP_COLORTONING_HIGHLIGHT;Highlights
-!TP_COLORTONING_HUE;Hue
-!TP_COLORTONING_LAB;L*a*b* blending
-!TP_COLORTONING_LABEL;Color Toning
-!TP_COLORTONING_LABGRID;L*a*b* color correction grid
-!TP_COLORTONING_LABGRID_VALUES;HL: a=%1 b=%2\nS: a=%3 b=%4
-!TP_COLORTONING_LABREGIONS;Color correction regions
-!TP_COLORTONING_LABREGION_ABVALUES;a=%1 b=%2
-!TP_COLORTONING_LABREGION_CHANNEL;Channel
-!TP_COLORTONING_LABREGION_CHANNEL_ALL;All
-!TP_COLORTONING_LABREGION_CHANNEL_B;Blue
-!TP_COLORTONING_LABREGION_CHANNEL_G;Green
-!TP_COLORTONING_LABREGION_CHANNEL_R;Red
-!TP_COLORTONING_LABREGION_CHROMATICITYMASK;C
-!TP_COLORTONING_LABREGION_HUEMASK;H
-!TP_COLORTONING_LABREGION_LIGHTNESS;Lightness
-!TP_COLORTONING_LABREGION_LIGHTNESSMASK;L
-!TP_COLORTONING_LABREGION_LIST_TITLE;Correction
-!TP_COLORTONING_LABREGION_MASK;Mask
-!TP_COLORTONING_LABREGION_MASKBLUR;Mask Blur
-!TP_COLORTONING_LABREGION_OFFSET;Offset
-!TP_COLORTONING_LABREGION_POWER;Power
-!TP_COLORTONING_LABREGION_SATURATION;Saturation
-!TP_COLORTONING_LABREGION_SHOWMASK;Show mask
-!TP_COLORTONING_LABREGION_SLOPE;Slope
-!TP_COLORTONING_LUMA;Luminance
-!TP_COLORTONING_LUMAMODE;Preserve luminance
-!TP_COLORTONING_LUMAMODE_TOOLTIP;If enabled, when you change color (red, green, cyan, blue, etc.) the luminance of each pixel is preserved.
-!TP_COLORTONING_METHOD;Method
-!TP_COLORTONING_METHOD_TOOLTIP;"L*a*b* blending", "RGB sliders" and "RGB curves" use interpolated color blending.\n"Color balance (Shadows/Midtones/Highlights)" and "Saturation 2 colors" use direct colors.\n\nThe Black-and-White tool can be enabled when using any color toning method, which allows for color toning.
-!TP_COLORTONING_MIDTONES;Midtones
-!TP_COLORTONING_NEUTRAL;Reset sliders
-!TP_COLORTONING_NEUTRAL_TIP;Reset all values (Shadows, Midtones, Highlights) to default.
-!TP_COLORTONING_OPACITY;Opacity
-!TP_COLORTONING_RGBCURVES;RGB - Curves
-!TP_COLORTONING_RGBSLIDERS;RGB - Sliders
-!TP_COLORTONING_SA;Saturation Protection
-!TP_COLORTONING_SATURATEDOPACITY;Strength
-!TP_COLORTONING_SATURATIONTHRESHOLD;Threshold
-!TP_COLORTONING_SHADOWS;Shadows
-!TP_COLORTONING_SPLITCO;Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITCOCO;Color Balance Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITLR;Saturation 2 colors
-!TP_COLORTONING_STR;Strength
-!TP_COLORTONING_STRENGTH;Strength
-!TP_COLORTONING_TWO2;Special chroma '2 colors'
-!TP_COLORTONING_TWOALL;Special chroma
-!TP_COLORTONING_TWOBY;Special a* and b*
-!TP_COLORTONING_TWOCOLOR_TOOLTIP;Standard chroma:\nLinear response, a* = b*.\n\nSpecial chroma:\nLinear response, a* = b*, but unbound - try under the diagonal.\n\nSpecial a* and b*:\nLinear response unbound with separate curves for a* and b*. Intended for special effects.\n\nSpecial chroma 2 colors:\nMore predictable.
-!TP_COLORTONING_TWOSTD;Standard chroma
-!TP_CROP_GTEPASSPORT;Biometric Passport
-!TP_CROP_GTFRAME;Frame
-!TP_CROP_GTGRID;Grid
-!TP_CROP_GTHARMMEANS;Harmonic Means
-!TP_CROP_GTTRIANGLE1;Golden Triangles 1
-!TP_CROP_GTTRIANGLE2;Golden Triangles 2
-!TP_CROP_PPI;PPI
-!TP_CROP_RESETCROP;Reset
-!TP_CROP_SELECTCROP;Select
-!TP_DARKFRAME_AUTOSELECT;Auto-selection
-!TP_DARKFRAME_LABEL;Dark-Frame
-!TP_DEFRINGE_LABEL;Defringe
-!TP_DEFRINGE_RADIUS;Radius
-!TP_DEFRINGE_THRESHOLD;Threshold
-!TP_DEHAZE_DEPTH;Depth
-!TP_DEHAZE_LABEL;Haze Removal
-!TP_DEHAZE_SHOW_DEPTH_MAP;Show depth map
-!TP_DEHAZE_STRENGTH;Strength
-!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
-!TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
-!TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominance
-!TP_DIRPYRDENOISE_CHROMINANCE_MANUAL;Manual
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD;Method
-!TP_DIRPYRDENOISE_CHROMINANCE_METHODADVANCED_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nAutomatic multi-zones\nNo preview - works only during saving, but using the "Preview" method by matching the tile size and center to the preview size and center you can get an idea of the expected results.\nThe image is divided into tiles (about 10 to 70 depending on image size) and each tile receives its own chrominance noise reduction settings.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_PMZ;Preview multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW;Preview
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEWRESIDUAL_INFO_TOOLTIP;Displays the remaining noise levels of the part of the image visible in the preview after wavelet.\n\n>300 Very noisy\n100-300 Noisy\n50-100 A little noisy\n<50 Very low noise\n\nBeware, the values will differ between RGB and L*a*b* mode. The RGB values are less accurate because the RGB mode does not completely separate luminance and chrominance.
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_INFO;Preview size=%1, Center: Px=%2 Py=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Preview noise: Mean=%1 High=%2
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= - High= -
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2 Ty=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
-!TP_DIRPYRDENOISE_LABEL;Noise Reduction
-!TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
-!TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
-!TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Detail recovery
-!TP_DIRPYRDENOISE_LUMINANCE_FRAME;Luminance
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE;Color space
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;For raw images either RGB or L*a*b* methods can be used.\n\nFor non-raw images the L*a*b* method will be used, regardless of the selection.
-!TP_DIRPYRDENOISE_MAIN_GAMMA_TOOLTIP;Gamma varies noise reduction strength across the range of tones. Smaller values will target shadows, while larger values will stretch the effect to the brighter tones.
-!TP_DIRPYRDENOISE_MAIN_MODE;Mode
-!TP_DIRPYRDENOISE_MAIN_MODE_AGGRESSIVE;Aggressive
-!TP_DIRPYRDENOISE_MAIN_MODE_CONSERVATIVE;Conservative
-!TP_DIRPYRDENOISE_MAIN_MODE_TOOLTIP;"Conservative" preserves low frequency chroma patterns, while "aggressive" obliterates them.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD;Median method
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_CHROMINANCE;Chroma only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LABEL;Median Filter
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LUMINANCE;Luminance only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_RGB;RGB
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_TOOLTIP;When using the "Luminance only" and "L*a*b*" methods, median filtering will be performed just after the wavelet step in the noise reduction pipeline.\nWhen using the "RGB" mode, it will be performed at the very end of the noise reduction pipeline.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_WEIGHTED;Weighted L* (little) + a*b* (normal)
-!TP_DIRPYRDENOISE_MEDIAN_PASSES;Median iterations
-!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
-!TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
-!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
-!TP_DIRPYRDENOISE_TYPE_3X3;3×3
-!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
-!TP_DIRPYRDENOISE_TYPE_5X5;5×5
-!TP_DIRPYRDENOISE_TYPE_5X5SOFT;5×5 soft
-!TP_DIRPYRDENOISE_TYPE_7X7;7×7
-!TP_DIRPYRDENOISE_TYPE_9X9;9×9
-!TP_DIRPYREQUALIZER_ALGO;Skin Color Range
-!TP_DIRPYREQUALIZER_ALGO_TOOLTIP;Fine: closer to the colors of the skin, minimizing the action on other colors\nLarge: avoid more artifacts.
-!TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts
-!TP_DIRPYREQUALIZER_HUESKIN;Skin hue
-!TP_DIRPYREQUALIZER_HUESKIN_TOOLTIP;This pyramid is for the upper part, so far as the algorithm at its maximum efficiency.\nTo the lower part, the transition zones.\nIf you need to move the area significantly to the left or right - or if there are artifacts: the white balance is incorrect\nYou can slightly reduce the zone to prevent the rest of the image is affected.
-!TP_DIRPYREQUALIZER_SKIN;Skin targetting/protection
-!TP_DIRPYREQUALIZER_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image.
-!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
-!TP_EPD_EDGESTOPPING;Edge stopping
-!TP_EPD_GAMMA;Gamma
-!TP_EPD_LABEL;Tone Mapping
-!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
-!TP_EPD_SCALE;Scale
-!TP_EPD_STRENGTH;Strength
-!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
-!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
-!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
-!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
-!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
-!TP_EXPOSURE_CURVEEDITOR2;Tone curve 2
-!TP_EXPOSURE_CURVEEDITOR2_TOOLTIP;Please refer to the "Exposure > Tone Curves" RawPedia article to learn how to achieve the best results by using two tone curves.
-!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
-!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
-!TP_EXPOSURE_SATURATION;Saturation
-!TP_EXPOSURE_TCMODE_FILMLIKE;Film-like
-!TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1
-!TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2
-!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
-!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual
-!TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending
-!TP_EXPOSURE_TCMODE_STANDARD;Standard
-!TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard
-!TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points
-!TP_EXPOS_WHITEPOINT_LABEL;Raw White Points
-!TP_FILMSIMULATION_LABEL;Film Simulation
-!TP_FILMSIMULATION_SLOWPARSEDIR;RawTherapee is configured to look for Hald CLUT images, which are used for the Film Simulation tool, in a folder which is taking too long to load.\nGo to Preferences > Image Processing > Film Simulation\nto see which folder is being used. You should either point RawTherapee to a folder which contains only Hald CLUT images and nothing more, or to an empty folder if you don't want to use the Film Simulation tool.\n\nRead the Film Simulation article in RawPedia for more information.\n\nDo you want to cancel the scan now?
-!TP_FILMSIMULATION_STRENGTH;Strength
-!TP_FILMSIMULATION_ZEROCLUTSFOUND;Set HaldCLUT directory in Preferences
-!TP_FLATFIELD_AUTOSELECT;Auto-selection
-!TP_FLATFIELD_BLURRADIUS;Blur radius
-!TP_FLATFIELD_BLURTYPE;Blur type
-!TP_FLATFIELD_BT_AREA;Area
-!TP_FLATFIELD_BT_HORIZONTAL;Horizontal
-!TP_FLATFIELD_BT_VERTHORIZ;Vertical + Horizontal
-!TP_FLATFIELD_BT_VERTICAL;Vertical
-!TP_FLATFIELD_CLIPCONTROL;Clip control
-!TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Clip control avoids clipped highlights caused by applying the flat field. If there are already clipped highlights before applying the flat field, clip control can lead to color cast.
-!TP_FLATFIELD_LABEL;Flat-Field
-!TP_GENERAL_11SCALE_TOOLTIP;The effects of this tool are only visible or only accurate at a preview scale of 1:1.
-!TP_GRADIENT_CENTER;Center
-!TP_GRADIENT_CENTER_X;Center X
-!TP_GRADIENT_CENTER_X_TOOLTIP;Shift gradient to the left (negative values) or right (positive values).
-!TP_GRADIENT_CENTER_Y;Center Y
-!TP_GRADIENT_CENTER_Y_TOOLTIP;Shift gradient up (negative values) or down (positive values).
-!TP_GRADIENT_DEGREE;Angle
-!TP_GRADIENT_DEGREE_TOOLTIP;Rotation angle in degrees.
-!TP_GRADIENT_FEATHER;Feather
-!TP_GRADIENT_FEATHER_TOOLTIP;Gradient width in percent of the image diagonal.
-!TP_GRADIENT_LABEL;Graduated Filter
-!TP_GRADIENT_STRENGTH;Strength
-!TP_GRADIENT_STRENGTH_TOOLTIP;Filter strength in stops.
-!TP_HLREC_BLEND;Blend
-!TP_HLREC_ENA_TOOLTIP;Could be activated by Auto Levels.
-!TP_HSVEQUALIZER_CHANNEL;Channel
-!TP_HSVEQUALIZER_HUE;H
-!TP_HSVEQUALIZER_LABEL;HSV Equalizer
-!TP_HSVEQUALIZER_SAT;S
-!TP_HSVEQUALIZER_VAL;V
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Baseline exposure
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET_TOOLTIP;Employ the embedded DCP baseline exposure offset. The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYHUESATMAP;Base table
-!TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYLOOKTABLE;Look table
-!TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-!TP_ICM_BLENDCMSMATRIX;Blend ICC highlights with matrix
-!TP_ICM_BLENDCMSMATRIX_TOOLTIP;Enable to recover clipped highlights when using LUT-based ICC profiles.
-!TP_ICM_BPC;Black Point Compensation
-!TP_ICM_DCPILLUMINANT;Illuminant
-!TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
-!TP_ICM_DCPILLUMINANT_TOOLTIP;Select which embedded DCP illuminant to employ. Default is "interpolated" which is a mix between the two based on white balance. The setting is only available if a dual-illuminant DCP with interpolation support is selected.
-!TP_ICM_INPUTCAMERAICC;Auto-matched camera profile
-!TP_ICM_INPUTCAMERAICC_TOOLTIP;Use RawTherapee's camera-specific DCP or ICC input color profiles. These profiles are more precise than simpler matrix ones. They are not available for all cameras. These profiles are stored in the /iccprofiles/input and /dcpprofiles folders and are automatically retrieved based on a file name matching to the exact model name of the camera.
-!TP_ICM_INPUTCAMERA_TOOLTIP;Use a simple color matrix from dcraw, an enhanced RawTherapee version (whichever is available based on camera model) or one embedded in the DNG.
-!TP_ICM_INPUTCUSTOM_TOOLTIP;Select your own DCP/ICC color profile file for the camera.
-!TP_ICM_INPUTEMBEDDED_TOOLTIP;Use color profile embedded in non-raw files.
-!TP_ICM_INPUTNONE;No profile
-!TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases.
-!TP_ICM_PROFILEINTENT;Rendering Intent
-!TP_ICM_SAVEREFERENCE;Save Reference Image
-!TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance
-!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles.
-!TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile.
-!TP_ICM_TONECURVE;Tone curve
-!TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only available if the selected DCP has a tone curve.
-!TP_ICM_WORKING_TRC;Tone response curve:
-!TP_ICM_WORKING_TRC_CUSTOM;Custom
-!TP_ICM_WORKING_TRC_GAMMA;Gamma
-!TP_ICM_WORKING_TRC_NONE;None
-!TP_ICM_WORKING_TRC_SLOPE;Slope
-!TP_ICM_WORKING_TRC_TOOLTIP;Only for built-in profiles.
-!TP_LABCURVE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_LABCURVE_AVOIDCOLORSHIFT_TOOLTIP;Fit colors into gamut of the working color space and apply Munsell correction.
-!TP_LABCURVE_CHROMATICITY;Chromaticity
-!TP_LABCURVE_CHROMA_TOOLTIP;To apply B&W toning, set Chromaticity to -100.
-!TP_LABCURVE_CURVEEDITOR_A_RANGE1;Green Saturated
-!TP_LABCURVE_CURVEEDITOR_A_RANGE2;Green Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE3;Red Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE4;Red Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE1;Blue Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE2;Blue Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE3;Yellow Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE4;Yellow Saturated
-!TP_LABCURVE_CURVEEDITOR_CC;CC
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE1;Neutral
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE2;Dull
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE3;Pastel
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE4;Saturated
-!TP_LABCURVE_CURVEEDITOR_CC_TOOLTIP;Chromaticity according to chromaticity C=f(C)
-!TP_LABCURVE_CURVEEDITOR_CH;CH
-!TP_LABCURVE_CURVEEDITOR_CH_TOOLTIP;Chromaticity according to hue C=f(H)
-!TP_LABCURVE_CURVEEDITOR_CL;CL
-!TP_LABCURVE_CURVEEDITOR_CL_TOOLTIP;Chromaticity according to luminance C=f(L)
-!TP_LABCURVE_CURVEEDITOR_HH;HH
-!TP_LABCURVE_CURVEEDITOR_HH_TOOLTIP;Hue according to hue H=f(H)
-!TP_LABCURVE_CURVEEDITOR_LC;LC
-!TP_LABCURVE_CURVEEDITOR_LC_TOOLTIP;Luminance according to chromaticity L=f(C)
-!TP_LABCURVE_CURVEEDITOR_LH;LH
-!TP_LABCURVE_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H)
-!TP_LABCURVE_CURVEEDITOR_LL_TOOLTIP;Luminance according to luminance L=f(L)
-!TP_LABCURVE_LCREDSK;Restrict LC to red and skin-tones
-!TP_LABCURVE_LCREDSK_TIP;If enabled, the LC Curve affects only red and skin-tones.\nIf disabled, it applies to all tones.
-!TP_LABCURVE_RSTPROTECTION;Red and skin-tones protection
-!TP_LABCURVE_RSTPRO_TOOLTIP;Works on the Chromaticity slider and the CC curve.
-!TP_LENSPROFILE_CORRECTION_AUTOMATCH;Automatically selected
-!TP_LENSPROFILE_CORRECTION_LCPFILE;LCP file
-!TP_LENSPROFILE_CORRECTION_MANUAL;Manually selected
-!TP_LENSPROFILE_LABEL;Profiled Lens Correction
-!TP_LENSPROFILE_LENS_WARNING;Warning: the crop factor used for lens profiling is larger than the crop factor of the camera, the results might be wrong.
-!TP_LENSPROFILE_MODE_HEADER;Lens Profile
-!TP_LENSPROFILE_USE_CA;Chromatic aberration
-!TP_LENSPROFILE_USE_GEOMETRIC;Geometric distortion
-!TP_LENSPROFILE_USE_HEADER;Correct
-!TP_LENSPROFILE_USE_VIGNETTING;Vignetting
-!TP_LOCALCONTRAST_AMOUNT;Amount
-!TP_LOCALCONTRAST_DARKNESS;Darkness level
-!TP_LOCALCONTRAST_LABEL;Local Contrast
-!TP_LOCALCONTRAST_LIGHTNESS;Lightness level
-!TP_LOCALCONTRAST_RADIUS;Radius
-!TP_METADATA_EDIT;Apply modifications
-!TP_METADATA_MODE;Metadata copy mode
-!TP_METADATA_STRIP;Strip all metadata
-!TP_METADATA_TUNNEL;Copy unchanged
-!TP_NEUTRAL;Reset
-!TP_NEUTRAL_TIP;Resets exposure sliders to neutral values.\nApplies to the same controls that Auto Levels applies to, regardless of whether you used Auto Levels or not.
-!TP_PCVIGNETTE_FEATHER;Feather
-!TP_PCVIGNETTE_FEATHER_TOOLTIP;Feathering:\n0 = corners only,\n50 = halfway to center,\n100 = to center.
-!TP_PCVIGNETTE_LABEL;Vignette Filter
-!TP_PCVIGNETTE_ROUNDNESS;Roundness
-!TP_PCVIGNETTE_ROUNDNESS_TOOLTIP;Roundness:\n0 = rectangle,\n50 = fitted ellipse,\n100 = circle.
-!TP_PCVIGNETTE_STRENGTH;Strength
-!TP_PCVIGNETTE_STRENGTH_TOOLTIP;Filter strength in stops (reached in corners).
-!TP_PFCURVE_CURVEEDITOR_CH;Hue
-!TP_PFCURVE_CURVEEDITOR_CH_TOOLTIP;Controls defringe strength by color.\nHigher = more,\nLower = less.
-!TP_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!TP_PREPROCESS_DEADPIXFILT_TOOLTIP;Tries to suppress dead pixels.
-!TP_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!TP_PREPROCESS_HOTPIXFILT_TOOLTIP;Tries to suppress hot pixels.
-!TP_PREPROCESS_LABEL;Preprocessing
-!TP_PREPROCESS_LINEDENOISE_DIRECTION;Direction
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_BOTH;Both
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_HORIZONTAL;Horizontal
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_PDAF_LINES;Horizontal only on PDAF rows
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_VERTICAL;Vertical
-!TP_PREPROCESS_NO_FOUND;None found
-!TP_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!TP_PRSHARPENING_LABEL;Post-Resize Sharpening
-!TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions.
-!TP_RAWCACORR_AUTOIT;Iterations
-!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
-!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CABLUE;Blue
-!TP_RAWCACORR_CARED;Red
-!TP_RAWCACORR_CASTR;Strength
-!TP_RAWEXPOS_BLACKS;Black Levels
-!TP_RAWEXPOS_BLACK_0;Green 1 (lead)
-!TP_RAWEXPOS_BLACK_1;Red
-!TP_RAWEXPOS_BLACK_2;Blue
-!TP_RAWEXPOS_BLACK_3;Green 2
-!TP_RAWEXPOS_BLACK_BLUE;Blue
-!TP_RAWEXPOS_BLACK_GREEN;Green
-!TP_RAWEXPOS_BLACK_RED;Red
-!TP_RAWEXPOS_LINEAR;White-point correction
-!TP_RAWEXPOS_RGB;Red, Green, Blue
-!TP_RAWEXPOS_TWOGREEN;Link greens
-!TP_RAW_1PASSMEDIUM;1-pass (Markesteijn)
-!TP_RAW_2PASS;1-pass+fast
-!TP_RAW_3PASSBEST;3-pass (Markesteijn)
-!TP_RAW_4PASS;3-pass+fast
-!TP_RAW_AHD;AHD
-!TP_RAW_AMAZE;AMaZE
-!TP_RAW_AMAZEVNG4;AMaZE+VNG4
-!TP_RAW_BORDER;Border
-!TP_RAW_DCB;DCB
-!TP_RAW_DCBVNG4;DCB+VNG4
-!TP_RAW_DMETHOD_PROGRESSBAR;%1 demosaicing...
-!TP_RAW_DMETHOD_PROGRESSBAR_REFINE;Demosaicing refinement...
-!TP_RAW_DMETHOD_TOOLTIP;Note: IGV and LMMSE are dedicated to high ISO images to aid in noise reduction without leading to maze patterns, posterization or a washed-out look.\nPixel Shift is for Pentax/Sony Pixel Shift files. It falls back to AMaZE for non-Pixel Shift files.
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST;Auto threshold
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST_TOOLTIP;If the checkbox is checked (recommended), RawTherapee calculates an optimum value based on flat regions in the image.\nIf there is no flat region in the image or the image is too noisy, the value will be set to 0.\nTo set the value manually, uncheck the checkbox first (reasonable values depend on the image).
-!TP_RAW_DUALDEMOSAICCONTRAST;Contrast threshold
-!TP_RAW_EAHD;EAHD
-!TP_RAW_FAST;Fast
-!TP_RAW_HD;Threshold
-!TP_RAW_HD_TOOLTIP;Lower values make hot/dead pixel detection more aggressive, but false positives may lead to artifacts. If you notice any artifacts appearing when enabling the Hot/Dead Pixel Filters, gradually increase the threshold value until they disappear.
-!TP_RAW_HPHD;HPHD
-!TP_RAW_IGV;IGV
-!TP_RAW_IMAGENUM;Sub-image
-!TP_RAW_IMAGENUM_SN;SN mode
-!TP_RAW_IMAGENUM_TOOLTIP;Some raw files consist of several sub-images (Pentax/Sony Pixel Shift, Pentax 3-in-1 HDR, Canon Dual Pixel, Fuji EXR).\n\nWhen using any demosaicing method other than Pixel Shift, this selects which sub-image is used.\n\nWhen using the Pixel Shift demosaicing method on a Pixel Shift raw, all sub-images are used, and this selects which sub-image should be used for moving parts.
-!TP_RAW_LABEL;Demosaicing
-!TP_RAW_LMMSE;LMMSE
-!TP_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!TP_RAW_LMMSE_TOOLTIP;Adds gamma (step 1), median (steps 2-4) and refinement (steps 5-6) to reduce artifacts and improve the signal-to-noise ratio.
-!TP_RAW_MONO;Mono
-!TP_RAW_NONE;None (Shows sensor pattern)
-!TP_RAW_PIXELSHIFT;Pixel Shift
-!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
-!TP_RAW_PIXELSHIFTDMETHOD;Demosaic method for motion
-!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
-!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
-!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
-!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
-!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
-!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
-!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
-!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
-!TP_RAW_PIXELSHIFTMM_OFF;Off
-!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
-!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
-!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
-!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
-!TP_RAW_PIXELSHIFTSIGMA;Blur radius
-!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
-!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
-!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
-!TP_RAW_RCD;RCD
-!TP_RAW_RCDVNG4;RCD+VNG4
-!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
-!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.\n+fast gives less artifacts in flat areas
-!TP_RAW_SENSOR_XTRANS_LABEL;Sensor with X-Trans Matrix
-!TP_RAW_VNG4;VNG4
-!TP_RAW_XTRANS;X-Trans
-!TP_RAW_XTRANSFAST;Fast X-Trans
-!TP_RESIZE_ALLOW_UPSCALING;Allow Upscaling
-!TP_RESIZE_APPLIESTO;Applies to:
-!TP_RESIZE_CROPPEDAREA;Cropped Area
-!TP_RESIZE_FITBOX;Bounding Box
-!TP_RESIZE_FULLIMAGE;Full Image
-!TP_RESIZE_LANCZOS;Lanczos
-!TP_RETINEX_CONTEDIT_HSL;HSL histogram
-!TP_RETINEX_CONTEDIT_LAB;L*a*b* histogram
-!TP_RETINEX_CONTEDIT_LH;Hue
-!TP_RETINEX_CONTEDIT_MAP;Equalizer
-!TP_RETINEX_CURVEEDITOR_CD;L=f(L)
-!TP_RETINEX_CURVEEDITOR_CD_TOOLTIP;Luminance according to luminance L=f(L)\nCorrect raw data to reduce halos and artifacts.
-!TP_RETINEX_CURVEEDITOR_LH;Strength=f(H)
-!TP_RETINEX_CURVEEDITOR_LH_TOOLTIP;Strength according to hue Strength=f(H)\nThis curve also acts on chroma when using the "Highlight" retinex method.
-!TP_RETINEX_CURVEEDITOR_MAP;L=f(L)
-!TP_RETINEX_CURVEEDITOR_MAP_TOOLTIP;This curve can be applied alone or with a Gaussian mask or wavelet mask.\nBeware of artifacts!
-!TP_RETINEX_EQUAL;Equalizer
-!TP_RETINEX_FREEGAMMA;Free gamma
-!TP_RETINEX_GAIN;Gain
-!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
-!TP_RETINEX_GAINTRANSMISSION;Gain transmission
-!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
-!TP_RETINEX_GAMMA;Gamma
-!TP_RETINEX_GAMMA_FREE;Free
-!TP_RETINEX_GAMMA_HIGH;High
-!TP_RETINEX_GAMMA_LOW;Low
-!TP_RETINEX_GAMMA_MID;Middle
-!TP_RETINEX_GAMMA_NONE;None
-!TP_RETINEX_GAMMA_TOOLTIP;Restore tones by applying gamma before and after Retinex. Different from Retinex curves or others curves (Lab, Exposure, etc.).
-!TP_RETINEX_GRAD;Transmission gradient
-!TP_RETINEX_GRADS;Strength gradient
-!TP_RETINEX_GRADS_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Strength is reduced when iterations increase, and conversely.
-!TP_RETINEX_GRAD_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Variance and Threshold are reduced when iterations increase, and conversely.
-!TP_RETINEX_HIGH;High
-!TP_RETINEX_HIGHLIG;Highlight
-!TP_RETINEX_HIGHLIGHT;Highlight threshold
-!TP_RETINEX_HIGHLIGHT_TOOLTIP;Increase action of High algorithm.\nMay require you to re-adjust "Neighboring pixels" and to increase the "White-point correction" in the Raw tab -> Raw White Points tool.
-!TP_RETINEX_HSLSPACE_LIN;HSL-Linear
-!TP_RETINEX_HSLSPACE_LOG;HSL-Logarithmic
-!TP_RETINEX_ITER;Iterations (Tone-mapping)
-!TP_RETINEX_ITERF;Tone mapping
-!TP_RETINEX_ITER_TOOLTIP;Simulate a tone-mapping operator.\nHigh values increase the processing time.
-!TP_RETINEX_LABEL;Retinex
-!TP_RETINEX_LABEL_MASK;Mask
-!TP_RETINEX_LABSPACE;L*a*b*
-!TP_RETINEX_LOW;Low
-!TP_RETINEX_MAP;Method
-!TP_RETINEX_MAP_GAUS;Gaussian mask
-!TP_RETINEX_MAP_MAPP;Sharp mask (wavelet partial)
-!TP_RETINEX_MAP_MAPT;Sharp mask (wavelet total)
-!TP_RETINEX_MAP_METHOD_TOOLTIP;Use the mask generated by the Gaussian function above (Radius, Method) to reduce halos and artifacts.\n\nCurve only: apply a diagonal contrast curve on the mask.\nBeware of artifacts!\n\nGaussian mask: generate and use a Gaussian blur of the original mask.\nQuick.\n\nSharp mask: generate and use a wavelet on the original mask.\nSlow.
-!TP_RETINEX_MAP_NONE;None
-!TP_RETINEX_MEDIAN;Transmission median filter
-!TP_RETINEX_METHOD;Method
-!TP_RETINEX_METHOD_TOOLTIP;Low = Reinforce low light.\nUniform = Equalize action.\nHigh = Reinforce high light.\nHighlights = Remove magenta in highlights.
-!TP_RETINEX_MLABEL;Restored haze-free Min=%1 Max=%2
-!TP_RETINEX_MLABEL_TOOLTIP;Should be near min=0 max=32768\nRestored image with no mixture.
-!TP_RETINEX_NEIGHBOR;Radius
-!TP_RETINEX_NEUTRAL;Reset
-!TP_RETINEX_NEUTRAL_TIP;Reset all sliders and curves to their default values.
-!TP_RETINEX_OFFSET;Offset (brightness)
-!TP_RETINEX_SCALES;Gaussian gradient
-!TP_RETINEX_SCALES_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Scale and radius are reduced when iterations increase, and conversely.
-!TP_RETINEX_SETTINGS;Settings
-!TP_RETINEX_SKAL;Scale
-!TP_RETINEX_SLOPE;Free gamma slope
-!TP_RETINEX_STRENGTH;Strength
-!TP_RETINEX_THRESHOLD;Threshold
-!TP_RETINEX_THRESHOLD_TOOLTIP;Limits in/out.\nIn = image source,\nOut = image gauss.
-!TP_RETINEX_TLABEL;TM Min=%1 Max=%2 Mean=%3 Sigma=%4
-!TP_RETINEX_TLABEL2;TM Tm=%1 TM=%2
-!TP_RETINEX_TLABEL_TOOLTIP;Transmission map result.\nMin and Max are used by Variance.\nMean and Sigma.\nTm=Min TM=Max of transmission map.
-!TP_RETINEX_TRANF;Transmission
-!TP_RETINEX_TRANSMISSION;Transmission map
-!TP_RETINEX_TRANSMISSION_TOOLTIP;Transmission according to transmission.\nAbscissa: transmission from negative values (min), mean, and positives values (max).\nOrdinate: amplification or reduction.
-!TP_RETINEX_UNIFORM;Uniform
-!TP_RETINEX_VARIANCE;Contrast
-!TP_RETINEX_VARIANCE_TOOLTIP;Low variance increase local contrast and saturation, but can lead to artifacts.
-!TP_RETINEX_VIEW;Process
-!TP_RETINEX_VIEW_MASK;Mask
-!TP_RETINEX_VIEW_METHOD_TOOLTIP;Standard - Normal display.\nMask - Displays the mask.\nUnsharp mask - Displays the image with a high radius unsharp mask.\nTransmission - Auto/Fixed - Displays the file transmission-map, before any action on contrast and brightness.\n\nAttention: the mask does not correspond to reality, but is amplified to make it more visible.
-!TP_RETINEX_VIEW_NONE;Standard
-!TP_RETINEX_VIEW_TRAN;Transmission - Auto
-!TP_RETINEX_VIEW_TRAN2;Transmission - Fixed
-!TP_RETINEX_VIEW_UNSHARP;Unsharp mask
-!TP_RGBCURVES_BLUE;B
-!TP_RGBCURVES_CHANNEL;Channel
-!TP_RGBCURVES_GREEN;G
-!TP_RGBCURVES_LABEL;RGB Curves
-!TP_RGBCURVES_LUMAMODE;Luminosity mode
-!TP_RGBCURVES_LUMAMODE_TOOLTIP;Luminosity mode allows to vary the contribution of R, G and B channels to the luminosity of the image, without altering image color.
-!TP_RGBCURVES_RED;R
-!TP_SAVEDIALOG_OK_TIP;Shortcut: Ctrl-Enter
-!TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
-!TP_SHARPENEDGE_AMOUNT;Quantity
-!TP_SHARPENEDGE_LABEL;Edges
-!TP_SHARPENEDGE_PASSES;Iterations
-!TP_SHARPENEDGE_THREE;Luminance only
-!TP_SHARPENING_BLUR;Blur radius
-!TP_SHARPENING_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_AMOUNT;Quantity
-!TP_SHARPENMICRO_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_LABEL;Microcontrast
-!TP_SHARPENMICRO_MATRIX;3×3 matrix instead of 5×5
-!TP_SHARPENMICRO_UNIFORMITY;Uniformity
-!TP_SOFTLIGHT_LABEL;Soft Light
-!TP_SOFTLIGHT_STRENGTH;Strength
-!TP_TM_FATTAL_AMOUNT;Amount
-!TP_TM_FATTAL_ANCHOR;Anchor
-!TP_TM_FATTAL_LABEL;Dynamic Range Compression
-!TP_TM_FATTAL_THRESHOLD;Detail
-!TP_VIBRANCE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES;HH
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_LABEL;Skin-tones
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE1;Red/Purple
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE2;Red
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE3;Red/Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE4;Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_TOOLTIP;Hue according to hue H=f(H)
-!TP_VIBRANCE_LABEL;Vibrance
-!TP_VIBRANCE_PASTELS;Pastel Tones
-!TP_VIBRANCE_PASTSATTOG;Link pastel and saturated tones
-!TP_VIBRANCE_PROTECTSKINS;Protect skin-tones
-!TP_VIBRANCE_PSTHRESHOLD;Pastel/saturated tones threshold
-!TP_VIBRANCE_PSTHRESHOLD_SATTHRESH;Saturation threshold
-!TP_VIBRANCE_PSTHRESHOLD_TOOLTIP;The vertical axis represents pastel tones at the bottom and saturated tones at the top.\nThe horizontal axis represents the saturation range.
-!TP_VIBRANCE_PSTHRESHOLD_WEIGTHING;Pastel/saturated transition's weighting
-!TP_VIBRANCE_SATURATED;Saturated Tones
-!TP_VIGNETTING_CENTER;Center
-!TP_VIGNETTING_CENTER_X;Center X
-!TP_VIGNETTING_CENTER_Y;Center Y
-!TP_VIGNETTING_STRENGTH;Strength
-!TP_WAVELET_1;Level 1
-!TP_WAVELET_2;Level 2
-!TP_WAVELET_3;Level 3
-!TP_WAVELET_4;Level 4
-!TP_WAVELET_5;Level 5
-!TP_WAVELET_6;Level 6
-!TP_WAVELET_7;Level 7
-!TP_WAVELET_8;Level 8
-!TP_WAVELET_9;Level 9
-!TP_WAVELET_APPLYTO;Apply To
-!TP_WAVELET_AVOID;Avoid color shift
-!TP_WAVELET_B0;Black
-!TP_WAVELET_B1;Grey
-!TP_WAVELET_B2;Residual
-!TP_WAVELET_BACKGROUND;Background
-!TP_WAVELET_BACUR;Curve
-!TP_WAVELET_BALANCE;Contrast balance d/v-h
-!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified.
-!TP_WAVELET_BALCHRO;Chroma balance
-!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance.
-!TP_WAVELET_BANONE;None
-!TP_WAVELET_BASLI;Slider
-!TP_WAVELET_BATYPE;Contrast balance method
-!TP_WAVELET_CBENAB;Toning and Color Balance
-!TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted
-!TP_WAVELET_CCURVE;Local contrast
-!TP_WAVELET_CH1;Whole chroma range
-!TP_WAVELET_CH2;Saturated/pastel
-!TP_WAVELET_CH3;Link contrast levels
-!TP_WAVELET_CHCU;Curve
-!TP_WAVELET_CHR;Chroma-contrast link strength
-!TP_WAVELET_CHRO;Saturated/pastel threshold
-!TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored.
-!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength"
-!TP_WAVELET_CHSL;Sliders
-!TP_WAVELET_CHTYPE;Chrominance method
-!TP_WAVELET_COLORT;Opacity Red-Green
-!TP_WAVELET_COMPCONT;Contrast
-!TP_WAVELET_COMPGAMMA;Compression gamma
-!TP_WAVELET_COMPGAMMA_TOOLTIP;Adjusting the gamma of the residual image allows you to equilibrate the data and histogram.
-!TP_WAVELET_COMPTM;Tone mapping
-!TP_WAVELET_CONTEDIT;'After' contrast curve
-!TP_WAVELET_CONTR;Gamut
-!TP_WAVELET_CONTRA;Contrast
-!TP_WAVELET_CONTRAST_MINUS;Contrast -
-!TP_WAVELET_CONTRAST_PLUS;Contrast +
-!TP_WAVELET_CONTRA_TOOLTIP;Changes contrast of the residual image.
-!TP_WAVELET_CTYPE;Chrominance control
-!TP_WAVELET_CURVEEDITOR_CC_TOOLTIP;Modifies local contrast as a function of the original local contrast (abscissa).\nLow abscissa values represent small local contrast (real values about 10..20).\n50% abscissa represents average local contrast (real value about 100..300).\n66% abscissa represents standard deviation of local contrast (real value about 300..800).\n100% abscissa represents maximum local contrast (real value about 3000..8000).
-!TP_WAVELET_CURVEEDITOR_CH;Contrast levels=f(Hue)
-!TP_WAVELET_CURVEEDITOR_CH_TOOLTIP;Modifies each level's contrast as a function of hue.\nTake care not to overwrite changes made with the Gamut sub-tool's hue controls.\nThe curve will only have an effect when wavelet contrast level sliders are non-zero.
-!TP_WAVELET_CURVEEDITOR_CL;L
-!TP_WAVELET_CURVEEDITOR_CL_TOOLTIP;Applies a final contrast luminance curve at the end of the wavelet treatment.
-!TP_WAVELET_CURVEEDITOR_HH;HH
-!TP_WAVELET_CURVEEDITOR_HH_TOOLTIP;Modifies the residual image's hue as a function of hue.
-!TP_WAVELET_DALL;All directions
-!TP_WAVELET_DAUB;Edge performance
-!TP_WAVELET_DAUB2;D2 - low
-!TP_WAVELET_DAUB4;D4 - standard
-!TP_WAVELET_DAUB6;D6 - standard plus
-!TP_WAVELET_DAUB10;D10 - medium
-!TP_WAVELET_DAUB14;D14 - high
-!TP_WAVELET_DAUB_TOOLTIP;Changes Daubechies coefficients:\nD4 = Standard,\nD14 = Often best performance, 10% more time-intensive.\n\nAffects edge detection as well as the general quality of the firsts levels. However the quality is not strictly related to this coefficient and can vary with images and uses.
-!TP_WAVELET_DONE;Vertical
-!TP_WAVELET_DTHR;Diagonal
-!TP_WAVELET_DTWO;Horizontal
-!TP_WAVELET_EDCU;Curve
-!TP_WAVELET_EDGCONT;Local contrast
-!TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, top-left, top-right and bottom-right represent respectively local contrast for low values, mean, mean+stdev and maxima.
-!TP_WAVELET_EDGE;Edge Sharpness
-!TP_WAVELET_EDGEAMPLI;Base amplification
-!TP_WAVELET_EDGEDETECT;Gradient sensitivity
-!TP_WAVELET_EDGEDETECTTHR;Threshold low (noise)
-!TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection)
-!TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky.
-!TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise.
-!TP_WAVELET_EDGESENSI;Edge sensitivity
-!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
-!TP_WAVELET_EDGTHRESH;Detail
-!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
-!TP_WAVELET_EDRAD;Radius
-!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
-!TP_WAVELET_EDSL;Threshold Sliders
-!TP_WAVELET_EDTYPE;Local contrast method
-!TP_WAVELET_EDVAL;Strength
-!TP_WAVELET_FINAL;Final Touchup
-!TP_WAVELET_FINEST;Finest
-!TP_WAVELET_HIGHLIGHT;Highlight luminance range
-!TP_WAVELET_HS1;Whole luminance range
-!TP_WAVELET_HS2;Shadows/Highlights
-!TP_WAVELET_HUESKIN;Skin hue
-!TP_WAVELET_HUESKIN_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_HUESKY;Sky hue
-!TP_WAVELET_HUESKY_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_ITER;Delta balance levels
-!TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels.
-!TP_WAVELET_LABEL;Wavelet Levels
-!TP_WAVELET_LARGEST;Coarsest
-!TP_WAVELET_LEVCH;Chroma
-!TP_WAVELET_LEVDIR_ALL;All levels in all directions
-!TP_WAVELET_LEVDIR_INF;Below or equal the level
-!TP_WAVELET_LEVDIR_ONE;One level
-!TP_WAVELET_LEVDIR_SUP;Above the level
-!TP_WAVELET_LEVELS;Wavelet levels
-!TP_WAVELET_LEVELS_TOOLTIP;Choose the number of detail levels the image is to be decomposed into. More levels require more RAM and require a longer processing time.
-!TP_WAVELET_LEVF;Contrast
-!TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1
-!TP_WAVELET_LEVONE;Level 2
-!TP_WAVELET_LEVTHRE;Level 4
-!TP_WAVELET_LEVTWO;Level 3
-!TP_WAVELET_LEVZERO;Level 1
-!TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength
-!TP_WAVELET_LIPST;Enhanced algoritm
-!TP_WAVELET_LOWLIGHT;Shadow luminance range
-!TP_WAVELET_MEDGREINF;First level
-!TP_WAVELET_MEDI;Reduce artifacts in blue sky
-!TP_WAVELET_MEDILEV;Edge detection
-!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine.
-!TP_WAVELET_NEUTRAL;Neutral
-!TP_WAVELET_NOIS;Denoise
-!TP_WAVELET_NOISE;Denoise and Refine
-!TP_WAVELET_NPHIGH;High
-!TP_WAVELET_NPLOW;Low
-!TP_WAVELET_NPNONE;None
-!TP_WAVELET_NPTYPE;Neighboring pixels
-!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced.
-!TP_WAVELET_OPACITY;Opacity Blue-Yellow
-!TP_WAVELET_OPACITYW;Contrast balance d/v-h curve
-!TP_WAVELET_OPACITYWL;Final local contrast
-!TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right.
-!TP_WAVELET_PASTEL;Pastel chroma
-!TP_WAVELET_PROC;Process
-!TP_WAVELET_RE1;Reinforced
-!TP_WAVELET_RE2;Unchanged
-!TP_WAVELET_RE3;Reduced
-!TP_WAVELET_RESCHRO;Chroma
-!TP_WAVELET_RESCON;Shadows
-!TP_WAVELET_RESCONH;Highlights
-!TP_WAVELET_RESID;Residual Image
-!TP_WAVELET_SAT;Saturated chroma
-!TP_WAVELET_SETTINGS;Wavelet Settings
-!TP_WAVELET_SKIN;Skin targetting/protection
-!TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_WAVELET_SKY;Sky targetting/protection
-!TP_WAVELET_SKY_TOOLTIP;At -100 sky-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 sky-tones are protected while all other tones are affected.
-!TP_WAVELET_STREN;Strength
-!TP_WAVELET_STRENGTH;Strength
-!TP_WAVELET_SUPE;Extra
-!TP_WAVELET_THR;Shadows threshold
-!TP_WAVELET_THRESHOLD;Highlight levels
-!TP_WAVELET_THRESHOLD2;Shadow levels
-!TP_WAVELET_THRESHOLD2_TOOLTIP;Only levels between 9 and 9 minus the value will be affected by the shadow luminance range. Other levels will be fully treated. The highest level possible is limited by the highlight level value (9 minus highlight level value).
-!TP_WAVELET_THRESHOLD_TOOLTIP;Only levels beyond the chosen value will be affected by the highlight luminance range. Other levels will be fully treated. The chosen value here limits the highest possible value of the shadow levels.
-!TP_WAVELET_THRH;Highlights threshold
-!TP_WAVELET_TILESBIG;Big tiles
-!TP_WAVELET_TILESFULL;Full image
-!TP_WAVELET_TILESIZE;Tiling method
-!TP_WAVELET_TILESLIT;Little tiles
-!TP_WAVELET_TILES_TOOLTIP;Processing the full image leads to better quality and is the recommended option, while using tiles is a fall-back solution for users with little RAM. Refer to RawPedia for memory requirements.
-!TP_WAVELET_TMSTRENGTH;Compression strength
-!TP_WAVELET_TMSTRENGTH_TOOLTIP;Control the strength of tone mapping or contrast compression of the residual image. When the value is different from 0, the Strength and Gamma sliders of the Tone Mapping tool in the Exposure tab will become grayed out.
-!TP_WAVELET_TMTYPE;Compression method
-!TP_WAVELET_TON;Toning
-!TP_WBALANCE_CLOUDY;Cloudy
-!TP_WBALANCE_DAYLIGHT;Daylight (sunny)
-!TP_WBALANCE_EQBLUERED;Blue/Red equalizer
-!TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behavior of "white balance" by modulating the blue/red balance.\nThis can be useful when shooting conditions:\na) are far from the standard illuminant (e.g. underwater),\nb) are far from conditions where calibrations were performed,\nc) where the matrices or ICC profiles are unsuitable.
-!TP_WBALANCE_FLASH55;Leica
-!TP_WBALANCE_FLASH60;Standard, Canon, Pentax, Olympus
-!TP_WBALANCE_FLASH65;Nikon, Panasonic, Sony, Minolta
-!TP_WBALANCE_FLASH_HEADER;Flash
-!TP_WBALANCE_FLUO1;F1 - Daylight
-!TP_WBALANCE_FLUO2;F2 - Cool White
-!TP_WBALANCE_FLUO3;F3 - White
-!TP_WBALANCE_FLUO4;F4 - Warm White
-!TP_WBALANCE_FLUO5;F5 - Daylight
-!TP_WBALANCE_FLUO6;F6 - Lite White
-!TP_WBALANCE_FLUO7;F7 - D65 Daylight Simulator
-!TP_WBALANCE_FLUO8;F8 - D50 / Sylvania F40 Design
-!TP_WBALANCE_FLUO9;F9 - Cool White Deluxe
-!TP_WBALANCE_FLUO10;F10 - Philips TL85
-!TP_WBALANCE_FLUO11;F11 - Philips TL84
-!TP_WBALANCE_FLUO12;F12 - Philips TL83
-!TP_WBALANCE_FLUO_HEADER;Fluorescent
-!TP_WBALANCE_GTI;GTI
-!TP_WBALANCE_HMI;HMI
-!TP_WBALANCE_JUDGEIII;JudgeIII
-!TP_WBALANCE_LAMP_HEADER;Lamp
-!TP_WBALANCE_LED_CRS;CRS SP12 WWMR16
-!TP_WBALANCE_LED_HEADER;LED
-!TP_WBALANCE_LED_LSI;LSI Lumelex 2040
-!TP_WBALANCE_PICKER;Pick
-!TP_WBALANCE_SHADE;Shade
-!TP_WBALANCE_SOLUX35;Solux 3500K
-!TP_WBALANCE_SOLUX41;Solux 4100K
-!TP_WBALANCE_SOLUX47;Solux 4700K (vendor)
-!TP_WBALANCE_SOLUX47_NG;Solux 4700K (Nat. Gallery)
-!TP_WBALANCE_TEMPBIAS;AWB temperature bias
-!TP_WBALANCE_TEMPBIAS_TOOLTIP;Allows to alter the computation of the "auto white balance"\nby biasing it towards warmer or cooler temperatures. The bias\nis expressed as a percentage of the computed temperature,\nso that the result is given by "computedTemp + computedTemp * bias".
-!TP_WBALANCE_TUNGSTEN;Tungsten
-!TP_WBALANCE_WATER1;UnderWater 1
-!TP_WBALANCE_WATER2;UnderWater 2
-!TP_WBALANCE_WATER_HEADER;UnderWater
-!ZOOMPANEL_ZOOMFITCROPSCREEN;Fit crop to screen\nShortcut: f
diff --git a/rtdata/languages/Suomi b/rtdata/languages/Suomi
deleted file mode 100644
index eac9c0821..000000000
--- a/rtdata/languages/Suomi
+++ /dev/null
@@ -1,2329 +0,0 @@
-#01 2009-05-03 T. Kauppinen
-
-CURVEEDITOR_LINEAR;Suora
-CURVEEDITOR_LOADDLGLABEL;Lataa käyrä...
-CURVEEDITOR_SAVEDLGLABEL;Tallenna käyrä...
-CURVEEDITOR_TOOLTIPLINEAR;Palauta suoraksi
-CURVEEDITOR_TOOLTIPLOAD;Lataa käyrä tiedostosta
-CURVEEDITOR_TOOLTIPSAVE;Tallenna käyrä
-DIRBROWSER_FOLDERS;Kansiot
-EXIFFILTER_APERTURE;Aukko
-EXIFFILTER_CAMERA;Kamera
-EXIFFILTER_FOCALLEN;Polttoväli
-EXIFFILTER_ISO;ISO
-EXIFFILTER_LENS;Objektiivi
-EXIFFILTER_SHUTTER;Suljinaika
-EXIFPANEL_ADDEDIT;Lisää/Muokkaa
-EXIFPANEL_ADDEDITHINT;Lisää uusi EXIF-tieto tai muokkaa olemassaolevaa
-EXIFPANEL_ADDTAGDLG_ENTERVALUE;Uusi arvo
-EXIFPANEL_ADDTAGDLG_SELECTTAG;Valitse
-EXIFPANEL_ADDTAGDLG_TITLE;Lisää/Muokkaa
-EXIFPANEL_KEEP;Pidä
-EXIFPANEL_KEEPHINT;Pidä valitut tallennettaessa
-EXIFPANEL_REMOVE;Poista
-EXIFPANEL_REMOVEHINT;Poista valitut tallennettaessa
-EXIFPANEL_RESET;Palauta
-EXIFPANEL_RESETALL;Palauta kaikki
-EXIFPANEL_RESETALLHINT;Palauta kaikki alkuperäisiksi
-EXIFPANEL_RESETHINT;Palauta valitut alkuperäisiksi
-EXIFPANEL_SUBDIRECTORY;Alihakemisto
-FILEBROWSER_APPLYPROFILE;Käytä profiilia
-FILEBROWSER_CLEARPROFILE;Tyhjennä profiili
-FILEBROWSER_COPYPROFILE;Kopioi profiili
-FILEBROWSER_DELETEDLGLABEL;Tiedostojen poisto
-FILEBROWSER_DELETEDLGMSG;Haluatko varmasti poistaa valitut %1 tiedostoa?
-FILEBROWSER_EMPTYTRASH;Tyhjennä roskakori
-FILEBROWSER_EMPTYTRASHHINT;Poistaa pysyvästi tiedostot roskakorista
-FILEBROWSER_PARTIALPASTEPROFILE;Liitä valiten..
-FILEBROWSER_PASTEPROFILE;Liitä profiili
-FILEBROWSER_POPUPCANCELJOB;Peruuta työ
-FILEBROWSER_POPUPMOVEEND;Siirrä jonon viimeiseksi
-FILEBROWSER_POPUPMOVEHEAD;Siirrä jonon ensimmäiseksi
-FILEBROWSER_POPUPOPEN;Avaa
-FILEBROWSER_POPUPOPENINEDITOR;Avaa Editor
-FILEBROWSER_POPUPPROCESS;Laita käsittelyjonoon
-FILEBROWSER_POPUPREMOVE;Poista kokonaan
-FILEBROWSER_POPUPRENAME;Nimeä uudelleen..
-FILEBROWSER_POPUPSELECTALL;Valitse kaikki
-FILEBROWSER_POPUPTRASH;Siirrä roskakoriin
-FILEBROWSER_POPUPUNRANK;Poista arvostelu
-FILEBROWSER_POPUPUNTRASH;Pelasta roskakorista
-FILEBROWSER_RENAMEDLGLABEL;Nimeä uudelleen
-FILEBROWSER_SHOWDIRHINT;Näytä hakemiston kaikki kuvat
-FILEBROWSER_SHOWRANK1HINT;Näytä 1 tähden kuvat
-FILEBROWSER_SHOWRANK2HINT;Näytä 2 tähden kuvat
-FILEBROWSER_SHOWRANK3HINT;Näytä 3 tähden kuvat
-FILEBROWSER_SHOWRANK4HINT;Näytä 4 tähden kuvat
-FILEBROWSER_SHOWRANK5HINT;Näytä 5 tähden kuvat
-FILEBROWSER_SHOWTRASHHINT;Näytä roskakorin sisältö
-FILEBROWSER_SHOWUNRANKHINT;Näytä arvostelemattomat kuvat
-FILEBROWSER_THUMBSIZE;Esikatselun koko
-FILEBROWSER_ZOOMINHINT;Kasvata esikatselukuvien kokoa
-FILEBROWSER_ZOOMOUTHINT;Pienennä esikatselukuvien kokoa
-GENERAL_ABOUT;Tietoja
-GENERAL_CANCEL;Peruuta
-GENERAL_DISABLE;Pois
-GENERAL_DISABLED;Pois
-GENERAL_ENABLE;Päälle
-GENERAL_ENABLED;Päällä
-GENERAL_LANDSCAPE;Vaaka
-GENERAL_NA;-
-GENERAL_NO;Ei
-GENERAL_OK;OK
-GENERAL_PORTRAIT;Pysty
-GENERAL_SAVE;Tallenna
-HISTOGRAM_TOOLTIP_B;Näytä/piilota SININEN
-HISTOGRAM_TOOLTIP_G;Näytä/piilota VIHREÄ
-HISTOGRAM_TOOLTIP_L;Näytä/piilota CIELAB luminanssi
-HISTOGRAM_TOOLTIP_R;Näytä/piilota PUNAINEN
-HISTORY_CHANGED;Muutettu
-HISTORY_CUSTOMCURVE;Oma käyrä
-HISTORY_FROMCLIPBOARD;Leikepöydältä
-HISTORY_LABEL;Historia
-HISTORY_MSG_1;Kuva ladattu
-HISTORY_MSG_2;Profiili ladattu
-HISTORY_MSG_3;Profiili vaihdettu
-HISTORY_MSG_4;Historian selaus
-HISTORY_MSG_5;Valotus\nKirkkaus
-HISTORY_MSG_6;Valotus\nKontrasti
-HISTORY_MSG_7;Valotus\nTummuus
-HISTORY_MSG_8;Valotus\nKompensointi
-HISTORY_MSG_9;Valotus\nVaaleiden alueiden vaimennus
-HISTORY_MSG_10;Valotuksen säätö\nTummien alueiden vaimennus
-HISTORY_MSG_11;Valotuksen säätö\nSävykäyrä
-HISTORY_MSG_12;Valotuksen säätö\nAutomaattinen
-HISTORY_MSG_13;Valotuksen säätö\nAutomaattisen valotuksen raja
-HISTORY_MSG_14;Luminanssi\nKirkkaus
-HISTORY_MSG_15;Luminanssi\nKontrasti
-HISTORY_MSG_16;Luminanssi\nTummuus
-HISTORY_MSG_17;Luminanssi\nVaaleiden alueiden vaimennus
-HISTORY_MSG_18;Luminanssi\nTummien alueiden vaimennus
-HISTORY_MSG_19;Luminanssi\nKäyrä
-HISTORY_MSG_20;Terävöinti
-HISTORY_MSG_21;Terävöinti\nEpäterävä maski: Säde
-HISTORY_MSG_22;Terävöinti\nEpäterävä maski: Määrä
-HISTORY_MSG_23;Terävöinti\nEpäterävä maski: Kynnys
-HISTORY_MSG_24;Terävöinti\nEpäterävä maski: Vain reunat
-HISTORY_MSG_25;Terävöinti\nEpäterävä maski: Reunatunnistuksen säde
-HISTORY_MSG_26;Terävöinti\nEpäterävä maski: Reunatunnistuksen herkkyys
-HISTORY_MSG_27;Terävöinti\nEpäterävä maski: Halo-ilmiön esto
-HISTORY_MSG_28;Terävöinti\nEpäterävä maski: Halo-ilmiön eston määrä
-HISTORY_MSG_29;Terävöinti\nMenetelmä
-HISTORY_MSG_30;Terävöinti\nDekonvoluutio: Säde
-HISTORY_MSG_31;Terävöinti\nDekonvoluutio: Määrä
-HISTORY_MSG_32;Terävöinti\nDekonvoluutio: Vaimennus
-HISTORY_MSG_33;Terävöinti\nDekonvoluutio: Iteraatiot
-HISTORY_MSG_34;Värikylläisyys\nVältä leikkautuminen
-HISTORY_MSG_35;Värikylläisyys\nEstä kyllästyminen
-HISTORY_MSG_36;Värikylläisyys\nKyllästymisraja
-HISTORY_MSG_37;Värikylläisyys
-HISTORY_MSG_38;Valkotasapaino\nMenetelmä
-HISTORY_MSG_39;Valkotasapaino\nLämpötila [K]
-HISTORY_MSG_40;Valkotasapaino\nValkoisen sävy
-HISTORY_MSG_41;Värisävy\nvihreä-punainen
-HISTORY_MSG_42;Värisävy\nsininen-keltainen
-HISTORY_MSG_43;Luminanssin kohinanvaimennus
-HISTORY_MSG_44;Luminanssin kohinanvaimennus\nSäde
-HISTORY_MSG_45;Luminanssin kohinanvaimennus\nReunan tunnistusherkkyys
-HISTORY_MSG_46;Värin kohinanvaimennus
-HISTORY_MSG_47;Värin kohinanvaimennus\nSäde
-HISTORY_MSG_48;Värin kohinanvaimennus\nReunan tunnistusherkkyys
-HISTORY_MSG_49;Värin kohinanvaimennus\nReunaherkkä
-HISTORY_MSG_50;Tummat/vaaleat alueet
-HISTORY_MSG_51;Tummat/vaaleat alueet\nVaaleiden alueiden vaimennus
-HISTORY_MSG_52;Tummat/vaaleat alueet\nTummien alueiden vaimennus
-HISTORY_MSG_53;Tummat/vaaleat alueet\nVaalean sävyalueen laajuus
-HISTORY_MSG_54;Tummat/vaaleat alueet\nTumman sävyalueen laajuus
-HISTORY_MSG_55;Tummat/vaaleat alueet\nPaikallinen kontrasti
-HISTORY_MSG_56;Tummat/vaaleat alueet\nSäde
-HISTORY_MSG_57;Kääntö
-HISTORY_MSG_58;Peilaa vaakasuunnassa
-HISTORY_MSG_59;Peilaa pystysuunnassa
-HISTORY_MSG_60;Oikaisu
-HISTORY_MSG_61;Kääntö
-HISTORY_MSG_62;Linssivääristymän korjaus
-HISTORY_MSG_63;Pikakuva valittu
-HISTORY_MSG_64;Rajaus
-HISTORY_MSG_65;Värivääristymän korjaus
-HISTORY_MSG_66;Huippuvaloalueiden palautus
-HISTORY_MSG_67;Huippuvaloalueiden palautus\nMäärä
-HISTORY_MSG_68;Huippuvaloalueiden palautus\nMenetelmä
-HISTORY_MSG_69;Työväriprofiili
-HISTORY_MSG_70;Tulosväriprofiili
-HISTORY_MSG_71;Lähdeväriprofiili
-HISTORY_MSG_72;Vinjetoinnin korjaus
-HISTORY_MSG_73;Kanavat
-HISTORY_MSG_74;Koko
-HISTORY_MSG_75;Koko\nMenetelmä
-HISTORY_MSG_76;EXIF-tiedot
-HISTORY_MSG_77;IPTC-tiedot
-HISTORY_MSG_78;Data specified for resize
-HISTORY_MSG_79;Resize width
-HISTORY_MSG_80;Resize height
-HISTORY_MSG_81;Resize enabled
-HISTORY_NEWSNAPSHOT;Uusi pikakuva
-HISTORY_SNAPSHOT;Pikakuva
-HISTORY_SNAPSHOTS;Pikakuvat
-IPTCPANEL_CATEGORY;Aiheryhmä
-IPTCPANEL_CITY;Kaupunki
-IPTCPANEL_COPYHINT;Kopioi IPTC tiedot leikepöydälle
-IPTCPANEL_COUNTRY;Maa
-IPTCPANEL_CREDIT;Välittäjä
-IPTCPANEL_CREDITHINT;(Credit) Välittäjän tiedot.
-IPTCPANEL_DATECREATED;Päivämäärä
-IPTCPANEL_EMBEDDED;Kuvan oma
-IPTCPANEL_EMBEDDEDHINT;Palauta kuvan IPTC tiedot
-IPTCPANEL_HEADLINE;Julkaistava otsikko
-IPTCPANEL_INSTRUCTIONS;Ohjeet
-IPTCPANEL_KEYWORDS;Avainsanat
-IPTCPANEL_PASTEHINT;Liitä IPTC tiedot leikepöydältä
-IPTCPANEL_RESET;Palauta
-IPTCPANEL_RESETHINT;Palauta profiilin oletukseen
-IPTCPANEL_SOURCE;Lähde
-IPTCPANEL_TITLE;Otsikko
-MAIN_BUTTON_PREFERENCES;Asetukset
-MAIN_BUTTON_SAVE;Tallenna kuva
-MAIN_BUTTON_SENDTOEDITOR;Avaa ulkoisessa ohjelmassa
-MAIN_FRAME_BATCHQUEUE;Batch Queue
-MAIN_FRAME_FILEBROWSER;File Browser
-MAIN_FRAME_PLACES;Places
-MAIN_FRAME_PLACES_ADD;Add
-MAIN_FRAME_RECENT;Recent Folders
-MAIN_MSG_ALREADYEXISTS;Tiedosto on jo olemassa.
-MAIN_MSG_CANNOTLOAD;Kuvaa ei voi avata
-MAIN_MSG_CANNOTSAVE;Tiedoston tallennusongelma
-MAIN_MSG_CANNOTSTARTEDITOR;Ulkoista ohjelmaa ei voi käynnistää
-MAIN_MSG_CANNOTSTARTEDITOR_SECONDARY;Tarkista ohjelman polku asetuksissa!
-MAIN_MSG_QOVERWRITE;Haluatko tallentaa päälle?
-MAIN_TAB_COLOR;Väri
-MAIN_TAB_DETAIL;Yksityiskohdat
-MAIN_TAB_DEVELOP;Develop
-MAIN_TAB_EXIF;EXIF
-MAIN_TAB_EXPOSURE;Valotus
-MAIN_TAB_FILTER;Filter
-MAIN_TAB_IPTC;IPTC
-MAIN_TAB_METADATA;Metatiedot
-MAIN_TAB_TRANSFORM;Muunnokset
-MAIN_TOOLTIP_HIDEHP;Näytä/piilota vasen ikkuna (pikanäppäin: H)
-MAIN_TOOLTIP_INDCLIPPEDH;Näytä leikkautuvat\nvaaleat alueet
-MAIN_TOOLTIP_INDCLIPPEDS;Näytä leikkautuvat\ntummat alueet
-MAIN_TOOLTIP_QINFO;Kuvan tiedot
-PARTIALPASTE_BASICGROUP;Perusasetukset
-PARTIALPASTE_CACORRECTION;Väripoikkeaman korjaus
-PARTIALPASTE_COARSETRANS;Vasen/oikea kääntö ja peilaus
-PARTIALPASTE_COLORGROUP;Väriasetukset
-PARTIALPASTE_COMPOSITIONGROUP;Muunnokset
-PARTIALPASTE_CROP;Rajaus
-PARTIALPASTE_DIALOGLABEL;Liitä valiten..
-PARTIALPASTE_DISTORTION;Linssivääristymän korjaus
-PARTIALPASTE_EXIFCHANGES;EXIF-tiedot
-PARTIALPASTE_EXPOSURE;Valotus
-PARTIALPASTE_ICMSETTINGS;ICM-profiili
-PARTIALPASTE_IPTCINFO;IPTC-tiedot
-PARTIALPASTE_LENSGROUP;Objektiiviin liittyvät asetukset
-PARTIALPASTE_METAGROUP;Metatiedot
-PARTIALPASTE_RESIZE;Koko
-PARTIALPASTE_ROTATION;Oikaisu
-PARTIALPASTE_SHADOWSHIGHLIGHTS;Tummat/vaaleat alueet
-PARTIALPASTE_SHARPENING;Terävöinti
-PARTIALPASTE_VIGNETTING;Vinjetoinnin korjaus
-PARTIALPASTE_WHITEBALANCE;Valkotasapaino
-PREFERENCES_APPLNEXTSTARTUP;käytössä käynnistyksen jälkeen
-PREFERENCES_CACHEMAXENTRIES;Välimuistin koko
-PREFERENCES_CACHEOPTS;Välimuistin asetukset
-PREFERENCES_CACHETHUMBHEIGHT;Suurin esikatselukuvan korkeus
-PREFERENCES_CLIPPINGIND;Leikkautuminen
-PREFERENCES_DATEFORMAT;Päivämäärän muoto
-PREFERENCES_DATEFORMATHINT;Voit käyttää seuraavia komentoja:\n%y : vuosi\n%m : kuukausi\n%d : päivä\n\nEsimerkiksi, pp.kk.vvvv:\n%d.%m.%y
-PREFERENCES_DIRHOME;Kotihakemisto
-PREFERENCES_DIRLAST;Viimeksi käytetty hakemisto
-PREFERENCES_DIROTHER;Muu
-PREFERENCES_DIRSELECTDLG;Valitse kuvahakemisto käynnistettäessä...
-PREFERENCES_DIRSOFTWARE;Asennushakemisto
-PREFERENCES_EXTERNALEDITOR;Ulkoinen ohjelma
-PREFERENCES_FBROWSEROPTS;Näytettävät tiedot
-PREFERENCES_FILEFORMAT;Tallennuksen asetukset
-PREFERENCES_FORIMAGE;Kuvatiedostoille
-PREFERENCES_FORRAW;RAW-tiedostoille
-PREFERENCES_GIMPPATH;GIMP:n asennushakemisto
-PREFERENCES_HLTHRESHOLD;Kynnysarvo vaaleille alueille
-PREFERENCES_ICCDIR;ICC-profiilien hakemisto
-PREFERENCES_IMPROCPARAMS;Oletuskäsittelyprofiilit
-PREFERENCES_INTENT_ABSOLUTE;Absoluuttinen kolorimetrinen
-PREFERENCES_INTENT_PERCEPTUAL;Havainnollinen
-PREFERENCES_INTENT_RELATIVE;Suhteellinen kolorimetrinen
-PREFERENCES_INTENT_SATURATION;Kylläisyyden säilyttävä
-PREFERENCES_OUTDIR;Tallennushakemisto
-PREFERENCES_OUTDIRFOLDER;Valitse hakemisto
-PREFERENCES_OUTDIRFOLDERHINT;Tallenna kuvat valittuun kansioon
-PREFERENCES_OUTDIRTEMPLATE;Ohjelmoi hakemisto
-PREFERENCES_OUTDIRTEMPLATEHINT;Voit käyttää seuraavia komentoja:\n%f tiedosto\n%p1, %p2, ... polku\n%d1, %d2, ..., hakemisto\nNämä komennot viittaavat RAW-tiedoston hakemistoihin ja polkuihin.\n\nEsimerkiksi: jos /home/tom/image/02-09-2006/dsc0012.nefon avattu, komennot tarkoittavat seuraavaa:\n%f=dsc0012\n%d1=02-09-2006, %d2=image,...\n%p1=/home/tom/image/02-09-2006, %p2=/home/tom/image, p3=/home/tom, ...\n\nJos haluat tallentaa alkuperäisen kuvan hakemistoon:\n%p1/%f\n\nJos haluat tallentaa hakemistoon nimeltä 'converted' joka sijaitsee alkuperäisen kuvan hakemistossa:\n%p1/converted/%f\n\nJos haluat tallentaa hakemistoon '/home/tom/image/converted' ja pitää päivämäärähakemistot:\n%p2/converted/%d1/%f
-PREFERENCES_PARSEDEXT;Käytössä olevat tunnisteet
-PREFERENCES_PARSEDEXTADD;Lisää tunniste
-PREFERENCES_PARSEDEXTADDHINT;Lisää tunniste
-PREFERENCES_PARSEDEXTDELHINT;Poista valitut tunnisteet listasta
-PREFERENCES_PROFILEHANDLING;Käsittelyprofiilit
-PREFERENCES_PROFILELOADPR;Ensisijainen profiili
-PREFERENCES_PROFILEPRCACHE;välimuisti
-PREFERENCES_PROFILEPRFILE;oheistiedosto
-PREFERENCES_PROFILESAVECACHE;Tallenna käsittelyparametrit välimuistiin
-PREFERENCES_PROFILESAVEINPUT;Tallenna käsittelyparametrit oheistiedostoon
-PREFERENCES_PSPATH;Adobe Photoshop:n asennushakemisto
-PREFERENCES_SELECTLANG;Valitse kieli
-PREFERENCES_SHOWBASICEXIF;Perus EXIF-tiedot
-PREFERENCES_SHOWDATETIME;Päivämäärä ja aika
-PREFERENCES_SHTHRESHOLD;Kynnysarvo tummille alueille
-PREFERENCES_STARTUPIMDIR;Kuvahakemisto käynnistettäessä
-PREFERENCES_TAB_BROWSER;Tiedostot
-PREFERENCES_TAB_COLORMGR;Värit
-PREFERENCES_TAB_GENERAL;Yleiset
-PREFERENCES_TAB_IMPROC;Kuvankäsittely
-PROFILEPANEL_LABEL;Käsittelyprofiili
-PROFILEPANEL_LOADDLGLABEL;Lataa käsittelyprofiili...
-PROFILEPANEL_PCUSTOM;Oma
-PROFILEPANEL_PFILE;Tiedostosta
-PROFILEPANEL_PLASTSAVED;Viimeisin tallennettu
-PROFILEPANEL_SAVEDLGLABEL;Tallenna käsittelyprofiili...
-PROFILEPANEL_TOOLTIPCOPY;Kopioi nykyinen profiili leikepöydälle
-PROFILEPANEL_TOOLTIPLOAD;Lataa profiili tiedostosta
-PROFILEPANEL_TOOLTIPPASTE;Liitä profiili leikepöydältä
-PROFILEPANEL_TOOLTIPSAVE;Tallenna profiili
-PROGRESSBAR_LOADING;Kuvaa ladataan...
-PROGRESSBAR_LOADJPEG;JPEG-tiedostoa ladataan...
-PROGRESSBAR_LOADPNG;PNG-tiedostoa ladataan...
-PROGRESSBAR_LOADTIFF;TIFF-tiedostoa ladataan...
-PROGRESSBAR_PROCESSING;Kuvaa käsitellään...
-PROGRESSBAR_READY;Valmis
-PROGRESSBAR_SAVEJPEG;JPEG-tiedostoa tallennetaan...
-PROGRESSBAR_SAVEPNG;PNG-tiedostoa tallennetaan...
-PROGRESSBAR_SAVETIFF;TIFF-tiedostoa tallennetaan...
-QINFO_ISO;ISO
-QINFO_NOEXIF;EXIF-tietoja ei saatavilla.
-SAVEDLG_FILEFORMAT;Tiedostomuoto
-SAVEDLG_JPEGQUAL;JPEG laatu (suurempi luku, parempi laatu)
-SAVEDLG_PNGCOMPR;PNG pakkaus (suurempi luku, enemmän pakkausta)
-SAVEDLG_PUTTOQUEUE;Laita käsittelyjonoon
-SAVEDLG_PUTTOQUEUEHEAD;Laita käsittelyjonon ensimmäiseksi
-SAVEDLG_PUTTOQUEUETAIL;Laita käsittelyjonon viimeiseksi
-SAVEDLG_SAVEIMMEDIATELY;Tallenna heti
-SAVEDLG_SAVESPP;Tallenna kuvankäsittelytiedot kuvan mukana
-SAVEDLG_TIFFUNCOMPRESSED;Uncompressed TIFF
-TOOLBAR_TOOLTIP_CROP;Valitse rajattava alue (pikanäppäin: C)
-TOOLBAR_TOOLTIP_HAND;Kuvan siirtotyökalu (pikanäppäin: N)
-TOOLBAR_TOOLTIP_STRAIGHTEN;Valitse suora linja (pikanäppäin: S)
-TOOLBAR_TOOLTIP_WB;Valitse valkotasapainon\nvalkea piste kuvasta (pikanäppäin: W)
-TP_CACORRECTION_BLUE;Sininen
-TP_CACORRECTION_LABEL;Väripoikkeaman korjaus
-TP_CACORRECTION_RED;Punainen
-TP_CHMIXER_BLUE;Sininen
-TP_CHMIXER_GREEN;Vihreä
-TP_CHMIXER_LABEL;Kanavat
-TP_CHMIXER_RED;Punainen
-TP_COARSETRAF_TOOLTIP_HFLIP;Peilaa vaakasuunnassa
-TP_COARSETRAF_TOOLTIP_ROTLEFT;Käännä vasemmalle
-TP_COARSETRAF_TOOLTIP_ROTRIGHT;Käännä oikealle
-TP_COARSETRAF_TOOLTIP_VFLIP;Peilaa pystysuunnassa
-TP_CROP_FIXRATIO;Pidä kuvasuhde:
-TP_CROP_GTDIAGONALS;Kulmien puolittajat
-TP_CROP_GTNONE;Ei mikään
-TP_CROP_GTRULETHIRDS;Kolmijako
-TP_CROP_GUIDETYPE;Sommittelumalli:
-TP_CROP_H;Kork.
-TP_CROP_LABEL;Rajaus
-TP_CROP_W;Lev.
-TP_CROP_X; x
-TP_CROP_Y; y
-TP_DISTORTION_AMOUNT;Määrä
-TP_DISTORTION_LABEL;Linssivääristymän korjaus
-TP_EXPOSURE_AUTOLEVELS;Automaattinen
-TP_EXPOSURE_BLACKLEVEL;Tummuus
-TP_EXPOSURE_BRIGHTNESS;Kirkkaus
-TP_EXPOSURE_CLIP;Raja
-TP_EXPOSURE_COMPRHIGHLIGHTS;Vaaleiden alueiden vaimennus
-TP_EXPOSURE_COMPRSHADOWS;Tummien alueiden vaimennus
-TP_EXPOSURE_CONTRAST;Kontrasti
-TP_EXPOSURE_CURVEEDITOR;Sävykäyrä
-TP_EXPOSURE_EXPCOMP;Kompensointi
-TP_EXPOSURE_LABEL;Valotuksen säätö
-TP_HLREC_CIELAB;CIELAB värisekoitus
-TP_HLREC_COLOR;Värin palautus
-TP_HLREC_LABEL;Huippuvaloalueiden palautus
-TP_HLREC_LUMINANCE;Luminanssin palautus
-TP_HLREC_METHOD;Menetelmä:
-TP_ICM_INPUTCAMERA;Kameran oletus
-TP_ICM_INPUTCUSTOM;Oma
-TP_ICM_INPUTDLGLABEL;Valitse lähteen ICC-profiili...
-TP_ICM_INPUTEMBEDDED;Käytä kuvan omaa, jos mahdollista
-TP_ICM_INPUTPROFILE;Lähdeväriprofiili
-TP_ICM_LABEL;ICM
-TP_ICM_NOICM;Ei ICM-profiilia: sRGB
-TP_ICM_OUTPUTPROFILE;Tulosväriprofiili
-TP_ICM_WORKINGPROFILE;Työväriprofiili
-TP_RAW_DMETHOD;Menetelmä
-TP_RAW_FALSECOLOR;Värivääristymien eston määrä
-TP_RESIZE_H;Kork.:
-TP_RESIZE_LABEL;Koko
-TP_RESIZE_METHOD;Menetelmä:
-TP_RESIZE_NEAREST;Lähin
-TP_RESIZE_SCALE;Mittakaava
-TP_RESIZE_W;Lev.:
-TP_ROTATE_DEGREE;Astetta
-TP_ROTATE_LABEL;Oikaisu
-TP_ROTATE_SELECTLINE;Valitse suora linja
-TP_SHADOWSHLIGHTS_HIGHLIGHTS;Vaaleiden alueiden vaimennus
-TP_SHADOWSHLIGHTS_HLTONALW;Vaalean sävyalueen laajuus
-TP_SHADOWSHLIGHTS_LABEL;Tummat/vaaleat alueet
-TP_SHADOWSHLIGHTS_LOCALCONTR;Paikallinen kontrasti
-TP_SHADOWSHLIGHTS_RADIUS;Säde
-TP_SHADOWSHLIGHTS_SHADOWS;Tummien alueiden vaimennus
-TP_SHADOWSHLIGHTS_SHTONALW;Tumman sävyalueen laajuus
-TP_SHARPENING_AMOUNT;Määrä
-TP_SHARPENING_EDRADIUS;Säde
-TP_SHARPENING_EDTOLERANCE;Reunan tunnistusherkkyys
-TP_SHARPENING_HALOCONTROL;Halo-ilmiön esto
-TP_SHARPENING_HCAMOUNT;Määrä
-TP_SHARPENING_LABEL;Terävöinti
-TP_SHARPENING_METHOD;Menetelmä
-TP_SHARPENING_ONLYEDGES;Terävöi vain reunat
-TP_SHARPENING_RADIUS;Säde
-TP_SHARPENING_RLD;RL dekonvoluutio
-TP_SHARPENING_RLD_AMOUNT;Määrä
-TP_SHARPENING_RLD_DAMPING;Vaimennus
-TP_SHARPENING_RLD_ITERATIONS;Iteraatiot
-TP_SHARPENING_THRESHOLD;Kynnys
-TP_SHARPENING_USM;Epäterävä maski
-TP_VIGNETTING_AMOUNT;Määrä
-TP_VIGNETTING_LABEL;Vinjetoinnin korjaus
-TP_VIGNETTING_RADIUS;Säde
-TP_WBALANCE_AUTO;Automaattinen
-TP_WBALANCE_CAMERA;Kamera
-TP_WBALANCE_CUSTOM;Oma
-TP_WBALANCE_GREEN;Valkoisen sävy
-TP_WBALANCE_LABEL;Valkotasapaino
-TP_WBALANCE_METHOD;Menetelmä
-TP_WBALANCE_SIZE;Koko:
-TP_WBALANCE_SPOTWB;Valitse valkoinen kuvasta
-TP_WBALANCE_TEMPERATURE;Lämpötila [K]
-#
-
-!!!!!!!!!!!!!!!!!!!!!!!!!
-! Untranslated keys follow; remove the ! prefix after an entry is translated.
-!!!!!!!!!!!!!!!!!!!!!!!!!
-
-!ABOUT_TAB_BUILD;Version
-!ABOUT_TAB_CREDITS;Credits
-!ABOUT_TAB_LICENSE;License
-!ABOUT_TAB_RELEASENOTES;Release Notes
-!ABOUT_TAB_SPLASH;Splash
-!ADJUSTER_RESET_TO_DEFAULT;Click - reset to default value.\nCtrl+click - reset to initial value.
-!BATCHQUEUE_AUTOSTART;Auto-start
-!BATCHQUEUE_AUTOSTARTHINT;Start processing automatically when a new job arrives.
-!BATCHQUEUE_DESTFILENAME;Path and file name
-!BATCHQUEUE_STARTSTOPHINT;Start or stop processing the images in the queue.\n\nShortcut: Ctrl+s
-!BATCH_PROCESSING;Batch Processing
-!CURVEEDITOR_AXIS_IN;I:
-!CURVEEDITOR_AXIS_LEFT_TAN;LT:
-!CURVEEDITOR_AXIS_OUT;O:
-!CURVEEDITOR_AXIS_RIGHT_TAN;RT:
-!CURVEEDITOR_CATMULLROM;Flexible
-!CURVEEDITOR_CURVE;Curve
-!CURVEEDITOR_CURVES;Curves
-!CURVEEDITOR_CUSTOM;Standard
-!CURVEEDITOR_DARKS;Darks
-!CURVEEDITOR_EDITPOINT_HINT;Enable edition of node in/out values.\n\nRight-click on a node to select it.\nRight-click on empty space to de-select the node.
-!CURVEEDITOR_HIGHLIGHTS;Highlights
-!CURVEEDITOR_LIGHTS;Lights
-!CURVEEDITOR_MINMAXCPOINTS;Equalizer
-!CURVEEDITOR_NURBS;Control cage
-!CURVEEDITOR_PARAMETRIC;Parametric
-!CURVEEDITOR_SHADOWS;Shadows
-!CURVEEDITOR_TOOLTIPCOPY;Copy current curve to clipboard.
-!CURVEEDITOR_TOOLTIPPASTE;Paste curve from clipboard.
-!CURVEEDITOR_TYPE;Type:
-!DONT_SHOW_AGAIN;Don't show this message again.
-!DYNPROFILEEDITOR_DELETE;Delete
-!DYNPROFILEEDITOR_EDIT;Edit
-!DYNPROFILEEDITOR_EDIT_RULE;Edit Dynamic Profile Rule
-!DYNPROFILEEDITOR_ENTRY_TOOLTIP;The matching is case insensitive.\nUse the "re:" prefix to enter\na regular expression.
-!DYNPROFILEEDITOR_IMGTYPE_ANY;Any
-!DYNPROFILEEDITOR_IMGTYPE_HDR;HDR
-!DYNPROFILEEDITOR_IMGTYPE_PS;Pixel Shift
-!DYNPROFILEEDITOR_IMGTYPE_STD;Standard
-!DYNPROFILEEDITOR_MOVE_DOWN;Move Down
-!DYNPROFILEEDITOR_MOVE_UP;Move Up
-!DYNPROFILEEDITOR_NEW;New
-!DYNPROFILEEDITOR_NEW_RULE;New Dynamic Profile Rule
-!DYNPROFILEEDITOR_PROFILE;Processing Profile
-!EDITWINDOW_TITLE;Image Edit
-!EDIT_OBJECT_TOOLTIP;Displays a widget on the preview window which lets you adjust this tool.
-!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
-!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
-!EXIFFILTER_FILETYPE;File type
-!EXIFFILTER_IMAGETYPE;Image type
-!EXIFFILTER_METADATAFILTER;Enable metadata filters
-!EXIFPANEL_SHOWALL;Show all
-!EXPORT_BYPASS;Processing steps to bypass
-!EXPORT_BYPASS_ALL;Select / Unselect All
-!EXPORT_BYPASS_DEFRINGE;Bypass Defringe
-!EXPORT_BYPASS_DIRPYRDENOISE;Bypass Noise Reduction
-!EXPORT_BYPASS_DIRPYREQUALIZER;Bypass Contrast by Detail Levels
-!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
-!EXPORT_BYPASS_RAW_CA;Bypass [raw] Chromatic Aberration Correction
-!EXPORT_BYPASS_RAW_CCSTEPS;Bypass [raw] False Color Suppression
-!EXPORT_BYPASS_RAW_DCB_ENHANCE;Bypass [raw] DCB Enhancement Steps
-!EXPORT_BYPASS_RAW_DCB_ITERATIONS;Bypass [raw] DCB Iterations
-!EXPORT_BYPASS_RAW_DF;Bypass [raw] Dark-Frame
-!EXPORT_BYPASS_RAW_FF;Bypass [raw] Flat-Field
-!EXPORT_BYPASS_RAW_GREENTHRESH;Bypass [raw] Green Equilibration
-!EXPORT_BYPASS_RAW_LINENOISE;Bypass [raw] Line Noise Filter
-!EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Bypass [raw] LMMSE Enhancement Steps
-!EXPORT_BYPASS_SHARPENEDGE;Bypass Edge Sharpening
-!EXPORT_BYPASS_SHARPENING;Bypass Sharpening
-!EXPORT_BYPASS_SHARPENMICRO;Bypass Microcontrast
-!EXPORT_BYPASS_SH_HQ;Bypass Sharp Mask Shadows/Highlights
-!EXPORT_FASTEXPORTOPTIONS;Fast Export Options
-!EXPORT_INSTRUCTIONS;Fast Export options provide overrides to bypass time and resource consuming development settings and to run queue processing using the fast export settings instead. This method is recommended for quicker generation of lower resolution images when speed is a priority or when resized output is desired for one or many images without making modifications to their saved development parameters.
-!EXPORT_MAXHEIGHT;Maximum height:
-!EXPORT_MAXWIDTH;Maximum width:
-!EXPORT_PIPELINE;Processing pipeline
-!EXPORT_PUTTOQUEUEFAST; Put to queue for fast export
-!EXPORT_RAW_DMETHOD;Demosaic method
-!EXPORT_USE_FAST_PIPELINE;Dedicated (full processing on resized image)
-!EXPORT_USE_FAST_PIPELINE_TIP;Use a dedicated processing pipeline for images in Fast Export mode, that trades speed for quality. Resizing of the image is done as early as possible, instead of doing it at the end like in the normal pipeline. The speedup can be significant, but be prepared to see artifacts and a general degradation of output quality.
-!EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
-!EXTPROGTARGET_1;raw
-!EXTPROGTARGET_2;queue-processed
-!FILEBROWSER_ADDDELTEMPLATE;Add/Del templates...
-!FILEBROWSER_APPLYPROFILE_PARTIAL;Apply - partial
-!FILEBROWSER_AUTODARKFRAME;Auto dark-frame
-!FILEBROWSER_AUTOFLATFIELD;Auto flat-field
-!FILEBROWSER_BROWSEPATHBUTTONHINT;Click to open specified path, reload folder and apply "find" keywords.
-!FILEBROWSER_BROWSEPATHHINT;Type a path to navigate to.\n\nKeyboard shortcuts:\nCtrl-o to focus to the path text box.\nEnter / Ctrl-Enter to browse there;\nEsc to clear changes.\nShift-Esc to remove focus.\n\nPath shortcuts:\n~ - user's home directory.\n! - user's pictures directory
-!FILEBROWSER_CACHE;Cache
-!FILEBROWSER_CACHECLEARFROMFULL;Clear all including cached profiles
-!FILEBROWSER_CACHECLEARFROMPARTIAL;Clear all except cached profiles
-!FILEBROWSER_COLORLABEL_TOOLTIP;Color label.\n\nUse dropdown menu or shortcuts:\nShift-Ctrl-0 No Color\nShift-Ctrl-1 Red\nShift-Ctrl-2 Yellow\nShift-Ctrl-3 Green\nShift-Ctrl-4 Blue\nShift-Ctrl-5 Purple
-!FILEBROWSER_CURRENT_NAME;Current name:
-!FILEBROWSER_DARKFRAME;Dark-frame
-!FILEBROWSER_DELETEDLGMSGINCLPROC;Are you sure you want to delete the selected %1 files including a queue-processed version?
-!FILEBROWSER_EXTPROGMENU;Open with
-!FILEBROWSER_FLATFIELD;Flat-Field
-!FILEBROWSER_MOVETODARKFDIR;Move to dark-frames directory
-!FILEBROWSER_MOVETOFLATFIELDDIR;Move to flat-fields directory
-!FILEBROWSER_NEW_NAME;New name:
-!FILEBROWSER_OPENDEFAULTVIEWER;Windows default viewer (queue-processed)
-!FILEBROWSER_POPUPCOLORLABEL;Color label
-!FILEBROWSER_POPUPCOLORLABEL0;Label: None
-!FILEBROWSER_POPUPCOLORLABEL1;Label: Red
-!FILEBROWSER_POPUPCOLORLABEL2;Label: Yellow
-!FILEBROWSER_POPUPCOLORLABEL3;Label: Green
-!FILEBROWSER_POPUPCOLORLABEL4;Label: Blue
-!FILEBROWSER_POPUPCOLORLABEL5;Label: Purple
-!FILEBROWSER_POPUPCOPYTO;Copy to...
-!FILEBROWSER_POPUPFILEOPERATIONS;File operations
-!FILEBROWSER_POPUPMOVETO;Move to...
-!FILEBROWSER_POPUPPROCESSFAST;Put to queue (Fast export)
-!FILEBROWSER_POPUPPROFILEOPERATIONS;Processing profile operations
-!FILEBROWSER_POPUPRANK;Rank
-!FILEBROWSER_POPUPRANK0;Unrank
-!FILEBROWSER_POPUPRANK1;Rank 1 *
-!FILEBROWSER_POPUPRANK2;Rank 2 **
-!FILEBROWSER_POPUPRANK3;Rank 3 ***
-!FILEBROWSER_POPUPRANK4;Rank 4 ****
-!FILEBROWSER_POPUPRANK5;Rank 5 *****
-!FILEBROWSER_POPUPREMOVEINCLPROC;Delete with output from queue
-!FILEBROWSER_QUERYBUTTONHINT;Clear the Find query
-!FILEBROWSER_QUERYHINT;Type filenames to search for. Supports partial filenames. Separate the search terms using commas, e.g.\n1001,1004,1199\n\nExclude search terms by prefixing them with !=\ne.g.\n!=1001,1004,1199\n\nShortcuts:\nCtrl-f - focus the Find box,\nEnter - search,\nEsc - clear the Find box,\nShift-Esc - defocus the Find box.
-!FILEBROWSER_QUERYLABEL; Find:
-!FILEBROWSER_RANK1_TOOLTIP;Rank 1 *\nShortcut: Shift-1
-!FILEBROWSER_RANK2_TOOLTIP;Rank 2 *\nShortcut: Shift-2
-!FILEBROWSER_RANK3_TOOLTIP;Rank 3 *\nShortcut: Shift-3
-!FILEBROWSER_RANK4_TOOLTIP;Rank 4 *\nShortcut: Shift-4
-!FILEBROWSER_RANK5_TOOLTIP;Rank 5 *\nShortcut: Shift-5
-!FILEBROWSER_RESETDEFAULTPROFILE;Reset to default
-!FILEBROWSER_SELECTDARKFRAME;Select dark-frame...
-!FILEBROWSER_SELECTFLATFIELD;Select flat-field...
-!FILEBROWSER_SHOWCOLORLABEL1HINT;Show images labeled Red.\nShortcut: Alt-1
-!FILEBROWSER_SHOWCOLORLABEL2HINT;Show images labeled Yellow.\nShortcut: Alt-2
-!FILEBROWSER_SHOWCOLORLABEL3HINT;Show images labeled Green.\nShortcut: Alt-3
-!FILEBROWSER_SHOWCOLORLABEL4HINT;Show images labeled Blue.\nShortcut: Alt-4
-!FILEBROWSER_SHOWCOLORLABEL5HINT;Show images labeled Purple.\nShortcut: Alt-5
-!FILEBROWSER_SHOWEDITEDHINT;Show edited images.\nShortcut: 7
-!FILEBROWSER_SHOWEDITEDNOTHINT;Show not edited images.\nShortcut: 6
-!FILEBROWSER_SHOWEXIFINFO;Show Exif info.\n\nShortcuts:\ni - Multiple Editor Tabs Mode,\nAlt-i - Single Editor Tab Mode.
-!FILEBROWSER_SHOWNOTTRASHHINT;Show only non-deleted images.
-!FILEBROWSER_SHOWORIGINALHINT;Show only original images.\n\nWhen several images exist with the same filename but different extensions, the one considered original is the one whose extension is nearest the top of the parsed extensions list in Preferences > File Browser > Parsed Extensions.
-!FILEBROWSER_SHOWRECENTLYSAVEDHINT;Show saved images.\nShortcut: Alt-7
-!FILEBROWSER_SHOWRECENTLYSAVEDNOTHINT;Show unsaved images.\nShortcut: Alt-6
-!FILEBROWSER_SHOWUNCOLORHINT;Show images without a color label.\nShortcut: Alt-0
-!FILEBROWSER_UNRANK_TOOLTIP;Unrank.\nShortcut: Shift-0
-!FILECHOOSER_FILTER_ANY;All files
-!FILECHOOSER_FILTER_COLPROF;Color profiles (*.icc)
-!FILECHOOSER_FILTER_CURVE;Curve files
-!FILECHOOSER_FILTER_LCP;Lens correction profiles
-!FILECHOOSER_FILTER_PP;Processing profiles
-!FILECHOOSER_FILTER_SAME;Same format as current photo
-!FILECHOOSER_FILTER_TIFF;TIFF files
-!GENERAL_AFTER;After
-!GENERAL_APPLY;Apply
-!GENERAL_ASIMAGE;As Image
-!GENERAL_AUTO;Automatic
-!GENERAL_BEFORE;Before
-!GENERAL_CLOSE;Close
-!GENERAL_CURRENT;Current
-!GENERAL_FILE;File
-!GENERAL_NONE;None
-!GENERAL_OPEN;Open
-!GENERAL_RESET;Reset
-!GENERAL_SAVE_AS;Save as...
-!GENERAL_SLIDER;Slider
-!GENERAL_UNCHANGED;(Unchanged)
-!GENERAL_WARNING;Warning
-!GIMP_PLUGIN_INFO;Welcome to the RawTherapee GIMP plugin!\nOnce you are done editing, simply close the main RawTherapee window and the image will be automatically imported in GIMP.
-!HISTOGRAM_TOOLTIP_BAR;Show/Hide RGB indicator bar.
-!HISTOGRAM_TOOLTIP_CHRO;Show/Hide chromaticity histogram.
-!HISTOGRAM_TOOLTIP_MODE;Toggle between linear, log-linear and log-log scaling of the histogram.
-!HISTOGRAM_TOOLTIP_RAW;Show/Hide raw histogram.
-!HISTORY_MSG_82;Profile changed
-!HISTORY_MSG_83;S/H - Sharp mask
-!HISTORY_MSG_84;Perspective correction
-!HISTORY_MSG_85;Lens Correction - LCP file
-!HISTORY_MSG_86;RGB Curves - Luminosity mode
-!HISTORY_MSG_87;Impulse Noise Reduction
-!HISTORY_MSG_88;Impulse NR threshold
-!HISTORY_MSG_89;Noise Reduction
-!HISTORY_MSG_90;NR - Luminance
-!HISTORY_MSG_91;NR - Chrominance master
-!HISTORY_MSG_92;NR - Gamma
-!HISTORY_MSG_93;CbDL - Value
-!HISTORY_MSG_94;Contrast by Detail Levels
-!HISTORY_MSG_95;L*a*b* - Chromaticity
-!HISTORY_MSG_96;L*a*b* - a* curve
-!HISTORY_MSG_97;L*a*b* - b* curve
-!HISTORY_MSG_98;Demosaicing method
-!HISTORY_MSG_99;Hot pixel filter
-!HISTORY_MSG_100;Exposure - Saturation
-!HISTORY_MSG_101;HSV - Hue
-!HISTORY_MSG_102;HSV - Saturation
-!HISTORY_MSG_103;HSV - Value
-!HISTORY_MSG_104;HSV Equalizer
-!HISTORY_MSG_105;Defringe
-!HISTORY_MSG_106;Defringe - Radius
-!HISTORY_MSG_107;Defringe - Threshold
-!HISTORY_MSG_108;Exposure - HLC threshold
-!HISTORY_MSG_109;Resize - Bounding box
-!HISTORY_MSG_110;Resize - Applies to
-!HISTORY_MSG_111;L*a*b* - Avoid color shift
-!HISTORY_MSG_112;--unused--
-!HISTORY_MSG_113;L*a*b* - Red/skin prot.
-!HISTORY_MSG_114;DCB iterations
-!HISTORY_MSG_115;False color suppression
-!HISTORY_MSG_116;DCB enhancement
-!HISTORY_MSG_117;Raw CA correction - Red
-!HISTORY_MSG_118;Raw CA correction - Blue
-!HISTORY_MSG_119;Line noise filter
-!HISTORY_MSG_120;Green equilibration
-!HISTORY_MSG_121;Raw CA Correction - Auto
-!HISTORY_MSG_122;Dark-Frame - Auto-selection
-!HISTORY_MSG_123;Dark-Frame - File
-!HISTORY_MSG_124;White point correction
-!HISTORY_MSG_126;Flat-Field - File
-!HISTORY_MSG_127;Flat-Field - Auto-selection
-!HISTORY_MSG_128;Flat-Field - Blur radius
-!HISTORY_MSG_129;Flat-Field - Blur type
-!HISTORY_MSG_130;Auto distortion correction
-!HISTORY_MSG_131;NR - Luma
-!HISTORY_MSG_132;NR - Chroma
-!HISTORY_MSG_133;Output gamma
-!HISTORY_MSG_134;Free gamma
-!HISTORY_MSG_135;Free gamma
-!HISTORY_MSG_136;Free gamma slope
-!HISTORY_MSG_137;Black level - Green 1
-!HISTORY_MSG_138;Black level - Red
-!HISTORY_MSG_139;Black level - Blue
-!HISTORY_MSG_140;Black level - Green 2
-!HISTORY_MSG_141;Black level - Link greens
-!HISTORY_MSG_142;ES - Iterations
-!HISTORY_MSG_143;ES - Quantity
-!HISTORY_MSG_144;Microcontrast - Quantity
-!HISTORY_MSG_145;Microcontrast - Uniformity
-!HISTORY_MSG_146;Edge sharpening
-!HISTORY_MSG_147;ES - Luminance only
-!HISTORY_MSG_148;Microcontrast
-!HISTORY_MSG_149;Microcontrast - 3×3 matrix
-!HISTORY_MSG_150;Post-demosaic artifact/noise red.
-!HISTORY_MSG_151;Vibrance
-!HISTORY_MSG_152;Vib - Pastel tones
-!HISTORY_MSG_153;Vib - Saturated tones
-!HISTORY_MSG_154;Vib - Protect skin-tones
-!HISTORY_MSG_155;Vib - Avoid color shift
-!HISTORY_MSG_156;Vib - Link pastel/saturated
-!HISTORY_MSG_157;Vib - P/S threshold
-!HISTORY_MSG_158;TM - Strength
-!HISTORY_MSG_159;TM - Edge stopping
-!HISTORY_MSG_160;TM - Scale
-!HISTORY_MSG_161;TM - Reweighting iterates
-!HISTORY_MSG_162;Tone Mapping
-!HISTORY_MSG_163;RGB Curves - Red
-!HISTORY_MSG_164;RGB Curves - Green
-!HISTORY_MSG_165;RGB Curves - Blue
-!HISTORY_MSG_166;Exposure - Reset
-!HISTORY_MSG_167;Demosaicing method
-!HISTORY_MSG_168;L*a*b* - CC curve
-!HISTORY_MSG_169;L*a*b* - CH curve
-!HISTORY_MSG_170;Vibrance - HH curve
-!HISTORY_MSG_171;L*a*b* - LC curve
-!HISTORY_MSG_172;L*a*b* - Restrict LC
-!HISTORY_MSG_173;NR - Detail recovery
-!HISTORY_MSG_174;CIECAM02
-!HISTORY_MSG_175;CAM02 - CAT02 adaptation
-!HISTORY_MSG_176;CAM02 - Viewing surround
-!HISTORY_MSG_177;CAM02 - Scene luminosity
-!HISTORY_MSG_178;CAM02 - Viewing luminosity
-!HISTORY_MSG_179;CAM02 - White-point model
-!HISTORY_MSG_180;CAM02 - Lightness (J)
-!HISTORY_MSG_181;CAM02 - Chroma (C)
-!HISTORY_MSG_182;CAM02 - Automatic CAT02
-!HISTORY_MSG_183;CAM02 - Contrast (J)
-!HISTORY_MSG_184;CAM02 - Scene surround
-!HISTORY_MSG_185;CAM02 - Gamut control
-!HISTORY_MSG_186;CAM02 - Algorithm
-!HISTORY_MSG_187;CAM02 - Red/skin prot.
-!HISTORY_MSG_188;CAM02 - Brightness (Q)
-!HISTORY_MSG_189;CAM02 - Contrast (Q)
-!HISTORY_MSG_190;CAM02 - Saturation (S)
-!HISTORY_MSG_191;CAM02 - Colorfulness (M)
-!HISTORY_MSG_192;CAM02 - Hue (h)
-!HISTORY_MSG_193;CAM02 - Tone curve 1
-!HISTORY_MSG_194;CAM02 - Tone curve 2
-!HISTORY_MSG_195;CAM02 - Tone curve 1
-!HISTORY_MSG_196;CAM02 - Tone curve 2
-!HISTORY_MSG_197;CAM02 - Color curve
-!HISTORY_MSG_198;CAM02 - Color curve
-!HISTORY_MSG_199;CAM02 - Output histograms
-!HISTORY_MSG_200;CAM02 - Tone mapping
-!HISTORY_MSG_201;NR - Chrominance - R&G
-!HISTORY_MSG_202;NR - Chrominance - B&Y
-!HISTORY_MSG_203;NR - Color space
-!HISTORY_MSG_204;LMMSE enhancement steps
-!HISTORY_MSG_205;CAM02 - Hot/bad pixel filter
-!HISTORY_MSG_206;CAT02 - Auto scene luminosity
-!HISTORY_MSG_207;Defringe - Hue curve
-!HISTORY_MSG_208;WB - B/R equalizer
-!HISTORY_MSG_210;GF - Angle
-!HISTORY_MSG_211;Graduated Filter
-!HISTORY_MSG_212;VF - Strength
-!HISTORY_MSG_213;Vignette Filter
-!HISTORY_MSG_214;Black-and-White
-!HISTORY_MSG_215;B&W - CM - Red
-!HISTORY_MSG_216;B&W - CM - Green
-!HISTORY_MSG_217;B&W - CM - Blue
-!HISTORY_MSG_218;B&W - Gamma - Red
-!HISTORY_MSG_219;B&W - Gamma - Green
-!HISTORY_MSG_220;B&W - Gamma - Blue
-!HISTORY_MSG_221;B&W - Color filter
-!HISTORY_MSG_222;B&W - Presets
-!HISTORY_MSG_223;B&W - CM - Orange
-!HISTORY_MSG_224;B&W - CM - Yellow
-!HISTORY_MSG_225;B&W - CM - Cyan
-!HISTORY_MSG_226;B&W - CM - Magenta
-!HISTORY_MSG_227;B&W - CM - Purple
-!HISTORY_MSG_228;B&W - Luminance equalizer
-!HISTORY_MSG_229;B&W - Luminance equalizer
-!HISTORY_MSG_230;B&W - Mode
-!HISTORY_MSG_231;B&W - 'Before' curve
-!HISTORY_MSG_232;B&W - 'Before' curve type
-!HISTORY_MSG_233;B&W - 'After' curve
-!HISTORY_MSG_234;B&W - 'After' curve type
-!HISTORY_MSG_235;B&W - CM - Auto
-!HISTORY_MSG_236;--unused--
-!HISTORY_MSG_237;B&W - CM
-!HISTORY_MSG_238;GF - Feather
-!HISTORY_MSG_239;GF - Strength
-!HISTORY_MSG_240;GF - Center
-!HISTORY_MSG_241;VF - Feather
-!HISTORY_MSG_242;VF - Roundness
-!HISTORY_MSG_243;VC - Radius
-!HISTORY_MSG_244;VC - Strength
-!HISTORY_MSG_245;VC - Center
-!HISTORY_MSG_246;L*a*b* - CL curve
-!HISTORY_MSG_247;L*a*b* - LH curve
-!HISTORY_MSG_248;L*a*b* - HH curve
-!HISTORY_MSG_249;CbDL - Threshold
-!HISTORY_MSG_250;NR - Enhanced
-!HISTORY_MSG_251;B&W - Algorithm
-!HISTORY_MSG_252;CbDL - Skin tar/prot
-!HISTORY_MSG_253;CbDL - Reduce artifacts
-!HISTORY_MSG_254;CbDL - Skin hue
-!HISTORY_MSG_255;NR - Median filter
-!HISTORY_MSG_256;NR - Median - Type
-!HISTORY_MSG_257;Color Toning
-!HISTORY_MSG_258;CT - Color curve
-!HISTORY_MSG_259;CT - Opacity curve
-!HISTORY_MSG_260;CT - a*[b*] opacity
-!HISTORY_MSG_261;CT - Method
-!HISTORY_MSG_262;CT - b* opacity
-!HISTORY_MSG_263;CT - Shadows - Red
-!HISTORY_MSG_264;CT - Shadows - Green
-!HISTORY_MSG_265;CT - Shadows - Blue
-!HISTORY_MSG_266;CT - Mid - Red
-!HISTORY_MSG_267;CT - Mid - Green
-!HISTORY_MSG_268;CT - Mid - Blue
-!HISTORY_MSG_269;CT - High - Red
-!HISTORY_MSG_270;CT - High - Green
-!HISTORY_MSG_271;CT - High - Blue
-!HISTORY_MSG_272;CT - Balance
-!HISTORY_MSG_273;CT - Color Balance SMH
-!HISTORY_MSG_274;CT - Sat. Shadows
-!HISTORY_MSG_275;CT - Sat. Highlights
-!HISTORY_MSG_276;CT - Opacity
-!HISTORY_MSG_277;--unused--
-!HISTORY_MSG_278;CT - Preserve luminance
-!HISTORY_MSG_279;CT - Shadows
-!HISTORY_MSG_280;CT - Highlights
-!HISTORY_MSG_281;CT - Sat. strength
-!HISTORY_MSG_282;CT - Sat. threshold
-!HISTORY_MSG_283;CT - Strength
-!HISTORY_MSG_284;CT - Auto sat. protection
-!HISTORY_MSG_285;NR - Median - Method
-!HISTORY_MSG_286;NR - Median - Type
-!HISTORY_MSG_287;NR - Median - Iterations
-!HISTORY_MSG_288;Flat-Field - Clip control
-!HISTORY_MSG_289;Flat-Field - Clip control - Auto
-!HISTORY_MSG_290;Black Level - Red
-!HISTORY_MSG_291;Black Level - Green
-!HISTORY_MSG_292;Black Level - Blue
-!HISTORY_MSG_293;Film Simulation
-!HISTORY_MSG_294;Film Simulation - Strength
-!HISTORY_MSG_295;Film Simulation - Film
-!HISTORY_MSG_296;NR - Luminance curve
-!HISTORY_MSG_297;NR - Mode
-!HISTORY_MSG_298;Dead pixel filter
-!HISTORY_MSG_299;NR - Chrominance curve
-!HISTORY_MSG_300;-
-!HISTORY_MSG_301;NR - Luma control
-!HISTORY_MSG_302;NR - Chroma method
-!HISTORY_MSG_303;NR - Chroma method
-!HISTORY_MSG_304;W - Contrast levels
-!HISTORY_MSG_305;Wavelet Levels
-!HISTORY_MSG_306;W - Process
-!HISTORY_MSG_307;W - Process
-!HISTORY_MSG_308;W - Process direction
-!HISTORY_MSG_309;W - ES - Detail
-!HISTORY_MSG_310;W - Residual - Sky tar/prot
-!HISTORY_MSG_311;W - Wavelet levels
-!HISTORY_MSG_312;W - Residual - Shadows threshold
-!HISTORY_MSG_313;W - Chroma - Sat/past
-!HISTORY_MSG_314;W - Gamut - Reduce artifacts
-!HISTORY_MSG_315;W - Residual - Contrast
-!HISTORY_MSG_316;W - Gamut - Skin tar/prot
-!HISTORY_MSG_317;W - Gamut - Skin hue
-!HISTORY_MSG_318;W - Contrast - Highlight levels
-!HISTORY_MSG_319;W - Contrast - Highlight range
-!HISTORY_MSG_320;W - Contrast - Shadow range
-!HISTORY_MSG_321;W - Contrast - Shadow levels
-!HISTORY_MSG_322;W - Gamut - Avoid color shift
-!HISTORY_MSG_323;W - ES - Local contrast
-!HISTORY_MSG_324;W - Chroma - Pastel
-!HISTORY_MSG_325;W - Chroma - Saturated
-!HISTORY_MSG_326;W - Chroma - Method
-!HISTORY_MSG_327;W - Contrast - Apply to
-!HISTORY_MSG_328;W - Chroma - Link strength
-!HISTORY_MSG_329;W - Toning - Opacity RG
-!HISTORY_MSG_330;W - Toning - Opacity BY
-!HISTORY_MSG_331;W - Contrast levels - Extra
-!HISTORY_MSG_332;W - Tiling method
-!HISTORY_MSG_333;W - Residual - Shadows
-!HISTORY_MSG_334;W - Residual - Chroma
-!HISTORY_MSG_335;W - Residual - Highlights
-!HISTORY_MSG_336;W - Residual - Highlights threshold
-!HISTORY_MSG_337;W - Residual - Sky hue
-!HISTORY_MSG_338;W - ES - Radius
-!HISTORY_MSG_339;W - ES - Strength
-!HISTORY_MSG_340;W - Strength
-!HISTORY_MSG_341;W - Edge performance
-!HISTORY_MSG_342;W - ES - First level
-!HISTORY_MSG_343;W - Chroma levels
-!HISTORY_MSG_344;W - Meth chroma sl/cur
-!HISTORY_MSG_345;W - ES - Local contrast
-!HISTORY_MSG_346;W - ES - Local contrast method
-!HISTORY_MSG_347;W - Denoise - Level 1
-!HISTORY_MSG_348;W - Denoise - Level 2
-!HISTORY_MSG_349;W - Denoise - Level 3
-!HISTORY_MSG_350;W - ES - Edge detection
-!HISTORY_MSG_351;W - Residual - HH curve
-!HISTORY_MSG_352;W - Background
-!HISTORY_MSG_353;W - ES - Gradient sensitivity
-!HISTORY_MSG_354;W - ES - Enhanced
-!HISTORY_MSG_355;W - ES - Threshold low
-!HISTORY_MSG_356;W - ES - Threshold high
-!HISTORY_MSG_357;W - Denoise - Link with ES
-!HISTORY_MSG_358;W - Gamut - CH
-!HISTORY_MSG_359;Hot/Dead - Threshold
-!HISTORY_MSG_360;TM - Gamma
-!HISTORY_MSG_361;W - Final - Chroma balance
-!HISTORY_MSG_362;W - Residual - Compression method
-!HISTORY_MSG_363;W - Residual - Compression strength
-!HISTORY_MSG_364;W - Final - Contrast balance
-!HISTORY_MSG_365;W - Final - Delta balance
-!HISTORY_MSG_366;W - Residual - Compression gamma
-!HISTORY_MSG_367;W - Final - 'After' contrast curve
-!HISTORY_MSG_368;W - Final - Contrast balance
-!HISTORY_MSG_369;W - Final - Balance method
-!HISTORY_MSG_370;W - Final - Local contrast curve
-!HISTORY_MSG_371;Post-Resize Sharpening
-!HISTORY_MSG_372;PRS USM - Radius
-!HISTORY_MSG_373;PRS USM - Amount
-!HISTORY_MSG_374;PRS USM - Threshold
-!HISTORY_MSG_375;PRS USM - Sharpen only edges
-!HISTORY_MSG_376;PRS USM - Edge detection radius
-!HISTORY_MSG_377;PRS USM - Edge tolerance
-!HISTORY_MSG_378;PRS USM - Halo control
-!HISTORY_MSG_379;PRS USM - Halo control amount
-!HISTORY_MSG_380;PRS - Method
-!HISTORY_MSG_381;PRS RLD - Radius
-!HISTORY_MSG_382;PRS RLD - Amount
-!HISTORY_MSG_383;PRS RLD - Damping
-!HISTORY_MSG_384;PRS RLD - Iterations
-!HISTORY_MSG_385;W - Residual - Color Balance
-!HISTORY_MSG_386;W - Residual - CB green high
-!HISTORY_MSG_387;W - Residual - CB blue high
-!HISTORY_MSG_388;W - Residual - CB green mid
-!HISTORY_MSG_389;W - Residual - CB blue mid
-!HISTORY_MSG_390;W - Residual - CB green low
-!HISTORY_MSG_391;W - Residual - CB blue low
-!HISTORY_MSG_392;W - Residual - Color Balance
-!HISTORY_MSG_393;DCP - Look table
-!HISTORY_MSG_394;DCP - Baseline exposure
-!HISTORY_MSG_395;DCP - Base table
-!HISTORY_MSG_396;W - Contrast sub-tool
-!HISTORY_MSG_397;W - Chroma sub-tool
-!HISTORY_MSG_398;W - ES sub-tool
-!HISTORY_MSG_399;W - Residual sub-tool
-!HISTORY_MSG_400;W - Final sub-tool
-!HISTORY_MSG_401;W - Toning sub-tool
-!HISTORY_MSG_402;W - Denoise sub-tool
-!HISTORY_MSG_403;W - ES - Edge sensitivity
-!HISTORY_MSG_404;W - ES - Base amplification
-!HISTORY_MSG_405;W - Denoise - Level 4
-!HISTORY_MSG_406;W - ES - Neighboring pixels
-!HISTORY_MSG_407;Retinex - Method
-!HISTORY_MSG_408;Retinex - Radius
-!HISTORY_MSG_409;Retinex - Contrast
-!HISTORY_MSG_410;Retinex - Offset
-!HISTORY_MSG_411;Retinex - Strength
-!HISTORY_MSG_412;Retinex - Gaussian gradient
-!HISTORY_MSG_413;Retinex - Contrast
-!HISTORY_MSG_414;Retinex - Histogram - Lab
-!HISTORY_MSG_415;Retinex - Transmission
-!HISTORY_MSG_416;Retinex
-!HISTORY_MSG_417;Retinex - Transmission median
-!HISTORY_MSG_418;Retinex - Threshold
-!HISTORY_MSG_419;Retinex - Color space
-!HISTORY_MSG_420;Retinex - Histogram - HSL
-!HISTORY_MSG_421;Retinex - Gamma
-!HISTORY_MSG_422;Retinex - Gamma
-!HISTORY_MSG_423;Retinex - Gamma slope
-!HISTORY_MSG_424;Retinex - HL threshold
-!HISTORY_MSG_425;Retinex - Log base
-!HISTORY_MSG_426;Retinex - Hue equalizer
-!HISTORY_MSG_427;Output rendering intent
-!HISTORY_MSG_428;Monitor rendering intent
-!HISTORY_MSG_429;Retinex - Iterations
-!HISTORY_MSG_430;Retinex - Transmission gradient
-!HISTORY_MSG_431;Retinex - Strength gradient
-!HISTORY_MSG_432;Retinex - M - Highlights
-!HISTORY_MSG_433;Retinex - M - Highlights TW
-!HISTORY_MSG_434;Retinex - M - Shadows
-!HISTORY_MSG_435;Retinex - M - Shadows TW
-!HISTORY_MSG_436;Retinex - M - Radius
-!HISTORY_MSG_437;Retinex - M - Method
-!HISTORY_MSG_438;Retinex - M - Equalizer
-!HISTORY_MSG_439;Retinex - Process
-!HISTORY_MSG_440;CbDL - Method
-!HISTORY_MSG_441;Retinex - Gain transmission
-!HISTORY_MSG_442;Retinex - Scale
-!HISTORY_MSG_443;Output black point compensation
-!HISTORY_MSG_444;WB - Temp bias
-!HISTORY_MSG_445;Raw sub-image
-!HISTORY_MSG_449;PS - ISO adaption
-!HISTORY_MSG_452;PS - Show motion
-!HISTORY_MSG_453;PS - Show mask only
-!HISTORY_MSG_457;PS - Check red/blue
-!HISTORY_MSG_462;PS - Check green
-!HISTORY_MSG_464;PS - Blur motion mask
-!HISTORY_MSG_465;PS - Blur radius
-!HISTORY_MSG_468;PS - Fill holes
-!HISTORY_MSG_469;PS - Median
-!HISTORY_MSG_471;PS - Motion correction
-!HISTORY_MSG_472;PS - Smooth transitions
-!HISTORY_MSG_473;PS - Use LMMSE
-!HISTORY_MSG_474;PS - Equalize
-!HISTORY_MSG_475;PS - Equalize channel
-!HISTORY_MSG_476;CAM02 - Temp out
-!HISTORY_MSG_477;CAM02 - Green out
-!HISTORY_MSG_478;CAM02 - Yb out
-!HISTORY_MSG_479;CAM02 - CAT02 adaptation out
-!HISTORY_MSG_480;CAM02 - Automatic CAT02 out
-!HISTORY_MSG_481;CAM02 - Temp scene
-!HISTORY_MSG_482;CAM02 - Green scene
-!HISTORY_MSG_483;CAM02 - Yb scene
-!HISTORY_MSG_484;CAM02 - Auto Yb scene
-!HISTORY_MSG_485;Lens Correction
-!HISTORY_MSG_486;Lens Correction - Camera
-!HISTORY_MSG_487;Lens Correction - Lens
-!HISTORY_MSG_488;Dynamic Range Compression
-!HISTORY_MSG_489;DRC - Detail
-!HISTORY_MSG_490;DRC - Amount
-!HISTORY_MSG_491;White Balance
-!HISTORY_MSG_492;RGB Curves
-!HISTORY_MSG_493;L*a*b* Adjustments
-!HISTORY_MSG_CLAMPOOG;Clip out-of-gamut colors
-!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_AB;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_CHANNEL;CT - Channel
-!HISTORY_MSG_COLORTONING_LABREGION_CHROMATICITYMASK;CT - region C mask
-!HISTORY_MSG_COLORTONING_LABREGION_HUEMASK;CT - H mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESS;CT - Lightness
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESSMASK;CT - L mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIST;CT - List
-!HISTORY_MSG_COLORTONING_LABREGION_MASKBLUR;CT - region mask blur
-!HISTORY_MSG_COLORTONING_LABREGION_OFFSET;CT - region offset
-!HISTORY_MSG_COLORTONING_LABREGION_POWER;CT - region power
-!HISTORY_MSG_COLORTONING_LABREGION_SATURATION;CT - Saturation
-!HISTORY_MSG_COLORTONING_LABREGION_SHOWMASK;CT - region show mask
-!HISTORY_MSG_COLORTONING_LABREGION_SLOPE;CT - region slope
-!HISTORY_MSG_DEHAZE_DEPTH;Dehaze - Depth
-!HISTORY_MSG_DEHAZE_ENABLED;Haze Removal
-!HISTORY_MSG_DEHAZE_SHOW_DEPTH_MAP;Dehaze - Show depth map
-!HISTORY_MSG_DEHAZE_STRENGTH;Dehaze - Strength
-!HISTORY_MSG_DUALDEMOSAIC_AUTO_CONTRAST;Dual demosaic - Auto threshold
-!HISTORY_MSG_DUALDEMOSAIC_CONTRAST;Dual demosaic - Contrast threshold
-!HISTORY_MSG_HISTMATCHING;Auto-matched tone curve
-!HISTORY_MSG_ICM_OUTPUT_PRIMARIES;Output - Primaries
-!HISTORY_MSG_ICM_OUTPUT_TEMP;Output - ICC-v4 illuminant D
-!HISTORY_MSG_ICM_OUTPUT_TYPE;Output - Type
-!HISTORY_MSG_ICM_WORKING_GAMMA;Working - Gamma
-!HISTORY_MSG_ICM_WORKING_SLOPE;Working - Slope
-!HISTORY_MSG_ICM_WORKING_TRC_METHOD;Working - TRC method
-!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
-!HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness
-!HISTORY_MSG_LOCALCONTRAST_ENABLED;Local Contrast
-!HISTORY_MSG_LOCALCONTRAST_LIGHTNESS;Local Contrast - Lightness
-!HISTORY_MSG_LOCALCONTRAST_RADIUS;Local Contrast - Radius
-!HISTORY_MSG_METADATA_MODE;Metadata copy mode
-!HISTORY_MSG_MICROCONTRAST_CONTRAST;Microcontrast - Contrast threshold
-!HISTORY_MSG_PIXELSHIFT_DEMOSAIC;PS - Demosaic method for motion
-!HISTORY_MSG_PREPROCESS_LINEDENOISE_DIRECTION;Line noise filter direction
-!HISTORY_MSG_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!HISTORY_MSG_PRSHARPEN_CONTRAST;PRS - Contrast threshold
-!HISTORY_MSG_RAWCACORR_AUTOIT;Raw CA Correction - Iterations
-!HISTORY_MSG_RAWCACORR_COLORSHIFT;Raw CA Correction - Avoid color shift
-!HISTORY_MSG_RAW_BORDER;Raw border
-!HISTORY_MSG_RESIZE_ALLOWUPSCALING;Resize - Allow upscaling
-!HISTORY_MSG_SHARPENING_BLUR;Sharpening - Blur radius
-!HISTORY_MSG_SHARPENING_CONTRAST;Sharpening - Contrast threshold
-!HISTORY_MSG_SH_COLORSPACE;S/H - Colorspace
-!HISTORY_MSG_SOFTLIGHT_ENABLED;Soft light
-!HISTORY_MSG_SOFTLIGHT_STRENGTH;Soft light - Strength
-!HISTORY_MSG_TM_FATTAL_ANCHOR;DRC - Anchor
-!HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s
-!ICCPROFCREATOR_COPYRIGHT;Copyright:
-!ICCPROFCREATOR_COPYRIGHT_RESET_TOOLTIP;Reset to the default copyright, granted to "RawTherapee, CC0"
-!ICCPROFCREATOR_CUSTOM;Custom
-!ICCPROFCREATOR_DESCRIPTION;Description:
-!ICCPROFCREATOR_DESCRIPTION_ADDPARAM;Append gamma and slope values to the description
-!ICCPROFCREATOR_DESCRIPTION_TOOLTIP;Leave empty to set the default description.
-!ICCPROFCREATOR_GAMMA;Gamma
-!ICCPROFCREATOR_ICCVERSION;ICC version:
-!ICCPROFCREATOR_ILL;Illuminant:
-!ICCPROFCREATOR_ILL_41;D41
-!ICCPROFCREATOR_ILL_50;D50
-!ICCPROFCREATOR_ILL_55;D55
-!ICCPROFCREATOR_ILL_60;D60
-!ICCPROFCREATOR_ILL_65;D65
-!ICCPROFCREATOR_ILL_80;D80
-!ICCPROFCREATOR_ILL_DEF;Default
-!ICCPROFCREATOR_ILL_INC;StdA 2856K
-!ICCPROFCREATOR_ILL_TOOLTIP;You can only set the illuminant for ICC v4 profiles.
-!ICCPROFCREATOR_PRIMARIES;Primaries:
-!ICCPROFCREATOR_PRIM_ACESP0;ACES AP0
-!ICCPROFCREATOR_PRIM_ACESP1;ACES AP1
-!ICCPROFCREATOR_PRIM_ADOBE;Adobe RGB (1998)
-!ICCPROFCREATOR_PRIM_BEST;BestRGB
-!ICCPROFCREATOR_PRIM_BETA;BetaRGB
-!ICCPROFCREATOR_PRIM_BLUX;Blue X
-!ICCPROFCREATOR_PRIM_BLUY;Blue Y
-!ICCPROFCREATOR_PRIM_BRUCE;BruceRGB
-!ICCPROFCREATOR_PRIM_GREX;Green X
-!ICCPROFCREATOR_PRIM_GREY;Green Y
-!ICCPROFCREATOR_PRIM_PROPH;Prophoto
-!ICCPROFCREATOR_PRIM_REC2020;Rec2020
-!ICCPROFCREATOR_PRIM_REDX;Red X
-!ICCPROFCREATOR_PRIM_REDY;Red Y
-!ICCPROFCREATOR_PRIM_SRGB;sRGB
-!ICCPROFCREATOR_PRIM_TOOLTIP;You can only set custom primaries for ICC v4 profiles.
-!ICCPROFCREATOR_PRIM_WIDEG;Widegamut
-!ICCPROFCREATOR_PROF_V2;ICC v2
-!ICCPROFCREATOR_PROF_V4;ICC v4
-!ICCPROFCREATOR_SAVEDIALOG_TITLE;Save ICC profile as...
-!ICCPROFCREATOR_SLOPE;Slope
-!ICCPROFCREATOR_TRC_PRESET;Tone response curve:
-!IPTCPANEL_CATEGORYHINT;Identifies the subject of the image in the opinion of the provider.
-!IPTCPANEL_CITYHINT;Enter the name of the city pictured in this image.
-!IPTCPANEL_COPYRIGHT;Copyright notice
-!IPTCPANEL_COPYRIGHTHINT;Enter a Notice on the current owner of the Copyright for this image, such as ©2008 Jane Doe.
-!IPTCPANEL_COUNTRYHINT;Enter the name of the country pictured in this image.
-!IPTCPANEL_CREATOR;Creator
-!IPTCPANEL_CREATORHINT;Enter the name of the person that created this image.
-!IPTCPANEL_CREATORJOBTITLE;Creator's job title
-!IPTCPANEL_CREATORJOBTITLEHINT;Enter the Job Title of the person listed in the Creator field.
-!IPTCPANEL_DATECREATEDHINT;Enter the Date the image was taken.
-!IPTCPANEL_DESCRIPTION;Description
-!IPTCPANEL_DESCRIPTIONHINT;Enter a "caption" describing the who, what, and why of what is happening in this image, this might include names of people, and/or their role in the action that is taking place within the image.
-!IPTCPANEL_DESCRIPTIONWRITER;Description writer
-!IPTCPANEL_DESCRIPTIONWRITERHINT;Enter the name of the person involved in writing, editing or correcting the description of the image.
-!IPTCPANEL_HEADLINEHINT;Enter a brief publishable synopsis or summary of the contents of the image.
-!IPTCPANEL_INSTRUCTIONSHINT;Enter information about embargoes, or other restrictions not covered by the Copyright field.
-!IPTCPANEL_KEYWORDSHINT;Enter any number of keywords, terms or phrases used to express the subject matter in the image.
-!IPTCPANEL_PROVINCE;Province or state
-!IPTCPANEL_PROVINCEHINT;Enter the name of the province or state pictured in this image.
-!IPTCPANEL_SOURCEHINT;Enter or edit the name of a person or party who has a role in the content supply chain, such as a person or entity from whom you received this image from.
-!IPTCPANEL_SUPPCATEGORIES;Supplemental categories
-!IPTCPANEL_SUPPCATEGORIESHINT;Further refines the subject of the image.
-!IPTCPANEL_TITLEHINT;Enter a short verbal and human readable name for the image, this may be the file name.
-!IPTCPANEL_TRANSREFERENCE;Job ID
-!IPTCPANEL_TRANSREFERENCEHINT;Enter a number or identifier needed for workflow control or tracking.
-!MAIN_BUTTON_FULLSCREEN;Fullscreen
-!MAIN_BUTTON_ICCPROFCREATOR;ICC Profile Creator
-!MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4
-!MAIN_BUTTON_NAVPREV_TOOLTIP;Navigate to the previous image relative to image opened in the Editor.\nShortcut: Shift-F3\n\nTo navigate to the previous image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F3
-!MAIN_BUTTON_NAVSYNC_TOOLTIP;Synchronize the File Browser or Filmstrip with the Editor to reveal the thumbnail of the currently opened image, and clear any active filters.\nShortcut: x\n\nAs above, but without clearing active filters:\nShortcut: y\n(Note that the thumbnail of the opened image will not be shown if filtered out).
-!MAIN_BUTTON_PUTTOQUEUE_TOOLTIP;Put current image to processing queue.\nShortcut: Ctrl+b
-!MAIN_BUTTON_SAVE_TOOLTIP;Save current image.\nShortcut: Ctrl+s\nSave current profile (.pp3).\nShortcut: Ctrl+Shift+s
-!MAIN_BUTTON_SENDTOEDITOR_TOOLTIP;Edit current image in external editor.\nShortcut: Ctrl+e
-!MAIN_BUTTON_SHOWHIDESIDEPANELS_TOOLTIP;Show/hide all side panels.\nShortcut: m
-!MAIN_BUTTON_UNFULLSCREEN;Exit fullscreen
-!MAIN_FRAME_BATCHQUEUE_TOOLTIP;Processing queue.\nShortcut: Ctrl-F3
-!MAIN_FRAME_EDITOR;Editor
-!MAIN_FRAME_EDITOR_TOOLTIP;Editor.\nShortcut: Ctrl-F4
-!MAIN_FRAME_FILEBROWSER_TOOLTIP;File browser.\nShortcut: Ctrl-F2
-!MAIN_FRAME_PLACES_DEL;Remove
-!MAIN_MSG_EMPTYFILENAME;Filename unspecified!
-!MAIN_MSG_IMAGEUNPROCESSED;This command requires all selected images to be queue-processed first.
-!MAIN_MSG_NAVIGATOR;Navigator
-!MAIN_MSG_OPERATIONCANCELLED;Operation cancelled
-!MAIN_MSG_PATHDOESNTEXIST;The path\n\n%1\n\ndoes not exist. Please set a correct path in Preferences.
-!MAIN_MSG_SETPATHFIRST;You first have to set a target path in Preferences in order to use this function!
-!MAIN_MSG_TOOMANYOPENEDITORS;Too many open editors.\nPlease close an editor to continue.
-!MAIN_MSG_WRITEFAILED;Failed to write\n"%1"\n\nMake sure that the folder exists and that you have write permission to it.
-!MAIN_TAB_ADVANCED;Advanced
-!MAIN_TAB_ADVANCED_TOOLTIP;Shortcut: Alt-w
-!MAIN_TAB_COLOR_TOOLTIP;Shortcut: Alt-c
-!MAIN_TAB_DETAIL_TOOLTIP;Shortcut: Alt-d
-!MAIN_TAB_EXPORT; Fast Export
-!MAIN_TAB_EXPOSURE_TOOLTIP;Shortcut: Alt-e
-!MAIN_TAB_FAVORITES;Favorites
-!MAIN_TAB_FAVORITES_TOOLTIP;Shortcut: Alt-u
-!MAIN_TAB_INSPECT; Inspect
-!MAIN_TAB_METADATA_TOOLTIP;Shortcut: Alt-m
-!MAIN_TAB_RAW;Raw
-!MAIN_TAB_RAW_TOOLTIP;Shortcut: Alt-r
-!MAIN_TAB_TRANSFORM_TOOLTIP;Shortcut: Alt-t
-!MAIN_TOOLTIP_BACKCOLOR0;Background color of the preview: theme-based\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR1;Background color of the preview: black\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR2;Background color of the preview: white\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR3;Background color of the preview: middle grey\nShortcut: 9
-!MAIN_TOOLTIP_BEFOREAFTERLOCK;Lock / Unlock the Before view\n\nLock: keep the Before view unchanged.\nUseful to evaluate the cumulative effect of multiple tools.\nAdditionally, comparisons can be made to any state in the History.\n\nUnlock: the Before view will follow the After view one step behind, showing the image before the effect of the currently used tool.
-!MAIN_TOOLTIP_PREVIEWB;Preview the blue channel.\nShortcut: b
-!MAIN_TOOLTIP_PREVIEWFOCUSMASK;Preview the focus mask.\nShortcut: Shift-f\n\nMore accurate on images with shallow depth of field, low noise and at higher zoom levels.\nZoom out to 10-30% to improve detection accuracy on noisy images.
-!MAIN_TOOLTIP_PREVIEWG;Preview the green channel.\nShortcut: g
-!MAIN_TOOLTIP_PREVIEWL;Preview the luminosity.\nShortcut: v\n\n0.299*R + 0.587*G + 0.114*B
-!MAIN_TOOLTIP_PREVIEWR;Preview the red channel.\nShortcut: r
-!MAIN_TOOLTIP_PREVIEWSHARPMASK;Preview the sharpening contrast mask.\nShortcut: p\n\nOnly works when sharpening is enabled and zoom >= 100%.
-!MAIN_TOOLTIP_SHOWHIDELP1;Show/Hide the left panel.\nShortcut: l
-!MAIN_TOOLTIP_SHOWHIDERP1;Show/Hide the right panel.\nShortcut: Alt-l
-!MAIN_TOOLTIP_SHOWHIDETP1;Show/Hide the top panel.\nShortcut: Shift-l
-!MAIN_TOOLTIP_THRESHOLD;Threshold
-!MAIN_TOOLTIP_TOGGLE;Toggle the Before/After view.\nShortcut: Shift-b
-!MONITOR_PROFILE_SYSTEM;System default
-!NAVIGATOR_B;B:
-!NAVIGATOR_G;G:
-!NAVIGATOR_H;H:
-!NAVIGATOR_LAB_A;a*:
-!NAVIGATOR_LAB_B;b*:
-!NAVIGATOR_LAB_L;L*:
-!NAVIGATOR_NA; --
-!NAVIGATOR_R;R:
-!NAVIGATOR_S;S:
-!NAVIGATOR_V;V:
-!NAVIGATOR_XY_FULL;Width: %1, Height: %2
-!NAVIGATOR_XY_NA;x: --, y: --
-!OPTIONS_BUNDLED_MISSING;The bundled profile "%1" could not be found!\n\nYour installation could be damaged.\n\nDefault internal values will be used instead.
-!OPTIONS_DEFIMG_MISSING;The default profile for non-raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!OPTIONS_DEFRAW_MISSING;The default profile for raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!PARTIALPASTE_ADVANCEDGROUP;Advanced Settings
-!PARTIALPASTE_CHANNELMIXER;Channel mixer
-!PARTIALPASTE_CHANNELMIXERBW;Black-and-white
-!PARTIALPASTE_COLORAPP;CIECAM02
-!PARTIALPASTE_COLORTONING;Color toning
-!PARTIALPASTE_COMMONTRANSFORMPARAMS;Auto-fill
-!PARTIALPASTE_DARKFRAMEAUTOSELECT;Dark-frame auto-selection
-!PARTIALPASTE_DARKFRAMEFILE;Dark-frame file
-!PARTIALPASTE_DEFRINGE;Defringe
-!PARTIALPASTE_DEHAZE;Haze removal
-!PARTIALPASTE_DETAILGROUP;Detail Settings
-!PARTIALPASTE_DIRPYRDENOISE;Noise reduction
-!PARTIALPASTE_DIRPYREQUALIZER;Contrast by detail levels
-!PARTIALPASTE_EPD;Tone mapping
-!PARTIALPASTE_EQUALIZER;Wavelet levels
-!PARTIALPASTE_EVERYTHING;Everything
-!PARTIALPASTE_FILMSIMULATION;Film simulation
-!PARTIALPASTE_FLATFIELDAUTOSELECT;Flat-field auto-selection
-!PARTIALPASTE_FLATFIELDBLURRADIUS;Flat-field blur radius
-!PARTIALPASTE_FLATFIELDBLURTYPE;Flat-field blur type
-!PARTIALPASTE_FLATFIELDCLIPCONTROL;Flat-field clip control
-!PARTIALPASTE_FLATFIELDFILE;Flat-field file
-!PARTIALPASTE_GRADIENT;Graduated filter
-!PARTIALPASTE_HSVEQUALIZER;HSV equalizer
-!PARTIALPASTE_IMPULSEDENOISE;Impulse noise reduction
-!PARTIALPASTE_LABCURVE;L*a*b* adjustments
-!PARTIALPASTE_LENSPROFILE;Profiled lens correction
-!PARTIALPASTE_LOCALCONTRAST;Local contrast
-!PARTIALPASTE_METADATA;Metadata mode
-!PARTIALPASTE_PCVIGNETTE;Vignette filter
-!PARTIALPASTE_PERSPECTIVE;Perspective
-!PARTIALPASTE_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!PARTIALPASTE_PREPROCESS_GREENEQUIL;Green equilibration
-!PARTIALPASTE_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!PARTIALPASTE_PREPROCESS_LINEDENOISE;Line noise filter
-!PARTIALPASTE_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!PARTIALPASTE_PRSHARPENING;Post-resize sharpening
-!PARTIALPASTE_RAWCACORR_AUTO;CA auto-correction
-!PARTIALPASTE_RAWCACORR_AVOIDCOLORSHIFT;CA avoid color shift
-!PARTIALPASTE_RAWCACORR_CAREDBLUE;CA red & blue
-!PARTIALPASTE_RAWEXPOS_BLACK;Black levels
-!PARTIALPASTE_RAWEXPOS_LINEAR;White point correction
-!PARTIALPASTE_RAWGROUP;Raw Settings
-!PARTIALPASTE_RAW_BORDER;Raw border
-!PARTIALPASTE_RAW_DCBENHANCE;DCB enhancement
-!PARTIALPASTE_RAW_DCBITERATIONS;DCB iterations
-!PARTIALPASTE_RAW_DMETHOD;Demosaic method
-!PARTIALPASTE_RAW_FALSECOLOR;False color suppression
-!PARTIALPASTE_RAW_IMAGENUM;Sub-image
-!PARTIALPASTE_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!PARTIALPASTE_RAW_PIXELSHIFT;Pixel Shift
-!PARTIALPASTE_RETINEX;Retinex
-!PARTIALPASTE_RGBCURVES;RGB curves
-!PARTIALPASTE_SHARPENEDGE;Edges
-!PARTIALPASTE_SHARPENMICRO;Microcontrast
-!PARTIALPASTE_SOFTLIGHT;Soft light
-!PARTIALPASTE_TM_FATTAL;Dynamic range compression
-!PARTIALPASTE_VIBRANCE;Vibrance
-!PREFERENCES_ADD;Add
-!PREFERENCES_APPEARANCE;Appearance
-!PREFERENCES_APPEARANCE_COLORPICKERFONT;Color picker font
-!PREFERENCES_APPEARANCE_CROPMASKCOLOR;Crop mask color
-!PREFERENCES_APPEARANCE_MAINFONT;Main font
-!PREFERENCES_APPEARANCE_NAVGUIDECOLOR;Navigator guide color
-!PREFERENCES_APPEARANCE_THEME;Theme
-!PREFERENCES_AUTOMONPROFILE;Use operating system's main monitor color profile
-!PREFERENCES_AUTOSAVE_TP_OPEN;Save tool collapsed/expanded state on exit
-!PREFERENCES_BATCH_PROCESSING;Batch Processing
-!PREFERENCES_BEHADDALL;All to 'Add'
-!PREFERENCES_BEHADDALLHINT;Set all parameters to the Add mode.\nAdjustments of parameters in the batch tool panel will be deltas to the stored values.
-!PREFERENCES_BEHAVIOR;Behavior
-!PREFERENCES_BEHSETALL;All to 'Set'
-!PREFERENCES_BEHSETALLHINT;Set all parameters to the Set mode.\nAdjustments of parameters in the batch tool panel will be absolute, the actual values will be displayed.
-!PREFERENCES_BLACKBODY;Tungsten
-!PREFERENCES_CACHECLEAR;Clear
-!PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
-!PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
-!PREFERENCES_CACHECLEAR_ONLYPROFILES;Clear only cached processing profiles:
-!PREFERENCES_CACHECLEAR_SAFETY;Only files in the cache are cleared. Processing profiles stored alongside the source images are not touched.
-!PREFERENCES_CHUNKSIZES;Tiles per thread
-!PREFERENCES_CHUNKSIZE_RAW_AMAZE;AMaZE demosaic
-!PREFERENCES_CHUNKSIZE_RAW_CA;Raw CA correction
-!PREFERENCES_CHUNKSIZE_RAW_RCD;RCD demosaic
-!PREFERENCES_CHUNKSIZE_RAW_XT;Xtrans demosaic
-!PREFERENCES_CHUNKSIZE_RGB;RGB processing
-!PREFERENCES_CLUTSCACHE;HaldCLUT Cache
-!PREFERENCES_CLUTSCACHE_LABEL;Maximum number of cached CLUTs
-!PREFERENCES_CLUTSDIR;HaldCLUT directory
-!PREFERENCES_CMMBPC;Black point compensation
-!PREFERENCES_CROP;Crop Editing
-!PREFERENCES_CROP_AUTO_FIT;Automatically zoom to fit the crop
-!PREFERENCES_CROP_GUIDES;Guides shown when not editing the crop
-!PREFERENCES_CROP_GUIDES_FRAME;Frame
-!PREFERENCES_CROP_GUIDES_FULL;Original
-!PREFERENCES_CROP_GUIDES_NONE;None
-!PREFERENCES_CURVEBBOXPOS;Position of curve copy & paste buttons
-!PREFERENCES_CURVEBBOXPOS_ABOVE;Above
-!PREFERENCES_CURVEBBOXPOS_BELOW;Below
-!PREFERENCES_CURVEBBOXPOS_LEFT;Left
-!PREFERENCES_CURVEBBOXPOS_RIGHT;Right
-!PREFERENCES_CUSTPROFBUILD;Custom Processing Profile Builder
-!PREFERENCES_CUSTPROFBUILDHINT;Executable (or script) file called when a new initial processing profile should be generated for an image.\n\nThe path of the communication file (*.ini style, a.k.a. "Keyfile") is added as a command line parameter. It contains various parameters required for the scripts and image Exif to allow a rules-based processing profile generation.\n\nWARNING: You are responsible for using double quotes where necessary if you're using paths containing spaces.
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys format
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
-!PREFERENCES_CUSTPROFBUILDPATH;Executable path
-!PREFERENCES_D50;Settings in main menu
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_D55;5500K
-!PREFERENCES_D60;6000K
-!PREFERENCES_D65;6500K
-!PREFERENCES_DARKFRAMEFOUND;Found
-!PREFERENCES_DARKFRAMESHOTS;shots
-!PREFERENCES_DARKFRAMETEMPLATES;templates
-!PREFERENCES_DIRDARKFRAMES;Dark-frames directory
-!PREFERENCES_DIRECTORIES;Directories
-!PREFERENCES_EDITORCMDLINE;Custom command line
-!PREFERENCES_EDITORLAYOUT;Editor layout
-!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_FLATFIELDFOUND;Found
-!PREFERENCES_FLATFIELDSDIR;Flat-fields directory
-!PREFERENCES_FLATFIELDSHOTS;shots
-!PREFERENCES_FLATFIELDTEMPLATES;templates
-!PREFERENCES_FLUOF2;Fluorescent F2
-!PREFERENCES_FLUOF7;Fluorescent F7
-!PREFERENCES_FLUOF11;Fluorescent F11
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY;Output device's Yb luminance (%)
-!PREFERENCES_GREY05;Yb=05 CIE L#30
-!PREFERENCES_GREY10;Yb=10 CIE L#40
-!PREFERENCES_GREY15;Yb=15 CIE L#45
-!PREFERENCES_GREY18;Settings in main menu
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREY23;Yb=23 CIE L#55
-!PREFERENCES_GREY30;Yb=30 CIE L#60
-!PREFERENCES_GREY40;Yb=40 CIE L#70
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram in left panel
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
-!PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
-!PREFERENCES_INSPECT_LABEL;Inspect
-!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
-!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
-!PREFERENCES_INTERNALTHUMBIFUNTOUCHED;Show embedded JPEG thumbnail if raw is unedited
-!PREFERENCES_LANG;Language
-!PREFERENCES_LANGAUTODETECT;Use system language
-!PREFERENCES_MAXRECENTFOLDERS;Maximum number of recent folders
-!PREFERENCES_MENUGROUPEXTPROGS;Group "Open with"
-!PREFERENCES_MENUGROUPFILEOPERATIONS;Group "File operations"
-!PREFERENCES_MENUGROUPLABEL;Group "Color label"
-!PREFERENCES_MENUGROUPPROFILEOPERATIONS;Group "Processing profile operations"
-!PREFERENCES_MENUGROUPRANK;Group "Rank"
-!PREFERENCES_MENUOPTIONS;Context Menu Options
-!PREFERENCES_METADATA;Metadata
-!PREFERENCES_MONINTENT;Default rendering intent
-!PREFERENCES_MONITOR;Monitor
-!PREFERENCES_MONPROFILE;Default color profile
-!PREFERENCES_MONPROFILE_WARNOSX;Due to MacOS limitations, only sRGB is supported.
-!PREFERENCES_MULTITAB;Multiple Editor Tabs Mode
-!PREFERENCES_MULTITABDUALMON;Multiple Editor Tabs In Own Window Mode
-!PREFERENCES_NAVIGATIONFRAME;Navigation
-!PREFERENCES_OVERLAY_FILENAMES;Overlay filenames on thumbnails in the file browser
-!PREFERENCES_OVERLAY_FILENAMES_FILMSTRIP;Overlay filenames on thumbnails in the editor pannel
-!PREFERENCES_OVERWRITEOUTPUTFILE;Overwrite existing output files
-!PREFERENCES_PANFACTORLABEL;Pan rate amplification
-!PREFERENCES_PARSEDEXTDOWNHINT;Move selected extension down in the list.
-!PREFERENCES_PARSEDEXTUPHINT;Move selected extension up in the list.
-!PREFERENCES_PERFORMANCE_MEASURE;Measure
-!PREFERENCES_PERFORMANCE_MEASURE_HINT;Logs processing times in console
-!PREFERENCES_PERFORMANCE_THREADS;Threads
-!PREFERENCES_PERFORMANCE_THREADS_LABEL;Maximum number of threads for Noise Reduction and Wavelet Levels (0 = Automatic)
-!PREFERENCES_PREVDEMO;Preview Demosaic Method
-!PREFERENCES_PREVDEMO_FAST;Fast
-!PREFERENCES_PREVDEMO_LABEL;Demosaicing method used for the preview at <100% zoom:
-!PREFERENCES_PREVDEMO_SIDECAR;As in PP3
-!PREFERENCES_PRINTER;Printer (Soft-Proofing)
-!PREFERENCES_PROFILESAVEBOTH;Save processing profile both to the cache and next to the input file
-!PREFERENCES_PROFILESAVELOCATION;Processing profile saving location
-!PREFERENCES_PROFILE_NONE;None
-!PREFERENCES_PROPERTY;Property
-!PREFERENCES_PRTINTENT;Rendering intent
-!PREFERENCES_PRTPROFILE;Color profile
-!PREFERENCES_REMEMBERZOOMPAN;Remember zoom % and pan offset
-!PREFERENCES_REMEMBERZOOMPAN_TOOLTIP;Remember the zoom % and pan offset of the current image when opening a new image.\n\nThis option only works in "Single Editor Tab Mode" and when "Demosaicing method used for the preview at <100% zoom" is set to "As in PP3".
-!PREFERENCES_SAVE_TP_OPEN_NOW;Save tool collapsed/expanded state now
-!PREFERENCES_SERIALIZE_TIFF_READ;TIFF Read Settings
-!PREFERENCES_SERIALIZE_TIFF_READ_LABEL;Serialize reading of TIFF files
-!PREFERENCES_SERIALIZE_TIFF_READ_TOOLTIP;Enabling this option when working with folders containing uncompressed TIFF files can increase performance of thumbnail generation.
-!PREFERENCES_SET;Set
-!PREFERENCES_SHOWEXPOSURECOMPENSATION;Append exposure compensation
-!PREFERENCES_SHOWFILMSTRIPTOOLBAR;Show Filmstrip toolbar
-!PREFERENCES_SINGLETAB;Single Editor Tab Mode
-!PREFERENCES_SINGLETABVERTAB;Single Editor Tab Mode, Vertical Tabs
-!PREFERENCES_SND_BATCHQUEUEDONE;Queue processing done
-!PREFERENCES_SND_HELP;Enter a full file path to set a sound, or leave blank for no sound.\nFor system sounds on Windows use "SystemDefault", "SystemAsterisk" etc., and on Linux use "complete", "window-attention" etc.
-!PREFERENCES_SND_LNGEDITPROCDONE;Editor processing done
-!PREFERENCES_SND_THRESHOLDSECS;After seconds
-!PREFERENCES_TAB_DYNAMICPROFILE;Dynamic Profile Rules
-!PREFERENCES_TAB_PERFORMANCE;Performance
-!PREFERENCES_TAB_SOUND;Sounds
-!PREFERENCES_THUMBNAIL_INSPECTOR_JPEG;Embedded JPEG preview
-!PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TP_LABEL;Tool panel:
-!PREFERENCES_TP_VSCROLLBAR;Hide vertical scrollbar
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
-!PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-!PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
-!PREFERENCES_WORKFLOW;Layout
-!PROFILEPANEL_COPYPPASTE;Parameters to copy
-!PROFILEPANEL_GLOBALPROFILES;Bundled profiles
-!PROFILEPANEL_LOADPPASTE;Parameters to load
-!PROFILEPANEL_MODE_TIP;Processing profile fill mode.\n\nButton pressed: partial profiles will be converted to full profiles; the missing values will be replaced with hard-coded defaults.\n\nButton released: profiles will be applied as they are, altering only those values which they contain.
-!PROFILEPANEL_MYPROFILES;My profiles
-!PROFILEPANEL_PASTEPPASTE;Parameters to paste
-!PROFILEPANEL_PDYNAMIC;Dynamic
-!PROFILEPANEL_PINTERNAL;Neutral
-!PROFILEPANEL_SAVEPPASTE;Parameters to save
-!PROGRESSBAR_DECODING;Decoding...
-!PROGRESSBAR_GREENEQUIL;Green equilibration...
-!PROGRESSBAR_HLREC;Highlight reconstruction...
-!PROGRESSBAR_HOTDEADPIXELFILTER;Hot/dead pixel filter...
-!PROGRESSBAR_LINEDENOISE;Line noise filter...
-!PROGRESSBAR_LOADINGTHUMBS;Loading thumbnails...
-!PROGRESSBAR_NOIMAGES;No images found
-!PROGRESSBAR_PROCESSING_PROFILESAVED;Processing profile saved
-!PROGRESSBAR_RAWCACORR;Raw CA correction...
-!PROGRESSBAR_SNAPSHOT_ADDED;Snapshot added
-!PROGRESSDLG_PROFILECHANGEDINBROWSER;Processing profile changed in browser
-!QINFO_FRAMECOUNT;%2 frames
-!QINFO_HDR;HDR / %2 frame(s)
-!QINFO_PIXELSHIFT;Pixel Shift / %2 frame(s)
-!SAMPLEFORMAT_0;Unknown data format
-!SAMPLEFORMAT_1;8-bit unsigned
-!SAMPLEFORMAT_2;16-bit unsigned
-!SAMPLEFORMAT_4;24-bit LogLuv
-!SAMPLEFORMAT_8;32-bit LogLuv
-!SAMPLEFORMAT_16;16-bit floating-point
-!SAMPLEFORMAT_32;24-bit floating-point
-!SAMPLEFORMAT_64;32-bit floating-point
-!SAVEDLG_AUTOSUFFIX;Automatically add a suffix if the file already exists
-!SAVEDLG_FILEFORMAT_FLOAT; floating-point
-!SAVEDLG_FORCEFORMATOPTS;Force saving options
-!SAVEDLG_SUBSAMP;Subsampling
-!SAVEDLG_SUBSAMP_1;Best compression
-!SAVEDLG_SUBSAMP_2;Balanced
-!SAVEDLG_SUBSAMP_3;Best quality
-!SAVEDLG_SUBSAMP_TOOLTIP;Best compression:\nJ:a:b 4:2:0\nh/v 2/2\nChroma halved horizontally and vertically.\n\nBalanced:\nJ:a:b 4:2:2\nh/v 2/1\nChroma halved horizontally.\n\nBest quality:\nJ:a:b 4:4:4\nh/v 1/1\nNo chroma subsampling.
-!SAVEDLG_WARNFILENAME;File will be named
-!SHCSELECTOR_TOOLTIP;Click right mouse button to reset the position of those 3 sliders.
-!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
-!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!THRESHOLDSELECTOR_B;Bottom
-!THRESHOLDSELECTOR_BL;Bottom-left
-!THRESHOLDSELECTOR_BR;Bottom-right
-!THRESHOLDSELECTOR_HINT;Hold the Shift key to move individual control points.
-!THRESHOLDSELECTOR_T;Top
-!THRESHOLDSELECTOR_TL;Top-left
-!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
-!TP_BWMIX_ALGO;Algorithm OYCPM
-!TP_BWMIX_ALGO_LI;Linear
-!TP_BWMIX_ALGO_SP;Special effects
-!TP_BWMIX_ALGO_TOOLTIP;Linear: will produce a normal linear response.\nSpecial effects: will produce special effects by mixing channels non-linearly.
-!TP_BWMIX_AUTOCH;Auto
-!TP_BWMIX_CC_ENABLED;Adjust complementary color
-!TP_BWMIX_CC_TOOLTIP;Enable to allow automatic adjustment of complementary colors in ROYGCBPM mode.
-!TP_BWMIX_CHANNEL;Luminance equalizer
-!TP_BWMIX_CURVEEDITOR1;'Before' curve
-!TP_BWMIX_CURVEEDITOR2;'After' curve
-!TP_BWMIX_CURVEEDITOR_AFTER_TOOLTIP;Tone curve, after B&W conversion, at the end of treatment.
-!TP_BWMIX_CURVEEDITOR_BEFORE_TOOLTIP;Tone curve, just before B&W conversion.\nMay take into account the color components.
-!TP_BWMIX_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H).\nPay attention to extreme values as they may cause artifacts.
-!TP_BWMIX_FILTER;Color Filter
-!TP_BWMIX_FILTER_BLUE;Blue
-!TP_BWMIX_FILTER_BLUEGREEN;Blue-Green
-!TP_BWMIX_FILTER_GREEN;Green
-!TP_BWMIX_FILTER_GREENYELLOW;Green-Yellow
-!TP_BWMIX_FILTER_NONE;None
-!TP_BWMIX_FILTER_PURPLE;Purple
-!TP_BWMIX_FILTER_RED;Red
-!TP_BWMIX_FILTER_REDYELLOW;Red-Yellow
-!TP_BWMIX_FILTER_TOOLTIP;The color filter simulates shots taken with a colored filter placed in front of the lens. Colored filters reduce the transmission of specific color ranges and therefore affect their lightness. E.g. a red filter darkens blue skies.
-!TP_BWMIX_FILTER_YELLOW;Yellow
-!TP_BWMIX_GAMMA;Gamma Correction
-!TP_BWMIX_GAM_TOOLTIP;Correct gamma for each RGB channel.
-!TP_BWMIX_LABEL;Black-and-White
-!TP_BWMIX_MET;Method
-!TP_BWMIX_MET_CHANMIX;Channel Mixer
-!TP_BWMIX_MET_DESAT;Desaturation
-!TP_BWMIX_MET_LUMEQUAL;Luminance Equalizer
-!TP_BWMIX_MIXC;Channel Mixer
-!TP_BWMIX_NEUTRAL;Reset
-!TP_BWMIX_RGBLABEL;R: %1%% G: %2%% B: %3%% Total: %4%%
-!TP_BWMIX_RGBLABEL_HINT;Final RGB factors that take care of all the mixer options.\n"Total" displays the sum of the RGB values:\n- always 100% in relative mode\n- higher (lighter) or lower (darker) than 100% in absolute mode.
-!TP_BWMIX_RGB_TOOLTIP;Mix the RGB channels. Use presets for guidance.\nPay attention to negative values that may cause artifacts or erratic behavior.
-!TP_BWMIX_SETTING;Presets
-!TP_BWMIX_SETTING_TOOLTIP;Different presets (film, landscape, etc.) or manual Channel Mixer settings.
-!TP_BWMIX_SET_HIGHCONTAST;High contrast
-!TP_BWMIX_SET_HIGHSENSIT;High Sensitivity
-!TP_BWMIX_SET_HYPERPANCHRO;Hyper Panchromatic
-!TP_BWMIX_SET_INFRARED;Infrared
-!TP_BWMIX_SET_LANDSCAPE;Landscape
-!TP_BWMIX_SET_LOWSENSIT;Low Sensitivity
-!TP_BWMIX_SET_LUMINANCE;Luminance
-!TP_BWMIX_SET_NORMCONTAST;Normal Contrast
-!TP_BWMIX_SET_ORTHOCHRO;Orthochromatic
-!TP_BWMIX_SET_PANCHRO;Panchromatic
-!TP_BWMIX_SET_PORTRAIT;Portrait
-!TP_BWMIX_SET_RGBABS;Absolute RGB
-!TP_BWMIX_SET_RGBREL;Relative RGB
-!TP_BWMIX_SET_ROYGCBPMABS;Absolute ROYGCBPM
-!TP_BWMIX_SET_ROYGCBPMREL;Relative ROYGCBPM
-!TP_BWMIX_TCMODE_FILMLIKE;B&W Film-like
-!TP_BWMIX_TCMODE_SATANDVALBLENDING;B&W Saturation and Value Blending
-!TP_BWMIX_TCMODE_STANDARD;B&W Standard
-!TP_BWMIX_TCMODE_WEIGHTEDSTD;B&W Weighted Standard
-!TP_BWMIX_VAL;L
-!TP_CBDL_AFT;After Black-and-White
-!TP_CBDL_BEF;Before Black-and-White
-!TP_CBDL_METHOD;Process located
-!TP_CBDL_METHOD_TOOLTIP;Choose whether the Contrast by Detail Levels tool is to be positioned after the Black-and-White tool, which makes it work in L*a*b* space, or before it, which makes it work in RGB space.
-!TP_CHROMATABERR_LABEL;Chromatic Aberration
-!TP_COLORAPP_ABSOLUTELUMINANCE;Absolute luminance
-!TP_COLORAPP_ALGO;Algorithm
-!TP_COLORAPP_ALGO_ALL;All
-!TP_COLORAPP_ALGO_JC;Lightness + Chroma (JC)
-!TP_COLORAPP_ALGO_JS;Lightness + Saturation (JS)
-!TP_COLORAPP_ALGO_QM;Brightness + Colorfulness (QM)
-!TP_COLORAPP_ALGO_TOOLTIP;Lets you choose between parameter subsets or all parameters.
-!TP_COLORAPP_BADPIXSL;Hot/bad pixel filter
-!TP_COLORAPP_BADPIXSL_TOOLTIP;Suppression of hot/bad (brightly colored) pixels.\n0 = No effect\n1 = Median\n2 = Gaussian.\nAlternatively, adjust the image to avoid very dark shadows.\n\nThese artifacts are due to limitations of CIECAM02.
-!TP_COLORAPP_BRIGHT;Brightness (Q)
-!TP_COLORAPP_BRIGHT_TOOLTIP;Brightness in CIECAM02 takes into account the white's luminosity and differs from L*a*b* and RGB brightness.
-!TP_COLORAPP_CAT02ADAPTATION_TOOLTIP;When setting manually, values above 65 are recommended.
-!TP_COLORAPP_CHROMA;Chroma (C)
-!TP_COLORAPP_CHROMA_M;Colorfulness (M)
-!TP_COLORAPP_CHROMA_M_TOOLTIP;Colorfulness in CIECAM02 differs from L*a*b* and RGB colorfulness.
-!TP_COLORAPP_CHROMA_S;Saturation (S)
-!TP_COLORAPP_CHROMA_S_TOOLTIP;Saturation in CIECAM02 differs from L*a*b* and RGB saturation.
-!TP_COLORAPP_CHROMA_TOOLTIP;Chroma in CIECAM02 differs from L*a*b* and RGB chroma.
-!TP_COLORAPP_CIECAT_DEGREE;CAT02 adaptation
-!TP_COLORAPP_CONTRAST;Contrast (J)
-!TP_COLORAPP_CONTRAST_Q;Contrast (Q)
-!TP_COLORAPP_CONTRAST_Q_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CONTRAST_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CURVEEDITOR1;Tone curve 1
-!TP_COLORAPP_CURVEEDITOR1_TOOLTIP;Shows the histogram of L* (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of J or Q after CIECAM02.\n\nJ and Q are not shown in the main histogram panel.\n\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_CURVEEDITOR2;Tone curve 2
-!TP_COLORAPP_CURVEEDITOR2_TOOLTIP;Same usage as with the second exposure tone curve.
-!TP_COLORAPP_CURVEEDITOR3;Color curve
-!TP_COLORAPP_CURVEEDITOR3_TOOLTIP;Adjust either chroma, saturation or colorfulness.\n\nShows the histogram of chromaticity (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of C, s or M after CIECAM02.\n\nC, s and M are not shown in the main histogram panel.\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_DATACIE;CIECAM02 output histograms in curves
-!TP_COLORAPP_DATACIE_TOOLTIP;When enabled, histograms in CIECAM02 curves show approximate values/ranges for J or Q, and C, s or M after the CIECAM02 adjustments.\nThis selection does not impact the main histogram panel.\n\nWhen disabled, histograms in CIECAM02 curves show L*a*b* values before CIECAM02 adjustments.
-!TP_COLORAPP_FREE;Free temp+green + CAT02 + [output]
-!TP_COLORAPP_GAMUT;Gamut control (L*a*b*)
-!TP_COLORAPP_GAMUT_TOOLTIP;Allow gamut control in L*a*b* mode.
-!TP_COLORAPP_HUE;Hue (h)
-!TP_COLORAPP_HUE_TOOLTIP;Hue (h) - angle between 0° and 360°.
-!TP_COLORAPP_LABEL;CIE Color Appearance Model 2002
-!TP_COLORAPP_LABEL_CAM02;Image Adjustments
-!TP_COLORAPP_LABEL_SCENE;Scene Conditions
-!TP_COLORAPP_LABEL_VIEWING;Viewing Conditions
-!TP_COLORAPP_LIGHT;Lightness (J)
-!TP_COLORAPP_LIGHT_TOOLTIP;Lightness in CIECAM02 differs from L*a*b* and RGB lightness.
-!TP_COLORAPP_MEANLUMINANCE;Mean luminance (Yb%)
-!TP_COLORAPP_MODEL;WP Model
-!TP_COLORAPP_MODEL_TOOLTIP;White-Point Model.\n\nWB [RT] + [output]: RT's white balance is used for the scene, CIECAM02 is set to D50, and the output device's white balance is set in Viewing Conditions.\n\nWB [RT+CAT02] + [output]: RT's white balance settings are used by CAT02 and the output device's white balance is set in Viewing Conditions.\n\nFree temp+green + CAT02 + [output]: temp and green are selected by the user, the output device's white balance is set in Viewing Conditions.
-!TP_COLORAPP_NEUTRAL;Reset
-!TP_COLORAPP_NEUTRAL_TIP;Reset all sliders checkbox and curves to their default values
-!TP_COLORAPP_RSTPRO;Red & skin-tones protection
-!TP_COLORAPP_RSTPRO_TOOLTIP;Red & skin-tones protection affects both sliders and curves.
-!TP_COLORAPP_SURROUND;Surround
-!TP_COLORAPP_SURROUND_AVER;Average
-!TP_COLORAPP_SURROUND_DARK;Dark
-!TP_COLORAPP_SURROUND_DIM;Dim
-!TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
-!TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\nAverage: Average light environment (standard). The image will not change.\n\nDim: Dim environment (TV). The image will become slighty dark.\n\nDark: Dark environment (projector). The image will become more dark.\n\nExtremly Dark: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
-!TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
-!TP_COLORAPP_TCMODE_CHROMA;Chroma
-!TP_COLORAPP_TCMODE_COLORF;Colorfulness
-!TP_COLORAPP_TCMODE_LABEL1;Curve mode 1
-!TP_COLORAPP_TCMODE_LABEL2;Curve mode 2
-!TP_COLORAPP_TCMODE_LABEL3;Curve chroma mode
-!TP_COLORAPP_TCMODE_LIGHTNESS;Lightness
-!TP_COLORAPP_TCMODE_SATUR;Saturation
-!TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD50 temp=5003\nD55 temp=5503\nD65 temp=6504\nD75 temp=7504
-!TP_COLORAPP_TONECIE;Tone mapping using CIECAM02
-!TP_COLORAPP_TONECIE_TOOLTIP;If this option is disabled, tone mapping is done in L*a*b* space.\nIf this option is enabled, tone mapping is done using CIECAM02.\nThe Tone Mapping tool must be enabled for this setting to take effect.
-!TP_COLORAPP_VIEWING_ABSOLUTELUMINANCE_TOOLTIP;Absolute luminance of the viewing environment\n(usually 16 cd/m²).
-!TP_COLORAPP_WBCAM;WB [RT+CAT02] + [output]
-!TP_COLORAPP_WBRT;WB [RT] + [output]
-!TP_COLORTONING_AB;o C/L
-!TP_COLORTONING_AUTOSAT;Automatic
-!TP_COLORTONING_BALANCE;Balance
-!TP_COLORTONING_BY;o C/L
-!TP_COLORTONING_CHROMAC;Opacity
-!TP_COLORTONING_COLOR;Color
-!TP_COLORTONING_CURVEEDITOR_CL_TOOLTIP;Chroma opacity as a function of luminance oC=f(L)
-!TP_COLORTONING_HIGHLIGHT;Highlights
-!TP_COLORTONING_HUE;Hue
-!TP_COLORTONING_LAB;L*a*b* blending
-!TP_COLORTONING_LABEL;Color Toning
-!TP_COLORTONING_LABGRID;L*a*b* color correction grid
-!TP_COLORTONING_LABGRID_VALUES;HL: a=%1 b=%2\nS: a=%3 b=%4
-!TP_COLORTONING_LABREGIONS;Color correction regions
-!TP_COLORTONING_LABREGION_ABVALUES;a=%1 b=%2
-!TP_COLORTONING_LABREGION_CHANNEL;Channel
-!TP_COLORTONING_LABREGION_CHANNEL_ALL;All
-!TP_COLORTONING_LABREGION_CHANNEL_B;Blue
-!TP_COLORTONING_LABREGION_CHANNEL_G;Green
-!TP_COLORTONING_LABREGION_CHANNEL_R;Red
-!TP_COLORTONING_LABREGION_CHROMATICITYMASK;C
-!TP_COLORTONING_LABREGION_HUEMASK;H
-!TP_COLORTONING_LABREGION_LIGHTNESS;Lightness
-!TP_COLORTONING_LABREGION_LIGHTNESSMASK;L
-!TP_COLORTONING_LABREGION_LIST_TITLE;Correction
-!TP_COLORTONING_LABREGION_MASK;Mask
-!TP_COLORTONING_LABREGION_MASKBLUR;Mask Blur
-!TP_COLORTONING_LABREGION_OFFSET;Offset
-!TP_COLORTONING_LABREGION_POWER;Power
-!TP_COLORTONING_LABREGION_SATURATION;Saturation
-!TP_COLORTONING_LABREGION_SHOWMASK;Show mask
-!TP_COLORTONING_LABREGION_SLOPE;Slope
-!TP_COLORTONING_LUMA;Luminance
-!TP_COLORTONING_LUMAMODE;Preserve luminance
-!TP_COLORTONING_LUMAMODE_TOOLTIP;If enabled, when you change color (red, green, cyan, blue, etc.) the luminance of each pixel is preserved.
-!TP_COLORTONING_METHOD;Method
-!TP_COLORTONING_METHOD_TOOLTIP;"L*a*b* blending", "RGB sliders" and "RGB curves" use interpolated color blending.\n"Color balance (Shadows/Midtones/Highlights)" and "Saturation 2 colors" use direct colors.\n\nThe Black-and-White tool can be enabled when using any color toning method, which allows for color toning.
-!TP_COLORTONING_MIDTONES;Midtones
-!TP_COLORTONING_NEUTRAL;Reset sliders
-!TP_COLORTONING_NEUTRAL_TIP;Reset all values (Shadows, Midtones, Highlights) to default.
-!TP_COLORTONING_OPACITY;Opacity
-!TP_COLORTONING_RGBCURVES;RGB - Curves
-!TP_COLORTONING_RGBSLIDERS;RGB - Sliders
-!TP_COLORTONING_SA;Saturation Protection
-!TP_COLORTONING_SATURATEDOPACITY;Strength
-!TP_COLORTONING_SATURATIONTHRESHOLD;Threshold
-!TP_COLORTONING_SHADOWS;Shadows
-!TP_COLORTONING_SPLITCO;Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITCOCO;Color Balance Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITLR;Saturation 2 colors
-!TP_COLORTONING_STR;Strength
-!TP_COLORTONING_STRENGTH;Strength
-!TP_COLORTONING_TWO2;Special chroma '2 colors'
-!TP_COLORTONING_TWOALL;Special chroma
-!TP_COLORTONING_TWOBY;Special a* and b*
-!TP_COLORTONING_TWOCOLOR_TOOLTIP;Standard chroma:\nLinear response, a* = b*.\n\nSpecial chroma:\nLinear response, a* = b*, but unbound - try under the diagonal.\n\nSpecial a* and b*:\nLinear response unbound with separate curves for a* and b*. Intended for special effects.\n\nSpecial chroma 2 colors:\nMore predictable.
-!TP_COLORTONING_TWOSTD;Standard chroma
-!TP_CROP_GTEPASSPORT;Biometric Passport
-!TP_CROP_GTFRAME;Frame
-!TP_CROP_GTGRID;Grid
-!TP_CROP_GTHARMMEANS;Harmonic Means
-!TP_CROP_GTTRIANGLE1;Golden Triangles 1
-!TP_CROP_GTTRIANGLE2;Golden Triangles 2
-!TP_CROP_PPI;PPI
-!TP_CROP_RESETCROP;Reset
-!TP_CROP_SELECTCROP;Select
-!TP_DARKFRAME_AUTOSELECT;Auto-selection
-!TP_DARKFRAME_LABEL;Dark-Frame
-!TP_DEFRINGE_LABEL;Defringe
-!TP_DEFRINGE_RADIUS;Radius
-!TP_DEFRINGE_THRESHOLD;Threshold
-!TP_DEHAZE_DEPTH;Depth
-!TP_DEHAZE_LABEL;Haze Removal
-!TP_DEHAZE_SHOW_DEPTH_MAP;Show depth map
-!TP_DEHAZE_STRENGTH;Strength
-!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
-!TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
-!TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominance
-!TP_DIRPYRDENOISE_CHROMINANCE_MANUAL;Manual
-!TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Chrominance - Master
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD;Method
-!TP_DIRPYRDENOISE_CHROMINANCE_METHODADVANCED_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nAutomatic multi-zones\nNo preview - works only during saving, but using the "Preview" method by matching the tile size and center to the preview size and center you can get an idea of the expected results.\nThe image is divided into tiles (about 10 to 70 depending on image size) and each tile receives its own chrominance noise reduction settings.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_PMZ;Preview multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW;Preview
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEWRESIDUAL_INFO_TOOLTIP;Displays the remaining noise levels of the part of the image visible in the preview after wavelet.\n\n>300 Very noisy\n100-300 Noisy\n50-100 A little noisy\n<50 Very low noise\n\nBeware, the values will differ between RGB and L*a*b* mode. The RGB values are less accurate because the RGB mode does not completely separate luminance and chrominance.
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_INFO;Preview size=%1, Center: Px=%2 Py=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Preview noise: Mean=%1 High=%2
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= - High= -
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2 Ty=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
-!TP_DIRPYRDENOISE_LABEL;Noise Reduction
-!TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
-!TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
-!TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Detail recovery
-!TP_DIRPYRDENOISE_LUMINANCE_FRAME;Luminance
-!TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminance
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE;Color space
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;For raw images either RGB or L*a*b* methods can be used.\n\nFor non-raw images the L*a*b* method will be used, regardless of the selection.
-!TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
-!TP_DIRPYRDENOISE_MAIN_GAMMA_TOOLTIP;Gamma varies noise reduction strength across the range of tones. Smaller values will target shadows, while larger values will stretch the effect to the brighter tones.
-!TP_DIRPYRDENOISE_MAIN_MODE;Mode
-!TP_DIRPYRDENOISE_MAIN_MODE_AGGRESSIVE;Aggressive
-!TP_DIRPYRDENOISE_MAIN_MODE_CONSERVATIVE;Conservative
-!TP_DIRPYRDENOISE_MAIN_MODE_TOOLTIP;"Conservative" preserves low frequency chroma patterns, while "aggressive" obliterates them.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD;Median method
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_CHROMINANCE;Chroma only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LABEL;Median Filter
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LUMINANCE;Luminance only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_RGB;RGB
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_TOOLTIP;When using the "Luminance only" and "L*a*b*" methods, median filtering will be performed just after the wavelet step in the noise reduction pipeline.\nWhen using the "RGB" mode, it will be performed at the very end of the noise reduction pipeline.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_WEIGHTED;Weighted L* (little) + a*b* (normal)
-!TP_DIRPYRDENOISE_MEDIAN_PASSES;Median iterations
-!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
-!TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
-!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
-!TP_DIRPYRDENOISE_TYPE_3X3;3×3
-!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
-!TP_DIRPYRDENOISE_TYPE_5X5;5×5
-!TP_DIRPYRDENOISE_TYPE_5X5SOFT;5×5 soft
-!TP_DIRPYRDENOISE_TYPE_7X7;7×7
-!TP_DIRPYRDENOISE_TYPE_9X9;9×9
-!TP_DIRPYREQUALIZER_ALGO;Skin Color Range
-!TP_DIRPYREQUALIZER_ALGO_TOOLTIP;Fine: closer to the colors of the skin, minimizing the action on other colors\nLarge: avoid more artifacts.
-!TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts
-!TP_DIRPYREQUALIZER_HUESKIN;Skin hue
-!TP_DIRPYREQUALIZER_HUESKIN_TOOLTIP;This pyramid is for the upper part, so far as the algorithm at its maximum efficiency.\nTo the lower part, the transition zones.\nIf you need to move the area significantly to the left or right - or if there are artifacts: the white balance is incorrect\nYou can slightly reduce the zone to prevent the rest of the image is affected.
-!TP_DIRPYREQUALIZER_LABEL;Contrast by Detail Levels
-!TP_DIRPYREQUALIZER_LUMACOARSEST;Coarsest
-!TP_DIRPYREQUALIZER_LUMACONTRAST_MINUS;Contrast -
-!TP_DIRPYREQUALIZER_LUMACONTRAST_PLUS;Contrast +
-!TP_DIRPYREQUALIZER_LUMAFINEST;Finest
-!TP_DIRPYREQUALIZER_LUMANEUTRAL;Neutral
-!TP_DIRPYREQUALIZER_SKIN;Skin targetting/protection
-!TP_DIRPYREQUALIZER_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_DIRPYREQUALIZER_THRESHOLD;Threshold
-!TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image.
-!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
-!TP_EPD_EDGESTOPPING;Edge stopping
-!TP_EPD_GAMMA;Gamma
-!TP_EPD_LABEL;Tone Mapping
-!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
-!TP_EPD_SCALE;Scale
-!TP_EPD_STRENGTH;Strength
-!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
-!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
-!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
-!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
-!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
-!TP_EXPOSURE_CURVEEDITOR2;Tone curve 2
-!TP_EXPOSURE_CURVEEDITOR2_TOOLTIP;Please refer to the "Exposure > Tone Curves" RawPedia article to learn how to achieve the best results by using two tone curves.
-!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
-!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
-!TP_EXPOSURE_SATURATION;Saturation
-!TP_EXPOSURE_TCMODE_FILMLIKE;Film-like
-!TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1
-!TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2
-!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
-!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual
-!TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending
-!TP_EXPOSURE_TCMODE_STANDARD;Standard
-!TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard
-!TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points
-!TP_EXPOS_WHITEPOINT_LABEL;Raw White Points
-!TP_FILMSIMULATION_LABEL;Film Simulation
-!TP_FILMSIMULATION_SLOWPARSEDIR;RawTherapee is configured to look for Hald CLUT images, which are used for the Film Simulation tool, in a folder which is taking too long to load.\nGo to Preferences > Image Processing > Film Simulation\nto see which folder is being used. You should either point RawTherapee to a folder which contains only Hald CLUT images and nothing more, or to an empty folder if you don't want to use the Film Simulation tool.\n\nRead the Film Simulation article in RawPedia for more information.\n\nDo you want to cancel the scan now?
-!TP_FILMSIMULATION_STRENGTH;Strength
-!TP_FILMSIMULATION_ZEROCLUTSFOUND;Set HaldCLUT directory in Preferences
-!TP_FLATFIELD_AUTOSELECT;Auto-selection
-!TP_FLATFIELD_BLURRADIUS;Blur radius
-!TP_FLATFIELD_BLURTYPE;Blur type
-!TP_FLATFIELD_BT_AREA;Area
-!TP_FLATFIELD_BT_HORIZONTAL;Horizontal
-!TP_FLATFIELD_BT_VERTHORIZ;Vertical + Horizontal
-!TP_FLATFIELD_BT_VERTICAL;Vertical
-!TP_FLATFIELD_CLIPCONTROL;Clip control
-!TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Clip control avoids clipped highlights caused by applying the flat field. If there are already clipped highlights before applying the flat field, clip control can lead to color cast.
-!TP_FLATFIELD_LABEL;Flat-Field
-!TP_GENERAL_11SCALE_TOOLTIP;The effects of this tool are only visible or only accurate at a preview scale of 1:1.
-!TP_GRADIENT_CENTER;Center
-!TP_GRADIENT_CENTER_X;Center X
-!TP_GRADIENT_CENTER_X_TOOLTIP;Shift gradient to the left (negative values) or right (positive values).
-!TP_GRADIENT_CENTER_Y;Center Y
-!TP_GRADIENT_CENTER_Y_TOOLTIP;Shift gradient up (negative values) or down (positive values).
-!TP_GRADIENT_DEGREE;Angle
-!TP_GRADIENT_DEGREE_TOOLTIP;Rotation angle in degrees.
-!TP_GRADIENT_FEATHER;Feather
-!TP_GRADIENT_FEATHER_TOOLTIP;Gradient width in percent of the image diagonal.
-!TP_GRADIENT_LABEL;Graduated Filter
-!TP_GRADIENT_STRENGTH;Strength
-!TP_GRADIENT_STRENGTH_TOOLTIP;Filter strength in stops.
-!TP_HLREC_BLEND;Blend
-!TP_HLREC_ENA_TOOLTIP;Could be activated by Auto Levels.
-!TP_HSVEQUALIZER_CHANNEL;Channel
-!TP_HSVEQUALIZER_HUE;H
-!TP_HSVEQUALIZER_LABEL;HSV Equalizer
-!TP_HSVEQUALIZER_SAT;S
-!TP_HSVEQUALIZER_VAL;V
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Baseline exposure
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET_TOOLTIP;Employ the embedded DCP baseline exposure offset. The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYHUESATMAP;Base table
-!TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYLOOKTABLE;Look table
-!TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-!TP_ICM_BLENDCMSMATRIX;Blend ICC highlights with matrix
-!TP_ICM_BLENDCMSMATRIX_TOOLTIP;Enable to recover clipped highlights when using LUT-based ICC profiles.
-!TP_ICM_BPC;Black Point Compensation
-!TP_ICM_DCPILLUMINANT;Illuminant
-!TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
-!TP_ICM_DCPILLUMINANT_TOOLTIP;Select which embedded DCP illuminant to employ. Default is "interpolated" which is a mix between the two based on white balance. The setting is only available if a dual-illuminant DCP with interpolation support is selected.
-!TP_ICM_INPUTCAMERAICC;Auto-matched camera profile
-!TP_ICM_INPUTCAMERAICC_TOOLTIP;Use RawTherapee's camera-specific DCP or ICC input color profiles. These profiles are more precise than simpler matrix ones. They are not available for all cameras. These profiles are stored in the /iccprofiles/input and /dcpprofiles folders and are automatically retrieved based on a file name matching to the exact model name of the camera.
-!TP_ICM_INPUTCAMERA_TOOLTIP;Use a simple color matrix from dcraw, an enhanced RawTherapee version (whichever is available based on camera model) or one embedded in the DNG.
-!TP_ICM_INPUTCUSTOM_TOOLTIP;Select your own DCP/ICC color profile file for the camera.
-!TP_ICM_INPUTEMBEDDED_TOOLTIP;Use color profile embedded in non-raw files.
-!TP_ICM_INPUTNONE;No profile
-!TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases.
-!TP_ICM_PROFILEINTENT;Rendering Intent
-!TP_ICM_SAVEREFERENCE;Save Reference Image
-!TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance
-!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles.
-!TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile.
-!TP_ICM_TONECURVE;Tone curve
-!TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only available if the selected DCP has a tone curve.
-!TP_ICM_WORKING_TRC;Tone response curve:
-!TP_ICM_WORKING_TRC_CUSTOM;Custom
-!TP_ICM_WORKING_TRC_GAMMA;Gamma
-!TP_ICM_WORKING_TRC_NONE;None
-!TP_ICM_WORKING_TRC_SLOPE;Slope
-!TP_ICM_WORKING_TRC_TOOLTIP;Only for built-in profiles.
-!TP_IMPULSEDENOISE_LABEL;Impulse Noise Reduction
-!TP_IMPULSEDENOISE_THRESH;Threshold
-!TP_LABCURVE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_LABCURVE_AVOIDCOLORSHIFT_TOOLTIP;Fit colors into gamut of the working color space and apply Munsell correction.
-!TP_LABCURVE_BRIGHTNESS;Lightness
-!TP_LABCURVE_CHROMATICITY;Chromaticity
-!TP_LABCURVE_CHROMA_TOOLTIP;To apply B&W toning, set Chromaticity to -100.
-!TP_LABCURVE_CONTRAST;Contrast
-!TP_LABCURVE_CURVEEDITOR;Luminance Curve
-!TP_LABCURVE_CURVEEDITOR_A_RANGE1;Green Saturated
-!TP_LABCURVE_CURVEEDITOR_A_RANGE2;Green Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE3;Red Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE4;Red Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE1;Blue Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE2;Blue Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE3;Yellow Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE4;Yellow Saturated
-!TP_LABCURVE_CURVEEDITOR_CC;CC
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE1;Neutral
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE2;Dull
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE3;Pastel
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE4;Saturated
-!TP_LABCURVE_CURVEEDITOR_CC_TOOLTIP;Chromaticity according to chromaticity C=f(C)
-!TP_LABCURVE_CURVEEDITOR_CH;CH
-!TP_LABCURVE_CURVEEDITOR_CH_TOOLTIP;Chromaticity according to hue C=f(H)
-!TP_LABCURVE_CURVEEDITOR_CL;CL
-!TP_LABCURVE_CURVEEDITOR_CL_TOOLTIP;Chromaticity according to luminance C=f(L)
-!TP_LABCURVE_CURVEEDITOR_HH;HH
-!TP_LABCURVE_CURVEEDITOR_HH_TOOLTIP;Hue according to hue H=f(H)
-!TP_LABCURVE_CURVEEDITOR_LC;LC
-!TP_LABCURVE_CURVEEDITOR_LC_TOOLTIP;Luminance according to chromaticity L=f(C)
-!TP_LABCURVE_CURVEEDITOR_LH;LH
-!TP_LABCURVE_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H)
-!TP_LABCURVE_CURVEEDITOR_LL_TOOLTIP;Luminance according to luminance L=f(L)
-!TP_LABCURVE_LABEL;L*a*b* Adjustments
-!TP_LABCURVE_LCREDSK;Restrict LC to red and skin-tones
-!TP_LABCURVE_LCREDSK_TIP;If enabled, the LC Curve affects only red and skin-tones.\nIf disabled, it applies to all tones.
-!TP_LABCURVE_RSTPROTECTION;Red and skin-tones protection
-!TP_LABCURVE_RSTPRO_TOOLTIP;Works on the Chromaticity slider and the CC curve.
-!TP_LENSGEOM_AUTOCROP;Auto-Crop
-!TP_LENSGEOM_FILL;Auto-fill
-!TP_LENSGEOM_LABEL;Lens / Geometry
-!TP_LENSPROFILE_CORRECTION_AUTOMATCH;Automatically selected
-!TP_LENSPROFILE_CORRECTION_LCPFILE;LCP file
-!TP_LENSPROFILE_CORRECTION_MANUAL;Manually selected
-!TP_LENSPROFILE_LABEL;Profiled Lens Correction
-!TP_LENSPROFILE_LENS_WARNING;Warning: the crop factor used for lens profiling is larger than the crop factor of the camera, the results might be wrong.
-!TP_LENSPROFILE_MODE_HEADER;Lens Profile
-!TP_LENSPROFILE_USE_CA;Chromatic aberration
-!TP_LENSPROFILE_USE_GEOMETRIC;Geometric distortion
-!TP_LENSPROFILE_USE_HEADER;Correct
-!TP_LENSPROFILE_USE_VIGNETTING;Vignetting
-!TP_LOCALCONTRAST_AMOUNT;Amount
-!TP_LOCALCONTRAST_DARKNESS;Darkness level
-!TP_LOCALCONTRAST_LABEL;Local Contrast
-!TP_LOCALCONTRAST_LIGHTNESS;Lightness level
-!TP_LOCALCONTRAST_RADIUS;Radius
-!TP_METADATA_EDIT;Apply modifications
-!TP_METADATA_MODE;Metadata copy mode
-!TP_METADATA_STRIP;Strip all metadata
-!TP_METADATA_TUNNEL;Copy unchanged
-!TP_NEUTRAL;Reset
-!TP_NEUTRAL_TIP;Resets exposure sliders to neutral values.\nApplies to the same controls that Auto Levels applies to, regardless of whether you used Auto Levels or not.
-!TP_PCVIGNETTE_FEATHER;Feather
-!TP_PCVIGNETTE_FEATHER_TOOLTIP;Feathering:\n0 = corners only,\n50 = halfway to center,\n100 = to center.
-!TP_PCVIGNETTE_LABEL;Vignette Filter
-!TP_PCVIGNETTE_ROUNDNESS;Roundness
-!TP_PCVIGNETTE_ROUNDNESS_TOOLTIP;Roundness:\n0 = rectangle,\n50 = fitted ellipse,\n100 = circle.
-!TP_PCVIGNETTE_STRENGTH;Strength
-!TP_PCVIGNETTE_STRENGTH_TOOLTIP;Filter strength in stops (reached in corners).
-!TP_PERSPECTIVE_HORIZONTAL;Horizontal
-!TP_PERSPECTIVE_LABEL;Perspective
-!TP_PERSPECTIVE_VERTICAL;Vertical
-!TP_PFCURVE_CURVEEDITOR_CH;Hue
-!TP_PFCURVE_CURVEEDITOR_CH_TOOLTIP;Controls defringe strength by color.\nHigher = more,\nLower = less.
-!TP_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!TP_PREPROCESS_DEADPIXFILT_TOOLTIP;Tries to suppress dead pixels.
-!TP_PREPROCESS_GREENEQUIL;Green equilibration
-!TP_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!TP_PREPROCESS_HOTPIXFILT_TOOLTIP;Tries to suppress hot pixels.
-!TP_PREPROCESS_LABEL;Preprocessing
-!TP_PREPROCESS_LINEDENOISE;Line noise filter
-!TP_PREPROCESS_LINEDENOISE_DIRECTION;Direction
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_BOTH;Both
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_HORIZONTAL;Horizontal
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_PDAF_LINES;Horizontal only on PDAF rows
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_VERTICAL;Vertical
-!TP_PREPROCESS_NO_FOUND;None found
-!TP_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!TP_PRSHARPENING_LABEL;Post-Resize Sharpening
-!TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions.
-!TP_RAWCACORR_AUTO;Auto-correction
-!TP_RAWCACORR_AUTOIT;Iterations
-!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
-!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CABLUE;Blue
-!TP_RAWCACORR_CARED;Red
-!TP_RAWCACORR_CASTR;Strength
-!TP_RAWEXPOS_BLACKS;Black Levels
-!TP_RAWEXPOS_BLACK_0;Green 1 (lead)
-!TP_RAWEXPOS_BLACK_1;Red
-!TP_RAWEXPOS_BLACK_2;Blue
-!TP_RAWEXPOS_BLACK_3;Green 2
-!TP_RAWEXPOS_BLACK_BLUE;Blue
-!TP_RAWEXPOS_BLACK_GREEN;Green
-!TP_RAWEXPOS_BLACK_RED;Red
-!TP_RAWEXPOS_LINEAR;White-point correction
-!TP_RAWEXPOS_RGB;Red, Green, Blue
-!TP_RAWEXPOS_TWOGREEN;Link greens
-!TP_RAW_1PASSMEDIUM;1-pass (Markesteijn)
-!TP_RAW_2PASS;1-pass+fast
-!TP_RAW_3PASSBEST;3-pass (Markesteijn)
-!TP_RAW_4PASS;3-pass+fast
-!TP_RAW_AHD;AHD
-!TP_RAW_AMAZE;AMaZE
-!TP_RAW_AMAZEVNG4;AMaZE+VNG4
-!TP_RAW_BORDER;Border
-!TP_RAW_DCB;DCB
-!TP_RAW_DCBENHANCE;DCB enhancement
-!TP_RAW_DCBITERATIONS;Number of DCB iterations
-!TP_RAW_DCBVNG4;DCB+VNG4
-!TP_RAW_DMETHOD_PROGRESSBAR;%1 demosaicing...
-!TP_RAW_DMETHOD_PROGRESSBAR_REFINE;Demosaicing refinement...
-!TP_RAW_DMETHOD_TOOLTIP;Note: IGV and LMMSE are dedicated to high ISO images to aid in noise reduction without leading to maze patterns, posterization or a washed-out look.\nPixel Shift is for Pentax/Sony Pixel Shift files. It falls back to AMaZE for non-Pixel Shift files.
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST;Auto threshold
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST_TOOLTIP;If the checkbox is checked (recommended), RawTherapee calculates an optimum value based on flat regions in the image.\nIf there is no flat region in the image or the image is too noisy, the value will be set to 0.\nTo set the value manually, uncheck the checkbox first (reasonable values depend on the image).
-!TP_RAW_DUALDEMOSAICCONTRAST;Contrast threshold
-!TP_RAW_EAHD;EAHD
-!TP_RAW_FAST;Fast
-!TP_RAW_HD;Threshold
-!TP_RAW_HD_TOOLTIP;Lower values make hot/dead pixel detection more aggressive, but false positives may lead to artifacts. If you notice any artifacts appearing when enabling the Hot/Dead Pixel Filters, gradually increase the threshold value until they disappear.
-!TP_RAW_HPHD;HPHD
-!TP_RAW_IGV;IGV
-!TP_RAW_IMAGENUM;Sub-image
-!TP_RAW_IMAGENUM_SN;SN mode
-!TP_RAW_IMAGENUM_TOOLTIP;Some raw files consist of several sub-images (Pentax/Sony Pixel Shift, Pentax 3-in-1 HDR, Canon Dual Pixel, Fuji EXR).\n\nWhen using any demosaicing method other than Pixel Shift, this selects which sub-image is used.\n\nWhen using the Pixel Shift demosaicing method on a Pixel Shift raw, all sub-images are used, and this selects which sub-image should be used for moving parts.
-!TP_RAW_LABEL;Demosaicing
-!TP_RAW_LMMSE;LMMSE
-!TP_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!TP_RAW_LMMSE_TOOLTIP;Adds gamma (step 1), median (steps 2-4) and refinement (steps 5-6) to reduce artifacts and improve the signal-to-noise ratio.
-!TP_RAW_MONO;Mono
-!TP_RAW_NONE;None (Shows sensor pattern)
-!TP_RAW_PIXELSHIFT;Pixel Shift
-!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
-!TP_RAW_PIXELSHIFTDMETHOD;Demosaic method for motion
-!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
-!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
-!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
-!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
-!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
-!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
-!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
-!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
-!TP_RAW_PIXELSHIFTMM_OFF;Off
-!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
-!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
-!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
-!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
-!TP_RAW_PIXELSHIFTSIGMA;Blur radius
-!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
-!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
-!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
-!TP_RAW_RCD;RCD
-!TP_RAW_RCDVNG4;RCD+VNG4
-!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
-!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.\n+fast gives less artifacts in flat areas
-!TP_RAW_SENSOR_XTRANS_LABEL;Sensor with X-Trans Matrix
-!TP_RAW_VNG4;VNG4
-!TP_RAW_XTRANS;X-Trans
-!TP_RAW_XTRANSFAST;Fast X-Trans
-!TP_RESIZE_ALLOW_UPSCALING;Allow Upscaling
-!TP_RESIZE_APPLIESTO;Applies to:
-!TP_RESIZE_CROPPEDAREA;Cropped Area
-!TP_RESIZE_FITBOX;Bounding Box
-!TP_RESIZE_FULLIMAGE;Full Image
-!TP_RESIZE_HEIGHT;Height
-!TP_RESIZE_LANCZOS;Lanczos
-!TP_RESIZE_SPECIFY;Specify:
-!TP_RESIZE_WIDTH;Width
-!TP_RETINEX_CONTEDIT_HSL;HSL histogram
-!TP_RETINEX_CONTEDIT_LAB;L*a*b* histogram
-!TP_RETINEX_CONTEDIT_LH;Hue
-!TP_RETINEX_CONTEDIT_MAP;Equalizer
-!TP_RETINEX_CURVEEDITOR_CD;L=f(L)
-!TP_RETINEX_CURVEEDITOR_CD_TOOLTIP;Luminance according to luminance L=f(L)\nCorrect raw data to reduce halos and artifacts.
-!TP_RETINEX_CURVEEDITOR_LH;Strength=f(H)
-!TP_RETINEX_CURVEEDITOR_LH_TOOLTIP;Strength according to hue Strength=f(H)\nThis curve also acts on chroma when using the "Highlight" retinex method.
-!TP_RETINEX_CURVEEDITOR_MAP;L=f(L)
-!TP_RETINEX_CURVEEDITOR_MAP_TOOLTIP;This curve can be applied alone or with a Gaussian mask or wavelet mask.\nBeware of artifacts!
-!TP_RETINEX_EQUAL;Equalizer
-!TP_RETINEX_FREEGAMMA;Free gamma
-!TP_RETINEX_GAIN;Gain
-!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
-!TP_RETINEX_GAINTRANSMISSION;Gain transmission
-!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
-!TP_RETINEX_GAMMA;Gamma
-!TP_RETINEX_GAMMA_FREE;Free
-!TP_RETINEX_GAMMA_HIGH;High
-!TP_RETINEX_GAMMA_LOW;Low
-!TP_RETINEX_GAMMA_MID;Middle
-!TP_RETINEX_GAMMA_NONE;None
-!TP_RETINEX_GAMMA_TOOLTIP;Restore tones by applying gamma before and after Retinex. Different from Retinex curves or others curves (Lab, Exposure, etc.).
-!TP_RETINEX_GRAD;Transmission gradient
-!TP_RETINEX_GRADS;Strength gradient
-!TP_RETINEX_GRADS_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Strength is reduced when iterations increase, and conversely.
-!TP_RETINEX_GRAD_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Variance and Threshold are reduced when iterations increase, and conversely.
-!TP_RETINEX_HIGH;High
-!TP_RETINEX_HIGHLIG;Highlight
-!TP_RETINEX_HIGHLIGHT;Highlight threshold
-!TP_RETINEX_HIGHLIGHT_TOOLTIP;Increase action of High algorithm.\nMay require you to re-adjust "Neighboring pixels" and to increase the "White-point correction" in the Raw tab -> Raw White Points tool.
-!TP_RETINEX_HSLSPACE_LIN;HSL-Linear
-!TP_RETINEX_HSLSPACE_LOG;HSL-Logarithmic
-!TP_RETINEX_ITER;Iterations (Tone-mapping)
-!TP_RETINEX_ITERF;Tone mapping
-!TP_RETINEX_ITER_TOOLTIP;Simulate a tone-mapping operator.\nHigh values increase the processing time.
-!TP_RETINEX_LABEL;Retinex
-!TP_RETINEX_LABEL_MASK;Mask
-!TP_RETINEX_LABSPACE;L*a*b*
-!TP_RETINEX_LOW;Low
-!TP_RETINEX_MAP;Method
-!TP_RETINEX_MAP_GAUS;Gaussian mask
-!TP_RETINEX_MAP_MAPP;Sharp mask (wavelet partial)
-!TP_RETINEX_MAP_MAPT;Sharp mask (wavelet total)
-!TP_RETINEX_MAP_METHOD_TOOLTIP;Use the mask generated by the Gaussian function above (Radius, Method) to reduce halos and artifacts.\n\nCurve only: apply a diagonal contrast curve on the mask.\nBeware of artifacts!\n\nGaussian mask: generate and use a Gaussian blur of the original mask.\nQuick.\n\nSharp mask: generate and use a wavelet on the original mask.\nSlow.
-!TP_RETINEX_MAP_NONE;None
-!TP_RETINEX_MEDIAN;Transmission median filter
-!TP_RETINEX_METHOD;Method
-!TP_RETINEX_METHOD_TOOLTIP;Low = Reinforce low light.\nUniform = Equalize action.\nHigh = Reinforce high light.\nHighlights = Remove magenta in highlights.
-!TP_RETINEX_MLABEL;Restored haze-free Min=%1 Max=%2
-!TP_RETINEX_MLABEL_TOOLTIP;Should be near min=0 max=32768\nRestored image with no mixture.
-!TP_RETINEX_NEIGHBOR;Radius
-!TP_RETINEX_NEUTRAL;Reset
-!TP_RETINEX_NEUTRAL_TIP;Reset all sliders and curves to their default values.
-!TP_RETINEX_OFFSET;Offset (brightness)
-!TP_RETINEX_SCALES;Gaussian gradient
-!TP_RETINEX_SCALES_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Scale and radius are reduced when iterations increase, and conversely.
-!TP_RETINEX_SETTINGS;Settings
-!TP_RETINEX_SKAL;Scale
-!TP_RETINEX_SLOPE;Free gamma slope
-!TP_RETINEX_STRENGTH;Strength
-!TP_RETINEX_THRESHOLD;Threshold
-!TP_RETINEX_THRESHOLD_TOOLTIP;Limits in/out.\nIn = image source,\nOut = image gauss.
-!TP_RETINEX_TLABEL;TM Min=%1 Max=%2 Mean=%3 Sigma=%4
-!TP_RETINEX_TLABEL2;TM Tm=%1 TM=%2
-!TP_RETINEX_TLABEL_TOOLTIP;Transmission map result.\nMin and Max are used by Variance.\nMean and Sigma.\nTm=Min TM=Max of transmission map.
-!TP_RETINEX_TRANF;Transmission
-!TP_RETINEX_TRANSMISSION;Transmission map
-!TP_RETINEX_TRANSMISSION_TOOLTIP;Transmission according to transmission.\nAbscissa: transmission from negative values (min), mean, and positives values (max).\nOrdinate: amplification or reduction.
-!TP_RETINEX_UNIFORM;Uniform
-!TP_RETINEX_VARIANCE;Contrast
-!TP_RETINEX_VARIANCE_TOOLTIP;Low variance increase local contrast and saturation, but can lead to artifacts.
-!TP_RETINEX_VIEW;Process
-!TP_RETINEX_VIEW_MASK;Mask
-!TP_RETINEX_VIEW_METHOD_TOOLTIP;Standard - Normal display.\nMask - Displays the mask.\nUnsharp mask - Displays the image with a high radius unsharp mask.\nTransmission - Auto/Fixed - Displays the file transmission-map, before any action on contrast and brightness.\n\nAttention: the mask does not correspond to reality, but is amplified to make it more visible.
-!TP_RETINEX_VIEW_NONE;Standard
-!TP_RETINEX_VIEW_TRAN;Transmission - Auto
-!TP_RETINEX_VIEW_TRAN2;Transmission - Fixed
-!TP_RETINEX_VIEW_UNSHARP;Unsharp mask
-!TP_RGBCURVES_BLUE;B
-!TP_RGBCURVES_CHANNEL;Channel
-!TP_RGBCURVES_GREEN;G
-!TP_RGBCURVES_LABEL;RGB Curves
-!TP_RGBCURVES_LUMAMODE;Luminosity mode
-!TP_RGBCURVES_LUMAMODE_TOOLTIP;Luminosity mode allows to vary the contribution of R, G and B channels to the luminosity of the image, without altering image color.
-!TP_RGBCURVES_RED;R
-!TP_SAVEDIALOG_OK_TIP;Shortcut: Ctrl-Enter
-!TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
-!TP_SHARPENEDGE_AMOUNT;Quantity
-!TP_SHARPENEDGE_LABEL;Edges
-!TP_SHARPENEDGE_PASSES;Iterations
-!TP_SHARPENEDGE_THREE;Luminance only
-!TP_SHARPENING_BLUR;Blur radius
-!TP_SHARPENING_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_AMOUNT;Quantity
-!TP_SHARPENMICRO_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_LABEL;Microcontrast
-!TP_SHARPENMICRO_MATRIX;3×3 matrix instead of 5×5
-!TP_SHARPENMICRO_UNIFORMITY;Uniformity
-!TP_SOFTLIGHT_LABEL;Soft Light
-!TP_SOFTLIGHT_STRENGTH;Strength
-!TP_TM_FATTAL_AMOUNT;Amount
-!TP_TM_FATTAL_ANCHOR;Anchor
-!TP_TM_FATTAL_LABEL;Dynamic Range Compression
-!TP_TM_FATTAL_THRESHOLD;Detail
-!TP_VIBRANCE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES;HH
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_LABEL;Skin-tones
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE1;Red/Purple
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE2;Red
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE3;Red/Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE4;Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_TOOLTIP;Hue according to hue H=f(H)
-!TP_VIBRANCE_LABEL;Vibrance
-!TP_VIBRANCE_PASTELS;Pastel Tones
-!TP_VIBRANCE_PASTSATTOG;Link pastel and saturated tones
-!TP_VIBRANCE_PROTECTSKINS;Protect skin-tones
-!TP_VIBRANCE_PSTHRESHOLD;Pastel/saturated tones threshold
-!TP_VIBRANCE_PSTHRESHOLD_SATTHRESH;Saturation threshold
-!TP_VIBRANCE_PSTHRESHOLD_TOOLTIP;The vertical axis represents pastel tones at the bottom and saturated tones at the top.\nThe horizontal axis represents the saturation range.
-!TP_VIBRANCE_PSTHRESHOLD_WEIGTHING;Pastel/saturated transition's weighting
-!TP_VIBRANCE_SATURATED;Saturated Tones
-!TP_VIGNETTING_CENTER;Center
-!TP_VIGNETTING_CENTER_X;Center X
-!TP_VIGNETTING_CENTER_Y;Center Y
-!TP_VIGNETTING_STRENGTH;Strength
-!TP_WAVELET_1;Level 1
-!TP_WAVELET_2;Level 2
-!TP_WAVELET_3;Level 3
-!TP_WAVELET_4;Level 4
-!TP_WAVELET_5;Level 5
-!TP_WAVELET_6;Level 6
-!TP_WAVELET_7;Level 7
-!TP_WAVELET_8;Level 8
-!TP_WAVELET_9;Level 9
-!TP_WAVELET_APPLYTO;Apply To
-!TP_WAVELET_AVOID;Avoid color shift
-!TP_WAVELET_B0;Black
-!TP_WAVELET_B1;Grey
-!TP_WAVELET_B2;Residual
-!TP_WAVELET_BACKGROUND;Background
-!TP_WAVELET_BACUR;Curve
-!TP_WAVELET_BALANCE;Contrast balance d/v-h
-!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified.
-!TP_WAVELET_BALCHRO;Chroma balance
-!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance.
-!TP_WAVELET_BANONE;None
-!TP_WAVELET_BASLI;Slider
-!TP_WAVELET_BATYPE;Contrast balance method
-!TP_WAVELET_CBENAB;Toning and Color Balance
-!TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted
-!TP_WAVELET_CCURVE;Local contrast
-!TP_WAVELET_CH1;Whole chroma range
-!TP_WAVELET_CH2;Saturated/pastel
-!TP_WAVELET_CH3;Link contrast levels
-!TP_WAVELET_CHCU;Curve
-!TP_WAVELET_CHR;Chroma-contrast link strength
-!TP_WAVELET_CHRO;Saturated/pastel threshold
-!TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored.
-!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength"
-!TP_WAVELET_CHSL;Sliders
-!TP_WAVELET_CHTYPE;Chrominance method
-!TP_WAVELET_COLORT;Opacity Red-Green
-!TP_WAVELET_COMPCONT;Contrast
-!TP_WAVELET_COMPGAMMA;Compression gamma
-!TP_WAVELET_COMPGAMMA_TOOLTIP;Adjusting the gamma of the residual image allows you to equilibrate the data and histogram.
-!TP_WAVELET_COMPTM;Tone mapping
-!TP_WAVELET_CONTEDIT;'After' contrast curve
-!TP_WAVELET_CONTR;Gamut
-!TP_WAVELET_CONTRA;Contrast
-!TP_WAVELET_CONTRAST_MINUS;Contrast -
-!TP_WAVELET_CONTRAST_PLUS;Contrast +
-!TP_WAVELET_CONTRA_TOOLTIP;Changes contrast of the residual image.
-!TP_WAVELET_CTYPE;Chrominance control
-!TP_WAVELET_CURVEEDITOR_CC_TOOLTIP;Modifies local contrast as a function of the original local contrast (abscissa).\nLow abscissa values represent small local contrast (real values about 10..20).\n50% abscissa represents average local contrast (real value about 100..300).\n66% abscissa represents standard deviation of local contrast (real value about 300..800).\n100% abscissa represents maximum local contrast (real value about 3000..8000).
-!TP_WAVELET_CURVEEDITOR_CH;Contrast levels=f(Hue)
-!TP_WAVELET_CURVEEDITOR_CH_TOOLTIP;Modifies each level's contrast as a function of hue.\nTake care not to overwrite changes made with the Gamut sub-tool's hue controls.\nThe curve will only have an effect when wavelet contrast level sliders are non-zero.
-!TP_WAVELET_CURVEEDITOR_CL;L
-!TP_WAVELET_CURVEEDITOR_CL_TOOLTIP;Applies a final contrast luminance curve at the end of the wavelet treatment.
-!TP_WAVELET_CURVEEDITOR_HH;HH
-!TP_WAVELET_CURVEEDITOR_HH_TOOLTIP;Modifies the residual image's hue as a function of hue.
-!TP_WAVELET_DALL;All directions
-!TP_WAVELET_DAUB;Edge performance
-!TP_WAVELET_DAUB2;D2 - low
-!TP_WAVELET_DAUB4;D4 - standard
-!TP_WAVELET_DAUB6;D6 - standard plus
-!TP_WAVELET_DAUB10;D10 - medium
-!TP_WAVELET_DAUB14;D14 - high
-!TP_WAVELET_DAUB_TOOLTIP;Changes Daubechies coefficients:\nD4 = Standard,\nD14 = Often best performance, 10% more time-intensive.\n\nAffects edge detection as well as the general quality of the firsts levels. However the quality is not strictly related to this coefficient and can vary with images and uses.
-!TP_WAVELET_DONE;Vertical
-!TP_WAVELET_DTHR;Diagonal
-!TP_WAVELET_DTWO;Horizontal
-!TP_WAVELET_EDCU;Curve
-!TP_WAVELET_EDGCONT;Local contrast
-!TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, top-left, top-right and bottom-right represent respectively local contrast for low values, mean, mean+stdev and maxima.
-!TP_WAVELET_EDGE;Edge Sharpness
-!TP_WAVELET_EDGEAMPLI;Base amplification
-!TP_WAVELET_EDGEDETECT;Gradient sensitivity
-!TP_WAVELET_EDGEDETECTTHR;Threshold low (noise)
-!TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection)
-!TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky.
-!TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise.
-!TP_WAVELET_EDGESENSI;Edge sensitivity
-!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
-!TP_WAVELET_EDGTHRESH;Detail
-!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
-!TP_WAVELET_EDRAD;Radius
-!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
-!TP_WAVELET_EDSL;Threshold Sliders
-!TP_WAVELET_EDTYPE;Local contrast method
-!TP_WAVELET_EDVAL;Strength
-!TP_WAVELET_FINAL;Final Touchup
-!TP_WAVELET_FINEST;Finest
-!TP_WAVELET_HIGHLIGHT;Highlight luminance range
-!TP_WAVELET_HS1;Whole luminance range
-!TP_WAVELET_HS2;Shadows/Highlights
-!TP_WAVELET_HUESKIN;Skin hue
-!TP_WAVELET_HUESKIN_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_HUESKY;Sky hue
-!TP_WAVELET_HUESKY_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_ITER;Delta balance levels
-!TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels.
-!TP_WAVELET_LABEL;Wavelet Levels
-!TP_WAVELET_LARGEST;Coarsest
-!TP_WAVELET_LEVCH;Chroma
-!TP_WAVELET_LEVDIR_ALL;All levels in all directions
-!TP_WAVELET_LEVDIR_INF;Below or equal the level
-!TP_WAVELET_LEVDIR_ONE;One level
-!TP_WAVELET_LEVDIR_SUP;Above the level
-!TP_WAVELET_LEVELS;Wavelet levels
-!TP_WAVELET_LEVELS_TOOLTIP;Choose the number of detail levels the image is to be decomposed into. More levels require more RAM and require a longer processing time.
-!TP_WAVELET_LEVF;Contrast
-!TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1
-!TP_WAVELET_LEVONE;Level 2
-!TP_WAVELET_LEVTHRE;Level 4
-!TP_WAVELET_LEVTWO;Level 3
-!TP_WAVELET_LEVZERO;Level 1
-!TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength
-!TP_WAVELET_LIPST;Enhanced algoritm
-!TP_WAVELET_LOWLIGHT;Shadow luminance range
-!TP_WAVELET_MEDGREINF;First level
-!TP_WAVELET_MEDI;Reduce artifacts in blue sky
-!TP_WAVELET_MEDILEV;Edge detection
-!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine.
-!TP_WAVELET_NEUTRAL;Neutral
-!TP_WAVELET_NOIS;Denoise
-!TP_WAVELET_NOISE;Denoise and Refine
-!TP_WAVELET_NPHIGH;High
-!TP_WAVELET_NPLOW;Low
-!TP_WAVELET_NPNONE;None
-!TP_WAVELET_NPTYPE;Neighboring pixels
-!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced.
-!TP_WAVELET_OPACITY;Opacity Blue-Yellow
-!TP_WAVELET_OPACITYW;Contrast balance d/v-h curve
-!TP_WAVELET_OPACITYWL;Final local contrast
-!TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right.
-!TP_WAVELET_PASTEL;Pastel chroma
-!TP_WAVELET_PROC;Process
-!TP_WAVELET_RE1;Reinforced
-!TP_WAVELET_RE2;Unchanged
-!TP_WAVELET_RE3;Reduced
-!TP_WAVELET_RESCHRO;Chroma
-!TP_WAVELET_RESCON;Shadows
-!TP_WAVELET_RESCONH;Highlights
-!TP_WAVELET_RESID;Residual Image
-!TP_WAVELET_SAT;Saturated chroma
-!TP_WAVELET_SETTINGS;Wavelet Settings
-!TP_WAVELET_SKIN;Skin targetting/protection
-!TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_WAVELET_SKY;Sky targetting/protection
-!TP_WAVELET_SKY_TOOLTIP;At -100 sky-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 sky-tones are protected while all other tones are affected.
-!TP_WAVELET_STREN;Strength
-!TP_WAVELET_STRENGTH;Strength
-!TP_WAVELET_SUPE;Extra
-!TP_WAVELET_THR;Shadows threshold
-!TP_WAVELET_THRESHOLD;Highlight levels
-!TP_WAVELET_THRESHOLD2;Shadow levels
-!TP_WAVELET_THRESHOLD2_TOOLTIP;Only levels between 9 and 9 minus the value will be affected by the shadow luminance range. Other levels will be fully treated. The highest level possible is limited by the highlight level value (9 minus highlight level value).
-!TP_WAVELET_THRESHOLD_TOOLTIP;Only levels beyond the chosen value will be affected by the highlight luminance range. Other levels will be fully treated. The chosen value here limits the highest possible value of the shadow levels.
-!TP_WAVELET_THRH;Highlights threshold
-!TP_WAVELET_TILESBIG;Big tiles
-!TP_WAVELET_TILESFULL;Full image
-!TP_WAVELET_TILESIZE;Tiling method
-!TP_WAVELET_TILESLIT;Little tiles
-!TP_WAVELET_TILES_TOOLTIP;Processing the full image leads to better quality and is the recommended option, while using tiles is a fall-back solution for users with little RAM. Refer to RawPedia for memory requirements.
-!TP_WAVELET_TMSTRENGTH;Compression strength
-!TP_WAVELET_TMSTRENGTH_TOOLTIP;Control the strength of tone mapping or contrast compression of the residual image. When the value is different from 0, the Strength and Gamma sliders of the Tone Mapping tool in the Exposure tab will become grayed out.
-!TP_WAVELET_TMTYPE;Compression method
-!TP_WAVELET_TON;Toning
-!TP_WBALANCE_CLOUDY;Cloudy
-!TP_WBALANCE_DAYLIGHT;Daylight (sunny)
-!TP_WBALANCE_EQBLUERED;Blue/Red equalizer
-!TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behavior of "white balance" by modulating the blue/red balance.\nThis can be useful when shooting conditions:\na) are far from the standard illuminant (e.g. underwater),\nb) are far from conditions where calibrations were performed,\nc) where the matrices or ICC profiles are unsuitable.
-!TP_WBALANCE_FLASH55;Leica
-!TP_WBALANCE_FLASH60;Standard, Canon, Pentax, Olympus
-!TP_WBALANCE_FLASH65;Nikon, Panasonic, Sony, Minolta
-!TP_WBALANCE_FLASH_HEADER;Flash
-!TP_WBALANCE_FLUO1;F1 - Daylight
-!TP_WBALANCE_FLUO2;F2 - Cool White
-!TP_WBALANCE_FLUO3;F3 - White
-!TP_WBALANCE_FLUO4;F4 - Warm White
-!TP_WBALANCE_FLUO5;F5 - Daylight
-!TP_WBALANCE_FLUO6;F6 - Lite White
-!TP_WBALANCE_FLUO7;F7 - D65 Daylight Simulator
-!TP_WBALANCE_FLUO8;F8 - D50 / Sylvania F40 Design
-!TP_WBALANCE_FLUO9;F9 - Cool White Deluxe
-!TP_WBALANCE_FLUO10;F10 - Philips TL85
-!TP_WBALANCE_FLUO11;F11 - Philips TL84
-!TP_WBALANCE_FLUO12;F12 - Philips TL83
-!TP_WBALANCE_FLUO_HEADER;Fluorescent
-!TP_WBALANCE_GTI;GTI
-!TP_WBALANCE_HMI;HMI
-!TP_WBALANCE_JUDGEIII;JudgeIII
-!TP_WBALANCE_LAMP_HEADER;Lamp
-!TP_WBALANCE_LED_CRS;CRS SP12 WWMR16
-!TP_WBALANCE_LED_HEADER;LED
-!TP_WBALANCE_LED_LSI;LSI Lumelex 2040
-!TP_WBALANCE_PICKER;Pick
-!TP_WBALANCE_SHADE;Shade
-!TP_WBALANCE_SOLUX35;Solux 3500K
-!TP_WBALANCE_SOLUX41;Solux 4100K
-!TP_WBALANCE_SOLUX47;Solux 4700K (vendor)
-!TP_WBALANCE_SOLUX47_NG;Solux 4700K (Nat. Gallery)
-!TP_WBALANCE_TEMPBIAS;AWB temperature bias
-!TP_WBALANCE_TEMPBIAS_TOOLTIP;Allows to alter the computation of the "auto white balance"\nby biasing it towards warmer or cooler temperatures. The bias\nis expressed as a percentage of the computed temperature,\nso that the result is given by "computedTemp + computedTemp * bias".
-!TP_WBALANCE_TUNGSTEN;Tungsten
-!TP_WBALANCE_WATER1;UnderWater 1
-!TP_WBALANCE_WATER2;UnderWater 2
-!TP_WBALANCE_WATER_HEADER;UnderWater
-!ZOOMPANEL_100;(100%)
-!ZOOMPANEL_NEWCROPWINDOW;Open (new) detail window
-!ZOOMPANEL_ZOOM100;Zoom to 100%\nShortcut: z
-!ZOOMPANEL_ZOOMFITCROPSCREEN;Fit crop to screen\nShortcut: f
-!ZOOMPANEL_ZOOMFITSCREEN;Fit whole image to screen\nShortcut: Alt-f
-!ZOOMPANEL_ZOOMIN;Zoom In\nShortcut: +
-!ZOOMPANEL_ZOOMOUT;Zoom Out\nShortcut: -
diff --git a/rtdata/languages/Swedish b/rtdata/languages/Swedish
index 27fa8a221..9805f531b 100644
--- a/rtdata/languages/Swedish
+++ b/rtdata/languages/Swedish
@@ -77,7 +77,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Förbigå förbättringssteg för LMMSE (För
EXPORT_BYPASS_SHARPENEDGE;Förbigå kantskärpning
EXPORT_BYPASS_SHARPENING;Förbigå skärpning
EXPORT_BYPASS_SHARPENMICRO;Förbigå mikrokontrast
-EXPORT_BYPASS_SH_HQ;Förbigå skuggor/högdagrar (hög kvalitet)
EXPORT_FASTEXPORTOPTIONS;Inställningar för snabbexport
EXPORT_INSTRUCTIONS;Snabbexport erbjuder snabbare konvertering genom att åsidosätta tidskrävande verktyg och framkallningsinställningar. Batchkön körs då med dessa, mindre krävande, inställningar istället så länge det här alternativet är valt. Den här metoden rekommenderas för de konverteringar där användningsområdet tillåter en lägre kvalitet på de färdiga bilderna. Genom att använda det här alternativet görs inga modifieringar i bildens normala framkallningsinställningar.
EXPORT_MAXHEIGHT;Maximal höjd:
@@ -86,7 +85,6 @@ EXPORT_PUTTOQUEUEFAST; Lägg till i kö för snabbexport
EXPORT_RAW_DMETHOD;Demosaic-metod
EXTPROGTARGET_1;Rå
EXTPROGTARGET_2;köhanterad
-FILEBROWSER_ADDDELTEMPLATE;Lägg till/ta bort förinställningar...
FILEBROWSER_APPLYPROFILE;Använd profil
FILEBROWSER_APPLYPROFILE_PARTIAL;Applicera profil (partiell)
FILEBROWSER_AUTODARKFRAME;Automatisk svartbild
@@ -212,7 +210,6 @@ GENERAL_WARNING;Varning
HISTOGRAM_TOOLTIP_B;Visa/dölj blått histogram
HISTOGRAM_TOOLTIP_BAR;Visa/dölj RBG-indikatorer\nKlicka på höger musknapp på förhandsvisningen för att frysa
HISTOGRAM_TOOLTIP_CHRO;Visa/Dölj kromananshistogrammet
-HISTOGRAM_TOOLTIP_FULL;Växla mellan fullt eller skalat histogram
HISTOGRAM_TOOLTIP_G;Visa/dölj grönt histogram
HISTOGRAM_TOOLTIP_L;Visa/dölj CIELAB histogram för luminans
HISTOGRAM_TOOLTIP_R;Visa/dölj rött histogram
@@ -705,8 +702,6 @@ MAIN_TAB_RAW;Råbild
MAIN_TAB_RAW_TOOLTIP;Kortkommando: Alt-r
MAIN_TAB_TRANSFORM;Omvandla
MAIN_TAB_TRANSFORM_TOOLTIP;Kortkommando: Alt-t
-MAIN_TAB_WAVELET;Wavelet
-MAIN_TAB_WAVELET_TOOLTIP;Kortkommando: Alt-w
MAIN_TOOLTIP_BACKCOLOR0;Bakgrundsfärg: Temabaserad\nKortkommando: 9
MAIN_TOOLTIP_BACKCOLOR1;Bakgrundsfärg: Svart\nKortkommando: 9
MAIN_TOOLTIP_BACKCOLOR2;Bakgrundsfärg: Vit\nKortkommando: 9
@@ -801,7 +796,6 @@ PARTIALPASTE_SHARPENING;Skärpa (Oskarp mask/RL)
PARTIALPASTE_SHARPENMICRO;Mikrokontrast
PARTIALPASTE_VIBRANCE;Lyster
PARTIALPASTE_VIGNETTING;Reducera vinjettering
-PARTIALPASTE_WAVELETGROUP;Wavelet-nivåer
PARTIALPASTE_WHITEBALANCE;Vitbalans
PREFERENCES_ADD;Lägg till
PREFERENCES_APPEARANCE_NAVGUIDECOLOR;Översiktsvyns guidefärg
@@ -813,7 +807,6 @@ PREFERENCES_BEHADDALLHINT;Sätt alla parametrar till Lägg till-läge.\nF
PREFERENCES_BEHAVIOR;Uppträdande
PREFERENCES_BEHSETALL;Sätt allt till 'Ange'
PREFERENCES_BEHSETALLHINT;Sätt alla parametrar till Ange-läge.\nFörändringar i parametrar i batch-verktyget kommer att vara absoluta och de faktiska värdena kommer att visas.
-PREFERENCES_BLACKBODY;Glödlampa
PREFERENCES_CACHEMAXENTRIES;Maximalt antal cachefiler
PREFERENCES_CACHEOPTS;Cacheinställningar
PREFERENCES_CACHETHUMBHEIGHT;Maximal höjd på miniatyrbilderna
@@ -832,10 +825,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Format för nycklar
PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Namn
PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
PREFERENCES_CUSTPROFBUILDPATH;Exekverbar sökväg
-PREFERENCES_D50;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
PREFERENCES_DARKFRAMEFOUND;Hittade
PREFERENCES_DARKFRAMESHOTS;bilder
PREFERENCES_DARKFRAMETEMPLATES;mallar
@@ -855,31 +844,15 @@ PREFERENCES_FLATFIELDFOUND;Hittade
PREFERENCES_FLATFIELDSDIR;Plattfältskatalog
PREFERENCES_FLATFIELDSHOTS;bilder
PREFERENCES_FLATFIELDTEMPLATES;mallar
-PREFERENCES_FLUOF2;Lysrör F2
-PREFERENCES_FLUOF7;Lysrör F7
-PREFERENCES_FLUOF11;Lysrör F11
PREFERENCES_FORIMAGE;För bildfiler
PREFERENCES_FORRAW;För råbilder
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Samma miniatyrbildshöjd mellan redigerings- och filvyn
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Att ha olika miniatyrbildshöjder kräver ytterligare beräkningskraft varje gång du växlar mellan redigerings- och filvyn.
PREFERENCES_GIMPPATH;Installationskatalog för GIMP
-PREFERENCES_GREY;Utenhetens Yb luminans (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;Vyns Yb luminans (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;Automatisk
PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogrammet till vänster
-PREFERENCES_HISTOGRAMWORKING;Använd arbetsprofil för huvudhistogram och översiktsvyn.
PREFERENCES_HISTOGRAM_TOOLTIP;Om påslagen, så används arbetsprofilen för att skapa huvudhistogrammet och översiktsvyn, annars används den gamma-korrigerade profilen istället.
PREFERENCES_HLTHRESHOLD;Tröskelvärde för högdagrar
PREFERENCES_ICCDIR;Katalog för färgprofiler
-PREFERENCES_IMG_RELOAD_NEEDED;De här förändringarna kräver att bilden laddas om (eller att en ny bild öppnas) för att effektueras.
PREFERENCES_IMPROCPARAMS;Standardprofiler
PREFERENCES_INSPECT_LABEL;Inspektion
PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximalt antal cachade bilder
@@ -896,7 +869,6 @@ PREFERENCES_MENUGROUPLABEL;Visa "Etikett"
PREFERENCES_MENUGROUPPROFILEOPERATIONS;Visa "Profilaktiviteter"
PREFERENCES_MENUGROUPRANK;Visa "Betygsättning"
PREFERENCES_MENUOPTIONS;Menyval för högerklick
-PREFERENCES_METADATA;Metadata
PREFERENCES_MULTITAB;Öppna bilderna i olika flikar
PREFERENCES_MULTITABDUALMON;Visa bild på andra skärmen, om möjligt, i flerfliksläge
PREFERENCES_NAVIGATIONFRAME;Navigering
@@ -953,9 +925,7 @@ PREFERENCES_TAB_IMPROC;Bildbehandling
PREFERENCES_TAB_SOUND;Ljud
PREFERENCES_TP_LABEL;Verktygspanel:
PREFERENCES_TP_VSCROLLBAR;Göm verktygpanelens vertikala skrollist
-PREFERENCES_TUNNELMETADATA;Kopiera Exif/IPTC/XMP till utfilen oförändrat
PREFERENCES_USEBUNDLEDPROFILES;Visa förinstallerade profiler
-PREFERENCES_VIEW;Utenhetens vitbalansvärde (datorskärm, TV, bildkanon, etc.)
PREFERENCES_WORKFLOW;Arbetsflöde
PROFILEPANEL_COPYPPASTE;Parametrar att kopiera
PROFILEPANEL_GLOBALPROFILES;Förinstallerade profiler
@@ -995,7 +965,6 @@ SAVEDLG_AUTOSUFFIX;Lägg automatiskt till en ändelse om filnamnet redan exister
SAVEDLG_FILEFORMAT;Filformat
SAVEDLG_FORCEFORMATOPTS;Kräv att inställningar sparas
SAVEDLG_JPEGQUAL;JPEG-kvalitet
-SAVEDLG_PNGCOMPR;PNG-komprimering
SAVEDLG_PUTTOQUEUE;Lägg till i behandlingskön
SAVEDLG_PUTTOQUEUEHEAD;Flytta längst fram i behandlingskön
SAVEDLG_PUTTOQUEUETAIL;Flytta längst bak i behandlingskön
@@ -1141,8 +1110,6 @@ TP_COLORAPP_SURROUND_DARK;Mörk
TP_COLORAPP_SURROUND_DIM;Dunkelt
TP_COLORAPP_SURROUND_EXDARK;Extremt mörkt
TP_COLORAPP_SURROUND_TOOLTIP;Ändra toner och färger för att ta i beaktande betraktningsförhållandena för utmatningsenheten\n\nMedel:\nMedelljusa omgivningar (standard)\nBilden kommer ej att ändras\n\nDunkelt:\nDunkla omgivningar (TV)\nBilden kommer att bli aningen mörkare\n\nMörk:\nMörka omgivningar (projektor)\nBilden kommer att bli mörkare\n\nExtremt mörkt:\nExtremt mörka omgivningar (cutsheet)\nBilden kommer bli mycket mörk
-TP_COLORAPP_SURSOURCE;Mörk omgivning
-TP_COLORAPP_SURSOURCE_TOOLTIP;Kan användas om källbilden har en mörk kant.
TP_COLORAPP_TCMODE_BRIGHTNESS;Intensitet
TP_COLORAPP_TCMODE_CHROMA;Kroma
TP_COLORAPP_TCMODE_COLORF;Färgmättnad
@@ -1210,7 +1177,6 @@ TP_DEFRINGE_LABEL;Fyll ut överstrålning
TP_DEFRINGE_RADIUS;Radie
TP_DEFRINGE_THRESHOLD;Tröskelvärde
TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatisk global
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Försök att utvärdera chroma-bruset\nVar försiktig, den här beräkningen görs på genomsnittet och är tämligen subjektiv!
TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Krominans - Blå-Gul
TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Krominans-kurva
TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Krominans
@@ -1225,8 +1191,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Förhandsgranska brus: Medel=%1
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Förhandsgranska brus: Medel= - Hög= -
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile-storlek=%1, Center: Tx=%2 Ty=%3
TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Krominans - Röd-Grön
-TP_DIRPYRDENOISE_ENH;Förbättrat läge
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Ökar kvaliteten på brusreduceringen till priset av 20 % längre beräkningstid
TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminanskontroll
TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminans-kurva
TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Luminansdetalj
@@ -1234,7 +1198,6 @@ TP_DIRPYRDENOISE_LUMINANCE_FRAME;Luminans
TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminans
TP_DIRPYRDENOISE_MAIN_COLORSPACE;Metod
TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;Lab
-TP_DIRPYRDENOISE_MAIN_COLORSPACE_LABEL;Brusreducering
TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;För råfiler kan antingen RGB- eller Labmetoder användas.\n\nFör icke-råfiler kommer Labmetoden att användas, oavsett vad som är valt.
TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
@@ -1247,7 +1210,6 @@ TP_DIRPYRDENOISE_MEDIAN_METHOD_LAB;L*a*b*
TP_DIRPYRDENOISE_MEDIAN_METHOD_LUMINANCE;Endast luminans
TP_DIRPYRDENOISE_MEDIAN_METHOD_RGB;RGB
TP_DIRPYRDENOISE_MEDIAN_METHOD_WEIGHTED;Viktad L* (litet) + a*b* (normal)
-TP_DIRPYRDENOISE_SLI;Reglage
TP_DIRPYRDENOISE_TYPE_3X3;3×3
TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 mjuk
TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1314,10 +1276,6 @@ TP_FLATFIELD_BT_HORIZONTAL;Horisontell
TP_FLATFIELD_BT_VERTHORIZ;Vertikal + horisontell
TP_FLATFIELD_BT_VERTICAL;Vertikal
TP_FLATFIELD_LABEL;Plattfält
-TP_GAMMA_CURV;gamma
-TP_GAMMA_FREE;Obunden gamma
-TP_GAMMA_OUTPUT;Utmatningsgamma
-TP_GAMMA_SLOP;Lutning (linjär)
TP_GENERAL_11SCALE_TOOLTIP;Effekten från det här verktyget eller några av dess underkomponenter syns endast då de visas i 1:1-skala eller högre
TP_GRADIENT_CENTER;Centrum
TP_GRADIENT_CENTER_X;Centrum, X
@@ -1346,8 +1304,6 @@ TP_HSVEQUALIZER_VAL;Värde
TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Bas-exponering
TP_ICM_APPLYHUESATMAP;Bas-tabell
TP_ICM_APPLYLOOKTABLE_TOOLTIP;Tillämpa den inbäddade DCP:ns uppslagstabell. Inställningen är bara aktiv om den valda DCP har en sådan.
-TP_ICM_BLENDCMSMATRIX;Mixa högdagrar med matris
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Möjliggör återskapande av utbrända högdagrar när LUT-baserade ICC-profiler används.
TP_ICM_BPC;Svartpunktskompensation
TP_ICM_DCPILLUMINANT;Ljuskälla
TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolerad ljuskälla
@@ -1443,7 +1399,6 @@ TP_PRSHARPENING_TOOLTIP;Skärper bilden efter att den storleksförändrats. Fung
TP_RAWCACORR_AUTO;Reducera automatiskt kromatiska abberationer
TP_RAWCACORR_CABLUE;Blå
TP_RAWCACORR_CARED;Röd
-TP_RAWCACORR_CASTR;Styrka
TP_RAWEXPOS_BLACKS;Svartpunktsnivåer
TP_RAWEXPOS_BLACK_0;Grön 1 (ledare)
TP_RAWEXPOS_BLACK_1;Röd
@@ -1555,10 +1510,8 @@ TP_SAVEDIALOG_OK_TIP;Kortkommando: Ctrl-Enter
TP_SHADOWSHLIGHTS_HIGHLIGHTS;Högdager
TP_SHADOWSHLIGHTS_HLTONALW;Tonvidd (Högdagrar)
TP_SHADOWSHLIGHTS_LABEL;Skugg- och högdageråterställning
-TP_SHADOWSHLIGHTS_LOCALCONTR;Lokal kontrast
TP_SHADOWSHLIGHTS_RADIUS;Radie
TP_SHADOWSHLIGHTS_SHADOWS;Skuggor
-TP_SHADOWSHLIGHTS_SHARPMASK;Skarp mask
TP_SHADOWSHLIGHTS_SHTONALW;Tonvidd (Skuggor)
TP_SHARPENEDGE_AMOUNT;Mängd
TP_SHARPENEDGE_LABEL;Kanter
@@ -2057,11 +2010,9 @@ ZOOMPANEL_ZOOMOUT;Förminska.\nKortkommando: -
!PREFERENCES_CROP_GUIDES_FRAME;Frame
!PREFERENCES_CROP_GUIDES_FULL;Original
!PREFERENCES_CROP_GUIDES_NONE;None
-!PREFERENCES_D50_OLD;5000K
!PREFERENCES_DIRECTORIES;Directories
!PREFERENCES_EDITORCMDLINE;Custom command line
!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
!PREFERENCES_LANG;Language
!PREFERENCES_MONINTENT;Default rendering intent
@@ -2241,15 +2192,12 @@ ZOOMPANEL_ZOOMOUT;Förminska.\nKortkommando: -
!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
!TP_RAW_PIXELSHIFTMM_OFF;Off
!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -2269,7 +2217,6 @@ ZOOMPANEL_ZOOMOUT;Förminska.\nKortkommando: -
!TP_RETINEX_CURVEEDITOR_CD_TOOLTIP;Luminance according to luminance L=f(L)\nCorrect raw data to reduce halos and artifacts.
!TP_RETINEX_CURVEEDITOR_MAP_TOOLTIP;This curve can be applied alone or with a Gaussian mask or wavelet mask.\nBeware of artifacts!
!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
!TP_RETINEX_GAMMA_TOOLTIP;Restore tones by applying gamma before and after Retinex. Different from Retinex curves or others curves (Lab, Exposure, etc.).
!TP_RETINEX_HIGHLIGHT_TOOLTIP;Increase action of High algorithm.\nMay require you to re-adjust "Neighboring pixels" and to increase the "White-point correction" in the Raw tab -> Raw White Points tool.
!TP_RETINEX_LABEL_MASK;Mask
diff --git a/rtdata/languages/Turkish b/rtdata/languages/Turkish
deleted file mode 100644
index ae12f6fc5..000000000
--- a/rtdata/languages/Turkish
+++ /dev/null
@@ -1,2328 +0,0 @@
-#01 2008-03-02 Oguz
-
-CURVEEDITOR_LINEAR;Doğrusal
-CURVEEDITOR_LOADDLGLABEL;Eğriyi yükle...
-CURVEEDITOR_SAVEDLGLABEL;Eğriyi kaydet...
-CURVEEDITOR_TOOLTIPLINEAR;Eğriyi düzelt
-CURVEEDITOR_TOOLTIPLOAD;Kayıtlı bir eğriyi yü
-CURVEEDITOR_TOOLTIPSAVE;Kullanılan eğriyi kaydet
-DIRBROWSER_FOLDERS;Klasörler
-EXIFFILTER_APERTURE;Aperture
-EXIFFILTER_CAMERA;Camera
-EXIFFILTER_FOCALLEN;Focal Length
-EXIFFILTER_ISO;ISO
-EXIFFILTER_LENS;Lens
-EXIFFILTER_SHUTTER;Shutter
-EXIFPANEL_ADDEDIT;Add/Edit
-EXIFPANEL_ADDEDITHINT;Add new tag or edit tag
-EXIFPANEL_ADDTAGDLG_ENTERVALUE;Enter value
-EXIFPANEL_ADDTAGDLG_SELECTTAG;Select tag
-EXIFPANEL_ADDTAGDLG_TITLE;Add/Edit Tag
-EXIFPANEL_KEEP;Keep
-EXIFPANEL_KEEPHINT;Keep the selected tags when writing output file
-EXIFPANEL_REMOVE;Remove
-EXIFPANEL_REMOVEHINT;Remove the selected tags when writing output file
-EXIFPANEL_RESET;Reset
-EXIFPANEL_RESETALL;Reset All
-EXIFPANEL_RESETALLHINT;Reset all tags to their original values
-EXIFPANEL_RESETHINT;Reset the selected tags to their original values
-EXIFPANEL_SUBDIRECTORY;Subdirectory
-FILEBROWSER_APPLYPROFILE;Apply profile
-FILEBROWSER_CLEARPROFILE;Clear profile
-FILEBROWSER_COPYPROFILE;Copy profile
-FILEBROWSER_DELETEDLGLABEL;File delete confirmation
-FILEBROWSER_DELETEDLGMSG;Are you sure you want to delete the selected %1 files?
-FILEBROWSER_EMPTYTRASH;Empty Trash
-FILEBROWSER_EMPTYTRASHHINT;Permanently delete the files of the trash
-FILEBROWSER_PARTIALPASTEPROFILE;Partial paste
-FILEBROWSER_PASTEPROFILE;Paste profile
-FILEBROWSER_POPUPCANCELJOB;Cancel job
-FILEBROWSER_POPUPMOVEEND;Move to end of queue
-FILEBROWSER_POPUPMOVEHEAD;Move to head of queue
-FILEBROWSER_POPUPOPEN;Open
-FILEBROWSER_POPUPOPENINEDITOR;Open in Editor
-FILEBROWSER_POPUPPROCESS;Put to processing queue
-FILEBROWSER_POPUPREMOVE;Remove from filesystem
-FILEBROWSER_POPUPRENAME;Rename
-FILEBROWSER_POPUPSELECTALL;Select all
-FILEBROWSER_POPUPTRASH;Move to trash
-FILEBROWSER_POPUPUNRANK;Unrank
-FILEBROWSER_POPUPUNTRASH;Remove from trash
-FILEBROWSER_RENAMEDLGLABEL;Rename file
-FILEBROWSER_SHOWDIRHINT;Show all images of the directory
-FILEBROWSER_SHOWRANK1HINT;Show images ranked as 1 star
-FILEBROWSER_SHOWRANK2HINT;Show images ranked as 2 star
-FILEBROWSER_SHOWRANK3HINT;Show images ranked as 3 star
-FILEBROWSER_SHOWRANK4HINT;Show images ranked as 4 star
-FILEBROWSER_SHOWRANK5HINT;Show images ranked as 5 star
-FILEBROWSER_SHOWTRASHHINT;Show content of the trash
-FILEBROWSER_SHOWUNRANKHINT;Show unranked images
-FILEBROWSER_THUMBSIZE;Thumb. size
-FILEBROWSER_ZOOMINHINT;Increase thumbnail size
-FILEBROWSER_ZOOMOUTHINT;Decrease thumbnail size
-GENERAL_ABOUT;Hakkında
-GENERAL_CANCEL;İptal
-GENERAL_DISABLE;Etkisizleştir
-GENERAL_DISABLED;Devre dışı
-GENERAL_ENABLE;Etkinleştir
-GENERAL_ENABLED;Etkin
-GENERAL_LANDSCAPE;Yatay
-GENERAL_NA;Uygun değil
-GENERAL_NO;Hayır
-GENERAL_OK;Tamam
-GENERAL_PORTRAIT;Dikey
-GENERAL_SAVE;Kaydet
-HISTOGRAM_TOOLTIP_B;Mavi histogramını göster/gizle
-HISTOGRAM_TOOLTIP_G;Yeşil histogramını göster/gizle
-HISTOGRAM_TOOLTIP_L;CIELAB aydınlık histogramını göster/gizle
-HISTOGRAM_TOOLTIP_R;Kırmızı histogramını göster/gizle
-HISTORY_CHANGED;Changed
-HISTORY_CUSTOMCURVE;Özel eğri
-HISTORY_FROMCLIPBOARD;From clipboard
-HISTORY_LABEL;Geçmiş
-HISTORY_MSG_1;Fotoğraf yüklendi
-HISTORY_MSG_2;Profil yüklendi
-HISTORY_MSG_3;Profil değişti
-HISTORY_MSG_4;Geçmişte gezinti
-HISTORY_MSG_5;Parlaklık
-HISTORY_MSG_6;Zıtlık
-HISTORY_MSG_7;Siyah
-HISTORY_MSG_8;Pozlama telafisi
-HISTORY_MSG_9;Parıltı sıkıştırma
-HISTORY_MSG_10;Karaltı sıkıştırma
-HISTORY_MSG_11;Ton eğrisi
-HISTORY_MSG_12;Otomatik pozlama
-HISTORY_MSG_13;Pozlama kırpma
-HISTORY_MSG_14;Aydınlık - parlaklık
-HISTORY_MSG_15;Aydınlık - zıtlık
-HISTORY_MSG_16;Aydınlık - siyah
-HISTORY_MSG_17;Aydınlık - parıltı sıkıştırma
-HISTORY_MSG_18;Aydınlık - karaltı sıkıştırma
-HISTORY_MSG_19;Aydınlık eğrisi
-HISTORY_MSG_20;Keskinleştirme
-HISTORY_MSG_21;Keskinleştirme - çap
-HISTORY_MSG_22;Keskinleştirme - miktar
-HISTORY_MSG_23;Keskinleştirme - eşik
-HISTORY_MSG_24;Sadece kenarları keskinleştir
-HISTORY_MSG_25;Keskinleştirme - kenar bulma kuralları
-HISTORY_MSG_26;Keskinleştirme - kenar payı
-HISTORY_MSG_27;Keskinleştirme - hale denetimi
-HISTORY_MSG_28;Hale denetimi - miktar
-HISTORY_MSG_29;Keskinleştirme - yöntem
-HISTORY_MSG_30;Ters evrişim - çap
-HISTORY_MSG_31;Ters evrişim - miktar
-HISTORY_MSG_32;Ters evrişim - düşürme
-HISTORY_MSG_33;Ters evrişim - yineleme
-HISTORY_MSG_34;Renk kırpmayı önle
-HISTORY_MSG_35;Doygunluk kısıtlayıcı
-HISTORY_MSG_36;Doygunluk sınırı
-HISTORY_MSG_37;Renk iteleme
-HISTORY_MSG_38;Beyaz ayarı - yöntem
-HISTORY_MSG_39;Renk ısısı
-HISTORY_MSG_40;Beyaz ayarı - tint
-HISTORY_MSG_41;"A" renk kayması
-HISTORY_MSG_42;"B" kayması
-HISTORY_MSG_43;Aydınlık gürültü giderme
-HISTORY_MSG_44;Aydınlık gürültü giderme - çap
-HISTORY_MSG_45;Aydınlık gürültü giderme - kenar payı
-HISTORY_MSG_46;Renk gürültü giderme
-HISTORY_MSG_47;Renk gürültü giderme - çap
-HISTORY_MSG_48;Renk gürültü giderme - kenar payı
-HISTORY_MSG_49;Kenar duyarlı renk gürültüsü giderme
-HISTORY_MSG_50;Karaltı/parıltı aracı
-HISTORY_MSG_51;Parıltı iteleme
-HISTORY_MSG_52;Karaltı iteleme
-HISTORY_MSG_53;Parıltı - ton genişliği
-HISTORY_MSG_54;Karaltı - ton genişliği
-HISTORY_MSG_55;Bölgesel zıtlık
-HISTORY_MSG_56;Karaltı/parıltı - zıtlık
-HISTORY_MSG_57;Döndürme
-HISTORY_MSG_58;Yatayda çevirme
-HISTORY_MSG_59;Dikeyde çevirme
-HISTORY_MSG_60;Döndürme
-HISTORY_MSG_61;Döndürme
-HISTORY_MSG_62;Lens bükülmesi düzeltme
-HISTORY_MSG_63;Yer imi seçildi
-HISTORY_MSG_64;Fotoğrafı kırp
-HISTORY_MSG_65;Renk kayması düzeltme
-HISTORY_MSG_66;Parıltı kurtarma
-HISTORY_MSG_67;Parıltı kurtarma - miktar
-HISTORY_MSG_68;Parıltı kurtarma - yöntem
-HISTORY_MSG_69;Çalışma renk uzayı
-HISTORY_MSG_70;Çıktı renk uzayı
-HISTORY_MSG_71;Girdi renk uzayı
-HISTORY_MSG_72;Çerçeve etkisi düzeltme
-HISTORY_MSG_73;Kanal karıştırıcı
-HISTORY_MSG_74;Yeniden boyutlandırma - ölçek
-HISTORY_MSG_75;Yeniden boyutlandırma - yöntem
-HISTORY_MSG_76;Exif Metadata
-HISTORY_MSG_77;IPTC Metadata
-HISTORY_MSG_78;Data specified for resize
-HISTORY_MSG_79;Resize width
-HISTORY_MSG_80;Resize height
-HISTORY_MSG_81;Resize enabled
-HISTORY_NEWSNAPSHOT;Yeni şipşak
-HISTORY_SNAPSHOT;Şipşak
-HISTORY_SNAPSHOTS;Şipşaklar
-IPTCPANEL_CATEGORY;Category
-IPTCPANEL_CITY;City
-IPTCPANEL_COPYHINT;Copy IPTC settings to clipboard
-IPTCPANEL_COUNTRY;Country
-IPTCPANEL_CREDIT;Credit
-IPTCPANEL_CREDITHINT;Identifies the provider of the image, not necessarily the owner/creator (Credit).
-IPTCPANEL_DATECREATED;Date Created
-IPTCPANEL_EMBEDDED;Embedded
-IPTCPANEL_EMBEDDEDHINT;Reset to IPTC data embedded in the image file
-IPTCPANEL_HEADLINE;Headline
-IPTCPANEL_INSTRUCTIONS;Instructions
-IPTCPANEL_KEYWORDS;Keywords
-IPTCPANEL_PASTEHINT;Paste IPTC settings from clipboard
-IPTCPANEL_RESET;Reset
-IPTCPANEL_RESETHINT;Reset to profile default
-IPTCPANEL_SOURCE;Source
-IPTCPANEL_TITLE;Title
-MAIN_BUTTON_PREFERENCES;Seçenekler
-MAIN_BUTTON_SAVE;Görüntüyü kaydet
-MAIN_BUTTON_SENDTOEDITOR;Send to editor
-MAIN_FRAME_BATCHQUEUE;Batch Queue
-MAIN_FRAME_FILEBROWSER;File Browser
-MAIN_FRAME_PLACES;Places
-MAIN_FRAME_PLACES_ADD;Add
-MAIN_FRAME_RECENT;Recent Folders
-MAIN_MSG_ALREADYEXISTS;Dosya zaten var.
-MAIN_MSG_CANNOTLOAD;Görüntü yüklenemiyor
-MAIN_MSG_CANNOTSAVE;Dosya kaydetmede hata
-MAIN_MSG_CANNOTSTARTEDITOR;Can not start editor.
-MAIN_MSG_CANNOTSTARTEDITOR_SECONDARY;Please set the correct path in the "Preferences" dialog.
-MAIN_MSG_QOVERWRITE;Üzerine yazmak ister misiniz?
-MAIN_TAB_COLOR;Color
-MAIN_TAB_DETAIL;Detail
-MAIN_TAB_DEVELOP;Develop
-MAIN_TAB_EXIF;Exif
-MAIN_TAB_EXPOSURE;Exposure
-MAIN_TAB_FILTER;Filter
-MAIN_TAB_IPTC;IPTC
-MAIN_TAB_METADATA;Metadata
-MAIN_TAB_TRANSFORM;Dönüşüm
-MAIN_TOOLTIP_HIDEHP;Sol tablayı göster/gizle (geçmiş ile birlikte, shortcut key: H)
-MAIN_TOOLTIP_INDCLIPPEDH;Kırpılmış parıltı gösterme
-MAIN_TOOLTIP_INDCLIPPEDS;Kırpılmış karaltı gösterme
-MAIN_TOOLTIP_QINFO;Görüntü hakkında kısa bilgi
-PARTIALPASTE_BASICGROUP;Basic settings
-PARTIALPASTE_CACORRECTION;C/A correction
-PARTIALPASTE_COARSETRANS;90 deg rotation / flipping
-PARTIALPASTE_COLORGROUP;Color related settings
-PARTIALPASTE_COMPOSITIONGROUP;Composition settings
-PARTIALPASTE_CROP;Crop
-PARTIALPASTE_DIALOGLABEL;Partial paste processing profile
-PARTIALPASTE_DISTORTION;Distortion correction
-PARTIALPASTE_EXIFCHANGES;Changes to exif data
-PARTIALPASTE_EXPOSURE;Exposure
-PARTIALPASTE_ICMSETTINGS;ICM settings
-PARTIALPASTE_IPTCINFO;IPTC info
-PARTIALPASTE_LENSGROUP;Lens related settings
-PARTIALPASTE_METAGROUP;Metadata
-PARTIALPASTE_RESIZE;Resize
-PARTIALPASTE_ROTATION;Rotation
-PARTIALPASTE_SHADOWSHIGHLIGHTS;Shadows/Highlights
-PARTIALPASTE_SHARPENING;Sharpening
-PARTIALPASTE_VIGNETTING;Vignetting correction
-PARTIALPASTE_WHITEBALANCE;White balance
-PREFERENCES_APPLNEXTSTARTUP;Bir sonraki başlamada uygulacacak.
-PREFERENCES_CACHEMAXENTRIES;Maximal Number of Cache Entries
-PREFERENCES_CACHEOPTS;Cache Options
-PREFERENCES_CACHETHUMBHEIGHT;Maximal Thumbnail Height
-PREFERENCES_CLIPPINGIND;Kırpma gösterme
-PREFERENCES_DATEFORMAT;Tarih biçimi
-PREFERENCES_DATEFORMATHINT;You can use the following formatting strings:\n%y : year\n%m : month\n%d : day\n\nFor example, the hungarian date format is:\n%y/%m/%d
-PREFERENCES_DIRHOME;Kullanıcı dizini
-PREFERENCES_DIRLAST;Son gidilen dizin
-PREFERENCES_DIROTHER;Diğer
-PREFERENCES_DIRSELECTDLG;Başlangıç görüntü dizinini seç...
-PREFERENCES_DIRSOFTWARE;Kurulum dizini
-PREFERENCES_EXTERNALEDITOR;External editor
-PREFERENCES_FBROWSEROPTS;Dosya gezgini seçenekleri
-PREFERENCES_FILEFORMAT;Dosya biçimi
-PREFERENCES_FORIMAGE;Gürüntü dosyaları için
-PREFERENCES_FORRAW;RAW dosyaları için
-PREFERENCES_GIMPPATH;GIMP installation directory
-PREFERENCES_HLTHRESHOLD;Kırpılmış parıltılar için eşik
-PREFERENCES_ICCDIR;ICC profilleri dizini
-PREFERENCES_IMPROCPARAMS;Varsayılan görüntü işleme değişkenleri
-PREFERENCES_INTENT_ABSOLUTE;Mutlak
-PREFERENCES_INTENT_PERCEPTUAL;Algısal
-PREFERENCES_INTENT_RELATIVE;Bağıl
-PREFERENCES_INTENT_SATURATION;Doyum
-PREFERENCES_OUTDIR;Çıktı dizini
-PREFERENCES_OUTDIRFOLDER;Save to folder
-PREFERENCES_OUTDIRFOLDERHINT;Put the saved images to the seledted folder
-PREFERENCES_OUTDIRTEMPLATE;Use Template
-PREFERENCES_OUTDIRTEMPLATEHINT;You can use the following formatting strings:\n%f, %d1, %d2, ..., %p1, %p2, ...\n\nThese formatting strings refer to the directories and sub-paths of the path of the raw file.\n\nFor example, if /home/tom/image/02-09-2006/dsc0012.nefhas been opened, the meaning of the formatting strings are:\n%f=dsc0012, %d1=02-09-2006, %d2=image, ...\n%p1=/home/tom/image/02-09-2006, %p2=/home/tom/image, p3=/home/tom, ...\n\nIf you want to save the output image where the original is, write:\n%p1/%f\n\nIf you want to save the output image in a directory 'converted' located the directory of the original, write:\n%p1/converted/%f\n\nIf you want to save the output image in directory '/home/tom/converted' with keeping the same subdirectory of dates, write:\n%p2/converted/%d1/%f
-PREFERENCES_PARSEDEXT;Parsed Extensions
-PREFERENCES_PARSEDEXTADD;Add Extension
-PREFERENCES_PARSEDEXTADDHINT;Type an extension and press this button to append list
-PREFERENCES_PARSEDEXTDELHINT;Delete selected extension from the list
-PREFERENCES_PROFILEHANDLING;Processing Profile Handling
-PREFERENCES_PROFILELOADPR;Profile Loading Priority
-PREFERENCES_PROFILEPRCACHE;Profile in Cache
-PREFERENCES_PROFILEPRFILE;Profile Next to the Input File
-PREFERENCES_PROFILESAVECACHE;Save Processing Parameters to the Cache
-PREFERENCES_PROFILESAVEINPUT;Save Processing Parameters Next to the Input File
-PREFERENCES_PSPATH;Adobe Photoshop installation directory
-PREFERENCES_SELECTLANG;Dil seç
-PREFERENCES_SHOWBASICEXIF;Temel exif bilgisini göster
-PREFERENCES_SHOWDATETIME;Tarih ve saati göster
-PREFERENCES_SHTHRESHOLD;Kırpılmış karaltılar için eşik
-PREFERENCES_STARTUPIMDIR;Başlangıç görüntü dizini
-PREFERENCES_TAB_BROWSER;Dosya gezgini
-PREFERENCES_TAB_COLORMGR;Renk yönetimi
-PREFERENCES_TAB_GENERAL;Genel
-PREFERENCES_TAB_IMPROC;Görüntü işleme
-PROFILEPANEL_LABEL;Art-işleme profilleri
-PROFILEPANEL_LOADDLGLABEL;Art-işleme değişkenlerini yükle...
-PROFILEPANEL_PCUSTOM;Özel
-PROFILEPANEL_PFILE;Dosyadan
-PROFILEPANEL_PLASTSAVED;Son kaydedilen
-PROFILEPANEL_SAVEDLGLABEL;Art-işleme değişkenlerini kaydet...
-PROFILEPANEL_TOOLTIPCOPY;Copy current profile to clipboard
-PROFILEPANEL_TOOLTIPLOAD;Kayıtlı bir profil yükle
-PROFILEPANEL_TOOLTIPPASTE; Paste profile from clipboard
-PROFILEPANEL_TOOLTIPSAVE;Geçerli profili kaydet
-PROGRESSBAR_LOADING;Görüntü yükleniyor...
-PROGRESSBAR_LOADJPEG;JPEG dosyası yükleniyor...
-PROGRESSBAR_LOADPNG;PNG dosyası yükleniyor...
-PROGRESSBAR_LOADTIFF;TIFF dosyası yükleniyor...
-PROGRESSBAR_PROCESSING;Görüntü işleniyor...
-PROGRESSBAR_READY;Hazır
-PROGRESSBAR_SAVEJPEG;JPEG dosyası kaydediliyor...
-PROGRESSBAR_SAVEPNG;PNG dosyası kaydediliyor...
-PROGRESSBAR_SAVETIFF;TIFF dosyası kaydediliyor...
-QINFO_ISO;ISO
-QINFO_NOEXIF;Exif bilgisi yok.
-SAVEDLG_FILEFORMAT;Dosya biçimi
-SAVEDLG_JPEGQUAL;JPEG kalitesi
-SAVEDLG_PNGCOMPR;PNG sıkıştırma düzeyi
-SAVEDLG_PUTTOQUEUE;Put into processing queue
-SAVEDLG_PUTTOQUEUEHEAD;Put to the head of the processing queue
-SAVEDLG_PUTTOQUEUETAIL;Put to the end of the processing queue
-SAVEDLG_SAVEIMMEDIATELY;Save immediately
-SAVEDLG_SAVESPP;İşeme değişkenlerini görüntü ile birlikte kaydet
-SAVEDLG_TIFFUNCOMPRESSED;Uncompressed TIFF
-TOOLBAR_TOOLTIP_CROP;Seçimi kırp (shorcut key: C)
-TOOLBAR_TOOLTIP_HAND;El aracı (shortcut key: N)
-TOOLBAR_TOOLTIP_STRAIGHTEN;Düz çizgi seçimi (shortcut key: S)
-TOOLBAR_TOOLTIP_WB;Nokta beyaz ayarı (shortcut key: W)
-TP_CACORRECTION_BLUE;Mavi
-TP_CACORRECTION_LABEL;Renk sapması düzeltme
-TP_CACORRECTION_RED;Kırmızı
-TP_CHMIXER_BLUE;Mavi
-TP_CHMIXER_GREEN;Yeşil
-TP_CHMIXER_LABEL;Kanal karıştırıcı
-TP_CHMIXER_RED;Kırmızı
-TP_COARSETRAF_TOOLTIP_HFLIP;Yatayda çevir
-TP_COARSETRAF_TOOLTIP_ROTLEFT;Sola döndür
-TP_COARSETRAF_TOOLTIP_ROTRIGHT;Sağa döndür
-TP_COARSETRAF_TOOLTIP_VFLIP;Dikeyde çevir
-TP_CROP_FIXRATIO;En-boy oranını düzelt:
-TP_CROP_GTDIAGONALS;Çaprazlar kuralı
-TP_CROP_GTNONE;Yok
-TP_CROP_GTRULETHIRDS;Üçler kuralı
-TP_CROP_GUIDETYPE;Kılavuz türü:
-TP_CROP_H;Y
-TP_CROP_LABEL;Kırp
-TP_CROP_W;G
-TP_CROP_X;x
-TP_CROP_Y;y
-TP_DISTORTION_AMOUNT;Miktar
-TP_DISTORTION_LABEL;Bükme
-TP_EXPOSURE_AUTOLEVELS;Otomatik seviyeler
-TP_EXPOSURE_BLACKLEVEL;Siyah
-TP_EXPOSURE_BRIGHTNESS;Parlaklık
-TP_EXPOSURE_CLIP;Kırpma
-TP_EXPOSURE_COMPRHIGHLIGHTS;Parıltı sıkıştırma
-TP_EXPOSURE_COMPRSHADOWS;Karaltı sıkıştırma
-TP_EXPOSURE_CONTRAST;Zıtlık
-TP_EXPOSURE_CURVEEDITOR;Ton eğrisi
-TP_EXPOSURE_EXPCOMP;Poz. telafisi
-TP_EXPOSURE_LABEL;Pozlama
-TP_HLREC_CIELAB;CIELab Blending
-TP_HLREC_COLOR;Renk yayılımı
-TP_HLREC_LABEL;Parıltı kurtarma
-TP_HLREC_LUMINANCE;Aydınlık kurtarma
-TP_HLREC_METHOD;Yöntem:
-TP_ICM_INPUTCAMERA;Kamera varsayılanı
-TP_ICM_INPUTCUSTOM;Özel
-TP_ICM_INPUTDLGLABEL;Girdi ICC profilini seç...
-TP_ICM_INPUTEMBEDDED;Mümkün olduğunda gömülü profili kullan
-TP_ICM_INPUTPROFILE;Girdi Profili
-TP_ICM_LABEL;ICM
-TP_ICM_NOICM;No ICM: sRGB çıktı
-TP_ICM_OUTPUTPROFILE;Çıktı profili
-TP_ICM_WORKINGPROFILE;Çalışma profili
-TP_RAW_DMETHOD;Yöntem
-TP_RAW_FALSECOLOR;Hatalı-renk bastırma değerleri
-TP_RESIZE_H;Y:
-TP_RESIZE_LABEL;Boyutları değiştir
-TP_RESIZE_METHOD;Yöntem:
-TP_RESIZE_NEAREST;En yakın
-TP_RESIZE_SCALE;Ölçekle
-TP_RESIZE_W;G:
-TP_ROTATE_DEGREE;Açı
-TP_ROTATE_LABEL;Döndür
-TP_ROTATE_SELECTLINE; Düz çizgi seç
-TP_SHADOWSHLIGHTS_HIGHLIGHTS;Parıltılar
-TP_SHADOWSHLIGHTS_HLTONALW;Tonsal genişlik
-TP_SHADOWSHLIGHTS_LABEL;Karaltılar/parıltılar
-TP_SHADOWSHLIGHTS_LOCALCONTR;Bölgesel zıtlık
-TP_SHADOWSHLIGHTS_RADIUS;Çap
-TP_SHADOWSHLIGHTS_SHADOWS;Karaltılar
-TP_SHADOWSHLIGHTS_SHTONALW;Tonsal genişlik
-TP_SHARPENING_AMOUNT;Miktar
-TP_SHARPENING_EDRADIUS;Çap
-TP_SHARPENING_EDTOLERANCE;Kenar payı
-TP_SHARPENING_HALOCONTROL;Hale denetimi
-TP_SHARPENING_HCAMOUNT;Miktar
-TP_SHARPENING_LABEL;Keskinleştirme
-TP_SHARPENING_METHOD;Yöntem
-TP_SHARPENING_ONLYEDGES;Sadece kenarları keskinleştir
-TP_SHARPENING_RADIUS;Çap
-TP_SHARPENING_RLD;R-L Ters evrişimi
-TP_SHARPENING_RLD_AMOUNT;Miktar
-TP_SHARPENING_RLD_DAMPING;Düşürme
-TP_SHARPENING_RLD_ITERATIONS;Yineleme
-TP_SHARPENING_THRESHOLD;Eşik
-TP_SHARPENING_USM;Bulanıklık Maskesi
-TP_VIGNETTING_AMOUNT;Miktar
-TP_VIGNETTING_LABEL;Çerçeve etkisi giderme
-TP_VIGNETTING_RADIUS;Çap
-TP_WBALANCE_AUTO;Otomatik
-TP_WBALANCE_CAMERA;Kamera
-TP_WBALANCE_CUSTOM;Özel
-TP_WBALANCE_GREEN;Tint
-TP_WBALANCE_LABEL;Beyaz ayarı
-TP_WBALANCE_METHOD;Yöntem
-TP_WBALANCE_SIZE;Boyut:
-TP_WBALANCE_SPOTWB;Spot BA
-TP_WBALANCE_TEMPERATURE;Isı
-
-!!!!!!!!!!!!!!!!!!!!!!!!!
-! Untranslated keys follow; remove the ! prefix after an entry is translated.
-!!!!!!!!!!!!!!!!!!!!!!!!!
-
-!ABOUT_TAB_BUILD;Version
-!ABOUT_TAB_CREDITS;Credits
-!ABOUT_TAB_LICENSE;License
-!ABOUT_TAB_RELEASENOTES;Release Notes
-!ABOUT_TAB_SPLASH;Splash
-!ADJUSTER_RESET_TO_DEFAULT;Click - reset to default value.\nCtrl+click - reset to initial value.
-!BATCHQUEUE_AUTOSTART;Auto-start
-!BATCHQUEUE_AUTOSTARTHINT;Start processing automatically when a new job arrives.
-!BATCHQUEUE_DESTFILENAME;Path and file name
-!BATCHQUEUE_STARTSTOPHINT;Start or stop processing the images in the queue.\n\nShortcut: Ctrl+s
-!BATCH_PROCESSING;Batch Processing
-!CURVEEDITOR_AXIS_IN;I:
-!CURVEEDITOR_AXIS_LEFT_TAN;LT:
-!CURVEEDITOR_AXIS_OUT;O:
-!CURVEEDITOR_AXIS_RIGHT_TAN;RT:
-!CURVEEDITOR_CATMULLROM;Flexible
-!CURVEEDITOR_CURVE;Curve
-!CURVEEDITOR_CURVES;Curves
-!CURVEEDITOR_CUSTOM;Standard
-!CURVEEDITOR_DARKS;Darks
-!CURVEEDITOR_EDITPOINT_HINT;Enable edition of node in/out values.\n\nRight-click on a node to select it.\nRight-click on empty space to de-select the node.
-!CURVEEDITOR_HIGHLIGHTS;Highlights
-!CURVEEDITOR_LIGHTS;Lights
-!CURVEEDITOR_MINMAXCPOINTS;Equalizer
-!CURVEEDITOR_NURBS;Control cage
-!CURVEEDITOR_PARAMETRIC;Parametric
-!CURVEEDITOR_SHADOWS;Shadows
-!CURVEEDITOR_TOOLTIPCOPY;Copy current curve to clipboard.
-!CURVEEDITOR_TOOLTIPPASTE;Paste curve from clipboard.
-!CURVEEDITOR_TYPE;Type:
-!DONT_SHOW_AGAIN;Don't show this message again.
-!DYNPROFILEEDITOR_DELETE;Delete
-!DYNPROFILEEDITOR_EDIT;Edit
-!DYNPROFILEEDITOR_EDIT_RULE;Edit Dynamic Profile Rule
-!DYNPROFILEEDITOR_ENTRY_TOOLTIP;The matching is case insensitive.\nUse the "re:" prefix to enter\na regular expression.
-!DYNPROFILEEDITOR_IMGTYPE_ANY;Any
-!DYNPROFILEEDITOR_IMGTYPE_HDR;HDR
-!DYNPROFILEEDITOR_IMGTYPE_PS;Pixel Shift
-!DYNPROFILEEDITOR_IMGTYPE_STD;Standard
-!DYNPROFILEEDITOR_MOVE_DOWN;Move Down
-!DYNPROFILEEDITOR_MOVE_UP;Move Up
-!DYNPROFILEEDITOR_NEW;New
-!DYNPROFILEEDITOR_NEW_RULE;New Dynamic Profile Rule
-!DYNPROFILEEDITOR_PROFILE;Processing Profile
-!EDITWINDOW_TITLE;Image Edit
-!EDIT_OBJECT_TOOLTIP;Displays a widget on the preview window which lets you adjust this tool.
-!EDIT_PIPETTE_TOOLTIP;To add an adjustment point to the curve, hold the Ctrl key while left-clicking the desired spot in the image preview.\nTo adjust the point, hold the Ctrl key while left-clicking the corresponding area in the preview, then let go of Ctrl (unless you desire fine control) and while still holding the left mouse button move the mouse up or down to move that point up or down in the curve.
-!EXIFFILTER_EXPOSURECOMPENSATION;Exposure compensation (EV)
-!EXIFFILTER_FILETYPE;File type
-!EXIFFILTER_IMAGETYPE;Image type
-!EXIFFILTER_METADATAFILTER;Enable metadata filters
-!EXIFPANEL_SHOWALL;Show all
-!EXPORT_BYPASS;Processing steps to bypass
-!EXPORT_BYPASS_ALL;Select / Unselect All
-!EXPORT_BYPASS_DEFRINGE;Bypass Defringe
-!EXPORT_BYPASS_DIRPYRDENOISE;Bypass Noise Reduction
-!EXPORT_BYPASS_DIRPYREQUALIZER;Bypass Contrast by Detail Levels
-!EXPORT_BYPASS_EQUALIZER;Bypass Wavelet Levels
-!EXPORT_BYPASS_RAW_CA;Bypass [raw] Chromatic Aberration Correction
-!EXPORT_BYPASS_RAW_CCSTEPS;Bypass [raw] False Color Suppression
-!EXPORT_BYPASS_RAW_DCB_ENHANCE;Bypass [raw] DCB Enhancement Steps
-!EXPORT_BYPASS_RAW_DCB_ITERATIONS;Bypass [raw] DCB Iterations
-!EXPORT_BYPASS_RAW_DF;Bypass [raw] Dark-Frame
-!EXPORT_BYPASS_RAW_FF;Bypass [raw] Flat-Field
-!EXPORT_BYPASS_RAW_GREENTHRESH;Bypass [raw] Green Equilibration
-!EXPORT_BYPASS_RAW_LINENOISE;Bypass [raw] Line Noise Filter
-!EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Bypass [raw] LMMSE Enhancement Steps
-!EXPORT_BYPASS_SHARPENEDGE;Bypass Edge Sharpening
-!EXPORT_BYPASS_SHARPENING;Bypass Sharpening
-!EXPORT_BYPASS_SHARPENMICRO;Bypass Microcontrast
-!EXPORT_BYPASS_SH_HQ;Bypass Sharp Mask Shadows/Highlights
-!EXPORT_FASTEXPORTOPTIONS;Fast Export Options
-!EXPORT_INSTRUCTIONS;Fast Export options provide overrides to bypass time and resource consuming development settings and to run queue processing using the fast export settings instead. This method is recommended for quicker generation of lower resolution images when speed is a priority or when resized output is desired for one or many images without making modifications to their saved development parameters.
-!EXPORT_MAXHEIGHT;Maximum height:
-!EXPORT_MAXWIDTH;Maximum width:
-!EXPORT_PIPELINE;Processing pipeline
-!EXPORT_PUTTOQUEUEFAST; Put to queue for fast export
-!EXPORT_RAW_DMETHOD;Demosaic method
-!EXPORT_USE_FAST_PIPELINE;Dedicated (full processing on resized image)
-!EXPORT_USE_FAST_PIPELINE_TIP;Use a dedicated processing pipeline for images in Fast Export mode, that trades speed for quality. Resizing of the image is done as early as possible, instead of doing it at the end like in the normal pipeline. The speedup can be significant, but be prepared to see artifacts and a general degradation of output quality.
-!EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
-!EXTPROGTARGET_1;raw
-!EXTPROGTARGET_2;queue-processed
-!FILEBROWSER_ADDDELTEMPLATE;Add/Del templates...
-!FILEBROWSER_APPLYPROFILE_PARTIAL;Apply - partial
-!FILEBROWSER_AUTODARKFRAME;Auto dark-frame
-!FILEBROWSER_AUTOFLATFIELD;Auto flat-field
-!FILEBROWSER_BROWSEPATHBUTTONHINT;Click to open specified path, reload folder and apply "find" keywords.
-!FILEBROWSER_BROWSEPATHHINT;Type a path to navigate to.\n\nKeyboard shortcuts:\nCtrl-o to focus to the path text box.\nEnter / Ctrl-Enter to browse there;\nEsc to clear changes.\nShift-Esc to remove focus.\n\nPath shortcuts:\n~ - user's home directory.\n! - user's pictures directory
-!FILEBROWSER_CACHE;Cache
-!FILEBROWSER_CACHECLEARFROMFULL;Clear all including cached profiles
-!FILEBROWSER_CACHECLEARFROMPARTIAL;Clear all except cached profiles
-!FILEBROWSER_COLORLABEL_TOOLTIP;Color label.\n\nUse dropdown menu or shortcuts:\nShift-Ctrl-0 No Color\nShift-Ctrl-1 Red\nShift-Ctrl-2 Yellow\nShift-Ctrl-3 Green\nShift-Ctrl-4 Blue\nShift-Ctrl-5 Purple
-!FILEBROWSER_CURRENT_NAME;Current name:
-!FILEBROWSER_DARKFRAME;Dark-frame
-!FILEBROWSER_DELETEDLGMSGINCLPROC;Are you sure you want to delete the selected %1 files including a queue-processed version?
-!FILEBROWSER_EXTPROGMENU;Open with
-!FILEBROWSER_FLATFIELD;Flat-Field
-!FILEBROWSER_MOVETODARKFDIR;Move to dark-frames directory
-!FILEBROWSER_MOVETOFLATFIELDDIR;Move to flat-fields directory
-!FILEBROWSER_NEW_NAME;New name:
-!FILEBROWSER_OPENDEFAULTVIEWER;Windows default viewer (queue-processed)
-!FILEBROWSER_POPUPCOLORLABEL;Color label
-!FILEBROWSER_POPUPCOLORLABEL0;Label: None
-!FILEBROWSER_POPUPCOLORLABEL1;Label: Red
-!FILEBROWSER_POPUPCOLORLABEL2;Label: Yellow
-!FILEBROWSER_POPUPCOLORLABEL3;Label: Green
-!FILEBROWSER_POPUPCOLORLABEL4;Label: Blue
-!FILEBROWSER_POPUPCOLORLABEL5;Label: Purple
-!FILEBROWSER_POPUPCOPYTO;Copy to...
-!FILEBROWSER_POPUPFILEOPERATIONS;File operations
-!FILEBROWSER_POPUPMOVETO;Move to...
-!FILEBROWSER_POPUPPROCESSFAST;Put to queue (Fast export)
-!FILEBROWSER_POPUPPROFILEOPERATIONS;Processing profile operations
-!FILEBROWSER_POPUPRANK;Rank
-!FILEBROWSER_POPUPRANK0;Unrank
-!FILEBROWSER_POPUPRANK1;Rank 1 *
-!FILEBROWSER_POPUPRANK2;Rank 2 **
-!FILEBROWSER_POPUPRANK3;Rank 3 ***
-!FILEBROWSER_POPUPRANK4;Rank 4 ****
-!FILEBROWSER_POPUPRANK5;Rank 5 *****
-!FILEBROWSER_POPUPREMOVEINCLPROC;Delete with output from queue
-!FILEBROWSER_QUERYBUTTONHINT;Clear the Find query
-!FILEBROWSER_QUERYHINT;Type filenames to search for. Supports partial filenames. Separate the search terms using commas, e.g.\n1001,1004,1199\n\nExclude search terms by prefixing them with !=\ne.g.\n!=1001,1004,1199\n\nShortcuts:\nCtrl-f - focus the Find box,\nEnter - search,\nEsc - clear the Find box,\nShift-Esc - defocus the Find box.
-!FILEBROWSER_QUERYLABEL; Find:
-!FILEBROWSER_RANK1_TOOLTIP;Rank 1 *\nShortcut: Shift-1
-!FILEBROWSER_RANK2_TOOLTIP;Rank 2 *\nShortcut: Shift-2
-!FILEBROWSER_RANK3_TOOLTIP;Rank 3 *\nShortcut: Shift-3
-!FILEBROWSER_RANK4_TOOLTIP;Rank 4 *\nShortcut: Shift-4
-!FILEBROWSER_RANK5_TOOLTIP;Rank 5 *\nShortcut: Shift-5
-!FILEBROWSER_RESETDEFAULTPROFILE;Reset to default
-!FILEBROWSER_SELECTDARKFRAME;Select dark-frame...
-!FILEBROWSER_SELECTFLATFIELD;Select flat-field...
-!FILEBROWSER_SHOWCOLORLABEL1HINT;Show images labeled Red.\nShortcut: Alt-1
-!FILEBROWSER_SHOWCOLORLABEL2HINT;Show images labeled Yellow.\nShortcut: Alt-2
-!FILEBROWSER_SHOWCOLORLABEL3HINT;Show images labeled Green.\nShortcut: Alt-3
-!FILEBROWSER_SHOWCOLORLABEL4HINT;Show images labeled Blue.\nShortcut: Alt-4
-!FILEBROWSER_SHOWCOLORLABEL5HINT;Show images labeled Purple.\nShortcut: Alt-5
-!FILEBROWSER_SHOWEDITEDHINT;Show edited images.\nShortcut: 7
-!FILEBROWSER_SHOWEDITEDNOTHINT;Show not edited images.\nShortcut: 6
-!FILEBROWSER_SHOWEXIFINFO;Show Exif info.\n\nShortcuts:\ni - Multiple Editor Tabs Mode,\nAlt-i - Single Editor Tab Mode.
-!FILEBROWSER_SHOWNOTTRASHHINT;Show only non-deleted images.
-!FILEBROWSER_SHOWORIGINALHINT;Show only original images.\n\nWhen several images exist with the same filename but different extensions, the one considered original is the one whose extension is nearest the top of the parsed extensions list in Preferences > File Browser > Parsed Extensions.
-!FILEBROWSER_SHOWRECENTLYSAVEDHINT;Show saved images.\nShortcut: Alt-7
-!FILEBROWSER_SHOWRECENTLYSAVEDNOTHINT;Show unsaved images.\nShortcut: Alt-6
-!FILEBROWSER_SHOWUNCOLORHINT;Show images without a color label.\nShortcut: Alt-0
-!FILEBROWSER_UNRANK_TOOLTIP;Unrank.\nShortcut: Shift-0
-!FILECHOOSER_FILTER_ANY;All files
-!FILECHOOSER_FILTER_COLPROF;Color profiles (*.icc)
-!FILECHOOSER_FILTER_CURVE;Curve files
-!FILECHOOSER_FILTER_LCP;Lens correction profiles
-!FILECHOOSER_FILTER_PP;Processing profiles
-!FILECHOOSER_FILTER_SAME;Same format as current photo
-!FILECHOOSER_FILTER_TIFF;TIFF files
-!GENERAL_AFTER;After
-!GENERAL_APPLY;Apply
-!GENERAL_ASIMAGE;As Image
-!GENERAL_AUTO;Automatic
-!GENERAL_BEFORE;Before
-!GENERAL_CLOSE;Close
-!GENERAL_CURRENT;Current
-!GENERAL_FILE;File
-!GENERAL_NONE;None
-!GENERAL_OPEN;Open
-!GENERAL_RESET;Reset
-!GENERAL_SAVE_AS;Save as...
-!GENERAL_SLIDER;Slider
-!GENERAL_UNCHANGED;(Unchanged)
-!GENERAL_WARNING;Warning
-!GIMP_PLUGIN_INFO;Welcome to the RawTherapee GIMP plugin!\nOnce you are done editing, simply close the main RawTherapee window and the image will be automatically imported in GIMP.
-!HISTOGRAM_TOOLTIP_BAR;Show/Hide RGB indicator bar.
-!HISTOGRAM_TOOLTIP_CHRO;Show/Hide chromaticity histogram.
-!HISTOGRAM_TOOLTIP_MODE;Toggle between linear, log-linear and log-log scaling of the histogram.
-!HISTOGRAM_TOOLTIP_RAW;Show/Hide raw histogram.
-!HISTORY_MSG_82;Profile changed
-!HISTORY_MSG_83;S/H - Sharp mask
-!HISTORY_MSG_84;Perspective correction
-!HISTORY_MSG_85;Lens Correction - LCP file
-!HISTORY_MSG_86;RGB Curves - Luminosity mode
-!HISTORY_MSG_87;Impulse Noise Reduction
-!HISTORY_MSG_88;Impulse NR threshold
-!HISTORY_MSG_89;Noise Reduction
-!HISTORY_MSG_90;NR - Luminance
-!HISTORY_MSG_91;NR - Chrominance master
-!HISTORY_MSG_92;NR - Gamma
-!HISTORY_MSG_93;CbDL - Value
-!HISTORY_MSG_94;Contrast by Detail Levels
-!HISTORY_MSG_95;L*a*b* - Chromaticity
-!HISTORY_MSG_96;L*a*b* - a* curve
-!HISTORY_MSG_97;L*a*b* - b* curve
-!HISTORY_MSG_98;Demosaicing method
-!HISTORY_MSG_99;Hot pixel filter
-!HISTORY_MSG_100;Exposure - Saturation
-!HISTORY_MSG_101;HSV - Hue
-!HISTORY_MSG_102;HSV - Saturation
-!HISTORY_MSG_103;HSV - Value
-!HISTORY_MSG_104;HSV Equalizer
-!HISTORY_MSG_105;Defringe
-!HISTORY_MSG_106;Defringe - Radius
-!HISTORY_MSG_107;Defringe - Threshold
-!HISTORY_MSG_108;Exposure - HLC threshold
-!HISTORY_MSG_109;Resize - Bounding box
-!HISTORY_MSG_110;Resize - Applies to
-!HISTORY_MSG_111;L*a*b* - Avoid color shift
-!HISTORY_MSG_112;--unused--
-!HISTORY_MSG_113;L*a*b* - Red/skin prot.
-!HISTORY_MSG_114;DCB iterations
-!HISTORY_MSG_115;False color suppression
-!HISTORY_MSG_116;DCB enhancement
-!HISTORY_MSG_117;Raw CA correction - Red
-!HISTORY_MSG_118;Raw CA correction - Blue
-!HISTORY_MSG_119;Line noise filter
-!HISTORY_MSG_120;Green equilibration
-!HISTORY_MSG_121;Raw CA Correction - Auto
-!HISTORY_MSG_122;Dark-Frame - Auto-selection
-!HISTORY_MSG_123;Dark-Frame - File
-!HISTORY_MSG_124;White point correction
-!HISTORY_MSG_126;Flat-Field - File
-!HISTORY_MSG_127;Flat-Field - Auto-selection
-!HISTORY_MSG_128;Flat-Field - Blur radius
-!HISTORY_MSG_129;Flat-Field - Blur type
-!HISTORY_MSG_130;Auto distortion correction
-!HISTORY_MSG_131;NR - Luma
-!HISTORY_MSG_132;NR - Chroma
-!HISTORY_MSG_133;Output gamma
-!HISTORY_MSG_134;Free gamma
-!HISTORY_MSG_135;Free gamma
-!HISTORY_MSG_136;Free gamma slope
-!HISTORY_MSG_137;Black level - Green 1
-!HISTORY_MSG_138;Black level - Red
-!HISTORY_MSG_139;Black level - Blue
-!HISTORY_MSG_140;Black level - Green 2
-!HISTORY_MSG_141;Black level - Link greens
-!HISTORY_MSG_142;ES - Iterations
-!HISTORY_MSG_143;ES - Quantity
-!HISTORY_MSG_144;Microcontrast - Quantity
-!HISTORY_MSG_145;Microcontrast - Uniformity
-!HISTORY_MSG_146;Edge sharpening
-!HISTORY_MSG_147;ES - Luminance only
-!HISTORY_MSG_148;Microcontrast
-!HISTORY_MSG_149;Microcontrast - 3×3 matrix
-!HISTORY_MSG_150;Post-demosaic artifact/noise red.
-!HISTORY_MSG_151;Vibrance
-!HISTORY_MSG_152;Vib - Pastel tones
-!HISTORY_MSG_153;Vib - Saturated tones
-!HISTORY_MSG_154;Vib - Protect skin-tones
-!HISTORY_MSG_155;Vib - Avoid color shift
-!HISTORY_MSG_156;Vib - Link pastel/saturated
-!HISTORY_MSG_157;Vib - P/S threshold
-!HISTORY_MSG_158;TM - Strength
-!HISTORY_MSG_159;TM - Edge stopping
-!HISTORY_MSG_160;TM - Scale
-!HISTORY_MSG_161;TM - Reweighting iterates
-!HISTORY_MSG_162;Tone Mapping
-!HISTORY_MSG_163;RGB Curves - Red
-!HISTORY_MSG_164;RGB Curves - Green
-!HISTORY_MSG_165;RGB Curves - Blue
-!HISTORY_MSG_166;Exposure - Reset
-!HISTORY_MSG_167;Demosaicing method
-!HISTORY_MSG_168;L*a*b* - CC curve
-!HISTORY_MSG_169;L*a*b* - CH curve
-!HISTORY_MSG_170;Vibrance - HH curve
-!HISTORY_MSG_171;L*a*b* - LC curve
-!HISTORY_MSG_172;L*a*b* - Restrict LC
-!HISTORY_MSG_173;NR - Detail recovery
-!HISTORY_MSG_174;CIECAM02
-!HISTORY_MSG_175;CAM02 - CAT02 adaptation
-!HISTORY_MSG_176;CAM02 - Viewing surround
-!HISTORY_MSG_177;CAM02 - Scene luminosity
-!HISTORY_MSG_178;CAM02 - Viewing luminosity
-!HISTORY_MSG_179;CAM02 - White-point model
-!HISTORY_MSG_180;CAM02 - Lightness (J)
-!HISTORY_MSG_181;CAM02 - Chroma (C)
-!HISTORY_MSG_182;CAM02 - Automatic CAT02
-!HISTORY_MSG_183;CAM02 - Contrast (J)
-!HISTORY_MSG_184;CAM02 - Scene surround
-!HISTORY_MSG_185;CAM02 - Gamut control
-!HISTORY_MSG_186;CAM02 - Algorithm
-!HISTORY_MSG_187;CAM02 - Red/skin prot.
-!HISTORY_MSG_188;CAM02 - Brightness (Q)
-!HISTORY_MSG_189;CAM02 - Contrast (Q)
-!HISTORY_MSG_190;CAM02 - Saturation (S)
-!HISTORY_MSG_191;CAM02 - Colorfulness (M)
-!HISTORY_MSG_192;CAM02 - Hue (h)
-!HISTORY_MSG_193;CAM02 - Tone curve 1
-!HISTORY_MSG_194;CAM02 - Tone curve 2
-!HISTORY_MSG_195;CAM02 - Tone curve 1
-!HISTORY_MSG_196;CAM02 - Tone curve 2
-!HISTORY_MSG_197;CAM02 - Color curve
-!HISTORY_MSG_198;CAM02 - Color curve
-!HISTORY_MSG_199;CAM02 - Output histograms
-!HISTORY_MSG_200;CAM02 - Tone mapping
-!HISTORY_MSG_201;NR - Chrominance - R&G
-!HISTORY_MSG_202;NR - Chrominance - B&Y
-!HISTORY_MSG_203;NR - Color space
-!HISTORY_MSG_204;LMMSE enhancement steps
-!HISTORY_MSG_205;CAM02 - Hot/bad pixel filter
-!HISTORY_MSG_206;CAT02 - Auto scene luminosity
-!HISTORY_MSG_207;Defringe - Hue curve
-!HISTORY_MSG_208;WB - B/R equalizer
-!HISTORY_MSG_210;GF - Angle
-!HISTORY_MSG_211;Graduated Filter
-!HISTORY_MSG_212;VF - Strength
-!HISTORY_MSG_213;Vignette Filter
-!HISTORY_MSG_214;Black-and-White
-!HISTORY_MSG_215;B&W - CM - Red
-!HISTORY_MSG_216;B&W - CM - Green
-!HISTORY_MSG_217;B&W - CM - Blue
-!HISTORY_MSG_218;B&W - Gamma - Red
-!HISTORY_MSG_219;B&W - Gamma - Green
-!HISTORY_MSG_220;B&W - Gamma - Blue
-!HISTORY_MSG_221;B&W - Color filter
-!HISTORY_MSG_222;B&W - Presets
-!HISTORY_MSG_223;B&W - CM - Orange
-!HISTORY_MSG_224;B&W - CM - Yellow
-!HISTORY_MSG_225;B&W - CM - Cyan
-!HISTORY_MSG_226;B&W - CM - Magenta
-!HISTORY_MSG_227;B&W - CM - Purple
-!HISTORY_MSG_228;B&W - Luminance equalizer
-!HISTORY_MSG_229;B&W - Luminance equalizer
-!HISTORY_MSG_230;B&W - Mode
-!HISTORY_MSG_231;B&W - 'Before' curve
-!HISTORY_MSG_232;B&W - 'Before' curve type
-!HISTORY_MSG_233;B&W - 'After' curve
-!HISTORY_MSG_234;B&W - 'After' curve type
-!HISTORY_MSG_235;B&W - CM - Auto
-!HISTORY_MSG_236;--unused--
-!HISTORY_MSG_237;B&W - CM
-!HISTORY_MSG_238;GF - Feather
-!HISTORY_MSG_239;GF - Strength
-!HISTORY_MSG_240;GF - Center
-!HISTORY_MSG_241;VF - Feather
-!HISTORY_MSG_242;VF - Roundness
-!HISTORY_MSG_243;VC - Radius
-!HISTORY_MSG_244;VC - Strength
-!HISTORY_MSG_245;VC - Center
-!HISTORY_MSG_246;L*a*b* - CL curve
-!HISTORY_MSG_247;L*a*b* - LH curve
-!HISTORY_MSG_248;L*a*b* - HH curve
-!HISTORY_MSG_249;CbDL - Threshold
-!HISTORY_MSG_250;NR - Enhanced
-!HISTORY_MSG_251;B&W - Algorithm
-!HISTORY_MSG_252;CbDL - Skin tar/prot
-!HISTORY_MSG_253;CbDL - Reduce artifacts
-!HISTORY_MSG_254;CbDL - Skin hue
-!HISTORY_MSG_255;NR - Median filter
-!HISTORY_MSG_256;NR - Median - Type
-!HISTORY_MSG_257;Color Toning
-!HISTORY_MSG_258;CT - Color curve
-!HISTORY_MSG_259;CT - Opacity curve
-!HISTORY_MSG_260;CT - a*[b*] opacity
-!HISTORY_MSG_261;CT - Method
-!HISTORY_MSG_262;CT - b* opacity
-!HISTORY_MSG_263;CT - Shadows - Red
-!HISTORY_MSG_264;CT - Shadows - Green
-!HISTORY_MSG_265;CT - Shadows - Blue
-!HISTORY_MSG_266;CT - Mid - Red
-!HISTORY_MSG_267;CT - Mid - Green
-!HISTORY_MSG_268;CT - Mid - Blue
-!HISTORY_MSG_269;CT - High - Red
-!HISTORY_MSG_270;CT - High - Green
-!HISTORY_MSG_271;CT - High - Blue
-!HISTORY_MSG_272;CT - Balance
-!HISTORY_MSG_273;CT - Color Balance SMH
-!HISTORY_MSG_274;CT - Sat. Shadows
-!HISTORY_MSG_275;CT - Sat. Highlights
-!HISTORY_MSG_276;CT - Opacity
-!HISTORY_MSG_277;--unused--
-!HISTORY_MSG_278;CT - Preserve luminance
-!HISTORY_MSG_279;CT - Shadows
-!HISTORY_MSG_280;CT - Highlights
-!HISTORY_MSG_281;CT - Sat. strength
-!HISTORY_MSG_282;CT - Sat. threshold
-!HISTORY_MSG_283;CT - Strength
-!HISTORY_MSG_284;CT - Auto sat. protection
-!HISTORY_MSG_285;NR - Median - Method
-!HISTORY_MSG_286;NR - Median - Type
-!HISTORY_MSG_287;NR - Median - Iterations
-!HISTORY_MSG_288;Flat-Field - Clip control
-!HISTORY_MSG_289;Flat-Field - Clip control - Auto
-!HISTORY_MSG_290;Black Level - Red
-!HISTORY_MSG_291;Black Level - Green
-!HISTORY_MSG_292;Black Level - Blue
-!HISTORY_MSG_293;Film Simulation
-!HISTORY_MSG_294;Film Simulation - Strength
-!HISTORY_MSG_295;Film Simulation - Film
-!HISTORY_MSG_296;NR - Luminance curve
-!HISTORY_MSG_297;NR - Mode
-!HISTORY_MSG_298;Dead pixel filter
-!HISTORY_MSG_299;NR - Chrominance curve
-!HISTORY_MSG_300;-
-!HISTORY_MSG_301;NR - Luma control
-!HISTORY_MSG_302;NR - Chroma method
-!HISTORY_MSG_303;NR - Chroma method
-!HISTORY_MSG_304;W - Contrast levels
-!HISTORY_MSG_305;Wavelet Levels
-!HISTORY_MSG_306;W - Process
-!HISTORY_MSG_307;W - Process
-!HISTORY_MSG_308;W - Process direction
-!HISTORY_MSG_309;W - ES - Detail
-!HISTORY_MSG_310;W - Residual - Sky tar/prot
-!HISTORY_MSG_311;W - Wavelet levels
-!HISTORY_MSG_312;W - Residual - Shadows threshold
-!HISTORY_MSG_313;W - Chroma - Sat/past
-!HISTORY_MSG_314;W - Gamut - Reduce artifacts
-!HISTORY_MSG_315;W - Residual - Contrast
-!HISTORY_MSG_316;W - Gamut - Skin tar/prot
-!HISTORY_MSG_317;W - Gamut - Skin hue
-!HISTORY_MSG_318;W - Contrast - Highlight levels
-!HISTORY_MSG_319;W - Contrast - Highlight range
-!HISTORY_MSG_320;W - Contrast - Shadow range
-!HISTORY_MSG_321;W - Contrast - Shadow levels
-!HISTORY_MSG_322;W - Gamut - Avoid color shift
-!HISTORY_MSG_323;W - ES - Local contrast
-!HISTORY_MSG_324;W - Chroma - Pastel
-!HISTORY_MSG_325;W - Chroma - Saturated
-!HISTORY_MSG_326;W - Chroma - Method
-!HISTORY_MSG_327;W - Contrast - Apply to
-!HISTORY_MSG_328;W - Chroma - Link strength
-!HISTORY_MSG_329;W - Toning - Opacity RG
-!HISTORY_MSG_330;W - Toning - Opacity BY
-!HISTORY_MSG_331;W - Contrast levels - Extra
-!HISTORY_MSG_332;W - Tiling method
-!HISTORY_MSG_333;W - Residual - Shadows
-!HISTORY_MSG_334;W - Residual - Chroma
-!HISTORY_MSG_335;W - Residual - Highlights
-!HISTORY_MSG_336;W - Residual - Highlights threshold
-!HISTORY_MSG_337;W - Residual - Sky hue
-!HISTORY_MSG_338;W - ES - Radius
-!HISTORY_MSG_339;W - ES - Strength
-!HISTORY_MSG_340;W - Strength
-!HISTORY_MSG_341;W - Edge performance
-!HISTORY_MSG_342;W - ES - First level
-!HISTORY_MSG_343;W - Chroma levels
-!HISTORY_MSG_344;W - Meth chroma sl/cur
-!HISTORY_MSG_345;W - ES - Local contrast
-!HISTORY_MSG_346;W - ES - Local contrast method
-!HISTORY_MSG_347;W - Denoise - Level 1
-!HISTORY_MSG_348;W - Denoise - Level 2
-!HISTORY_MSG_349;W - Denoise - Level 3
-!HISTORY_MSG_350;W - ES - Edge detection
-!HISTORY_MSG_351;W - Residual - HH curve
-!HISTORY_MSG_352;W - Background
-!HISTORY_MSG_353;W - ES - Gradient sensitivity
-!HISTORY_MSG_354;W - ES - Enhanced
-!HISTORY_MSG_355;W - ES - Threshold low
-!HISTORY_MSG_356;W - ES - Threshold high
-!HISTORY_MSG_357;W - Denoise - Link with ES
-!HISTORY_MSG_358;W - Gamut - CH
-!HISTORY_MSG_359;Hot/Dead - Threshold
-!HISTORY_MSG_360;TM - Gamma
-!HISTORY_MSG_361;W - Final - Chroma balance
-!HISTORY_MSG_362;W - Residual - Compression method
-!HISTORY_MSG_363;W - Residual - Compression strength
-!HISTORY_MSG_364;W - Final - Contrast balance
-!HISTORY_MSG_365;W - Final - Delta balance
-!HISTORY_MSG_366;W - Residual - Compression gamma
-!HISTORY_MSG_367;W - Final - 'After' contrast curve
-!HISTORY_MSG_368;W - Final - Contrast balance
-!HISTORY_MSG_369;W - Final - Balance method
-!HISTORY_MSG_370;W - Final - Local contrast curve
-!HISTORY_MSG_371;Post-Resize Sharpening
-!HISTORY_MSG_372;PRS USM - Radius
-!HISTORY_MSG_373;PRS USM - Amount
-!HISTORY_MSG_374;PRS USM - Threshold
-!HISTORY_MSG_375;PRS USM - Sharpen only edges
-!HISTORY_MSG_376;PRS USM - Edge detection radius
-!HISTORY_MSG_377;PRS USM - Edge tolerance
-!HISTORY_MSG_378;PRS USM - Halo control
-!HISTORY_MSG_379;PRS USM - Halo control amount
-!HISTORY_MSG_380;PRS - Method
-!HISTORY_MSG_381;PRS RLD - Radius
-!HISTORY_MSG_382;PRS RLD - Amount
-!HISTORY_MSG_383;PRS RLD - Damping
-!HISTORY_MSG_384;PRS RLD - Iterations
-!HISTORY_MSG_385;W - Residual - Color Balance
-!HISTORY_MSG_386;W - Residual - CB green high
-!HISTORY_MSG_387;W - Residual - CB blue high
-!HISTORY_MSG_388;W - Residual - CB green mid
-!HISTORY_MSG_389;W - Residual - CB blue mid
-!HISTORY_MSG_390;W - Residual - CB green low
-!HISTORY_MSG_391;W - Residual - CB blue low
-!HISTORY_MSG_392;W - Residual - Color Balance
-!HISTORY_MSG_393;DCP - Look table
-!HISTORY_MSG_394;DCP - Baseline exposure
-!HISTORY_MSG_395;DCP - Base table
-!HISTORY_MSG_396;W - Contrast sub-tool
-!HISTORY_MSG_397;W - Chroma sub-tool
-!HISTORY_MSG_398;W - ES sub-tool
-!HISTORY_MSG_399;W - Residual sub-tool
-!HISTORY_MSG_400;W - Final sub-tool
-!HISTORY_MSG_401;W - Toning sub-tool
-!HISTORY_MSG_402;W - Denoise sub-tool
-!HISTORY_MSG_403;W - ES - Edge sensitivity
-!HISTORY_MSG_404;W - ES - Base amplification
-!HISTORY_MSG_405;W - Denoise - Level 4
-!HISTORY_MSG_406;W - ES - Neighboring pixels
-!HISTORY_MSG_407;Retinex - Method
-!HISTORY_MSG_408;Retinex - Radius
-!HISTORY_MSG_409;Retinex - Contrast
-!HISTORY_MSG_410;Retinex - Offset
-!HISTORY_MSG_411;Retinex - Strength
-!HISTORY_MSG_412;Retinex - Gaussian gradient
-!HISTORY_MSG_413;Retinex - Contrast
-!HISTORY_MSG_414;Retinex - Histogram - Lab
-!HISTORY_MSG_415;Retinex - Transmission
-!HISTORY_MSG_416;Retinex
-!HISTORY_MSG_417;Retinex - Transmission median
-!HISTORY_MSG_418;Retinex - Threshold
-!HISTORY_MSG_419;Retinex - Color space
-!HISTORY_MSG_420;Retinex - Histogram - HSL
-!HISTORY_MSG_421;Retinex - Gamma
-!HISTORY_MSG_422;Retinex - Gamma
-!HISTORY_MSG_423;Retinex - Gamma slope
-!HISTORY_MSG_424;Retinex - HL threshold
-!HISTORY_MSG_425;Retinex - Log base
-!HISTORY_MSG_426;Retinex - Hue equalizer
-!HISTORY_MSG_427;Output rendering intent
-!HISTORY_MSG_428;Monitor rendering intent
-!HISTORY_MSG_429;Retinex - Iterations
-!HISTORY_MSG_430;Retinex - Transmission gradient
-!HISTORY_MSG_431;Retinex - Strength gradient
-!HISTORY_MSG_432;Retinex - M - Highlights
-!HISTORY_MSG_433;Retinex - M - Highlights TW
-!HISTORY_MSG_434;Retinex - M - Shadows
-!HISTORY_MSG_435;Retinex - M - Shadows TW
-!HISTORY_MSG_436;Retinex - M - Radius
-!HISTORY_MSG_437;Retinex - M - Method
-!HISTORY_MSG_438;Retinex - M - Equalizer
-!HISTORY_MSG_439;Retinex - Process
-!HISTORY_MSG_440;CbDL - Method
-!HISTORY_MSG_441;Retinex - Gain transmission
-!HISTORY_MSG_442;Retinex - Scale
-!HISTORY_MSG_443;Output black point compensation
-!HISTORY_MSG_444;WB - Temp bias
-!HISTORY_MSG_445;Raw sub-image
-!HISTORY_MSG_449;PS - ISO adaption
-!HISTORY_MSG_452;PS - Show motion
-!HISTORY_MSG_453;PS - Show mask only
-!HISTORY_MSG_457;PS - Check red/blue
-!HISTORY_MSG_462;PS - Check green
-!HISTORY_MSG_464;PS - Blur motion mask
-!HISTORY_MSG_465;PS - Blur radius
-!HISTORY_MSG_468;PS - Fill holes
-!HISTORY_MSG_469;PS - Median
-!HISTORY_MSG_471;PS - Motion correction
-!HISTORY_MSG_472;PS - Smooth transitions
-!HISTORY_MSG_473;PS - Use LMMSE
-!HISTORY_MSG_474;PS - Equalize
-!HISTORY_MSG_475;PS - Equalize channel
-!HISTORY_MSG_476;CAM02 - Temp out
-!HISTORY_MSG_477;CAM02 - Green out
-!HISTORY_MSG_478;CAM02 - Yb out
-!HISTORY_MSG_479;CAM02 - CAT02 adaptation out
-!HISTORY_MSG_480;CAM02 - Automatic CAT02 out
-!HISTORY_MSG_481;CAM02 - Temp scene
-!HISTORY_MSG_482;CAM02 - Green scene
-!HISTORY_MSG_483;CAM02 - Yb scene
-!HISTORY_MSG_484;CAM02 - Auto Yb scene
-!HISTORY_MSG_485;Lens Correction
-!HISTORY_MSG_486;Lens Correction - Camera
-!HISTORY_MSG_487;Lens Correction - Lens
-!HISTORY_MSG_488;Dynamic Range Compression
-!HISTORY_MSG_489;DRC - Detail
-!HISTORY_MSG_490;DRC - Amount
-!HISTORY_MSG_491;White Balance
-!HISTORY_MSG_492;RGB Curves
-!HISTORY_MSG_493;L*a*b* Adjustments
-!HISTORY_MSG_CLAMPOOG;Clip out-of-gamut colors
-!HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_AB;CT - Color correction
-!HISTORY_MSG_COLORTONING_LABREGION_CHANNEL;CT - Channel
-!HISTORY_MSG_COLORTONING_LABREGION_CHROMATICITYMASK;CT - region C mask
-!HISTORY_MSG_COLORTONING_LABREGION_HUEMASK;CT - H mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESS;CT - Lightness
-!HISTORY_MSG_COLORTONING_LABREGION_LIGHTNESSMASK;CT - L mask
-!HISTORY_MSG_COLORTONING_LABREGION_LIST;CT - List
-!HISTORY_MSG_COLORTONING_LABREGION_MASKBLUR;CT - region mask blur
-!HISTORY_MSG_COLORTONING_LABREGION_OFFSET;CT - region offset
-!HISTORY_MSG_COLORTONING_LABREGION_POWER;CT - region power
-!HISTORY_MSG_COLORTONING_LABREGION_SATURATION;CT - Saturation
-!HISTORY_MSG_COLORTONING_LABREGION_SHOWMASK;CT - region show mask
-!HISTORY_MSG_COLORTONING_LABREGION_SLOPE;CT - region slope
-!HISTORY_MSG_DEHAZE_DEPTH;Dehaze - Depth
-!HISTORY_MSG_DEHAZE_ENABLED;Haze Removal
-!HISTORY_MSG_DEHAZE_SHOW_DEPTH_MAP;Dehaze - Show depth map
-!HISTORY_MSG_DEHAZE_STRENGTH;Dehaze - Strength
-!HISTORY_MSG_DUALDEMOSAIC_AUTO_CONTRAST;Dual demosaic - Auto threshold
-!HISTORY_MSG_DUALDEMOSAIC_CONTRAST;Dual demosaic - Contrast threshold
-!HISTORY_MSG_HISTMATCHING;Auto-matched tone curve
-!HISTORY_MSG_ICM_OUTPUT_PRIMARIES;Output - Primaries
-!HISTORY_MSG_ICM_OUTPUT_TEMP;Output - ICC-v4 illuminant D
-!HISTORY_MSG_ICM_OUTPUT_TYPE;Output - Type
-!HISTORY_MSG_ICM_WORKING_GAMMA;Working - Gamma
-!HISTORY_MSG_ICM_WORKING_SLOPE;Working - Slope
-!HISTORY_MSG_ICM_WORKING_TRC_METHOD;Working - TRC method
-!HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
-!HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness
-!HISTORY_MSG_LOCALCONTRAST_ENABLED;Local Contrast
-!HISTORY_MSG_LOCALCONTRAST_LIGHTNESS;Local Contrast - Lightness
-!HISTORY_MSG_LOCALCONTRAST_RADIUS;Local Contrast - Radius
-!HISTORY_MSG_METADATA_MODE;Metadata copy mode
-!HISTORY_MSG_MICROCONTRAST_CONTRAST;Microcontrast - Contrast threshold
-!HISTORY_MSG_PIXELSHIFT_DEMOSAIC;PS - Demosaic method for motion
-!HISTORY_MSG_PREPROCESS_LINEDENOISE_DIRECTION;Line noise filter direction
-!HISTORY_MSG_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!HISTORY_MSG_PRSHARPEN_CONTRAST;PRS - Contrast threshold
-!HISTORY_MSG_RAWCACORR_AUTOIT;Raw CA Correction - Iterations
-!HISTORY_MSG_RAWCACORR_COLORSHIFT;Raw CA Correction - Avoid color shift
-!HISTORY_MSG_RAW_BORDER;Raw border
-!HISTORY_MSG_RESIZE_ALLOWUPSCALING;Resize - Allow upscaling
-!HISTORY_MSG_SHARPENING_BLUR;Sharpening - Blur radius
-!HISTORY_MSG_SHARPENING_CONTRAST;Sharpening - Contrast threshold
-!HISTORY_MSG_SH_COLORSPACE;S/H - Colorspace
-!HISTORY_MSG_SOFTLIGHT_ENABLED;Soft light
-!HISTORY_MSG_SOFTLIGHT_STRENGTH;Soft light - Strength
-!HISTORY_MSG_TM_FATTAL_ANCHOR;DRC - Anchor
-!HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: Alt-s
-!ICCPROFCREATOR_COPYRIGHT;Copyright:
-!ICCPROFCREATOR_COPYRIGHT_RESET_TOOLTIP;Reset to the default copyright, granted to "RawTherapee, CC0"
-!ICCPROFCREATOR_CUSTOM;Custom
-!ICCPROFCREATOR_DESCRIPTION;Description:
-!ICCPROFCREATOR_DESCRIPTION_ADDPARAM;Append gamma and slope values to the description
-!ICCPROFCREATOR_DESCRIPTION_TOOLTIP;Leave empty to set the default description.
-!ICCPROFCREATOR_GAMMA;Gamma
-!ICCPROFCREATOR_ICCVERSION;ICC version:
-!ICCPROFCREATOR_ILL;Illuminant:
-!ICCPROFCREATOR_ILL_41;D41
-!ICCPROFCREATOR_ILL_50;D50
-!ICCPROFCREATOR_ILL_55;D55
-!ICCPROFCREATOR_ILL_60;D60
-!ICCPROFCREATOR_ILL_65;D65
-!ICCPROFCREATOR_ILL_80;D80
-!ICCPROFCREATOR_ILL_DEF;Default
-!ICCPROFCREATOR_ILL_INC;StdA 2856K
-!ICCPROFCREATOR_ILL_TOOLTIP;You can only set the illuminant for ICC v4 profiles.
-!ICCPROFCREATOR_PRIMARIES;Primaries:
-!ICCPROFCREATOR_PRIM_ACESP0;ACES AP0
-!ICCPROFCREATOR_PRIM_ACESP1;ACES AP1
-!ICCPROFCREATOR_PRIM_ADOBE;Adobe RGB (1998)
-!ICCPROFCREATOR_PRIM_BEST;BestRGB
-!ICCPROFCREATOR_PRIM_BETA;BetaRGB
-!ICCPROFCREATOR_PRIM_BLUX;Blue X
-!ICCPROFCREATOR_PRIM_BLUY;Blue Y
-!ICCPROFCREATOR_PRIM_BRUCE;BruceRGB
-!ICCPROFCREATOR_PRIM_GREX;Green X
-!ICCPROFCREATOR_PRIM_GREY;Green Y
-!ICCPROFCREATOR_PRIM_PROPH;Prophoto
-!ICCPROFCREATOR_PRIM_REC2020;Rec2020
-!ICCPROFCREATOR_PRIM_REDX;Red X
-!ICCPROFCREATOR_PRIM_REDY;Red Y
-!ICCPROFCREATOR_PRIM_SRGB;sRGB
-!ICCPROFCREATOR_PRIM_TOOLTIP;You can only set custom primaries for ICC v4 profiles.
-!ICCPROFCREATOR_PRIM_WIDEG;Widegamut
-!ICCPROFCREATOR_PROF_V2;ICC v2
-!ICCPROFCREATOR_PROF_V4;ICC v4
-!ICCPROFCREATOR_SAVEDIALOG_TITLE;Save ICC profile as...
-!ICCPROFCREATOR_SLOPE;Slope
-!ICCPROFCREATOR_TRC_PRESET;Tone response curve:
-!IPTCPANEL_CATEGORYHINT;Identifies the subject of the image in the opinion of the provider.
-!IPTCPANEL_CITYHINT;Enter the name of the city pictured in this image.
-!IPTCPANEL_COPYRIGHT;Copyright notice
-!IPTCPANEL_COPYRIGHTHINT;Enter a Notice on the current owner of the Copyright for this image, such as ©2008 Jane Doe.
-!IPTCPANEL_COUNTRYHINT;Enter the name of the country pictured in this image.
-!IPTCPANEL_CREATOR;Creator
-!IPTCPANEL_CREATORHINT;Enter the name of the person that created this image.
-!IPTCPANEL_CREATORJOBTITLE;Creator's job title
-!IPTCPANEL_CREATORJOBTITLEHINT;Enter the Job Title of the person listed in the Creator field.
-!IPTCPANEL_DATECREATEDHINT;Enter the Date the image was taken.
-!IPTCPANEL_DESCRIPTION;Description
-!IPTCPANEL_DESCRIPTIONHINT;Enter a "caption" describing the who, what, and why of what is happening in this image, this might include names of people, and/or their role in the action that is taking place within the image.
-!IPTCPANEL_DESCRIPTIONWRITER;Description writer
-!IPTCPANEL_DESCRIPTIONWRITERHINT;Enter the name of the person involved in writing, editing or correcting the description of the image.
-!IPTCPANEL_HEADLINEHINT;Enter a brief publishable synopsis or summary of the contents of the image.
-!IPTCPANEL_INSTRUCTIONSHINT;Enter information about embargoes, or other restrictions not covered by the Copyright field.
-!IPTCPANEL_KEYWORDSHINT;Enter any number of keywords, terms or phrases used to express the subject matter in the image.
-!IPTCPANEL_PROVINCE;Province or state
-!IPTCPANEL_PROVINCEHINT;Enter the name of the province or state pictured in this image.
-!IPTCPANEL_SOURCEHINT;Enter or edit the name of a person or party who has a role in the content supply chain, such as a person or entity from whom you received this image from.
-!IPTCPANEL_SUPPCATEGORIES;Supplemental categories
-!IPTCPANEL_SUPPCATEGORIESHINT;Further refines the subject of the image.
-!IPTCPANEL_TITLEHINT;Enter a short verbal and human readable name for the image, this may be the file name.
-!IPTCPANEL_TRANSREFERENCE;Job ID
-!IPTCPANEL_TRANSREFERENCEHINT;Enter a number or identifier needed for workflow control or tracking.
-!MAIN_BUTTON_FULLSCREEN;Fullscreen
-!MAIN_BUTTON_ICCPROFCREATOR;ICC Profile Creator
-!MAIN_BUTTON_NAVNEXT_TOOLTIP;Navigate to the next image relative to image opened in the Editor.\nShortcut: Shift-F4\n\nTo navigate to the next image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F4
-!MAIN_BUTTON_NAVPREV_TOOLTIP;Navigate to the previous image relative to image opened in the Editor.\nShortcut: Shift-F3\n\nTo navigate to the previous image relative to the currently selected thumbnail in the File Browser or Filmstrip:\nShortcut: F3
-!MAIN_BUTTON_NAVSYNC_TOOLTIP;Synchronize the File Browser or Filmstrip with the Editor to reveal the thumbnail of the currently opened image, and clear any active filters.\nShortcut: x\n\nAs above, but without clearing active filters:\nShortcut: y\n(Note that the thumbnail of the opened image will not be shown if filtered out).
-!MAIN_BUTTON_PUTTOQUEUE_TOOLTIP;Put current image to processing queue.\nShortcut: Ctrl+b
-!MAIN_BUTTON_SAVE_TOOLTIP;Save current image.\nShortcut: Ctrl+s\nSave current profile (.pp3).\nShortcut: Ctrl+Shift+s
-!MAIN_BUTTON_SENDTOEDITOR_TOOLTIP;Edit current image in external editor.\nShortcut: Ctrl+e
-!MAIN_BUTTON_SHOWHIDESIDEPANELS_TOOLTIP;Show/hide all side panels.\nShortcut: m
-!MAIN_BUTTON_UNFULLSCREEN;Exit fullscreen
-!MAIN_FRAME_BATCHQUEUE_TOOLTIP;Processing queue.\nShortcut: Ctrl-F3
-!MAIN_FRAME_EDITOR;Editor
-!MAIN_FRAME_EDITOR_TOOLTIP;Editor.\nShortcut: Ctrl-F4
-!MAIN_FRAME_FILEBROWSER_TOOLTIP;File browser.\nShortcut: Ctrl-F2
-!MAIN_FRAME_PLACES_DEL;Remove
-!MAIN_MSG_EMPTYFILENAME;Filename unspecified!
-!MAIN_MSG_IMAGEUNPROCESSED;This command requires all selected images to be queue-processed first.
-!MAIN_MSG_NAVIGATOR;Navigator
-!MAIN_MSG_OPERATIONCANCELLED;Operation cancelled
-!MAIN_MSG_PATHDOESNTEXIST;The path\n\n%1\n\ndoes not exist. Please set a correct path in Preferences.
-!MAIN_MSG_SETPATHFIRST;You first have to set a target path in Preferences in order to use this function!
-!MAIN_MSG_TOOMANYOPENEDITORS;Too many open editors.\nPlease close an editor to continue.
-!MAIN_MSG_WRITEFAILED;Failed to write\n"%1"\n\nMake sure that the folder exists and that you have write permission to it.
-!MAIN_TAB_ADVANCED;Advanced
-!MAIN_TAB_ADVANCED_TOOLTIP;Shortcut: Alt-w
-!MAIN_TAB_COLOR_TOOLTIP;Shortcut: Alt-c
-!MAIN_TAB_DETAIL_TOOLTIP;Shortcut: Alt-d
-!MAIN_TAB_EXPORT; Fast Export
-!MAIN_TAB_EXPOSURE_TOOLTIP;Shortcut: Alt-e
-!MAIN_TAB_FAVORITES;Favorites
-!MAIN_TAB_FAVORITES_TOOLTIP;Shortcut: Alt-u
-!MAIN_TAB_INSPECT; Inspect
-!MAIN_TAB_METADATA_TOOLTIP;Shortcut: Alt-m
-!MAIN_TAB_RAW;Raw
-!MAIN_TAB_RAW_TOOLTIP;Shortcut: Alt-r
-!MAIN_TAB_TRANSFORM_TOOLTIP;Shortcut: Alt-t
-!MAIN_TOOLTIP_BACKCOLOR0;Background color of the preview: theme-based\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR1;Background color of the preview: black\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR2;Background color of the preview: white\nShortcut: 9
-!MAIN_TOOLTIP_BACKCOLOR3;Background color of the preview: middle grey\nShortcut: 9
-!MAIN_TOOLTIP_BEFOREAFTERLOCK;Lock / Unlock the Before view\n\nLock: keep the Before view unchanged.\nUseful to evaluate the cumulative effect of multiple tools.\nAdditionally, comparisons can be made to any state in the History.\n\nUnlock: the Before view will follow the After view one step behind, showing the image before the effect of the currently used tool.
-!MAIN_TOOLTIP_PREVIEWB;Preview the blue channel.\nShortcut: b
-!MAIN_TOOLTIP_PREVIEWFOCUSMASK;Preview the focus mask.\nShortcut: Shift-f\n\nMore accurate on images with shallow depth of field, low noise and at higher zoom levels.\nZoom out to 10-30% to improve detection accuracy on noisy images.
-!MAIN_TOOLTIP_PREVIEWG;Preview the green channel.\nShortcut: g
-!MAIN_TOOLTIP_PREVIEWL;Preview the luminosity.\nShortcut: v\n\n0.299*R + 0.587*G + 0.114*B
-!MAIN_TOOLTIP_PREVIEWR;Preview the red channel.\nShortcut: r
-!MAIN_TOOLTIP_PREVIEWSHARPMASK;Preview the sharpening contrast mask.\nShortcut: p\n\nOnly works when sharpening is enabled and zoom >= 100%.
-!MAIN_TOOLTIP_SHOWHIDELP1;Show/Hide the left panel.\nShortcut: l
-!MAIN_TOOLTIP_SHOWHIDERP1;Show/Hide the right panel.\nShortcut: Alt-l
-!MAIN_TOOLTIP_SHOWHIDETP1;Show/Hide the top panel.\nShortcut: Shift-l
-!MAIN_TOOLTIP_THRESHOLD;Threshold
-!MAIN_TOOLTIP_TOGGLE;Toggle the Before/After view.\nShortcut: Shift-b
-!MONITOR_PROFILE_SYSTEM;System default
-!NAVIGATOR_B;B:
-!NAVIGATOR_G;G:
-!NAVIGATOR_H;H:
-!NAVIGATOR_LAB_A;a*:
-!NAVIGATOR_LAB_B;b*:
-!NAVIGATOR_LAB_L;L*:
-!NAVIGATOR_NA; --
-!NAVIGATOR_R;R:
-!NAVIGATOR_S;S:
-!NAVIGATOR_V;V:
-!NAVIGATOR_XY_FULL;Width: %1, Height: %2
-!NAVIGATOR_XY_NA;x: --, y: --
-!OPTIONS_BUNDLED_MISSING;The bundled profile "%1" could not be found!\n\nYour installation could be damaged.\n\nDefault internal values will be used instead.
-!OPTIONS_DEFIMG_MISSING;The default profile for non-raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!OPTIONS_DEFRAW_MISSING;The default profile for raw photos could not be found or is not set.\n\nPlease check your profiles' directory, it may be missing or damaged.\n\n"%1" will be used instead.
-!PARTIALPASTE_ADVANCEDGROUP;Advanced Settings
-!PARTIALPASTE_CHANNELMIXER;Channel mixer
-!PARTIALPASTE_CHANNELMIXERBW;Black-and-white
-!PARTIALPASTE_COLORAPP;CIECAM02
-!PARTIALPASTE_COLORTONING;Color toning
-!PARTIALPASTE_COMMONTRANSFORMPARAMS;Auto-fill
-!PARTIALPASTE_DARKFRAMEAUTOSELECT;Dark-frame auto-selection
-!PARTIALPASTE_DARKFRAMEFILE;Dark-frame file
-!PARTIALPASTE_DEFRINGE;Defringe
-!PARTIALPASTE_DEHAZE;Haze removal
-!PARTIALPASTE_DETAILGROUP;Detail Settings
-!PARTIALPASTE_DIRPYRDENOISE;Noise reduction
-!PARTIALPASTE_DIRPYREQUALIZER;Contrast by detail levels
-!PARTIALPASTE_EPD;Tone mapping
-!PARTIALPASTE_EQUALIZER;Wavelet levels
-!PARTIALPASTE_EVERYTHING;Everything
-!PARTIALPASTE_FILMSIMULATION;Film simulation
-!PARTIALPASTE_FLATFIELDAUTOSELECT;Flat-field auto-selection
-!PARTIALPASTE_FLATFIELDBLURRADIUS;Flat-field blur radius
-!PARTIALPASTE_FLATFIELDBLURTYPE;Flat-field blur type
-!PARTIALPASTE_FLATFIELDCLIPCONTROL;Flat-field clip control
-!PARTIALPASTE_FLATFIELDFILE;Flat-field file
-!PARTIALPASTE_GRADIENT;Graduated filter
-!PARTIALPASTE_HSVEQUALIZER;HSV equalizer
-!PARTIALPASTE_IMPULSEDENOISE;Impulse noise reduction
-!PARTIALPASTE_LABCURVE;L*a*b* adjustments
-!PARTIALPASTE_LENSPROFILE;Profiled lens correction
-!PARTIALPASTE_LOCALCONTRAST;Local contrast
-!PARTIALPASTE_METADATA;Metadata mode
-!PARTIALPASTE_PCVIGNETTE;Vignette filter
-!PARTIALPASTE_PERSPECTIVE;Perspective
-!PARTIALPASTE_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!PARTIALPASTE_PREPROCESS_GREENEQUIL;Green equilibration
-!PARTIALPASTE_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!PARTIALPASTE_PREPROCESS_LINEDENOISE;Line noise filter
-!PARTIALPASTE_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!PARTIALPASTE_PRSHARPENING;Post-resize sharpening
-!PARTIALPASTE_RAWCACORR_AUTO;CA auto-correction
-!PARTIALPASTE_RAWCACORR_AVOIDCOLORSHIFT;CA avoid color shift
-!PARTIALPASTE_RAWCACORR_CAREDBLUE;CA red & blue
-!PARTIALPASTE_RAWEXPOS_BLACK;Black levels
-!PARTIALPASTE_RAWEXPOS_LINEAR;White point correction
-!PARTIALPASTE_RAWGROUP;Raw Settings
-!PARTIALPASTE_RAW_BORDER;Raw border
-!PARTIALPASTE_RAW_DCBENHANCE;DCB enhancement
-!PARTIALPASTE_RAW_DCBITERATIONS;DCB iterations
-!PARTIALPASTE_RAW_DMETHOD;Demosaic method
-!PARTIALPASTE_RAW_FALSECOLOR;False color suppression
-!PARTIALPASTE_RAW_IMAGENUM;Sub-image
-!PARTIALPASTE_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!PARTIALPASTE_RAW_PIXELSHIFT;Pixel Shift
-!PARTIALPASTE_RETINEX;Retinex
-!PARTIALPASTE_RGBCURVES;RGB curves
-!PARTIALPASTE_SHARPENEDGE;Edges
-!PARTIALPASTE_SHARPENMICRO;Microcontrast
-!PARTIALPASTE_SOFTLIGHT;Soft light
-!PARTIALPASTE_TM_FATTAL;Dynamic range compression
-!PARTIALPASTE_VIBRANCE;Vibrance
-!PREFERENCES_ADD;Add
-!PREFERENCES_APPEARANCE;Appearance
-!PREFERENCES_APPEARANCE_COLORPICKERFONT;Color picker font
-!PREFERENCES_APPEARANCE_CROPMASKCOLOR;Crop mask color
-!PREFERENCES_APPEARANCE_MAINFONT;Main font
-!PREFERENCES_APPEARANCE_NAVGUIDECOLOR;Navigator guide color
-!PREFERENCES_APPEARANCE_THEME;Theme
-!PREFERENCES_AUTOMONPROFILE;Use operating system's main monitor color profile
-!PREFERENCES_AUTOSAVE_TP_OPEN;Save tool collapsed/expanded state on exit
-!PREFERENCES_BATCH_PROCESSING;Batch Processing
-!PREFERENCES_BEHADDALL;All to 'Add'
-!PREFERENCES_BEHADDALLHINT;Set all parameters to the Add mode.\nAdjustments of parameters in the batch tool panel will be deltas to the stored values.
-!PREFERENCES_BEHAVIOR;Behavior
-!PREFERENCES_BEHSETALL;All to 'Set'
-!PREFERENCES_BEHSETALLHINT;Set all parameters to the Set mode.\nAdjustments of parameters in the batch tool panel will be absolute, the actual values will be displayed.
-!PREFERENCES_BLACKBODY;Tungsten
-!PREFERENCES_CACHECLEAR;Clear
-!PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
-!PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
-!PREFERENCES_CACHECLEAR_ONLYPROFILES;Clear only cached processing profiles:
-!PREFERENCES_CACHECLEAR_SAFETY;Only files in the cache are cleared. Processing profiles stored alongside the source images are not touched.
-!PREFERENCES_CHUNKSIZES;Tiles per thread
-!PREFERENCES_CHUNKSIZE_RAW_AMAZE;AMaZE demosaic
-!PREFERENCES_CHUNKSIZE_RAW_CA;Raw CA correction
-!PREFERENCES_CHUNKSIZE_RAW_RCD;RCD demosaic
-!PREFERENCES_CHUNKSIZE_RAW_XT;Xtrans demosaic
-!PREFERENCES_CHUNKSIZE_RGB;RGB processing
-!PREFERENCES_CLUTSCACHE;HaldCLUT Cache
-!PREFERENCES_CLUTSCACHE_LABEL;Maximum number of cached CLUTs
-!PREFERENCES_CLUTSDIR;HaldCLUT directory
-!PREFERENCES_CMMBPC;Black point compensation
-!PREFERENCES_CROP;Crop Editing
-!PREFERENCES_CROP_AUTO_FIT;Automatically zoom to fit the crop
-!PREFERENCES_CROP_GUIDES;Guides shown when not editing the crop
-!PREFERENCES_CROP_GUIDES_FRAME;Frame
-!PREFERENCES_CROP_GUIDES_FULL;Original
-!PREFERENCES_CROP_GUIDES_NONE;None
-!PREFERENCES_CURVEBBOXPOS;Position of curve copy & paste buttons
-!PREFERENCES_CURVEBBOXPOS_ABOVE;Above
-!PREFERENCES_CURVEBBOXPOS_BELOW;Below
-!PREFERENCES_CURVEBBOXPOS_LEFT;Left
-!PREFERENCES_CURVEBBOXPOS_RIGHT;Right
-!PREFERENCES_CUSTPROFBUILD;Custom Processing Profile Builder
-!PREFERENCES_CUSTPROFBUILDHINT;Executable (or script) file called when a new initial processing profile should be generated for an image.\n\nThe path of the communication file (*.ini style, a.k.a. "Keyfile") is added as a command line parameter. It contains various parameters required for the scripts and image Exif to allow a rules-based processing profile generation.\n\nWARNING: You are responsible for using double quotes where necessary if you're using paths containing spaces.
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys format
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
-!PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
-!PREFERENCES_CUSTPROFBUILDPATH;Executable path
-!PREFERENCES_D50;Settings in main menu
-!PREFERENCES_D50_OLD;5000K
-!PREFERENCES_D55;5500K
-!PREFERENCES_D60;6000K
-!PREFERENCES_D65;6500K
-!PREFERENCES_DARKFRAMEFOUND;Found
-!PREFERENCES_DARKFRAMESHOTS;shots
-!PREFERENCES_DARKFRAMETEMPLATES;templates
-!PREFERENCES_DIRDARKFRAMES;Dark-frames directory
-!PREFERENCES_DIRECTORIES;Directories
-!PREFERENCES_EDITORCMDLINE;Custom command line
-!PREFERENCES_EDITORLAYOUT;Editor layout
-!PREFERENCES_FILEBROWSERTOOLBARSINGLEROW;Compact toolbars in File Browser
-!PREFERENCES_FLATFIELDFOUND;Found
-!PREFERENCES_FLATFIELDSDIR;Flat-fields directory
-!PREFERENCES_FLATFIELDSHOTS;shots
-!PREFERENCES_FLATFIELDTEMPLATES;templates
-!PREFERENCES_FLUOF2;Fluorescent F2
-!PREFERENCES_FLUOF7;Fluorescent F7
-!PREFERENCES_FLUOF11;Fluorescent F11
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
-!PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
-!PREFERENCES_GREY;Output device's Yb luminance (%)
-!PREFERENCES_GREY05;Yb=05 CIE L#30
-!PREFERENCES_GREY10;Yb=10 CIE L#40
-!PREFERENCES_GREY15;Yb=15 CIE L#45
-!PREFERENCES_GREY18;Settings in main menu
-!PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-!PREFERENCES_GREY23;Yb=23 CIE L#55
-!PREFERENCES_GREY30;Yb=30 CIE L#60
-!PREFERENCES_GREY40;Yb=40 CIE L#70
-!PREFERENCES_GREYSC;Scene Yb luminance (%)
-!PREFERENCES_GREYSC18;Yb=18 CIE L#50
-!PREFERENCES_GREYSCA;Automatic
-!PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram in left panel
-!PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
-!PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
-!PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
-!PREFERENCES_INSPECT_LABEL;Inspect
-!PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
-!PREFERENCES_INSPECT_MAXBUFFERS_TOOLTIP;Set the maximum number of images stored in cache when hovering over them in the File Browser; systems with little RAM (2GB) should keep this value set to 1 or 2.
-!PREFERENCES_INTERNALTHUMBIFUNTOUCHED;Show embedded JPEG thumbnail if raw is unedited
-!PREFERENCES_LANG;Language
-!PREFERENCES_LANGAUTODETECT;Use system language
-!PREFERENCES_MAXRECENTFOLDERS;Maximum number of recent folders
-!PREFERENCES_MENUGROUPEXTPROGS;Group "Open with"
-!PREFERENCES_MENUGROUPFILEOPERATIONS;Group "File operations"
-!PREFERENCES_MENUGROUPLABEL;Group "Color label"
-!PREFERENCES_MENUGROUPPROFILEOPERATIONS;Group "Processing profile operations"
-!PREFERENCES_MENUGROUPRANK;Group "Rank"
-!PREFERENCES_MENUOPTIONS;Context Menu Options
-!PREFERENCES_METADATA;Metadata
-!PREFERENCES_MONINTENT;Default rendering intent
-!PREFERENCES_MONITOR;Monitor
-!PREFERENCES_MONPROFILE;Default color profile
-!PREFERENCES_MONPROFILE_WARNOSX;Due to MacOS limitations, only sRGB is supported.
-!PREFERENCES_MULTITAB;Multiple Editor Tabs Mode
-!PREFERENCES_MULTITABDUALMON;Multiple Editor Tabs In Own Window Mode
-!PREFERENCES_NAVIGATIONFRAME;Navigation
-!PREFERENCES_OVERLAY_FILENAMES;Overlay filenames on thumbnails in the file browser
-!PREFERENCES_OVERLAY_FILENAMES_FILMSTRIP;Overlay filenames on thumbnails in the editor pannel
-!PREFERENCES_OVERWRITEOUTPUTFILE;Overwrite existing output files
-!PREFERENCES_PANFACTORLABEL;Pan rate amplification
-!PREFERENCES_PARSEDEXTDOWNHINT;Move selected extension down in the list.
-!PREFERENCES_PARSEDEXTUPHINT;Move selected extension up in the list.
-!PREFERENCES_PERFORMANCE_MEASURE;Measure
-!PREFERENCES_PERFORMANCE_MEASURE_HINT;Logs processing times in console
-!PREFERENCES_PERFORMANCE_THREADS;Threads
-!PREFERENCES_PERFORMANCE_THREADS_LABEL;Maximum number of threads for Noise Reduction and Wavelet Levels (0 = Automatic)
-!PREFERENCES_PREVDEMO;Preview Demosaic Method
-!PREFERENCES_PREVDEMO_FAST;Fast
-!PREFERENCES_PREVDEMO_LABEL;Demosaicing method used for the preview at <100% zoom:
-!PREFERENCES_PREVDEMO_SIDECAR;As in PP3
-!PREFERENCES_PRINTER;Printer (Soft-Proofing)
-!PREFERENCES_PROFILESAVEBOTH;Save processing profile both to the cache and next to the input file
-!PREFERENCES_PROFILESAVELOCATION;Processing profile saving location
-!PREFERENCES_PROFILE_NONE;None
-!PREFERENCES_PROPERTY;Property
-!PREFERENCES_PRTINTENT;Rendering intent
-!PREFERENCES_PRTPROFILE;Color profile
-!PREFERENCES_REMEMBERZOOMPAN;Remember zoom % and pan offset
-!PREFERENCES_REMEMBERZOOMPAN_TOOLTIP;Remember the zoom % and pan offset of the current image when opening a new image.\n\nThis option only works in "Single Editor Tab Mode" and when "Demosaicing method used for the preview at <100% zoom" is set to "As in PP3".
-!PREFERENCES_SAVE_TP_OPEN_NOW;Save tool collapsed/expanded state now
-!PREFERENCES_SERIALIZE_TIFF_READ;TIFF Read Settings
-!PREFERENCES_SERIALIZE_TIFF_READ_LABEL;Serialize reading of TIFF files
-!PREFERENCES_SERIALIZE_TIFF_READ_TOOLTIP;Enabling this option when working with folders containing uncompressed TIFF files can increase performance of thumbnail generation.
-!PREFERENCES_SET;Set
-!PREFERENCES_SHOWEXPOSURECOMPENSATION;Append exposure compensation
-!PREFERENCES_SHOWFILMSTRIPTOOLBAR;Show Filmstrip toolbar
-!PREFERENCES_SINGLETAB;Single Editor Tab Mode
-!PREFERENCES_SINGLETABVERTAB;Single Editor Tab Mode, Vertical Tabs
-!PREFERENCES_SND_BATCHQUEUEDONE;Queue processing done
-!PREFERENCES_SND_HELP;Enter a full file path to set a sound, or leave blank for no sound.\nFor system sounds on Windows use "SystemDefault", "SystemAsterisk" etc., and on Linux use "complete", "window-attention" etc.
-!PREFERENCES_SND_LNGEDITPROCDONE;Editor processing done
-!PREFERENCES_SND_THRESHOLDSECS;After seconds
-!PREFERENCES_TAB_DYNAMICPROFILE;Dynamic Profile Rules
-!PREFERENCES_TAB_PERFORMANCE;Performance
-!PREFERENCES_TAB_SOUND;Sounds
-!PREFERENCES_THUMBNAIL_INSPECTOR_JPEG;Embedded JPEG preview
-!PREFERENCES_THUMBNAIL_INSPECTOR_MODE;Image to show
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
-!PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
-!PREFERENCES_TP_LABEL;Tool panel:
-!PREFERENCES_TP_VSCROLLBAR;Hide vertical scrollbar
-!PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
-!PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-!PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
-!PREFERENCES_WORKFLOW;Layout
-!PROFILEPANEL_COPYPPASTE;Parameters to copy
-!PROFILEPANEL_GLOBALPROFILES;Bundled profiles
-!PROFILEPANEL_LOADPPASTE;Parameters to load
-!PROFILEPANEL_MODE_TIP;Processing profile fill mode.\n\nButton pressed: partial profiles will be converted to full profiles; the missing values will be replaced with hard-coded defaults.\n\nButton released: profiles will be applied as they are, altering only those values which they contain.
-!PROFILEPANEL_MYPROFILES;My profiles
-!PROFILEPANEL_PASTEPPASTE;Parameters to paste
-!PROFILEPANEL_PDYNAMIC;Dynamic
-!PROFILEPANEL_PINTERNAL;Neutral
-!PROFILEPANEL_SAVEPPASTE;Parameters to save
-!PROGRESSBAR_DECODING;Decoding...
-!PROGRESSBAR_GREENEQUIL;Green equilibration...
-!PROGRESSBAR_HLREC;Highlight reconstruction...
-!PROGRESSBAR_HOTDEADPIXELFILTER;Hot/dead pixel filter...
-!PROGRESSBAR_LINEDENOISE;Line noise filter...
-!PROGRESSBAR_LOADINGTHUMBS;Loading thumbnails...
-!PROGRESSBAR_NOIMAGES;No images found
-!PROGRESSBAR_PROCESSING_PROFILESAVED;Processing profile saved
-!PROGRESSBAR_RAWCACORR;Raw CA correction...
-!PROGRESSBAR_SNAPSHOT_ADDED;Snapshot added
-!PROGRESSDLG_PROFILECHANGEDINBROWSER;Processing profile changed in browser
-!QINFO_FRAMECOUNT;%2 frames
-!QINFO_HDR;HDR / %2 frame(s)
-!QINFO_PIXELSHIFT;Pixel Shift / %2 frame(s)
-!SAMPLEFORMAT_0;Unknown data format
-!SAMPLEFORMAT_1;8-bit unsigned
-!SAMPLEFORMAT_2;16-bit unsigned
-!SAMPLEFORMAT_4;24-bit LogLuv
-!SAMPLEFORMAT_8;32-bit LogLuv
-!SAMPLEFORMAT_16;16-bit floating-point
-!SAMPLEFORMAT_32;24-bit floating-point
-!SAMPLEFORMAT_64;32-bit floating-point
-!SAVEDLG_AUTOSUFFIX;Automatically add a suffix if the file already exists
-!SAVEDLG_FILEFORMAT_FLOAT; floating-point
-!SAVEDLG_FORCEFORMATOPTS;Force saving options
-!SAVEDLG_SUBSAMP;Subsampling
-!SAVEDLG_SUBSAMP_1;Best compression
-!SAVEDLG_SUBSAMP_2;Balanced
-!SAVEDLG_SUBSAMP_3;Best quality
-!SAVEDLG_SUBSAMP_TOOLTIP;Best compression:\nJ:a:b 4:2:0\nh/v 2/2\nChroma halved horizontally and vertically.\n\nBalanced:\nJ:a:b 4:2:2\nh/v 2/1\nChroma halved horizontally.\n\nBest quality:\nJ:a:b 4:4:4\nh/v 1/1\nNo chroma subsampling.
-!SAVEDLG_WARNFILENAME;File will be named
-!SHCSELECTOR_TOOLTIP;Click right mouse button to reset the position of those 3 sliders.
-!SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
-!SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
-!THRESHOLDSELECTOR_B;Bottom
-!THRESHOLDSELECTOR_BL;Bottom-left
-!THRESHOLDSELECTOR_BR;Bottom-right
-!THRESHOLDSELECTOR_HINT;Hold the Shift key to move individual control points.
-!THRESHOLDSELECTOR_T;Top
-!THRESHOLDSELECTOR_TL;Top-left
-!THRESHOLDSELECTOR_TR;Top-right
-!TOOLBAR_TOOLTIP_COLORPICKER;Lockable Color Picker\n\nWhen the tool is active:\n- Add a picker: left-click.\n- Drag a picker: left-click and drag.\n- Delete a picker: right-click.\n- Delete all pickers: Ctrl+Shift+right-click.\n- Revert to hand tool: right-click outside any picker.
-!TP_BWMIX_ALGO;Algorithm OYCPM
-!TP_BWMIX_ALGO_LI;Linear
-!TP_BWMIX_ALGO_SP;Special effects
-!TP_BWMIX_ALGO_TOOLTIP;Linear: will produce a normal linear response.\nSpecial effects: will produce special effects by mixing channels non-linearly.
-!TP_BWMIX_AUTOCH;Auto
-!TP_BWMIX_CC_ENABLED;Adjust complementary color
-!TP_BWMIX_CC_TOOLTIP;Enable to allow automatic adjustment of complementary colors in ROYGCBPM mode.
-!TP_BWMIX_CHANNEL;Luminance equalizer
-!TP_BWMIX_CURVEEDITOR1;'Before' curve
-!TP_BWMIX_CURVEEDITOR2;'After' curve
-!TP_BWMIX_CURVEEDITOR_AFTER_TOOLTIP;Tone curve, after B&W conversion, at the end of treatment.
-!TP_BWMIX_CURVEEDITOR_BEFORE_TOOLTIP;Tone curve, just before B&W conversion.\nMay take into account the color components.
-!TP_BWMIX_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H).\nPay attention to extreme values as they may cause artifacts.
-!TP_BWMIX_FILTER;Color Filter
-!TP_BWMIX_FILTER_BLUE;Blue
-!TP_BWMIX_FILTER_BLUEGREEN;Blue-Green
-!TP_BWMIX_FILTER_GREEN;Green
-!TP_BWMIX_FILTER_GREENYELLOW;Green-Yellow
-!TP_BWMIX_FILTER_NONE;None
-!TP_BWMIX_FILTER_PURPLE;Purple
-!TP_BWMIX_FILTER_RED;Red
-!TP_BWMIX_FILTER_REDYELLOW;Red-Yellow
-!TP_BWMIX_FILTER_TOOLTIP;The color filter simulates shots taken with a colored filter placed in front of the lens. Colored filters reduce the transmission of specific color ranges and therefore affect their lightness. E.g. a red filter darkens blue skies.
-!TP_BWMIX_FILTER_YELLOW;Yellow
-!TP_BWMIX_GAMMA;Gamma Correction
-!TP_BWMIX_GAM_TOOLTIP;Correct gamma for each RGB channel.
-!TP_BWMIX_LABEL;Black-and-White
-!TP_BWMIX_MET;Method
-!TP_BWMIX_MET_CHANMIX;Channel Mixer
-!TP_BWMIX_MET_DESAT;Desaturation
-!TP_BWMIX_MET_LUMEQUAL;Luminance Equalizer
-!TP_BWMIX_MIXC;Channel Mixer
-!TP_BWMIX_NEUTRAL;Reset
-!TP_BWMIX_RGBLABEL;R: %1%% G: %2%% B: %3%% Total: %4%%
-!TP_BWMIX_RGBLABEL_HINT;Final RGB factors that take care of all the mixer options.\n"Total" displays the sum of the RGB values:\n- always 100% in relative mode\n- higher (lighter) or lower (darker) than 100% in absolute mode.
-!TP_BWMIX_RGB_TOOLTIP;Mix the RGB channels. Use presets for guidance.\nPay attention to negative values that may cause artifacts or erratic behavior.
-!TP_BWMIX_SETTING;Presets
-!TP_BWMIX_SETTING_TOOLTIP;Different presets (film, landscape, etc.) or manual Channel Mixer settings.
-!TP_BWMIX_SET_HIGHCONTAST;High contrast
-!TP_BWMIX_SET_HIGHSENSIT;High Sensitivity
-!TP_BWMIX_SET_HYPERPANCHRO;Hyper Panchromatic
-!TP_BWMIX_SET_INFRARED;Infrared
-!TP_BWMIX_SET_LANDSCAPE;Landscape
-!TP_BWMIX_SET_LOWSENSIT;Low Sensitivity
-!TP_BWMIX_SET_LUMINANCE;Luminance
-!TP_BWMIX_SET_NORMCONTAST;Normal Contrast
-!TP_BWMIX_SET_ORTHOCHRO;Orthochromatic
-!TP_BWMIX_SET_PANCHRO;Panchromatic
-!TP_BWMIX_SET_PORTRAIT;Portrait
-!TP_BWMIX_SET_RGBABS;Absolute RGB
-!TP_BWMIX_SET_RGBREL;Relative RGB
-!TP_BWMIX_SET_ROYGCBPMABS;Absolute ROYGCBPM
-!TP_BWMIX_SET_ROYGCBPMREL;Relative ROYGCBPM
-!TP_BWMIX_TCMODE_FILMLIKE;B&W Film-like
-!TP_BWMIX_TCMODE_SATANDVALBLENDING;B&W Saturation and Value Blending
-!TP_BWMIX_TCMODE_STANDARD;B&W Standard
-!TP_BWMIX_TCMODE_WEIGHTEDSTD;B&W Weighted Standard
-!TP_BWMIX_VAL;L
-!TP_CBDL_AFT;After Black-and-White
-!TP_CBDL_BEF;Before Black-and-White
-!TP_CBDL_METHOD;Process located
-!TP_CBDL_METHOD_TOOLTIP;Choose whether the Contrast by Detail Levels tool is to be positioned after the Black-and-White tool, which makes it work in L*a*b* space, or before it, which makes it work in RGB space.
-!TP_CHROMATABERR_LABEL;Chromatic Aberration
-!TP_COLORAPP_ABSOLUTELUMINANCE;Absolute luminance
-!TP_COLORAPP_ALGO;Algorithm
-!TP_COLORAPP_ALGO_ALL;All
-!TP_COLORAPP_ALGO_JC;Lightness + Chroma (JC)
-!TP_COLORAPP_ALGO_JS;Lightness + Saturation (JS)
-!TP_COLORAPP_ALGO_QM;Brightness + Colorfulness (QM)
-!TP_COLORAPP_ALGO_TOOLTIP;Lets you choose between parameter subsets or all parameters.
-!TP_COLORAPP_BADPIXSL;Hot/bad pixel filter
-!TP_COLORAPP_BADPIXSL_TOOLTIP;Suppression of hot/bad (brightly colored) pixels.\n0 = No effect\n1 = Median\n2 = Gaussian.\nAlternatively, adjust the image to avoid very dark shadows.\n\nThese artifacts are due to limitations of CIECAM02.
-!TP_COLORAPP_BRIGHT;Brightness (Q)
-!TP_COLORAPP_BRIGHT_TOOLTIP;Brightness in CIECAM02 takes into account the white's luminosity and differs from L*a*b* and RGB brightness.
-!TP_COLORAPP_CAT02ADAPTATION_TOOLTIP;When setting manually, values above 65 are recommended.
-!TP_COLORAPP_CHROMA;Chroma (C)
-!TP_COLORAPP_CHROMA_M;Colorfulness (M)
-!TP_COLORAPP_CHROMA_M_TOOLTIP;Colorfulness in CIECAM02 differs from L*a*b* and RGB colorfulness.
-!TP_COLORAPP_CHROMA_S;Saturation (S)
-!TP_COLORAPP_CHROMA_S_TOOLTIP;Saturation in CIECAM02 differs from L*a*b* and RGB saturation.
-!TP_COLORAPP_CHROMA_TOOLTIP;Chroma in CIECAM02 differs from L*a*b* and RGB chroma.
-!TP_COLORAPP_CIECAT_DEGREE;CAT02 adaptation
-!TP_COLORAPP_CONTRAST;Contrast (J)
-!TP_COLORAPP_CONTRAST_Q;Contrast (Q)
-!TP_COLORAPP_CONTRAST_Q_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CONTRAST_TOOLTIP;Differs from L*a*b* and RGB contrast.
-!TP_COLORAPP_CURVEEDITOR1;Tone curve 1
-!TP_COLORAPP_CURVEEDITOR1_TOOLTIP;Shows the histogram of L* (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of J or Q after CIECAM02.\n\nJ and Q are not shown in the main histogram panel.\n\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_CURVEEDITOR2;Tone curve 2
-!TP_COLORAPP_CURVEEDITOR2_TOOLTIP;Same usage as with the second exposure tone curve.
-!TP_COLORAPP_CURVEEDITOR3;Color curve
-!TP_COLORAPP_CURVEEDITOR3_TOOLTIP;Adjust either chroma, saturation or colorfulness.\n\nShows the histogram of chromaticity (L*a*b*) before CIECAM02.\nIf the "Show CIECAM02 output histograms in curves" checkbox is enabled, shows the histogram of C, s or M after CIECAM02.\n\nC, s and M are not shown in the main histogram panel.\nFor final output refer to the main histogram panel.
-!TP_COLORAPP_DATACIE;CIECAM02 output histograms in curves
-!TP_COLORAPP_DATACIE_TOOLTIP;When enabled, histograms in CIECAM02 curves show approximate values/ranges for J or Q, and C, s or M after the CIECAM02 adjustments.\nThis selection does not impact the main histogram panel.\n\nWhen disabled, histograms in CIECAM02 curves show L*a*b* values before CIECAM02 adjustments.
-!TP_COLORAPP_FREE;Free temp+green + CAT02 + [output]
-!TP_COLORAPP_GAMUT;Gamut control (L*a*b*)
-!TP_COLORAPP_GAMUT_TOOLTIP;Allow gamut control in L*a*b* mode.
-!TP_COLORAPP_HUE;Hue (h)
-!TP_COLORAPP_HUE_TOOLTIP;Hue (h) - angle between 0° and 360°.
-!TP_COLORAPP_LABEL;CIE Color Appearance Model 2002
-!TP_COLORAPP_LABEL_CAM02;Image Adjustments
-!TP_COLORAPP_LABEL_SCENE;Scene Conditions
-!TP_COLORAPP_LABEL_VIEWING;Viewing Conditions
-!TP_COLORAPP_LIGHT;Lightness (J)
-!TP_COLORAPP_LIGHT_TOOLTIP;Lightness in CIECAM02 differs from L*a*b* and RGB lightness.
-!TP_COLORAPP_MEANLUMINANCE;Mean luminance (Yb%)
-!TP_COLORAPP_MODEL;WP Model
-!TP_COLORAPP_MODEL_TOOLTIP;White-Point Model.\n\nWB [RT] + [output]: RT's white balance is used for the scene, CIECAM02 is set to D50, and the output device's white balance is set in Viewing Conditions.\n\nWB [RT+CAT02] + [output]: RT's white balance settings are used by CAT02 and the output device's white balance is set in Viewing Conditions.\n\nFree temp+green + CAT02 + [output]: temp and green are selected by the user, the output device's white balance is set in Viewing Conditions.
-!TP_COLORAPP_NEUTRAL;Reset
-!TP_COLORAPP_NEUTRAL_TIP;Reset all sliders checkbox and curves to their default values
-!TP_COLORAPP_RSTPRO;Red & skin-tones protection
-!TP_COLORAPP_RSTPRO_TOOLTIP;Red & skin-tones protection affects both sliders and curves.
-!TP_COLORAPP_SURROUND;Surround
-!TP_COLORAPP_SURROUND_AVER;Average
-!TP_COLORAPP_SURROUND_DARK;Dark
-!TP_COLORAPP_SURROUND_DIM;Dim
-!TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
-!TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\nAverage: Average light environment (standard). The image will not change.\n\nDim: Dim environment (TV). The image will become slighty dark.\n\nDark: Dark environment (projector). The image will become more dark.\n\nExtremly Dark: Extremly dark environment (cutsheet). The image will become very dark.
-!TP_COLORAPP_SURSOURCE;Dark surround
-!TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
-!TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
-!TP_COLORAPP_TCMODE_CHROMA;Chroma
-!TP_COLORAPP_TCMODE_COLORF;Colorfulness
-!TP_COLORAPP_TCMODE_LABEL1;Curve mode 1
-!TP_COLORAPP_TCMODE_LABEL2;Curve mode 2
-!TP_COLORAPP_TCMODE_LABEL3;Curve chroma mode
-!TP_COLORAPP_TCMODE_LIGHTNESS;Lightness
-!TP_COLORAPP_TCMODE_SATUR;Saturation
-!TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD50 temp=5003\nD55 temp=5503\nD65 temp=6504\nD75 temp=7504
-!TP_COLORAPP_TONECIE;Tone mapping using CIECAM02
-!TP_COLORAPP_TONECIE_TOOLTIP;If this option is disabled, tone mapping is done in L*a*b* space.\nIf this option is enabled, tone mapping is done using CIECAM02.\nThe Tone Mapping tool must be enabled for this setting to take effect.
-!TP_COLORAPP_VIEWING_ABSOLUTELUMINANCE_TOOLTIP;Absolute luminance of the viewing environment\n(usually 16 cd/m²).
-!TP_COLORAPP_WBCAM;WB [RT+CAT02] + [output]
-!TP_COLORAPP_WBRT;WB [RT] + [output]
-!TP_COLORTONING_AB;o C/L
-!TP_COLORTONING_AUTOSAT;Automatic
-!TP_COLORTONING_BALANCE;Balance
-!TP_COLORTONING_BY;o C/L
-!TP_COLORTONING_CHROMAC;Opacity
-!TP_COLORTONING_COLOR;Color
-!TP_COLORTONING_CURVEEDITOR_CL_TOOLTIP;Chroma opacity as a function of luminance oC=f(L)
-!TP_COLORTONING_HIGHLIGHT;Highlights
-!TP_COLORTONING_HUE;Hue
-!TP_COLORTONING_LAB;L*a*b* blending
-!TP_COLORTONING_LABEL;Color Toning
-!TP_COLORTONING_LABGRID;L*a*b* color correction grid
-!TP_COLORTONING_LABGRID_VALUES;HL: a=%1 b=%2\nS: a=%3 b=%4
-!TP_COLORTONING_LABREGIONS;Color correction regions
-!TP_COLORTONING_LABREGION_ABVALUES;a=%1 b=%2
-!TP_COLORTONING_LABREGION_CHANNEL;Channel
-!TP_COLORTONING_LABREGION_CHANNEL_ALL;All
-!TP_COLORTONING_LABREGION_CHANNEL_B;Blue
-!TP_COLORTONING_LABREGION_CHANNEL_G;Green
-!TP_COLORTONING_LABREGION_CHANNEL_R;Red
-!TP_COLORTONING_LABREGION_CHROMATICITYMASK;C
-!TP_COLORTONING_LABREGION_HUEMASK;H
-!TP_COLORTONING_LABREGION_LIGHTNESS;Lightness
-!TP_COLORTONING_LABREGION_LIGHTNESSMASK;L
-!TP_COLORTONING_LABREGION_LIST_TITLE;Correction
-!TP_COLORTONING_LABREGION_MASK;Mask
-!TP_COLORTONING_LABREGION_MASKBLUR;Mask Blur
-!TP_COLORTONING_LABREGION_OFFSET;Offset
-!TP_COLORTONING_LABREGION_POWER;Power
-!TP_COLORTONING_LABREGION_SATURATION;Saturation
-!TP_COLORTONING_LABREGION_SHOWMASK;Show mask
-!TP_COLORTONING_LABREGION_SLOPE;Slope
-!TP_COLORTONING_LUMA;Luminance
-!TP_COLORTONING_LUMAMODE;Preserve luminance
-!TP_COLORTONING_LUMAMODE_TOOLTIP;If enabled, when you change color (red, green, cyan, blue, etc.) the luminance of each pixel is preserved.
-!TP_COLORTONING_METHOD;Method
-!TP_COLORTONING_METHOD_TOOLTIP;"L*a*b* blending", "RGB sliders" and "RGB curves" use interpolated color blending.\n"Color balance (Shadows/Midtones/Highlights)" and "Saturation 2 colors" use direct colors.\n\nThe Black-and-White tool can be enabled when using any color toning method, which allows for color toning.
-!TP_COLORTONING_MIDTONES;Midtones
-!TP_COLORTONING_NEUTRAL;Reset sliders
-!TP_COLORTONING_NEUTRAL_TIP;Reset all values (Shadows, Midtones, Highlights) to default.
-!TP_COLORTONING_OPACITY;Opacity
-!TP_COLORTONING_RGBCURVES;RGB - Curves
-!TP_COLORTONING_RGBSLIDERS;RGB - Sliders
-!TP_COLORTONING_SA;Saturation Protection
-!TP_COLORTONING_SATURATEDOPACITY;Strength
-!TP_COLORTONING_SATURATIONTHRESHOLD;Threshold
-!TP_COLORTONING_SHADOWS;Shadows
-!TP_COLORTONING_SPLITCO;Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITCOCO;Color Balance Shadows/Midtones/Highlights
-!TP_COLORTONING_SPLITLR;Saturation 2 colors
-!TP_COLORTONING_STR;Strength
-!TP_COLORTONING_STRENGTH;Strength
-!TP_COLORTONING_TWO2;Special chroma '2 colors'
-!TP_COLORTONING_TWOALL;Special chroma
-!TP_COLORTONING_TWOBY;Special a* and b*
-!TP_COLORTONING_TWOCOLOR_TOOLTIP;Standard chroma:\nLinear response, a* = b*.\n\nSpecial chroma:\nLinear response, a* = b*, but unbound - try under the diagonal.\n\nSpecial a* and b*:\nLinear response unbound with separate curves for a* and b*. Intended for special effects.\n\nSpecial chroma 2 colors:\nMore predictable.
-!TP_COLORTONING_TWOSTD;Standard chroma
-!TP_CROP_GTEPASSPORT;Biometric Passport
-!TP_CROP_GTFRAME;Frame
-!TP_CROP_GTGRID;Grid
-!TP_CROP_GTHARMMEANS;Harmonic Means
-!TP_CROP_GTTRIANGLE1;Golden Triangles 1
-!TP_CROP_GTTRIANGLE2;Golden Triangles 2
-!TP_CROP_PPI;PPI
-!TP_CROP_RESETCROP;Reset
-!TP_CROP_SELECTCROP;Select
-!TP_DARKFRAME_AUTOSELECT;Auto-selection
-!TP_DARKFRAME_LABEL;Dark-Frame
-!TP_DEFRINGE_LABEL;Defringe
-!TP_DEFRINGE_RADIUS;Radius
-!TP_DEFRINGE_THRESHOLD;Threshold
-!TP_DEHAZE_DEPTH;Depth
-!TP_DEHAZE_LABEL;Haze Removal
-!TP_DEHAZE_SHOW_DEPTH_MAP;Show depth map
-!TP_DEHAZE_STRENGTH;Strength
-!TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-!TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
-!TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
-!TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
-!TP_DIRPYRDENOISE_CHROMINANCE_FRAME;Chrominance
-!TP_DIRPYRDENOISE_CHROMINANCE_MANUAL;Manual
-!TP_DIRPYRDENOISE_CHROMINANCE_MASTER;Chrominance - Master
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD;Method
-!TP_DIRPYRDENOISE_CHROMINANCE_METHODADVANCED_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_METHOD_TOOLTIP;Manual\nActs on the full image.\nYou control the noise reduction settings manually.\n\nAutomatic global\nActs on the full image.\n9 zones are used to calculate a global chrominance noise reduction setting.\n\nAutomatic multi-zones\nNo preview - works only during saving, but using the "Preview" method by matching the tile size and center to the preview size and center you can get an idea of the expected results.\nThe image is divided into tiles (about 10 to 70 depending on image size) and each tile receives its own chrominance noise reduction settings.\n\nPreview\nActs on the whole image.\nThe part of the image visible in the preview is used to calculate global chrominance noise reduction settings.
-!TP_DIRPYRDENOISE_CHROMINANCE_PMZ;Preview multi-zones
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW;Preview
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEWRESIDUAL_INFO_TOOLTIP;Displays the remaining noise levels of the part of the image visible in the preview after wavelet.\n\n>300 Very noisy\n100-300 Noisy\n50-100 A little noisy\n<50 Very low noise\n\nBeware, the values will differ between RGB and L*a*b* mode. The RGB values are less accurate because the RGB mode does not completely separate luminance and chrominance.
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_INFO;Preview size=%1, Center: Px=%2 Py=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Preview noise: Mean=%1 High=%2
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= - High= -
-!TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2 Ty=%3
-!TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-!TP_DIRPYRDENOISE_ENH;Enhanced mode
-!TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
-!TP_DIRPYRDENOISE_LABEL;Noise Reduction
-!TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
-!TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
-!TP_DIRPYRDENOISE_LUMINANCE_DETAIL;Detail recovery
-!TP_DIRPYRDENOISE_LUMINANCE_FRAME;Luminance
-!TP_DIRPYRDENOISE_LUMINANCE_SMOOTHING;Luminance
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE;Color space
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_RGB;RGB
-!TP_DIRPYRDENOISE_MAIN_COLORSPACE_TOOLTIP;For raw images either RGB or L*a*b* methods can be used.\n\nFor non-raw images the L*a*b* method will be used, regardless of the selection.
-!TP_DIRPYRDENOISE_MAIN_GAMMA;Gamma
-!TP_DIRPYRDENOISE_MAIN_GAMMA_TOOLTIP;Gamma varies noise reduction strength across the range of tones. Smaller values will target shadows, while larger values will stretch the effect to the brighter tones.
-!TP_DIRPYRDENOISE_MAIN_MODE;Mode
-!TP_DIRPYRDENOISE_MAIN_MODE_AGGRESSIVE;Aggressive
-!TP_DIRPYRDENOISE_MAIN_MODE_CONSERVATIVE;Conservative
-!TP_DIRPYRDENOISE_MAIN_MODE_TOOLTIP;"Conservative" preserves low frequency chroma patterns, while "aggressive" obliterates them.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD;Median method
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_CHROMINANCE;Chroma only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LAB;L*a*b*
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LABEL;Median Filter
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_LUMINANCE;Luminance only
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_RGB;RGB
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_TOOLTIP;When using the "Luminance only" and "L*a*b*" methods, median filtering will be performed just after the wavelet step in the noise reduction pipeline.\nWhen using the "RGB" mode, it will be performed at the very end of the noise reduction pipeline.
-!TP_DIRPYRDENOISE_MEDIAN_METHOD_WEIGHTED;Weighted L* (little) + a*b* (normal)
-!TP_DIRPYRDENOISE_MEDIAN_PASSES;Median iterations
-!TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
-!TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
-!TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-!TP_DIRPYRDENOISE_SLI;Slider
-!TP_DIRPYRDENOISE_TYPE_3X3;3×3
-!TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
-!TP_DIRPYRDENOISE_TYPE_5X5;5×5
-!TP_DIRPYRDENOISE_TYPE_5X5SOFT;5×5 soft
-!TP_DIRPYRDENOISE_TYPE_7X7;7×7
-!TP_DIRPYRDENOISE_TYPE_9X9;9×9
-!TP_DIRPYREQUALIZER_ALGO;Skin Color Range
-!TP_DIRPYREQUALIZER_ALGO_TOOLTIP;Fine: closer to the colors of the skin, minimizing the action on other colors\nLarge: avoid more artifacts.
-!TP_DIRPYREQUALIZER_ARTIF;Reduce artifacts
-!TP_DIRPYREQUALIZER_HUESKIN;Skin hue
-!TP_DIRPYREQUALIZER_HUESKIN_TOOLTIP;This pyramid is for the upper part, so far as the algorithm at its maximum efficiency.\nTo the lower part, the transition zones.\nIf you need to move the area significantly to the left or right - or if there are artifacts: the white balance is incorrect\nYou can slightly reduce the zone to prevent the rest of the image is affected.
-!TP_DIRPYREQUALIZER_LABEL;Contrast by Detail Levels
-!TP_DIRPYREQUALIZER_LUMACOARSEST;Coarsest
-!TP_DIRPYREQUALIZER_LUMACONTRAST_MINUS;Contrast -
-!TP_DIRPYREQUALIZER_LUMACONTRAST_PLUS;Contrast +
-!TP_DIRPYREQUALIZER_LUMAFINEST;Finest
-!TP_DIRPYREQUALIZER_LUMANEUTRAL;Neutral
-!TP_DIRPYREQUALIZER_SKIN;Skin targetting/protection
-!TP_DIRPYREQUALIZER_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_DIRPYREQUALIZER_THRESHOLD;Threshold
-!TP_DIRPYREQUALIZER_TOOLTIP;Attempts to reduce artifacts in the transitions between skin colors (hue, chroma, luma) and the rest of the image.
-!TP_DISTORTION_AUTO_TIP;Automatically corrects lens distortion in raw files by matching it against the embedded JPEG image if one exists and has had its lens disortion auto-corrected by the camera.
-!TP_EPD_EDGESTOPPING;Edge stopping
-!TP_EPD_GAMMA;Gamma
-!TP_EPD_LABEL;Tone Mapping
-!TP_EPD_REWEIGHTINGITERATES;Reweighting iterates
-!TP_EPD_SCALE;Scale
-!TP_EPD_STRENGTH;Strength
-!TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
-!TP_EXPOSURE_CLAMPOOG;Clip out-of-gamut colors
-!TP_EXPOSURE_CLIP_TIP;The fraction of pixels to be clipped in Auto Levels operation.
-!TP_EXPOSURE_COMPRHIGHLIGHTSTHRESHOLD;Highlight compression threshold
-!TP_EXPOSURE_CURVEEDITOR1;Tone curve 1
-!TP_EXPOSURE_CURVEEDITOR2;Tone curve 2
-!TP_EXPOSURE_CURVEEDITOR2_TOOLTIP;Please refer to the "Exposure > Tone Curves" RawPedia article to learn how to achieve the best results by using two tone curves.
-!TP_EXPOSURE_HISTMATCHING;Auto-Matched Tone Curve
-!TP_EXPOSURE_HISTMATCHING_TOOLTIP;Automatically adjust sliders and curves (except exposure compensation) to match the look of the embedded JPEG thumbnail.
-!TP_EXPOSURE_SATURATION;Saturation
-!TP_EXPOSURE_TCMODE_FILMLIKE;Film-like
-!TP_EXPOSURE_TCMODE_LABEL1;Curve mode 1
-!TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2
-!TP_EXPOSURE_TCMODE_LUMINANCE;Luminance
-!TP_EXPOSURE_TCMODE_PERCEPTUAL;Perceptual
-!TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending
-!TP_EXPOSURE_TCMODE_STANDARD;Standard
-!TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard
-!TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points
-!TP_EXPOS_WHITEPOINT_LABEL;Raw White Points
-!TP_FILMSIMULATION_LABEL;Film Simulation
-!TP_FILMSIMULATION_SLOWPARSEDIR;RawTherapee is configured to look for Hald CLUT images, which are used for the Film Simulation tool, in a folder which is taking too long to load.\nGo to Preferences > Image Processing > Film Simulation\nto see which folder is being used. You should either point RawTherapee to a folder which contains only Hald CLUT images and nothing more, or to an empty folder if you don't want to use the Film Simulation tool.\n\nRead the Film Simulation article in RawPedia for more information.\n\nDo you want to cancel the scan now?
-!TP_FILMSIMULATION_STRENGTH;Strength
-!TP_FILMSIMULATION_ZEROCLUTSFOUND;Set HaldCLUT directory in Preferences
-!TP_FLATFIELD_AUTOSELECT;Auto-selection
-!TP_FLATFIELD_BLURRADIUS;Blur radius
-!TP_FLATFIELD_BLURTYPE;Blur type
-!TP_FLATFIELD_BT_AREA;Area
-!TP_FLATFIELD_BT_HORIZONTAL;Horizontal
-!TP_FLATFIELD_BT_VERTHORIZ;Vertical + Horizontal
-!TP_FLATFIELD_BT_VERTICAL;Vertical
-!TP_FLATFIELD_CLIPCONTROL;Clip control
-!TP_FLATFIELD_CLIPCONTROL_TOOLTIP;Clip control avoids clipped highlights caused by applying the flat field. If there are already clipped highlights before applying the flat field, clip control can lead to color cast.
-!TP_FLATFIELD_LABEL;Flat-Field
-!TP_GENERAL_11SCALE_TOOLTIP;The effects of this tool are only visible or only accurate at a preview scale of 1:1.
-!TP_GRADIENT_CENTER;Center
-!TP_GRADIENT_CENTER_X;Center X
-!TP_GRADIENT_CENTER_X_TOOLTIP;Shift gradient to the left (negative values) or right (positive values).
-!TP_GRADIENT_CENTER_Y;Center Y
-!TP_GRADIENT_CENTER_Y_TOOLTIP;Shift gradient up (negative values) or down (positive values).
-!TP_GRADIENT_DEGREE;Angle
-!TP_GRADIENT_DEGREE_TOOLTIP;Rotation angle in degrees.
-!TP_GRADIENT_FEATHER;Feather
-!TP_GRADIENT_FEATHER_TOOLTIP;Gradient width in percent of the image diagonal.
-!TP_GRADIENT_LABEL;Graduated Filter
-!TP_GRADIENT_STRENGTH;Strength
-!TP_GRADIENT_STRENGTH_TOOLTIP;Filter strength in stops.
-!TP_HLREC_BLEND;Blend
-!TP_HLREC_ENA_TOOLTIP;Could be activated by Auto Levels.
-!TP_HSVEQUALIZER_CHANNEL;Channel
-!TP_HSVEQUALIZER_HUE;H
-!TP_HSVEQUALIZER_LABEL;HSV Equalizer
-!TP_HSVEQUALIZER_SAT;S
-!TP_HSVEQUALIZER_VAL;V
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET;Baseline exposure
-!TP_ICM_APPLYBASELINEEXPOSUREOFFSET_TOOLTIP;Employ the embedded DCP baseline exposure offset. The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYHUESATMAP;Base table
-!TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
-!TP_ICM_APPLYLOOKTABLE;Look table
-!TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-!TP_ICM_BLENDCMSMATRIX;Blend ICC highlights with matrix
-!TP_ICM_BLENDCMSMATRIX_TOOLTIP;Enable to recover clipped highlights when using LUT-based ICC profiles.
-!TP_ICM_BPC;Black Point Compensation
-!TP_ICM_DCPILLUMINANT;Illuminant
-!TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
-!TP_ICM_DCPILLUMINANT_TOOLTIP;Select which embedded DCP illuminant to employ. Default is "interpolated" which is a mix between the two based on white balance. The setting is only available if a dual-illuminant DCP with interpolation support is selected.
-!TP_ICM_INPUTCAMERAICC;Auto-matched camera profile
-!TP_ICM_INPUTCAMERAICC_TOOLTIP;Use RawTherapee's camera-specific DCP or ICC input color profiles. These profiles are more precise than simpler matrix ones. They are not available for all cameras. These profiles are stored in the /iccprofiles/input and /dcpprofiles folders and are automatically retrieved based on a file name matching to the exact model name of the camera.
-!TP_ICM_INPUTCAMERA_TOOLTIP;Use a simple color matrix from dcraw, an enhanced RawTherapee version (whichever is available based on camera model) or one embedded in the DNG.
-!TP_ICM_INPUTCUSTOM_TOOLTIP;Select your own DCP/ICC color profile file for the camera.
-!TP_ICM_INPUTEMBEDDED_TOOLTIP;Use color profile embedded in non-raw files.
-!TP_ICM_INPUTNONE;No profile
-!TP_ICM_INPUTNONE_TOOLTIP;Use no input color profile at all.\nUse only in special cases.
-!TP_ICM_PROFILEINTENT;Rendering Intent
-!TP_ICM_SAVEREFERENCE;Save Reference Image
-!TP_ICM_SAVEREFERENCE_APPLYWB;Apply white balance
-!TP_ICM_SAVEREFERENCE_APPLYWB_TOOLTIP;Generally, apply the white balance when saving images to create ICC profiles, and do not apply the white balance to create DCP profiles.
-!TP_ICM_SAVEREFERENCE_TOOLTIP;Save the linear TIFF image before the input profile is applied. The result can be used for calibration purposes and generation of a camera profile.
-!TP_ICM_TONECURVE;Tone curve
-!TP_ICM_TONECURVE_TOOLTIP;Employ the embedded DCP tone curve. The setting is only available if the selected DCP has a tone curve.
-!TP_ICM_WORKING_TRC;Tone response curve:
-!TP_ICM_WORKING_TRC_CUSTOM;Custom
-!TP_ICM_WORKING_TRC_GAMMA;Gamma
-!TP_ICM_WORKING_TRC_NONE;None
-!TP_ICM_WORKING_TRC_SLOPE;Slope
-!TP_ICM_WORKING_TRC_TOOLTIP;Only for built-in profiles.
-!TP_IMPULSEDENOISE_LABEL;Impulse Noise Reduction
-!TP_IMPULSEDENOISE_THRESH;Threshold
-!TP_LABCURVE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_LABCURVE_AVOIDCOLORSHIFT_TOOLTIP;Fit colors into gamut of the working color space and apply Munsell correction.
-!TP_LABCURVE_BRIGHTNESS;Lightness
-!TP_LABCURVE_CHROMATICITY;Chromaticity
-!TP_LABCURVE_CHROMA_TOOLTIP;To apply B&W toning, set Chromaticity to -100.
-!TP_LABCURVE_CONTRAST;Contrast
-!TP_LABCURVE_CURVEEDITOR;Luminance Curve
-!TP_LABCURVE_CURVEEDITOR_A_RANGE1;Green Saturated
-!TP_LABCURVE_CURVEEDITOR_A_RANGE2;Green Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE3;Red Pastel
-!TP_LABCURVE_CURVEEDITOR_A_RANGE4;Red Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE1;Blue Saturated
-!TP_LABCURVE_CURVEEDITOR_B_RANGE2;Blue Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE3;Yellow Pastel
-!TP_LABCURVE_CURVEEDITOR_B_RANGE4;Yellow Saturated
-!TP_LABCURVE_CURVEEDITOR_CC;CC
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE1;Neutral
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE2;Dull
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE3;Pastel
-!TP_LABCURVE_CURVEEDITOR_CC_RANGE4;Saturated
-!TP_LABCURVE_CURVEEDITOR_CC_TOOLTIP;Chromaticity according to chromaticity C=f(C)
-!TP_LABCURVE_CURVEEDITOR_CH;CH
-!TP_LABCURVE_CURVEEDITOR_CH_TOOLTIP;Chromaticity according to hue C=f(H)
-!TP_LABCURVE_CURVEEDITOR_CL;CL
-!TP_LABCURVE_CURVEEDITOR_CL_TOOLTIP;Chromaticity according to luminance C=f(L)
-!TP_LABCURVE_CURVEEDITOR_HH;HH
-!TP_LABCURVE_CURVEEDITOR_HH_TOOLTIP;Hue according to hue H=f(H)
-!TP_LABCURVE_CURVEEDITOR_LC;LC
-!TP_LABCURVE_CURVEEDITOR_LC_TOOLTIP;Luminance according to chromaticity L=f(C)
-!TP_LABCURVE_CURVEEDITOR_LH;LH
-!TP_LABCURVE_CURVEEDITOR_LH_TOOLTIP;Luminance according to hue L=f(H)
-!TP_LABCURVE_CURVEEDITOR_LL_TOOLTIP;Luminance according to luminance L=f(L)
-!TP_LABCURVE_LABEL;L*a*b* Adjustments
-!TP_LABCURVE_LCREDSK;Restrict LC to red and skin-tones
-!TP_LABCURVE_LCREDSK_TIP;If enabled, the LC Curve affects only red and skin-tones.\nIf disabled, it applies to all tones.
-!TP_LABCURVE_RSTPROTECTION;Red and skin-tones protection
-!TP_LABCURVE_RSTPRO_TOOLTIP;Works on the Chromaticity slider and the CC curve.
-!TP_LENSGEOM_AUTOCROP;Auto-Crop
-!TP_LENSGEOM_FILL;Auto-fill
-!TP_LENSGEOM_LABEL;Lens / Geometry
-!TP_LENSPROFILE_CORRECTION_AUTOMATCH;Automatically selected
-!TP_LENSPROFILE_CORRECTION_LCPFILE;LCP file
-!TP_LENSPROFILE_CORRECTION_MANUAL;Manually selected
-!TP_LENSPROFILE_LABEL;Profiled Lens Correction
-!TP_LENSPROFILE_LENS_WARNING;Warning: the crop factor used for lens profiling is larger than the crop factor of the camera, the results might be wrong.
-!TP_LENSPROFILE_MODE_HEADER;Lens Profile
-!TP_LENSPROFILE_USE_CA;Chromatic aberration
-!TP_LENSPROFILE_USE_GEOMETRIC;Geometric distortion
-!TP_LENSPROFILE_USE_HEADER;Correct
-!TP_LENSPROFILE_USE_VIGNETTING;Vignetting
-!TP_LOCALCONTRAST_AMOUNT;Amount
-!TP_LOCALCONTRAST_DARKNESS;Darkness level
-!TP_LOCALCONTRAST_LABEL;Local Contrast
-!TP_LOCALCONTRAST_LIGHTNESS;Lightness level
-!TP_LOCALCONTRAST_RADIUS;Radius
-!TP_METADATA_EDIT;Apply modifications
-!TP_METADATA_MODE;Metadata copy mode
-!TP_METADATA_STRIP;Strip all metadata
-!TP_METADATA_TUNNEL;Copy unchanged
-!TP_NEUTRAL;Reset
-!TP_NEUTRAL_TIP;Resets exposure sliders to neutral values.\nApplies to the same controls that Auto Levels applies to, regardless of whether you used Auto Levels or not.
-!TP_PCVIGNETTE_FEATHER;Feather
-!TP_PCVIGNETTE_FEATHER_TOOLTIP;Feathering:\n0 = corners only,\n50 = halfway to center,\n100 = to center.
-!TP_PCVIGNETTE_LABEL;Vignette Filter
-!TP_PCVIGNETTE_ROUNDNESS;Roundness
-!TP_PCVIGNETTE_ROUNDNESS_TOOLTIP;Roundness:\n0 = rectangle,\n50 = fitted ellipse,\n100 = circle.
-!TP_PCVIGNETTE_STRENGTH;Strength
-!TP_PCVIGNETTE_STRENGTH_TOOLTIP;Filter strength in stops (reached in corners).
-!TP_PERSPECTIVE_HORIZONTAL;Horizontal
-!TP_PERSPECTIVE_LABEL;Perspective
-!TP_PERSPECTIVE_VERTICAL;Vertical
-!TP_PFCURVE_CURVEEDITOR_CH;Hue
-!TP_PFCURVE_CURVEEDITOR_CH_TOOLTIP;Controls defringe strength by color.\nHigher = more,\nLower = less.
-!TP_PREPROCESS_DEADPIXFILT;Dead pixel filter
-!TP_PREPROCESS_DEADPIXFILT_TOOLTIP;Tries to suppress dead pixels.
-!TP_PREPROCESS_GREENEQUIL;Green equilibration
-!TP_PREPROCESS_HOTPIXFILT;Hot pixel filter
-!TP_PREPROCESS_HOTPIXFILT_TOOLTIP;Tries to suppress hot pixels.
-!TP_PREPROCESS_LABEL;Preprocessing
-!TP_PREPROCESS_LINEDENOISE;Line noise filter
-!TP_PREPROCESS_LINEDENOISE_DIRECTION;Direction
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_BOTH;Both
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_HORIZONTAL;Horizontal
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_PDAF_LINES;Horizontal only on PDAF rows
-!TP_PREPROCESS_LINEDENOISE_DIRECTION_VERTICAL;Vertical
-!TP_PREPROCESS_NO_FOUND;None found
-!TP_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
-!TP_PRSHARPENING_LABEL;Post-Resize Sharpening
-!TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions.
-!TP_RAWCACORR_AUTO;Auto-correction
-!TP_RAWCACORR_AUTOIT;Iterations
-!TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is checked.\nAuto-correction is conservative, meaning that it often does not correct all chromatic aberration.\nTo correct the remaining chromatic aberration, you can use up to five iterations of automatic chromatic aberration correction.\nEach iteration will reduce the remaining chromatic aberration from the last iteration at the cost of additional processing time.
-!TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
-!TP_RAWCACORR_CABLUE;Blue
-!TP_RAWCACORR_CARED;Red
-!TP_RAWCACORR_CASTR;Strength
-!TP_RAWEXPOS_BLACKS;Black Levels
-!TP_RAWEXPOS_BLACK_0;Green 1 (lead)
-!TP_RAWEXPOS_BLACK_1;Red
-!TP_RAWEXPOS_BLACK_2;Blue
-!TP_RAWEXPOS_BLACK_3;Green 2
-!TP_RAWEXPOS_BLACK_BLUE;Blue
-!TP_RAWEXPOS_BLACK_GREEN;Green
-!TP_RAWEXPOS_BLACK_RED;Red
-!TP_RAWEXPOS_LINEAR;White-point correction
-!TP_RAWEXPOS_RGB;Red, Green, Blue
-!TP_RAWEXPOS_TWOGREEN;Link greens
-!TP_RAW_1PASSMEDIUM;1-pass (Markesteijn)
-!TP_RAW_2PASS;1-pass+fast
-!TP_RAW_3PASSBEST;3-pass (Markesteijn)
-!TP_RAW_4PASS;3-pass+fast
-!TP_RAW_AHD;AHD
-!TP_RAW_AMAZE;AMaZE
-!TP_RAW_AMAZEVNG4;AMaZE+VNG4
-!TP_RAW_BORDER;Border
-!TP_RAW_DCB;DCB
-!TP_RAW_DCBENHANCE;DCB enhancement
-!TP_RAW_DCBITERATIONS;Number of DCB iterations
-!TP_RAW_DCBVNG4;DCB+VNG4
-!TP_RAW_DMETHOD_PROGRESSBAR;%1 demosaicing...
-!TP_RAW_DMETHOD_PROGRESSBAR_REFINE;Demosaicing refinement...
-!TP_RAW_DMETHOD_TOOLTIP;Note: IGV and LMMSE are dedicated to high ISO images to aid in noise reduction without leading to maze patterns, posterization or a washed-out look.\nPixel Shift is for Pentax/Sony Pixel Shift files. It falls back to AMaZE for non-Pixel Shift files.
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST;Auto threshold
-!TP_RAW_DUALDEMOSAICAUTOCONTRAST_TOOLTIP;If the checkbox is checked (recommended), RawTherapee calculates an optimum value based on flat regions in the image.\nIf there is no flat region in the image or the image is too noisy, the value will be set to 0.\nTo set the value manually, uncheck the checkbox first (reasonable values depend on the image).
-!TP_RAW_DUALDEMOSAICCONTRAST;Contrast threshold
-!TP_RAW_EAHD;EAHD
-!TP_RAW_FAST;Fast
-!TP_RAW_HD;Threshold
-!TP_RAW_HD_TOOLTIP;Lower values make hot/dead pixel detection more aggressive, but false positives may lead to artifacts. If you notice any artifacts appearing when enabling the Hot/Dead Pixel Filters, gradually increase the threshold value until they disappear.
-!TP_RAW_HPHD;HPHD
-!TP_RAW_IGV;IGV
-!TP_RAW_IMAGENUM;Sub-image
-!TP_RAW_IMAGENUM_SN;SN mode
-!TP_RAW_IMAGENUM_TOOLTIP;Some raw files consist of several sub-images (Pentax/Sony Pixel Shift, Pentax 3-in-1 HDR, Canon Dual Pixel, Fuji EXR).\n\nWhen using any demosaicing method other than Pixel Shift, this selects which sub-image is used.\n\nWhen using the Pixel Shift demosaicing method on a Pixel Shift raw, all sub-images are used, and this selects which sub-image should be used for moving parts.
-!TP_RAW_LABEL;Demosaicing
-!TP_RAW_LMMSE;LMMSE
-!TP_RAW_LMMSEITERATIONS;LMMSE enhancement steps
-!TP_RAW_LMMSE_TOOLTIP;Adds gamma (step 1), median (steps 2-4) and refinement (steps 5-6) to reduce artifacts and improve the signal-to-noise ratio.
-!TP_RAW_MONO;Mono
-!TP_RAW_NONE;None (Shows sensor pattern)
-!TP_RAW_PIXELSHIFT;Pixel Shift
-!TP_RAW_PIXELSHIFTBLUR;Blur motion mask
-!TP_RAW_PIXELSHIFTDMETHOD;Demosaic method for motion
-!TP_RAW_PIXELSHIFTEPERISO;Sensitivity
-!TP_RAW_PIXELSHIFTEPERISO_TOOLTIP;The default value of 0 should work fine for base ISO.\nHigher values increase sensitivity of motion detection.\nChange in small steps and watch the motion mask while changing.\nIncrease sensitivity for underexposed or high ISO images.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT;Equalize brightness of frames
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL;Equalize per channel
-!TP_RAW_PIXELSHIFTEQUALBRIGHTCHANNEL_TOOLTIP;Enabled: Equalize the RGB channels individually.\nDisabled: Use same equalization factor for all channels.
-!TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to the brightness of the selected frame.\nIf there are overexposed areas in the frames select the brightest frame to avoid magenta color cast in overexposed areas or enable motion correction.
-!TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
-!TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-!TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-!TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
-!TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
-!TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
-!TP_RAW_PIXELSHIFTMM_AUTO;Automatic
-!TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
-!TP_RAW_PIXELSHIFTMM_OFF;Off
-!TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-!TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
-!TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
-!TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
-!TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY_TOOLTIP;Shows the motion mask without the image.
-!TP_RAW_PIXELSHIFTSHOWMOTION_TOOLTIP;Overlays the image with a green mask showing the regions with motion.
-!TP_RAW_PIXELSHIFTSIGMA;Blur radius
-!TP_RAW_PIXELSHIFTSIGMA_TOOLTIP;The default radius of 1.0 usually fits well for base ISO.\nIncrease the value for high ISO shots, 5.0 is a good starting point.\nWatch the motion mask while changing the value.
-!TP_RAW_PIXELSHIFTSMOOTH;Smooth transitions
-!TP_RAW_PIXELSHIFTSMOOTH_TOOLTIP;Smooth transitions between areas with motion and areas without.\nSet to 0 to disable transition smoothing.\nSet to 1 to either get the AMaZE/LMMSE result of the selected frame (depending on whether "Use LMMSE" is selected), or the median of all four frames if "Use median" is selected.
-!TP_RAW_RCD;RCD
-!TP_RAW_RCDVNG4;RCD+VNG4
-!TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer Matrix
-!TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images).\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.\n+fast gives less artifacts in flat areas
-!TP_RAW_SENSOR_XTRANS_LABEL;Sensor with X-Trans Matrix
-!TP_RAW_VNG4;VNG4
-!TP_RAW_XTRANS;X-Trans
-!TP_RAW_XTRANSFAST;Fast X-Trans
-!TP_RESIZE_ALLOW_UPSCALING;Allow Upscaling
-!TP_RESIZE_APPLIESTO;Applies to:
-!TP_RESIZE_CROPPEDAREA;Cropped Area
-!TP_RESIZE_FITBOX;Bounding Box
-!TP_RESIZE_FULLIMAGE;Full Image
-!TP_RESIZE_HEIGHT;Height
-!TP_RESIZE_LANCZOS;Lanczos
-!TP_RESIZE_SPECIFY;Specify:
-!TP_RESIZE_WIDTH;Width
-!TP_RETINEX_CONTEDIT_HSL;HSL histogram
-!TP_RETINEX_CONTEDIT_LAB;L*a*b* histogram
-!TP_RETINEX_CONTEDIT_LH;Hue
-!TP_RETINEX_CONTEDIT_MAP;Equalizer
-!TP_RETINEX_CURVEEDITOR_CD;L=f(L)
-!TP_RETINEX_CURVEEDITOR_CD_TOOLTIP;Luminance according to luminance L=f(L)\nCorrect raw data to reduce halos and artifacts.
-!TP_RETINEX_CURVEEDITOR_LH;Strength=f(H)
-!TP_RETINEX_CURVEEDITOR_LH_TOOLTIP;Strength according to hue Strength=f(H)\nThis curve also acts on chroma when using the "Highlight" retinex method.
-!TP_RETINEX_CURVEEDITOR_MAP;L=f(L)
-!TP_RETINEX_CURVEEDITOR_MAP_TOOLTIP;This curve can be applied alone or with a Gaussian mask or wavelet mask.\nBeware of artifacts!
-!TP_RETINEX_EQUAL;Equalizer
-!TP_RETINEX_FREEGAMMA;Free gamma
-!TP_RETINEX_GAIN;Gain
-!TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
-!TP_RETINEX_GAINTRANSMISSION;Gain transmission
-!TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-!TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
-!TP_RETINEX_GAMMA;Gamma
-!TP_RETINEX_GAMMA_FREE;Free
-!TP_RETINEX_GAMMA_HIGH;High
-!TP_RETINEX_GAMMA_LOW;Low
-!TP_RETINEX_GAMMA_MID;Middle
-!TP_RETINEX_GAMMA_NONE;None
-!TP_RETINEX_GAMMA_TOOLTIP;Restore tones by applying gamma before and after Retinex. Different from Retinex curves or others curves (Lab, Exposure, etc.).
-!TP_RETINEX_GRAD;Transmission gradient
-!TP_RETINEX_GRADS;Strength gradient
-!TP_RETINEX_GRADS_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Strength is reduced when iterations increase, and conversely.
-!TP_RETINEX_GRAD_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Variance and Threshold are reduced when iterations increase, and conversely.
-!TP_RETINEX_HIGH;High
-!TP_RETINEX_HIGHLIG;Highlight
-!TP_RETINEX_HIGHLIGHT;Highlight threshold
-!TP_RETINEX_HIGHLIGHT_TOOLTIP;Increase action of High algorithm.\nMay require you to re-adjust "Neighboring pixels" and to increase the "White-point correction" in the Raw tab -> Raw White Points tool.
-!TP_RETINEX_HSLSPACE_LIN;HSL-Linear
-!TP_RETINEX_HSLSPACE_LOG;HSL-Logarithmic
-!TP_RETINEX_ITER;Iterations (Tone-mapping)
-!TP_RETINEX_ITERF;Tone mapping
-!TP_RETINEX_ITER_TOOLTIP;Simulate a tone-mapping operator.\nHigh values increase the processing time.
-!TP_RETINEX_LABEL;Retinex
-!TP_RETINEX_LABEL_MASK;Mask
-!TP_RETINEX_LABSPACE;L*a*b*
-!TP_RETINEX_LOW;Low
-!TP_RETINEX_MAP;Method
-!TP_RETINEX_MAP_GAUS;Gaussian mask
-!TP_RETINEX_MAP_MAPP;Sharp mask (wavelet partial)
-!TP_RETINEX_MAP_MAPT;Sharp mask (wavelet total)
-!TP_RETINEX_MAP_METHOD_TOOLTIP;Use the mask generated by the Gaussian function above (Radius, Method) to reduce halos and artifacts.\n\nCurve only: apply a diagonal contrast curve on the mask.\nBeware of artifacts!\n\nGaussian mask: generate and use a Gaussian blur of the original mask.\nQuick.\n\nSharp mask: generate and use a wavelet on the original mask.\nSlow.
-!TP_RETINEX_MAP_NONE;None
-!TP_RETINEX_MEDIAN;Transmission median filter
-!TP_RETINEX_METHOD;Method
-!TP_RETINEX_METHOD_TOOLTIP;Low = Reinforce low light.\nUniform = Equalize action.\nHigh = Reinforce high light.\nHighlights = Remove magenta in highlights.
-!TP_RETINEX_MLABEL;Restored haze-free Min=%1 Max=%2
-!TP_RETINEX_MLABEL_TOOLTIP;Should be near min=0 max=32768\nRestored image with no mixture.
-!TP_RETINEX_NEIGHBOR;Radius
-!TP_RETINEX_NEUTRAL;Reset
-!TP_RETINEX_NEUTRAL_TIP;Reset all sliders and curves to their default values.
-!TP_RETINEX_OFFSET;Offset (brightness)
-!TP_RETINEX_SCALES;Gaussian gradient
-!TP_RETINEX_SCALES_TOOLTIP;If slider at 0, all iterations are identical.\nIf > 0 Scale and radius are reduced when iterations increase, and conversely.
-!TP_RETINEX_SETTINGS;Settings
-!TP_RETINEX_SKAL;Scale
-!TP_RETINEX_SLOPE;Free gamma slope
-!TP_RETINEX_STRENGTH;Strength
-!TP_RETINEX_THRESHOLD;Threshold
-!TP_RETINEX_THRESHOLD_TOOLTIP;Limits in/out.\nIn = image source,\nOut = image gauss.
-!TP_RETINEX_TLABEL;TM Min=%1 Max=%2 Mean=%3 Sigma=%4
-!TP_RETINEX_TLABEL2;TM Tm=%1 TM=%2
-!TP_RETINEX_TLABEL_TOOLTIP;Transmission map result.\nMin and Max are used by Variance.\nMean and Sigma.\nTm=Min TM=Max of transmission map.
-!TP_RETINEX_TRANF;Transmission
-!TP_RETINEX_TRANSMISSION;Transmission map
-!TP_RETINEX_TRANSMISSION_TOOLTIP;Transmission according to transmission.\nAbscissa: transmission from negative values (min), mean, and positives values (max).\nOrdinate: amplification or reduction.
-!TP_RETINEX_UNIFORM;Uniform
-!TP_RETINEX_VARIANCE;Contrast
-!TP_RETINEX_VARIANCE_TOOLTIP;Low variance increase local contrast and saturation, but can lead to artifacts.
-!TP_RETINEX_VIEW;Process
-!TP_RETINEX_VIEW_MASK;Mask
-!TP_RETINEX_VIEW_METHOD_TOOLTIP;Standard - Normal display.\nMask - Displays the mask.\nUnsharp mask - Displays the image with a high radius unsharp mask.\nTransmission - Auto/Fixed - Displays the file transmission-map, before any action on contrast and brightness.\n\nAttention: the mask does not correspond to reality, but is amplified to make it more visible.
-!TP_RETINEX_VIEW_NONE;Standard
-!TP_RETINEX_VIEW_TRAN;Transmission - Auto
-!TP_RETINEX_VIEW_TRAN2;Transmission - Fixed
-!TP_RETINEX_VIEW_UNSHARP;Unsharp mask
-!TP_RGBCURVES_BLUE;B
-!TP_RGBCURVES_CHANNEL;Channel
-!TP_RGBCURVES_GREEN;G
-!TP_RGBCURVES_LABEL;RGB Curves
-!TP_RGBCURVES_LUMAMODE;Luminosity mode
-!TP_RGBCURVES_LUMAMODE_TOOLTIP;Luminosity mode allows to vary the contribution of R, G and B channels to the luminosity of the image, without altering image color.
-!TP_RGBCURVES_RED;R
-!TP_SAVEDIALOG_OK_TIP;Shortcut: Ctrl-Enter
-!TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
-!TP_SHARPENEDGE_AMOUNT;Quantity
-!TP_SHARPENEDGE_LABEL;Edges
-!TP_SHARPENEDGE_PASSES;Iterations
-!TP_SHARPENEDGE_THREE;Luminance only
-!TP_SHARPENING_BLUR;Blur radius
-!TP_SHARPENING_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_AMOUNT;Quantity
-!TP_SHARPENMICRO_CONTRAST;Contrast threshold
-!TP_SHARPENMICRO_LABEL;Microcontrast
-!TP_SHARPENMICRO_MATRIX;3×3 matrix instead of 5×5
-!TP_SHARPENMICRO_UNIFORMITY;Uniformity
-!TP_SOFTLIGHT_LABEL;Soft Light
-!TP_SOFTLIGHT_STRENGTH;Strength
-!TP_TM_FATTAL_AMOUNT;Amount
-!TP_TM_FATTAL_ANCHOR;Anchor
-!TP_TM_FATTAL_LABEL;Dynamic Range Compression
-!TP_TM_FATTAL_THRESHOLD;Detail
-!TP_VIBRANCE_AVOIDCOLORSHIFT;Avoid color shift
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES;HH
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_LABEL;Skin-tones
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE1;Red/Purple
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE2;Red
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE3;Red/Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_RANGE4;Yellow
-!TP_VIBRANCE_CURVEEDITOR_SKINTONES_TOOLTIP;Hue according to hue H=f(H)
-!TP_VIBRANCE_LABEL;Vibrance
-!TP_VIBRANCE_PASTELS;Pastel Tones
-!TP_VIBRANCE_PASTSATTOG;Link pastel and saturated tones
-!TP_VIBRANCE_PROTECTSKINS;Protect skin-tones
-!TP_VIBRANCE_PSTHRESHOLD;Pastel/saturated tones threshold
-!TP_VIBRANCE_PSTHRESHOLD_SATTHRESH;Saturation threshold
-!TP_VIBRANCE_PSTHRESHOLD_TOOLTIP;The vertical axis represents pastel tones at the bottom and saturated tones at the top.\nThe horizontal axis represents the saturation range.
-!TP_VIBRANCE_PSTHRESHOLD_WEIGTHING;Pastel/saturated transition's weighting
-!TP_VIBRANCE_SATURATED;Saturated Tones
-!TP_VIGNETTING_CENTER;Center
-!TP_VIGNETTING_CENTER_X;Center X
-!TP_VIGNETTING_CENTER_Y;Center Y
-!TP_VIGNETTING_STRENGTH;Strength
-!TP_WAVELET_1;Level 1
-!TP_WAVELET_2;Level 2
-!TP_WAVELET_3;Level 3
-!TP_WAVELET_4;Level 4
-!TP_WAVELET_5;Level 5
-!TP_WAVELET_6;Level 6
-!TP_WAVELET_7;Level 7
-!TP_WAVELET_8;Level 8
-!TP_WAVELET_9;Level 9
-!TP_WAVELET_APPLYTO;Apply To
-!TP_WAVELET_AVOID;Avoid color shift
-!TP_WAVELET_B0;Black
-!TP_WAVELET_B1;Grey
-!TP_WAVELET_B2;Residual
-!TP_WAVELET_BACKGROUND;Background
-!TP_WAVELET_BACUR;Curve
-!TP_WAVELET_BALANCE;Contrast balance d/v-h
-!TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified.
-!TP_WAVELET_BALCHRO;Chroma balance
-!TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance.
-!TP_WAVELET_BANONE;None
-!TP_WAVELET_BASLI;Slider
-!TP_WAVELET_BATYPE;Contrast balance method
-!TP_WAVELET_CBENAB;Toning and Color Balance
-!TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted
-!TP_WAVELET_CCURVE;Local contrast
-!TP_WAVELET_CH1;Whole chroma range
-!TP_WAVELET_CH2;Saturated/pastel
-!TP_WAVELET_CH3;Link contrast levels
-!TP_WAVELET_CHCU;Curve
-!TP_WAVELET_CHR;Chroma-contrast link strength
-!TP_WAVELET_CHRO;Saturated/pastel threshold
-!TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored.
-!TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength"
-!TP_WAVELET_CHSL;Sliders
-!TP_WAVELET_CHTYPE;Chrominance method
-!TP_WAVELET_COLORT;Opacity Red-Green
-!TP_WAVELET_COMPCONT;Contrast
-!TP_WAVELET_COMPGAMMA;Compression gamma
-!TP_WAVELET_COMPGAMMA_TOOLTIP;Adjusting the gamma of the residual image allows you to equilibrate the data and histogram.
-!TP_WAVELET_COMPTM;Tone mapping
-!TP_WAVELET_CONTEDIT;'After' contrast curve
-!TP_WAVELET_CONTR;Gamut
-!TP_WAVELET_CONTRA;Contrast
-!TP_WAVELET_CONTRAST_MINUS;Contrast -
-!TP_WAVELET_CONTRAST_PLUS;Contrast +
-!TP_WAVELET_CONTRA_TOOLTIP;Changes contrast of the residual image.
-!TP_WAVELET_CTYPE;Chrominance control
-!TP_WAVELET_CURVEEDITOR_CC_TOOLTIP;Modifies local contrast as a function of the original local contrast (abscissa).\nLow abscissa values represent small local contrast (real values about 10..20).\n50% abscissa represents average local contrast (real value about 100..300).\n66% abscissa represents standard deviation of local contrast (real value about 300..800).\n100% abscissa represents maximum local contrast (real value about 3000..8000).
-!TP_WAVELET_CURVEEDITOR_CH;Contrast levels=f(Hue)
-!TP_WAVELET_CURVEEDITOR_CH_TOOLTIP;Modifies each level's contrast as a function of hue.\nTake care not to overwrite changes made with the Gamut sub-tool's hue controls.\nThe curve will only have an effect when wavelet contrast level sliders are non-zero.
-!TP_WAVELET_CURVEEDITOR_CL;L
-!TP_WAVELET_CURVEEDITOR_CL_TOOLTIP;Applies a final contrast luminance curve at the end of the wavelet treatment.
-!TP_WAVELET_CURVEEDITOR_HH;HH
-!TP_WAVELET_CURVEEDITOR_HH_TOOLTIP;Modifies the residual image's hue as a function of hue.
-!TP_WAVELET_DALL;All directions
-!TP_WAVELET_DAUB;Edge performance
-!TP_WAVELET_DAUB2;D2 - low
-!TP_WAVELET_DAUB4;D4 - standard
-!TP_WAVELET_DAUB6;D6 - standard plus
-!TP_WAVELET_DAUB10;D10 - medium
-!TP_WAVELET_DAUB14;D14 - high
-!TP_WAVELET_DAUB_TOOLTIP;Changes Daubechies coefficients:\nD4 = Standard,\nD14 = Often best performance, 10% more time-intensive.\n\nAffects edge detection as well as the general quality of the firsts levels. However the quality is not strictly related to this coefficient and can vary with images and uses.
-!TP_WAVELET_DONE;Vertical
-!TP_WAVELET_DTHR;Diagonal
-!TP_WAVELET_DTWO;Horizontal
-!TP_WAVELET_EDCU;Curve
-!TP_WAVELET_EDGCONT;Local contrast
-!TP_WAVELET_EDGCONT_TOOLTIP;Adjusting the points to the left decreases contrast, and to the right increases it.\nBottom-left, top-left, top-right and bottom-right represent respectively local contrast for low values, mean, mean+stdev and maxima.
-!TP_WAVELET_EDGE;Edge Sharpness
-!TP_WAVELET_EDGEAMPLI;Base amplification
-!TP_WAVELET_EDGEDETECT;Gradient sensitivity
-!TP_WAVELET_EDGEDETECTTHR;Threshold low (noise)
-!TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection)
-!TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky.
-!TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise.
-!TP_WAVELET_EDGESENSI;Edge sensitivity
-!TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
-!TP_WAVELET_EDGTHRESH;Detail
-!TP_WAVELET_EDGTHRESH_TOOLTIP;Change the repartition between the first levels and the others. The higher the threshold the more the action is centered on the first levels. Be careful with negative values, they increase the action of high levels and can introduce artifacts.
-!TP_WAVELET_EDRAD;Radius
-!TP_WAVELET_EDRAD_TOOLTIP;This radius adjustment is very different from those in other sharpening tools. Its value is compared to each level through a complex function. In this sense, a value of zero still has an effect.
-!TP_WAVELET_EDSL;Threshold Sliders
-!TP_WAVELET_EDTYPE;Local contrast method
-!TP_WAVELET_EDVAL;Strength
-!TP_WAVELET_FINAL;Final Touchup
-!TP_WAVELET_FINEST;Finest
-!TP_WAVELET_HIGHLIGHT;Highlight luminance range
-!TP_WAVELET_HS1;Whole luminance range
-!TP_WAVELET_HS2;Shadows/Highlights
-!TP_WAVELET_HUESKIN;Skin hue
-!TP_WAVELET_HUESKIN_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_HUESKY;Sky hue
-!TP_WAVELET_HUESKY_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the white balance is incorrect.
-!TP_WAVELET_ITER;Delta balance levels
-!TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight: reduce low levels and increase high levels.
-!TP_WAVELET_LABEL;Wavelet Levels
-!TP_WAVELET_LARGEST;Coarsest
-!TP_WAVELET_LEVCH;Chroma
-!TP_WAVELET_LEVDIR_ALL;All levels in all directions
-!TP_WAVELET_LEVDIR_INF;Below or equal the level
-!TP_WAVELET_LEVDIR_ONE;One level
-!TP_WAVELET_LEVDIR_SUP;Above the level
-!TP_WAVELET_LEVELS;Wavelet levels
-!TP_WAVELET_LEVELS_TOOLTIP;Choose the number of detail levels the image is to be decomposed into. More levels require more RAM and require a longer processing time.
-!TP_WAVELET_LEVF;Contrast
-!TP_WAVELET_LEVLABEL;Preview maximum possible levels = %1
-!TP_WAVELET_LEVONE;Level 2
-!TP_WAVELET_LEVTHRE;Level 4
-!TP_WAVELET_LEVTWO;Level 3
-!TP_WAVELET_LEVZERO;Level 1
-!TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength
-!TP_WAVELET_LIPST;Enhanced algoritm
-!TP_WAVELET_LOWLIGHT;Shadow luminance range
-!TP_WAVELET_MEDGREINF;First level
-!TP_WAVELET_MEDI;Reduce artifacts in blue sky
-!TP_WAVELET_MEDILEV;Edge detection
-!TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine.
-!TP_WAVELET_NEUTRAL;Neutral
-!TP_WAVELET_NOIS;Denoise
-!TP_WAVELET_NOISE;Denoise and Refine
-!TP_WAVELET_NPHIGH;High
-!TP_WAVELET_NPLOW;Low
-!TP_WAVELET_NPNONE;None
-!TP_WAVELET_NPTYPE;Neighboring pixels
-!TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced.
-!TP_WAVELET_OPACITY;Opacity Blue-Yellow
-!TP_WAVELET_OPACITYW;Contrast balance d/v-h curve
-!TP_WAVELET_OPACITYWL;Final local contrast
-!TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right.
-!TP_WAVELET_PASTEL;Pastel chroma
-!TP_WAVELET_PROC;Process
-!TP_WAVELET_RE1;Reinforced
-!TP_WAVELET_RE2;Unchanged
-!TP_WAVELET_RE3;Reduced
-!TP_WAVELET_RESCHRO;Chroma
-!TP_WAVELET_RESCON;Shadows
-!TP_WAVELET_RESCONH;Highlights
-!TP_WAVELET_RESID;Residual Image
-!TP_WAVELET_SAT;Saturated chroma
-!TP_WAVELET_SETTINGS;Wavelet Settings
-!TP_WAVELET_SKIN;Skin targetting/protection
-!TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
-!TP_WAVELET_SKY;Sky targetting/protection
-!TP_WAVELET_SKY_TOOLTIP;At -100 sky-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 sky-tones are protected while all other tones are affected.
-!TP_WAVELET_STREN;Strength
-!TP_WAVELET_STRENGTH;Strength
-!TP_WAVELET_SUPE;Extra
-!TP_WAVELET_THR;Shadows threshold
-!TP_WAVELET_THRESHOLD;Highlight levels
-!TP_WAVELET_THRESHOLD2;Shadow levels
-!TP_WAVELET_THRESHOLD2_TOOLTIP;Only levels between 9 and 9 minus the value will be affected by the shadow luminance range. Other levels will be fully treated. The highest level possible is limited by the highlight level value (9 minus highlight level value).
-!TP_WAVELET_THRESHOLD_TOOLTIP;Only levels beyond the chosen value will be affected by the highlight luminance range. Other levels will be fully treated. The chosen value here limits the highest possible value of the shadow levels.
-!TP_WAVELET_THRH;Highlights threshold
-!TP_WAVELET_TILESBIG;Big tiles
-!TP_WAVELET_TILESFULL;Full image
-!TP_WAVELET_TILESIZE;Tiling method
-!TP_WAVELET_TILESLIT;Little tiles
-!TP_WAVELET_TILES_TOOLTIP;Processing the full image leads to better quality and is the recommended option, while using tiles is a fall-back solution for users with little RAM. Refer to RawPedia for memory requirements.
-!TP_WAVELET_TMSTRENGTH;Compression strength
-!TP_WAVELET_TMSTRENGTH_TOOLTIP;Control the strength of tone mapping or contrast compression of the residual image. When the value is different from 0, the Strength and Gamma sliders of the Tone Mapping tool in the Exposure tab will become grayed out.
-!TP_WAVELET_TMTYPE;Compression method
-!TP_WAVELET_TON;Toning
-!TP_WBALANCE_CLOUDY;Cloudy
-!TP_WBALANCE_DAYLIGHT;Daylight (sunny)
-!TP_WBALANCE_EQBLUERED;Blue/Red equalizer
-!TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behavior of "white balance" by modulating the blue/red balance.\nThis can be useful when shooting conditions:\na) are far from the standard illuminant (e.g. underwater),\nb) are far from conditions where calibrations were performed,\nc) where the matrices or ICC profiles are unsuitable.
-!TP_WBALANCE_FLASH55;Leica
-!TP_WBALANCE_FLASH60;Standard, Canon, Pentax, Olympus
-!TP_WBALANCE_FLASH65;Nikon, Panasonic, Sony, Minolta
-!TP_WBALANCE_FLASH_HEADER;Flash
-!TP_WBALANCE_FLUO1;F1 - Daylight
-!TP_WBALANCE_FLUO2;F2 - Cool White
-!TP_WBALANCE_FLUO3;F3 - White
-!TP_WBALANCE_FLUO4;F4 - Warm White
-!TP_WBALANCE_FLUO5;F5 - Daylight
-!TP_WBALANCE_FLUO6;F6 - Lite White
-!TP_WBALANCE_FLUO7;F7 - D65 Daylight Simulator
-!TP_WBALANCE_FLUO8;F8 - D50 / Sylvania F40 Design
-!TP_WBALANCE_FLUO9;F9 - Cool White Deluxe
-!TP_WBALANCE_FLUO10;F10 - Philips TL85
-!TP_WBALANCE_FLUO11;F11 - Philips TL84
-!TP_WBALANCE_FLUO12;F12 - Philips TL83
-!TP_WBALANCE_FLUO_HEADER;Fluorescent
-!TP_WBALANCE_GTI;GTI
-!TP_WBALANCE_HMI;HMI
-!TP_WBALANCE_JUDGEIII;JudgeIII
-!TP_WBALANCE_LAMP_HEADER;Lamp
-!TP_WBALANCE_LED_CRS;CRS SP12 WWMR16
-!TP_WBALANCE_LED_HEADER;LED
-!TP_WBALANCE_LED_LSI;LSI Lumelex 2040
-!TP_WBALANCE_PICKER;Pick
-!TP_WBALANCE_SHADE;Shade
-!TP_WBALANCE_SOLUX35;Solux 3500K
-!TP_WBALANCE_SOLUX41;Solux 4100K
-!TP_WBALANCE_SOLUX47;Solux 4700K (vendor)
-!TP_WBALANCE_SOLUX47_NG;Solux 4700K (Nat. Gallery)
-!TP_WBALANCE_TEMPBIAS;AWB temperature bias
-!TP_WBALANCE_TEMPBIAS_TOOLTIP;Allows to alter the computation of the "auto white balance"\nby biasing it towards warmer or cooler temperatures. The bias\nis expressed as a percentage of the computed temperature,\nso that the result is given by "computedTemp + computedTemp * bias".
-!TP_WBALANCE_TUNGSTEN;Tungsten
-!TP_WBALANCE_WATER1;UnderWater 1
-!TP_WBALANCE_WATER2;UnderWater 2
-!TP_WBALANCE_WATER_HEADER;UnderWater
-!ZOOMPANEL_100;(100%)
-!ZOOMPANEL_NEWCROPWINDOW;Open (new) detail window
-!ZOOMPANEL_ZOOM100;Zoom to 100%\nShortcut: z
-!ZOOMPANEL_ZOOMFITCROPSCREEN;Fit crop to screen\nShortcut: f
-!ZOOMPANEL_ZOOMFITSCREEN;Fit whole image to screen\nShortcut: Alt-f
-!ZOOMPANEL_ZOOMIN;Zoom In\nShortcut: +
-!ZOOMPANEL_ZOOMOUT;Zoom Out\nShortcut: -
diff --git a/rtdata/languages/default b/rtdata/languages/default
index 50aff37a6..65c504835 100644
--- a/rtdata/languages/default
+++ b/rtdata/languages/default
@@ -99,7 +99,6 @@ EXPORT_BYPASS_RAW_LMMSE_ITERATIONS;Bypass [raw] LMMSE Enhancement Steps
EXPORT_BYPASS_SHARPENEDGE;Bypass Edge Sharpening
EXPORT_BYPASS_SHARPENING;Bypass Sharpening
EXPORT_BYPASS_SHARPENMICRO;Bypass Microcontrast
-EXPORT_BYPASS_SH_HQ;Bypass Sharp Mask Shadows/Highlights
EXPORT_FASTEXPORTOPTIONS;Fast Export Options
EXPORT_INSTRUCTIONS;Fast Export options provide overrides to bypass time and resource consuming development settings and to run queue processing using the fast export settings instead. This method is recommended for quicker generation of lower resolution images when speed is a priority or when resized output is desired for one or many images without making modifications to their saved development parameters.
EXPORT_MAXHEIGHT;Maximum height:
@@ -112,7 +111,6 @@ EXPORT_USE_FAST_PIPELINE_TIP;Use a dedicated processing pipeline for images in F
EXPORT_USE_NORMAL_PIPELINE;Standard (bypass some steps, resize at the end)
EXTPROGTARGET_1;raw
EXTPROGTARGET_2;queue-processed
-FILEBROWSER_ADDDELTEMPLATE;Add/Del templates...
FILEBROWSER_APPLYPROFILE;Apply
FILEBROWSER_APPLYPROFILE_PARTIAL;Apply - partial
FILEBROWSER_AUTODARKFRAME;Auto dark-frame
@@ -1239,7 +1237,6 @@ PREFERENCES_BEHADDALLHINT;Set all parameters to the Add mode.\nAdjustment
PREFERENCES_BEHAVIOR;Behavior
PREFERENCES_BEHSETALL;All to 'Set'
PREFERENCES_BEHSETALLHINT;Set all parameters to the Set mode.\nAdjustments of parameters in the batch tool panel will be absolute, the actual values will be displayed.
-PREFERENCES_BLACKBODY;Tungsten
PREFERENCES_CACHECLEAR;Clear
PREFERENCES_CACHECLEAR_ALL;Clear all cached files:
PREFERENCES_CACHECLEAR_ALLBUTPROFILES;Clear all cached files except for cached processing profiles:
@@ -1276,11 +1273,6 @@ PREFERENCES_CUSTPROFBUILDKEYFORMAT;Keys format
PREFERENCES_CUSTPROFBUILDKEYFORMAT_NAME;Name
PREFERENCES_CUSTPROFBUILDKEYFORMAT_TID;TagID
PREFERENCES_CUSTPROFBUILDPATH;Executable path
-PREFERENCES_D50;Settings in main menu
-PREFERENCES_D50_OLD;5000K
-PREFERENCES_D55;5500K
-PREFERENCES_D60;6000K
-PREFERENCES_D65;6500K
PREFERENCES_DARKFRAMEFOUND;Found
PREFERENCES_DARKFRAMESHOTS;shots
PREFERENCES_DARKFRAMETEMPLATES;templates
@@ -1303,32 +1295,15 @@ PREFERENCES_FLATFIELDFOUND;Found
PREFERENCES_FLATFIELDSDIR;Flat-fields directory
PREFERENCES_FLATFIELDSHOTS;shots
PREFERENCES_FLATFIELDTEMPLATES;templates
-PREFERENCES_FLUOF2;Fluorescent F2
-PREFERENCES_FLUOF7;Fluorescent F7
-PREFERENCES_FLUOF11;Fluorescent F11
PREFERENCES_FORIMAGE;For non-raw photos
PREFERENCES_FORRAW;For raw photos
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT;Same thumbnail height between the Filmstrip and the File Browser
PREFERENCES_FSTRIP_SAME_THUMB_HEIGHT_HINT;Having separate thumbnail size will require more processing time each time you'll switch between the single Editor tab and the File Browser.
PREFERENCES_GIMPPATH;GIMP installation directory
-PREFERENCES_GREY;Output device's Yb luminance (%)
-PREFERENCES_GREY05;Yb=05 CIE L#30
-PREFERENCES_GREY10;Yb=10 CIE L#40
-PREFERENCES_GREY15;Yb=15 CIE L#45
-PREFERENCES_GREY18;Settings in main menu
-PREFERENCES_GREY18_OLD;Yb=18 CIE L#50
-PREFERENCES_GREY23;Yb=23 CIE L#55
-PREFERENCES_GREY30;Yb=30 CIE L#60
-PREFERENCES_GREY40;Yb=40 CIE L#70
-PREFERENCES_GREYSC;Scene Yb luminance (%)
-PREFERENCES_GREYSC18;Yb=18 CIE L#50
-PREFERENCES_GREYSCA;Automatic
PREFERENCES_HISTOGRAMPOSITIONLEFT;Histogram in left panel
-PREFERENCES_HISTOGRAMWORKING;Use working profile for main histogram and Navigator
PREFERENCES_HISTOGRAM_TOOLTIP;If enabled, the working profile is used for rendering the main histogram and the Navigator panel, otherwise the gamma-corrected output profile is used.
PREFERENCES_HLTHRESHOLD;Threshold for clipped highlights
PREFERENCES_ICCDIR;Directory containing color profiles
-PREFERENCES_IMG_RELOAD_NEEDED;These changes require the image to be reloaded (or a new image to be opened) to take effect.
PREFERENCES_IMPROCPARAMS;Default Processing Profile
PREFERENCES_INSPECT_LABEL;Inspect
PREFERENCES_INSPECT_MAXBUFFERS_LABEL;Maximum number of cached images
@@ -1347,7 +1322,6 @@ PREFERENCES_MENUGROUPLABEL;Group "Color label"
PREFERENCES_MENUGROUPPROFILEOPERATIONS;Group "Processing profile operations"
PREFERENCES_MENUGROUPRANK;Group "Rank"
PREFERENCES_MENUOPTIONS;Context Menu Options
-PREFERENCES_METADATA;Metadata
PREFERENCES_MONINTENT;Default rendering intent
PREFERENCES_MONITOR;Monitor
PREFERENCES_MONPROFILE;Default color profile
@@ -1425,9 +1399,7 @@ PREFERENCES_THUMBNAIL_INSPECTOR_RAW;Neutral raw rendering
PREFERENCES_THUMBNAIL_INSPECTOR_RAW_IF_NO_JPEG_FULLSIZE;Embedded JPEG if fullsize, neutral raw otherwise
PREFERENCES_TP_LABEL;Tool panel:
PREFERENCES_TP_VSCROLLBAR;Hide vertical scrollbar
-PREFERENCES_TUNNELMETADATA;Copy Exif/IPTC/XMP unchanged to output file
PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-PREFERENCES_VIEW;Output device's white balance (monitor, TV, projector, viewing, etc.)
PREFERENCES_WORKFLOW;Layout
PROFILEPANEL_COPYPPASTE;Parameters to copy
PROFILEPANEL_GLOBALPROFILES;Bundled profiles
@@ -1642,8 +1614,6 @@ TP_COLORAPP_SURROUND_DARK;Dark
TP_COLORAPP_SURROUND_DIM;Dim
TP_COLORAPP_SURROUND_EXDARK;Extremly Dark (Cutsheet)
TP_COLORAPP_SURROUND_TOOLTIP;Changes tones and colors to take into account the viewing conditions of the output device.\n\nAverage: Average light environment (standard). The image will not change.\n\nDim: Dim environment (TV). The image will become slighty dark.\n\nDark: Dark environment (projector). The image will become more dark.\n\nExtremly Dark: Extremly dark environment (cutsheet). The image will become very dark.
-TP_COLORAPP_SURSOURCE;Dark surround
-TP_COLORAPP_SURSOURCE_TOOLTIP;Can be used if image has a dark border.
TP_COLORAPP_TCMODE_BRIGHTNESS;Brightness
TP_COLORAPP_TCMODE_CHROMA;Chroma
TP_COLORAPP_TCMODE_COLORF;Colorfulness
@@ -1745,7 +1715,6 @@ TP_DEHAZE_SHOW_DEPTH_MAP;Show depth map
TP_DEHAZE_STRENGTH;Strength
TP_DIRPYRDENOISE_CHROMINANCE_AMZ;Auto multi-zones
TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL;Automatic global
-TP_DIRPYRDENOISE_CHROMINANCE_AUTOGLOBAL_TOOLTIP;Try to evaluate chroma noise\nBe careful, this calculation is average, and is quite subjective !
TP_DIRPYRDENOISE_CHROMINANCE_BLUEYELLOW;Chrominance - Blue-Yellow
TP_DIRPYRDENOISE_CHROMINANCE_CURVE;Chrominance curve
TP_DIRPYRDENOISE_CHROMINANCE_CURVE_TOOLTIP;Increase (multiply) the value of all chrominance sliders.\nThis curve lets you adjust the strength of chromatic noise reduction as a function of chromaticity, for instance to increase the action in areas of low saturation and to decrease it in those of high saturation.
@@ -1763,8 +1732,6 @@ TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO;Preview noise: Mean=%1 High=%2
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_NOISEINFO_EMPTY;Preview noise: Mean= - High= -
TP_DIRPYRDENOISE_CHROMINANCE_PREVIEW_TILEINFO;Tile size=%1, Center: Tx=%2 Ty=%3
TP_DIRPYRDENOISE_CHROMINANCE_REDGREEN;Chrominance - Red-Green
-TP_DIRPYRDENOISE_ENH;Enhanced mode
-TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
TP_DIRPYRDENOISE_LABEL;Noise Reduction
TP_DIRPYRDENOISE_LUMINANCE_CONTROL;Luminance control
TP_DIRPYRDENOISE_LUMINANCE_CURVE;Luminance curve
@@ -1793,7 +1760,6 @@ TP_DIRPYRDENOISE_MEDIAN_PASSES;Median iterations
TP_DIRPYRDENOISE_MEDIAN_PASSES_TOOLTIP;Applying three median filter iterations with a 3×3 window size often leads to better results than using one median filter iteration with a 7×7 window size.
TP_DIRPYRDENOISE_MEDIAN_TYPE;Median type
TP_DIRPYRDENOISE_MEDIAN_TYPE_TOOLTIP;Apply a median filter of the desired window size. The larger the window's size, the longer it takes.\n\n3×3 soft: treats 5 pixels in a 3×3 pixel window.\n3×3: treats 9 pixels in a 3×3 pixel window.\n5×5 soft: treats 13 pixels in a 5×5 pixel window.\n5×5: treats 25 pixels in a 5×5 pixel window.\n7×7: treats 49 pixels in a 7×7 pixel window.\n9×9: treats 81 pixels in a 9×9 pixel window.\n\nSometimes it is possible to achieve higher quality running several iterations with a smaller window size than one iteration with a larger one.
-TP_DIRPYRDENOISE_SLI;Slider
TP_DIRPYRDENOISE_TYPE_3X3;3×3
TP_DIRPYRDENOISE_TYPE_3X3SOFT;3×3 soft
TP_DIRPYRDENOISE_TYPE_5X5;5×5
@@ -1898,8 +1864,6 @@ TP_ICM_APPLYHUESATMAP;Base table
TP_ICM_APPLYHUESATMAP_TOOLTIP;Employ the embedded DCP base table (HueSatMap). The setting is only available if the selected DCP has one.
TP_ICM_APPLYLOOKTABLE;Look table
TP_ICM_APPLYLOOKTABLE_TOOLTIP;Employ the embedded DCP look table. The setting is only available if the selected DCP has one.
-TP_ICM_BLENDCMSMATRIX;Blend ICC highlights with matrix
-TP_ICM_BLENDCMSMATRIX_TOOLTIP;Enable to recover clipped highlights when using LUT-based ICC profiles.
TP_ICM_BPC;Black Point Compensation
TP_ICM_DCPILLUMINANT;Illuminant
TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated
@@ -2200,7 +2164,6 @@ TP_RAWCACORR_AUTOIT_TOOLTIP;This setting is available if "Auto-correction" is ch
TP_RAWCACORR_AVOIDCOLORSHIFT;Avoid color shift
TP_RAWCACORR_CABLUE;Blue
TP_RAWCACORR_CARED;Red
-TP_RAWCACORR_CASTR;Strength
TP_RAWEXPOS_BLACKS;Black Levels
TP_RAWEXPOS_BLACK_0;Green 1 (lead)
TP_RAWEXPOS_BLACK_1;Red
@@ -2259,15 +2222,12 @@ TP_RAW_PIXELSHIFTEQUALBRIGHT_TOOLTIP;Equalize the brightness of the frames to th
TP_RAW_PIXELSHIFTGREEN;Check green channel for motion
TP_RAW_PIXELSHIFTHOLEFILL;Fill holes in motion mask
TP_RAW_PIXELSHIFTHOLEFILL_TOOLTIP;Fill holes in motion mask
-TP_RAW_PIXELSHIFTLMMSE;Use LMMSE for moving parts
-TP_RAW_PIXELSHIFTLMMSE_TOOLTIP;Use LMMSE instead of AMaZE for areas of motion.\nUseful for high ISO images.
TP_RAW_PIXELSHIFTMEDIAN;Use median for moving parts
TP_RAW_PIXELSHIFTMEDIAN_TOOLTIP;Use median of all frames instead of selected frame for regions with motion.\nRemoves objects which are at different places in all frames.\nGives motion effect on slow moving (overlapping) objects.
TP_RAW_PIXELSHIFTMM_AUTO;Automatic
TP_RAW_PIXELSHIFTMM_CUSTOM;Custom
TP_RAW_PIXELSHIFTMM_OFF;Off
TP_RAW_PIXELSHIFTMOTIONMETHOD;Motion Correction
-TP_RAW_PIXELSHIFTMOTION_TOOLTIP;0 means no motion detection.\n1 - 99 means motion will be detected according to this value. Increase value to increase detection rate.\n100 means the AMaZE-demosaiced frame will be used.
TP_RAW_PIXELSHIFTNONGREENCROSS;Check red/blue channels for motion
TP_RAW_PIXELSHIFTSHOWMOTION;Show motion mask
TP_RAW_PIXELSHIFTSHOWMOTIONMASKONLY;Show only motion mask
@@ -2316,7 +2276,6 @@ TP_RETINEX_GAIN;Gain
TP_RETINEX_GAINOFFS;Gain and Offset (brightness)
TP_RETINEX_GAINTRANSMISSION;Gain transmission
TP_RETINEX_GAINTRANSMISSION_TOOLTIP;Amplify or reduce the transmission map to achieve the desired luminance.\nThe x-axis is the transmission.\nThe y-axis is the gain.
-TP_RETINEX_GAIN_TOOLTIP;Acts on the restored image.\n\nThis is very different from the others settings. Used for black or white pixels, and to help balance the histogram.
TP_RETINEX_GAMMA;Gamma
TP_RETINEX_GAMMA_FREE;Free
TP_RETINEX_GAMMA_HIGH;High
@@ -2394,10 +2353,8 @@ TP_SAVEDIALOG_OK_TIP;Shortcut: Ctrl-Enter
TP_SHADOWSHLIGHTS_HIGHLIGHTS;Highlights
TP_SHADOWSHLIGHTS_HLTONALW;Highlights tonal width
TP_SHADOWSHLIGHTS_LABEL;Shadows/Highlights
-TP_SHADOWSHLIGHTS_LOCALCONTR;Local contrast
TP_SHADOWSHLIGHTS_RADIUS;Radius
TP_SHADOWSHLIGHTS_SHADOWS;Shadows
-TP_SHADOWSHLIGHTS_SHARPMASK;Sharp mask
TP_SHADOWSHLIGHTS_SHTONALW;Shadows tonal width
TP_SHARPENEDGE_AMOUNT;Quantity
TP_SHARPENEDGE_LABEL;Edges
diff --git a/rtengine/imagedata.cc b/rtengine/imagedata.cc
index 036634a18..123d2adb7 100644
--- a/rtengine/imagedata.cc
+++ b/rtengine/imagedata.cc
@@ -268,7 +268,7 @@ FrameData::FrameData(rtexif::TagDirectory* frameRootDir_, rtexif::TagDirectory*
iso_speed = tag->toDouble();
}
- if ((tag = exif->getTag("DateTimeOriginal"))) {
+ if ((tag = exif->findTag("DateTimeOriginal", true))) {
if (sscanf((const char*)tag->getValue(), "%d:%d:%d %d:%d:%d", &time.tm_year, &time.tm_mon, &time.tm_mday, &time.tm_hour, &time.tm_min, &time.tm_sec) == 6) {
time.tm_year -= 1900;
time.tm_mon -= 1;
diff --git a/rtexif/nikonattribs.cc b/rtexif/nikonattribs.cc
index a1fa28c34..b2066150d 100644
--- a/rtexif/nikonattribs.cc
+++ b/rtexif/nikonattribs.cc
@@ -1148,7 +1148,26 @@ const std::map NALensDataInterpreter::lenses = {
{"FE 53 5C 80 24 24 84 06", "Tamron SP AF 70-200mm f/2.8 Di LD (IF) Macro (A001)"},
{"FE 54 5C 80 24 24 DF 0E", "Tamron SP 70-200mm f/2.8 Di VC USD (A009)"},
{"FE 54 64 64 24 24 DF 0E", "Tamron SP 90mm f/2.8 Di VC USD Macro 1:1 (F004)"},
- {"FF 40 2D 80 2C 40 4B 06", "Sigma 18-200mm f/3.5-6.3 DC"}
+ {"FF 40 2D 80 2C 40 4B 06", "Sigma 18-200mm f/3.5-6.3 DC"},
+
+ // There are cases where one lens uses multiple IDs which change based on the focal length or aperture.
+ // These IDs cannot be listed using ExifTool, and so must be entered manually below.
+ // #4135
+
+ {"92 2B 2D 88 2C 40 4B 0E", "Sigma 18-250mm f/3.5-6.3 DC Macro OS HSM"}, // (210mm)
+ {"92 2C 2D 88 2C 40 4B 0E", "Sigma 18-250mm f/3.5-6.3 DC Macro OS HSM"}, // (185mm)
+ {"92 2D 2D 88 2C 40 4B 0E", "Sigma 18-250mm f/3.5-6.3 DC Macro OS HSM"}, // (155mm)
+ {"92 2E 2D 88 2C 40 4B 0E", "Sigma 18-250mm f/3.5-6.3 DC Macro OS HSM"}, // (130mm)
+ {"92 2F 2D 88 2C 40 4B 0E", "Sigma 18-250mm f/3.5-6.3 DC Macro OS HSM"}, // (105mm)
+ {"92 30 2D 88 2C 40 4B 0E", "Sigma 18-250mm f/3.5-6.3 DC Macro OS HSM"}, // (90mm)
+ {"92 32 2D 88 2C 40 4B 0E", "Sigma 18-250mm f/3.5-6.3 DC Macro OS HSM"}, // (75mm)
+ {"92 33 2D 88 2C 40 4B 0E", "Sigma 18-250mm f/3.5-6.3 DC Macro OS HSM"}, // (62mm)
+ {"92 35 2D 88 2C 40 4B 0E", "Sigma 18-250mm f/3.5-6.3 DC Macro OS HSM"}, // (52mm)
+ {"92 37 2D 88 2C 40 4B 0E", "Sigma 18-250mm f/3.5-6.3 DC Macro OS HSM"}, // (44mm)
+ {"92 39 2D 88 2C 40 4B 0E", "Sigma 18-250mm f/3.5-6.3 DC Macro OS HSM"}, // (38mm)
+ {"92 3A 2D 88 2C 40 4B 0E", "Sigma 18-250mm f/3.5-6.3 DC Macro OS HSM"}, // (32mm)
+ {"92 3E 2D 88 2C 40 4B 0E", "Sigma 18-250mm f/3.5-6.3 DC Macro OS HSM"}, // (22mm)
+ {"92 40 2D 88 2C 40 4B 0E", "Sigma 18-250mm f/3.5-6.3 DC Macro OS HSM"} // (18mm)
};
const TagAttrib nikonISOInfoAttribs[] = {
diff --git a/rtgui/CMakeLists.txt b/rtgui/CMakeLists.txt
index c81d031da..165f30d8a 100644
--- a/rtgui/CMakeLists.txt
+++ b/rtgui/CMakeLists.txt
@@ -124,8 +124,8 @@ set(NONCLISOURCEFILES
rgbcurves.cc
rotate.cc
rtimage.cc
- rtsurface.cc
- rtscalable.cc
+ rtsurface.cc
+ rtscalable.cc
rtwindow.cc
saveasdlg.cc
saveformatpanel.cc
diff --git a/rtgui/bayerpreprocess.cc b/rtgui/bayerpreprocess.cc
index 4910b2798..44be0d047 100644
--- a/rtgui/bayerpreprocess.cc
+++ b/rtgui/bayerpreprocess.cc
@@ -124,7 +124,7 @@ void BayerPreProcess::write(rtengine::procparams::ProcParams* pp, ParamsEdited*
if (pedited) {
pedited->raw.bayersensor.linenoise = lineDenoise->getEditedState();
pedited->raw.bayersensor.greenEq = greenEqThreshold->getEditedState();
- pedited->raw.bayersensor.linenoise = lineDenoiseDirection->get_active_row_number() != 3;
+ pedited->raw.bayersensor.linenoiseDirection = lineDenoiseDirection->get_active_row_number() != 3;
pedited->raw.bayersensor.pdafLinesFilter = !pdafLinesFilter->get_inconsistent();
}
}
diff --git a/rtgui/filebrowser.cc b/rtgui/filebrowser.cc
index dd21dcf20..a91fa209d 100644
--- a/rtgui/filebrowser.cc
+++ b/rtgui/filebrowser.cc
@@ -1780,7 +1780,7 @@ void FileBrowser::openNextImage()
// scroll only when selected[0] is outside of the displayed bounds
// or less than a thumbnail's width from either edge.
- if ((x2 > x1 + ww - 2 * tw) || (x2 - tw < x1)) {
+ if ((x2 > x1 + ww - 1.5 * tw) || (x2 - tw / 2 < x1)) {
setScrollPosition(x2 - (ww - tw) / 2, y2);
}
@@ -1843,7 +1843,7 @@ void FileBrowser::openPrevImage()
// scroll only when selected[0] is outside of the displayed bounds
// or less than a thumbnail's width from either edge.
- if ((x2 > x1 + ww - 2 * tw) || (x2 - tw < x1)) {
+ if ((x2 > x1 + ww - 1.5 * tw) || (x2 - tw / 2 < x1)) {
setScrollPosition(x2 - (ww - tw) / 2, y2);
}
diff --git a/rtgui/hsvequalizer.cc b/rtgui/hsvequalizer.cc
index 7db76aa9f..f489696d2 100644
--- a/rtgui/hsvequalizer.cc
+++ b/rtgui/hsvequalizer.cc
@@ -109,7 +109,7 @@ void HSVEqualizer::autoOpenCurve ()
bool active = hshape->openIfNonlinear();
if (!active) {
- sshape->openIfNonlinear();
+ active = sshape->openIfNonlinear();
}
if (!active) {
diff --git a/rtgui/labcurve.cc b/rtgui/labcurve.cc
index 13ea00b74..f458fa717 100644
--- a/rtgui/labcurve.cc
+++ b/rtgui/labcurve.cc
@@ -299,31 +299,31 @@ void LCurve::autoOpenCurve ()
bool active = lshape->openIfNonlinear();
if (!active) {
- ashape->openIfNonlinear();
+ active = ashape->openIfNonlinear();
}
if (!active) {
- bshape->openIfNonlinear();
+ active = bshape->openIfNonlinear();
}
if (!active) {
- ccshape->openIfNonlinear();
+ active = ccshape->openIfNonlinear();
}
if (!active) {
- chshape->openIfNonlinear();
+ active = chshape->openIfNonlinear();
}
if (!active) {
- lhshape->openIfNonlinear();
+ active = lhshape->openIfNonlinear();
}
if (!active) {
- hhshape->openIfNonlinear();
+ active = hhshape->openIfNonlinear();
}
if (!active) {
- lcshape->openIfNonlinear();
+ active = lcshape->openIfNonlinear();
}
if (!active) {
diff --git a/rtgui/rgbcurves.cc b/rtgui/rgbcurves.cc
index 75af43508..560ee7e57 100644
--- a/rtgui/rgbcurves.cc
+++ b/rtgui/rgbcurves.cc
@@ -117,7 +117,7 @@ void RGBCurves::autoOpenCurve ()
bool active = Rshape->openIfNonlinear();
if (!active) {
- Gshape->openIfNonlinear();
+ active = Gshape->openIfNonlinear();
}
if (!active) {
diff --git a/tools/generateTranslationDiffs b/tools/generateTranslationDiffs
index 8eff0adb7..45b43098c 100755
--- a/tools/generateTranslationDiffs
+++ b/tools/generateTranslationDiffs
@@ -15,49 +15,55 @@
#
# Locale files are generated automatically:
# - English (UK)
-# - Polish (Latin Characters)
tmp=temp_file
if [[ -w $tmp ]]; then
- rm -v "$tmp"
+ rm -v "$tmp"
fi
abort () {
- printf "%s\n" "" "Aborting"
- rm -v "$tmp"
- exit 1
+ printf "%s\n" "" "Aborting"
+ rm -v "$tmp"
+ exit 1
}
trap 'abort' HUP INT QUIT ABRT TERM
-
cd "rtdata/languages" || { printf "%s\n" "You must run this script from the root of the project."; exit 1; }
# Build array of all interface translation files, or use user-specified ones only
unset langFiles
+
if [[ $# = 0 ]]; then
- while read -r; do
- langFiles+=("$REPLY")
- done < <(find . -not -iname "default" -not -iname "LICENSE" -not -iname "README" -not -iname "*.sh" -not -iname ".*" -not -iname "$tmp" -not -iname "English (UK)" -not -iname "Polish (Latin Characters)" | sort)
+ while read -r; do
+ langFiles+=("$REPLY")
+ done < <(find . -not -iname "default" \
+ -not -iname "LICENSE" \
+ -not -iname "README" \
+ -not -iname "*.sh" \
+ -not -iname ".*" \
+ -not -iname "$tmp" \
+ -not -iname "English (UK)" \
+ | sort)
else
- langFiles=("$@")
- for langFile in "${langFiles[@]}"; do
- if [[ ! -w $langFile ]]; then
- printf "%s\n" "File \"$langFile\" not found or not writable." ""
- exit 1
- fi
- done
+ langFiles=("$@")
+ for langFile in "${langFiles[@]}"; do
+ if [[ ! -w $langFile ]]; then
+ printf "%s\n" "File \"$langFile\" not found or not writable." ""
+ exit 1
+ fi
+ done
fi
getComments () {
- grep -E "^#.+" "$1" | sort -Vu
+ grep -E "^#.+" "$1" | sort -Vu
}
getChanged () {
- grep -Ev '^(!|#|$)' "$1" | sort -Vu -t ';' --key=1,1
+ grep -Ev '^(!|#|$)' "$1" | sort -Vu -t ';' --key=1,1
}
getUnchanged () {
- grep -E "^\!.+" "$1" | sort -Vu -t ';' --key=1,1
+ grep -E "^\!.+" "$1" | sort -Vu -t ';' --key=1,1
}
# First thing, fix default, so move comments to front, then strip the rest of any "!" and duplicates.
@@ -70,31 +76,31 @@ i=1
printf "%s\n" "Digging through ${#langFiles[@]} file(s). This may take a while."
ttot1="$(date +%s)"
for file in "${langFiles[@]}"; do
- t1="$(date +%s)"
- printf "%02d - ${file#.*/}" "$i"
- dos2unix "$file" 2>/dev/null
- unset newLines
+ t1="$(date +%s)"
+ printf "%02d - ${file#.*/}" "$i"
+ dos2unix "$file" 2>/dev/null
+ unset newLines
# KEY;String
# Match "default" keys with those in current translation file. If no match, add !KEY;String
while read -r 'defLine'; do
- defKey="${defLine%%;*}"
- if ! grep -q "^${defKey}\;" "$file"; then
- newLines+=("!${defLine}")
- fi
+ defKey="${defLine%%;*}"
+ if ! grep -q "^${defKey}\;" "$file"; then
+ newLines+=("!${defLine}")
+ fi
done < <(getChanged default)
# Form final translation file
# Start with comments
if [[ -n "$(getComments "$file")" ]]; then
- printf "%s\n" "$(getComments "$file")" "" >> "$tmp"
+ printf "%s\n" "$(getComments "$file")" "" >> "$tmp"
fi
# Add already-translated lines
getChanged "$file" >> "$tmp"
printf '%s\n' "" >> "$tmp"
# End with new, untranslated lines
if [[ -n "${newLines[@]}" ]]; then
- printf "%s\n" "!!!!!!!!!!!!!!!!!!!!!!!!!" "! Untranslated keys follow; remove the ! prefix after an entry is translated." "!!!!!!!!!!!!!!!!!!!!!!!!!" "" "${newLines[@]}" >> "$tmp"
+ printf "%s\n" "!!!!!!!!!!!!!!!!!!!!!!!!!" "! Untranslated keys follow; remove the ! prefix after an entry is translated." "!!!!!!!!!!!!!!!!!!!!!!!!!" "" "${newLines[@]}" >> "$tmp"
fi
mv "$tmp" "$file"
t2="$(date +%s)"
@@ -104,21 +110,20 @@ for file in "${langFiles[@]}"; do
done
case "${langFiles[@]}" in
- *"./English (US)"*) printf "%s\n" "Creating English (UK) file"
- getComments "English (US)" > "English (UK)"
- grep -Ei ".+;.*(color|behavior|center).*" default | \
- sed -e '/^#/d' -e 'h;s/^[^;]*;//; s/olor/olour/g; x;s/;.*//;G;s/\n/;/' \
- -e 'h;s/^[^;]*;//; s/ehavior/ehaviour/g; x;s/;.*//;G;s/\n/;/' \
- -e 'h;s/^[^;]*;//; s/center/centre/g; x;s/;.*//;G;s/\n/;/' \
- -e 'h;s/^[^;]*;//; s/Center/Centre/g; x;s/;.*//;G;s/\n/;/' >> English\ \(UK\)
- grep -Evi ".+;.*(color|behavior|center).*" "English (US)" | grep -Ev "^#" >> "English (UK)"
- ;;&
- *"./Polish"*) printf "%s\n" "Creating Polish (Latin Characters) file"
- sed 'y/ĄĆĘŁŃÓŚŹŻąćęłńóśźż/ACELNOSZZacelnoszz/' < Polish > "Polish (Latin Characters)"
- ;;&
+ *"./English (US)"*) printf "%s\n" "Creating English (UK) file"
+ getComments "English (US)" > "English (UK)"
+ grep -Ei ".+;.*(color|behavior|center).*" default | \
+ sed -e '/^#/d' -e 'h;s/^[^;]*;//; s/olor/olour/g; x;s/;.*//;G;s/\n/;/' \
+ -e 'h;s/^[^;]*;//; s/ehavior/ehaviour/g; x;s/;.*//;G;s/\n/;/' \
+ -e 'h;s/^[^;]*;//; s/center/centre/g; x;s/;.*//;G;s/\n/;/' \
+ -e 'h;s/^[^;]*;//; s/Center/Centre/g; x;s/;.*//;G;s/\n/;/' >> English\ \(UK\)
+ grep -Evi ".+;.*(color|behavior|center).*" "English (US)" | grep -Ev "^#" >> "English (UK)"
+ ;;&
esac
+
ttot2="$(date +%s)"
ttot=$((ttot2-ttot1))
tsec=$((ttot%60))
tmin=$((ttot/60))
+
printf "%s\n" "Finished updating ${#langFiles[@]} files." "Total time: ${tmin}m ${tsec}s"
diff --git a/tools/generateUnusedKeys b/tools/generateUnusedKeys
index 484da3667..6d2b68390 100755
--- a/tools/generateUnusedKeys
+++ b/tools/generateUnusedKeys
@@ -1,20 +1,20 @@
#!/usr/bin/env bash
+# This script is part of RawTherapee.
+#
# This Bash4 script checks whether each key in "default" is used in
# a .cc or .h file. Those that are not are printed to screen, and the
# user is asked if they should be deleted from all language files.
#
-# Keys in commented-out sections are treated as if they weren't there.
-# The following comment styles are handled:
-# // key
-# /* key
-# key */
-
-# It does not handle dynamically built keys:
+# Keys in commented-out sections "//" are ignored.
+#
+# Some concatenated keys are ignored, these need to be added to the list manually:
# HISTORY_MSG_
# EXTPROGTARGET_
# FILEBROWSER_POPUPRANK
# FILEBROWSER_POPUPCOLORLABEL
+# SAMPLEFORMAT_
+# TP_RAW_[demosaic_method]
#
# The script can also clean up already-translated files by removing keys which
# do not exist in default.
@@ -22,11 +22,10 @@
# Run the script from the project root:
# ./tools/generateUnusedKeys
#
-# Doublecheck the deletion before committing.
# Run ./tools/generateTranslationDiffs before and after running this script.
+# Double-check the deletion before committing.
#
# Blame DrSlony
-# Please report bugs or enhancements to http://code.google.com/p/rawtherapee/issues/list
tmp=temp_file
if [[ -w $tmp ]]; then
@@ -61,26 +60,41 @@ fi
dos2unix default 2>/dev/null
+# In the code block below, the grep/sed outside the loop lists keys to ignore.
+# Exit status 1 (failure) means key not found in code, destined for deletion.
+# The piped grep inside the loop checks the initial match for known comment markers "//".
+# Sometimes a key is first found in a comment, and then the same key is found
+# in active code, therefore -m1 (stop reading after 1st match) cannot be used.
+# To remove comment support, remove the piped grep and set first grep flags to
+# -Irl -m1
+# Dynamically built keys like HISTORY_MSG_1 can't be grepped in the code,
+# so it renames KEY_1-KEY_9 to KEY_ so that they can be grepped and therefore ignored.
t1="$(date +%s)"
printf '%s\n' 'Matching keys in "default" against .cc and .h files' 'Unmatched keys follow:'
unset delLines
while read -r 'defLine'; do
- grep -Ir --include=\*.{cc,h} --exclude-dir="klt" "${defLine%%;*}" ../../* | grep -Ev "//.*${defLine%%;*}|/\*.*${defLine%%;*}|${defLine%%;*}.*\*/" &>/dev/null
+ grep -Ir --include=\*.{cc,h} --exclude-dir="klt" "${defLine%%;*}" ../../* | grep -Ev "//.*${defLine%%;*}" &>/dev/null
if [[ $? = 1 ]]; then
printf ' %s\n' "${defLine%%;*}"
delLines+=("${defLine%%;*}")
fi
-done < <(grep -Ev "^(#|$)|HISTORY_MSG_" "default" | sed -e "s/EXTPROGTARGET_[0-9]*/EXTPROGTARGET_/" -e "s/FILEBROWSER_POPUPCOLORLABEL[0-9]*/FILEBROWSER_POPUPCOLORLABEL/" -e "s/FILEBROWSER_POPUPRANK[0-9]*/FILEBROWSER_POPUPRANK/" | sort -Vu)
-# The grep/sed line above lists keys to ignore. Exit status 1 (failure) means
-# key not found in code, destined for deletion. The piped grep in the loop
-# checks the initial match for known comment markers // /* and */
-# Sometimes a key is first found in a comment, and then the same key is found
-# in active code, therefore -m1 (stop reading after 1st match) cannot be used.
-# To remove comment support, remove the piped grep and set first grep flags to
-# -Irl -m1
-# Dynamically built keys like HISTORY_MSG_1 can't be grepped in the code,
-# so it renames KEY_1-KEY_9 to KEY_ so that they can be grepped and therefore ignored.
-# The piped grep in the loop
+done < <( \
+ grep -Ev -e "^(#|$)|HISTORY_MSG_" \
+ -e "^(#|$)|TP_RAW_1PASSMEDIUM" \
+ -e "^(#|$)|TP_RAW_2PASS" \
+ -e "^(#|$)|TP_RAW_3PASSBEST" \
+ -e "^(#|$)|TP_RAW_4PASS" \
+ -e "^(#|$)|TP_RAW_AMAZEVNG4" \
+ -e "^(#|$)|TP_RAW_DCBVNG4" \
+ -e "^(#|$)|TP_RAW_MONO" \
+ -e "^(#|$)|TP_RAW_NONE" \
+ -e "^(#|$)|TP_RAW_RCDVNG4" \
+ "default" | \
+ sed -e "s/EXTPROGTARGET_[0-9]*/EXTPROGTARGET_/" \
+ -e "s/FILEBROWSER_POPUPCOLORLABEL[0-9]*/FILEBROWSER_POPUPCOLORLABEL/" \
+ -e "s/FILEBROWSER_POPUPRANK[0-9]*/FILEBROWSER_POPUPRANK/" \
+ -e "s/SAMPLEFORMAT_[0-9]*/SAMPLEFORMAT_/" \
+ | sort -Vu)
t2="$(date +%s)"
tt=$((t2-t1))
printf '%s\n' "" "Scan took $tt seconds" "" "Double-checking the code for matched keys:"