Local adjustments - denoise improvments (#6705)
* Init improvment LA denoise * First display luma chroma residual noise * Clean code denoise iplocallab.cc * Change windows.yml with old version january 2023 * Clean code - change calculation denoise - GUI * Improve labels tooltip denoise * Clean code * Change tooltip * Set auto denoise - main - chroma auto to 50% when LA denoise is used * Change GUI denoise with expanders * Change labels * Change reference remianing noise in percentage * Change tooltip and labels * Change values in preview remaining noise * Clean comment code - chnage tooltips * Change windows.yml and appimage.yml publish_pre_dev labels * Update windows.yml * Restore windows.yml * Restore windows.yml and clean code * Revert change Noise Reduction link with Local denoise * Revert all changes on Noise-reduction linked with Local adjustments
This commit is contained in:
@@ -2839,13 +2839,15 @@ TP_LOCALLAB_DENOIMASK;Denoise chroma mask
|
||||
TP_LOCALLAB_DENOIMASK_TOOLTIP;For all tools, allows you to control the chromatic noise level of the mask.\nUseful for better control of chrominance and to avoid artifacts when using the LC(h) curve.
|
||||
TP_LOCALLAB_DENOIQUA_TOOLTIP;Conservative mode preserves low frequency detail. Aggressive mode removes low frequency detail.\nConservative and Aggressive modes use wavelets and DCT and can be used in conjunction with 'Non-local Means – Luminance'.
|
||||
TP_LOCALLAB_DENOITHR_TOOLTIP;Adjusts edge detection to help reduce noise in uniform, low-contrast areas.
|
||||
TP_LOCALLAB_DENOIWAVCH;Wavelets: Chrominance
|
||||
TP_LOCALLAB_DENOIWAVLUM;Wavelets: Luminance
|
||||
TP_LOCALLAB_DENOI_EXP;Denoise
|
||||
TP_LOCALLAB_DENOI_TOOLTIP;This module can be used for noise reduction either on its own (at the end of the processing pipeline) or in addition to the Noise Reduction module in the Detail tab (which works at the beginning of the pipeline).\n Scope allows you to differentiate the action based on color (ΔE).\nMinimum RT-spot size: 128x128.
|
||||
TP_LOCALLAB_DEPTH;Depth
|
||||
TP_LOCALLAB_DETAIL;Local contrast
|
||||
TP_LOCALLAB_DETAILFRA;Edge detection - DCT
|
||||
TP_LOCALLAB_DETAILSH;Details
|
||||
TP_LOCALLAB_DETAILTHR;Luma-chro detail threshold
|
||||
TP_LOCALLAB_DETAILTHR;Lum/chrom detail threshold
|
||||
TP_LOCALLAB_DIVGR;Gamma
|
||||
TP_LOCALLAB_DUPLSPOTNAME;Copy
|
||||
TP_LOCALLAB_EDGFRA;Edge sharpness
|
||||
@@ -3110,7 +3112,7 @@ TP_LOCALLAB_MASKLCTHRLOW;Dark area luminance threshold
|
||||
TP_LOCALLAB_MASKLCTHRLOW2;Dark area luma threshold
|
||||
TP_LOCALLAB_MASKLCTHRMID;Gray area luma denoise
|
||||
TP_LOCALLAB_MASKLCTHRMIDCH;Gray area chroma denoise
|
||||
TP_LOCALLAB_MASKLC_TOOLTIP;This allows you to target the denoise based on the image luminance information contained in the L(L) or LC(H) mask (Mask and Modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n 'Dark area luminance threshold'. If 'Reinforce denoise in dark and light areas' > 1 the denoise is progressively increased from 0% at the threshold setting to 100% at the maximum black value (determined by mask).\n 'Light area luminance threshold'. The denoise is progressively decreased from 100% at the threshold setting to 0% at the maximum white value (determined by mask).\n In the area between the two thresholds, the denoise settings are not affected by the mask.
|
||||
TP_LOCALLAB_MASKLC_TOOLTIP;Used by wavelet luminance.\nThis allows you to target the denoise based on the image luminance information contained in the L(L) or LC(H) mask (Mask and Modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n 'Dark area luminance threshold'. If 'Reinforce denoise in dark and light areas' > 1 the denoise is progressively increased from 0% at the threshold setting to 100% at the maximum black value (determined by mask).\n 'Light area luminance threshold'. The denoise is progressively decreased from 100% at the threshold setting to 0% at the maximum white value (determined by mask).\n In the area between the two thresholds, the denoise settings are not affected by the mask.
|
||||
TP_LOCALLAB_MASKLNOISELOW;Reinforce dark/light areas
|
||||
TP_LOCALLAB_MASKLOWTHRESCB_TOOLTIP;Dark-tone limit below which the CBDL parameters (Luminance only) will be restored progressively to their original values prior to being modified by the CBDL settings.\n You can use certain tools in 'Mask and modifications' to change the gray levels: 'Smooth radius', Gamma and Slope, 'Contrast curve'.\n Use a 'lockable color picker' on the mask to see which areas will be affected. Make sure you set 'Background color mask' = 0 in Settings.
|
||||
TP_LOCALLAB_MASKLOWTHRESC_TOOLTIP;Dark-tone limit below which the parameters will be restored progressively to their original values prior to being modified by the Color and Light settings.\n You can use certain tools in 'Mask and modifications' to change the gray levels: 'Structure mask', 'blur mask', 'Smooth radius', Gamma and Slope, 'Contrast curve', 'Local contrast' (wavelets).\n Use a 'lockable color picker' on the mask to see which areas will be affected. Make sure you set 'Background color mask' = 0 in Settings.
|
||||
@@ -3169,6 +3171,12 @@ TP_LOCALLAB_MERTHR;Difference
|
||||
TP_LOCALLAB_MERTWE;Exclusion
|
||||
TP_LOCALLAB_MERTWO;Subtract
|
||||
TP_LOCALLAB_METHOD_TOOLTIP;'Enhanced + chroma denoise' significantly increases processing times.\nBut reduce artifacts.
|
||||
TP_LOCALLAB_LCLABELS;Residual noise levels
|
||||
TP_LOCALLAB_LCLABELS_TOOLTIP;Displays the mean and high-end noise values for the area shown in the Preview Panel (at 100% zoom). The noise values are grouped by wavelet levels 0,1,2,3 and 4,5,6.\nThe displayed values are indicative only and are designed to assist with denoise adjustments. They should not be interpreted as absolute noise levels.\n\n 300: Very noisy\n 100-300: Noisy\n 50-100: Moderatly noisy\n < 50: Low noise\n\nThey allow you to see:\n*The impact of Noise Reduction in the main-menu Detail tab.\n*The influence of Non-local Means, Wavelets and DCT on the luminance noise.\n*The influence of Wavelets and DCT on the chroma noise.\n*The influence of Capture Sharpening and Demosaicing.
|
||||
TP_LOCALLAB_LUMLABEL;Luma levels 0123: Mean=%1 High=%2
|
||||
TP_LOCALLAB_LUM46LABEL;Luma levels 456: Mean=%1 High=%2
|
||||
TP_LOCALLAB_CHROLABEL;Chroma levels 0123: Mean=%1 High=%2
|
||||
TP_LOCALLAB_CHRO46LABEL;Chroma levels 456: Mean=%1 High=%2
|
||||
TP_LOCALLAB_MLABEL;Restored data Min=%1 Max=%2
|
||||
TP_LOCALLAB_MLABEL_TOOLTIP;The values should be close to Min=0 Max=32768 (log mode) but other values are possible.You can adjust 'Clip restored data (gain)' and 'Offset' to normalize.\nRecovers image data without blending.
|
||||
TP_LOCALLAB_MODE_EXPERT;Advanced
|
||||
@@ -3185,7 +3193,7 @@ TP_LOCALLAB_NLDENOISENLPAT_TOOLTIP;Use this slider to adapt the amount of denois
|
||||
TP_LOCALLAB_NLDENOISENLRAD_TOOLTIP;Higher values increase denoise at the expense of processing time.
|
||||
TP_LOCALLAB_NLDENOISE_TOOLTIP;'Detail recovery' acts on a Laplacian transform to target uniform areas rather than areas with detail.
|
||||
TP_LOCALLAB_NLDET;Detail recovery
|
||||
TP_LOCALLAB_NLFRA;Non-local Means - Luminance
|
||||
TP_LOCALLAB_NLFRA;Non-local Means: Luminance
|
||||
TP_LOCALLAB_NLFRAME_TOOLTIP;Non-local means denoising takes a mean of all pixels in the image, weighted by how similar they are to the target pixel.\nReduces loss of detail compared with local mean algorithms.\nOnly luminance noise is taken into account. Chrominance noise is best processed using wavelets and Fourier transforms (DCT).\nCan be used in conjunction with 'Luminance denoise by level' or on its own.
|
||||
TP_LOCALLAB_NLGAM;Gamma
|
||||
TP_LOCALLAB_NLLUM;Strength
|
||||
|
Reference in New Issue
Block a user